linux/drivers/mtd/mtd_blkdevs.c

542 lines
12 KiB

block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus-1 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits) [media] rc: update for bitop name changes fs: simplify iget & friends fs: pull inode->i_lock up out of writeback_single_inode fs: rename inode_lock to inode_hash_lock fs: move i_wb_list out from under inode_lock fs: move i_sb_list out from under inode_lock fs: remove inode_lock from iput_final and prune_icache fs: Lock the inode LRU list separately fs: factor inode disposal fs: protect inode->i_state with inode->i_lock lib, arch: add filter argument to show_mem and fix private implementations SLUB: Write to per cpu data when allocating it slub: Fix debugobjects with lockless fastpath autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd() autofs4 - remove autofs4_lock autofs4 - fix d_manage() return on rcu-walk autofs4 - fix autofs4_expire_indirect() traversal autofs4 - fix dentry leak in autofs4_expire_direct() autofs4 - reinstate last used update on access vfs - check non-mountpoint dentry might block in __follow_mount_rcu() ... NOTE! This merge commit was created to fix compilation error. The block tree was merged upstream and removed the 'elv_queue_empty()' function which the new 'mtdswap' driver is using. So a simple merge of the mtd tree with upstream does not compile. And the mtd tree has already be published, so re-basing it is not an option. To fix this unfortunate situation, I had to merge upstream into the mtd-2.6.git tree without committing, put the fixup patch on top of this, and then commit this. The result is that we do not have commits which do not compile. In other words, this merge commit "merges" 3 things: the MTD tree, the upstream tree, and the fixup patch.
2011-03-25 17:41:20 +02:00
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus-1 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits) [media] rc: update for bitop name changes fs: simplify iget & friends fs: pull inode->i_lock up out of writeback_single_inode fs: rename inode_lock to inode_hash_lock fs: move i_wb_list out from under inode_lock fs: move i_sb_list out from under inode_lock fs: remove inode_lock from iput_final and prune_icache fs: Lock the inode LRU list separately fs: factor inode disposal fs: protect inode->i_state with inode->i_lock lib, arch: add filter argument to show_mem and fix private implementations SLUB: Write to per cpu data when allocating it slub: Fix debugobjects with lockless fastpath autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd() autofs4 - remove autofs4_lock autofs4 - fix d_manage() return on rcu-walk autofs4 - fix autofs4_expire_indirect() traversal autofs4 - fix dentry leak in autofs4_expire_direct() autofs4 - reinstate last used update on access vfs - check non-mountpoint dentry might block in __follow_mount_rcu() ... NOTE! This merge commit was created to fix compilation error. The block tree was merged upstream and removed the 'elv_queue_empty()' function which the new 'mtdswap' driver is using. So a simple merge of the mtd tree with upstream does not compile. And the mtd tree has already be published, so re-basing it is not an option. To fix this unfortunate situation, I had to merge upstream into the mtd-2.6.git tree without committing, put the fixup patch on top of this, and then commit this. The result is that we do not have commits which do not compile. In other words, this merge commit "merges" 3 things: the MTD tree, the upstream tree, and the fixup patch.
2011-03-25 17:41:20 +02:00
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus-1 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits) [media] rc: update for bitop name changes fs: simplify iget & friends fs: pull inode->i_lock up out of writeback_single_inode fs: rename inode_lock to inode_hash_lock fs: move i_wb_list out from under inode_lock fs: move i_sb_list out from under inode_lock fs: remove inode_lock from iput_final and prune_icache fs: Lock the inode LRU list separately fs: factor inode disposal fs: protect inode->i_state with inode->i_lock lib, arch: add filter argument to show_mem and fix private implementations SLUB: Write to per cpu data when allocating it slub: Fix debugobjects with lockless fastpath autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd() autofs4 - remove autofs4_lock autofs4 - fix d_manage() return on rcu-walk autofs4 - fix autofs4_expire_indirect() traversal autofs4 - fix dentry leak in autofs4_expire_direct() autofs4 - reinstate last used update on access vfs - check non-mountpoint dentry might block in __follow_mount_rcu() ... NOTE! This merge commit was created to fix compilation error. The block tree was merged upstream and removed the 'elv_queue_empty()' function which the new 'mtdswap' driver is using. So a simple merge of the mtd tree with upstream does not compile. And the mtd tree has already be published, so re-basing it is not an option. To fix this unfortunate situation, I had to merge upstream into the mtd-2.6.git tree without committing, put the fixup patch on top of this, and then commit this. The result is that we do not have commits which do not compile. In other words, this merge commit "merges" 3 things: the MTD tree, the upstream tree, and the fixup patch.
