linux/include/net/mana/mana.h

1030 lines
24 KiB

net: mana: Add support for net_shaper_ops Introduce support for net_shaper_ops in the MANA driver, enabling configuration of rate limiting on the MANA NIC. To apply rate limiting, the driver issues a HWC command via mana_set_bw_clamp() and updates the corresponding shaper object in the net_shaper cache. If an error occurs during this process, the driver restores the previous speed by querying the current link configuration using mana_query_link_cfg(). The minimum supported bandwidth is 100 Mbps, and only values that are exact multiples of 100 Mbps are allowed. Any other values are rejected. To remove a shaper, the driver resets the bandwidth to the maximum supported by the SKU using mana_set_bw_clamp() and clears the associated cache entry. If an error occurs during this process, the shaper details are retained. On the hardware that does not support these APIs, the net-shaper calls to set speed would fail. Set the speed: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do set --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }, "bw-max": 200000000 }' Get the shaper details: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do get --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }}' > {'bw-max': 200000000, > 'handle': {'scope': 'netdev'}, > 'ifindex': $IFINDEX, > 'metric': 'bps'} Delete the shaper object: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do delete --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev","id":'$ID' }}' Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-17 00:17:34 -07:00
net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency. This patch enhances RX buffer handling in the mana driver by allocating pages from a page pool and slicing them into MTU-sized fragments, rather than dedicating a full page per packet. This approach is especially beneficial on systems with large base page sizes like 64KB. Key improvements: - Proper integration of page pool for RX buffer allocations. - MTU-sized buffer slicing to improve memory utilization. - Reduce overall per Rx queue memory footprint. - Automatic fallback to full-page buffers when: * Jumbo frames are enabled (MTU > PAGE_SIZE / 2). * The XDP path is active, to avoid complexities with fragment reuse. Testing on VMs with 64KB pages shows around 200% throughput improvement. Memory efficiency is significantly improved due to reduced wastage in page allocations. Example: We are now able to fit 35 rx buffers in a single 64kb page for MTU size of 1500, instead of 1 rx buffer per page previously. Tested: - iperf3, iperf2, and nttcp benchmarks. - Jumbo frames with MTU 9000. - Native XDP programs (XDP_PASS, XDP_DROP, XDP_TX, XDP_REDIRECT) for testing the XDP path in driver. - Memory leak detection (kmemleak). - Driver load/unload, reboot, and stress scenarios. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/20250814140410.GA22089@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-14 07:04:10 -07:00
net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency. This patch enhances RX buffer handling in the mana driver by allocating pages from a page pool and slicing them into MTU-sized fragments, rather than dedicating a full page per packet. This approach is especially beneficial on systems with large base page sizes like 64KB. Key improvements: - Proper integration of page pool for RX buffer allocations. - MTU-sized buffer slicing to improve memory utilization. - Reduce overall per Rx queue memory footprint. - Automatic fallback to full-page buffers when: * Jumbo frames are enabled (MTU > PAGE_SIZE / 2). * The XDP path is active, to avoid complexities with fragment reuse. Testing on VMs with 64KB pages shows around 200% throughput improvement. Memory efficiency is significantly improved due to reduced wastage in page allocations. Example: We are now able to fit 35 rx buffers in a single 64kb page for MTU size of 1500, instead of 1 rx buffer per page previously. Tested: - iperf3, iperf2, and nttcp benchmarks. - Jumbo frames with MTU 9000. - Native XDP programs (XDP_PASS, XDP_DROP, XDP_TX, XDP_REDIRECT) for testing the XDP path in driver. - Memory leak detection (kmemleak). - Driver load/unload, reboot, and stress scenarios. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/20250814140410.GA22089@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-14 07:04:10 -07:00
net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency. This patch enhances RX buffer handling in the mana driver by allocating pages from a page pool and slicing them into MTU-sized fragments, rather than dedicating a full page per packet. This approach is especially beneficial on systems with large base page sizes like 64KB. Key improvements: - Proper integration of page pool for RX buffer allocations. - MTU-sized buffer slicing to improve memory utilization. - Reduce overall per Rx queue memory footprint. - Automatic fallback to full-page buffers when: * Jumbo frames are enabled (MTU > PAGE_SIZE / 2). * The XDP path is active, to avoid complexities with fragment reuse. Testing on VMs with 64KB pages shows around 200% throughput improvement. Memory efficiency is significantly improved due to reduced wastage in page allocations. Example: We are now able to fit 35 rx buffers in a single 64kb page for MTU size of 1500, instead of 1 rx buffer per page previously. Tested: - iperf3, iperf2, and nttcp benchmarks. - Jumbo frames with MTU 9000. - Native XDP programs (XDP_PASS, XDP_DROP, XDP_TX, XDP_REDIRECT) for testing the XDP path in driver. - Memory leak detection (kmemleak). - Driver load/unload, reboot, and stress scenarios. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/20250814140410.GA22089@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-14 07:04:10 -07:00
net: mana: Add support for net_shaper_ops Introduce support for net_shaper_ops in the MANA driver, enabling configuration of rate limiting on the MANA NIC. To apply rate limiting, the driver issues a HWC command via mana_set_bw_clamp() and updates the corresponding shaper object in the net_shaper cache. If an error occurs during this process, the driver restores the previous speed by querying the current link configuration using mana_query_link_cfg(). The minimum supported bandwidth is 100 Mbps, and only values that are exact multiples of 100 Mbps are allowed. Any other values are rejected. To remove a shaper, the driver resets the bandwidth to the maximum supported by the SKU using mana_set_bw_clamp() and clears the associated cache entry. If an error occurs during this process, the shaper details are retained. On the hardware that does not support these APIs, the net-shaper calls to set speed would fail. Set the speed: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do set --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }, "bw-max": 200000000 }' Get the shaper details: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do get --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }}' > {'bw-max': 200000000, > 'handle': {'scope': 'netdev'}, > 'ifindex': $IFINDEX, > 'metric': 'bps'} Delete the shaper object: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do delete --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev","id":'$ID' }}' Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-17 00:17:34 -07:00
