linux/drivers/pci/Kconfig

343 lines
9.7 KiB

PCI/IDE: Enumerate Selective Stream IDE capabilities Link encryption is a new PCIe feature enumerated by "PCIe r7.0 section 7.9.26 IDE Extended Capability". It is both a standalone port + endpoint capability, and a building block for the security protocol defined by "PCIe r7.0 section 11 TEE Device Interface Security Protocol (TDISP)". That protocol coordinates device security setup between a platform TSM (TEE Security Manager) and a device DSM (Device Security Manager). While the platform TSM can allocate resources like Stream ID and manage keys, it still requires system software to manage the IDE capability register block. Add register definitions and basic enumeration in preparation for Selective IDE Stream establishment. A follow on change selects the new CONFIG_PCI_IDE symbol. Note that while the IDE specification defines both a point-to-point "Link Stream" and a Root Port to endpoint "Selective Stream", only "Selective Stream" is considered for Linux as that is the predominant mode expected by Trusted Execution Environment Security Managers (TSMs), and it is the security model that limits the number of PCI components within the TCB in a PCIe topology with switches. Co-developed-by: Alexey Kardashevskiy <aik@amd.com> Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com> Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alexey Kardashevskiy <aik@amd.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Link: https://patch.msgid.link/20251031212902.2256310-3-dan.j.williams@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2025-10-31 14:28:54 -07:00
PCI/TSM: Establish Secure Sessions and Link Encryption The PCIe 7.0 specification, section 11, defines the Trusted Execution Environment (TEE) Device Interface Security Protocol (TDISP). This protocol definition builds upon Component Measurement and Authentication (CMA), and link Integrity and Data Encryption (IDE). It adds support for assigning devices (PCI physical or virtual function) to a confidential VM such that the assigned device is enabled to access guest private memory protected by technologies like Intel TDX, AMD SEV-SNP, RISCV COVE, or ARM CCA. The "TSM" (TEE Security Manager) is a concept in the TDISP specification of an agent that mediates between a "DSM" (Device Security Manager) and system software in both a VMM and a confidential VM. A VMM uses TSM ABIs to setup link security and assign devices. A confidential VM uses TSM ABIs to transition an assigned device into the TDISP "RUN" state and validate its configuration. From a Linux perspective the TSM abstracts many of the details of TDISP, IDE, and CMA. Some of those details leak through at times, but for the most part TDISP is an internal implementation detail of the TSM. CONFIG_PCI_TSM adds an "authenticated" attribute and "tsm/" subdirectory to pci-sysfs. Consider that the TSM driver may itself be a PCI driver. Userspace can watch for the arrival of a "TSM" device, /sys/class/tsm/tsm0/uevent KOBJ_CHANGE, to know when the PCI core has initialized TSM services. The operations that can be executed against a PCI device are split into two mutually exclusive operation sets, "Link" and "Security" (struct pci_tsm_{link,security}_ops). The "Link" operations manage physical link security properties and communication with the device's Device Security Manager firmware. These are the host side operations in TDISP. The "Security" operations coordinate the security state of the assigned virtual device (TDI). These are the guest side operations in TDISP. Only "link" (Secure Session and physical Link Encryption) operations are defined at this stage. There are placeholders for the device security (Trusted Computing Base entry / exit) operations. The locking allows for multiple devices to be executing commands simultaneously, one outstanding command per-device and an rwsem synchronizes the implementation relative to TSM registration/unregistration events. Thanks to Wu Hao for his work on an early draft of this support. Cc: Lukas Wunner <lukas@wunner.de> Cc: Samuel Ortiz <sameo@rivosinc.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Alexey Kardashevskiy <aik@amd.com> Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com> Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com> Link: https://patch.msgid.link/20251031212902.2256310-5-dan.j.williams@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2025-10-31 14:28:56 -07:00
