linux

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: remove stale comments from ide-dma.c (take 2) - ide-dma.c is not a separate module - ide-dma.c is not PCI specific anymore - DMA is enabled by default nowadays - link for Intel Zappa BIOS is dead etc. v2: * Some comments should be preserved. (Noticed by Mark Lord) Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-26 21:50:36 +01:00

ide: update/add my Copyrights The last years stuff and a trip down memory lane... Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-01 23:09:33 +01:00

ide: delete filenames/versions from comments Delete filenames/versions from comments. I'm leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s to maintainers of the respective drivers. While at it: * Remove unused VERSION define from ide.c. * Remove unused/stale DRV_VERSION define from au1xxx-ide.c. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-01 23:09:33 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: remove stale comments from ide-dma.c (take 2) - ide-dma.c is not a separate module - ide-dma.c is not PCI specific anymore - DMA is enabled by default nowadays - link for Intel Zappa BIOS is dead etc. v2: * Some comments should be preserved. (Noticed by Mark Lord) Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-26 21:50:36 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

2010-03-24 17:04:11 +09:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed They were getting this implicitly by an include of module.h from device.h -- but we are going to clean that up and break that include chain, so include export.h explicitly now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

2011-07-17 15:33:58 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: switch to DMA-mapping API * pci_map_sg() -> dma_map_sg() in ide_build_sglist(). * pci_unmap_sg() -> dma_unmap_sg() in ide_destroy_dmatable(). There should be no functionality changes caused by this patch except for blackfin arch whose dma_[un]map_sg() implementation differs from pci_[un]map_sg() one (on s390 arch there is no PCI, on avr32 and h8300 archs PCI is currently unsupported, on m32r arch PCI support depends on BROKEN, on m68k arch PCI support depends on HADES which in turn depends on BROKEN, on all other archs dma_[un]map_sg() functionality matches with pci_[un]map_sg() one). blackfin behavior change was ack-ed by Bryan Wu. Cc: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-01 23:09:32 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: cleanup ide-dma.c - s/HWIF(drive)/drive->hwif/ - s/HWGROUP(drive)/[drive->]hwif->hwgroup/ - fixup error messages in ide_dma_intr() & dma_timer_expiry() - fix checkpatch.pl errors/warnings Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

ide_in_drive_list(): accept NULL as the wildcard for firmware revision Earlier, the matching of (model,rev) in ide-dma black/white list handling was to consider "ALL" in the table to match any revision. This makes NULL to be also an accepted wildcard, and changes the entries of tables in ide-dma.c to use NULL. The code still accepts "ALL" as the wildcard, in order to keep any out-of-tree ide driver that feeds its own table that uses "ALL" as the wildcard to ide_in_drive_list() function from breaking. Signed-off-by: Junio C Hamano <junkio@cox.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-07-09 23:17:56 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: cleanup ide-dma.c - s/HWIF(drive)/drive->hwif/ - s/HWGROUP(drive)/[drive->]hwif->hwgroup/ - fixup error messages in ide_dma_intr() & dma_timer_expiry() - fix checkpatch.pl errors/warnings Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

ide_in_drive_list(): accept NULL as the wildcard for firmware revision Earlier, the matching of (model,rev) in ide-dma black/white list handling was to consider "ALL" in the table to match any revision. This makes NULL to be also an accepted wildcard, and changes the entries of tables in ide-dma.c to use NULL. The code still accepts "ALL" as the wildcard, in order to keep any out-of-tree ide driver that feeds its own table that uses "ALL" as the wildcard to ide_in_drive_list() function from breaking. Signed-off-by: Junio C Hamano <junkio@cox.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-07-09 23:17:56 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide_in_drive_list(): accept NULL as the wildcard for firmware revision Earlier, the matching of (model,rev) in ide-dma black/white list handling was to consider "ALL" in the table to match any revision. This makes NULL to be also an accepted wildcard, and changes the entries of tables in ide-dma.c to use NULL. The code still accepts "ALL" as the wildcard, in order to keep any out-of-tree ide driver that feeds its own table that uses "ALL" as the wildcard to ide_in_drive_list() function from breaking. Signed-off-by: Junio C Hamano <junkio@cox.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-07-09 23:17:56 +02:00

Match DMA blacklist entries between ide-dma.c and libata-core.c There are a few entries in ata_device_blacklist[] in libata-core.c marked with HORKAGE_NODMA but are missing from drive_blacklist[] in ide-dma.c. This patch makes the lists in sync. Also remove a duplicated entry for "SanDisk SDP3B-64". Signed-off-by: Junio C Hamano <junkio@cox.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-24 02:42:38 +02:00

ide_in_drive_list(): accept NULL as the wildcard for firmware revision Earlier, the matching of (model,rev) in ide-dma black/white list handling was to consider "ALL" in the table to match any revision. This makes NULL to be also an accepted wildcard, and changes the entries of tables in ide-dma.c to use NULL. The code still accepts "ALL" as the wildcard, in order to keep any out-of-tree ide driver that feeds its own table that uses "ALL" as the wildcard to ide_in_drive_list() function from breaking. Signed-off-by: Junio C Hamano <junkio@cox.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-07-09 23:17:56 +02:00

ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist Based on the report from snowbat@gmail.com. Fixes kernel bugzilla bug #9195. Tested-by: snowbat@gmail.com Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-11-27 21:35:56 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: cleanup ide-dma.c - s/HWIF(drive)/drive->hwif/ - s/HWGROUP(drive)/[drive->]hwif->hwgroup/ - fixup error messages in ide_dma_intr() & dma_timer_expiry() - fix checkpatch.pl errors/warnings Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: cleanup ide-dma.c - s/HWIF(drive)/drive->hwif/ - s/HWGROUP(drive)/[drive->]hwif->hwgroup/ - fixup error messages in ide_dma_intr() & dma_timer_expiry() - fix checkpatch.pl errors/warnings Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: add ->read_status method * Remove ide_read_status() inline helper. * Add ->read_status method for reading ATA Status register and use it instead of ->INB. While at it: * Don't use HWGROUP() macro. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-07-23 19:55:52 +02:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: set/clear drive->waiting_for_dma flag in the core code Set/clear drive->waiting_for_dma flag in the core code instead of in ->dma_setup and ->dma_end methods. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:22 +02:00

ide: add ->read_status method * Remove ide_read_status() inline helper. * Add ->read_status method for reading ATA Status register and use it instead of ->INB. While at it: * Don't use HWGROUP() macro. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-07-23 19:55:52 +02:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

ide: add struct ide_tp_ops (take 2) * Add struct ide_tp_ops for transport methods. * Add 'const struct ide_tp_ops *tp_ops' to struct ide_port_info and ide_hwif_t. * Set the default hwif->tp_ops in ide_init_port_data(). * Set host driver specific hwif->tp_ops in ide_init_port(). * Export ide_exec_command(), ide_read_status(), ide_read_altstatus(), ide_read_sff_dma_status(), ide_set_irq(), ide_tf_{load,read}() and ata_{in,out}put_data(). * Convert host drivers and core code to use struct ide_tp_ops. * Remove no longer needed default_hwif_transport(). * Cleanup ide_hwif_t from methods that are now in struct ide_tp_ops. While at it: * Use struct ide_port_info in falconide.c and q40ide.c. * Rename ata_{in,out}put_data() to ide_{in,out}put_data(). v2: * Fix missing convertion in ns87415.c. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-07-23 19:55:56 +02:00

ide: add ide_read_[alt]status() inline helpers Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-06 02:57:51 +01:00

ide: use ATA_* defines instead of *_STAT and *_ERR ones * ERR_STAT -> ATA_ERR * INDEX_STAT -> ATA_IDX * ECC_STAT -> ATA_CORR * DRQ_STAT -> ATA_DRQ * SEEK_STAT -> ATA_DSC * WRERR_STAT -> ATA_DF * READY_STAT -> ATA_DRDY * BUSY_STAT -> ATA_BUSY * MARK_ERR -> ATA_AMNF * TRK0_ERR -> ATA_TRK0NF * ABRT_ERR -> ATA_ABORTED * MCR_ERR -> ATA_MCR * ID_ERR -> ATA_IDNF * MC_ERR -> ATA_MC * ECC_ERR -> ATA_UNC * ICRC_ERR -> ATA_ICRC * BBD_ERR -> ATA_BBK Also: * ILI_ERR -> ATAPI_ILI * EOM_ERR -> ATAPI_EOM * LFS_ERR -> ATAPI_LFS * CD -> ATAPI_COD * IO -> ATAPI_IO Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-10 22:39:21 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: sanitize ide_finish_cmd() * Move ide_end_request() call out from ide_finish_cmd() to its users. * Use ide_finish_cmd() in task_no_data_intr(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-27 12:46:42 +01:00

