kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-16 22:39:48 +00:00
Code Issues Releases Packages Activity
linux/arch/arm/include/asm/memory.h

263 lines
7.2 KiB
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] move include/asm-arm to arch/arm/include/asm Move platform independent header files to arch/arm/include/asm, leaving those in asm/arch* and asm/plat* alone. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-02 10:55:55 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 20:46:52 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] 5222/1: Allow configuring user:kernel split via Kconfig This patch adds a config option (CONFIG_VMSPLIT_*) to allow choosing between 3:1, 2:2 and 1:3 user:kernel memory splits. Tested-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-25 21:03:32 +01:00
[ARM] 3060/1: allow constants found in asm/memory.h to be used in asm code Patch from Nicolas Pitre This patch allows for assorted type of cleanups by letting assembly code use the same set of defines for constant values and avoid duplicated definitions that might not always be in sync, or that might simply be confusing due to the different names for the same thing. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-29 21:44:55 +01:00
[ARM] 5222/1: Allow configuring user:kernel split via Kconfig This patch adds a config option (CONFIG_VMSPLIT_*) to allow choosing between 3:1, 2:2 and 1:3 user:kernel memory splits. Tested-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-25 21:03:32 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 20:46:52 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] 5222/1: Allow configuring user:kernel split via Kconfig This patch adds a config option (CONFIG_VMSPLIT_*) to allow choosing between 3:1, 2:2 and 1:3 user:kernel memory splits. Tested-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-25 21:03:32 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] 5222/1: Allow configuring user:kernel split via Kconfig This patch adds a config option (CONFIG_VMSPLIT_*) to allow choosing between 3:1, 2:2 and 1:3 user:kernel memory splits. Tested-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-25 21:03:32 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] 3060/1: allow constants found in asm/memory.h to be used in asm code Patch from Nicolas Pitre This patch allows for assorted type of cleanups by letting assembly code use the same set of defines for constant values and avoid duplicated definitions that might not always be in sync, or that might simply be confusing due to the different names for the same thing. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-29 21:44:55 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 20:46:52 +01:00
Thumb-2: Add support for loadable modules Modules compiled to Thumb-2 have two additional relocations needing to be resolved at load time, R_ARM_THM_CALL and R_ARM_THM_JUMP24, for BL and B.W instructions. The maximum Thumb-2 addressing range is +/-2^24 (+/-16MB) therefore the MODULES_VADDR macro in asm/memory.h is set to (MODULES_END - 8MB) for the Thumb-2 compiled kernel. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:32:59 +01:00
[ARM] kmap support The kmap virtual area borrows a 2MB range at the top of the 16MB area below PAGE_OFFSET currently reserved for kernel modules and/or the XIP kernel. This 2MB corresponds to the range covered by 2 consecutive second-level page tables, or a single pmd entry as seen by the Linux page table abstraction. Because XIP kernels are unlikely to be seen on systems needing highmem support, there shouldn't be any shortage of VM space for modules (14 MB for modules is still way more than twice the typical usage). Because the virtual mapping of highmem pages can go away at any moment after kunmap() is called on them, we need to bypass the delayed cache flushing provided by flush_dcache_page() in that case. The atomic kmap versions are based on fixmaps, and __cpuc_flush_dcache_page() is used directly in that case. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-09-15 16:44:55 -04:00
Thumb-2: Add support for loadable modules Modules compiled to Thumb-2 have two additional relocations needing to be resolved at load time, R_ARM_THM_CALL and R_ARM_THM_JUMP24, for BL and B.W instructions. The maximum Thumb-2 addressing range is +/-2^24 (+/-16MB) therefore the MODULES_VADDR macro in asm/memory.h is set to (MODULES_END - 8MB) for the Thumb-2 compiled kernel. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:32:59 +01:00
[ARM] fix naming of MODULE_START / MODULE_END As of 73bdf0a60e607f4b8ecc5aec597105976565a84f, the kernel needs to know where modules are located in the virtual address space. On ARM, we located this region between MODULE_START and MODULE_END. Unfortunately, everyone else calls it MODULES_VADDR and MODULES_END. Update ARM to use the same naming, so is_vmalloc_or_module_addr() can work properly. Also update the comment on mm/vmalloc.c to reflect that ARM also places modules in a separate region from the vmalloc space. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-06 17:11:07 +00:00
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 20:46:52 +01:00
[ARM] kmap support The kmap virtual area borrows a 2MB range at the top of the 16MB area below PAGE_OFFSET currently reserved for kernel modules and/or the XIP kernel. This 2MB corresponds to the range covered by 2 consecutive second-level page tables, or a single pmd entry as seen by the Linux page table abstraction. Because XIP kernels are unlikely to be seen on systems needing highmem support, there shouldn't be any shortage of VM space for modules (14 MB for modules is still way more than twice the typical usage). Because the virtual mapping of highmem pages can go away at any moment after kunmap() is called on them, we need to bypass the delayed cache flushing provided by flush_dcache_page() in that case. The atomic kmap versions are based on fixmaps, and __cpuc_flush_dcache_page() is used directly in that case. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-09-15 16:44:55 -04:00
