linux/drivers/base/power/runtime.c

1475 lines
40 KiB

PM / Runtime: Use device PM QoS constraints (v2) Make the runtime PM core use device PM QoS constraints to check if it is allowed to suspend a given device, so that an error code is returned if the device's own PM QoS constraint is negative or one of its children has already been suspended for too long. If this is not the case, the maximum estimated time the device is allowed to be suspended, computed as the minimum of the device's PM QoS constraint and the PM QoS constraints of its children (reduced by the difference between the current time and their suspend times) is stored in a new device's PM field power.max_time_suspended_ns that can be used by the device's subsystem or PM domain to decide whether or not to put the device into lower-power (and presumably higher-latency) states later (if the constraint is 0, which means "no constraint", the power.max_time_suspended_ns is set to -1). Additionally, the time of execution of the subsystem-level .runtime_suspend() callback for the device is recorded in the new power.suspend_time field for later use by the device's subsystem or PM domain along with power.max_time_suspended_ns (it also is used by the core code when the device's parent is suspended). Introduce a new helper function, pm_runtime_update_max_time_suspended(), allowing subsystems and PM domains (or device drivers) to update the power.max_time_suspended_ns field, for example after changing the power state of a suspended device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-01 00:01:31 +01:00
PM / Runtime: Use device PM QoS constraints (v2) Make the runtime PM core use device PM QoS constraints to check if it is allowed to suspend a given device, so that an error code is returned if the device's own PM QoS constraint is negative or one of its children has already been suspended for too long. If this is not the case, the maximum estimated time the device is allowed to be suspended, computed as the minimum of the device's PM QoS constraint and the PM QoS constraints of its children (reduced by the difference between the current time and their suspend times) is stored in a new device's PM field power.max_time_suspended_ns that can be used by the device's subsystem or PM domain to decide whether or not to put the device into lower-power (and presumably higher-latency) states later (if the constraint is 0, which means "no constraint", the power.max_time_suspended_ns is set to -1). Additionally, the time of execution of the subsystem-level .runtime_suspend() callback for the device is recorded in the new power.suspend_time field for later use by the device's subsystem or PM domain along with power.max_time_suspended_ns (it also is used by the core code when the device's parent is suspended). Introduce a new helper function, pm_runtime_update_max_time_suspended(), allowing subsystems and PM domains (or device drivers) to update the power.max_time_suspended_ns field, for example after changing the power state of a suspended device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-01 00:01:31 +01:00
PM / Runtime: Use device PM QoS constraints (v2) Make the runtime PM core use device PM QoS constraints to check if it is allowed to suspend a given device, so that an error code is returned if the device's own PM QoS constraint is negative or one of its children has already been suspended for too long. If this is not the case, the maximum estimated time the device is allowed to be suspended, computed as the minimum of the device's PM QoS constraint and the PM QoS constraints of its children (reduced by the difference between the current time and their suspend times) is stored in a new device's PM field power.max_time_suspended_ns that can be used by the device's subsystem or PM domain to decide whether or not to put the device into lower-power (and presumably higher-latency) states later (if the constraint is 0, which means "no constraint", the power.max_time_suspended_ns is set to -1). Additionally, the time of execution of the subsystem-level .runtime_suspend() callback for the device is recorded in the new power.suspend_time field for later use by the device's subsystem or PM domain along with power.max_time_suspended_ns (it also is used by the core code when the device's parent is suspended). Introduce a new helper function, pm_runtime_update_max_time_suspended(), allowing subsystems and PM domains (or device drivers) to update the power.max_time_suspended_ns field, for example after changing the power state of a suspended device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-01 00:01:31 +01:00
PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2 There are several drivers where the return value of pm_runtime_get_sync() is used to decide whether or not it is safe to access hardware and that don't provide .suspend() callbacks for system suspend (but may use late/noirq callbacks.) If such a driver happens to call pm_runtime_get_sync() during system suspend, after the core has disabled runtime PM, it will get the error code and will decide that the hardware should not be accessed, although this may be a wrong conclusion, depending on the state of the device when runtime PM was disabled. Drivers might work around this problem by using a test like: ret = pm_runtime_get_sync(dev); if (!ret || (ret == -EACCES && driver_private_data(dev)->suspended)) { /* access hardware */ } where driver_private_data(dev)->suspended is a flag set by the driver's .suspend() method (that would have to be added for this purpose). However, that potentially would need to be done by multiple drivers which means quite a lot of duplicated code and bloat. To avoid that we can use the observation that the core sets dev->power.is_suspended before disabling runtime PM and use that instead of the driver's private flag. Still, potentially many drivers would need to repeat that same check in quite a few places, so it's better to let the core do it. Then we can be a bit smarter and check whether or not runtime PM was disabled by the core only (disable_depth == 1) or by someone else in addition to the core (disable_depth > 1). In the former case rpm_resume() can return 1 if the runtime PM status is RPM_ACTIVE, because it means the device was active when the core disabled runtime PM. In the latter case it should still return -EACCES, because it isn't clear why runtime PM has been disabled. Tested on AM3730/Beagle-xM where a wakeup IRQ firing during the late suspend phase triggers runtime PM activity in the I2C driver since the wakeup IRQ is on an I2C-connected PMIC. [rjw: Modified whitespace to follow the file's convention.] Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-21 22:47:34 +00:00