linux/drivers/mmc/core/host.c

696 lines
18 KiB

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
mmc: sdio: Add API to manage SDIO IRQs from a workqueue For hosts not supporting MMC_CAP2_SDIO_IRQ_NOTHREAD but MMC_CAP_SDIO_IRQ, the SDIO IRQs are processed from a dedicated kernel thread. For these cases, the host calls mmc_signal_sdio_irq() from its ISR to signal a new SDIO IRQ. Signaling an SDIO IRQ makes the host's ->enable_sdio_irq() callback to be invoked to temporary disable the IRQs, before the kernel thread is woken up to process it. When processing of the IRQs are completed, they are re-enabled by the kernel thread, again via invoking the host's ->enable_sdio_irq(). The observation from this, is that the execution path is being unnecessary complex, as the host driver already knows that it needs to temporary disable the IRQs before signaling a new one. Moreover, replacing the kernel thread with a work/workqueue would not only greatly simplify the code, but also make it more robust. To address the above problems, let's continue to build upon the support for MMC_CAP2_SDIO_IRQ_NOTHREAD, as it already implements SDIO IRQs to be processed without using the clumsy kernel thread and without the ping-pong calls of the host's ->enable_sdio_irq() callback for each processed IRQ. Therefore, let's add new API sdio_signal_irq(), which enables hosts to signal/process SDIO IRQs by using a work/workqueue, rather than using the kernel thread. Add also a new host callback ->ack_sdio_irq(), which the work invokes when the SDIO IRQs have been processed. This informs the host about when it shall re-enable the SDIO IRQs. Potentially, we could re-use the existing ->enable_sdio_irq() callback instead of adding a new one, however it has turned out that it's more convenient for hosts to get this information via a separate callback. Hosts that wants to use this new method to signal/process SDIO IRQs, must enable MMC_CAP2_SDIO_IRQ_NOTHREAD and implement the ->ack_sdio_irq() callback. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2017-04-13 16:48:11 +02:00
mmc: core: Fix hanging on I/O during system suspend for removable cards The mmc core uses a PM notifier to temporarily during system suspend, turn off the card detection mechanism for removal/insertion of (e)MMC/SD/SDIO cards. Additionally, the notifier may be used to remove an SDIO card entirely, if a corresponding SDIO functional driver don't have the system suspend/resume callbacks assigned. This behaviour has been around for a very long time. However, a recent bug report tells us there are problems with this approach. More precisely, when receiving the PM_SUSPEND_PREPARE notification, we may end up hanging on I/O to be completed, thus also preventing the system from getting suspended. In the end what happens, is that the cancel_delayed_work_sync() in mmc_pm_notify() ends up waiting for mmc_rescan() to complete - and since mmc_rescan() wants to claim the host, it needs to wait for the I/O to be completed first. Typically, this problem is triggered in Android, if there is ongoing I/O while the user decides to suspend, resume and then suspend the system again. This due to that after the resume, an mmc_rescan() work gets punted to the workqueue, which job is to verify that the card remains inserted after the system has resumed. To fix this problem, userspace needs to become frozen to suspend the I/O, prior to turning off the card detection mechanism. Therefore, let's drop the PM notifiers for mmc subsystem altogether and rely on the card detection to be turned off/on as a part of the system_freezable_wq, that we are already using. Moreover, to allow and SDIO card to be removed during system suspend, let's manage this from a ->prepare() callback, assigned at the mmc_host_class level. In this way, we can use the parent device (the mmc_host_class device), to remove the card device that is the child, in the device_prepare() phase. Reported-by: Kiwoong Kim <kwmad.kim@samsung.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210310152900.149380-1-ulf.hansson@linaro.org Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com>
2021-03-10 16:29:00 +01:00