ide: remove ide_end_request() * Add ide_rq_bytes() helper. * Add blk_noretry_request() quirk to ide_complete_rq() (currently only fs requests can be marked as "noretry" so there is no change in behavior). * Switch current ide_end_request() users to use ide_complete_rq(). [ No need to check for rq->nr_sectors == 0 in {ide_dma,task_pio}_intr(), nsectors == 0 in cdrom_end_request() and err == 0 in ide_do_devset(). ] * Remove no longer needed ide_end_request(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-27 12:46:45 +01:00

ide: convert to rq pos and nr_sectors accessors ide doesn't manipulate request fields anymore and thus all hard and their soft equivalents are always equal. Convert all references to accessors. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2009-05-07 22:24:40 +09:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: cleanup ide-dma.c - s/HWIF(drive)/drive->hwif/ - s/HWGROUP(drive)/[drive->]hwif->hwgroup/ - fixup error messages in ide_dma_intr() & dma_timer_expiry() - fix checkpatch.pl errors/warnings Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: move SFF DMA code to ide-dma-sff.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

icside: use ide_tune_dma() * Add "good DMA drives" hack for icside to ide-dma.c::ide_find_dma_mode() (in the long-term it should be either removed or generalized for all hosts). * Use ide_tune_dma() in icside.c::icside_dma_check(). This results in the following changes in behavior: - pre-EIDE SWDMA modes are now also respected - drive->autodma is checked instead of hwif->autodma (doesn't really matter as icside sets both to "1") * Make ide-dma.c::__ide_dma_good_drive() static and drop "__" prefix. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-13 17:47:50 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

ide: pass command to ide_map_sg() * Set IDE_TFLAG_WRITE flag and ->rq also for ATA_CMD_PACKET commands. * Pass command to ->dma_setup method and update all its implementations accordingly. * Pass command instead of request to ide_build_sglist(), *_build_dmatable() and ide_map_sg(). While at it: * Fix scc_dma_setup() documentation + use ATA_DMA_WR define. * Rename sgiioc4_build_dma_table() to sgiioc4_build_dmatable(), change return value type to 'int' and drop unused 'ddir' argument. * Do some minor cleanups in [tx4939]ide_dma_setup(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-27 12:46:46 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: switch to DMA-mapping API * pci_map_sg() -> dma_map_sg() in ide_build_sglist(). * pci_unmap_sg() -> dma_unmap_sg() in ide_destroy_dmatable(). There should be no functionality changes caused by this patch except for blackfin arch whose dma_[un]map_sg() implementation differs from pci_[un]map_sg() one (on s390 arch there is no PCI, on avr32 and h8300 archs PCI is currently unsupported, on m32r arch PCI support depends on BROKEN, on m68k arch PCI support depends on HADES which in turn depends on BROKEN, on all other archs dma_[un]map_sg() functionality matches with pci_[un]map_sg() one). blackfin behavior change was ack-ed by Bryan Wu. Cc: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-01 23:09:32 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: switch to DMA-mapping API * pci_map_sg() -> dma_map_sg() in ide_build_sglist(). * pci_unmap_sg() -> dma_unmap_sg() in ide_destroy_dmatable(). There should be no functionality changes caused by this patch except for blackfin arch whose dma_[un]map_sg() implementation differs from pci_[un]map_sg() one (on s390 arch there is no PCI, on avr32 and h8300 archs PCI is currently unsupported, on m32r arch PCI support depends on BROKEN, on m68k arch PCI support depends on HADES which in turn depends on BROKEN, on all other archs dma_[un]map_sg() functionality matches with pci_[un]map_sg() one). blackfin behavior change was ack-ed by Bryan Wu. Cc: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-01 23:09:32 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: cleanup ide-dma.c - s/HWIF(drive)/drive->hwif/ - s/HWGROUP(drive)/[drive->]hwif->hwgroup/ - fixup error messages in ide_dma_intr() & dma_timer_expiry() - fix checkpatch.pl errors/warnings Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: save the returned value of dma_map_sg dma_map_sg could return a value different to 'nents' argument of dma_map_sg so the ide stack needs to save it for the later usage (e.g. for_each_sg). The ide stack also needs to save the original sg_nents value for pci_unmap_sg. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> [bart: backport to Linus' tree] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-13 21:16:13 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: pass command to ide_map_sg() * Set IDE_TFLAG_WRITE flag and ->rq also for ATA_CMD_PACKET commands. * Pass command to ->dma_setup method and update all its implementations accordingly. * Pass command instead of request to ide_build_sglist(), *_build_dmatable() and ide_map_sg(). While at it: * Fix scc_dma_setup() documentation + use ATA_DMA_WR define. * Rename sgiioc4_build_dma_table() to sgiioc4_build_dmatable(), change return value type to 'int' and drop unused 'ddir' argument. * Do some minor cleanups in [tx4939]ide_dma_setup(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-27 12:46:46 +01:00

ide: move command related fields from ide_hwif_t to struct ide_cmd * Move command related fields from ide_hwif_t to struct ide_cmd. * Make ide_init_sg_cmd() take command and sectors number as arguments. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-27 12:46:38 +01:00

ide: pass command to ide_map_sg() * Set IDE_TFLAG_WRITE flag and ->rq also for ATA_CMD_PACKET commands. * Pass command to ->dma_setup method and update all its implementations accordingly. * Pass command instead of request to ide_build_sglist(), *_build_dmatable() and ide_map_sg(). While at it: * Fix scc_dma_setup() documentation + use ATA_DMA_WR define. * Rename sgiioc4_build_dma_table() to sgiioc4_build_dmatable(), change return value type to 'int' and drop unused 'ddir' argument. * Do some minor cleanups in [tx4939]ide_dma_setup(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-27 12:46:46 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: move command related fields from ide_hwif_t to struct ide_cmd * Move command related fields from ide_hwif_t to struct ide_cmd. * Make ide_init_sg_cmd() take command and sectors number as arguments. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-27 12:46:38 +01:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

ide: move command related fields from ide_hwif_t to struct ide_cmd * Move command related fields from ide_hwif_t to struct ide_cmd. * Make ide_init_sg_cmd() take command and sectors number as arguments. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-27 12:46:38 +01:00

