License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
|
|
|
|
2017-04-18 10:46:11 -03:00
|
|
|
|
2017-04-17 15:23:08 -03:00
|
|
|
|
2017-04-18 12:33:30 -03:00
|
|
|
|
2019-08-30 14:45:20 -03:00
|
|
|
|
2018-04-26 12:26:01 -03:00
|
|
|
|
2019-03-11 07:44:54 -07:00
|
|
|
|
2019-08-29 15:56:40 -03:00
|
|
|
|
2019-08-30 11:11:01 -03:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2010-07-20 14:42:52 -03:00
|
|
|
|
2019-08-22 16:58:29 -03:00
|
|
|
|
2013-09-13 16:28:57 +09:00
|
|
|
|
2019-01-27 13:42:37 +01:00
|
|
|
|
2020-03-25 21:45:32 +09:00
|
|
|
|
2013-04-03 21:26:19 +09:00
|
|
|
|
2019-08-30 15:09:54 -03:00
|
|
|
|
|
|
|
|
|
2017-04-19 21:34:35 -03:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
2015-12-23 02:07:01 +09:00
|
|
|
|
2019-08-22 17:10:08 -03:00
|
|
|
|
2017-04-18 10:57:25 -03:00
|
|
|
|
perf report: Show all sort keys in help output
Show all the supported sort keys in the command line help output, so
that it's not needed to refer to the manpage.
Before:
% perf report -h
...
-s, --sort <key[,key2...]>
sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline, ... Please refer the man page for the complete list.
After:
% perf report -h
...
-s, --sort <key[,key2...]>
sort by key(s): overhead overhead_sys overhead_us overhead_guest_sys overhead_guest_us overhead_children sample period pid comm dso symbol parent cpu ...
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-5-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-9r3uz2ch4izoi1uln3f889co@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-14 15:49:57 -07:00
|
|
|
|
2016-02-24 09:46:46 +01:00
|
|
|
|
2024-05-07 11:35:43 -07:00
|
|
|
|
2018-11-30 21:54:56 +08:00
|
|
|
|
2023-12-12 16:13:14 -08:00
|
|
|
|
2021-03-22 10:57:24 -04:00
|
|
|
|
2019-03-11 07:44:54 -07:00
|
|
|
|
2020-03-25 21:45:32 +09:00
|
|
|
|
|
|
|
|
|
2023-01-10 23:06:39 -08:00
|
|
|
|
2017-04-17 11:39:06 -03:00
|
|
|
|
2019-08-29 16:18:59 -03:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2024-11-05 18:56:49 +08:00
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2010-05-17 16:22:41 -03:00
|
|
|
|
|
|
|
|
|
2016-08-12 20:41:01 -03:00
|
|
|
|
2015-07-18 08:24:53 -07:00
|
|
|
|
2021-12-03 07:50:37 +05:30
|
|
|
|
2014-03-18 11:31:39 +09:00
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:10 +09:00
|
|
|
|
2014-03-18 11:31:39 +09:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2012-12-06 21:48:05 -08:00
|
|
|
|
|
|
|
|
|
2013-04-01 20:35:20 +09:00
|
|
|
|
2021-12-03 07:50:37 +05:30
|
|
|
|
|
|
|
|
|
perf tools: Bind callchains to the first sort dimension column
Currently, the callchains are displayed using a constant left
margin. So depending on the current sort dimension
configuration, callchains may appear to be well attached to the
first sort dimension column field which is mostly the case,
except when the first dimension of sorting is done by comm,
because these are right aligned.
This patch binds the callchain to the first letter in the first
column, whatever type of column it is (dso, comm, symbol).
Before:
0.80% perf [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
| | __fsnotify_parent
After:
0.80% perf [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
| | __fsnotify_parent
Also, for clarity, we don't put anymore the callchain as is but:
- If we have a top level ancestor in the callchain, start it
with a first ascii hook.
Before:
0.80% perf [kernel] [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
[..] [..]
After:
0.80% perf [kernel] [k] __lock_acquire
|
--- __lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
[..] [..]
- Otherwise, if we have several top level ancestors, then
display these like we did before:
1.69% Xorg
|
|--21.21%-- vread_hpet
| 0x7fffd85b46fc
| 0x7fffd85b494d
| 0x7f4fafb4e54d
|
|--15.15%-- exaOffscreenAlloc
|
|--9.09%-- I830WaitLpRing
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-22 23:23:23 +02:00
|
|
|
|
perf c2c: Add report option to show false sharing in adjacent cachelines
Many platforms have feature of adjacent cachelines prefetch, when it is
enabled, for data in RAM of 2 cachelines (2N and 2N+1) granularity, if
one is fetched to cache, the other one could likely be fetched too,
which sort of extends the cacheline size to double, thus the false
sharing could happens in adjacent cachelines.
0Day has captured performance changed related with this [1], and some
commercial software explicitly makes its hot global variables 128 bytes
aligned (2 cache lines) to avoid this kind of extended false sharing.
So add an option "--double-cl" for 'perf c2c report' to show false
sharing in double cache line granularity, which acts just like the
cacheline size is doubled. There is no change to c2c record. The
hardware events of shared cacheline are still per cacheline, and this
option just changes the granularity of how events are grouped and
displayed.
In the 'perf c2c report' output below (will-it-scale's 'pagefault2' case
on old kernel):
----------------------------------------------------------------------
26 31 2 0 0 0 0xffff888103ec6000
----------------------------------------------------------------------
35.48% 50.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff8133148b 1153 66 971 3748 74 [k] get_mem_cgroup_from_mm
6.45% 0.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff813396e4 570 0 1531 879 75 [k] mem_cgroup_charge
25.81% 50.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81331472 949 70 593 3359 74 [k] get_mem_cgroup_from_mm
19.35% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81339686 1352 0 1073 1022 74 [k] mem_cgroup_charge
9.68% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff813396d6 1401 0 863 768 74 [k] mem_cgroup_charge
3.23% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81333106 618 0 804 11 9 [k] uncharge_batch
The offset 0x10 and 0x54 used to displayed in 2 groups, and now they are
listed together to give users a hint of extended false sharing.
[1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/
Committer notes:
Link: https://lore.kernel.org/r/Y+wvVNWqXb70l4uy@feng-clx
Removed -a, leaving just as --double-cl, as this probably is not used so
frequently and perhaps will be even auto-detected if we manage to record
the MSR where this is configured.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Joe Mario <jmario@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230214075823.246414-1-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-14 15:58:23 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-12 11:27:51 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-03 11:22:00 +01:00
|
|
|
|
2016-02-12 11:27:51 -03:00
|
|
|
|
|
|
|
|
|
2010-03-31 11:33:40 -03:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-03-31 11:33:40 -03:00
|
|
|
|
2012-09-06 17:46:56 +02:00
|
|
|
|
2010-03-31 11:33:40 -03:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2010-03-31 11:33:40 -03:00
|
|
|
|
2012-09-06 17:46:56 +02:00
|
|
|
|
2010-03-31 11:33:40 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Incorrect use of snprintf results in SEGV
I have a workload where perf top scribbles over the stack and we SEGV.
What makes it interesting is that an snprintf is causing this.
The workload is a c++ gem that has method names over 3000 characters
long, but snprintf is designed to avoid overrunning buffers. So what
went wrong?
The problem is we assume snprintf returns the number of characters
written:
ret += repsep_snprintf(bf + ret, size - ret, "[%c] ", self->level);
...
ret += repsep_snprintf(bf + ret, size - ret, "%s", self->ms.sym->name);
Unfortunately this is not how snprintf works. snprintf returns the
number of characters that would have been written if there was enough
space. In the above case, if the first snprintf returns a value larger
than size, we pass a negative size into the second snprintf and happily
scribble over the stack. If you have 3000 character c++ methods thats a
lot of stack to trample.
This patch fixes repsep_snprintf by clamping the value at size - 1 which
is the maximum snprintf can write before adding the NULL terminator.
I get the sinking feeling that there are a lot of other uses of snprintf
that have this same bug, we should audit them all.
Cc: David Ahern <dsahern@gmail.com>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/20120307114249.44275ca3@kryten
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-07 11:42:49 +11:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-09-11 14:46:56 +02:00
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2010-03-31 11:33:40 -03:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2013-09-11 14:46:56 +02:00
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2016-06-20 23:58:19 +02:00
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-24 15:23:07 -07:00
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
2016-06-20 23:58:19 +02:00
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Add 'simd' sort field
Add 'simd' sort field to visualize SIMD ops in 'perf report'.
Rows are labeled with the SIMD ISA, and the type of predicate (if any):
- [p] partial predicate
- [e] empty predicate (no elements in the vector being used)
Example with Arm SPE and SVE (Scalable Vector Extension):
#include <arm_sve.h>
double src[1025], dst[1025];
int main(void) {
svfloat64_t vc = svdup_f64(1);
for(;;)
for(int i = 0; i < 1025; i += svcntd())
{
svbool_t pg = svwhilelt_b64(i, 1025);
svfloat64_t vsrc = svld1(pg, &src[i]);
svfloat64_t vdst = svadd_x(pg, vsrc, vc);
svst1(pg, &dst[i], vdst);
}
return 0;
}
... compiled using "gcc-11 -march=armv8-a+sve -O3"
Profiling on a platform that implements FEAT_SVE and FEAT_SPEv1p1:
$ perf record -e arm_spe_0// -- ./a.out
$ perf report --itrace=i1i -s overhead,pid,simd,sym
Overhead Pid:Command Simd Symbol
........ ................ ....... ......................
53.76% 10758:program [.] main
46.14% 10758:program [.] SVE [.] main
0.09% 10758:program [p] SVE [.] main
The report shows 0.09% of the sampled SVE operations use partial
predicates due to src and dst arrays not being multiples of the vector
register lengths.
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman.Khandual@arm.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230320151509.1137462-2-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-20 15:15:08 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
2018-02-06 19:18:13 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-05-15 17:54:28 +02:00
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-05-15 17:54:28 +02:00
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
2014-03-04 11:01:41 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2010-03-31 11:33:40 -03:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 11:01:41 +09:00
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2023-03-20 14:22:35 -07:00
|
|
|
|
|
|
|
|
|
2009-10-02 03:29:58 -03:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
2014-03-04 11:01:41 +09:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2017-02-17 17:17:38 +09:00
|
|
|
|
2024-05-04 14:38:01 -07:00
|
|
|
|
|
|
|
|
|
2009-10-02 03:29:58 -03:00
|
|
|
|
2024-05-04 14:38:01 -07:00
|
|
|
|
|
|
|
|
|
2009-10-02 03:29:58 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2014-03-04 11:01:41 +09:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-20 14:22:35 -07:00
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2023-03-20 14:22:35 -07:00
|
|
|
|
2024-05-04 14:38:01 -07:00
|
|
|
|
2023-03-20 14:22:35 -07:00
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-20 14:22:35 -07:00
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-12-18 14:21:09 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-03-19 13:25:17 -07:00
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-02-19 21:05:31 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Compare symbol name for inlined frames when sorting
Similar to the callstack frame matching, we also have to compare the
symbol name when sorting hist entries. The reason is twofold: On one
hand, multiple inlined functions will use the same symbol start/end
values of the parent, non-inlined symbol.
As such, all of these symbols often end up missing from top-level
report, as they get merged with the non-inlined frame. On the other
hand, multiple different functions may end up inlining the same
function, and we need to aggregate these values properly.
Before:
~~~~~
perf report --stdio --inline -g none
# Children Self Command Shared Object Symbol
# ........ ........ ............ ............. ...................................
#
100.00% 39.69% cpp-inlining cpp-inlining [.] main
100.00% 0.00% cpp-inlining cpp-inlining [.] _start
100.00% 0.00% cpp-inlining libc-2.25.so [.] __libc_start_main
97.03% 0.00% cpp-inlining cpp-inlining [.] std::norm<double> (inlined)
59.53% 4.26% cpp-inlining libm-2.25.so [.] hypot
55.21% 55.08% cpp-inlining libm-2.25.so [.] __hypot_finite
0.52% 0.52% cpp-inlining libm-2.25.so [.] cabs
~~~~~
After:
~~~~~
perf report --stdio --inline -g none
# Children Self Command Shared Object Symbol
# ........ ........ ............ ............. ...................................................................................................................................
#
100.00% 39.69% cpp-inlining cpp-inlining [.] main
100.00% 0.00% cpp-inlining cpp-inlining [.] _start
100.00% 0.00% cpp-inlining libc-2.25.so [.] __libc_start_main
62.57% 0.00% cpp-inlining cpp-inlining [.] std::_Norm_helper<true>::_S_do_it<double> (inlined)
62.57% 0.00% cpp-inlining cpp-inlining [.] std::__complex_abs (inlined)
62.57% 0.00% cpp-inlining cpp-inlining [.] std::abs<double> (inlined)
62.57% 0.00% cpp-inlining cpp-inlining [.] std::norm<double> (inlined)
59.53% 4.26% cpp-inlining libm-2.25.so [.] hypot
55.21% 55.08% cpp-inlining libm-2.25.so [.] __hypot_finite
34.46% 0.00% cpp-inlining cpp-inlining [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)
32.39% 0.00% cpp-inlining cpp-inlining [.] std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined)
32.39% 0.00% cpp-inlining cpp-inlining [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)
12.29% 0.00% cpp-inlining cpp-inlining [.] std::__detail::_Mod<unsigned long, 2147483647ul, 16807ul, 0ul, true, true>::__calc (inlined)
12.29% 0.00% cpp-inlining cpp-inlining [.] std::__detail::__mod<unsigned long, 2147483647ul, 16807ul, 0ul> (inlined)
12.29% 0.00% cpp-inlining cpp-inlining [.] std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>::operator() (inlined)
0.52% 0.52% cpp-inlining libm-2.25.so [.] cabs
~~~~~
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-11-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-09 22:33:04 +02:00
|
|
|
|
2015-06-17 16:41:10 -07:00
|
|
|
|
|
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
2015-06-17 16:41:10 -07:00
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-15 11:01:56 +09:00
|
|
|
|
|
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
2013-12-18 14:21:09 +09:00
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
2013-10-15 11:01:56 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-06-21 10:05:25 -07:00
|
|
|
|
2013-12-18 14:21:10 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-15 11:01:56 +09:00
|
|
|
|
2013-02-06 14:57:15 +09:00
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
|
|
|
|
|
2014-03-04 11:01:41 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2012-12-27 18:11:39 +09:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2017-02-17 17:17:38 +09:00
|
|
|
|
2023-03-20 14:22:35 -07:00
|
|
|
|
|
|
|
|
|
2020-04-15 09:07:44 +02:00
|
|
|
|
|
|
|
|
|
2024-05-04 14:38:01 -07:00
|
|
|
|
2023-04-04 13:59:44 -07:00
|
|
|
|
2020-04-15 09:07:44 +02:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2020-04-15 09:07:44 +02:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
2018-04-26 12:36:37 -03:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
2023-04-04 13:59:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
perf hists: Do column alignment on the format iterator
We were doing column alignment in the format function for each cell,
returning a string padded with spaces so that when the next column is
printed the cursor is at its column alignment.
This ends up needlessly printing trailing spaces, do it at the format
iterator, that is where we know if it is needed, i.e. if there is more
columns to be printed.
This eliminates the need for triming lines when doing a dump using 'P'
in the TUI browser and also produces far saner results with things like
piping 'perf report' to 'less'.
Right now only the formatters for sym->name and the 'locked' column
(perf mem report), that are the ones that end up at the end of lines
in the default 'perf report', 'perf top' and 'perf mem report' tools,
the others will be done in a subsequent patch.
In the end the 'width' parameter for the formatters now mean, in
'printf' terms, the 'precision', where before it was the field 'width'.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-s7iwl2gj23w92l6tibnrcqzr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-11 17:14:13 -03:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
2017-10-09 22:33:01 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf hists: Do column alignment on the format iterator
We were doing column alignment in the format function for each cell,
returning a string padded with spaces so that when the next column is
printed the cursor is at its column alignment.
This ends up needlessly printing trailing spaces, do it at the format
iterator, that is where we know if it is needed, i.e. if there is more
columns to be printed.
This eliminates the need for triming lines when doing a dump using 'P'
in the TUI browser and also produces far saner results with things like
piping 'perf report' to 'less'.
Right now only the formatters for sym->name and the 'locked' column
(perf mem report), that are the ones that end up at the end of lines
in the default 'perf report', 'perf top' and 'perf mem report' tools,
the others will be done in a subsequent patch.
