kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-20 19:23:40 +00:00
Code Issues Releases Packages Activity
linux/drivers/net/netdevsim/netdev.c

1253 lines
28 KiB
Raw Normal View History

netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add HDS feature HDS options(tcp-data-split, hds-thresh) have dependencies between other features like XDP. Basic dependencies are checked in the core API. netdevsim is very useful to check basic dependencies. The default tcp-data-split mode is UNKNOWN but netdevsim driver returns ENABLED when ethtool dumps tcp-data-split mode. The default value of HDS threshold is 0 and the maximum value is 1024. ethtool shows like this. ethtool -g eni1np1 Ring parameters for eni1np1: Pre-set maximums: ... HDS thresh: 1024 Current hardware settings: ... TCP data split: on HDS thresh: 0 ethtool -G eni1np1 tcp-data-split on hds-thresh 1024 ethtool -g eni1np1 Ring parameters for eni1np1: Pre-set maximums: ... HDS thresh: 1024 Current hardware settings: ... TCP data split: on HDS thresh: 1024 Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250114142852.3364986-10-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14 14:28:51 +00:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: report stats by default, like a real device Real devices should implement qstats. Devices which support pause or FEC configuration should also report the relevant stats. nsim was missing FEC stats completely, some of the qstats and pause stats required toggling a debugfs knob. Note that the tests which used pause always initialize the setting so they shouldn't be affected by the different starting value. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-04 19:45:24 -07:00
netdevsim: add debugfs-triggered queue reset Support triggering queue reset via debugfs for an upcoming test. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:45 -08:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
testing: net-drv: add basic shaper test Leverage a basic/dummy netdevsim implementation to do functional coverage for NL interface. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/43092afbf38365c796088bf8fc155e523ab434ae.1728460186.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-09 10:09:57 +02:00
net: move misc netdev_lock flavors to a separate header Move the more esoteric helpers for netdev instance lock to a dedicated header. This avoids growing netdevice.h to infinity and makes rebuilding the kernel much faster (after touching the header with the helpers). The main netdev_lock() / netdev_unlock() functions are used in static inlines in netdevice.h and will probably be used most commonly, so keep them in netdevice.h. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07 10:30:06 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add UDP tunnel port offload support Add UDP tunnel port handlers to our fake driver so we can test the core infra. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09 17:42:48 -07:00
netdevsim: Mark NAPI ID on skb in nsim_rcv Previously, nsim_rcv was not marking the NAPI ID on the skb, leading to applications seeing a napi ID of 0 when using SO_INCOMING_NAPI_ID. To add to the userland confusion, netlink appears to correctly report the NAPI IDs for netdevsim queues but the resulting file descriptor from a call to accept() was reporting a NAPI ID of 0. Signed-off-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250424002746.16891-2-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24 00:27:31 +00:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add debugfs-triggered queue reset Support triggering queue reset via debugfs for an upcoming test. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:45 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: implement peer queue flow control Add flow control mechanism between paired netdevsim devices to stop the TX queue during high traffic scenarios. When a receive queue becomes congested (approaching NSIM_RING_SIZE limit), the corresponding transmit queue on the peer device is stopped using netif_subqueue_try_stop(). Once the receive queue has sufficient capacity again, the peer's transmit queue is resumed with netif_tx_wake_queue(). Key changes: * Add nsim_stop_peer_tx_queue() to pause peer TX when RX queue is full * Add nsim_start_peer_tx_queue() to resume peer TX when RX queue drains * Implement queue mapping validation to ensure TX/RX queue count match * Wake all queues during device unlinking to prevent stuck queues * Use RCU protection when accessing peer device references * wake the queues when changing the queue numbers * Remove IFF_NO_QUEUE given it will enqueue packets now The flow control only activates when devices have matching TX/RX queue counts to ensure proper queue mapping. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250711-netdev_flow_control-v3-1-aa1d5a155762@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11 10:06:59 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: implement peer queue flow control Add flow control mechanism between paired netdevsim devices to stop the TX queue during high traffic scenarios. When a receive queue becomes congested (approaching NSIM_RING_SIZE limit), the corresponding transmit queue on the peer device is stopped using netif_subqueue_try_stop(). Once the receive queue has sufficient capacity again, the peer's transmit queue is resumed with netif_tx_wake_queue(). Key changes: * Add nsim_stop_peer_tx_queue() to pause peer TX when RX queue is full * Add nsim_start_peer_tx_queue() to resume peer TX when RX queue drains * Implement queue mapping validation to ensure TX/RX queue count match * Wake all queues during device unlinking to prevent stuck queues * Use RCU protection when accessing peer device references * wake the queues when changing the queue numbers * Remove IFF_NO_QUEUE given it will enqueue packets now The flow control only activates when devices have matching TX/RX queue counts to ensure proper queue mapping. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250711-netdev_flow_control-v3-1-aa1d5a155762@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11 10:06:59 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: implement peer queue flow control Add flow control mechanism between paired netdevsim devices to stop the TX queue during high traffic scenarios. When a receive queue becomes congested (approaching NSIM_RING_SIZE limit), the corresponding transmit queue on the peer device is stopped using netif_subqueue_try_stop(). Once the receive queue has sufficient capacity again, the peer's transmit queue is resumed with netif_tx_wake_queue(). Key changes: * Add nsim_stop_peer_tx_queue() to pause peer TX when RX queue is full * Add nsim_start_peer_tx_queue() to resume peer TX when RX queue drains * Implement queue mapping validation to ensure TX/RX queue count match * Wake all queues during device unlinking to prevent stuck queues * Use RCU protection when accessing peer device references * wake the queues when changing the queue numbers * Remove IFF_NO_QUEUE given it will enqueue packets now The flow control only activates when devices have matching TX/RX queue counts to ensure proper queue mapping. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250711-netdev_flow_control-v3-1-aa1d5a155762@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11 10:06:59 -07:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: forward skbs from one connected port to another Forward skbs sent from one netdevsim port to its connected netdevsim port using dev_forward_skb, in a spirit similar to veth. Add a tx_dropped variable to struct netdevsim, tracking the number of skbs that could not be forwarded using dev_forward_skb(). The xmit() function accessing the peer ptr is protected by an RCU read critical section. The rcu_read_lock() is functionally redundant as since v5.0 all softirqs are implicitly RCU read critical sections; but it is useful for human readers. If another CPU is concurrently in nsim_destroy(), then it will first set the peer ptr to NULL. This does not affect any existing readers that dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is a synchronize_rcu() before the netdev is actually unregistered and freed. This ensures that any readers i.e. xmit() that got a non-NULL peer will complete before the netdev is freed. Any readers after the RCU_INIT_POINTER() but before synchronize_rcu() will dereference NULL, making it safe. The codepath to nsim_destroy() and nsim_create() takes both the newly added nsim_dev_list_lock and rtnl_lock. This makes it safe with concurrent calls to linking two netdevsims together. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:50 -08:00
net: move HDS config from ethtool state Separate the HDS config from the ethtool state struct. The HDS config contains just simple parameters, not state. Having it as a separate struct will make it easier to clone / copy and also long term potentially make it per-queue. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250119020518.1962249-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18 18:05:11 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: forward skbs from one connected port to another Forward skbs sent from one netdevsim port to its connected netdevsim port using dev_forward_skb, in a spirit similar to veth. Add a tx_dropped variable to struct netdevsim, tracking the number of skbs that could not be forwarded using dev_forward_skb(). The xmit() function accessing the peer ptr is protected by an RCU read critical section. The rcu_read_lock() is functionally redundant as since v5.0 all softirqs are implicitly RCU read critical sections; but it is useful for human readers. If another CPU is concurrently in nsim_destroy(), then it will first set the peer ptr to NULL. This does not affect any existing readers that dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is a synchronize_rcu() before the netdev is actually unregistered and freed. This ensures that any readers i.e. xmit() that got a non-NULL peer will complete before the netdev is freed. Any readers after the RCU_INIT_POINTER() but before synchronize_rcu() will dereference NULL, making it safe. The codepath to nsim_destroy() and nsim_create() takes both the newly added nsim_dev_list_lock and rtnl_lock. This makes it safe with concurrent calls to linking two netdevsims together. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:50 -08:00
netdevsim: add ipsec offload testing Implement the IPsec/XFRM offload API for testing. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26 10:07:54 -07:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
netdevsim: add ipsec offload testing Implement the IPsec/XFRM offload API for testing. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26 10:07:54 -07:00