ide: save the returned value of dma_map_sg dma_map_sg could return a value different to 'nents' argument of dma_map_sg so the ide stack needs to save it for the later usage (e.g. for_each_sg). The ide stack also needs to save the original sg_nents value for pci_unmap_sg. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> [bart: backport to Linus' tree] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-13 21:16:13 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: cleanup ide-dma.c - s/HWIF(drive)/drive->hwif/ - s/HWGROUP(drive)/[drive->]hwif->hwgroup/ - fixup error messages in ide_dma_intr() & dma_timer_expiry() - fix checkpatch.pl errors/warnings Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_t Keep pointer to struct device instead of struct pci_dev in ide_hwif_t. While on it: * Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-01 23:09:31 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: move command related fields from ide_hwif_t to struct ide_cmd * Move command related fields from ide_hwif_t to struct ide_cmd. * Make ide_init_sg_cmd() take command and sectors number as arguments. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-27 12:46:38 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2) * since ide_hwif_t.ide_dma_{host_off,off_quietly} always return '0' make these functions void and while at it drop "ide_" prefix * fix comment for __ide_dma_off_quietly() * make __ide_dma_{host_off,off_quietly,off}() void and drop "__" prefix v2: * while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(), sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}() and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly() [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-02-17 02:40:26 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: cleanup ide-dma.c - s/HWIF(drive)/drive->hwif/ - s/HWGROUP(drive)/[drive->]hwif->hwgroup/ - fixup error messages in ide_dma_intr() & dma_timer_expiry() - fix checkpatch.pl errors/warnings Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2) * since ide_hwif_t.ide_dma_{host_off,off_quietly} always return '0' make these functions void and while at it drop "ide_" prefix * fix comment for __ide_dma_off_quietly() * make __ide_dma_{host_off,off_quietly,off}() void and drop "__" prefix v2: * while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(), sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}() and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly() [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-02-17 02:40:26 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: add device flags Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields to IDE_DFLAG_* flags. While at it: - IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48 - fixup some comments - remove needless g->flags zeroing from ide*_probe() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:36 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: add struct ide_dma_ops (take 3) Add struct ide_dma_ops and convert core code + drivers to use it. While at it: * Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods. * Drop "ide_" "infixes" from DMA methods. * au1xxx-ide.c: - use auide_dma_{test_irq,end}() directly in auide_dma_timeout() * pdc202xx_old.c: - drop "old_" "infixes" from DMA methods * siimage.c: - add siimage_dma_test_irq() helper - print SATA warning in siimage_init_one() * Remove no longer needed ->init_hwif implementations. v2: * Changes based on review from Sergei: - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/ - s/drive->hwif/hwif/ in idefloppy_pc_intr(). - fix patch description w.r.t. au1xxx-ide changes - fix au1xxx-ide build - fix naming for cmd64*_dma_ops - drop "ide_" and "old_" infixes - s/hpt3xxx_dma_ops/hpt37x_dma_ops/ - s/hpt370x_dma_ops/hpt370_dma_ops/ - use correct DMA ops for HPT302/N, HPT371/N and HPT374 - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/ v3: * Two bugs slipped in v2 (noticed by Sergei): - use correct DMA ops for HPT374 (for real this time) - handle HPT370/HPT370A properly Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-04-26 22:25:24 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2) * since ide_hwif_t.ide_dma_{host_off,off_quietly} always return '0' make these functions void and while at it drop "ide_" prefix * fix comment for __ide_dma_off_quietly() * make __ide_dma_{host_off,off_quietly,off}() void and drop "__" prefix v2: * while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(), sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}() and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly() [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-02-17 02:40:26 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2) * since ide_hwif_t.ide_dma_{host_off,off_quietly} always return '0' make these functions void and while at it drop "ide_" prefix * fix comment for __ide_dma_off_quietly() * make __ide_dma_{host_off,off_quietly,off}() void and drop "__" prefix v2: * while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(), sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}() and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly() [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-02-17 02:40:26 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2) * since ide_hwif_t.ide_dma_{host_off,off_quietly} always return '0' make these functions void and while at it drop "ide_" prefix * fix comment for __ide_dma_off_quietly() * make __ide_dma_{host_off,off_quietly,off}() void and drop "__" prefix v2: * while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(), sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}() and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly() [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-02-17 02:40:26 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t * Make ide_dma_off_quietly() and __ide_dma_on() always available. * Drop "__" prefix from __ide_dma_on(). * Check for presence of ->dma_host_on instead of ->ide_dma_on. * Convert all users of ->ide_dma_on and ->dma_off_quietly methods to use ide_dma_on() and ide_dma_off_quietly() instead. * Remove no longer needed ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t. * Make ide_dma_on() void. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-01-26 20:13:01 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2) * since ide_hwif_t.ide_dma_{host_off,off_quietly} always return '0' make these functions void and while at it drop "ide_" prefix * fix comment for __ide_dma_off_quietly() * make __ide_dma_{host_off,off_quietly,off}() void and drop "__" prefix v2: * while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(), sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}() and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly() [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-02-17 02:40:26 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t * Make ide_dma_off_quietly() and __ide_dma_on() always available. * Drop "__" prefix from __ide_dma_on(). * Check for presence of ->dma_host_on instead of ->ide_dma_on. * Convert all users of ->ide_dma_on and ->dma_off_quietly methods to use ide_dma_on() and ide_dma_off_quietly() instead. * Remove no longer needed ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t. * Make ide_dma_on() void. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-01-26 20:13:01 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t * Make ide_dma_off_quietly() and __ide_dma_on() always available. * Drop "__" prefix from __ide_dma_on(). * Check for presence of ->dma_host_on instead of ->ide_dma_on. * Convert all users of ->ide_dma_on and ->dma_off_quietly methods to use ide_dma_on() and ide_dma_off_quietly() instead. * Remove no longer needed ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t. * Make ide_dma_on() void. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-01-26 20:13:01 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: add device flags Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields to IDE_DFLAG_* flags. While at it: - IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48 - fixup some comments - remove needless g->flags zeroing from ide*_probe() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:36 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: add struct ide_dma_ops (take 3) Add struct ide_dma_ops and convert core code + drivers to use it. While at it: * Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods. * Drop "ide_" "infixes" from DMA methods. * au1xxx-ide.c: - use auide_dma_{test_irq,end}() directly in auide_dma_timeout() * pdc202xx_old.c: - drop "old_" "infixes" from DMA methods * siimage.c: - add siimage_dma_test_irq() helper - print SATA warning in siimage_init_one() * Remove no longer needed ->init_hwif implementations. v2: * Changes based on review from Sergei: - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/ - s/drive->hwif/hwif/ in idefloppy_pc_intr(). - fix patch description w.r.t. au1xxx-ide changes - fix au1xxx-ide build - fix naming for cmd64*_dma_ops - drop "ide_" and "old_" infixes - s/hpt3xxx_dma_ops/hpt37x_dma_ops/ - s/hpt370x_dma_ops/hpt370_dma_ops/ - use correct DMA ops for HPT302/N, HPT371/N and HPT374 - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/ v3: * Two bugs slipped in v2 (noticed by Sergei): - use correct DMA ops for HPT374 (for real this time) - handle HPT370/HPT370A properly Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-04-26 22:25:24 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: cleanup ide-dma.c - s/HWIF(drive)/drive->hwif/ - s/HWGROUP(drive)/[drive->]hwif->hwgroup/ - fixup error messages in ide_dma_intr() & dma_timer_expiry() - fix checkpatch.pl errors/warnings Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: make drive->id an union (take 2) Make drive->id an unnamed union so id can be accessed either by using 'u16 *id' or 'struct hd_driveid *driveid'. Then convert all existing drive->id users accordingly (using 'u16 *id' when possible). This is an intermediate step to make ide 'struct hd_driveid'-free. While at it: - Add missing KERN_CONTs in it821x.c. - Use ATA_ID_WORDS and ATA_ID_*_LEN defines. - Remove unnecessary checks for drive->id. - s/drive_table/table/ in ide_in_drive_list(). - Cleanup ide_config_drive_speed() a bit. - s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave(). v2: Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell) There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-10 22:39:19 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] ide: core modifications for AU1200 bart: slightly modified by me Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2005-12-15 02:16:18 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: make drive->id an union (take 2) Make drive->id an unnamed union so id can be accessed either by using 'u16 *id' or 'struct hd_driveid *driveid'. Then convert all existing drive->id users accordingly (using 'u16 *id' when possible). This is an intermediate step to make ide 'struct hd_driveid'-free. While at it: - Add missing KERN_CONTs in it821x.c. - Use ATA_ID_WORDS and ATA_ID_*_LEN defines. - Remove unnecessary checks for drive->id. - s/drive_table/table/ in ide_in_drive_list(). - Cleanup ide_config_drive_speed() a bit. - s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave(). v2: Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell) There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-10 22:39:19 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

2007-10-11 23:53:59 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

ide: make drive->id an union (take 2) Make drive->id an unnamed union so id can be accessed either by using 'u16 *id' or 'struct hd_driveid *driveid'. Then convert all existing drive->id users accordingly (using 'u16 *id' when possible). This is an intermediate step to make ide 'struct hd_driveid'-free. While at it: - Add missing KERN_CONTs in it821x.c. - Use ATA_ID_WORDS and ATA_ID_*_LEN defines. - Remove unnecessary checks for drive->id. - s/drive_table/table/ in ide_in_drive_list(). - Cleanup ide_config_drive_speed() a bit. - s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave(). v2: Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell) There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-10 22:39:19 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

ide: add struct ide_port_ops (take 2) * Move hooks for port/host specific methods from ide_hwif_t to 'struct ide_port_ops'. * Add 'const struct ide_port_ops *port_ops' to 'struct ide_port_info' and ide_hwif_t. * Update host drivers and core code accordingly. While at it: * Rename ata66_*() cable detect functions to *_cable_detect() to match the standard naming. (Suggested by Sergei Shtylyov) v2: * Fix build for bast-ide. (Noticed by Andrew Morton) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-04-26 22:25:14 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

ide: cleanup ide-dma.c - s/HWIF(drive)/drive->hwif/ - s/HWGROUP(drive)/[drive->]hwif->hwgroup/ - fixup error messages in ide_dma_intr() & dma_timer_expiry() - fix checkpatch.pl errors/warnings Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

ide: make drive->id an union (take 2) Make drive->id an unnamed union so id can be accessed either by using 'u16 *id' or 'struct hd_driveid *driveid'. Then convert all existing drive->id users accordingly (using 'u16 *id' when possible). This is an intermediate step to make ide 'struct hd_driveid'-free. While at it: - Add missing KERN_CONTs in it821x.c. - Use ATA_ID_WORDS and ATA_ID_*_LEN defines. - Remove unnecessary checks for drive->id. - s/drive_table/table/ in ide_in_drive_list(). - Cleanup ide_config_drive_speed() a bit. - s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave(). v2: Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell) There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-10 22:39:19 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3) The IDE code assumed for years that the bit 1 of the identify data word 53 also covers the validity of the SW/MW DMA information in words 62 and 63, but it has always covered only words 64 thru 70, with words 62 and 63 being defined in the original ATA spec, not in ATA-2... This fix however should only concern *very* old hard disks and rather old CF cards... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:27 +02:00

ide: add struct ide_port_ops (take 2) * Move hooks for port/host specific methods from ide_hwif_t to 'struct ide_port_ops'. * Add 'const struct ide_port_ops *port_ops' to 'struct ide_port_info' and ide_hwif_t. * Update host drivers and core code accordingly. While at it: * Rename ata66_*() cable detect functions to *_cable_detect() to match the standard naming. (Suggested by Sergei Shtylyov) v2: * Fix build for bast-ide. (Noticed by Andrew Morton) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-04-26 22:25:14 +02:00

ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3) The IDE code assumed for years that the bit 1 of the identify data word 53 also covers the validity of the SW/MW DMA information in words 62 and 63, but it has always covered only words 64 thru 70, with words 62 and 63 being defined in the original ATA spec, not in ATA-2... This fix however should only concern *very* old hard disks and rather old CF cards... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:27 +02:00

ide: call udma_filter() before resorting to the UltraDMA mask Give the udma_filter() method call precedence over using the mode masks. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-11 23:53:59 +02:00

ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3) The IDE code assumed for years that the bit 1 of the identify data word 53 also covers the validity of the SW/MW DMA information in words 62 and 63, but it has always covered only words 64 thru 70, with words 62 and 63 being defined in the original ATA spec, not in ATA-2... This fix however should only concern *very* old hard disks and rather old CF cards... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:27 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

2007-10-11 23:53:59 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3) The IDE code assumed for years that the bit 1 of the identify data word 53 also covers the validity of the SW/MW DMA information in words 62 and 63, but it has always covered only words 64 thru 70, with words 62 and 63 being defined in the original ATA spec, not in ATA-2... This fix however should only concern *very* old hard disks and rather old CF cards... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:27 +02:00

ide: add support for CFA specified transfer modes (take 3) Add support for the CompactFlash specific PIO modes 5/6 and MWDMA modes 3/4. Since there were no PIO5 capable hard drives produced and one would also need 66 MHz IDE clock to actually get the difference WRT the address setup timings programmed, I decided to simply replace the old non-standard PIO mode 5 timings with the CFA specified ones. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: stf_xl@wp.pl Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:28 +02:00

ide: add struct ide_port_ops (take 2) * Move hooks for port/host specific methods from ide_hwif_t to 'struct ide_port_ops'. * Add 'const struct ide_port_ops *port_ops' to 'struct ide_port_info' and ide_hwif_t. * Update host drivers and core code accordingly. While at it: * Rename ata66_*() cable detect functions to *_cable_detect() to match the standard naming. (Suggested by Sergei Shtylyov) v2: * Fix build for bast-ide. (Noticed by Andrew Morton) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-04-26 22:25:14 +02:00

ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3) The IDE code assumed for years that the bit 1 of the identify data word 53 also covers the validity of the SW/MW DMA information in words 62 and 63, but it has always covered only words 64 thru 70, with words 62 and 63 being defined in the original ATA spec, not in ATA-2... This fix however should only concern *very* old hard disks and rather old CF cards... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:27 +02:00

hpt366: MWDMA filter for SATA cards (take 2) The Marvell bridge chips used on HighPoint SATA cards do not seem to support the MWDMA modes (at least that could be seen in their so-called drivers :-), so the driver needs to account for this -- to achieve this: - add mdma_filter() method from the original patch by Bartlomiej Zolnierkiewicz with his consent; - install the method for all chips to only return empty mask if a SATA drive is detected on HPT372{AN]/374 chips... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-11 23:53:58 +02:00

ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3) The IDE code assumed for years that the bit 1 of the identify data word 53 also covers the validity of the SW/MW DMA information in words 62 and 63, but it has always covered only words 64 thru 70, with words 62 and 63 being defined in the original ATA spec, not in ATA-2... This fix however should only concern *very* old hard disks and rather old CF cards... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:27 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3) The IDE code assumed for years that the bit 1 of the identify data word 53 also covers the validity of the SW/MW DMA information in words 62 and 63, but it has always covered only words 64 thru 70, with words 62 and 63 being defined in the original ATA spec, not in ATA-2... This fix however should only concern *very* old hard disks and rather old CF cards... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:27 +02:00

ide: remove drive->driveid * Factor out HDIO_[OBSOLETE,GET]_IDENTITY ioctls handling to ide_get_identity_ioctl(). * Use temporary buffer in ide_get_identity_ioctl() instead of accessing drive->id directly. * Add ide_id_to_hd_driveid() inline to convert raw id into struct hd_driveid format (needed on big-endian). * Use ide_id_to_hd_driveid() in ide_get_identity_ioctl(), cleanup ide_fix_driveid() and switch ide to use use raw id. * Remove no longer needed drive->driveid. This leaves us with 3 users of struct hd_driveid in tree: - arch/um/drivers/ubd_kern.c - drivers/block/xsysace.c - drivers/usb/storage/isd200.c While at it: * Use ata_id_u{32,64}() and ata_id_has_{dma,lba,iordy}() macros. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-10 22:39:19 +02:00

ide: fix pre-EIDE SWDMA support If the word 62 is not defined use the word 52 to get SWDMA mask in ide_get_mode_mask(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-07-09 23:17:57 +02:00

ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3) The IDE code assumed for years that the bit 1 of the identify data word 53 also covers the validity of the SW/MW DMA information in words 62 and 63, but it has always covered only words 64 thru 70, with words 62 and 63 being defined in the original ATA spec, not in ATA-2... This fix however should only concern *very* old hard disks and rather old CF cards... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:27 +02:00

ide: fix pre-EIDE SWDMA support If the word 62 is not defined use the word 52 to get SWDMA mask in ide_get_mode_mask(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-07-09 23:17:57 +02:00

ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3) The IDE code assumed for years that the bit 1 of the identify data word 53 also covers the validity of the SW/MW DMA information in words 62 and 63, but it has always covered only words 64 thru 70, with words 62 and 63 being defined in the original ATA spec, not in ATA-2... This fix however should only concern *very* old hard disks and rather old CF cards... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:27 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

2007-10-11 23:53:59 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

2007-10-11 23:53:59 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

2007-10-11 23:53:59 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

2007-10-11 23:53:59 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

ide: add IDE_HFLAG_NO_ATAPI_DMA host flag Add IDE_HFLAG_NO_ATAPI_DMA host flag and set it in host drivers which don't support ATAPI DMA. Then remove no longer needed hwif->atapi_dma. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-19 00:30:06 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

2007-10-11 23:53:59 +02:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

icside: use ide_tune_dma() * Add "good DMA drives" hack for icside to ide-dma.c::ide_find_dma_mode() (in the long-term it should be either removed or generalized for all hosts). * Use ide_tune_dma() in icside.c::icside_dma_check(). This results in the following changes in behavior: - pre-EIDE SWDMA modes are now also respected - drive->autodma is checked instead of hwif->autodma (doesn't really matter as icside sets both to "1") * Make ide-dma.c::__ide_dma_good_drive() static and drop "__" prefix. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-13 17:47:50 +02:00

ide: make drive->id an union (take 2) Make drive->id an unnamed union so id can be accessed either by using 'u16 *id' or 'struct hd_driveid *driveid'. Then convert all existing drive->id users accordingly (using 'u16 *id' when possible). This is an intermediate step to make ide 'struct hd_driveid'-free. While at it: - Add missing KERN_CONTs in it821x.c. - Use ATA_ID_WORDS and ATA_ID_*_LEN defines. - Remove unnecessary checks for drive->id. - s/drive_table/table/ in ide_in_drive_list(). - Cleanup ide_config_drive_speed() a bit. - s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave(). v2: Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell) There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-10 22:39:19 +02:00

icside: use ide_tune_dma() * Add "good DMA drives" hack for icside to ide-dma.c::ide_find_dma_mode() (in the long-term it should be either removed or generalized for all hosts). * Use ide_tune_dma() in icside.c::icside_dma_check(). This results in the following changes in behavior: - pre-EIDE SWDMA modes are now also respected - drive->autodma is checked instead of hwif->autodma (doesn't really matter as icside sets both to "1") * Make ide-dma.c::__ide_dma_good_drive() static and drop "__" prefix. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-13 17:47:50 +02:00

