linux/tools/perf/Makefile.config

1104 lines
32 KiB

tools/perf: Map the ID values with register names Map ID values with corresponding register names. These names are then displayed when user issues perf record with the -I option followed by perf report/script with -D option. To test this patchset, Eg: $ perf record -I ls # record machine state at interrupt $ perf script -D # read the perf.data file Sample output obtained for this patch / output looks like as follows: 496768515470 0x1988 [0x188]: PERF_RECORD_SAMPLE(IP, 0x1): 4522/4522: 0xc0000000001e538c period: 1 addr: 0 ... intr regs: mask 0x7ffffffffff ABI 64-bit .... r0 0xc0000000001e5e34 .... r1 0xc000000fe733f9a0 .... r2 0xc000000001523100 .... r3 0xc000000ffaadeb60 .... r4 0xc000000003456800 .... r5 0x73a9b5e000 .... r6 0x1e000000 .... r7 0x0 .... r8 0x0 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0x24022822 .... r13 0xc00000000feec180 .... r14 0x0 .... r15 0xc000001e4be18800 .... r16 0x0 .... r17 0xc000000ffaac5000 .... r18 0xc000000fe733f8a0 .... r19 0xc000000001523100 .... r20 0xc00000000009fd1c .... r21 0xc000000fcaa69000 .... r22 0xc0000000001e4968 .... r23 0xc000000001523100 .... r24 0xc000000fe733f850 .... r25 0xc000000fcaa69000 .... r26 0xc000000003b8fcf0 .... r27 0xfffffffffffffead .... r28 0x0 .... r29 0xc000000fcaa69000 .... r30 0x1 .... r31 0x0 .... nip 0xc0000000001dd320 .... msr 0x9000000000009032 .... orig_r3 0xc0000000001e538c .... ctr 0xc00000000009d550 .... link 0xc0000000001e5e34 .... xer 0x0 .... ccr 0x84022882 .... softe 0x0 .... trap 0xf01 .... dar 0x0 .... dsisr 0xf00040060000004 ... thread: :4522:4522 ...... dso: /root/.debug/.build-id/b0/ef11b1a1629e62ac9de75199117ee5ef9469e9 :4522 4522 496.768515: 1 cycles: c0000000001e538c .perf_event_context_sched_in (/boot/vmlinux) Signed-off-by: Anju T <anju@linux.vnet.ibm.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-20 10:32:47 +05:30
tools/perf: Map the ID values with register names Map ID values with corresponding register names. These names are then displayed when user issues perf record with the -I option followed by perf report/script with -D option. To test this patchset, Eg: $ perf record -I ls # record machine state at interrupt $ perf script -D # read the perf.data file Sample output obtained for this patch / output looks like as follows: 496768515470 0x1988 [0x188]: PERF_RECORD_SAMPLE(IP, 0x1): 4522/4522: 0xc0000000001e538c period: 1 addr: 0 ... intr regs: mask 0x7ffffffffff ABI 64-bit .... r0 0xc0000000001e5e34 .... r1 0xc000000fe733f9a0 .... r2 0xc000000001523100 .... r3 0xc000000ffaadeb60 .... r4 0xc000000003456800 .... r5 0x73a9b5e000 .... r6 0x1e000000 .... r7 0x0 .... r8 0x0 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0x24022822 .... r13 0xc00000000feec180 .... r14 0x0 .... r15 0xc000001e4be18800 .... r16 0x0 .... r17 0xc000000ffaac5000 .... r18 0xc000000fe733f8a0 .... r19 0xc000000001523100 .... r20 0xc00000000009fd1c .... r21 0xc000000fcaa69000 .... r22 0xc0000000001e4968 .... r23 0xc000000001523100 .... r24 0xc000000fe733f850 .... r25 0xc000000fcaa69000 .... r26 0xc000000003b8fcf0 .... r27 0xfffffffffffffead .... r28 0x0 .... r29 0xc000000fcaa69000 .... r30 0x1 .... r31 0x0 .... nip 0xc0000000001dd320 .... msr 0x9000000000009032 .... orig_r3 0xc0000000001e538c .... ctr 0xc00000000009d550 .... link 0xc0000000001e5e34 .... xer 0x0 .... ccr 0x84022882 .... softe 0x0 .... trap 0xf01 .... dar 0x0 .... dsisr 0xf00040060000004 ... thread: :4522:4522 ...... dso: /root/.debug/.build-id/b0/ef11b1a1629e62ac9de75199117ee5ef9469e9 :4522 4522 496.768515: 1 cycles: c0000000001e538c .perf_event_context_sched_in (/boot/vmlinux) Signed-off-by: Anju T <anju@linux.vnet.ibm.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-20 10:32:47 +05:30
tools/perf: Map the ID values with register names Map ID values with corresponding register names. These names are then displayed when user issues perf record with the -I option followed by perf report/script with -D option. To test this patchset, Eg: $ perf record -I ls # record machine state at interrupt $ perf script -D # read the perf.data file Sample output obtained for this patch / output looks like as follows: 496768515470 0x1988 [0x188]: PERF_RECORD_SAMPLE(IP, 0x1): 4522/4522: 0xc0000000001e538c period: 1 addr: 0 ... intr regs: mask 0x7ffffffffff ABI 64-bit .... r0 0xc0000000001e5e34 .... r1 0xc000000fe733f9a0 .... r2 0xc000000001523100 .... r3 0xc000000ffaadeb60 .... r4 0xc000000003456800 .... r5 0x73a9b5e000 .... r6 0x1e000000 .... r7 0x0 .... r8 0x0 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0x24022822 .... r13 0xc00000000feec180 .... r14 0x0 .... r15 0xc000001e4be18800 .... r16 0x0 .... r17 0xc000000ffaac5000 .... r18 0xc000000fe733f8a0 .... r19 0xc000000001523100 .... r20 0xc00000000009fd1c .... r21 0xc000000fcaa69000 .... r22 0xc0000000001e4968 .... r23 0xc000000001523100 .... r24 0xc000000fe733f850 .... r25 0xc000000fcaa69000 .... r26 0xc000000003b8fcf0 .... r27 0xfffffffffffffead .... r28 0x0 .... r29 0xc000000fcaa69000 .... r30 0x1 .... r31 0x0 .... nip 0xc0000000001dd320 .... msr 0x9000000000009032 .... orig_r3 0xc0000000001e538c .... ctr 0xc00000000009d550 .... link 0xc0000000001e5e34 .... xer 0x0 .... ccr 0x84022882 .... softe 0x0 .... trap 0xf01 .... dar 0x0 .... dsisr 0xf00040060000004 ... thread: :4522:4522 ...... dso: /root/.debug/.build-id/b0/ef11b1a1629e62ac9de75199117ee5ef9469e9 :4522 4522 496.768515: 1 cycles: c0000000001e538c .perf_event_context_sched_in (/boot/vmlinux) Signed-off-by: Anju T <anju@linux.vnet.ibm.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-20 10:32:47 +05:30
perf tools: Fix building error in x86_64 when dwarf unwind is on When build with 'make ARCH=x86' and dwarf unwind is on, there is a compiling error: CC /home/wn/perf/arch/x86/util/unwind-libdw.o CC /home/wn/perf/arch/x86/tests/regs_load.o arch/x86/tests/regs_load.S: Assembler messages: arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push' arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop' make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1 make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24! make: *** [all] Error 2 ... Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT. 'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'. However, when building x86_64 kernel, ARCH=x86 is valid and commonly used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86' to build x86_64 perf, which causes mismatching. As __LP64__ is defined for x86_64 as well, we can consolidate the __x86_64__ check to the __LP64__ check and get rid of the IS_X86_64 IMHO. (This patch is made by Namhyung Kim when replying my v1 patch: https://lkml.org/lkml/2015/1/7/17 I modified the code to remove dependency on RAW_ARCH: https://lkml.org/lkml/2015/1/7/865 Namhyung Kim didn't provide his SOB in his original email. I add mine only for my modification.) Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1421029255-23039-1-git-send-email-wangnan0@huawei.com [ Namhyung provided his S-o-B on a followup to this patch thread on lkml ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-12 10:20:55 +08:00
perf unwind: Do not put libunwind-{x86,aarch64} in FEATURE_TESTS_BASIC As it is not normally available on x86_64 not being tested on test-all.c but being in FEATURE_TESTS_BASIC ends up implying that those features are present, which leads to trying to link with those libraries and a build failure now that test-all.c is finally again building successfully: /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 collect2: error: ld returned 1 exit status make[3]: *** [Makefile:199: /tmp/build/perf/plugin_jbd2.so] Error 1 make[3]: *** Waiting for unfinished jobs.... /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 So remove those features from there and explicitely test them. And then move this patch to just before the last one that allows this to be exposed, so that we keep the tree bisectable. With all this in place we get, at this point: $ ldd /tmp/build/perf/feature/test-libunwind.bin linux-vdso.so.1 (0x00007fffa09c6000) libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007fbcf4451000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007fbcf4435000) liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fbcf440c000) libelf.so.1 => /lib64/libelf.so.1 (0x00007fbcf43f2000) libc.so.6 => /lib64/libc.so.6 (0x00007fbcf422c000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fbcf4211000) /lib64/ld-linux-x86-64.so.2 (0x00007fbcf4491000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fbcf41ed000) libz.so.1 => /lib64/libz.so.1 (0x00007fbcf41d3000) $ cat /tmp/build/perf/feature/test-libunwind-x86.make.output test-libunwind-x86.c:2:10: fatal error: libunwind-x86.h: No such file or directory #include <libunwind-x86.h> ^~~~~~~~~~~~~~~~~ compilation terminated. $ cat /tmp/build/perf/feature/test-libunwind-aarch64.make.output test-libunwind-aarch64.c:2:10: fatal error: libunwind-aarch64.h: No such file or directory #include <libunwind-aarch64.h> ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. $ $ ldd ~/bin/perf | grep unwind libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f5ceb24b000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f5ceb22f000) $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/n/tip-vs6kwqsvwk7oxhs6z9mq87pp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-12 16:34:32 -03:00
perf build: Add missing FEATURE_CHECK_LDFLAGS-libcrypto When the libcrypto feature test was added we forgot to add its FEATURE_CHECK_LDFLAGS pointing to the library needed to link with the test-all.bin feature test fast path binary, so even when it was introduced we got this: $ cat /tmp/build/perf/feature/test-all.make.output /usr/bin/ld: /tmp/ccjKeJJU.o: in function `main_test_libcrypto': /home/acme/git/perf/tools/build/feature/test-libcrypto.c:10: undefined reference to `MD5_Init' /usr/bin/ld: /home/acme/git/perf/tools/build/feature/test-libcrypto.c:11: undefined reference to `MD5_Update' /usr/bin/ld: /home/acme/git/perf/tools/build/feature/test-libcrypto.c:12: undefined reference to `MD5_Final' /usr/bin/ld: /home/acme/git/perf/tools/build/feature/test-libcrypto.c:14: undefined reference to `SHA1' collect2: error: ld returned 1 exit status $ cat /tmp/build/perf/feature/test-libcrypto. test-libcrypto.bin test-libcrypto.d test-libcrypto.make.output $ cat /tmp/build/perf/feature/test-libcrypto.make.output $ Fix it, so that we keep the fast path, which, at this point, will fail with the unwind-ARCH feature tests, that will be fixed in a followup patch: $ make -C tools/perf O=/tmp/build/perf ... libcrypto: [ on ] <SNIP> $ cat /tmp/build/perf/feature/test-all.make.output $ ldd /tmp/build/perf/feature/test-all.bin | grep libcrypto libcrypto.so.1.1 => /lib64/libcrypto.so.1.1 (0x00007f9892805000) $ $ grep libcrypto /tmp/build/perf/FEATURE-DUMP feature-libcrypto=1 $ With the unwind-ARCH tests fixed, we now finally manage to get test-all.bin built and linked with the features it tests, among them the ones fixed in this patchkit: $ ldd /tmp/build/perf/feature/test-all.bin | egrep 'unwind|crypto' libcrypto.so.1.1 => /lib64/libcrypto.so.1.1 (0x00007f95cf2b8000) libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f95cf294000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f95cf278000) $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Fixes: 8ee4646038e4 ("perf build: Add libcrypto feature detection") Link: https://lkml.kernel.org/n/tip-rexc248jorf5b4l3qjn888cz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-12 16:19:45 -03:00
