linux

regulator: helper routine to extract regulator_init_data The helper routine is meant to be used by the regulator drivers to extract the regulator_init_data structure from the data that is passed from device tree. 'consumer_supplies' which is part of regulator_init_data is not extracted as the regulator consumer mappings are passed through DT differently, implemented in subsequent patches. Similarly the regulator<-->parent/supply mapping is handled in subsequent patches. Also add documentation for regulator bindings to be used to pass regulator_init_data struct information from device tree. Some of the regulator properties which are linux and board specific, are left out since its not clear if they can be in someway embedded into the kernel or passed in from DT. They will be revisited later. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-11-18 16:47:17 +05:30

regulator: export of_get_regulator_init_data of_get_regulator_init_data is called in drivers/regulator/fixed.c which could be a module. Export of_get_regulator_init_data to fix below build error: ERROR: "of_get_regulator_init_data" [drivers/regulator/fixed.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-11-26 18:50:58 +08:00

regulator: helper routine to extract regulator_init_data The helper routine is meant to be used by the regulator drivers to extract the regulator_init_data structure from the data that is passed from device tree. 'consumer_supplies' which is part of regulator_init_data is not extracted as the regulator consumer mappings are passed through DT differently, implemented in subsequent patches. Similarly the regulator<-->parent/supply mapping is handled in subsequent patches. Also add documentation for regulator bindings to be used to pass regulator_init_data struct information from device tree. Some of the regulator properties which are linux and board specific, are left out since its not clear if they can be in someway embedded into the kernel or passed in from DT. They will be revisited later. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-11-18 16:47:17 +05:30

regulator: Add generic DT parsing for regulators Looking up init data for regulators found on chips is a common operation that can be handled in a generic way. The new helper function introduced by this patch looks up the children of a given node by names specified in a match table and fills that match table with information parsed from the DT. This is based on work by Rhyland Klein <rklein@nvidia.com>. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-04-26 16:52:20 +02:00

regulator: helper routine to extract regulator_init_data The helper routine is meant to be used by the regulator drivers to extract the regulator_init_data structure from the data that is passed from device tree. 'consumer_supplies' which is part of regulator_init_data is not extracted as the regulator consumer mappings are passed through DT differently, implemented in subsequent patches. Similarly the regulator<-->parent/supply mapping is handled in subsequent patches. Also add documentation for regulator bindings to be used to pass regulator_init_data struct information from device tree. Some of the regulator properties which are linux and board specific, are left out since its not clear if they can be in someway embedded into the kernel or passed in from DT. They will be revisited later. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-11-18 16:47:17 +05:30

regulator: Add ramp_delay configuration to constraints For some hardwares ramp_delay for BUCKs is a configurable parameter which can be configured through DT or board file.This patch adds ramp_delay to regulator constraints and allow user to configure it for regulators which supports this feature, through DT or board file. It will provide two ways of setting the ramp_delay for a regulator: First, by setting it as constraints in board file(for configurable regulators) and set_machine_constraints() will take care of setting it on hardware by calling(the provided) .set_ramp_delay() operation(callback). Second, by setting it as data in regulator_desc(as fixed/default ramp_delay rate) for a regulator in driver. regulator_set_voltage_time_sel() will give preference to constraints->ramp_delay while reading ramp_delay rate for regulator. Similarly users should also take care accordingly while refering ramp_delay rate(in case of implementing their private .set_voltage_time_sel() callbacks for different regulators). [Rewrote subject for 80 columns -- broonie] Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-06-11 17:41:08 +05:30

regulator: helper routine to extract regulator_init_data The helper routine is meant to be used by the regulator drivers to extract the regulator_init_data structure from the data that is passed from device tree. 'consumer_supplies' which is part of regulator_init_data is not extracted as the regulator consumer mappings are passed through DT differently, implemented in subsequent patches. Similarly the regulator<-->parent/supply mapping is handled in subsequent patches. Also add documentation for regulator bindings to be used to pass regulator_init_data struct information from device tree. Some of the regulator properties which are linux and board specific, are left out since its not clear if they can be in someway embedded into the kernel or passed in from DT. They will be revisited later. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-11-18 16:47:17 +05:30