In the end the 'width' parameter for the formatters now mean, in
'printf' terms, the 'precision', where before it was the field 'width'.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-s7iwl2gj23w92l6tibnrcqzr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-11 17:14:13 -03:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2019-12-12 11:48:23 -03:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 11:01:41 +09:00
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2023-12-12 16:13:19 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-05-30 10:33:24 -03:00
|
|
|
|
|
|
|
|
|
2018-05-28 11:06:58 -03:00
|
|
|
|
2016-02-22 09:31:51 +09:00
|
|
|
|
2018-05-28 11:05:20 -03:00
|
|
|
|
2016-02-22 09:31:51 +09:00
|
|
|
|
|
|
|
|
|
2012-05-30 10:33:24 -03:00
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:15 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-05-30 10:33:24 -03:00
|
|
|
|
2016-02-22 09:31:51 +09:00
|
|
|
|
2018-05-28 11:06:58 -03:00
|
|
|
|
2016-02-22 09:31:51 +09:00
|
|
|
|
2018-05-28 11:06:58 -03:00
|
|
|
|
2016-02-22 09:31:51 +09:00
|
|
|
|
2014-03-04 11:01:41 +09:00
|
|
|
|
2012-05-30 10:33:24 -03:00
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:15 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-05-30 10:33:24 -03:00
|
|
|
|
2016-02-22 09:31:51 +09:00
|
|
|
|
2018-05-28 11:06:58 -03:00
|
|
|
|
2022-12-15 11:28:15 -08:00
|
|
|
|
2016-02-22 09:31:51 +09:00
|
|
|
|
2022-12-15 11:28:15 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-22 09:32:33 +09:00
|
|
|
|
2012-05-30 10:33:24 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:15 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-05-30 10:33:24 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-20 13:15:08 -07:00
|
|
|
|
|
|
|
|
|
2018-05-28 11:11:47 -03:00
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2018-05-28 11:11:47 -03:00
|
|
|
|
|
|
|
|
|
2016-05-20 13:15:08 -07:00
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:17 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-20 13:15:08 -07:00
|
|
|
|
2018-05-28 11:11:47 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-20 13:15:08 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:17 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-20 13:15:08 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:17 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-20 13:15:08 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:17 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-20 13:15:08 -07:00
|
|
|
|
2018-05-28 11:11:47 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-20 13:15:08 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:17 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-20 13:15:08 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:17 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-20 13:15:08 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-30 21:54:56 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-11-03 12:19:04 -07:00
|
|
|
|
2018-11-30 21:54:56 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-11-03 12:19:04 -07:00
|
|
|
|
2018-11-30 21:54:56 +08:00
|
|
|
|
2023-11-03 12:19:04 -07:00
|
|
|
|
|
|
|
|
|
2018-11-30 21:54:56 +08:00
|
|
|
|
2023-11-03 12:19:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-30 21:54:56 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-10-10 13:40:46 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-08-07 15:54:24 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-22 09:31:51 +09:00
|
|
|
|
2015-08-07 15:54:24 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-22 09:31:51 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-20 14:22:35 -07:00
|
|
|
|
2017-12-30 00:26:52 +08:00
|
|
|
|
2023-06-12 11:10:46 -03:00
|
|
|
|
2015-08-11 06:36:55 -07:00
|
|
|
|
2015-08-07 15:54:24 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-22 19:50:05 -07:00
|
|
|
|
2015-08-07 15:54:24 -07:00
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:16 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-08-07 15:54:24 -07:00
|
|
|
|
2016-02-22 09:31:51 +09:00
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:16 -08:00
|
|
|
|
2016-02-22 09:31:51 +09:00
|
|
|
|
2022-12-15 11:28:16 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-22 09:32:33 +09:00
|
|
|
|
2015-08-07 15:54:24 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:16 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-08-07 15:54:24 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 11:01:41 +09:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2010-03-31 11:33:40 -03:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-06-04 11:27:10 -03:00
|
|
|
|
|
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
2010-06-04 11:27:10 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
|
|
|
|
|
2010-06-04 11:27:10 -03:00
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2010-06-04 11:27:10 -03:00
|
|
|
|
|
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add 'cgroup_id' sort order keyword
This patch introduces a cgroup identifier entry field in perf report to
identify or distinguish data of different cgroups. It uses the device
number and inode number of cgroup namespace, included in perf data with
the new PERF_RECORD_NAMESPACES event, as cgroup identifier.
With the assumption that each container is created with it's own cgroup
namespace, this allows assessment/analysis of multiple containers at
once.
A simple test for this would be to clone a few processes passing
SIGCHILD & CLONE_NEWCROUP flags to each of them, execute shell and run
different workloads on each of those contexts, while running perf
record command with --namespaces option.
Shown below is the output of perf report, sorted with cgroup identifier,
on perf.data generated with the above test scenario, clearly indicating
one context's considerable use of kernel memory in comparison with
others:
$ perf report -s cgroup_id,sample --stdio
#
# Total Lost Samples: 0
#
# Samples: 5K of event 'kmem:kmalloc'
# Event count (approx.): 5965
#
# Overhead cgroup id (dev/inode) Samples
# ........ ..................... ............
#
81.27% 3/0xeffffffb 4848
16.24% 3/0xf00000d0 969
1.16% 3/0xf00000ce 69
0.82% 3/0xf00000cf 49
0.50% 0/0x0 30
While this is a start, there is further scope of improving this. For
example, instead of cgroup namespace's device and inode numbers, dev
and inode numbers of some or all namespaces may be used to distinguish
which processes are running in a given container context.
Also, scripts to map device and inode info to containers sounds
plausible for better tracing of containers.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891933338.25309.756882900782042645.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 02:12:13 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-03-25 21:45:32 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf maps: Add functions to access maps
Introduce functions to access struct maps. These functions reduce the
number of places reference counting is necessary. While tidying APIs do
some small const-ification, in particlar to unwind_libunwind_ops.
Committer notes:
Fixed up tools/perf/util/unwind-libunwind.c:
- return ops->get_entries(cb, arg, thread, data, max_stack);
+ return ops->get_entries(cb, arg, thread, data, max_stack, best_effort);
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20230320212248.1175731-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-20 14:22:34 -07:00
|
|
|
|
2020-03-25 21:45:32 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-09-04 10:45:43 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-09-04 10:45:43 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
2015-09-04 10:45:43 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-11 07:44:54 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-23 14:03:37 -07:00
|
|
|
|
|
|
|
|
|
2019-03-11 07:44:54 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:04 +09:00
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2015-12-23 02:07:04 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2018-08-08 14:02:47 -04:00
|
|
|
|
2015-12-23 02:07:04 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-11-18 14:53:43 -08:00
|
|
|
|
2015-12-23 02:07:04 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-11-18 14:53:43 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:05 +09:00
|
|
|
|
2024-11-18 14:53:43 -08:00
|
|
|
|
2016-08-05 12:37:21 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:04 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2015-12-23 02:07:04 +09:00
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:29 +02:00
|
|
|
|
2015-12-23 02:07:04 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2015-12-23 02:07:04 +09:00
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:29 +02:00
|
|
|
|
2016-02-22 09:32:33 +09:00
|
|
|
|
2015-12-23 02:07:04 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-22 09:32:33 +09:00
|
|
|
|
2015-12-23 02:07:04 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2015-12-23 02:07:04 +09:00
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-10-16 16:07:07 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2014-10-16 16:07:07 +02:00
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2014-10-16 16:07:07 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2023-03-20 14:22:35 -07:00
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-10-16 16:07:06 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2014-10-16 16:07:06 +02:00
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2014-10-16 16:07:06 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2023-03-20 14:22:35 -07:00
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-04-13 14:46:39 +02:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2014-10-16 16:07:05 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2013-12-18 14:21:09 +09:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-10-16 16:07:04 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2013-12-18 14:21:09 +09:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2012-12-27 18:11:39 +09:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2014-10-16 16:07:05 +02:00
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
perf report: Print al_addr when symbol is not found
For branch mode, if the symbol is not found, it prints
the address.
For example, 0x0000555eee0365a0 in below output.
Overhead Command Source Shared Object Source Symbol Target Symbol
17.55% div libc-2.27.so [.] __random [.] __random
6.11% div div [.] 0x0000555eee0365a0 [.] rand
6.10% div libc-2.27.so [.] rand [.] 0x0000555eee036769
5.80% div libc-2.27.so [.] __random_r [.] __random
5.72% div libc-2.27.so [.] __random [.] __random_r
5.62% div libc-2.27.so [.] __random_r [.] __random_r
5.38% div libc-2.27.so [.] __random [.] rand
4.56% div libc-2.27.so [.] __random [.] __random
4.49% div div [.] 0x0000555eee036779 [.] 0x0000555eee0365ff
4.25% div div [.] 0x0000555eee0365fa [.] 0x0000555eee036760
But it's not very easy to understand what the instructions
are in the binary. So this patch uses the al_addr instead.
With this patch, the output is
Overhead Command Source Shared Object Source Symbol Target Symbol
17.55% div libc-2.27.so [.] __random [.] __random
6.11% div div [.] 0x00000000000005a0 [.] rand
6.10% div libc-2.27.so [.] rand [.] 0x0000000000000769
5.80% div libc-2.27.so [.] __random_r [.] __random
5.72% div libc-2.27.so [.] __random [.] __random_r
5.62% div libc-2.27.so [.] __random_r [.] __random_r
5.38% div libc-2.27.so [.] __random [.] rand
4.56% div libc-2.27.so [.] __random [.] __random
4.49% div div [.] 0x0000000000000779 [.] 0x00000000000005ff
4.25% div div [.] 0x00000000000005fa [.] 0x0000000000000760
Now we can use objdump to dump the object starting from 0x5a0.
For example,
objdump -d --start-address 0x5a0 div
00000000000005a0 <rand@plt>:
5a0: ff 25 2a 0a 20 00 jmpq *0x200a2a(%rip) # 200fd0 <__cxa_finalize@plt+0x200a20>
5a6: 68 02 00 00 00 pushq $0x2
5ab: e9 c0 ff ff ff jmpq 570 <srand@plt-0x10>
...
Committer testing:
[root@seventh ~]# perf record -a -b sleep 1
[root@seventh ~]# perf report --header-only | grep cpudesc
# cpudesc : Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz
[root@seventh ~]# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY
[root@seventh ~]#
Before:
[root@seventh ~]# perf report --stdio --dso libsystemd-shared-241.so | head -20
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 2K of event 'cycles'
# Event count (approx.): 2240
#
# Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles
# ........ ............... ........................ ...................... ...................... ..................
#
0.13% systemd-journal libc-2.29.so [.] cfree@GLIBC_2.2.5 [.] _int_free 1
0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465c82 [.] 0x00007fe406465d80 1
0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465ded [.] 0x00007fe406465c30 1
0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465e4e [.] 0x00007fe406465de0 1
0.09% systemd-journal systemd-journald [.] free@plt [.] cfree@GLIBC_2.2.5 1
0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 18
0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 2
0.04% systemd libsystemd-shared-241.so [.] bus_resolve@plt [.] bus_resolve 204
0.04% systemd libsystemd-shared-241.so [.] getpid_cached@plt [.] getpid_cached 7
[root@seventh ~]#
After:
[root@seventh ~]# perf report --stdio --dso libsystemd-shared-241.so | head -20
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 2K of event 'cycles'
# Event count (approx.): 2240
#
# Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles
# ........ ............... ........................ ...................... ...................... ..................
#
0.13% systemd-journal libc-2.29.so [.] cfree@GLIBC_2.2.5 [.] _int_free 1
0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7c82 [.] 0x00000000000f7d80 1
0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7ded [.] 0x00000000000f7c30 1
0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7e4e [.] 0x00000000000f7de0 1
0.09% systemd-journal systemd-journald [.] free@plt [.] cfree@GLIBC_2.2.5 1
0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 18
0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 2
0.04% systemd libsystemd-shared-241.so [.] bus_resolve@plt [.] bus_resolve 204
0.04% systemd libsystemd-shared-241.so [.] getpid_cached@plt [.] getpid_cached 7
[root@seventh ~]#
Lets use -v to get full paths and then try objdump on the unresolved address:
[root@seventh ~]# perf report -v --stdio --dso libsystemd-shared-241.so |& grep libsystemd-shared-241.so | tail -1
0.04% systemd-journal /usr/lib/systemd/libsystemd-shared-241.so 0x80c1a B [.] 0x0000000000080c1a 0x80a95 B [.] 0x0000000000080a95 61
[root@seventh ~]#
[root@seventh ~]# objdump -d --start-address 0x00000000000f7d80 /usr/lib/systemd/libsystemd-shared-241.so | head -20
/usr/lib/systemd/libsystemd-shared-241.so: file format elf64-x86-64
Disassembly of section .text:
00000000000f7d80 <proc_cmdline_parse_given@@SD_SHARED+0x330>:
f7d80: 41 39 11 cmp %edx,(%r9)
f7d83: 0f 84 ff fe ff ff je f7c88 <proc_cmdline_parse_given@@SD_SHARED+0x238>
f7d89: 4c 8d 05 97 09 0c 00 lea 0xc0997(%rip),%r8 # 1b8727 <utf8_skip_data@@SD_SHARED+0x3147>
f7d90: b9 49 00 00 00 mov $0x49,%ecx
f7d95: 48 8d 15 c9 f5 0b 00 lea 0xbf5c9(%rip),%rdx # 1b7365 <utf8_skip_data@@SD_SHARED+0x1d85>
f7d9c: 31 ff xor %edi,%edi
f7d9e: 48 8d 35 9b ff 0b 00 lea 0xbff9b(%rip),%rsi # 1b7d40 <utf8_skip_data@@SD_SHARED+0x2760>
f7da5: e8 a6 d6 f4 ff callq 45450 <log_assert_failed_realm@plt>
f7daa: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
f7db0: 41 56 push %r14
f7db2: 41 55 push %r13
f7db4: 41 54 push %r12
f7db6: 55 push %rbp
[root@seventh ~]#
If we tried the the reported address before this patch:
[root@seventh ~]# objdump -d --start-address 0x00007fe406465d80 /usr/lib/systemd/libsystemd-shared-241.so | head -20
/usr/lib/systemd/libsystemd-shared-241.so: file format elf64-x86-64
[root@seventh ~]#
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200227043939.4403-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27 12:39:37 +08:00
|
|
|
|
2022-01-26 10:59:26 +00:00
|
|
|
|
2014-10-16 16:07:05 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2012-12-27 18:11:39 +09:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2014-10-16 16:07:04 +02:00
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
perf report: Print al_addr when symbol is not found
For branch mode, if the symbol is not found, it prints
the address.
For example, 0x0000555eee0365a0 in below output.
Overhead Command Source Shared Object Source Symbol Target Symbol
17.55% div libc-2.27.so [.] __random [.] __random
6.11% div div [.] 0x0000555eee0365a0 [.] rand
6.10% div libc-2.27.so [.] rand [.] 0x0000555eee036769
5.80% div libc-2.27.so [.] __random_r [.] __random
5.72% div libc-2.27.so [.] __random [.] __random_r
5.62% div libc-2.27.so [.] __random_r [.] __random_r
5.38% div libc-2.27.so [.] __random [.] rand
4.56% div libc-2.27.so [.] __random [.] __random
4.49% div div [.] 0x0000555eee036779 [.] 0x0000555eee0365ff
4.25% div div [.] 0x0000555eee0365fa [.] 0x0000555eee036760
But it's not very easy to understand what the instructions
are in the binary. So this patch uses the al_addr instead.
With this patch, the output is
Overhead Command Source Shared Object Source Symbol Target Symbol
17.55% div libc-2.27.so [.] __random [.] __random
6.11% div div [.] 0x00000000000005a0 [.] rand
6.10% div libc-2.27.so [.] rand [.] 0x0000000000000769
5.80% div libc-2.27.so [.] __random_r [.] __random
5.72% div libc-2.27.so [.] __random [.] __random_r
5.62% div libc-2.27.so [.] __random_r [.] __random_r
5.38% div libc-2.27.so [.] __random [.] rand
4.56% div libc-2.27.so [.] __random [.] __random
4.49% div div [.] 0x0000000000000779 [.] 0x00000000000005ff
4.25% div div [.] 0x00000000000005fa [.] 0x0000000000000760
Now we can use objdump to dump the object starting from 0x5a0.
For example,
objdump -d --start-address 0x5a0 div
00000000000005a0 <rand@plt>:
5a0: ff 25 2a 0a 20 00 jmpq *0x200a2a(%rip) # 200fd0 <__cxa_finalize@plt+0x200a20>
5a6: 68 02 00 00 00 pushq $0x2
5ab: e9 c0 ff ff ff jmpq 570 <srand@plt-0x10>
...
