linux/drivers/input/touchscreen/silead.c

831 lines
22 KiB

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 08:55:06 +02:00
Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09 22:29:49 -07:00
Input: silead - add support for EFI-embedded fw using different min/max coordinates Unfortunately, at the time of writing this commit message, we have been unable to get permission from Silead, or from device OEMs, to distribute the necessary Silead firmware files in linux-firmware. On a whole bunch of devices the UEFI BIOS code contains a touchscreen driver, which contains an embedded copy of the firmware. The fw-loader code has a "platform" fallback mechanism, which together with info on the firmware from drivers/platform/x86/touchscreen_dmi.c will use the firmware from the UEFI driver when the firmware is missing from /lib/firmware. This makes the touchscreen work OOTB without users needing to manually download the firmware. The firmware bundled with the original Windows/Android is usually newer then the firmware in the UEFI driver and it is better calibrated. This better calibration can lead to significant differences in the reported min/max coordinates. Add support for a new (optional) "silead,efi-fw-min-max" property which provides a set of alternative min/max values to use for the x/y axis when the EFI embedded firmware is used. The new property is only used on (x86) devices which do not use devicetree, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing silead devicetree-bindings documentation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211122220637.11386-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-12 21:05:29 -08:00
Input: silead - add support for EFI-embedded fw using different min/max coordinates Unfortunately, at the time of writing this commit message, we have been unable to get permission from Silead, or from device OEMs, to distribute the necessary Silead firmware files in linux-firmware. On a whole bunch of devices the UEFI BIOS code contains a touchscreen driver, which contains an embedded copy of the firmware. The fw-loader code has a "platform" fallback mechanism, which together with info on the firmware from drivers/platform/x86/touchscreen_dmi.c will use the firmware from the UEFI driver when the firmware is missing from /lib/firmware. This makes the touchscreen work OOTB without users needing to manually download the firmware. The firmware bundled with the original Windows/Android is usually newer then the firmware in the UEFI driver and it is better calibrated. This better calibration can lead to significant differences in the reported min/max coordinates. Add support for a new (optional) "silead,efi-fw-min-max" property which provides a set of alternative min/max values to use for the x/y axis when the EFI embedded firmware is used. The new property is only used on (x86) devices which do not use devicetree, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing silead devicetree-bindings documentation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211122220637.11386-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-12 21:05:29 -08:00
Input: silead - add support for EFI-embedded fw using different min/max coordinates Unfortunately, at the time of writing this commit message, we have been unable to get permission from Silead, or from device OEMs, to distribute the necessary Silead firmware files in linux-firmware. On a whole bunch of devices the UEFI BIOS code contains a touchscreen driver, which contains an embedded copy of the firmware. The fw-loader code has a "platform" fallback mechanism, which together with info on the firmware from drivers/platform/x86/touchscreen_dmi.c will use the firmware from the UEFI driver when the firmware is missing from /lib/firmware. This makes the touchscreen work OOTB without users needing to manually download the firmware. The firmware bundled with the original Windows/Android is usually newer then the firmware in the UEFI driver and it is better calibrated. This better calibration can lead to significant differences in the reported min/max coordinates. Add support for a new (optional) "silead,efi-fw-min-max" property which provides a set of alternative min/max values to use for the x/y axis when the EFI embedded firmware is used. The new property is only used on (x86) devices which do not use devicetree, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing silead devicetree-bindings documentation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211122220637.11386-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-12 21:05:29 -08:00
Input: silead - add support for EFI-embedded fw using different min/max coordinates Unfortunately, at the time of writing this commit message, we have been unable to get permission from Silead, or from device OEMs, to distribute the necessary Silead firmware files in linux-firmware. On a whole bunch of devices the UEFI BIOS code contains a touchscreen driver, which contains an embedded copy of the firmware. The fw-loader code has a "platform" fallback mechanism, which together with info on the firmware from drivers/platform/x86/touchscreen_dmi.c will use the firmware from the UEFI driver when the firmware is missing from /lib/firmware. This makes the touchscreen work OOTB without users needing to manually download the firmware. The firmware bundled with the original Windows/Android is usually newer then the firmware in the UEFI driver and it is better calibrated. This better calibration can lead to significant differences in the reported min/max coordinates. Add support for a new (optional) "silead,efi-fw-min-max" property which provides a set of alternative min/max values to use for the x/y axis when the EFI embedded firmware is used. The new property is only used on (x86) devices which do not use devicetree, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing silead devicetree-bindings documentation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211122220637.11386-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-12 21:05:29 -08:00
