kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/tools/testing/ktest/ktest.pl

3653 lines
78 KiB
Raw Normal View History

Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
trivial: Fix Steven's Copyright typos OK, the copyright allows you to write a copy, still I think the lawyers prefer the correct spelling. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> LKML-Reference: <1295899921-11333-1-git-send-email-u.kleine-koenig@pengutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-01-24 21:12:01 +01:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Change initialization of defaults hash to perl format Initializing each default value by specifying the hash name is ugly. This is one of the rare cases that the "perl way" is actually much cleaner and easier to read. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:32:05 -05:00
ktest: Add MIN_CONFIG_TYPE to allow making a minum .config that has network Add a MIN_CONFIG_TYPE that can be set to 'test' or 'boot'. The default is 'boot' which is what make_min_config has done previously: makes a config file that is the minimum needed to boot the target. But when MIN_CONFIG_TYPE is set to 'test', not only must the target boot, but it must also successfully run the TEST. This allows the creation of a config file that is the minimum to boot and also perform ssh to the target, or anything else a developer wants. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-21 17:13:40 -04:00
ktest: Change initialization of defaults hash to perl format Initializing each default value by specifying the hash name is ugly. This is one of the rare cases that the "perl way" is actually much cleaner and easier to read. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:32:05 -05:00
ktest: Add SCP_TO_TARGET_INSTALL option Currently the option used to scp both the modules to the target as well as the kernel image are the same (SCP_TO_TARGET). But some embedded boards may require them to be different. The modules may need to be put directly on the board, but the kernel image may need to go to a tftpserver. Add the option SCP_TO_TARGET_INSTALL that will allow the user to change the config so that they may have the modules and image got to different machines. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:21:24 -04:00
ktest: Change initialization of defaults hash to perl format Initializing each default value by specifying the hash name is ugly. This is one of the rare cases that the "perl way" is actually much cleaner and easier to read. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:32:05 -05:00
ktest: Add default for ssh-user, build-target and target-image When a user runs ktest without an argument, or the argument given is not a config file that exists, ktest will ask the user a few questions to create a simple ktest config file. A few of the questions should have a default value set, that if anything it will make it easier for the user to know what is suppose to be in that value. These new values are: SSH_USER, BUILD_TARGET and TARGET_IMAGE Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-21 20:12:04 -05:00
ktest: Change initialization of defaults hash to perl format Initializing each default value by specifying the hash name is ugly. This is one of the rare cases that the "perl way" is actually much cleaner and easier to read. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:32:05 -05:00
ktest: Detect typos in option names It becomes quite annoying when you go to run a test and then realize that you typed an option name wrong, and the test starts doing the default action and not what you expected it to do. It is even more annoying when you wake up the next day after running the test over night when you discover this. By testing if all options specified in a config file are used by either ktest or were used in one of the option's values we can see if there are any dangling options that were not used. In such a case, show the user the options that were not used and ask them if they want to continue or not. The option IGNORE_UNUSED was also added to allow the user to override this feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:37:22 -05:00
ktest: Change initialization of defaults hash to perl format Initializing each default value by specifying the hash name is ugly. This is one of the rare cases that the "perl way" is actually much cleaner and easier to read. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:32:05 -05:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Fix kernelrevision with POST_BUILD The PRE_BUILD and POST_BUILD options of ktest are added to allow the user to add temporary patch to the system and remove it on builds. This is sometimes use to take a change from another git branch and add it to a series without the fix so that this series can be tested, when an unrelated bug exists in the series. The problem comes when a tagged commit is being used. For example, if v3.2 is being tested, and we add a patch to it, the kernelrelease for that commit will be 3.2.0+, but without the patch the version will be 3.2.0. This can cause problems when the kernelrelease is determined for creating the /lib/modules directory. The kernel booting has the '+' but the module directory will not, and the modules will be missing for that boot, and may not allow the kernel to succeed. The fix is to put the creation of the kernelrelease in the POST_BUILD logic, before it applies the POST_BUILD operation. The POST_BUILD is where the patch may be removed, removing the '+' from the kernelrelease. The calculation of the kernelrelease will also stay in its current location but will be ignored if it was already calculated previously. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-18 13:34:35 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Use $output_config instead of typing $outputdir/.config To help prevent typos, use $output_config as the reference to "$outputdir/.config". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 16:43:21 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add POST/PRE_BUILD options There are some cases that a patch may be needed to apply to the kernel in patchcheck or bisect tests. Adding a PRE_BUILD option to apply the patch and POST_BUILD to remove it, allows for this to be done easily. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:39:31 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST For machines that do no use grub, it may be needed to update an external image (tftp) before doing a reboot into either the test image or the known good image. The option SWITCH_TO_GOOD is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into a known good image. The option SWITCH_TO_TEST is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into the test image. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 16:29:10 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Allow a test to override REBOOT_ON_SUCCESS The option REBOOT_ON_SUCCESS is global, and will have the machine reboot the the box if all tests are successful. But a test may not want the machine to reboot, and perhaps have the kernel it loaded be used to install the next kernel. Or the last test may set up a kernel that the user may want to look at. In this case, the user could have the global option REBOOT_ON_SUCCESS be true, but if a test is defined to run at the end, that test can override the global option and keep the kernel it installed for the user to log in with. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 11:18:27 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Add SCP_TO_TARGET_INSTALL option Currently the option used to scp both the modules to the target as well as the kernel image are the same (SCP_TO_TARGET). But some embedded boards may require them to be different. The modules may need to be put directly on the board, but the kernel image may need to go to a tftpserver. Add the option SCP_TO_TARGET_INSTALL that will allow the user to change the config so that they may have the modules and image got to different machines. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:21:24 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add POST_INSTALL to allow initrds to be created Add a POST_INSTALL option that runs after the build and install but before rebooting to the test kernel. This alls the user to run a script that will install an initrd (or anything else that may be special) before booting. An environment variable KERNEL_VERSION is set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:33 -04:00
ktest: Add NO_INSTALL option to not install for a test There's cases where running the same kernel over and over again is useful, and being able to not install the same kernel can save time between tests. Add a NO_INSTALL option that tells ktest.pl to not install the new kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 17:50:48 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Add MIN_CONFIG_TYPE to allow making a minum .config that has network Add a MIN_CONFIG_TYPE that can be set to 'test' or 'boot'. The default is 'boot' which is what make_min_config has done previously: makes a config file that is the minimum needed to boot the target. But when MIN_CONFIG_TYPE is set to 'test', not only must the target boot, but it must also successfully run the TEST. This allows the creation of a config file that is the minimum to boot and also perform ssh to the target, or anything else a developer wants. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-21 17:13:40 -04:00
ktest: Add USE_OUTPUT_MIN_CONFIG to avoid prompt on make_min_config If the file that OUTPUT_MIN_CONFIG exists then ktest.pl will prompt the user and ask them if the OUTPUT_MIN_CONFIG should be used as the starting point for make_min_config instead of MIN_CONFIG. This is usually the case, and to allow the user to do so, which is helpful if the user is creating different min configs based on tests, and they know one is a superset of another test, they can set USE_OUTPUT_MIN_CONFIG to one, which will prevent kest.pl from prompting to use the OUTPUT_MIN_CONFIG and it will just use it. If USE_OUTPUT_MIN_CONIFG is set to zero, then ktest.pl will continue to use MIN_CONFIG instead. The default is that USE_OUTPUT_MIN_CONFIG is undefined. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-21 23:35:12 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Add INGORE_ERRORS to ignore warnings in boot up When testing a kernel that has warnings, ktest.pl will fail the test when it sees the warning. If you need to test the the kernel and want to ignore the errors that are produced, the option IGNORE_ERRORS has been added. When IGNORE_ERRORS is set to something other than 0, it will ignore call traces due to WARN_ON(). Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-01-04 21:51:59 -05:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
ktest: Add manual bisect For both git bisect and config bisect, if BISECT_MANUAL is set to 1, then bisect will stop between iterations and ask the user for the result. The actual result is ignored. This makes it possible to use ktest.pl for bisecting configs and git and let the user examine the results themselves and enter their own results. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:22:39 -05:00
ktest: Add BISECT_SKIP If a during a git bisect, ktest fails on something other than what it is testing (if BISECT_TYPE is test but it fails on build), if BISECT_SKIP is set, then it will do a "git bisect skip" instead of just failing the bisect and letting the user find a good commit to test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:26:31 -05:00
ktest: Add CONFIG_BISECT_GOOD option Currently the config_bisect compares the min config with the CONFIG_BISECT config. There may be another config that we know is good that we want to ignore configs on. By passing in this config it will ignore the options that are set in the good config. Note: This only ignores the config, it does not (yet) handle options that are different between the two configs. If the good config has "SLAB" set and the bad config has "SLUB" it will not find the bug if the bug had to do with changing these two options. This is something that I intend to implement in the future. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:35:35 -04:00
ktest: Allow overriding bisect test results When running the ktest git bisect test, if the BISECT_TYPE is "test", the bisect is determined to be good or bad based off of the error code of the test that is run. Currently, if the test returns 0, it is considered a pass (good), a non-zero is considered a fail (bad). But it has been requested to add more options, and also change the meanings of the error codes of the test. For example, one may want the test to detect if the commit is not good or bad, (maybe the bisect came to a point where the code in question does not exist). The test could report an error code that should tell ktest to skip the commit. Also, a test could detect that something is horribly wrong and the biscet should just be aborted. The new options: BISECT_RET_GOOD BISECT_RET_BAD BISECT_RET_SKIP BISECT_RET_ABORT BISECT_RET_DEFAULT have been added. The first 4 take an integer value that will represent if the test should be considered a pass, fail, neither good nor bad, or abort respectively. The BISECT_RET_DEFAULT will bo whatever is not defined by the above codes. If only BISECT_RET_DEFAULT is defined, then all tests will do the default. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 12:43:57 -05:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Save test output The test output may contain useful information; save it along with the already-saved buildlog, dmesg, and .config. Link: http://lkml.kernel.org/r/1321616131-21352-1-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18 17:05:29 +05:30
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Reboot after each patchcheck run The patches being checked may not leave the kernel in a state that the next run will allow the new kernel to be copied to the machine. Reboot to a known good kernel before continuing to the next kernel to test. Added option PATCHCHECK_SLEEP_TIME for the max time to sleep between patchcheck reboots. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 09:18:18 -04:00
ktest: Add IGNORE_WARNINGS to ignore warnings in some patches Doing a patchcheck test, there may be warnings that gcc produces which may be OK, and the test should not fail on that commit. By adding a IGNORE_WARNINGS option to list a space delimited SHA1s that are ignored lets the user avoid having the test fail on certain commits. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:46:25 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Allow success logs to be stored Add a STORE_SUCCESSES option, to allow success logs to be stored, for example to double-check or otherwise post-process the test logs. Link: http://lkml.kernel.org/r/1321616131-21352-3-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18 17:05:31 +05:30
ktest: Add TEST_NAME option Searching through several tests, it gets confusing which test result is for which test. By adding the TEST_NAME option, the user can tell which test result belongs to which test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:38:48 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add detection of triple faults When a triple fault happens in a test, no call trace nor panic is displayed. Instead, the system reboots to the good kernel. Since the good kernel may display a boot prompt that matches the success string, ktest may think that the test succeeded, when it did not. Detecting triple faults is tricky because it is hard to generalize what a reboot looks like. The best that we can come up with for now is to examine the Linux banner. If we detect that the Linux banner matches the test we want to test, then look to see if we hit another Linux banner with a different kernel is booted. This can be assumed to be a triple fault. We can't just check for two Linux banners because things like early printk may cause the Linux banner to be displayed twice. Checking for different kernel versions should be the safe bet. If this for some reason detects a false triple boot. A new ktest config option is also created: DETECT_TRIPLE_FAULT This can be set to 0 to disable this checking. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:30:00 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot When ktest.pl reboots, it will usuall wait SLEEP_TIME seconds of idle console before starting the next test. By setting the REBOOT_SUCCESS_LINE, ktest will not wait SLEEP_TIME when it detects the line while rebooting to a new kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:00:23 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Added force stop after success and failure Added the options STOP_AFTER_SUCCESS and STOP_AFTER_FAILURE to allow the user to give a time (in seconds) to stop the monitor after a stack trace or login has been detected. Sometimes the kernel constantly prints out to the console and this may cause the test to run indefinitely. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-09 12:55:40 -05:00
ktest: Add STOP_TEST_AFTER to stop the test after a period of time Currently, if a test causes constant output but never reaches a boot prompt, or crashes, the test will never stop. Add STOP_TEST_AFTER to create a variable that will stop (and fail) the test after it has run for this amount of time. The default is 10 minutes. Setting this variable to -1 will disable it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:47:54 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Only ask options needed for install If all the tests are only for build or install, do not ask for options not needed to do the install, if the options do not exist. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-26 20:56:52 -05:00
ktest: Do not ask for some options if the only test is build When creating a ktest config or if te config only has build only tests, some of the manditory config options are not needed. Do not ask for them if all tests in the config file are just build tests. Suggested-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 15:58:00 -05:00
ktest: When creating a new config, ask for BUILD_OPTIONS When creating a new config, ask for the BUILD_OPTIONS variable that lets users add things like -j20 to the make. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 16:00:48 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Create variables for the ktest config files I found that I constantly reuse information for each test case. It would be nice to just define a variable to reuse. For example I may have: TEST_START [...] TEST = ssh root@mybox /path/to/my/script TEST_START [...] TEST = ssh root@mybox /path/to/my/script [etc] The issue is, I may wont to change that script or one of the other fields. Then I need to update each line individually. With the addition of config variables (variables only used during parsing the config) we can simplify the config files. These variables can also be defined multiple times and each time the new value will overwrite the old value. The convention to use a config variable over a ktest option is to use := instead of =. Now we could do: USER := root TARGET := mybox TEST_SCRIPT := /path/to/my/script TEST_CASE := ${USER}@${TARGET} ${TEST_SCRIPT} TEST_START [...] TEST = ${TEST_CASE} TEST_START [...] TEST = ${TEST_CASE} [etc] Now we just need to update the variables at the top. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 13:36:58 -04:00
ktest: Implement our own force min config Using the build KCONFIG_ALLCONFIG environment variable to force the min config may not always work properly. Since ktest is written in perl, it is trivial to read and replace the current config with the configs specified by the min config. Now the min config (and add configs) are read by perl and before a make is done, these configs in the .config file are replaced by the version in the min config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:40:58 -04:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Do not reboot on config or build issues Even if REBOOT_ON_ERROR is set, it becomes annoying that the target machine is rebooted when a config option is incorrect or a build fails. There's no reason to reboot the target for host only issues. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:12:20 -04:00
ktest: Fix reboot on success stopping all reboots The change to let individual tests decide to reboot the machine on success of the entire test also prevented errors from rebooting when an error was detected. The "no_reboot" variable was only cleared if the test had reboot_on_success set. But the no_reboot variable also prevents the test rebooting when an error was detected even when REBOOT_ON_ERROR was set. Add a new "reboot_success" variable that is used to determine if the test should reboot on success and not touch the no_reboot variable. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-01 08:20:12 -04:00