2011-03-25 17:41:20 +02:00
mtd_blkdevs: avoid soft lockups with some mtd/spi devices With some spi devices, the heavy cpu usage due to polling the spi registers may lead to netdev timeouts, RCU complaints, etc. This can be acute in the absence of CONFIG_PREEMPT. This patch allows to give enough breathing room to avoid those incorrectly detected netdev timeouts for example. Example splat on 5.10.92: [ 828.399306] rcu: INFO: rcu_sched self-detected stall on CPU ... [ 828.419245] Task dump for CPU 1: [ 828.422465] task:kworker/1:1H state:R running task on cpu 1 stack: 0 pid: 76 ppid: 2 flags:0x0000002a [ 828.433132] Workqueue: kblockd blk_mq_run_work_fn [ 828.437820] Call trace: ... [ 828.512267] spi_mem_exec_op+0x4d0/0xde0 [ 828.516184] spi_mem_dirmap_read+0x180/0x39c [ 828.520443] spi_nor_read_data+0x428/0x7e8 [ 828.524523] spi_nor_read+0x154/0x214 [ 828.528172] mtd_read_oob+0x440/0x714 [ 828.531815] mtd_read+0xac/0x120 [ 828.535030] mtdblock_readsect+0x178/0x230 [ 828.539102] mtd_blktrans_work+0x9fc/0xf28 [ 828.543177] mtd_queue_rq+0x1ac/0x2e4 [ 828.546827] blk_mq_dispatch_rq_list+0x2cc/0xa44 [ 828.551419] blk_mq_do_dispatch_sched+0xb0/0x7cc [ 828.556010] __blk_mq_sched_dispatch_requests+0x350/0x494 [ 828.561372] blk_mq_sched_dispatch_requests+0xac/0xe4 [ 828.566387] __blk_mq_run_hw_queue+0x130/0x254 [ 828.570806] blk_mq_run_work_fn+0x50/0x60 [ 828.574814] process_one_work+0x578/0xf1c [ 828.578814] worker_thread+0x5dc/0xea0 [ 828.582547] kthread+0x270/0x2d4 [ 828.585765] ret_from_fork+0x10/0x30 Signed-off-by: David Decotigny <ddecotig@google.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220126101120.676021-1-decot+git@google.com
2022-01-26 02:11:20 -08:00
mtd: allow to unload the mtdtrans module if its block devices aren't open Now it once again possible to remove mtdtrans module. You still need to ensure that block devices of that module aren't mounted. This is due to the fact that as long as a block device is open, it still exists, therefore if we were to allow module removal, this block device might became used again. This time in addition to code review, I also made the code pass some torture tests like module reload in a loop + read in a loop + card insert/removal all at same time. The blktrans_open/blktrans_release don't take the mtd table lock because: While device is added (that includes execution of add_mtd_blktrans_dev) the lock is already taken Now suppose the device will never be removed. In this case even if we have changes in mtd table, the entry that we need will stay exactly the same. (Note that we don't look at table at all, just following private pointer of block device). Now suppose that someone tries to remove the mtd device. This will be propagated to trans driver which _ought_ to call del_mtd_blktrans_dev which will take the per device lock, release the mtd device and set trans->mtd = NULL. >From this point on, following opens won't even be able to know anything about that mtd device (which at that point is likely not to exist) Also the same care is taken not to trip over NULL mtd pointer in blktrans_dev_release. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-15 17:20:43 +02:00
mtd: blkdevs: fix potential deadlock + lockdep warnings Commit 073db4a51ee4 ("mtd: fix: avoid race condition when accessing mtd->usecount") fixed a race condition but due to poor ordering of the mutex acquisition, introduced a potential deadlock. The deadlock can occur, for example, when rmmod'ing the m25p80 module, which will delete one or more MTDs, along with any corresponding mtdblock devices. This could potentially race with an acquisition of the block device as follows. -> blktrans_open() -> mutex_lock(&dev->lock); -> mutex_lock(&mtd_table_mutex); -> del_mtd_device() -> mutex_lock(&mtd_table_mutex); -> blktrans_notify_remove() -> del_mtd_blktrans_dev() -> mutex_lock(&dev->lock); This is a classic (potential) ABBA deadlock, which can be fixed by making the A->B ordering consistent everywhere. There was no real purpose to the ordering in the original patch, AFAIR, so this shouldn't be a problem. This ordering was actually already present in del_mtd_blktrans_dev(), for