perf tools: Add feature check for libbabeltrace Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches. The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like: $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libbabeltrace: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libunwind NOTE The installation of the [1] to to used by above make: $ git clone git://git.efficios.com/babeltrace.git $ cd babeltrace $ vim README $ ./bootstrap $ ./configure --prefix=/opt/libbabeltrace $ make prefix=/opt/libbabeltrace $ sudo make install prefix=/opt/libbabeltrace Please make sure that the /opt/libbabeltrace/lib directory is in your LD_LIBRARY_PATH: $ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib [1] babeltrace - http://www.efficios.com/babeltrace [2] Common Trace Format - http://www.efficios.com/ctf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ Added missing babeltrace build instructions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 23:16:58 +01:00
perf tools: Add feature check for libbabeltrace Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches. The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like: $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libbabeltrace: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libunwind NOTE The installation of the [1] to to used by above make: $ git clone git://git.efficios.com/babeltrace.git $ cd babeltrace $ vim README $ ./bootstrap $ ./configure --prefix=/opt/libbabeltrace $ make prefix=/opt/libbabeltrace $ sudo make install prefix=/opt/libbabeltrace Please make sure that the /opt/libbabeltrace/lib directory is in your LD_LIBRARY_PATH: $ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib [1] babeltrace - http://www.efficios.com/babeltrace [2] Common Trace Format - http://www.efficios.com/ctf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ Added missing babeltrace build instructions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 23:16:58 +01:00
perf build: Check what binutils's 'disassembler()' signature to use Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature, so we must use the feature test introduced in fb982666e380 ("tools/bpftool: fix bpftool build with bintutils >= 2.9") to deal with that. Committer testing: After adding the missing function call to test-all.c, and: FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes And the fallbacks for cases where we need -liberty and sometimes -lz to tools/perf/Makefile.config, we get: $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... disassembler-four-args: [ on ] CC /tmp/build/perf/jvmti/libjvmti.o CC /tmp/build/perf/builtin-bench.o <SNIP> $ $ The feature detection test-all.bin gets successfully built and linked: $ ls -la /tmp/build/perf/feature/test-all.bin -rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin $ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler 0000000000061f90 T disassembler $ Time to move on to the patches that make use of this disassembler() routine in binutils's libopcodes. Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <guro@fb.com> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com [ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-11 22:30:48 -07:00
tools build feature: Check if eventfd() is available A new 'perf bench epoll' will use this, and to disable it for older systems, add a feature test for this API. This is just a simple program that if successfully compiled, means that the feature is present, at least at the library level, in a build that sets the output directory to /tmp/build/perf (using O=/tmp/build/perf), we end up with: $ ls -la /tmp/build/perf/feature/test-eventfd* -rwxrwxr-x. 1 acme acme 8176 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.bin -rw-rw-r--. 1 acme acme 588 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.d -rw-rw-r--. 1 acme acme 0 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.make.output $ ldd /tmp/build/perf/feature/test-eventfd.bin linux-vdso.so.1 (0x00007fff3bf3f000) libc.so.6 => /lib64/libc.so.6 (0x00007fa984061000) /lib64/ld-linux-x86-64.so.2 (0x00007fa984417000) $ grep eventfd -A 2 -B 2 /tmp/build/perf/FEATURE-DUMP feature-dwarf=1 feature-dwarf_getlocations=1 feature-eventfd=1 feature-fortify-source=1 feature-sync-compare-and-swap=1 $ The main thing here is that in the end we'll have -DHAVE_EVENTFD in CFLAGS, and then the 'perf bench' entry needing that API can be selectively pruned. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Ahern <dsahern@gmail.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-wkeldwob7dpx6jvtuzl8164k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-21 17:42:00 -03:00
tools build: Check if gettid() is available before providing helper Laura reported that the perf build failed in fedora when we got a glibc that provides gettid(), which I reproduced using fedora rawhide with the glibc-devel-2.29.9000-26.fc31.x86_64 package. Add a feature check to avoid providing a gettid() helper in such systems. On a fedora rawhide system with this patch applied we now get: [root@7a5f55352234 perf]# grep gettid /tmp/build/perf/FEATURE-DUMP feature-gettid=1 [root@7a5f55352234 perf]# cat /tmp/build/perf/feature/test-gettid.make.output [root@7a5f55352234 perf]# ldd /tmp/build/perf/feature/test-gettid.bin linux-vdso.so.1 (0x00007ffc6b1f6000) libc.so.6 => /lib64/libc.so.6 (0x00007f04e0a74000) /lib64/ld-linux-x86-64.so.2 (0x00007f04e0c47000) [root@7a5f55352234 perf]# nm /tmp/build/perf/feature/test-gettid.bin | grep -w gettid U gettid@@GLIBC_2.30 [root@7a5f55352234 perf]# While on a fedora:29 system: [acme@quaco perf]$ grep gettid /tmp/build/perf/FEATURE-DUMP feature-gettid=0 [acme@quaco perf]$ cat /tmp/build/perf/feature/test-gettid.make.output test-gettid.c: In function ‘main’: test-gettid.c:8:9: error: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Werror=implicit-function-declaration] return gettid(); ^~~~~~ getgid cc1: all warnings being treated as errors [acme@quaco perf]$ Reported-by: Laura Abbott <labbott@redhat.com> Tested-by: Laura Abbott <labbott@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lkml.kernel.org/n/tip-yfy3ch53agmklwu9o7rlgf9c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-13 12:04:19 -03:00
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 12:41:12 +00:00
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 12:41:12 +00:00
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:58 +01:00
tools build feature: Check if libaio is available This will be used by 'perf record' to speed up reading the perf ring buffer. Committer testing: $ make -C tools/perf O=/tmp/build/perf make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] $ ls -la /tmp/build/perf/feature/test-libaio.* -rwxrwxr-x. 1 acme acme 18296 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.bin -rw-rw-r--. 1 acme acme 1165 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.d -rw-rw-r--. 1 acme acme 0 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.make.output $ $ grep -i aio /tmp/build/perf/FEATURE-DUMP feature-libaio=1 $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5fcda10c-6c63-68df-383a-c6d9e5d1f918@linux.intel.com [ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-06 12:03:35 +03:00
perf coresight: Do not test for libopencsd by default Since it is not yet that generally available, avoid testing for the presence of libcoresight in the fast path test-all.bin feature test. # dnf search opencsd No matches found. # dnf search OpenCSD No matches found. # cat /etc/fedora-release Fedora release 29 (Twenty Nine) # I.e. right now, in my system test-all.bin is failing all the time since Fedora29 doesn't have libopencsd available: $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:174: test-libopencsd.c:2:10: fatal error: opencsd/c_api/opencsd_c_api.h: No such file or directory #include <opencsd/c_api/opencsd_c_api.h> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. See: 6ab2b762befd ("perf build: Disable libbabeltrace check by default") For the rationale, as soon as libopencsd becomes more generally packaged and available, we do the same thing we did with babeltrace, enabling it by default, as done in: 24787afbcd01 ("perf tools: Enable LIBBABELTRACE by default") For now, to explicitely ask for opencsd, make sure you have it installed and use: make -C tools/perf CORESIGHT=1 The feature test output will be there as an empty file: $ ls -la /tmp/build/perf/feature/test-libopencsd.make.output Because the binary used for the feature check was successfully built: $ ls -la /tmp/build/perf/feature/test-libopencsd.bin -rwxrwxr-x. 1 acme acme 18336 Feb 12 14:49 /tmp/build/perf/feature/test-libopencsd.bin $ ldd /tmp/build/perf/feature/test-libopencsd.bin linux-vdso.so.1 (0x00007fffe18cc000) libopencsd_c_api.so.0 => /lib64/libopencsd_c_api.so.0 (0x00007fb8e67f6000) libopencsd.so.0 => /lib64/libopencsd.so.0 (0x00007fb8e676f000) libc.so.6 => /lib64/libc.so.6 (0x00007fb8e65a9000) libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007fb8e6411000) libm.so.6 => /lib64/libm.so.6 (0x00007fb8e628d000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fb8e6272000) /lib64/ld-linux-x86-64.so.2 (0x00007fb8e6828000) $ And the resulting perf binary will be linked with it: -rw-rw-r--. 1 acme acme 0 Feb 12 14:49 /tmp/build/perf/feature/test-libopencsd.make.output $ ldd ~/bin/perf | grep opencsd libopencsd_c_api.so.0 => /lib64/libopencsd_c_api.so.0 (0x00007fd43097f000) libopencsd.so.0 => /lib64/libopencsd.so.0 (0x00007fd4308f8000) $ To make sure this gets built before pushing things upstream I have a ubuntu:19.04-x-arm64 container that has: [root@quaco x-arm64]# grep CORESIGHT Dockerfile ENV EXTRA_MAKE_ARGS=CORESIGHT=1 [root@quaco x-arm64]# So that I always build with libopencsd before pushing things upstream. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Link: https://lkml.kernel.org/n/tip-20vyy39jw9jgrijesi30fgox@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-12 14:37:15 -03:00
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 12:41:12 +00:00
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 12:41:12 +00:00