PCI: Introduce PCI bridge emulated config space common logic Some PCI host controllers do not expose a configuration space for the root port PCI bridge. Due to this, the Marvell Armada 370/38x/XP PCI controller driver (pci-mvebu) emulates a root port PCI bridge configuration space, and uses that to (among other things) dynamically create the memory windows that correspond to the PCI MEM and I/O regions. Since we now need to add a very similar logic for the Marvell Armada 37xx PCI controller driver (pci-aardvark), instead of duplicating the code, we create in this commit a common logic called pci-bridge-emul. The idea of this logic is to emulate a root port PCI bridge configuration space by providing configuration space read/write operations, and faking behind the scenes the configuration space of a PCI bridge. A PCI host controller driver simply has to call pci_bridge_emul_conf_read() and pci_bridge_emul_conf_write() to read/write the configuration space of the bridge. By default, the PCI bridge configuration space is simply emulated by a chunk of memory, but the PCI host controller can override the behavior of the read and write operations on a per-register basis to do additional actions if needed. We take care of complying with the behavior of the PCI configuration space registers in terms of bits that are read-write, read-only, reserved and write-1-to-clear. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-10-18 17:37:16 +02:00
PCI/NPEM: Add Native PCIe Enclosure Management support Native PCIe Enclosure Management (NPEM, PCIe r6.1 sec 6.28) allows managing LEDs in storage enclosures. NPEM is indication oriented and it does not give direct access to LEDs. Although each indication *could* represent an individual LED, multiple indications could also be represented as a single, multi-color LED or a single LED blinking in a specific interval. The specification leaves that open. Each enabled indication (capability register bit on) is represented as a ledclass_dev which can be controlled through sysfs. For every ledclass device only 2 brightness states are allowed: LED_ON (1) or LED_OFF (0). This corresponds to the NPEM control register (Indication bit on/off). Ledclass devices appear in sysfs as child devices (subdirectory) of PCI device which has an NPEM Extended Capability and indication is enabled in NPEM capability register. For example, these are LEDs created for pcieport "10000:02:05.0" on my setup: leds/ ├── 10000:02:05.0:enclosure:fail ├── 10000:02:05.0:enclosure:locate ├── 10000:02:05.0:enclosure:ok └── 10000:02:05.0:enclosure:rebuild They can be also found in "/sys/class/leds" directory. The parent PCIe device domain/bus/device/function address is used to guarantee uniqueness across leds subsystem. To enable/disable a "fail" indication, the "brightness" file can be edited: echo 1 > ./leds/10000:02:05.0:enclosure:fail/brightness echo 0 > ./leds/10000:02:05.0:enclosure:fail/brightness PCIe r6.1, sec 7.9.19.2 defines the possible indications. Multiple indications for same parent PCIe device can conflict and hardware may update them when processing new request. To avoid issues, driver refresh all indications by reading back control register. This driver expects to be the exclusive NPEM extended capability manager. It waits up to 1 second after imposing new request, it doesn't verify if controller is busy before write, and it assumes the mutex lock gives protection from concurrent updates. If _DSM LED management is available, we assume the platform may be using NPEM for its own purposes (see PCI Firmware Spec r3.3 sec 4.7), so the driver does not use NPEM. A future patch will add _DSM support; an info message notes whether NPEM or _DSM is being used. NPEM is a PCIe extended capability so it should be registered in pcie_init_capabilities() but it is not possible due to LED dependency. The parent pci_device must be added earlier for led_classdev_register() to be successful. NPEM does not require configuration on kernel side, so it is safe to register LED devices later. Link: https://lore.kernel.org/r/20240904104848.23480-3-mariusz.tkaczyk@linux.intel.com Suggested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-09-04 12:48:47 +02:00
PCI/P2PDMA: Support peer-to-peer memory Some PCI devices may have memory mapped in a BAR space that's intended for use in peer-to-peer transactions. To enable such transactions the memory must be registered with ZONE_DEVICE pages so it can be used by DMA interfaces in existing drivers. Add an interface for other subsystems to find and allocate chunks of P2P memory as necessary to facilitate transfers between two PCI peers: struct pci_dev *pci_p2pmem_find[_many](); int pci_p2pdma_distance[_many](); void *pci_alloc_p2pmem(); The new interface requires a driver to collect a list of client devices involved in the transaction then call pci_p2pmem_find() to obtain any suitable P2P memory. Alternatively, if the caller knows a device which provides P2P memory, they can use pci_p2pdma_distance() to determine if it is usable. With a suitable p2pmem device, memory can then be allocated with pci_alloc_p2pmem() for use in DMA transactions. Depending on hardware, using peer-to-peer memory may reduce the bandwidth of the transfer but can significantly reduce pressure on system memory. This may be desirable in many cases: for example a system could be designed with a small CPU connected to a PCIe switch by a small number of lanes which would maximize the number of lanes available to connect to NVMe devices. The code is designed to only utilize the p2pmem device if all the devices involved in a transfer are behind the same PCI bridge. This is because we have no way of knowing whether peer-to-peer routing between PCIe Root Ports is supported (PCIe r4.0, sec 1.3.1). Additionally, the benefits of P2P transfers that go through the RC is limited to only reducing DRAM usage and, in some cases, coding convenience. The PCI-SIG may be exploring adding a new capability bit to advertise whether this is possible for future hardware. This commit includes significant rework and feedback from Christoph Hellwig. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: fold in fix from Keith Busch <keith.busch@intel.com>: https://lore.kernel.org/linux-pci/20181012155920.15418-1-keith.busch@intel.com, to address comment from Dan Carpenter <dan.carpenter@oracle.com>, fold in https://lore.kernel.org/linux-pci/20181017160510.17926-1-logang@deltatee.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-04 15:27:35 -06:00
PCI/P2PDMA: Support peer-to-peer memory Some PCI devices may have memory mapped in a BAR space that's intended for use in peer-to-peer transactions. To enable such transactions the memory must be registered with ZONE_DEVICE pages so it can be used by DMA interfaces in existing drivers. Add an interface for other subsystems to find and allocate chunks of P2P memory as necessary to facilitate transfers between two PCI peers: struct pci_dev *pci_p2pmem_find[_many](); int pci_p2pdma_distance[_many](); void *pci_alloc_p2pmem(); The new interface requires a driver to collect a list of client devices involved in the transaction then call pci_p2pmem_find() to obtain any suitable P2P memory. Alternatively, if the caller knows a device which provides P2P memory, they can use pci_p2pdma_distance() to determine if it is usable. With a suitable p2pmem device, memory can then be allocated with pci_alloc_p2pmem() for use in DMA transactions. Depending on hardware, using peer-to-peer memory may reduce the bandwidth of the transfer but can significantly reduce pressure on system memory. This may be desirable in many cases: for example a system could be designed with a small CPU connected to a PCIe switch by a small number of lanes which would maximize the number of lanes available to connect to NVMe devices. The code is designed to only utilize the p2pmem device if all the devices involved in a transfer are behind the same PCI bridge. This is because we have no way of knowing whether peer-to-peer routing between PCIe Root Ports is supported (PCIe r4.0, sec 1.3.1). Additionally, the benefits of P2P transfers that go through the RC is limited to only reducing DRAM usage and, in some cases, coding convenience. The PCI-SIG may be exploring adding a new capability bit to advertise whether this is possible for future hardware. This commit includes significant rework and feedback from Christoph Hellwig. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: fold in fix from Keith Busch <keith.busch@intel.com>: https://lore.kernel.org/linux-pci/20181012155920.15418-1-keith.busch@intel.com, to address comment from Dan Carpenter <dan.carpenter@oracle.com>, fold in https://lore.kernel.org/linux-pci/20181017160510.17926-1-logang@deltatee.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-04 15:27:35 -06:00
PCI/P2PDMA: Support peer-to-peer memory Some PCI devices may have memory mapped in a BAR space that's intended for use in peer-to-peer transactions. To enable such transactions the memory must be registered with ZONE_DEVICE pages so it can be used by DMA interfaces in existing drivers. Add an interface for other subsystems to find and allocate chunks of P2P memory as necessary to facilitate transfers between two PCI peers: struct pci_dev *pci_p2pmem_find[_many](); int pci_p2pdma_distance[_many](); void *pci_alloc_p2pmem(); The new interface requires a driver to collect a list of client devices involved in the transaction then call pci_p2pmem_find() to obtain any suitable P2P memory. Alternatively, if the caller knows a device which provides P2P memory, they can use pci_p2pdma_distance() to determine if it is usable. With a suitable p2pmem device, memory can then be allocated with pci_alloc_p2pmem() for use in DMA transactions. Depending on hardware, using peer-to-peer memory may reduce the bandwidth of the transfer but can significantly reduce pressure on system memory. This may be desirable in many cases: for example a system could be designed with a small CPU connected to a PCIe switch by a small number of lanes which would maximize the number of lanes available to connect to NVMe devices. The code is designed to only utilize the p2pmem device if all the devices involved in a transfer are behind the same PCI bridge. This is because we have no way of knowing whether peer-to-peer routing between PCIe Root Ports is supported (PCIe r4.0, sec 1.3.1). Additionally, the benefits of P2P transfers that go through the RC is limited to only reducing DRAM usage and, in some cases, coding convenience. The PCI-SIG may be exploring adding a new capability bit to advertise whether this is possible for future hardware. This commit includes significant rework and feedback from Christoph Hellwig. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: fold in fix from Keith Busch <keith.busch@intel.com>: https://lore.kernel.org/linux-pci/20181012155920.15418-1-keith.busch@intel.com, to address comment from Dan Carpenter <dan.carpenter@oracle.com>, fold in https://lore.kernel.org/linux-pci/20181017160510.17926-1-logang@deltatee.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-04 15:27:35 -06:00