mmc: core: Don't allocate IDA for OF aliases There's a chance that the IDA allocated in mmc_alloc_host() is not freed for some time because it's freed as part of a class' release function (see mmc_host_classdev_release() where the IDA is freed). If another thread is holding a reference to the class, then only once all balancing device_put() calls (in turn calling kobject_put()) have been made will the IDA be released and usable again. Normally this isn't a problem because the kobject is released before anything else that may want to use the same number tries to again, but with CONFIG_DEBUG_KOBJECT_RELEASE=y and OF aliases it becomes pretty easy to try to allocate an alias from the IDA twice while the first time it was allocated is still pending a call to ida_simple_remove(). It's also possible to trigger it by using CONFIG_DEBUG_KOBJECT_RELEASE and probe defering a driver at boot that calls mmc_alloc_host() before trying to get resources that may defer likes clks or regulators. Instead of allocating from the IDA in this scenario, let's just skip it if we know this is an OF alias. The number is already "claimed" and devices that aren't using OF aliases won't try to use the claimed numbers anyway (see mmc_first_nonreserved_index()). This should avoid any issues with mmc_alloc_host() returning failures from the ida_simple_get() in the case that we're using an OF alias. Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Cc: Sujit Kautkar <sujitka@chromium.org> Reported-by: Zubin Mithra <zsm@chromium.org> Fixes: fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree alias") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210623075002.1746924-3-swboyd@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-23 00:50:02 -07:00
mmc: core: Fix hanging on I/O during system suspend for removable cards The mmc core uses a PM notifier to temporarily during system suspend, turn off the card detection mechanism for removal/insertion of (e)MMC/SD/SDIO cards. Additionally, the notifier may be used to remove an SDIO card entirely, if a corresponding SDIO functional driver don't have the system suspend/resume callbacks assigned. This behaviour has been around for a very long time. However, a recent bug report tells us there are problems with this approach. More precisely, when receiving the PM_SUSPEND_PREPARE notification, we may end up hanging on I/O to be completed, thus also preventing the system from getting suspended. In the end what happens, is that the cancel_delayed_work_sync() in mmc_pm_notify() ends up waiting for mmc_rescan() to complete - and since mmc_rescan() wants to claim the host, it needs to wait for the I/O to be completed first. Typically, this problem is triggered in Android, if there is ongoing I/O while the user decides to suspend, resume and then suspend the system again. This due to that after the resume, an mmc_rescan() work gets punted to the workqueue, which job is to verify that the card remains inserted after the system has resumed. To fix this problem, userspace needs to become frozen to suspend the I/O, prior to turning off the card detection mechanism. Therefore, let's drop the PM notifiers for mmc subsystem altogether and rely on the card detection to be turned off/on as a part of the system_freezable_wq, that we are already using. Moreover, to allow and SDIO card to be removed during system suspend, let's manage this from a ->prepare() callback, assigned at the mmc_host_class level. In this way, we can use the parent device (the mmc_host_class device), to remove the card device that is the child, in the device_prepare() phase. Reported-by: Kiwoong Kim <kwmad.kim@samsung.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210310152900.149380-1-ulf.hansson@linaro.org Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com>
2021-03-10 16:29:00 +01:00
mmc: core: Do not force a retune before RPMB switch Requesting a retune before switching to the RPMB partition has been observed to cause CRC errors on the RPMB reads (-EILSEQ). Since RPMB reads can not be retried, the clients would be directly affected by the errors. This commit disables the retune request prior to switching to the RPMB partition: mmc_retune_pause() no longer triggers a retune before the pause period begins. This was verified with the sdhci-of-arasan driver (ZynqMP) configured for HS200 using two separate eMMC cards (DG4064 and 064GB2). In both cases, the error was easy to reproduce triggering every few tenths of reads. With this commit, systems that were utilizing OP-TEE to access RPMB variables will experience an enhanced performance. Specifically, when OP-TEE is configured to employ RPMB as a secure storage solution, it not only writes the data but also the secure filesystem within the partition. As a result, retrieving any variable involves multiple RPMB reads, typically around five. For context, on ZynqMP, each retune request consumed approximately 8ms. Consequently, reading any RPMB variable used to take at the very minimum 40ms. After droping the need to retune before switching to the RPMB partition, this is no longer the case. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Avri Altman <avri.altman@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240103112911.2954632-1-jorge@foundries.io Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-03 12:29:11 +01:00
