linux/fs/binfmt_elf.c

2067 lines
53 KiB

x86: PIE executable randomization, checkpatch fixes #39: FILE: arch/ia64/ia32/binfmt_elf32.c:229: +elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type, unsigned long unused) WARNING: no space between function name and open parenthesis '(' #39: FILE: arch/ia64/ia32/binfmt_elf32.c:229: +elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type, unsigned long unused) WARNING: line over 80 characters #67: FILE: arch/x86/kernel/sys_x86_64.c:80: + new_begin = randomize_range(*begin, *begin + 0x02000000, 0); ERROR: use tabs not spaces #110: FILE: arch/x86/kernel/sys_x86_64.c:185: + ^I mm->cached_hole_size = 0;$ ERROR: use tabs not spaces #111: FILE: arch/x86/kernel/sys_x86_64.c:186: + ^I^Imm->free_area_cache = mm->mmap_base;$ ERROR: use tabs not spaces #112: FILE: arch/x86/kernel/sys_x86_64.c:187: + ^I}$ ERROR: use tabs not spaces #141: FILE: arch/x86/kernel/sys_x86_64.c:216: + ^I^I/* remember the largest hole we saw so far */$ ERROR: use tabs not spaces #142: FILE: arch/x86/kernel/sys_x86_64.c:217: + ^I^Iif (addr + mm->cached_hole_size < vma->vm_start)$ ERROR: use tabs not spaces #143: FILE: arch/x86/kernel/sys_x86_64.c:218: + ^I^I mm->cached_hole_size = vma->vm_start - addr;$ ERROR: use tabs not spaces #157: FILE: arch/x86/kernel/sys_x86_64.c:232: + ^Imm->free_area_cache = TASK_UNMAPPED_BASE;$ ERROR: need a space before the open parenthesis '(' #291: FILE: arch/x86/mm/mmap_64.c:101: + } else if(mmap_is_legacy()) { WARNING: braces {} are not necessary for single statement blocks #302: FILE: arch/x86/mm/mmap_64.c:112: + if (current->flags & PF_RANDOMIZE) { + mm->mmap_base += ((long)rnd) << PAGE_SHIFT; + } WARNING: line over 80 characters #314: FILE: fs/binfmt_elf.c:48: +static unsigned long elf_map (struct file *, unsigned long, struct elf_phdr *, int, int, unsigned long); WARNING: no space between function name and open parenthesis '(' #314: FILE: fs/binfmt_elf.c:48: +static unsigned long elf_map (struct file *, unsigned long, struct elf_phdr *, int, int, unsigned long); WARNING: line over 80 characters #429: FILE: fs/binfmt_elf.c:438: + eppnt, elf_prot, elf_type, total_size); ERROR: need space after that ',' (ctx:VxV) #480: FILE: fs/binfmt_elf.c:939: + elf_prot, elf_flags,0); ^ total: 9 errors, 7 warnings, 461 lines checked Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:07 +01:00
core_pattern: ignore RLIMIT_CORE if core_pattern is a pipe For some time /proc/sys/kernel/core_pattern has been able to set its output destination as a pipe, allowing a user space helper to receive and intellegently process a core. This infrastructure however has some shortcommings which can be enhanced. Specifically: 1) The coredump code in the kernel should ignore RLIMIT_CORE limitation when core_pattern is a pipe, since file system resources are not being consumed in this case, unless the user application wishes to save the core, at which point the app is restricted by usual file system limits and restrictions. 2) The core_pattern code should be able to parse and pass options to the user space helper as an argv array. The real core limit of the uid of the crashing proces should also be passable to the user space helper (since it is overridden to zero when called). 3) Some miscellaneous bugs need to be cleaned up (specifically the recognition of a recursive core dump, should the user mode helper itself crash. Also, the core dump code in the kernel should not wait for the user mode helper to exit, since the same context is responsible for writing to the pipe, and a read of the pipe by the user mode helper will result in a deadlock. This patch: Remove the check of RLIMIT_CORE if core_pattern is a pipe. In the event that core_pattern is a pipe, the entire core will be fed to the user mode helper. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: <martin.pitt@ubuntu.com> Cc: <wwoods@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:26:34 -07:00
x86: PIE executable randomization, checkpatch fixes #39: FILE: arch/ia64/ia32/binfmt_elf32.c:229: +elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type, unsigned long unused) WARNING: no space between function name and open parenthesis '(' #39: FILE: arch/ia64/ia32/binfmt_elf32.c:229: +elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type, unsigned long unused) WARNING: line over 80 characters #67: FILE: arch/x86/kernel/sys_x86_64.c:80: + new_begin = randomize_range(*begin, *begin + 0x02000000, 0); ERROR: use tabs not spaces #110: FILE: arch/x86/kernel/sys_x86_64.c:185: + ^I mm->cached_hole_size = 0;$ ERROR: use tabs not spaces #111: FILE: arch/x86/kernel/sys_x86_64.c:186: + ^I^Imm->free_area_cache = mm->mmap_base;$ ERROR: use tabs not spaces #112: FILE: arch/x86/kernel/sys_x86_64.c:187: + ^I}$ ERROR: use tabs not spaces #141: FILE: arch/x86/kernel/sys_x86_64.c:216: + ^I^I/* remember the largest hole we saw so far */$ ERROR: use tabs not spaces #142: FILE: arch/x86/kernel/sys_x86_64.c:217: + ^I^Iif (addr + mm->cached_hole_size < vma->vm_start)$ ERROR: use tabs not spaces #143: FILE: arch/x86/kernel/sys_x86_64.c:218: + ^I^I mm->cached_hole_size = vma->vm_start - addr;$ ERROR: use tabs not spaces #157: FILE: arch/x86/kernel/sys_x86_64.c:232: + ^Imm->free_area_cache = TASK_UNMAPPED_BASE;$ ERROR: need a space before the open parenthesis '(' #291: FILE: arch/x86/mm/mmap_64.c:101: + } else if(mmap_is_legacy()) { WARNING: braces {} are not necessary for single statement blocks #302: FILE: arch/x86/mm/mmap_64.c:112: + if (current->flags & PF_RANDOMIZE) { + mm->mmap_base += ((long)rnd) << PAGE_SHIFT; + } WARNING: line over 80 characters #314: FILE: fs/binfmt_elf.c:48: +static unsigned long elf_map (struct file *, unsigned long, struct elf_phdr *, int, int, unsigned long); WARNING: no space between function name and open parenthesis '(' #314: FILE: fs/binfmt_elf.c:48: +static unsigned long elf_map (struct file *, unsigned long, struct elf_phdr *, int, int, unsigned long); WARNING: line over 80 characters #429: FILE: fs/binfmt_elf.c:438: + eppnt, elf_prot, elf_type, total_size); ERROR: need space after that ',' (ctx:VxV) #480: FILE: fs/binfmt_elf.c:939: + elf_prot, elf_flags,0); ^ total: 9 errors, 7 warnings, 461 lines checked Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:07 +01:00
