linux

usb: Bind devices to ACPI devices when possible Built-in USB devices will typically have a representation in the system ACPI tables. Add support for binding the two together so the USB code can make use of the associated methods. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:27 +08:00

usb/acpi: Use ACPI methods to power off ports. Upcoming Intel systems will have an ACPI method to control whether a USB port can be completely powered off. The implication of powering off a USB port is that the device and host sees a physical disconnect, and subsequent port connections and remote wakeups will be lost. Add a new function, usb_acpi_power_manageable(), that can be used to find whether the usb port has ACPI power resources that can be used to power on and off the port on these machines. Also add a new function called usb_acpi_set_power_state() that controls the port power via these ACPI methods. When the USB core calls into the xHCI hub driver to power off a port, check whether the port can be completely powered off via this new ACPI mechanism. If so, call into these new ACPI methods. Also use the ACPI methods when the USB core asks to power on a port. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:36 +08:00

usb/acpi: Store info on device removability. In the upcoming USB port power off patches, we need to know whether a USB port can ever see a disconnect event. Often USB ports are internal to a system, and users can't disconnect USB devices from that port. Sometimes those ports will remain empty, because the OEM chose not to connect an internal USB device to that port. According to ACPI Spec 9.13, PLD indicates whether USB port is user visible and _UPC indicates whether a USB device can be connected to the USB port (we'll call this "connectible"). Here's a matrix of the possible combinations: Visible Connectible Name Example ------------------------------------------------------------------------- Yes No Unknown (Invalid state.) Yes Yes Hot-plug USB ports on the outside of a laptop. A user could freely connect and disconnect USB devices. No Yes Hard-wired A USB modem hard-wired to a port on the inside of a laptop. No No Not used The port is internal to the system and will remain empty. Represent each of these four states with an enum usb_port_connect_type. The four states are USB_PORT_CONNECT_TYPE_UNKNOWN, USB_PORT_CONNECT_TYPE_HOT_PLUG, USB_PORT_CONNECT_TYPE_HARD_WIRED, and USB_PORT_NOT_USED. When we get the USB port's acpi_handle, store the state in connect_type in struct usb_port. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:34 +08:00

usb: Set device removable state based on ACPI USB data ACPI offers two methods that allow us to infer whether or not a USB port is removable. The _PLD method gives us information on whether the port is "user visible" or not. If that's not present then we can fall back to the _UPC method which tells us whether or not a port is connectable. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:28 +08:00

2012-10-08 07:14:06 +09:00

usb: Set device removable state based on ACPI USB data ACPI offers two methods that allow us to infer whether or not a USB port is removable. The _PLD method gives us information on whether the port is "user visible" or not. If that's not present then we can fall back to the _UPC method which tells us whether or not a port is connectable. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:28 +08:00

usb/acpi: Store info on device removability. In the upcoming USB port power off patches, we need to know whether a USB port can ever see a disconnect event. Often USB ports are internal to a system, and users can't disconnect USB devices from that port. Sometimes those ports will remain empty, because the OEM chose not to connect an internal USB device to that port. According to ACPI Spec 9.13, PLD indicates whether USB port is user visible and _UPC indicates whether a USB device can be connected to the USB port (we'll call this "connectible"). Here's a matrix of the possible combinations: Visible Connectible Name Example ------------------------------------------------------------------------- Yes No Unknown (Invalid state.) Yes Yes Hot-plug USB ports on the outside of a laptop. A user could freely connect and disconnect USB devices. No Yes Hard-wired A USB modem hard-wired to a port on the inside of a laptop. No No Not used The port is internal to the system and will remain empty. Represent each of these four states with an enum usb_port_connect_type. The four states are USB_PORT_CONNECT_TYPE_UNKNOWN, USB_PORT_CONNECT_TYPE_HOT_PLUG, USB_PORT_CONNECT_TYPE_HARD_WIRED, and USB_PORT_NOT_USED. When we get the USB port's acpi_handle, store the state in connect_type in struct usb_port. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:34 +08:00

usb: Set device removable state based on ACPI USB data ACPI offers two methods that allow us to infer whether or not a USB port is removable. The _PLD method gives us information on whether the port is "user visible" or not. If that's not present then we can fall back to the _UPC method which tells us whether or not a port is connectable. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:28 +08:00

