linux/drivers/base/power/runtime.c

1732 lines
47 KiB

PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idle This commit appends a few _rcuidle suffixes to fix the following RCU-used-from-idle bug: > =============================== > [ INFO: suspicious RCU usage. ] > 4.6.0-rc5-next-20160426+ #1116 Not tainted > ------------------------------- > include/trace/events/rpm.h:95 suspicious rcu_dereference_check() usage! > > other info that might help us debug this: > > > RCU used illegally from idle CPU! > rcu_scheduler_active = 1, debug_locks = 0 > RCU used illegally from extended quiescent state! > 1 lock held by swapper/0/0: > #0: (&(&dev->power.lock)->rlock){-.-...}, at: [<c052cc2c>] __rpm_callback+0x58/0x60 > > stack backtrace: > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1116 > Hardware name: Generic OMAP36xx (Flattened Device Tree) > [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14) > [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4) > [<c047fd68>] (dump_stack) from [<c052d5d0>] (rpm_suspend+0x580/0x768) > [<c052d5d0>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84) > [<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5c/0x70) > [<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x244) > [<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec) > [<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4) > [<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0) > [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8) > [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c) In the immortal words of Steven Rostedt, "*Whack* *Whack* *Whack*!!!" Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> WhACKED-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-26 13:03:51 -07:00
PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idle This commit appends a few _rcuidle suffixes to fix the following RCU-used-from-idle bug: > =============================== > [ INFO: suspicious RCU usage. ] > 4.6.0-rc5-next-20160426+ #1116 Not tainted > ------------------------------- > include/trace/events/rpm.h:95 suspicious rcu_dereference_check() usage! > > other info that might help us debug this: > > > RCU used illegally from idle CPU! > rcu_scheduler_active = 1, debug_locks = 0 > RCU used illegally from extended quiescent state! > 1 lock held by swapper/0/0: > #0: (&(&dev->power.lock)->rlock){-.-...}, at: [<c052cc2c>] __rpm_callback+0x58/0x60 > > stack backtrace: > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1116 > Hardware name: Generic OMAP36xx (Flattened Device Tree) > [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14) > [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4) > [<c047fd68>] (dump_stack) from [<c052d5d0>] (rpm_suspend+0x580/0x768) > [<c052d5d0>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84) > [<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5c/0x70) > [<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x244) > [<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec) > [<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4) > [<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0) > [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8) > [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c) In the immortal words of Steven Rostedt, "*Whack* *Whack* *Whack*!!!" Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> WhACKED-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-26 13:03:51 -07:00
PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idle This commit appends a few _rcuidle suffixes to fix the following RCU-used-from-idle bug: > =============================== > [ INFO: suspicious RCU usage. ] > 4.6.0-rc5-next-20160426+ #1116 Not tainted > ------------------------------- > include/trace/events/rpm.h:95 suspicious rcu_dereference_check() usage! > > other info that might help us debug this: > > > RCU used illegally from idle CPU! > rcu_scheduler_active = 1, debug_locks = 0 > RCU used illegally from extended quiescent state! > 1 lock held by swapper/0/0: > #0: (&(&dev->power.lock)->rlock){-.-...}, at: [<c052cc2c>] __rpm_callback+0x58/0x60 > > stack backtrace: > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1116 > Hardware name: Generic OMAP36xx (Flattened Device Tree) > [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14) > [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4) > [<c047fd68>] (dump_stack) from [<c052d5d0>] (rpm_suspend+0x580/0x768) > [<c052d5d0>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84) > [<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5c/0x70) > [<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x244) > [<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec) > [<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4) > [<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0) > [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8) > [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c) In the immortal words of Steven Rostedt, "*Whack* *Whack* *Whack*!!!" Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> WhACKED-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-26 13:03:51 -07:00
