linux/drivers/gpu/drm/drm_of.c

611 lines
17 KiB

drm: Add modeset object iterators And roll them out across drm_* files. The point here isn't code prettification (it helps with that too) but that some of these lists aren't static any more. And having macros will gives us a convenient place to put locking checks into. I didn't add an iterator for props since that's only used by a list_for_each_entry_safe in the driver teardown code. Search&replace was done with the below cocci spatch. Note that there's a bunch more places that didn't match and which would need some manual changes, but I've intentially left these out for this mostly automated patch. iterator name drm_for_each_crtc; struct drm_crtc *crtc; struct drm_device *dev; expression head; @@ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + drm_for_each_crtc (crtc, dev) { ... } @@ iterator name drm_for_each_encoder; struct drm_encoder *encoder; struct drm_device *dev; expression head; @@ - list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + drm_for_each_encoder (encoder, dev) { ... } @@ iterator name drm_for_each_fb; struct drm_framebuffer *fb; struct drm_device *dev; expression head; @@ - list_for_each_entry(fb, &dev->mode_config.fb_list, head) { + drm_for_each_fb (fb, dev) { ... } @@ iterator name drm_for_each_connector; struct drm_connector *connector; struct drm_device *dev; expression head; @@ - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + drm_for_each_connector (connector, dev) { ... } Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-07-09 23:44:25 +02:00
drm: Convert to using %pOF instead of full_name Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Partially-Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul changed subject prefix and fixed conflict in stm/ltdc.c] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-18 16:43:04 -05:00
Revert "drm: of: Properly try all possible cases for bridge/panel detection" Commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")' introduced the ability to describe a panel under a display controller without having to use a graph to connect the controller to its single child panel (or bridge). The implementation of this would find the first non-graph node and attempt to acquire the related panel or bridge. This prevents cases where any other child node, such as a aux bus for a DisplayPort controller, or an opp-table to find the referenced panel. Commit '67bae5f28c89 ("drm: of: Properly try all possible cases for bridge/panel detection")' attempted to solve this problem by not bypassing the graph reference lookup before attempting to find the panel or bridge. While this does solve the case where a proper graph reference is present, it does not allow the caller to distinguish between a yet-to-be-probed panel or bridge and the absence of a reference to a panel. One such case is a DisplayPort controller that on some boards have an explicitly described reference to a panel, but on others have a discoverable DisplayPort display attached (which doesn't need to be expressed in DeviceTree). This reverts commit '67bae5f28c89 ("drm: of: Properly try all possible cases for bridge/panel detection")', as a step towards reverting commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")'. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220420231230.58499-1-bjorn.andersson@linaro.org
2022-04-20 16:12:29 -07:00
Revert "drm: of: Properly try all possible cases for bridge/panel detection" Commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")' introduced the ability to describe a panel under a display controller without having to use a graph to connect the controller to its single child panel (or bridge). The implementation of this would find the first non-graph node and attempt to acquire the related panel or bridge. This prevents cases where any other child node, such as a aux bus for a DisplayPort controller, or an opp-table to find the referenced panel. Commit '67bae5f28c89 ("drm: of: Properly try all possible cases for bridge/panel detection")' attempted to solve this problem by not bypassing the graph reference lookup before attempting to find the panel or bridge. While this does solve the case where a proper graph reference is present, it does not allow the caller to distinguish between a yet-to-be-probed panel or bridge and the absence of a reference to a panel. One such case is a DisplayPort controller that on some boards have an explicitly described reference to a panel, but on others have a discoverable DisplayPort display attached (which doesn't need to be expressed in DeviceTree). This reverts commit '67bae5f28c89 ("drm: of: Properly try all possible cases for bridge/panel detection")', as a step towards reverting commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")'. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220420231230.58499-1-bjorn.andersson@linaro.org
2022-04-20 16:12:29 -07:00
Revert "drm: of: Properly try all possible cases for bridge/panel detection" Commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")' introduced the ability to describe a panel under a display controller without having to use a graph to connect the controller to its single child panel (or bridge). The implementation of this would find the first non-graph node and attempt to acquire the related panel or bridge. This prevents cases where any other child node, such as a aux bus for a DisplayPort controller, or an opp-table to find the referenced panel. Commit '67bae5f28c89 ("drm: of: Properly try all possible cases for bridge/panel detection")' attempted to solve this problem by not bypassing the graph reference lookup before attempting to find the panel or bridge. While this does solve the case where a proper graph reference is present, it does not allow the caller to distinguish between a yet-to-be-probed panel or bridge and the absence of a reference to a panel. One such case is a DisplayPort controller that on some boards have an explicitly described reference to a panel, but on others have a discoverable DisplayPort display attached (which doesn't need to be expressed in DeviceTree). This reverts commit '67bae5f28c89 ("drm: of: Properly try all possible cases for bridge/panel detection")', as a step towards reverting commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")'. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220420231230.58499-1-bjorn.andersson@linaro.org
2022-04-20 16:12:29 -07:00