[PATCH] binfmt_elf: fix checks for bad address Fix check for bad address; use macro instead of open-coding two checks. Taken from RHEL4 kernel update. From: Ernie Petrides <petrides@redhat.com> For background, the BAD_ADDR() macro should return TRUE if the address is TASK_SIZE, because that's the lowest address that is *not* valid for user-space mappings. The macro was correct in binfmt_aout.c but was wrong for the "equal to" case in binfmt_elf.c. There were two in-line validations of user-space addresses in binfmt_elf.c, which have been appropriately converted to use the corrected BAD_ADDR() macro in the patch you posted yesterday. Note that the size checks against TASK_SIZE are okay as coded. The additional changes that I propose are below. These are in the error paths for bad ELF entry addresses once load_elf_binary() has already committed to exec'ing the new image (following the tearing down of the task's original address space). The 1st hunk deals with the interp-side of the outer "if". There were two problems here. The printk() should be removed because this path can be triggered at will by a bogus interpreter image created and used by a malicious user. Further, the error code should not be ENOEXEC, because that causes the loop in search_binary_handler() to continue trying other exec handlers (twice, in fact). But it's too late for this to work correctly, because the user address space has already been torn down, and an exec() failure cannot be returned to the user code because the code no longer exists. The only recovery is to force a SIGSEGV, but it's best to terminate the search loop immediately. I somewhat arbitrarily chose EINVAL as a fallback error code, but any error returned by load_elf_interp() will override that (but this value will never be seen by user-space). The 2nd hunk deals with the non-interp-side of the outer "if". There were two problems here as well. The SIGSEGV needs to be forced, because a prior sigaction() syscall might have set the associated disposition to SIG_IGN. And the ENOEXEC should be changed to EINVAL as described above. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Ernie Petrides <petrides@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:14 -07:00
[PATCH] Avoiding mmap fragmentation Ingo recently introduced a great speedup for allocating new mmaps using the free_area_cache pointer which boosts the specweb SSL benchmark by 4-5% and causes huge performance increases in thread creation. The downside of this patch is that it does lead to fragmentation in the mmap-ed areas (visible via /proc/self/maps), such that some applications that work fine under 2.4 kernels quickly run out of memory on any 2.6 kernel. The problem is twofold: 1) the free_area_cache is used to continue a search for memory where the last search ended. Before the change new areas were always searched from the base address on. So now new small areas are cluttering holes of all sizes throughout the whole mmap-able region whereas before small holes tended to close holes near the base leaving holes far from the base large and available for larger requests. 2) the free_area_cache also is set to the location of the last munmap-ed area so in scenarios where we allocate e.g. five regions of 1K each, then free regions 4 2 3 in this order the next request for 1K will be placed in the position of the old region 3, whereas before we appended it to the still active region 1, placing it at the location of the old region 2. Before we had 1 free region of 2K, now we only get two free regions of 1K -> fragmentation. The patch addresses thes issues by introducing yet another cache descriptor cached_hole_size that contains the largest known hole size below the current free_area_cache. If a new request comes in the size is compared against the cached_hole_size and if the request can be filled with a hole below free_area_cache the search is started from the base instead. The results look promising: Whereas 2.6.12-rc4 fragments quickly and my (earlier posted) leakme.c test program terminates after 50000+ iterations with 96 distinct and fragmented maps in /proc/self/maps it performs nicely (as expected) with thread creation, Ingo's test_str02 with 20000 threads requires 0.7s system time. Taking out Ingo's patch (un-patch available per request) by basically deleting all mentions of free_area_cache from the kernel and starting the search for new memory always at the respective bases we observe: leakme terminates successfully with 11 distinctive hardly fragmented areas in /proc/self/maps but thread creating is gringdingly slow: 30+s(!) system time for Ingo's test_str02 with 20000 threads. Now - drumroll ;-) the appended patch works fine with leakme: it ends with only 7 distinct areas in /proc/self/maps and also thread creation seems sufficiently fast with 0.71s for 20000 threads. Signed-off-by: Wolfgang Wander <wwc@rentec.com> Credit-to: "Richard Purdie" <rpurdie@rpsys.net> Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> (partly) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:14:49 -07:00
x86: PIE executable randomization, checkpatch fixes #39: FILE: arch/ia64/ia32/binfmt_elf32.c:229: +elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type, unsigned long unused) WARNING: no space between function name and open parenthesis '(' #39: FILE: arch/ia64/ia32/binfmt_elf32.c:229: +elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type, unsigned long unused) WARNING: line over 80 characters #67: FILE: arch/x86/kernel/sys_x86_64.c:80: + new_begin = randomize_range(*begin, *begin + 0x02000000, 0); ERROR: use tabs not spaces #110: FILE: arch/x86/kernel/sys_x86_64.c:185: + ^I mm->cached_hole_size = 0;$ ERROR: use tabs not spaces #111: FILE: arch/x86/kernel/sys_x86_64.c:186: + ^I^Imm->free_area_cache = mm->mmap_base;$ ERROR: use tabs not spaces #112: FILE: arch/x86/kernel/sys_x86_64.c:187: + ^I}$ ERROR: use tabs not spaces #141: FILE: arch/x86/kernel/sys_x86_64.c:216: + ^I^I/* remember the largest hole we saw so far */$ ERROR: use tabs not spaces #142: FILE: arch/x86/kernel/sys_x86_64.c:217: + ^I^Iif (addr + mm->cached_hole_size < vma->vm_start)$ ERROR: use tabs not spaces #143: FILE: arch/x86/kernel/sys_x86_64.c:218: + ^I^I mm->cached_hole_size = vma->vm_start - addr;$ ERROR: use tabs not spaces #157: FILE: arch/x86/kernel/sys_x86_64.c:232: + ^Imm->free_area_cache = TASK_UNMAPPED_BASE;$ ERROR: need a space before the open parenthesis '(' #291: FILE: arch/x86/mm/mmap_64.c:101: + } else if(mmap_is_legacy()) { WARNING: braces {} are not necessary for single statement blocks #302: FILE: arch/x86/mm/mmap_64.c:112: + if (current->flags & PF_RANDOMIZE) { + mm->mmap_base += ((long)rnd) << PAGE_SHIFT; + } WARNING: line over 80 characters #314: FILE: fs/binfmt_elf.c:48: +static unsigned long elf_map (struct file *, unsigned long, struct elf_phdr *, int, int, unsigned long); WARNING: no space between function name and open parenthesis '(' #314: FILE: fs/binfmt_elf.c:48: +static unsigned long elf_map (struct file *, unsigned long, struct elf_phdr *, int, int, unsigned long); WARNING: line over 80 characters #429: FILE: fs/binfmt_elf.c:438: + eppnt, elf_prot, elf_type, total_size); ERROR: need space after that ',' (ctx:VxV) #480: FILE: fs/binfmt_elf.c:939: + elf_prot, elf_flags,0); ^ total: 9 errors, 7 warnings, 461 lines checked Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:07 +01:00
