kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/clocksource/mxs_timer.c

273 lines
7.3 KiB
Raw Normal View History

clocksource/drivers/mxs_timer: Switch to SPDX identifier Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-22 20:05:06 -03:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: request clock for timer When mxs_timer_init() does not have a timer_clk passed in, it should try to request clock from clkdev system. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-04-29 00:02:37 +08:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: retrieve timer irq from device tree Rather than using the static timer irq definition, we should retrieve timer irq from device tree for better. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-20 08:51:45 +08:00
ARM: mxs: get timrot base address from device tree Instead of using static defines, it gets timrot base address with mapping from device tree. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-25 14:57:41 +08:00
ARM: mxs: retrieve timer irq from device tree Rather than using the static timer irq definition, we should retrieve timer irq from device tree for better. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-20 08:51:45 +08:00
ARM: mxs: select STMP_DEVICE and use it for timer code Select STMP_DEVICE and in timer code replace mxs_reset_block() with stmp_reset_block(), use STMP_OFFSET_REG_SET/CLR to replace __mxs_setl/clrl. As the result, <mach/mxs.h> and <mach/common.h> includsion can be removed from timer.c now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-25 20:04:34 +08:00
sched_clock: Make ARM's sched_clock generic for all architectures Nothing about the sched_clock implementation in the ARM port is specific to the architecture. Generalize the code so that other architectures can use it by selecting GENERIC_SCHED_CLOCK. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [jstultz: Merge minor collisions with other patches in my tree] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-06-01 23:39:40 -07:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: use apbx bus clock to drive the timers on timrotv2 timer resolution of ~32us is pretty low. v2 has 32bits resolution, so we have quite some headroom, and can use the 24MHz clock. v1 has only 16bits, so we only increase v2. So we just exchange the timrot clock in imx28. On imx23 we have timrotv1 and everything stays the same. Signed-off-by: Torben Hohn <torbenh@linutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-21 15:06:15 +01:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: get timrot base address from device tree Instead of using static defines, it gets timrot base address with mapping from device tree. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-25 14:57:41 +08:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: select STMP_DEVICE and use it for timer code Select STMP_DEVICE and in timer code replace mxs_reset_block() with stmp_reset_block(), use STMP_OFFSET_REG_SET/CLR to replace __mxs_setl/clrl. As the result, <mach/mxs.h> and <mach/common.h> includsion can be removed from timer.c now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-25 20:04:34 +08:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: select STMP_DEVICE and use it for timer code Select STMP_DEVICE and in timer code replace mxs_reset_block() with stmp_reset_block(), use STMP_OFFSET_REG_SET/CLR to replace __mxs_setl/clrl. As the result, <mach/mxs.h> and <mach/common.h> includsion can be removed from timer.c now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-25 20:04:34 +08:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: select STMP_DEVICE and use it for timer code Select STMP_DEVICE and in timer code replace mxs_reset_block() with stmp_reset_block(), use STMP_OFFSET_REG_SET/CLR to replace __mxs_setl/clrl. As the result, <mach/mxs.h> and <mach/common.h> includsion can be removed from timer.c now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-25 20:04:34 +08:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clocksource: Use a plain u64 instead of cycle_t There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-21 20:32:01 +01:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clockevents/drivers/mxs: Migrate to new 'set-state' interface Migrate mxs driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Also drop: - 'mxs_clockevent_mode': as we have helpers available from core for the same. same state twice and so perhaps the check wasn't required. - 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore by drivers and it was used just to print old-state:new-state. The debug prints are called from mxs_irq_clear() now based on the state-name passed to it. The printed name will be same for shutdown and resume states as they use the same callback pointer. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-18 16:24:28 +05:30
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clockevents/drivers/mxs: Migrate to new 'set-state' interface Migrate mxs driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Also drop: - 'mxs_clockevent_mode': as we have helpers available from core for the same. same state twice and so perhaps the check wasn't required. - 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore by drivers and it was used just to print old-state:new-state. The debug prints are called from mxs_irq_clear() now based on the state-name passed to it. The printed name will be same for shutdown and resume states as they use the same callback pointer. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-18 16:24:28 +05:30
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clockevents/drivers/mxs: Migrate to new 'set-state' interface Migrate mxs driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Also drop: - 'mxs_clockevent_mode': as we have helpers available from core for the same. same state twice and so perhaps the check wasn't required. - 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore by drivers and it was used just to print old-state:new-state. The debug prints are called from mxs_irq_clear() now based on the state-name passed to it. The printed name will be same for shutdown and resume states as they use the same callback pointer. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-18 16:24:28 +05:30
clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined When DEBUG is defined this error occurs drivers/clocksource/mxs_timer.c:138:1: error: expected ‘;’ before ‘}’ token The preceding statement needs a semicolon. Replace pr_info() with pr_debug() and remove the unneeded ifdef. Fixes: eb8703e2ef7c ("clockevents/drivers/mxs: Migrate to new 'set-state' interface") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210118211955.763609-1-trix@redhat.com
2021-01-18 13:19:55 -08:00