netdevsim: forward skbs from one connected port to another Forward skbs sent from one netdevsim port to its connected netdevsim port using dev_forward_skb, in a spirit similar to veth. Add a tx_dropped variable to struct netdevsim, tracking the number of skbs that could not be forwarded using dev_forward_skb(). The xmit() function accessing the peer ptr is protected by an RCU read critical section. The rcu_read_lock() is functionally redundant as since v5.0 all softirqs are implicitly RCU read critical sections; but it is useful for human readers. If another CPU is concurrently in nsim_destroy(), then it will first set the peer ptr to NULL. This does not affect any existing readers that dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is a synchronize_rcu() before the netdev is actually unregistered and freed. This ensures that any readers i.e. xmit() that got a non-NULL peer will complete before the netdev is freed. Any readers after the RCU_INIT_POINTER() but before synchronize_rcu() will dereference NULL, making it safe. The codepath to nsim_destroy() and nsim_create() takes both the newly added nsim_dev_list_lock and rtnl_lock. This makes it safe with concurrent calls to linking two netdevsims together. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:50 -08:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
netdevsim: forward skbs from one connected port to another Forward skbs sent from one netdevsim port to its connected netdevsim port using dev_forward_skb, in a spirit similar to veth. Add a tx_dropped variable to struct netdevsim, tracking the number of skbs that could not be forwarded using dev_forward_skb(). The xmit() function accessing the peer ptr is protected by an RCU read critical section. The rcu_read_lock() is functionally redundant as since v5.0 all softirqs are implicitly RCU read critical sections; but it is useful for human readers. If another CPU is concurrently in nsim_destroy(), then it will first set the peer ptr to NULL. This does not affect any existing readers that dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is a synchronize_rcu() before the netdev is actually unregistered and freed. This ensures that any readers i.e. xmit() that got a non-NULL peer will complete before the netdev is freed. Any readers after the RCU_INIT_POINTER() but before synchronize_rcu() will dereference NULL, making it safe. The codepath to nsim_destroy() and nsim_create() takes both the newly added nsim_dev_list_lock and rtnl_lock. This makes it safe with concurrent calls to linking two netdevsims together. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:50 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: move HDS config from ethtool state Separate the HDS config from the ethtool state struct. The HDS config contains just simple parameters, not state. Having it as a separate struct will make it easier to clone / copy and also long term potentially make it per-queue. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250119020518.1962249-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18 18:05:11 -08:00
netdevsim: add HDS feature HDS options(tcp-data-split, hds-thresh) have dependencies between other features like XDP. Basic dependencies are checked in the core API. netdevsim is very useful to check basic dependencies. The default tcp-data-split mode is UNKNOWN but netdevsim driver returns ENABLED when ethtool dumps tcp-data-split mode. The default value of HDS threshold is 0 and the maximum value is 1024. ethtool shows like this. ethtool -g eni1np1 Ring parameters for eni1np1: Pre-set maximums: ... HDS thresh: 1024 Current hardware settings: ... TCP data split: on HDS thresh: 0 ethtool -G eni1np1 tcp-data-split on hds-thresh 1024 ethtool -g eni1np1 Ring parameters for eni1np1: Pre-set maximums: ... HDS thresh: 1024 Current hardware settings: ... TCP data split: on HDS thresh: 1024 Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250114142852.3364986-10-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14 14:28:51 +00:00
net: move HDS config from ethtool state Separate the HDS config from the ethtool state struct. The HDS config contains just simple parameters, not state. Having it as a separate struct will make it easier to clone / copy and also long term potentially make it per-queue. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250119020518.1962249-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18 18:05:11 -08:00
netdevsim: add HDS feature HDS options(tcp-data-split, hds-thresh) have dependencies between other features like XDP. Basic dependencies are checked in the core API. netdevsim is very useful to check basic dependencies. The default tcp-data-split mode is UNKNOWN but netdevsim driver returns ENABLED when ethtool dumps tcp-data-split mode. The default value of HDS threshold is 0 and the maximum value is 1024. ethtool shows like this. ethtool -g eni1np1 Ring parameters for eni1np1: Pre-set maximums: ... HDS thresh: 1024 Current hardware settings: ... TCP data split: on HDS thresh: 0 ethtool -G eni1np1 tcp-data-split on hds-thresh 1024 ethtool -g eni1np1 Ring parameters for eni1np1: Pre-set maximums: ... HDS thresh: 1024 Current hardware settings: ... TCP data split: on HDS thresh: 1024 Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250114142852.3364986-10-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14 14:28:51 +00:00
netdevsim: forward skbs from one connected port to another Forward skbs sent from one netdevsim port to its connected netdevsim port using dev_forward_skb, in a spirit similar to veth. Add a tx_dropped variable to struct netdevsim, tracking the number of skbs that could not be forwarded using dev_forward_skb(). The xmit() function accessing the peer ptr is protected by an RCU read critical section. The rcu_read_lock() is functionally redundant as since v5.0 all softirqs are implicitly RCU read critical sections; but it is useful for human readers. If another CPU is concurrently in nsim_destroy(), then it will first set the peer ptr to NULL. This does not affect any existing readers that dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is a synchronize_rcu() before the netdev is actually unregistered and freed. This ensures that any readers i.e. xmit() that got a non-NULL peer will complete before the netdev is freed. Any readers after the RCU_INIT_POINTER() but before synchronize_rcu() will dereference NULL, making it safe. The codepath to nsim_destroy() and nsim_create() takes both the newly added nsim_dev_list_lock and rtnl_lock. This makes it safe with concurrent calls to linking two netdevsims together. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:50 -08:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
netdevsim: forward skbs from one connected port to another Forward skbs sent from one netdevsim port to its connected netdevsim port using dev_forward_skb, in a spirit similar to veth. Add a tx_dropped variable to struct netdevsim, tracking the number of skbs that could not be forwarded using dev_forward_skb(). The xmit() function accessing the peer ptr is protected by an RCU read critical section. The rcu_read_lock() is functionally redundant as since v5.0 all softirqs are implicitly RCU read critical sections; but it is useful for human readers. If another CPU is concurrently in nsim_destroy(), then it will first set the peer ptr to NULL. This does not affect any existing readers that dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is a synchronize_rcu() before the netdev is actually unregistered and freed. This ensures that any readers i.e. xmit() that got a non-NULL peer will complete before the netdev is freed. Any readers after the RCU_INIT_POINTER() but before synchronize_rcu() will dereference NULL, making it safe. The codepath to nsim_destroy() and nsim_create() takes both the newly added nsim_dev_list_lock and rtnl_lock. This makes it safe with concurrent calls to linking two netdevsims together. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:50 -08:00
netdevsim: call napi_schedule from a timer context The netdevsim driver was experiencing NOHZ tick-stop errors during packet transmission due to pending softirq work when calling napi_schedule(). This issue was observed when running the netconsole selftest, which triggered the following error message: NOHZ tick-stop error: local softirq work is pending, handler #08!!! To fix this issue, introduce a timer that schedules napi_schedule() from a timer context instead of calling it directly from the TX path. Create an hrtimer for each queue and kick it from the TX path, which then schedules napi_schedule() from the timer context. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250219-netdevsim-v3-1-811e2b8abc4c@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19 08:41:20 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: forward skbs from one connected port to another Forward skbs sent from one netdevsim port to its connected netdevsim port using dev_forward_skb, in a spirit similar to veth. Add a tx_dropped variable to struct netdevsim, tracking the number of skbs that could not be forwarded using dev_forward_skb(). The xmit() function accessing the peer ptr is protected by an RCU read critical section. The rcu_read_lock() is functionally redundant as since v5.0 all softirqs are implicitly RCU read critical sections; but it is useful for human readers. If another CPU is concurrently in nsim_destroy(), then it will first set the peer ptr to NULL. This does not affect any existing readers that dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is a synchronize_rcu() before the netdev is actually unregistered and freed. This ensures that any readers i.e. xmit() that got a non-NULL peer will complete before the netdev is freed. Any readers after the RCU_INIT_POINTER() but before synchronize_rcu() will dereference NULL, making it safe. The codepath to nsim_destroy() and nsim_create() takes both the newly added nsim_dev_list_lock and rtnl_lock. This makes it safe with concurrent calls to linking two netdevsims together. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:50 -08:00
netdevsim: fix UaF when counting Tx stats skb may be freed as soon as we put it on the rx queue. Use the len variable like the code did prior to the conversion. Fixes: f9e2511d80c2 ("netdevsim: migrate to dstats stats collection") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-20 10:40:07 -07:00
netdevsim: forward skbs from one connected port to another Forward skbs sent from one netdevsim port to its connected netdevsim port using dev_forward_skb, in a spirit similar to veth. Add a tx_dropped variable to struct netdevsim, tracking the number of skbs that could not be forwarded using dev_forward_skb(). The xmit() function accessing the peer ptr is protected by an RCU read critical section. The rcu_read_lock() is functionally redundant as since v5.0 all softirqs are implicitly RCU read critical sections; but it is useful for human readers. If another CPU is concurrently in nsim_destroy(), then it will first set the peer ptr to NULL. This does not affect any existing readers that dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is a synchronize_rcu() before the netdev is actually unregistered and freed. This ensures that any readers i.e. xmit() that got a non-NULL peer will complete before the netdev is freed. Any readers after the RCU_INIT_POINTER() but before synchronize_rcu() will dereference NULL, making it safe. The codepath to nsim_destroy() and nsim_create() takes both the newly added nsim_dev_list_lock and rtnl_lock. This makes it safe with concurrent calls to linking two netdevsims together. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:50 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