one, where the function tried to ensure that its caller already held mtd_table_mutex before it acquired &dev->lock: if (mutex_trylock(&mtd_table_mutex)) { mutex_unlock(&mtd_table_mutex); BUG(); } So, reverse the ordering of acquisition of &dev->lock and &mtd_table_mutex so we always acquire mtd_table_mutex first. Snippets of the lockdep output follow: # modprobe -r m25p80 [ 53.419251] [ 53.420838] ====================================================== [ 53.427300] [ INFO: possible circular locking dependency detected ] [ 53.433865] 4.3.0-rc6 #96 Not tainted [ 53.437686] ------------------------------------------------------- [ 53.444220] modprobe/372 is trying to acquire lock: [ 53.449320] (&new->lock){+.+...}, at: [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc [ 53.457271] [ 53.457271] but task is already holding lock: [ 53.463372] (mtd_table_mutex){+.+.+.}, at: [<c0439994>] del_mtd_device+0x18/0x100 [ 53.471321] [ 53.471321] which lock already depends on the new lock. [ 53.471321] [ 53.479856] [ 53.479856] the existing dependency chain (in reverse order) is: [ 53.487660] -> #1 (mtd_table_mutex){+.+.+.}: [ 53.492331] [<c043fc5c>] blktrans_open+0x34/0x1a4 [ 53.497879] [<c01afce0>] __blkdev_get+0xc4/0x3b0 [ 53.503364] [<c01b0bb8>] blkdev_get+0x108/0x320 [ 53.508743] [<c01713c0>] do_dentry_open+0x218/0x314 [ 53.514496] [<c0180454>] path_openat+0x4c0/0xf9c [ 53.519959] [<c0182044>] do_filp_open+0x5c/0xc0 [ 53.525336] [<c0172758>] do_sys_open+0xfc/0x1cc [ 53.530716] [<c000f740>] ret_fast_syscall+0x0/0x1c [ 53.536375] -> #0 (&new->lock){+.+...}: [ 53.540587] [<c063f124>] mutex_lock_nested+0x38/0x3cc [ 53.546504] [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc [ 53.552606] [<c043f164>] blktrans_notify_remove+0x7c/0x84 [ 53.558891] [<c04399f0>] del_mtd_device+0x74/0x100 [ 53.564544] [<c043c670>] del_mtd_partitions+0x80/0xc8 [ 53.570451] [<c0439aa0>] mtd_device_unregister+0x24/0x48 [ 53.576637] [<c046ce6c>] spi_drv_remove+0x1c/0x34 [ 53.582207] [<c03de0f0>] __device_release_driver+0x88/0x114 [ 53.588663] [<c03de19c>] device_release_driver+0x20/0x2c [ 53.594843] [<c03dd9e8>] bus_remove_device+0xd8/0x108 [ 53.600748] [<c03dacc0>] device_del+0x10c/0x210 [ 53.606127] [<c03dadd0>] device_unregister+0xc/0x20 [ 53.611849] [<c046d878>] __unregister+0x10/0x20 [ 53.617211] [<c03da868>] device_for_each_child+0x50/0x7c [ 53.623387] [<c046eae8>] spi_unregister_master+0x58/0x8c [ 53.629578] [<c03e12f0>] release_nodes+0x15c/0x1c8 [ 53.635223] [<c03de0f8>] __device_release_driver+0x90/0x114 [ 53.641689] [<c03de900>] driver_detach+0xb4/0xb8 [ 53.647147] [<c03ddc78>] bus_remove_driver+0x4c/0xa0 [ 53.652970] [<c00cab50>] SyS_delete_module+0x11c/0x1e4 [ 53.658976] [<c000f740>] ret_fast_syscall+0x0/0x1c [ 53.664621] [ 53.664621] other info that might help us debug this: [ 53.664621] [ 53.672979] Possible unsafe locking scenario: [ 53.672979] [ 53.679169] CPU0 CPU1 [ 53.683900] ---- ---- [ 53.688633] lock(mtd_table_mutex); [ 53.692383] lock(&new->lock); [ 53.698306] lock(mtd_table_mutex); [ 53.704658] lock(&new->lock); [ 53.707946] [ 53.707946] *** DEADLOCK *** Fixes: 073db4a51ee4 ("mtd: fix: avoid race condition when accessing mtd->usecount") Reported-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: <stable@vger.kernel.org>
2015-10-26 10:20:23 -07:00
mtd: mtd_blkdevs: don't increase 'open' count on error path Some error paths in mtd_blkdevs were fixed in the following commit: commit 94735ec4044a6d318b83ad3c5794e931ed168d10 mtd: mtd_blkdevs: fix error path in blktrans_open But on these error paths, the block device's `dev->open' count is already incremented before we check for errors. This meant that, while the error path was handled correctly on the first time through blktrans_open(), the device is erroneously considered already open on the second time through. This problem can be seen, for instance, when a UBI volume is simultaneously mounted as a UBIFS partition and read through its corresponding gluebi mtdblockX device. This results in blktrans_open() passing its error checks (with `dev->open > 0') without actually having a handle on the device. Here's a summarized log of the actions and results