net: mana: Add support for net_shaper_ops Introduce support for net_shaper_ops in the MANA driver, enabling configuration of rate limiting on the MANA NIC. To apply rate limiting, the driver issues a HWC command via mana_set_bw_clamp() and updates the corresponding shaper object in the net_shaper cache. If an error occurs during this process, the driver restores the previous speed by querying the current link configuration using mana_query_link_cfg(). The minimum supported bandwidth is 100 Mbps, and only values that are exact multiples of 100 Mbps are allowed. Any other values are rejected. To remove a shaper, the driver resets the bandwidth to the maximum supported by the SKU using mana_set_bw_clamp() and clears the associated cache entry. If an error occurs during this process, the shaper details are retained. On the hardware that does not support these APIs, the net-shaper calls to set speed would fail. Set the speed: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do set --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }, "bw-max": 200000000 }' Get the shaper details: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do get --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }}' > {'bw-max': 200000000, > 'handle': {'scope': 'netdev'}, > 'ifindex': $IFINDEX, > 'metric': 'bps'} Delete the shaper object: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do delete --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev","id":'$ID' }}' Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-17 00:17:34 -07:00
net: mana: Add speed support in mana_get_link_ksettings Allow mana ethtool get_link_ksettings operation to report the maximum speed supported by the SKU in mbps. The driver retrieves this information by issuing a HWC command to the hardware via mana_query_link_cfg(), which retrieves the SKU's maximum supported speed. These APIs when invoked on hardware that are older/do not support these APIs, the speed would be reported as UNKNOWN. Before: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: Unknown! Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes After: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 16000Mb/s Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-17 00:17:35 -07:00
net: mana: Add support for net_shaper_ops Introduce support for net_shaper_ops in the MANA driver, enabling configuration of rate limiting on the MANA NIC. To apply rate limiting, the driver issues a HWC command via mana_set_bw_clamp() and updates the corresponding shaper object in the net_shaper cache. If an error occurs during this process, the driver restores the previous speed by querying the current link configuration using mana_query_link_cfg(). The minimum supported bandwidth is 100 Mbps, and only values that are exact multiples of 100 Mbps are allowed. Any other values are rejected. To remove a shaper, the driver resets the bandwidth to the maximum supported by the SKU using mana_set_bw_clamp() and clears the associated cache entry. If an error occurs during this process, the shaper details are retained. On the hardware that does not support these APIs, the net-shaper calls to set speed would fail. Set the speed: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do set --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }, "bw-max": 200000000 }' Get the shaper details: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do get --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }}' > {'bw-max': 200000000, > 'handle': {'scope': 'netdev'}, > 'ifindex': $IFINDEX, > 'metric': 'bps'} Delete the shaper object: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do delete --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev","id":'$ID' }}' Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-17 00:17:34 -07:00
net: mana: Add support for net_shaper_ops Introduce support for net_shaper_ops in the MANA driver, enabling configuration of rate limiting on the MANA NIC. To apply rate limiting, the driver issues a HWC command via mana_set_bw_clamp() and updates the corresponding shaper object in the net_shaper cache. If an error occurs during this process, the driver restores the previous speed by querying the current link configuration using mana_query_link_cfg(). The minimum supported bandwidth is 100 Mbps, and only values that are exact multiples of 100 Mbps are allowed. Any other values are rejected. To remove a shaper, the driver resets the bandwidth to the maximum supported by the SKU using mana_set_bw_clamp() and clears the associated cache entry. If an error occurs during this process, the shaper details are retained. On the hardware that does not support these APIs, the net-shaper calls to set speed would fail. Set the speed: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do set --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }, "bw-max": 200000000 }' Get the shaper details: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do get --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }}' > {'bw-max': 200000000, > 'handle': {'scope': 'netdev'}, > 'ifindex': $IFINDEX, > 'metric': 'bps'} Delete the shaper object: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do delete --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev","id":'$ID' }}' Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-17 00:17:34 -07:00
net: mana: Add support for net_shaper_ops Introduce support for net_shaper_ops in the MANA driver, enabling configuration of rate limiting on the MANA NIC. To apply rate limiting, the driver issues a HWC command via mana_set_bw_clamp() and updates the corresponding shaper object in the net_shaper cache. If an error occurs during this process, the driver restores the previous speed by querying the current link configuration using mana_query_link_cfg(). The minimum supported bandwidth is 100 Mbps, and only values that are exact multiples of 100 Mbps are allowed. Any other values are rejected. To remove a shaper, the driver resets the bandwidth to the maximum supported by the SKU using mana_set_bw_clamp() and clears the associated cache entry. If an error occurs during this process, the shaper details are retained. On the hardware that does not support these APIs, the net-shaper calls to set speed would fail. Set the speed: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do set --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }, "bw-max": 200000000 }' Get the shaper details: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do get --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }}' > {'bw-max': 200000000, > 'handle': {'scope': 'netdev'}, > 'ifindex': $IFINDEX, > 'metric': 'bps'} Delete the shaper object: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do delete --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev","id":'$ID' }}' Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-17 00:17:34 -07:00