netdevsim: forward skbs from one connected port to another Forward skbs sent from one netdevsim port to its connected netdevsim port using dev_forward_skb, in a spirit similar to veth. Add a tx_dropped variable to struct netdevsim, tracking the number of skbs that could not be forwarded using dev_forward_skb(). The xmit() function accessing the peer ptr is protected by an RCU read critical section. The rcu_read_lock() is functionally redundant as since v5.0 all softirqs are implicitly RCU read critical sections; but it is useful for human readers. If another CPU is concurrently in nsim_destroy(), then it will first set the peer ptr to NULL. This does not affect any existing readers that dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is a synchronize_rcu() before the netdev is actually unregistered and freed. This ensures that any readers i.e. xmit() that got a non-NULL peer will complete before the netdev is freed. Any readers after the RCU_INIT_POINTER() but before synchronize_rcu() will dereference NULL, making it safe. The codepath to nsim_destroy() and nsim_create() takes both the newly added nsim_dev_list_lock and rtnl_lock. This makes it safe with concurrent calls to linking two netdevsims together. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:50 -08:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
netdevsim: forward skbs from one connected port to another Forward skbs sent from one netdevsim port to its connected netdevsim port using dev_forward_skb, in a spirit similar to veth. Add a tx_dropped variable to struct netdevsim, tracking the number of skbs that could not be forwarded using dev_forward_skb(). The xmit() function accessing the peer ptr is protected by an RCU read critical section. The rcu_read_lock() is functionally redundant as since v5.0 all softirqs are implicitly RCU read critical sections; but it is useful for human readers. If another CPU is concurrently in nsim_destroy(), then it will first set the peer ptr to NULL. This does not affect any existing readers that dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is a synchronize_rcu() before the netdev is actually unregistered and freed. This ensures that any readers i.e. xmit() that got a non-NULL peer will complete before the netdev is freed. Any readers after the RCU_INIT_POINTER() but before synchronize_rcu() will dereference NULL, making it safe. The codepath to nsim_destroy() and nsim_create() takes both the newly added nsim_dev_list_lock and rtnl_lock. This makes it safe with concurrent calls to linking two netdevsims together. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:50 -08:00
netdevsim: migrate to dstats stats collection Replace custom statistics tracking with the kernel's dstats infrastructure to simplify code and improve consistency with other network drivers. This change: - Sets dev->pcpu_stat_type = NETDEV_PCPU_STAT_DSTATS for automatic automatic allocation and deallocation. - Removes manual stats fields and their update - Replaces custom nsim_get_stats64() with dev_get_stats() - Uses dev_dstats_tx_add() and dev_dstats_tx_dropped() helpers - Eliminates the need for manual synchronization primitives The dstats framework provides the same functionality with less code. Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-1-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:42 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: 'support' multi-buf XDP Don't error out on large MTU if XDP is multi-buf. The ping test now tests ping with XDP and high MTU. netdevsim doesn't actually run the prog (yet?) so it doesn't matter if the prog was multi-buf.. Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/20250311092820.542148-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-11 10:28:20 +01:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
net: annotate writes on dev->mtu from ndo_change_mtu() Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-06 10:28:12 +00:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: Implement legacy/switchdev mode for VFs Implement callbacks to set/get eswitch mode value. Add helpers to check current mode. Instantiate VFs' net devices and devlink ports on switchdev enabling and remove them on legacy enabling. Changing number of VFs while in switchdev mode triggers VFs creation/deletion. Also disable NDO API callback to set VF rate, since it's legacy API. Switchdev API to set VF rate will be implemented in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:18 +03:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move vfconfig to nsim_dev When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-30 16:15:02 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
net: netdevsim: mimic tc-taprio offload To be able to use netdevsim for tc-testing with an offloaded tc-taprio schedule, it needs to report a PTP clock (which it now does), and to accept ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) calls. Since netdevsim has no packet I/O, this doesn't do anything intelligent, it only allows taprio offload code paths to go through some level of automated testing. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230807193324.4128292-9-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 22:33:21 +03:00
drivers: net: use flow block API This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 22:55:46 +02:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
net: flow_offload: add flow_block_cb_setup_simple() Most drivers do the same thing to set up the flow block callbacks, this patch adds a helper function to do this. This preparation patch reduces the number of changes to adapt the existing drivers to use the flow block callback API. This new helper function takes a flow block list per-driver, which is set to NULL until this driver list is used. This patch also introduces the flow_block_command and flow_block_binder_type enumerations, which are renamed to use FLOW_BLOCK_* in follow up patches. There are three definitions (aliases) in order to reduce the number of updates in this patch, which go away once drivers are fully adapted to use this flow block API. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 22:55:39 +02:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
net: netdevsim: mimic tc-taprio offload To be able to use netdevsim for tc-testing with an offloaded tc-taprio schedule, it needs to report a PTP clock (which it now does), and to accept ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) calls. Since netdevsim has no packet I/O, this doesn't do anything intelligent, it only allows taprio offload code paths to go through some level of automated testing. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230807193324.4128292-9-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 22:33:21 +03:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
drivers: net: use flow block API This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 22:55:46 +02:00
net: flow_offload: add flow_block_cb_setup_simple() Most drivers do the same thing to set up the flow block callbacks, this patch adds a helper function to do this. This preparation patch reduces the number of changes to adapt the existing drivers to use the flow block callback API. This new helper function takes a flow block list per-driver, which is set to NULL until this driver list is used. This patch also introduces the flow_block_command and flow_block_binder_type enumerations, which are renamed to use FLOW_BLOCK_* in follow up patches. There are three definitions (aliases) in order to reduce the number of updates in this patch, which go away once drivers are fully adapted to use this flow block API. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 22:55:39 +02:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add ndo_get_iflink() implementation Add an implementation for ndo_get_iflink() in netdevsim that shows the ifindex of the linked peer, if any. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:51 -08:00
netdevsim: fix backwards compatibility in nsim_get_iflink() The default ndo_get_iflink() implementation returns the current ifindex of the netdev. But the overridden nsim_get_iflink() returns 0 if the current nsim is not linked, breaking backwards compatibility for userspace that depend on this behaviour. Fix the problem by returning the current ifindex if not linked to a peer. Fixes: 8debcf5832c3 ("netdevsim: add ndo_get_iflink() implementation") Reported-by: Yu Watanabe <watanabe.yu@gmail.com> Suggested-by: Yu Watanabe <watanabe.yu@gmail.com> Signed-off-by: David Wei <dw@davidwei.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-06 07:59:08 -07:00
netdevsim: add ndo_get_iflink() implementation Add an implementation for ndo_get_iflink() in netdevsim that shows the ifindex of the linked peer, if any. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:51 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: collect statistics at RX side When the RX side of netdevsim was added, the RX statistics were missing, making the driver unusable for GenerateTraffic() test framework. This patch adds proper statistics tracking on RX side, complementing the TX path. Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-2-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:43 -07:00
net: netdevsim: hook in XDP handling Add basic XDP support by hooking in do_xdp_generic(). This should be enough to validate most basic XDP tests. Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Link: https://patch.msgid.link/20250719083059.3209169-2-mohsin.bashr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19 01:30:55 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: collect statistics at RX side When the RX side of netdevsim was added, the RX statistics were missing, making the driver unusable for GenerateTraffic() test framework. This patch adds proper statistics tracking on RX side, complementing the TX path. Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-2-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:43 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: netdevsim: hook in XDP handling Add basic XDP support by hooking in do_xdp_generic(). This should be enough to validate most basic XDP tests. Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Link: https://patch.msgid.link/20250719083059.3209169-2-mohsin.bashr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19 01:30:55 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: netdevsim: hook in XDP handling Add basic XDP support by hooking in do_xdp_generic(). This should be enough to validate most basic XDP tests. Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Link: https://patch.msgid.link/20250719083059.3209169-2-mohsin.bashr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19 01:30:55 -07:00
netdevsim: collect statistics at RX side When the RX side of netdevsim was added, the RX statistics were missing, making the driver unusable for GenerateTraffic() test framework. This patch adds proper statistics tracking on RX side, complementing the TX path. Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-2-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:43 -07:00
