linux/arch/arm/lib/getuser.S

167 lines
3.4 KiB

ARM: 8091/2: add get_user() support for 8 byte types Recent contributions, including to DRM and binder, introduce 64-bit values in their interfaces. A common motivation for this is to allow the same ABI for 32- and 64-bit userspaces (and therefore also a shared ABI for 32/64 hybrid userspaces). Anyhow, the developers would like to avoid gotchas like having to use copy_from_user(). This feature is already implemented on x86-32 and the majority of other 32-bit architectures. The current list of get_user_8 hold out architectures are: arm, avr32, blackfin, m32r, metag, microblaze, mn10300, sh. Credit: My name sits rather uneasily at the top of this patch. The v1 and v2 versions of the patch were written by Rob Clark and to produce v4 I mostly copied code from Russell King and H. Peter Anvin. However I have mangled the patch sufficiently that *blame* is rightfully mine even if credit should more widely shared. Changelog: v5: updated to use the ret macro (requested by Russell King) v4: remove an inlined add on big endian systems (spotted by Russell King), used __ARMEB__ rather than BIG_ENDIAN (to match rest of file), cleared r3 on EFAULT during __get_user_8. v3: fix a couple of checkpatch issues v2: pass correct size to check_uaccess, and better handling of narrowing double word read with __get_user_xb() (Russell King's suggestion) v1: original Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-10 20:58:08 +01:00
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 16:29:12 +01:00
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 16:29:12 +01:00
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 16:29:12 +01:00
ARM: 8091/2: add get_user() support for 8 byte types Recent contributions, including to DRM and binder, introduce 64-bit values in their interfaces. A common motivation for this is to allow the same ABI for 32- and 64-bit userspaces (and therefore also a shared ABI for 32/64 hybrid userspaces). Anyhow, the developers would like to avoid gotchas like having to use copy_from_user(). This feature is already implemented on x86-32 and the majority of other 32-bit architectures. The current list of get_user_8 hold out architectures are: arm, avr32, blackfin, m32r, metag, microblaze, mn10300, sh. Credit: My name sits rather uneasily at the top of this patch. The v1 and v2 versions of the patch were written by Rob Clark and to produce v4 I mostly copied code from Russell King and H. Peter Anvin. However I have mangled the patch sufficiently that *blame* is rightfully mine even if credit should more widely shared. Changelog: v5: updated to use the ret macro (requested by Russell King) v4: remove an inlined add on big endian systems (spotted by Russell King), used __ARMEB__ rather than BIG_ENDIAN (to match rest of file), cleared r3 on EFAULT during __get_user_8. v3: fix a couple of checkpatch issues v2: pass correct size to check_uaccess, and better handling of narrowing double word read with __get_user_xb() (Russell King's suggestion) v1: original Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-10 20:58:08 +01:00
ARM: 8091/2: add get_user() support for 8 byte types Recent contributions, including to DRM and binder, introduce 64-bit values in their interfaces. A common motivation for this is to allow the same ABI for 32- and 64-bit userspaces (and therefore also a shared ABI for 32/64 hybrid userspaces). Anyhow, the developers would like to avoid gotchas like having to use copy_from_user(). This feature is already implemented on x86-32 and the majority of other 32-bit architectures. The current list of get_user_8 hold out architectures are: arm, avr32, blackfin, m32r, metag, microblaze, mn10300, sh. Credit: My name sits rather uneasily at the top of this patch. The v1 and v2 versions of the patch were written by Rob Clark and to produce v4 I mostly copied code from Russell King and H. Peter Anvin. However I have mangled the patch sufficiently that *blame* is rightfully mine even if credit should more widely shared. Changelog: v5: updated to use the ret macro (requested by Russell King) v4: remove an inlined add on big endian systems (spotted by Russell King), used __ARMEB__ rather than BIG_ENDIAN (to match rest of file), cleared r3 on EFAULT during __get_user_8. v3: fix a couple of checkpatch issues v2: pass correct size to check_uaccess, and better handling of narrowing double word read with __get_user_xb() (Russell King's suggestion) v1: original Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-10 20:58:08 +01:00