[PATCH] binfmt_elf: fix checks for bad address Fix check for bad address; use macro instead of open-coding two checks. Taken from RHEL4 kernel update. From: Ernie Petrides <petrides@redhat.com> For background, the BAD_ADDR() macro should return TRUE if the address is TASK_SIZE, because that's the lowest address that is *not* valid for user-space mappings. The macro was correct in binfmt_aout.c but was wrong for the "equal to" case in binfmt_elf.c. There were two in-line validations of user-space addresses in binfmt_elf.c, which have been appropriately converted to use the corrected BAD_ADDR() macro in the patch you posted yesterday. Note that the size checks against TASK_SIZE are okay as coded. The additional changes that I propose are below. These are in the error paths for bad ELF entry addresses once load_elf_binary() has already committed to exec'ing the new image (following the tearing down of the task's original address space). The 1st hunk deals with the interp-side of the outer "if". There were two problems here. The printk() should be removed because this path can be triggered at will by a bogus interpreter image created and used by a malicious user. Further, the error code should not be ENOEXEC, because that causes the loop in search_binary_handler() to continue trying other exec handlers (twice, in fact). But it's too late for this to work correctly, because the user address space has already been torn down, and an exec() failure cannot be returned to the user code because the code no longer exists. The only recovery is to force a SIGSEGV, but it's best to terminate the search loop immediately. I somewhat arbitrarily chose EINVAL as a fallback error code, but any error returned by load_elf_interp() will override that (but this value will never be seen by user-space). The 2nd hunk deals with the non-interp-side of the outer "if". There were two problems here as well. The SIGSEGV needs to be forced, because a prior sigaction() syscall might have set the associated disposition to SIG_IGN. And the ENOEXEC should be changed to EINVAL as described above. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Ernie Petrides <petrides@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:14 -07:00
[PATCH] binfmt_elf: fix checks for bad address Fix check for bad address; use macro instead of open-coding two checks. Taken from RHEL4 kernel update. From: Ernie Petrides <petrides@redhat.com> For background, the BAD_ADDR() macro should return TRUE if the address is TASK_SIZE, because that's the lowest address that is *not* valid for user-space mappings. The macro was correct in binfmt_aout.c but was wrong for the "equal to" case in binfmt_elf.c. There were two in-line validations of user-space addresses in binfmt_elf.c, which have been appropriately converted to use the corrected BAD_ADDR() macro in the patch you posted yesterday. Note that the size checks against TASK_SIZE are okay as coded. The additional changes that I propose are below. These are in the error paths for bad ELF entry addresses once load_elf_binary() has already committed to exec'ing the new image (following the tearing down of the task's original address space). The 1st hunk deals with the interp-side of the outer "if". There were two problems here. The printk() should be removed because this path can be triggered at will by a bogus interpreter image created and used by a malicious user. Further, the error code should not be ENOEXEC, because that causes the loop in search_binary_handler() to continue trying other exec handlers (twice, in fact). But it's too late for this to work correctly, because the user address space has already been torn down, and an exec() failure cannot be returned to the user code because the code no longer exists. The only recovery is to force a SIGSEGV, but it's best to terminate the search loop immediately. I somewhat arbitrarily chose EINVAL as a fallback error code, but any error returned by load_elf_interp() will override that (but this value will never be seen by user-space). The 2nd hunk deals with the non-interp-side of the outer "if". There were two problems here as well. The SIGSEGV needs to be forced, because a prior sigaction() syscall might have set the associated disposition to SIG_IGN. And the ENOEXEC should be changed to EINVAL as described above. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Ernie Petrides <petrides@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:14 -07:00
[PATCH] binfmt_elf: fix checks for bad address Fix check for bad address; use macro instead of open-coding two checks. Taken from RHEL4 kernel update. From: Ernie Petrides <petrides@redhat.com> For background, the BAD_ADDR() macro should return TRUE if the address is TASK_SIZE, because that's the lowest address that is *not* valid for user-space mappings. The macro was correct in binfmt_aout.c but was wrong for the "equal to" case in binfmt_elf.c. There were two in-line validations of user-space addresses in binfmt_elf.c, which have been appropriately converted to use the corrected BAD_ADDR() macro in the patch you posted yesterday. Note that the size checks against TASK_SIZE are okay as coded. The additional changes that I propose are below. These are in the error paths for bad ELF entry addresses once load_elf_binary() has already committed to exec'ing the new image (following the tearing down of the task's original address space). The 1st hunk deals with the interp-side of the outer "if". There were two problems here. The printk() should be removed because this path can be triggered at will by a bogus interpreter image created and used by a malicious user. Further, the error code should not be ENOEXEC, because that causes the loop in search_binary_handler() to continue trying other exec handlers (twice, in fact). But it's too late for this to work correctly, because the user address space has already been torn down, and an exec() failure cannot be returned to the user code because the code no longer exists. The only recovery is to force a SIGSEGV, but it's best to terminate the search loop immediately. I somewhat arbitrarily chose EINVAL as a fallback error code, but any error returned by load_elf_interp() will override that (but this value will never be seen by user-space). The 2nd hunk deals with the non-interp-side of the outer "if". There were two problems here as well. The SIGSEGV needs to be forced, because a prior sigaction() syscall might have set the associated disposition to SIG_IGN. And the ENOEXEC should be changed to EINVAL as described above. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Ernie Petrides <petrides@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:14 -07:00
x86: randomize brk Randomize the location of the heap (brk) for i386 and x86_64. The range is randomized in the range starting at current brk location up to 0x02000000 offset for both architectures. This, together with pie-executable-randomization.patch and pie-executable-randomization-fix.patch, should make the address space randomization on i386 and x86_64 complete. Arjan says: This is known to break older versions of some emacs variants, whose dumper code assumed that the last variable declared in the program is equal to the start of the dynamically allocated memory region. (The dumper is the code where emacs effectively dumps core at the end of it's compilation stage; this coredump is then loaded as the main program during normal use) iirc this was 5 years or so; we found this way back when I was at RH and we first did the security stuff there (including this brk randomization). It wasn't all variants of emacs, and it got fixed as a result (I vaguely remember that emacs already had code to deal with it for other archs/oses, just ifdeffed wrongly). It's a rare and wrong assumption as a general thing, just on x86 it mostly happened to be true (but to be honest, it'll break too if gcc does something fancy or if the linker does a non-standard order). Still its something we should at least document. Note 2: afaik it only broke the emacs *build*. I'm not 100% sure about that (it IS 5 years ago) though. [ akpm@linux-foundation.org: deuglification ] Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:40 +01:00
