kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-18 19:12:56 +00:00
Code Issues Releases Packages Activity
linux/drivers/net/netdevsim/dev.c

900 lines
24 KiB
Raw Normal View History

netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: implement dev probe/remove skeleton with port initialization Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:53 +02:00
netdevsim: extend device attrs to support port addition and deletion In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:54 +02:00
netdevsim: generate random switch id instead of using dev id Current implementation of parent_id/switch_id does not follow the original idea of being unique. The values are "0", "1", etc. Instead of that, generate 32 random bytes. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:51 +02:00
netdevsim: create devlink instance per netdevsim instance Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:42 +02:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: implement support for devlink region and snapshots Implement dummy region of size 32K and allow user to create snapshots or random data using debugfs file trigger. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 15:46:33 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: change debugfs tree topology With the model where dev is represented by devlink and ports are represented by devlink ports, make debugfs file names independent on netdev names. Change the topology to the one illustrated by the following example: $ ls /sys/kernel/debug/netdevsim/ netdevsim1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/ 0 1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:52 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: change debugfs tree topology With the model where dev is represented by devlink and ports are represented by devlink ports, make debugfs file names independent on netdev names. Change the topology to the one illustrated by the following example: $ ls /sys/kernel/debug/netdevsim/ netdevsim1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/ 0 1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:52 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: change debugfs tree topology With the model where dev is represented by devlink and ports are represented by devlink ports, make debugfs file names independent on netdev names. Change the topology to the one illustrated by the following example: $ ls /sys/kernel/debug/netdevsim/ netdevsim1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/ 0 1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:52 +02:00
netdevsim: implement fake flash updating with notifications Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04 15:40:43 +02:00
netdevsim: register couple of devlink params Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09 13:05:12 +02:00
netdevsim: implement support for devlink region and snapshots Implement dummy region of size 32K and allow user to create snapshots or random data using debugfs file trigger. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 15:46:33 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: change debugfs tree topology With the model where dev is represented by devlink and ports are represented by devlink ports, make debugfs file names independent on netdev names. Change the topology to the one illustrated by the following example: $ ls /sys/kernel/debug/netdevsim/ netdevsim1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/ 0 1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:52 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: implement dev probe/remove skeleton with port initialization Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:53 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05 22:13:21 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05 22:13:21 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05 22:13:21 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05 22:13:21 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05 22:13:21 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05 22:13:21 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05 22:13:21 +02:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05 22:13:21 +02:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05 22:13:21 +02:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05 22:13:21 +02:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: register couple of devlink params Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09 13:05:12 +02:00
netdevsim: implement support for devlink region and snapshots Implement dummy region of size 32K and allow user to create snapshots or random data using debugfs file trigger. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 15:46:33 +02:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
Documentation: Add description of netdevsim traps Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:21 +03:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: Set offsets to various protocol layers The driver periodically generates "trapped" UDP packets that it then passes on to devlink. Set the offsets to the various protocol layers. This is a prerequisite to the next patch, where drop monitor is taught to check that the offset to the MAC header was set. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:46:35 +03:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: Set offsets to various protocol layers The driver periodically generates "trapped" UDP packets that it then passes on to devlink. Set the offsets to the various protocol layers. This is a prerequisite to the next patch, where drop monitor is taught to check that the offset to the MAC header was set. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:46:35 +03:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: Fix build error without CONFIG_INET If CONFIG_INET is not set, building fails: drivers/net/netdevsim/dev.o: In function `nsim_dev_trap_report_work': dev.c:(.text+0x67b): undefined reference to `ip_send_check' Use ip_fast_csum instead of ip_send_check to avoid dependencies on CONFIG_INET. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: da58f90f11f5 ("netdevsim: Add devlink-trap support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20 22:14:46 +08:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: Set offsets to various protocol layers The driver periodically generates "trapped" UDP packets that it then passes on to devlink. Set the offsets to the various protocol layers. This is a prerequisite to the next patch, where drop monitor is taught to check that the offset to the MAC header was set. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:46:35 +03:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
net: devlink: split reload op into two In order to properly implement failure indication during reload, split the reload op into two ops, one for down phase and one for up phase. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-12 10:49:45 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: register couple of devlink params Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09 13:05:12 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: implement fake flash updating with notifications Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04 15:40:43 +02:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
net: devlink: split reload op into two In order to properly implement failure indication during reload, split the reload op into two ops, one for down phase and one for up phase. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-12 10:49:45 +02:00
netdevsim: implement fake flash updating with notifications Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04 15:40:43 +02:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: register couple of devlink params Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09 13:05:12 +02:00
