linux

mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-20 18:15:29 +00:00

2945 lines

101 KiB

Raw Permalink Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00




[NET]: add a top-level Networking menu to config Create a new top-level menu named "Networking" thus moving net related options and protocol selection way from the drivers menu and up on the top-level where they belong. To implement this all architectures has to source "net/Kconfig" before drivers//Kconfig in their Kconfig file. This change has been implemented for all architectures. Device drivers for ordinary NIC's are still to be found in the Device Drivers section, but Bluetooth, IrDA and ax25 are located with their corresponding menu entries under the new networking menu item. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-11 21:03:49 -07:00
[PATCH] Kbuild menu - hide empty NETDEVICES menu when NET is disabled Make the whole netdevices menu depend on NET, rather than having an empty submenu when networking is disabled. Indeed, almost the whole body of the menu was surrounded by if NETDEVICES, and what was outside depended on NETCONSOLE which is inside the menu. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2006-02-03 01:45:21 -08:00
[NET]: add a top-level Networking menu to config Create a new top-level menu named "Networking" thus moving net related options and protocol selection way from the drivers menu and up on the top-level where they belong. To implement this all architectures has to source "net/Kconfig" before drivers//Kconfig in their Kconfig file. This change has been implemented for all architectures. Device drivers for ordinary NIC's are still to be found in the Device Drivers section, but Bluetooth, IrDA and ax25 are located with their corresponding menu entries under the new networking menu item. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-11 21:03:49 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
[PATCH] uml: arch Kconfig menu cleanups ) mark as "EXPERIMENTAL" various items that either aren't very stable or that are actively crashing the setup of users which don't really need them (i.e. HIGHMEM and 3-level pagetables on x86 - nobody needs either, everybody reports "I'm using it and getting trouble"). ) move net/Kconfig near to the rest of network configurations, and drivers/block/Kconfig near "Block layer" submenu. ) it's useless and doesn't work well to force NETDEVICES on and to disable the prompt like it's done. Better remove the attempt, and change that to a simple "default y if UML". ) drop the warning about "report problems about HPPFS" - it's redundant anyway, as that's the usual procedure, and HPPFS users are especially technical (i.e. they know reporting bugs is _good_). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2006-01-18 17:42:59 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00















[NETDEV] config: revert part of previous patch Net devices should depend on NETDEVICES, so revert part of Paolo's previous patch. See http://marc.theaimsgroup.com/?l=linux-kernel&m=115566326218740&w=2 for history. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2006-09-25 23:11:21 -07:00


[NET]: Improve presentation of networking driver families. Suggestion from Sam Ravnborg <sam@ravnborg.org> It causes all driver families to be displayed aligned immediately under the main network drivers heading (in menuconfig/xconfig/gconfig) instead of not being subordinate to (i.e., not indented) the Network device support heading at all. The improved network driver families are: token ring, wireless, PCMCIA, WAN, ATM, and S390. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-27 13:04:35 -07:00
[NET]: Add IFB (Intermediate Functional Block) network device. A new device to do intermidiate functional block in a system shared manner. To use the new functionality, you need to turn on qos/classifier actions. The new functionality can be grouped as: 1) qdiscs/policies that are per device as opposed to system wide. ifb allows for a device which can be redirected to thus providing an impression of sharing. 2) Allows for queueing incoming traffic for shaping instead of dropping. Packets are redirected to this device using tc/action mirred redirect construct. If they are sent to it by plain routing instead then they will merely be dropped and the stats would indicate that. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net> 2006-01-08 22:34:25 -08:00



Fix misc Kconfig typos Fix various Kconfig typos. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> 2006-11-30 05:22:59 +01:00
[NET]: Add IFB (Intermediate Functional Block) network device. A new device to do intermidiate functional block in a system shared manner. To use the new functionality, you need to turn on qos/classifier actions. The new functionality can be grouped as: 1) qdiscs/policies that are per device as opposed to system wide. ifb allows for a device which can be redirected to thus providing an impression of sharing. 2) Allows for queueing incoming traffic for shaping instead of dropping. Packets are redirected to this device using tc/action mirred redirect construct. If they are sent to it by plain routing instead then they will merely be dropped and the stats would indicate that. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net> 2006-01-08 22:34:25 -08:00







Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00



























[PATCH] trivial: fix spelling errors in Kconfigs This patch corrects a few spelling and grammar errors found in drivers/net Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 2006-02-12 11:53:04 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00


















































[NET]: Improve presentation of networking driver families. Suggestion from Sam Ravnborg <sam@ravnborg.org> It causes all driver families to be displayed aligned immediately under the main network drivers heading (in menuconfig/xconfig/gconfig) instead of not being subordinate to (i.e., not indented) the Network device support heading at all. The improved network driver families are: token ring, wireless, PCMCIA, WAN, ATM, and S390. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-27 13:04:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00




















[PATCH] drivers/net/Kconfig: indentation fix This patch fixes a wrong indentation. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2006-01-05 22:45:41 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-07-30 19:31:23 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00




[NET]: Improve presentation of networking driver families. Suggestion from Sam Ravnborg <sam@ravnborg.org> It causes all driver families to be displayed aligned immediately under the main network drivers heading (in menuconfig/xconfig/gconfig) instead of not being subordinate to (i.e., not indented) the Network device support heading at all. The improved network driver families are: token ring, wireless, PCMCIA, WAN, ATM, and S390. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-27 13:04:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00


































[PATCH] Atmel MACB ethernet driver Driver for the Atmel MACB on-chip ethernet module. Tested on AVR32/AT32AP7000/ATSTK1000. I've heard rumours that it works with AT91SAM9260 as well, and it may be possible to share some code with the at91_ether driver for AT91RM9200. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since previous version: * Probe for PHY ID instead of depending on it being provided through platform_data. * Grab initial ethernet address from the MACB registers instead of depending on platform_data. * Set MII/RMII mode correctly. These changes are mostly about making the driver more compatible with the at91 infrastructure. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-11-09 14:51:17 +01:00

AT91: MACB support The Atmel MACB Ethernet peripheral is also integrated in the AT91SAM9260 and AT91SAM9263 processors. The differences from the AVR32 version are: * Single peripheral clock. * MII/RMII selection bit is inverted. * Clock enable bit. Original patch from Patrice Vilchez. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-02-07 16:40:44 +01:00
[PATCH] Atmel MACB ethernet driver Driver for the Atmel MACB on-chip ethernet module. Tested on AVR32/AT32AP7000/ATSTK1000. I've heard rumours that it works with AT91SAM9260 as well, and it may be possible to share some code with the at91_ether driver for AT91RM9200. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since previous version: * Probe for PHY ID instead of depending on it being provided through platform_data. * Grab initial ethernet address from the MACB registers instead of depending on platform_data. * Set MII/RMII mode correctly. These changes are mostly about making the driver more compatible with the at91 infrastructure. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-11-09 14:51:17 +01:00







Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00




















































































































































































































[PATCH] (15/22) Kconfig fix (82596) driver is non-modular Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-08-25 06:24:56 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
















[PARISC] Make Lasi Ethernet depend on GSC only If we separate out LASI and ASP support later, we'll need this. Plus, this makes it consistent with the ncr700 scsi driver. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> 2006-11-18 10:05:16 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
[PARISC] Make Lasi Ethernet depend on GSC only If we separate out LASI and ASP support later, we'll need this. Plus, this makes it consistent with the ncr700 scsi driver. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> 2006-11-18 10:05:16 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00










[PATCH] net: au1000_eth: PHY framework conversion convert au1000_eth driver to use PHY framework and garbage collected functions and identifiers that became unused/obsolete in the process Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-06-01 09:41:04 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00










[PATCH] IOC: And don't mark the things as broken Cowboy. And don't mark the things as broken Cowboy. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-11-08 19:10:24 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00


























[PATCH] mipsnet: Virtual ethernet driver for MIPSsim. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/Kconfig \| 8 + drivers/net/Makefile \| 1 drivers/net/mipsnet.c \| 371 ++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/mipsnet.h \| 127 +++++++++++++++++ 4 files changed, 507 insertions(+) Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-10 14:51:27 +01:00