PM / runtime: Use _rcuidle for runtime suspend tracepoints Further testing with false negatives suppressed by commit 293e2421fe25 ("rcu: Remove superfluous versions of rcu_read_lock_sched_held()") identified a few more unprotected uses of RCU from the idle loop. Because RCU actively ignores idle-loop code (for energy-efficiency reasons, among other things), using RCU from the idle loop can result in too-short grace periods, in turn resulting in arbitrary misbehavior. The affected function is rpm_suspend(). The resulting lockdep-RCU splat is as follows: ------------------------------------------------------------------------ Warning from omap3 =============================== [ INFO: suspicious RCU usage. ] 4.6.0-rc5-next-20160426+ #1112 Not tainted ------------------------------- include/trace/events/rpm.h:63 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: (&(&dev->power.lock)->rlock){-.-...}, at: [<c052ee24>] __pm_runtime_suspend+0x54/0x84 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1112 Hardware name: Generic OMAP36xx (Flattened Device Tree) [<c0110308>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14) [<c010c3a8>] (show_stack) from [<c047fec8>] (dump_stack+0xb0/0xe4) [<c047fec8>] (dump_stack) from [<c052d7b4>] (rpm_suspend+0x604/0x7e4) [<c052d7b4>] (rpm_suspend) from [<c052ee34>] (__pm_runtime_suspend+0x64/0x84) [<c052ee34>] (__pm_runtime_suspend) from [<c04bf3bc>] (omap2_gpio_prepare_for_idle+0x5c/0x70) [<c04bf3bc>] (omap2_gpio_prepare_for_idle) from [<c01255e8>] (omap_sram_idle+0x140/0x244) [<c01255e8>] (omap_sram_idle) from [<c0126b48>] (omap3_enter_idle_bm+0xfc/0x1ec) [<c0126b48>] (omap3_enter_idle_bm) from [<c0601db8>] (cpuidle_enter_state+0x80/0x3d4) [<c0601db8>] (cpuidle_enter_state) from [<c0183c74>] (cpu_startup_entry+0x198/0x3a0) [<c0183c74>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8) [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c) ------------------------------------------------------------------------ Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-26 10:42:25 -07:00
PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend I noticed some wakeirq flakeyness with consumer drivers not using autosuspend. For drivers not using autosuspend, the wakeirq may never get unmasked in rpm_suspend() because of irq desc->depth. We are configuring dedicated wakeirqs to start with IRQ_NOAUTOEN as we naturally don't want them running until rpm_suspend() is called. However, when a consumer driver initially calls pm_runtime_get(), we now wrongly start with disable_irq_nosync() call on the dedicated wakeirq that is disabled to start with. This causes desc->depth to toggle between 1 and 2 instead of the usual 0 and 1. This can prevent enable_irq() from unmasking the wakeirq as that only happens at desc->depth 1. This does not necessarily show up with drivers using autosuspend as there is time for disable_irq_nosync() before rpm_suspend() gets called after the autosuspend timeout. Let's fix the issue by adding wirq->status that lazily gets set on the first rpm_suspend(). We also need PM runtime core private functions for dev_pm_enable_wake_irq_check() and dev_pm_disable_wake_irq_check() so we can enable the dedicated wakeirq on the first rpm_suspend(). While at it, let's also fix the comments for dev_pm_enable_wake_irq() and dev_pm_disable_wake_irq(). Those can still be used by the consumer drivers as needed because the IRQ core manages the interrupt usecount for us. Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-05 16:38:16 -08:00
PM / Runtime: Use device PM QoS constraints (v2) Make the runtime PM core use device PM QoS constraints to check if it is allowed to suspend a given device, so that an error code is returned if the device's own PM QoS constraint is negative or one of its children has already been suspended for too long. If this is not the case, the maximum estimated time the device is allowed to be suspended, computed as the minimum of the device's PM QoS constraint and the PM QoS constraints of its children (reduced by the difference between the current time and their suspend times) is stored in a new device's PM field power.max_time_suspended_ns that can be used by the device's subsystem or PM domain to decide whether or not to put the device into lower-power (and presumably higher-latency) states later (if the constraint is 0, which means "no constraint", the power.max_time_suspended_ns is set to -1). Additionally, the time of execution of the subsystem-level .runtime_suspend() callback for the device is recorded in the new power.suspend_time field for later use by the device's subsystem or PM domain along with power.max_time_suspended_ns (it also is used by the core code when the device's parent is suspended). Introduce a new helper function, pm_runtime_update_max_time_suspended(), allowing subsystems and PM domains (or device drivers) to update the power.max_time_suspended_ns field, for example after changing the power state of a suspended device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-01 00:01:31 +01:00