ide: DMA reporting and validity checking fixes (take 3) * ide_xfer_verbose() fixups: - beautify returned mode names - fix PIO5 reporting - make it return 'const char *' * Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode(). * Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid DMA info in identify block. * Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update(). As a result DMA won't be tuned or will be disabled after tuning if device reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the same checks while the IDE device is probed by ide-{cd,disk} device driver). * Remove no longer needed ide_dma_verbose(). This patch should fix the following problem with out-of-sync IDE messages reported by Nick Warne: hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<7>hdd: skipping word 93 validity check , UDMA(66) and later debugged by Mark Lord to be caused by: ide_dma_verbose() printk( ... "2048kB Cache"); eighty_ninty_three() printk(KERN_DEBUG "%s: skipping word 93 validity check\n"); ide_dma_verbose() printk(", UDMA(66)" Please note that as a result ide-{cd,disk} device drivers won't report the DMA speed used but this is intended since now DMA mode being used is always reported by IDE core code. v2: * fixes suggested by Randy: - use KERN_CONT for printk()-s in ide-{cd,disk}.c - don't remove argument name from ide_xfer_verbose() declaration v3: * Remove incorrect check for (id->field_valid & 1) from ide_id_dma_bug() (spotted by Sergei). * "XFER SLOW" -> "PIO SLOW" in ide_xfer_verbose() (suggested by Sergei). * Fix ide_find_dma_mode() to report the correct mode ('mode' after being limited by 'req_mode'). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Nick Warne <nick@ukfsn.org> Cc: Mark Lord <lkml@rtr.ca> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-12-12 23:31:58 +01:00

ide: fix ide_find_dma_mode() to print human-readable info Problem reported by Mikael. Cc: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-11-05 21:42:27 +01:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

ide: DMA reporting and validity checking fixes (take 3) * ide_xfer_verbose() fixups: - beautify returned mode names - fix PIO5 reporting - make it return 'const char *' * Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode(). * Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid DMA info in identify block. * Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update(). As a result DMA won't be tuned or will be disabled after tuning if device reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the same checks while the IDE device is probed by ide-{cd,disk} device driver). * Remove no longer needed ide_dma_verbose(). This patch should fix the following problem with out-of-sync IDE messages reported by Nick Warne: hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<7>hdd: skipping word 93 validity check , UDMA(66) and later debugged by Mark Lord to be caused by: ide_dma_verbose() printk( ... "2048kB Cache"); eighty_ninty_three() printk(KERN_DEBUG "%s: skipping word 93 validity check\n"); ide_dma_verbose() printk(", UDMA(66)" Please note that as a result ide-{cd,disk} device drivers won't report the DMA speed used but this is intended since now DMA mode being used is always reported by IDE core code. v2: * fixes suggested by Randy: - use KERN_CONT for printk()-s in ide-{cd,disk}.c - don't remove argument name from ide_xfer_verbose() declaration v3: * Remove incorrect check for (id->field_valid & 1) from ide_id_dma_bug() (spotted by Sergei). * "XFER SLOW" -> "PIO SLOW" in ide_xfer_verbose() (suggested by Sergei). * Fix ide_find_dma_mode() to report the correct mode ('mode' after being limited by 'req_mode'). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Nick Warne <nick@ukfsn.org> Cc: Mark Lord <lkml@rtr.ca> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-12-12 23:31:58 +01:00

ide: rework the code for selecting the best DMA transfer mode (v3) Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:08 +02:00

ide: remove ->ide_dma_check (take 2) * Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend on BIOS for programming device/controller for DMA. Set it in cy82c693, generic, ns87415, opti621 and trm290 host drivers. * Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520 host driver. * Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag. * Add generic ide_dma_check() helper and remove all open coded ->ide_dma_check implementations. Fix all places checking for presence of ->ide_dma_check hook to check for ->ide_dma_on instead. * Remove no longer needed code from config_drive_for_dma(). * Make ide_tune_dma() static. v2: * Fix config_drive_for_dma() return values. * Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI=n by adding dummy config_drive_for_dma() inline. * Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check(). * Fix init_hwif_it8213() comment. There should be no functionality changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-16 22:29:55 +02:00

ide: add ide_tune_dma() helper After reworking the code responsible for selecting the best DMA transfer mode it is now possible to add generic ide_tune_dma() helper. Convert some IDE PCI host drivers to use it (the ones left need more work). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:09 +02:00

cy82c693: add ->set_dma_mode method * Fix SWDMA/MWDMA masks in cy82c693_chipset. * Add IDE_HFLAG_CY82C693 host flag and use it in ide_tune_dma() to check whether the DMA should be enabled even if ide_max_dma_mode() fails. * Convert cy82c693_dma_enable() to become cy82c693_set_dma_mode() and remove no longer needed cy82c693_ide_dma_on(). Then set IDE_HFLAG_CY82C693 instead of IDE_HFLAG_TRUST_BIOS_FOR_DMA in cy82c693_chipset. * Bump driver version. As a result of this patch cy82c693 driver will configure and use DMA on all SWDMA0-2 and MWDMA0-2 capable ATA devices instead of relying on BIOS. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-01-26 20:13:00 +01:00

ide: add ide_tune_dma() helper After reworking the code responsible for selecting the best DMA transfer mode it is now possible to add generic ide_tune_dma() helper. Convert some IDE PCI host drivers to use it (the ones left need more work). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:09 +02:00

ide: add device flags Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields to IDE_DFLAG_* flags. While at it: - IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48 - fixup some comments - remove needless g->flags zeroing from ide*_probe() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:36 +02:00

ide: remove ide_use_dma() ide_use_dma() duplicates a lot of ide_max_dma_mode() functionality and as all users of ide_use_dma() were converted to use ide_tune_dma() now it is possible to add missing checks to ide_tune_dma() and remove ide_use_dma() completely, so do it. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-16 00:51:46 +02:00

ide: add ide_tune_dma() helper After reworking the code responsible for selecting the best DMA transfer mode it is now possible to add generic ide_tune_dma() helper. Convert some IDE PCI host drivers to use it (the ones left need more work). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:09 +02:00

cy82c693: add ->set_dma_mode method * Fix SWDMA/MWDMA masks in cy82c693_chipset. * Add IDE_HFLAG_CY82C693 host flag and use it in ide_tune_dma() to check whether the DMA should be enabled even if ide_max_dma_mode() fails. * Convert cy82c693_dma_enable() to become cy82c693_set_dma_mode() and remove no longer needed cy82c693_ide_dma_on(). Then set IDE_HFLAG_CY82C693 instead of IDE_HFLAG_TRUST_BIOS_FOR_DMA in cy82c693_chipset. * Bump driver version. As a result of this patch cy82c693 driver will configure and use DMA on all SWDMA0-2 and MWDMA0-2 capable ATA devices instead of relying on BIOS. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-01-26 20:13:00 +01:00

ide: remove ->ide_dma_check (take 2) * Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend on BIOS for programming device/controller for DMA. Set it in cy82c693, generic, ns87415, opti621 and trm290 host drivers. * Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520 host driver. * Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag. * Add generic ide_dma_check() helper and remove all open coded ->ide_dma_check implementations. Fix all places checking for presence of ->ide_dma_check hook to check for ->ide_dma_on instead. * Remove no longer needed code from config_drive_for_dma(). * Make ide_tune_dma() static. v2: * Fix config_drive_for_dma() return values. * Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI=n by adding dummy config_drive_for_dma() inline. * Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check(). * Fix init_hwif_it8213() comment. There should be no functionality changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-16 22:29:55 +02:00

ide: add ide_tune_dma() helper After reworking the code responsible for selecting the best DMA transfer mode it is now possible to add generic ide_tune_dma() helper. Convert some IDE PCI host drivers to use it (the ones left need more work). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:09 +02:00

ide: remove IDE_HFLAG_CY82C693 host flag Sergei suggested that it shouldn't be necessary + it had no effect anyway since ide_id_dma_bug() is called earlier in ide_tune_dma(). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-04-26 17:36:38 +02:00

ide: add ide_tune_dma() helper After reworking the code responsible for selecting the best DMA transfer mode it is now possible to add generic ide_tune_dma() helper. Convert some IDE PCI host drivers to use it (the ones left need more work). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:09 +02:00

ide: move ide_config_drive_speed() calls to upper layers (take 2) * Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16. * Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program the host for the transfer mode after programming the device. Set it in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac and via82cxxx host drivers. * Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely skip programming of host/device for the transfer mode ("smart" hosts). Set it in it821x host driver and check it in ide_tune_dma(). * Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all direct ->set_pio_mode/->speedproc users to use these helpers. * Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc methods to callers. * Rename ->speedproc method to ->set_dma_mode, make it void and update all implementations accordingly. * Update ide_set_xfer_rate() comments. * Unexport ide_config_drive_speed(). v2: * Fix issues noticed by Sergei: - export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt to setting DMA modes from sc1200_set_pio_mode() to do_special() - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma() - check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode() - check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode() - return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL - don't set ->set_{pio,dma}_mode on it821x in "smart" mode - fix build problem in pmac.c - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c - improve patch description Changes in behavior caused by this patch: - HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change PIO mode if it821x controller is in "smart" mode - removal of two debugging printk-s (from cs5530.c and sc1200.c) - transfer modes 0x00-0x07 passed from user space may be programmed twice on the device (not really an issue since 0x00 is not supported correctly by any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-13 17:47:51 +02:00

