kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/tools/testing/vsock/vsock_test.c

2116 lines
47 KiB
Raw Normal View History

VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
testing/vsock: add parameters to list and skip tests Some tests can fail with transports that have a slightly different behavior, so let's add the possibility to specify which tests to skip. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:06 +01:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
af_vsock: SOCK_SEQPACKET receive timeout test Test for receive timeout check: connection is established, receiver sets timeout, but sender does nothing. Receiver's 'read()' call must return EAGAIN. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:31:49 +00:00
af_vsock: SOCK_SEQPACKET broken buffer test Add test where sender sends two message, each with own data pattern. Reader tries to read first to broken buffer: it has three pages size, but middle page is unmapped. Then, reader tries to read second message to valid buffer. Test checks, that uncopied part of first message was dropped and thus not copied as part of second message. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:33:23 +00:00
vsock_test: POLLIN + SO_RCVLOWAT test This adds test to check, that when poll() returns POLLIN, POLLRDNORM bits, next read call won't block. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 05:43:50 +00:00
test/vsock: shutdowned socket test This adds two tests for 'shutdown()' call. It checks that SIGPIPE is sent when MSG_NOSIGNAL is not set and vice versa. Both flags SHUT_WR and SHUT_RD are tested. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-11 23:20:27 +03:00
test/vsock: add ioctl unsent bytes test Introduce two tests, one for SOCK_STREAM and one for SOCK_SEQPACKET, which use SIOCOUTQ ioctl to check that the number of unsent bytes is zero after delivering a packet. vsock_connect and vsock_accept are no longer static: this is to create more generic tests, allowing code to be reused for SEQPACKET and STREAM. Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-30 21:43:08 +02:00
vsock/test: Use NSEC_PER_SEC Replace 1000000000ULL with NSEC_PER_SEC. No functional change intended. Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-1-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:28 +01:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
test/vsock: MSG_ZEROCOPY flag tests This adds three tests for MSG_ZEROCOPY feature: 1) SOCK_STREAM tx with different buffers. 2) SOCK_SEQPACKET tx with different buffers. 3) SOCK_STREAM test to read empty error queue of the socket. Patch also works as preparation for the next patches for tools in this patchset: vsock_perf and vsock_uring_test: 1) Adds several new functions to util.c - they will be also used by vsock_uring_test. 2) Adds two new functions for MSG_ZEROCOPY handling to a new source file - such source will be shared between vsock_test, vsock_perf and vsock_uring_test, thus avoiding code copy-pasting. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-10 22:15:22 +03:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: Add test for accept_queue memory leak Attempt to enqueue a child after the queue was flushed, but before SOCK_DONE flag has been set. Test tries to produce a memory leak, kmemleak should be employed. Dealing with a race condition, test by its very nature may lead to a false negative. Fixed by commit d7b0ff5a8667 ("virtio/vsock: Fix accept_queue memory leak"). Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-5-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:32 +01:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
tools: testing: vsock: Test when server is bound but not listening Whenever the server side of vsock is binding to the socket, but not listening yet, we expect the behavior from the client to be identical to what happens when the server is not even started. This new test runs the server side so that it binds to the socket without ever listening to it. The client side will try to connect and should receive an ECONNRESET error. This new test provides a way to validate the previously introduced patch for making sure the server side will always answer with a RST packet in case the client requested a new connection. Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14 12:48:02 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
tools: testing: vsock: Test when server is bound but not listening Whenever the server side of vsock is binding to the socket, but not listening yet, we expect the behavior from the client to be identical to what happens when the server is not even started. This new test runs the server side so that it binds to the socket without ever listening to it. The client side will try to connect and should receive an ECONNRESET error. This new test provides a way to validate the previously introduced patch for making sure the server side will always answer with a RST packet in case the client requested a new connection. Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14 12:48:02 +01:00
vsock/test: Introduce vsock_bind() Add a helper for socket()+bind(). Adapt callers. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-3-1cf57065b770@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28 14:15:29 +01:00
tools: testing: vsock: Test when server is bound but not listening Whenever the server side of vsock is binding to the socket, but not listening yet, we expect the behavior from the client to be identical to what happens when the server is not even started. This new test runs the server side so that it binds to the socket without ever listening to it. The client side will try to connect and should receive an ECONNRESET error. This new test provides a way to validate the previously introduced patch for making sure the server side will always answer with a RST packet in case the client requested a new connection. Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14 12:48:02 +01:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock_test: wait for the remote to close the connection Before check if a send returns -EPIPE, we need to make sure the connection is closed. To do that, we use epoll API to wait EPOLLRDHUP or EPOLLHUP events on the socket. Reported-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:05 +01:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock_test: wait for the remote to close the connection Before check if a send returns -EPIPE, we need to make sure the connection is closed. To do that, we use epoll API to wait EPOLLRDHUP or EPOLLHUP events on the socket. Reported-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:05 +01:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: rework MSG_PEEK test for SOCK_STREAM This new version makes test more complicated by adding empty read, partial read and data comparisons between MSG_PEEK and normal reads. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:11 +03:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
vsock_test: add SOCK_STREAM MSG_PEEK test Test if the MSG_PEEK flags of recv(2) works as expected. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:08 +01:00
vsock/test: rework MSG_PEEK test for SOCK_STREAM This new version makes test more complicated by adding empty read, partial read and data comparisons between MSG_PEEK and normal reads. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:11 +03:00