clockevents/drivers/mxs: Migrate to new 'set-state' interface Migrate mxs driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Also drop: - 'mxs_clockevent_mode': as we have helpers available from core for the same. same state twice and so perhaps the check wasn't required. - 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore by drivers and it was used just to print old-state:new-state. The debug prints are called from mxs_irq_clear() now based on the state-name passed to it. The printed name will be same for shutdown and resume states as they use the same callback pointer. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-18 16:24:28 +05:30
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clockevents/drivers/mxs: Migrate to new 'set-state' interface Migrate mxs driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Also drop: - 'mxs_clockevent_mode': as we have helpers available from core for the same. same state twice and so perhaps the check wasn't required. - 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore by drivers and it was used just to print old-state:new-state. The debug prints are called from mxs_irq_clear() now based on the state-name passed to it. The printed name will be same for shutdown and resume states as they use the same callback pointer. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-18 16:24:28 +05:30
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clockevents/drivers/mxs: Migrate to new 'set-state' interface Migrate mxs driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Also drop: - 'mxs_clockevent_mode': as we have helpers available from core for the same. same state twice and so perhaps the check wasn't required. - 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore by drivers and it was used just to print old-state:new-state. The debug prints are called from mxs_irq_clear() now based on the state-name passed to it. The printed name will be same for shutdown and resume states as they use the same callback pointer. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-18 16:24:28 +05:30
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clockevents/drivers/mxs: Migrate to new 'set-state' interface Migrate mxs driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Also drop: - 'mxs_clockevent_mode': as we have helpers available from core for the same. same state twice and so perhaps the check wasn't required. - 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore by drivers and it was used just to print old-state:new-state. The debug prints are called from mxs_irq_clear() now based on the state-name passed to it. The printed name will be same for shutdown and resume states as they use the same callback pointer. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-18 16:24:28 +05:30
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: use clockevents_config_and_register() where possible The clockevent core is able to figure out the best mult and shift, calculate min_delta_ns and max_delta_ns, with the necessary info passed into clockevents_config_and_register(). Use this combined configure and register function where possible to make the codes less error prone and gain some positive diff stat. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Tested-by: Roland Stigge <stigge@antcom.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brown <davidb@codeaurora.org> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Barry Song <baohua.song@csr.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-12 11:50:05 +00:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: use clockevents_config_and_register() where possible The clockevent core is able to figure out the best mult and shift, calculate min_delta_ns and max_delta_ns, with the necessary info passed into clockevents_config_and_register(). Use this combined configure and register function where possible to make the codes less error prone and gain some positive diff stat. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Tested-by: Roland Stigge <stigge@antcom.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brown <davidb@codeaurora.org> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Barry Song <baohua.song@csr.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-12 11:50:05 +00:00
ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles Signed-off-by: Torben Hohn <torbenh@linutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-21 15:06:16 +01:00
ARM: use clockevents_config_and_register() where possible The clockevent core is able to figure out the best mult and shift, calculate min_delta_ns and max_delta_ns, with the necessary info passed into clockevents_config_and_register(). Use this combined configure and register function where possible to make the codes less error prone and gain some positive diff stat. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Tested-by: Roland Stigge <stigge@antcom.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brown <davidb@codeaurora.org> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Barry Song <baohua.song@csr.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-12 11:50:05 +00:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clocksource: convert MXS timrotv2 to 32-bit down counting clocksource Convert the MXS timrotv2 32-bit down counting clocksource to the generic clocksource infrastructure. Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-08 17:21:49 +01:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clocksource: mxs_timer: Switch to sched_clock_register() The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Shawn Guo <shawn.guo@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-07-18 16:21:23 -07:00
ARM: mxs: Setup scheduler clock Setup scheduler clock on ARM MXS platforms with a 32-bit timrot such as i.MX28. This allows the scheduler to use sub-jiffy resolution. The corresponding change for 16-bit v1 timrots is not possible at the moment due to rounding issues with clock values wrapping faster than once per several seconds in the common ARM platform code. Signed-off-by: Stanislav Meduna <stano@meduna.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-08 23:39:14 +01:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clocksource: convert MXS timrotv2 to 32-bit down counting clocksource Convert the MXS timrotv2 32-bit down counting clocksource to the generic clocksource infrastructure. Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-08 17:21:49 +01:00
ARM: mxs: Setup scheduler clock Setup scheduler clock on ARM MXS platforms with a 32-bit timrot such as i.MX28. This allows the scheduler to use sub-jiffy resolution. The corresponding change for 16-bit v1 timrots is not possible at the moment due to rounding issues with clock values wrapping faster than once per several seconds in the common ARM platform code. Signed-off-by: Stanislav Meduna <stano@meduna.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-08 23:39:14 +01:00
