kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/fs/gfs2/log.c

831 lines
22 KiB
Raw Normal View History

[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Journal extent mapping This patch saves a little time when gfs2 writes to the journals by keeping a mapping between logical and physical blocks on disk. That's better than constantly looking up indirect pointers in buffers, when the journals are several levels of indirection (which they typically are). Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-12-11 18:49:21 -06:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Update copyright, tidy up incore.h As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this updates the copyright message to say "version" in full rather than "v.2". Also incore.h has been updated to remove forward structure declarations which are not required. The gfs2_quota_lvb structure has now had endianess annotations added to it. Also quota.c has been updated so that we now store the lvb data locally in endian independant format to avoid needing a structure in host endianess too. As a result the endianess conversions are done as required at various points and thus the conversion routines in lvb.[ch] are no longer required. I've moved the one remaining constant in lvb.h thats used into lm.h and removed the unused lvb.[ch]. I have not changed the HIF_ constants. That is left to a later patch which I hope will unify the gh_flags and gh_iflags fields of the struct gfs2_holder. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01 11:05:15 -04:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Macros removal in gfs2.h As suggested by Pekka Enberg <penberg@cs.helsinki.fi>. The DIV_RU macro is renamed DIV_ROUND_UP and and moved to kernel.h The other macros are gone from gfs2.h as (although not requested by Pekka Enberg) are a number of included header file which are now included individually. The inode number comparison function is now an inline function. The DT2IF and IF2DT may be addressed in a future patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-27 17:23:27 -05:00
[GFS2] Further updates to dir and logging code This reduces the size of the directory code by about 3k and gets readdir() to use the functions which were introduced in the previous directory code update. Two memory allocations are merged into one. Eliminates zeroing of some buffers which were never used before they were initialised by other data. There is still scope for further improvement in the directory code. On the logging side, a hand created mutex has been replaced by a standard Linux mutex in the log allocation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-28 14:14:04 -05:00
[GFS2] Move gfs2_meta_syncfs() into log.c By moving gfs2_meta_syncfs() into log.c, gfs2_ail1_start() can be made static. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-23 11:06:35 -05:00
[GFS2] Move gfs2_logd into log.c This means that we can mark gfs2_ail1_empty static and prepares the way for further changes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-11-09 10:01:41 +00:00
GFS2: Support for I/O barriers This patch adds barrier support to GFS2. There is not a lot of change really... we just add the barrier flag when we write journal header blocks. If the underlying device refuses to support them, we fall back to the previous way of doing things (wait for the I/O and hope) since there is nothing else we can do. There is no user configuration, barriers will always be on unless the device refuses to support them. This seems a reasonable solution to me since this is a correctness issue. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-09-26 10:23:22 +01:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
GFS2: Sort the ordered write list This patch sorts the ordered write list for GFS2 writes. This increases the throughput for simultaneous writes. For example, if you have ten processes, all doing: dd if=/dev/zero of=/mnt/gfs2/fileX on different files, the throughput will be much better. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-14 14:49:57 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Macros removal in gfs2.h As suggested by Pekka Enberg <penberg@cs.helsinki.fi>. The DIV_RU macro is renamed DIV_ROUND_UP and and moved to kernel.h The other macros are gone from gfs2.h as (although not requested by Pekka Enberg) are a number of included header file which are now included individually. The inode number comparison function is now an inline function. The DT2IF and IF2DT may be addressed in a future patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-27 17:23:27 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Macros removal in gfs2.h As suggested by Pekka Enberg <penberg@cs.helsinki.fi>. The DIV_RU macro is renamed DIV_ROUND_UP and and moved to kernel.h The other macros are gone from gfs2.h as (although not requested by Pekka Enberg) are a number of included header file which are now included individually. The inode number comparison function is now an inline function. The DT2IF and IF2DT may be addressed in a future patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-27 17:23:27 -05:00
[GFS2] Further updates to dir and logging code This reduces the size of the directory code by about 3k and gets readdir() to use the functions which were introduced in the previous directory code update. Two memory allocations are merged into one. Eliminates zeroing of some buffers which were never used before they were initialised by other data. There is still scope for further improvement in the directory code. On the logging side, a hand created mutex has been replaced by a standard Linux mutex in the log allocation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-28 14:14:04 -05:00
GFS2: Add tracepoints This patch adds the ability to trace various aspects of the GFS2 filesystem. The trace points are divided into three groups, glocks, logging and bmap. These points have been chosen because they allow inspection of the major internal functions of GFS2 and they are also generic enough that they are unlikely to need any major changes as the filesystem evolves. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-06-12 08:49:20 +01:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Tidy up log.c Based upon previous feedback from lkml and also removing some commented out debugging which is no longer needed. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-13 11:13:27 -04:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] 80 Column audit of GFS2 Requested by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-27 12:00:42 -05:00
[GFS2] Macros removal in gfs2.h As suggested by Pekka Enberg <penberg@cs.helsinki.fi>. The DIV_RU macro is renamed DIV_ROUND_UP and and moved to kernel.h The other macros are gone from gfs2.h as (although not requested by Pekka Enberg) are a number of included header file which are now included individually. The inode number comparison function is now an inline function. The DT2IF and IF2DT may be addressed in a future patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-27 17:23:27 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Introduce gfs2_remove_from_ail This collects together the operations required to remove a gfs2_bufdata from the ail lists. Its only called from two places to start with, but expect to see more of this function in future. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-27 09:45:26 +01:00
GFS2: Update to AIL list locking The previous patch missed a couple of places where the AIL list needed locking, so this fixes up those places, plus a comment is corrected too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Chinner <dchinner@redhat.com>
2011-03-14 12:40:29 +00:00