[PATCH] Kconfig: remove redundant NETDEVICES depends drivers/net/Kconfig says: # All the following symbols are dependent on NETDEVICES - do not repeat # that for each of the symbols. so remove duplicate 'depends' uses of NETDEVICES. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-11-01 21:18:58 -08:00
[PATCH] mipsnet: Virtual ethernet driver for MIPSsim. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/Kconfig \| 8 + drivers/net/Makefile \| 1 drivers/net/mipsnet.c \| 371 ++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/mipsnet.h \| 127 +++++++++++++++++ 4 files changed, 507 insertions(+) Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-10 14:51:27 +01:00




Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00








































































[NET]: Add Sun Cassini driver. Written by Adrian Sun (asun@darksunrising.com). Ported to 2.6.x by Tom 'spot' Callaway <tcallawa@redhat.com>. Further cleaned up and integrated by David S. Miller Signed-off-by: David S. Miller <davem@davemloft.net> 2005-09-27 15:24:13 -07:00







Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00










































[PATCH] ISA DMA Kconfig fixes - part 3 Drivers that expect ISA DMA API are marked as such in Kconfig. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2005-05-04 05:39:42 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00







































[PATCH] ISA DMA Kconfig fixes - part 3 Drivers that expect ISA DMA API are marked as such in Kconfig. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2005-05-04 05:39:42 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00





































[PATCH] trivial: fix spelling errors in Kconfigs This patch corrects a few spelling and grammar errors found in drivers/net Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 2006-02-12 11:53:04 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00




































[PATCH] ISA DMA Kconfig fixes - part 3 Drivers that expect ISA DMA API are marked as such in Kconfig. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2005-05-04 05:39:42 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00




















































































[PATCH] smc91x: DB1200 support. The following patch support the SMC9111 present on DB1200 boards. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-11-09 22:46:05 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00




























[PATCH] network driver for Hilscher netx This is a patch for the Hilscher netx builtin ethernet ports. The netx board support was merged into 2.6.17-git2. The netx is a arm926 based SoC. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> -- drivers/net/Kconfig \| 11 drivers/net/Makefile \| 1 drivers/net/netx-eth.c \| 516 ++++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-netx/eth.h \| 27 ++ 4 files changed, 555 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-06-22 07:11:13 +02:00










[PATCH] DM9000 network driver This patch adds support for the davicom dm9000 network driver. The dm9000 is found on some embedded arm boards such as the pimx1 or the scb9328. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null drivers/net/dm9000.c 2005-05-05 15:14:15 -07:00

[PATCH] Add MIPS dependency for dm9000 driver Add MIPS dependency for dm9000 ethernet controller. Indeed this controller is used by some embedded platforms based on MIPS CPUs. Signed-off-by: Franck Bui-Huu <franck.bui@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2006-01-05 22:45:39 -08:00
[PATCH] DM9000 network driver This patch adds support for the davicom dm9000 network driver. The dm9000 is found on some embedded arm boards such as the pimx1 or the scb9328. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null drivers/net/dm9000.c 2005-05-05 15:14:15 -07:00








[PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips > > The patch was badly wordwrapped. Please fix and resend. > OK, I've fixed the wrapping and removed the CONFIG_ARM restriction. I've also did my best to modify the C style to conform to the comments. I noticed that the patch is getting ignored by majordomo due to its size >100K. Should it be broken up somehow to allow posting to the lists? Signed-off-by: Dustin McIntire <dustin@sensoria.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-04-19 20:24:51 -07:00



[PATCH] smc911x Kconfig fix In file included from drivers/net/smc911x.c:84: drivers/net/smc911x.h:46:9: warning: "SMC_USE_16BIT" is not defined drivers/net/smc911x.h:60:9: warning: "SMC_USE_32BIT" is not defined drivers/net/smc911x.h:73:10: warning: "SMC_USE_PXA_DMA" is not defined drivers/net/smc911x.c: In function `smc911x_reset': drivers/net/smc911x.c:247: warning: implicit declaration of function `SMC_inl' drivers/net/smc911x.c:249: warning: implicit declaration of function `SMC_outl' Cc: Dustin McIntire <dustin@sensoria.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-06-08 22:19:41 -07:00
[PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips > > The patch was badly wordwrapped. Please fix and resend. > OK, I've fixed the wrapping and removed the CONFIG_ARM restriction. I've also did my best to modify the C style to conform to the comments. I noticed that the patch is getting ignored by majordomo due to its size >100K. Should it be broken up somehow to allow posting to the lists? Signed-off-by: Dustin McIntire <dustin@sensoria.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-04-19 20:24:51 -07:00










Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00







































[PATCH] ISA DMA Kconfig fixes - part 3 Drivers that expect ISA DMA API are marked as such in Kconfig. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2005-05-04 05:39:42 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00


















































































































[PATCH] trivial: fix spelling errors in Kconfigs This patch corrects a few spelling and grammar errors found in drivers/net Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 2006-02-12 11:53:04 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
































































[PATCH] NE2000 Kconfig help entry improvement Improve reference to PCI NE2K support in ISA NE2K documentation. Original 2.4 patch From: Ged Haywood <ged@jubileegroup.co.uk> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-03-08 00:06:31 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00









[PATCH] ISA DMA Kconfig fixes - part 3 Drivers that expect ISA DMA API are marked as such in Kconfig. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2005-05-04 05:39:42 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00

















































[NET]: Improve presentation of networking driver families. Suggestion from Sam Ravnborg <sam@ravnborg.org> It causes all driver families to be displayed aligned immediately under the main network drivers heading (in menuconfig/xconfig/gconfig) instead of not being subordinate to (i.e., not indented) the Network device support heading at all. The improved network driver families are: token ring, wireless, PCMCIA, WAN, ATM, and S390. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-27 13:04:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00








[PATCH] New PowerPC 4xx on-chip ethernet controller driver This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> -- Kconfig \| 72 ibm_emac/Makefile \| 13 ibm_emac/ibm_emac.h \| 418 +++-- ibm_emac/ibm_emac_core.c \| 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h \| 313 ++-- ibm_emac/ibm_emac_debug.c \| 377 ++--- ibm_emac/ibm_emac_debug.h \| 63 ibm_emac/ibm_emac_mal.c \| 674 +++++---- ibm_emac/ibm_emac_mal.h \| 336 +++- ibm_emac/ibm_emac_phy.c \| 335 ++-- ibm_emac/ibm_emac_phy.h \| 105 - ibm_emac/ibm_emac_rgmii.c \| 201 ++ ibm_emac/ibm_emac_rgmii.h \| 68 ibm_emac/ibm_emac_tah.c \| 111 + ibm_emac/ibm_emac_tah.h \| 96 - ibm_emac/ibm_emac_zmii.c \| 255 +++ ibm_emac/ibm_emac_zmii.h \| 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-10 16:58:14 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
[PATCH] New PowerPC 4xx on-chip ethernet controller driver This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> -- Kconfig \| 72 ibm_emac/Makefile \| 13 ibm_emac/ibm_emac.h \| 418 +++-- ibm_emac/ibm_emac_core.c \| 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h \| 313 ++-- ibm_emac/ibm_emac_debug.c \| 377 ++--- ibm_emac/ibm_emac_debug.h \| 63 ibm_emac/ibm_emac_mal.c \| 674 +++++---- ibm_emac/ibm_emac_mal.h \| 336 +++- ibm_emac/ibm_emac_phy.c \| 335 ++-- ibm_emac/ibm_emac_phy.h \| 105 - ibm_emac/ibm_emac_rgmii.c \| 201 ++ ibm_emac/ibm_emac_rgmii.h \| 68 ibm_emac/ibm_emac_tah.c \| 111 + ibm_emac/ibm_emac_tah.h \| 96 - ibm_emac/ibm_emac_zmii.c \| 255 +++ ibm_emac/ibm_emac_zmii.h \| 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-10 16:58:14 -07:00


Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00



[PATCH] New PowerPC 4xx on-chip ethernet controller driver This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> -- Kconfig \| 72 ibm_emac/Makefile \| 13 ibm_emac/ibm_emac.h \| 418 +++-- ibm_emac/ibm_emac_core.c \| 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h \| 313 ++-- ibm_emac/ibm_emac_debug.c \| 377 ++--- ibm_emac/ibm_emac_debug.h \| 63 ibm_emac/ibm_emac_mal.c \| 674 +++++---- ibm_emac/ibm_emac_mal.h \| 336 +++- ibm_emac/ibm_emac_phy.c \| 335 ++-- ibm_emac/ibm_emac_phy.h \| 105 - ibm_emac/ibm_emac_rgmii.c \| 201 ++ ibm_emac/ibm_emac_rgmii.h \| 68 ibm_emac/ibm_emac_tah.c \| 111 + ibm_emac/ibm_emac_tah.h \| 96 - ibm_emac/ibm_emac_zmii.c \| 255 +++ ibm_emac/ibm_emac_zmii.h \| 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-10 16:58:14 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00



[PATCH] New PowerPC 4xx on-chip ethernet controller driver This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> -- Kconfig \| 72 ibm_emac/Makefile \| 13 ibm_emac/ibm_emac.h \| 418 +++-- ibm_emac/ibm_emac_core.c \| 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h \| 313 ++-- ibm_emac/ibm_emac_debug.c \| 377 ++--- ibm_emac/ibm_emac_debug.h \| 63 ibm_emac/ibm_emac_mal.c \| 674 +++++---- ibm_emac/ibm_emac_mal.h \| 336 +++- ibm_emac/ibm_emac_phy.c \| 335 ++-- ibm_emac/ibm_emac_phy.h \| 105 - ibm_emac/ibm_emac_rgmii.c \| 201 ++ ibm_emac/ibm_emac_rgmii.h \| 68 ibm_emac/ibm_emac_tah.c \| 111 + ibm_emac/ibm_emac_tah.h \| 96 - ibm_emac/ibm_emac_zmii.c \| 255 +++ ibm_emac/ibm_emac_zmii.h \| 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-10 16:58:14 -07:00





Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
[PATCH] New PowerPC 4xx on-chip ethernet controller driver This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> -- Kconfig \| 72 ibm_emac/Makefile \| 13 ibm_emac/ibm_emac.h \| 418 +++-- ibm_emac/ibm_emac_core.c \| 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h \| 313 ++-- ibm_emac/ibm_emac_debug.c \| 377 ++--- ibm_emac/ibm_emac_debug.h \| 63 ibm_emac/ibm_emac_mal.c \| 674 +++++---- ibm_emac/ibm_emac_mal.h \| 336 +++- ibm_emac/ibm_emac_phy.c \| 335 ++-- ibm_emac/ibm_emac_phy.h \| 105 - ibm_emac/ibm_emac_rgmii.c \| 201 ++ ibm_emac/ibm_emac_rgmii.h \| 68 ibm_emac/ibm_emac_tah.c \| 111 + ibm_emac/ibm_emac_tah.h \| 96 - ibm_emac/ibm_emac_zmii.c \| 255 +++ ibm_emac/ibm_emac_zmii.h \| 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-10 16:58:14 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
[PATCH] New PowerPC 4xx on-chip ethernet controller driver This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> -- Kconfig \| 72 ibm_emac/Makefile \| 13 ibm_emac/ibm_emac.h \| 418 +++-- ibm_emac/ibm_emac_core.c \| 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h \| 313 ++-- ibm_emac/ibm_emac_debug.c \| 377 ++--- ibm_emac/ibm_emac_debug.h \| 63 ibm_emac/ibm_emac_mal.c \| 674 +++++---- ibm_emac/ibm_emac_mal.h \| 336 +++- ibm_emac/ibm_emac_phy.c \| 335 ++-- ibm_emac/ibm_emac_phy.h \| 105 - ibm_emac/ibm_emac_rgmii.c \| 201 ++ ibm_emac/ibm_emac_rgmii.h \| 68 ibm_emac/ibm_emac_tah.c \| 111 + ibm_emac/ibm_emac_tah.h \| 96 - ibm_emac/ibm_emac_zmii.c \| 255 +++ ibm_emac/ibm_emac_zmii.h \| 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-10 16:58:14 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
[PATCH] New PowerPC 4xx on-chip ethernet controller driver This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> -- Kconfig \| 72 ibm_emac/Makefile \| 13 ibm_emac/ibm_emac.h \| 418 +++-- ibm_emac/ibm_emac_core.c \| 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h \| 313 ++-- ibm_emac/ibm_emac_debug.c \| 377 ++--- ibm_emac/ibm_emac_debug.h \| 63 ibm_emac/ibm_emac_mal.c \| 674 +++++---- ibm_emac/ibm_emac_mal.h \| 336 +++- ibm_emac/ibm_emac_phy.c \| 335 ++-- ibm_emac/ibm_emac_phy.h \| 105 - ibm_emac/ibm_emac_rgmii.c \| 201 ++ ibm_emac/ibm_emac_rgmii.h \| 68 ibm_emac/ibm_emac_tah.c \| 111 + ibm_emac/ibm_emac_tah.h \| 96 - ibm_emac/ibm_emac_zmii.c \| 255 +++ ibm_emac/ibm_emac_zmii.h \| 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-10 16:58:14 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00

[PATCH] New PowerPC 4xx on-chip ethernet controller driver This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> -- Kconfig \| 72 ibm_emac/Makefile \| 13 ibm_emac/ibm_emac.h \| 418 +++-- ibm_emac/ibm_emac_core.c \| 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h \| 313 ++-- ibm_emac/ibm_emac_debug.c \| 377 ++--- ibm_emac/ibm_emac_debug.h \| 63 ibm_emac/ibm_emac_mal.c \| 674 +++++---- ibm_emac/ibm_emac_mal.h \| 336 +++- ibm_emac/ibm_emac_phy.c \| 335 ++-- ibm_emac/ibm_emac_phy.h \| 105 - ibm_emac/ibm_emac_rgmii.c \| 201 ++ ibm_emac/ibm_emac_rgmii.h \| 68 ibm_emac/ibm_emac_tah.c \| 111 + ibm_emac/ibm_emac_tah.h \| 96 - ibm_emac/ibm_emac_zmii.c \| 255 +++ ibm_emac/ibm_emac_zmii.h \| 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-10 16:58:14 -07:00


[PATCH] trivial: fix spelling errors in Kconfigs This patch corrects a few spelling and grammar errors found in drivers/net Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 2006-02-12 11:53:04 -06:00
[PATCH] New PowerPC 4xx on-chip ethernet controller driver This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> -- Kconfig \| 72 ibm_emac/Makefile \| 13 ibm_emac/ibm_emac.h \| 418 +++-- ibm_emac/ibm_emac_core.c \| 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h \| 313 ++-- ibm_emac/ibm_emac_debug.c \| 377 ++--- ibm_emac/ibm_emac_debug.h \| 63 ibm_emac/ibm_emac_mal.c \| 674 +++++---- ibm_emac/ibm_emac_mal.h \| 336 +++- ibm_emac/ibm_emac_phy.c \| 335 ++-- ibm_emac/ibm_emac_phy.h \| 105 - ibm_emac/ibm_emac_rgmii.c \| 201 ++ ibm_emac/ibm_emac_rgmii.h \| 68 ibm_emac/ibm_emac_tah.c \| 111 + ibm_emac/ibm_emac_tah.h \| 96 - ibm_emac/ibm_emac_zmii.c \| 255 +++ ibm_emac/ibm_emac_zmii.h \| 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-10 16:58:14 -07:00





