linux/include/linux/bitmap.h

426 lines
16 KiB

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
lib: bitmap: make nbits parameter of bitmap_empty unsigned Many functions in lib/bitmap.c start with an expression such as lim = bits/BITS_PER_LONG. Since bits has type (signed) int, and since gcc cannot know that it is in fact non-negative, it generates worse code than it could. These patches, mostly consisting of changing various parameters to unsigned, gives a slight overall code reduction: add/remove: 1/1 grow/shrink: 8/16 up/down: 251/-414 (-163) function old new delta tick_device_uses_broadcast 335 425 +90 __irq_alloc_descs 498 554 +56 __bitmap_andnot 73 115 +42 __bitmap_and 70 101 +31 bitmap_weight - 11 +11 copy_hugetlb_page_range 752 762 +10 follow_hugetlb_page 846 854 +8 hugetlb_init 1415 1417 +2 hugetlb_nrpages_setup 130 131 +1 hugetlb_add_hstate 377 376 -1 bitmap_allocate_region 82 80 -2 select_task_rq_fair 2202 2191 -11 hweight_long 66 55 -11 __reg_op 230 219 -11 dm_stats_message 2849 2833 -16 bitmap_parselist 92 74 -18 __bitmap_weight 115 97 -18 __bitmap_subset 153 129 -24 __bitmap_full 128 104 -24 __bitmap_empty 120 96 -24 bitmap_set 179 149 -30 bitmap_clear 185 155 -30 __bitmap_equal 136 105 -31 __bitmap_intersects 148 108 -40 __bitmap_complement 109 67 -42 tick_device_setup_broadcast_func.isra 81 - -81 [The increases in __bitmap_and{,not} are due to bug fixes 17/18,18/18. No idea why bitmap_weight suddenly appears.] While 163 bytes treewide is insignificant, I believe the bitmap functions are often called with locks held, so saving even a few cycles might be worth it. While making these changes, I found a few other things that might be worth including. 16,17,18 are actual bug fixes. The rest shouldn't change the behaviour of any of the functions, provided no-one passed negative nbits values. If something should come up, it should be fairly bisectable. A few issues I thought about, but didn't know what to do with: * Many of the functions misbehave if nbits is compile-time 0; the out-of-line functions generally handle 0 correctly. bitmap_fill() is particularly bad, whether the 0 is known at compile time or not. It would probably be nice to add detection of at least compile-time 0 and handle that appropriately. * I didn't change __bitmap_shift_{left,right} to use unsigned because I want to fully understand why the algorithm works before making that change. However, AFAICT, they behave correctly for all (positive) shift amounts. This is not the case for the small_const_nbits versions. If for example nbits = n = BITS_PER_LONG, the shift operators turn into no-ops (at least on x86), so one get *dst = *src, whereas one would expect to get *dst=0. That difference in behaviour is somewhat annoying. This patch (of 18): The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 16:09:49 -07:00
lib: bitmap: change bitmap_shift_right to take unsigned parameters I've previously changed the nbits parameter of most bitmap_* functions to unsigned; now it is bitmap_shift_{left,right}'s turn. This alone saves some .text, but while at it I found that there were a few other things one could do. The end result of these seven patches is $ scripts/bloat-o-meter /tmp/bitmap.o.{old,new} add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-328 (-328) function old new delta __bitmap_shift_right 384 226 -158 __bitmap_shift_left 306 136 -170 and less importantly also a smaller stack footprint $ stack-o-meter.pl master bitmap file function old new delta lib/bitmap.o __bitmap_shift_right 24 8 -16 lib/bitmap.o __bitmap_shift_left 24 0 -24 For each pair of 0 <= shift <= nbits <= 256 I've tested the end result with a few randomly filled src buffers (including garbage beyond nbits), in each case verifying that the shift {left,right}-most bits of dst are zero and the remaining nbits-shift bits correspond to src, so I'm fairly confident I didn't screw up. That hasn't stopped me from being wrong before, though. This patch (of 7): gcc can generate slightly better code for stuff like "nbits % BITS_PER_LONG" when it knows nbits is not negative. Since negative size bitmaps or shift amounts don't make sense, change these parameters of bitmap_shift_right to unsigned. The expressions involving "lim - 1" are still ok, since if lim is 0 the loop is never executed. Also use "shift" and "nbits" consistently for the parameter names. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 14:36:02 -08:00