ktest: Detect typos in option names It becomes quite annoying when you go to run a test and then realize that you typed an option name wrong, and the test starts doing the default action and not what you expected it to do. It is even more annoying when you wake up the next day after running the test over night when you discover this. By testing if all options specified in a config file are used by either ktest or were used in one of the option's values we can see if there are any dangling options that were not used. In such a case, show the user the options that were not used and ask them if they want to continue or not. The option IGNORE_UNUSED was also added to allow the user to override this feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:37:22 -05:00
ktest: Add MIN_CONFIG_TYPE to allow making a minum .config that has network Add a MIN_CONFIG_TYPE that can be set to 'test' or 'boot'. The default is 'boot' which is what make_min_config has done previously: makes a config file that is the minimum needed to boot the target. But when MIN_CONFIG_TYPE is set to 'test', not only must the target boot, but it must also successfully run the TEST. This allows the creation of a config file that is the minimum to boot and also perform ssh to the target, or anything else a developer wants. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-21 17:13:40 -04:00
ktest: Add USE_OUTPUT_MIN_CONFIG to avoid prompt on make_min_config If the file that OUTPUT_MIN_CONFIG exists then ktest.pl will prompt the user and ask them if the OUTPUT_MIN_CONFIG should be used as the starting point for make_min_config instead of MIN_CONFIG. This is usually the case, and to allow the user to do so, which is helpful if the user is creating different min configs based on tests, and they know one is a superset of another test, they can set USE_OUTPUT_MIN_CONFIG to one, which will prevent kest.pl from prompting to use the OUTPUT_MIN_CONFIG and it will just use it. If USE_OUTPUT_MIN_CONIFG is set to zero, then ktest.pl will continue to use MIN_CONFIG instead. The default is that USE_OUTPUT_MIN_CONFIG is undefined. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-21 23:35:12 -04:00
ktest: Detect typos in option names It becomes quite annoying when you go to run a test and then realize that you typed an option name wrong, and the test starts doing the default action and not what you expected it to do. It is even more annoying when you wake up the next day after running the test over night when you discover this. By testing if all options specified in a config file are used by either ktest or were used in one of the option's values we can see if there are any dangling options that were not used. In such a case, show the user the options that were not used and ask them if they want to continue or not. The option IGNORE_UNUSED was also added to allow the user to override this feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:37:22 -05:00
ktest: Allow a test to override REBOOT_ON_SUCCESS The option REBOOT_ON_SUCCESS is global, and will have the machine reboot the the box if all tests are successful. But a test may not want the machine to reboot, and perhaps have the kernel it loaded be used to install the next kernel. Or the last test may set up a kernel that the user may want to look at. In this case, the user could have the global option REBOOT_ON_SUCCESS be true, but if a test is defined to run at the end, that test can override the global option and keep the kernel it installed for the user to log in with. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 11:18:27 -04:00
ktest: Detect typos in option names It becomes quite annoying when you go to run a test and then realize that you typed an option name wrong, and the test starts doing the default action and not what you expected it to do. It is even more annoying when you wake up the next day after running the test over night when you discover this. By testing if all options specified in a config file are used by either ktest or were used in one of the option's values we can see if there are any dangling options that were not used. In such a case, show the user the options that were not used and ask them if they want to continue or not. The option IGNORE_UNUSED was also added to allow the user to override this feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:37:22 -05:00
ktest: Add INGORE_ERRORS to ignore warnings in boot up When testing a kernel that has warnings, ktest.pl will fail the test when it sees the warning. If you need to test the the kernel and want to ignore the errors that are produced, the option IGNORE_ERRORS has been added. When IGNORE_ERRORS is set to something other than 0, it will ignore call traces due to WARN_ON(). Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-01-04 21:51:59 -05:00
ktest: Detect typos in option names It becomes quite annoying when you go to run a test and then realize that you typed an option name wrong, and the test starts doing the default action and not what you expected it to do. It is even more annoying when you wake up the next day after running the test over night when you discover this. By testing if all options specified in a config file are used by either ktest or were used in one of the option's values we can see if there are any dangling options that were not used. In such a case, show the user the options that were not used and ask them if they want to continue or not. The option IGNORE_UNUSED was also added to allow the user to override this feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:37:22 -05:00
ktest: Add SCP_TO_TARGET_INSTALL option Currently the option used to scp both the modules to the target as well as the kernel image are the same (SCP_TO_TARGET). But some embedded boards may require them to be different. The modules may need to be put directly on the board, but the kernel image may need to go to a tftpserver. Add the option SCP_TO_TARGET_INSTALL that will allow the user to change the config so that they may have the modules and image got to different machines. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:21:24 -04:00
ktest: Detect typos in option names It becomes quite annoying when you go to run a test and then realize that you typed an option name wrong, and the test starts doing the default action and not what you expected it to do. It is even more annoying when you wake up the next day after running the test over night when you discover this. By testing if all options specified in a config file are used by either ktest or were used in one of the option's values we can see if there are any dangling options that were not used. In such a case, show the user the options that were not used and ask them if they want to continue or not. The option IGNORE_UNUSED was also added to allow the user to override this feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:37:22 -05:00
ktest: Add variable ${PWD} Adding the variable ${PWD} that equals `pwd` makes the config files much simpler. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-22 09:07:03 -04:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Do not ask for some options if the only test is build When creating a ktest config or if te config only has build only tests, some of the manditory config options are not needed. Do not ask for them if all tests in the config file are just build tests. Suggested-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 15:58:00 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: When creating new config, allow the use of ${THIS_DIR} Typing in a full path when you know that the path exists within the directory your are running is tedious and unnecessary. Allow the user to use ${PWD} if they want a dynamic path name which will be the path that ktest.pl is executed from or use ${THIS_DIR} which is a variable assigned `pwd` and the the variable will exist within the config, allowing the user to change it and affect all other paths using this variable as well Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-21 20:39:33 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: When creating new config, allow the use of ${THIS_DIR} Typing in a full path when you know that the path exists within the directory your are running is tedious and unnecessary. Allow the user to use ${PWD} if they want a dynamic path name which will be the path that ktest.pl is executed from or use ${THIS_DIR} which is a variable assigned `pwd` and the the variable will exist within the config, allowing the user to change it and affect all other paths using this variable as well Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-21 20:39:33 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: When creating a new config, ask for BUILD_OPTIONS When creating a new config, ask for the BUILD_OPTIONS variable that lets users add things like -j20 to the make. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 16:00:48 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Allow bisect test to restart where it left off If a bisect is killed for some reason, have ktest detect that a bisect is in progress and if so, allow the user to start the bisect where it left off. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-22 20:48:57 -05:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Allow bisect test to restart where it left off If a bisect is killed for some reason, have ktest detect that a bisect is in progress and if so, allow the user to start the bisect where it left off. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-22 20:48:57 -05:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Allow bisect test to restart where it left off If a bisect is killed for some reason, have ktest detect that a bisect is in progress and if so, allow the user to start the bisect where it left off. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-22 20:48:57 -05:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Allow bisect test to restart where it left off If a bisect is killed for some reason, have ktest detect that a bisect is in progress and if so, allow the user to start the bisect where it left off. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-22 20:48:57 -05:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Allow bisect test to restart where it left off If a bisect is killed for some reason, have ktest detect that a bisect is in progress and if so, allow the user to start the bisect where it left off. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-22 20:48:57 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Evaluate variables entered on the command line When ktest.pl is called without any arguments, or if the config file does not exist, ktest.pl will ask the user for some information. Some of these questions are code paths. Allowing the user to type ${PWD} for the current directory greatly simplifies these entries. Add variable processing to the entered values. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-28 07:01:40 -04:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: When creating a new config, ask for BUILD_OPTIONS When creating a new config, ask for the BUILD_OPTIONS variable that lets users add things like -j20 to the make. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 16:00:48 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Evaluate variables entered on the command line When ktest.pl is called without any arguments, or if the config file does not exist, ktest.pl will ask the user for some information. Some of these questions are code paths. Allowing the user to type ${PWD} for the current directory greatly simplifies these entries. Add variable processing to the entered values. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-28 07:01:40 -04:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Evaluate variables entered on the command line When ktest.pl is called without any arguments, or if the config file does not exist, ktest.pl will ask the user for some information. Some of these questions are code paths. Allowing the user to type ${PWD} for the current directory greatly simplifies these entries. Add variable processing to the entered values. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-28 07:01:40 -04:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: When creating new config, allow the use of ${THIS_DIR} Typing in a full path when you know that the path exists within the directory your are running is tedious and unnecessary. Allow the user to use ${PWD} if they want a dynamic path name which will be the path that ktest.pl is executed from or use ${THIS_DIR} which is a variable assigned `pwd` and the the variable will exist within the config, allowing the user to change it and affect all other paths using this variable as well Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-21 20:39:33 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Do not ask for some options if the only test is build When creating a ktest config or if te config only has build only tests, some of the manditory config options are not needed. Do not ask for them if all tests in the config file are just build tests. Suggested-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 15:58:00 -05:00
ktest: When creating a new config, ask for BUILD_OPTIONS When creating a new config, ask for the BUILD_OPTIONS variable that lets users add things like -j20 to the make. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 16:00:48 -05:00
ktest: Do not ask for some options if the only test is build When creating a ktest config or if te config only has build only tests, some of the manditory config options are not needed. Do not ask for them if all tests in the config file are just build tests. Suggested-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 15:58:00 -05:00
ktest: Only ask options needed for install If all the tests are only for build or install, do not ask for options not needed to do the install, if the options do not exist. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-26 20:56:52 -05:00
ktest: Do not ask for some options if the only test is build When creating a ktest config or if te config only has build only tests, some of the manditory config options are not needed. Do not ask for them if all tests in the config file are just build tests. Suggested-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 15:58:00 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Do not ask for some options if the only test is build When creating a ktest config or if te config only has build only tests, some of the manditory config options are not needed. Do not ask for them if all tests in the config file are just build tests. Suggested-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 15:58:00 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Create variables for the ktest config files I found that I constantly reuse information for each test case. It would be nice to just define a variable to reuse. For example I may have: TEST_START [...] TEST = ssh root@mybox /path/to/my/script TEST_START [...] TEST = ssh root@mybox /path/to/my/script [etc] The issue is, I may wont to change that script or one of the other fields. Then I need to update each line individually. With the addition of config variables (variables only used during parsing the config) we can simplify the config files. These variables can also be defined multiple times and each time the new value will overwrite the old value. The convention to use a config variable over a ktest option is to use := instead of =. Now we could do: USER := root TARGET := mybox TEST_SCRIPT := /path/to/my/script TEST_CASE := ${USER}@${TARGET} ${TEST_SCRIPT} TEST_START [...] TEST = ${TEST_CASE} TEST_START [...] TEST = ${TEST_CASE} [etc] Now we just need to update the variables at the top. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 13:36:58 -04:00
ktest: Add processing of complex conditionals The IF statements for DEFAULTS and TEST_START sections now handle complex statements (&&,||) Example: TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17 11:36:44 -04:00
ktest: Create variables for the ktest config files I found that I constantly reuse information for each test case. It would be nice to just define a variable to reuse. For example I may have: TEST_START [...] TEST = ssh root@mybox /path/to/my/script TEST_START [...] TEST = ssh root@mybox /path/to/my/script [etc] The issue is, I may wont to change that script or one of the other fields. Then I need to update each line individually. With the addition of config variables (variables only used during parsing the config) we can simplify the config files. These variables can also be defined multiple times and each time the new value will overwrite the old value. The convention to use a config variable over a ktest option is to use := instead of =. Now we could do: USER := root TARGET := mybox TEST_SCRIPT := /path/to/my/script TEST_CASE := ${USER}@${TARGET} ${TEST_SCRIPT} TEST_START [...] TEST = ${TEST_CASE} TEST_START [...] TEST = ${TEST_CASE} [etc] Now we just need to update the variables at the top. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 13:36:58 -04:00
ktest: Add processing of complex conditionals The IF statements for DEFAULTS and TEST_START sections now handle complex statements (&&,||) Example: TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17 11:36:44 -04:00
ktest: Create variables for the ktest config files I found that I constantly reuse information for each test case. It would be nice to just define a variable to reuse. For example I may have: TEST_START [...] TEST = ssh root@mybox /path/to/my/script TEST_START [...] TEST = ssh root@mybox /path/to/my/script [etc] The issue is, I may wont to change that script or one of the other fields. Then I need to update each line individually. With the addition of config variables (variables only used during parsing the config) we can simplify the config files. These variables can also be defined multiple times and each time the new value will overwrite the old value. The convention to use a config variable over a ktest option is to use := instead of =. Now we could do: USER := root TARGET := mybox TEST_SCRIPT := /path/to/my/script TEST_CASE := ${USER}@${TARGET} ${TEST_SCRIPT} TEST_START [...] TEST = ${TEST_CASE} TEST_START [...] TEST = ${TEST_CASE} [etc] Now we just need to update the variables at the top. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 13:36:58 -04:00
ktest: Detect typos in option names It becomes quite annoying when you go to run a test and then realize that you typed an option name wrong, and the test starts doing the default action and not what you expected it to do. It is even more annoying when you wake up the next day after running the test over night when you discover this. By testing if all options specified in a config file are used by either ktest or were used in one of the option's values we can see if there are any dangling options that were not used. In such a case, show the user the options that were not used and ask them if they want to continue or not. The option IGNORE_UNUSED was also added to allow the user to override this feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:37:22 -05:00
ktest: Create variables for the ktest config files I found that I constantly reuse information for each test case. It would be nice to just define a variable to reuse. For example I may have: TEST_START [...] TEST = ssh root@mybox /path/to/my/script TEST_START [...] TEST = ssh root@mybox /path/to/my/script [etc] The issue is, I may wont to change that script or one of the other fields. Then I need to update each line individually. With the addition of config variables (variables only used during parsing the config) we can simplify the config files. These variables can also be defined multiple times and each time the new value will overwrite the old value. The convention to use a config variable over a ktest option is to use := instead of =. Now we could do: USER := root TARGET := mybox TEST_SCRIPT := /path/to/my/script TEST_CASE := ${USER}@${TARGET} ${TEST_SCRIPT} TEST_START [...] TEST = ${TEST_CASE} TEST_START [...] TEST = ${TEST_CASE} [etc] Now we just need to update the variables at the top. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 13:36:58 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Add OVERRIDE keyword to DEFAULTS section The OVERRIDE keyword will allow options defined in the given DEFAULTS section to override options defined in previous DEFAULT sections. Normally, options will error if they were previous defined. The OVERRIDE keyword allows options that have been previously defined to be changed in the given section. Note, the same option can not be defined in the same DEFAULT section even if that section is marked as OVERRIDE. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 22:14:21 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Evaluate options before processing them All options can take variables "${var}". Before doing any processing or decision making on the content of an option, evaluate it incase there are variables that may change the outcome. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 11:32:52 -05:00
ktest: Do not ask for some options if the only test is build When creating a ktest config or if te config only has build only tests, some of the manditory config options are not needed. Do not ask for them if all tests in the config file are just build tests. Suggested-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 15:58:00 -05:00
ktest: Evaluate options before processing them All options can take variables "${var}". Before doing any processing or decision making on the content of an option, evaluate it incase there are variables that may change the outcome. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 11:32:52 -05:00