[PATCH] PPC 44x EMAC driver: add 440GR support Add PowerPC 440GR support Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-29 12:45:31 -07:00
[PATCH] New PowerPC 4xx on-chip ethernet controller driver This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> -- Kconfig \| 72 ibm_emac/Makefile \| 13 ibm_emac/ibm_emac.h \| 418 +++-- ibm_emac/ibm_emac_core.c \| 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h \| 313 ++-- ibm_emac/ibm_emac_debug.c \| 377 ++--- ibm_emac/ibm_emac_debug.h \| 63 ibm_emac/ibm_emac_mal.c \| 674 +++++---- ibm_emac/ibm_emac_mal.h \| 336 +++- ibm_emac/ibm_emac_phy.c \| 335 ++-- ibm_emac/ibm_emac_phy.h \| 105 - ibm_emac/ibm_emac_rgmii.c \| 201 ++ ibm_emac/ibm_emac_rgmii.h \| 68 ibm_emac/ibm_emac_tah.c \| 111 + ibm_emac/ibm_emac_tah.h \| 96 - ibm_emac/ibm_emac_zmii.c \| 255 +++ ibm_emac/ibm_emac_zmii.h \| 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-10 16:58:14 -07:00


























Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00




























[PATCH] pcnet32: NAPI implementation Implement NAPI changes to pcnet32 driver. Compile default is off. Listed as experimental. Len and Don both worked on a NAPI implementation and have both tested these changes. An e1000 blasting short packets to the pcnet32 will lockup Don's system until the receive storm stops. Without NAPI Len's system watchdog would expire causing the system to reboot. With NAPI the system will stay operational. Tested ia32 and ppc64. Tested '970A, '971, '972, '973, '975, '976, and '978. The Kconfig changes came from Len. Don is to blame for all the others. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-09-13 10:16:53 -07:00
pcnet32 NAPI no longer experimental Remove the experimental tag for the pcnet32 NAPI implementation. Signed-off-by: Don Fry <pcnet32@verizon.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-02-16 10:09:57 -06:00

[PATCH] pcnet32: NAPI implementation Implement NAPI changes to pcnet32 driver. Compile default is off. Listed as experimental. Len and Don both worked on a NAPI implementation and have both tested these changes. An e1000 blasting short packets to the pcnet32 will lockup Don's system until the receive storm stops. Without NAPI Len's system watchdog would expire causing the system to reboot. With NAPI the system will stay operational. Tested ia32 and ppc64. Tested '970A, '971, '972, '973, '975, '976, and '978. The Kconfig changes came from Len. Don is to blame for all the others. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-09-13 10:16:53 -07:00













Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00






















































































[PATCH] b44: update b44 Kconfig entry Deleted "EXPERIMENTAL" from b44 entry in Kconfig. Signed-off-by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-06-20 15:34:46 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00










[PATCH] CONFIG_FORCEDETH updates This patch contains the following possible updates: - let FORCEDETH no longer depend on EXPERIMENTAL - remove the "Reverse Engineered" from the option text: for the user it's important which hardware the driver supports, not how it was developed Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-03-08 00:06:30 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00








[PATCH] forcdeth: revised NAPI support Revised version of the forcedeth NAPI support. This version is based against netdev-2.6#upstream (after the MAC patches from Ayaz today). Can't use nv_disable_hw_interrupts because NAPI only wants to mask off receive irq's and leave the others alone. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-07-31 20:37:19 -07:00















Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00


[PATCH] cs89x0: add ixdp2351 support This patch adds support for the Intel IXDP2351 to the CS89x0 driver. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2006-01-14 13:21:18 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00








[PATCH] cs89x0: Fix the Kconfig help text Fix the help text of the cs89x0 network driver Kconfig entry. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2006-01-11 12:17:36 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00




























































































































































[PATCH] document that 8139TOO supports 8129/8130 The 8129/8130 support is a sub-option that is not visible if the user hasn't enabled the 8139 support. Let's make it a bit easier for users to find the driver for their nic. Signed-off-by: Adrian Bunk <bunk@stusta.de> 2005-05-16 21:13:03 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00




[PATCH] document that 8139TOO supports 8129/8130 The 8129/8130 support is a sub-option that is not visible if the user hasn't enabled the 8139 support. Let's make it a bit easier for users to find the driver for their nic. Signed-off-by: Adrian Bunk <bunk@stusta.de> 2005-05-16 21:13:03 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00















































[PATCH] SIS900 must select MII This patch fixes the following compile error caused by bk-netdev: <-- snip --> ... LD .tmp_vmlinux1 drivers/built-in.o(.text+0x98528): In function `sis900_get_settings': : undefined reference to `mii_ethtool_gset' drivers/built-in.o(.text+0x98538): In function `sis900_set_settings': : undefined reference to `mii_ethtool_sset' drivers/built-in.o(.text+0x98517): In function `sis900_get_link': : undefined reference to `mii_link_ok' drivers/built-in.o(.text+0x98547): In function `sis900_nway_reset': : undefined reference to `mii_nway_restart' make: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Daniele Venzano <venza@brownhat.org> 2005-04-30 13:52:49 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00


[PATCH] remove obsolete sis900 documentation This documentation is mostly obsolete, and should therefore either be updated or removed (this patch does the latter). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-03-04 17:07:57 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
















































































[PATCH] via-rhine: NAPI support Add NAPI support to the via-rhine driver so that it can handle higher speeds and doesn't get overloaded by interrupts as easily. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Roger Luethi <rl@hellgate.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-08-14 23:00:17 -07:00












Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00

[PATCH] drivers/net: SAA9730: Fix build error Confusingly NET_PCI is also set for for non-PCI EISA configurations where building this driver will result in a build error due to a reference to pci_release_regions. While at it, remove the EXPERIMENTAL - in all its uglyness and despite the sincerest attempts of the buggy hardware the driver is known to work. Also limit the driver to the Atlas board - the only known system to ever use the SAA9730 before Phillips ended the short live of the SAA9730. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-11-29 17:10:38 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00





driver for Silan SC92031 netdev This is a driver for the Silan SC92031/Rsltek 8139D NIC chip. This chip is found on at least one counterfeit Encore ENL832-TX-RENT NIC [1], which came with a mini-CD with the 2.4 driver. A slightly older version of the driver was found at [2]. The main difference between them is that the newer one has a small bugfix in the RX path, a lot of gratuitous renaming of functions, all the printable strings changed to show as a "Rsltek 8139D" [sic], and a PCI ID of 8139 instead of 2031. The driver on this patch is a rewrite of the vendor drivers (based mostly on the older one). Changes from the previous patch sent to netdev: - Use MMIO instead of PIO - Changed TX bounce buffers allocation - Use skb_copy_and_csum_dev - Several small bug fixes - Tested for more than just a few minutes each time [1] See http://www.encore-usa.com/faq.php under ENL832-TX-RENT for more information [2] Look for SL_LINUX.ZIP (which is really a .tar.gz) at http://broadbandforum.in/dataone_Intex_LAN_cardlinux-t4207-s15.html [3] To compile on 2.6.17, simply add back the last argument to the interrupt handler in two places, and copy the boolean declarations from 2.6.19 [akpm@osdl.org: build fixes] Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-12-19 13:08:47 -08:00











Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00

[PATCH] net/Kconfig: convert pocket_adapter ISA to PARPORT This patch changes pocket and parallel adaptors to depend on PARPORT instead of ISA in order to get the option in newer SuperIO based systems. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-09-10 00:14:05 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00






















[PATCH] net/Kconfig: convert pocket_adapter ISA to PARPORT This patch changes pocket and parallel adaptors to depend on PARPORT instead of ISA in order to get the option in newer SuperIO based systems. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-09-10 00:14:05 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00













[PATCH] net/Kconfig: convert pocket_adapter ISA to PARPORT This patch changes pocket and parallel adaptors to depend on PARPORT instead of ISA in order to get the option in newer SuperIO based systems. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-09-10 00:14:05 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00













[PATCH] net/Kconfig: convert pocket_adapter ISA to PARPORT This patch changes pocket and parallel adaptors to depend on PARPORT instead of ISA in order to get the option in newer SuperIO based systems. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-09-10 00:14:05 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00



































[PATCH] m68knommu: config support for FEC eth of 523x Coldfire processor family Add configuration support for the FEC ethernet controller in the Freescale 523x processor family. Also add and option to configure the second FEC controller on some Freescale processors. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2005-09-12 11:18:10 +10:00
[PATCH] m68knommu: allow configure of FEC for M520x CPU family Allow the ColdFire FEC ethernet driver to be enabled on the M520x CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2006-01-10 16:58:16 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00