[GFS2] Introduce gfs2_remove_from_ail This collects together the operations required to remove a gfs2_bufdata from the ail lists. Its only called from two places to start with, but expect to see more of this function in future. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-27 09:45:26 +01:00
[GFS2] Remove useless i_cache from inodes The i_cache was designed to keep references to the indirect blocks used during block mapping so that they didn't have to be looked up continually. The idea failed because there are too many places where the i_cache needs to be freed, and this has in the past been the cause of many bugs. In addition there was no performance benefit being gained since the disk blocks in question were cached anyway. So this patch removes it in order to simplify the code to prepare for other changes which would otherwise have had to add further support for this feature. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-15 16:29:05 +01:00
[GFS2] Introduce gfs2_remove_from_ail This collects together the operations required to remove a gfs2_bufdata from the ail lists. Its only called from two places to start with, but expect to see more of this function in future. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-27 09:45:26 +01:00
[GFS2] Clean up gfs2_trans_add_revoke() The following alters gfs2_trans_add_revoke() to take a struct gfs2_bufdata as an argument. This eliminates the memory allocation which was previously required by making use of the already existing struct gfs2_bufdata. It makes some sanity checks to ensure that the gfs2_bufdata has been removed from all the lists before its recycled as a revoke structure. This saves one memory allocation and one free per revoke structure. Also as a result, and to simplify the locking, since there is no longer any blocking code in gfs2_trans_add_revoke() we must hold the log lock whenever this function is called. This reduces the amount of times we take and unlock the log lock. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-03 11:01:33 +01:00
[GFS2] Introduce gfs2_remove_from_ail This collects together the operations required to remove a gfs2_bufdata from the ail lists. Its only called from two places to start with, but expect to see more of this function in future. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-27 09:45:26 +01:00
[GFS2] Move logging code into log.c (mostly) This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03 11:10:41 -04:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] Move logging code into log.c (mostly) This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03 11:10:41 -04:00
GFS2: Fix ail list traversal In the recent patches to update the AIL list code, I managed to forget that the ail list lock got dropped, even though I added a comment specifically to remind myself :( Reported-by: Barry Marson <bmarson@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-26 10:23:56 +01:00
GFS2: introduce AIL lock The log lock is currently used to protect the AIL lists and the movements of buffers into and out of them. The lists are self contained and no log specific items outside the lists are accessed when starting or emptying the AIL lists. Hence the operation of the AIL does not require the protection of the log lock so split them out into a new AIL specific lock to reduce the amount of traffic on the log lock. This will also reduce the amount of serialisation that occurs when the gfs2_logd pushes on the AIL to move it forward. This reduces the impact of log pushing on sequential write throughput. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11 11:52:25 +00:00
[GFS2] Move logging code into log.c (mostly) This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03 11:10:41 -04:00
GFS2: Use filemap_fdatawrite() to write back the AIL In order to ensure that the mapping stats (and thus the bdi) are correctly updated, this patch changes the AIL writeback to use the filemap_datawrite function. This helps prevent stalls in balance_dirty_pages() due to large amounts of dirty metadata when there is little or no dirty data around. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-30 16:25:51 +01:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] Move logging code into log.c (mostly) This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03 11:10:41 -04:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] Move logging code into log.c (mostly) This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03 11:10:41 -04:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] Move logging code into log.c (mostly) This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03 11:10:41 -04:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] Move logging code into log.c (mostly) This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03 11:10:41 -04:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
GFS2: Fix ail list traversal In the recent patches to update the AIL list code, I managed to forget that the ail list lock got dropped, even though I added a comment specifically to remind myself :( Reported-by: Barry Marson <bmarson@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-26 10:23:56 +01:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
GFS2: Fix ail list traversal In the recent patches to update the AIL list code, I managed to forget that the ail list lock got dropped, even though I added a comment specifically to remind myself :( Reported-by: Barry Marson <bmarson@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-26 10:23:56 +01:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
GFS2: Fix ail list traversal In the recent patches to update the AIL list code, I managed to forget that the ail list lock got dropped, even though I added a comment specifically to remind myself :( Reported-by: Barry Marson <bmarson@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-26 10:23:56 +01:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
GFS2: Add an AIL writeback tracepoint Add a tracepoint for monitoring writeback of the AIL. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:38 +01:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
GFS2: Fix ail list traversal In the recent patches to update the AIL list code, I managed to forget that the ail list lock got dropped, even though I added a comment specifically to remind myself :( Reported-by: Barry Marson <bmarson@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-26 10:23:56 +01:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
GFS2: Fix ail list traversal In the recent patches to update the AIL list code, I managed to forget that the ail list lock got dropped, even though I added a comment specifically to remind myself :( Reported-by: Barry Marson <bmarson@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-26 10:23:56 +01:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
