linux/net/core/netdev-genl.c

974 lines
24 KiB

netdev: support binding dma-buf to netdevice Add a netdev_dmabuf_binding struct which represents the dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to rx queues on the netdevice. On the binding, the dma_buf_attach & dma_buf_map_attachment will occur. The entries in the sg_table from mapping will be inserted into a genpool to make it ready for allocation. The chunks in the genpool are owned by a dmabuf_chunk_owner struct which holds the dma-buf offset of the base of the chunk and the dma_addr of the chunk. Both are needed to use allocations that come from this chunk. We create a new type that represents an allocation from the genpool: net_iov. We setup the net_iov allocation size in the genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally allocated by the page pool and given to the drivers. The user can unbind the dmabuf from the netdevice by closing the netlink socket that established the binding. We do this so that the binding is automatically unbound even if the userspace process crashes. The binding and unbinding leaves an indicator in struct netdev_rx_queue that the given queue is bound, and the binding is actuated by resetting the rx queue using the queue API. The netdev_dmabuf_binding struct is refcounted, and releases its resources only when all the refs are released. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com> Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 17:14:47 +00:00
netdev: support binding dma-buf to netdevice Add a netdev_dmabuf_binding struct which represents the dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to rx queues on the netdevice. On the binding, the dma_buf_attach & dma_buf_map_attachment will occur. The entries in the sg_table from mapping will be inserted into a genpool to make it ready for allocation. The chunks in the genpool are owned by a dmabuf_chunk_owner struct which holds the dma-buf offset of the base of the chunk and the dma_addr of the chunk. Both are needed to use allocations that come from this chunk. We create a new type that represents an allocation from the genpool: net_iov. We setup the net_iov allocation size in the genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally allocated by the page pool and given to the drivers. The user can unbind the dmabuf from the netdevice by closing the netlink socket that established the binding. We do this so that the binding is automatically unbound even if the userspace process crashes. The binding and unbinding leaves an indicator in struct netdev_rx_queue that the given queue is bound, and the binding is actuated by resetting the rx queue using the queue API. The netdev_dmabuf_binding struct is refcounted, and releases its resources only when all the refs are released. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com> Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 17:14:47 +00:00
xsk: Add TX timestamp and TX checksum offload support This change actually defines the (initial) metadata layout that should be used by AF_XDP userspace (xsk_tx_metadata). The first field is flags which requests appropriate offloads, followed by the offload-specific fields. The supported per-device offloads are exported via netlink (new xsk-flags). The offloads themselves are still implemented in a bit of a framework-y fashion that's left from my initial kfunc attempt. I'm introducing new xsk_tx_metadata_ops which drivers are supposed to implement. The drivers are also supposed to call xsk_tx_metadata_request/xsk_tx_metadata_complete in the right places. Since xsk_tx_metadata_{request,_complete} are static inline, we don't incur any extra overhead doing indirect calls. The benefit of this scheme is as follows: - keeps all metadata layout parsing away from driver code - makes it easy to grep and see which drivers implement what - don't need any extra flags to maintain to keep track of what offloads are implemented; if the callback is implemented - the offload is supported (used by netlink reporting code) Two offloads are defined right now: 1. XDP_TXMD_FLAGS_CHECKSUM: skb-style csum_start+csum_offset 2. XDP_TXMD_FLAGS_TIMESTAMP: writes TX timestamp back into metadata area upon completion (tx_timestamp field) XDP_TXMD_FLAGS_TIMESTAMP is also implemented for XDP_COPY mode: it writes SW timestamp from the skb destructor (note I'm reusing hwtstamps to pass metadata pointer). The struct is forward-compatible and can be extended in the future by appending more fields. Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20231127190319.1190813-3-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-27 11:03:08 -08:00
netdev: support binding dma-buf to netdevice Add a netdev_dmabuf_binding struct which represents the dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to rx queues on the netdevice. On the binding, the dma_buf_attach & dma_buf_map_attachment will occur. The entries in the sg_table from mapping will be inserted into a genpool to make it ready for allocation. The chunks in the genpool are owned by a dmabuf_chunk_owner struct which holds the dma-buf offset of the base of the chunk and the dma_addr of the chunk. Both are needed to use allocations that come from this chunk. We create a new type that represents an allocation from the genpool: net_iov. We setup the net_iov allocation size in the genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally allocated by the page pool and given to the drivers. The user can unbind the dmabuf from the netdevice by closing the netlink socket that established the binding. We do this so that the binding is automatically unbound even if the userspace process crashes. The binding and unbinding leaves an indicator in struct netdev_rx_queue that the given queue is bound, and the binding is actuated by resetting the rx queue using the queue API. The netdev_dmabuf_binding struct is refcounted, and releases its resources only when all the refs are released. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com> Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 17:14:47 +00:00