[PATCH] m68knommu: config support for FEC eth of 523x Coldfire processor family Add configuration support for the FEC ethernet controller in the Freescale 523x processor family. Also add and option to configure the second FEC controller on some Freescale processors. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2005-09-12 11:18:10 +10:00







Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00








Add fs_enet ethernet network driver, for several embedded platforms. 2005-10-28 16:25:58 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00







[NET]: Improve presentation of networking driver families. Suggestion from Sam Ravnborg <sam@ravnborg.org> It causes all driver families to be displayed aligned immediately under the main network drivers heading (in menuconfig/xconfig/gconfig) instead of not being subordinate to (i.e., not indented) the Network device support heading at all. The improved network driver families are: token ring, wireless, PCMCIA, WAN, ATM, and S390. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-27 13:04:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00















































































[PATCH] e1000: Added disable packet split capability Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2006-01-18 13:01:30 -08:00




Fix spelling in E1000_DISABLE_PACKET_SPLIT Kconfig description Signed-off-by: Adrian Bunk <bunk@stusta.de> 2006-03-22 00:51:11 +01:00
[PATCH] e1000: Added disable packet split capability Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2006-01-18 13:01:30 -08:00


[PATCH] intel ixp2000 network driver The way the hardware and firmware work is that there is one shared RX queue and IRQ for a number of different network interfaces. Due to this, we would like to process received packets for every interface in the same NAPI poll handler, so we need a pseudo-device to schedule polling on. What the driver currently does is that it always schedules polling for the first network interface in the list, and processes packets for every interface in the poll handler for that first interface -- however, this scheme breaks down if the first network interface happens to not be up, since netif_rx_schedule_prep() checks netif_running(). sky2 apparently has the same issue, and Stephen Hemminger suggested a way to work around this: create a variant of netif_rx_schedule_prep() that does not check netif_running(). I implemented this locally and called it netif_rx_schedule_prep_notup(), and it seems to work well, but it's something that probably not everyone would be happy with. The ixp2000 is an ARM CPU with a high-speed network interface in the CPU itself (full duplex 4Gb/s or 10Gb/s depending on the IXP model.) The CPU package also contains 8 or 16 (again depending on the IXP model) 'microengines', which are somewhat primitive but very fast and efficient processor cores which can be used to offload various things from the main CPU. This driver makes the high-speed network interface in the CPU visible and usable as a regular linux network device. Currently, it only supports the Radisys ENP2611 IXP board, but adding support for other board types should be fairly easy. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-11-11 18:23:13 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00









[PATCH] trivial: fix spelling errors in Kconfigs This patch corrects a few spelling and grammar errors found in drivers/net Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 2006-02-12 11:53:04 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00






































































[PATCH] sis190: resurrection Raise the sis190 driver from the dead The driver handles the integrated network device found on SiS 965L chipset. It follows the classical (non-napi) interrupt-driven model and provides minimal ethtool support. The code comes from a heavy cleanup/rewrite of the original code which was removed from the kernel on 14/04/2004. Since the r8169 driver does not work too bad and there will probably be (at least) a few months of improvements/testing/fixing, I made the code as close as possible to the r8169 one. Pascal Chapperon <pascal.chapperon@wanadoo.fr> deserves some special credit for testing and bug-catching. Many thanks to Lars Vahlenberg as well. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-07-30 13:08:43 +02:00
[PATCH] sis190: basic sis191 support The sis191 is the gigabit brother of the sis190. SiS's driver suggests that the register set is backward compatible: this should hopefully give a basic driver. The device should allow the usual features from a modern ethernet adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far the relevant register layout is not documented. SiS's driver does not provide these features either (at least not for Linux). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-09-03 00:57:51 +02:00
[PATCH] SIS190 must select MII SIS190 must select MII since it's using it. While I was editing the Kconfig entry, I also converted the spaces to tabs. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-08-09 02:41:00 +02:00



[PATCH] sis190: basic sis191 support The sis191 is the gigabit brother of the sis190. SiS's driver suggests that the register set is backward compatible: this should hopefully give a basic driver. The device should allow the usual features from a modern ethernet adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far the relevant register layout is not documented. SiS's driver does not provide these features either (at least not for Linux). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-09-03 00:57:51 +02:00



[PATCH] SIS190 must select MII SIS190 must select MII since it's using it. While I was editing the Kconfig entry, I also converted the spaces to tabs. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-08-09 02:41:00 +02:00


[PATCH] sis190: resurrection Raise the sis190 driver from the dead The driver handles the integrated network device found on SiS 965L chipset. It follows the classical (non-napi) interrupt-driven model and provides minimal ethtool support. The code comes from a heavy cleanup/rewrite of the original code which was removed from the kernel on 14/04/2004. Since the r8169 driver does not work too bad and there will probably be (at least) a few months of improvements/testing/fixing, I made the code as close as possible to the r8169 one. Pascal Chapperon <pascal.chapperon@wanadoo.fr> deserves some special credit for testing and bug-catching. Many thanks to Lars Vahlenberg as well. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-07-30 13:08:43 +02:00
[netdrvr] new driver skge, for SysKonnect cards 2005-05-12 20:14:36 -04:00
[PATCH] skge: no longer experimental Take the experimental dependency of skge driver, it is as stable as the others. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2006-02-13 15:48:08 -08:00

[netdrvr] new driver skge, for SysKonnect cards 2005-05-12 20:14:36 -04:00



[PATCH] skge: gmac register access errors in dual port Merge of four previous patches and the Kconfig fix * Remove debug printk's * whitespace cleanup and version number change * clear interrupts, reset phy, and reset hardware on shutdown * ignore 64bit counter overflow interrupts * fix a couple of places where second port could clobber state of first port. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-09-09 12:54:56 -07:00
[netdrvr] new driver skge, for SysKonnect cards 2005-05-12 20:14:36 -04:00


[PATCH] sky2: new experimental Marvell Yukon2 driver New driver for the Marvell Yukon2 Gigabit Ethernet chipset. This driver is based on the skge driver, but using the logic from the SysKonnect version of the sk98lin driver. It should support all the Yukon2 chipsets that are available in many current Intel and AMD motherboards. The driver does support ethtool, tx and rx checksum, and tcp segmentation offload. But it has only been tested for a short while and is known to stop receiving under heavy load. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-08-16 16:36:49 -07:00
[PATCH] Clarify help text of SKGE/SK98LIN/SKY2 Some users have commented that it is unclear which driver they should be using for their Marvell/SysKonnect network adapter, and which ones are/aren't interchangable. This patch attempts to reduce the confusion. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2006-01-21 19:35:34 +00:00








[PATCH] sky2: new experimental Marvell Yukon2 driver New driver for the Marvell Yukon2 Gigabit Ethernet chipset. This driver is based on the skge driver, but using the logic from the SysKonnect version of the sk98lin driver. It should support all the Yukon2 chipsets that are available in many current Intel and AMD motherboards. The driver does support ethtool, tx and rx checksum, and tcp segmentation offload. But it has only been tested for a short while and is known to stop receiving under heavy load. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-08-16 16:36:49 -07:00


[PATCH] sky2: not experimental The sky2 driver is no longer in experimental state. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-10-27 10:22:10 -07:00
[PATCH] sky2: new experimental Marvell Yukon2 driver New driver for the Marvell Yukon2 Gigabit Ethernet chipset. This driver is based on the skge driver, but using the logic from the SysKonnect version of the sk98lin driver. It should support all the Yukon2 chipsets that are available in many current Intel and AMD motherboards. The driver does support ethtool, tx and rx checksum, and tcp segmentation offload. But it has only been tested for a short while and is known to stop receiving under heavy load. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-08-16 16:36:49 -07:00

Still more typo fixes Signed-off-by: Adrian Bunk <bunk@stusta.de> 2006-10-03 22:36:44 +02:00
[PATCH] Clarify help text of SKGE/SK98LIN/SKY2 Some users have commented that it is unclear which driver they should be using for their Marvell/SysKonnect network adapter, and which ones are/aren't interchangable. This patch attempts to reduce the confusion. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2006-01-21 19:35:34 +00:00