ide: remove ide_dma_enable() * check ->speedproc return value in ide_tune_dma() * use ide_tune_dma() in cmd64x/cs5530/sc1200/siimage/sl82c105/scc_pata drivers * remove no longer needed ide_dma_enable() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-16 00:51:46 +02:00

ide: add ide_tune_dma() helper After reworking the code responsible for selecting the best DMA transfer mode it is now possible to add generic ide_tune_dma() helper. Convert some IDE PCI host drivers to use it (the ones left need more work). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:09 +02:00

ide: remove ide_dma_enable() * check ->speedproc return value in ide_tune_dma() * use ide_tune_dma() in cmd64x/cs5530/sc1200/siimage/sl82c105/scc_pata drivers * remove no longer needed ide_dma_enable() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-16 00:51:46 +02:00

ide: add ide_tune_dma() helper After reworking the code responsible for selecting the best DMA transfer mode it is now possible to add generic ide_tune_dma() helper. Convert some IDE PCI host drivers to use it (the ones left need more work). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-05-10 00:01:09 +02:00

ide: remove ->ide_dma_check (take 2) * Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend on BIOS for programming device/controller for DMA. Set it in cy82c693, generic, ns87415, opti621 and trm290 host drivers. * Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520 host driver. * Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag. * Add generic ide_dma_check() helper and remove all open coded ->ide_dma_check implementations. Fix all places checking for presence of ->ide_dma_check hook to check for ->ide_dma_on instead. * Remove no longer needed code from config_drive_for_dma(). * Make ide_tune_dma() static. v2: * Fix config_drive_for_dma() return values. * Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI=n by adding dummy config_drive_for_dma() inline. * Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check(). * Fix init_hwif_it8213() comment. There should be no functionality changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-16 22:29:55 +02:00

ide: remove dead Virtual DMA support Lets remove dead Virtual DMA support for now so it doesn't clutter core IDE code (it can be bring back when there is a need for it): * Remove IDE_HFLAG_VDMA host flag. * Remove ide_drive_t.vdma flag. * cs5520.c: remove stale FIXMEs, cs5520_dma_host_set() and cs5520_dma_ops (also there is no longer a need to set IDE_HFLAG_NO_ATAPI_DMA). There should be no functional changes caused by this patch. Cc: TAKADA Yoshihito <takada@mbf.nifty.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-07-23 19:55:55 +02:00

ide: remove ->ide_dma_check (take 2) * Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend on BIOS for programming device/controller for DMA. Set it in cy82c693, generic, ns87415, opti621 and trm290 host drivers. * Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520 host driver. * Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag. * Add generic ide_dma_check() helper and remove all open coded ->ide_dma_check implementations. Fix all places checking for presence of ->ide_dma_check hook to check for ->ide_dma_on instead. * Remove no longer needed code from config_drive_for_dma(). * Make ide_tune_dma() static. v2: * Fix config_drive_for_dma() return values. * Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI=n by adding dummy config_drive_for_dma() inline. * Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check(). * Fix init_hwif_it8213() comment. There should be no functionality changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-16 22:29:55 +02:00

ide: remove dead Virtual DMA support Lets remove dead Virtual DMA support for now so it doesn't clutter core IDE code (it can be bring back when there is a need for it): * Remove IDE_HFLAG_VDMA host flag. * Remove ide_drive_t.vdma flag. * cs5520.c: remove stale FIXMEs, cs5520_dma_host_set() and cs5520_dma_ops (also there is no longer a need to set IDE_HFLAG_NO_ATAPI_DMA). There should be no functional changes caused by this patch. Cc: TAKADA Yoshihito <takada@mbf.nifty.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-07-23 19:55:55 +02:00

ide: remove ->ide_dma_check (take 2) * Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend on BIOS for programming device/controller for DMA. Set it in cy82c693, generic, ns87415, opti621 and trm290 host drivers. * Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520 host driver. * Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag. * Add generic ide_dma_check() helper and remove all open coded ->ide_dma_check implementations. Fix all places checking for presence of ->ide_dma_check hook to check for ->ide_dma_on instead. * Remove no longer needed code from config_drive_for_dma(). * Make ide_tune_dma() static. v2: * Fix config_drive_for_dma() return values. * Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI=n by adding dummy config_drive_for_dma() inline. * Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check(). * Fix init_hwif_it8213() comment. There should be no functionality changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-16 22:29:55 +02:00

ide: add ide_set_dma() helper (v2) * add ide_set_dma() helper and make ide_hwif_t.ide_dma_check return -1 when DMA needs to be disabled (== need to call ->ide_dma_off_quietly) 0 when DMA needs to be enabled (== need to call ->ide_dma_on) 1 when DMA setting shouldn't be changed * fix IDE code to use ide_set_dma() instead if using ->ide_dma_check directly v2: * updated for scc_pata Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-02-17 02:40:26 +01:00

ide: cleanup ide_set_dma() * ->dma_off_quietly is always called before ide_set_dma() so the call can be moved inside ide_set_dma(). * ide_dma_check() doesn't touch hardware so ->dma_off_quietly call for 'rc == -1' case is redundant, remove it. * '0' and '-1' are the only values returned by ide_dma_check() so remove dead code for other cases. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-01-25 22:17:19 +01:00

ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t * Make ide_dma_off_quietly() and __ide_dma_on() always available. * Drop "__" prefix from __ide_dma_on(). * Check for presence of ->dma_host_on instead of ->ide_dma_on. * Convert all users of ->ide_dma_on and ->dma_off_quietly methods to use ide_dma_on() and ide_dma_off_quietly() instead. * Remove no longer needed ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t. * Make ide_dma_on() void. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-01-26 20:13:01 +01:00

ide: cleanup ide_set_dma() * ->dma_off_quietly is always called before ide_set_dma() so the call can be moved inside ide_set_dma(). * ide_dma_check() doesn't touch hardware so ->dma_off_quietly call for 'rc == -1' case is redundant, remove it. * '0' and '-1' are the only values returned by ide_dma_check() so remove dead code for other cases. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-01-25 22:17:19 +01:00

ide: remove ->ide_dma_check (take 2) * Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend on BIOS for programming device/controller for DMA. Set it in cy82c693, generic, ns87415, opti621 and trm290 host drivers. * Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520 host driver. * Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag. * Add generic ide_dma_check() helper and remove all open coded ->ide_dma_check implementations. Fix all places checking for presence of ->ide_dma_check hook to check for ->ide_dma_on instead. * Remove no longer needed code from config_drive_for_dma(). * Make ide_tune_dma() static. v2: * Fix config_drive_for_dma() return values. * Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI=n by adding dummy config_drive_for_dma() inline. * Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check(). * Fix init_hwif_it8213() comment. There should be no functionality changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-10-16 22:29:55 +02:00

ide: cleanup ide_set_dma() * ->dma_off_quietly is always called before ide_set_dma() so the call can be moved inside ide_set_dma(). * ide_dma_check() doesn't touch hardware so ->dma_off_quietly call for 'rc == -1' case is redundant, remove it. * '0' and '-1' are the only values returned by ide_dma_check() so remove dead code for other cases. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-01-25 22:17:19 +01:00

ide: add ide_set_dma() helper (v2) * add ide_set_dma() helper and make ide_hwif_t.ide_dma_check return -1 when DMA needs to be disabled (== need to call ->ide_dma_off_quietly) 0 when DMA needs to be enabled (== need to call ->ide_dma_on) 1 when DMA setting shouldn't be changed * fix IDE code to use ide_set_dma() instead if using ->ide_dma_check directly v2: * updated for scc_pata Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-02-17 02:40:26 +01:00

ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t * Make ide_dma_off_quietly() and __ide_dma_on() always available. * Drop "__" prefix from __ide_dma_on(). * Check for presence of ->dma_host_on instead of ->ide_dma_on. * Convert all users of ->ide_dma_on and ->dma_off_quietly methods to use ide_dma_on() and ide_dma_off_quietly() instead. * Remove no longer needed ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t. * Make ide_dma_on() void. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-01-26 20:13:01 +01:00

ide: add ide_set_dma() helper (v2) * add ide_set_dma() helper and make ide_hwif_t.ide_dma_check return -1 when DMA needs to be disabled (== need to call ->ide_dma_off_quietly) 0 when DMA needs to be enabled (== need to call ->ide_dma_on) 1 when DMA setting shouldn't be changed * fix IDE code to use ide_set_dma() instead if using ->ide_dma_check directly v2: * updated for scc_pata Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2007-02-17 02:40:26 +01:00

ide: move check_dma_crc() to ide-dma.c * Move check_dma_crc() to ide-dma.c and add inline version for CONFIG_BLK_DEV_IDEDMA=n case. * Rename check_dma_crc() to ide_check_dma_crc(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-02 19:56:47 +01:00

ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n Make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n and convert {ics,au1xxx-}ide.c to use it. While at it: - use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:46 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n Make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n and convert {ics,au1xxx-}ide.c to use it. While at it: - use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:46 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n Make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n and convert {ics,au1xxx-}ide.c to use it. While at it: - use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:46 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: move ide_dma_timeout_retry() to ide-dma.c Move ide_dma_timeout_retry() to ide-dma.c and add static inline version for CONFIG_BLK_DEV_IDEDMA=n. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-24 23:22:43 +01:00

ide: add ->dma_clear method and remove ->dma_timeout one All custom ->dma_timeout implementations call the generic one thus it is possible to have only an optional method for resetting DMA engine instead: * Add ->dma_clear method and convert hpt366, pdc202xx_old and sl82c105 host drivers to use it. * Always use ide_dma_timeout() in ide_dma_timeout_retry() and remove ->dma_timeout method. * Make ide_dma_timeout() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:19 +02:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

ide: move ide_dma_timeout_retry() to ide-dma.c Move ide_dma_timeout_retry() to ide-dma.c and add static inline version for CONFIG_BLK_DEV_IDEDMA=n. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-24 23:22:43 +01:00

ide: set/clear drive->waiting_for_dma flag in the core code Set/clear drive->waiting_for_dma flag in the core code instead of in ->dma_setup and ->dma_end methods. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:22 +02:00

ide: add ->dma_clear method and remove ->dma_timeout one All custom ->dma_timeout implementations call the generic one thus it is possible to have only an optional method for resetting DMA engine instead: * Add ->dma_clear method and convert hpt366, pdc202xx_old and sl82c105 host drivers to use it. * Always use ide_dma_timeout() in ide_dma_timeout_retry() and remove ->dma_timeout method. * Make ide_dma_timeout() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:19 +02:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

ide: move ide_dma_timeout_retry() to ide-dma.c Move ide_dma_timeout_retry() to ide-dma.c and add static inline version for CONFIG_BLK_DEV_IDEDMA=n. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-24 23:22:43 +01:00

ide: add ->dma_clear method and remove ->dma_timeout one All custom ->dma_timeout implementations call the generic one thus it is possible to have only an optional method for resetting DMA engine instead: * Add ->dma_clear method and convert hpt366, pdc202xx_old and sl82c105 host drivers to use it. * Always use ide_dma_timeout() in ide_dma_timeout_retry() and remove ->dma_timeout method. * Make ide_dma_timeout() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:19 +02:00

ide: inline ide_dma_timeout() into ide_dma_timeout_retry() Since ide_dma_timeout() is only used by ide_dma_timeout_retry() inline it there. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:19 +02:00

ide: set/clear drive->waiting_for_dma flag in the core code Set/clear drive->waiting_for_dma flag in the core code instead of in ->dma_setup and ->dma_end methods. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:22 +02:00

ide: inline ide_dma_timeout() into ide_dma_timeout_retry() Since ide_dma_timeout() is only used by ide_dma_timeout_retry() inline it there. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:19 +02:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

ide: inline ide_dma_timeout() into ide_dma_timeout_retry() Since ide_dma_timeout() is only used by ide_dma_timeout_retry() inline it there. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:19 +02:00

ide: move ide_dma_timeout_retry() to ide-dma.c Move ide_dma_timeout_retry() to ide-dma.c and add static inline version for CONFIG_BLK_DEV_IDEDMA=n. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-24 23:22:43 +01:00

ide: clean up timed out request handling 8f6205cd572fece673da0255d74843680f67f879 introduced a bug where a timed out DMA request is never requeued and lost. 6072f7491f5ef391a575e18a1165e72a3eef1601 fixed this by making ide_dma_timeout_retry() requeue the request itself. While the fix is correct, it makes DMA and non-DMA paths asymmetric regarding how the in flight request is requeued. As long as hwif->rq is set, the IDE driver is assuming ownership of the request and the request should either be completed or requeued when clearing hwif->rq. In the timeout path, the ide driver holds onto the request as long as the recovery action (ie. reset) is in progress and clears it after the state machine is stopped (ide_stopped return), so the existing requeueing logic is correct. The bug occurred because ide_dma_timeout_retry() explicitly clears hwif->rq without requeueing it. ide_dma_timeout_retry() is called only by ide_timer_expiry() and returns ide_started only when ide_error() would return it - ie. after reset state machine has started in which case the state machine will eventually end up executing the ide_stopped path in ide_timer_expiry() after reset protocol is complete. So, there is no need to clear hwif->rq from ide_dma_timeout_retry(). ide_timer_expiry() will handle it the same way as PIO timeout path. Kill hwif->rq clearing and requeueing from ide_dma_timeout_retry() and let ide_timer_expiry() deal with it. The end result should remain the same. grepping shows ide_dma_timeout_retry() is the only site which clears hwif->rq without taking care of the request, so there shouldn't be similar fallouts. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-04-08 01:45:46 -07:00

ide: move ide_dma_timeout_retry() to ide-dma.c Move ide_dma_timeout_retry() to ide-dma.c and add static inline version for CONFIG_BLK_DEV_IDEDMA=n. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-24 23:22:43 +01:00

ide: clean up timed out request handling 8f6205cd572fece673da0255d74843680f67f879 introduced a bug where a timed out DMA request is never requeued and lost. 6072f7491f5ef391a575e18a1165e72a3eef1601 fixed this by making ide_dma_timeout_retry() requeue the request itself. While the fix is correct, it makes DMA and non-DMA paths asymmetric regarding how the in flight request is requeued. As long as hwif->rq is set, the IDE driver is assuming ownership of the request and the request should either be completed or requeued when clearing hwif->rq. In the timeout path, the ide driver holds onto the request as long as the recovery action (ie. reset) is in progress and clears it after the state machine is stopped (ide_stopped return), so the existing requeueing logic is correct. The bug occurred because ide_dma_timeout_retry() explicitly clears hwif->rq without requeueing it. ide_dma_timeout_retry() is called only by ide_timer_expiry() and returns ide_started only when ide_error() would return it - ie. after reset state machine has started in which case the state machine will eventually end up executing the ide_stopped path in ide_timer_expiry() after reset protocol is complete. So, there is no need to clear hwif->rq from ide_dma_timeout_retry(). ide_timer_expiry() will handle it the same way as PIO timeout path. Kill hwif->rq clearing and requeueing from ide_dma_timeout_retry() and let ide_timer_expiry() deal with it. The end result should remain the same. grepping shows ide_dma_timeout_retry() is the only site which clears hwif->rq without taking care of the request, so there shouldn't be similar fallouts. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-04-08 01:45:46 -07:00

ide: move ide_dma_timeout_retry() to ide-dma.c Move ide_dma_timeout_retry() to ide-dma.c and add static inline version for CONFIG_BLK_DEV_IDEDMA=n. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-24 23:22:43 +01:00

ide: manage resources for PCI devices in ide_pci_enable() (take 3) * Reserve PCI BARs 0-3 (0-1 for single port controllers) in ide_pci_enable() and remove ide_hwif_request_regions() call from ide_device_add_all() (also cleanup resource management in scc_pata host driver). * Fix handling of PCI BAR 4 in ide_pci_enable(), then cleanup ide_iomio_dma() (+ init_hwif_trm290() in trm290 host driver) and remove ide_release[_iomio]_dma(). v2: * Fixup trm290 host driver. v3: * Because of scc_pata host driver changes we need to call pci_request_selected_regions() also in setup_mmio_scc(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-04-26 22:25:19 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: switch to DMA-mapping API part #2 Follow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf ("ide: switch to DMA-mapping API"): * pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent() in ide_{allocate,release}_dma_engine(). * Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t (+ set default values in ide_allocate_dma_engine()). * Make ide_{allocate,release}_dma_engine() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n. Then convert au1xxx-ide.c, scc_pata.c and sgiioc4.c to use them. * Add missing ->init_dma method to scc_pata. This patch also fixes: - ->dmatable_cpu leak for au1xxx-ide - too early realease of ->dmatable_cpu for scc_pata - wrong amount of ->dmatable_cpu memory being freed for sgiioc4 While at it: - remove superfluous ->dma_base check from ide_unregister() - return -ENOMEM on error in ide_release_dma_engine() - beautify error message in ide_release_dma_engine() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_t Keep pointer to struct device instead of struct pci_dev in ide_hwif_t. While on it: * Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-01 23:09:31 +01:00