treewide: setup_timer() -> timer_setup() This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-16 14:43:17 -07:00
treewide: setup_timer() -> timer_setup() This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-16 14:43:17 -07:00
mmc: core: don't override the CD GPIO level when "cd-inverted" is set Since commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") gpiolib-of parses the "cd-gpios" property and flips the polarity if "cd-inverted" is also set. This results in the "cd-inverted" property being evaluated twice, which effectively makes it a no-op: - first in drivers/gpio/gpiolib-of.c (of_xlate_and_get_gpiod_flags) when setting up the CD GPIO - then again in drivers/mmc/core/slot-gpio.c (mmc_gpio_get_cd) when reading the CD GPIO value at runtime On boards which are using device-tree with the "cd-inverted" property being set any inserted card are not detected anymore. This is due to the MMC core treating the CD GPIO with the wrong polarity. Disable "override_cd_active_level" for the card detection GPIO which is parsed using mmc_of_parse. This fixes SD card detection on the boards which are currently using the "cd-inverted" device-tree property (tested on Meson8b Odroid-C1 and Meson8b EC-100). This does not remove the CD GPIO inversion logic from the MMC core because there's at least one driver (sdhci-pci-core for Intel BayTrail based boards) which still passes "override_cd_active_level = true" to mmc_gpiod_request_cd(). Due to lack of hardware for testing this is left untouched. In the future the GPIO inversion logic for both, card and read-only detection can be removed once no driver is using it anymore. Fixes: 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Tested-by: Loys Ollivier <loys.ollivier@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-01 20:44:14 +01:00
mmc: core: Allow setting slot index via device tree alias As with GPIO, UART and others, allow specifying the device index via the aliases node in the device tree. On embedded devices, there is often a combination of removable (e.g. SD card) and non-removable MMC devices (e.g. eMMC). Therefore the index might change depending on * host of removable device * removable card present or not This makes it difficult to hardcode the root device, if it is on the non-removable device. E.g. if SD card is present eMMC will be mmcblk1, if SD card is not present at boot, eMMC will be mmcblk0. Alternative solutions like PARTUUIDs do not cover the case where multiple mmcblk devices contain the same image. This is a common issue on devices that can boot both from eMMC (for regular boot) and SD cards (as a temporary boot medium for development). When a firmware image is installed to eMMC after a test boot via SD card, there will be no reliable way to refer to a specific device using (PART)UUIDs oder LABELs. The demand for this feature has led to multiple attempts to implement it, dating back at least to 2012 (see https://www.spinics.net/lists/linux-mmc/msg26586.html for a previous discussion from 2014). All indices defined in the aliases node will be reserved for use by the respective MMC device, moving the indices of devices that don't have an alias up into the non-reserved range. If the aliases node is not found, the driver will act as before. This is a rebased and cleaned up version of https://www.spinics.net/lists/linux-mmc/msg26588.html . Based-on-patch-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lkml.org/lkml/2020/8/5/194 Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20200901085004.2512-2-matthias.schiffer@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-01 10:50:04 +02:00