netdevsim: Mark NAPI ID on skb in nsim_rcv Previously, nsim_rcv was not marking the NAPI ID on the skb, leading to applications seeing a napi ID of 0 when using SO_INCOMING_NAPI_ID. To add to the userland confusion, netlink appears to correctly report the NAPI IDs for netdevsim queues but the resulting file descriptor from a call to accept() was reporting a NAPI ID of 0. Signed-off-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250424002746.16891-2-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24 00:27:31 +00:00
netdevsim: collect statistics at RX side When the RX side of netdevsim was added, the RX statistics were missing, making the driver unusable for GenerateTraffic() test framework. This patch adds proper statistics tracking on RX side, complementing the TX path. Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-2-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:43 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: implement peer queue flow control Add flow control mechanism between paired netdevsim devices to stop the TX queue during high traffic scenarios. When a receive queue becomes congested (approaching NSIM_RING_SIZE limit), the corresponding transmit queue on the peer device is stopped using netif_subqueue_try_stop(). Once the receive queue has sufficient capacity again, the peer's transmit queue is resumed with netif_tx_wake_queue(). Key changes: * Add nsim_stop_peer_tx_queue() to pause peer TX when RX queue is full * Add nsim_start_peer_tx_queue() to resume peer TX when RX queue drains * Implement queue mapping validation to ensure TX/RX queue count match * Wake all queues during device unlinking to prevent stuck queues * Use RCU protection when accessing peer device references * wake the queues when changing the queue numbers * Remove IFF_NO_QUEUE given it will enqueue packets now The flow control only activates when devices have matching TX/RX queue counts to ensure proper queue mapping. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250711-netdev_flow_control-v3-1-aa1d5a155762@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11 10:06:59 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: drv: netdevsim: don't napi_complete() from netpoll netdevsim supports netpoll. Make sure we don't call napi_complete() from it, since it may not be scheduled. Breno reports hitting a warning in napi_complete_done(): WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560 __napi_poll+0x2d8/0x3a0 handle_softirqs+0x1fe/0x710 This is presumably after netpoll stole the SCHED bit prematurely. Reported-by: Breno Leitao <leitao@debian.org> Fixes: 3762ec05a9fb ("netdevsim: add NAPI support") Tested-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250611174643.2769263-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11 10:46:43 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: hold netdev instance lock during ndo_open/ndo_stop For the drivers that use shaper API, switch to the mode where core stack holds the netdev lock. This affects two drivers: * iavf - already grabs netdev lock in ndo_open/ndo_stop, so mostly remove these * netdevsim - switch to _locked APIs to avoid deadlock iavf_close diff is a bit confusing, the existing call looks like this: iavf_close() { netdev_lock() .. netdev_unlock() wait_event_timeout(down_waitqueue) } I change it to the following: netdev_lock() iavf_close() { .. netdev_unlock() wait_event_timeout(down_waitqueue) netdev_lock() // reusing this lock call } netdev_unlock() Since I'm reusing existing netdev_lock call, so it looks like I only add netdev_unlock. Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:19 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: hold netdev instance lock during ndo_open/ndo_stop For the drivers that use shaper API, switch to the mode where core stack holds the netdev lock. This affects two drivers: * iavf - already grabs netdev lock in ndo_open/ndo_stop, so mostly remove these * netdevsim - switch to _locked APIs to avoid deadlock iavf_close diff is a bit confusing, the existing call looks like this: iavf_close() { netdev_lock() .. netdev_unlock() wait_event_timeout(down_waitqueue) } I change it to the following: netdev_lock() iavf_close() { .. netdev_unlock() wait_event_timeout(down_waitqueue) netdev_lock() // reusing this lock call } netdev_unlock() Since I'm reusing existing netdev_lock call, so it looks like I only add netdev_unlock. Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:19 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: call napi_schedule from a timer context The netdevsim driver was experiencing NOHZ tick-stop errors during packet transmission due to pending softirq work when calling napi_schedule(). This issue was observed when running the netconsole selftest, which triggered the following error message: NOHZ tick-stop error: local softirq work is pending, handler #08!!! To fix this issue, introduce a timer that schedules napi_schedule() from a timer context instead of calling it directly from the TX path. Create an hrtimer for each queue and kick it from the TX path, which then schedules napi_schedule() from the timer context. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250219-netdevsim-v3-1-811e2b8abc4c@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19 08:41:20 -08:00
treewide: Convert new and leftover hrtimer_init() users hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Coccinelle scripted cleanup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-04-04 19:31:15 +02:00
netdevsim: call napi_schedule from a timer context The netdevsim driver was experiencing NOHZ tick-stop errors during packet transmission due to pending softirq work when calling napi_schedule(). This issue was observed when running the netconsole selftest, which triggered the following error message: NOHZ tick-stop error: local softirq work is pending, handler #08!!! To fix this issue, introduce a timer that schedules napi_schedule() from a timer context instead of calling it directly from the TX path. Create an hrtimer for each queue and kick it from the TX path, which then schedules napi_schedule() from the timer context. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250219-netdevsim-v3-1-811e2b8abc4c@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19 08:41:20 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: hold netdev instance lock during ndo_open/ndo_stop For the drivers that use shaper API, switch to the mode where core stack holds the netdev lock. This affects two drivers: * iavf - already grabs netdev lock in ndo_open/ndo_stop, so mostly remove these * netdevsim - switch to _locked APIs to avoid deadlock iavf_close diff is a bit confusing, the existing call looks like this: iavf_close() { netdev_lock() .. netdev_unlock() wait_event_timeout(down_waitqueue) } I change it to the following: netdev_lock() iavf_close() { .. netdev_unlock() wait_event_timeout(down_waitqueue) netdev_lock() // reusing this lock call } netdev_unlock() Since I'm reusing existing netdev_lock call, so it looks like I only add netdev_unlock. Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:19 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: set the carrier when the device goes up Bringing a linked netdevsim device down and then up causes communication failure because both interfaces lack carrier. Basically a ifdown/ifup on the interface make the link broken. Commit 3762ec05a9fbda ("netdevsim: add NAPI support") added supported for NAPI, calling netif_carrier_off() in nsim_stop(). This patch re-enables the carrier symmetrically on nsim_open(), in case the device is linked and the peer is up. Signed-off-by: Breno Leitao <leitao@debian.org> Fixes: 3762ec05a9fbda ("netdevsim: add NAPI support") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20251014-netdevsim_fix-v2-1-53b40590dae1@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-14 02:17:25 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: hold netdev instance lock during ndo_open/ndo_stop For the drivers that use shaper API, switch to the mode where core stack holds the netdev lock. This affects two drivers: * iavf - already grabs netdev lock in ndo_open/ndo_stop, so mostly remove these * netdevsim - switch to _locked APIs to avoid deadlock iavf_close diff is a bit confusing, the existing call looks like this: iavf_close() { netdev_lock() .. netdev_unlock() wait_event_timeout(down_waitqueue) } I change it to the following: netdev_lock() iavf_close() { .. netdev_unlock() wait_event_timeout(down_waitqueue) netdev_lock() // reusing this lock call } netdev_unlock() Since I'm reusing existing netdev_lock call, so it looks like I only add netdev_unlock. Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:19 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: set the carrier when the device goes up Bringing a linked netdevsim device down and then up causes communication failure because both interfaces lack carrier. Basically a ifdown/ifup on the interface make the link broken. Commit 3762ec05a9fbda ("netdevsim: add NAPI support") added supported for NAPI, calling netif_carrier_off() in nsim_stop(). This patch re-enables the carrier symmetrically on nsim_open(), in case the device is linked and the peer is up. Signed-off-by: Breno Leitao <leitao@debian.org> Fixes: 3762ec05a9fbda ("netdevsim: add NAPI support") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20251014-netdevsim_fix-v2-1-53b40590dae1@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-14 02:17:25 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: hold netdev instance lock during ndo_open/ndo_stop For the drivers that use shaper API, switch to the mode where core stack holds the netdev lock. This affects two drivers: * iavf - already grabs netdev lock in ndo_open/ndo_stop, so mostly remove these * netdevsim - switch to _locked APIs to avoid deadlock iavf_close diff is a bit confusing, the existing call looks like this: iavf_close() { netdev_lock() .. netdev_unlock() wait_event_timeout(down_waitqueue) } I change it to the following: netdev_lock() iavf_close() { .. netdev_unlock() wait_event_timeout(down_waitqueue) netdev_lock() // reusing this lock call } netdev_unlock() Since I'm reusing existing netdev_lock call, so it looks like I only add netdev_unlock. Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:19 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: hold netdev instance lock during ndo_open/ndo_stop For the drivers that use shaper API, switch to the mode where core stack holds the netdev lock. This affects two drivers: * iavf - already grabs netdev lock in ndo_open/ndo_stop, so mostly remove these * netdevsim - switch to _locked APIs to avoid deadlock iavf_close diff is a bit confusing, the existing call looks like this: iavf_close() { netdev_lock() .. netdev_unlock() wait_event_timeout(down_waitqueue) } I change it to the following: netdev_lock() iavf_close() { .. netdev_unlock() wait_event_timeout(down_waitqueue) netdev_lock() // reusing this lock call } netdev_unlock() Since I'm reusing existing netdev_lock call, so it looks like I only add netdev_unlock. Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:19 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