xsk: Add TX timestamp and TX checksum offload support This change actually defines the (initial) metadata layout that should be used by AF_XDP userspace (xsk_tx_metadata). The first field is flags which requests appropriate offloads, followed by the offload-specific fields. The supported per-device offloads are exported via netlink (new xsk-flags). The offloads themselves are still implemented in a bit of a framework-y fashion that's left from my initial kfunc attempt. I'm introducing new xsk_tx_metadata_ops which drivers are supposed to implement. The drivers are also supposed to call xsk_tx_metadata_request/xsk_tx_metadata_complete in the right places. Since xsk_tx_metadata_{request,_complete} are static inline, we don't incur any extra overhead doing indirect calls. The benefit of this scheme is as follows: - keeps all metadata layout parsing away from driver code - makes it easy to grep and see which drivers implement what - don't need any extra flags to maintain to keep track of what offloads are implemented; if the callback is implemented - the offload is supported (used by netlink reporting code) Two offloads are defined right now: 1. XDP_TXMD_FLAGS_CHECKSUM: skb-style csum_start+csum_offset 2. XDP_TXMD_FLAGS_TIMESTAMP: writes TX timestamp back into metadata area upon completion (tx_timestamp field) XDP_TXMD_FLAGS_TIMESTAMP is also implemented for XDP_COPY mode: it writes SW timestamp from the skb destructor (note I'm reusing hwtstamps to pass metadata pointer). The struct is forward-compatible and can be extended in the future by appending more fields. Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20231127190319.1190813-3-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-27 11:03:08 -08:00
xsk: Add TX timestamp and TX checksum offload support This change actually defines the (initial) metadata layout that should be used by AF_XDP userspace (xsk_tx_metadata). The first field is flags which requests appropriate offloads, followed by the offload-specific fields. The supported per-device offloads are exported via netlink (new xsk-flags). The offloads themselves are still implemented in a bit of a framework-y fashion that's left from my initial kfunc attempt. I'm introducing new xsk_tx_metadata_ops which drivers are supposed to implement. The drivers are also supposed to call xsk_tx_metadata_request/xsk_tx_metadata_complete in the right places. Since xsk_tx_metadata_{request,_complete} are static inline, we don't incur any extra overhead doing indirect calls. The benefit of this scheme is as follows: - keeps all metadata layout parsing away from driver code - makes it easy to grep and see which drivers implement what - don't need any extra flags to maintain to keep track of what offloads are implemented; if the callback is implemented - the offload is supported (used by netlink reporting code) Two offloads are defined right now: 1. XDP_TXMD_FLAGS_CHECKSUM: skb-style csum_start+csum_offset 2. XDP_TXMD_FLAGS_TIMESTAMP: writes TX timestamp back into metadata area upon completion (tx_timestamp field) XDP_TXMD_FLAGS_TIMESTAMP is also implemented for XDP_COPY mode: it writes SW timestamp from the skb destructor (note I'm reusing hwtstamps to pass metadata pointer). The struct is forward-compatible and can be extended in the future by appending more fields. Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20231127190319.1190813-3-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-27 11:03:08 -08:00
xsk: Add TX timestamp and TX checksum offload support This change actually defines the (initial) metadata layout that should be used by AF_XDP userspace (xsk_tx_metadata). The first field is flags which requests appropriate offloads, followed by the offload-specific fields. The supported per-device offloads are exported via netlink (new xsk-flags). The offloads themselves are still implemented in a bit of a framework-y fashion that's left from my initial kfunc attempt. I'm introducing new xsk_tx_metadata_ops which drivers are supposed to implement. The drivers are also supposed to call xsk_tx_metadata_request/xsk_tx_metadata_complete in the right places. Since xsk_tx_metadata_{request,_complete} are static inline, we don't incur any extra overhead doing indirect calls. The benefit of this scheme is as follows: - keeps all metadata layout parsing away from driver code - makes it easy to grep and see which drivers implement what - don't need any extra flags to maintain to keep track of what offloads are implemented; if the callback is implemented - the offload is supported (used by netlink reporting code) Two offloads are defined right now: 1. XDP_TXMD_FLAGS_CHECKSUM: skb-style csum_start+csum_offset 2. XDP_TXMD_FLAGS_TIMESTAMP: writes TX timestamp back into metadata area upon completion (tx_timestamp field) XDP_TXMD_FLAGS_TIMESTAMP is also implemented for XDP_COPY mode: it writes SW timestamp from the skb destructor (note I'm reusing hwtstamps to pass metadata pointer). The struct is forward-compatible and can be extended in the future by appending more fields. Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20231127190319.1190813-3-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-27 11:03:08 -08:00