with nandsim: # modprobe nandsim # modprobe mtdblock # modprobe gluebi # modprobe ubifs # ubiattach /dev/ubi_ctrl -m 0 ... # ubimkvol /dev/ubi0 -N test -s 16MiB ... # mount -t ubifs ubi0:test /mnt # ls /dev/mtdblock* /dev/mtdblock0 /dev/mtdblock1 # cat /dev/mtdblock1 > /dev/null cat: can't open '/dev/mtdblock4': Device or resource busy # cat /dev/mtdblock1 > /dev/null CPU 0 Unable to handle kernel paging request at virtual address fffffff0, epc == 8031536c, ra == 8031f280 Oops[#1]: ... Call Trace: [<8031536c>] ubi_leb_read+0x14/0x164 [<8031f280>] gluebi_read+0xf0/0x148 [<802edba8>] mtdblock_readsect+0x64/0x198 [<802ecfe4>] mtd_blktrans_thread+0x330/0x3f4 [<8005be98>] kthread+0x88/0x90 [<8000bc04>] kernel_thread_helper+0x10/0x18 Cc: stable@kernel.org [3.0+] Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-11-07 15:51:05 -08:00
mtd: allow to unload the mtdtrans module if its block devices aren't open Now it once again possible to remove mtdtrans module. You still need to ensure that block devices of that module aren't mounted. This is due to the fact that as long as a block device is open, it still exists, therefore if we were to allow module removal, this block device might became used again. This time in addition to code review, I also made the code pass some torture tests like module reload in a loop + read in a loop + card insert/removal all at same time. The blktrans_open/blktrans_release don't take the mtd table lock because: While device is added (that includes execution of add_mtd_blktrans_dev) the lock is already taken Now suppose the device will never be removed. In this case even if we have changes in mtd table, the entry that we need will stay exactly the same. (Note that we don't look at table at all, just following private pointer of block device). Now suppose that someone tries to remove the mtd device. This will be propagated to trans driver which _ought_ to call del_mtd_blktrans_dev which will take the per device lock, release the mtd device and set trans->mtd = NULL. >From this point on, following opens won't even be able to know anything about that mtd device (which at that point is likely not to exist) Also the same care is taken not to trip over NULL mtd pointer in blktrans_dev_release. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-15 17:20:43 +02:00
mtd: mtd_blkdevs: don't increase 'open' count on error path Some error paths in mtd_blkdevs were fixed in the following commit: commit 94735ec4044a6d318b83ad3c5794e931ed168d10 mtd: mtd_blkdevs: fix error path in blktrans_open But on these error paths, the block device's `dev->open' count is already incremented before we check for errors. This meant that, while the error path was handled correctly on the first time through blktrans_open(), the device is erroneously considered already open on the second time through. This problem can be seen, for instance, when a UBI volume is simultaneously mounted as a UBIFS partition and read through its corresponding gluebi mtdblockX device. This results in blktrans_open() passing its error checks (with `dev->open > 0') without actually having a handle on the device. Here's a summarized log of the actions and results with nandsim: # modprobe nandsim # modprobe mtdblock # modprobe gluebi # modprobe ubifs # ubiattach /dev/ubi_ctrl -m 0 ... # ubimkvol /dev/ubi0 -N test -s 16MiB ... # mount -t ubifs ubi0:test /mnt # ls /dev/mtdblock* /dev/mtdblock0 /dev/mtdblock1 # cat /dev/mtdblock1 > /dev/null cat: can't open '/dev/mtdblock4': Device or resource busy # cat /dev/mtdblock1 > /dev/null CPU 0 Unable to handle kernel paging request at virtual address fffffff0, epc == 8031536c, ra == 8031f280 Oops[#1]: ... Call Trace: [<8031536c>] ubi_leb_read+0x14/0x164 [<8031f280>] gluebi_read+0xf0/0x148 [<802edba8>] mtdblock_readsect+0x64/0x198 [<802ecfe4>] mtd_blktrans_thread+0x330/0x3f4 [<8005be98>] kthread+0x88/0x90 [<8000bc04>] kernel_thread_helper+0x10/0x18 Cc: stable@kernel.org [3.0+] Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-11-07 15:51:05 -08:00