mmc: core: Don't allocate IDA for OF aliases There's a chance that the IDA allocated in mmc_alloc_host() is not freed for some time because it's freed as part of a class' release function (see mmc_host_classdev_release() where the IDA is freed). If another thread is holding a reference to the class, then only once all balancing device_put() calls (in turn calling kobject_put()) have been made will the IDA be released and usable again. Normally this isn't a problem because the kobject is released before anything else that may want to use the same number tries to again, but with CONFIG_DEBUG_KOBJECT_RELEASE=y and OF aliases it becomes pretty easy to try to allocate an alias from the IDA twice while the first time it was allocated is still pending a call to ida_simple_remove(). It's also possible to trigger it by using CONFIG_DEBUG_KOBJECT_RELEASE and probe defering a driver at boot that calls mmc_alloc_host() before trying to get resources that may defer likes clks or regulators. Instead of allocating from the IDA in this scenario, let's just skip it if we know this is an OF alias. The number is already "claimed" and devices that aren't using OF aliases won't try to use the claimed numbers anyway (see mmc_first_nonreserved_index()). This should avoid any issues with mmc_alloc_host() returning failures from the ida_simple_get() in the case that we're using an OF alias. Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Cc: Sujit Kautkar <sujitka@chromium.org> Reported-by: Zubin Mithra <zsm@chromium.org> Fixes: fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree alias") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210623075002.1746924-3-swboyd@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-23 00:50:02 -07:00
mmc: core: Allow setting slot index via device tree alias As with GPIO, UART and others, allow specifying the device index via the aliases node in the device tree. On embedded devices, there is often a combination of removable (e.g. SD card) and non-removable MMC devices (e.g. eMMC). Therefore the index might change depending on * host of removable device * removable card present or not This makes it difficult to hardcode the root device, if it is on the non-removable device. E.g. if SD card is present eMMC will be mmcblk1, if SD card is not present at boot, eMMC will be mmcblk0. Alternative solutions like PARTUUIDs do not cover the case where multiple mmcblk devices contain the same image. This is a common issue on devices that can boot both from eMMC (for regular boot) and SD cards (as a temporary boot medium for development). When a firmware image is installed to eMMC after a test boot via SD card, there will be no reliable way to refer to a specific device using (PART)UUIDs oder LABELs. The demand for this feature has led to multiple attempts to implement it, dating back at least to 2012 (see https://www.spinics.net/lists/linux-mmc/msg26586.html for a previous discussion from 2014). All indices defined in the aliases node will be reserved for use by the respective MMC device, moving the indices of devices that don't have an alias up into the non-reserved range. If the aliases node is not found, the driver will act as before. This is a rebased and cleaned up version of https://www.spinics.net/lists/linux-mmc/msg26588.html . Based-on-patch-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lkml.org/lkml/2020/8/5/194 Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20200901085004.2512-2-matthias.schiffer@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-01 10:50:04 +02:00
mmc: core: Allow setting slot index via device tree alias As with GPIO, UART and others, allow specifying the device index via the aliases node in the device tree. On embedded devices, there is often a combination of removable (e.g. SD card) and non-removable MMC devices (e.g. eMMC). Therefore the index might change depending on * host of removable device * removable card present or not This makes it difficult to hardcode the root device, if it is on the non-removable device. E.g. if SD card is present eMMC will be mmcblk1, if SD card is not present at boot, eMMC will be mmcblk0. Alternative solutions like PARTUUIDs do not cover the case where multiple mmcblk devices contain the same image. This is a common issue on devices that can boot both from eMMC (for regular boot) and SD cards (as a temporary boot medium for development). When a firmware image is installed to eMMC after a test boot via SD card, there will be no reliable way to refer to a specific device using (PART)UUIDs oder LABELs. The demand for this feature has led to multiple attempts to implement it, dating back at least to 2012 (see https://www.spinics.net/lists/linux-mmc/msg26586.html for a previous discussion from 2014). All indices defined in the aliases node will be reserved for use by the respective MMC device, moving the indices of devices that don't have an alias up into the non-reserved range. If the aliases node is not found, the driver will act as before. This is a rebased and cleaned up version of https://www.spinics.net/lists/linux-mmc/msg26588.html . Based-on-patch-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lkml.org/lkml/2020/8/5/194 Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20200901085004.2512-2-matthias.schiffer@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-01 10:50:04 +02:00