[PATCH] sky2: not experimental The sky2 driver is no longer in experimental state. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-10-27 10:22:10 -07:00

[PATCH] sky2: new experimental Marvell Yukon2 driver New driver for the Marvell Yukon2 Gigabit Ethernet chipset. This driver is based on the skge driver, but using the logic from the SysKonnect version of the sk98lin driver. It should support all the Yukon2 chipsets that are available in many current Intel and AMD motherboards. The driver does support ethtool, tx and rx checksum, and tcp segmentation offload. But it has only been tested for a short while and is known to stop receiving under heavy load. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-08-16 16:36:49 -07:00



Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
sk98lin: mark deprecated in Kconfig sk98lin is scheduled for removal in July 2007. This patch makes the deprecation more obvious in the configuration interface. FWIW, Gentoo have been shipping a patch very similar to this for a long time. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-02-10 03:48:17 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00


[PATCH] Clarify help text of SKGE/SK98LIN/SKY2 Some users have commented that it is unclear which driver they should be using for their Marvell/SysKonnect network adapter, and which ones are/aren't interchangable. This patch attempts to reduce the confusion. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2006-01-21 19:35:34 +00:00

sk98lin: mark deprecated in Kconfig sk98lin is scheduled for removal in July 2007. This patch makes the deprecation more obvious in the configuration interface. FWIW, Gentoo have been shipping a patch very similar to this for a long time. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-02-10 03:48:17 +00:00



[PATCH] Clarify help text of SKGE/SK98LIN/SKY2 Some users have commented that it is unclear which driver they should be using for their Marvell/SysKonnect network adapter, and which ones are/aren't interchangable. This patch attempts to reduce the confusion. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2006-01-21 19:35:34 +00:00
Fix misc Kconfig typos Fix various Kconfig typos. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> 2006-11-30 05:22:59 +01:00
[PATCH] Clarify help text of SKGE/SK98LIN/SKY2 Some users have commented that it is unclear which driver they should be using for their Marvell/SysKonnect network adapter, and which ones are/aren't interchangable. This patch attempts to reduce the confusion. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2006-01-21 19:35:34 +00:00


Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00



























































































[BNX2]: New Broadcom gigabit network driver. A new driver bnx2 for Broadcom bcm5706 is available. The patch also includes new 1000BASE-X advertisement bit definitions in mii.h Thanks to David Miller and Jeff Garzik for reviewing and their valuable feedback. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-05-26 13:03:09 -07:00


[BNX2]: Add firmware decompression Add functions to decompress firmware before loading to the internal CPUs. Compressing the firmware reduces the driver size significantly. Added file name length sanity check in the gzip header to prevent going past the end of buffer [suggested by DaveM]. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2006-06-12 22:21:25 -07:00

[BNX2]: New Broadcom gigabit network driver. A new driver bnx2 for Broadcom bcm5706 is available. The patch also includes new 1000BASE-X advertisement bit definitions in mii.h Thanks to David Miller and Jeff Garzik for reviewing and their valuable feedback. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-05-26 13:03:09 -07:00





[PATCH] net: add driver for the NIC on Cell Blades This patch adds a driver for a new 1000 Mbit ethernet NIC. It is integrated on the south bridge that is used for our Cell Blades. The code gets the MAC address from the Open Firmware device tree, so it won't compile on platforms other than ppc64. This is the first public release, so I don't expect the first version to get merged, but I'd aim for integration within the 2.6.13 time frame. Cc: Utz Bacher <utz.bacher@de.ibm.com> Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-09-05 15:19:29 -07:00

spidernet: spidernet: add support for Celleb This patch adds or changes some HW specific settings for spider_net on Celleb. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-02-20 16:36:14 -06:00
[PATCH] spidernet: select FW_LOADER The spidernet drivers uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Mackerras <paulus@samba.org> 2006-03-15 11:30:44 +01:00
[PATCH] net: add driver for the NIC on Cell Blades This patch adds a driver for a new 1000 Mbit ethernet NIC. It is integrated on the south bridge that is used for our Cell Blades. The code gets the MAC address from the Open Firmware device tree, so it won't compile on platforms other than ppc64. This is the first public release, so I don't expect the first version to get merged, but I'd aim for integration within the 2.6.13 time frame. Cc: Utz Bacher <utz.bacher@de.ibm.com> Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-09-05 15:19:29 -07:00



[PATCH] Add tsi108/9 On Chip Ethernet device driver support Add tsi108/9 on chip Ethernet controller driver support. The driver code collects the feedback of previous posting form the mailing list and gives the update. MPC7448HPC2 platform in arch/powerpc uses tsi108 bridge. The following is a brief description of the Ethernet controller: The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent Gigabit Ethernet ports,E0 and E1. It uses a single Management interface to manage the two physical connection devices (PHYs). Each Ethernet port has its own statistics monitor that tracks and reports key interface statistics. Each port supports a 256-entry hash table for address filtering. In addition, each port is bridged to the Switch Fabric through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO. Each Ethernet port also has a pair of internal Ethernet DMA channels to support the transmit and receive data flows. The Ethernet DMA channels use descriptors set up in memory, the memory map of the device, and access via the Switch Fabric. The Ethernet Controller’s DMA arbiter handles arbitration for the Switch Fabric. The Controller also has a register bus interface for register accesses and status monitor control. The PMD (Physical Media Device) interface operates in MII, GMII, or TBI modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs. The GMII and TBI modes are used to connect with Gigabit PMDs. Internal data flows to and from the Ethernet Controller through the Switch Fabric. Each Ethernet port uses its transmit and receive DMA channels to manage data flows through buffer descriptors that are predefined by the system (the descriptors can exist anywhere in the system memory map). These descriptors are data structures that point to buffers filled with data ready to transmit over Ethernet, or they point to empty buffers ready to receive data from Ethernet. Signed-off-by: Alexandre Bounine <Alexandre.Bounine@tundra.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-11-08 19:49:13 -08:00







Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00

[POWERPC] Add Vitesse 8244 PHY for MPC8641 HPCN platform. Signed-off-by: Kriston Carson <KristonCarson@freescale.com> Signed-off-by: Xianghua Xiao <x.xiao@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 2006-06-17 17:52:55 -05:00
[netdrvr gianfar] use new phy layer Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-09-23 22:54:21 -04:00
gianfar needs crc32 lib dependency Gianfar needs crc32 to be selected to compile. Signed-off-by: Dave Jiang <djiang@mvista.com> -- drivers/net/Kconfig \| 1 + 1 files changed, 1 insertions(+), 0 deletions(-) -- Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-04-12 10:57:06 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
[POWERPC] Add Vitesse 8244 PHY for MPC8641 HPCN platform. Signed-off-by: Kriston Carson <KristonCarson@freescale.com> Signed-off-by: Xianghua Xiao <x.xiao@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 2006-06-17 17:52:55 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00




[PATCH] Freescale QE UCC gigabit ethernet driver QE(QUICC Engine) is a new generation communication coprocessor, which can be found on some of the latest Freescale PowerQUICC CPUs(e.g. MPC8360). The UCC(Unified Communications Controller) module of QE can work as gigabit Ethernet device. This patch provides driver for the device. Signed-off-by: Shlomi Gridish <gridish@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-08-14 23:00:11 -07:00
























[PATCH] ucc_geth: changes to ucc_geth driver as a result of qe_lib changes and bugfixes changes due to qe_lib changes include: o removed inclusion of platform header file o removed platform_device code, replaced with of_device o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o removed irrelevant comments, added others to resemble removed BD_ defines o const'd and uncasted all get_property() assignments bugfixes, courtesy of Scott Wood, include: - Read phy_address as a u32, not u8. - Match on type == "network" as well as compatible == "ucc_geth", as device_is_compatible() will only compare up to the length of the test string, allowing "ucc_geth_phy" to match as well. - fixes the MAC setting code in ucc_geth.c. The old code was overwriting and dereferencing random stack contents. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-10-19 21:07:34 -05:00
[PATCH] Freescale QE UCC gigabit ethernet driver QE(QUICC Engine) is a new generation communication coprocessor, which can be found on some of the latest Freescale PowerQUICC CPUs(e.g. MPC8360). The UCC(Unified Communications Controller) module of QE can work as gigabit Ethernet device. This patch provides driver for the device. Signed-off-by: Shlomi Gridish <gridish@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-08-14 23:00:11 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00