netdev: add dmabuf introspection Add dmabuf information to page_pool stats: $ ./cli.py --spec ../netlink/specs/netdev.yaml --dump page-pool-get ... {'dmabuf': 10, 'id': 456, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 455, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 454, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 453, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 452, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 451, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 450, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 449, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, And queue stats: $ ./cli.py --spec ../netlink/specs/netdev.yaml --dump queue-get ... {'dmabuf': 10, 'id': 8, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 9, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 10, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 11, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 12, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 13, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 14, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 15, 'ifindex': 3, 'type': 'rx'}, Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240910171458.219195-14-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 17:14:57 +00:00
netdev: add dmabuf introspection Add dmabuf information to page_pool stats: $ ./cli.py --spec ../netlink/specs/netdev.yaml --dump page-pool-get ... {'dmabuf': 10, 'id': 456, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 455, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 454, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 453, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 452, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 451, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 450, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, {'dmabuf': 10, 'id': 449, 'ifindex': 3, 'inflight': 1023, 'inflight-mem': 4190208}, And queue stats: $ ./cli.py --spec ../netlink/specs/netdev.yaml --dump queue-get ... {'dmabuf': 10, 'id': 8, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 9, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 10, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 11, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 12, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 13, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 14, 'ifindex': 3, 'type': 'rx'}, {'dmabuf': 10, 'id': 15, 'ifindex': 3, 'type': 'rx'}, Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240910171458.219195-14-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 17:14:57 +00:00
netdev: add per-queue statistics The ethtool-nl family does a good job exposing various protocol related and IEEE/IETF statistics which used to get dumped under ethtool -S, with creative names. Queue stats don't have a netlink API, yet, and remain a lion's share of ethtool -S output for new drivers. Not only is that bad because the names differ driver to driver but it's also bug-prone. Intuitively drivers try to report only the stats for active queues, but querying ethtool stats involves multiple system calls, and the number of stats is read separately from the stats themselves. Worse still when user space asks for values of the stats, it doesn't inform the kernel how big the buffer is. If number of stats increases in the meantime kernel will overflow user buffer. Add a netlink API for dumping queue stats. Queue information is exposed via the netdev-genl family, so add the stats there. Support per-queue and sum-for-device dumps. Latter will be useful when subsequent patches add more interesting common stats than just bytes and packets. The API does not currently distinguish between HW and SW stats. The expectation is that the source of the stats will either not matter much (good packets) or be obvious (skb alloc errors). Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06 11:55:07 -08:00
netdev: add per-queue statistics The ethtool-nl family does a good job exposing various protocol related and IEEE/IETF statistics which used to get dumped under ethtool -S, with creative names. Queue stats don't have a netlink API, yet, and remain a lion's share of ethtool -S output for new drivers. Not only is that bad because the names differ driver to driver but it's also bug-prone. Intuitively drivers try to report only the stats for active queues, but querying ethtool stats involves multiple system calls, and the number of stats is read separately from the stats themselves. Worse still when user space asks for values of the stats, it doesn't inform the kernel how big the buffer is. If number of stats increases in the meantime kernel will overflow user buffer. Add a netlink API for dumping queue stats. Queue information is exposed via the netdev-genl family, so add the stats there. Support per-queue and sum-for-device dumps. Latter will be useful when subsequent patches add more interesting common stats than just bytes and packets. The API does not currently distinguish between HW and SW stats. The expectation is that the source of the stats will either not matter much (good packets) or be obvious (skb alloc errors). Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06 11:55:07 -08:00
