linux/drivers/gpu/drm/drm_gem.c

1561 lines
41 KiB

dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-04 09:05:41 -08:00
drm/gem: fix up flink name create race This is the 2nd attempt, I've always been a bit dissatisified with the tricky nature of the first one: http://lists.freedesktop.org/archives/dri-devel/2012-July/025451.html The issue is that the flink ioctl can race with calling gem_close on the last gem handle. In that case we'll end up with a zero handle count, but an flink name (and it's corresponding reference). Which results in a neat space leak. In my first attempt I've solved this by rechecking the handle count. But fundamentally the issue is that ->handle_count isn't your usual refcount - it can be resurrected from 0 among other things. For those special beasts atomic_t often suggest way more ordering that it actually guarantees. To prevent being tricked by those hairy semantics take the easy way out and simply protect the handle with the existing dev->object_name_lock. With that change implemented it's dead easy to fix the flink vs. gem close reace: When we try to create the name we simply have to check whether there's still officially a gem handle around and if not refuse to create the flink name. Since the handle count decrement and flink name destruction is now also protected by that lock the reace is gone and we can't ever leak the flink reference again. Outside of the drm core only the exynos driver looks at the handle count, and tbh I have no idea why (it's just for debug dmesg output luckily). I've considered inlining the drm_gem_object_handle_free, but I plan to add more name-like things (like the exported dma_buf) to this scheme, so it's clearer to leave the handle freeing in its own function. This is exercised by the new gem_flink_race i-g-t testcase, which on my snb leaks gem objects at a rate of roughly 1k objects/s. v2: Fix up the error path handling in handle_create and make it more robust by simply calling object_handle_unreference. v3: Fix up the handle_unreference logic bug - atomic_dec_and_test retursn 1 for 0. Oops. v4: Squash in inlining of drm_gem_object_handle_reference as suggested by Dave Airlie and add a note that we now have a testcase. Cc: Dave Airlie <airlied@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:37 +02:00
drm/gem: fix up flink name create race This is the 2nd attempt, I've always been a bit dissatisified with the tricky nature of the first one: http://lists.freedesktop.org/archives/dri-devel/2012-July/025451.html The issue is that the flink ioctl can race with calling gem_close on the last gem handle. In that case we'll end up with a zero handle count, but an flink name (and it's corresponding reference). Which results in a neat space leak. In my first attempt I've solved this by rechecking the handle count. But fundamentally the issue is that ->handle_count isn't your usual refcount - it can be resurrected from 0 among other things. For those special beasts atomic_t often suggest way more ordering that it actually guarantees. To prevent being tricked by those hairy semantics take the easy way out and simply protect the handle with the existing dev->object_name_lock. With that change implemented it's dead easy to fix the flink vs. gem close reace: When we try to create the name we simply have to check whether there's still officially a gem handle around and if not refuse to create the flink name. Since the handle count decrement and flink name destruction is now also protected by that lock the reace is gone and we can't ever leak the flink reference again. Outside of the drm core only the exynos driver looks at the handle count, and tbh I have no idea why (it's just for debug dmesg output luckily). I've considered inlining the drm_gem_object_handle_free, but I plan to add more name-like things (like the exported dma_buf) to this scheme, so it's clearer to leave the handle freeing in its own function. This is exercised by the new gem_flink_race i-g-t testcase, which on my snb leaks gem objects at a rate of roughly 1k objects/s. v2: Fix up the error path handling in handle_create and make it more robust by simply calling object_handle_unreference. v3: Fix up the handle_unreference logic bug - atomic_dec_and_test retursn 1 for 0. Oops. v4: Squash in inlining of drm_gem_object_handle_reference as suggested by Dave Airlie and add a note that we now have a testcase. Cc: Dave Airlie <airlied@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:37 +02:00