vsock_test: add SOCK_STREAM MSG_PEEK test Test if the MSG_PEEK flags of recv(2) works as expected. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:08 +01:00
vsock/test: rework MSG_PEEK test for SOCK_STREAM This new version makes test more complicated by adding empty read, partial read and data comparisons between MSG_PEEK and normal reads. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:11 +03:00
vsock_test: add SOCK_STREAM MSG_PEEK test Test if the MSG_PEEK flags of recv(2) works as expected. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:08 +01:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
vsock_test: add SOCK_STREAM MSG_PEEK test Test if the MSG_PEEK flags of recv(2) works as expected. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:08 +01:00
vsock/test: rework MSG_PEEK test for SOCK_STREAM This new version makes test more complicated by adding empty read, partial read and data comparisons between MSG_PEEK and normal reads. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:11 +03:00
vsock/test: use send_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new send_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all the bytes to be sent with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:51 +02:00
vsock/test: rework MSG_PEEK test for SOCK_STREAM This new version makes test more complicated by adding empty read, partial read and data comparisons between MSG_PEEK and normal reads. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:11 +03:00
vsock_test: add SOCK_STREAM MSG_PEEK test Test if the MSG_PEEK flags of recv(2) works as expected. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:08 +01:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
vsock_test: add SOCK_STREAM MSG_PEEK test Test if the MSG_PEEK flags of recv(2) works as expected. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:08 +01:00
vsock/test: rework MSG_PEEK test for SOCK_STREAM This new version makes test more complicated by adding empty read, partial read and data comparisons between MSG_PEEK and normal reads. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:11 +03:00
vsock_test: add SOCK_STREAM MSG_PEEK test Test if the MSG_PEEK flags of recv(2) works as expected. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:08 +01:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
vsock_test: add SOCK_STREAM MSG_PEEK test Test if the MSG_PEEK flags of recv(2) works as expected. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:08 +01:00
vsock/test: rework MSG_PEEK test for SOCK_STREAM This new version makes test more complicated by adding empty read, partial read and data comparisons between MSG_PEEK and normal reads. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:11 +03:00
vsock/test: use recv_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new recv_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all bytes to be received with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:49 +02:00
vsock/test: rework MSG_PEEK test for SOCK_STREAM This new version makes test more complicated by adding empty read, partial read and data comparisons between MSG_PEEK and normal reads. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:11 +03:00
vsock/test: use recv_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new recv_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all bytes to be received with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:49 +02:00
vsock/test: rework MSG_PEEK test for SOCK_STREAM This new version makes test more complicated by adding empty read, partial read and data comparisons between MSG_PEEK and normal reads. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:11 +03:00
vsock/test: use recv_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new recv_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all bytes to be received with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:49 +02:00
vsock/test: rework MSG_PEEK test for SOCK_STREAM This new version makes test more complicated by adding empty read, partial read and data comparisons between MSG_PEEK and normal reads. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:11 +03:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
vsock/test: use recv_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new recv_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all bytes to be received with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:49 +02:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
vsock/test: use recv_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new recv_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all bytes to be received with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:49 +02:00
vsock/test: rework MSG_PEEK test for SOCK_STREAM This new version makes test more complicated by adding empty read, partial read and data comparisons between MSG_PEEK and normal reads. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:11 +03:00
vsock_test: add SOCK_STREAM MSG_PEEK test Test if the MSG_PEEK flags of recv(2) works as expected. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:08 +01:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock/test: fix SEQPACKET message bounds test Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-22 00:16:42 +03:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock/test: fix SEQPACKET message bounds test Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-22 00:16:42 +03:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock/test: fix SEQPACKET message bounds test Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-22 00:16:42 +03:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock/test: fix SEQPACKET message bounds test Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-22 00:16:42 +03:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock/test: use send_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new send_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all the bytes to be sent with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:51 +02:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls Change parameters of SO_VM_SOCKETS_* to unsigned long long as documented in the vm_sockets.h, because the corresponding kernel code requires them to be at least 64-bit, no matter what architecture. Otherwise they are too small on 32-bit machines. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Fixes: 685a21c314a8 ("test/vsock: add big message test") Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic") Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:55 -06:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock/test: verify socket options after setting them Replace setsockopt() calls with calls to functions that follow setsockopt() with getsockopt() and check that the returned value and its size are the same as have been set. (Except in vsock_perf.) Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:56 -06:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock/test: verify socket options after setting them Replace setsockopt() calls with calls to functions that follow setsockopt() with getsockopt() and check that the returned value and its size are the same as have been set. (Except in vsock_perf.) Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:56 -06:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