ktest: Only ask options needed for install If all the tests are only for build or install, do not ask for options not needed to do the install, if the options do not exist. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-26 20:56:52 -05:00
ktest: Do not ask for some options if the only test is build When creating a ktest config or if te config only has build only tests, some of the manditory config options are not needed. Do not ask for them if all tests in the config file are just build tests. Suggested-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 15:58:00 -05:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Add OVERRIDE keyword to DEFAULTS section The OVERRIDE keyword will allow options defined in the given DEFAULTS section to override options defined in previous DEFAULT sections. Normally, options will error if they were previous defined. The OVERRIDE keyword allows options that have been previously defined to be changed in the given section. Note, the same option can not be defined in the same DEFAULT section even if that section is marked as OVERRIDE. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 22:14:21 -04:00
ktest: Evaluate options before processing them All options can take variables "${var}". Before doing any processing or decision making on the content of an option, evaluate it incase there are variables that may change the outcome. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 11:32:52 -05:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Allow a test case to undefine a default value Allow a test case in the config file to undefine a default value by specifying the option and equal sign but not assigning it a value: OPTION = Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 16:45:50 -05:00
ktest: Evaluate options before processing them All options can take variables "${var}". Before doing any processing or decision making on the content of an option, evaluate it incase there are variables that may change the outcome. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 11:32:52 -05:00
ktest: Allow a test case to undefine a default value Allow a test case in the config file to undefine a default value by specifying the option and equal sign but not assigning it a value: OPTION = Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 16:45:50 -05:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Create variables for the ktest config files I found that I constantly reuse information for each test case. It would be nice to just define a variable to reuse. For example I may have: TEST_START [...] TEST = ssh root@mybox /path/to/my/script TEST_START [...] TEST = ssh root@mybox /path/to/my/script [etc] The issue is, I may wont to change that script or one of the other fields. Then I need to update each line individually. With the addition of config variables (variables only used during parsing the config) we can simplify the config files. These variables can also be defined multiple times and each time the new value will overwrite the old value. The convention to use a config variable over a ktest option is to use := instead of =. Now we could do: USER := root TARGET := mybox TEST_SCRIPT := /path/to/my/script TEST_CASE := ${USER}@${TARGET} ${TEST_SCRIPT} TEST_START [...] TEST = ${TEST_CASE} TEST_START [...] TEST = ${TEST_CASE} [etc] Now we just need to update the variables at the top. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 13:36:58 -04:00
ktest: Let IF keyword take comparisons Allow ==, !=, <=, >=, <, and > to be used in IF statements to compare if a section should be processed or not. For example: BITS := 32 DEFAULTS IF ${BITS} == 32 MIN_CONFIG = ${CONFIG_DIR}/config-32 ELSE MIN_CONFIG = ${CONFIG_DIR}/config-64 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 20:24:07 -04:00
ktest: Add DEFINED keyword for IF statements Have IF statements process if a config variable or option has been defined or not. Can use NOT DEFINED in the case for telling if a variable or option has not been defined. DEFAULTS IF NOT DEFINED SSH_USER SSH_USER = root Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 22:41:14 -04:00
ktest: Add processing of complex conditionals The IF statements for DEFAULTS and TEST_START sections now handle complex statements (&&,||) Example: TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17 11:36:44 -04:00
ktest: Add IF and ELSE to config sections Add IF keyword to sections within the config. Also added an ELSE keyword that allows different config options to be set for a given section. For example: TYPE := 1 STATUS := 0 DEFAULTS IF ${TYPE} [...] ELSE IF ${STATUS} [...] ELSE [...] The above will process the first section as $TYPE is true. If it was false, it would process the last section as $STATUS is false. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 19:44:53 -04:00
ktest: Add processing of complex conditionals The IF statements for DEFAULTS and TEST_START sections now handle complex statements (&&,||) Example: TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17 11:36:44 -04:00
ktest: Add IF and ELSE to config sections Add IF keyword to sections within the config. Also added an ELSE keyword that allows different config options to be set for a given section. For example: TYPE := 1 STATUS := 0 DEFAULTS IF ${TYPE} [...] ELSE IF ${STATUS} [...] ELSE [...] The above will process the first section as $TYPE is true. If it was false, it would process the last section as $STATUS is false. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 19:44:53 -04:00
ktest: Let IF keyword take comparisons Allow ==, !=, <=, >=, <, and > to be used in IF statements to compare if a section should be processed or not. For example: BITS := 32 DEFAULTS IF ${BITS} == 32 MIN_CONFIG = ${CONFIG_DIR}/config-32 ELSE MIN_CONFIG = ${CONFIG_DIR}/config-64 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 20:24:07 -04:00
ktest: Add DEFINED keyword for IF statements Have IF statements process if a config variable or option has been defined or not. Can use NOT DEFINED in the case for telling if a variable or option has not been defined. DEFAULTS IF NOT DEFINED SSH_USER SSH_USER = root Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 22:41:14 -04:00
ktest: Add IF and ELSE to config sections Add IF keyword to sections within the config. Also added an ELSE keyword that allows different config options to be set for a given section. For example: TYPE := 1 STATUS := 0 DEFAULTS IF ${TYPE} [...] ELSE IF ${STATUS} [...] ELSE [...] The above will process the first section as $TYPE is true. If it was false, it would process the last section as $STATUS is false. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 19:44:53 -04:00
ktest: Add DEFINED keyword for IF statements Have IF statements process if a config variable or option has been defined or not. Can use NOT DEFINED in the case for telling if a variable or option has not been defined. DEFAULTS IF NOT DEFINED SSH_USER SSH_USER = root Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 22:41:14 -04:00
ktest: Add processing of complex conditionals The IF statements for DEFAULTS and TEST_START sections now handle complex statements (&&,||) Example: TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17 11:36:44 -04:00
ktest: Add IF and ELSE to config sections Add IF keyword to sections within the config. Also added an ELSE keyword that allows different config options to be set for a given section. For example: TYPE := 1 STATUS := 0 DEFAULTS IF ${TYPE} [...] ELSE IF ${STATUS} [...] ELSE [...] The above will process the first section as $TYPE is true. If it was false, it would process the last section as $STATUS is false. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 19:44:53 -04:00
ktest: Add INCLUDE keyword to include other config files Have the reading of the config file allow reading of other config files using the INCLUDE keyword. This allows multiple config files to share config options. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:00:00 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add INCLUDE keyword to include other config files Have the reading of the config file allow reading of other config files using the INCLUDE keyword. This allows multiple config files to share config options. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:00:00 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Add INCLUDE keyword to include other config files Have the reading of the config file allow reading of other config files using the INCLUDE keyword. This allows multiple config files to share config options. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:00:00 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Fix parsing of config section lines The order for some of the keywords on a section line (TEST_START or DEFAULTS) does not really matter. Simply need to remove the keyword from the line as we process it and evaluate the next keyword in the line. By removing the keywords as we find them, we do not need to keep track of where on the line they were found. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17 11:06:29 -04:00
ktest: Require one TEST_START in config file There has been too many times that I put in one too many SKIP TEST_STARTs and start the test with the default randconfig by accident that I added this to have ktest ask the user for which test they want to run if no TEST_START is specified. Now if I accidently start the test with all TEST_STARTs skipped, ktest asks what test do I want to run, and I now have a chance to kill it before it does a make mrproper on my build directory. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:51:37 -04:00
ktest: Add IF and ELSE to config sections Add IF keyword to sections within the config. Also added an ELSE keyword that allows different config options to be set for a given section. For example: TYPE := 1 STATUS := 0 DEFAULTS IF ${TYPE} [...] ELSE IF ${STATUS} [...] ELSE [...] The above will process the first section as $TYPE is true. If it was false, it would process the last section as $STATUS is false. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 19:44:53 -04:00
ktest: Add OVERRIDE keyword to DEFAULTS section The OVERRIDE keyword will allow options defined in the given DEFAULTS section to override options defined in previous DEFAULT sections. Normally, options will error if they were previous defined. The OVERRIDE keyword allows options that have been previously defined to be changed in the given section. Note, the same option can not be defined in the same DEFAULT section even if that section is marked as OVERRIDE. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 22:14:21 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Add INCLUDE keyword to include other config files Have the reading of the config file allow reading of other config files using the INCLUDE keyword. This allows multiple config files to share config options. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:00:00 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Consolidate TEST_TYPE and DEFAULT code The code that handles parsing the TEST_TYPE and DEFAULT code share a lot of common functionality. Combine the two and add a if statement that does what is different between them. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:10:30 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Consolidate TEST_TYPE and DEFAULT code The code that handles parsing the TEST_TYPE and DEFAULT code share a lot of common functionality. Combine the two and add a if statement that does what is different between them. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:10:30 -04:00
ktest: Fix parsing of config section lines The order for some of the keywords on a section line (TEST_START or DEFAULTS) does not really matter. Simply need to remove the keyword from the line as we process it and evaluate the next keyword in the line. By removing the keywords as we find them, we do not need to keep track of where on the line they were found. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17 11:06:29 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Consolidate TEST_TYPE and DEFAULT code The code that handles parsing the TEST_TYPE and DEFAULT code share a lot of common functionality. Combine the two and add a if statement that does what is different between them. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:10:30 -04:00
ktest: Add OVERRIDE keyword to DEFAULTS section The OVERRIDE keyword will allow options defined in the given DEFAULTS section to override options defined in previous DEFAULT sections. Normally, options will error if they were previous defined. The OVERRIDE keyword allows options that have been previously defined to be changed in the given section. Note, the same option can not be defined in the same DEFAULT section even if that section is marked as OVERRIDE. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 22:14:21 -04:00
ktest: Consolidate TEST_TYPE and DEFAULT code The code that handles parsing the TEST_TYPE and DEFAULT code share a lot of common functionality. Combine the two and add a if statement that does what is different between them. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:10:30 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Fix parsing of config section lines The order for some of the keywords on a section line (TEST_START or DEFAULTS) does not really matter. Simply need to remove the keyword from the line as we process it and evaluate the next keyword in the line. By removing the keywords as we find them, we do not need to keep track of where on the line they were found. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17 11:06:29 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Require one TEST_START in config file There has been too many times that I put in one too many SKIP TEST_STARTs and start the test with the default randconfig by accident that I added this to have ktest ask the user for which test they want to run if no TEST_START is specified. Now if I accidently start the test with all TEST_STARTs skipped, ktest asks what test do I want to run, and I now have a chance to kill it before it does a make mrproper on my build directory. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:51:37 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Fix parsing of config section lines The order for some of the keywords on a section line (TEST_START or DEFAULTS) does not really matter. Simply need to remove the keyword from the line as we process it and evaluate the next keyword in the line. By removing the keywords as we find them, we do not need to keep track of where on the line they were found. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17 11:06:29 -04:00
ktest: Add OVERRIDE keyword to DEFAULTS section The OVERRIDE keyword will allow options defined in the given DEFAULTS section to override options defined in previous DEFAULT sections. Normally, options will error if they were previous defined. The OVERRIDE keyword allows options that have been previously defined to be changed in the given section. Note, the same option can not be defined in the same DEFAULT section even if that section is marked as OVERRIDE. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 22:14:21 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Fix parsing of config section lines The order for some of the keywords on a section line (TEST_START or DEFAULTS) does not really matter. Simply need to remove the keyword from the line as we process it and evaluate the next keyword in the line. By removing the keywords as we find them, we do not need to keep track of where on the line they were found. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17 11:06:29 -04:00
ktest: Add IF and ELSE to config sections Add IF keyword to sections within the config. Also added an ELSE keyword that allows different config options to be set for a given section. For example: TYPE := 1 STATUS := 0 DEFAULTS IF ${TYPE} [...] ELSE IF ${STATUS} [...] ELSE [...] The above will process the first section as $TYPE is true. If it was false, it would process the last section as $STATUS is false. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 19:44:53 -04:00
ktest: Fix parsing of config section lines The order for some of the keywords on a section line (TEST_START or DEFAULTS) does not really matter. Simply need to remove the keyword from the line as we process it and evaluate the next keyword in the line. By removing the keywords as we find them, we do not need to keep track of where on the line they were found. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17 11:06:29 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Fix parsing of config section lines The order for some of the keywords on a section line (TEST_START or DEFAULTS) does not really matter. Simply need to remove the keyword from the line as we process it and evaluate the next keyword in the line. By removing the keywords as we find them, we do not need to keep track of where on the line they were found. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17 11:06:29 -04:00
ktest: Consolidate TEST_TYPE and DEFAULT code The code that handles parsing the TEST_TYPE and DEFAULT code share a lot of common functionality. Combine the two and add a if statement that does what is different between them. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:10:30 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Consolidate TEST_TYPE and DEFAULT code The code that handles parsing the TEST_TYPE and DEFAULT code share a lot of common functionality. Combine the two and add a if statement that does what is different between them. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:10:30 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Let IF keyword take comparisons Allow ==, !=, <=, >=, <, and > to be used in IF statements to compare if a section should be processed or not. For example: BITS := 32 DEFAULTS IF ${BITS} == 32 MIN_CONFIG = ${CONFIG_DIR}/config-32 ELSE MIN_CONFIG = ${CONFIG_DIR}/config-64 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 20:24:07 -04:00
ktest: Add IF and ELSE to config sections Add IF keyword to sections within the config. Also added an ELSE keyword that allows different config options to be set for a given section. For example: TYPE := 1 STATUS := 0 DEFAULTS IF ${TYPE} [...] ELSE IF ${STATUS} [...] ELSE [...] The above will process the first section as $TYPE is true. If it was false, it would process the last section as $STATUS is false. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 19:44:53 -04:00
ktest: Let IF keyword take comparisons Allow ==, !=, <=, >=, <, and > to be used in IF statements to compare if a section should be processed or not. For example: BITS := 32 DEFAULTS IF ${BITS} == 32 MIN_CONFIG = ${CONFIG_DIR}/config-32 ELSE MIN_CONFIG = ${CONFIG_DIR}/config-64 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 20:24:07 -04:00
ktest: Add IF and ELSE to config sections Add IF keyword to sections within the config. Also added an ELSE keyword that allows different config options to be set for a given section. For example: TYPE := 1 STATUS := 0 DEFAULTS IF ${TYPE} [...] ELSE IF ${STATUS} [...] ELSE [...] The above will process the first section as $TYPE is true. If it was false, it would process the last section as $STATUS is false. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 19:44:53 -04:00
ktest: Let IF keyword take comparisons Allow ==, !=, <=, >=, <, and > to be used in IF statements to compare if a section should be processed or not. For example: BITS := 32 DEFAULTS IF ${BITS} == 32 MIN_CONFIG = ${CONFIG_DIR}/config-32 ELSE MIN_CONFIG = ${CONFIG_DIR}/config-64 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 20:24:07 -04:00
ktest: Add IF and ELSE to config sections Add IF keyword to sections within the config. Also added an ELSE keyword that allows different config options to be set for a given section. For example: TYPE := 1 STATUS := 0 DEFAULTS IF ${TYPE} [...] ELSE IF ${STATUS} [...] ELSE [...] The above will process the first section as $TYPE is true. If it was false, it would process the last section as $STATUS is false. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 19:44:53 -04:00
ktest: Let IF keyword take comparisons Allow ==, !=, <=, >=, <, and > to be used in IF statements to compare if a section should be processed or not. For example: BITS := 32 DEFAULTS IF ${BITS} == 32 MIN_CONFIG = ${CONFIG_DIR}/config-32 ELSE MIN_CONFIG = ${CONFIG_DIR}/config-64 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 20:24:07 -04:00
ktest: Add IF and ELSE to config sections Add IF keyword to sections within the config. Also added an ELSE keyword that allows different config options to be set for a given section. For example: TYPE := 1 STATUS := 0 DEFAULTS IF ${TYPE} [...] ELSE IF ${STATUS} [...] ELSE [...] The above will process the first section as $TYPE is true. If it was false, it would process the last section as $STATUS is false. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 19:44:53 -04:00
ktest: Let IF keyword take comparisons Allow ==, !=, <=, >=, <, and > to be used in IF statements to compare if a section should be processed or not. For example: BITS := 32 DEFAULTS IF ${BITS} == 32 MIN_CONFIG = ${CONFIG_DIR}/config-32 ELSE MIN_CONFIG = ${CONFIG_DIR}/config-64 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 20:24:07 -04:00