netdevsim: implement dev probe/remove skeleton with port initialization Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:53 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Change nsim_devlink_setup to return error to caller Change nsim_devlink_setup to return any error back to the caller and update nsim_init to handle it. Requested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30 09:28:51 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: rename dev_init/exit() functions and make them independent on ns These functions are going to be called from bus probe/release(), therefore make them independent on ns struct and rename accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:49 +02:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: generate random switch id instead of using dev id Current implementation of parent_id/switch_id does not follow the original idea of being unique. The values are "0", "1", etc. Instead of that, generate 32 random bytes. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:51 +02:00
netdevsim: implement dev probe/remove skeleton with port initialization Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:53 +02:00
netdevsim: extend device attrs to support port addition and deletion In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:54 +02:00
netdevsim: implement fake flash updating with notifications Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04 15:40:43 +02:00
netdevsim: register couple of devlink params Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09 13:05:12 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: rename devlink.c to dev.c to contain per-dev(asic) items The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:43 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: rename dev_init/exit() functions and make them independent on ns These functions are going to be called from bus probe/release(), therefore make them independent on ns struct and rename accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:49 +02:00
netdevsim: create devlink instance per netdevsim instance Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:42 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: register couple of devlink params Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09 13:05:12 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: register couple of devlink params Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09 13:05:12 +02:00
netdevsim: implement support for devlink region and snapshots Implement dummy region of size 32K and allow user to create snapshots or random data using debugfs file trigger. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 15:46:33 +02:00
netdevsim: register couple of devlink params Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09 13:05:12 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: implement support for devlink region and snapshots Implement dummy region of size 32K and allow user to create snapshots or random data using debugfs file trigger. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 15:46:33 +02:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: register couple of devlink params Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09 13:05:12 +02:00
netdevsim: rename dev_init/exit() functions and make them independent on ns These functions are going to be called from bus probe/release(), therefore make them independent on ns struct and rename accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:49 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: implement support for devlink region and snapshots Implement dummy region of size 32K and allow user to create snapshots or random data using debugfs file trigger. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 15:46:33 +02:00
netdevsim: register couple of devlink params Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09 13:05:12 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: create devlink instance per netdevsim instance Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:42 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: rename dev_init/exit() functions and make them independent on ns These functions are going to be called from bus probe/release(), therefore make them independent on ns struct and rename accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:49 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: rename dev_init/exit() functions and make them independent on ns These functions are going to be called from bus probe/release(), therefore make them independent on ns struct and rename accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:49 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: Add devlink-trap support Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 16:28:20 +03:00
netdevsim: implement support for devlink region and snapshots Implement dummy region of size 32K and allow user to create snapshots or random data using debugfs file trigger. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 15:46:33 +02:00
netdevsim: register couple of devlink params Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09 13:05:12 +02:00
netdevsim: create devlink instance per netdevsim instance Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:42 +02:00
netdevsim: extend device attrs to support port addition and deletion In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:54 +02:00
netdevsim: create devlink instance per netdevsim instance Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:42 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: extend device attrs to support port addition and deletion In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:54 +02:00
netdevsim: implement dev probe/remove skeleton with port initialization Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:53 +02:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: implement dev probe/remove skeleton with port initialization Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:53 +02:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: implement dev probe/remove skeleton with port initialization Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:53 +02:00
netdevsim: extend device attrs to support port addition and deletion In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:54 +02:00
netdevsim: implement dev probe/remove skeleton with port initialization Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:53 +02:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: implement dev probe/remove skeleton with port initialization Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:53 +02:00
netdevsim: extend device attrs to support port addition and deletion In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:54 +02:00
netdevsim: implement dev probe/remove skeleton with port initialization Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:53 +02:00
netdevsim: extend device attrs to support port addition and deletion In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:54 +02:00
netdevsim: implement dev probe/remove skeleton with port initialization Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:53 +02:00
netdevsim: extend device attrs to support port addition and deletion In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:54 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: change debugfs tree topology With the model where dev is represented by devlink and ports are represented by devlink ports, make debugfs file names independent on netdev names. Change the topology to the one illustrated by the following example: $ ls /sys/kernel/debug/netdevsim/ netdevsim1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/ 0 1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:52 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00