Committer testing:
[root@seventh ~]# perf record -a -b sleep 1
[root@seventh ~]# perf report --header-only | grep cpudesc
# cpudesc : Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz
[root@seventh ~]# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY
[root@seventh ~]#
Before:
[root@seventh ~]# perf report --stdio --dso libsystemd-shared-241.so | head -20
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 2K of event 'cycles'
# Event count (approx.): 2240
#
# Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles
# ........ ............... ........................ ...................... ...................... ..................
#
0.13% systemd-journal libc-2.29.so [.] cfree@GLIBC_2.2.5 [.] _int_free 1
0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465c82 [.] 0x00007fe406465d80 1
0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465ded [.] 0x00007fe406465c30 1
0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465e4e [.] 0x00007fe406465de0 1
0.09% systemd-journal systemd-journald [.] free@plt [.] cfree@GLIBC_2.2.5 1
0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 18
0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 2
0.04% systemd libsystemd-shared-241.so [.] bus_resolve@plt [.] bus_resolve 204
0.04% systemd libsystemd-shared-241.so [.] getpid_cached@plt [.] getpid_cached 7
[root@seventh ~]#
After:
[root@seventh ~]# perf report --stdio --dso libsystemd-shared-241.so | head -20
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 2K of event 'cycles'
# Event count (approx.): 2240
#
# Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles
# ........ ............... ........................ ...................... ...................... ..................
#
0.13% systemd-journal libc-2.29.so [.] cfree@GLIBC_2.2.5 [.] _int_free 1
0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7c82 [.] 0x00000000000f7d80 1
0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7ded [.] 0x00000000000f7c30 1
0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7e4e [.] 0x00000000000f7de0 1
0.09% systemd-journal systemd-journald [.] free@plt [.] cfree@GLIBC_2.2.5 1
0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 18
0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 2
0.04% systemd libsystemd-shared-241.so [.] bus_resolve@plt [.] bus_resolve 204
0.04% systemd libsystemd-shared-241.so [.] getpid_cached@plt [.] getpid_cached 7
[root@seventh ~]#
Lets use -v to get full paths and then try objdump on the unresolved address:
[root@seventh ~]# perf report -v --stdio --dso libsystemd-shared-241.so |& grep libsystemd-shared-241.so | tail -1
0.04% systemd-journal /usr/lib/systemd/libsystemd-shared-241.so 0x80c1a B [.] 0x0000000000080c1a 0x80a95 B [.] 0x0000000000080a95 61
[root@seventh ~]#
[root@seventh ~]# objdump -d --start-address 0x00000000000f7d80 /usr/lib/systemd/libsystemd-shared-241.so | head -20
/usr/lib/systemd/libsystemd-shared-241.so: file format elf64-x86-64
Disassembly of section .text:
00000000000f7d80 <proc_cmdline_parse_given@@SD_SHARED+0x330>:
f7d80: 41 39 11 cmp %edx,(%r9)
f7d83: 0f 84 ff fe ff ff je f7c88 <proc_cmdline_parse_given@@SD_SHARED+0x238>
f7d89: 4c 8d 05 97 09 0c 00 lea 0xc0997(%rip),%r8 # 1b8727 <utf8_skip_data@@SD_SHARED+0x3147>
f7d90: b9 49 00 00 00 mov $0x49,%ecx
f7d95: 48 8d 15 c9 f5 0b 00 lea 0xbf5c9(%rip),%rdx # 1b7365 <utf8_skip_data@@SD_SHARED+0x1d85>
f7d9c: 31 ff xor %edi,%edi
f7d9e: 48 8d 35 9b ff 0b 00 lea 0xbff9b(%rip),%rsi # 1b7d40 <utf8_skip_data@@SD_SHARED+0x2760>
f7da5: e8 a6 d6 f4 ff callq 45450 <log_assert_failed_realm@plt>
f7daa: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
f7db0: 41 56 push %r14
f7db2: 41 55 push %r13
f7db4: 41 54 push %r12
f7db6: 55 push %rbp
[root@seventh ~]#
If we tried the the reported address before this patch:
[root@seventh ~]# objdump -d --start-address 0x00007fe406465d80 /usr/lib/systemd/libsystemd-shared-241.so | head -20
/usr/lib/systemd/libsystemd-shared-241.so: file format elf64-x86-64
[root@seventh ~]#
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200227043939.4403-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27 12:39:37 +08:00
|
|
|
|
2022-01-26 10:59:26 +00:00
|
|
|
|
2014-10-16 16:07:04 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
2012-12-27 18:11:38 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Add "addr_from" and "addr_to" sort dimensions
With the existing symbol_from/symbol_to, branches captured in the same
function would be collapsed into a single function if the latencies
associated with the each branch (cycles) were all the same. That is the
case on Intel Broadwell, for instance. Since Intel Skylake, the latency
is captured by hardware and therefore is used to disambiguate branches.
Add addr_from/addr_to sort dimensions to sort branches based on their
addresses and not the function there are in. The output is still the
function name but the offset within the function is provided to uniquely
identify each branch. These new sort dimensions also help with annotate
because they create different entries in the histogram which, in turn,
generates proper branch annotations.
Here is an example using AMD's branch sampling:
$ perf record -a -b -c 1000037 -e cpu/branch-brs/ test_prg
$ perf report
Samples: 6M of event 'cpu/branch-brs/', Event count (approx.): 6901276
Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycle
99.65% test_prg test_prg [.] test_thread [.] test_thread -
0.02% test_prg [kernel.vmlinux] [k] asm_sysvec_apic_timer_interrupt [k] error_entry -
$ perf report -F overhead,comm,dso,addr_from,addr_to
Samples: 6M of event 'cpu/branch-brs/', Event count (approx.): 6901276
Overhead Command Shared Object Source Address Target Address
4.22% test_prg test_prg [.] test_thread+0x3c [.] test_thread+0x4
4.13% test_prg test_prg [.] test_thread+0x4 [.] test_thread+0x3a
4.09% test_prg test_prg [.] test_thread+0x3a [.] test_thread+0x6
4.08% test_prg test_prg [.] test_thread+0x2 [.] test_thread+0x3c
4.06% test_prg test_prg [.] test_thread+0x3e [.] test_thread+0x2
3.87% test_prg test_prg [.] test_thread+0x6 [.] test_thread+0x38
3.84% test_prg test_prg [.] test_thread [.] test_thread+0x3e
3.76% test_prg test_prg [.] test_thread+0x1e [.] test_thread
3.76% test_prg test_prg [.] test_thread+0x38 [.] test_thread+0x8
3.56% test_prg test_prg [.] test_thread+0x22 [.] test_thread+0x1e
3.54% test_prg test_prg [.] test_thread+0x8 [.] test_thread+0x36
3.47% test_prg test_prg [.] test_thread+0x1c [.] test_thread+0x22
3.45% test_prg test_prg [.] test_thread+0x36 [.] test_thread+0xa
3.28% test_prg test_prg [.] test_thread+0x24 [.] test_thread+0x1c
3.25% test_prg test_prg [.] test_thread+0xa [.] test_thread+0x34
3.24% test_prg test_prg [.] test_thread+0x1a [.] test_thread+0x24
3.20% test_prg test_prg [.] test_thread+0x34 [.] test_thread+0xc
3.04% test_prg test_prg [.] test_thread+0x26 [.] test_thread+0x1a
3.01% test_prg test_prg [.] test_thread+0xc [.] test_thread+0x32
2.98% test_prg test_prg [.] test_thread+0x18 [.] test_thread+0x26
2.94% test_prg test_prg [.] test_thread+0x32 [.] test_thread+0xe
2.76% test_prg test_prg [.] test_thread+0x28 [.] test_thread+0x18
2.73% test_prg test_prg [.] test_thread+0xe [.] test_thread+0x30
2.67% test_prg test_prg [.] test_thread+0x30 [.] test_thread+0x10
2.67% test_prg test_prg [.] test_thread+0x16 [.] test_thread+0x28
2.46% test_prg test_prg [.] test_thread+0x10 [.] test_thread+0x2e
2.44% test_prg test_prg [.] test_thread+0x2a [.] test_thread+0x16
2.38% test_prg test_prg [.] test_thread+0x14 [.] test_thread+0x2a
2.32% test_prg test_prg [.] test_thread+0x2e [.] test_thread+0x12
2.28% test_prg test_prg [.] test_thread+0x12 [.] test_thread+0x2c
2.16% test_prg test_prg [.] test_thread+0x2c [.] test_thread+0x14
0.02% test_prg [kernel.vmlinux] [k] asm_sysvec_apic_ti+0x5 [k] error_entry
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20220208211637.2221872-13-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-08 13:16:37 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-04-04 13:59:44 -07:00
|
|
|
|
perf report: Add "addr_from" and "addr_to" sort dimensions
With the existing symbol_from/symbol_to, branches captured in the same
function would be collapsed into a single function if the latencies
associated with the each branch (cycles) were all the same. That is the
case on Intel Broadwell, for instance. Since Intel Skylake, the latency
is captured by hardware and therefore is used to disambiguate branches.
Add addr_from/addr_to sort dimensions to sort branches based on their
addresses and not the function there are in. The output is still the
function name but the offset within the function is provided to uniquely
identify each branch. These new sort dimensions also help with annotate
because they create different entries in the histogram which, in turn,
generates proper branch annotations.
Here is an example using AMD's branch sampling:
$ perf record -a -b -c 1000037 -e cpu/branch-brs/ test_prg
$ perf report
Samples: 6M of event 'cpu/branch-brs/', Event count (approx.): 6901276
Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycle
99.65% test_prg test_prg [.] test_thread [.] test_thread -
0.02% test_prg [kernel.vmlinux] [k] asm_sysvec_apic_timer_interrupt [k] error_entry -
$ perf report -F overhead,comm,dso,addr_from,addr_to
Samples: 6M of event 'cpu/branch-brs/', Event count (approx.): 6901276
Overhead Command Shared Object Source Address Target Address
4.22% test_prg test_prg [.] test_thread+0x3c [.] test_thread+0x4
4.13% test_prg test_prg [.] test_thread+0x4 [.] test_thread+0x3a
4.09% test_prg test_prg [.] test_thread+0x3a [.] test_thread+0x6
4.08% test_prg test_prg [.] test_thread+0x2 [.] test_thread+0x3c
4.06% test_prg test_prg [.] test_thread+0x3e [.] test_thread+0x2
3.87% test_prg test_prg [.] test_thread+0x6 [.] test_thread+0x38
3.84% test_prg test_prg [.] test_thread [.] test_thread+0x3e
3.76% test_prg test_prg [.] test_thread+0x1e [.] test_thread
3.76% test_prg test_prg [.] test_thread+0x38 [.] test_thread+0x8
3.56% test_prg test_prg [.] test_thread+0x22 [.] test_thread+0x1e
3.54% test_prg test_prg [.] test_thread+0x8 [.] test_thread+0x36
3.47% test_prg test_prg [.] test_thread+0x1c [.] test_thread+0x22
3.45% test_prg test_prg [.] test_thread+0x36 [.] test_thread+0xa
3.28% test_prg test_prg [.] test_thread+0x24 [.] test_thread+0x1c
3.25% test_prg test_prg [.] test_thread+0xa [.] test_thread+0x34
3.24% test_prg test_prg [.] test_thread+0x1a [.] test_thread+0x24
3.20% test_prg test_prg [.] test_thread+0x34 [.] test_thread+0xc
3.04% test_prg test_prg [.] test_thread+0x26 [.] test_thread+0x1a
3.01% test_prg test_prg [.] test_thread+0xc [.] test_thread+0x32
2.98% test_prg test_prg [.] test_thread+0x18 [.] test_thread+0x26
2.94% test_prg test_prg [.] test_thread+0x32 [.] test_thread+0xe
2.76% test_prg test_prg [.] test_thread+0x28 [.] test_thread+0x18
2.73% test_prg test_prg [.] test_thread+0xe [.] test_thread+0x30
2.67% test_prg test_prg [.] test_thread+0x30 [.] test_thread+0x10
2.67% test_prg test_prg [.] test_thread+0x16 [.] test_thread+0x28
2.46% test_prg test_prg [.] test_thread+0x10 [.] test_thread+0x2e
2.44% test_prg test_prg [.] test_thread+0x2a [.] test_thread+0x16
2.38% test_prg test_prg [.] test_thread+0x14 [.] test_thread+0x2a
2.32% test_prg test_prg [.] test_thread+0x2e [.] test_thread+0x12
2.28% test_prg test_prg [.] test_thread+0x12 [.] test_thread+0x2c
2.16% test_prg test_prg [.] test_thread+0x2c [.] test_thread+0x14
0.02% test_prg [kernel.vmlinux] [k] asm_sysvec_apic_ti+0x5 [k] error_entry
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20220208211637.2221872-13-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-08 13:16:37 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-10-16 16:07:03 +02:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2014-10-16 16:07:03 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-10-16 16:07:03 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2015-07-18 08:24:46 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-03-13 16:31:48 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-07-18 08:24:46 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-03-13 16:31:48 +08:00
|
|
|
|
|
|
|
|
|
2015-07-18 08:24:46 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
2016-09-22 17:36:34 +02:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
|
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
2016-09-22 17:36:34 +02:00
|
|
|
|
2015-10-05 20:06:07 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2015-10-05 20:06:07 +02:00
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2015-10-05 20:06:07 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2015-10-05 20:06:07 +02:00
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
|
|
|
|
|
2015-10-05 20:06:07 +02:00
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2015-10-05 20:06:07 +02:00
|
|
|
|
|
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
2016-02-24 09:46:49 +01:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
2016-02-24 09:46:49 +01:00
|
|
|
|
perf hists: Do column alignment on the format iterator
We were doing column alignment in the format function for each cell,
returning a string padded with spaces so that when the next column is
printed the cursor is at its column alignment.
This ends up needlessly printing trailing spaces, do it at the format
iterator, that is where we know if it is needed, i.e. if there is more
columns to be printed.
This eliminates the need for triming lines when doing a dump using 'P'
in the TUI browser and also produces far saner results with things like
piping 'perf report' to 'less'.
Right now only the formatters for sym->name and the 'locked' column
(perf mem report), that are the ones that end up at the end of lines
in the default 'perf report', 'perf top' and 'perf mem report' tools,
the others will be done in a subsequent patch.
In the end the 'width' parameter for the formatters now mean, in
'printf' terms, the 'precision', where before it was the field 'width'.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-s7iwl2gj23w92l6tibnrcqzr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-11 17:14:13 -03:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-24 09:46:46 +01:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-24 09:46:47 +01:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-24 09:46:48 +01:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-09-22 17:36:34 +02:00
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-20 14:22:35 -07:00
|
|
|
|
2019-11-19 16:30:56 -03:00
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
|
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-20 14:22:35 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-19 16:30:56 -03:00
|
|
|
|
|
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-04 14:38:01 -07:00
|
|
|
|
|
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
|
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2023-04-18 12:46:02 -03:00
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
|
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-04-04 13:59:45 -07:00
|
|
|
|
|
|
|
|
|
2024-05-04 14:38:01 -07:00
|
|
|
|
|
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 15:57:38 -03:00
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-01-24 16:10:29 +01:00
|
|
|
|
perf sort: Fix the 'weight' sort key behavior
Currently, the 'weight' field in the perf sample has latency information
for some instructions like in memory accesses. And perf tool has 'weight'
and 'local_weight' sort keys to display the info.
But it's somewhat confusing what it shows exactly. In my understanding,
'local_weight' shows a weight in a single sample, and (global) 'weight'
shows a sum of the weights in the hist_entry.
For example:
$ perf mem record -t load dd if=/dev/zero of=/dev/null bs=4k count=1M
$ perf report --stdio -n -s +local_weight
...
#
# Overhead Samples Command Shared Object Symbol Local Weight
# ........ ....... ....... ................ ......................... ............
#
21.23% 313 dd [kernel.vmlinux] [k] lockref_get_not_zero 32
12.43% 183 dd [kernel.vmlinux] [k] lockref_get_not_zero 35
11.97% 159 dd [kernel.vmlinux] [k] lockref_get_not_zero 36
10.40% 141 dd [kernel.vmlinux] [k] lockref_put_return 32
7.63% 113 dd [kernel.vmlinux] [k] lockref_get_not_zero 33
6.37% 92 dd [kernel.vmlinux] [k] lockref_get_not_zero 34
6.15% 90 dd [kernel.vmlinux] [k] lockref_put_return 33
...
So let's look at the 'lockref_get_not_zero' symbols. The top entry
shows that 313 samples were captured with 'local_weight' 32, so the
total weight should be 313 x 32 = 10016. But it's not the case:
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ ......
#
1.36% 4 dd [kernel.vmlinux] 36 144
0.47% 4 dd [kernel.vmlinux] 37 148
0.42% 4 dd [kernel.vmlinux] 32 128
0.40% 4 dd [kernel.vmlinux] 34 136
0.35% 4 dd [kernel.vmlinux] 36 144
0.34% 4 dd [kernel.vmlinux] 35 140
0.30% 4 dd [kernel.vmlinux] 36 144
0.30% 4 dd [kernel.vmlinux] 34 136
0.30% 4 dd [kernel.vmlinux] 32 128
0.30% 4 dd [kernel.vmlinux] 32 128
...
With the 'weight' sort key, it's divided to 4 samples even with the same
info ('comm', 'dso', 'sym' and 'local_weight'). I don't think this is
what we want.
I found this because of the way it aggregates the 'weight' value. Since
it's not a period, we should not add them in the he->stat. Otherwise,
two 32 'weight' entries will create a 64 'weight' entry.
After that, new 32 'weight' samples don't have a matching entry so it'd
create a new entry and make it a 64 'weight' entry again and again.
Later, they will be merged into 128 'weight' entries during the
hists__collapse_resort() with 4 samples, multiple times like above.
Let's keep the weight and display it differently. For 'local_weight',
it can show the weight as is, and for (global) 'weight' it can display
the number multiplied by the number of samples.
With this change, I can see the expected numbers.
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ .....
#
21.23% 313 dd [kernel.vmlinux] 32 10016
12.43% 183 dd [kernel.vmlinux] 35 6405
11.97% 159 dd [kernel.vmlinux] 36 5724
7.63% 113 dd [kernel.vmlinux] 33 3729
6.37% 92 dd [kernel.vmlinux] 34 3128
4.17% 59 dd [kernel.vmlinux] 37 2183
0.08% 1 dd [kernel.vmlinux] 269 269
0.08% 1 dd [kernel.vmlinux] 38 38
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-05 15:56:15 -07:00
|
|
|
|
2013-01-24 16:10:29 +01:00
|
|
|
|
perf sort: Fix the 'weight' sort key behavior
Currently, the 'weight' field in the perf sample has latency information
for some instructions like in memory accesses. And perf tool has 'weight'
and 'local_weight' sort keys to display the info.
But it's somewhat confusing what it shows exactly. In my understanding,
'local_weight' shows a weight in a single sample, and (global) 'weight'
shows a sum of the weights in the hist_entry.
For example:
$ perf mem record -t load dd if=/dev/zero of=/dev/null bs=4k count=1M
$ perf report --stdio -n -s +local_weight
...
#
# Overhead Samples Command Shared Object Symbol Local Weight
# ........ ....... ....... ................ ......................... ............
#
21.23% 313 dd [kernel.vmlinux] [k] lockref_get_not_zero 32
12.43% 183 dd [kernel.vmlinux] [k] lockref_get_not_zero 35
11.97% 159 dd [kernel.vmlinux] [k] lockref_get_not_zero 36
10.40% 141 dd [kernel.vmlinux] [k] lockref_put_return 32
7.63% 113 dd [kernel.vmlinux] [k] lockref_get_not_zero 33
6.37% 92 dd [kernel.vmlinux] [k] lockref_get_not_zero 34
6.15% 90 dd [kernel.vmlinux] [k] lockref_put_return 33
...