PM / runtime: Use _rcuidle for runtime suspend tracepoints Further testing with false negatives suppressed by commit 293e2421fe25 ("rcu: Remove superfluous versions of rcu_read_lock_sched_held()") identified a few more unprotected uses of RCU from the idle loop. Because RCU actively ignores idle-loop code (for energy-efficiency reasons, among other things), using RCU from the idle loop can result in too-short grace periods, in turn resulting in arbitrary misbehavior. The affected function is rpm_suspend(). The resulting lockdep-RCU splat is as follows: ------------------------------------------------------------------------ Warning from omap3 =============================== [ INFO: suspicious RCU usage. ] 4.6.0-rc5-next-20160426+ #1112 Not tainted ------------------------------- include/trace/events/rpm.h:63 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: (&(&dev->power.lock)->rlock){-.-...}, at: [<c052ee24>] __pm_runtime_suspend+0x54/0x84 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1112 Hardware name: Generic OMAP36xx (Flattened Device Tree) [<c0110308>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14) [<c010c3a8>] (show_stack) from [<c047fec8>] (dump_stack+0xb0/0xe4) [<c047fec8>] (dump_stack) from [<c052d7b4>] (rpm_suspend+0x604/0x7e4) [<c052d7b4>] (rpm_suspend) from [<c052ee34>] (__pm_runtime_suspend+0x64/0x84) [<c052ee34>] (__pm_runtime_suspend) from [<c04bf3bc>] (omap2_gpio_prepare_for_idle+0x5c/0x70) [<c04bf3bc>] (omap2_gpio_prepare_for_idle) from [<c01255e8>] (omap_sram_idle+0x140/0x244) [<c01255e8>] (omap_sram_idle) from [<c0126b48>] (omap3_enter_idle_bm+0xfc/0x1ec) [<c0126b48>] (omap3_enter_idle_bm) from [<c0601db8>] (cpuidle_enter_state+0x80/0x3d4) [<c0601db8>] (cpuidle_enter_state) from [<c0183c74>] (cpu_startup_entry+0x198/0x3a0) [<c0183c74>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8) [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c) ------------------------------------------------------------------------ Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-26 10:42:25 -07:00
PM / Runtime: Use device PM QoS constraints (v2) Make the runtime PM core use device PM QoS constraints to check if it is allowed to suspend a given device, so that an error code is returned if the device's own PM QoS constraint is negative or one of its children has already been suspended for too long. If this is not the case, the maximum estimated time the device is allowed to be suspended, computed as the minimum of the device's PM QoS constraint and the PM QoS constraints of its children (reduced by the difference between the current time and their suspend times) is stored in a new device's PM field power.max_time_suspended_ns that can be used by the device's subsystem or PM domain to decide whether or not to put the device into lower-power (and presumably higher-latency) states later (if the constraint is 0, which means "no constraint", the power.max_time_suspended_ns is set to -1). Additionally, the time of execution of the subsystem-level .runtime_suspend() callback for the device is recorded in the new power.suspend_time field for later use by the device's subsystem or PM domain along with power.max_time_suspended_ns (it also is used by the core code when the device's parent is suspended). Introduce a new helper function, pm_runtime_update_max_time_suspended(), allowing subsystems and PM domains (or device drivers) to update the power.max_time_suspended_ns field, for example after changing the power state of a suspended device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-01 00:01:31 +01:00
PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend I noticed some wakeirq flakeyness with consumer drivers not using autosuspend. For drivers not using autosuspend, the wakeirq may never get unmasked in rpm_suspend() because of irq desc->depth. We are configuring dedicated wakeirqs to start with IRQ_NOAUTOEN as we naturally don't want them running until rpm_suspend() is called. However, when a consumer driver initially calls pm_runtime_get(), we now wrongly start with disable_irq_nosync() call on the dedicated wakeirq that is disabled to start with. This causes desc->depth to toggle between 1 and 2 instead of the usual 0 and 1. This can prevent enable_irq() from unmasking the wakeirq as that only happens at desc->depth 1. This does not necessarily show up with drivers using autosuspend as there is time for disable_irq_nosync() before rpm_suspend() gets called after the autosuspend timeout. Let's fix the issue by adding wirq->status that lazily gets set on the first rpm_suspend(). We also need PM runtime core private functions for dev_pm_enable_wake_irq_check() and dev_pm_disable_wake_irq_check() so we can enable the dedicated wakeirq on the first rpm_suspend(). While at it, let's also fix the comments for dev_pm_enable_wake_irq() and dev_pm_disable_wake_irq(). Those can still be used by the consumer drivers as needed because the IRQ core manages the interrupt usecount for us. Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-05 16:38:16 -08:00