regulator: If a single voltage is set with device tree then set apply_uV Otherwise there is no way in the bindings to configure a fixed voltage via software. It seems reasonable to assume that if the binding explicitly specifies a voltage we want to actually use that voltage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-12-05 10:58:41 +00:00

regulator: Set apply_uV only when min and max voltages are defined apply_uV is errornously set when regulator is instantiated from device tree, even when it doesn't contain any voltage constraints. This commit fixes error: machine_constraints_voltage: CHARGER: failed to apply 0uV constraint for following regulator description in DTS: CHARGER { regulator-min-microamp = <100000>; regulator-max-microamp = <200000>; } Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-01-25 10:31:45 +01:00

regulator: If a single voltage is set with device tree then set apply_uV Otherwise there is no way in the bindings to configure a fixed voltage via software. It seems reasonable to assume that if the binding explicitly specifies a voltage we want to actually use that voltage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-12-05 10:58:41 +00:00

regulator: helper routine to extract regulator_init_data The helper routine is meant to be used by the regulator drivers to extract the regulator_init_data structure from the data that is passed from device tree. 'consumer_supplies' which is part of regulator_init_data is not extracted as the regulator consumer mappings are passed through DT differently, implemented in subsequent patches. Similarly the regulator<-->parent/supply mapping is handled in subsequent patches. Also add documentation for regulator bindings to be used to pass regulator_init_data struct information from device tree. Some of the regulator properties which are linux and board specific, are left out since its not clear if they can be in someway embedded into the kernel or passed in from DT. They will be revisited later. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-11-18 16:47:17 +05:30

regulator: Add ramp_delay configuration to constraints For some hardwares ramp_delay for BUCKs is a configurable parameter which can be configured through DT or board file.This patch adds ramp_delay to regulator constraints and allow user to configure it for regulators which supports this feature, through DT or board file. It will provide two ways of setting the ramp_delay for a regulator: First, by setting it as constraints in board file(for configurable regulators) and set_machine_constraints() will take care of setting it on hardware by calling(the provided) .set_ramp_delay() operation(callback). Second, by setting it as data in regulator_desc(as fixed/default ramp_delay rate) for a regulator in driver. regulator_set_voltage_time_sel() will give preference to constraints->ramp_delay while reading ramp_delay rate for regulator. Similarly users should also take care accordingly while refering ramp_delay rate(in case of implementing their private .set_voltage_time_sel() callbacks for different regulators). [Rewrote subject for 80 columns -- broonie] Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-06-11 17:41:08 +05:30

regulator: Fix setting constraints->ramp_delay in of_get_regulation_constraints Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-06-18 13:59:02 +08:00

regulator: helper routine to extract regulator_init_data The helper routine is meant to be used by the regulator drivers to extract the regulator_init_data structure from the data that is passed from device tree. 'consumer_supplies' which is part of regulator_init_data is not extracted as the regulator consumer mappings are passed through DT differently, implemented in subsequent patches. Similarly the regulator<-->parent/supply mapping is handled in subsequent patches. Also add documentation for regulator bindings to be used to pass regulator_init_data struct information from device tree. Some of the regulator properties which are linux and board specific, are left out since its not clear if they can be in someway embedded into the kernel or passed in from DT. They will be revisited later. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-11-18 16:47:17 +05:30

regulator: pass device_node to of_get_regulator_init_data() It's not always true that the device_node of regulator can be found at dev->of_node at the time when of_get_regulator_init_data() is being called, because in some cases the regulator nodes in device tree do not have 'struct device' behind them until regulator_dev gets created for it by core function regulator_register(). The patch adds device_node as a new parameter to of_get_regulator_init_data(), so that caller can pass in the node of regulator directly. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-12-01 17:21:06 +08:00