perf unwind: Do not put libunwind-{x86,aarch64} in FEATURE_TESTS_BASIC As it is not normally available on x86_64 not being tested on test-all.c but being in FEATURE_TESTS_BASIC ends up implying that those features are present, which leads to trying to link with those libraries and a build failure now that test-all.c is finally again building successfully: /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 collect2: error: ld returned 1 exit status make[3]: *** [Makefile:199: /tmp/build/perf/plugin_jbd2.so] Error 1 make[3]: *** Waiting for unfinished jobs.... /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 So remove those features from there and explicitely test them. And then move this patch to just before the last one that allows this to be exposed, so that we keep the tree bisectable. With all this in place we get, at this point: $ ldd /tmp/build/perf/feature/test-libunwind.bin linux-vdso.so.1 (0x00007fffa09c6000) libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007fbcf4451000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007fbcf4435000) liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fbcf440c000) libelf.so.1 => /lib64/libelf.so.1 (0x00007fbcf43f2000) libc.so.6 => /lib64/libc.so.6 (0x00007fbcf422c000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fbcf4211000) /lib64/ld-linux-x86-64.so.2 (0x00007fbcf4491000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fbcf41ed000) libz.so.1 => /lib64/libz.so.1 (0x00007fbcf41d3000) $ cat /tmp/build/perf/feature/test-libunwind-x86.make.output test-libunwind-x86.c:2:10: fatal error: libunwind-x86.h: No such file or directory #include <libunwind-x86.h> ^~~~~~~~~~~~~~~~~ compilation terminated. $ cat /tmp/build/perf/feature/test-libunwind-aarch64.make.output test-libunwind-aarch64.c:2:10: fatal error: libunwind-aarch64.h: No such file or directory #include <libunwind-aarch64.h> ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. $ $ ldd ~/bin/perf | grep unwind libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f5ceb24b000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f5ceb22f000) $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/n/tip-vs6kwqsvwk7oxhs6z9mq87pp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-12 16:34:32 -03:00
perf unwind: Fix compile error for static cross build Build failure for static cross-compiling on aarch64, with libunwind-x86 provided: $ file ./libunwind_for_x86_on_aarch64/lib/libunwind-x86.so.8.0.1 libunwind-x86.so.8.0.1: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, not stripped $ make LDFLAGS=-static LIBUNWIND_DIR=./libunwind_for_x86_on_aarch64 ARCH=aarch64 CROSS_COMPILE=aarch64-buildroot-linux-gnu- ~/libperf.a(libperf-in.o): In function `find_proc_info': :(.text+0xae4ac): undefined reference to `_Ux86_dwarf_search_unwind_table' ~/libperf.a(libperf-in.o): In function `_unwind__prepare_access': :(.text+0xaedd0): undefined reference to `_Ux86_create_addr_space' :(.text+0xaee24): undefined reference to `_Ux86_set_caching_policy' ~/libperf.a(libperf-in.o): In function `_unwind__flush_access': :(.text+0xaee98): undefined reference to `_Ux86_flush_cache' ~/libperf.a(libperf-in.o): In function `_unwind__finish_access': :(.text+0xaef08): undefined reference to `_Ux86_destroy_addr_space' ~/libperf.a(libperf-in.o): In function `get_entries': :(.text+0xaf148): undefined reference to `_Ux86_init_remote' :(.text+0xaf184): undefined reference to `_Ux86_get_reg' :(.text+0xaf1a4): undefined reference to `_Ux86_step' collect2: error: ld returned 1 exit status Makefile.perf:350: recipe for target '~/perf' failed make[1]: *** [~/perf] Error 1 Makefile:68: recipe for target 'all' failed make: *** [all] Error 2 This is because the remote libunwind library detected is not appended to EXTLIBS variable, which will be included between 'start-group' and 'end-group' when linking. The existing variable LIBUNWIND_LIBS is assigned to libs for local unwind, this patch introduces a new variable EXTLIBS_LIBUNWIND for storing remote libunwind libraries instead. Signed-off-by: He Kuang <hekuang@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1465988636-81502-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 11:03:56 +00:00
perf unwind: Do not put libunwind-{x86,aarch64} in FEATURE_TESTS_BASIC As it is not normally available on x86_64 not being tested on test-all.c but being in FEATURE_TESTS_BASIC ends up implying that those features are present, which leads to trying to link with those libraries and a build failure now that test-all.c is finally again building successfully: /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 collect2: error: ld returned 1 exit status make[3]: *** [Makefile:199: /tmp/build/perf/plugin_jbd2.so] Error 1 make[3]: *** Waiting for unfinished jobs.... /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 So remove those features from there and explicitely test them. And then move this patch to just before the last one that allows this to be exposed, so that we keep the tree bisectable. With all this in place we get, at this point: $ ldd /tmp/build/perf/feature/test-libunwind.bin linux-vdso.so.1 (0x00007fffa09c6000) libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007fbcf4451000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007fbcf4435000) liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fbcf440c000) libelf.so.1 => /lib64/libelf.so.1 (0x00007fbcf43f2000) libc.so.6 => /lib64/libc.so.6 (0x00007fbcf422c000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fbcf4211000) /lib64/ld-linux-x86-64.so.2 (0x00007fbcf4491000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fbcf41ed000) libz.so.1 => /lib64/libz.so.1 (0x00007fbcf41d3000) $ cat /tmp/build/perf/feature/test-libunwind-x86.make.output test-libunwind-x86.c:2:10: fatal error: libunwind-x86.h: No such file or directory #include <libunwind-x86.h> ^~~~~~~~~~~~~~~~~ compilation terminated. $ cat /tmp/build/perf/feature/test-libunwind-aarch64.make.output test-libunwind-aarch64.c:2:10: fatal error: libunwind-aarch64.h: No such file or directory #include <libunwind-aarch64.h> ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. $ $ ldd ~/bin/perf | grep unwind libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f5ceb24b000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f5ceb22f000) $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/n/tip-vs6kwqsvwk7oxhs6z9mq87pp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-12 16:34:32 -03:00
perf unwind: Fix compile error for static cross build Build failure for static cross-compiling on aarch64, with libunwind-x86 provided: $ file ./libunwind_for_x86_on_aarch64/lib/libunwind-x86.so.8.0.1 libunwind-x86.so.8.0.1: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, not stripped $ make LDFLAGS=-static LIBUNWIND_DIR=./libunwind_for_x86_on_aarch64 ARCH=aarch64 CROSS_COMPILE=aarch64-buildroot-linux-gnu- ~/libperf.a(libperf-in.o): In function `find_proc_info': :(.text+0xae4ac): undefined reference to `_Ux86_dwarf_search_unwind_table' ~/libperf.a(libperf-in.o): In function `_unwind__prepare_access': :(.text+0xaedd0): undefined reference to `_Ux86_create_addr_space' :(.text+0xaee24): undefined reference to `_Ux86_set_caching_policy' ~/libperf.a(libperf-in.o): In function `_unwind__flush_access': :(.text+0xaee98): undefined reference to `_Ux86_flush_cache' ~/libperf.a(libperf-in.o): In function `_unwind__finish_access': :(.text+0xaef08): undefined reference to `_Ux86_destroy_addr_space' ~/libperf.a(libperf-in.o): In function `get_entries': :(.text+0xaf148): undefined reference to `_Ux86_init_remote' :(.text+0xaf184): undefined reference to `_Ux86_get_reg' :(.text+0xaf1a4): undefined reference to `_Ux86_step' collect2: error: ld returned 1 exit status Makefile.perf:350: recipe for target '~/perf' failed make[1]: *** [~/perf] Error 1 Makefile:68: recipe for target 'all' failed make: *** [all] Error 2 This is because the remote libunwind library detected is not appended to EXTLIBS variable, which will be included between 'start-group' and 'end-group' when linking. The existing variable LIBUNWIND_LIBS is assigned to libs for local unwind, this patch introduces a new variable EXTLIBS_LIBUNWIND for storing remote libunwind libraries instead. Signed-off-by: He Kuang <hekuang@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1465988636-81502-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 11:03:56 +00:00
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:58 +01:00
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:58 +01:00
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:58 +01:00
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 12:41:12 +00:00
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:58 +01:00
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-11-14 08:51:29 +09:00
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:58 +01:00
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:58 +01:00
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:58 +01:00
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:58 +01:00
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:58 +01:00
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-11-14 08:51:29 +09:00
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:58 +01:00
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:58 +01:00
perf unwind: Fix compile error for static cross build Build failure for static cross-compiling on aarch64, with libunwind-x86 provided: $ file ./libunwind_for_x86_on_aarch64/lib/libunwind-x86.so.8.0.1 libunwind-x86.so.8.0.1: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, not stripped $ make LDFLAGS=-static LIBUNWIND_DIR=./libunwind_for_x86_on_aarch64 ARCH=aarch64 CROSS_COMPILE=aarch64-buildroot-linux-gnu- ~/libperf.a(libperf-in.o): In function `find_proc_info': :(.text+0xae4ac): undefined reference to `_Ux86_dwarf_search_unwind_table' ~/libperf.a(libperf-in.o): In function `_unwind__prepare_access': :(.text+0xaedd0): undefined reference to `_Ux86_create_addr_space' :(.text+0xaee24): undefined reference to `_Ux86_set_caching_policy' ~/libperf.a(libperf-in.o): In function `_unwind__flush_access': :(.text+0xaee98): undefined reference to `_Ux86_flush_cache' ~/libperf.a(libperf-in.o): In function `_unwind__finish_access': :(.text+0xaef08): undefined reference to `_Ux86_destroy_addr_space' ~/libperf.a(libperf-in.o): In function `get_entries': :(.text+0xaf148): undefined reference to `_Ux86_init_remote' :(.text+0xaf184): undefined reference to `_Ux86_get_reg' :(.text+0xaf1a4): undefined reference to `_Ux86_step' collect2: error: ld returned 1 exit status Makefile.perf:350: recipe for target '~/perf' failed make[1]: *** [~/perf] Error 1 Makefile:68: recipe for target 'all' failed make: *** [all] Error 2 This is because the remote libunwind library detected is not appended to EXTLIBS variable, which will be included between 'start-group' and 'end-group' when linking. The existing variable LIBUNWIND_LIBS is assigned to libs for local unwind, this patch introduces a new variable EXTLIBS_LIBUNWIND for storing remote libunwind libraries instead. Signed-off-by: He Kuang <hekuang@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1465988636-81502-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 11:03:56 +00:00
