linux/sound/core/control.c

1965 lines
51 KiB

ALSA: control: use counting semaphore as write lock for ELEM_WRITE operation In ALSA control interface, applications can execute two types of request for value of members on each element; ELEM_READ and ELEM_WRITE. In ALSA control core, these two requests are handled within read lock of a counting semaphore, therefore several processes can run to execute these two requests at the same time. This has an issue because ELEM_WRITE requests have an effect to change state of the target element. Concurrent access should be controlled for each of ELEM_READ/ELEM_WRITE case. This commit uses the counting semaphore as write lock for ELEM_WRITE requests, while use it as read lock for ELEM_READ requests. The state of a target element is maintained exclusively between ELEM_WRITE/ELEM_READ operations. There's a concern. If the counting semaphore is acquired for read lock in implementations of 'struct snd_kcontrol.put()' in each driver, this commit shall cause dead lock. As of v4.13-rc5, 'snd-mixer-oss.ko', 'snd-emu10k1.ko' and 'snd-soc-sst-atom-hifi2-platform.ko' includes codes for read locks, but these are not in a call graph from 'struct snd_kcontrol.put(). Therefore, this commit is safe. In current implementation, the same solution is applied for the other operations to element; e.g. ELEM_LOCK and ELEM_UNLOCK. There's another discussion about an overhead to maintain concurrent access to an element during operating the other elements on the same card instance, because the lock primitive is originally implemented to maintain a list of elements on the card instance. There's a substantial difference between per-element-list lock and per-element lock. Here, let me investigate another idea to add per-element lock to maintain the concurrent accesses with inquiry/change requests to an element. It's not so frequent for applications to operate members on elements, while adding a new lock primitive to structure increases memory footprint for all of element sets somehow. Experimentally, inquiry operation is more frequent than change operation and usage of counting semaphore for the inquiry operation brings no blocking to the other inquiry operations. Thus the overhead is not so critical for usual applications. For the above reasons, in this commit, the per-element lock is not introduced. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-20 13:49:08 +09:00
ALSA: control: use counting semaphore as write lock for ELEM_WRITE operation In ALSA control interface, applications can execute two types of request for value of members on each element; ELEM_READ and ELEM_WRITE. In ALSA control core, these two requests are handled within read lock of a counting semaphore, therefore several processes can run to execute these two requests at the same time. This has an issue because ELEM_WRITE requests have an effect to change state of the target element. Concurrent access should be controlled for each of ELEM_READ/ELEM_WRITE case. This commit uses the counting semaphore as write lock for ELEM_WRITE requests, while use it as read lock for ELEM_READ requests. The state of a target element is maintained exclusively between ELEM_WRITE/ELEM_READ operations. There's a concern. If the counting semaphore is acquired for read lock in implementations of 'struct snd_kcontrol.put()' in each driver, this commit shall cause dead lock. As of v4.13-rc5, 'snd-mixer-oss.ko', 'snd-emu10k1.ko' and 'snd-soc-sst-atom-hifi2-platform.ko' includes codes for read locks, but these are not in a call graph from 'struct snd_kcontrol.put(). Therefore, this commit is safe. In current implementation, the same solution is applied for the other operations to element; e.g. ELEM_LOCK and ELEM_UNLOCK. There's another discussion about an overhead to maintain concurrent access to an element during operating the other elements on the same card instance, because the lock primitive is originally implemented to maintain a list of elements on the card instance. There's a substantial difference between per-element-list lock and per-element lock. Here, let me investigate another idea to add per-element lock to maintain the concurrent accesses with inquiry/change requests to an element. It's not so frequent for applications to operate members on elements, while adding a new lock primitive to structure increases memory footprint for all of element sets somehow. Experimentally, inquiry operation is more frequent than change operation and usage of counting semaphore for the inquiry operation brings no blocking to the other inquiry operations. Thus the overhead is not so critical for usual applications. For the above reasons, in this commit, the per-element lock is not introduced. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-20 13:49:08 +09:00
ALSA: control: delegate TLV eventing to each driver In a design of ALSA control core, a set of elements is represented by 'struct snd_kcontrol' to share common attributes. The set of elements shares TLV (Type-Length-Value) data, too. On the other hand, in ALSA control interface/protocol for applications, a TLV operation is committed to an element. Totally, the operation can have sub-effect to the other elements in the set. For example, TLV_WRITE operation is expected to change TLV data, which returns to applications. Applications attempt to change the TLV data per element, but in the above design, they can effect to elements in the same set. As a default, ALSA control core has no implementation except for TLV_READ operation. Thus, the above design looks to have no issue. However, in kernel APIs of ALSA control component, developers can program a handler for any request of the TLV operation. Therefore, for elements in a set which has the handler, applications can commit TLV_WRITE and TLV_COMMAND requests. For the above scenario, ALSA control core assist notification. When the handler returns positive value, the core queueing an event for a requested element. However, this includes design defects that the event is not queued for the other element in a set. Actually, developers can program the handlers to keep per-element TLV data, but it depends on each driver. As of v4.13-rc6, there's no driver in tree to utilize the notification, except for user-defined element set. This commit delegates the notification into each driver to prevent developers from the design defects. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-24 10:46:14 +09:00
