linux/sound/core/Kconfig

270 lines
7.6 KiB

ALSA: rawmidi: UMP support This patch adds the support helpers for UMP (Universal MIDI Packet) in ALSA core. The basic design is that a rawmidi instance is assigned to each UMP Endpoint. A UMP Endpoint provides a UMP stream, typically bidirectional (but can be also uni-directional, too), which may hold up to 16 UMP Groups, where each UMP (input/output) Group corresponds to the traditional MIDI I/O Endpoint. Additionally, the ALSA UMP abstraction provides the multiple UMP Blocks that can be assigned to each UMP Endpoint. A UMP Block is a metadata to hold the UMP Group clusters, and can represent the functions assigned to each UMP Group. A typical implementation of UMP Block is the Group Terminal Blocks of USB MIDI 2.0 specification. For distinguishing from the legacy byte-stream MIDI device, a new device "umpC*D*" will be created, instead of the standard (MIDI 1.0) devices "midiC*D*". The UMP instance can be identified by the new rawmidi info bit SNDRV_RAWMIDI_INFO_UMP, too. A UMP rawmidi device reads/writes only in 4-bytes words alignment, stored in CPU native endianness. The transmit and receive functions take care of the input/out data alignment, and may return zero or aligned size, and the params ioctl may return -EINVAL when the given input/output buffer size isn't aligned. A few new UMP-specific ioctls are added for obtaining the new UMP endpoint and block information. As of this commit, no ALSA sequencer instance is attached to UMP devices yet. They will be supported by later patches. Along with those changes, the protocol version for rawmidi is bumped to 2.0.3. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230523075358.9672-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-23 09:53:24 +02:00
ALSA: control: Use xarray for faster lookups The control elements are managed in a single linked list and we traverse the whole list for matching each numid or ctl id per every inquiry of a control element. This is OK-ish for a small number of elements but obviously it doesn't scale. Especially the matching with the ctl id takes time because it checks each field of the snd_ctl_id element, e.g. the name string is matched with strcmp(). This patch adds the hash tables with Xarray for improving the lookup speed of a control element. There are two xarray tables added to the card; one for numid and another for ctl id. For the numid, we use the numid as the index, while for the ctl id, we calculate a hash key. The lookup is done via a single xa_load() execution. As long as the given control element is found on the Xarray table, that's fine, we can give back a quick lookup result. The problem is when no entry hits on the table, and for this case, we have a slight optimization. Namely, the driver checks whether we had a collision on Xarray table, and do a fallback search (linear lookup of the full entries) only if a hash key collision happened beforehand. So, in theory, the inquiry for a non-existing element might take still time even with this patch in a worst case, but this must be pretty rare. The feature is enabled via CONFIG_SND_CTL_FAST_LOOKUP, which is turned on as default. For simplicity, the option can be turned off only when CONFIG_EXPERT is set ("You are expert? Then you manage 1000 knobs"). Link: https://lore.kernel.org/r/20211028130027.18764-1-tiwai@suse.de Link: https://lore.kernel.org/r/20220609180504.775-1-tiwai@suse.de Link: https://lore.kernel.org/all/cover.1653813866.git.quic_rbankapu@quicinc.com/ Link: https://lore.kernel.org/r/20220610064537.18660-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-06-10 08:45:37 +02:00
ALSA: control: Add verification for kctl accesses The current implementation of ALSA control API fully relies on the callbacks of each driver, and there is no verification of the values passed via API. This patch is an attempt to improve the situation slightly by adding the validation code for the values stored via info and get callbacks. The patch adds a new kconfig, CONFIG_SND_CTL_VALIDATION. It depends on CONFIG_SND_DEBUG and off as default since the validation would require a slight overhead including the additional call of info callback at each get callback invocation. When this config is enabled, the values stored by each info callback invocation are verified, namely: - Whether the info type is valid - Whether the number of enum items is non-zero - Whether the given info count is within the allowed boundary Similarly, the values stored at each get callback are verified as well: - Whether the values are within the given range - Whether the values are aligned with the given step - Whether any further changes are seen in the data array over the given info count The last point helps identifying a possibly invalid data type access, typically a case where the info callback declares the type being SNDRV_CTL_ELEM_TYPE_ENUMERATED while the get/put callbacks store the values in value.integer.value[] array. When a validation fails, the ALSA core logs an error message including the device and the control ID, and the API call also returns an error. So, with the new validation turned on, the driver behavior difference may be visible on user-space, too -- it's intentional, though, so that we can catch an error more clearly. The patch also introduces a new ctl access type, SNDRV_CTL_ELEM_ACCESS_SKIP_CHECK. A driver may pass this flag with other access bits to indicate that the ctl element won't be verified. It's useful when a driver code is specially written to access the data greater than info->count size by some reason. For example, this flag is actually set now in HD-audio HDMI codec driver which needs to clear the data array in the case of the disconnected monitor. Also, the PCM channel-map helper code is slightly modified to avoid the false-positive hit by this validation code, too. Link: https://lore.kernel.org/r/20200104083556.27789-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-04 09:35:56 +01:00
ALSA: control: Add verification for kctl accesses The current implementation of ALSA control API fully relies on the callbacks of each driver, and there is no verification of the values passed via API. This patch is an attempt to improve the situation slightly by adding the validation code for the values stored via info and get callbacks. The patch adds a new kconfig, CONFIG_SND_CTL_VALIDATION. It depends on CONFIG_SND_DEBUG and off as default since the validation would require a slight overhead including the additional call of info callback at each get callback invocation. When this config is enabled, the values stored by each info callback invocation are verified, namely: - Whether the info type is valid - Whether the number of enum items is non-zero - Whether the given info count is within the allowed boundary Similarly, the values stored at each get callback are verified as well: - Whether the values are within the given range - Whether the values are aligned with the given step - Whether any further changes are seen in the data array over the given info count The last point helps identifying a possibly invalid data type access, typically a case where the info callback declares the type being SNDRV_CTL_ELEM_TYPE_ENUMERATED while the get/put callbacks store the values in value.integer.value[] array. When a validation fails, the ALSA core logs an error message including the device and the control ID, and the API call also returns an error. So, with the new validation turned on, the driver behavior difference may be visible on user-space, too -- it's intentional, though, so that we can catch an error more clearly. The patch also introduces a new ctl access type, SNDRV_CTL_ELEM_ACCESS_SKIP_CHECK. A driver may pass this flag with other access bits to indicate that the ctl element won't be verified. It's useful when a driver code is specially written to access the data greater than info->count size by some reason. For example, this flag is actually set now in HD-audio HDMI codec driver which needs to clear the data array in the case of the disconnected monitor. Also, the PCM channel-map helper code is slightly modified to avoid the false-positive hit by this validation code, too. Link: https://lore.kernel.org/r/20200104083556.27789-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-04 09:35:56 +01:00
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 16:56:39 +08:00