So let's look at the 'lockref_get_not_zero' symbols. The top entry
shows that 313 samples were captured with 'local_weight' 32, so the
total weight should be 313 x 32 = 10016. But it's not the case:
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ ......
#
1.36% 4 dd [kernel.vmlinux] 36 144
0.47% 4 dd [kernel.vmlinux] 37 148
0.42% 4 dd [kernel.vmlinux] 32 128
0.40% 4 dd [kernel.vmlinux] 34 136
0.35% 4 dd [kernel.vmlinux] 36 144
0.34% 4 dd [kernel.vmlinux] 35 140
0.30% 4 dd [kernel.vmlinux] 36 144
0.30% 4 dd [kernel.vmlinux] 34 136
0.30% 4 dd [kernel.vmlinux] 32 128
0.30% 4 dd [kernel.vmlinux] 32 128
...
With the 'weight' sort key, it's divided to 4 samples even with the same
info ('comm', 'dso', 'sym' and 'local_weight'). I don't think this is
what we want.
I found this because of the way it aggregates the 'weight' value. Since
it's not a period, we should not add them in the he->stat. Otherwise,
two 32 'weight' entries will create a 64 'weight' entry.
After that, new 32 'weight' samples don't have a matching entry so it'd
create a new entry and make it a 64 'weight' entry again and again.
Later, they will be merged into 128 'weight' entries during the
hists__collapse_resort() with 4 samples, multiple times like above.
Let's keep the weight and display it differently. For 'local_weight',
it can show the weight as is, and for (global) 'weight' it can display
the number multiplied by the number of samples.
With this change, I can see the expected numbers.
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ .....
#
21.23% 313 dd [kernel.vmlinux] 32 10016
12.43% 183 dd [kernel.vmlinux] 35 6405
11.97% 159 dd [kernel.vmlinux] 36 5724
7.63% 113 dd [kernel.vmlinux] 33 3729
6.37% 92 dd [kernel.vmlinux] 34 3128
4.17% 59 dd [kernel.vmlinux] 37 2183
0.08% 1 dd [kernel.vmlinux] 269 269
0.08% 1 dd [kernel.vmlinux] 38 38
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-05 15:56:15 -07:00
|
|
|
|
2013-01-24 16:10:29 +01:00
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2013-01-24 16:10:29 +01:00
|
|
|
|
|
|
|
|
|
perf sort: Fix the 'weight' sort key behavior
Currently, the 'weight' field in the perf sample has latency information
for some instructions like in memory accesses. And perf tool has 'weight'
and 'local_weight' sort keys to display the info.
But it's somewhat confusing what it shows exactly. In my understanding,
'local_weight' shows a weight in a single sample, and (global) 'weight'
shows a sum of the weights in the hist_entry.
For example:
$ perf mem record -t load dd if=/dev/zero of=/dev/null bs=4k count=1M
$ perf report --stdio -n -s +local_weight
...
#
# Overhead Samples Command Shared Object Symbol Local Weight
# ........ ....... ....... ................ ......................... ............
#
21.23% 313 dd [kernel.vmlinux] [k] lockref_get_not_zero 32
12.43% 183 dd [kernel.vmlinux] [k] lockref_get_not_zero 35
11.97% 159 dd [kernel.vmlinux] [k] lockref_get_not_zero 36
10.40% 141 dd [kernel.vmlinux] [k] lockref_put_return 32
7.63% 113 dd [kernel.vmlinux] [k] lockref_get_not_zero 33
6.37% 92 dd [kernel.vmlinux] [k] lockref_get_not_zero 34
6.15% 90 dd [kernel.vmlinux] [k] lockref_put_return 33
...
So let's look at the 'lockref_get_not_zero' symbols. The top entry
shows that 313 samples were captured with 'local_weight' 32, so the
total weight should be 313 x 32 = 10016. But it's not the case:
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ ......
#
1.36% 4 dd [kernel.vmlinux] 36 144
0.47% 4 dd [kernel.vmlinux] 37 148
0.42% 4 dd [kernel.vmlinux] 32 128
0.40% 4 dd [kernel.vmlinux] 34 136
0.35% 4 dd [kernel.vmlinux] 36 144
0.34% 4 dd [kernel.vmlinux] 35 140
0.30% 4 dd [kernel.vmlinux] 36 144
0.30% 4 dd [kernel.vmlinux] 34 136
0.30% 4 dd [kernel.vmlinux] 32 128
0.30% 4 dd [kernel.vmlinux] 32 128
...
With the 'weight' sort key, it's divided to 4 samples even with the same
info ('comm', 'dso', 'sym' and 'local_weight'). I don't think this is
what we want.
I found this because of the way it aggregates the 'weight' value. Since
it's not a period, we should not add them in the he->stat. Otherwise,
two 32 'weight' entries will create a 64 'weight' entry.
After that, new 32 'weight' samples don't have a matching entry so it'd
create a new entry and make it a 64 'weight' entry again and again.
Later, they will be merged into 128 'weight' entries during the
hists__collapse_resort() with 4 samples, multiple times like above.
Let's keep the weight and display it differently. For 'local_weight',
it can show the weight as is, and for (global) 'weight' it can display
the number multiplied by the number of samples.
With this change, I can see the expected numbers.
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ .....
#
21.23% 313 dd [kernel.vmlinux] 32 10016
12.43% 183 dd [kernel.vmlinux] 35 6405
11.97% 159 dd [kernel.vmlinux] 36 5724
7.63% 113 dd [kernel.vmlinux] 33 3729
6.37% 92 dd [kernel.vmlinux] 34 3128
4.17% 59 dd [kernel.vmlinux] 37 2183
0.08% 1 dd [kernel.vmlinux] 269 269
0.08% 1 dd [kernel.vmlinux] 38 38
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-05 15:56:15 -07:00
|
|
|
|
2013-01-24 16:10:29 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sort: Fix the 'weight' sort key behavior
Currently, the 'weight' field in the perf sample has latency information
for some instructions like in memory accesses. And perf tool has 'weight'
and 'local_weight' sort keys to display the info.
But it's somewhat confusing what it shows exactly. In my understanding,
'local_weight' shows a weight in a single sample, and (global) 'weight'
shows a sum of the weights in the hist_entry.
For example:
$ perf mem record -t load dd if=/dev/zero of=/dev/null bs=4k count=1M
$ perf report --stdio -n -s +local_weight
...
#
# Overhead Samples Command Shared Object Symbol Local Weight
# ........ ....... ....... ................ ......................... ............
#
21.23% 313 dd [kernel.vmlinux] [k] lockref_get_not_zero 32
12.43% 183 dd [kernel.vmlinux] [k] lockref_get_not_zero 35
11.97% 159 dd [kernel.vmlinux] [k] lockref_get_not_zero 36
10.40% 141 dd [kernel.vmlinux] [k] lockref_put_return 32
7.63% 113 dd [kernel.vmlinux] [k] lockref_get_not_zero 33
6.37% 92 dd [kernel.vmlinux] [k] lockref_get_not_zero 34
6.15% 90 dd [kernel.vmlinux] [k] lockref_put_return 33
...
So let's look at the 'lockref_get_not_zero' symbols. The top entry
shows that 313 samples were captured with 'local_weight' 32, so the
total weight should be 313 x 32 = 10016. But it's not the case:
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ ......
#
1.36% 4 dd [kernel.vmlinux] 36 144
0.47% 4 dd [kernel.vmlinux] 37 148
0.42% 4 dd [kernel.vmlinux] 32 128
0.40% 4 dd [kernel.vmlinux] 34 136
0.35% 4 dd [kernel.vmlinux] 36 144
0.34% 4 dd [kernel.vmlinux] 35 140
0.30% 4 dd [kernel.vmlinux] 36 144
0.30% 4 dd [kernel.vmlinux] 34 136
0.30% 4 dd [kernel.vmlinux] 32 128
0.30% 4 dd [kernel.vmlinux] 32 128
...
With the 'weight' sort key, it's divided to 4 samples even with the same
info ('comm', 'dso', 'sym' and 'local_weight'). I don't think this is
what we want.
I found this because of the way it aggregates the 'weight' value. Since
it's not a period, we should not add them in the he->stat. Otherwise,
two 32 'weight' entries will create a 64 'weight' entry.
After that, new 32 'weight' samples don't have a matching entry so it'd
create a new entry and make it a 64 'weight' entry again and again.
Later, they will be merged into 128 'weight' entries during the
hists__collapse_resort() with 4 samples, multiple times like above.
Let's keep the weight and display it differently. For 'local_weight',
it can show the weight as is, and for (global) 'weight' it can display
the number multiplied by the number of samples.
With this change, I can see the expected numbers.
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ .....
#
21.23% 313 dd [kernel.vmlinux] 32 10016
12.43% 183 dd [kernel.vmlinux] 35 6405
11.97% 159 dd [kernel.vmlinux] 36 5724
7.63% 113 dd [kernel.vmlinux] 33 3729
6.37% 92 dd [kernel.vmlinux] 34 3128
4.17% 59 dd [kernel.vmlinux] 37 2183
0.08% 1 dd [kernel.vmlinux] 269 269
0.08% 1 dd [kernel.vmlinux] 38 38
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-05 15:56:15 -07:00
|
|
|
|
2013-01-24 16:10:29 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2013-01-24 16:10:29 +01:00
|
|
|
|
|
|
|
|
|
perf sort: Fix the 'weight' sort key behavior
Currently, the 'weight' field in the perf sample has latency information
for some instructions like in memory accesses. And perf tool has 'weight'
and 'local_weight' sort keys to display the info.
But it's somewhat confusing what it shows exactly. In my understanding,
'local_weight' shows a weight in a single sample, and (global) 'weight'
shows a sum of the weights in the hist_entry.
For example:
$ perf mem record -t load dd if=/dev/zero of=/dev/null bs=4k count=1M
$ perf report --stdio -n -s +local_weight
...
#
# Overhead Samples Command Shared Object Symbol Local Weight
# ........ ....... ....... ................ ......................... ............
#
21.23% 313 dd [kernel.vmlinux] [k] lockref_get_not_zero 32
12.43% 183 dd [kernel.vmlinux] [k] lockref_get_not_zero 35
11.97% 159 dd [kernel.vmlinux] [k] lockref_get_not_zero 36
10.40% 141 dd [kernel.vmlinux] [k] lockref_put_return 32
7.63% 113 dd [kernel.vmlinux] [k] lockref_get_not_zero 33
6.37% 92 dd [kernel.vmlinux] [k] lockref_get_not_zero 34
6.15% 90 dd [kernel.vmlinux] [k] lockref_put_return 33
...
So let's look at the 'lockref_get_not_zero' symbols. The top entry
shows that 313 samples were captured with 'local_weight' 32, so the
total weight should be 313 x 32 = 10016. But it's not the case:
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ ......
#
1.36% 4 dd [kernel.vmlinux] 36 144
0.47% 4 dd [kernel.vmlinux] 37 148
0.42% 4 dd [kernel.vmlinux] 32 128
0.40% 4 dd [kernel.vmlinux] 34 136
0.35% 4 dd [kernel.vmlinux] 36 144
0.34% 4 dd [kernel.vmlinux] 35 140
0.30% 4 dd [kernel.vmlinux] 36 144
0.30% 4 dd [kernel.vmlinux] 34 136
0.30% 4 dd [kernel.vmlinux] 32 128
0.30% 4 dd [kernel.vmlinux] 32 128
...
With the 'weight' sort key, it's divided to 4 samples even with the same
info ('comm', 'dso', 'sym' and 'local_weight'). I don't think this is
what we want.
I found this because of the way it aggregates the 'weight' value. Since
it's not a period, we should not add them in the he->stat. Otherwise,
two 32 'weight' entries will create a 64 'weight' entry.
After that, new 32 'weight' samples don't have a matching entry so it'd
create a new entry and make it a 64 'weight' entry again and again.
Later, they will be merged into 128 'weight' entries during the
hists__collapse_resort() with 4 samples, multiple times like above.
Let's keep the weight and display it differently. For 'local_weight',
it can show the weight as is, and for (global) 'weight' it can display
the number multiplied by the number of samples.
With this change, I can see the expected numbers.
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ .....
#
21.23% 313 dd [kernel.vmlinux] 32 10016
12.43% 183 dd [kernel.vmlinux] 35 6405
11.97% 159 dd [kernel.vmlinux] 36 5724
7.63% 113 dd [kernel.vmlinux] 33 3729
6.37% 92 dd [kernel.vmlinux] 34 3128
4.17% 59 dd [kernel.vmlinux] 37 2183
0.08% 1 dd [kernel.vmlinux] 269 269
0.08% 1 dd [kernel.vmlinux] 38 38
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-05 15:56:15 -07:00
|
|
|
|
|
|
|
|
|
2013-01-24 16:10:29 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sort: Fix the 'weight' sort key behavior
Currently, the 'weight' field in the perf sample has latency information
for some instructions like in memory accesses. And perf tool has 'weight'
and 'local_weight' sort keys to display the info.
But it's somewhat confusing what it shows exactly. In my understanding,
'local_weight' shows a weight in a single sample, and (global) 'weight'
shows a sum of the weights in the hist_entry.
For example:
$ perf mem record -t load dd if=/dev/zero of=/dev/null bs=4k count=1M
$ perf report --stdio -n -s +local_weight
...
#
# Overhead Samples Command Shared Object Symbol Local Weight
# ........ ....... ....... ................ ......................... ............
#
21.23% 313 dd [kernel.vmlinux] [k] lockref_get_not_zero 32
12.43% 183 dd [kernel.vmlinux] [k] lockref_get_not_zero 35
11.97% 159 dd [kernel.vmlinux] [k] lockref_get_not_zero 36
10.40% 141 dd [kernel.vmlinux] [k] lockref_put_return 32
7.63% 113 dd [kernel.vmlinux] [k] lockref_get_not_zero 33
6.37% 92 dd [kernel.vmlinux] [k] lockref_get_not_zero 34
6.15% 90 dd [kernel.vmlinux] [k] lockref_put_return 33
...
So let's look at the 'lockref_get_not_zero' symbols. The top entry
shows that 313 samples were captured with 'local_weight' 32, so the
total weight should be 313 x 32 = 10016. But it's not the case:
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ ......
#
1.36% 4 dd [kernel.vmlinux] 36 144
0.47% 4 dd [kernel.vmlinux] 37 148
0.42% 4 dd [kernel.vmlinux] 32 128
0.40% 4 dd [kernel.vmlinux] 34 136
0.35% 4 dd [kernel.vmlinux] 36 144
0.34% 4 dd [kernel.vmlinux] 35 140
0.30% 4 dd [kernel.vmlinux] 36 144
0.30% 4 dd [kernel.vmlinux] 34 136
0.30% 4 dd [kernel.vmlinux] 32 128
0.30% 4 dd [kernel.vmlinux] 32 128
...
With the 'weight' sort key, it's divided to 4 samples even with the same
info ('comm', 'dso', 'sym' and 'local_weight'). I don't think this is
what we want.
I found this because of the way it aggregates the 'weight' value. Since
it's not a period, we should not add them in the he->stat. Otherwise,
two 32 'weight' entries will create a 64 'weight' entry.
After that, new 32 'weight' samples don't have a matching entry so it'd
create a new entry and make it a 64 'weight' entry again and again.
Later, they will be merged into 128 'weight' entries during the
hists__collapse_resort() with 4 samples, multiple times like above.
Let's keep the weight and display it differently. For 'local_weight',
it can show the weight as is, and for (global) 'weight' it can display
the number multiplied by the number of samples.
With this change, I can see the expected numbers.
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ .....
#
21.23% 313 dd [kernel.vmlinux] 32 10016
12.43% 183 dd [kernel.vmlinux] 35 6405
11.97% 159 dd [kernel.vmlinux] 36 5724
7.63% 113 dd [kernel.vmlinux] 33 3729
6.37% 92 dd [kernel.vmlinux] 34 3128
4.17% 59 dd [kernel.vmlinux] 37 2183
0.08% 1 dd [kernel.vmlinux] 269 269
0.08% 1 dd [kernel.vmlinux] 38 38
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-05 15:56:15 -07:00
|
|
|
|
2013-01-24 16:10:29 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-02-02 12:09:10 -08:00
|
|
|
|
2021-11-05 15:56:16 -07:00
|
|
|
|
2021-02-02 12:09:10 -08:00
|
|
|
|
2021-11-05 15:56:16 -07:00
|
|
|
|
2021-02-02 12:09:10 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-11-05 15:56:16 -07:00
|
|
|
|
2021-02-02 12:09:10 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-11-05 15:56:16 -07:00
|
|
|
|
2021-02-02 12:09:10 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-11-05 15:56:16 -07:00
|
|
|
|
|
|
|
|
|
2021-02-02 12:09:10 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-11-05 15:56:16 -07:00
|
|
|
|
2021-02-02 12:09:10 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-03-22 10:57:26 -04:00
|
|
|
|
2021-12-03 07:50:37 +05:30
|
|
|
|
2021-03-22 10:57:26 -04:00
|
|
|
|
2021-11-05 15:56:17 -07:00
|
|
|
|
2021-03-22 10:57:26 -04:00
|
|
|
|
|
|
|
|
|
2021-12-03 07:50:37 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-03-22 10:57:26 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-11-05 15:56:17 -07:00
|
|
|
|
2021-03-22 10:57:26 -04:00
|
|
|
|
|
|
|
|
|
2021-12-03 07:50:37 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-03-22 10:57:26 -04:00
|
|
|
|
2021-12-03 07:50:37 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-03-22 10:57:26 -04:00
|
|
|
|
|
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-10-05 20:06:07 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-06-14 20:19:12 +02:00
|
|
|
|
2013-01-24 16:10:35 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Support data block and addr block
Two new data source fields, to indicate the block reasons of a load
instruction, are introduced on the Intel Sapphire Rapids server. The
fields can be used by the memory profiling.