drm/prime: proper locking+refcounting for obj->dma_buf link The export dma-buf cache is semantically similar to an flink name. So semantically it makes sense to treat it the same and remove the name (i.e. the dma_buf pointer) and its references when the last gem handle disappears. Again we need to be careful, but double so: Not just could someone race and export with a gem close ioctl (so we need to recheck obj->handle_count again when assigning the new name), but multiple exports can also race against each another. This is prevented by holding the dev->object_name_lock across the entire section which touches obj->dma_buf. With the new scheme we also need to reinstate the obj->dma_buf link at import time (in case the only reference userspace has held in-between was through the dma-buf fd and not through any native gem handle). For simplicity we don't check whether it's a native object but unconditionally set up that link - with the new scheme of removing the obj->dma_buf reference when the last handle disappears we can do that. To make it clear that this is not just for exported buffers anymore als rename it from export_dma_buf to dma_buf. To make sure that now one can race a fd_to_handle or handle_to_fd with gem_close we use the same tricks as in flink of extending the dev->object_name_locking critical section. With this change we finally have a guaranteed 1:1 relationship (at least for native objects) between gem objects and dma-bufs, even accounting for races (which can happen since the dma-buf itself holds a reference while in-flight). This prevent igt/prime_self_import/export-vs-gem_close-race from Oopsing the kernel. There is still a leak though since the per-file priv dma-buf/handle cache handling is racy. That will be fixed in a later patch. v2: Remove the bogus dma_buf_put from the export_and_register_object failure path if we've raced with the handle count dropping to 0. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:46 +02:00
drm/prime: proper locking+refcounting for obj->dma_buf link The export dma-buf cache is semantically similar to an flink name. So semantically it makes sense to treat it the same and remove the name (i.e. the dma_buf pointer) and its references when the last gem handle disappears. Again we need to be careful, but double so: Not just could someone race and export with a gem close ioctl (so we need to recheck obj->handle_count again when assigning the new name), but multiple exports can also race against each another. This is prevented by holding the dev->object_name_lock across the entire section which touches obj->dma_buf. With the new scheme we also need to reinstate the obj->dma_buf link at import time (in case the only reference userspace has held in-between was through the dma-buf fd and not through any native gem handle). For simplicity we don't check whether it's a native object but unconditionally set up that link - with the new scheme of removing the obj->dma_buf reference when the last handle disappears we can do that. To make it clear that this is not just for exported buffers anymore als rename it from export_dma_buf to dma_buf. To make sure that now one can race a fd_to_handle or handle_to_fd with gem_close we use the same tricks as in flink of extending the dev->object_name_locking critical section. With this change we finally have a guaranteed 1:1 relationship (at least for native objects) between gem objects and dma-bufs, even accounting for races (which can happen since the dma-buf itself holds a reference while in-flight). This prevent igt/prime_self_import/export-vs-gem_close-race from Oopsing the kernel. There is still a leak though since the per-file priv dma-buf/handle cache handling is racy. That will be fixed in a later patch. v2: Remove the bogus dma_buf_put from the export_and_register_object failure path if we've raced with the handle count dropping to 0. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:46 +02:00
drm/prime: proper locking+refcounting for obj->dma_buf link The export dma-buf cache is semantically similar to an flink name. So semantically it makes sense to treat it the same and remove the name (i.e. the dma_buf pointer) and its references when the last gem handle disappears. Again we need to be careful, but double so: Not just could someone race and export with a gem close ioctl (so we need to recheck obj->handle_count again when assigning the new name), but multiple exports can also race against each another. This is prevented by holding the dev->object_name_lock across the entire section which touches obj->dma_buf. With the new scheme we also need to reinstate the obj->dma_buf link at import time (in case the only reference userspace has held in-between was through the dma-buf fd and not through any native gem handle). For simplicity we don't check whether it's a native object but unconditionally set up that link - with the new scheme of removing the obj->dma_buf reference when the last handle disappears we can do that. To make it clear that this is not just for exported buffers anymore als rename it from export_dma_buf to dma_buf. To make sure that now one can race a fd_to_handle or handle_to_fd with gem_close we use the same tricks as in flink of extending the dev->object_name_locking critical section. With this change we finally have a guaranteed 1:1 relationship (at least for native objects) between gem objects and dma-bufs, even accounting for races (which can happen since the dma-buf itself holds a reference while in-flight). This prevent igt/prime_self_import/export-vs-gem_close-race from Oopsing the kernel. There is still a leak though since the per-file priv dma-buf/handle cache handling is racy. That will be fixed in a later patch. v2: Remove the bogus dma_buf_put from the export_and_register_object failure path if we've raced with the handle count dropping to 0. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:46 +02:00