testing: net-drv: add basic shaper test Leverage a basic/dummy netdevsim implementation to do functional coverage for NL interface. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/43092afbf38365c796088bf8fc155e523ab434ae.1728460186.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-09 10:09:57 +02:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add ndo_get_iflink() implementation Add an implementation for ndo_get_iflink() in netdevsim that shows the ifindex of the linked peer, if any. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:51 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
testing: net-drv: add basic shaper test Leverage a basic/dummy netdevsim implementation to do functional coverage for NL interface. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/43092afbf38365c796088bf8fc155e523ab434ae.1728460186.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-09 10:09:57 +02:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: report stats by default, like a real device Real devices should implement qstats. Devices which support pause or FEC configuration should also report the relevant stats. nsim was missing FEC stats completely, some of the qstats and pause stats required toggling a debugfs knob. Note that the tests which used pause always initialize the setting so they shouldn't be affected by the different starting value. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-04 19:45:24 -07:00
netdevsim: migrate to dstats stats collection Replace custom statistics tracking with the kernel's dstats infrastructure to simplify code and improve consistency with other network drivers. This change: - Sets dev->pcpu_stat_type = NETDEV_PCPU_STAT_DSTATS for automatic automatic allocation and deallocation. - Removes manual stats fields and their update - Replaces custom nsim_get_stats64() with dev_get_stats() - Uses dev_dstats_tx_add() and dev_dstats_tx_dropped() helpers - Eliminates the need for manual synchronization primitives The dstats framework provides the same functionality with less code. Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-1-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:42 -07:00
netdevsim: report stats by default, like a real device Real devices should implement qstats. Devices which support pause or FEC configuration should also report the relevant stats. nsim was missing FEC stats completely, some of the qstats and pause stats required toggling a debugfs knob. Note that the tests which used pause always initialize the setting so they shouldn't be affected by the different starting value. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-04 19:45:24 -07:00
netdevsim: migrate to dstats stats collection Replace custom statistics tracking with the kernel's dstats infrastructure to simplify code and improve consistency with other network drivers. This change: - Sets dev->pcpu_stat_type = NETDEV_PCPU_STAT_DSTATS for automatic automatic allocation and deallocation. - Removes manual stats fields and their update - Replaces custom nsim_get_stats64() with dev_get_stats() - Uses dev_dstats_tx_add() and dev_dstats_tx_dropped() helpers - Eliminates the need for manual synchronization primitives The dstats framework provides the same functionality with less code. Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-1-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:42 -07:00
netdevsim: report stats by default, like a real device Real devices should implement qstats. Devices which support pause or FEC configuration should also report the relevant stats. nsim was missing FEC stats completely, some of the qstats and pause stats required toggling a debugfs knob. Note that the tests which used pause always initialize the setting so they shouldn't be affected by the different starting value. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-04 19:45:24 -07:00
netdevsim: migrate to dstats stats collection Replace custom statistics tracking with the kernel's dstats infrastructure to simplify code and improve consistency with other network drivers. This change: - Sets dev->pcpu_stat_type = NETDEV_PCPU_STAT_DSTATS for automatic automatic allocation and deallocation. - Removes manual stats fields and their update - Replaces custom nsim_get_stats64() with dev_get_stats() - Uses dev_dstats_tx_add() and dev_dstats_tx_dropped() helpers - Eliminates the need for manual synchronization primitives The dstats framework provides the same functionality with less code. Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-1-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:42 -07:00
netdevsim: report stats by default, like a real device Real devices should implement qstats. Devices which support pause or FEC configuration should also report the relevant stats. nsim was missing FEC stats completely, some of the qstats and pause stats required toggling a debugfs knob. Note that the tests which used pause always initialize the setting so they shouldn't be affected by the different starting value. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-04 19:45:24 -07:00
netdevsim: add queue alloc/free helpers We'll need the code to allocate and free queues in the queue management API, factor it out. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:43 -08:00
netdevsim: call napi_schedule from a timer context The netdevsim driver was experiencing NOHZ tick-stop errors during packet transmission due to pending softirq work when calling napi_schedule(). This issue was observed when running the netconsole selftest, which triggered the following error message: NOHZ tick-stop error: local softirq work is pending, handler #08!!! To fix this issue, introduce a timer that schedules napi_schedule() from a timer context instead of calling it directly from the TX path. Create an hrtimer for each queue and kick it from the TX path, which then schedules napi_schedule() from the timer context. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250219-netdevsim-v3-1-811e2b8abc4c@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19 08:41:20 -08:00
netdevsim: add queue alloc/free helpers We'll need the code to allocate and free queues in the queue management API, factor it out. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:43 -08:00
netdevsim: account dropped packet length in stats on queue free Add a call to dev_dstats_rx_dropped_add() in nsim_queue_free() to account for the number of packets dropped when purging the skb queue. This improves the accuracy of RX drop statistics reported by netdevsim. local_bh_{disable, enable}() protection is used to disable preemption, which is necessary given that dev_dstats_rx_dropped_add() access this_cpu_ptr(). See discussion in [1]. Link: https://lore.kernel.org/all/20250617055934.3fd9d322@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-4-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:45 -07:00
netdevsim: add queue alloc/free helpers We'll need the code to allocate and free queues in the queue management API, factor it out. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:43 -08:00
netdevsim: call napi_schedule from a timer context The netdevsim driver was experiencing NOHZ tick-stop errors during packet transmission due to pending softirq work when calling napi_schedule(). This issue was observed when running the netconsole selftest, which triggered the following error message: NOHZ tick-stop error: local softirq work is pending, handler #08!!! To fix this issue, introduce a timer that schedules napi_schedule() from a timer context instead of calling it directly from the TX path. Create an hrtimer for each queue and kick it from the TX path, which then schedules napi_schedule() from the timer context. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250219-netdevsim-v3-1-811e2b8abc4c@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19 08:41:20 -08:00
netdevsim: Fix wild pointer access in nsim_queue_free(). syzbot reported the splat below. [0] When nsim_queue_uninit() is called from nsim_init_netdevsim(), register_netdevice() has not been called, thus dev->dstats has not been allocated. Let's not call dev_dstats_rx_dropped_add() in such a case. [0] BUG: unable to handle page fault for address: ffff88809782c020 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page PGD 1b401067 P4D 1b401067 PUD 0 Oops: Oops: 0002 [#1] SMP KASAN NOPTI CPU: 3 UID: 0 PID: 8476 Comm: syz.1.251 Not tainted 6.16.0-syzkaller-06699-ge8d780dcd957 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:local_add arch/x86/include/asm/local.h:33 [inline] RIP: 0010:u64_stats_add include/linux/u64_stats_sync.h:89 [inline] RIP: 0010:dev_dstats_rx_dropped_add include/linux/netdevice.h:3027 [inline] RIP: 0010:nsim_queue_free+0xba/0x120 drivers/net/netdevsim/netdev.c:714 Code: 07 77 6c 4a 8d 3c ed 20 7e f1 8d 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 46 4a 03 1c ed 20 7e f1 8d <4c> 01 63 20 be 00 02 00 00 48 8d 3d 00 00 00 00 e8 61 2f 58 fa 48 RSP: 0018:ffffc900044af150 EFLAGS: 00010286 RAX: dffffc0000000000 RBX: ffff88809782c000 RCX: 00000000000079c3 RDX: 1ffffffff1be2fc7 RSI: ffffffff8c15f380 RDI: ffffffff8df17e38 RBP: ffff88805f59d000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000003 R14: ffff88806ceb3d00 R15: ffffed100dfd308e FS: 0000000000000000(0000) GS:ffff88809782c000(0063) knlGS:00000000f505db40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: ffff88809782c020 CR3: 000000006fc6a000 CR4: 0000000000352ef0 Call Trace: <TASK> nsim_queue_uninit drivers/net/netdevsim/netdev.c:993 [inline] nsim_init_netdevsim drivers/net/netdevsim/netdev.c:1049 [inline] nsim_create+0xd0a/0x1260 drivers/net/netdevsim/netdev.c:1101 __nsim_dev_port_add+0x435/0x7d0 drivers/net/netdevsim/dev.c:1438 nsim_dev_port_add_all drivers/net/netdevsim/dev.c:1494 [inline] nsim_dev_reload_create drivers/net/netdevsim/dev.c:1546 [inline] nsim_dev_reload_up+0x5b8/0x860 drivers/net/netdevsim/dev.c:1003 devlink_reload+0x322/0x7c0 net/devlink/dev.c:474 devlink_nl_reload_doit+0xe31/0x1410 net/devlink/dev.c:584 genl_family_rcv_msg_doit+0x206/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x55c/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg net/socket.c:729 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2614 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2668 __sys_sendmsg+0x16d/0x220 net/socket.c:2700 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0x7c/0x3a0 arch/x86/entry/syscall_32.c:306 do_fast_syscall_32+0x32/0x80 arch/x86/entry/syscall_32.c:331 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf708e579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f505d55c EFLAGS: 00000296 ORIG_RAX: 0000000000000172 RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 0000000080000080 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: CR2: ffff88809782c020 Fixes: 2a68a22304f9 ("netdevsim: account dropped packet length in stats on queue free") Reported-by: syzbot+8aa80c6232008f7b957d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/688bb9ca.a00a0220.26d0e1.0050.GAE@google.com/ Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250812162130.4129322-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-12 16:21:26 +00:00