usb/acpi: Store info on device removability. In the upcoming USB port power off patches, we need to know whether a USB port can ever see a disconnect event. Often USB ports are internal to a system, and users can't disconnect USB devices from that port. Sometimes those ports will remain empty, because the OEM chose not to connect an internal USB device to that port. According to ACPI Spec 9.13, PLD indicates whether USB port is user visible and _UPC indicates whether a USB device can be connected to the USB port (we'll call this "connectible"). Here's a matrix of the possible combinations: Visible Connectible Name Example ------------------------------------------------------------------------- Yes No Unknown (Invalid state.) Yes Yes Hot-plug USB ports on the outside of a laptop. A user could freely connect and disconnect USB devices. No Yes Hard-wired A USB modem hard-wired to a port on the inside of a laptop. No No Not used The port is internal to the system and will remain empty. Represent each of these four states with an enum usb_port_connect_type. The four states are USB_PORT_CONNECT_TYPE_UNKNOWN, USB_PORT_CONNECT_TYPE_HOT_PLUG, USB_PORT_CONNECT_TYPE_HARD_WIRED, and USB_PORT_NOT_USED. When we get the USB port's acpi_handle, store the state in connect_type in struct usb_port. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:34 +08:00

usb: Set device removable state based on ACPI USB data ACPI offers two methods that allow us to infer whether or not a USB port is removable. The _PLD method gives us information on whether the port is "user visible" or not. If that's not present then we can fall back to the _UPC method which tells us whether or not a port is connectable. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:28 +08:00

2012-10-08 07:14:06 +09:00

usb/acpi: Store info on device removability. In the upcoming USB port power off patches, we need to know whether a USB port can ever see a disconnect event. Often USB ports are internal to a system, and users can't disconnect USB devices from that port. Sometimes those ports will remain empty, because the OEM chose not to connect an internal USB device to that port. According to ACPI Spec 9.13, PLD indicates whether USB port is user visible and _UPC indicates whether a USB device can be connected to the USB port (we'll call this "connectible"). Here's a matrix of the possible combinations: Visible Connectible Name Example ------------------------------------------------------------------------- Yes No Unknown (Invalid state.) Yes Yes Hot-plug USB ports on the outside of a laptop. A user could freely connect and disconnect USB devices. No Yes Hard-wired A USB modem hard-wired to a port on the inside of a laptop. No No Not used The port is internal to the system and will remain empty. Represent each of these four states with an enum usb_port_connect_type. The four states are USB_PORT_CONNECT_TYPE_UNKNOWN, USB_PORT_CONNECT_TYPE_HOT_PLUG, USB_PORT_CONNECT_TYPE_HARD_WIRED, and USB_PORT_NOT_USED. When we get the USB port's acpi_handle, store the state in connect_type in struct usb_port. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:34 +08:00

2012-10-08 07:14:06 +09:00

usb/acpi: Store info on device removability. In the upcoming USB port power off patches, we need to know whether a USB port can ever see a disconnect event. Often USB ports are internal to a system, and users can't disconnect USB devices from that port. Sometimes those ports will remain empty, because the OEM chose not to connect an internal USB device to that port. According to ACPI Spec 9.13, PLD indicates whether USB port is user visible and _UPC indicates whether a USB device can be connected to the USB port (we'll call this "connectible"). Here's a matrix of the possible combinations: Visible Connectible Name Example ------------------------------------------------------------------------- Yes No Unknown (Invalid state.) Yes Yes Hot-plug USB ports on the outside of a laptop. A user could freely connect and disconnect USB devices. No Yes Hard-wired A USB modem hard-wired to a port on the inside of a laptop. No No Not used The port is internal to the system and will remain empty. Represent each of these four states with an enum usb_port_connect_type. The four states are USB_PORT_CONNECT_TYPE_UNKNOWN, USB_PORT_CONNECT_TYPE_HOT_PLUG, USB_PORT_CONNECT_TYPE_HARD_WIRED, and USB_PORT_NOT_USED. When we get the USB port's acpi_handle, store the state in connect_type in struct usb_port. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:34 +08:00

usb: Set device removable state based on ACPI USB data ACPI offers two methods that allow us to infer whether or not a USB port is removable. The _PLD method gives us information on whether the port is "user visible" or not. If that's not present then we can fall back to the _UPC method which tells us whether or not a port is connectable. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:28 +08:00