PM / Runtime: Use device PM QoS constraints (v2) Make the runtime PM core use device PM QoS constraints to check if it is allowed to suspend a given device, so that an error code is returned if the device's own PM QoS constraint is negative or one of its children has already been suspended for too long. If this is not the case, the maximum estimated time the device is allowed to be suspended, computed as the minimum of the device's PM QoS constraint and the PM QoS constraints of its children (reduced by the difference between the current time and their suspend times) is stored in a new device's PM field power.max_time_suspended_ns that can be used by the device's subsystem or PM domain to decide whether or not to put the device into lower-power (and presumably higher-latency) states later (if the constraint is 0, which means "no constraint", the power.max_time_suspended_ns is set to -1). Additionally, the time of execution of the subsystem-level .runtime_suspend() callback for the device is recorded in the new power.suspend_time field for later use by the device's subsystem or PM domain along with power.max_time_suspended_ns (it also is used by the core code when the device's parent is suspended). Introduce a new helper function, pm_runtime_update_max_time_suspended(), allowing subsystems and PM domains (or device drivers) to update the power.max_time_suspended_ns field, for example after changing the power state of a suspended device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-01 00:01:31 +01:00
PM / Runtime: Use device PM QoS constraints (v2) Make the runtime PM core use device PM QoS constraints to check if it is allowed to suspend a given device, so that an error code is returned if the device's own PM QoS constraint is negative or one of its children has already been suspended for too long. If this is not the case, the maximum estimated time the device is allowed to be suspended, computed as the minimum of the device's PM QoS constraint and the PM QoS constraints of its children (reduced by the difference between the current time and their suspend times) is stored in a new device's PM field power.max_time_suspended_ns that can be used by the device's subsystem or PM domain to decide whether or not to put the device into lower-power (and presumably higher-latency) states later (if the constraint is 0, which means "no constraint", the power.max_time_suspended_ns is set to -1). Additionally, the time of execution of the subsystem-level .runtime_suspend() callback for the device is recorded in the new power.suspend_time field for later use by the device's subsystem or PM domain along with power.max_time_suspended_ns (it also is used by the core code when the device's parent is suspended). Introduce a new helper function, pm_runtime_update_max_time_suspended(), allowing subsystems and PM domains (or device drivers) to update the power.max_time_suspended_ns field, for example after changing the power state of a suspended device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-01 00:01:31 +01:00
PM / runtime: Add _rcuidle suffix to allow rpm_resume() to be called from idle This commit applies another _rcuidle suffix to fix an RCU use from idle. > =============================== > [ INFO: suspicious RCU usage. ] > 4.6.0-rc5-next-20160426+ #1122 Not tainted > ------------------------------- > include/trace/events/rpm.h:69 suspicious rcu_dereference_check() usage! > > other info that might help us debug this: > > > RCU used illegally from idle CPU! > rcu_scheduler_active = 1, debug_locks = 0 > RCU used illegally from extended quiescent state! > 1 lock held by swapper/0/0: > #0: (&(&dev->power.lock)->rlock){-.-...}, at: [<c052e3dc>] __pm_runtime_resume+0x3c/0x64 > > stack backtrace: > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1122 > Hardware name: Generic OMAP36xx (Flattened Device Tree) > [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14) > [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4) > [<c047fd68>] (dump_stack) from [<c052e178>] (rpm_resume+0x5cc/0x7f4) > [<c052e178>] (rpm_resume) from [<c052e3ec>] (__pm_runtime_resume+0x4c/0x64) > [<c052e3ec>] (__pm_runtime_resume) from [<c04bf2c4>] (omap2_gpio_resume_after_idle+0x54/0x68) > [<c04bf2c4>] (omap2_gpio_resume_after_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec) > [<c01269dc>] (omap3_enter_idle_bm) from [<c060198c>] (cpuidle_enter_state+0x80/0x3d4) > [<c060198c>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0) > [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8) > [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c) Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-26 13:38:55 -07:00
PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2 There are several drivers where the return value of pm_runtime_get_sync() is used to decide whether or not it is safe to access hardware and that don't provide .suspend() callbacks for system suspend (but may use late/noirq callbacks.) If such a driver happens to call pm_runtime_get_sync() during system suspend, after the core has disabled runtime PM, it will get the error code and will decide that the hardware should not be accessed, although this may be a wrong conclusion, depending on the state of the device when runtime PM was disabled. Drivers might work around this problem by using a test like: ret = pm_runtime_get_sync(dev); if (!ret || (ret == -EACCES && driver_private_data(dev)->suspended)) { /* access hardware */ } where driver_private_data(dev)->suspended is a flag set by the driver's .suspend() method (that would have to be added for this purpose). However, that potentially would need to be done by multiple drivers which means quite a lot of duplicated code and bloat. To avoid that we can use the observation that the core sets dev->power.is_suspended before disabling runtime PM and use that instead of the driver's private flag. Still, potentially many drivers would need to repeat that same check in quite a few places, so it's better to let the core do it. Then we can be a bit smarter and check whether or not runtime PM was disabled by the core only (disable_depth == 1) or by someone else in addition to the core (disable_depth > 1). In the former case rpm_resume() can return 1 if the runtime PM status is RPM_ACTIVE, because it means the device was active when the core disabled runtime PM. In the latter case it should still return -EACCES, because it isn't clear why runtime PM has been disabled. Tested on AM3730/Beagle-xM where a wakeup IRQ firing during the late suspend phase triggers runtime PM activity in the I2C driver since the wakeup IRQ is on an I2C-connected PMIC. [rjw: Modified whitespace to follow the file's convention.] Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-21 22:47:34 +00:00
PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend I noticed some wakeirq flakeyness with consumer drivers not using autosuspend. For drivers not using autosuspend, the wakeirq may never get unmasked in rpm_suspend() because of irq desc->depth. We are configuring dedicated wakeirqs to start with IRQ_NOAUTOEN as we naturally don't want them running until rpm_suspend() is called. However, when a consumer driver initially calls pm_runtime_get(), we now wrongly start with disable_irq_nosync() call on the dedicated wakeirq that is disabled to start with. This causes desc->depth to toggle between 1 and 2 instead of the usual 0 and 1. This can prevent enable_irq() from unmasking the wakeirq as that only happens at desc->depth 1. This does not necessarily show up with drivers using autosuspend as there is time for disable_irq_nosync() before rpm_suspend() gets called after the autosuspend timeout. Let's fix the issue by adding wirq->status that lazily gets set on the first rpm_suspend(). We also need PM runtime core private functions for dev_pm_enable_wake_irq_check() and dev_pm_disable_wake_irq_check() so we can enable the dedicated wakeirq on the first rpm_suspend(). While at it, let's also fix the comments for dev_pm_enable_wake_irq() and dev_pm_disable_wake_irq(). Those can still be used by the consumer drivers as needed because the IRQ core manages the interrupt usecount for us. Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-05 16:38:16 -08:00
PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend I noticed some wakeirq flakeyness with consumer drivers not using autosuspend. For drivers not using autosuspend, the wakeirq may never get unmasked in rpm_suspend() because of irq desc->depth. We are configuring dedicated wakeirqs to start with IRQ_NOAUTOEN as we naturally don't want them running until rpm_suspend() is called. However, when a consumer driver initially calls pm_runtime_get(), we now wrongly start with disable_irq_nosync() call on the dedicated wakeirq that is disabled to start with. This causes desc->depth to toggle between 1 and 2 instead of the usual 0 and 1. This can prevent enable_irq() from unmasking the wakeirq as that only happens at desc->depth 1. This does not necessarily show up with drivers using autosuspend as there is time for disable_irq_nosync() before rpm_suspend() gets called after the autosuspend timeout. Let's fix the issue by adding wirq->status that lazily gets set on the first rpm_suspend(). We also need PM runtime core private functions for dev_pm_enable_wake_irq_check() and dev_pm_disable_wake_irq_check() so we can enable the dedicated wakeirq on the first rpm_suspend(). While at it, let's also fix the comments for dev_pm_enable_wake_irq() and dev_pm_disable_wake_irq(). Those can still be used by the consumer drivers as needed because the IRQ core manages the interrupt usecount for us. Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-05 16:38:16 -08:00