mmc: core: Don't allocate IDA for OF aliases There's a chance that the IDA allocated in mmc_alloc_host() is not freed for some time because it's freed as part of a class' release function (see mmc_host_classdev_release() where the IDA is freed). If another thread is holding a reference to the class, then only once all balancing device_put() calls (in turn calling kobject_put()) have been made will the IDA be released and usable again. Normally this isn't a problem because the kobject is released before anything else that may want to use the same number tries to again, but with CONFIG_DEBUG_KOBJECT_RELEASE=y and OF aliases it becomes pretty easy to try to allocate an alias from the IDA twice while the first time it was allocated is still pending a call to ida_simple_remove(). It's also possible to trigger it by using CONFIG_DEBUG_KOBJECT_RELEASE and probe defering a driver at boot that calls mmc_alloc_host() before trying to get resources that may defer likes clks or regulators. Instead of allocating from the IDA in this scenario, let's just skip it if we know this is an OF alias. The number is already "claimed" and devices that aren't using OF aliases won't try to use the claimed numbers anyway (see mmc_first_nonreserved_index()). This should avoid any issues with mmc_alloc_host() returning failures from the ida_simple_get() in the case that we're using an OF alias. Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Cc: Sujit Kautkar <sujitka@chromium.org> Reported-by: Zubin Mithra <zsm@chromium.org> Fixes: fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree alias") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210623075002.1746924-3-swboyd@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-23 00:50:02 -07:00
mmc: core: Allow setting slot index via device tree alias As with GPIO, UART and others, allow specifying the device index via the aliases node in the device tree. On embedded devices, there is often a combination of removable (e.g. SD card) and non-removable MMC devices (e.g. eMMC). Therefore the index might change depending on * host of removable device * removable card present or not This makes it difficult to hardcode the root device, if it is on the non-removable device. E.g. if SD card is present eMMC will be mmcblk1, if SD card is not present at boot, eMMC will be mmcblk0. Alternative solutions like PARTUUIDs do not cover the case where multiple mmcblk devices contain the same image. This is a common issue on devices that can boot both from eMMC (for regular boot) and SD cards (as a temporary boot medium for development). When a firmware image is installed to eMMC after a test boot via SD card, there will be no reliable way to refer to a specific device using (PART)UUIDs oder LABELs. The demand for this feature has led to multiple attempts to implement it, dating back at least to 2012 (see https://www.spinics.net/lists/linux-mmc/msg26586.html for a previous discussion from 2014). All indices defined in the aliases node will be reserved for use by the respective MMC device, moving the indices of devices that don't have an alias up into the non-reserved range. If the aliases node is not found, the driver will act as before. This is a rebased and cleaned up version of https://www.spinics.net/lists/linux-mmc/msg26588.html . Based-on-patch-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lkml.org/lkml/2020/8/5/194 Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20200901085004.2512-2-matthias.schiffer@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-01 10:50:04 +02:00