2012-10-08 07:14:06 +09:00

usb: Set device removable state based on ACPI USB data ACPI offers two methods that allow us to infer whether or not a USB port is removable. The _PLD method gives us information on whether the port is "user visible" or not. If that's not present then we can fall back to the _UPC method which tells us whether or not a port is connectable. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:28 +08:00

usb: Bind devices to ACPI devices when possible Built-in USB devices will typically have a representation in the system ACPI tables. Add support for binding the two together so the USB code can make use of the associated methods. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:27 +08:00

usb/acpi: Bind ACPI node to USB port, not usb_device. In the ACPI DSDT table, only usb root hub and usb ports are ACPI device nodes. Originally, we bound the usb port's ACPI node to the usb device attached to the port. However, we want to access those ACPI port methods when the port is empty, and there's no usb_device associated with that port. Now that the usb port is a real device, we can bind the port's ACPI node to struct usb_port instead. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:33 +08:00

usb: Bind devices to ACPI devices when possible Built-in USB devices will typically have a representation in the system ACPI tables. Add support for binding the two together so the USB code can make use of the associated methods. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:27 +08:00

usb/acpi: Bind ACPI node to USB port, not usb_device. In the ACPI DSDT table, only usb root hub and usb ports are ACPI device nodes. Originally, we bound the usb port's ACPI node to the usb device attached to the port. However, we want to access those ACPI port methods when the port is empty, and there's no usb_device associated with that port. Now that the usb port is a real device, we can bind the port's ACPI node to struct usb_port instead. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:33 +08:00

usb/acpi: Store info on device removability. In the upcoming USB port power off patches, we need to know whether a USB port can ever see a disconnect event. Often USB ports are internal to a system, and users can't disconnect USB devices from that port. Sometimes those ports will remain empty, because the OEM chose not to connect an internal USB device to that port. According to ACPI Spec 9.13, PLD indicates whether USB port is user visible and _UPC indicates whether a USB device can be connected to the USB port (we'll call this "connectible"). Here's a matrix of the possible combinations: Visible Connectible Name Example ------------------------------------------------------------------------- Yes No Unknown (Invalid state.) Yes Yes Hot-plug USB ports on the outside of a laptop. A user could freely connect and disconnect USB devices. No Yes Hard-wired A USB modem hard-wired to a port on the inside of a laptop. No No Not used The port is internal to the system and will remain empty. Represent each of these four states with an enum usb_port_connect_type. The four states are USB_PORT_CONNECT_TYPE_UNKNOWN, USB_PORT_CONNECT_TYPE_HOT_PLUG, USB_PORT_CONNECT_TYPE_HARD_WIRED, and USB_PORT_NOT_USED. When we get the USB port's acpi_handle, store the state in connect_type in struct usb_port. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:34 +08:00

usb/acpi: Bind ACPI node to USB port, not usb_device. In the ACPI DSDT table, only usb root hub and usb ports are ACPI device nodes. Originally, we bound the usb port's ACPI node to the usb device attached to the port. However, we want to access those ACPI port methods when the port is empty, and there's no usb_device associated with that port. Now that the usb port is a real device, we can bind the port's ACPI node to struct usb_port instead. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:33 +08:00

usb/acpi: Store info on device removability. In the upcoming USB port power off patches, we need to know whether a USB port can ever see a disconnect event. Often USB ports are internal to a system, and users can't disconnect USB devices from that port. Sometimes those ports will remain empty, because the OEM chose not to connect an internal USB device to that port. According to ACPI Spec 9.13, PLD indicates whether USB port is user visible and _UPC indicates whether a USB device can be connected to the USB port (we'll call this "connectible"). Here's a matrix of the possible combinations: Visible Connectible Name Example ------------------------------------------------------------------------- Yes No Unknown (Invalid state.) Yes Yes Hot-plug USB ports on the outside of a laptop. A user could freely connect and disconnect USB devices. No Yes Hard-wired A USB modem hard-wired to a port on the inside of a laptop. No No Not used The port is internal to the system and will remain empty. Represent each of these four states with an enum usb_port_connect_type. The four states are USB_PORT_CONNECT_TYPE_UNKNOWN, USB_PORT_CONNECT_TYPE_HOT_PLUG, USB_PORT_CONNECT_TYPE_HARD_WIRED, and USB_PORT_NOT_USED. When we get the USB port's acpi_handle, store the state in connect_type in struct usb_port. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:34 +08:00