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 20:46:52 +01:00
[ARM] fix naming of MODULE_START / MODULE_END As of 73bdf0a60e607f4b8ecc5aec597105976565a84f, the kernel needs to know where modules are located in the virtual address space. On ARM, we located this region between MODULE_START and MODULE_END. Unfortunately, everyone else calls it MODULES_VADDR and MODULES_END. Update ARM to use the same naming, so is_vmalloc_or_module_addr() can work properly. Also update the comment on mm/vmalloc.c to reflect that ARM also places modules in a separate region from the vmalloc space. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-06 17:11:07 +00:00
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 20:46:52 +01:00
[ARM] Add section support to ioremap Allow section mappings to be setup using ioremap() and torn down with iounmap(). This requires additional support in the MM context switch to ensure that mappings are properly synchronised when mapped in. Based an original implementation by Deepak Saxena, reworked and ARMv6 support added by rmk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 20:17:15 +01:00
[ARM] 3705/1: add supersection support to ioremap() Patch from Lennert Buytenhek Analogous to the previous patch that allows ioremap() to use section mappings, this patch allows ioremap() to use supersection mappings. Original patch by Deepak Saxena. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 19:58:20 +01:00
[ARM] Add section support to ioremap Allow section mappings to be setup using ioremap() and torn down with iounmap(). This requires additional support in the MM context switch to ensure that mappings are properly synchronised when mapped in. Based an original implementation by Deepak Saxena, reworked and ARMv6 support added by rmk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 20:17:15 +01:00
[ARM] 3705/1: add supersection support to ioremap() Patch from Lennert Buytenhek Analogous to the previous patch that allows ioremap() to use section mappings, this patch allows ioremap() to use supersection mappings. Original patch by Deepak Saxena. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 19:58:20 +01:00
[ARM] Add section support to ioremap Allow section mappings to be setup using ioremap() and torn down with iounmap(). This requires additional support in the MM context switch to ensure that mappings are properly synchronised when mapped in. Based an original implementation by Deepak Saxena, reworked and ARMv6 support added by rmk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 20:17:15 +01:00
ARM: 5927/1: Make delimiters of DMA area globally visibly. Adds DMA area to 'virtual memory map' startup message Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-07 21:46:33 +01:00
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 20:46:52 +01:00
ARM: 5928/1: Change type of VMALLOC_END to unsigned long. Makes it consistent with VMALLOC_START Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-07 21:47:17 +01:00
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 20:46:52 +01:00
ARM: 5928/1: Change type of VMALLOC_END to unsigned long. Makes it consistent with VMALLOC_START Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-07 21:47:17 +01:00
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 20:46:52 +01:00
[ARM] fix naming of MODULE_START / MODULE_END As of 73bdf0a60e607f4b8ecc5aec597105976565a84f, the kernel needs to know where modules are located in the virtual address space. On ARM, we located this region between MODULE_START and MODULE_END. Unfortunately, everyone else calls it MODULES_VADDR and MODULES_END. Update ARM to use the same naming, so is_vmalloc_or_module_addr() can work properly. Also update the comment on mm/vmalloc.c to reflect that ARM also places modules in a separate region from the vmalloc space. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-06 17:11:07 +00:00
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 20:46:52 +01:00
ARM: 6225/1: make TCM allocation static and common for all archs This changes the TCM handling so that a fixed area is reserved at 0xfffe0000-0xfffeffff for TCM. This areas is used by XScale but XScale does not have TCM so the mechanisms are mutually exclusive. This change is needed to make TCM detection more dynamic while still being able to compile code into it, and is a must for the unified ARM goals: the current TCM allocation at different places in memory for each machine would be a nightmare if you want to compile a single image for more than one machine with TCM so it has to be nailed down in one place. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-12 21:53:28 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Revert "[ARM] unconditionally define __virt_to_phys and __phys_to_virt" This reverts commit 75f4aa15cf05ce6d99c8261cf57dcd749877fd1c. We have a couple of platforms which require non-linear P:V mappings, so we need these to be overridable. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-19 16:51:28 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Revert "[ARM] unconditionally define __virt_to_phys and __phys_to_virt" This reverts commit 75f4aa15cf05ce6d99c8261cf57dcd749877fd1c. We have a couple of platforms which require non-linear P:V mappings, so we need these to be overridable. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-19 16:51:28 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] 3070/2: Add __ioremap_pfn() API Patch from Deepak Saxena In working on adding 36-bit addressed supersection support to ioremap(), I came to the conclusion that it would be far simpler to do so by just splitting __ioremap() into a main external interface and adding an __ioremap_pfn() function that takes a pfn + offset into the page that __ioremap() can call. This way existing callers of __ioremap() won't have to change their code and 36-bit systems will just call __ioremap_pfn() and we will not have to deal with unsigned long long variables. Note that __ioremap_pfn() should _NOT_ be called directly by drivers but is reserved for use by arch_ioremap() implementations that map 32-bit resource regions into the real 36-bit address and then call this new function. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 19:23:11 +00:00
ARM: provide phys_to_page() to complement page_to_phys() Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2009-10-31 17:51:57 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ARM: Remove 'node' argument form arch_adjust_zones() Since we no longer support discontigmem, node is always zero, so remove this argument. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-22 20:58:51 +01:00
[ARM] 5295/1: make ZONE_DMA optional Most ARM machines don't need a special "DMA" memory zone, and when configured out, the kernel becomes a bit smaller: | text data bss dec hex filename |3826182 102384 111700 4040266 3da64a vmlinux |3823593 101616 111700 4036909 3d992d vmlinux.nodmazone This is because the system now has only one zone total which effect is to optimize away many conditionals in page allocation paths. So let's configure this zone only on machines that need split zones. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 20:14:55 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] 3194/1: add pfn_to_kaddr macro for ARM take2 Patch from Hiroki Kaminaga This patch defines a new macro: pfn_to_kaddr(pfn). Same macro is already defined on other arch, such as i386. Signed-off-by: Hiroki Kaminaga <kaminaga@sm.sony.co.jp> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-05 10:55:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] remove a common set of __virt_to_bus definitions Let's provide an overridable default instead of having every machine class define __virt_to_bus and __bus_to_virt to the same thing. What most platforms are using is bus_addr == phys_addr so such is the default. One exception is ebsa110 which has no DMA what so ever, so the actual definition is not important except only for proper compilation. Also added a comment about the special footbridge bus translation. Let's also remove comments alluding to set_dma_addr which is not (and should not) be commonly used. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05 21:53:30 -04:00
ARM: dma-mapping: simplify page_to_dma() and __pfn_to_bus() The non-highmem() and the __pfn_to_bus() based page_to_dma() both compile to the same code, so its pointless having these two different approaches. Use the __pfn_to_bus() based version. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2009-10-31 15:58:30 +00:00
[ARM] remove a common set of __virt_to_bus definitions Let's provide an overridable default instead of having every machine class define __virt_to_bus and __bus_to_virt to the same thing. What most platforms are using is bus_addr == phys_addr so such is the default. One exception is ebsa110 which has no DMA what so ever, so the actual definition is not important except only for proper compilation. Also added a comment about the special footbridge bus translation. Let's also remove comments alluding to set_dma_addr which is not (and should not) be commonly used. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05 21:53:30 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] Remove unnecessary extra parens in include/asm-arm/memory.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-04 16:25:47 +01:00
[ARM] Add initial sparsemem support Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 20:43:51 +00:00
[ARM] Remove unnecessary extra parens in include/asm-arm/memory.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-04 16:25:47 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] 3439/2: xsc3: add I/O coherency support Patch from Lennert Buytenhek This patch adds support for the I/O coherent cache available on the xsc3. The approach is to provide a simple API to determine whether the chipset supports coherency by calling arch_is_coherent() and then setting the appropriate system memory PTE and PMD bits. In addition, we call this API on dma_alloc_coherent() and dma_map_single() calls. A generic version exists that will compile out all the coherency-related code that is not needed on the majority of ARM systems. Note that we do not check for coherency in the dma_alloc_writecombine() function as that still requires a special PTE setting. We also don't touch dma_mmap_coherent() as that is a special ARM-only API that is by definition only used on non-coherent system. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 00:07:39 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] unify pfn_to_page: arm pfn_to_page ARM can use generic funcs. PFN_TO_NID, LOCAL_MAP_NR are defined by sub-archs. Signed-off-by: KAMEZAWA Hirotuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 01:15:37 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00