perf build: Handle slang being in /usr/include and in /usr/include/slang/ In some distros slang.h may be in a /usr/include 'slang' subdir, so use the if slang is not explicitely disabled (by using NO_SLANG=1) and its feature test for the common case (having /usr/include/slang.h) failed, use the results for the test that checks if it is in slang/slang.h. Change the only file in perf that includes slang.h to use HAVE_SLANG_INCLUDE_SUBDIR and forget about this for good. On a rhel6 system now we have: $ /tmp/build/perf/perf -vv | grep slang libslang: [ on ] # HAVE_SLANG_SUPPORT $ ldd /tmp/build/perf/perf | grep libslang libslang.so.2 => /usr/lib64/libslang.so.2 (0x00007fa2d5a8d000) $ grep slang /tmp/build/perf/FEATURE-DUMP feature-libslang=0 feature-libslang-include-subdir=1 $ cat /etc/redhat-release CentOS release 6.10 (Final) $ While on fedora:29: $ /tmp/build/perf/perf -vv | grep slang libslang: [ on ] # HAVE_SLANG_SUPPORT $ ldd /tmp/build/perf/perf | grep slang libslang.so.2 => /lib64/libslang.so.2 (0x00007f8eb11a7000) $ grep slang /tmp/build/perf/FEATURE-DUMP feature-libslang=1 feature-libslang-include-subdir=1 $ $ cat /etc/fedora-release Fedora release 29 (Twenty Nine) $ The feature-libslang-include-subdir=1 line is because the 'gettid()' test was added to test-all.c as the new glibc has an implementation for that, so we soon should have it not failing, i.e. should be the common case soon. Perhaps I should move it out till it becomes the norm... Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 1955c8cf5e26 ("perf tools: Don't hardcode host include path for libslang") Link: https://lkml.kernel.org/n/tip-bkgtpsu3uit821fuwsdhj9gd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-18 17:48:12 -03:00
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz Current libbfd feature test unconditionally links against -liberty and -lz. While it's required on some systems (e.g. opensuse), it's completely unnecessary on the others, where only -lbdf is sufficient (debian). This patch streamlines (and renames) the following feature checks: feature-libbfd - only link against -lbfd (debian), see commit 2cf9040714f3 ("perf tools: Fix bfd dependency libraries detection") feature-libbfd-liberty - link against -lbfd and -liberty feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse), see commit 280e7c48c3b8 ("perf tools: fix BFD detection on opensuse") (feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z} for clarity) The main motivation is to fix this feature test for bpftool which is currently broken on debian (libbfd feature shows OFF, but we still unconditionally link against -lbfd and it works). Tested on debian with only -lbfd installed (without -liberty); I'd appreciate if somebody on the other systems can test this new detection method. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-15 16:32:01 -08:00
perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz Current libbfd feature test unconditionally links against -liberty and -lz. While it's required on some systems (e.g. opensuse), it's completely unnecessary on the others, where only -lbdf is sufficient (debian). This patch streamlines (and renames) the following feature checks: feature-libbfd - only link against -lbfd (debian), see commit 2cf9040714f3 ("perf tools: Fix bfd dependency libraries detection") feature-libbfd-liberty - link against -lbfd and -liberty feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse), see commit 280e7c48c3b8 ("perf tools: fix BFD detection on opensuse") (feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z} for clarity) The main motivation is to fix this feature test for bpftool which is currently broken on debian (libbfd feature shows OFF, but we still unconditionally link against -lbfd and it works). Tested on debian with only -lbfd installed (without -liberty); I'd appreciate if somebody on the other systems can test this new detection method. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-15 16:32:01 -08:00
perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz Current libbfd feature test unconditionally links against -liberty and -lz. While it's required on some systems (e.g. opensuse), it's completely unnecessary on the others, where only -lbdf is sufficient (debian). This patch streamlines (and renames) the following feature checks: feature-libbfd - only link against -lbfd (debian), see commit 2cf9040714f3 ("perf tools: Fix bfd dependency libraries detection") feature-libbfd-liberty - link against -lbfd and -liberty feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse), see commit 280e7c48c3b8 ("perf tools: fix BFD detection on opensuse") (feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z} for clarity) The main motivation is to fix this feature test for bpftool which is currently broken on debian (libbfd feature shows OFF, but we still unconditionally link against -lbfd and it works). Tested on debian with only -lbfd installed (without -liberty); I'd appreciate if somebody on the other systems can test this new detection method. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-15 16:32:01 -08:00
perf build: Check what binutils's 'disassembler()' signature to use Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature, so we must use the feature test introduced in fb982666e380 ("tools/bpftool: fix bpftool build with bintutils >= 2.9") to deal with that. Committer testing: After adding the missing function call to test-all.c, and: FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes And the fallbacks for cases where we need -liberty and sometimes -lz to tools/perf/Makefile.config, we get: $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... disassembler-four-args: [ on ] CC /tmp/build/perf/jvmti/libjvmti.o CC /tmp/build/perf/builtin-bench.o <SNIP> $ $ The feature detection test-all.bin gets successfully built and linked: $ ls -la /tmp/build/perf/feature/test-all.bin -rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin $ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler 0000000000061f90 T disassembler $ Time to move on to the patches that make use of this disassembler() routine in binutils's libopcodes. Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <guro@fb.com> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com [ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-11 22:30:48 -07:00
perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz Current libbfd feature test unconditionally links against -liberty and -lz. While it's required on some systems (e.g. opensuse), it's completely unnecessary on the others, where only -lbdf is sufficient (debian). This patch streamlines (and renames) the following feature checks: feature-libbfd - only link against -lbfd (debian), see commit 2cf9040714f3 ("perf tools: Fix bfd dependency libraries detection") feature-libbfd-liberty - link against -lbfd and -liberty feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse), see commit 280e7c48c3b8 ("perf tools: fix BFD detection on opensuse") (feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z} for clarity) The main motivation is to fix this feature test for bpftool which is currently broken on debian (libbfd feature shows OFF, but we still unconditionally link against -lbfd and it works). Tested on debian with only -lbfd installed (without -liberty); I'd appreciate if somebody on the other systems can test this new detection method. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-15 16:32:01 -08:00
perf build: Check what binutils's 'disassembler()' signature to use Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature, so we must use the feature test introduced in fb982666e380 ("tools/bpftool: fix bpftool build with bintutils >= 2.9") to deal with that. Committer testing: After adding the missing function call to test-all.c, and: FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes And the fallbacks for cases where we need -liberty and sometimes -lz to tools/perf/Makefile.config, we get: $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... disassembler-four-args: [ on ] CC /tmp/build/perf/jvmti/libjvmti.o CC /tmp/build/perf/builtin-bench.o <SNIP> $ $ The feature detection test-all.bin gets successfully built and linked: $ ls -la /tmp/build/perf/feature/test-all.bin -rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin $ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler 0000000000061f90 T disassembler $ Time to move on to the patches that make use of this disassembler() routine in binutils's libopcodes. Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <guro@fb.com> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com [ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-11 22:30:48 -07:00
perf build: Check what binutils's 'disassembler()' signature to use Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature, so we must use the feature test introduced in fb982666e380 ("tools/bpftool: fix bpftool build with bintutils >= 2.9") to deal with that. Committer testing: After adding the missing function call to test-all.c, and: FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes And the fallbacks for cases where we need -liberty and sometimes -lz to tools/perf/Makefile.config, we get: $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... disassembler-four-args: [ on ] CC /tmp/build/perf/jvmti/libjvmti.o CC /tmp/build/perf/builtin-bench.o <SNIP> $ $ The feature detection test-all.bin gets successfully built and linked: $ ls -la /tmp/build/perf/feature/test-all.bin -rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin $ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler 0000000000061f90 T disassembler $ Time to move on to the patches that make use of this disassembler() routine in binutils's libopcodes. Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <guro@fb.com> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com [ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-11 22:30:48 -07:00
perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz Current libbfd feature test unconditionally links against -liberty and -lz. While it's required on some systems (e.g. opensuse), it's completely unnecessary on the others, where only -lbdf is sufficient (debian). This patch streamlines (and renames) the following feature checks: feature-libbfd - only link against -lbfd (debian), see commit 2cf9040714f3 ("perf tools: Fix bfd dependency libraries detection") feature-libbfd-liberty - link against -lbfd and -liberty feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse), see commit 280e7c48c3b8 ("perf tools: fix BFD detection on opensuse") (feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z} for clarity) The main motivation is to fix this feature test for bpftool which is currently broken on debian (libbfd feature shows OFF, but we still unconditionally link against -lbfd and it works). Tested on debian with only -lbfd installed (without -liberty); I'd appreciate if somebody on the other systems can test this new detection method. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-15 16:32:01 -08:00
perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz Current libbfd feature test unconditionally links against -liberty and -lz. While it's required on some systems (e.g. opensuse), it's completely unnecessary on the others, where only -lbdf is sufficient (debian). This patch streamlines (and renames) the following feature checks: feature-libbfd - only link against -lbfd (debian), see commit 2cf9040714f3 ("perf tools: Fix bfd dependency libraries detection") feature-libbfd-liberty - link against -lbfd and -liberty feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse), see commit 280e7c48c3b8 ("perf tools: fix BFD detection on opensuse") (feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z} for clarity) The main motivation is to fix this feature test for bpftool which is currently broken on debian (libbfd feature shows OFF, but we still unconditionally link against -lbfd and it works). Tested on debian with only -lbfd installed (without -liberty); I'd appreciate if somebody on the other systems can test this new detection method. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-15 16:32:01 -08:00
perf tools: Add gzip decompression support for kernel module Now my Archlinux box shows module symbols correctly. Before: $ perf report --stdio Failed to open /tmp/perf-3477.map, continuing without symbols no symbols found in /usr/bin/date, maybe install a debug package? No kallsyms or vmlinux with build-id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 was found [drm] with build id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 not found, continuing without symbols No kallsyms or vmlinux with build-id edd931629094b660ca9dec09a1b635c8d87aa2ee was found [jbd2] with build id edd931629094b660ca9dec09a1b635c8d87aa2ee not found, continuing without symbols No kallsyms or vmlinux with build-id a7b1eada671c34933e5610bb920b2ca4945a82c3 was found [ext4] with build id a7b1eada671c34933e5610bb920b2ca4945a82c3 not found, continuing without symbols No kallsyms or vmlinux with build-id d69511fa3e5840e770336ef45b06c83fef8d74e3 was found [scsi_mod] with build id d69511fa3e5840e770336ef45b06c83fef8d74e3 not found, continuing without symbols No kallsyms or vmlinux with build-id af0430af13461af058770ee9b87afc07922c2e77 was found [libata] with build id af0430af13461af058770ee9b87afc07922c2e77 not found, continuing without symbols No kallsyms or vmlinux with build-id aaeedff8160ce631a5f0333591c6ff291201d29f was found [libahci] with build id aaeedff8160ce631a5f0333591c6ff291201d29f not found, continuing without symbols No kallsyms or vmlinux with build-id c57907712becaf662dc4981824bb372c0441d605 was found [mac80211] with build id c57907712becaf662dc4981824bb372c0441d605 not found, continuing without symbols No kallsyms or vmlinux with build-id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f was found [iwldvm] with build id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f not found, continuing without symbols No kallsyms or vmlinux with build-id 2d86086bf136bf374a2f029cf85a48194f9b950b was found [cfg80211] with build id 2d86086bf136bf374a2f029cf85a48194f9b950b not found, continuing without symbols No kallsyms or vmlinux with build-id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 was found [iwlwifi] with build id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 not found, continuing without symbols ... # # Overhead Command Shared Object Symbol # ........ ............... ....................... ........................................................ # 0.03% swapper [ext4] [k] 0x000000000000fe2e 0.03% swapper [kernel.kallsyms] [k] account_entity_enqueue 0.03% swapper [ext4] [k] 0x000000000000fc2b 0.03% irq/50-iwlwifi [iwlwifi] [k] 0x000000000000200b 0.03% swapper [kernel.kallsyms] [k] ktime_add_safe 0.03% swapper [kernel.kallsyms] [k] elv_completed_request 0.03% swapper [libata] [k] 0x0000000000003997 0.03% swapper [libahci] [k] 0x0000000000001f25 0.03% swapper [kernel.kallsyms] [k] rb_next 0.03% swapper [kernel.kallsyms] [k] blk_finish_request 0.03% swapper [ext4] [k] 0x0000000000010248 0.00% perf [kernel.kallsyms] [k] native_write_msr_safe After: $ perf report --stdio Failed to open /tmp/perf-3477.map, continuing without symbols no symbols found in /usr/bin/tr, maybe install a debug package? ... # # Overhead Command Shared Object Symbol # ........ ............... ........................... ...................................................... # 0.04% kworker/u16:3 [ext4] [k] ext4_read_block_bitmap 0.03% kworker/u16:0 [mac80211] [k] ieee80211_sta_reset_beacon_monitor 0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_get_bssid 0.02% firefox [e1000e] [k] __ew32_prepare 0.02% swapper [libahci] [k] ahci_handle_port_interrupt 0.02% emacs libglib-2.0.so.0.4000.0 [.] g_mutex_unlock 0.02% swapper [e1000e] [k] e1000_clean_tx_irq 0.02% dwm [kernel.kallsyms] [k] __schedule 0.02% gnome-terminal- [vdso] [.] __vdso_clock_gettime 0.02% swapper [e1000e] [k] e1000_alloc_rx_buffers 0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_rx 0.01% firefox [vdso] [.] __vdso_gettimeofday 0.01% irq/50-iwlwifi [iwlwifi] [k] iwl_pcie_rxq_restock.part.13 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/87h9yexshi.fsf@sejong.aot.lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-31 16:51:38 +09:00
perf tools: Add gzip decompression support for kernel module Now my Archlinux box shows module symbols correctly. Before: $ perf report --stdio Failed to open /tmp/perf-3477.map, continuing without symbols no symbols found in /usr/bin/date, maybe install a debug package? No kallsyms or vmlinux with build-id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 was found [drm] with build id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 not found, continuing without symbols No kallsyms or vmlinux with build-id edd931629094b660ca9dec09a1b635c8d87aa2ee was found [jbd2] with build id edd931629094b660ca9dec09a1b635c8d87aa2ee not found, continuing without symbols No kallsyms or vmlinux with build-id a7b1eada671c34933e5610bb920b2ca4945a82c3 was found [ext4] with build id a7b1eada671c34933e5610bb920b2ca4945a82c3 not found, continuing without symbols No kallsyms or vmlinux with build-id d69511fa3e5840e770336ef45b06c83fef8d74e3 was found [scsi_mod] with build id d69511fa3e5840e770336ef45b06c83fef8d74e3 not found, continuing without symbols No kallsyms or vmlinux with build-id af0430af13461af058770ee9b87afc07922c2e77 was found [libata] with build id af0430af13461af058770ee9b87afc07922c2e77 not found, continuing without symbols No kallsyms or vmlinux with build-id aaeedff8160ce631a5f0333591c6ff291201d29f was found [libahci] with build id aaeedff8160ce631a5f0333591c6ff291201d29f not found, continuing without symbols No kallsyms or vmlinux with build-id c57907712becaf662dc4981824bb372c0441d605 was found [mac80211] with build id c57907712becaf662dc4981824bb372c0441d605 not found, continuing without symbols No kallsyms or vmlinux with build-id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f was found [iwldvm] with build id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f not found, continuing without symbols No kallsyms or vmlinux with build-id 2d86086bf136bf374a2f029cf85a48194f9b950b was found [cfg80211] with build id 2d86086bf136bf374a2f029cf85a48194f9b950b not found, continuing without symbols No kallsyms or vmlinux with build-id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 was found [iwlwifi] with build id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 not found, continuing without symbols ... # # Overhead Command Shared Object Symbol # ........ ............... ....................... ........................................................ # 0.03% swapper [ext4] [k] 0x000000000000fe2e 0.03% swapper [kernel.kallsyms] [k] account_entity_enqueue 0.03% swapper [ext4] [k] 0x000000000000fc2b 0.03% irq/50-iwlwifi [iwlwifi] [k] 0x000000000000200b 0.03% swapper [kernel.kallsyms] [k] ktime_add_safe 0.03% swapper [kernel.kallsyms] [k] elv_completed_request 0.03% swapper [libata] [k] 0x0000000000003997 0.03% swapper [libahci] [k] 0x0000000000001f25 0.03% swapper [kernel.kallsyms] [k] rb_next 0.03% swapper [kernel.kallsyms] [k] blk_finish_request 0.03% swapper [ext4] [k] 0x0000000000010248 0.00% perf [kernel.kallsyms] [k] native_write_msr_safe After: $ perf report --stdio Failed to open /tmp/perf-3477.map, continuing without symbols no symbols found in /usr/bin/tr, maybe install a debug package? ... # # Overhead Command Shared Object Symbol # ........ ............... ........................... ...................................................... # 0.04% kworker/u16:3 [ext4] [k] ext4_read_block_bitmap 0.03% kworker/u16:0 [mac80211] [k] ieee80211_sta_reset_beacon_monitor 0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_get_bssid 0.02% firefox [e1000e] [k] __ew32_prepare 0.02% swapper [libahci] [k] ahci_handle_port_interrupt 0.02% emacs libglib-2.0.so.0.4000.0 [.] g_mutex_unlock 0.02% swapper [e1000e] [k] e1000_clean_tx_irq 0.02% dwm [kernel.kallsyms] [k] __schedule 0.02% gnome-terminal- [vdso] [.] __vdso_clock_gettime 0.02% swapper [e1000e] [k] e1000_alloc_rx_buffers 0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_rx 0.01% firefox [vdso] [.] __vdso_gettimeofday 0.01% irq/50-iwlwifi [iwlwifi] [k] iwl_pcie_rxq_restock.part.13 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/87h9yexshi.fsf@sejong.aot.lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-31 16:51:38 +09:00
tools build: Add test for presence of numa_num_possible_cpus() in libnuma The existing numa test checks only if numa.h and numa_available() are present, but that can be satisfied with an old libnuma that is not enough for the 'perf bench numa' entry, so add a test to check for that: [acme@rhel5 linux]$ make NO_AUXTRACE=1 NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin make: Entering directory `/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j2' parallel build Auto-detecting system features: ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ on ] <SNIP> config/Makefile:577: Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8 INSTALL binaries <SNIP> This fixes the build on old systems such as RHEL/CentOS 5.11. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Victor Kamensky <victor.kamensky@linaro.org> Cc: Vinson Lee <vlee@twopensource.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-zqriqkezppi2de2iyjin1tnc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-17 12:20:28 -03:00