mmc: core: Don't allocate IDA for OF aliases There's a chance that the IDA allocated in mmc_alloc_host() is not freed for some time because it's freed as part of a class' release function (see mmc_host_classdev_release() where the IDA is freed). If another thread is holding a reference to the class, then only once all balancing device_put() calls (in turn calling kobject_put()) have been made will the IDA be released and usable again. Normally this isn't a problem because the kobject is released before anything else that may want to use the same number tries to again, but with CONFIG_DEBUG_KOBJECT_RELEASE=y and OF aliases it becomes pretty easy to try to allocate an alias from the IDA twice while the first time it was allocated is still pending a call to ida_simple_remove(). It's also possible to trigger it by using CONFIG_DEBUG_KOBJECT_RELEASE and probe defering a driver at boot that calls mmc_alloc_host() before trying to get resources that may defer likes clks or regulators. Instead of allocating from the IDA in this scenario, let's just skip it if we know this is an OF alias. The number is already "claimed" and devices that aren't using OF aliases won't try to use the claimed numbers anyway (see mmc_first_nonreserved_index()). This should avoid any issues with mmc_alloc_host() returning failures from the ida_simple_get() in the case that we're using an OF alias. Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Cc: Sujit Kautkar <sujitka@chromium.org> Reported-by: Zubin Mithra <zsm@chromium.org> Fixes: fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree alias") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210623075002.1746924-3-swboyd@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-23 00:50:02 -07:00
mmc: core: Don't allocate IDA for OF aliases There's a chance that the IDA allocated in mmc_alloc_host() is not freed for some time because it's freed as part of a class' release function (see mmc_host_classdev_release() where the IDA is freed). If another thread is holding a reference to the class, then only once all balancing device_put() calls (in turn calling kobject_put()) have been made will the IDA be released and usable again. Normally this isn't a problem because the kobject is released before anything else that may want to use the same number tries to again, but with CONFIG_DEBUG_KOBJECT_RELEASE=y and OF aliases it becomes pretty easy to try to allocate an alias from the IDA twice while the first time it was allocated is still pending a call to ida_simple_remove(). It's also possible to trigger it by using CONFIG_DEBUG_KOBJECT_RELEASE and probe defering a driver at boot that calls mmc_alloc_host() before trying to get resources that may defer likes clks or regulators. Instead of allocating from the IDA in this scenario, let's just skip it if we know this is an OF alias. The number is already "claimed" and devices that aren't using OF aliases won't try to use the claimed numbers anyway (see mmc_first_nonreserved_index()). This should avoid any issues with mmc_alloc_host() returning failures from the ida_simple_get() in the case that we're using an OF alias. Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Cc: Sujit Kautkar <sujitka@chromium.org> Reported-by: Zubin Mithra <zsm@chromium.org> Fixes: fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree alias") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210623075002.1746924-3-swboyd@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-23 00:50:02 -07:00
mmc: core: Allow setting slot index via device tree alias As with GPIO, UART and others, allow specifying the device index via the aliases node in the device tree. On embedded devices, there is often a combination of removable (e.g. SD card) and non-removable MMC devices (e.g. eMMC). Therefore the index might change depending on * host of removable device * removable card present or not This makes it difficult to hardcode the root device, if it is on the non-removable device. E.g. if SD card is present eMMC will be mmcblk1, if SD card is not present at boot, eMMC will be mmcblk0. Alternative solutions like PARTUUIDs do not cover the case where multiple mmcblk devices contain the same image. This is a common issue on devices that can boot both from eMMC (for regular boot) and SD cards (as a temporary boot medium for development). When a firmware image is installed to eMMC after a test boot via SD card, there will be no reliable way to refer to a specific device using (PART)UUIDs oder LABELs. The demand for this feature has led to multiple attempts to implement it, dating back at least to 2012 (see https://www.spinics.net/lists/linux-mmc/msg26586.html for a previous discussion from 2014). All indices defined in the aliases node will be reserved for use by the respective MMC device, moving the indices of devices that don't have an alias up into the non-reserved range. If the aliases node is not found, the driver will act as before. This is a rebased and cleaned up version of https://www.spinics.net/lists/linux-mmc/msg26588.html . Based-on-patch-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lkml.org/lkml/2020/8/5/194 Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20200901085004.2512-2-matthias.schiffer@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-01 10:50:04 +02:00