Add a new sort function, SORT_MEM_BLOCKED, for the two fields.
For the previous platforms or the block reason is unknown, print "N/A"
for the block reason.
Add blocked as a default mem sort key for perf report and perf mem
report.
Committer testing:
So in machines without this capability we get a "N/A" filling the new "Blocked"
column:
$ perf mem record ls
arch certs CREDITS Documentation include ipc Kconfig lib MAINTAINERS mm samples security usr block
COPYING crypto drivers fs init Kbuild kernel LICENSES Makefile net README scripts sound tools
virt
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data (17 samples) ]
$
$ perf mem report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 6 of event 'cpu/mem-loads,ldlat=30/Pu'
# Total weight : 1381
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ .................... ....................... ............. ...................... ............ ..... ............ ...... .......
#
32.87% 1 454 Local RAM or RAM hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91cef3078 libc-2.31.so Hit L1 or L2 hit No N/A
25.56% 1 353 LFB or LFB hit [.] strcmp ld-2.31.so [.] 0x00005586973855ca ls None L1 or L2 hit No N/A
22.59% 1 312 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0e3b18 ld.so.cache None L1 or L2 hit No N/A
8.47% 1 117 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceee570 libc-2.31.so None L1 or L2 hit No N/A
6.88% 1 95 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceed490 libc-2.31.so None L1 or L2 hit No N/A
3.62% 1 50 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0ebe60 ld.so.cache None L1 or L2 hit No N/A
# Samples: 11 of event 'cpu/mem-stores/Pu'
# Total weight : 11
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ ............. ....................... ............. ...................... ........... ..... .......... ...... .......
#
9.09% 1 0 L1 hit [.] __strcoll_l libc-2.31.so [.] 0x00007fffe5648fc8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_lookup_symbol_x ld-2.31.so [.] 0x00007fffe56490b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_name_match_p ld-2.31.so [.] 0x00007fffe56487d8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_start ld-2.31.so [.] start_time+0x0 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_sysdep_start ld-2.31.so [.] 0x00007fffe56494b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5648ff8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649064 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649130 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xaf8 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xc28 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] 0x00007fffe56495b8 [stack] N/A N/A N/A N/A
# (Tip: Show user configuration overrides: perf config --user --list)
$
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/1612296553-21962-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-02 12:09:07 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
perf tools: Support data block and addr block
Two new data source fields, to indicate the block reasons of a load
instruction, are introduced on the Intel Sapphire Rapids server. The
fields can be used by the memory profiling.
Add a new sort function, SORT_MEM_BLOCKED, for the two fields.
For the previous platforms or the block reason is unknown, print "N/A"
for the block reason.
Add blocked as a default mem sort key for perf report and perf mem
report.
Committer testing:
So in machines without this capability we get a "N/A" filling the new "Blocked"
column:
$ perf mem record ls
arch certs CREDITS Documentation include ipc Kconfig lib MAINTAINERS mm samples security usr block
COPYING crypto drivers fs init Kbuild kernel LICENSES Makefile net README scripts sound tools
virt
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data (17 samples) ]
$
$ perf mem report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 6 of event 'cpu/mem-loads,ldlat=30/Pu'
# Total weight : 1381
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ .................... ....................... ............. ...................... ............ ..... ............ ...... .......
#
32.87% 1 454 Local RAM or RAM hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91cef3078 libc-2.31.so Hit L1 or L2 hit No N/A
25.56% 1 353 LFB or LFB hit [.] strcmp ld-2.31.so [.] 0x00005586973855ca ls None L1 or L2 hit No N/A
22.59% 1 312 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0e3b18 ld.so.cache None L1 or L2 hit No N/A
8.47% 1 117 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceee570 libc-2.31.so None L1 or L2 hit No N/A
6.88% 1 95 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceed490 libc-2.31.so None L1 or L2 hit No N/A
3.62% 1 50 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0ebe60 ld.so.cache None L1 or L2 hit No N/A
# Samples: 11 of event 'cpu/mem-stores/Pu'
# Total weight : 11
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ ............. ....................... ............. ...................... ........... ..... .......... ...... .......
#
9.09% 1 0 L1 hit [.] __strcoll_l libc-2.31.so [.] 0x00007fffe5648fc8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_lookup_symbol_x ld-2.31.so [.] 0x00007fffe56490b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_name_match_p ld-2.31.so [.] 0x00007fffe56487d8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_start ld-2.31.so [.] start_time+0x0 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_sysdep_start ld-2.31.so [.] 0x00007fffe56494b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5648ff8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649064 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649130 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xaf8 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xc28 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] 0x00007fffe56495b8 [stack] N/A N/A N/A N/A
# (Tip: Show user configuration overrides: perf config --user --list)
$
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/1612296553-21962-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-02 12:09:07 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
perf tools: Support data block and addr block
Two new data source fields, to indicate the block reasons of a load
instruction, are introduced on the Intel Sapphire Rapids server. The
fields can be used by the memory profiling.
Add a new sort function, SORT_MEM_BLOCKED, for the two fields.
For the previous platforms or the block reason is unknown, print "N/A"
for the block reason.
Add blocked as a default mem sort key for perf report and perf mem
report.
Committer testing:
So in machines without this capability we get a "N/A" filling the new "Blocked"
column:
$ perf mem record ls
arch certs CREDITS Documentation include ipc Kconfig lib MAINTAINERS mm samples security usr block
COPYING crypto drivers fs init Kbuild kernel LICENSES Makefile net README scripts sound tools
virt
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data (17 samples) ]
$
$ perf mem report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 6 of event 'cpu/mem-loads,ldlat=30/Pu'
# Total weight : 1381
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ .................... ....................... ............. ...................... ............ ..... ............ ...... .......
#
32.87% 1 454 Local RAM or RAM hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91cef3078 libc-2.31.so Hit L1 or L2 hit No N/A
25.56% 1 353 LFB or LFB hit [.] strcmp ld-2.31.so [.] 0x00005586973855ca ls None L1 or L2 hit No N/A
22.59% 1 312 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0e3b18 ld.so.cache None L1 or L2 hit No N/A
8.47% 1 117 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceee570 libc-2.31.so None L1 or L2 hit No N/A
6.88% 1 95 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceed490 libc-2.31.so None L1 or L2 hit No N/A
3.62% 1 50 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0ebe60 ld.so.cache None L1 or L2 hit No N/A
# Samples: 11 of event 'cpu/mem-stores/Pu'
# Total weight : 11
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ ............. ....................... ............. ...................... ........... ..... .......... ...... .......
#
9.09% 1 0 L1 hit [.] __strcoll_l libc-2.31.so [.] 0x00007fffe5648fc8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_lookup_symbol_x ld-2.31.so [.] 0x00007fffe56490b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_name_match_p ld-2.31.so [.] 0x00007fffe56487d8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_start ld-2.31.so [.] start_time+0x0 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_sysdep_start ld-2.31.so [.] 0x00007fffe56494b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5648ff8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649064 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649130 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xaf8 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xc28 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] 0x00007fffe56495b8 [stack] N/A N/A N/A N/A
# (Tip: Show user configuration overrides: perf config --user --list)
$
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/1612296553-21962-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-02 12:09:07 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-08-29 13:11:09 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2017-08-29 13:11:09 -04:00
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2017-08-29 13:11:09 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2017-08-29 13:11:09 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-12-16 10:57:58 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2020-12-16 10:57:58 -08:00
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2020-12-16 10:57:58 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-07 11:35:44 -07:00
|
|
|
|
2020-12-16 10:57:58 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-01-05 11:57:51 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-09-20 07:40:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-10-16 16:07:01 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-09-20 07:40:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2013-09-20 07:40:41 -07:00
|
|
|
|
|
|
|
|
|
2014-10-16 16:07:01 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-09-20 07:40:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-10-16 16:07:02 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-09-20 07:40:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2013-09-20 07:40:41 -07:00
|
|
|
|
|
|
|
|
|
2014-10-16 16:07:02 +02:00
|
|
|
|
2013-09-20 07:40:41 -07:00
|
|
|
|
2014-10-16 16:07:02 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-09-20 07:40:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-09-20 07:40:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2013-09-20 07:40:43 -07:00
|
|
|
|
|
|
|
|
|
2013-10-22 19:01:31 -03:00
|
|
|
|
2013-09-20 07:40:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-02-24 13:32:56 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-03-27 06:09:56 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-20 14:22:35 -07:00
|
|
|
|
|
|
|
|
|
2018-03-27 06:09:56 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-12-12 16:13:14 -08:00
|
|
|
|
2022-09-23 10:31:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-04-04 13:59:44 -07:00
|
|
|
|
2022-09-23 10:31:41 -07:00
|
|
|
|
2023-04-04 13:59:44 -07:00
|
|
|
|
2022-09-23 10:31:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-04-04 13:59:44 -07:00
|
|
|
|
2022-09-23 10:31:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-12-12 16:13:14 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-12-12 16:13:16 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-12-12 16:13:14 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Add 'typeoff' sort key
The typeoff sort key shows the data type name, offset and the name of
the field. This is useful to see which field in the struct is accessed
most frequently.
$ perf report -s type,typeoff --hierarchy --stdio
...
# Overhead Data Type / Data Type Offset
# ............ ............................
#
...
1.23% struct cfs_rq
0.19% struct cfs_rq +404 (throttle_count)
0.19% struct cfs_rq +0 (load.weight)
0.19% struct cfs_rq +336 (leaf_cfs_rq_list.next)
0.09% struct cfs_rq +272 (propagate)
0.09% struct cfs_rq +196 (removed.nr)
0.09% struct cfs_rq +80 (curr)
0.09% struct cfs_rq +544 (lt_b_children_throttled)
0.06% struct cfs_rq +320 (rq)
Committer testing:
Again with the perf.data from the previous csets:
# perf report --stdio -s type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Data Type Data Type Offset
# ........ ......... ................
#
42.86% struct list_head struct list_head +8 (prev)
42.86% (unknown) (unknown) +0 (no field)
14.29% char char +0 (no field)
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
# perf report --stdio -s dso,type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Shared Object Data Type Data Type Offset
# ........ .................... ......... ................
#
42.86% [kernel.kallsyms] struct list_head struct list_head +8 (prev)
28.57% libc.so.6 (unknown) (unknown) +0 (no field)
14.29% [kernel.kallsyms] char char +0 (no field)
14.29% ld-linux-x86-64.so.2 (unknown) (unknown) +0 (no field)
#
# (Tip: If you have debuginfo enabled, try: perf report -s sym,srcline)
#
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-12 16:13:18 -08:00
|
|
|
|
2023-12-12 16:13:14 -08:00
|
|
|
|
perf report: Add 'typeoff' sort key
The typeoff sort key shows the data type name, offset and the name of
the field. This is useful to see which field in the struct is accessed
most frequently.
$ perf report -s type,typeoff --hierarchy --stdio
...
# Overhead Data Type / Data Type Offset
# ............ ............................
#
...
1.23% struct cfs_rq
0.19% struct cfs_rq +404 (throttle_count)
0.19% struct cfs_rq +0 (load.weight)
0.19% struct cfs_rq +336 (leaf_cfs_rq_list.next)
0.09% struct cfs_rq +272 (propagate)
0.09% struct cfs_rq +196 (removed.nr)
0.09% struct cfs_rq +80 (curr)
0.09% struct cfs_rq +544 (lt_b_children_throttled)
0.06% struct cfs_rq +320 (rq)
Committer testing:
Again with the perf.data from the previous csets:
# perf report --stdio -s type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Data Type Data Type Offset
# ........ ......... ................
#
42.86% struct list_head struct list_head +8 (prev)
42.86% (unknown) (unknown) +0 (no field)
14.29% char char +0 (no field)
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
# perf report --stdio -s dso,type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Shared Object Data Type Data Type Offset
# ........ .................... ......... ................
#
42.86% [kernel.kallsyms] struct list_head struct list_head +8 (prev)
28.57% libc.so.6 (unknown) (unknown) +0 (no field)
14.29% [kernel.kallsyms] char char +0 (no field)
14.29% ld-linux-x86-64.so.2 (unknown) (unknown) +0 (no field)
#
# (Tip: If you have debuginfo enabled, try: perf report -s sym,srcline)
#
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-12 16:13:18 -08:00
|
|
|
|
|
|
|
|
|
2023-12-12 16:13:14 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-12-12 16:13:16 -08:00
|
|
|
|
2023-12-12 16:13:14 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-12-12 16:13:16 -08:00
|
|
|
|
2023-12-12 16:13:14 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Add 'typeoff' sort key
The typeoff sort key shows the data type name, offset and the name of
the field. This is useful to see which field in the struct is accessed
most frequently.
$ perf report -s type,typeoff --hierarchy --stdio
...
# Overhead Data Type / Data Type Offset
# ............ ............................
#
...
1.23% struct cfs_rq
0.19% struct cfs_rq +404 (throttle_count)
0.19% struct cfs_rq +0 (load.weight)
0.19% struct cfs_rq +336 (leaf_cfs_rq_list.next)
0.09% struct cfs_rq +272 (propagate)
0.09% struct cfs_rq +196 (removed.nr)
0.09% struct cfs_rq +80 (curr)
0.09% struct cfs_rq +544 (lt_b_children_throttled)
0.06% struct cfs_rq +320 (rq)
Committer testing:
Again with the perf.data from the previous csets:
# perf report --stdio -s type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Data Type Data Type Offset
# ........ ......... ................
#
42.86% struct list_head struct list_head +8 (prev)
42.86% (unknown) (unknown) +0 (no field)
14.29% char char +0 (no field)
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
# perf report --stdio -s dso,type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Shared Object Data Type Data Type Offset
# ........ .................... ......... ................
#
42.86% [kernel.kallsyms] struct list_head struct list_head +8 (prev)
28.57% libc.so.6 (unknown) (unknown) +0 (no field)
14.29% [kernel.kallsyms] char char +0 (no field)
14.29% ld-linux-x86-64.so.2 (unknown) (unknown) +0 (no field)
#
# (Tip: If you have debuginfo enabled, try: perf report -s sym,srcline)
#
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-12 16:13:18 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-19 16:36:02 -07:00
|
|
|
|
perf report: Add 'typeoff' sort key
The typeoff sort key shows the data type name, offset and the name of
the field. This is useful to see which field in the struct is accessed
most frequently.
$ perf report -s type,typeoff --hierarchy --stdio
...
# Overhead Data Type / Data Type Offset
# ............ ............................
#
...
1.23% struct cfs_rq
0.19% struct cfs_rq +404 (throttle_count)
0.19% struct cfs_rq +0 (load.weight)
0.19% struct cfs_rq +336 (leaf_cfs_rq_list.next)
0.09% struct cfs_rq +272 (propagate)
0.09% struct cfs_rq +196 (removed.nr)
0.09% struct cfs_rq +80 (curr)
0.09% struct cfs_rq +544 (lt_b_children_throttled)
0.06% struct cfs_rq +320 (rq)
Committer testing:
Again with the perf.data from the previous csets:
# perf report --stdio -s type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Data Type Data Type Offset
# ........ ......... ................
#
42.86% struct list_head struct list_head +8 (prev)
42.86% (unknown) (unknown) +0 (no field)
14.29% char char +0 (no field)
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
# perf report --stdio -s dso,type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Shared Object Data Type Data Type Offset
# ........ .................... ......... ................
#
42.86% [kernel.kallsyms] struct list_head struct list_head +8 (prev)
28.57% libc.so.6 (unknown) (unknown) +0 (no field)
14.29% [kernel.kallsyms] char char +0 (no field)
14.29% ld-linux-x86-64.so.2 (unknown) (unknown) +0 (no field)
#
# (Tip: If you have debuginfo enabled, try: perf report -s sym,srcline)
#
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-12 16:13:18 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-19 16:36:03 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-02-24 13:32:56 +00:00
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-03-22 10:57:27 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-03-22 10:57:24 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
2012-12-27 18:11:46 +09:00
|
|
|
|
2012-02-09 23:21:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-09-04 10:45:43 -04:00
|
|
|
|
2012-05-30 10:33:24 -03:00
|
|
|
|
2015-08-07 15:54:24 -07:00
|
|
|
|
2013-07-18 15:58:53 -07:00
|
|
|
|
|
|
|
|
|
2013-09-20 07:40:43 -07:00
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2015-12-23 02:07:04 +09:00
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2017-02-24 13:32:56 +00:00
|
|
|
|
2018-03-27 06:09:56 -05:00
|
|
|
|
2020-03-25 21:45:32 +09:00
|
|
|
|
perf tools: Add 'cgroup_id' sort order keyword
This patch introduces a cgroup identifier entry field in perf report to
identify or distinguish data of different cgroups. It uses the device
number and inode number of cgroup namespace, included in perf data with
the new PERF_RECORD_NAMESPACES event, as cgroup identifier.
With the assumption that each container is created with it's own cgroup
namespace, this allows assessment/analysis of multiple containers at
once.
A simple test for this would be to clone a few processes passing
SIGCHILD & CLONE_NEWCROUP flags to each of them, execute shell and run
different workloads on each of those contexts, while running perf
record command with --namespaces option.