ktest: Add INCLUDE keyword to include other config files Have the reading of the config file allow reading of other config files using the INCLUDE keyword. This allows multiple config files to share config options. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:00:00 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Add OVERRIDE keyword to DEFAULTS section The OVERRIDE keyword will allow options defined in the given DEFAULTS section to override options defined in previous DEFAULT sections. Normally, options will error if they were previous defined. The OVERRIDE keyword allows options that have been previously defined to be changed in the given section. Note, the same option can not be defined in the same DEFAULT section even if that section is marked as OVERRIDE. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 22:14:21 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Add OVERRIDE keyword to DEFAULTS section The OVERRIDE keyword will allow options defined in the given DEFAULTS section to override options defined in previous DEFAULT sections. Normally, options will error if they were previous defined. The OVERRIDE keyword allows options that have been previously defined to be changed in the given section. Note, the same option can not be defined in the same DEFAULT section even if that section is marked as OVERRIDE. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 22:14:21 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Create variables for the ktest config files I found that I constantly reuse information for each test case. It would be nice to just define a variable to reuse. For example I may have: TEST_START [...] TEST = ssh root@mybox /path/to/my/script TEST_START [...] TEST = ssh root@mybox /path/to/my/script [etc] The issue is, I may wont to change that script or one of the other fields. Then I need to update each line individually. With the addition of config variables (variables only used during parsing the config) we can simplify the config files. These variables can also be defined multiple times and each time the new value will overwrite the old value. The convention to use a config variable over a ktest option is to use := instead of =. Now we could do: USER := root TARGET := mybox TEST_SCRIPT := /path/to/my/script TEST_CASE := ${USER}@${TARGET} ${TEST_SCRIPT} TEST_START [...] TEST = ${TEST_CASE} TEST_START [...] TEST = ${TEST_CASE} [etc] Now we just need to update the variables at the top. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 13:36:58 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Add INCLUDE keyword to include other config files Have the reading of the config file allow reading of other config files using the INCLUDE keyword. This allows multiple config files to share config options. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:00:00 -04:00
ktest: Ask for type of test when creating a new config When no argument is supplied to ktest, or the config applied does not exist and a new config is being created, instead of just using the default test type, give the user an option to pick the test type of either 'build, install, or boot'. Other options may be added later but then those would require more questions as they require more fields. But that's for another release of ktest to add that feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 13:41:18 -05:00
ktest: Add INCLUDE keyword to include other config files Have the reading of the config file allow reading of other config files using the INCLUDE keyword. This allows multiple config files to share config options. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 21:00:00 -04:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Require one TEST_START in config file There has been too many times that I put in one too many SKIP TEST_STARTs and start the test with the default randconfig by accident that I added this to have ktest ask the user for which test they want to run if no TEST_START is specified. Now if I accidently start the test with all TEST_STARTs skipped, ktest asks what test do I want to run, and I now have a chance to kill it before it does a make mrproper on my build directory. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:51:37 -04:00
ktest: Ask for type of test when creating a new config When no argument is supplied to ktest, or the config applied does not exist and a new config is being created, instead of just using the default test type, give the user an option to pick the test type of either 'build, install, or boot'. Other options may be added later but then those would require more questions as they require more fields. But that's for another release of ktest to add that feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 13:41:18 -05:00
ktest: Require one TEST_START in config file There has been too many times that I put in one too many SKIP TEST_STARTs and start the test with the default randconfig by accident that I added this to have ktest ask the user for which test they want to run if no TEST_START is specified. Now if I accidently start the test with all TEST_STARTs skipped, ktest asks what test do I want to run, and I now have a chance to kill it before it does a make mrproper on my build directory. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:51:37 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Detect typos in option names It becomes quite annoying when you go to run a test and then realize that you typed an option name wrong, and the test starts doing the default action and not what you expected it to do. It is even more annoying when you wake up the next day after running the test over night when you discover this. By testing if all options specified in a config file are used by either ktest or were used in one of the option's values we can see if there are any dangling options that were not used. In such a case, show the user the options that were not used and ask them if they want to continue or not. The option IGNORE_UNUSED was also added to allow the user to override this feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:37:22 -05:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Have LOG_FILE evaluate options as well The LOG_FILE variable needs to evaluate the $ options as well. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 11:03:34 -04:00
ktest: Check parent options for iterated tests Let's say we have "OUTPUT_DIR = build/${TEST_NAME}", and we're iterating a test. In the second iteration of a test, the TEST_NAME of the test we're repeating is not used. Instead, ${TEST_NAME} appears literally: touch /home/rabin/kernel/test/build/${TEST_NAME}/.config ... SUCCESS Fix this by making __eval_option() check the parent test options for a repeated test. Link: http://lkml.kernel.org/r/1321616131-21352-2-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18 17:05:30 +05:30
ktest: Have LOG_FILE evaluate options as well The LOG_FILE variable needs to evaluate the $ options as well. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 11:03:34 -04:00
ktest: Check parent options for iterated tests Let's say we have "OUTPUT_DIR = build/${TEST_NAME}", and we're iterating a test. In the second iteration of a test, the TEST_NAME of the test we're repeating is not used. Instead, ${TEST_NAME} appears literally: touch /home/rabin/kernel/test/build/${TEST_NAME}/.config ... SUCCESS Fix this by making __eval_option() check the parent test options for a repeated test. Link: http://lkml.kernel.org/r/1321616131-21352-2-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18 17:05:30 +05:30
ktest: Have LOG_FILE evaluate options as well The LOG_FILE variable needs to evaluate the $ options as well. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 11:03:34 -04:00
ktest: Check parent options for iterated tests Let's say we have "OUTPUT_DIR = build/${TEST_NAME}", and we're iterating a test. In the second iteration of a test, the TEST_NAME of the test we're repeating is not used. Instead, ${TEST_NAME} appears literally: touch /home/rabin/kernel/test/build/${TEST_NAME}/.config ... SUCCESS Fix this by making __eval_option() check the parent test options for a repeated test. Link: http://lkml.kernel.org/r/1321616131-21352-2-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18 17:05:30 +05:30
ktest: Have LOG_FILE evaluate options as well The LOG_FILE variable needs to evaluate the $ options as well. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 11:03:34 -04:00
ktest: Write to stdout if no log file is given If no LOG_FILE option is set, then write what would be logged to that file to standard output. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 16:39:57 -05:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Write to stdout if no log file is given If no LOG_FILE option is set, then write what would be logged to that file to standard output. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 16:39:57 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Write to stdout if no log file is given If no LOG_FILE option is set, then write what would be logged to that file to standard output. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 16:39:57 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Include monitor in reboot code Several places that call reboot do the same thing with respect to the monitor. By adding this code into the reboot code, redundant code is removed and it paves the way for the the reset time patch. Signed-off-by: Andrew Jones <drjones@redhat.com> Link: http://lkml.kernel.org/r/1313155932-20092-4-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-12 15:32:05 +02:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Include monitor in reboot code Several places that call reboot do the same thing with respect to the monitor. By adding this code into the reboot code, redundant code is removed and it paves the way for the the reset time patch. Signed-off-by: Andrew Jones <drjones@redhat.com> Link: http://lkml.kernel.org/r/1313155932-20092-4-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-12 15:32:05 +02:00
ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot When ktest.pl reboots, it will usuall wait SLEEP_TIME seconds of idle console before starting the next test. By setting the REBOOT_SUCCESS_LINE, ktest will not wait SLEEP_TIME when it detects the line while rebooting to a new kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:00:23 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Include monitor in reboot code Several places that call reboot do the same thing with respect to the monitor. By adding this code into the reboot code, redundant code is removed and it paves the way for the the reset time patch. Signed-off-by: Andrew Jones <drjones@redhat.com> Link: http://lkml.kernel.org/r/1313155932-20092-4-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-12 15:32:05 +02:00
ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot When ktest.pl reboots, it will usuall wait SLEEP_TIME seconds of idle console before starting the next test. By setting the REBOOT_SUCCESS_LINE, ktest will not wait SLEEP_TIME when it detects the line while rebooting to a new kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:00:23 -04:00
ktest: Include monitor in reboot code Several places that call reboot do the same thing with respect to the monitor. By adding this code into the reboot code, redundant code is removed and it paves the way for the the reset time patch. Signed-off-by: Andrew Jones <drjones@redhat.com> Link: http://lkml.kernel.org/r/1313155932-20092-4-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-12 15:32:05 +02:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST For machines that do no use grub, it may be needed to update an external image (tftp) before doing a reboot into either the test image or the known good image. The option SWITCH_TO_GOOD is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into a known good image. The option SWITCH_TO_TEST is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into the test image. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 16:29:10 -05:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: Do not reboot on config or build issues Even if REBOOT_ON_ERROR is set, it becomes annoying that the target machine is rebooted when a config option is incorrect or a build fails. There's no reason to reboot the target for host only issues. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:12:20 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST For machines that do no use grub, it may be needed to update an external image (tftp) before doing a reboot into either the test image or the known good image. The option SWITCH_TO_GOOD is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into a known good image. The option SWITCH_TO_TEST is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into the test image. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 16:29:10 -05:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: Print logfile name on failure If the test fails and a logfile was specified. Print the name to let the user know where to look for more information on the failure. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-07 13:18:47 -05:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot When ktest.pl reboots, it will usuall wait SLEEP_TIME seconds of idle console before starting the next test. By setting the REBOOT_SUCCESS_LINE, ktest will not wait SLEEP_TIME when it detects the line while rebooting to a new kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:00:23 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot When ktest.pl reboots, it will usuall wait SLEEP_TIME seconds of idle console before starting the next test. By setting the REBOOT_SUCCESS_LINE, ktest will not wait SLEEP_TIME when it detects the line while rebooting to a new kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:00:23 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot When ktest.pl reboots, it will usuall wait SLEEP_TIME seconds of idle console before starting the next test. By setting the REBOOT_SUCCESS_LINE, ktest will not wait SLEEP_TIME when it detects the line while rebooting to a new kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:00:23 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot When ktest.pl reboots, it will usuall wait SLEEP_TIME seconds of idle console before starting the next test. By setting the REBOOT_SUCCESS_LINE, ktest will not wait SLEEP_TIME when it detects the line while rebooting to a new kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:00:23 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Allow success logs to be stored Add a STORE_SUCCESSES option, to allow success logs to be stored, for example to double-check or otherwise post-process the test logs. Link: http://lkml.kernel.org/r/1321616131-21352-3-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18 17:05:31 +05:30
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST For machines that do no use grub, it may be needed to update an external image (tftp) before doing a reboot into either the test image or the known good image. The option SWITCH_TO_GOOD is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into a known good image. The option SWITCH_TO_TEST is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into the test image. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 16:29:10 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Add TEST_NAME option Searching through several tests, it gets confusing which test result is for which test. By adding the TEST_NAME option, the user can tell which test result belongs to which test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:38:48 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: Add TEST_NAME option Searching through several tests, it gets confusing which test result is for which test. By adding the TEST_NAME option, the user can tell which test result belongs to which test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:38:48 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Allow success logs to be stored Add a STORE_SUCCESSES option, to allow success logs to be stored, for example to double-check or otherwise post-process the test logs. Link: http://lkml.kernel.org/r/1321616131-21352-3-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18 17:05:31 +05:30
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Add SCP_TO_TARGET_INSTALL option Currently the option used to scp both the modules to the target as well as the kernel image are the same (SCP_TO_TARGET). But some embedded boards may require them to be different. The modules may need to be put directly on the board, but the kernel image may need to go to a tftpserver. Add the option SCP_TO_TARGET_INSTALL that will allow the user to change the config so that they may have the modules and image got to different machines. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:21:24 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Add SCP_TO_TARGET_INSTALL option Currently the option used to scp both the modules to the target as well as the kernel image are the same (SCP_TO_TARGET). But some embedded boards may require them to be different. The modules may need to be put directly on the board, but the kernel image may need to go to a tftpserver. Add the option SCP_TO_TARGET_INSTALL that will allow the user to change the config so that they may have the modules and image got to different machines. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:21:24 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Fail when grub menu not found Currently if the grub menu that is supplied is not found, it will just boot into the last grub menu in menu.lst. Fail instead of confusing the user why their kernel is not booting. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-14 17:20:39 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Fail when grub menu not found Currently if the grub menu that is supplied is not found, it will just boot into the last grub menu in menu.lst. Fail instead of confusing the user why their kernel is not booting. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-14 17:20:39 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Fail when grub menu not found Currently if the grub menu that is supplied is not found, it will just boot into the last grub menu in menu.lst. Fail instead of confusing the user why their kernel is not booting. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-14 17:20:39 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST For machines that do no use grub, it may be needed to update an external image (tftp) before doing a reboot into either the test image or the known good image. The option SWITCH_TO_GOOD is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into a known good image. The option SWITCH_TO_TEST is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into the test image. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 16:29:10 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Do not opencode reboot in grub setting When setting the next kernel to boot to with grub, do not opencode the reboot operation. The normal reboot operation can be modified by config options (namely POWERCYCLE_AFTER_REBOOT). This needs to affect all reboots. Remove the opencoded reboot to make sure that any changes to the reboot code also affect all reboots. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-20 09:56:41 -04:00
ktest: Still do reboot even for REBOOT_TYPE = script The REBOOT_TYPE may be either grub or script, if it is script it is expected that a REBOOT_SCRIPT is defined. With the SWITCH_TO_TEST which is the complement of SWITCH_TO_GOOD, which does basically the same thing as REBOOT_SCRIPT and but for both grub and script, the REBOOT_SCRIPT does not need to be mandatory anymore. Do not require the REBOOT_SCRIPT and always run the reboot code for both grub and script. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-23 00:24:51 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Still do reboot even for REBOOT_TYPE = script The REBOOT_TYPE may be either grub or script, if it is script it is expected that a REBOOT_SCRIPT is defined. With the SWITCH_TO_TEST which is the complement of SWITCH_TO_GOOD, which does basically the same thing as REBOOT_SCRIPT and but for both grub and script, the REBOOT_SCRIPT does not need to be mandatory anymore. Do not require the REBOOT_SCRIPT and always run the reboot code for both grub and script. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-23 00:24:51 -05:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add warning when bugs are ignored When IGNORE_ERRORS is set, ktest will not fail a test if a backtrace is detected. But this can be an issue if the user added it in the config but forgot to remove it. They may be left wondering why their test did not fail, or even worse, why their bisect gave the wrong commit. Add a warning in the output if IGNORE_WARNINGS is set, and ktest detects a kernel error. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:18:35 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Added force stop after success and failure Added the options STOP_AFTER_SUCCESS and STOP_AFTER_FAILURE to allow the user to give a time (in seconds) to stop the monitor after a stack trace or login has been detected. Sometimes the kernel constantly prints out to the console and this may cause the test to run indefinitely. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-09 12:55:40 -05:00