netdev: add per-queue statistics The ethtool-nl family does a good job exposing various protocol related and IEEE/IETF statistics which used to get dumped under ethtool -S, with creative names. Queue stats don't have a netlink API, yet, and remain a lion's share of ethtool -S output for new drivers. Not only is that bad because the names differ driver to driver but it's also bug-prone. Intuitively drivers try to report only the stats for active queues, but querying ethtool stats involves multiple system calls, and the number of stats is read separately from the stats themselves. Worse still when user space asks for values of the stats, it doesn't inform the kernel how big the buffer is. If number of stats increases in the meantime kernel will overflow user buffer. Add a netlink API for dumping queue stats. Queue information is exposed via the netdev-genl family, so add the stats there. Support per-queue and sum-for-device dumps. Latter will be useful when subsequent patches add more interesting common stats than just bytes and packets. The API does not currently distinguish between HW and SW stats. The expectation is that the source of the stats will either not matter much (good packets) or be obvious (skb alloc errors). Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06 11:55:07 -08:00
netdev: fix repeated netlink messages in queue stats The context is supposed to record the next queue to dump, not last dumped. If the dump doesn't fit we will restart from the already-dumped queue, duplicating the message. Before this fix and with the selftest improvements later in this series we see: # ./run_kselftest.sh -t drivers/net:stats.py timeout set to 45 selftests: drivers/net: stats.py KTAP version 1 1..5 ok 1 stats.check_pause ok 2 stats.check_fec ok 3 stats.pkt_byte_sum # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])), # Check failed 45 != 44 repeated queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1, # Check failed 45 != 44 missing queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])), # Check failed 45 != 44 repeated queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1, # Check failed 45 != 44 missing queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])), # Check failed 103 != 100 repeated queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1, # Check failed 103 != 100 missing queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])), # Check failed 102 != 100 repeated queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1, # Check failed 102 != 100 missing queue keys not ok 4 stats.qstat_by_ifindex ok 5 stats.check_down # Totals: pass:4 fail:1 xfail:0 xpass:0 skip:0 error:0 With the fix: # ./ksft-net-drv/run_kselftest.sh -t drivers/net:stats.py timeout set to 45 selftests: drivers/net: stats.py KTAP version 1 1..5 ok 1 stats.check_pause ok 2 stats.check_fec ok 3 stats.pkt_byte_sum ok 4 stats.qstat_by_ifindex ok 5 stats.check_down # Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0 Fixes: ab63a2387cb9 ("netdev: add per-queue statistics") Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20241213152244.3080955-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-13 07:22:41 -08:00
netdev: add per-queue statistics The ethtool-nl family does a good job exposing various protocol related and IEEE/IETF statistics which used to get dumped under ethtool -S, with creative names. Queue stats don't have a netlink API, yet, and remain a lion's share of ethtool -S output for new drivers. Not only is that bad because the names differ driver to driver but it's also bug-prone. Intuitively drivers try to report only the stats for active queues, but querying ethtool stats involves multiple system calls, and the number of stats is read separately from the stats themselves. Worse still when user space asks for values of the stats, it doesn't inform the kernel how big the buffer is. If number of stats increases in the meantime kernel will overflow user buffer. Add a netlink API for dumping queue stats. Queue information is exposed via the netdev-genl family, so add the stats there. Support per-queue and sum-for-device dumps. Latter will be useful when subsequent patches add more interesting common stats than just bytes and packets. The API does not currently distinguish between HW and SW stats. The expectation is that the source of the stats will either not matter much (good packets) or be obvious (skb alloc errors). Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06 11:55:07 -08:00