PM / runtime: Add _rcuidle suffix to allow rpm_resume() to be called from idle This commit applies another _rcuidle suffix to fix an RCU use from idle. > =============================== > [ INFO: suspicious RCU usage. ] > 4.6.0-rc5-next-20160426+ #1122 Not tainted > ------------------------------- > include/trace/events/rpm.h:69 suspicious rcu_dereference_check() usage! > > other info that might help us debug this: > > > RCU used illegally from idle CPU! > rcu_scheduler_active = 1, debug_locks = 0 > RCU used illegally from extended quiescent state! > 1 lock held by swapper/0/0: > #0: (&(&dev->power.lock)->rlock){-.-...}, at: [<c052e3dc>] __pm_runtime_resume+0x3c/0x64 > > stack backtrace: > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1122 > Hardware name: Generic OMAP36xx (Flattened Device Tree) > [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14) > [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4) > [<c047fd68>] (dump_stack) from [<c052e178>] (rpm_resume+0x5cc/0x7f4) > [<c052e178>] (rpm_resume) from [<c052e3ec>] (__pm_runtime_resume+0x4c/0x64) > [<c052e3ec>] (__pm_runtime_resume) from [<c04bf2c4>] (omap2_gpio_resume_after_idle+0x54/0x68) > [<c04bf2c4>] (omap2_gpio_resume_after_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec) > [<c01269dc>] (omap3_enter_idle_bm) from [<c060198c>] (cpuidle_enter_state+0x80/0x3d4) > [<c060198c>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0) > [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8) > [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c) Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-26 13:38:55 -07:00
PM / runtime: Avoid false-positive warnings from might_sleep_if() The might_sleep_if() assertions in __pm_runtime_idle(), __pm_runtime_suspend() and __pm_runtime_resume() may generate false-positive warnings in some situations. For example, that happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair is executed with disabled interrupts within an outer pm_runtime_get_sync()/pm_runtime_put() section for the same device. [Generally, pm_runtime_get_sync() may sleep, so it should not be called with disabled interrupts, but in this particular case the previous pm_runtime_get_sync() guarantees that the device will not be suspended, so the inner pm_runtime_get_sync() will return immediately after incrementing the device's usage counter.] That started to happen in the i915 driver in 4.10-rc, leading to the following splat: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032 in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg 1 lock held by Xorg/1500: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0680c13>] i915_mutex_lock_interruptible+0x43/0x140 [i915] CPU: 0 PID: 1500 Comm: Xorg Not tainted Call Trace: dump_stack+0x85/0xc2 ___might_sleep+0x196/0x260 __might_sleep+0x53/0xb0 __pm_runtime_resume+0x7a/0x90 intel_runtime_pm_get+0x25/0x90 [i915] aliasing_gtt_bind_vma+0xaa/0xf0 [i915] i915_vma_bind+0xaf/0x1e0 [i915] i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915] i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915] ? trace_hardirqs_on+0xd/0x10 ? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915] ? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915] i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915] ? __might_fault+0x4e/0xb0 i915_gem_execbuffer2+0xc5/0x260 [i915] ? __might_fault+0x4e/0xb0 drm_ioctl+0x206/0x450 [drm] ? i915_gem_execbuffer+0x340/0x340 [i915] ? __fget+0x5/0x200 do_vfs_ioctl+0x91/0x6f0 ? __fget+0x111/0x200 ? __fget+0x5/0x200 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc6 even though the code triggering it is correct. Unfortunately, the might_sleep_if() assertions in question are too coarse-grained to cover such cases correctly, so make them a bit less sensitive in order to avoid the false-positives. Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-04 00:44:36 +01:00