x86: randomize brk Randomize the location of the heap (brk) for i386 and x86_64. The range is randomized in the range starting at current brk location up to 0x02000000 offset for both architectures. This, together with pie-executable-randomization.patch and pie-executable-randomization-fix.patch, should make the address space randomization on i386 and x86_64 complete. Arjan says: This is known to break older versions of some emacs variants, whose dumper code assumed that the last variable declared in the program is equal to the start of the dynamically allocated memory region. (The dumper is the code where emacs effectively dumps core at the end of it's compilation stage; this coredump is then loaded as the main program during normal use) iirc this was 5 years or so; we found this way back when I was at RH and we first did the security stuff there (including this brk randomization). It wasn't all variants of emacs, and it got fixed as a result (I vaguely remember that emacs already had code to deal with it for other archs/oses, just ifdeffed wrongly). It's a rare and wrong assumption as a general thing, just on x86 it mostly happened to be true (but to be honest, it'll break too if gcc does something fancy or if the linker does a non-standard order). Still its something we should at least document. Note 2: afaik it only broke the emacs *build*. I'm not 100% sure about that (it IS 5 years ago) though. [ akpm@linux-foundation.org: deuglification ] Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:40 +01:00
[PATCH] Support piping into commands in /proc/sys/kernel/core_pattern Using the infrastructure created in previous patches implement support to pipe core dumps into programs. This is done by overloading the existing core_pattern sysctl with a new syntax: |program When the first character of the pattern is a '|' the kernel will instead threat the rest of the pattern as a command to run. The core dump will be written to the standard input of that program instead of to a file. This is useful for having automatic core dump analysis without filling up disks. The program can do some simple analysis and save only a summary of the core dump. The core dump proces will run with the privileges and in the name space of the process that caused the core dump. I also increased the core pattern size to 128 bytes so that longer command lines fit. Most of the changes comes from allowing core dumps without seeks. They are fairly straight forward though. One small incompatibility is that if someone had a core pattern previously that started with '|' they will get suddenly new behaviour. I think that's unlikely to be a real problem though. Additional background: > Very nice, do you happen to have a program that can accept this kind of > input for crash dumps? I'm guessing that the embedded people will > really want this functionality. I had a cheesy demo/prototype. Basically it wrote the dump to a file again, ran gdb on it to get a backtrace and wrote the summary to a shared directory. Then there was a simple CGI script to generate a "top 10" crashes HTML listing. Unfortunately this still had the disadvantage to needing full disk space for a dump except for deleting it afterwards (in fact it was worse because over the pipe holes didn't work so if you have a holey address map it would require more space). Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as cores (at least it worked with zsh's =(cat core) syntax), so it would be likely possible to do it without temporary space with a simple wrapper that calls it in the right way. I ran out of time before doing that though. The demo prototype scripts weren't very good. If there is really interest I can dig them out (they are currently on a laptop disk on the desk with the laptop itself being in service), but I would recommend to rewrite them for any serious application of this and fix the disk space problem. Also to be really useful it should probably find a way to automatically fetch the debuginfos (I cheated and just installed them in advance). If nobody else does it I can probably do the rewrite myself again at some point. My hope at some point was that desktops would support it in their builtin crash reporters, but at least the KDE people I talked too seemed to be happy with their user space only solution. Alan sayeth: I don't believe that piping as such as neccessarily the right model, but the ability to intercept and processes core dumps from user space is asked for by many enterprise users as well. They want to know about, capture, analyse and process core dumps, often centrally and in automated form. [akpm@osdl.org: loff_t != unsigned long] Signed-off-by: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 23:29:28 -07:00
[PATCH] Support piping into commands in /proc/sys/kernel/core_pattern Using the infrastructure created in previous patches implement support to pipe core dumps into programs. This is done by overloading the existing core_pattern sysctl with a new syntax: |program When the first character of the pattern is a '|' the kernel will instead threat the rest of the pattern as a command to run. The core dump will be written to the standard input of that program instead of to a file. This is useful for having automatic core dump analysis without filling up disks. The program can do some simple analysis and save only a summary of the core dump. The core dump proces will run with the privileges and in the name space of the process that caused the core dump. I also increased the core pattern size to 128 bytes so that longer command lines fit. Most of the changes comes from allowing core dumps without seeks. They are fairly straight forward though. One small incompatibility is that if someone had a core pattern previously that started with '|' they will get suddenly new behaviour. I think that's unlikely to be a real problem though. Additional background: > Very nice, do you happen to have a program that can accept this kind of > input for crash dumps? I'm guessing that the embedded people will > really want this functionality. I had a cheesy demo/prototype. Basically it wrote the dump to a file again, ran gdb on it to get a backtrace and wrote the summary to a shared directory. Then there was a simple CGI script to generate a "top 10" crashes HTML listing. Unfortunately this still had the disadvantage to needing full disk space for a dump except for deleting it afterwards (in fact it was worse because over the pipe holes didn't work so if you have a holey address map it would require more space). Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as cores (at least it worked with zsh's =(cat core) syntax), so it would be likely possible to do it without temporary space with a simple wrapper that calls it in the right way. I ran out of time before doing that though. The demo prototype scripts weren't very good. If there is really interest I can dig them out (they are currently on a laptop disk on the desk with the laptop itself being in service), but I would recommend to rewrite them for any serious application of this and fix the disk space problem. Also to be really useful it should probably find a way to automatically fetch the debuginfos (I cheated and just installed them in advance). If nobody else does it I can probably do the rewrite myself again at some point. My hope at some point was that desktops would support it in their builtin crash reporters, but at least the KDE people I talked too seemed to be happy with their user space only solution. Alan sayeth: I don't believe that piping as such as neccessarily the right model, but the ability to intercept and processes core dumps from user space is asked for by many enterprise users as well. They want to know about, capture, analyse and process core dumps, often centrally and in automated form. [akpm@osdl.org: loff_t != unsigned long] Signed-off-by: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 23:29:28 -07:00
[PATCH] Support piping into commands in /proc/sys/kernel/core_pattern Using the infrastructure created in previous patches implement support to pipe core dumps into programs. This is done by overloading the existing core_pattern sysctl with a new syntax: |program When the first character of the pattern is a '|' the kernel will instead threat the rest of the pattern as a command to run. The core dump will be written to the standard input of that program instead of to a file. This is useful for having automatic core dump analysis without filling up disks. The program can do some simple analysis and save only a summary of the core dump. The core dump proces will run with the privileges and in the name space of the process that caused the core dump. I also increased the core pattern size to 128 bytes so that longer command lines fit. Most of the changes comes from allowing core dumps without seeks. They are fairly straight forward though. One small incompatibility is that if someone had a core pattern previously that started with '|' they will get suddenly new behaviour. I think that's unlikely to be a real problem though. Additional background: > Very nice, do you happen to have a program that can accept this kind of > input for crash dumps? I'm guessing that the embedded people will > really want this functionality. I had a cheesy demo/prototype. Basically it wrote the dump to a file again, ran gdb on it to get a backtrace and wrote the summary to a shared directory. Then there was a simple CGI script to generate a "top 10" crashes HTML listing. Unfortunately this still had the disadvantage to needing full disk space for a dump except for deleting it afterwards (in fact it was worse because over the pipe holes didn't work so if you have a holey address map it would require more space). Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as cores (at least it worked with zsh's =(cat core) syntax), so it would be likely possible to do it without temporary space with a simple wrapper that calls it in the right way. I ran out of time before doing that though. The demo prototype scripts weren't very good. If there is really interest I can dig them out (they are currently on a laptop disk on the desk with the laptop itself being in service), but I would recommend to rewrite them for any serious application of this and fix the disk space problem. Also to be really useful it should probably find a way to automatically fetch the debuginfos (I cheated and just installed them in advance). If nobody else does it I can probably do the rewrite myself again at some point. My hope at some point was that desktops would support it in their builtin crash reporters, but at least the KDE people I talked too seemed to be happy with their user space only solution. Alan sayeth: I don't believe that piping as such as neccessarily the right model, but the ability to intercept and processes core dumps from user space is asked for by many enterprise users as well. They want to know about, capture, analyse and process core dumps, often centrally and in automated form. [akpm@osdl.org: loff_t != unsigned long] Signed-off-by: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 23:29:28 -07:00
[PATCH] Support piping into commands in /proc/sys/kernel/core_pattern Using the infrastructure created in previous patches implement support to pipe core dumps into programs. This is done by overloading the existing core_pattern sysctl with a new syntax: |program When the first character of the pattern is a '|' the kernel will instead threat the rest of the pattern as a command to run. The core dump will be written to the standard input of that program instead of to a file. This is useful for having automatic core dump analysis without filling up disks. The program can do some simple analysis and save only a summary of the core dump. The core dump proces will run with the privileges and in the name space of the process that caused the core dump. I also increased the core pattern size to 128 bytes so that longer command lines fit. Most of the changes comes from allowing core dumps without seeks. They are fairly straight forward though. One small incompatibility is that if someone had a core pattern previously that started with '|' they will get suddenly new behaviour. I think that's unlikely to be a real problem though. Additional background: > Very nice, do you happen to have a program that can accept this kind of > input for crash dumps? I'm guessing that the embedded people will > really want this functionality. I had a cheesy demo/prototype. Basically it wrote the dump to a file again, ran gdb on it to get a backtrace and wrote the summary to a shared directory. Then there was a simple CGI script to generate a "top 10" crashes HTML listing. Unfortunately this still had the disadvantage to needing full disk space for a dump except for deleting it afterwards (in fact it was worse because over the pipe holes didn't work so if you have a holey address map it would require more space). Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as cores (at least it worked with zsh's =(cat core) syntax), so it would be likely possible to do it without temporary space with a simple wrapper that calls it in the right way. I ran out of time before doing that though. The demo prototype scripts weren't very good. If there is really interest I can dig them out (they are currently on a laptop disk on the desk with the laptop itself being in service), but I would recommend to rewrite them for any serious application of this and fix the disk space problem. Also to be really useful it should probably find a way to automatically fetch the debuginfos (I cheated and just installed them in advance). If nobody else does it I can probably do the rewrite myself again at some point. My hope at some point was that desktops would support it in their builtin crash reporters, but at least the KDE people I talked too seemed to be happy with their user space only solution. Alan sayeth: I don't believe that piping as such as neccessarily the right model, but the ability to intercept and processes core dumps from user space is asked for by many enterprise users as well. They want to know about, capture, analyse and process core dumps, often centrally and in automated form. [akpm@osdl.org: loff_t != unsigned long] Signed-off-by: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 23:29:28 -07:00