GFS2: Add an AIL writeback tracepoint Add a tracepoint for monitoring writeback of the AIL. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:38 +01:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] Move logging code into log.c (mostly) This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03 11:10:41 -04:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] Move logging code into log.c (mostly) This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03 11:10:41 -04:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] Move logging code into log.c (mostly) This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03 11:10:41 -04:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: introduce AIL lock The log lock is currently used to protect the AIL lists and the movements of buffers into and out of them. The lists are self contained and no log specific items outside the lists are accessed when starting or emptying the AIL lists. Hence the operation of the AIL does not require the protection of the log lock so split them out into a new AIL specific lock to reduce the amount of traffic on the log lock. This will also reduce the amount of serialisation that occurs when the gfs2_logd pushes on the AIL to move it forward. This reduces the impact of log pushing on sequential write throughput. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11 11:52:25 +00:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: introduce AIL lock The log lock is currently used to protect the AIL lists and the movements of buffers into and out of them. The lists are self contained and no log specific items outside the lists are accessed when starting or emptying the AIL lists. Hence the operation of the AIL does not require the protection of the log lock so split them out into a new AIL specific lock to reduce the amount of traffic on the log lock. This will also reduce the amount of serialisation that occurs when the gfs2_logd pushes on the AIL to move it forward. This reduces the impact of log pushing on sequential write throughput. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11 11:52:25 +00:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Wait properly when flushing the ail list The ail flush code has always relied upon log flushing to prevent it from spinning needlessly. This fixes it to wait on the last I/O request submitted (we don't need to wait for all of it) instead of either spinning with io_schedule or sleeping. As a result cpu usage of gfs2_logd is much reduced with certain workloads. Reported-by: Abhijith Das <adas@redhat.com> Tested-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-21 19:21:07 +01:00
[GFS2] Move logging code into log.c (mostly) This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03 11:10:41 -04:00
[GFS2] Remove useless i_cache from inodes The i_cache was designed to keep references to the indirect blocks used during block mapping so that they didn't have to be looked up continually. The idea failed because there are too many places where the i_cache needs to be freed, and this has in the past been the cause of many bugs. In addition there was no performance benefit being gained since the disk blocks in question were cached anyway. So this patch removes it in order to simplify the code to prepare for other changes which would otherwise have had to add further support for this feature. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-15 16:29:05 +01:00
[GFS2] Move logging code into log.c (mostly) This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03 11:10:41 -04:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: introduce AIL lock The log lock is currently used to protect the AIL lists and the movements of buffers into and out of them. The lists are self contained and no log specific items outside the lists are accessed when starting or emptying the AIL lists. Hence the operation of the AIL does not require the protection of the log lock so split them out into a new AIL specific lock to reduce the amount of traffic on the log lock. This will also reduce the amount of serialisation that occurs when the gfs2_logd pushes on the AIL to move it forward. This reduces the impact of log pushing on sequential write throughput. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11 11:52:25 +00:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: introduce AIL lock The log lock is currently used to protect the AIL lists and the movements of buffers into and out of them. The lists are self contained and no log specific items outside the lists are accessed when starting or emptying the AIL lists. Hence the operation of the AIL does not require the protection of the log lock so split them out into a new AIL specific lock to reduce the amount of traffic on the log lock. This will also reduce the amount of serialisation that occurs when the gfs2_logd pushes on the AIL to move it forward. This reduces the impact of log pushing on sequential write throughput. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11 11:52:25 +00:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Make the log reserved blocks depend on block size The number of blocks which we reserve in the log at the start of each transaction needs to depends upon the block size since the overhead is related to the number of "pointers" which can be fitted into a single block. This relates to Red Hat bz #240435 Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-01 15:19:33 +01:00
[GFS2] assertion failure after writing to journaled file, umount This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 14:50:20 -05:00
[GFS2] Fix journal flush problem This fixes a bug which resulted in poor performance due to flushing the journal too often. The code path in question was via the inode_go_sync() function in glops.c. The solution is not to flush the journal immediately when inodes are ejected from memory, but batch up the work for glockd to deal with later on. This means that glocks may now live on beyond the end of the lifetime of their inodes (but not very much longer in the normal case). Also fixed in this patch is a bug (which was hidden by the bug mentioned above) in calculation of the number of free journal blocks. The gfs2_logd process has been altered to be more responsive to the journal filling up. We now wake it up when the number of uncommitted journal blocks has reached the threshold level rather than trying to flush directly at the end of each transaction. This again means doing fewer, but larger, log flushes in general. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-23 10:51:34 -05:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Make the log reserved blocks depend on block size The number of blocks which we reserve in the log at the start of each transaction needs to depends upon the block size since the overhead is related to the number of "pointers" which can be fitted into a single block. This relates to Red Hat bz #240435 Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-01 15:19:33 +01:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
GFS2: Add tracepoints This patch adds the ability to trace various aspects of the GFS2 filesystem. The trace points are divided into three groups, glocks, logging and bmap. These points have been chosen because they allow inspection of the major internal functions of GFS2 and they are also generic enough that they are unlikely to need any major changes as the filesystem evolves. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-06-12 08:49:20 +01:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
[GFS2] Update locking in log.c Replace the lock_for_trans()/lock_for_flush() functions with an rwsem. In fact the sd_log_flush_lock becomes an rwsem (the write part of it) and is extended slightly to cover everything that the lock_for_flush() used to cover. The read part of the lock is instead of lock_for_trans(). This corrects the races in the original code and reduces the code size. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-29 09:12:12 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Tidy up log.c Based upon previous feedback from lkml and also removing some commented out debugging which is no longer needed. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-13 11:13:27 -04:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] assertion failure after writing to journaled file, umount This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 14:50:20 -05:00