ktest: Add STOP_TEST_AFTER to stop the test after a period of time Currently, if a test causes constant output but never reaches a boot prompt, or crashes, the test will never stop. Add STOP_TEST_AFTER to create a variable that will stop (and fail) the test after it has run for this amount of time. The default is 10 minutes. Setting this variable to -1 will disable it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:47:54 -05:00
ktest: Add detection of triple faults When a triple fault happens in a test, no call trace nor panic is displayed. Instead, the system reboots to the good kernel. Since the good kernel may display a boot prompt that matches the success string, ktest may think that the test succeeded, when it did not. Detecting triple faults is tricky because it is hard to generalize what a reboot looks like. The best that we can come up with for now is to examine the Linux banner. If we detect that the Linux banner matches the test we want to test, then look to see if we hit another Linux banner with a different kernel is booted. This can be assumed to be a triple fault. We can't just check for two Linux banners because things like early printk may cause the Linux banner to be displayed twice. Checking for different kernel versions should be the safe bet. If this for some reason detects a false triple boot. A new ktest config option is also created: DETECT_TRIPLE_FAULT This can be set to 0 to disable this checking. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:30:00 -04:00
ktest: Added force stop after success and failure Added the options STOP_AFTER_SUCCESS and STOP_AFTER_FAILURE to allow the user to give a time (in seconds) to stop the monitor after a stack trace or login has been detected. Sometimes the kernel constantly prints out to the console and this may cause the test to run indefinitely. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-09 12:55:40 -05:00
ktest: Add STOP_TEST_AFTER to stop the test after a period of time Currently, if a test causes constant output but never reaches a boot prompt, or crashes, the test will never stop. Add STOP_TEST_AFTER to create a variable that will stop (and fail) the test after it has run for this amount of time. The default is 10 minutes. Setting this variable to -1 will disable it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:47:54 -05:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Have wait on stdio honor bug timeout After a bug is found, the STOP_AFTER_FAILURE timeout is used to determine how much output should be printed before breaking out of the monitor loop. This is to get things like call traces and enough infromation about the bug to help determine what caused it. The STOP_AFTER_FAILURE is usually much shorter than the TIMEOUT that is used to determine when to quit after no more stdio is given. But since the stdio read uses a wait on I/O, the STOP_AFTER_FAILURE is only checked after we get something from I/O. But if the I/O does not return any more data, we wait the TIMEOUT period instead, even though we already triggered a bug report. The wait on I/O should honor the STOP_AFTER_FAILURE time if a bug has been found. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:48:10 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Notify reason to break out of monitoring boot Different timeouts can cause the ktest monitor to break out of the loop. It becomes annoying that one does not know the reason why it exited the monitor loop. Display the cause of the reason why the loop was exited. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:26:27 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Notify reason to break out of monitoring boot Different timeouts can cause the ktest monitor to break out of the loop. It becomes annoying that one does not know the reason why it exited the monitor loop. Display the cause of the reason why the loop was exited. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:26:27 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Added force stop after success and failure Added the options STOP_AFTER_SUCCESS and STOP_AFTER_FAILURE to allow the user to give a time (in seconds) to stop the monitor after a stack trace or login has been detected. Sometimes the kernel constantly prints out to the console and this may cause the test to run indefinitely. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-09 12:55:40 -05:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add warning when bugs are ignored When IGNORE_ERRORS is set, ktest will not fail a test if a backtrace is detected. But this can be an issue if the user added it in the config but forgot to remove it. They may be left wondering why their test did not fail, or even worse, why their bisect gave the wrong commit. Add a warning in the output if IGNORE_WARNINGS is set, and ktest detects a kernel error. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:18:35 -04:00
ktest: Added force stop after success and failure Added the options STOP_AFTER_SUCCESS and STOP_AFTER_FAILURE to allow the user to give a time (in seconds) to stop the monitor after a stack trace or login has been detected. Sometimes the kernel constantly prints out to the console and this may cause the test to run indefinitely. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-09 12:55:40 -05:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Start failure timeout on panic too Currently we just look for a Call Trace to start the time out when to reboot the box. But if the kernel panics and does not show a Call Trace, the test will not reboot the box after the specified timeout. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-07 13:21:00 -05:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add detection of triple faults When a triple fault happens in a test, no call trace nor panic is displayed. Instead, the system reboots to the good kernel. Since the good kernel may display a boot prompt that matches the success string, ktest may think that the test succeeded, when it did not. Detecting triple faults is tricky because it is hard to generalize what a reboot looks like. The best that we can come up with for now is to examine the Linux banner. If we detect that the Linux banner matches the test we want to test, then look to see if we hit another Linux banner with a different kernel is booted. This can be assumed to be a triple fault. We can't just check for two Linux banners because things like early printk may cause the Linux banner to be displayed twice. Checking for different kernel versions should be the safe bet. If this for some reason detects a false triple boot. A new ktest config option is also created: DETECT_TRIPLE_FAULT This can be set to 0 to disable this checking. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:30:00 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add STOP_TEST_AFTER to stop the test after a period of time Currently, if a test causes constant output but never reaches a boot prompt, or crashes, the test will never stop. Add STOP_TEST_AFTER to create a variable that will stop (and fail) the test after it has run for this amount of time. The default is 10 minutes. Setting this variable to -1 will disable it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:47:54 -05:00
ktest: If test failed due to timeout, print that If the test failed due to timeout for boot, print a message saying so. Otherwise the user will be confused to why their test just failed. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 09:14:35 -04:00
ktest: Add STOP_TEST_AFTER to stop the test after a period of time Currently, if a test causes constant output but never reaches a boot prompt, or crashes, the test will never stop. Add STOP_TEST_AFTER to create a variable that will stop (and fail) the test after it has run for this amount of time. The default is 10 minutes. Setting this variable to -1 will disable it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:47:54 -05:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add warning when bugs are ignored When IGNORE_ERRORS is set, ktest will not fail a test if a backtrace is detected. But this can be an issue if the user added it in the config but forgot to remove it. They may be left wondering why their test did not fail, or even worse, why their bisect gave the wrong commit. Add a warning in the output if IGNORE_WARNINGS is set, and ktest detects a kernel error. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:18:35 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Evaluate $KERNEL_VERSION in both install and post install The install process may also need to know what the kernel version is, to add it to the name. Evaluate it for both install and post install. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 11:25:46 -05:00
ktest: Allow initrd processing without modules defined When a config is set with CONFIG_MODULES=n, it does not mean that the kernel does not need an initrd to boot. For systems that depend on LVM and such, an initrd must run first. If POST_INSTALL is defined, then run the post install regardless if modules are needed or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 11:09:22 -04:00
ktest: Evaluate $KERNEL_VERSION in both install and post install The install process may also need to know what the kernel version is, to add it to the name. Evaluate it for both install and post install. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 11:25:46 -05:00
ktest: Allow initrd processing without modules defined When a config is set with CONFIG_MODULES=n, it does not mean that the kernel does not need an initrd to boot. For systems that depend on LVM and such, an initrd must run first. If POST_INSTALL is defined, then run the post install regardless if modules are needed or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 11:09:22 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add NO_INSTALL option to not install for a test There's cases where running the same kernel over and over again is useful, and being able to not install the same kernel can save time between tests. Add a NO_INSTALL option that tells ktest.pl to not install the new kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 17:50:48 -04:00
ktest: Evaluate $KERNEL_VERSION in both install and post install The install process may also need to know what the kernel version is, to add it to the name. Evaluate it for both install and post install. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 11:25:46 -05:00
ktest: Add SCP_TO_TARGET_INSTALL option Currently the option used to scp both the modules to the target as well as the kernel image are the same (SCP_TO_TARGET). But some embedded boards may require them to be different. The modules may need to be put directly on the board, but the kernel image may need to go to a tftpserver. Add the option SCP_TO_TARGET_INSTALL that will allow the user to change the config so that they may have the modules and image got to different machines. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:21:24 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Use $output_config instead of typing $outputdir/.config To help prevent typos, use $output_config as the reference to "$outputdir/.config". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 16:43:21 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Allow initrd processing without modules defined When a config is set with CONFIG_MODULES=n, it does not mean that the kernel does not need an initrd to boot. For systems that depend on LVM and such, an initrd must run first. If POST_INSTALL is defined, then run the post install regardless if modules are needed or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 11:09:22 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add INSTALL_MOD_STRIP=1 when installing modules To keep the modules from bloating the target's filesystem strip them during the install. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:16:15 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Add SCP_TO_TARGET_INSTALL option Currently the option used to scp both the modules to the target as well as the kernel image are the same (SCP_TO_TARGET). But some embedded boards may require them to be different. The modules may need to be put directly on the board, but the kernel image may need to go to a tftpserver. Add the option SCP_TO_TARGET_INSTALL that will allow the user to change the config so that they may have the modules and image got to different machines. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:21:24 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Fix tar extracting of modules to target The tar command to create the module directory is cjf, but the extraction only had xf. This works on most versions of tar, but some versions of tar require xjf for extraction as well. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:44:36 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Add POST_INSTALL to allow initrds to be created Add a POST_INSTALL option that runs after the build and install but before rebooting to the test kernel. This alls the user to run a script that will install an initrd (or anything else that may be special) before booting. An environment variable KERNEL_VERSION is set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:33 -04:00
ktest: Allow initrd processing without modules defined When a config is set with CONFIG_MODULES=n, it does not mean that the kernel does not need an initrd to boot. For systems that depend on LVM and such, an initrd must run first. If POST_INSTALL is defined, then run the post install regardless if modules are needed or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 11:09:22 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add helper function to avoid duplicate code Several places had the following code: get_grub_index; get_version; install; start_monitor; return monitor; Creating a function "start_monitor_and_boot()" replaces these mulitple uses with a single call. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:49:13 -04:00
ktest: Fix kernelrevision with POST_BUILD The PRE_BUILD and POST_BUILD options of ktest are added to allow the user to add temporary patch to the system and remove it on builds. This is sometimes use to take a change from another git branch and add it to a series without the fix so that this series can be tested, when an unrelated bug exists in the series. The problem comes when a tagged commit is being used. For example, if v3.2 is being tested, and we add a patch to it, the kernelrelease for that commit will be 3.2.0+, but without the patch the version will be 3.2.0. This can cause problems when the kernelrelease is determined for creating the /lib/modules directory. The kernel booting has the '+' but the module directory will not, and the modules will be missing for that boot, and may not allow the kernel to succeed. The fix is to put the creation of the kernelrelease in the POST_BUILD logic, before it applies the POST_BUILD operation. The POST_BUILD is where the patch may be removed, removing the '+' from the kernelrelease. The calculation of the kernelrelease will also stay in its current location but will be ignored if it was already calculated previously. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-18 13:34:35 -04:00
ktest: Add helper function to avoid duplicate code Several places had the following code: get_grub_index; get_version; install; start_monitor; return monitor; Creating a function "start_monitor_and_boot()" replaces these mulitple uses with a single call. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:49:13 -04:00
ktest: Fix kernelrevision with POST_BUILD The PRE_BUILD and POST_BUILD options of ktest are added to allow the user to add temporary patch to the system and remove it on builds. This is sometimes use to take a change from another git branch and add it to a series without the fix so that this series can be tested, when an unrelated bug exists in the series. The problem comes when a tagged commit is being used. For example, if v3.2 is being tested, and we add a patch to it, the kernelrelease for that commit will be 3.2.0+, but without the patch the version will be 3.2.0. This can cause problems when the kernelrelease is determined for creating the /lib/modules directory. The kernel booting has the '+' but the module directory will not, and the modules will be missing for that boot, and may not allow the kernel to succeed. The fix is to put the creation of the kernelrelease in the POST_BUILD logic, before it applies the POST_BUILD operation. The POST_BUILD is where the patch may be removed, removing the '+' from the kernelrelease. The calculation of the kernelrelease will also stay in its current location but will be ignored if it was already calculated previously. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-18 13:34:35 -04:00
ktest: Add helper function to avoid duplicate code Several places had the following code: get_grub_index; get_version; install; start_monitor; return monitor; Creating a function "start_monitor_and_boot()" replaces these mulitple uses with a single call. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:49:13 -04:00
ktest: Add another monitor flush before installing kernel On some tests that do multiple boots (patchcheck, bisect, etc), the build of the next kernel to run may finish before the stable kernel has finished booting. Then the install of the new kernel will fail when it tries to connect as the machine has not finished the boot process. Do one more monitor flush to make sure the machine is up and running before trying to connect to it again. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-22 08:58:19 -04:00
ktest: Add helper function to avoid duplicate code Several places had the following code: get_grub_index; get_version; install; start_monitor; return monitor; Creating a function "start_monitor_and_boot()" replaces these mulitple uses with a single call. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:49:13 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Implement our own force min config Using the build KCONFIG_ALLCONFIG environment variable to force the min config may not always work properly. Since ktest is written in perl, it is trivial to read and replace the current config with the configs specified by the min config. Now the min config (and add configs) are read by perl and before a make is done, these configs in the .config file are replaced by the version in the min config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:40:58 -04:00
ktest: Handle kernels before make oldnoconfig When bisecting, one may come across a kernel that does not have make oldnoconfig. In this case, we need to run the command "yes" into a make oldconfig. This will select defaults instead of 'n' into each command, but it works as a work around. Note, "yes n" will not work because a config may have a value that "n" is not acceptable for. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-07 13:27:43 -05:00
ktest: Implement our own force min config Using the build KCONFIG_ALLCONFIG environment variable to force the min config may not always work properly. Since ktest is written in perl, it is trivial to read and replace the current config with the configs specified by the min config. Now the min config (and add configs) are read by perl and before a make is done, these configs in the .config file are replaced by the version in the min config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:40:58 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Implement our own force min config Using the build KCONFIG_ALLCONFIG environment variable to force the min config may not always work properly. Since ktest is written in perl, it is trivial to read and replace the current config with the configs specified by the min config. Now the min config (and add configs) are read by perl and before a make is done, these configs in the .config file are replaced by the version in the min config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:40:58 -04:00
ktest: Handle kernels before make oldnoconfig When bisecting, one may come across a kernel that does not have make oldnoconfig. In this case, we need to run the command "yes" into a make oldconfig. This will select defaults instead of 'n' into each command, but it works as a work around. Note, "yes n" will not work because a config may have a value that "n" is not acceptable for. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-07 13:27:43 -05:00
ktest: Implement our own force min config Using the build KCONFIG_ALLCONFIG environment variable to force the min config may not always work properly. Since ktest is written in perl, it is trivial to read and replace the current config with the configs specified by the min config. Now the min config (and add configs) are read by perl and before a make is done, these configs in the .config file are replaced by the version in the min config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:40:58 -04:00