[PATCH] Support piping into commands in /proc/sys/kernel/core_pattern Using the infrastructure created in previous patches implement support to pipe core dumps into programs. This is done by overloading the existing core_pattern sysctl with a new syntax: |program When the first character of the pattern is a '|' the kernel will instead threat the rest of the pattern as a command to run. The core dump will be written to the standard input of that program instead of to a file. This is useful for having automatic core dump analysis without filling up disks. The program can do some simple analysis and save only a summary of the core dump. The core dump proces will run with the privileges and in the name space of the process that caused the core dump. I also increased the core pattern size to 128 bytes so that longer command lines fit. Most of the changes comes from allowing core dumps without seeks. They are fairly straight forward though. One small incompatibility is that if someone had a core pattern previously that started with '|' they will get suddenly new behaviour. I think that's unlikely to be a real problem though. Additional background: > Very nice, do you happen to have a program that can accept this kind of > input for crash dumps? I'm guessing that the embedded people will > really want this functionality. I had a cheesy demo/prototype. Basically it wrote the dump to a file again, ran gdb on it to get a backtrace and wrote the summary to a shared directory. Then there was a simple CGI script to generate a "top 10" crashes HTML listing. Unfortunately this still had the disadvantage to needing full disk space for a dump except for deleting it afterwards (in fact it was worse because over the pipe holes didn't work so if you have a holey address map it would require more space). Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as cores (at least it worked with zsh's =(cat core) syntax), so it would be likely possible to do it without temporary space with a simple wrapper that calls it in the right way. I ran out of time before doing that though. The demo prototype scripts weren't very good. If there is really interest I can dig them out (they are currently on a laptop disk on the desk with the laptop itself being in service), but I would recommend to rewrite them for any serious application of this and fix the disk space problem. Also to be really useful it should probably find a way to automatically fetch the debuginfos (I cheated and just installed them in advance). If nobody else does it I can probably do the rewrite myself again at some point. My hope at some point was that desktops would support it in their builtin crash reporters, but at least the KDE people I talked too seemed to be happy with their user space only solution. Alan sayeth: I don't believe that piping as such as neccessarily the right model, but the ability to intercept and processes core dumps from user space is asked for by many enterprise users as well. They want to know about, capture, analyse and process core dumps, often centrally and in automated form. [akpm@osdl.org: loff_t != unsigned long] Signed-off-by: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 23:29:28 -07:00
[PATCH] Support piping into commands in /proc/sys/kernel/core_pattern Using the infrastructure created in previous patches implement support to pipe core dumps into programs. This is done by overloading the existing core_pattern sysctl with a new syntax: |program When the first character of the pattern is a '|' the kernel will instead threat the rest of the pattern as a command to run. The core dump will be written to the standard input of that program instead of to a file. This is useful for having automatic core dump analysis without filling up disks. The program can do some simple analysis and save only a summary of the core dump. The core dump proces will run with the privileges and in the name space of the process that caused the core dump. I also increased the core pattern size to 128 bytes so that longer command lines fit. Most of the changes comes from allowing core dumps without seeks. They are fairly straight forward though. One small incompatibility is that if someone had a core pattern previously that started with '|' they will get suddenly new behaviour. I think that's unlikely to be a real problem though. Additional background: > Very nice, do you happen to have a program that can accept this kind of > input for crash dumps? I'm guessing that the embedded people will > really want this functionality. I had a cheesy demo/prototype. Basically it wrote the dump to a file again, ran gdb on it to get a backtrace and wrote the summary to a shared directory. Then there was a simple CGI script to generate a "top 10" crashes HTML listing. Unfortunately this still had the disadvantage to needing full disk space for a dump except for deleting it afterwards (in fact it was worse because over the pipe holes didn't work so if you have a holey address map it would require more space). Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as cores (at least it worked with zsh's =(cat core) syntax), so it would be likely possible to do it without temporary space with a simple wrapper that calls it in the right way. I ran out of time before doing that though. The demo prototype scripts weren't very good. If there is really interest I can dig them out (they are currently on a laptop disk on the desk with the laptop itself being in service), but I would recommend to rewrite them for any serious application of this and fix the disk space problem. Also to be really useful it should probably find a way to automatically fetch the debuginfos (I cheated and just installed them in advance). If nobody else does it I can probably do the rewrite myself again at some point. My hope at some point was that desktops would support it in their builtin crash reporters, but at least the KDE people I talked too seemed to be happy with their user space only solution. Alan sayeth: I don't believe that piping as such as neccessarily the right model, but the ability to intercept and processes core dumps from user space is asked for by many enterprise users as well. They want to know about, capture, analyse and process core dumps, often centrally and in automated form. [akpm@osdl.org: loff_t != unsigned long] Signed-off-by: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 23:29:28 -07:00