PCI/P2PDMA: Support peer-to-peer memory Some PCI devices may have memory mapped in a BAR space that's intended for use in peer-to-peer transactions. To enable such transactions the memory must be registered with ZONE_DEVICE pages so it can be used by DMA interfaces in existing drivers. Add an interface for other subsystems to find and allocate chunks of P2P memory as necessary to facilitate transfers between two PCI peers: struct pci_dev *pci_p2pmem_find[_many](); int pci_p2pdma_distance[_many](); void *pci_alloc_p2pmem(); The new interface requires a driver to collect a list of client devices involved in the transaction then call pci_p2pmem_find() to obtain any suitable P2P memory. Alternatively, if the caller knows a device which provides P2P memory, they can use pci_p2pdma_distance() to determine if it is usable. With a suitable p2pmem device, memory can then be allocated with pci_alloc_p2pmem() for use in DMA transactions. Depending on hardware, using peer-to-peer memory may reduce the bandwidth of the transfer but can significantly reduce pressure on system memory. This may be desirable in many cases: for example a system could be designed with a small CPU connected to a PCIe switch by a small number of lanes which would maximize the number of lanes available to connect to NVMe devices. The code is designed to only utilize the p2pmem device if all the devices involved in a transfer are behind the same PCI bridge. This is because we have no way of knowing whether peer-to-peer routing between PCIe Root Ports is supported (PCIe r4.0, sec 1.3.1). Additionally, the benefits of P2P transfers that go through the RC is limited to only reducing DRAM usage and, in some cases, coding convenience. The PCI-SIG may be exploring adding a new capability bit to advertise whether this is possible for future hardware. This commit includes significant rework and feedback from Christoph Hellwig. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: fold in fix from Keith Busch <keith.busch@intel.com>: https://lore.kernel.org/linux-pci/20181012155920.15418-1-keith.busch@intel.com, to address comment from Dan Carpenter <dan.carpenter@oracle.com>, fold in https://lore.kernel.org/linux-pci/20181017160510.17926-1-logang@deltatee.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-04 15:27:35 -06:00
PCI/P2PDMA: Support peer-to-peer memory Some PCI devices may have memory mapped in a BAR space that's intended for use in peer-to-peer transactions. To enable such transactions the memory must be registered with ZONE_DEVICE pages so it can be used by DMA interfaces in existing drivers. Add an interface for other subsystems to find and allocate chunks of P2P memory as necessary to facilitate transfers between two PCI peers: struct pci_dev *pci_p2pmem_find[_many](); int pci_p2pdma_distance[_many](); void *pci_alloc_p2pmem(); The new interface requires a driver to collect a list of client devices involved in the transaction then call pci_p2pmem_find() to obtain any suitable P2P memory. Alternatively, if the caller knows a device which provides P2P memory, they can use pci_p2pdma_distance() to determine if it is usable. With a suitable p2pmem device, memory can then be allocated with pci_alloc_p2pmem() for use in DMA transactions. Depending on hardware, using peer-to-peer memory may reduce the bandwidth of the transfer but can significantly reduce pressure on system memory. This may be desirable in many cases: for example a system could be designed with a small CPU connected to a PCIe switch by a small number of lanes which would maximize the number of lanes available to connect to NVMe devices. The code is designed to only utilize the p2pmem device if all the devices involved in a transfer are behind the same PCI bridge. This is because we have no way of knowing whether peer-to-peer routing between PCIe Root Ports is supported (PCIe r4.0, sec 1.3.1). Additionally, the benefits of P2P transfers that go through the RC is limited to only reducing DRAM usage and, in some cases, coding convenience. The PCI-SIG may be exploring adding a new capability bit to advertise whether this is possible for future hardware. This commit includes significant rework and feedback from Christoph Hellwig. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: fold in fix from Keith Busch <keith.busch@intel.com>: https://lore.kernel.org/linux-pci/20181012155920.15418-1-keith.busch@intel.com, to address comment from Dan Carpenter <dan.carpenter@oracle.com>, fold in https://lore.kernel.org/linux-pci/20181017160510.17926-1-logang@deltatee.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-04 15:27:35 -06:00
2023-08-15 10:19:57 -07:00
2023-08-15 10:19:57 -07:00
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-06 18:30:54 -06:00