perf build: Check what binutils's 'disassembler()' signature to use Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature, so we must use the feature test introduced in fb982666e380 ("tools/bpftool: fix bpftool build with bintutils >= 2.9") to deal with that. Committer testing: After adding the missing function call to test-all.c, and: FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes And the fallbacks for cases where we need -liberty and sometimes -lz to tools/perf/Makefile.config, we get: $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... disassembler-four-args: [ on ] CC /tmp/build/perf/jvmti/libjvmti.o CC /tmp/build/perf/builtin-bench.o <SNIP> $ $ The feature detection test-all.bin gets successfully built and linked: $ ls -la /tmp/build/perf/feature/test-all.bin -rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin $ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler 0000000000061f90 T disassembler $ Time to move on to the patches that make use of this disassembler() routine in binutils's libopcodes. Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <guro@fb.com> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com [ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-11 22:30:48 -07:00
perf tools: Add feature check for libbabeltrace Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches. The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like: $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libbabeltrace: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libunwind NOTE The installation of the [1] to to used by above make: $ git clone git://git.efficios.com/babeltrace.git $ cd babeltrace $ vim README $ ./bootstrap $ ./configure --prefix=/opt/libbabeltrace $ make prefix=/opt/libbabeltrace $ sudo make install prefix=/opt/libbabeltrace Please make sure that the /opt/libbabeltrace/lib directory is in your LD_LIBRARY_PATH: $ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib [1] babeltrace - http://www.efficios.com/babeltrace [2] Common Trace Format - http://www.efficios.com/ctf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ Added missing babeltrace build instructions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 23:16:58 +01:00
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 23:17:00 +01:00
perf tools: Add feature check for libbabeltrace Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches. The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like: $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libbabeltrace: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libunwind NOTE The installation of the [1] to to used by above make: $ git clone git://git.efficios.com/babeltrace.git $ cd babeltrace $ vim README $ ./bootstrap $ ./configure --prefix=/opt/libbabeltrace $ make prefix=/opt/libbabeltrace $ sudo make install prefix=/opt/libbabeltrace Please make sure that the /opt/libbabeltrace/lib directory is in your LD_LIBRARY_PATH: $ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib [1] babeltrace - http://www.efficios.com/babeltrace [2] Common Trace Format - http://www.efficios.com/ctf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ Added missing babeltrace build instructions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 23:16:58 +01:00
perf tools: Fix use of alternatives to find JDIR When a build is run from something like a cron job, the user's $PATH is rather minimal, of note, not including /usr/sbin in my own case. Because of that, an automated rpm package build ultimately fails to find libperf-jvmti.so, because somewhere within the build, this happens... /bin/sh: alternatives: command not found /bin/sh: alternatives: command not found Makefile.config:849: No openjdk development package found, please install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel ...and while the build continues, libperf-jvmti.so isn't built, and things fall down when rpm tries to find all the %files specified. Exact same system builds everything just fine when the job is launched from a login shell instead of a cron job, since alternatives is in $PATH, so openjdk is actually found. The test required to get into this section of code actually specifies the full path, as does a block just above it, so let's do that here too. Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: William Cohen <wcohen@redhat.com> Fixes: d4dfdf00d43e ("perf jvmti: Plug compilation into perf build") Link: http://lkml.kernel.org/r/20180906221812.11167-1-jarod@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-09-06 18:18:12 -04:00
perf build: Check LLVM version in feature check Cancel builtin llvm and clang support when LLVM version is less than 3.9.0: following commits uses newer API. Since Clang/LLVM's API is not guaranteed to be stable, add a test-llvm-version.cpp feature checker, issue warning if LLVM found in compiling environment is not tested yet. Committer Notes: Testing it: Environment: $ cat /etc/fedora-release Fedora release 25 (Twenty Five) $ rpm -q llvm-devel clang-devel llvm-devel-3.8.0-1.fc25.x86_64 clang-devel-3.8.0-2.fc25.x86_64 $ Before: $ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/include/uapi/linux/bpf.h differs from kernel Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel INSTALL GTK UI LINK /tmp/build/perf/perf /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)' /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)' /home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)' <SNIP> After: Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0) Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot to git pull, duh) combo, all works as expected, it is properly detected and built into the resulting perf binary. Signed-off-by: Wang Nan <wangnan0@huawei.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com [ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06 07:22:30 +00:00
perf build: Check LLVM version in feature check Cancel builtin llvm and clang support when LLVM version is less than 3.9.0: following commits uses newer API. Since Clang/LLVM's API is not guaranteed to be stable, add a test-llvm-version.cpp feature checker, issue warning if LLVM found in compiling environment is not tested yet. Committer Notes: Testing it: Environment: $ cat /etc/fedora-release Fedora release 25 (Twenty Five) $ rpm -q llvm-devel clang-devel llvm-devel-3.8.0-1.fc25.x86_64 clang-devel-3.8.0-2.fc25.x86_64 $ Before: $ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/include/uapi/linux/bpf.h differs from kernel Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel INSTALL GTK UI LINK /tmp/build/perf/perf /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)' /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)' /home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)' <SNIP> After: Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0) Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot to git pull, duh) combo, all works as expected, it is properly detected and built into the resulting perf binary. Signed-off-by: Wang Nan <wangnan0@huawei.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com [ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06 07:22:30 +00:00
perf build: Check LLVM version in feature check Cancel builtin llvm and clang support when LLVM version is less than 3.9.0: following commits uses newer API. Since Clang/LLVM's API is not guaranteed to be stable, add a test-llvm-version.cpp feature checker, issue warning if LLVM found in compiling environment is not tested yet. Committer Notes: Testing it: Environment: $ cat /etc/fedora-release Fedora release 25 (Twenty Five) $ rpm -q llvm-devel clang-devel llvm-devel-3.8.0-1.fc25.x86_64 clang-devel-3.8.0-2.fc25.x86_64 $ Before: $ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/include/uapi/linux/bpf.h differs from kernel Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel INSTALL GTK UI LINK /tmp/build/perf/perf /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)' /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)' /home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)' <SNIP> After: Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0) Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot to git pull, duh) combo, all works as expected, it is properly detected and built into the resulting perf binary. Signed-off-by: Wang Nan <wangnan0@huawei.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com [ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06 07:22:30 +00:00
perf build: Check LLVM version in feature check Cancel builtin llvm and clang support when LLVM version is less than 3.9.0: following commits uses newer API. Since Clang/LLVM's API is not guaranteed to be stable, add a test-llvm-version.cpp feature checker, issue warning if LLVM found in compiling environment is not tested yet. Committer Notes: Testing it: Environment: $ cat /etc/fedora-release Fedora release 25 (Twenty Five) $ rpm -q llvm-devel clang-devel llvm-devel-3.8.0-1.fc25.x86_64 clang-devel-3.8.0-2.fc25.x86_64 $ Before: $ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/include/uapi/linux/bpf.h differs from kernel Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel INSTALL GTK UI LINK /tmp/build/perf/perf /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)' /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)' /home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)' <SNIP> After: Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0) Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot to git pull, duh) combo, all works as expected, it is properly detected and built into the resulting perf binary. Signed-off-by: Wang Nan <wangnan0@huawei.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com [ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06 07:22:30 +00:00
perf bpf: Add 'examples' directories The first one is the bare minimum that bpf infrastructure accepts before it expects actual events to be set up: $ cat tools/perf/examples/bpf/empty.c char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE; $ If you remove that "version" line, then it will be refused with: # perf trace -e tools/perf/examples/bpf/empty.c event syntax error: 'tools/perf/examples/bpf/empty.c' \___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # The next ones will, step by step, show simple filters, then the needs for headers will be made clear, it will be put in place and tested with new examples, rinse, repeat. Back to using this first one to test the perf+bpf infrastructure: If we run it will fail, as no functions are present connecting with, say, a tracepoint or a function using the kprobes or uprobes infrastructure: # perf trace -e tools/perf/examples/bpf/empty.c WARNING: event parser found nothing invalid or unsupported event: 'tools/perf/examples/bpf/empty.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # But, if we set things up to dump the generated object file to a file, and do this after having run 'make install', still on the developer's $HOME directory: # cat ~/.perfconfig [llvm] dump-obj = true # # perf trace -e ~acme/lib/examples/perf/bpf/empty.c LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o WARNING: event parser found nothing invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c' <SNIP> # We can look at the dumped object file: # ls -la ~acme/lib/examples/perf/bpf/empty.o -rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o # file ~acme/lib/examples/perf/bpf/empty.o /home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped # readelf -sw ~acme/lib/examples/perf/bpf/empty.o Symbol table '.symtab' contains 3 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version # # tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o null # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-04 11:56:15 -03:00