[PATCH] Support piping into commands in /proc/sys/kernel/core_pattern Using the infrastructure created in previous patches implement support to pipe core dumps into programs. This is done by overloading the existing core_pattern sysctl with a new syntax: |program When the first character of the pattern is a '|' the kernel will instead threat the rest of the pattern as a command to run. The core dump will be written to the standard input of that program instead of to a file. This is useful for having automatic core dump analysis without filling up disks. The program can do some simple analysis and save only a summary of the core dump. The core dump proces will run with the privileges and in the name space of the process that caused the core dump. I also increased the core pattern size to 128 bytes so that longer command lines fit. Most of the changes comes from allowing core dumps without seeks. They are fairly straight forward though. One small incompatibility is that if someone had a core pattern previously that started with '|' they will get suddenly new behaviour. I think that's unlikely to be a real problem though. Additional background: > Very nice, do you happen to have a program that can accept this kind of > input for crash dumps? I'm guessing that the embedded people will > really want this functionality. I had a cheesy demo/prototype. Basically it wrote the dump to a file again, ran gdb on it to get a backtrace and wrote the summary to a shared directory. Then there was a simple CGI script to generate a "top 10" crashes HTML listing. Unfortunately this still had the disadvantage to needing full disk space for a dump except for deleting it afterwards (in fact it was worse because over the pipe holes didn't work so if you have a holey address map it would require more space). Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as cores (at least it worked with zsh's =(cat core) syntax), so it would be likely possible to do it without temporary space with a simple wrapper that calls it in the right way. I ran out of time before doing that though. The demo prototype scripts weren't very good. If there is really interest I can dig them out (they are currently on a laptop disk on the desk with the laptop itself being in service), but I would recommend to rewrite them for any serious application of this and fix the disk space problem. Also to be really useful it should probably find a way to automatically fetch the debuginfos (I cheated and just installed them in advance). If nobody else does it I can probably do the rewrite myself again at some point. My hope at some point was that desktops would support it in their builtin crash reporters, but at least the KDE people I talked too seemed to be happy with their user space only solution. Alan sayeth: I don't believe that piping as such as neccessarily the right model, but the ability to intercept and processes core dumps from user space is asked for by many enterprise users as well. They want to know about, capture, analyse and process core dumps, often centrally and in automated form. [akpm@osdl.org: loff_t != unsigned long] Signed-off-by: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 23:29:28 -07:00
core_pattern: ignore RLIMIT_CORE if core_pattern is a pipe For some time /proc/sys/kernel/core_pattern has been able to set its output destination as a pipe, allowing a user space helper to receive and intellegently process a core. This infrastructure however has some shortcommings which can be enhanced. Specifically: 1) The coredump code in the kernel should ignore RLIMIT_CORE limitation when core_pattern is a pipe, since file system resources are not being consumed in this case, unless the user application wishes to save the core, at which point the app is restricted by usual file system limits and restrictions. 2) The core_pattern code should be able to parse and pass options to the user space helper as an argv array. The real core limit of the uid of the crashing proces should also be passable to the user space helper (since it is overridden to zero when called). 3) Some miscellaneous bugs need to be cleaned up (specifically the recognition of a recursive core dump, should the user mode helper itself crash. Also, the core dump code in the kernel should not wait for the user mode helper to exit, since the same context is responsible for writing to the pipe, and a read of the pipe by the user mode helper will result in a deadlock. This patch: Remove the check of RLIMIT_CORE if core_pattern is a pipe. In the event that core_pattern is a pipe, the entire core will be fed to the user mode helper. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: <martin.pitt@ubuntu.com> Cc: <wwoods@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:26:34 -07:00
[PATCH] Support piping into commands in /proc/sys/kernel/core_pattern Using the infrastructure created in previous patches implement support to pipe core dumps into programs. This is done by overloading the existing core_pattern sysctl with a new syntax: |program When the first character of the pattern is a '|' the kernel will instead threat the rest of the pattern as a command to run. The core dump will be written to the standard input of that program instead of to a file. This is useful for having automatic core dump analysis without filling up disks. The program can do some simple analysis and save only a summary of the core dump. The core dump proces will run with the privileges and in the name space of the process that caused the core dump. I also increased the core pattern size to 128 bytes so that longer command lines fit. Most of the changes comes from allowing core dumps without seeks. They are fairly straight forward though. One small incompatibility is that if someone had a core pattern previously that started with '|' they will get suddenly new behaviour. I think that's unlikely to be a real problem though. Additional background: > Very nice, do you happen to have a program that can accept this kind of > input for crash dumps? I'm guessing that the embedded people will > really want this functionality. I had a cheesy demo/prototype. Basically it wrote the dump to a file again, ran gdb on it to get a backtrace and wrote the summary to a shared directory. Then there was a simple CGI script to generate a "top 10" crashes HTML listing. Unfortunately this still had the disadvantage to needing full disk space for a dump except for deleting it afterwards (in fact it was worse because over the pipe holes didn't work so if you have a holey address map it would require more space). Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as cores (at least it worked with zsh's =(cat core) syntax), so it would be likely possible to do it without temporary space with a simple wrapper that calls it in the right way. I ran out of time before doing that though. The demo prototype scripts weren't very good. If there is really interest I can dig them out (they are currently on a laptop disk on the desk with the laptop itself being in service), but I would recommend to rewrite them for any serious application of this and fix the disk space problem. Also to be really useful it should probably find a way to automatically fetch the debuginfos (I cheated and just installed them in advance). If nobody else does it I can probably do the rewrite myself again at some point. My hope at some point was that desktops would support it in their builtin crash reporters, but at least the KDE people I talked too seemed to be happy with their user space only solution. Alan sayeth: I don't believe that piping as such as neccessarily the right model, but the ability to intercept and processes core dumps from user space is asked for by many enterprise users as well. They want to know about, capture, analyse and process core dumps, often centrally and in automated form. [akpm@osdl.org: loff_t != unsigned long] Signed-off-by: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 23:29:28 -07:00