mtd: blkdevs: fix potential deadlock + lockdep warnings Commit 073db4a51ee4 ("mtd: fix: avoid race condition when accessing mtd->usecount") fixed a race condition but due to poor ordering of the mutex acquisition, introduced a potential deadlock. The deadlock can occur, for example, when rmmod'ing the m25p80 module, which will delete one or more MTDs, along with any corresponding mtdblock devices. This could potentially race with an acquisition of the block device as follows. -> blktrans_open() -> mutex_lock(&dev->lock); -> mutex_lock(&mtd_table_mutex); -> del_mtd_device() -> mutex_lock(&mtd_table_mutex); -> blktrans_notify_remove() -> del_mtd_blktrans_dev() -> mutex_lock(&dev->lock); This is a classic (potential) ABBA deadlock, which can be fixed by making the A->B ordering consistent everywhere. There was no real purpose to the ordering in the original patch, AFAIR, so this shouldn't be a problem. This ordering was actually already present in del_mtd_blktrans_dev(), for one, where the function tried to ensure that its caller already held mtd_table_mutex before it acquired &dev->lock: if (mutex_trylock(&mtd_table_mutex)) { mutex_unlock(&mtd_table_mutex); BUG(); } So, reverse the ordering of acquisition of &dev->lock and &mtd_table_mutex so we always acquire mtd_table_mutex first. Snippets of the lockdep output follow: # modprobe -r m25p80 [ 53.419251] [ 53.420838] ====================================================== [ 53.427300] [ INFO: possible circular locking dependency detected ] [ 53.433865] 4.3.0-rc6 #96 Not tainted [ 53.437686] ------------------------------------------------------- [ 53.444220] modprobe/372 is trying to acquire lock: [ 53.449320] (&new->lock){+.+...}, at: [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc [ 53.457271] [ 53.457271] but task is already holding lock: [ 53.463372] (mtd_table_mutex){+.+.+.}, at: [<c0439994>] del_mtd_device+0x18/0x100 [ 53.471321] [ 53.471321] which lock already depends on the new lock. [ 53.471321] [ 53.479856] [ 53.479856] the existing dependency chain (in reverse order) is: [ 53.487660] -> #1 (mtd_table_mutex){+.+.+.}: [ 53.492331] [<c043fc5c>] blktrans_open+0x34/0x1a4 [ 53.497879] [<c01afce0>] __blkdev_get+0xc4/0x3b0 [ 53.503364] [<c01b0bb8>] blkdev_get+0x108/0x320 [ 53.508743] [<c01713c0>] do_dentry_open+0x218/0x314 [ 53.514496] [<c0180454>] path_openat+0x4c0/0xf9c [ 53.519959] [<c0182044>] do_filp_open+0x5c/0xc0 [ 53.525336] [<c0172758>] do_sys_open+0xfc/0x1cc [ 53.530716] [<c000f740>] ret_fast_syscall+0x0/0x1c [ 53.536375] -> #0 (&new->lock){+.+...}: [ 53.540587] [<c063f124>] mutex_lock_nested+0x38/0x3cc [ 53.546504] [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc [ 53.552606] [<c043f164>] blktrans_notify_remove+0x7c/0x84 [ 53.558891] [<c04399f0>] del_mtd_device+0x74/0x100 [ 53.564544] [<c043c670>] del_mtd_partitions+0x80/0xc8 [ 53.570451] [<c0439aa0>] mtd_device_unregister+0x24/0x48 [ 53.576637] [<c046ce6c>] spi_drv_remove+0x1c/0x34 [ 53.582207] [<c03de0f0>] __device_release_driver+0x88/0x114 [ 53.588663] [<c03de19c>] device_release_driver+0x20/0x2c [ 53.594843] [<c03dd9e8>] bus_remove_device+0xd8/0x108 [ 53.600748] [<c03dacc0>] device_del+0x10c/0x210 [ 53.606127] [<c03dadd0>] device_unregister+0xc/0x20 [ 53.611849] [<c046d878>] __unregister+0x10/0x20 [ 53.617211] [<c03da868>] device_for_each_child+0x50/0x7c [ 53.623387] [<c046eae8>] spi_unregister_master+0x58/0x8c [ 53.629578] [<c03e12f0>] release_nodes+0x15c/0x1c8 [ 53.635223] [<c03de0f8>] __device_release_driver+0x90/0x114 [ 53.641689] [<c03de900>] driver_detach+0xb4/0xb8 [ 53.647147] [<c03ddc78>] bus_remove_driver+0x4c/0xa0 [ 53.652970] [<c00cab50>] SyS_delete_module+0x11c/0x1e4 [ 53.658976] [<c000f740>] ret_fast_syscall+0x0/0x1c [ 53.664621] [ 53.664621] other info that might help us debug this: [ 53.664621] [ 53.672979] Possible unsafe locking scenario: [ 53.672979] [ 53.679169] CPU0 CPU1 [ 53.683900] ---- ---- [ 53.688633] lock(mtd_table_mutex); [ 53.692383] lock(&new->lock); [ 53.698306] lock(mtd_table_mutex); [ 53.704658] lock(&new->lock); [ 53.707946] [ 53.707946] *** DEADLOCK *** Fixes: 073db4a51ee4 ("mtd: fix: avoid race condition when accessing mtd->usecount") Reported-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: <stable@vger.kernel.org>
2015-10-26 10:20:23 -07:00