usb/acpi: Bind ACPI node to USB port, not usb_device. In the ACPI DSDT table, only usb root hub and usb ports are ACPI device nodes. Originally, we bound the usb port's ACPI node to the usb device attached to the port. However, we want to access those ACPI port methods when the port is empty, and there's no usb_device associated with that port. Now that the usb port is a real device, we can bind the port's ACPI node to struct usb_port instead. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:33 +08:00

usb: Bind devices to ACPI devices when possible Built-in USB devices will typically have a representation in the system ACPI tables. Add support for binding the two together so the USB code can make use of the associated methods. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:27 +08:00

usb/acpi: Bind ACPI node to USB port, not usb_device. In the ACPI DSDT table, only usb root hub and usb ports are ACPI device nodes. Originally, we bound the usb port's ACPI node to the usb device attached to the port. However, we want to access those ACPI port methods when the port is empty, and there's no usb_device associated with that port. Now that the usb port is a real device, we can bind the port's ACPI node to struct usb_port instead. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:33 +08:00

usb: Bind devices to ACPI devices when possible Built-in USB devices will typically have a representation in the system ACPI tables. Add support for binding the two together so the USB code can make use of the associated methods. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:27 +08:00

usb/acpi: Bind ACPI node to USB port, not usb_device. In the ACPI DSDT table, only usb root hub and usb ports are ACPI device nodes. Originally, we bound the usb port's ACPI node to the usb device attached to the port. However, we want to access those ACPI port methods when the port is empty, and there's no usb_device associated with that port. Now that the usb port is a real device, we can bind the port's ACPI node to struct usb_port instead. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:33 +08:00

usb/acpi: Store info on device removability. In the upcoming USB port power off patches, we need to know whether a USB port can ever see a disconnect event. Often USB ports are internal to a system, and users can't disconnect USB devices from that port. Sometimes those ports will remain empty, because the OEM chose not to connect an internal USB device to that port. According to ACPI Spec 9.13, PLD indicates whether USB port is user visible and _UPC indicates whether a USB device can be connected to the USB port (we'll call this "connectible"). Here's a matrix of the possible combinations: Visible Connectible Name Example ------------------------------------------------------------------------- Yes No Unknown (Invalid state.) Yes Yes Hot-plug USB ports on the outside of a laptop. A user could freely connect and disconnect USB devices. No Yes Hard-wired A USB modem hard-wired to a port on the inside of a laptop. No No Not used The port is internal to the system and will remain empty. Represent each of these four states with an enum usb_port_connect_type. The four states are USB_PORT_CONNECT_TYPE_UNKNOWN, USB_PORT_CONNECT_TYPE_HOT_PLUG, USB_PORT_CONNECT_TYPE_HARD_WIRED, and USB_PORT_NOT_USED. When we get the USB port's acpi_handle, store the state in connect_type in struct usb_port. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:34 +08:00

usb/acpi: Bind ACPI node to USB port, not usb_device. In the ACPI DSDT table, only usb root hub and usb ports are ACPI device nodes. Originally, we bound the usb port's ACPI node to the usb device attached to the port. However, we want to access those ACPI port methods when the port is empty, and there's no usb_device associated with that port. Now that the usb port is a real device, we can bind the port's ACPI node to struct usb_port instead. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:33 +08:00

usb: Bind devices to ACPI devices when possible Built-in USB devices will typically have a representation in the system ACPI tables. Add support for binding the two together so the USB code can make use of the associated methods. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:27 +08:00

usb/acpi: Bind ACPI node to USB port, not usb_device. In the ACPI DSDT table, only usb root hub and usb ports are ACPI device nodes. Originally, we bound the usb port's ACPI node to the usb device attached to the port. However, we want to access those ACPI port methods when the port is empty, and there's no usb_device associated with that port. Now that the usb port is a real device, we can bind the port's ACPI node to struct usb_port instead. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-09-05 13:44:33 +08:00

usb: Bind devices to ACPI devices when possible Built-in USB devices will typically have a representation in the system ACPI tables. Add support for binding the two together so the USB code can make use of the associated methods. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-05-11 16:08:27 +08:00

227 lines 5.7 KiB Raw Normal View History

227 lines

5.7 KiB

Raw Normal View History