vsock/test: fix SEQPACKET message bounds test Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-22 00:16:42 +03:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
vsock_test: update message bounds test for MSG_EOR Set 'MSG_EOR' in one of message sent, check that 'MSG_EOR' is visible in corresponding message at receiver. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210903123321.3273866-1-arseny.krasnov@kaspersky.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-03 15:33:18 +03:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
vsock/test: fix SEQPACKET message bounds test Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-22 00:16:42 +03:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
vsock/test: use send_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new send_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all the bytes to be sent with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:51 +02:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
af_vsock: SOCK_SEQPACKET receive timeout test Test for receive timeout check: connection is established, receiver sets timeout, but sender does nothing. Receiver's 'read()' call must return EAGAIN. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:31:49 +00:00
vsock/test: Use NSEC_PER_SEC Replace 1000000000ULL with NSEC_PER_SEC. No functional change intended. Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-1-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:28 +01:00
af_vsock: SOCK_SEQPACKET receive timeout test Test for receive timeout check: connection is established, receiver sets timeout, but sender does nothing. Receiver's 'read()' call must return EAGAIN. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:31:49 +00:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
af_vsock: SOCK_SEQPACKET receive timeout test Test for receive timeout check: connection is established, receiver sets timeout, but sender does nothing. Receiver's 'read()' call must return EAGAIN. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:31:49 +00:00
vsock/test: verify socket options after setting them Replace setsockopt() calls with calls to functions that follow setsockopt() with getsockopt() and check that the returned value and its size are the same as have been set. (Except in vsock_perf.) Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:56 -06:00
af_vsock: SOCK_SEQPACKET receive timeout test Test for receive timeout check: connection is established, receiver sets timeout, but sender does nothing. Receiver's 'read()' call must return EAGAIN. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:31:49 +00:00
vsock/test: Use NSEC_PER_SEC Replace 1000000000ULL with NSEC_PER_SEC. No functional change intended. Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-1-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:28 +01:00
af_vsock: SOCK_SEQPACKET receive timeout test Test for receive timeout check: connection is established, receiver sets timeout, but sender does nothing. Receiver's 'read()' call must return EAGAIN. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:31:49 +00:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
af_vsock: SOCK_SEQPACKET receive timeout test Test for receive timeout check: connection is established, receiver sets timeout, but sender does nothing. Receiver's 'read()' call must return EAGAIN. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:31:49 +00:00
test/vsock: add big message test This adds test for sending message, bigger than peer's buffer size. For SOCK_SEQPACKET socket it must fail, as this type of socket has message size limit. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:17:02 +00:00
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls Change parameters of SO_VM_SOCKETS_* to unsigned long long as documented in the vm_sockets.h, because the corresponding kernel code requires them to be at least 64-bit, no matter what architecture. Otherwise they are too small on 32-bit machines. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Fixes: 685a21c314a8 ("test/vsock: add big message test") Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic") Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:55 -06:00
test/vsock: add big message test This adds test for sending message, bigger than peer's buffer size. For SOCK_SEQPACKET socket it must fail, as this type of socket has message size limit. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:17:02 +00:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: add big message test This adds test for sending message, bigger than peer's buffer size. For SOCK_SEQPACKET socket it must fail, as this type of socket has message size limit. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:17:02 +00:00
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls Change parameters of SO_VM_SOCKETS_* to unsigned long long as documented in the vm_sockets.h, because the corresponding kernel code requires them to be at least 64-bit, no matter what architecture. Otherwise they are too small on 32-bit machines. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Fixes: 685a21c314a8 ("test/vsock: add big message test") Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic") Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:55 -06:00
test/vsock: add big message test This adds test for sending message, bigger than peer's buffer size. For SOCK_SEQPACKET socket it must fail, as this type of socket has message size limit. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:17:02 +00:00
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls Change parameters of SO_VM_SOCKETS_* to unsigned long long as documented in the vm_sockets.h, because the corresponding kernel code requires them to be at least 64-bit, no matter what architecture. Otherwise they are too small on 32-bit machines. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Fixes: 685a21c314a8 ("test/vsock: add big message test") Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic") Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:55 -06:00
test/vsock: add big message test This adds test for sending message, bigger than peer's buffer size. For SOCK_SEQPACKET socket it must fail, as this type of socket has message size limit. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:17:02 +00:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: add big message test This adds test for sending message, bigger than peer's buffer size. For SOCK_SEQPACKET socket it must fail, as this type of socket has message size limit. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:17:02 +00:00
af_vsock: SOCK_SEQPACKET broken buffer test Add test where sender sends two message, each with own data pattern. Reader tries to read first to broken buffer: it has three pages size, but middle page is unmapped. Then, reader tries to read second message to valid buffer. Test checks, that uncopied part of first message was dropped and thus not copied as part of second message. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:33:23 +00:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