GFS2: Allow the number of committed revokes to temporarily be negative GFS2 tracks the number of revokes and unrevokes that are part of committed transactions via sd_log_commited_revoke. It is possible for one process to add revokes during its transaction, while another process unrevokes them during its transaction. If the second process finishes its transaction first, sd_log_commited_revoke will be decremented by the number of unrevokes that the second process did, without first being incremented by the number of revokes the first process did. This is fine, since all started transactions must be completed before the journal can be flushed. However, sd_log_commited_revoke is an unsigned integer, and log_refund() causes an assertion failure if it would go negative at the end of a transaction. This patch makes sd_log_commited_revoke a signed integer and allows it to go negative. __gfs2_log_flush() still checks that it mataches the actual number of revokes. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-03-10 18:10:19 -06:00
[GFS2] assertion failure after writing to journaled file, umount This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 14:50:20 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: introduce AIL lock The log lock is currently used to protect the AIL lists and the movements of buffers into and out of them. The lists are self contained and no log specific items outside the lists are accessed when starting or emptying the AIL lists. Hence the operation of the AIL does not require the protection of the log lock so split them out into a new AIL specific lock to reduce the amount of traffic on the log lock. This will also reduce the amount of serialisation that occurs when the gfs2_logd pushes on the AIL to move it forward. This reduces the impact of log pushing on sequential write throughput. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11 11:52:25 +00:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Tidy up log.c Based upon previous feedback from lkml and also removing some commented out debugging which is no longer needed. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-13 11:13:27 -04:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Tidy up log.c Based upon previous feedback from lkml and also removing some commented out debugging which is no longer needed. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-13 11:13:27 -04:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: introduce AIL lock The log lock is currently used to protect the AIL lists and the movements of buffers into and out of them. The lists are self contained and no log specific items outside the lists are accessed when starting or emptying the AIL lists. Hence the operation of the AIL does not require the protection of the log lock so split them out into a new AIL specific lock to reduce the amount of traffic on the log lock. This will also reduce the amount of serialisation that occurs when the gfs2_logd pushes on the AIL to move it forward. This reduces the impact of log pushing on sequential write throughput. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11 11:52:25 +00:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] assertion failure after writing to journaled file, umount This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 14:50:20 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Use atomic_t for journal free blocks counter This patch changes the counter which keeps track of the free blocks in the journal to an atomic_t in preparation for the following patch which will update the log reservation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-11-08 14:55:03 +00:00
GFS2: Add tracepoints This patch adds the ability to trace various aspects of the GFS2 filesystem. The trace points are divided into three groups, glocks, logging and bmap. These points have been chosen because they allow inspection of the major internal functions of GFS2 and they are also generic enough that they are unlikely to need any major changes as the filesystem evolves. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-06-12 08:49:20 +01:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Clean up log flush header writing We already send both a pre and post flush to the block device when writing a journal header. There is no need to wait for the previous I/O specifically when we do this, unless we've turned "barriers" off. As a side effect, this also cleans up the code path for flushing the journal and makes it more readable. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09 10:45:56 +00:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Clean up journaled data writing This patch cleans up the code for writing journaled data into the log. It also removes the need to allocate a small "tag" structure for each block written into the log. Instead we just keep count of the outstanding I/O so that we can be sure that its all been written at the correct time. Another result of this patch is that a number of ll_rw_block() calls have become submit_bh() calls, closing some races at the same time. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-17 10:59:52 +01:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Clean up journaled data writing This patch cleans up the code for writing journaled data into the log. It also removes the need to allocate a small "tag" structure for each block written into the log. Instead we just keep count of the outstanding I/O so that we can be sure that its all been written at the correct time. Another result of this patch is that a number of ll_rw_block() calls have become submit_bh() calls, closing some races at the same time. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-17 10:59:52 +01:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
GFS2: Sort the ordered write list This patch sorts the ordered write list for GFS2 writes. This increases the throughput for simultaneous writes. For example, if you have ten processes, all doing: dd if=/dev/zero of=/mnt/gfs2/fileX on different files, the throughput will be much better. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-14 14:49:57 -05:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
GFS2: Sort the ordered write list This patch sorts the ordered write list for GFS2 writes. This increases the throughput for simultaneous writes. For example, if you have ten processes, all doing: dd if=/dev/zero of=/mnt/gfs2/fileX on different files, the throughput will be much better. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-14 14:49:57 -05:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
GFS2: Sort the ordered write list This patch sorts the ordered write list for GFS2 writes. This increases the throughput for simultaneous writes. For example, if you have ten processes, all doing: dd if=/dev/zero of=/mnt/gfs2/fileX on different files, the throughput will be much better. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-14 14:49:57 -05:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
GFS2: Sort the ordered write list This patch sorts the ordered write list for GFS2 writes. This increases the throughput for simultaneous writes. For example, if you have ten processes, all doing: dd if=/dev/zero of=/mnt/gfs2/fileX on different files, the throughput will be much better. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-14 14:49:57 -05:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
GFS2: Sort the ordered write list This patch sorts the ordered write list for GFS2 writes. This increases the throughput for simultaneous writes. For example, if you have ten processes, all doing: dd if=/dev/zero of=/mnt/gfs2/fileX on different files, the throughput will be much better. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-14 14:49:57 -05:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