clocksource: convert MXS timrotv2 to 32-bit down counting clocksource Convert the MXS timrotv2 32-bit down counting clocksource to the generic clocksource infrastructure. Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-08 17:21:49 +01:00
clocksource: mxs_timer: Switch to sched_clock_register() The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Shawn Guo <shawn.guo@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-07-18 16:21:23 -07:00
ARM: mxs: Setup scheduler clock Setup scheduler clock on ARM MXS platforms with a 32-bit timrot such as i.MX28. This allows the scheduler to use sub-jiffy resolution. The corresponding change for 16-bit v1 timrots is not possible at the moment due to rounding issues with clock values wrapping faster than once per several seconds in the common ARM platform code. Signed-off-by: Stanislav Meduna <stano@meduna.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-08 23:39:14 +01:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clocksource/drivers/mxs: Convert init function to return error The init function does not return any error, it prints a message, returns and lets the caller unaware if the state of the system. Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:03 +02:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: remove now unused timer_clk argument from mxs_timer_init With old mxs clock support removed, the timer_clk argument of mxs_timer_init is unused now, so remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-04-29 00:02:41 +08:00
clocksource/drivers/mxs: Convert init function to return error The init function does not return any error, it prints a message, returns and lets the caller unaware if the state of the system. Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:03 +02:00
ARM: mxs: retrieve timer irq from device tree Rather than using the static timer irq definition, we should retrieve timer irq from device tree for better. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-20 08:51:45 +08:00
ARM: mxs: get timrot base address from device tree Instead of using static defines, it gets timrot base address with mapping from device tree. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-25 14:57:41 +08:00
ARM: mxs: look up timrot clock from device tree Change call clk_get_sys() to of_clk_get() to look up timrot clock from device tree, so that the clk_register_clkdev() call for timrot can be saved in clock driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-25 22:57:14 +08:00
ARM: mxs: remove now unused timer_clk argument from mxs_timer_init With old mxs clock support removed, the timer_clk argument of mxs_timer_init is unused now, so remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-04-29 00:02:41 +08:00
clocksource/drivers/mxs: Convert init function to return error The init function does not return any error, it prints a message, returns and lets the caller unaware if the state of the system. Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:03 +02:00
ARM: mxs: request clock for timer When mxs_timer_init() does not have a timer_clk passed in, it should try to request clock from clkdev system. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-04-29 00:02:37 +08:00
clocksource/drivers/mxs: Convert init function to return error The init function does not return any error, it prints a message, returns and lets the caller unaware if the state of the system. Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:03 +02:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: select STMP_DEVICE and use it for timer code Select STMP_DEVICE and in timer code replace mxs_reset_block() with stmp_reset_block(), use STMP_OFFSET_REG_SET/CLR to replace __mxs_setl/clrl. As the result, <mach/mxs.h> and <mach/common.h> includsion can be removed from timer.c now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-25 20:04:34 +08:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: remove cpu_is_mx23() call from timer code Remove cpu_is_mx23() call from timer code by using of_device_is_compatible() instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-25 19:41:39 +08:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: use apbx bus clock to drive the timers on timrotv2 timer resolution of ~32us is pretty low. v2 has 32bits resolution, so we have quite some headroom, and can use the 24MHz clock. v1 has only 16bits, so we only increase v2. So we just exchange the timrot clock in imx28. On imx23 we have timrotv1 and everything stays the same. Signed-off-by: Torben Hohn <torbenh@linutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-21 15:06:15 +01:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: use apbx bus clock to drive the timers on timrotv2 timer resolution of ~32us is pretty low. v2 has 32bits resolution, so we have quite some headroom, and can use the 24MHz clock. v1 has only 16bits, so we only increase v2. So we just exchange the timrot clock in imx28. On imx23 we have timrotv1 and everything stays the same. Signed-off-by: Torben Hohn <torbenh@linutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-21 15:06:15 +01:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clocksource/drivers/mxs: Convert init function to return error The init function does not return any error, it prints a message, returns and lets the caller unaware if the state of the system. Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:03 +02:00
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
ARM: mxs: retrieve timer irq from device tree Rather than using the static timer irq definition, we should retrieve timer irq from device tree for better. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-20 08:51:45 +08:00
clocksource/drivers/mxs: Convert init function to return error The init function does not return any error, it prints a message, returns and lets the caller unaware if the state of the system. Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:03 +02:00
clocksource: Replace setup_irq() by request_irq() request_irq() is preferred over setup_irq(). The early boot setup_irq() invocations happen either via 'init_IRQ()' or 'time_init()', while memory allocators are ready by 'mm_init()'. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). Seldom remove_irq() usage has been observed coupled with setup_irq(), wherever that has been found, it too has been replaced by free_irq(). A build error that was reported by kbuild test robot <lkp@intel.com> in the previous version of the patch also has been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/91961c77c1cf93d41523f5e1ac52043f32f97077.1582799709.git.afzal.mohd.ma@gmail.com
2020-02-27 16:29:02 +05:30
ARM: mxs: Add timer support There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-18 21:39:30 +08:00
clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-26 16:56:11 +02:00