af_vsock: SOCK_SEQPACKET broken buffer test Add test where sender sends two message, each with own data pattern. Reader tries to read first to broken buffer: it has three pages size, but middle page is unmapped. Then, reader tries to read second message to valid buffer. Test checks, that uncopied part of first message was dropped and thus not copied as part of second message. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:33:23 +00:00
vsock/test: use send_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new send_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all the bytes to be sent with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:51 +02:00
af_vsock: SOCK_SEQPACKET broken buffer test Add test where sender sends two message, each with own data pattern. Reader tries to read first to broken buffer: it has three pages size, but middle page is unmapped. Then, reader tries to read second message to valid buffer. Test checks, that uncopied part of first message was dropped and thus not copied as part of second message. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:33:23 +00:00
vsock/test: use send_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new send_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all the bytes to be sent with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:51 +02:00
af_vsock: SOCK_SEQPACKET broken buffer test Add test where sender sends two message, each with own data pattern. Reader tries to read first to broken buffer: it has three pages size, but middle page is unmapped. Then, reader tries to read second message to valid buffer. Test checks, that uncopied part of first message was dropped and thus not copied as part of second message. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:33:23 +00:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
af_vsock: SOCK_SEQPACKET broken buffer test Add test where sender sends two message, each with own data pattern. Reader tries to read first to broken buffer: it has three pages size, but middle page is unmapped. Then, reader tries to read second message to valid buffer. Test checks, that uncopied part of first message was dropped and thus not copied as part of second message. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:33:23 +00:00
vsock/test: update expected return values This updates expected return values for invalid buffer test. Now such values are returned from transport, not from af_vsock.c. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-03 14:26:18 +03:00
af_vsock: SOCK_SEQPACKET broken buffer test Add test where sender sends two message, each with own data pattern. Reader tries to read first to broken buffer: it has three pages size, but middle page is unmapped. Then, reader tries to read second message to valid buffer. Test checks, that uncopied part of first message was dropped and thus not copied as part of second message. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:33:23 +00:00
vsock_test: POLLIN + SO_RCVLOWAT test This adds test to check, that when poll() returns POLLIN, POLLRDNORM bits, next read call won't block. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 05:43:50 +00:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
vsock_test: POLLIN + SO_RCVLOWAT test This adds test to check, that when poll() returns POLLIN, POLLRDNORM bits, next read call won't block. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 05:43:50 +00:00
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter This happens on 64-bit big-endian machines. SO_RCVLOWAT requires an int parameter. However, instead of int, the test uses unsigned long in one place and size_t in another. Both are 8 bytes long on 64-bit machines. The kernel, having received the 8 bytes, doesn't test for the exact size of the parameter, it only cares that it's >= sizeof(int), and casts the 4 lower-addressed bytes to an int, which, on a big-endian machine, contains 0. 0 doesn't trigger an error, SO_RCVLOWAT returns with success and the socket stays with the default SO_RCVLOWAT = 1, which results in vsock_test failures, while vsock_perf doesn't even notice that it's failed to change it. Fixes: b1346338fbae ("vsock_test: POLLIN + SO_RCVLOWAT test") Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic") Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:54 -06:00
vsock_test: POLLIN + SO_RCVLOWAT test This adds test to check, that when poll() returns POLLIN, POLLRDNORM bits, next read call won't block. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 05:43:50 +00:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
vsock_test: POLLIN + SO_RCVLOWAT test This adds test to check, that when poll() returns POLLIN, POLLRDNORM bits, next read call won't block. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 05:43:50 +00:00
vsock/test: verify socket options after setting them Replace setsockopt() calls with calls to functions that follow setsockopt() with getsockopt() and check that the returned value and its size are the same as have been set. (Except in vsock_perf.) Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:56 -06:00
vsock_test: POLLIN + SO_RCVLOWAT test This adds test to check, that when poll() returns POLLIN, POLLRDNORM bits, next read call won't block. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 05:43:50 +00:00
vsock/test: use recv_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new recv_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all bytes to be received with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:49 +02:00
vsock_test: POLLIN + SO_RCVLOWAT test This adds test to check, that when poll() returns POLLIN, POLLRDNORM bits, next read call won't block. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 05:43:50 +00:00
test/vsock: copy to user failure test This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 14:09:27 +03:00
vsock/test: use recv_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new recv_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all bytes to be received with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:49 +02:00
test/vsock: copy to user failure test This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 14:09:27 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: copy to user failure test This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 14:09:27 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: copy to user failure test This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 14:09:27 +03:00
vsock/test: use recv_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new recv_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all bytes to be received with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:49 +02:00
test/vsock: copy to user failure test This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 14:09:27 +03:00
vsock/test: use recv_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new recv_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all bytes to be received with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:49 +02:00
test/vsock: copy to user failure test This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 14:09:27 +03:00