Shown below is the output of perf report, sorted with cgroup identifier,
on perf.data generated with the above test scenario, clearly indicating
one context's considerable use of kernel memory in comparison with
others:
$ perf report -s cgroup_id,sample --stdio
#
# Total Lost Samples: 0
#
# Samples: 5K of event 'kmem:kmalloc'
# Event count (approx.): 5965
#
# Overhead cgroup id (dev/inode) Samples
# ........ ..................... ............
#
81.27% 3/0xeffffffb 4848
16.24% 3/0xf00000d0 969
1.16% 3/0xf00000ce 69
0.82% 3/0xf00000cf 49
0.50% 0/0x0 30
While this is a start, there is further scope of improving this. For
example, instead of cgroup namespace's device and inode numbers, dev
and inode numbers of some or all namespaces may be used to distinguish
which processes are running in a given container context.
Also, scripts to map device and inode info to containers sounds
plausible for better tracing of containers.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891933338.25309.756882900782042645.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 02:12:13 +05:30
|
|
|
|
2018-11-30 21:54:56 +08:00
|
|
|
|
2019-03-11 07:44:54 -07:00
|
|
|
|
2021-01-05 11:57:51 -08:00
|
|
|
|
2021-02-02 12:09:10 -08:00
|
|
|
|
|
|
|
|
|
2021-12-03 07:50:37 +05:30
|
|
|
|
|
|
|
|
|
2022-09-23 10:31:41 -07:00
|
|
|
|
2023-01-04 12:13:48 -08:00
|
|
|
|
|
|
|
|
|
2023-12-12 16:13:14 -08:00
|
|
|
|
|
|
|
|
|
perf report: Add 'typeoff' sort key
The typeoff sort key shows the data type name, offset and the name of
the field. This is useful to see which field in the struct is accessed
most frequently.
$ perf report -s type,typeoff --hierarchy --stdio
...
# Overhead Data Type / Data Type Offset
# ............ ............................
#
...
1.23% struct cfs_rq
0.19% struct cfs_rq +404 (throttle_count)
0.19% struct cfs_rq +0 (load.weight)
0.19% struct cfs_rq +336 (leaf_cfs_rq_list.next)
0.09% struct cfs_rq +272 (propagate)
0.09% struct cfs_rq +196 (removed.nr)
0.09% struct cfs_rq +80 (curr)
0.09% struct cfs_rq +544 (lt_b_children_throttled)
0.06% struct cfs_rq +320 (rq)
Committer testing:
Again with the perf.data from the previous csets:
# perf report --stdio -s type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Data Type Data Type Offset
# ........ ......... ................
#
42.86% struct list_head struct list_head +8 (prev)
42.86% (unknown) (unknown) +0 (no field)
14.29% char char +0 (no field)
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
# perf report --stdio -s dso,type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Shared Object Data Type Data Type Offset
# ........ .................... ......... ................
#
42.86% [kernel.kallsyms] struct list_head struct list_head +8 (prev)
28.57% libc.so.6 (unknown) (unknown) +0 (no field)
14.29% [kernel.kallsyms] char char +0 (no field)
14.29% ld-linux-x86-64.so.2 (unknown) (unknown) +0 (no field)
#
# (Tip: If you have debuginfo enabled, try: perf report -s sym,srcline)
#
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-12 16:13:18 -08:00
|
|
|
|
2023-12-12 16:13:19 -08:00
|
|
|
|
2024-08-19 16:36:03 -07:00
|
|
|
|
2011-06-29 03:14:52 +02:00
|
|
|
|
|
|
|
|
|
2012-12-27 18:11:46 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-09-20 07:40:41 -07:00
|
|
|
|
|
|
|
|
|
2015-07-18 08:24:46 -07:00
|
|
|
|
2016-05-20 13:15:08 -07:00
|
|
|
|
|
|
|
|
|
2018-11-30 21:54:56 +08:00
|
|
|
|
perf report: Add "addr_from" and "addr_to" sort dimensions
With the existing symbol_from/symbol_to, branches captured in the same
function would be collapsed into a single function if the latencies
associated with the each branch (cycles) were all the same. That is the
case on Intel Broadwell, for instance. Since Intel Skylake, the latency
is captured by hardware and therefore is used to disambiguate branches.
Add addr_from/addr_to sort dimensions to sort branches based on their
addresses and not the function there are in. The output is still the
function name but the offset within the function is provided to uniquely
identify each branch. These new sort dimensions also help with annotate
because they create different entries in the histogram which, in turn,
generates proper branch annotations.
Here is an example using AMD's branch sampling:
$ perf record -a -b -c 1000037 -e cpu/branch-brs/ test_prg
$ perf report
Samples: 6M of event 'cpu/branch-brs/', Event count (approx.): 6901276
Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycle
99.65% test_prg test_prg [.] test_thread [.] test_thread -
0.02% test_prg [kernel.vmlinux] [k] asm_sysvec_apic_timer_interrupt [k] error_entry -
$ perf report -F overhead,comm,dso,addr_from,addr_to
Samples: 6M of event 'cpu/branch-brs/', Event count (approx.): 6901276
Overhead Command Shared Object Source Address Target Address
4.22% test_prg test_prg [.] test_thread+0x3c [.] test_thread+0x4
4.13% test_prg test_prg [.] test_thread+0x4 [.] test_thread+0x3a
4.09% test_prg test_prg [.] test_thread+0x3a [.] test_thread+0x6
4.08% test_prg test_prg [.] test_thread+0x2 [.] test_thread+0x3c
4.06% test_prg test_prg [.] test_thread+0x3e [.] test_thread+0x2
3.87% test_prg test_prg [.] test_thread+0x6 [.] test_thread+0x38
3.84% test_prg test_prg [.] test_thread [.] test_thread+0x3e
3.76% test_prg test_prg [.] test_thread+0x1e [.] test_thread
3.76% test_prg test_prg [.] test_thread+0x38 [.] test_thread+0x8
3.56% test_prg test_prg [.] test_thread+0x22 [.] test_thread+0x1e
3.54% test_prg test_prg [.] test_thread+0x8 [.] test_thread+0x36
3.47% test_prg test_prg [.] test_thread+0x1c [.] test_thread+0x22
3.45% test_prg test_prg [.] test_thread+0x36 [.] test_thread+0xa
3.28% test_prg test_prg [.] test_thread+0x24 [.] test_thread+0x1c
3.25% test_prg test_prg [.] test_thread+0xa [.] test_thread+0x34
3.24% test_prg test_prg [.] test_thread+0x1a [.] test_thread+0x24
3.20% test_prg test_prg [.] test_thread+0x34 [.] test_thread+0xc
3.04% test_prg test_prg [.] test_thread+0x26 [.] test_thread+0x1a
3.01% test_prg test_prg [.] test_thread+0xc [.] test_thread+0x32
2.98% test_prg test_prg [.] test_thread+0x18 [.] test_thread+0x26
2.94% test_prg test_prg [.] test_thread+0x32 [.] test_thread+0xe
2.76% test_prg test_prg [.] test_thread+0x28 [.] test_thread+0x18
2.73% test_prg test_prg [.] test_thread+0xe [.] test_thread+0x30
2.67% test_prg test_prg [.] test_thread+0x30 [.] test_thread+0x10
2.67% test_prg test_prg [.] test_thread+0x16 [.] test_thread+0x28
2.46% test_prg test_prg [.] test_thread+0x10 [.] test_thread+0x2e
2.44% test_prg test_prg [.] test_thread+0x2a [.] test_thread+0x16
2.38% test_prg test_prg [.] test_thread+0x14 [.] test_thread+0x2a
2.32% test_prg test_prg [.] test_thread+0x2e [.] test_thread+0x12
2.28% test_prg test_prg [.] test_thread+0x12 [.] test_thread+0x2c
2.16% test_prg test_prg [.] test_thread+0x2c [.] test_thread+0x14
0.02% test_prg [kernel.vmlinux] [k] asm_sysvec_apic_ti+0x5 [k] error_entry
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20220208211637.2221872-13-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-08 13:16:37 -08:00
|
|
|
|
|
|
|
|
|
2024-10-10 13:40:46 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-12-27 18:11:46 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-04-03 21:26:11 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-10-05 20:06:07 +02:00
|
|
|
|
2013-04-03 21:26:11 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-06-01 15:38:29 +02:00
|
|
|
|
2017-08-29 13:11:09 -04:00
|
|
|
|
2020-12-16 10:57:58 -08:00
|
|
|
|
perf tools: Support data block and addr block
Two new data source fields, to indicate the block reasons of a load
instruction, are introduced on the Intel Sapphire Rapids server. The
fields can be used by the memory profiling.
Add a new sort function, SORT_MEM_BLOCKED, for the two fields.
For the previous platforms or the block reason is unknown, print "N/A"
for the block reason.
Add blocked as a default mem sort key for perf report and perf mem
report.
Committer testing:
So in machines without this capability we get a "N/A" filling the new "Blocked"
column:
$ perf mem record ls
arch certs CREDITS Documentation include ipc Kconfig lib MAINTAINERS mm samples security usr block
COPYING crypto drivers fs init Kbuild kernel LICENSES Makefile net README scripts sound tools
virt
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data (17 samples) ]
$
$ perf mem report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 6 of event 'cpu/mem-loads,ldlat=30/Pu'
# Total weight : 1381
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ .................... ....................... ............. ...................... ............ ..... ............ ...... .......
#
32.87% 1 454 Local RAM or RAM hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91cef3078 libc-2.31.so Hit L1 or L2 hit No N/A
25.56% 1 353 LFB or LFB hit [.] strcmp ld-2.31.so [.] 0x00005586973855ca ls None L1 or L2 hit No N/A
22.59% 1 312 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0e3b18 ld.so.cache None L1 or L2 hit No N/A
8.47% 1 117 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceee570 libc-2.31.so None L1 or L2 hit No N/A
6.88% 1 95 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceed490 libc-2.31.so None L1 or L2 hit No N/A
3.62% 1 50 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0ebe60 ld.so.cache None L1 or L2 hit No N/A
# Samples: 11 of event 'cpu/mem-stores/Pu'
# Total weight : 11
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ ............. ....................... ............. ...................... ........... ..... .......... ...... .......
#
9.09% 1 0 L1 hit [.] __strcoll_l libc-2.31.so [.] 0x00007fffe5648fc8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_lookup_symbol_x ld-2.31.so [.] 0x00007fffe56490b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_name_match_p ld-2.31.so [.] 0x00007fffe56487d8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_start ld-2.31.so [.] start_time+0x0 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_sysdep_start ld-2.31.so [.] 0x00007fffe56494b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5648ff8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649064 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649130 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xaf8 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xc28 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] 0x00007fffe56495b8 [stack] N/A N/A N/A N/A
# (Tip: Show user configuration overrides: perf config --user --list)
$
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/1612296553-21962-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-02 12:09:07 -08:00
|
|
|
|
2013-04-03 21:26:11 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 09:06:42 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-30 16:06:59 +09:00
|
|
|
|
2014-03-04 09:06:42 +09:00
|
|
|
|
|
|
|
|
|
perf report: Add weight[123] output fields
Add weight1, weight2 and weight3 fields to -F/--fields and their aliases
like 'ins_lat', 'p_stage_cyc' and 'retire_lat'. Note that they are in
the sort keys too but the difference is that output fields will sum up
the weight values and display the average.
In the sort key, users can see the distribution of weight value and I
think it's confusing we have local vs. global weight for the same weight.
For example, I experiment with mem-loads events to get the weights. On
my laptop, it seems only weight1 field is supported.
$ perf mem record -- perf test -w noploop
Let's look at the noploop function only. It has 7 samples.
$ perf script -F event,ip,sym,weight | grep noploop
# event weight ip sym
cpu/mem-loads,ldlat=30/P: 43 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 48 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 59 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 33 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
When you use the 'weight' sort key, it'd show entries with a separate
weight value separately. Also note that the first entry has 3 samples
with weight value 38, so they are displayed together and the weight
value is the sum of 3 samples (114 = 38 * 3).
$ perf report -n -s +weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Weight
0.53% 3 perf perf [.] noploop 114
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
If you use 'local_weight' sort key, you can see the actual weight.
$ perf report -n -s +local_weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Local Weight
0.53% 3 perf perf [.] noploop 38
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
But when you use the -F/--field option instead, you can see the average
weight for the while noploop function (as it won't group samples by
weight value and use the default 'comm,dso,sym' sort keys).
$ perf report -n -F +weight | grep -e Weight -e noploop
Warning:
--fields weight shows the average value unlike in the --sort key.
# Overhead Samples Weight1 Command Shared Object Symbol
1.23% 7 42.4 perf perf [.] noploop
The weight1 field shows the average value:
(38 * 3 + 59 + 48 + 43 + 33) / 7 = 42.4
Also it'd show the warning that 'weight' field has the average value.
Using 'weight1' can remove the warning.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240411181718.2367948-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-04-11 11:17:18 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 09:06:42 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-07-31 14:47:37 +09:00
|
|
|
|
2014-03-20 11:18:54 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-07-31 14:47:40 +09:00
|
|
|
|
2014-03-20 11:18:54 +09:00
|
|
|
|
|
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
2016-08-07 17:28:30 +02:00
|
|
|
|
|
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2016-06-14 20:19:19 +02:00
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2014-07-31 14:47:40 +09:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-06-14 20:19:20 +02:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2016-06-14 20:19:20 +02:00
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
|
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-01-08 09:45:46 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:03 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-09 22:46:57 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:33 +09:00
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2016-03-09 22:46:57 +09:00
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-09 22:46:57 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:33 +09:00
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:03 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:14 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-07-31 14:47:40 +09:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-01-08 09:45:46 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:03 +01:00
|
|
|
|
2016-01-18 10:24:09 +01:00
|
|
|
|
2022-12-15 11:28:14 -08:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Move elide bool into perf_hpp_fmt struct
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 17:15:47 +02:00
|
|
|
|
2014-07-31 14:47:37 +09:00
|
|
|
|
2014-07-31 14:47:38 +09:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:07 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:09 +01:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2016-01-18 10:24:07 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-09 22:46:56 +09:00
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
2016-03-09 22:46:56 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
2016-03-09 22:46:56 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
2016-03-09 22:46:56 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-25 00:13:37 +09:00
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
|
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:16 +01:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2018-09-19 14:56:45 -04:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
2015-12-23 02:07:05 +09:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-09-19 14:56:46 -04:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:03 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-09-19 14:56:45 -04:00
|
|
|
|
2015-12-23 02:07:03 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:05 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:03 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
2016-08-07 17:28:27 +02:00
|
|
|
|
2016-08-07 17:28:30 +02:00
|
|
|
|
|
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-06-14 20:19:20 +02:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:08 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:03 +09:00
|
|
|
|
2018-09-19 14:56:45 -04:00
|
|
|
|
2015-12-23 02:07:03 +09:00
|
|
|
|
|
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:05 +09:00
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:03 +09:00
|
|
|
|
2016-02-27 03:52:46 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:05 +09:00
|
|
|
|
2015-12-23 02:07:03 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:05 +09:00
|
|
|
|
2015-12-23 02:07:03 +09:00
|
|
|
|
2018-08-08 14:02:52 -04:00
|
|
|
|
2015-12-23 02:07:03 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-09-19 14:56:45 -04:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-09-19 14:56:46 -04:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
2018-08-08 14:02:53 -04:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
2023-01-10 23:06:40 -08:00
|
|
|
|
2021-11-22 18:30:48 +09:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:08 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-21 23:22:35 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:09 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:14 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-12-15 11:28:14 -08:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-02-21 23:22:35 +09:00
|
|
|
|
2016-01-18 10:24:09 +01:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
2016-03-07 16:44:45 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2016-03-07 16:44:45 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2016-03-07 16:44:45 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-05 19:58:35 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:28 +02:00
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
|
|
|
|
|
2019-09-03 10:39:52 +02:00
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
2020-04-30 11:06:45 -03:00
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-06-23 11:26:15 -03:00
|
|
|
|
2016-01-05 19:58:35 +09:00
|
|
|
|
2023-04-20 15:54:11 -03:00
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
2016-01-05 19:58:35 +09:00
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2018-09-19 14:56:45 -04:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2015-12-23 02:07:07 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2015-12-23 02:07:07 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2015-12-23 02:07:09 +09:00
|
|
|
|
|
|
|
|
|
2024-11-18 14:53:43 -08:00
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:09 +09:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2015-12-23 02:07:09 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2015-12-23 02:07:09 +09:00
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2015-12-23 02:07:09 +09:00
|
|
|
|
2016-06-23 11:26:15 -03:00
|
|
|
|
2019-07-21 13:24:29 +02:00
|
|
|
|
2015-12-23 02:07:09 +09:00
|
|
|
|
|
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2015-12-23 02:07:09 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2016-01-05 19:58:35 +09:00
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2016-01-05 19:58:35 +09:00
|
|
|
|
2016-06-23 11:26:15 -03:00
|
|
|
|
2024-11-18 14:53:43 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:29 +02:00
|
|
|
|
2016-01-05 19:58:35 +09:00
|
|
|
|
|
|
|
|
|
2024-11-18 14:53:43 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-05 19:58:35 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2016-01-05 19:58:35 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2016-01-05 19:58:35 +09:00
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2015-12-23 02:07:05 +09:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:05 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2015-12-23 02:07:09 +09:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2015-12-23 02:07:09 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-05 19:58:35 +09:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2016-01-05 19:58:35 +09:00
|
|
|
|
|
|
|
|
|
perf tools: Fix segfault when trying to process tracepoints in perf.data and not linked with libtraceevent
When we have a perf.data file with tracepoints, such as:
# perf evlist -f
probe_perf:lzma_decompress_to_file
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
#
We end up segfaulting when using perf built with NO_LIBTRACEEVENT=1 by
trying to find an evsel with a NULL 'event_name' variable:
(gdb) run report --stdio -f
Starting program: /root/bin/perf report --stdio -f
Program received signal SIGSEGV, Segmentation fault.
0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
warning: Source file is more recent than executable.