[PATCH] mv643xx_eth: restrict to 32-bit PPC_MULTIPLATFORM No 64-bit PPC_MULTIPLATFORM platforms use the mv643xx_eth driver, so build it only on PPC32. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Sven Luther <sl@bplan-gmbh.de> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-09-20 12:24:34 -07:00
[PATCH] mv643xx_eth: Select CONFIG_MII on CONFIG_MV643XX_ETH >From : Dale Farnsworth <dale@farnsworth.org> Recent patches for the mv643xx_eth driver now use the MII interface library. Select MII so it gets built when that driver is selected. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-03-03 10:01:08 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00




[PATCH] qla3xxx NIC driver This is a complementary network driver for our ISP4XXX parts. There is a concurrent effort underway to get the iSCSI driver (qla4xxx) integrated upstream as well. I have been through several iterations with the linux-netdev list and have had much response from Stephen Hemminger. - Built and tested using kernel 2.6.17-rc4. - The chip supports two ethernet and two iSCSI functions. - The functions ql_sem_lock, ql_sem_spinlock, ql_sem_unlock, and ql_wait_for_drvr_lock are used to protect resources that are shared across the network and iSCSI functions. This protection is mostly during chip initialization and resets, but also include link management. - The PHY/MII are not exported through ethtool due to the fact that the iSCSI function will control the common link at least 50% of the time. This driver has been through several iterations on the netdev list and we feel this driver is ready for inclusion in the upstream kernel. It has been built and tested on x86 and PPC64 platforms. Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-07-25 00:40:21 -07:00








Add Attansic L1 ethernet driver. This driver is a modified version of the Attansic reference driver for the L1 ethernet adapter. Attansic has granted permission for its inclusion in the mainline kernel. Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-02-08 10:42:37 -05:00

atl1: drop NET_PCI from Kconfig The atl1 driver doesn't need NET_PCI. Remove it from Kconfig. Noticed by Chad Sprouse. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-02-14 20:12:13 -06:00
Add Attansic L1 ethernet driver. This driver is a modified version of the Attansic reference driver for the L1 ethernet adapter. Attansic has granted permission for its inclusion in the mainline kernel. Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-02-08 10:42:37 -05:00







Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00






[NET]: Improve presentation of networking driver families. Suggestion from Sam Ravnborg <sam@ravnborg.org> It causes all driver families to be displayed aligned immediately under the main network drivers heading (in menuconfig/xconfig/gconfig) instead of not being subordinate to (i.e., not indented) the Network device support heading at all. The improved network driver families are: token ring, wireless, PCMCIA, WAN, ATM, and S390. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-27 13:04:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler / +static int pm3393_interrupt_handler(struct cmac cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt 2005-03-30 13:34:31 -08:00


[PATCH] chelsio: use standard CRC routines Replace driver crc calculation with existing library. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-12-01 16:36:19 -08:00
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler / +static int pm3393_interrupt_handler(struct cmac cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt 2005-03-30 13:34:31 -08:00
[PATCH] chelsio: add support for other 10G boards Add support for other versions of the 10G Chelsio boards. This is basically a port of the vendor driver with the TOE features removed. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-12-01 16:36:16 -08:00


[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler / +static int pm3393_interrupt_handler(struct cmac cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt 2005-03-30 13:34:31 -08:00











[PATCH] chelsio: add 1G swcixw aupport Add support for 1G versions of Chelsio devices. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-12-01 16:36:17 -08:00






[PATCH] chelsio: working NAPI This driver tries to enable/disable NAPI at runtime, but does so in an unsafe manner, and the NAPI interrupt handling is a mess. Replace it with a compile time selected NAPI implementation. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-12-08 11:08:33 -08:00







Add support for the latest 1G/10G Chelsio adapter, T3. This driver is required by the Chelsio T3 RDMA driver posted by Steve Wise. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-01-18 22:04:14 -05:00
cxgb3 - fix white spaces in drivers/net/Kconfig Use tabs instead of white spaces for CHELSIO_T3 entry. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-03-21 19:21:00 -07:00

cxgb3 - Auto-load FW if mismatch detected The driver attempts to upgrade the FW if the card has the wrong version. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-03-18 13:10:06 -07:00
cxgb3 - fix white spaces in drivers/net/Kconfig Use tabs instead of white spaces for CHELSIO_T3 entry. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-03-21 19:21:00 -07:00


Add support for the latest 1G/10G Chelsio adapter, T3. This driver is required by the Chelsio T3 RDMA driver posted by Steve Wise. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-01-18 22:04:14 -05:00
cxgb3 - fix white spaces in drivers/net/Kconfig Use tabs instead of white spaces for CHELSIO_T3 entry. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-03-21 19:21:00 -07:00

Add support for the latest 1G/10G Chelsio adapter, T3. This driver is required by the Chelsio T3 RDMA driver posted by Steve Wise. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-01-18 22:04:14 -05:00
cxgb3 - fix white spaces in drivers/net/Kconfig Use tabs instead of white spaces for CHELSIO_T3 entry. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-03-21 19:21:00 -07:00

Add support for the latest 1G/10G Chelsio adapter, T3. This driver is required by the Chelsio T3 RDMA driver posted by Steve Wise. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-01-18 22:04:14 -05:00
cxgb3 - fix white spaces in drivers/net/Kconfig Use tabs instead of white spaces for CHELSIO_T3 entry. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-03-21 19:21:00 -07:00
Add support for the latest 1G/10G Chelsio adapter, T3. This driver is required by the Chelsio T3 RDMA driver posted by Steve Wise. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-01-18 22:04:14 -05:00
cxgb3 - fix white spaces in drivers/net/Kconfig Use tabs instead of white spaces for CHELSIO_T3 entry. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-03-21 19:21:00 -07:00

Add support for the latest 1G/10G Chelsio adapter, T3. This driver is required by the Chelsio T3 RDMA driver posted by Steve Wise. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-01-18 22:04:14 -05:00
[PATCH] ehea: IBM eHEA Ethernet Device Driver Hi Jeff, I fixed the __iomem issue and tested the driver with sparse. Looks good so far. Thanks for your effort. Jan-Bernd Themann Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> drivers/net/Kconfig \| 9 drivers/net/Makefile \| 1 drivers/net/ehea/Makefile \| 6 drivers/net/ehea/ehea.h \| 447 ++++++ drivers/net/ehea/ehea_ethtool.c \| 294 ++++ drivers/net/ehea/ehea_hcall.h \| 51 drivers/net/ehea/ehea_hw.h \| 287 ++++ drivers/net/ehea/ehea_main.c \| 2654 ++++++++++++++++++++++++++++++++++++++++ drivers/net/ehea/ehea_phyp.c \| 705 ++++++++++ drivers/net/ehea/ehea_phyp.h \| 455 ++++++ drivers/net/ehea/ehea_qmr.c \| 582 ++++++++ drivers/net/ehea/ehea_qmr.h \| 358 +++++ 12 files changed, 5849 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-09-13 17:44:31 +02:00








Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00











































[PATCH] s2io: kconfig help fix The documentation about s2io is available at Documentation/networking/s2io.txt. Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-10-21 19:06:42 +09:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00

















[PATCH] Add Myri-10G Ethernet driver Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew J. Gallatin <gallatin@myri.com> drivers/net/Kconfig \| 17 drivers/net/Makefile \| 1 drivers/net/myri10ge/Makefile \| 5 drivers/net/myri10ge/myri10ge.c \| 2851 +++++++++++++++ drivers/net/myri10ge/myri10ge_mcp.h \| 205 + drivers/net/myri10ge/myri10ge_mcp_gen_header.h \| 58 include/linux/pci_ids.h \| 1 7 files changed, 3138 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-05-23 06:10:15 -04:00