vsock/test: use recv_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new recv_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all bytes to be received with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:49 +02:00
test/vsock: copy to user failure test This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 14:09:27 +03:00
vsock/test: use recv_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new recv_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all bytes to be received with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:49 +02:00
test/vsock: copy to user failure test This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 14:09:27 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: copy to user failure test This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 14:09:27 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: copy to user failure test This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 14:09:27 +03:00
vsock/test: use send_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new send_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all the bytes to be sent with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:51 +02:00
test/vsock: copy to user failure test This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 14:09:27 +03:00
test/vsock: new skbuff appending test This adds test which checks case when data of newly received skbuff is appended to the last skbuff in the socket's queue. It looks like simple test with 'send()' and 'recv()', but internally it triggers logic which appends one received skbuff to another. Test checks that this feature works correctly. This test is actual only for virtio transport. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28 14:33:07 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: new skbuff appending test This adds test which checks case when data of newly received skbuff is appended to the last skbuff in the socket's queue. It looks like simple test with 'send()' and 'recv()', but internally it triggers logic which appends one received skbuff to another. Test checks that this feature works correctly. This test is actual only for virtio transport. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28 14:33:07 +03:00
vsock/test: use send_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new send_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all the bytes to be sent with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:51 +02:00
test/vsock: new skbuff appending test This adds test which checks case when data of newly received skbuff is appended to the last skbuff in the socket's queue. It looks like simple test with 'send()' and 'recv()', but internally it triggers logic which appends one received skbuff to another. Test checks that this feature works correctly. This test is actual only for virtio transport. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28 14:33:07 +03:00
vsock/test: use send_buf() in vsock_test.c We have a very common pattern used in vsock_test that we can now replace with the new send_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all the bytes to be sent with an appropriate timeout. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:51 +02:00
test/vsock: new skbuff appending test This adds test which checks case when data of newly received skbuff is appended to the last skbuff in the socket's queue. It looks like simple test with 'send()' and 'recv()', but internally it triggers logic which appends one received skbuff to another. Test checks that this feature works correctly. This test is actual only for virtio transport. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28 14:33:07 +03:00
vsock/test: track bytes in sk_buff merging test for SOCK_SEQPACKET The test was a bit complicated to read. Added variables to keep track of the bytes read and to be read in each step. Also some comments. The test is unchanged. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:52 +02:00
test/vsock: new skbuff appending test This adds test which checks case when data of newly received skbuff is appended to the last skbuff in the socket's queue. It looks like simple test with 'send()' and 'recv()', but internally it triggers logic which appends one received skbuff to another. Test checks that this feature works correctly. This test is actual only for virtio transport. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28 14:33:07 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: new skbuff appending test This adds test which checks case when data of newly received skbuff is appended to the last skbuff in the socket's queue. It looks like simple test with 'send()' and 'recv()', but internally it triggers logic which appends one received skbuff to another. Test checks that this feature works correctly. This test is actual only for virtio transport. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28 14:33:07 +03:00
vsock/test: track bytes in sk_buff merging test for SOCK_SEQPACKET The test was a bit complicated to read. Added variables to keep track of the bytes read and to be read in each step. Also some comments. The test is unchanged. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:52 +02:00
test/vsock: new skbuff appending test This adds test which checks case when data of newly received skbuff is appended to the last skbuff in the socket's queue. It looks like simple test with 'send()' and 'recv()', but internally it triggers logic which appends one received skbuff to another. Test checks that this feature works correctly. This test is actual only for virtio transport. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28 14:33:07 +03:00
vsock/test: track bytes in sk_buff merging test for SOCK_SEQPACKET The test was a bit complicated to read. Added variables to keep track of the bytes read and to be read in each step. Also some comments. The test is unchanged. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:52 +02:00
test/vsock: new skbuff appending test This adds test which checks case when data of newly received skbuff is appended to the last skbuff in the socket's queue. It looks like simple test with 'send()' and 'recv()', but internally it triggers logic which appends one received skbuff to another. Test checks that this feature works correctly. This test is actual only for virtio transport. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28 14:33:07 +03:00
vsock/test: track bytes in sk_buff merging test for SOCK_SEQPACKET The test was a bit complicated to read. Added variables to keep track of the bytes read and to be read in each step. Also some comments. The test is unchanged. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 14:14:52 +02:00
test/vsock: new skbuff appending test This adds test which checks case when data of newly received skbuff is appended to the last skbuff in the socket's queue. It looks like simple test with 'send()' and 'recv()', but internally it triggers logic which appends one received skbuff to another. Test checks that this feature works correctly. This test is actual only for virtio transport. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28 14:33:07 +03:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