regulator: helper routine to extract regulator_init_data The helper routine is meant to be used by the regulator drivers to extract the regulator_init_data structure from the data that is passed from device tree. 'consumer_supplies' which is part of regulator_init_data is not extracted as the regulator consumer mappings are passed through DT differently, implemented in subsequent patches. Similarly the regulator<-->parent/supply mapping is handled in subsequent patches. Also add documentation for regulator bindings to be used to pass regulator_init_data struct information from device tree. Some of the regulator properties which are linux and board specific, are left out since its not clear if they can be in someway embedded into the kernel or passed in from DT. They will be revisited later. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-11-18 16:47:17 +05:30

regulator: pass device_node to of_get_regulator_init_data() It's not always true that the device_node of regulator can be found at dev->of_node at the time when of_get_regulator_init_data() is being called, because in some cases the regulator nodes in device tree do not have 'struct device' behind them until regulator_dev gets created for it by core function regulator_register(). The patch adds device_node as a new parameter to of_get_regulator_init_data(), so that caller can pass in the node of regulator directly. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-12-01 17:21:06 +08:00

regulator: helper routine to extract regulator_init_data The helper routine is meant to be used by the regulator drivers to extract the regulator_init_data structure from the data that is passed from device tree. 'consumer_supplies' which is part of regulator_init_data is not extracted as the regulator consumer mappings are passed through DT differently, implemented in subsequent patches. Similarly the regulator<-->parent/supply mapping is handled in subsequent patches. Also add documentation for regulator bindings to be used to pass regulator_init_data struct information from device tree. Some of the regulator properties which are linux and board specific, are left out since its not clear if they can be in someway embedded into the kernel or passed in from DT. They will be revisited later. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-11-18 16:47:17 +05:30

regulator: pass device_node to of_get_regulator_init_data() It's not always true that the device_node of regulator can be found at dev->of_node at the time when of_get_regulator_init_data() is being called, because in some cases the regulator nodes in device tree do not have 'struct device' behind them until regulator_dev gets created for it by core function regulator_register(). The patch adds device_node as a new parameter to of_get_regulator_init_data(), so that caller can pass in the node of regulator directly. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-12-01 17:21:06 +08:00

regulator: helper routine to extract regulator_init_data The helper routine is meant to be used by the regulator drivers to extract the regulator_init_data structure from the data that is passed from device tree. 'consumer_supplies' which is part of regulator_init_data is not extracted as the regulator consumer mappings are passed through DT differently, implemented in subsequent patches. Similarly the regulator<-->parent/supply mapping is handled in subsequent patches. Also add documentation for regulator bindings to be used to pass regulator_init_data struct information from device tree. Some of the regulator properties which are linux and board specific, are left out since its not clear if they can be in someway embedded into the kernel or passed in from DT. They will be revisited later. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-11-18 16:47:17 +05:30

regulator: export of_get_regulator_init_data of_get_regulator_init_data is called in drivers/regulator/fixed.c which could be a module. Export of_get_regulator_init_data to fix below build error: ERROR: "of_get_regulator_init_data" [drivers/regulator/fixed.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2011-11-26 18:50:58 +08:00

regulator: Add generic DT parsing for regulators Looking up init data for regulators found on chips is a common operation that can be handled in a generic way. The new helper function introduced by this patch looks up the children of a given node by names specified in a match table and fills that match table with information parsed from the DT. This is based on work by Rhyland Klein <rklein@nvidia.com>. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-04-26 16:52:20 +02:00

regulator: deprecate regulator-compatible DT property When the bindings for the TPS6586x regulator were being proposed, I asserted that DT node naming rules for bus child nodes should also be applied to nodes inside the TPS6586x regulator node itself. In other words, that each node providing regulator init data should be named after the type of object it represented ("regulator") and hence that some other property was required to indicate which regulator the node described ("regulator-compatible"). In turn this led to multiple nodes having the same name, thus requiring node names to use a unit address to make them unique, thus requiring reg properties within the nodes and However, subsequent discussion indicates that the rules I was asserting only applies to standardized bus nodes, and within a device's own node, the binding can basically do anything sane that it wants. Hence, this change deprecates the register-compatible property, and instead uses node names to replace this functionality. This greatly simplifies the device tree content, making them smaller and more legible. The code is changed such that old device trees continue to work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-09-24 13:25:00 -06:00