ktest: Handle kernels before make oldnoconfig When bisecting, one may come across a kernel that does not have make oldnoconfig. In this case, we need to run the command "yes" into a make oldconfig. This will select defaults instead of 'n' into each command, but it works as a work around. Note, "yes n" will not work because a config may have a value that "n" is not acceptable for. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-07 13:27:43 -05:00
ktest: Implement our own force min config Using the build KCONFIG_ALLCONFIG environment variable to force the min config may not always work properly. Since ktest is written in perl, it is trivial to read and replace the current config with the configs specified by the min config. Now the min config (and add configs) are read by perl and before a make is done, these configs in the .config file are replaced by the version in the min config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:40:58 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Do not reboot on config or build issues Even if REBOOT_ON_ERROR is set, it becomes annoying that the target machine is rebooted when a config option is incorrect or a build fails. There's no reason to reboot the target for host only issues. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:12:20 -04:00
ktest: Fix kernelrevision with POST_BUILD The PRE_BUILD and POST_BUILD options of ktest are added to allow the user to add temporary patch to the system and remove it on builds. This is sometimes use to take a change from another git branch and add it to a series without the fix so that this series can be tested, when an unrelated bug exists in the series. The problem comes when a tagged commit is being used. For example, if v3.2 is being tested, and we add a patch to it, the kernelrelease for that commit will be 3.2.0+, but without the patch the version will be 3.2.0. This can cause problems when the kernelrelease is determined for creating the /lib/modules directory. The kernel booting has the '+' but the module directory will not, and the modules will be missing for that boot, and may not allow the kernel to succeed. The fix is to put the creation of the kernelrelease in the POST_BUILD logic, before it applies the POST_BUILD operation. The POST_BUILD is where the patch may be removed, removing the '+' from the kernelrelease. The calculation of the kernelrelease will also stay in its current location but will be ignored if it was already calculated previously. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-18 13:34:35 -04:00
ktest: Add POST/PRE_BUILD options There are some cases that a patch may be needed to apply to the kernel in patchcheck or bisect tests. Adding a PRE_BUILD option to apply the patch and POST_BUILD to remove it, allows for this to be done easily. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:39:31 -04:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: Use $output_config instead of typing $outputdir/.config To help prevent typos, use $output_config as the reference to "$outputdir/.config". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 16:43:21 -05:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Use oldnoconfig instead of yes command Running the command "yes ''" through the make oldconfig may enable things we do not want enabled. If something is default enabled, the yes command with '' as an argument will enable it. Use oldnoconfig, which runs everything as if 'no' was used. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 16:35:48 -05:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: Use $output_config instead of typing $outputdir/.config To help prevent typos, use $output_config as the reference to "$outputdir/.config". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 16:43:21 -05:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: Only need to save .config when doing mrproper Only save the .config file if we're doing mrproper Signed-off-by: Andrew Jones <drjones@redhat.com> Link: http://lkml.kernel.org/r/1313155932-20092-3-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-12 15:32:04 +02:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Only need to save .config when doing mrproper Only save the .config file if we're doing mrproper Signed-off-by: Andrew Jones <drjones@redhat.com> Link: http://lkml.kernel.org/r/1313155932-20092-3-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-12 15:32:04 +02:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: Use $output_config instead of typing $outputdir/.config To help prevent typos, use $output_config as the reference to "$outputdir/.config". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 16:43:21 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Implement our own force min config Using the build KCONFIG_ALLCONFIG environment variable to force the min config may not always work properly. Since ktest is written in perl, it is trivial to read and replace the current config with the configs specified by the min config. Now the min config (and add configs) are read by perl and before a make is done, these configs in the .config file are replaced by the version in the min config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:40:58 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Implement our own force min config Using the build KCONFIG_ALLCONFIG environment variable to force the min config may not always work properly. Since ktest is written in perl, it is trivial to read and replace the current config with the configs specified by the min config. Now the min config (and add configs) are read by perl and before a make is done, these configs in the .config file are replaced by the version in the min config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:40:58 -04:00
ktest: Handle kernels before make oldnoconfig When bisecting, one may come across a kernel that does not have make oldnoconfig. In this case, we need to run the command "yes" into a make oldconfig. This will select defaults instead of 'n' into each command, but it works as a work around. Note, "yes n" will not work because a config may have a value that "n" is not acceptable for. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-07 13:27:43 -05:00
ktest: Implement our own force min config Using the build KCONFIG_ALLCONFIG environment variable to force the min config may not always work properly. Since ktest is written in perl, it is trivial to read and replace the current config with the configs specified by the min config. Now the min config (and add configs) are read by perl and before a make is done, these configs in the .config file are replaced by the version in the min config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:40:58 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add POST/PRE_BUILD options There are some cases that a patch may be needed to apply to the kernel in patchcheck or bisect tests. Adding a PRE_BUILD option to apply the patch and POST_BUILD to remove it, allows for this to be done easily. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:39:31 -04:00
ktest: Fix kernelrevision with POST_BUILD The PRE_BUILD and POST_BUILD options of ktest are added to allow the user to add temporary patch to the system and remove it on builds. This is sometimes use to take a change from another git branch and add it to a series without the fix so that this series can be tested, when an unrelated bug exists in the series. The problem comes when a tagged commit is being used. For example, if v3.2 is being tested, and we add a patch to it, the kernelrelease for that commit will be 3.2.0+, but without the patch the version will be 3.2.0. This can cause problems when the kernelrelease is determined for creating the /lib/modules directory. The kernel booting has the '+' but the module directory will not, and the modules will be missing for that boot, and may not allow the kernel to succeed. The fix is to put the creation of the kernelrelease in the POST_BUILD logic, before it applies the POST_BUILD operation. The POST_BUILD is where the patch may be removed, removing the '+' from the kernelrelease. The calculation of the kernelrelease will also stay in its current location but will be ignored if it was already calculated previously. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-18 13:34:35 -04:00
ktest: Add POST/PRE_BUILD options There are some cases that a patch may be needed to apply to the kernel in patchcheck or bisect tests. Adding a PRE_BUILD option to apply the patch and POST_BUILD to remove it, allows for this to be done easily. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:39:31 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Do not reboot on config or build issues Even if REBOOT_ON_ERROR is set, it becomes annoying that the target machine is rebooted when a config option is incorrect or a build fails. There's no reason to reboot the target for host only issues. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:12:20 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Do not reboot on config or build issues Even if REBOOT_ON_ERROR is set, it becomes annoying that the target machine is rebooted when a config option is incorrect or a build fails. There's no reason to reboot the target for host only issues. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:12:20 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Add TEST_NAME option Searching through several tests, it gets confusing which test result is for which test. By adding the TEST_NAME option, the user can tell which test result belongs to which test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:38:48 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Add TEST_NAME option Searching through several tests, it gets confusing which test result is for which test. By adding the TEST_NAME option, the user can tell which test result belongs to which test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:38:48 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Allow success logs to be stored Add a STORE_SUCCESSES option, to allow success logs to be stored, for example to double-check or otherwise post-process the test logs. Link: http://lkml.kernel.org/r/1321616131-21352-3-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18 17:05:31 +05:30
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST For machines that do no use grub, it may be needed to update an external image (tftp) before doing a reboot into either the test image or the known good image. The option SWITCH_TO_GOOD is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into a known good image. The option SWITCH_TO_TEST is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into the test image. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 16:29:10 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Add manual bisect For both git bisect and config bisect, if BISECT_MANUAL is set to 1, then bisect will stop between iterations and ask the user for the result. The actual result is ignored. This makes it possible to use ktest.pl for bisecting configs and git and let the user examine the results themselves and enter their own results. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:22:39 -05:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Save test output The test output may contain useful information; save it along with the already-saved buildlog, dmesg, and .config. Link: http://lkml.kernel.org/r/1321616131-21352-1-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18 17:05:29 +05:30
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Save test output The test output may contain useful information; save it along with the already-saved buildlog, dmesg, and .config. Link: http://lkml.kernel.org/r/1321616131-21352-1-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18 17:05:29 +05:30
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Monitor kernel while running of user tests Record the console of tests to both the console and the log. Also, record the bug reports afte the test has completed. Currently, if a kernel bug happens while running the userland test, the test stops and will not record the kernel bug. This makes it difficult to solve what happened. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:44:35 -05:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Monitor kernel while running of user tests Record the console of tests to both the console and the log. Also, record the bug reports afte the test has completed. Currently, if a kernel bug happens while running the userland test, the test stops and will not record the kernel bug. This makes it difficult to solve what happened. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:44:35 -05:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Allow overriding bisect test results When running the ktest git bisect test, if the BISECT_TYPE is "test", the bisect is determined to be good or bad based off of the error code of the test that is run. Currently, if the test returns 0, it is considered a pass (good), a non-zero is considered a fail (bad). But it has been requested to add more options, and also change the meanings of the error codes of the test. For example, one may want the test to detect if the commit is not good or bad, (maybe the bisect came to a point where the code in question does not exist). The test could report an error code that should tell ktest to skip the commit. Also, a test could detect that something is horribly wrong and the biscet should just be aborted. The new options: BISECT_RET_GOOD BISECT_RET_BAD BISECT_RET_SKIP BISECT_RET_ABORT BISECT_RET_DEFAULT have been added. The first 4 take an integer value that will represent if the test should be considered a pass, fail, neither good nor bad, or abort respectively. The BISECT_RET_DEFAULT will bo whatever is not defined by the above codes. If only BISECT_RET_DEFAULT is defined, then all tests will do the default. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 12:43:57 -05:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add BISECT_SKIP If a during a git bisect, ktest fails on something other than what it is testing (if BISECT_TYPE is test but it fails on build), if BISECT_SKIP is set, then it will do a "git bisect skip" instead of just failing the bisect and letting the user find a good commit to test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:26:31 -05:00
ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST For machines that do no use grub, it may be needed to update an external image (tftp) before doing a reboot into either the test image or the known good image. The option SWITCH_TO_GOOD is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into a known good image. The option SWITCH_TO_TEST is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into the test image. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 16:29:10 -05:00
ktest: Add BISECT_SKIP If a during a git bisect, ktest fails on something other than what it is testing (if BISECT_TYPE is test but it fails on build), if BISECT_SKIP is set, then it will do a "git bisect skip" instead of just failing the bisect and letting the user find a good commit to test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:26:31 -05:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Add BISECT_SKIP If a during a git bisect, ktest fails on something other than what it is testing (if BISECT_TYPE is test but it fails on build), if BISECT_SKIP is set, then it will do a "git bisect skip" instead of just failing the bisect and letting the user find a good commit to test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:26:31 -05:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Add helper function to avoid duplicate code Several places had the following code: get_grub_index; get_version; install; start_monitor; return monitor; Creating a function "start_monitor_and_boot()" replaces these mulitple uses with a single call. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:49:13 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Add BISECT_SKIP If a during a git bisect, ktest fails on something other than what it is testing (if BISECT_TYPE is test but it fails on build), if BISECT_SKIP is set, then it will do a "git bisect skip" instead of just failing the bisect and letting the user find a good commit to test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:26:31 -05:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Reboot to good kernel after every bisect run Reboot after each bisect run regardless if the bisect passed or failed. The test may just be to boot the kernel and that kernel may not have a way to copy the next kerne to it. Reboot to a known good kernel after each bisect run. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 09:16:29 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Add manual bisect For both git bisect and config bisect, if BISECT_MANUAL is set to 1, then bisect will stop between iterations and ask the user for the result. The actual result is ignored. This makes it possible to use ktest.pl for bisecting configs and git and let the user examine the results themselves and enter their own results. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:22:39 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIP When BISECT_REVERSE and BISECT_SKIP are used together with boot or test testing, build failures are treated as boot or test failures and 'git bisect bad' is executed instead of 'git bisect skip'. This is because the $ret value of -1 is treated as a build failure, but the $reverse_bisect logic does not properly handle this. Simple fix, only invert it if it is positive. Link: http://lkml.kernel.org/r/1335235380-8509-1-git-send-email-Russ.Dill@ti.com Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-04-23 19:43:00 -07:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
ktest: Add BISECT_SKIP If a during a git bisect, ktest fails on something other than what it is testing (if BISECT_TYPE is test but it fails on build), if BISECT_SKIP is set, then it will do a "git bisect skip" instead of just failing the bisect and letting the user find a good commit to test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:26:31 -05:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Add BISECT_SKIP If a during a git bisect, ktest fails on something other than what it is testing (if BISECT_TYPE is test but it fails on build), if BISECT_SKIP is set, then it will do a "git bisect skip" instead of just failing the bisect and letting the user find a good commit to test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:26:31 -05:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Add BISECT_SKIP If a during a git bisect, ktest fails on something other than what it is testing (if BISECT_TYPE is test but it fails on build), if BISECT_SKIP is set, then it will do a "git bisect skip" instead of just failing the bisect and letting the user find a good commit to test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:26:31 -05:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Allow bisect test to restart where it left off If a bisect is killed for some reason, have ktest detect that a bisect is in progress and if so, allow the user to start the bisect where it left off. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-22 20:48:57 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Add BISECT_FILES to run git bisect on paths Add the config option BISECT_FILES that allows the user to specify what path in the kernel to run the git bisect on. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:38:12 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Add reverse bisect, better logging, copyright Added the ability to do a reverse bisect. Better logging of running commands. Added the copyright statement. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:05 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Allow bisect test to restart where it left off If a bisect is killed for some reason, have ktest detect that a bisect is in progress and if so, allow the user to start the bisect where it left off. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-22 20:48:57 -05:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Allow bisect test to restart where it left off If a bisect is killed for some reason, have ktest detect that a bisect is in progress and if so, allow the user to start the bisect where it left off. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-22 20:48:57 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add BISECT_FILES to run git bisect on paths Add the config option BISECT_FILES that allows the user to specify what path in the kernel to run the git bisect on. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:38:12 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Ignore unset values of the minconfig in config_bisect By ignoring the unset values of the minconfig in deciding what to test in the config_bisect can cause the problem config from being tested too. Just do not test the configs that are set in the minconfig. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-01 23:27:19 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Implement our own force min config Using the build KCONFIG_ALLCONFIG environment variable to force the min config may not always work properly. Since ktest is written in perl, it is trivial to read and replace the current config with the configs specified by the min config. Now the min config (and add configs) are read by perl and before a make is done, these configs in the .config file are replaced by the version in the min config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:40:58 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Copy the last good and bad configs in config_bisect During the config_bisect, in case of failure, it is nice to have the last good and bad .configs that were used. This would let us restart the config_bisect from those configs. Copy the last good config into the output dir as config_good, and the last bad config as config_bad. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-11 11:34:38 -05:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Fix off-by-one in config bisect result Because in perl the array size returned by $#arr, is the last index and not the actually size of the array, we end the config bisect early, thinking there is only one config left when there are in fact two. Thus the result has a 50% chance of picking the correct config that caused the problem. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-01 23:22:30 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Add manual bisect For both git bisect and config bisect, if BISECT_MANUAL is set to 1, then bisect will stop between iterations and ask the user for the result. The actual result is ignored. This makes it possible to use ktest.pl for bisecting configs and git and let the user examine the results themselves and enter their own results. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:22:39 -05:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Copy the last good and bad configs in config_bisect During the config_bisect, in case of failure, it is nice to have the last good and bad .configs that were used. This would let us restart the config_bisect from those configs. Copy the last good config into the output dir as config_good, and the last bad config as config_bad. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-11 11:34:38 -05:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Fix off-by-one in config bisect result Because in perl the array size returned by $#arr, is the last index and not the actually size of the array, we end the config bisect early, thinking there is only one config left when there are in fact two. Thus the result has a 50% chance of picking the correct config that caused the problem. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-01 23:22:30 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Add manual bisect For both git bisect and config bisect, if BISECT_MANUAL is set to 1, then bisect will stop between iterations and ask the user for the result. The actual result is ignored. This makes it possible to use ktest.pl for bisecting configs and git and let the user examine the results themselves and enter their own results. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:22:39 -05:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Add CONFIG_BISECT_GOOD option Currently the config_bisect compares the min config with the CONFIG_BISECT config. There may be another config that we know is good that we want to ignore configs on. By passing in this config it will ignore the options that are set in the good config. Note: This only ignores the config, it does not (yet) handle options that are different between the two configs. If the good config has "SLAB" set and the bad config has "SLUB" it will not find the bug if the bug had to do with changing these two options. This is something that I intend to implement in the future. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:35:35 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Implement our own force min config Using the build KCONFIG_ALLCONFIG environment variable to force the min config may not always work properly. Since ktest is written in perl, it is trivial to read and replace the current config with the configs specified by the min config. Now the min config (and add configs) are read by perl and before a make is done, these configs in the .config file are replaced by the version in the min config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:40:58 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
tools: Fix typo in ktest.pl Correct spelling "faied" to "failed" in tools/testing/ktest/ktest.pl Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-11 21:46:56 +09:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Fix bug when ADD_CONFIG is set but MIN_CONFIG is not The MIN_CONFIG is a single config that is considered to have all the configs that are required to boot the box. ADD_CONFIG is a list of configs that we add that may contain configs known to be broken (set off) or just configs that we want every box to have and this can include shared configs. If a config has no MIN_CONFIG defined, but has multiple files defined for the ADD_CONFIG, the test will die, because the MIN_CONFIG will default to ADD_CONFIG. The problem is the code to open MIN_CONFIG expects a string of one file, not multiple, and the open will fail. Since the real minconfig that is used is a concatination of MIN_CONFIG and ADD_CONFIG files, we change the code to open that instead of whatever MIN_CONFIG defaults to. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 22:05:59 -04:00
ktest: Implement our own force min config Using the build KCONFIG_ALLCONFIG environment variable to force the min config may not always work properly. Since ktest is written in perl, it is trivial to read and replace the current config with the configs specified by the min config. Now the min config (and add configs) are read by perl and before a make is done, these configs in the .config file are replaced by the version in the min config. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 10:40:58 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Reboot after each patchcheck run The patches being checked may not leave the kernel in a state that the next run will allow the new kernel to be copied to the machine. Reboot to a known good kernel before continuing to the next kernel to test. Added option PATCHCHECK_SLEEP_TIME for the max time to sleep between patchcheck reboots. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 09:18:18 -04:00
ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST For machines that do no use grub, it may be needed to update an external image (tftp) before doing a reboot into either the test image or the known good image. The option SWITCH_TO_GOOD is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into a known good image. The option SWITCH_TO_TEST is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into the test image. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 16:29:10 -05:00
ktest: Reboot after each patchcheck run The patches being checked may not leave the kernel in a state that the next run will allow the new kernel to be copied to the machine. Reboot to a known good kernel before continuing to the next kernel to test. Added option PATCHCHECK_SLEEP_TIME for the max time to sleep between patchcheck reboots. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 09:18:18 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Add IGNORE_WARNINGS to ignore warnings in some patches Doing a patchcheck test, there may be warnings that gcc produces which may be OK, and the test should not fail on that commit. By adding a IGNORE_WARNINGS option to list a space delimited SHA1s that are ignored lets the user avoid having the test fail on certain commits. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:46:25 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Add IGNORE_WARNINGS to ignore warnings in some patches Doing a patchcheck test, there may be warnings that gcc produces which may be OK, and the test should not fail on that commit. By adding a IGNORE_WARNINGS option to list a space delimited SHA1s that are ignored lets the user avoid having the test fail on certain commits. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:46:25 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Add helper function to avoid duplicate code Several places had the following code: get_grub_index; get_version; install; start_monitor; return monitor; Creating a function "start_monitor_and_boot()" replaces these mulitple uses with a single call. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:49:13 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Reboot after each patchcheck run The patches being checked may not leave the kernel in a state that the next run will allow the new kernel to be copied to the machine. Reboot to a known good kernel before continuing to the next kernel to test. Added option PATCHCHECK_SLEEP_TIME for the max time to sleep between patchcheck reboots. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 09:18:18 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Sort make_min_config configs by dependecies The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-04 09:40:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Sort make_min_config configs by dependecies The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-04 09:40:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Sort make_min_config configs by dependecies The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-04 09:40:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Sort make_min_config configs by dependecies The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-04 09:40:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Sort make_min_config configs by dependecies The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-04 09:40:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Sort make_min_config configs by dependecies The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-04 09:40:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Sort make_min_config configs by dependecies The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-04 09:40:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Keep fonud configs separate from default configs The IGNORE_CONFIG file holds the configs that we don't want to change (with their proper settings). But on start up, the make noconfig is executed, and the configs that are on are also put into the ignore config category. But these are configs that were forced on by the kconfig scripts and not something that we found must be enabled to boot our machine. By keeping the configs that are forced on by default, separate from the configs we found that are required to boot the box, we can get a much more interesting IGNORE_CONFIG. In fact, the IGNORE_CONFIG can usually end up being the must have configs to boot, and only have 6 or 7 configs set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 22:01:56 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Sort make_min_config configs by dependecies The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-04 09:40:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Add MIN_CONFIG_TYPE to allow making a minum .config that has network Add a MIN_CONFIG_TYPE that can be set to 'test' or 'boot'. The default is 'boot' which is what make_min_config has done previously: makes a config file that is the minimum needed to boot the target. But when MIN_CONFIG_TYPE is set to 'test', not only must the target boot, but it must also successfully run the TEST. This allows the creation of a config file that is the minimum to boot and also perform ssh to the target, or anything else a developer wants. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-21 17:13:40 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Add USE_OUTPUT_MIN_CONFIG to avoid prompt on make_min_config If the file that OUTPUT_MIN_CONFIG exists then ktest.pl will prompt the user and ask them if the OUTPUT_MIN_CONFIG should be used as the starting point for make_min_config instead of MIN_CONFIG. This is usually the case, and to allow the user to do so, which is helpful if the user is creating different min configs based on tests, and they know one is a superset of another test, they can set USE_OUTPUT_MIN_CONFIG to one, which will prevent kest.pl from prompting to use the OUTPUT_MIN_CONFIG and it will just use it. If USE_OUTPUT_MIN_CONIFG is set to zero, then ktest.pl will continue to use MIN_CONFIG instead. The default is that USE_OUTPUT_MIN_CONFIG is undefined. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-21 23:35:12 -04:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Add USE_OUTPUT_MIN_CONFIG to avoid prompt on make_min_config If the file that OUTPUT_MIN_CONFIG exists then ktest.pl will prompt the user and ask them if the OUTPUT_MIN_CONFIG should be used as the starting point for make_min_config instead of MIN_CONFIG. This is usually the case, and to allow the user to do so, which is helpful if the user is creating different min configs based on tests, and they know one is a superset of another test, they can set USE_OUTPUT_MIN_CONFIG to one, which will prevent kest.pl from prompting to use the OUTPUT_MIN_CONFIG and it will just use it. If USE_OUTPUT_MIN_CONIFG is set to zero, then ktest.pl will continue to use MIN_CONFIG instead. The default is that USE_OUTPUT_MIN_CONFIG is undefined. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-21 23:35:12 -04:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Keep fonud configs separate from default configs The IGNORE_CONFIG file holds the configs that we don't want to change (with their proper settings). But on start up, the make noconfig is executed, and the configs that are on are also put into the ignore config category. But these are configs that were forced on by the kconfig scripts and not something that we found must be enabled to boot our machine. By keeping the configs that are forced on by default, separate from the configs we found that are required to boot the box, we can get a much more interesting IGNORE_CONFIG. In fact, the IGNORE_CONFIG can usually end up being the must have configs to boot, and only have 6 or 7 configs set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 22:01:56 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Keep fonud configs separate from default configs The IGNORE_CONFIG file holds the configs that we don't want to change (with their proper settings). But on start up, the make noconfig is executed, and the configs that are on are also put into the ignore config category. But these are configs that were forced on by the kconfig scripts and not something that we found must be enabled to boot our machine. By keeping the configs that are forced on by default, separate from the configs we found that are required to boot the box, we can get a much more interesting IGNORE_CONFIG. In fact, the IGNORE_CONFIG can usually end up being the must have configs to boot, and only have 6 or 7 configs set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 22:01:56 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Keep fonud configs separate from default configs The IGNORE_CONFIG file holds the configs that we don't want to change (with their proper settings). But on start up, the make noconfig is executed, and the configs that are on are also put into the ignore config category. But these are configs that were forced on by the kconfig scripts and not something that we found must be enabled to boot our machine. By keeping the configs that are forced on by default, separate from the configs we found that are required to boot the box, we can get a much more interesting IGNORE_CONFIG. In fact, the IGNORE_CONFIG can usually end up being the must have configs to boot, and only have 6 or 7 configs set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 22:01:56 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Sort make_min_config configs by dependecies The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-04 09:40:17 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Sort make_min_config configs by dependecies The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-04 09:40:17 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Fix make_min_config test when build fails The make_min_config does not take into account when the build fails, resulting in a invalid MIN_CONFIG .config file. When the build fails, it is ignored and the boot test is executed, using the previous built kernel. The configs that should be tested are not tested and they may be added or removed depending on the result of the last kernel that succeeded to be built. If the build fails, mark the current config as a failure and the configs that were disabled may still be needed. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-27 13:58:49 -05:00
ktest: Add MIN_CONFIG_TYPE to allow making a minum .config that has network Add a MIN_CONFIG_TYPE that can be set to 'test' or 'boot'. The default is 'boot' which is what make_min_config has done previously: makes a config file that is the minimum needed to boot the target. But when MIN_CONFIG_TYPE is set to 'test', not only must the target boot, but it must also successfully run the TEST. This allows the creation of a config file that is the minimum to boot and also perform ssh to the target, or anything else a developer wants. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-21 17:13:40 -04:00
ktest: Fix make_min_config test when build fails The make_min_config does not take into account when the build fails, resulting in a invalid MIN_CONFIG .config file. When the build fails, it is ignored and the boot test is executed, using the previous built kernel. The configs that should be tested are not tested and they may be added or removed depending on the result of the last kernel that succeeded to be built. If the build fails, mark the current config as a failure and the configs that were disabled may still be needed. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-27 13:58:49 -05:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Use Kconfig dependencies to shorten time to make min_config To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:25:24 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Keep fonud configs separate from default configs The IGNORE_CONFIG file holds the configs that we don't want to change (with their proper settings). But on start up, the make noconfig is executed, and the configs that are on are also put into the ignore config category. But these are configs that were forced on by the kconfig scripts and not something that we found must be enabled to boot our machine. By keeping the configs that are forced on by default, separate from the configs we found that are required to boot the box, we can get a much more interesting IGNORE_CONFIG. In fact, the IGNORE_CONFIG can usually end up being the must have configs to boot, and only have 6 or 7 configs set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 22:01:56 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Keep fonud configs separate from default configs The IGNORE_CONFIG file holds the configs that we don't want to change (with their proper settings). But on start up, the make noconfig is executed, and the configs that are on are also put into the ignore config category. But these are configs that were forced on by the kconfig scripts and not something that we found must be enabled to boot our machine. By keeping the configs that are forced on by default, separate from the configs we found that are required to boot the box, we can get a much more interesting IGNORE_CONFIG. In fact, the IGNORE_CONFIG can usually end up being the must have configs to boot, and only have 6 or 7 configs set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 22:01:56 -04:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST For machines that do no use grub, it may be needed to update an external image (tftp) before doing a reboot into either the test image or the known good image. The option SWITCH_TO_GOOD is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into a known good image. The option SWITCH_TO_TEST is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into the test image. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 16:29:10 -05:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: When creating a new config, ask for BUILD_OPTIONS When creating a new config, ask for the BUILD_OPTIONS variable that lets users add things like -j20 to the make. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 16:00:48 -05:00