ide: switch to DMA-mapping API part #2 Follow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf ("ide: switch to DMA-mapping API"): * pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent() in ide_{allocate,release}_dma_engine(). * Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t (+ set default values in ide_allocate_dma_engine()). * Make ide_{allocate,release}_dma_engine() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n. Then convert au1xxx-ide.c, scc_pata.c and sgiioc4.c to use them. * Add missing ->init_dma method to scc_pata. This patch also fixes: - ->dmatable_cpu leak for au1xxx-ide - too early realease of ->dmatable_cpu for scc_pata - wrong amount of ->dmatable_cpu memory being freed for sgiioc4 While at it: - remove superfluous ->dma_base check from ide_unregister() - return -ENOMEM on error in ide_release_dma_engine() - beautify error message in ide_release_dma_engine() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: switch to DMA-mapping API part #2 Follow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf ("ide: switch to DMA-mapping API"): * pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent() in ide_{allocate,release}_dma_engine(). * Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t (+ set default values in ide_allocate_dma_engine()). * Make ide_{allocate,release}_dma_engine() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n. Then convert au1xxx-ide.c, scc_pata.c and sgiioc4.c to use them. * Add missing ->init_dma method to scc_pata. This patch also fixes: - ->dmatable_cpu leak for au1xxx-ide - too early realease of ->dmatable_cpu for scc_pata - wrong amount of ->dmatable_cpu memory being freed for sgiioc4 While at it: - remove superfluous ->dma_base check from ide_unregister() - return -ENOMEM on error in ide_release_dma_engine() - beautify error message in ide_release_dma_engine() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: export ide_allocate_dma_engine() Export ide_allocate_dma_engine() and use it in trm290 host driver. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-04-26 22:25:21 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: switch to DMA-mapping API part #2 Follow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf ("ide: switch to DMA-mapping API"): * pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent() in ide_{allocate,release}_dma_engine(). * Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t (+ set default values in ide_allocate_dma_engine()). * Make ide_{allocate,release}_dma_engine() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n. Then convert au1xxx-ide.c, scc_pata.c and sgiioc4.c to use them. * Add missing ->init_dma method to scc_pata. This patch also fixes: - ->dmatable_cpu leak for au1xxx-ide - too early realease of ->dmatable_cpu for scc_pata - wrong amount of ->dmatable_cpu memory being freed for sgiioc4 While at it: - remove superfluous ->dma_base check from ide_unregister() - return -ENOMEM on error in ide_release_dma_engine() - beautify error message in ide_release_dma_engine() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_t Keep pointer to struct device instead of struct pci_dev in ide_hwif_t. While on it: * Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-01 23:09:31 +01:00

ide: switch to DMA-mapping API part #2 Follow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf ("ide: switch to DMA-mapping API"): * pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent() in ide_{allocate,release}_dma_engine(). * Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t (+ set default values in ide_allocate_dma_engine()). * Make ide_{allocate,release}_dma_engine() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n. Then convert au1xxx-ide.c, scc_pata.c and sgiioc4.c to use them. * Add missing ->init_dma method to scc_pata. This patch also fixes: - ->dmatable_cpu leak for au1xxx-ide - too early realease of ->dmatable_cpu for scc_pata - wrong amount of ->dmatable_cpu memory being freed for sgiioc4 While at it: - remove superfluous ->dma_base check from ide_unregister() - return -ENOMEM on error in ide_release_dma_engine() - beautify error message in ide_release_dma_engine() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: switch to DMA-mapping API part #2 Follow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf ("ide: switch to DMA-mapping API"): * pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent() in ide_{allocate,release}_dma_engine(). * Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t (+ set default values in ide_allocate_dma_engine()). * Make ide_{allocate,release}_dma_engine() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n. Then convert au1xxx-ide.c, scc_pata.c and sgiioc4.c to use them. * Add missing ->init_dma method to scc_pata. This patch also fixes: - ->dmatable_cpu leak for au1xxx-ide - too early realease of ->dmatable_cpu for scc_pata - wrong amount of ->dmatable_cpu memory being freed for sgiioc4 While at it: - remove superfluous ->dma_base check from ide_unregister() - return -ENOMEM on error in ide_release_dma_engine() - beautify error message in ide_release_dma_engine() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: switch to DMA-mapping API part #2 Follow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf ("ide: switch to DMA-mapping API"): * pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent() in ide_{allocate,release}_dma_engine(). * Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t (+ set default values in ide_allocate_dma_engine()). * Make ide_{allocate,release}_dma_engine() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n. Then convert au1xxx-ide.c, scc_pata.c and sgiioc4.c to use them. * Add missing ->init_dma method to scc_pata. This patch also fixes: - ->dmatable_cpu leak for au1xxx-ide - too early realease of ->dmatable_cpu for scc_pata - wrong amount of ->dmatable_cpu memory being freed for sgiioc4 While at it: - remove superfluous ->dma_base check from ide_unregister() - return -ENOMEM on error in ide_release_dma_engine() - beautify error message in ide_release_dma_engine() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

ide: remove ->cds field from ide_hwif_t (take 2) * Use hwif->name instead of cds->name in ide_allocate_dma_engine(). * Use pci_name(dev) instead of cds->name in init_dma_pdc202xx(). * Remove no longer needed ->cds field from ide_hwif_t. v2: * scc_pata.c also needs to be updated now (noticed by Stephen Rothwell). There should be no functional changes caused by this patch. Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-04-26 22:25:20 +02:00

ide: switch to DMA-mapping API part #2 Follow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf ("ide: switch to DMA-mapping API"): * pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent() in ide_{allocate,release}_dma_engine(). * Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t (+ set default values in ide_allocate_dma_engine()). * Make ide_{allocate,release}_dma_engine() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n. Then convert au1xxx-ide.c, scc_pata.c and sgiioc4.c to use them. * Add missing ->init_dma method to scc_pata. This patch also fixes: - ->dmatable_cpu leak for au1xxx-ide - too early realease of ->dmatable_cpu for scc_pata - wrong amount of ->dmatable_cpu memory being freed for sgiioc4 While at it: - remove superfluous ->dma_base check from ide_unregister() - return -ENOMEM on error in ide_release_dma_engine() - beautify error message in ide_release_dma_engine() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: switch to DMA-mapping API part #2 Follow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf ("ide: switch to DMA-mapping API"): * pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent() in ide_{allocate,release}_dma_engine(). * Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t (+ set default values in ide_allocate_dma_engine()). * Make ide_{allocate,release}_dma_engine() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n. Then convert au1xxx-ide.c, scc_pata.c and sgiioc4.c to use them. * Add missing ->init_dma method to scc_pata. This patch also fixes: - ->dmatable_cpu leak for au1xxx-ide - too early realease of ->dmatable_cpu for scc_pata - wrong amount of ->dmatable_cpu memory being freed for sgiioc4 While at it: - remove superfluous ->dma_base check from ide_unregister() - return -ENOMEM on error in ide_release_dma_engine() - beautify error message in ide_release_dma_engine() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-10-13 21:39:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ide: export ide_allocate_dma_engine() Export ide_allocate_dma_engine() and use it in trm290 host driver. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-04-26 22:25:21 +02:00

ide: add ide_dma_prepare() helper * Add ide_dma_prepare() helper. * Convert ide_issue_pc() and do_rw_taskfile() to use it. * Make ide_build_sglist() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:20 +02:00

ide: add ->dma_check method * Add (an optional) ->dma_check method for checking if DMA can be used for a given command and fail DMA setup in ide_dma_prepare() if necessary. * Convert alim15x3 and trm290 host drivers to use ->dma_check. * Rename ali15x3_dma_setup() to ali_dma_check() while at it. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:21 +02:00

ide: add ide_dma_prepare() helper * Add ide_dma_prepare() helper. * Convert ide_issue_pc() and do_rw_taskfile() to use it. * Make ide_build_sglist() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:20 +02:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

ide: set/clear drive->waiting_for_dma flag in the core code Set/clear drive->waiting_for_dma flag in the core code instead of in ->dma_setup and ->dma_end methods. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:22 +02:00

ide: add ide_dma_prepare() helper * Add ide_dma_prepare() helper. * Convert ide_issue_pc() and do_rw_taskfile() to use it. * Make ide_build_sglist() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:20 +02:00

ide: sanitize ide_build_sglist() and ide_destroy_dmatable() * Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:24 +02:00

ide: add ide_dma_prepare() helper * Add ide_dma_prepare() helper. * Convert ide_issue_pc() and do_rw_taskfile() to use it. * Make ide_build_sglist() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2009-03-31 20:15:20 +02:00

553 lines 13 KiB Raw Normal View History

553 lines

13 KiB

Raw Normal View History