Input: silead - add support for EFI-embedded fw using different min/max coordinates Unfortunately, at the time of writing this commit message, we have been unable to get permission from Silead, or from device OEMs, to distribute the necessary Silead firmware files in linux-firmware. On a whole bunch of devices the UEFI BIOS code contains a touchscreen driver, which contains an embedded copy of the firmware. The fw-loader code has a "platform" fallback mechanism, which together with info on the firmware from drivers/platform/x86/touchscreen_dmi.c will use the firmware from the UEFI driver when the firmware is missing from /lib/firmware. This makes the touchscreen work OOTB without users needing to manually download the firmware. The firmware bundled with the original Windows/Android is usually newer then the firmware in the UEFI driver and it is better calibrated. This better calibration can lead to significant differences in the reported min/max coordinates. Add support for a new (optional) "silead,efi-fw-min-max" property which provides a set of alternative min/max values to use for the x/y axis when the EFI embedded firmware is used. The new property is only used on (x86) devices which do not use devicetree, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing silead devicetree-bindings documentation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211122220637.11386-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-12 21:05:29 -08:00
Input: silead - add support for EFI-embedded fw using different min/max coordinates Unfortunately, at the time of writing this commit message, we have been unable to get permission from Silead, or from device OEMs, to distribute the necessary Silead firmware files in linux-firmware. On a whole bunch of devices the UEFI BIOS code contains a touchscreen driver, which contains an embedded copy of the firmware. The fw-loader code has a "platform" fallback mechanism, which together with info on the firmware from drivers/platform/x86/touchscreen_dmi.c will use the firmware from the UEFI driver when the firmware is missing from /lib/firmware. This makes the touchscreen work OOTB without users needing to manually download the firmware. The firmware bundled with the original Windows/Android is usually newer then the firmware in the UEFI driver and it is better calibrated. This better calibration can lead to significant differences in the reported min/max coordinates. Add support for a new (optional) "silead,efi-fw-min-max" property which provides a set of alternative min/max values to use for the x/y axis when the EFI embedded firmware is used. The new property is only used on (x86) devices which do not use devicetree, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing silead devicetree-bindings documentation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211122220637.11386-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-12 21:05:29 -08:00
Input: silead - add support for EFI-embedded fw using different min/max coordinates Unfortunately, at the time of writing this commit message, we have been unable to get permission from Silead, or from device OEMs, to distribute the necessary Silead firmware files in linux-firmware. On a whole bunch of devices the UEFI BIOS code contains a touchscreen driver, which contains an embedded copy of the firmware. The fw-loader code has a "platform" fallback mechanism, which together with info on the firmware from drivers/platform/x86/touchscreen_dmi.c will use the firmware from the UEFI driver when the firmware is missing from /lib/firmware. This makes the touchscreen work OOTB without users needing to manually download the firmware. The firmware bundled with the original Windows/Android is usually newer then the firmware in the UEFI driver and it is better calibrated. This better calibration can lead to significant differences in the reported min/max coordinates. Add support for a new (optional) "silead,efi-fw-min-max" property which provides a set of alternative min/max values to use for the x/y axis when the EFI embedded firmware is used. The new property is only used on (x86) devices which do not use devicetree, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing silead devicetree-bindings documentation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211122220637.11386-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-12 21:05:29 -08:00
Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09 22:29:49 -07:00
Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09 22:29:49 -07:00
Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09 22:29:49 -07:00
Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09 22:29:49 -07:00