mempolicy: add bitmap_onto() and bitmap_fold() operations The following adds two more bitmap operators, bitmap_onto() and bitmap_fold(), with the usual cpumask and nodemask wrappers. The bitmap_onto() operator computes one bitmap relative to another. If the n-th bit in the origin mask is set, then the m-th bit of the destination mask will be set, where m is the position of the n-th set bit in the relative mask. The bitmap_fold() operator folds a bitmap into a second that has bit m set iff the input bitmap has some bit n set, where m == n mod sz, for the specified sz value. There are two substantive changes between this patch and its predecessor bitmap_relative: 1) Renamed bitmap_relative() to be bitmap_onto(). 2) Added bitmap_fold(). The essential motivation for bitmap_onto() is to provide a mechanism for converting a cpuset-relative CPU or Node mask to an absolute mask. Cpuset relative masks are written as if the current task were in a cpuset whose CPUs or Nodes were just the consecutive ones numbered 0..N-1, for some N. The bitmap_onto() operator is provided in anticipation of adding support for the first such cpuset relative mask, by the mbind() and set_mempolicy() system calls, using a planned flag of MPOL_F_RELATIVE_NODES. These bitmap operators (and their nodemask wrappers, in particular) will be used in code that converts the user specified cpuset relative memory policy to a specific system node numbered policy, given the current mems_allowed of the tasks cpuset. Such cpuset relative mempolicies will address two deficiencies of the existing interface between cpusets and mempolicies: 1) A task cannot at present reliably establish a cpuset relative mempolicy because there is an essential race condition, in that the tasks cpuset may be changed in between the time the task can query its cpuset placement, and the time the task can issue the applicable mbind or set_memplicy system call. 2) A task cannot at present establish what cpuset relative mempolicy it would like to have, if it is in a smaller cpuset than it might have mempolicy preferences for, because the existing interface only allows specifying mempolicies for nodes currently allowed by the cpuset. Cpuset relative mempolicies are useful for tasks that don't distinguish particularly between one CPU or Node and another, but only between how many of each are allowed, and the proper placement of threads and memory pages on the various CPUs and Nodes available. The motivation for the added bitmap_fold() can be seen in the following example. Let's say an application has specified some mempolicies that presume 16 memory nodes, including say a mempolicy that specified MPOL_F_RELATIVE_NODES (cpuset relative) nodes 12-15. Then lets say that application is crammed into a cpuset that only has 8 memory nodes, 0-7. If one just uses bitmap_onto(), this mempolicy, mapped to that cpuset, would ignore the requested relative nodes above 7, leaving it empty of nodes. That's not good; better to fold the higher nodes down, so that some nodes are included in the resulting mapped mempolicy. In this case, the mempolicy nodes 12-15 are taken modulo 8 (the weight of the mems_allowed of the confining cpuset), resulting in a mempolicy specifying nodes 4-7. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: <kosaki.motohiro@jp.fujitsu.com> Cc: <ray-lk@madrabbit.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 02:12:29 -07:00
mempolicy: add bitmap_onto() and bitmap_fold() operations The following adds two more bitmap operators, bitmap_onto() and bitmap_fold(), with the usual cpumask and nodemask wrappers. The bitmap_onto() operator computes one bitmap relative to another. If the n-th bit in the origin mask is set, then the m-th bit of the destination mask will be set, where m is the position of the n-th set bit in the relative mask. The bitmap_fold() operator folds a bitmap into a second that has bit m set iff the input bitmap has some bit n set, where m == n mod sz, for the specified sz value. There are two substantive changes between this patch and its predecessor bitmap_relative: 1) Renamed bitmap_relative() to be bitmap_onto(). 2) Added bitmap_fold(). The essential motivation for bitmap_onto() is to provide a mechanism for converting a cpuset-relative CPU or Node mask to an absolute mask. Cpuset relative masks are written as if the current task were in a cpuset whose CPUs or Nodes were just the consecutive ones numbered 0..N-1, for some N. The bitmap_onto() operator is provided in anticipation of adding support for the first such cpuset relative mask, by the mbind() and set_mempolicy() system calls, using a planned flag of MPOL_F_RELATIVE_NODES. These bitmap operators (and their nodemask wrappers, in particular) will be used in code that converts the user specified cpuset relative memory policy to a specific system node numbered policy, given the current mems_allowed of the tasks cpuset. Such cpuset relative mempolicies will address two