mmc: core: Don't allocate IDA for OF aliases There's a chance that the IDA allocated in mmc_alloc_host() is not freed for some time because it's freed as part of a class' release function (see mmc_host_classdev_release() where the IDA is freed). If another thread is holding a reference to the class, then only once all balancing device_put() calls (in turn calling kobject_put()) have been made will the IDA be released and usable again. Normally this isn't a problem because the kobject is released before anything else that may want to use the same number tries to again, but with CONFIG_DEBUG_KOBJECT_RELEASE=y and OF aliases it becomes pretty easy to try to allocate an alias from the IDA twice while the first time it was allocated is still pending a call to ida_simple_remove(). It's also possible to trigger it by using CONFIG_DEBUG_KOBJECT_RELEASE and probe defering a driver at boot that calls mmc_alloc_host() before trying to get resources that may defer likes clks or regulators. Instead of allocating from the IDA in this scenario, let's just skip it if we know this is an OF alias. The number is already "claimed" and devices that aren't using OF aliases won't try to use the claimed numbers anyway (see mmc_first_nonreserved_index()). This should avoid any issues with mmc_alloc_host() returning failures from the ida_simple_get() in the case that we're using an OF alias. Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Cc: Sujit Kautkar <sujitka@chromium.org> Reported-by: Zubin Mithra <zsm@chromium.org> Fixes: fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree alias") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210623075002.1746924-3-swboyd@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-23 00:50:02 -07:00
treewide: setup_timer() -> timer_setup() This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-16 14:43:17 -07:00
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
mmc: core: Cancel delayed work before releasing host On RZ/Five SMARC EVK, where probing of SDHI is deferred due to probe deferral of the vqmmc-supply regulator: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1738 __run_timers.part.0+0x1d0/0x1e8 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.7.0-rc4 #101 Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT) epc : __run_timers.part.0+0x1d0/0x1e8 ra : __run_timers.part.0+0x134/0x1e8 epc : ffffffff800771a4 ra : ffffffff80077108 sp : ffffffc800003e60 gp : ffffffff814f5028 tp : ffffffff8140c5c0 t0 : ffffffc800000000 t1 : 0000000000000001 t2 : ffffffff81201300 s0 : ffffffc800003f20 s1 : ffffffd8023bc4a0 a0 : 00000000fffee6b0 a1 : 0004010000400000 a2 : ffffffffc0000016 a3 : ffffffff81488640 a4 : ffffffc800003e60 a5 : 0000000000000000 a6 : 0000000004000000 a7 : ffffffc800003e68 s2 : 0000000000000122 s3 : 0000000000200000 s4 : 0000000000000000 s5 : ffffffffffffffff s6 : ffffffff81488678 s7 : ffffffff814886c0 s8 : ffffffff814f49c0 s9 : ffffffff81488640 s10: 0000000000000000 s11: ffffffc800003e60 t3 : 0000000000000240 t4 : 0000000000000a52 t5 : ffffffd8024ae018 t6 : ffffffd8024ae038 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [<ffffffff800771a4>] __run_timers.part.0+0x1d0/0x1e8 [<ffffffff800771e0>] run_timer_softirq+0x24/0x4a [<ffffffff80809092>] __do_softirq+0xc6/0x1fa [<ffffffff80028e4c>] irq_exit_rcu+0x66/0x84 [<ffffffff80800f7a>] handle_riscv_irq+0x40/0x4e [<ffffffff80808f48>] call_on_irq_stack+0x1c/0x28 ---[ end trace 0000000000000000 ]--- What happens? renesas_sdhi_probe() { tmio_mmc_host_alloc() mmc_alloc_host() INIT_DELAYED_WORK(&host->detect, mmc_rescan); devm_request_irq(tmio_mmc_irq); /* * After this, the interrupt handler may be invoked at any time * * tmio_mmc_irq() * { * __tmio_mmc_card_detect_irq() * mmc_detect_change() * _mmc_detect_change() * mmc_schedule_delayed_work(&host->detect, delay); * } */ tmio_mmc_host_probe() tmio_mmc_init_ocr() -EPROBE_DEFER tmio_mmc_host_free() mmc_free_host() } When expire_timers() runs later, it warns because the MMC host structure containing the delayed work was freed, and now contains an invalid work function pointer. Fix this by cancelling any pending delayed work before releasing the MMC host structure. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/205dc4c91b47e31b64392fe2498c7a449e717b4b.1701689330.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-04 12:29:53 +01:00