ALSA: control: Fix replacing user controls There are two issues with the current implementation for replacing user controls. The first is that the code does not check if the control is actually a user control and neither does it check if the control is owned by the process that tries to remove it. That allows userspace applications to remove arbitrary controls, which can cause a user after free if a for example a driver does not expect a control to be removed from under its feed. The second issue is that on one hand when a control is replaced the user_ctl_count limit is not checked and on the other hand the user_ctl_count is increased (even though the number of user controls does not change). This allows userspace, once the user_ctl_count limit as been reached, to repeatedly replace a control until user_ctl_count overflows. Once that happens new controls can be added effectively bypassing the user_ctl_count limit. Both issues can be fixed by instead of open-coding the removal of the control that is to be replaced to use snd_ctl_remove_user_ctl(). This function does proper permission checks as well as decrements user_ctl_count after the control has been removed. Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at beginning of the function if the control already exists is removed. This is not a problem though since the check is quite useless, because the lock that is protecting the control list is released between the check and before adding the new control to the list, which means that it is possible that a different control with the same settings is added to the list after the check. Luckily there is another check that is done while holding the lock in snd_ctl_add(), so we'll rely on that to make sure that the same control is not added twice. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 13:32:32 +02:00
ALSA: control: Fix replacing user controls There are two issues with the current implementation for replacing user controls. The first is that the code does not check if the control is actually a user control and neither does it check if the control is owned by the process that tries to remove it. That allows userspace applications to remove arbitrary controls, which can cause a user after free if a for example a driver does not expect a control to be removed from under its feed. The second issue is that on one hand when a control is replaced the user_ctl_count limit is not checked and on the other hand the user_ctl_count is increased (even though the number of user controls does not change). This allows userspace, once the user_ctl_count limit as been reached, to repeatedly replace a control until user_ctl_count overflows. Once that happens new controls can be added effectively bypassing the user_ctl_count limit. Both issues can be fixed by instead of open-coding the removal of the control that is to be replaced to use snd_ctl_remove_user_ctl(). This function does proper permission checks as well as decrements user_ctl_count after the control has been removed. Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at beginning of the function if the control already exists is removed. This is not a problem though since the check is quite useless, because the lock that is protecting the control list is released between the check and before adding the new control to the list, which means that it is possible that a different control with the same settings is added to the list after the check. Luckily there is another check that is done while holding the lock in snd_ctl_add(), so we'll rely on that to make sure that the same control is not added twice. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 13:32:32 +02:00
ALSA: control: Fix replacing user controls There are two issues with the current implementation for replacing user controls. The first is that the code does not check if the control is actually a user control and neither does it check if the control is owned by the process that tries to remove it. That allows userspace applications to remove arbitrary controls, which can cause a user after free if a for example a driver does not expect a control to be removed from under its feed. The second issue is that on one hand when a control is replaced the user_ctl_count limit is not checked and on the other hand the user_ctl_count is increased (even though the number of user controls does not change). This allows userspace, once the user_ctl_count limit as been reached, to repeatedly replace a control until user_ctl_count overflows. Once that happens new controls can be added effectively bypassing the user_ctl_count limit. Both issues can be fixed by instead of open-coding the removal of the control that is to be replaced to use snd_ctl_remove_user_ctl(). This function does proper permission checks as well as decrements user_ctl_count after the control has been removed. Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at beginning of the function if the control already exists is removed. This is not a problem though since the check is quite useless, because the lock that is protecting the control list is released between the check and before adding the new control to the list, which means that it is possible that a different control with the same settings is added to the list after the check. Luckily there is another check that is done while holding the lock in snd_ctl_add(), so we'll rely on that to make sure that the same control is not added twice. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 13:32:32 +02:00