deficiencies of the existing interface between cpusets and mempolicies: 1) A task cannot at present reliably establish a cpuset relative mempolicy because there is an essential race condition, in that the tasks cpuset may be changed in between the time the task can query its cpuset placement, and the time the task can issue the applicable mbind or set_memplicy system call. 2) A task cannot at present establish what cpuset relative mempolicy it would like to have, if it is in a smaller cpuset than it might have mempolicy preferences for, because the existing interface only allows specifying mempolicies for nodes currently allowed by the cpuset. Cpuset relative mempolicies are useful for tasks that don't distinguish particularly between one CPU or Node and another, but only between how many of each are allowed, and the proper placement of threads and memory pages on the various CPUs and Nodes available. The motivation for the added bitmap_fold() can be seen in the following example. Let's say an application has specified some mempolicies that presume 16 memory nodes, including say a mempolicy that specified MPOL_F_RELATIVE_NODES (cpuset relative) nodes 12-15. Then lets say that application is crammed into a cpuset that only has 8 memory nodes, 0-7. If one just uses bitmap_onto(), this mempolicy, mapped to that cpuset, would ignore the requested relative nodes above 7, leaving it empty of nodes. That's not good; better to fold the higher nodes down, so that some nodes are included in the resulting mapped mempolicy. In this case, the mempolicy nodes 12-15 are taken modulo 8 (the weight of the mems_allowed of the confining cpuset), resulting in a mempolicy specifying nodes 4-7. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: <kosaki.motohiro@jp.fujitsu.com> Cc: <ray-lk@madrabbit.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 02:12:29 -07:00
lib: bitmap: make nbits parameter of bitmap_empty unsigned Many functions in lib/bitmap.c start with an expression such as lim = bits/BITS_PER_LONG. Since bits has type (signed) int, and since gcc cannot know that it is in fact non-negative, it generates worse code than it could. These patches, mostly consisting of changing various parameters to unsigned, gives a slight overall code reduction: add/remove: 1/1 grow/shrink: 8/16 up/down: 251/-414 (-163) function old new delta tick_device_uses_broadcast 335 425 +90 __irq_alloc_descs 498 554 +56 __bitmap_andnot 73 115 +42 __bitmap_and 70 101 +31 bitmap_weight - 11 +11 copy_hugetlb_page_range 752 762 +10 follow_hugetlb_page 846 854 +8 hugetlb_init 1415 1417 +2 hugetlb_nrpages_setup 130 131 +1 hugetlb_add_hstate 377 376 -1 bitmap_allocate_region 82 80 -2 select_task_rq_fair 2202 2191 -11 hweight_long 66 55 -11 __reg_op 230 219 -11 dm_stats_message 2849 2833 -16 bitmap_parselist 92 74 -18 __bitmap_weight 115 97 -18 __bitmap_subset 153 129 -24 __bitmap_full 128 104 -24 __bitmap_empty 120 96 -24 bitmap_set 179 149 -30 bitmap_clear 185 155 -30 __bitmap_equal 136 105 -31 __bitmap_intersects 148 108 -40 __bitmap_complement 109 67 -42 tick_device_setup_broadcast_func.isra 81 - -81 [The increases in __bitmap_and{,not} are due to bug fixes 17/18,18/18. No idea why bitmap_weight suddenly appears.] While 163 bytes treewide is insignificant, I believe the bitmap functions are often called with locks held, so saving even a few cycles might be worth it. While making these changes, I found a few other things that might be worth including. 16,17,18 are actual bug fixes. The rest shouldn't change the behaviour of any of the functions, provided no-one passed negative nbits values. If something should come up, it should be fairly bisectable. A few issues I thought about, but didn't know what to do with: * Many of the functions misbehave if nbits is compile-time 0; the out-of-line functions generally handle 0 correctly. bitmap_fill() is particularly bad, whether the 0 is known at compile time or not. It would probably be nice to add detection of at least compile-time 0 and handle that appropriately. * I didn't change __bitmap_shift_{left,right} to use unsigned because I want to fully understand why the algorithm works before making that change. However, AFAICT, they behave correctly for all (positive) shift amounts. This is not the case for the small_const_nbits versions. If for example nbits = n = BITS_PER_LONG, the shift operators turn into no-ops (at least on x86), so one get *dst = *src, whereas one would expect to get *dst=0. That difference in behaviour is somewhat annoying. This patch (of 18): The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 16:09:49 -07:00