test/vsock: shutdowned socket test This adds two tests for 'shutdown()' call. It checks that SIGPIPE is sent when MSG_NOSIGNAL is not set and vice versa. Both flags SHUT_WR and SHUT_RD are tested. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-11 23:20:27 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: shutdowned socket test This adds two tests for 'shutdown()' call. It checks that SIGPIPE is sent when MSG_NOSIGNAL is not set and vice versa. Both flags SHUT_WR and SHUT_RD are tested. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-11 23:20:27 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: shutdowned socket test This adds two tests for 'shutdown()' call. It checks that SIGPIPE is sent when MSG_NOSIGNAL is not set and vice versa. Both flags SHUT_WR and SHUT_RD are tested. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-11 23:20:27 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: shutdowned socket test This adds two tests for 'shutdown()' call. It checks that SIGPIPE is sent when MSG_NOSIGNAL is not set and vice versa. Both flags SHUT_WR and SHUT_RD are tested. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-11 23:20:27 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: shutdowned socket test This adds two tests for 'shutdown()' call. It checks that SIGPIPE is sent when MSG_NOSIGNAL is not set and vice versa. Both flags SHUT_WR and SHUT_RD are tested. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-11 23:20:27 +03:00
test/vsock: add dobule bind connect test This add bind connect test which creates a listening server socket and tries to connect a client with a bound local port to it twice. Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com> Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com> Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-03 18:55:51 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: add dobule bind connect test This add bind connect test which creates a listening server socket and tries to connect a client with a bound local port to it twice. Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com> Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com> Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-03 18:55:51 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
test/vsock: add dobule bind connect test This add bind connect test which creates a listening server socket and tries to connect a client with a bound local port to it twice. Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com> Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com> Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-03 18:55:51 +01:00
test/vsock: add ioctl unsent bytes test Introduce two tests, one for SOCK_STREAM and one for SOCK_SEQPACKET, which use SIOCOUTQ ioctl to check that the number of unsent bytes is zero after delivering a packet. vsock_connect and vsock_accept are no longer static: this is to create more generic tests, allowing code to be reused for SEQPACKET and STREAM. Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-30 21:43:08 +02:00
vsock/test: two tests to check credit update logic Both tests are almost same, only differs in two 'if' conditions, so implemented in a single function. Tests check, that credit update message is sent: 1) During setting SO_RCVLOWAT value of the socket. 2) When number of 'rx_bytes' become smaller than SO_RCVLOWAT value. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-14 15:52:30 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
vsock/test: two tests to check credit update logic Both tests are almost same, only differs in two 'if' conditions, so implemented in a single function. Tests check, that credit update message is sent: 1) During setting SO_RCVLOWAT value of the socket. 2) When number of 'rx_bytes' become smaller than SO_RCVLOWAT value. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-14 15:52:30 +03:00
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter This happens on 64-bit big-endian machines. SO_RCVLOWAT requires an int parameter. However, instead of int, the test uses unsigned long in one place and size_t in another. Both are 8 bytes long on 64-bit machines. The kernel, having received the 8 bytes, doesn't test for the exact size of the parameter, it only cares that it's >= sizeof(int), and casts the 4 lower-addressed bytes to an int, which, on a big-endian machine, contains 0. 0 doesn't trigger an error, SO_RCVLOWAT returns with success and the socket stays with the default SO_RCVLOWAT = 1, which results in vsock_test failures, while vsock_perf doesn't even notice that it's failed to change it. Fixes: b1346338fbae ("vsock_test: POLLIN + SO_RCVLOWAT test") Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic") Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:54 -06:00
vsock/test: two tests to check credit update logic Both tests are almost same, only differs in two 'if' conditions, so implemented in a single function. Tests check, that credit update message is sent: 1) During setting SO_RCVLOWAT value of the socket. 2) When number of 'rx_bytes' become smaller than SO_RCVLOWAT value. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-14 15:52:30 +03:00
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls Change parameters of SO_VM_SOCKETS_* to unsigned long long as documented in the vm_sockets.h, because the corresponding kernel code requires them to be at least 64-bit, no matter what architecture. Otherwise they are too small on 32-bit machines. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Fixes: 685a21c314a8 ("test/vsock: add big message test") Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic") Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:55 -06:00
vsock/test: two tests to check credit update logic Both tests are almost same, only differs in two 'if' conditions, so implemented in a single function. Tests check, that credit update message is sent: 1) During setting SO_RCVLOWAT value of the socket. 2) When number of 'rx_bytes' become smaller than SO_RCVLOWAT value. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-14 15:52:30 +03:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
vsock/test: two tests to check credit update logic Both tests are almost same, only differs in two 'if' conditions, so implemented in a single function. Tests check, that credit update message is sent: 1) During setting SO_RCVLOWAT value of the socket. 2) When number of 'rx_bytes' become smaller than SO_RCVLOWAT value. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-14 15:52:30 +03:00
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls Change parameters of SO_VM_SOCKETS_* to unsigned long long as documented in the vm_sockets.h, because the corresponding kernel code requires them to be at least 64-bit, no matter what architecture. Otherwise they are too small on 32-bit machines. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Fixes: 685a21c314a8 ("test/vsock: add big message test") Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic") Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:55 -06:00
vsock/test: verify socket options after setting them Replace setsockopt() calls with calls to functions that follow setsockopt() with getsockopt() and check that the returned value and its size are the same as have been set. (Except in vsock_perf.) Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:56 -06:00