regulator: Add generic DT parsing for regulators Looking up init data for regulators found on chips is a common operation that can be handled in a generic way. The new helper function introduced by this patch looks up the children of a given node by names specified in a match table and fills that match table with information parsed from the DT. This is based on work by Rhyland Klein <rklein@nvidia.com>. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-04-26 16:52:20 +02:00

regulator: deprecate regulator-compatible DT property When the bindings for the TPS6586x regulator were being proposed, I asserted that DT node naming rules for bus child nodes should also be applied to nodes inside the TPS6586x regulator node itself. In other words, that each node providing regulator init data should be named after the type of object it represented ("regulator") and hence that some other property was required to indicate which regulator the node described ("regulator-compatible"). In turn this led to multiple nodes having the same name, thus requiring node names to use a unit address to make them unique, thus requiring reg properties within the nodes and However, subsequent discussion indicates that the rules I was asserting only applies to standardized bus nodes, and within a device's own node, the binding can basically do anything sane that it wants. Hence, this change deprecates the register-compatible property, and instead uses node names to replace this functionality. This greatly simplifies the device tree content, making them smaller and more legible. The code is changed such that old device trees continue to work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-09-24 13:25:00 -06:00

regulator: dt: regulator match by regulator-compatible Match the device's regulators with the property of "regulator-compatible" of each regulator node. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-06-20 17:53:06 +05:30

regulator: Add generic DT parsing for regulators Looking up init data for regulators found on chips is a common operation that can be handled in a generic way. The new helper function introduced by this patch looks up the children of a given node by names specified in a match table and fills that match table with information parsed from the DT. This is based on work by Rhyland Klein <rklein@nvidia.com>. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-04-26 16:52:20 +02:00

regulator: deprecate regulator-compatible DT property When the bindings for the TPS6586x regulator were being proposed, I asserted that DT node naming rules for bus child nodes should also be applied to nodes inside the TPS6586x regulator node itself. In other words, that each node providing regulator init data should be named after the type of object it represented ("regulator") and hence that some other property was required to indicate which regulator the node described ("regulator-compatible"). In turn this led to multiple nodes having the same name, thus requiring node names to use a unit address to make them unique, thus requiring reg properties within the nodes and However, subsequent discussion indicates that the rules I was asserting only applies to standardized bus nodes, and within a device's own node, the binding can basically do anything sane that it wants. Hence, this change deprecates the register-compatible property, and instead uses node names to replace this functionality. This greatly simplifies the device tree content, making them smaller and more legible. The code is changed such that old device trees continue to work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-09-24 13:25:00 -06:00

regulator: dt: regulator match by regulator-compatible Match the device's regulators with the property of "regulator-compatible" of each regulator node. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-06-20 17:53:06 +05:30

regulator: Add generic DT parsing for regulators Looking up init data for regulators found on chips is a common operation that can be handled in a generic way. The new helper function introduced by this patch looks up the children of a given node by names specified in a match table and fills that match table with information parsed from the DT. This is based on work by Rhyland Klein <rklein@nvidia.com>. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-04-26 16:52:20 +02:00

regulator: clear state each invocation of of_regulator_match of_regulator_match() saves some dynamcially allocated state into the match table that's passed to it. By implementation and not contract, for each match table entry, if non-NULL state is already present, of_regulator_match() will not overwrite it. of_regulator_match() is typically called each time a regulator is probe()d. This means it is called with the same match table over and over again if a regulator triggers deferred probe. This results in stale, kfree()d data being left in the match table from probe to probe, which causes a variety of crashes or use of invalid data. Explicitly free all output state from of_regulator_match() before generating new results in order to avoid this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org