GFS2: Use ->writepages for ordered writes Instead of using a list of buffers to write ahead of the journal flush, this now uses a list of inodes and calls ->writepages via filemap_fdatawrite() in order to achieve the same thing. For most use cases this results in a shorter ordered write list, as well as much larger i/os being issued. The ordered write list is sorted by inode number before writing in order to retain the disk block ordering between inodes as per the previous code. The previous ordered write code used to conflict in its assumptions about how to write out the disk blocks with mpage_writepages() so that with this updated version we can also use mpage_writepages() for GFS2's ordered write, writepages implementation. So we will also send larger i/os from writeback too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-28 09:30:07 +00:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
GFS2: Clean up log flush header writing We already send both a pre and post flush to the block device when writing a journal header. There is no need to wait for the previous I/O specifically when we do this, unless we've turned "barriers" off. As a side effect, this also cleans up the code path for flushing the journal and makes it more readable. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09 10:45:56 +00:00
GFS2: Drop "pull" argument from log_write_header() The "pull" argument to log_write_header() is only used for debug purposes and it is not really needed any more. There are other tests for this particular problem, so I think we can dispose of it in order to simplify the code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-02 15:34:36 +01:00
GFS2: Clean up log flush header writing We already send both a pre and post flush to the block device when writing a journal header. There is no need to wait for the previous I/O specifically when we do this, unless we've turned "barriers" off. As a side effect, this also cleans up the code path for flushing the journal and makes it more readable. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09 10:45:56 +00:00
GFS2: Clean up log write code path Prior to this patch, we have two ways of sending i/o to the log. One of those is used when we need to allocate both the data to be written itself and also a buffer head to submit it. This is done via sb_getblk and friends. This is used mostly for writing log headers. The other method is used when writing blocks which have some in-place counterpart. This is the case for all the metadata blocks which are journalled, and when journaled data is in use, for unescaped journalled data blocks. This patch replaces both of those two methods, and about half a dozen separate i/o submission points with a single i/o submission function. We also go direct to bio rather than using buffer heads, since this allows us to build i/o requests of the maximum size for the block device in question. It also reduces the memory required for flushing the log, which can be very useful in low memory situations. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-16 09:28:31 +01:00
GFS2: Clean up log flush header writing We already send both a pre and post flush to the block device when writing a journal header. There is no need to wait for the previous I/O specifically when we do this, unless we've turned "barriers" off. As a side effect, this also cleans up the code path for flushing the journal and makes it more readable. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09 10:45:56 +00:00
GFS2: Clean up log write code path Prior to this patch, we have two ways of sending i/o to the log. One of those is used when we need to allocate both the data to be written itself and also a buffer head to submit it. This is done via sb_getblk and friends. This is used mostly for writing log headers. The other method is used when writing blocks which have some in-place counterpart. This is the case for all the metadata blocks which are journalled, and when journaled data is in use, for unescaped journalled data blocks. This patch replaces both of those two methods, and about half a dozen separate i/o submission points with a single i/o submission function. We also go direct to bio rather than using buffer heads, since this allows us to build i/o requests of the maximum size for the block device in question. It also reduces the memory required for flushing the log, which can be very useful in low memory situations. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-16 09:28:31 +01:00
GFS2: Clean up log flush header writing We already send both a pre and post flush to the block device when writing a journal header. There is no need to wait for the previous I/O specifically when we do this, unless we've turned "barriers" off. As a side effect, this also cleans up the code path for flushing the journal and makes it more readable. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09 10:45:56 +00:00
GFS2: Clean up log write code path Prior to this patch, we have two ways of sending i/o to the log. One of those is used when we need to allocate both the data to be written itself and also a buffer head to submit it. This is done via sb_getblk and friends. This is used mostly for writing log headers. The other method is used when writing blocks which have some in-place counterpart. This is the case for all the metadata blocks which are journalled, and when journaled data is in use, for unescaped journalled data blocks. This patch replaces both of those two methods, and about half a dozen separate i/o submission points with a single i/o submission function. We also go direct to bio rather than using buffer heads, since this allows us to build i/o requests of the maximum size for the block device in question. It also reduces the memory required for flushing the log, which can be very useful in low memory situations. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-16 09:28:31 +01:00
GFS2: Clean up log flush header writing We already send both a pre and post flush to the block device when writing a journal header. There is no need to wait for the previous I/O specifically when we do this, unless we've turned "barriers" off. As a side effect, this also cleans up the code path for flushing the journal and makes it more readable. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09 10:45:56 +00:00
GFS2: Clean up log write code path Prior to this patch, we have two ways of sending i/o to the log. One of those is used when we need to allocate both the data to be written itself and also a buffer head to submit it. This is done via sb_getblk and friends. This is used mostly for writing log headers. The other method is used when writing blocks which have some in-place counterpart. This is the case for all the metadata blocks which are journalled, and when journaled data is in use, for unescaped journalled data blocks. This patch replaces both of those two methods, and about half a dozen separate i/o submission points with a single i/o submission function. We also go direct to bio rather than using buffer heads, since this allows us to build i/o requests of the maximum size for the block device in question. It also reduces the memory required for flushing the log, which can be very useful in low memory situations. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-16 09:28:31 +01:00