2830 if (event_name[0] == '%') {
Missing separate debuginfos, use: dnf debuginfo-install bzip2-libs-1.0.8-11.fc36.x86_64 cyrus-sasl-lib-2.1.27-18.fc36.x86_64 elfutils-debuginfod-client-0.188-3.fc36.x86_64 elfutils-libelf-0.188-3.fc36.x86_64 elfutils-libs-0.188-3.fc36.x86_64 glibc-2.35-20.fc36.x86_64 keyutils-libs-1.6.1-4.fc36.x86_64 krb5-libs-1.19.2-12.fc36.x86_64 libbrotli-1.0.9-7.fc36.x86_64 libcap-2.48-4.fc36.x86_64 libcom_err-1.46.5-2.fc36.x86_64 libcurl-7.82.0-12.fc36.x86_64 libevent-2.1.12-6.fc36.x86_64 libgcc-12.2.1-4.fc36.x86_64 libidn2-2.3.4-1.fc36.x86_64 libnghttp2-1.51.0-1.fc36.x86_64 libpsl-0.21.1-5.fc36.x86_64 libselinux-3.3-4.fc36.x86_64 libssh-0.9.6-4.fc36.x86_64 libstdc++-12.2.1-4.fc36.x86_64 libunistring-1.0-1.fc36.x86_64 libunwind-1.6.2-2.fc36.x86_64 libxcrypt-4.4.33-4.fc36.x86_64 libzstd-1.5.2-2.fc36.x86_64 numactl-libs-2.0.14-5.fc36.x86_64 opencsd-1.2.0-1.fc36.x86_64 openldap-2.6.3-1.fc36.x86_64 openssl-libs-3.0.5-2.fc36.x86_64 slang-2.3.2-11.fc36.x86_64 xz-libs-5.2.5-9.fc36.x86_64 zlib-1.2.11-33.fc36.x86_64
(gdb) bt
#0 0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
#1 0x0000000000552416 in add_dynamic_entry (evlist=0xfda7b0, tok=0xffb6eb "trace", level=2) at util/sort.c:2976
#2 0x0000000000552d26 in sort_dimension__add (list=0xf93e00 <perf_hpp_list>, tok=0xffb6eb "trace", evlist=0xfda7b0, level=2) at util/sort.c:3193
#3 0x0000000000552e1c in setup_sort_list (list=0xf93e00 <perf_hpp_list>, str=0xffb6eb "trace", evlist=0xfda7b0) at util/sort.c:3227
#4 0x00000000005532fa in __setup_sorting (evlist=0xfda7b0) at util/sort.c:3381
#5 0x0000000000553cdc in setup_sorting (evlist=0xfda7b0) at util/sort.c:3608
#6 0x000000000042eb9f in cmd_report (argc=0, argv=0x7fffffffe470) at builtin-report.c:1596
#7 0x00000000004aee7e in run_builtin (p=0xf64ca0 <commands+288>, argc=3, argv=0x7fffffffe470) at perf.c:330
#8 0x00000000004af0f2 in handle_internal_command (argc=3, argv=0x7fffffffe470) at perf.c:384
#9 0x00000000004af241 in run_argv (argcp=0x7fffffffe29c, argv=0x7fffffffe290) at perf.c:428
#10 0x00000000004af5fc in main (argc=3, argv=0x7fffffffe470) at perf.c:562
(gdb)
So check if we have tracepoint events in add_dynamic_entry() and bail
out instead:
# perf report --stdio -f
This perf binary isn't linked with libtraceevent, can't process probe_perf:lzma_decompress_to_file
Error:
Unknown --sort key: `trace'
#
Fixes: 378ef0f5d9d7f465 ("perf build: Use libtraceevent from the system")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/Y7MDb7kRaHZB6APC@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-02 13:06:45 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2016-01-05 19:58:35 +09:00
|
|
|
|
2015-12-23 02:07:06 +09:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:29 +02:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2015-12-23 02:07:07 +09:00
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2015-12-23 02:07:07 +09:00
|
|
|
|
2024-11-18 14:53:43 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2015-12-23 02:07:07 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2015-12-23 02:07:07 +09:00
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-04-03 21:26:10 +09:00
|
|
|
|
|
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
2013-04-03 21:26:10 +09:00
|
|
|
|
|
|
|
|
|
2016-05-03 13:54:42 +02:00
|
|
|
|
2013-04-03 21:26:10 +09:00
|
|
|
|
|
|
|
|
|
2014-03-03 11:46:55 +09:00
|
|
|
|
|
|
|
|
|
2013-04-03 21:26:10 +09:00
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 09:06:42 +09:00
|
|
|
|
2016-01-18 10:24:07 +01:00
|
|
|
|
2014-03-04 09:06:42 +09:00
|
|
|
|
2016-01-18 10:24:07 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2016-01-18 10:24:07 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
2014-03-04 09:06:42 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:16 +01:00
|
|
|
|
|
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:16 +01:00
|
|
|
|
|
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2016-01-18 10:24:07 +01:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2016-01-18 10:24:07 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2016-01-18 10:24:07 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:16 +01:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-10-06 14:25:11 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:16 +01:00
|
|
|
|
2015-10-06 14:25:11 +02:00
|
|
|
|
|
|
|
|
|
2016-09-22 17:36:33 +02:00
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2016-09-22 17:36:33 +02:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2021-03-22 10:57:24 -04:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2021-03-22 10:57:27 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-12-27 18:11:46 +09:00
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2012-12-27 18:11:46 +09:00
|
|
|
|
2021-03-22 10:57:24 -04:00
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2021-03-22 10:57:24 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-01-30 10:55:52 -08:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-04-02 12:30:57 -03:00
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2016-05-03 13:54:43 +02:00
|
|
|
|
2013-04-05 10:26:36 +09:00
|
|
|
|
2016-05-03 13:54:44 +02:00
|
|
|
|
perf diff: Support for different binaries
Currently, the perf diff only works with same binaries. That's because
it compares the symbol start address. It doesn't work if the perf.data
comes from different binaries. This patch matches the symbol names.
Actually, perf diff once intended to compare the symbol names. The
commit as below can look for a pair by name.
604c5c92972d (perf diff: Change the default sort order to "dso,symbol")
However, at that time, perf diff used a global list of dsos. That means
the binaries which has same name can only be loaded once. That's a
problem for comparing different binaries.
For example, we have an old binary and an updated binary. They very
likely have same name and most of the functions, so only dsos from old
binary will be loaded. When processing the data from updated binary,
perf still use the symbol information from old binary. That's wrong.
Then the commit as below used IP to replace symbol name.
9c443dfdd31e ("perf diff: Fix support for all --sort combinations")
>From that time, perf diff starts to compare the symbol address.
The global dsos is discarded from a patch in 2010.
a1645ce12adb ("perf: 'perf kvm' tool for monitoring guest performance
from host")
However, at that time, perf diff already compared by address. So perf
diff cannot work for different binaries as well.
This patch actually rolls back the perf diff to original design. The
document is also changed, so everybody knows the original design is to
compare the symbol names.
Here are some examples:
The only difference between example_v1.c and example_v2.c is the
location of f2 and f3. There is no change in behavior, but the previous
perf diff display the wrong differential profile.
example_v1.c
noinline void f3(void)
{
volatile int i;
for (i = 0; i < 10000;) {
if(i%2)
i++;
else
i++;
}
}
noinline void f2(void)
{
volatile int a = 100, b, c;
for (b = 0; b < 10000; b++)
c = a * b;
}
noinline void f1(void)
{
f2();
f3();
}
int main()
{
int i;
for (i = 0; i < 100000; i++)
f1();
}
example_v2.c
noinline void f2(void)
{
volatile int a = 100, b, c;
for (b = 0; b < 10000; b++)
c = a * b;
}
noinline void f3(void)
{
volatile int i;
for (i = 0; i < 10000;) {
if(i%2)
i++;
else
i++;
}
}
noinline void f1(void)
{
f2();
f3();
}
int main()
{
int i;
for (i = 0; i < 100000; i++)
f1();
}
[lk@localhost perf_diff]$ gcc example_v1.c -o example
[lk@localhost perf_diff]$ perf record -o example_v1.data ./example
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.813 MB example_v1.data (~35522 samples) ]
[lk@localhost perf_diff]$ gcc example_v2.c -o example
[lk@localhost perf_diff]$ perf record -o example_v2.data ./example
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.824 MB example_v2.data (~36015 samples) ]
Old perf diff result:
[lk@localhost perf_diff]$ perf diff example_v1.data example_v2.data
Event 'cycles'
Baseline Delta Shared Object Symbol
........ ....... ................ ...............................
[kernel.vmlinux] [k] __perf_event_task_sched_out
0.00% [kernel.vmlinux] [k] apic_timer_interrupt
[kernel.vmlinux] [k] idle_cpu
[kernel.vmlinux] [k] intel_pstate_timer_func
[kernel.vmlinux] [k] native_read_msr_safe
0.00% [kernel.vmlinux] [k] native_read_tsc
0.00% [kernel.vmlinux] [k] native_write_msr_safe
[kernel.vmlinux] [k] ntp_tick_length
0.00% [kernel.vmlinux] [k] rb_erase
0.00% [kernel.vmlinux] [k] tick_sched_timer
0.00% [kernel.vmlinux] [k] unmap_single_vma
0.00% [kernel.vmlinux] [k] update_wall_time
0.00% example [.] f1
46.24% example [.] f2
53.71% -7.55% example [.] f3
+53.81% example [.] f3
0.02% example [.] main
New perf diff result:
[lk@localhost perf_diff]$ perf diff example_v1.data example_v2.data
[kernel.vmlinux] [k] __perf_event_task_sched_out
0.00% [kernel.vmlinux] [k] apic_timer_interrupt
[kernel.vmlinux] [k] idle_cpu
[kernel.vmlinux] [k] intel_pstate_timer_func
[kernel.vmlinux] [k] native_read_msr_safe
0.00% [kernel.vmlinux] [k] native_read_tsc
0.00% [kernel.vmlinux] [k] native_write_msr_safe
[kernel.vmlinux] [k] ntp_tick_length
0.00% [kernel.vmlinux] [k] rb_erase
0.00% [kernel.vmlinux] [k] tick_sched_timer
0.00% [kernel.vmlinux] [k] unmap_single_vma
0.00% [kernel.vmlinux] [k] update_wall_time
0.00% example [.] f1
46.24% -0.08% example [.] f2
53.71% +0.11% example [.] f3
0.02% example [.] main
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1423460384-11645-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-09 05:39:44 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-12-18 14:21:10 +09:00
|
|
|
|
2016-05-03 13:54:45 +02:00
|
|
|
|
2015-09-04 10:45:43 -04:00
|
|
|
|
2016-05-03 13:54:46 +02:00
|
|
|
|
2016-01-21 19:13:24 -03:00
|
|
|
|
2016-05-03 13:54:47 +02:00
|
|
|
|
2016-03-09 23:20:51 +09:00
|
|
|
|
2016-05-03 13:54:48 +02:00
|
|
|
|
2023-12-12 16:13:20 -08:00
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
2012-12-27 18:11:46 +09:00
|
|
|
|
2014-03-04 09:06:42 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
2014-03-04 09:06:42 +09:00
|
|
|
|
|
|
|
|
|
2012-12-27 18:11:46 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2012-12-27 18:11:46 +09:00
|
|
|
|
|
|
|
|
|
2024-10-10 13:40:46 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-12-27 18:11:46 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-03 13:54:44 +02:00
|
|
|
|
2012-12-27 18:11:46 +09:00
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
2012-12-27 18:11:46 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-04-03 21:26:11 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2013-04-03 21:26:11 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-05-17 15:03:05 -03:00
|
|
|
|
2016-07-15 10:08:43 -03:00
|
|
|
|
|
|
|
|
|
2013-04-03 21:26:11 +09:00
|
|
|
|
2016-05-03 13:54:44 +02:00
|
|
|
|
2013-04-03 21:26:11 +09:00
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
2013-04-03 21:26:11 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
perf tools: Add dynamic sort key for tracepoint events
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 02:07:02 +09:00
|
|
|
|
|
|
|
|
|
2009-09-24 18:02:49 +02:00
|
|
|
|
|
|
|
|
|
2009-12-14 20:09:29 -02:00
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2016-01-18 10:24:10 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-07 16:44:43 -03:00
|
|
|
|
2016-03-07 16:44:47 -03:00
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:10 +01:00
|
|
|
|
2016-03-07 16:44:47 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:10 +01:00
|
|
|
|
2016-03-07 16:44:47 -03:00
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
2016-03-07 16:44:47 -03:00
|
|
|
|
2018-05-17 15:03:05 -03:00
|
|
|
|
2019-11-14 18:52:11 +05:30
|
|
|
|
2016-07-15 10:08:43 -03:00
|
|
|
|
2019-11-14 18:52:11 +05:30
|
|
|
|
2016-03-07 16:44:47 -03:00
|
|
|
|
|
|
|
|
|
2019-11-14 18:52:11 +05:30
|
|
|
|
2016-03-07 16:44:47 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:10 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2014-03-18 11:31:39 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:10 +09:00
|
|
|
|
2014-03-18 11:31:39 +09:00
|
|
|
|
2015-12-23 02:07:10 +09:00
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2014-03-18 11:31:39 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-30 14:52:44 -03:00
|
|
|
|
2015-12-23 02:07:10 +09:00
|
|
|
|
|
|
|
|
|
2016-06-23 11:26:15 -03:00
|
|
|
|
2019-07-21 13:24:29 +02:00
|
|
|
|
2015-12-23 02:07:10 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-18 11:31:39 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2014-08-23 14:59:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-14 18:52:11 +05:30
|
|
|
|
2014-08-23 14:59:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:10 +09:00
|
|
|
|
2017-06-27 11:22:31 -03:00
|
|
|
|
2014-08-23 14:59:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-07 10:14:08 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-05-21 21:32:17 +08:00
|
|
|
|
2016-01-07 10:14:08 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-10 11:26:24 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-07 10:14:08 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2009-12-14 20:09:29 -02:00
|
|
|
|
2016-01-18 10:24:10 +01:00
|
|
|
|
2014-08-23 14:59:48 +02:00
|
|
|
|
2013-02-06 14:57:16 +09:00
|
|
|
|
2009-12-14 20:09:29 -02:00
|
|
|
|
2015-12-23 02:07:10 +09:00
|
|
|
|
2014-08-23 14:59:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2014-08-22 15:58:38 +02:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-12-23 02:07:10 +09:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2014-03-18 11:31:39 +09:00
|
|
|
|
|
|
|
|
|
2013-02-06 14:57:17 +09:00
|
|
|
|
2017-06-27 11:22:31 -03:00
|
|
|
|
2013-02-06 14:57:17 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-07 10:14:08 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-06-27 11:22:31 -03:00
|
|
|
|
2016-01-07 10:14:08 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
2009-12-14 20:09:29 -02:00
|
|
|
|
|
|
|
|
|
2013-02-06 14:57:16 +09:00
|
|
|
|
2009-12-14 20:09:29 -02:00
|
|
|
|
perf diff: Use perf_session__fprintf_hists just like 'perf record'
That means that almost everything you can do with 'perf report'
can be done with 'perf diff', for instance:
$ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2699
samples) ] $ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2687
samples) ] perf diff | head -8
9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal
2.91% -1.00% find [kernel] [k] __kmalloc
2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent
1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock
2.44% find [kernel] [k] half_md4_transform
$
So if you want to zoom into libc:
$ perf diff --dsos libc-2.10.1.so | head -8
37.34% find [.] _IO_vfprintf_internal
10.34% find [.] __GI_memmove
8.25% +2.00% find [.] _int_malloc
5.07% -1.00% find [.] __GI_mempcpy
7.62% +2.00% find [.] _int_free
$
And if there were multiple commands using libc, it is also
possible to aggregate them all by using --sort symbol:
$ perf diff --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% [.] __GI_mempcpy
7.62% +2.00% [.] _int_free
$
The displacement column now is off by default, to use it:
perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% +2 [.] __GI_mempcpy
7.62% +2.00% -1 [.] _int_free
$
Using -t/--field-separator can be used for scripting:
$ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34, , ,[.] _IO_vfprintf_internal
10.34, , ,[.] __GI_memmove
8.25,+2.00%, ,[.] _int_malloc
5.07,-1.00%, +2,[.] __GI_mempcpy
7.62,+2.00%, -1,[.] _int_free
6.99,+1.00%, -1,[.] _IO_new_file_xsputn
1.89,-2.00%, +4,[.] __readdir64
$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-16 13:49:27 -02:00
|
|
|
|
perf tools: Move elide bool into perf_hpp_fmt struct
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 17:15:47 +02:00
|
|
|
|
2014-03-18 13:00:59 +09:00
|
|
|
|
perf tools: Move elide bool into perf_hpp_fmt struct
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 17:15:47 +02:00
|
|
|
|
|
|
|
|
|
2014-03-18 13:00:59 +09:00
|
|
|
|
2016-01-18 10:24:17 +01:00
|
|
|
|
perf tools: Move elide bool into perf_hpp_fmt struct
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 17:15:47 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-18 13:00:59 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Move elide bool into perf_hpp_fmt struct
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 17:15:47 +02:00
|
|
|
|
perf diff: Use perf_session__fprintf_hists just like 'perf record'
That means that almost everything you can do with 'perf report'
can be done with 'perf diff', for instance:
$ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2699
samples) ] $ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2687
samples) ] perf diff | head -8
9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal
2.91% -1.00% find [kernel] [k] __kmalloc
2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent
1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock
2.44% find [kernel] [k] half_md4_transform
$
So if you want to zoom into libc:
$ perf diff --dsos libc-2.10.1.so | head -8
37.34% find [.] _IO_vfprintf_internal
10.34% find [.] __GI_memmove
8.25% +2.00% find [.] _int_malloc
5.07% -1.00% find [.] __GI_mempcpy
7.62% +2.00% find [.] _int_free
$
And if there were multiple commands using libc, it is also
possible to aggregate them all by using --sort symbol:
$ perf diff --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% [.] __GI_mempcpy
7.62% +2.00% [.] _int_free
$
The displacement column now is off by default, to use it:
perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% +2 [.] __GI_mempcpy
7.62% +2.00% -1 [.] _int_free
$
Using -t/--field-separator can be used for scripting:
$ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34, , ,[.] _IO_vfprintf_internal
10.34, , ,[.] __GI_memmove
8.25,+2.00%, ,[.] _int_malloc
5.07,-1.00%, +2,[.] __GI_mempcpy
7.62,+2.00%, -1,[.] _int_free
6.99,+1.00%, -1,[.] _IO_new_file_xsputn
1.89,-2.00%, +4,[.] __readdir64
$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-16 13:49:27 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Move elide bool into perf_hpp_fmt struct
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 17:15:47 +02:00
|
|
|
|
perf diff: Use perf_session__fprintf_hists just like 'perf record'
That means that almost everything you can do with 'perf report'
can be done with 'perf diff', for instance:
$ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2699
samples) ] $ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2687
samples) ] perf diff | head -8
9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal
2.91% -1.00% find [kernel] [k] __kmalloc
2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent
1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock
2.44% find [kernel] [k] half_md4_transform
$
So if you want to zoom into libc:
$ perf diff --dsos libc-2.10.1.so | head -8
37.34% find [.] _IO_vfprintf_internal
10.34% find [.] __GI_memmove
8.25% +2.00% find [.] _int_malloc
5.07% -1.00% find [.] __GI_mempcpy
7.62% +2.00% find [.] _int_free
$
And if there were multiple commands using libc, it is also
possible to aggregate them all by using --sort symbol:
$ perf diff --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% [.] __GI_mempcpy
7.62% +2.00% [.] _int_free
$
The displacement column now is off by default, to use it:
perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% +2 [.] __GI_mempcpy
7.62% +2.00% -1 [.] _int_free
$
Using -t/--field-separator can be used for scripting:
$ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34, , ,[.] _IO_vfprintf_internal
10.34, , ,[.] __GI_memmove
8.25,+2.00%, ,[.] _int_malloc
5.07,-1.00%, +2,[.] __GI_mempcpy
7.62,+2.00%, -1,[.] _int_free
6.99,+1.00%, -1,[.] _IO_new_file_xsputn
1.89,-2.00%, +4,[.] __readdir64
$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-16 13:49:27 -02:00
|
|
|
|
perf tools: Move elide bool into perf_hpp_fmt struct
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 17:15:47 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Add "addr_from" and "addr_to" sort dimensions
With the existing symbol_from/symbol_to, branches captured in the same
function would be collapsed into a single function if the latencies
associated with the each branch (cycles) were all the same. That is the
case on Intel Broadwell, for instance. Since Intel Skylake, the latency
is captured by hardware and therefore is used to disambiguate branches.
