kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-18 19:12:56 +00:00
Code Issues Releases Packages Activity
linux/drivers/net/netdevsim/netdev.c

384 lines
9.2 KiB
Raw Normal View History

netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add ipsec offload testing Implement the IPsec/XFRM offload API for testing. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26 10:07:54 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add ipsec offload testing Implement the IPsec/XFRM offload API for testing. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26 10:07:54 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add support for simultaneous driver and hw XDP Allow netdevsim to accept driver and offload attachment of XDP BPF programs at the same time. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-11 20:36:42 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
drivers: net: use flow block API This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 22:55:46 +02:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
net: flow_offload: add flow_block_cb_setup_simple() Most drivers do the same thing to set up the flow block callbacks, this patch adds a helper function to do this. This preparation patch reduces the number of changes to adapt the existing drivers to use the flow block callback API. This new helper function takes a flow block list per-driver, which is set to NULL until this driver list is used. This patch also introduces the flow_block_command and flow_block_binder_type enumerations, which are renamed to use FLOW_BLOCK_* in follow up patches. There are three definitions (aliases) in order to reduce the number of updates in this patch, which go away once drivers are fully adapted to use this flow block API. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 22:55:39 +02:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
drivers: net: use flow block API This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 22:55:46 +02:00
net: flow_offload: add flow_block_cb_setup_simple() Most drivers do the same thing to set up the flow block callbacks, this patch adds a helper function to do this. This preparation patch reduces the number of changes to adapt the existing drivers to use the flow block callback API. This new helper function takes a flow block list per-driver, which is set to NULL until this driver list is used. This patch also introduces the flow_block_command and flow_block_binder_type enumerations, which are renamed to use FLOW_BLOCK_* in follow up patches. There are three definitions (aliases) in order to reduce the number of updates in this patch, which go away once drivers are fully adapted to use this flow block API. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 22:55:39 +02:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: implement ndo_get_devlink_port Implement ndo_get_devlink_port and allow switch_id and port_name to be handled by devlink. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:56 +02:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: implement ndo_get_devlink_port Implement ndo_get_devlink_port and allow switch_id and port_name to be handled by devlink. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:56 +02:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: move shared dev creation and destruction into separate file To make code easier to read, move shared dev bits into a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 14:49:26 +02:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: move device registration on bus to be done earlier in init As a dependency of the subsequent patch, mode device registration to be done earlier, directly in nsim_newlink(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:41 +02:00
netdevsim: register port netdevices into net of device Register newly created port netdevice into net namespace that the parent device belongs to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:37 +02:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: move device registration and related code to bus.c Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:45 +02:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: move device registration on bus to be done earlier in init As a dependency of the subsequent patch, mode device registration to be done earlier, directly in nsim_newlink(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:41 +02:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: create devlink instance per netdevsim instance Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:42 +02:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: move shared dev creation and destruction into separate file To make code easier to read, move shared dev bits into a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 14:49:26 +02:00
netdevsim: move netdev creation/destruction to dev probe Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:55 +02:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: move shared dev creation and destruction into separate file To make code easier to read, move shared dev bits into a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 14:49:26 +02:00
netdevsim: change debugfs tree topology With the model where dev is represented by devlink and ports are represented by devlink ports, make debugfs file names independent on netdev names. Change the topology to the one illustrated by the following example: $ ls /sys/kernel/debug/netdevsim/ netdevsim1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/ 0 1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:52 +02:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: put netdevsim bus code into separate file As the code related to netdevsim bus is going to get bigger, move the existing code to a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:44 +02:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: put netdevsim bus code into separate file As the code related to netdevsim bus is going to get bigger, move the existing code to a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:44 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: put netdevsim bus code into separate file As the code related to netdevsim bus is going to get bigger, move the existing code to a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:44 +02:00
netdevsim: merge sdev into dev As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:50 +02:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00