GFS2: Clean up log flush header writing We already send both a pre and post flush to the block device when writing a journal header. There is no need to wait for the previous I/O specifically when we do this, unless we've turned "barriers" off. As a side effect, this also cleans up the code path for flushing the journal and makes it more readable. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09 10:45:56 +00:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Fix a ref count bug and other clean ups This fixes a ref count bug that sometimes showed up a umount time (causing it to hang) but it otherwise mostly harmless. At the same time there are some clean ups including making the log operations structures const, moving a memory allocation so that its not done in the fast path of checking to see if there is an outstanding transaction related to a particular glock. Removes the sd_log_wrap varaible which was updated, but never actually used anywhere. Updates the gfs2 ioctl() to run without the kernel lock (which it never needed anyway). Removes the "invalidate inodes" loop from GFS2's put_super routine. This is done in kill super anyway so we don't need to do it here. The loop was also bogus in that if there are any inodes "stuck" at this point its a bug and we need to know about it rather than hide it by hanging forever. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-07 11:17:32 -04:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Rework reclaiming unlinked dinodes The previous patch I wrote for reclaiming unlinked dinodes had some shortcomings and did not prevent all hangs. This version is much cleaner and more logical, and has passed very difficult testing. Sorry for the churn. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-20 23:30:11 -04:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Update locking in log.c Replace the lock_for_trans()/lock_for_flush() functions with an rwsem. In fact the sd_log_flush_lock becomes an rwsem (the write part of it) and is extended slightly to cover everything that the lock_for_flush() used to cover. The read part of the lock is instead of lock_for_trans(). This corrects the races in the original code and reduces the code size. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-29 09:12:12 -05:00
[GFS2] Use mutices rather than semaphores As well as a number of minor bug fixes, this patch changes GFS to use mutices rather than semaphores. This results in better information in case there are any locking problems. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-21 12:51:39 +00:00
[GFS2] Don't add glocks to the journal The only reason for adding glocks to the journal was to keep track of which locks required a log flush prior to release. We add a flag to the glock to allow this check to be made in a simpler way. This reduces the size of a glock (by 12 bytes on i386, 24 on x86_64) and means that we can avoid extra work during the journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-11-08 14:25:12 +00:00
[GFS2] Use mutices rather than semaphores As well as a number of minor bug fixes, this patch changes GFS to use mutices rather than semaphores. This results in better information in case there are any locking problems. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-21 12:51:39 +00:00
GFS2: Add tracepoints This patch adds the ability to trace various aspects of the GFS2 filesystem. The trace points are divided into three groups, glocks, logging and bmap. These points have been chosen because they allow inspection of the major internal functions of GFS2 and they are also generic enough that they are unlikely to need any major changes as the filesystem evolves. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-06-12 08:49:20 +01:00
[GFS2] Use mutices rather than semaphores As well as a number of minor bug fixes, this patch changes GFS to use mutices rather than semaphores. This results in better information in case there are any locking problems. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-21 12:51:39 +00:00
[GFS2] Fix a ref count bug and other clean ups This fixes a ref count bug that sometimes showed up a umount time (causing it to hang) but it otherwise mostly harmless. At the same time there are some clean ups including making the log operations structures const, moving a memory allocation so that its not done in the fast path of checking to see if there is an outstanding transaction related to a particular glock. Removes the sd_log_wrap varaible which was updated, but never actually used anywhere. Updates the gfs2 ioctl() to run without the kernel lock (which it never needed anyway). Removes the "invalidate inodes" loop from GFS2's put_super routine. This is done in kill super anyway so we don't need to do it here. The loop was also bogus in that if there are any inodes "stuck" at this point its a bug and we need to know about it rather than hide it by hanging forever. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-07 11:17:32 -04:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Clean up journaled data writing This patch cleans up the code for writing journaled data into the log. It also removes the need to allocate a small "tag" structure for each block written into the log. Instead we just keep count of the outstanding I/O so that we can be sure that its all been written at the correct time. Another result of this patch is that a number of ll_rw_block() calls have become submit_bh() calls, closing some races at the same time. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-17 10:59:52 +01:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Clean up log write code path Prior to this patch, we have two ways of sending i/o to the log. One of those is used when we need to allocate both the data to be written itself and also a buffer head to submit it. This is done via sb_getblk and friends. This is used mostly for writing log headers. The other method is used when writing blocks which have some in-place counterpart. This is the case for all the metadata blocks which are journalled, and when journaled data is in use, for unescaped journalled data blocks. This patch replaces both of those two methods, and about half a dozen separate i/o submission points with a single i/o submission function. We also go direct to bio rather than using buffer heads, since this allows us to build i/o requests of the maximum size for the block device in question. It also reduces the memory required for flushing the log, which can be very useful in low memory situations. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-16 09:28:31 +01:00
[GFS2] Clean up ordered write code The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-09-02 10:48:13 +01:00
GFS2: Clean up log flush header writing We already send both a pre and post flush to the block device when writing a journal header. There is no need to wait for the previous I/O specifically when we do this, unless we've turned "barriers" off. As a side effect, this also cleans up the code path for flushing the journal and makes it more readable. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09 10:45:56 +00:00
GFS2: Drop "pull" argument from log_write_header() The "pull" argument to log_write_header() is only used for debug purposes and it is not really needed any more. There are other tests for this particular problem, so I think we can dispose of it in order to simplify the code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-02 15:34:36 +01:00
GFS2: Clean up log flush header writing We already send both a pre and post flush to the block device when writing a journal header. There is no need to wait for the previous I/O specifically when we do this, unless we've turned "barriers" off. As a side effect, this also cleans up the code path for flushing the journal and makes it more readable. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09 10:45:56 +00:00
[GFS2] Use atomic_t for journal free blocks counter This patch changes the counter which keeps track of the free blocks in the journal to an atomic_t in preparation for the following patch which will update the log reservation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-11-08 14:55:03 +00:00