ARM: 8091/2: add get_user() support for 8 byte types Recent contributions, including to DRM and binder, introduce 64-bit values in their interfaces. A common motivation for this is to allow the same ABI for 32- and 64-bit userspaces (and therefore also a shared ABI for 32/64 hybrid userspaces). Anyhow, the developers would like to avoid gotchas like having to use copy_from_user(). This feature is already implemented on x86-32 and the majority of other 32-bit architectures. The current list of get_user_8 hold out architectures are: arm, avr32, blackfin, m32r, metag, microblaze, mn10300, sh. Credit: My name sits rather uneasily at the top of this patch. The v1 and v2 versions of the patch were written by Rob Clark and to produce v4 I mostly copied code from Russell King and H. Peter Anvin. However I have mangled the patch sufficiently that *blame* is rightfully mine even if credit should more widely shared. Changelog: v5: updated to use the ret macro (requested by Russell King) v4: remove an inlined add on big endian systems (spotted by Russell King), used __ARMEB__ rather than BIG_ENDIAN (to match rest of file), cleared r3 on EFAULT during __get_user_8. v3: fix a couple of checkpatch issues v2: pass correct size to check_uaccess, and better handling of narrowing double word read with __get_user_xb() (Russell King's suggestion) v1: original Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-10 20:58:08 +01:00
2014-09-04 06:07:33 +01:00
ARM: 8091/2: add get_user() support for 8 byte types Recent contributions, including to DRM and binder, introduce 64-bit values in their interfaces. A common motivation for this is to allow the same ABI for 32- and 64-bit userspaces (and therefore also a shared ABI for 32/64 hybrid userspaces). Anyhow, the developers would like to avoid gotchas like having to use copy_from_user(). This feature is already implemented on x86-32 and the majority of other 32-bit architectures. The current list of get_user_8 hold out architectures are: arm, avr32, blackfin, m32r, metag, microblaze, mn10300, sh. Credit: My name sits rather uneasily at the top of this patch. The v1 and v2 versions of the patch were written by Rob Clark and to produce v4 I mostly copied code from Russell King and H. Peter Anvin. However I have mangled the patch sufficiently that *blame* is rightfully mine even if credit should more widely shared. Changelog: v5: updated to use the ret macro (requested by Russell King) v4: remove an inlined add on big endian systems (spotted by Russell King), used __ARMEB__ rather than BIG_ENDIAN (to match rest of file), cleared r3 on EFAULT during __get_user_8. v3: fix a couple of checkpatch issues v2: pass correct size to check_uaccess, and better handling of narrowing double word read with __get_user_xb() (Russell King's suggestion) v1: original Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-10 20:58:08 +01:00
2014-09-04 06:07:33 +01:00
2014-09-04 06:07:33 +01:00
2014-09-04 06:07:33 +01:00
2014-09-04 06:07:33 +01:00
ARM: 8091/2: add get_user() support for 8 byte types Recent contributions, including to DRM and binder, introduce 64-bit values in their interfaces. A common motivation for this is to allow the same ABI for 32- and 64-bit userspaces (and therefore also a shared ABI for 32/64 hybrid userspaces). Anyhow, the developers would like to avoid gotchas like having to use copy_from_user(). This feature is already implemented on x86-32 and the majority of other 32-bit architectures. The current list of get_user_8 hold out architectures are: arm, avr32, blackfin, m32r, metag, microblaze, mn10300, sh. Credit: My name sits rather uneasily at the top of this patch. The v1 and v2 versions of the patch were written by Rob Clark and to produce v4 I mostly copied code from Russell King and H. Peter Anvin. However I have mangled the patch sufficiently that *blame* is rightfully mine even if credit should more widely shared. Changelog: v5: updated to use the ret macro (requested by Russell King) v4: remove an inlined add on big endian systems (spotted by Russell King), used __ARMEB__ rather than BIG_ENDIAN (to match rest of file), cleared r3 on EFAULT during __get_user_8. v3: fix a couple of checkpatch issues v2: pass correct size to check_uaccess, and better handling of narrowing double word read with __get_user_xb() (Russell King's suggestion) v1: original Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-10 20:58:08 +01:00