vsock/test: two tests to check credit update logic Both tests are almost same, only differs in two 'if' conditions, so implemented in a single function. Tests check, that credit update message is sent: 1) During setting SO_RCVLOWAT value of the socket. 2) When number of 'rx_bytes' become smaller than SO_RCVLOWAT value. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-14 15:52:30 +03:00
vsock/test: verify socket options after setting them Replace setsockopt() calls with calls to functions that follow setsockopt() with getsockopt() and check that the returned value and its size are the same as have been set. (Except in vsock_perf.) Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:56 -06:00
vsock/test: two tests to check credit update logic Both tests are almost same, only differs in two 'if' conditions, so implemented in a single function. Tests check, that credit update message is sent: 1) During setting SO_RCVLOWAT value of the socket. 2) When number of 'rx_bytes' become smaller than SO_RCVLOWAT value. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-14 15:52:30 +03:00
vsock/test: verify socket options after setting them Replace setsockopt() calls with calls to functions that follow setsockopt() with getsockopt() and check that the returned value and its size are the same as have been set. (Except in vsock_perf.) Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-03 09:06:56 -06:00
vsock/test: two tests to check credit update logic Both tests are almost same, only differs in two 'if' conditions, so implemented in a single function. Tests check, that credit update message is sent: 1) During setting SO_RCVLOWAT value of the socket. 2) When number of 'rx_bytes' become smaller than SO_RCVLOWAT value. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-14 15:52:30 +03:00
vsock/test: Add test for accept_queue memory leak Attempt to enqueue a child after the queue was flushed, but before SOCK_DONE flag has been set. Test tries to produce a memory leak, kmemleak should be employed. Dealing with a race condition, test by its very nature may lead to a false negative. Fixed by commit d7b0ff5a8667 ("virtio/vsock: Fix accept_queue memory leak"). Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-5-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:32 +01:00
vsock/test: Add test for sk_error_queue memory leak Ask for MSG_ZEROCOPY completion notification, but do not recv() it. Test attempts to create a memory leak, kmemleak should be employed. Fixed by commit fbf7085b3ad1 ("vsock: Fix sk_error_queue memory leak"). Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-6-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:33 +01:00
vsock/test: Add test for MSG_ZEROCOPY completion memory leak Exercise the ENOMEM error path by attempting to hit net.core.optmem_max limit on send(). Test aims to create a memory leak, kmemleak should be employed. Fixed by commit 60cf6206a1f5 ("virtio/vsock: Improve MSG_ZEROCOPY error handling"). Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-7-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:34 +01:00
vsock/test: Add test for UAF due to socket unbinding Fail the autobind, then trigger a transport reassign. Socket might get unbound from unbound_sockets, which then leads to a reference count underflow. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-5-1cf57065b770@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28 14:15:31 +01:00
vsock/test: Add test for connect() retries Deliberately fail a connect() attempt; expect error. Then verify that subsequent attempt (using the same socket) can still succeed, rather than fail outright. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-6-1cf57065b770@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28 14:15:32 +01:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
tools: testing: vsock: Test when server is bound but not listening Whenever the server side of vsock is binding to the socket, but not listening yet, we expect the behavior from the client to be identical to what happens when the server is not even started. This new test runs the server side so that it binds to the socket without ever listening to it. The client side will try to connect and should receive an ECONNRESET error. This new test provides a way to validate the previously introduced patch for making sure the server side will always answer with a RST packet in case the client requested a new connection. Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14 12:48:02 +01:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock_test: add SOCK_STREAM MSG_PEEK test Test if the MSG_PEEK flags of recv(2) works as expected. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:08 +01:00
vsock_test: add SOCK_SEQPACKET tests Implement two tests of SOCK_SEQPACKET socket: first sends data by several 'write()'s and checks that number of 'read()' were same. Second test checks MSG_TRUNC flag. Cases for connect(), bind(), etc. are not tested, because it is same as for stream socket. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 14:14:04 +03:00
af_vsock: SOCK_SEQPACKET receive timeout test Test for receive timeout check: connection is established, receiver sets timeout, but sender does nothing. Receiver's 'read()' call must return EAGAIN. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:31:49 +00:00
af_vsock: SOCK_SEQPACKET broken buffer test Add test where sender sends two message, each with own data pattern. Reader tries to read first to broken buffer: it has three pages size, but middle page is unmapped. Then, reader tries to read second message to valid buffer. Test checks, that uncopied part of first message was dropped and thus not copied as part of second message. Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17 08:33:23 +00:00
vsock_test: POLLIN + SO_RCVLOWAT test This adds test to check, that when poll() returns POLLIN, POLLRDNORM bits, next read call won't block. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 05:43:50 +00:00
test/vsock: add big message test This adds test for sending message, bigger than peer's buffer size. For SOCK_SEQPACKET socket it must fail, as this type of socket has message size limit. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:17:02 +00:00
test/vsock: copy to user failure test This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 14:09:27 +03:00
test/vsock: new skbuff appending test This adds test which checks case when data of newly received skbuff is appended to the last skbuff in the socket's queue. It looks like simple test with 'send()' and 'recv()', but internally it triggers logic which appends one received skbuff to another. Test checks that this feature works correctly. This test is actual only for virtio transport. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28 14:33:07 +03:00
vsock/test: MSG_PEEK test for SOCK_SEQPACKET This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as SOCK_STREAM test, except it also tests MSG_TRUNC flag. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25 20:29:12 +03:00
test/vsock: shutdowned socket test This adds two tests for 'shutdown()' call. It checks that SIGPIPE is sent when MSG_NOSIGNAL is not set and vice versa. Both flags SHUT_WR and SHUT_RD are tested. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-11 23:20:27 +03:00