GFS2: Add tracepoints This patch adds the ability to trace various aspects of the GFS2 filesystem. The trace points are divided into three groups, glocks, logging and bmap. These points have been chosen because they allow inspection of the major internal functions of GFS2 and they are also generic enough that they are unlikely to need any major changes as the filesystem evolves. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-06-12 08:49:20 +01:00
GFS2: Drop "pull" argument from log_write_header() The "pull" argument to log_write_header() is only used for debug purposes and it is not really needed any more. There are other tests for this particular problem, so I think we can dispose of it in order to simplify the code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-02 15:34:36 +01:00
[GFS2] assertion failure after writing to journaled file, umount This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 14:50:20 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Fix bug where lock not held The log lock needs to be held when manipulating the counter for the number of free journal blocks. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-11 13:34:59 -04:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Tidy up log.c Based upon previous feedback from lkml and also removing some commented out debugging which is no longer needed. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-13 11:13:27 -04:00
[GFS2] assertion failure after writing to journaled file, umount This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 14:50:20 -05:00
[GFS2] Tidy up log.c Based upon previous feedback from lkml and also removing some commented out debugging which is no longer needed. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-13 11:13:27 -04:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: introduce AIL lock The log lock is currently used to protect the AIL lists and the movements of buffers into and out of them. The lists are self contained and no log specific items outside the lists are accessed when starting or emptying the AIL lists. Hence the operation of the AIL does not require the protection of the log lock so split them out into a new AIL specific lock to reduce the amount of traffic on the log lock. This will also reduce the amount of serialisation that occurs when the gfs2_logd pushes on the AIL to move it forward. This reduces the impact of log pushing on sequential write throughput. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11 11:52:25 +00:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: introduce AIL lock The log lock is currently used to protect the AIL lists and the movements of buffers into and out of them. The lists are self contained and no log specific items outside the lists are accessed when starting or emptying the AIL lists. Hence the operation of the AIL does not require the protection of the log lock so split them out into a new AIL specific lock to reduce the amount of traffic on the log lock. This will also reduce the amount of serialisation that occurs when the gfs2_logd pushes on the AIL to move it forward. This reduces the impact of log pushing on sequential write throughput. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11 11:52:25 +00:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Add tracepoints This patch adds the ability to trace various aspects of the GFS2 filesystem. The trace points are divided into three groups, glocks, logging and bmap. These points have been chosen because they allow inspection of the major internal functions of GFS2 and they are also generic enough that they are unlikely to need any major changes as the filesystem evolves. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-06-12 08:49:20 +01:00
[GFS2] Update locking in log.c Replace the lock_for_trans()/lock_for_flush() functions with an rwsem. In fact the sd_log_flush_lock becomes an rwsem (the write part of it) and is extended slightly to cover everything that the lock_for_flush() used to cover. The read part of the lock is instead of lock_for_trans(). This corrects the races in the original code and reduces the code size. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-29 09:12:12 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] assertion failure after writing to journaled file, umount This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 14:50:20 -05:00
[GFS2] Fix assert in log code Although the values were all being calculated correctly, there was a race in the assert due to the way it was using atomic variables. This changes the value we assert on so that we get the same effect by testing a different variable. This prevents the assert triggering when it shouldn't. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-10 14:49:43 +00:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] assertion failure after writing to journaled file, umount This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 14:50:20 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] assertion failure after writing to journaled file, umount This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 14:50:20 -05:00
[GFS2] fix assertion in log_refund() since unsigned, unused >= 0 is always true. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-04-17 17:25:37 +02:00
[GFS2] Fix assert in log code Although the values were all being calculated correctly, there was a race in the assert due to the way it was using atomic variables. This changes the value we assert on so that we get the same effect by testing a different variable. This prevents the assert triggering when it shouldn't. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-10 14:49:43 +00:00
GFS2: Add tracepoints This patch adds the ability to trace various aspects of the GFS2 filesystem. The trace points are divided into three groups, glocks, logging and bmap. These points have been chosen because they allow inspection of the major internal functions of GFS2 and they are also generic enough that they are unlikely to need any major changes as the filesystem evolves. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-06-12 08:49:20 +01:00
[GFS2] Use atomic_t for journal free blocks counter This patch changes the counter which keeps track of the free blocks in the journal to an atomic_t in preparation for the following patch which will update the log reservation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-11-08 14:55:03 +00:00
[GFS2] assertion failure after writing to journaled file, umount This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 14:50:20 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Update locking in log.c Replace the lock_for_trans()/lock_for_flush() functions with an rwsem. In fact the sd_log_flush_lock becomes an rwsem (the write part of it) and is extended slightly to cover everything that the lock_for_flush() used to cover. The read part of the lock is instead of lock_for_trans(). This corrects the races in the original code and reduces the code size. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-29 09:12:12 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Update locking in log.c Replace the lock_for_trans()/lock_for_flush() functions with an rwsem. In fact the sd_log_flush_lock becomes an rwsem (the write part of it) and is extended slightly to cover everything that the lock_for_flush() used to cover. The read part of the lock is instead of lock_for_trans(). This corrects the races in the original code and reduces the code size. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-29 09:12:12 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