netdev: fix repeated netlink messages in queue stats The context is supposed to record the next queue to dump, not last dumped. If the dump doesn't fit we will restart from the already-dumped queue, duplicating the message. Before this fix and with the selftest improvements later in this series we see: # ./run_kselftest.sh -t drivers/net:stats.py timeout set to 45 selftests: drivers/net: stats.py KTAP version 1 1..5 ok 1 stats.check_pause ok 2 stats.check_fec ok 3 stats.pkt_byte_sum # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])), # Check failed 45 != 44 repeated queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1, # Check failed 45 != 44 missing queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])), # Check failed 45 != 44 repeated queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1, # Check failed 45 != 44 missing queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])), # Check failed 103 != 100 repeated queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1, # Check failed 103 != 100 missing queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])), # Check failed 102 != 100 repeated queue keys # Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex: # Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1, # Check failed 102 != 100 missing queue keys not ok 4 stats.qstat_by_ifindex ok 5 stats.check_down # Totals: pass:4 fail:1 xfail:0 xpass:0 skip:0 error:0 With the fix: # ./ksft-net-drv/run_kselftest.sh -t drivers/net:stats.py timeout set to 45 selftests: drivers/net: stats.py KTAP version 1 1..5 ok 1 stats.check_pause ok 2 stats.check_fec ok 3 stats.pkt_byte_sum ok 4 stats.qstat_by_ifindex ok 5 stats.check_down # Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0 Fixes: ab63a2387cb9 ("netdev: add per-queue statistics") Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20241213152244.3080955-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-13 07:22:41 -08:00
netdev: add per-queue statistics The ethtool-nl family does a good job exposing various protocol related and IEEE/IETF statistics which used to get dumped under ethtool -S, with creative names. Queue stats don't have a netlink API, yet, and remain a lion's share of ethtool -S output for new drivers. Not only is that bad because the names differ driver to driver but it's also bug-prone. Intuitively drivers try to report only the stats for active queues, but querying ethtool stats involves multiple system calls, and the number of stats is read separately from the stats themselves. Worse still when user space asks for values of the stats, it doesn't inform the kernel how big the buffer is. If number of stats increases in the meantime kernel will overflow user buffer. Add a netlink API for dumping queue stats. Queue information is exposed via the netdev-genl family, so add the stats there. Support per-queue and sum-for-device dumps. Latter will be useful when subsequent patches add more interesting common stats than just bytes and packets. The API does not currently distinguish between HW and SW stats. The expectation is that the source of the stats will either not matter much (good packets) or be obvious (skb alloc errors). Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06 11:55:07 -08:00
netdev: add per-queue statistics The ethtool-nl family does a good job exposing various protocol related and IEEE/IETF statistics which used to get dumped under ethtool -S, with creative names. Queue stats don't have a netlink API, yet, and remain a lion's share of ethtool -S output for new drivers. Not only is that bad because the names differ driver to driver but it's also bug-prone. Intuitively drivers try to report only the stats for active queues, but querying ethtool stats involves multiple system calls, and the number of stats is read separately from the stats themselves. Worse still when user space asks for values of the stats, it doesn't inform the kernel how big the buffer is. If number of stats increases in the meantime kernel will overflow user buffer. Add a netlink API for dumping queue stats. Queue information is exposed via the netdev-genl family, so add the stats there. Support per-queue and sum-for-device dumps. Latter will be useful when subsequent patches add more interesting common stats than just bytes and packets. The API does not currently distinguish between HW and SW stats. The expectation is that the source of the stats will either not matter much (good packets) or be obvious (skb alloc errors). Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06 11:55:07 -08:00
netdev: add per-queue statistics The ethtool-nl family does a good job exposing various protocol related and IEEE/IETF statistics which used to get dumped under ethtool -S, with creative names. Queue stats don't have a netlink API, yet, and remain a lion's share of ethtool -S output for new drivers. Not only is that bad because the names differ driver to driver but it's also bug-prone. Intuitively drivers try to report only the stats for active queues, but querying ethtool stats involves multiple system calls, and the number of stats is read separately from the stats themselves. Worse still when user space asks for values of the stats, it doesn't inform the kernel how big the buffer is. If number of stats increases in the meantime kernel will overflow user buffer. Add a netlink API for dumping queue stats. Queue information is exposed via the netdev-genl family, so add the stats there. Support per-queue and sum-for-device dumps. Latter will be useful when subsequent patches add more interesting common stats than just bytes and packets. The API does not currently distinguish between HW and SW stats. The expectation is that the source of the stats will either not matter much (good packets) or be obvious (skb alloc errors). Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06 11:55:07 -08:00