netdevsim: add queue alloc/free helpers We'll need the code to allocate and free queues in the queue management API, factor it out. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:43 -08:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: allow normal queue reset while down Resetting queues while the device is down should be legal. Allow it, test it. Ideally we'd test this with a real device supporting devmem but I don't have access to such devices. Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20250206225638.1387810-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-06 14:56:38 -08:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: allow normal queue reset while down Resetting queues while the device is down should be legal. Allow it, test it. Ideally we'd test this with a real device supporting devmem but I don't have access to such devices. Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20250206225638.1387810-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-06 14:56:38 -08:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
net: hold netdev instance lock during queue operations For the drivers that use queue management API, switch to the mode where core stack holds the netdev instance lock. This affects the following drivers: - bnxt - gve - netdevsim Originally I locked only start/stop, but switched to holding the lock over all iterations to make them look atomic to the device (feels like it should be easier to reason about). Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:23 -08:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: account dropped packet length in stats on queue free Add a call to dev_dstats_rx_dropped_add() in nsim_queue_free() to account for the number of packets dropped when purging the skb queue. This improves the accuracy of RX drop statistics reported by netdevsim. local_bh_{disable, enable}() protection is used to disable preemption, which is necessary given that dev_dstats_rx_dropped_add() access this_cpu_ptr(). See discussion in [1]. Link: https://lore.kernel.org/all/20250617055934.3fd9d322@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-4-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:45 -07:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
net: hold netdev instance lock during queue operations For the drivers that use queue management API, switch to the mode where core stack holds the netdev instance lock. This affects the following drivers: - bnxt - gve - netdevsim Originally I locked only start/stop, but switched to holding the lock over all iterations to make them look atomic to the device (feels like it should be easier to reason about). Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:23 -08:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: account dropped packet length in stats on queue free Add a call to dev_dstats_rx_dropped_add() in nsim_queue_free() to account for the number of packets dropped when purging the skb queue. This improves the accuracy of RX drop statistics reported by netdevsim. local_bh_{disable, enable}() protection is used to disable preemption, which is necessary given that dev_dstats_rx_dropped_add() access this_cpu_ptr(). See discussion in [1]. Link: https://lore.kernel.org/all/20250617055934.3fd9d322@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-4-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:45 -07:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
net: hold netdev instance lock during queue operations For the drivers that use queue management API, switch to the mode where core stack holds the netdev instance lock. This affects the following drivers: - bnxt - gve - netdevsim Originally I locked only start/stop, but switched to holding the lock over all iterations to make them look atomic to the device (feels like it should be easier to reason about). Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:23 -08:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
net: hold netdev instance lock during queue operations For the drivers that use queue management API, switch to the mode where core stack holds the netdev instance lock. This affects the following drivers: - bnxt - gve - netdevsim Originally I locked only start/stop, but switched to holding the lock over all iterations to make them look atomic to the device (feels like it should be easier to reason about). Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:23 -08:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
net: hold netdev instance lock during queue operations For the drivers that use queue management API, switch to the mode where core stack holds the netdev instance lock. This affects the following drivers: - bnxt - gve - netdevsim Originally I locked only start/stop, but switched to holding the lock over all iterations to make them look atomic to the device (feels like it should be easier to reason about). Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:23 -08:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
net: hold netdev instance lock during queue operations For the drivers that use queue management API, switch to the mode where core stack holds the netdev instance lock. This affects the following drivers: - bnxt - gve - netdevsim Originally I locked only start/stop, but switched to holding the lock over all iterations to make them look atomic to the device (feels like it should be easier to reason about). Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:23 -08:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
net: hold netdev instance lock during queue operations For the drivers that use queue management API, switch to the mode where core stack holds the netdev instance lock. This affects the following drivers: - bnxt - gve - netdevsim Originally I locked only start/stop, but switched to holding the lock over all iterations to make them look atomic to the device (feels like it should be easier to reason about). Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:23 -08:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
net: hold netdev instance lock during queue operations For the drivers that use queue management API, switch to the mode where core stack holds the netdev instance lock. This affects the following drivers: - bnxt - gve - netdevsim Originally I locked only start/stop, but switched to holding the lock over all iterations to make them look atomic to the device (feels like it should be easier to reason about). Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05 08:37:23 -08:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: add debugfs-triggered queue reset Support triggering queue reset via debugfs for an upcoming test. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:45 -08:00
net: drop rtnl_lock for queue_mgmt operations All drivers that use queue API are already converted to use netdev instance lock. Move netdev instance lock management to the netlink layer and drop rtnl_lock. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Mina Almasry. <almasrymina@google.com> Link: https://patch.msgid.link/20250311144026.4154277-4-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-11 07:40:26 -07:00
netdevsim: add debugfs-triggered queue reset Support triggering queue reset via debugfs for an upcoming test. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:45 -08:00
net: drop rtnl_lock for queue_mgmt operations All drivers that use queue API are already converted to use netdev instance lock. Move netdev instance lock management to the netlink layer and drop rtnl_lock. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Mina Almasry. <almasrymina@google.com> Link: https://patch.msgid.link/20250311144026.4154277-4-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-11 07:40:26 -07:00
netdevsim: add debugfs-triggered queue reset Support triggering queue reset via debugfs for an upcoming test. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:45 -08:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: access ->pp through netmem_desc instead of page To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make netdevsim access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-5-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-21 11:18:27 +09:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
net: netdevsim: fix nsim_pp_hold_write() nsim_pp_hold_write() has two problems: 1) It may return with rtnl held, as found by syzbot. 2) Its return value does not propagate an error if any. Fixes: 1580cbcbfe77 ("net: netdevsim: add some fake page pool use") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241216083703.1859921-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-16 08:37:03 +00:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: implement peer queue flow control Add flow control mechanism between paired netdevsim devices to stop the TX queue during high traffic scenarios. When a receive queue becomes congested (approaching NSIM_RING_SIZE limit), the corresponding transmit queue on the peer device is stopped using netif_subqueue_try_stop(). Once the receive queue has sufficient capacity again, the peer's transmit queue is resumed with netif_tx_wake_queue(). Key changes: * Add nsim_stop_peer_tx_queue() to pause peer TX when RX queue is full * Add nsim_start_peer_tx_queue() to resume peer TX when RX queue drains * Implement queue mapping validation to ensure TX/RX queue count match * Wake all queues during device unlinking to prevent stuck queues * Use RCU protection when accessing peer device references * wake the queues when changing the queue numbers * Remove IFF_NO_QUEUE given it will enqueue packets now The flow control only activates when devices have matching TX/RX queue counts to ensure proper queue mapping. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250711-netdev_flow_control-v3-1-aa1d5a155762@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11 10:06:59 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
selftests: net: validate team flags propagation Cover three recent cases: 1. missing ops locking for the lowers during netdev_sync_lower_features 2. missing locking for dev_set_promiscuity (plus netdev_ops_assert_locked with a comment on why/when it's needed) 3. rcu lock during team_change_rx_flags Verified that each one triggers when the respective fix is reverted. Not sure about the placement, but since it all relies on teaming, added to the teaming directory. One ugly bit is that I add NETIF_F_LRO to netdevsim; there is no way to trigger netdev_sync_lower_features without it. Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com> Link: https://patch.msgid.link/20250516232205.539266-1-stfomichev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16 16:22:05 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add more hw_features netdevsim currently only set HW_TC in its hw_features, but other features should also be present to better reflect the behavior of real HW. In my macsec offload testing, this ends up as HW_CSUM being missing from hw_features, so it doesn't stick in wanted_features when offload is turned off. Then HW_CSUM (and thus TSO, thanks to netdev_fix_features) is not automatically turned back on when offload is re-enabled. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/b918dc4dd76410a57f7516a855f66b0a2bd58326.1730929545.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07 00:13:27 +01:00