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 16:29:12 +01:00
ARM: 8091/2: add get_user() support for 8 byte types Recent contributions, including to DRM and binder, introduce 64-bit values in their interfaces. A common motivation for this is to allow the same ABI for 32- and 64-bit userspaces (and therefore also a shared ABI for 32/64 hybrid userspaces). Anyhow, the developers would like to avoid gotchas like having to use copy_from_user(). This feature is already implemented on x86-32 and the majority of other 32-bit architectures. The current list of get_user_8 hold out architectures are: arm, avr32, blackfin, m32r, metag, microblaze, mn10300, sh. Credit: My name sits rather uneasily at the top of this patch. The v1 and v2 versions of the patch were written by Rob Clark and to produce v4 I mostly copied code from Russell King and H. Peter Anvin. However I have mangled the patch sufficiently that *blame* is rightfully mine even if credit should more widely shared. Changelog: v5: updated to use the ret macro (requested by Russell King) v4: remove an inlined add on big endian systems (spotted by Russell King), used __ARMEB__ rather than BIG_ENDIAN (to match rest of file), cleared r3 on EFAULT during __get_user_8. v3: fix a couple of checkpatch issues v2: pass correct size to check_uaccess, and better handling of narrowing double word read with __get_user_xb() (Russell King's suggestion) v1: original Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-10 20:58:08 +01:00
ARM: 8091/2: add get_user() support for 8 byte types Recent contributions, including to DRM and binder, introduce 64-bit values in their interfaces. A common motivation for this is to allow the same ABI for 32- and 64-bit userspaces (and therefore also a shared ABI for 32/64 hybrid userspaces). Anyhow, the developers would like to avoid gotchas like having to use copy_from_user(). This feature is already implemented on x86-32 and the majority of other 32-bit architectures. The current list of get_user_8 hold out architectures are: arm, avr32, blackfin, m32r, metag, microblaze, mn10300, sh. Credit: My name sits rather uneasily at the top of this patch. The v1 and v2 versions of the patch were written by Rob Clark and to produce v4 I mostly copied code from Russell King and H. Peter Anvin. However I have mangled the patch sufficiently that *blame* is rightfully mine even if credit should more widely shared. Changelog: v5: updated to use the ret macro (requested by Russell King) v4: remove an inlined add on big endian systems (spotted by Russell King), used __ARMEB__ rather than BIG_ENDIAN (to match rest of file), cleared r3 on EFAULT during __get_user_8. v3: fix a couple of checkpatch issues v2: pass correct size to check_uaccess, and better handling of narrowing double word read with __get_user_xb() (Russell King's suggestion) v1: original Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-10 20:58:08 +01:00
2014-09-04 06:07:33 +01:00
ARM: 8091/2: add get_user() support for 8 byte types Recent contributions, including to DRM and binder, introduce 64-bit values in their interfaces. A common motivation for this is to allow the same ABI for 32- and 64-bit userspaces (and therefore also a shared ABI for 32/64 hybrid userspaces). Anyhow, the developers would like to avoid gotchas like having to use copy_from_user(). This feature is already implemented on x86-32 and the majority of other 32-bit architectures. The current list of get_user_8 hold out architectures are: arm, avr32, blackfin, m32r, metag, microblaze, mn10300, sh. Credit: My name sits rather uneasily at the top of this patch. The v1 and v2 versions of the patch were written by Rob Clark and to produce v4 I mostly copied code from Russell King and H. Peter Anvin. However I have mangled the patch sufficiently that *blame* is rightfully mine even if credit should more widely shared. Changelog: v5: updated to use the ret macro (requested by Russell King) v4: remove an inlined add on big endian systems (spotted by Russell King), used __ARMEB__ rather than BIG_ENDIAN (to match rest of file), cleared r3 on EFAULT during __get_user_8. v3: fix a couple of checkpatch issues v2: pass correct size to check_uaccess, and better handling of narrowing double word read with __get_user_xb() (Russell King's suggestion) v1: original Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-10 20:58:08 +01:00