ALSA: control: Fix replacing user controls There are two issues with the current implementation for replacing user controls. The first is that the code does not check if the control is actually a user control and neither does it check if the control is owned by the process that tries to remove it. That allows userspace applications to remove arbitrary controls, which can cause a user after free if a for example a driver does not expect a control to be removed from under its feed. The second issue is that on one hand when a control is replaced the user_ctl_count limit is not checked and on the other hand the user_ctl_count is increased (even though the number of user controls does not change). This allows userspace, once the user_ctl_count limit as been reached, to repeatedly replace a control until user_ctl_count overflows. Once that happens new controls can be added effectively bypassing the user_ctl_count limit. Both issues can be fixed by instead of open-coding the removal of the control that is to be replaced to use snd_ctl_remove_user_ctl(). This function does proper permission checks as well as decrements user_ctl_count after the control has been removed. Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at beginning of the function if the control already exists is removed. This is not a problem though since the check is quite useless, because the lock that is protecting the control list is released between the check and before adding the new control to the list, which means that it is possible that a different control with the same settings is added to the list after the check. Luckily there is another check that is done while holding the lock in snd_ctl_add(), so we'll rely on that to make sure that the same control is not added twice. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 13:32:32 +02:00
ALSA: control: Fix replacing user controls There are two issues with the current implementation for replacing user controls. The first is that the code does not check if the control is actually a user control and neither does it check if the control is owned by the process that tries to remove it. That allows userspace applications to remove arbitrary controls, which can cause a user after free if a for example a driver does not expect a control to be removed from under its feed. The second issue is that on one hand when a control is replaced the user_ctl_count limit is not checked and on the other hand the user_ctl_count is increased (even though the number of user controls does not change). This allows userspace, once the user_ctl_count limit as been reached, to repeatedly replace a control until user_ctl_count overflows. Once that happens new controls can be added effectively bypassing the user_ctl_count limit. Both issues can be fixed by instead of open-coding the removal of the control that is to be replaced to use snd_ctl_remove_user_ctl(). This function does proper permission checks as well as decrements user_ctl_count after the control has been removed. Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at beginning of the function if the control already exists is removed. This is not a problem though since the check is quite useless, because the lock that is protecting the control list is released between the check and before adding the new control to the list, which means that it is possible that a different control with the same settings is added to the list after the check. Luckily there is another check that is done while holding the lock in snd_ctl_add(), so we'll rely on that to make sure that the same control is not added twice. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 13:32:32 +02:00
ALSA: control: Fix replacing user controls There are two issues with the current implementation for replacing user controls. The first is that the code does not check if the control is actually a user control and neither does it check if the control is owned by the process that tries to remove it. That allows userspace applications to remove arbitrary controls, which can cause a user after free if a for example a driver does not expect a control to be removed from under its feed. The second issue is that on one hand when a control is replaced the user_ctl_count limit is not checked and on the other hand the user_ctl_count is increased (even though the number of user controls does not change). This allows userspace, once the user_ctl_count limit as been reached, to repeatedly replace a control until user_ctl_count overflows. Once that happens new controls can be added effectively bypassing the user_ctl_count limit. Both issues can be fixed by instead of open-coding the removal of the control that is to be replaced to use snd_ctl_remove_user_ctl(). This function does proper permission checks as well as decrements user_ctl_count after the control has been removed. Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at beginning of the function if the control already exists is removed. This is not a problem though since the check is quite useless, because the lock that is protecting the control list is released between the check and before adding the new control to the list, which means that it is possible that a different control with the same settings is added to the list after the check. Luckily there is another check that is done while holding the lock in snd_ctl_add(), so we'll rely on that to make sure that the same control is not added twice. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 13:32:32 +02:00
ALSA: control: delegate TLV eventing to each driver In a design of ALSA control core, a set of elements is represented by 'struct snd_kcontrol' to share common attributes. The set of elements shares TLV (Type-Length-Value) data, too. On the other hand, in ALSA control interface/protocol for applications, a TLV operation is committed to an element. Totally, the operation can have sub-effect to the other elements in the set. For example, TLV_WRITE operation is expected to change TLV data, which returns to applications. Applications attempt to change the TLV data per element, but in the above design, they can effect to elements in the same set. As a default, ALSA control core has no implementation except for TLV_READ operation. Thus, the above design looks to have no issue. However, in kernel APIs of ALSA control component, developers can program a handler for any request of the TLV operation. Therefore, for elements in a set which has the handler, applications can commit TLV_WRITE and TLV_COMMAND requests. For the above scenario, ALSA control core assist notification. When the handler returns positive value, the core queueing an event for a requested element. However, this includes design defects that the event is not queued for the other element in a set. Actually, developers can program the handlers to keep per-element TLV data, but it depends on each driver. As of v4.13-rc6, there's no driver in tree to utilize the notification, except for user-defined element set. This commit delegates the notification into each driver to prevent developers from the design defects. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-24 10:46:14 +09:00