ktest: Ask for type of test when creating a new config When no argument is supplied to ktest, or the config applied does not exist and a new config is being created, instead of just using the default test type, give the user an option to pick the test type of either 'build, install, or boot'. Other options may be added later but then those would require more questions as they require more fields. But that's for another release of ktest to add that feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 13:41:18 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: When creating new config, allow the use of ${THIS_DIR} Typing in a full path when you know that the path exists within the directory your are running is tedious and unnecessary. Allow the user to use ${PWD} if they want a dynamic path name which will be the path that ktest.pl is executed from or use ${THIS_DIR} which is a variable assigned `pwd` and the the variable will exist within the config, allowing the user to change it and affect all other paths using this variable as well Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-21 20:39:33 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Ask for type of test when creating a new config When no argument is supplied to ktest, or the config applied does not exist and a new config is being created, instead of just using the default test type, give the user an option to pick the test type of either 'build, install, or boot'. Other options may be added later but then those would require more questions as they require more fields. But that's for another release of ktest to add that feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 13:41:18 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: Have LOG_FILE evaluate options as well The LOG_FILE variable needs to evaluate the $ options as well. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 11:03:34 -04:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
ktest: When creating new config, allow the use of ${THIS_DIR} Typing in a full path when you know that the path exists within the directory your are running is tedious and unnecessary. Allow the user to use ${PWD} if they want a dynamic path name which will be the path that ktest.pl is executed from or use ${THIS_DIR} which is a variable assigned `pwd` and the the variable will exist within the config, allowing the user to change it and affect all other paths using this variable as well Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-21 20:39:33 -05:00
ktest: Ask for the manditory config options instead of just failing In keeping with the notion that all tools should be simple for all to use. I've changed ktest.pl to ask for mandatory options instead of just failing. It will append (or create) the options the user types in, onto the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18 15:39:48 -05:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Allow options to be used by other options There are cases where one ktest option may be used within another ktest option. Allow them to be reused just like config variables but there are evaluated at time of test not config processing time. Thus having something like: MAKE_CMD = make ARCH=${ARCH} TEST_START ARCH = powerpc TEST_START ARCH = arm Will have the arch defined for each test iteration. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 15:48:59 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: New TEST_START instead of using [], and use real SHA1s Change the config to use TEST_START where the options after a TEST_START automatically get the [] as it is read and they do not need to exist in the config file; TEST_START MIN_CONFIG = myconfig is the same as MIN_CONFIG[1] = myconfig The benefit is that you no longer need to keep track of test numbers with tests. Also process the commit ids that are passed to the options to get the actually SHA1 so it is no longer relative to the branch. Ie, saying HEAD will get the current SHA1 and then that will be used, and will work even if another branch is checked out. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:13:54 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Allow options to be used by other options There are cases where one ktest option may be used within another ktest option. Allow them to be reused just like config variables but there are evaluated at time of test not config processing time. Thus having something like: MAKE_CMD = make ARCH=${ARCH} TEST_START ARCH = powerpc TEST_START ARCH = arm Will have the arch defined for each test iteration. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 15:48:59 -04:00
ktest: Have LOG_FILE evaluate options as well The LOG_FILE variable needs to evaluate the $ options as well. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-13 11:03:34 -04:00
ktest: Allow options to be used by other options There are cases where one ktest option may be used within another ktest option. Allow them to be reused just like config variables but there are evaluated at time of test not config processing time. Thus having something like: MAKE_CMD = make ARCH=${ARCH} TEST_START ARCH = powerpc TEST_START ARCH = arm Will have the arch defined for each test iteration. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-20 15:48:59 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Added reboot on success Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:51 -04:00
ktest: Do not reboot on config or build issues Even if REBOOT_ON_ERROR is set, it becomes annoying that the target machine is rebooted when a config option is incorrect or a build fails. There's no reason to reboot the target for host only issues. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:12:20 -04:00
ktest: Fix reboot on success stopping all reboots The change to let individual tests decide to reboot the machine on success of the entire test also prevented errors from rebooting when an error was detected. The "no_reboot" variable was only cleared if the test had reboot_on_success set. But the no_reboot variable also prevents the test rebooting when an error was detected even when REBOOT_ON_ERROR was set. Add a new "reboot_success" variable that is used to determine if the test should reboot on success and not touch the no_reboot variable. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-01 08:20:12 -04:00
ktest: Do not reboot on config or build issues Even if REBOOT_ON_ERROR is set, it becomes annoying that the target machine is rebooted when a config option is incorrect or a build fails. There's no reason to reboot the target for host only issues. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:12:20 -04:00
ktest: Fix kernelrevision with POST_BUILD The PRE_BUILD and POST_BUILD options of ktest are added to allow the user to add temporary patch to the system and remove it on builds. This is sometimes use to take a change from another git branch and add it to a series without the fix so that this series can be tested, when an unrelated bug exists in the series. The problem comes when a tagged commit is being used. For example, if v3.2 is being tested, and we add a patch to it, the kernelrelease for that commit will be 3.2.0+, but without the patch the version will be 3.2.0. This can cause problems when the kernelrelease is determined for creating the /lib/modules directory. The kernel booting has the '+' but the module directory will not, and the modules will be missing for that boot, and may not allow the kernel to succeed. The fix is to put the creation of the kernelrelease in the POST_BUILD logic, before it applies the POST_BUILD operation. The POST_BUILD is where the patch may be removed, removing the '+' from the kernelrelease. The calculation of the kernelrelease will also stay in its current location but will be ignored if it was already calculated previously. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-18 13:34:35 -04:00
ktest: Add poweroff after halt and powercycle after reboot Added the options POWEROFF_AFTER_HALT to handle boxes that do not really shut off after a halt is called. Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that don't reboot but get stuck during the reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:38 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Detect typos in option names It becomes quite annoying when you go to run a test and then realize that you typed an option name wrong, and the test starts doing the default action and not what you expected it to do. It is even more annoying when you wake up the next day after running the test over night when you discover this. By testing if all options specified in a config file are used by either ktest or were used in one of the option's values we can see if there are any dangling options that were not used. In such a case, show the user the options that were not used and ask them if they want to continue or not. The option IGNORE_UNUSED was also added to allow the user to override this feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:37:22 -05:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Add prompt to use OUTPUT_MIN_CONFIG If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:57:25 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Create outputdir if it does not exist Signed-off-by: Andrew Jones <drjones@redhat.com> Link: http://lkml.kernel.org/r/1313155932-20092-2-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-12 15:32:03 +02:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Save test output The test output may contain useful information; save it along with the already-saved buildlog, dmesg, and .config. Link: http://lkml.kernel.org/r/1321616131-21352-1-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18 17:05:29 +05:30
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Use $output_config instead of typing $outputdir/.config To help prevent typos, use $output_config as the reference to "$outputdir/.config". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 16:43:21 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Do not ask for some options if the only test is build When creating a ktest config or if te config only has build only tests, some of the manditory config options are not needed. Do not ask for them if all tests in the config file are just build tests. Suggested-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23 15:58:00 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Have all values be set by defaults Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:33:55 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add NO_INSTALL option to not install for a test There's cases where running the same kernel over and over again is useful, and being able to not install the same kernel can save time between tests. Add a NO_INSTALL option that tells ktest.pl to not install the new kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 17:50:48 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add NO_INSTALL option to not install for a test There's cases where running the same kernel over and over again is useful, and being able to not install the same kernel can save time between tests. Add a NO_INSTALL option that tells ktest.pl to not install the new kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 17:50:48 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
ktest: Save test output The test output may contain useful information; save it along with the already-saved buildlog, dmesg, and .config. Link: http://lkml.kernel.org/r/1321616131-21352-1-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18 17:05:29 +05:30
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Fix bug when ADD_CONFIG is set but MIN_CONFIG is not The MIN_CONFIG is a single config that is considered to have all the configs that are required to boot the box. ADD_CONFIG is a list of configs that we add that may contain configs known to be broken (set off) or just configs that we want every box to have and this can include shared configs. If a config has no MIN_CONFIG defined, but has multiple files defined for the ADD_CONFIG, the test will die, because the MIN_CONFIG will default to ADD_CONFIG. The problem is the code to open MIN_CONFIG expects a string of one file, not multiple, and the open will fail. Since the real minconfig that is used is a concatination of MIN_CONFIG and ADD_CONFIG files, we change the code to open that instead of whatever MIN_CONFIG defaults to. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 22:05:59 -04:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Use different temp config name for minconfig By using the "use_config" for minconfig and addconfig we risk trying to copy itself to itself, which will cause an unexpected failure. Use a different name instead. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-09 12:20:21 -05:00
ktest: Added continuing on success, clear log and timeout Add option to continue after a test fails. Add option to reset the log at start of running ktest. Update default timeout to 2 minutes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:15 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Fix reboot on success stopping all reboots The change to let individual tests decide to reboot the machine on success of the entire test also prevented errors from rebooting when an error was detected. The "no_reboot" variable was only cleared if the test had reboot_on_success set. But the no_reboot variable also prevents the test rebooting when an error was detected even when REBOOT_ON_ERROR was set. Add a new "reboot_success" variable that is used to determine if the test should reboot on success and not touch the no_reboot variable. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-01 08:20:12 -04:00
ktest: Allow a test to override REBOOT_ON_SUCCESS The option REBOOT_ON_SUCCESS is global, and will have the machine reboot the the box if all tests are successful. But a test may not want the machine to reboot, and perhaps have the kernel it loaded be used to install the next kernel. Or the last test may set up a kernel that the user may want to look at. In this case, the user could have the global option REBOOT_ON_SUCCESS be true, but if a test is defined to run at the end, that test can override the global option and keep the kernel it installed for the user to log in with. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 11:18:27 -04:00
ktest: Fix reboot on success stopping all reboots The change to let individual tests decide to reboot the machine on success of the entire test also prevented errors from rebooting when an error was detected. The "no_reboot" variable was only cleared if the test had reboot_on_success set. But the no_reboot variable also prevents the test rebooting when an error was detected even when REBOOT_ON_ERROR was set. Add a new "reboot_success" variable that is used to determine if the test should reboot on success and not touch the no_reboot variable. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-01 08:20:12 -04:00
ktest: Allow a test to override REBOOT_ON_SUCCESS The option REBOOT_ON_SUCCESS is global, and will have the machine reboot the the box if all tests are successful. But a test may not want the machine to reboot, and perhaps have the kernel it loaded be used to install the next kernel. Or the last test may set up a kernel that the user may want to look at. In this case, the user could have the global option REBOOT_ON_SUCCESS be true, but if a test is defined to run at the end, that test can override the global option and keep the kernel it installed for the user to log in with. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 11:18:27 -04:00
ktest: Do not reboot on config or build issues Even if REBOOT_ON_ERROR is set, it becomes annoying that the target machine is rebooted when a config option is incorrect or a build fails. There's no reason to reboot the target for host only issues. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-30 18:12:20 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Added config_bisect test type Added the ability to do a config_bisect. It starts with a bad config and does the following loop. Enable half the configs. if none of the configs to check are not enabled (caused by missing dependencies) enable the other half. Run the test if the test passes, remove the configs from the check but enabled them for further tests (to satisfy dependencies). else Remove any config that was not enabled, as we have found a new config that can cause a failure. loop till we have only one config left. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-08 11:14:10 -05:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Added patchcheck Added patchcheck functionality. It will checkout a given SHA1 and test that commit and all commits to another given SHA1. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:58 -04:00
ktest: Add test type make_min_config After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15 21:16:17 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
ktest: Add open and close console and start stop monitor It is much better to keep the monitor running throughout a test than to constantly start and stop it. Some console readers will show everything that has happened before when opening the console, and by opening it several times, causes the old content to be read multiple times in a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:22 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: Add TEST_TYPE install option In testing one of my boxes, I found that I only wanted to build and install the kernel. I wanted to manually reboot the box and test it. Adding a TEST_TYPE option "install" allows this to happen. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-18 16:35:44 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Add helper function to avoid duplicate code Several places had the following code: get_grub_index; get_version; install; start_monitor; return monitor; Creating a function "start_monitor_and_boot()" replaces these mulitple uses with a single call. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 20:49:13 -04:00
ktest: Added sample.conf, new %default option format Added sample.conf as a nice document to show new users. Use a %default hash to separate out the options that are default and allow us to complain about options being set twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:58:27 -04:00
ktest: Added better console, add test build Better reading of the console. Added running a script to do testing after build succeeds. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:43 -04:00
ktest: Bisecting, install modules, add logging Added bisecting, modules, logging of the output. Banners that show success. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:33 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: Fix reboot on success stopping all reboots The change to let individual tests decide to reboot the machine on success of the entire test also prevented errors from rebooting when an error was detected. The "no_reboot" variable was only cleared if the test had reboot_on_success set. But the no_reboot variable also prevents the test rebooting when an error was detected even when REBOOT_ON_ERROR was set. Add a new "reboot_success" variable that is used to determine if the test should reboot on success and not touch the no_reboot variable. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-01 08:20:12 -04:00
ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST For machines that do no use grub, it may be needed to update an external image (tftp) before doing a reboot into either the test image or the known good image. The option SWITCH_TO_GOOD is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into a known good image. The option SWITCH_TO_TEST is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into the test image. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 16:29:10 -05:00
ktest: Allow a test to override REBOOT_ON_SUCCESS The option REBOOT_ON_SUCCESS is global, and will have the machine reboot the the box if all tests are successful. But a test may not want the machine to reboot, and perhaps have the kernel it loaded be used to install the next kernel. Or the last test may set up a kernel that the user may want to look at. In this case, the user could have the global option REBOOT_ON_SUCCESS be true, but if a test is defined to run at the end, that test can override the global option and keep the kernel it installed for the user to log in with. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 11:18:27 -04:00
ktest: New features: noclean, dodie, poweroff on error and success Added dodie function to have a bit more control over die calls. BUILD_NOCLEAN to not run make mrproper or remove .config. POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests. Skip backtrace calls that were done by the backtrace tests. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:01 -04:00
ktest: New features reboot on error, make options REBOOT_ON_ERROR to reboot the box on error BUILD_OPTIONS to add options to the make build (like -j40) Added "useconfig:<config>". Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:57:21 -04:00
ktest: Allow a test to override REBOOT_ON_SUCCESS The option REBOOT_ON_SUCCESS is global, and will have the machine reboot the the box if all tests are successful. But a test may not want the machine to reboot, and perhaps have the kernel it loaded be used to install the next kernel. Or the last test may set up a kernel that the user may want to look at. In this case, the user could have the global option REBOOT_ON_SUCCESS be true, but if a test is defined to run at the end, that test can override the global option and keep the kernel it installed for the user to log in with. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 11:18:27 -04:00
ktest/cleanups: Added version 0.2, ssh as options Updated to version 0.2. Now have SSH_EXEC options. Also added some cleanups for keeping track of success and reading the config file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 14:35:37 -04:00
Initial start of ktest.pl Originally named autotest.pl, but renamed to ktest.pl now because the autotest name is used by other projects. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-02 15:01:32 -04:00