perf build: Fix installation directory for eBPF The perf tool build and install is controlled via a Makefile. The 'install' rule creates directories and copies files. Among them are header files installed in /usr/lib/include/perf/bpf/. However all listed examples are installing its header files in /usr/lib/<tool-name>/...[/include]/header.h and not in /usr/lib/include/<tool-name>/.../header.h. Background information: Building the Fedora 28 glibc RPM on s390x and s390 fails on s390 (gcc -m31) as gcc is not able to find header-files like stdbool.h. In the glibc.spec file, you can see that glibc is configured with "--with-headers". In this case, first -nostdinc is added to the CFLAGS and then further include paths are added via -isystem. One of those paths should contain header files like stdbool.h. In order to get this path, gcc is invoked with: - on Fedora 28 (with 4.18 kernel): $ gcc -print-file-name=include /usr/lib/gcc/s390x-redhat-linux/8/include $ gcc -m31 -print-file-name=include /usr/lib/gcc/s390x-redhat-linux/8/../../../../lib/include => If perf is installed, this is: /usr/lib/include On my machine this directory is only containing the directory "perf". If perf is not installed gcc returns: /usr/lib/gcc/s390x-redhat-linux/8/include - on Ubuntu 18.04 (with 4.15 kernel): $ gcc -print-file-name=include /usr/lib/gcc/s390x-linux-gnu/7/include $ gcc -m31 -print-file-name=include /usr/lib/gcc/s390x-linux-gnu/7/include => gcc returns the correct path even if perf is installed. In each case, the introduction of the subdirectory /usr/lib/include leads to the regression that one can not build the glibc RPM for s390 anymore as gcc can not find headers like stdbool.h. To remedy this install bpf.h to /usr/lib/perf/include/bpf/bpf.h Output before using the command 'perf test -Fv 40': echo '...[bpf-program-source]...' | /usr/bin/clang ... \ -I/root/lib/include/perf/bpf ... ^^^^^^^^^^^^ ... [root@p23lp27 perf]# perf test -F 40 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok [root@p23lp27 perf]# Output after using command 'perf test -Fv 40': echo '...[bpf-program-source]...' | /usr/bin/clang ... \ -I/root/lib/perf/include/bpf ... ^^^^^^^^^^^^ ... [root@p23lp27 perf]# perf test -F 40 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok [root@p23lp27 perf]# Committer testing: While the above 'perf test -F 40' (or 'perf test bpf') will allow us to see that the correct path is now added via -I, to actually test this we better try to use a bpf script that includes files in the changed directory. We have the files that now reside in /root/lib/perf/examples/bpf/ to do just that: # tail -8 /root/lib/perf/examples/bpf/5sec.c #include <bpf.h> int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec) { return sec == 5; } license(GPL); # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 4 0.333 (4000.086 ms): sleep/9248 nanosleep(rqtp: 0x7ffc155f3300) = 0 # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5 0.287 ( ): sleep/9659 nanosleep(rqtp: 0x7ffeafe38200) ... 0.290 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5 0.287 (5000.059 ms): sleep/9659 ... [continued]: nanosleep()) = 0 # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 6 0.247 (5999.951 ms): sleep/10068 nanosleep(rqtp: 0x7fff2086d900) = 0 # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5.987 0.293 ( ): sleep/10489 nanosleep(rqtp: 0x7ffdd4fc10e0) ... 0.296 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5 0.293 (5986.912 ms): sleep/10489 ... [continued]: nanosleep()) = 0 # Suggested-by: Stefan Liebler <stli@linux.ibm.com> Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Fixes: 1b16fffa389d ("perf llvm-utils: Add bpf include path to clang command line") Link: http://lkml.kernel.org/r/20180731073254.91090-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-07-31 09:32:54 +02:00
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 12:02:09 -03:00
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 12:02:09 -03:00
perf bpf: Add 'examples' directories The first one is the bare minimum that bpf infrastructure accepts before it expects actual events to be set up: $ cat tools/perf/examples/bpf/empty.c char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE; $ If you remove that "version" line, then it will be refused with: # perf trace -e tools/perf/examples/bpf/empty.c event syntax error: 'tools/perf/examples/bpf/empty.c' \___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # The next ones will, step by step, show simple filters, then the needs for headers will be made clear, it will be put in place and tested with new examples, rinse, repeat. Back to using this first one to test the perf+bpf infrastructure: If we run it will fail, as no functions are present connecting with, say, a tracepoint or a function using the kprobes or uprobes infrastructure: # perf trace -e tools/perf/examples/bpf/empty.c WARNING: event parser found nothing invalid or unsupported event: 'tools/perf/examples/bpf/empty.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # But, if we set things up to dump the generated object file to a file, and do this after having run 'make install', still on the developer's $HOME directory: # cat ~/.perfconfig [llvm] dump-obj = true # # perf trace -e ~acme/lib/examples/perf/bpf/empty.c LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o WARNING: event parser found nothing invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c' <SNIP> # We can look at the dumped object file: # ls -la ~acme/lib/examples/perf/bpf/empty.o -rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o # file ~acme/lib/examples/perf/bpf/empty.o /home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped # readelf -sw ~acme/lib/examples/perf/bpf/empty.o Symbol table '.symtab' contains 3 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version # # tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o null # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-04 11:56:15 -03:00
perf bpf: Add 'examples' directories The first one is the bare minimum that bpf infrastructure accepts before it expects actual events to be set up: $ cat tools/perf/examples/bpf/empty.c char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE; $ If you remove that "version" line, then it will be refused with: # perf trace -e tools/perf/examples/bpf/empty.c event syntax error: 'tools/perf/examples/bpf/empty.c' \___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # The next ones will, step by step, show simple filters, then the needs for headers will be made clear, it will be put in place and tested with new examples, rinse, repeat. Back to using this first one to test the perf+bpf infrastructure: If we run it will fail, as no functions are present connecting with, say, a tracepoint or a function using the kprobes or uprobes infrastructure: # perf trace -e tools/perf/examples/bpf/empty.c WARNING: event parser found nothing invalid or unsupported event: 'tools/perf/examples/bpf/empty.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # But, if we set things up to dump the generated object file to a file, and do this after having run 'make install', still on the developer's $HOME directory: # cat ~/.perfconfig [llvm] dump-obj = true # # perf trace -e ~acme/lib/examples/perf/bpf/empty.c LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o WARNING: event parser found nothing invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c' <SNIP> # We can look at the dumped object file: # ls -la ~acme/lib/examples/perf/bpf/empty.o -rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o # file ~acme/lib/examples/perf/bpf/empty.o /home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped # readelf -sw ~acme/lib/examples/perf/bpf/empty.o Symbol table '.symtab' contains 3 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version # # tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o null # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-04 11:56:15 -03:00
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 12:02:09 -03:00
perf bpf: Add 'examples' directories The first one is the bare minimum that bpf infrastructure accepts before it expects actual events to be set up: $ cat tools/perf/examples/bpf/empty.c char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE; $ If you remove that "version" line, then it will be refused with: # perf trace -e tools/perf/examples/bpf/empty.c event syntax error: 'tools/perf/examples/bpf/empty.c' \___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # The next ones will, step by step, show simple filters, then the needs for headers will be made clear, it will be put in place and tested with new examples, rinse, repeat. Back to using this first one to test the perf+bpf infrastructure: If we run it will fail, as no functions are present connecting with, say, a tracepoint or a function using the kprobes or uprobes infrastructure: # perf trace -e tools/perf/examples/bpf/empty.c WARNING: event parser found nothing invalid or unsupported event: 'tools/perf/examples/bpf/empty.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # But, if we set things up to dump the generated object file to a file, and do this after having run 'make install', still on the developer's $HOME directory: # cat ~/.perfconfig [llvm] dump-obj = true # # perf trace -e ~acme/lib/examples/perf/bpf/empty.c LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o WARNING: event parser found nothing invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c' <SNIP> # We can look at the dumped object file: # ls -la ~acme/lib/examples/perf/bpf/empty.o -rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o # file ~acme/lib/examples/perf/bpf/empty.o /home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped # readelf -sw ~acme/lib/examples/perf/bpf/empty.o Symbol table '.symtab' contains 3 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version # # tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o null # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-04 11:56:15 -03:00
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 12:02:09 -03:00