netdev: add per-queue statistics The ethtool-nl family does a good job exposing various protocol related and IEEE/IETF statistics which used to get dumped under ethtool -S, with creative names. Queue stats don't have a netlink API, yet, and remain a lion's share of ethtool -S output for new drivers. Not only is that bad because the names differ driver to driver but it's also bug-prone. Intuitively drivers try to report only the stats for active queues, but querying ethtool stats involves multiple system calls, and the number of stats is read separately from the stats themselves. Worse still when user space asks for values of the stats, it doesn't inform the kernel how big the buffer is. If number of stats increases in the meantime kernel will overflow user buffer. Add a netlink API for dumping queue stats. Queue information is exposed via the netdev-genl family, so add the stats there. Support per-queue and sum-for-device dumps. Latter will be useful when subsequent patches add more interesting common stats than just bytes and packets. The API does not currently distinguish between HW and SW stats. The expectation is that the source of the stats will either not matter much (good packets) or be obvious (skb alloc errors). Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06 11:55:07 -08:00
netdev: add per-queue statistics The ethtool-nl family does a good job exposing various protocol related and IEEE/IETF statistics which used to get dumped under ethtool -S, with creative names. Queue stats don't have a netlink API, yet, and remain a lion's share of ethtool -S output for new drivers. Not only is that bad because the names differ driver to driver but it's also bug-prone. Intuitively drivers try to report only the stats for active queues, but querying ethtool stats involves multiple system calls, and the number of stats is read separately from the stats themselves. Worse still when user space asks for values of the stats, it doesn't inform the kernel how big the buffer is. If number of stats increases in the meantime kernel will overflow user buffer. Add a netlink API for dumping queue stats. Queue information is exposed via the netdev-genl family, so add the stats there. Support per-queue and sum-for-device dumps. Latter will be useful when subsequent patches add more interesting common stats than just bytes and packets. The API does not currently distinguish between HW and SW stats. The expectation is that the source of the stats will either not matter much (good packets) or be obvious (skb alloc errors). Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06 11:55:07 -08:00
netdev: support binding dma-buf to netdevice Add a netdev_dmabuf_binding struct which represents the dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to rx queues on the netdevice. On the binding, the dma_buf_attach & dma_buf_map_attachment will occur. The entries in the sg_table from mapping will be inserted into a genpool to make it ready for allocation. The chunks in the genpool are owned by a dmabuf_chunk_owner struct which holds the dma-buf offset of the base of the chunk and the dma_addr of the chunk. Both are needed to use allocations that come from this chunk. We create a new type that represents an allocation from the genpool: net_iov. We setup the net_iov allocation size in the genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally allocated by the page pool and given to the drivers. The user can unbind the dmabuf from the netdevice by closing the netlink socket that established the binding. We do this so that the binding is automatically unbound even if the userspace process crashes. The binding and unbinding leaves an indicator in struct netdev_rx_queue that the given queue is bound, and the binding is actuated by resetting the rx queue using the queue API. The netdev_dmabuf_binding struct is refcounted, and releases its resources only when all the refs are released. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com> Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 17:14:47 +00:00
netdev: support binding dma-buf to netdevice Add a netdev_dmabuf_binding struct which represents the dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to rx queues on the netdevice. On the binding, the dma_buf_attach & dma_buf_map_attachment will occur. The entries in the sg_table from mapping will be inserted into a genpool to make it ready for allocation. The chunks in the genpool are owned by a dmabuf_chunk_owner struct which holds the dma-buf offset of the base of the chunk and the dma_addr of the chunk. Both are needed to use allocations that come from this chunk. We create a new type that represents an allocation from the genpool: net_iov. We setup the net_iov allocation size in the genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally allocated by the page pool and given to the drivers. The user can unbind the dmabuf from the netdevice by closing the netlink socket that established the binding. We do this so that the binding is automatically unbound even if the userspace process crashes. The binding and unbinding leaves an indicator in struct netdev_rx_queue that the given queue is bound, and the binding is actuated by resetting the rx queue using the queue API. The netdev_dmabuf_binding struct is refcounted, and releases its resources only when all the refs are released. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com> Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 17:14:47 +00:00