drm/prime: proper locking+refcounting for obj->dma_buf link The export dma-buf cache is semantically similar to an flink name. So semantically it makes sense to treat it the same and remove the name (i.e. the dma_buf pointer) and its references when the last gem handle disappears. Again we need to be careful, but double so: Not just could someone race and export with a gem close ioctl (so we need to recheck obj->handle_count again when assigning the new name), but multiple exports can also race against each another. This is prevented by holding the dev->object_name_lock across the entire section which touches obj->dma_buf. With the new scheme we also need to reinstate the obj->dma_buf link at import time (in case the only reference userspace has held in-between was through the dma-buf fd and not through any native gem handle). For simplicity we don't check whether it's a native object but unconditionally set up that link - with the new scheme of removing the obj->dma_buf reference when the last handle disappears we can do that. To make it clear that this is not just for exported buffers anymore als rename it from export_dma_buf to dma_buf. To make sure that now one can race a fd_to_handle or handle_to_fd with gem_close we use the same tricks as in flink of extending the dev->object_name_locking critical section. With this change we finally have a guaranteed 1:1 relationship (at least for native objects) between gem objects and dma-bufs, even accounting for races (which can happen since the dma-buf itself holds a reference while in-flight). This prevent igt/prime_self_import/export-vs-gem_close-race from Oopsing the kernel. There is still a leak though since the per-file priv dma-buf/handle cache handling is racy. That will be fixed in a later patch. v2: Remove the bogus dma_buf_put from the export_and_register_object failure path if we've raced with the handle count dropping to 0. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:46 +02:00
drm/gem: fix up flink name create race This is the 2nd attempt, I've always been a bit dissatisified with the tricky nature of the first one: http://lists.freedesktop.org/archives/dri-devel/2012-July/025451.html The issue is that the flink ioctl can race with calling gem_close on the last gem handle. In that case we'll end up with a zero handle count, but an flink name (and it's corresponding reference). Which results in a neat space leak. In my first attempt I've solved this by rechecking the handle count. But fundamentally the issue is that ->handle_count isn't your usual refcount - it can be resurrected from 0 among other things. For those special beasts atomic_t often suggest way more ordering that it actually guarantees. To prevent being tricked by those hairy semantics take the easy way out and simply protect the handle with the existing dev->object_name_lock. With that change implemented it's dead easy to fix the flink vs. gem close reace: When we try to create the name we simply have to check whether there's still officially a gem handle around and if not refuse to create the flink name. Since the handle count decrement and flink name destruction is now also protected by that lock the reace is gone and we can't ever leak the flink reference again. Outside of the drm core only the exynos driver looks at the handle count, and tbh I have no idea why (it's just for debug dmesg output luckily). I've considered inlining the drm_gem_object_handle_free, but I plan to add more name-like things (like the exported dma_buf) to this scheme, so it's clearer to leave the handle freeing in its own function. This is exercised by the new gem_flink_race i-g-t testcase, which on my snb leaks gem objects at a rate of roughly 1k objects/s. v2: Fix up the error path handling in handle_create and make it more robust by simply calling object_handle_unreference. v3: Fix up the handle_unreference logic bug - atomic_dec_and_test retursn 1 for 0. Oops. v4: Squash in inlining of drm_gem_object_handle_reference as suggested by Dave Airlie and add a note that we now have a testcase. Cc: Dave Airlie <airlied@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:37 +02:00