perf bpf: Add 'examples' directories The first one is the bare minimum that bpf infrastructure accepts before it expects actual events to be set up: $ cat tools/perf/examples/bpf/empty.c char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE; $ If you remove that "version" line, then it will be refused with: # perf trace -e tools/perf/examples/bpf/empty.c event syntax error: 'tools/perf/examples/bpf/empty.c' \___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # The next ones will, step by step, show simple filters, then the needs for headers will be made clear, it will be put in place and tested with new examples, rinse, repeat. Back to using this first one to test the perf+bpf infrastructure: If we run it will fail, as no functions are present connecting with, say, a tracepoint or a function using the kprobes or uprobes infrastructure: # perf trace -e tools/perf/examples/bpf/empty.c WARNING: event parser found nothing invalid or unsupported event: 'tools/perf/examples/bpf/empty.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # But, if we set things up to dump the generated object file to a file, and do this after having run 'make install', still on the developer's $HOME directory: # cat ~/.perfconfig [llvm] dump-obj = true # # perf trace -e ~acme/lib/examples/perf/bpf/empty.c LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o WARNING: event parser found nothing invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c' <SNIP> # We can look at the dumped object file: # ls -la ~acme/lib/examples/perf/bpf/empty.o -rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o # file ~acme/lib/examples/perf/bpf/empty.o /home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped # readelf -sw ~acme/lib/examples/perf/bpf/empty.o Symbol table '.symtab' contains 3 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version # # tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o null # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-04 11:56:15 -03:00
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 12:02:09 -03:00
perf tools: Add build and install plugins targets Adding 'plugins' target along with the libtraceevent.a, so plugins are built together with traceevent library. Adding 'install-traceevent-plugins' Makefile install target, instructing perf to install plugins into: $(HOME)/.traceevent/plugins - If installed localy under $HOME $(DESTDIR)/$(prefix)/$(libdir)/traceevent/plugins - If installed globally Examples: $ make install ... $ find ~/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/plugin_mac80211.so /home/jolsa/.traceevent/plugins/plugin_kvm.so /home/jolsa/.traceevent/plugins/plugin_scsi.so /home/jolsa/.traceevent/plugins/plugin_sched_switch.so /home/jolsa/.traceevent/plugins/plugin_xen.so /home/jolsa/.traceevent/plugins/plugin_cfg80211.so /home/jolsa/.traceevent/plugins/plugin_function.so /home/jolsa/.traceevent/plugins/plugin_kmem.so /home/jolsa/.traceevent/plugins/plugin_hrtimer.so /home/jolsa/.traceevent/plugins/plugin_jbd2.so $ sudo make install DESTDIR=/opt/perf/ ... $ find /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/plugin_kvm.so /opt/perf/lib64/traceevent/plugins/plugin_scsi.so /opt/perf/lib64/traceevent/plugins/plugin_mac80211.so /opt/perf/lib64/traceevent/plugins/plugin_hrtimer.so /opt/perf/lib64/traceevent/plugins/plugin_kmem.so /opt/perf/lib64/traceevent/plugins/plugin_jbd2.so /opt/perf/lib64/traceevent/plugins/plugin_sched_switch.so /opt/perf/lib64/traceevent/plugins/plugin_function.so /opt/perf/lib64/traceevent/plugins/plugin_cfg80211.so /opt/perf/lib64/traceevent/plugins/plugin_xen.so Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1386076182-14484-8-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-03 14:09:21 +01:00
perf tools: Add build and install plugins targets Adding 'plugins' target along with the libtraceevent.a, so plugins are built together with traceevent library. Adding 'install-traceevent-plugins' Makefile install target, instructing perf to install plugins into: $(HOME)/.traceevent/plugins - If installed localy under $HOME $(DESTDIR)/$(prefix)/$(libdir)/traceevent/plugins - If installed globally Examples: $ make install ... $ find ~/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/plugin_mac80211.so /home/jolsa/.traceevent/plugins/plugin_kvm.so /home/jolsa/.traceevent/plugins/plugin_scsi.so /home/jolsa/.traceevent/plugins/plugin_sched_switch.so /home/jolsa/.traceevent/plugins/plugin_xen.so /home/jolsa/.traceevent/plugins/plugin_cfg80211.so /home/jolsa/.traceevent/plugins/plugin_function.so /home/jolsa/.traceevent/plugins/plugin_kmem.so /home/jolsa/.traceevent/plugins/plugin_hrtimer.so /home/jolsa/.traceevent/plugins/plugin_jbd2.so $ sudo make install DESTDIR=/opt/perf/ ... $ find /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/plugin_kvm.so /opt/perf/lib64/traceevent/plugins/plugin_scsi.so /opt/perf/lib64/traceevent/plugins/plugin_mac80211.so /opt/perf/lib64/traceevent/plugins/plugin_hrtimer.so /opt/perf/lib64/traceevent/plugins/plugin_kmem.so /opt/perf/lib64/traceevent/plugins/plugin_jbd2.so /opt/perf/lib64/traceevent/plugins/plugin_sched_switch.so /opt/perf/lib64/traceevent/plugins/plugin_function.so /opt/perf/lib64/traceevent/plugins/plugin_cfg80211.so /opt/perf/lib64/traceevent/plugins/plugin_xen.so Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1386076182-14484-8-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-03 14:09:21 +01:00
perf tools: Factor features display code Currently the we display all detected features/libraries by following rules: - if one of the features is missing - if it's build from clean tree This patch changes changes this behavior in several ways. - We no longer display all detected features, only detected libraries are displayed by default: $ make BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] The assumption is, that above libraries are the most interesting part of the detection, while we don't care much about detection of on-exit support. - If all above libraries are detected, the default is not shown on subsequent builds. - If one of the above libraries is missing, the detection output is forced. - The features status is stored in PERF-FEATURES file and the detection output is forced in case the there's difference between the file contents and currently detected features. - If you want to see all detected features, you can use VF=1 make variable, that forces the detected features output. $ make VF=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... backtrace: [ on ] ... fortify-source: [ on ] ... gtk2-infobar: [ on ] ... libelf-getphdrnum: [ on ] ... libelf-mmap: [ on ] ... libpython-version: [ on ] ... on-exit: [ on ] ... stackprotector-all: [ on ] ... timerfd: [ on ] ... libunwind-debug-frame: [ OFF ] ... bionic: [ OFF ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:54 +01:00
perf tools: Factor features display code Currently the we display all detected features/libraries by following rules: - if one of the features is missing - if it's build from clean tree This patch changes changes this behavior in several ways. - We no longer display all detected features, only detected libraries are displayed by default: $ make BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] The assumption is, that above libraries are the most interesting part of the detection, while we don't care much about detection of on-exit support. - If all above libraries are detected, the default is not shown on subsequent builds. - If one of the above libraries is missing, the detection output is forced. - The features status is stored in PERF-FEATURES file and the detection output is forced in case the there's difference between the file contents and currently detected features. - If you want to see all detected features, you can use VF=1 make variable, that forces the detected features output. $ make VF=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... backtrace: [ on ] ... fortify-source: [ on ] ... gtk2-infobar: [ on ] ... libelf-getphdrnum: [ on ] ... libelf-mmap: [ on ] ... libpython-version: [ on ] ... on-exit: [ on ] ... stackprotector-all: [ on ] ... timerfd: [ on ] ... libunwind-debug-frame: [ OFF ] ... bionic: [ OFF ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:54 +01:00
perf tools: Factor features display code Currently the we display all detected features/libraries by following rules: - if one of the features is missing - if it's build from clean tree This patch changes changes this behavior in several ways. - We no longer display all detected features, only detected libraries are displayed by default: $ make BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] The assumption is, that above libraries are the most interesting part of the detection, while we don't care much about detection of on-exit support. - If all above libraries are detected, the default is not shown on subsequent builds. - If one of the above libraries is missing, the detection output is forced. - The features status is stored in PERF-FEATURES file and the detection output is forced in case the there's difference between the file contents and currently detected features. - If you want to see all detected features, you can use VF=1 make variable, that forces the detected features output. $ make VF=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... backtrace: [ on ] ... fortify-source: [ on ] ... gtk2-infobar: [ on ] ... libelf-getphdrnum: [ on ] ... libelf-mmap: [ on ] ... libpython-version: [ on ] ... on-exit: [ on ] ... stackprotector-all: [ on ] ... timerfd: [ on ] ... libunwind-debug-frame: [ OFF ] ... bionic: [ OFF ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 16:52:54 +01:00
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 12:02:09 -03:00
perf bpf: Add 'examples' directories The first one is the bare minimum that bpf infrastructure accepts before it expects actual events to be set up: $ cat tools/perf/examples/bpf/empty.c char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE; $ If you remove that "version" line, then it will be refused with: # perf trace -e tools/perf/examples/bpf/empty.c event syntax error: 'tools/perf/examples/bpf/empty.c' \___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # The next ones will, step by step, show simple filters, then the needs for headers will be made clear, it will be put in place and tested with new examples, rinse, repeat. Back to using this first one to test the perf+bpf infrastructure: If we run it will fail, as no functions are present connecting with, say, a tracepoint or a function using the kprobes or uprobes infrastructure: # perf trace -e tools/perf/examples/bpf/empty.c WARNING: event parser found nothing invalid or unsupported event: 'tools/perf/examples/bpf/empty.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # But, if we set things up to dump the generated object file to a file, and do this after having run 'make install', still on the developer's $HOME directory: # cat ~/.perfconfig [llvm] dump-obj = true # # perf trace -e ~acme/lib/examples/perf/bpf/empty.c LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o WARNING: event parser found nothing invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c' <SNIP> # We can look at the dumped object file: # ls -la ~acme/lib/examples/perf/bpf/empty.o -rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o # file ~acme/lib/examples/perf/bpf/empty.o /home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped # readelf -sw ~acme/lib/examples/perf/bpf/empty.o Symbol table '.symtab' contains 3 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version # # tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o null # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-04 11:56:15 -03:00