lib: bitmap: change bitmap_shift_right to take unsigned parameters I've previously changed the nbits parameter of most bitmap_* functions to unsigned; now it is bitmap_shift_{left,right}'s turn. This alone saves some .text, but while at it I found that there were a few other things one could do. The end result of these seven patches is $ scripts/bloat-o-meter /tmp/bitmap.o.{old,new} add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-328 (-328) function old new delta __bitmap_shift_right 384 226 -158 __bitmap_shift_left 306 136 -170 and less importantly also a smaller stack footprint $ stack-o-meter.pl master bitmap file function old new delta lib/bitmap.o __bitmap_shift_right 24 8 -16 lib/bitmap.o __bitmap_shift_left 24 0 -24 For each pair of 0 <= shift <= nbits <= 256 I've tested the end result with a few randomly filled src buffers (including garbage beyond nbits), in each case verifying that the shift {left,right}-most bits of dst are zero and the remaining nbits-shift bits correspond to src, so I'm fairly confident I didn't screw up. That hasn't stopped me from being wrong before, though. This patch (of 7): gcc can generate slightly better code for stuff like "nbits % BITS_PER_LONG" when it knows nbits is not negative. Since negative size bitmaps or shift amounts don't make sense, change these parameters of bitmap_shift_right to unsigned. The expressions involving "lim - 1" are still ok, since if lim is 0 the loop is never executed. Also use "shift" and "nbits" consistently for the parameter names. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 14:36:02 -08:00
lib: bitmap: change bitmap_shift_right to take unsigned parameters I've previously changed the nbits parameter of most bitmap_* functions to unsigned; now it is bitmap_shift_{left,right}'s turn. This alone saves some .text, but while at it I found that there were a few other things one could do. The end result of these seven patches is $ scripts/bloat-o-meter /tmp/bitmap.o.{old,new} add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-328 (-328) function old new delta __bitmap_shift_right 384 226 -158 __bitmap_shift_left 306 136 -170 and less importantly also a smaller stack footprint $ stack-o-meter.pl master bitmap file function old new delta lib/bitmap.o __bitmap_shift_right 24 8 -16 lib/bitmap.o __bitmap_shift_left 24 0 -24 For each pair of 0 <= shift <= nbits <= 256 I've tested the end result with a few randomly filled src buffers (including garbage beyond nbits), in each case verifying that the shift {left,right}-most bits of dst are zero and the remaining nbits-shift bits correspond to src, so I'm fairly confident I didn't screw up. That hasn't stopped me from being wrong before, though. This patch (of 7): gcc can generate slightly better code for stuff like "nbits % BITS_PER_LONG" when it knows nbits is not negative. Since negative size bitmaps or shift amounts don't make sense, change these parameters of bitmap_shift_right to unsigned. The expressions involving "lim - 1" are still ok, since if lim is 0 the loop is never executed. Also use "shift" and "nbits" consistently for the parameter names. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 14:36:02 -08:00
lib: bitmap: change bitmap_shift_right to take unsigned parameters I've previously changed the nbits parameter of most bitmap_* functions to unsigned; now it is bitmap_shift_{left,right}'s turn. This alone saves some .text, but while at it I found that there were a few other things one could do. The end result of these seven patches is $ scripts/bloat-o-meter /tmp/bitmap.o.{old,new} add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-328 (-328) function old new delta __bitmap_shift_right 384 226 -158 __bitmap_shift_left 306 136 -170 and less importantly also a smaller stack footprint $ stack-o-meter.pl master bitmap file function old new delta lib/bitmap.o __bitmap_shift_right 24 8 -16 lib/bitmap.o __bitmap_shift_left 24 0 -24 For each pair of 0 <= shift <= nbits <= 256 I've tested the end result with a few randomly filled src buffers (including garbage beyond nbits), in each case verifying that the shift {left,right}-most bits of dst are zero and the remaining nbits-shift bits correspond to src, so I'm fairly confident I didn't screw up. That hasn't stopped me from being wrong before, though. This patch (of 7): gcc can generate slightly better code for stuff like "nbits % BITS_PER_LONG" when it knows nbits is not negative. Since negative size bitmaps or shift amounts don't make sense, change these parameters of bitmap_shift_right to unsigned. The expressions involving "lim - 1" are still ok, since if lim is 0 the loop is never executed. Also use "shift" and "nbits" consistently for the parameter names. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 14:36:02 -08:00