test/vsock: MSG_ZEROCOPY flag tests This adds three tests for MSG_ZEROCOPY feature: 1) SOCK_STREAM tx with different buffers. 2) SOCK_SEQPACKET tx with different buffers. 3) SOCK_STREAM test to read empty error queue of the socket. Patch also works as preparation for the next patches for tools in this patchset: vsock_perf and vsock_uring_test: 1) Adds several new functions to util.c - they will be also used by vsock_uring_test. 2) Adds two new functions for MSG_ZEROCOPY handling to a new source file - such source will be shared between vsock_test, vsock_perf and vsock_uring_test, thus avoiding code copy-pasting. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-10 22:15:22 +03:00
test/vsock: add dobule bind connect test This add bind connect test which creates a listening server socket and tries to connect a client with a bound local port to it twice. Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com> Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com> Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-03 18:55:51 +01:00
vsock/test: two tests to check credit update logic Both tests are almost same, only differs in two 'if' conditions, so implemented in a single function. Tests check, that credit update message is sent: 1) During setting SO_RCVLOWAT value of the socket. 2) When number of 'rx_bytes' become smaller than SO_RCVLOWAT value. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-14 15:52:30 +03:00
test/vsock: add ioctl unsent bytes test Introduce two tests, one for SOCK_STREAM and one for SOCK_SEQPACKET, which use SIOCOUTQ ioctl to check that the number of unsent bytes is zero after delivering a packet. vsock_connect and vsock_accept are no longer static: this is to create more generic tests, allowing code to be reused for SEQPACKET and STREAM. Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-30 21:43:08 +02:00
vsock/test: Add test for accept_queue memory leak Attempt to enqueue a child after the queue was flushed, but before SOCK_DONE flag has been set. Test tries to produce a memory leak, kmemleak should be employed. Dealing with a race condition, test by its very nature may lead to a false negative. Fixed by commit d7b0ff5a8667 ("virtio/vsock: Fix accept_queue memory leak"). Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-5-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:32 +01:00
vsock/test: Add test for sk_error_queue memory leak Ask for MSG_ZEROCOPY completion notification, but do not recv() it. Test attempts to create a memory leak, kmemleak should be employed. Fixed by commit fbf7085b3ad1 ("vsock: Fix sk_error_queue memory leak"). Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-6-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:33 +01:00
vsock/test: Add test for MSG_ZEROCOPY completion memory leak Exercise the ENOMEM error path by attempting to hit net.core.optmem_max limit on send(). Test aims to create a memory leak, kmemleak should be employed. Fixed by commit 60cf6206a1f5 ("virtio/vsock: Improve MSG_ZEROCOPY error handling"). Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-7-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:34 +01:00
vsock/test: Add test for UAF due to socket unbinding Fail the autobind, then trigger a transport reassign. Socket might get unbound from unbound_sockets, which then leads to a reference count underflow. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-5-1cf57065b770@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28 14:15:31 +01:00
vsock/test: Add test for connect() retries Deliberately fail a connect() attempt; expect error. Then verify that subsequent attempt (using the same socket) can still succeed, rather than fail outright. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-6-1cf57065b770@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28 14:15:32 +01:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
testing/vsock: add parameters to list and skip tests Some tests can fail with transports that have a slightly different behavior, so let's add the possibility to specify which tests to skip. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:06 +01:00
vsock/test: Introduce option to select tests Allow for selecting specific test IDs to be executed. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-2-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:29 +01:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
testing/vsock: print list of options and description Since we now have several options, in the help we print the list of all supported options and a brief description of them. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:07 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
testing/vsock: print list of options and description Since we now have several options, in the help we print the list of all supported options and a brief description of them. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:07 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
testing/vsock: print list of options and description Since we now have several options, in the help we print the list of all supported options and a brief description of them. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:07 +01:00
vsock/test: Introduce option to select tests Allow for selecting specific test IDs to be executed. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-2-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:29 +01:00
testing/vsock: print list of options and description Since we now have several options, in the help we print the list of all supported options and a brief description of them. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:07 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
testing/vsock: print list of options and description Since we now have several options, in the help we print the list of all supported options and a brief description of them. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:07 +01:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
test/vsock: rework message bounds test This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10 10:15:15 +00:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
vsock/test: add '--peer-port' input argument Implement port for given CID as input argument instead of using hardcoded value '1234'. This allows to run different test instances on a single CID. Port argument is not required parameter and if it is not set, then default value will be '1234' - thus we preserve previous behaviour. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 10:27:50 +03:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00
testing/vsock: add parameters to list and skip tests Some tests can fail with transports that have a slightly different behavior, so let's add the possibility to specify which tests to skip. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:06 +01:00
vsock/test: Introduce option to select tests Allow for selecting specific test IDs to be executed. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-2-a416e554d9d7@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19 10:49:29 +01:00
VSOCK: add AF_VSOCK test cases The vsock_test.c program runs a test suite of AF_VSOCK test cases. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 19:07:04 +01:00