selftests: net: validate team flags propagation Cover three recent cases: 1. missing ops locking for the lowers during netdev_sync_lower_features 2. missing locking for dev_set_promiscuity (plus netdev_ops_assert_locked with a comment on why/when it's needed) 3. rcu lock during team_change_rx_flags Verified that each one triggers when the respective fix is reverted. Not sure about the placement, but since it all relies on teaming, added to the teaming directory. One ugly bit is that I add NETIF_F_LRO to netdevsim; there is no way to trigger netdev_sync_lower_features without it. Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com> Link: https://patch.msgid.link/20250516232205.539266-1-stfomichev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16 16:22:05 -07:00
netdevsim: add more hw_features netdevsim currently only set HW_TC in its hw_features, but other features should also be present to better reflect the behavior of real HW. In my macsec offload testing, this ends up as HW_CSUM being missing from hw_features, so it doesn't stick in wanted_features when offload is turned off. Then HW_CSUM (and thus TSO, thanks to netdev_fix_features) is not automatically turned back on when offload is re-enabled. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/b918dc4dd76410a57f7516a855f66b0a2bd58326.1730929545.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07 00:13:27 +01:00
netdevsim: migrate to dstats stats collection Replace custom statistics tracking with the kernel's dstats infrastructure to simplify code and improve consistency with other network drivers. This change: - Sets dev->pcpu_stat_type = NETDEV_PCPU_STAT_DSTATS for automatic automatic allocation and deallocation. - Removes manual stats fields and their update - Replaces custom nsim_get_stats64() with dev_get_stats() - Uses dev_dstats_tx_add() and dev_dstats_tx_dropped() helpers - Eliminates the need for manual synchronization primitives The dstats framework provides the same functionality with less code. Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-1-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:42 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
net: netdevsim: hook in XDP handling Add basic XDP support by hooking in do_xdp_generic(). This should be enough to validate most basic XDP tests. Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Link: https://patch.msgid.link/20250719083059.3209169-2-mohsin.bashr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19 01:30:55 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
netdevsim: add queue alloc/free helpers We'll need the code to allocate and free queues in the queue management API, factor it out. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:43 -08:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add queue alloc/free helpers We'll need the code to allocate and free queues in the queue management API, factor it out. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:43 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add queue alloc/free helpers We'll need the code to allocate and free queues in the queue management API, factor it out. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:43 -08:00
netdevsim: account dropped packet length in stats on queue free Add a call to dev_dstats_rx_dropped_add() in nsim_queue_free() to account for the number of packets dropped when purging the skb queue. This improves the accuracy of RX drop statistics reported by netdevsim. local_bh_{disable, enable}() protection is used to disable preemption, which is necessary given that dev_dstats_rx_dropped_add() access this_cpu_ptr(). See discussion in [1]. Link: https://lore.kernel.org/all/20250617055934.3fd9d322@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-4-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18 01:32:45 -07:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: allocate rqs individually Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:42 -08:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
net: netdevsim: use mock PHC driver I'd like to make netdevsim offload tc-taprio, but currently, this Qdisc emits a ETHTOOL_GET_TS_INFO call to the driver to make sure that it has a PTP clock, so that it is reasonably capable of offloading the schedule. By using the mock PHC driver, that becomes possible. Hardware timestamping is not necessary, and netdevsim does not support packet I/O anyway. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230807193324.4128292-8-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 22:33:20 +03:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
net: netdevsim: use mock PHC driver I'd like to make netdevsim offload tc-taprio, but currently, this Qdisc emits a ETHTOOL_GET_TS_INFO call to the driver to make sure that it has a PTP clock, so that it is reasonably capable of offloading the schedule. By using the mock PHC driver, that becomes possible. Hardware timestamping is not necessary, and netdevsim does not support packet I/O anyway. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230807193324.4128292-8-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 22:33:20 +03:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: report stats by default, like a real device Real devices should implement qstats. Devices which support pause or FEC configuration should also report the relevant stats. nsim was missing FEC stats completely, some of the qstats and pause stats required toggling a debugfs knob. Note that the tests which used pause always initialize the setting so they shouldn't be affected by the different starting value. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-04 19:45:24 -07:00
netdevsim: add queue management API support Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:44 -08:00
netdevsim: add dummy device notifiers In order to exercise and verify notifiers' locking assumptions, register dummy notifiers (via register_netdevice_notifier_dev_net). Share notifier event handler that enforces the assumptions with lock_debug.c (rename and export rtnl_net_debug_event as netdev_debug_event). Add ops lock asserts to netdev_debug_event. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250401163452.622454-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-01 09:34:46 -07:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
net: netdevsim: use mock PHC driver I'd like to make netdevsim offload tc-taprio, but currently, this Qdisc emits a ETHTOOL_GET_TS_INFO call to the driver to make sure that it has a PTP clock, so that it is reasonably capable of offloading the schedule. By using the mock PHC driver, that becomes possible. Hardware timestamping is not necessary, and netdevsim does not support packet I/O anyway. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230807193324.4128292-8-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 22:33:20 +03:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add dummy macsec offload When the kernel is compiled with MACsec support, add the NETIF_F_HW_MACSEC feature to netdevsim devices and implement macsec_ops. To allow easy testing of failure from the device, support is limited to 3 SecY's per netdevsim device, and 1 RXSC per SecY. v2: - nsim_macsec_add_secy, return -ENOSPC if secy_count isn't full but we can't find an empty slot (Simon Horman) - add sci_to_cpu to make sparse happy (Simon Horman) - remove set but not used secy variable (kernel test robot and Simon Horman) Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-13 15:20:23 +02:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: add dummy device notifiers In order to exercise and verify notifiers' locking assumptions, register dummy notifiers (via register_netdevice_notifier_dev_net). Share notifier event handler that enforces the assumptions with lock_debug.c (rename and export rtnl_net_debug_event as netdev_debug_event). Add ops lock asserts to netdev_debug_event. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250401163452.622454-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-01 09:34:46 -07:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
netdevsim: add dummy device notifiers In order to exercise and verify notifiers' locking assumptions, register dummy notifiers (via register_netdevice_notifier_dev_net). Share notifier event handler that enforces the assumptions with lock_debug.c (rename and export rtnl_net_debug_event as netdev_debug_event). Add ops lock asserts to netdev_debug_event. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250401163452.622454-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-01 09:34:46 -07:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: add dummy macsec offload When the kernel is compiled with MACsec support, add the NETIF_F_HW_MACSEC feature to netdevsim devices and implement macsec_ops. To allow easy testing of failure from the device, support is limited to 3 SecY's per netdevsim device, and 1 RXSC per SecY. v2: - nsim_macsec_add_secy, return -ENOSPC if secy_count isn't full but we can't find an empty slot (Simon Horman) - add sci_to_cpu to make sparse happy (Simon Horman) - remove set but not used secy variable (kernel test robot and Simon Horman) Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-13 15:20:23 +02:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: add NAPI support Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 09:32:27 -07:00
netdevsim: add queue alloc/free helpers We'll need the code to allocate and free queues in the queue management API, factor it out. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:43 -08:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
net: netdevsim: use mock PHC driver I'd like to make netdevsim offload tc-taprio, but currently, this Qdisc emits a ETHTOOL_GET_TS_INFO call to the driver to make sure that it has a PTP clock, so that it is reasonably capable of offloading the schedule. By using the mock PHC driver, that becomes possible. Hardware timestamping is not necessary, and netdevsim does not support packet I/O anyway. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230807193324.4128292-8-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 22:33:20 +03:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
net: netdevsim: don't try to destroy PHC on VFs PHC gets initialized in nsim_init_netdevsim(), which is only called if (nsim_dev_port_is_pf()). Create a counterpart of nsim_init_netdevsim() and move the mock_phc_destroy() there. This fixes a crash trying to destroy netdevsim with VFs instantiated, as caught by running the devlink.sh test: BUG: kernel NULL pointer dereference, address: 00000000000000b8 RIP: 0010:mock_phc_destroy+0xd/0x30 Call Trace: <TASK> nsim_destroy+0x4a/0x70 [netdevsim] __nsim_dev_port_del+0x47/0x70 [netdevsim] nsim_dev_reload_destroy+0x105/0x120 [netdevsim] nsim_drv_remove+0x2f/0xb0 [netdevsim] device_release_driver_internal+0x1a1/0x210 bus_remove_device+0xd5/0x120 device_del+0x159/0x490 device_unregister+0x12/0x30 del_device_store+0x11a/0x1a0 [netdevsim] kernfs_fop_write_iter+0x130/0x1d0 vfs_write+0x30b/0x4b0 ksys_write+0x69/0xf0 do_syscall_64+0xcc/0x1e0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 Fixes: b63e78fca889 ("net: netdevsim: use mock PHC driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-16 11:14:00 -08:00