2013-01-29 12:01:13 -07:00

regulator: dt: regulator match by regulator-compatible Match the device's regulators with the property of "regulator-compatible" of each regulator node. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-06-20 17:53:06 +05:30

regulator: deprecate regulator-compatible DT property When the bindings for the TPS6586x regulator were being proposed, I asserted that DT node naming rules for bus child nodes should also be applied to nodes inside the TPS6586x regulator node itself. In other words, that each node providing regulator init data should be named after the type of object it represented ("regulator") and hence that some other property was required to indicate which regulator the node described ("regulator-compatible"). In turn this led to multiple nodes having the same name, thus requiring node names to use a unit address to make them unique, thus requiring reg properties within the nodes and However, subsequent discussion indicates that the rules I was asserting only applies to standardized bus nodes, and within a device's own node, the binding can basically do anything sane that it wants. Hence, this change deprecates the register-compatible property, and instead uses node names to replace this functionality. This greatly simplifies the device tree content, making them smaller and more legible. The code is changed such that old device trees continue to work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-09-24 13:25:00 -06:00

regulator: dt: regulator match by regulator-compatible Match the device's regulators with the property of "regulator-compatible" of each regulator node. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-06-20 17:53:06 +05:30

regulator: deprecate regulator-compatible DT property When the bindings for the TPS6586x regulator were being proposed, I asserted that DT node naming rules for bus child nodes should also be applied to nodes inside the TPS6586x regulator node itself. In other words, that each node providing regulator init data should be named after the type of object it represented ("regulator") and hence that some other property was required to indicate which regulator the node described ("regulator-compatible"). In turn this led to multiple nodes having the same name, thus requiring node names to use a unit address to make them unique, thus requiring reg properties within the nodes and However, subsequent discussion indicates that the rules I was asserting only applies to standardized bus nodes, and within a device's own node, the binding can basically do anything sane that it wants. Hence, this change deprecates the register-compatible property, and instead uses node names to replace this functionality. This greatly simplifies the device tree content, making them smaller and more legible. The code is changed such that old device trees continue to work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-09-24 13:25:00 -06:00

regulator: dt: regulator match by regulator-compatible Match the device's regulators with the property of "regulator-compatible" of each regulator node. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-06-20 17:53:06 +05:30

regulator: Add generic DT parsing for regulators Looking up init data for regulators found on chips is a common operation that can be handled in a generic way. The new helper function introduced by this patch looks up the children of a given node by names specified in a match table and fills that match table with information parsed from the DT. This is based on work by Rhyland Klein <rklein@nvidia.com>. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-04-26 16:52:20 +02:00

regulator: deprecate regulator-compatible DT property When the bindings for the TPS6586x regulator were being proposed, I asserted that DT node naming rules for bus child nodes should also be applied to nodes inside the TPS6586x regulator node itself. In other words, that each node providing regulator init data should be named after the type of object it represented ("regulator") and hence that some other property was required to indicate which regulator the node described ("regulator-compatible"). In turn this led to multiple nodes having the same name, thus requiring node names to use a unit address to make them unique, thus requiring reg properties within the nodes and However, subsequent discussion indicates that the rules I was asserting only applies to standardized bus nodes, and within a device's own node, the binding can basically do anything sane that it wants. Hence, this change deprecates the register-compatible property, and instead uses node names to replace this functionality. This greatly simplifies the device tree content, making them smaller and more legible. The code is changed such that old device trees continue to work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-09-24 13:25:00 -06:00

regulator: dt: regulator match by regulator-compatible Match the device's regulators with the property of "regulator-compatible" of each regulator node. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-06-20 17:53:06 +05:30

regulator: Add generic DT parsing for regulators Looking up init data for regulators found on chips is a common operation that can be handled in a generic way. The new helper function introduced by this patch looks up the children of a given node by names specified in a match table and fills that match table with information parsed from the DT. This is based on work by Rhyland Klein <rklein@nvidia.com>. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

2012-04-26 16:52:20 +02:00

158 lines 4.8 KiB Raw Normal View History

158 lines

4.8 KiB

Raw Normal View History