GFS2: Drop "pull" argument from log_write_header() The "pull" argument to log_write_header() is only used for debug purposes and it is not really needed any more. There are other tests for this particular problem, so I think we can dispose of it in order to simplify the code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-02 15:34:36 +01:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Use atomic_t for journal free blocks counter This patch changes the counter which keeps track of the free blocks in the journal to an atomic_t in preparation for the following patch which will update the log reservation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-11-08 14:55:03 +00:00
[GFS2] sem -> mutex conversion in locking.c Convert a semaphore to a mutex in locking.c and also tidy up one or two loose ends. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-21 15:10:46 -04:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Update locking in log.c Replace the lock_for_trans()/lock_for_flush() functions with an rwsem. In fact the sd_log_flush_lock becomes an rwsem (the write part of it) and is extended slightly to cover everything that the lock_for_flush() used to cover. The read part of the lock is instead of lock_for_trans(). This corrects the races in the original code and reduces the code size. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-29 09:12:12 -05:00
[GFS2] The core of GFS2 This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00
[GFS2] Move gfs2_meta_syncfs() into log.c By moving gfs2_meta_syncfs() into log.c, gfs2_ail1_start() can be made static. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-23 11:06:35 -05:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
GFS2: Wait properly when flushing the ail list The ail flush code has always relied upon log flushing to prevent it from spinning needlessly. This fixes it to wait on the last I/O request submitted (we don't need to wait for all of it) instead of either spinning with io_schedule or sleeping. As a result cpu usage of gfs2_logd is much reduced with certain workloads. Reported-by: Abhijith Das <adas@redhat.com> Tested-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-21 19:21:07 +01:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] Move gfs2_meta_syncfs() into log.c By moving gfs2_meta_syncfs() into log.c, gfs2_ail1_start() can be made static. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-23 11:06:35 -05:00
GFS2: Resolve inode eviction and ail list interaction bug This patch contains a few misc fixes which resolve a recently reported issue. This patch has been a real team effort and has received a lot of testing. The first issue is that the ail lock needs to be held over a few more operations. The lock thats added into gfs2_releasepage() may possibly be a candidate for replacing with RCU at some future point, but at this stage we've gone for the obvious fix. The second issue is that gfs2_write_inode() can end up calling a glock recursively when called from gfs2_evict_inode() via the syncing code, so it needs a guard added. The third issue is that we either need to not truncate the metadata pages of inodes which have zero link count, but which we cannot deallocate due to them still being in use by other nodes, or we need to ensure that those pages have all made it through the journal and ail lists first. This patch takes the former approach, but the latter has also been tested and there is nothing to choose between them performance-wise. So again, we could revise that decision in the future. Also, the inode eviction process is now better documented. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Tested-by: Bob Peterson <rpeterso@redhat.com> Tested-by: Abhijith Das <adas@redhat.com> Reported-by: Barry J. Marson <bmarson@redhat.com> Reported-by: David Teigland <teigland@redhat.com>
2011-07-14 08:59:44 +01:00
[GFS2] Move gfs2_meta_syncfs() into log.c By moving gfs2_meta_syncfs() into log.c, gfs2_ail1_start() can be made static. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-23 11:06:35 -05:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
[GFS2] Move gfs2_logd into log.c This means that we can mark gfs2_ail1_empty static and prepares the way for further changes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-11-09 10:01:41 +00:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
[GFS2] Move gfs2_logd into log.c This means that we can mark gfs2_ail1_empty static and prepares the way for further changes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-11-09 10:01:41 +00:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
[GFS2] Move gfs2_logd into log.c This means that we can mark gfs2_ail1_empty static and prepares the way for further changes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-11-09 10:01:41 +00:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
GFS2: Wait properly when flushing the ail list The ail flush code has always relied upon log flushing to prevent it from spinning needlessly. This fixes it to wait on the last I/O request submitted (we don't need to wait for all of it) instead of either spinning with io_schedule or sleeping. As a result cpu usage of gfs2_logd is much reduced with certain workloads. Reported-by: Abhijith Das <adas@redhat.com> Tested-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-21 19:21:07 +01:00
GFS2: Make writeback more responsive to system conditions This patch adds writeback_control to writing back the AIL list. This means that we can then take advantage of the information we get in ->write_inode() in order to set off some pre-emptive writeback. In addition, the AIL code is cleaned up a bit to make it a bit simpler to understand. There is still more which can usefully be done in this area, but this is a good start at least. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 14:18:09 +01:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
GFS2: Wait properly when flushing the ail list The ail flush code has always relied upon log flushing to prevent it from spinning needlessly. This fixes it to wait on the last I/O request submitted (we don't need to wait for all of it) instead of either spinning with io_schedule or sleeping. As a result cpu usage of gfs2_logd is much reduced with certain workloads. Reported-by: Abhijith Das <adas@redhat.com> Tested-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-21 19:21:07 +01:00
[GFS2] Move gfs2_logd into log.c This means that we can mark gfs2_ail1_empty static and prepares the way for further changes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-11-09 10:01:41 +00:00
freezer: unexport refrigerator() and update try_to_freeze() slightly There is no reason to export two functions for entering the refrigerator. Calling refrigerator() instead of try_to_freeze() doesn't save anything noticeable or removes any race condition. * Rename refrigerator() to __refrigerator() and make it return bool indicating whether it scheduled out for freezing. * Update try_to_freeze() to return bool and relay the return value of __refrigerator() if freezing(). * Convert all refrigerator() users to try_to_freeze(). * Update documentation accordingly. * While at it, add might_sleep() to try_to_freeze(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Chris Mason <chris.mason@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Christoph Hellwig <hch@infradead.org>
2011-11-21 12:32:22 -08:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
GFS2: gfs2_logd should be using interruptible waits Looks like this crept in, in a recent update. Reported-by: Krzysztof Urbaniak <urban@bash.org.pl> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-09-09 14:45:00 +01:00
GFS2: Various gfs2_logd improvements This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 14:29:16 -05:00
[GFS2] Move gfs2_logd into log.c This means that we can mark gfs2_ail1_empty static and prepares the way for further changes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-11-09 10:01:41 +00:00