net: netdevsim: Support setting dev->perm_addr on port creation Network management daemons that match on the device permanent address currently have no virtual interface types to test against. NetworkManager, in particular, has carried an out of tree patch to set the permanent address on netdevsim devices to use in its CI for this purpose. To support this use case, support setting netdev->perm_addr when creating a netdevsim port. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20250710-netdevsim-perm_addr-v4-1-c9db2fecf3bf@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-10 13:18:33 +02:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: move shared dev creation and destruction into separate file To make code easier to read, move shared dev bits into a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 14:49:26 +02:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: Add multi-queue support Currently netdevsim only supports a single queue per port, which is insufficient for testing multi-queue TC schedulers e.g. sch_mq. Extend the current sysfs interface so that users can create ports with multiple queues: $ echo "[ID] [PORT_COUNT] [NUM_QUEUES]" > /sys/bus/netdevsim/new_device As an example, echoing "2 4 8" creates 4 ports, with 8 queues per port. Note, this is compatible with the current interface, with default number of queues set to 1. For example, echoing "2 4" creates 4 ports with 1 queue per port; echoing "2" simply creates 1 port with 1 queue. Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-15 18:52:45 -07:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: move device registration on bus to be done earlier in init As a dependency of the subsequent patch, mode device registration to be done earlier, directly in nsim_newlink(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:41 +02:00
net: netdevsim: Support setting dev->perm_addr on port creation Network management daemons that match on the device permanent address currently have no virtual interface types to test against. NetworkManager, in particular, has carried an out of tree patch to set the permanent address on netdevsim devices to use in its CI for this purpose. To support this use case, support setting netdev->perm_addr when creating a netdevsim port. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20250710-netdevsim-perm_addr-v4-1-c9db2fecf3bf@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-10 13:18:33 +02:00
netdevsim: register port netdevices into net of device Register newly created port netdevice into net namespace that the parent device belongs to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:37 +02:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
net: make drivers to use SET_NETDEV_DEVLINK_PORT to set devlink_port Benefit from the previously implemented tracking of netdev events in devlink code and instead of calling devlink_port_type_eth_set() and devlink_port_type_clear() to set devlink port type and link to related netdev, use SET_NETDEV_DEVLINK_PORT() macro to assign devlink_port pointer to netdevice which is about to be registered. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-02 17:02:04 +01:00
netdevsim: add pause frame stats Add minimal ethtool interface for testing ethtool pause stats. v2: add missing static on nsim_ethtool_ops Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 17:11:54 -07:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: add UDP tunnel port offload support Add UDP tunnel port handlers to our fake driver so we can test the core infra. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09 17:42:48 -07:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: add debugfs-triggered queue reset Support triggering queue reset via debugfs for an upcoming test. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:45 -08:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: allow two netdevsim ports to be connected Add two netdevsim bus attribute to sysfs: /sys/bus/netdevsim/link_device /sys/bus/netdevsim/unlink_device Writing "A M B N" to link_device will link netdevsim M in netnsid A with netdevsim N in netnsid B. Writing "A M" to unlink_device will unlink netdevsim M in netnsid A from its peer, if any. rtnl_lock is taken to ensure nothing changes during the linking. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:49 -08:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: add debugfs-triggered queue reset Support triggering queue reset via debugfs for an upcoming test. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:45 -08:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: add dummy device notifiers In order to exercise and verify notifiers' locking assumptions, register dummy notifiers (via register_netdevice_notifier_dev_net). Share notifier event handler that enforces the assumptions with lock_debug.c (rename and export rtnl_net_debug_event as netdev_debug_event). Add ops lock asserts to netdev_debug_event. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250401163452.622454-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-01 09:34:46 -07:00
netdevsim: a basic test PSP implementation Provide a PSP implementation for netdevsim. Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation and decapsulation on skbs, but perform no encryption or decryption. In order to make encryption with a bad key result in a drop on the peer's rx side, we stash our psd's generation number in the first byte of each key before handing to the peer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com> Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-27 15:54:13 -07:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: allow two netdevsim ports to be connected Add two netdevsim bus attribute to sysfs: /sys/bus/netdevsim/link_device /sys/bus/netdevsim/unlink_device Writing "A M B N" to link_device will link netdevsim M in netnsid A with netdevsim N in netnsid B. Writing "A M" to unlink_device will unlink netdevsim M in netnsid A from its peer, if any. rtnl_lock is taken to ensure nothing changes during the linking. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:49 -08:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: add dummy macsec offload When the kernel is compiled with MACsec support, add the NETIF_F_HW_MACSEC feature to netdevsim devices and implement macsec_ops. To allow easy testing of failure from the device, support is limited to 3 SecY's per netdevsim device, and 1 RXSC per SecY. v2: - nsim_macsec_add_secy, return -ENOSPC if secy_count isn't full but we can't find an empty slot (Simon Horman) - add sci_to_cpu to make sparse happy (Simon Horman) - remove set but not used secy variable (kernel test robot and Simon Horman) Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-13 15:20:23 +02:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: add queue alloc/free helpers We'll need the code to allocate and free queues in the queue management API, factor it out. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07 08:08:43 -08:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: Implement VFs Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 15:17:17 +03:00
net: netdevsim: don't try to destroy PHC on VFs PHC gets initialized in nsim_init_netdevsim(), which is only called if (nsim_dev_port_is_pf()). Create a counterpart of nsim_init_netdevsim() and move the mock_phc_destroy() there. This fixes a crash trying to destroy netdevsim with VFs instantiated, as caught by running the devlink.sh test: BUG: kernel NULL pointer dereference, address: 00000000000000b8 RIP: 0010:mock_phc_destroy+0xd/0x30 Call Trace: <TASK> nsim_destroy+0x4a/0x70 [netdevsim] __nsim_dev_port_del+0x47/0x70 [netdevsim] nsim_dev_reload_destroy+0x105/0x120 [netdevsim] nsim_drv_remove+0x2f/0xb0 [netdevsim] device_release_driver_internal+0x1a1/0x210 bus_remove_device+0xd5/0x120 device_del+0x159/0x490 device_unregister+0x12/0x30 del_device_store+0x11a/0x1a0 [netdevsim] kernfs_fop_write_iter+0x130/0x1d0 vfs_write+0x30b/0x4b0 ksys_write+0x69/0xf0 do_syscall_64+0xcc/0x1e0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 Fixes: b63e78fca889 ("net: netdevsim: use mock PHC driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-16 11:14:00 -08:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: access ->pp through netmem_desc instead of page To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make netdevsim access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-5-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-21 11:18:27 +09:00
net: netdevsim: add some fake page pool use Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12 07:14:31 -07:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: allow two netdevsim ports to be connected Add two netdevsim bus attribute to sysfs: /sys/bus/netdevsim/link_device /sys/bus/netdevsim/unlink_device Writing "A M B N" to link_device will link netdevsim M in netnsid A with netdevsim N in netnsid B. Writing "A M" to unlink_device will unlink netdevsim M in netnsid A from its peer, if any. rtnl_lock is taken to ensure nothing changes during the linking. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28 15:22:49 -08:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: Add multi-queue support Currently netdevsim only supports a single queue per port, which is insufficient for testing multi-queue TC schedulers e.g. sch_mq. Extend the current sysfs interface so that users can create ports with multiple queues: $ echo "[ID] [PORT_COUNT] [NUM_QUEUES]" > /sys/bus/netdevsim/new_device As an example, echoing "2 4 8" creates 4 ports, with 8 queues per port. Note, this is compatible with the current interface, with default number of queues set to 1. For example, echoing "2 4" creates 4 ports with 1 queue per port; echoing "2" simply creates 1 port with 1 queue. Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-15 18:52:45 -07:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: move shared dev creation and destruction into separate file To make code easier to read, move shared dev bits into a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 14:49:26 +02:00
netdevsim: change debugfs tree topology With the model where dev is represented by devlink and ports are represented by devlink ports, make debugfs file names independent on netdev names. Change the topology to the one illustrated by the following example: $ ls /sys/kernel/debug/netdevsim/ netdevsim1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/ 0 1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:52 +02:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: put netdevsim bus code into separate file As the code related to netdevsim bus is going to get bigger, move the existing code to a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:44 +02:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: put netdevsim bus code into separate file As the code related to netdevsim bus is going to get bigger, move the existing code to a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:44 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: put netdevsim bus code into separate file As the code related to netdevsim bus is going to get bigger, move the existing code to a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:44 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
net: fill in MODULE_DESCRIPTION()s in kuba@'s modules W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Fill it in for the modules I maintain. Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27 14:13:08 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00