PM / runtime: Avoid false-positive warnings from might_sleep_if() The might_sleep_if() assertions in __pm_runtime_idle(), __pm_runtime_suspend() and __pm_runtime_resume() may generate false-positive warnings in some situations. For example, that happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair is executed with disabled interrupts within an outer pm_runtime_get_sync()/pm_runtime_put() section for the same device. [Generally, pm_runtime_get_sync() may sleep, so it should not be called with disabled interrupts, but in this particular case the previous pm_runtime_get_sync() guarantees that the device will not be suspended, so the inner pm_runtime_get_sync() will return immediately after incrementing the device's usage counter.] That started to happen in the i915 driver in 4.10-rc, leading to the following splat: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032 in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg 1 lock held by Xorg/1500: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0680c13>] i915_mutex_lock_interruptible+0x43/0x140 [i915] CPU: 0 PID: 1500 Comm: Xorg Not tainted Call Trace: dump_stack+0x85/0xc2 ___might_sleep+0x196/0x260 __might_sleep+0x53/0xb0 __pm_runtime_resume+0x7a/0x90 intel_runtime_pm_get+0x25/0x90 [i915] aliasing_gtt_bind_vma+0xaa/0xf0 [i915] i915_vma_bind+0xaf/0x1e0 [i915] i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915] i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915] ? trace_hardirqs_on+0xd/0x10 ? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915] ? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915] i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915] ? __might_fault+0x4e/0xb0 i915_gem_execbuffer2+0xc5/0x260 [i915] ? __might_fault+0x4e/0xb0 drm_ioctl+0x206/0x450 [drm] ? i915_gem_execbuffer+0x340/0x340 [i915] ? __fget+0x5/0x200 do_vfs_ioctl+0x91/0x6f0 ? __fget+0x111/0x200 ? __fget+0x5/0x200 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc6 even though the code triggering it is correct. Unfortunately, the might_sleep_if() assertions in question are too coarse-grained to cover such cases correctly, so make them a bit less sensitive in order to avoid the false-positives. Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-04 00:44:36 +01:00
PM / runtime: Avoid false-positive warnings from might_sleep_if() The might_sleep_if() assertions in __pm_runtime_idle(), __pm_runtime_suspend() and __pm_runtime_resume() may generate false-positive warnings in some situations. For example, that happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair is executed with disabled interrupts within an outer pm_runtime_get_sync()/pm_runtime_put() section for the same device. [Generally, pm_runtime_get_sync() may sleep, so it should not be called with disabled interrupts, but in this particular case the previous pm_runtime_get_sync() guarantees that the device will not be suspended, so the inner pm_runtime_get_sync() will return immediately after incrementing the device's usage counter.] That started to happen in the i915 driver in 4.10-rc, leading to the following splat: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032 in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg 1 lock held by Xorg/1500: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0680c13>] i915_mutex_lock_interruptible+0x43/0x140 [i915] CPU: 0 PID: 1500 Comm: Xorg Not tainted Call Trace: dump_stack+0x85/0xc2 ___might_sleep+0x196/0x260 __might_sleep+0x53/0xb0 __pm_runtime_resume+0x7a/0x90 intel_runtime_pm_get+0x25/0x90 [i915] aliasing_gtt_bind_vma+0xaa/0xf0 [i915] i915_vma_bind+0xaf/0x1e0 [i915] i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915] i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915] ? trace_hardirqs_on+0xd/0x10 ? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915] ? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915] i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915] ? __might_fault+0x4e/0xb0 i915_gem_execbuffer2+0xc5/0x260 [i915] ? __might_fault+0x4e/0xb0 drm_ioctl+0x206/0x450 [drm] ? i915_gem_execbuffer+0x340/0x340 [i915] ? __fget+0x5/0x200 do_vfs_ioctl+0x91/0x6f0 ? __fget+0x111/0x200 ? __fget+0x5/0x200 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc6 even though the code triggering it is correct. Unfortunately, the might_sleep_if() assertions in question are too coarse-grained to cover such cases correctly, so make them a bit less sensitive in order to avoid the false-positives. Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-04 00:44:36 +01:00
PM / runtime: Re-init runtime PM states at probe error and driver unbind There are two common expectations among several subsystems/drivers that deploys runtime PM support, but which isn't met by the driver core. Expectation 1) At ->probe() the subsystem/driver expects the runtime PM status of the device to be RPM_SUSPENDED, which is the initial status being assigned at device registration. This expectation is especially common among some of those subsystems/ drivers that manages devices with an attached PM domain, as those requires the ->runtime_resume() callback at the PM domain level to be invoked during ->probe(). Moreover these subsystems/drivers entirely relies on runtime PM resources being managed at the PM domain level, thus don't implement their own set of runtime PM callbacks. These are two scenarios that suffers from this unmet expectation. i) A failed ->probe() sequence requests probe deferral: ->probe() ... pm_runtime_enable() pm_runtime_get_sync() ... err: pm_runtime_put() pm_runtime_disable() ... As there are no guarantees that such sequence turns the runtime PM status of the device into RPM_SUSPENDED, the re-trying ->probe() may start with the status in RPM_ACTIVE. In such case the runtime PM core won't invoke the ->runtime_resume() callback because of a pm_runtime_get_sync(), as it considers the device to be already runtime resumed. ii) A driver re-bind sequence: At driver unbind, the subsystem/driver's >remove() callback invokes a sequence of runtime PM APIs, to undo actions during ->probe() and to put the device into low power state. ->remove() ... pm_runtime_put() pm_runtime_disable() ... Similar as in the failing ->probe() case, this sequence don't guarantee the runtime PM status of the device to turn into RPM_SUSPENDED. Trying to re-bind the driver thus causes the same issue as when re-trying ->probe(), in the probe deferral scenario. Expectation 2) Drivers that invokes the pm_runtime_irq_safe() API during ->probe(), triggers the runtime PM core to increase the usage count for the device's parent and permanently make it runtime resumed. The usage count is only dropped at device removal, which also allows it to be runtime suspended again. A re-trying ->probe() repeats the call to pm_runtime_irq_safe() and thus once more triggers the usage count of the device's parent to be increased. This leads to not only an imbalance issue of the usage count of the device's parent, but also to keep it runtime resumed permanently even if ->probe() fails. To address these issues, let's change the policy of the driver core to meet these expectations. More precisely, at ->probe() failures and driver unbind, restore the initial states of runtime PM. Although to still allow subsystem's to control PM for devices that doesn't ->probe() successfully, don't restore the initial states unless runtime PM is disabled. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-18 11:48:39 +01:00
PM / runtime: Re-init runtime PM states at probe error and driver unbind There are two common expectations among several subsystems/drivers that deploys runtime PM support, but which isn't met by the driver core. Expectation 1) At ->probe() the subsystem/driver expects the runtime PM status of the device to be RPM_SUSPENDED, which is the initial status being assigned at device registration. This expectation is especially common among some of those subsystems/ drivers that manages devices with an attached PM domain, as those requires the ->runtime_resume() callback at the PM domain level to be invoked during ->probe(). Moreover these subsystems/drivers entirely relies on runtime PM resources being managed at the PM domain level, thus don't implement their own set of runtime PM callbacks. These are two scenarios that suffers from this unmet expectation. i) A failed ->probe() sequence requests probe deferral: ->probe() ... pm_runtime_enable() pm_runtime_get_sync() ... err: pm_runtime_put() pm_runtime_disable() ... As there are no guarantees that such sequence turns the runtime PM status of the device into RPM_SUSPENDED, the re-trying ->probe() may start with the status in RPM_ACTIVE. In such case the runtime PM core won't invoke the ->runtime_resume() callback because of a pm_runtime_get_sync(), as it considers the device to be already runtime resumed. ii) A driver re-bind sequence: At driver unbind, the subsystem/driver's >remove() callback invokes a sequence of runtime PM APIs, to undo actions during ->probe() and to put the device into low power state. ->remove() ... pm_runtime_put() pm_runtime_disable() ... Similar as in the failing ->probe() case, this sequence don't guarantee the runtime PM status of the device to turn into RPM_SUSPENDED. Trying to re-bind the driver thus causes the same issue as when re-trying ->probe(), in the probe deferral scenario. Expectation 2) Drivers that invokes the pm_runtime_irq_safe() API during ->probe(), triggers the runtime PM core to increase the usage count for the device's parent and permanently make it runtime resumed. The usage count is only dropped at device removal, which also allows it to be runtime suspended again. A re-trying ->probe() repeats the call to pm_runtime_irq_safe() and thus once more triggers the usage count of the device's parent to be increased. This leads to not only an imbalance issue of the usage count of the device's parent, but also to keep it runtime resumed permanently even if ->probe() fails. To address these issues, let's change the policy of the driver core to meet these expectations. More precisely, at ->probe() failures and driver unbind, restore the initial states of runtime PM. Although to still allow subsystem's to control PM for devices that doesn't ->probe() successfully, don't restore the initial states unless runtime PM is disabled. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-18 11:48:39 +01:00