[PATCH] Support piping into commands in /proc/sys/kernel/core_pattern Using the infrastructure created in previous patches implement support to pipe core dumps into programs. This is done by overloading the existing core_pattern sysctl with a new syntax: |program When the first character of the pattern is a '|' the kernel will instead threat the rest of the pattern as a command to run. The core dump will be written to the standard input of that program instead of to a file. This is useful for having automatic core dump analysis without filling up disks. The program can do some simple analysis and save only a summary of the core dump. The core dump proces will run with the privileges and in the name space of the process that caused the core dump. I also increased the core pattern size to 128 bytes so that longer command lines fit. Most of the changes comes from allowing core dumps without seeks. They are fairly straight forward though. One small incompatibility is that if someone had a core pattern previously that started with '|' they will get suddenly new behaviour. I think that's unlikely to be a real problem though. Additional background: > Very nice, do you happen to have a program that can accept this kind of > input for crash dumps? I'm guessing that the embedded people will > really want this functionality. I had a cheesy demo/prototype. Basically it wrote the dump to a file again, ran gdb on it to get a backtrace and wrote the summary to a shared directory. Then there was a simple CGI script to generate a "top 10" crashes HTML listing. Unfortunately this still had the disadvantage to needing full disk space for a dump except for deleting it afterwards (in fact it was worse because over the pipe holes didn't work so if you have a holey address map it would require more space). Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as cores (at least it worked with zsh's =(cat core) syntax), so it would be likely possible to do it without temporary space with a simple wrapper that calls it in the right way. I ran out of time before doing that though. The demo prototype scripts weren't very good. If there is really interest I can dig them out (they are currently on a laptop disk on the desk with the laptop itself being in service), but I would recommend to rewrite them for any serious application of this and fix the disk space problem. Also to be really useful it should probably find a way to automatically fetch the debuginfos (I cheated and just installed them in advance). If nobody else does it I can probably do the rewrite myself again at some point. My hope at some point was that desktops would support it in their builtin crash reporters, but at least the KDE people I talked too seemed to be happy with their user space only solution. Alan sayeth: I don't believe that piping as such as neccessarily the right model, but the ability to intercept and processes core dumps from user space is asked for by many enterprise users as well. They want to know about, capture, analyse and process core dumps, often centrally and in automated form. [akpm@osdl.org: loff_t != unsigned long] Signed-off-by: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 23:29:28 -07:00
[PATCH] Support piping into commands in /proc/sys/kernel/core_pattern Using the infrastructure created in previous patches implement support to pipe core dumps into programs. This is done by overloading the existing core_pattern sysctl with a new syntax: |program When the first character of the pattern is a '|' the kernel will instead threat the rest of the pattern as a command to run. The core dump will be written to the standard input of that program instead of to a file. This is useful for having automatic core dump analysis without filling up disks. The program can do some simple analysis and save only a summary of the core dump. The core dump proces will run with the privileges and in the name space of the process that caused the core dump. I also increased the core pattern size to 128 bytes so that longer command lines fit. Most of the changes comes from allowing core dumps without seeks. They are fairly straight forward though. One small incompatibility is that if someone had a core pattern previously that started with '|' they will get suddenly new behaviour. I think that's unlikely to be a real problem though. Additional background: > Very nice, do you happen to have a program that can accept this kind of > input for crash dumps? I'm guessing that the embedded people will > really want this functionality. I had a cheesy demo/prototype. Basically it wrote the dump to a file again, ran gdb on it to get a backtrace and wrote the summary to a shared directory. Then there was a simple CGI script to generate a "top 10" crashes HTML listing. Unfortunately this still had the disadvantage to needing full disk space for a dump except for deleting it afterwards (in fact it was worse because over the pipe holes didn't work so if you have a holey address map it would require more space). Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as cores (at least it worked with zsh's =(cat core) syntax), so it would be likely possible to do it without temporary space with a simple wrapper that calls it in the right way. I ran out of time before doing that though. The demo prototype scripts weren't very good. If there is really interest I can dig them out (they are currently on a laptop disk on the desk with the laptop itself being in service), but I would recommend to rewrite them for any serious application of this and fix the disk space problem. Also to be really useful it should probably find a way to automatically fetch the debuginfos (I cheated and just installed them in advance). If nobody else does it I can probably do the rewrite myself again at some point. My hope at some point was that desktops would support it in their builtin crash reporters, but at least the KDE people I talked too seemed to be happy with their user space only solution. Alan sayeth: I don't believe that piping as such as neccessarily the right model, but the ability to intercept and processes core dumps from user space is asked for by many enterprise users as well. They want to know about, capture, analyse and process core dumps, often centrally and in automated form. [akpm@osdl.org: loff_t != unsigned long] Signed-off-by: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 23:29:28 -07:00
remove ZERO_PAGE The commit b5810039a54e5babf428e9a1e89fc1940fabff11 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:24:40 -07:00