drm: Release driver references to handle before making it available again When userspace closes a handle, we remove it from the file->object_idr and then tell the driver to drop its references to that file/handle. However, as the file/handle is already available again for reuse, it may be reallocated back to userspace and active on a new object before the driver has had a chance to drop the old file/handle references. Whilst calling back into the driver, we have to drop the file->table_lock spinlock and so to prevent reusing the closed handle we mark that handle as stale in the idr, perform the callback and then remove the handle. We set the stale handle to point to the NULL object, then any idr_find() whilst the driver is removing the handle will return NULL, just as if the handle is already removed from idr. Note: This will be used to have a direct handle -> vma lookup table, instead of first a handle -> obj lookup, and then an (obj, vm) -> vma lookup. v2: Use NULL rather than an ERR_PTR to avoid having to adjust callers. idr_alloc() tracks existing handles using an internal bitmap, so we are free to use the NULL object as our stale identifier. v3: Needed to update the return value check after changing from using the stale error pointer to NULL. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com> [danvet: Add note about the use-case.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460721308-32405-1-git-send-email-chris@chris-wilson.co.uk
2016-04-15 12:55:08 +01:00
drm: Release driver references to handle before making it available again When userspace closes a handle, we remove it from the file->object_idr and then tell the driver to drop its references to that file/handle. However, as the file/handle is already available again for reuse, it may be reallocated back to userspace and active on a new object before the driver has had a chance to drop the old file/handle references. Whilst calling back into the driver, we have to drop the file->table_lock spinlock and so to prevent reusing the closed handle we mark that handle as stale in the idr, perform the callback and then remove the handle. We set the stale handle to point to the NULL object, then any idr_find() whilst the driver is removing the handle will return NULL, just as if the handle is already removed from idr. Note: This will be used to have a direct handle -> vma lookup table, instead of first a handle -> obj lookup, and then an (obj, vm) -> vma lookup. v2: Use NULL rather than an ERR_PTR to avoid having to adjust callers. idr_alloc() tracks existing handles using an internal bitmap, so we are free to use the NULL object as our stale identifier. v3: Needed to update the return value check after changing from using the stale error pointer to NULL. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com> [danvet: Add note about the use-case.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460721308-32405-1-git-send-email-chris@chris-wilson.co.uk
2016-04-15 12:55:08 +01:00
drm/gem: completely close gem_open vs. gem_close races The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:45 +02:00
drm/gem: completely close gem_open vs. gem_close races The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:45 +02:00
drm/gem: completely close gem_open vs. gem_close races The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:45 +02:00
drm/gem: completely close gem_open vs. gem_close races The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:45 +02:00
drm/gem: completely close gem_open vs. gem_close races The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:45 +02:00
drm/gem: completely close gem_open vs. gem_close races The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:45 +02:00
drm/gem: completely close gem_open vs. gem_close races The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:45 +02:00
drm/gem: fix up flink name create race This is the 2nd attempt, I've always been a bit dissatisified with the tricky nature of the first one: http://lists.freedesktop.org/archives/dri-devel/2012-July/025451.html The issue is that the flink ioctl can race with calling gem_close on the last gem handle. In that case we'll end up with a zero handle count, but an flink name (and it's corresponding reference). Which results in a neat space leak. In my first attempt I've solved this by rechecking the handle count. But fundamentally the issue is that ->handle_count isn't your usual refcount - it can be resurrected from 0 among other things. For those special beasts atomic_t often suggest way more ordering that it actually guarantees. To prevent being tricked by those hairy semantics take the easy way out and simply protect the handle with the existing dev->object_name_lock. With that change implemented it's dead easy to fix the flink vs. gem close reace: When we try to create the name we simply have to check whether there's still officially a gem handle around and if not refuse to create the flink