mtd: allow to unload the mtdtrans module if its block devices aren't open Now it once again possible to remove mtdtrans module. You still need to ensure that block devices of that module aren't mounted. This is due to the fact that as long as a block device is open, it still exists, therefore if we were to allow module removal, this block device might became used again. This time in addition to code review, I also made the code pass some torture tests like module reload in a loop + read in a loop + card insert/removal all at same time. The blktrans_open/blktrans_release don't take the mtd table lock because: While device is added (that includes execution of add_mtd_blktrans_dev) the lock is already taken Now suppose the device will never be removed. In this case even if we have changes in mtd table, the entry that we need will stay exactly the same. (Note that we don't look at table at all, just following private pointer of block device). Now suppose that someone tries to remove the mtd device. This will be propagated to trans driver which _ought_ to call del_mtd_blktrans_dev which will take the per device lock, release the mtd device and set trans->mtd = NULL. >From this point on, following opens won't even be able to know anything about that mtd device (which at that point is likely not to exist) Also the same care is taken not to trip over NULL mtd pointer in blktrans_dev_release. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-15 17:20:43 +02:00
mtd: allow to unload the mtdtrans module if its block devices aren't open Now it once again possible to remove mtdtrans module. You still need to ensure that block devices of that module aren't mounted. This is due to the fact that as long as a block device is open, it still exists, therefore if we were to allow module removal, this block device might became used again. This time in addition to code review, I also made the code pass some torture tests like module reload in a loop + read in a loop + card insert/removal all at same time. The blktrans_open/blktrans_release don't take the mtd table lock because: While device is added (that includes execution of add_mtd_blktrans_dev) the lock is already taken Now suppose the device will never be removed. In this case even if we have changes in mtd table, the entry that we need will stay exactly the same. (Note that we don't look at table at all, just following private pointer of block device). Now suppose that someone tries to remove the mtd device. This will be propagated to trans driver which _ought_ to call del_mtd_blktrans_dev which will take the per device lock, release the mtd device and set trans->mtd = NULL. >From this point on, following opens won't even be able to know anything about that mtd device (which at that point is likely not to exist) Also the same care is taken not to trip over NULL mtd pointer in blktrans_dev_release. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-15 17:20:43 +02:00
mtd: allow to unload the mtdtrans module if its block devices aren't open Now it once again possible to remove mtdtrans module. You still need to ensure that block devices of that module aren't mounted. This is due to the fact that as long as a block device is open, it still exists, therefore if we were to allow module removal, this block device might became used again. This time in addition to code review, I also made the code pass some torture tests like module reload in a loop + read in a loop + card insert/removal all at same time. The blktrans_open/blktrans_release don't take the mtd table lock because: While device is added (that includes execution of add_mtd_blktrans_dev) the lock is already taken Now suppose the device will never be removed. In this case even if we have changes in mtd table, the entry that we need will stay exactly the same. (Note that we don't look at table at all, just following private pointer of block device). Now suppose that someone tries to remove the mtd device. This will be propagated to trans driver which _ought_ to call del_mtd_blktrans_dev which will take the per device lock, release the mtd device and set trans->mtd = NULL. >From this point on, following opens won't even be able to know anything about that mtd device (which at that point is likely not to exist) Also the same care is taken not to trip over NULL mtd pointer in blktrans_dev_release. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-15 17:20:43 +02:00