Add addr_from/addr_to sort dimensions to sort branches based on their
addresses and not the function there are in. The output is still the
function name but the offset within the function is provided to uniquely
identify each branch. These new sort dimensions also help with annotate
because they create different entries in the histogram which, in turn,
generates proper branch annotations.
Here is an example using AMD's branch sampling:
$ perf record -a -b -c 1000037 -e cpu/branch-brs/ test_prg
$ perf report
Samples: 6M of event 'cpu/branch-brs/', Event count (approx.): 6901276
Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycle
99.65% test_prg test_prg [.] test_thread [.] test_thread -
0.02% test_prg [kernel.vmlinux] [k] asm_sysvec_apic_timer_interrupt [k] error_entry -
$ perf report -F overhead,comm,dso,addr_from,addr_to
Samples: 6M of event 'cpu/branch-brs/', Event count (approx.): 6901276
Overhead Command Shared Object Source Address Target Address
4.22% test_prg test_prg [.] test_thread+0x3c [.] test_thread+0x4
4.13% test_prg test_prg [.] test_thread+0x4 [.] test_thread+0x3a
4.09% test_prg test_prg [.] test_thread+0x3a [.] test_thread+0x6
4.08% test_prg test_prg [.] test_thread+0x2 [.] test_thread+0x3c
4.06% test_prg test_prg [.] test_thread+0x3e [.] test_thread+0x2
3.87% test_prg test_prg [.] test_thread+0x6 [.] test_thread+0x38
3.84% test_prg test_prg [.] test_thread [.] test_thread+0x3e
3.76% test_prg test_prg [.] test_thread+0x1e [.] test_thread
3.76% test_prg test_prg [.] test_thread+0x38 [.] test_thread+0x8
3.56% test_prg test_prg [.] test_thread+0x22 [.] test_thread+0x1e
3.54% test_prg test_prg [.] test_thread+0x8 [.] test_thread+0x36
3.47% test_prg test_prg [.] test_thread+0x1c [.] test_thread+0x22
3.45% test_prg test_prg [.] test_thread+0x36 [.] test_thread+0xa
3.28% test_prg test_prg [.] test_thread+0x24 [.] test_thread+0x1c
3.25% test_prg test_prg [.] test_thread+0xa [.] test_thread+0x34
3.24% test_prg test_prg [.] test_thread+0x1a [.] test_thread+0x24
3.20% test_prg test_prg [.] test_thread+0x34 [.] test_thread+0xc
3.04% test_prg test_prg [.] test_thread+0x26 [.] test_thread+0x1a
3.01% test_prg test_prg [.] test_thread+0xc [.] test_thread+0x32
2.98% test_prg test_prg [.] test_thread+0x18 [.] test_thread+0x26
2.94% test_prg test_prg [.] test_thread+0x32 [.] test_thread+0xe
2.76% test_prg test_prg [.] test_thread+0x28 [.] test_thread+0x18
2.73% test_prg test_prg [.] test_thread+0xe [.] test_thread+0x30
2.67% test_prg test_prg [.] test_thread+0x30 [.] test_thread+0x10
2.67% test_prg test_prg [.] test_thread+0x16 [.] test_thread+0x28
2.46% test_prg test_prg [.] test_thread+0x10 [.] test_thread+0x2e
2.44% test_prg test_prg [.] test_thread+0x2a [.] test_thread+0x16
2.38% test_prg test_prg [.] test_thread+0x14 [.] test_thread+0x2a
2.32% test_prg test_prg [.] test_thread+0x2e [.] test_thread+0x12
2.28% test_prg test_prg [.] test_thread+0x12 [.] test_thread+0x2c
2.16% test_prg test_prg [.] test_thread+0x2c [.] test_thread+0x14
0.02% test_prg [kernel.vmlinux] [k] asm_sysvec_apic_ti+0x5 [k] error_entry
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20220208211637.2221872-13-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-08 13:16:37 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Move elide bool into perf_hpp_fmt struct
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 17:15:47 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf diff: Use perf_session__fprintf_hists just like 'perf record'
That means that almost everything you can do with 'perf report'
can be done with 'perf diff', for instance:
$ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2699
samples) ] $ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2687
samples) ] perf diff | head -8
9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal
2.91% -1.00% find [kernel] [k] __kmalloc
2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent
1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock
2.44% find [kernel] [k] half_md4_transform
$
So if you want to zoom into libc:
$ perf diff --dsos libc-2.10.1.so | head -8
37.34% find [.] _IO_vfprintf_internal
10.34% find [.] __GI_memmove
8.25% +2.00% find [.] _int_malloc
5.07% -1.00% find [.] __GI_mempcpy
7.62% +2.00% find [.] _int_free
$
And if there were multiple commands using libc, it is also
possible to aggregate them all by using --sort symbol:
$ perf diff --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% [.] __GI_mempcpy
7.62% +2.00% [.] _int_free
$
The displacement column now is off by default, to use it:
perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% +2 [.] __GI_mempcpy
7.62% +2.00% -1 [.] _int_free
$
Using -t/--field-separator can be used for scripting:
$ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34, , ,[.] _IO_vfprintf_internal
10.34, , ,[.] __GI_memmove
8.25,+2.00%, ,[.] _int_malloc
5.07,-1.00%, +2,[.] __GI_mempcpy
7.62,+2.00%, -1,[.] _int_free
6.99,+1.00%, -1,[.] _IO_new_file_xsputn
1.89,-2.00%, +4,[.] __readdir64
$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-16 13:49:27 -02:00
|
|
|
|
2013-04-03 21:26:19 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-05-19 14:19:30 +09:00
|
|
|
|
|
|
|
|
|
2013-11-08 17:53:42 +09:00
|
|
|
|
2016-01-18 10:24:17 +01:00
|
|
|
|
perf tools: Move elide bool into perf_hpp_fmt struct
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 17:15:47 +02:00
|
|
|
|
|
|
|
|
|
2013-04-03 21:26:19 +09:00
|
|
|
|
perf tools: Move elide bool into perf_hpp_fmt struct
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 17:15:47 +02:00
|
|
|
|
|
|
|
|
|
2013-04-03 21:26:19 +09:00
|
|
|
|
|
|
|
|
|
2013-11-08 17:53:42 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:17 +01:00
|
|
|
|
2014-05-19 14:19:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Move elide bool into perf_hpp_fmt struct
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 17:15:47 +02:00
|
|
|
|
2013-11-08 17:53:42 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:17 +01:00
|
|
|
|
2014-05-19 14:19:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Move elide bool into perf_hpp_fmt struct
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 17:15:47 +02:00
|
|
|
|
2014-05-19 14:19:30 +09:00
|
|
|
|
2013-04-03 21:26:19 +09:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
perf report: Add weight[123] output fields
Add weight1, weight2 and weight3 fields to -F/--fields and their aliases
like 'ins_lat', 'p_stage_cyc' and 'retire_lat'. Note that they are in
the sort keys too but the difference is that output fields will sum up
the weight values and display the average.
In the sort key, users can see the distribution of weight value and I
think it's confusing we have local vs. global weight for the same weight.
For example, I experiment with mem-loads events to get the weights. On
my laptop, it seems only weight1 field is supported.
$ perf mem record -- perf test -w noploop
Let's look at the noploop function only. It has 7 samples.
$ perf script -F event,ip,sym,weight | grep noploop
# event weight ip sym
cpu/mem-loads,ldlat=30/P: 43 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 48 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 59 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 33 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
When you use the 'weight' sort key, it'd show entries with a separate
weight value separately. Also note that the first entry has 3 samples
with weight value 38, so they are displayed together and the weight
value is the sum of 3 samples (114 = 38 * 3).
$ perf report -n -s +weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Weight
0.53% 3 perf perf [.] noploop 114
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
If you use 'local_weight' sort key, you can see the actual weight.
$ perf report -n -s +local_weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Local Weight
0.53% 3 perf perf [.] noploop 38
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
But when you use the -F/--field option instead, you can see the average
weight for the while noploop function (as it won't group samples by
weight value and use the default 'comm,dso,sym' sort keys).
$ perf report -n -F +weight | grep -e Weight -e noploop
Warning:
--fields weight shows the average value unlike in the --sort key.
# Overhead Samples Weight1 Command Shared Object Symbol
1.23% 7 42.4 perf perf [.] noploop
The weight1 field shows the average value:
(38 * 3 + 59 + 48 + 43 + 33) / 7 = 42.4
Also it'd show the warning that 'weight' field has the average value.
Using 'weight1' can remove the warning.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240411181718.2367948-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-04-11 11:17:18 -07:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Add weight[123] output fields
Add weight1, weight2 and weight3 fields to -F/--fields and their aliases
like 'ins_lat', 'p_stage_cyc' and 'retire_lat'. Note that they are in
the sort keys too but the difference is that output fields will sum up
the weight values and display the average.
In the sort key, users can see the distribution of weight value and I
think it's confusing we have local vs. global weight for the same weight.
For example, I experiment with mem-loads events to get the weights. On
my laptop, it seems only weight1 field is supported.
$ perf mem record -- perf test -w noploop
Let's look at the noploop function only. It has 7 samples.
$ perf script -F event,ip,sym,weight | grep noploop
# event weight ip sym
cpu/mem-loads,ldlat=30/P: 43 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 48 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 59 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 33 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
When you use the 'weight' sort key, it'd show entries with a separate
weight value separately. Also note that the first entry has 3 samples
with weight value 38, so they are displayed together and the weight
value is the sum of 3 samples (114 = 38 * 3).
$ perf report -n -s +weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Weight
0.53% 3 perf perf [.] noploop 114
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
If you use 'local_weight' sort key, you can see the actual weight.
$ perf report -n -s +local_weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Local Weight
0.53% 3 perf perf [.] noploop 38
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
But when you use the -F/--field option instead, you can see the average
weight for the while noploop function (as it won't group samples by
weight value and use the default 'comm,dso,sym' sort keys).
$ perf report -n -F +weight | grep -e Weight -e noploop
Warning:
--fields weight shows the average value unlike in the --sort key.
# Overhead Samples Weight1 Command Shared Object Symbol
1.23% 7 42.4 perf perf [.] noploop
The weight1 field shows the average value:
(38 * 3 + 59 + 48 + 43 + 33) / 7 = 42.4
Also it'd show the warning that 'weight' field has the average value.
Using 'weight1' can remove the warning.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240411181718.2367948-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-04-11 11:17:18 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:16 +01:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
2021-03-04 11:59:58 +05:30
|
|
|
|
2019-11-14 18:52:12 +05:30
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:16 +01:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
2021-03-04 11:59:58 +05:30
|
|
|
|
2019-11-14 18:52:12 +05:30
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:16 +01:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:16 +01:00
|
|
|
|
2016-01-18 10:24:11 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:16 +01:00
|
|
|
|
2016-01-18 10:24:11 +01:00
|
|
|
|
2018-01-18 10:28:14 -03:00
|
|
|
|
2016-01-18 10:24:11 +01:00
|
|
|
|
|
|
|
|
|
2018-01-18 10:28:14 -03:00
|
|
|
|
2016-01-18 10:24:11 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-09-22 17:36:32 +02:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-08-22 15:58:38 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:11 +01:00
|
|
|
|
2014-08-22 15:58:38 +02:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-08-22 15:58:38 +02:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2017-06-27 11:22:31 -03:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-08-22 15:58:38 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-14 18:52:11 +05:30
|
|
|
|
2014-08-22 15:58:38 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:16 +01:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2014-08-22 15:58:38 +02:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2016-03-02 09:58:00 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-03-09 11:04:17 +01:00
|
|
|
|
2016-03-02 09:58:00 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-01-18 10:24:21 +01:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2016-01-18 10:24:21 +01:00
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
2016-03-07 16:44:45 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-04 10:46:34 +09:00
|
|
|
|
|
|
|
|
|
2014-05-07 18:42:24 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-05-03 13:54:42 +02:00
|
|
|
|
2016-05-03 13:54:43 +02:00
|
|
|
|
2016-05-03 13:54:44 +02:00
|
|
|
|
2016-05-03 13:54:45 +02:00
|
|
|
|
2014-05-07 18:42:24 +09:00
|
|
|
|
2014-05-23 10:59:01 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-05-07 18:42:24 +09:00
|
|
|
|
2016-01-18 10:24:21 +01:00
|
|
|
|
2014-05-07 18:42:24 +09:00
|
|
|
|
perf report: Show all sort keys in help output
Show all the supported sort keys in the command line help output, so
that it's not needed to refer to the manpage.
Before:
% perf report -h
...
-s, --sort <key[,key2...]>
sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline, ... Please refer the man page for the complete list.
After:
% perf report -h
...
-s, --sort <key[,key2...]>
sort by key(s): overhead overhead_sys overhead_us overhead_guest_sys overhead_guest_us overhead_children sample period pid comm dso symbol parent cpu ...
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-5-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-9r3uz2ch4izoi1uln3f889co@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-14 15:49:57 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf build: Use libtraceevent from the system
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Show all sort keys in help output
Show all the supported sort keys in the command line help output, so
that it's not needed to refer to the manpage.
Before:
% perf report -h
...
-s, --sort <key[,key2...]>
sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline, ... Please refer the man page for the complete list.
After:
% perf report -h
...
-s, --sort <key[,key2...]>
sort by key(s): overhead overhead_sys overhead_us overhead_guest_sys overhead_guest_us overhead_children sample period pid comm dso symbol parent cpu ...
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-5-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-9r3uz2ch4izoi1uln3f889co@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-14 15:49:57 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-31 16:55:03 -07:00
|
|
|
|
perf report: Show all sort keys in help output
Show all the supported sort keys in the command line help output, so
that it's not needed to refer to the manpage.
Before:
% perf report -h
...
-s, --sort <key[,key2...]>
sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline, ... Please refer the man page for the complete list.
After:
% perf report -h
...
-s, --sort <key[,key2...]>
sort by key(s): overhead overhead_sys overhead_us overhead_guest_sys overhead_guest_us overhead_children sample period pid comm dso symbol parent cpu ...
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-5-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-9r3uz2ch4izoi1uln3f889co@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-14 15:49:57 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-31 16:55:03 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Show all sort keys in help output
Show all the supported sort keys in the command line help output, so
that it's not needed to refer to the manpage.
Before:
% perf report -h
...
-s, --sort <key[,key2...]>
sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline, ... Please refer the man page for the complete list.
After:
% perf report -h
...
-s, --sort <key[,key2...]>
sort by key(s): overhead overhead_sys overhead_us overhead_guest_sys overhead_guest_us overhead_children sample period pid comm dso symbol parent cpu ...
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-5-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-9r3uz2ch4izoi1uln3f889co@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-14 15:49:57 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|