name. Since the handle count decrement and flink name destruction is now also protected by that lock the reace is gone and we can't ever leak the flink reference again. Outside of the drm core only the exynos driver looks at the handle count, and tbh I have no idea why (it's just for debug dmesg output luckily). I've considered inlining the drm_gem_object_handle_free, but I plan to add more name-like things (like the exported dma_buf) to this scheme, so it's clearer to leave the handle freeing in its own function. This is exercised by the new gem_flink_race i-g-t testcase, which on my snb leaks gem objects at a rate of roughly 1k objects/s. v2: Fix up the error path handling in handle_create and make it more robust by simply calling object_handle_unreference. v3: Fix up the handle_unreference logic bug - atomic_dec_and_test retursn 1 for 0. Oops. v4: Squash in inlining of drm_gem_object_handle_reference as suggested by Dave Airlie and add a note that we now have a testcase. Cc: Dave Airlie <airlied@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:37 +02:00
drm/gem: completely close gem_open vs. gem_close races The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:45 +02:00
drm/gem: completely close gem_open vs. gem_close races The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:45 +02:00
drm/gem: completely close gem_open vs. gem_close races The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:45 +02:00
drm/gem: completely close gem_open vs. gem_close races The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-15 00:02:45 +02:00
drm/shme-helpers: Fix dma_buf_mmap forwarding bug When we forward an mmap to the dma_buf exporter, they get to own everything. Unfortunately drm_gem_mmap_obj() overwrote vma->vm_private_data after the driver callback, wreaking the exporter complete. This was noticed because vb2_common_vm_close blew up on mali gpu with panfrost after commit 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf"). Unfortunately drm_gem_mmap_obj also acquires a surplus reference that we need to drop in shmem helpers, which is a bit of a mislayer situation. Maybe the entire dma_buf_mmap forwarding should be pulled into core gem code. Note that the only two other drivers which forward mmap in their own code (etnaviv and exynos) get this somewhat right by overwriting the gem mmap code. But they seem to still have the leak. This might be a good excuse to move these drivers over to shmem helpers completely. Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Christian König <christian.koenig@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf") Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rob Herring <robh@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: <stable@vger.kernel.org> # v5.9+ Reported-and-tested-by: piotr.oniszczuk@gmail.com Cc: piotr.oniszczuk@gmail.com Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201027214922.3566743-1-daniel.vetter@ffwll.ch
2020-10-27 22:49:22 +01:00
drm/shme-helpers: Fix dma_buf_mmap forwarding bug When we forward an mmap to the dma_buf exporter, they get to own everything. Unfortunately drm_gem_mmap_obj() overwrote vma->vm_private_data after the driver callback, wreaking the exporter complete. This was noticed because vb2_common_vm_close blew up on mali gpu with panfrost after commit 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf"). Unfortunately drm_gem_mmap_obj also acquires a surplus reference that we need to drop in shmem helpers, which is a bit of a mislayer situation. Maybe the entire dma_buf_mmap forwarding should be pulled into core gem code. Note that the only two other drivers which forward mmap in their own code (etnaviv and exynos) get this somewhat right by overwriting the gem mmap code. But they seem to still have the leak. This might be a good excuse to move these drivers over to shmem helpers completely. Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Christian König <christian.koenig@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf") Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rob Herring <robh@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: <stable@vger.kernel.org> # v5.9+ Reported-and-tested-by: piotr.oniszczuk@gmail.com Cc: piotr.oniszczuk@gmail.com Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201027214922.3566743-1-daniel.vetter@ffwll.ch
2020-10-27 22:49:22 +01:00
mm: replace vma->vm_flags direct modifications with modifier calls Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 11:37:49 -08:00
dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-04 09:05:41 -08:00
dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-04 09:05:41 -08:00
dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-04 09:05:41 -08:00
dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-04 09:05:41 -08:00
dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-04 09:05:41 -08:00