mtd: allow to unload the mtdtrans module if its block devices aren't open Now it once again possible to remove mtdtrans module. You still need to ensure that block devices of that module aren't mounted. This is due to the fact that as long as a block device is open, it still exists, therefore if we were to allow module removal, this block device might became used again. This time in addition to code review, I also made the code pass some torture tests like module reload in a loop + read in a loop + card insert/removal all at same time. The blktrans_open/blktrans_release don't take the mtd table lock because: While device is added (that includes execution of add_mtd_blktrans_dev) the lock is already taken Now suppose the device will never be removed. In this case even if we have changes in mtd table, the entry that we need will stay exactly the same. (Note that we don't look at table at all, just following private pointer of block device). Now suppose that someone tries to remove the mtd device. This will be propagated to trans driver which _ought_ to call del_mtd_blktrans_dev which will take the per device lock, release the mtd device and set trans->mtd = NULL. >From this point on, following opens won't even be able to know anything about that mtd device (which at that point is likely not to exist) Also the same care is taken not to trip over NULL mtd pointer in blktrans_dev_release. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-15 17:20:43 +02:00
mtd: allow to unload the mtdtrans module if its block devices aren't open Now it once again possible to remove mtdtrans module. You still need to ensure that block devices of that module aren't mounted. This is due to the fact that as long as a block device is open, it still exists, therefore if we were to allow module removal, this block device might became used again. This time in addition to code review, I also made the code pass some torture tests like module reload in a loop + read in a loop + card insert/removal all at same time. The blktrans_open/blktrans_release don't take the mtd table lock because: While device is added (that includes execution of add_mtd_blktrans_dev) the lock is already taken Now suppose the device will never be removed. In this case even if we have changes in mtd table, the entry that we need will stay exactly the same. (Note that we don't look at table at all, just following private pointer of block device). Now suppose that someone tries to remove the mtd device. This will be propagated to trans driver which _ought_ to call del_mtd_blktrans_dev which will take the per device lock, release the mtd device and set trans->mtd = NULL. >From this point on, following opens won't even be able to know anything about that mtd device (which at that point is likely not to exist) Also the same care is taken not to trip over NULL mtd pointer in blktrans_dev_release. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-15 17:20:43 +02:00
mtd: Fix gluebi NULL pointer dereference caused by ftl notifier If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME. Fixes: 2ba3d76a1e29 ("UBI: make gluebi a separate module") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217992 [1] Link: https://lore.kernel.org/lkml/441107100.23734.1697904580252.JavaMail.zimbra@nod.at/ [2] Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231220024619.2138625-1-wangzhaolong1@huawei.com
2023-12-20 10:46:19 +08:00
mtd: Fix gluebi NULL pointer dereference caused by ftl notifier If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME. Fixes: 2ba3d76a1e29 ("UBI: make gluebi a separate module") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217992 [1] Link: https://lore.kernel.org/lkml/441107100.23734.1697904580252.JavaMail.zimbra@nod.at/ [2] Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231220024619.2138625-1-wangzhaolong1@huawei.com
2023-12-20 10:46:19 +08:00