[PATCH] myri10ge: update the firmware download URL in Kconfig Update the firmware download URL in Kconfig to match the header in drivers/net/myri10ge/myri10ge.c. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-09-05 21:58:50 -04:00
[PATCH] Add Myri-10G Ethernet driver Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew J. Gallatin <gallatin@myri.com> drivers/net/Kconfig \| 17 drivers/net/Makefile \| 1 drivers/net/myri10ge/Makefile \| 5 drivers/net/myri10ge/myri10ge.c \| 2851 +++++++++++++++ drivers/net/myri10ge/myri10ge_mcp.h \| 205 + drivers/net/myri10ge/myri10ge_mcp_gen_header.h \| 58 include/linux/pci_ids.h \| 1 7 files changed, 3138 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-05-23 06:10:15 -04:00




Add NetXen 1G/10G ethernet driver. Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-10-21 15:33:03 -04:00

[PATCH] netxen: uses PCI drivers/built-in.o: In function `netxen_nic_remove': netxen_nic_main.c:(.text+0x31b4d): undefined reference to `pci_disable_msi' netxen_nic_main.c:(.text+0x31b8e): undefined reference to `pci_release_regions' drivers/built-in.o: In function `netxen_init_module': netxen_nic_main.c:(.init.text+0x3f17): undefined reference to `pci_module_init' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-11-16 21:39:11 -08:00
Add NetXen 1G/10G ethernet driver. Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-10-21 15:33:03 -04:00


PA Semi PWRficient Ethernet driver Driver for the PA Semi PWRficient on-chip Ethernet (1/10G) Basic enablement, will be complemented with performance enhancements over time. PHY support will be added as well. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2007-01-31 21:43:54 -06:00






Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00















[NET]: Improve presentation of networking driver families. Suggestion from Sam Ravnborg <sam@ravnborg.org> It causes all driver families to be displayed aligned immediately under the main network drivers heading (in menuconfig/xconfig/gconfig) instead of not being subordinate to (i.e., not indented) the Network device support heading at all. The improved network driver families are: token ring, wireless, PCMCIA, WAN, ATM, and S390. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-27 13:04:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00
[PATCH] Add rapidio net driver Adds an "Ethernet" driver which sends Ethernet packets over the standard RapidIO messaging. This depends on the core RIO patch for mailbox/doorbell access. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-09-09 12:10:10 -07:00

[PATCH] Kconfig: remove redundant NETDEVICES depends drivers/net/Kconfig says: # All the following symbols are dependent on NETDEVICES - do not repeat # that for each of the symbols. so remove duplicate 'depends' uses of NETDEVICES. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-11-01 21:18:58 -08:00
[PATCH] Add rapidio net driver Adds an "Ethernet" driver which sends Ethernet packets over the standard RapidIO messaging. This depends on the core RIO patch for mailbox/doorbell access. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> 2005-09-09 12:10:10 -07:00










Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00

[TC] defxx: TURBOchannel support This is a set of changes to add TURBOchannel support to the defxx driver. As at this point the EISA support in the driver has become the only not having been converted to the driver model, I took the opportunity to convert it as well. Plus support for MMIO in addition to PIO operation as TURBOchannel requires it anyway. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2007-02-05 16:28:27 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00








[TC] defxx: TURBOchannel support This is a set of changes to add TURBOchannel support to the defxx driver. As at this point the EISA support in the driver has become the only not having been converted to the driver model, I took the opportunity to convert it as well. Plus support for MMIO in addition to PIO operation as TURBOchannel requires it anyway. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2007-02-05 16:28:27 -08:00
























Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00



net: use bitrev8 Use bitrev8 for bmac, mace, macmace, macsonic, and skfp drivers. [akpm@osdl.org: use the API, not the array] Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mirko Lindner <mlindner@syskonnect.de> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-12-19 13:09:08 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00





























[NET]: Improve presentation of networking driver families. Suggestion from Sam Ravnborg <sam@ravnborg.org> It causes all driver families to be displayed aligned immediately under the main network drivers heading (in menuconfig/xconfig/gconfig) instead of not being subordinate to (i.e., not indented) the Network device support heading at all. The improved network driver families are: token ring, wireless, PCMCIA, WAN, ATM, and S390. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-27 13:04:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00






























[NET]: Improve presentation of networking driver families. Suggestion from Sam Ravnborg <sam@ravnborg.org> It causes all driver families to be displayed aligned immediately under the main network drivers heading (in menuconfig/xconfig/gconfig) instead of not being subordinate to (i.e., not indented) the Network device support heading at all. The improved network driver families are: token ring, wireless, PCMCIA, WAN, ATM, and S390. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-27 13:04:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00


































[PATCH] Cleanup SLHC configuration Convert selection of serial line header compression to use CONFIG_SLHC rather than makefile ifeq uglyness. This makes it easier to select the SLHC module from other code. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-07-14 12:15:40 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00















































[PATCH] trivial: fix spelling errors in Kconfigs This patch corrects a few spelling and grammar errors found in drivers/net Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 2006-02-12 11:53:04 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00






























































[PPP]: add PPP MPPE encryption module From: Matt Domsch <Matt_Domsch@dell.com> The patch below implements the Microsoft Point-to-Point Encryption method as a PPP compressor/decompressor. This is necessary for Linux clients and servers to interoperate with Microsoft Point-to-Point Tunneling Protocol (PPTP) servers (either Microsoft PPTP servers or the poptop project) which use MPPE to encrypt data when creating a VPN. This patch differs from the kernel_ppp_mppe DKMS pacakge at pptpclient.sourceforge.net by utilizing the kernel crypto routines rather than providing its own SHA1 and arcfour implementations. Minor changes to ppp_generic.c try to prevent a link from disabling compression (in our case, the encryption) after it has started using compression (encryption). Feedback to <pptpclient-devel@lists.sourceforge.net> please. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Cc: James Cameron <james.cameron@hp.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-11-08 09:40:47 -08:00





[CRYPTO] users: Select ECB/CBC where needed CRYPTO_MANAGER is selected automatically by CONFIG_ECB and CONFIG_CBC. config CRYPTO_ECB tristate "ECB support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER I've added CONFIG_ECB to the ones you mentioned and CONFIG_CBC to gssapi. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2006-10-25 16:49:36 +10:00
[PPP]: add PPP MPPE encryption module From: Matt Domsch <Matt_Domsch@dell.com> The patch below implements the Microsoft Point-to-Point Encryption method as a PPP compressor/decompressor. This is necessary for Linux clients and servers to interoperate with Microsoft Point-to-Point Tunneling Protocol (PPTP) servers (either Microsoft PPTP servers or the poptop project) which use MPPE to encrypt data when creating a VPN. This patch differs from the kernel_ppp_mppe DKMS pacakge at pptpclient.sourceforge.net by utilizing the kernel crypto routines rather than providing its own SHA1 and arcfour implementations. Minor changes to ppp_generic.c try to prevent a link from disabling compression (in our case, the encryption) after it has started using compression (encryption). Feedback to <pptpclient-devel@lists.sourceforge.net> please. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Cc: James Cameron <james.cameron@hp.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-11-08 09:40:47 -08:00






Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00






















































[PATCH] Cleanup SLHC configuration Convert selection of serial line header compression to use CONFIG_SLHC rather than makefile ifeq uglyness. This makes it easier to select the SLHC module from other code. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-07-14 12:15:40 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00











[PATCH] Cleanup SLHC configuration Convert selection of serial line header compression to use CONFIG_SLHC rather than makefile ifeq uglyness. This makes it easier to select the SLHC module from other code. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 2006-07-14 12:15:40 +01:00





Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00





















[NET]: Improve presentation of networking driver families. Suggestion from Sam Ravnborg <sam@ravnborg.org> It causes all driver families to be displayed aligned immediately under the main network drivers heading (in menuconfig/xconfig/gconfig) instead of not being subordinate to (i.e., not indented) the Network device support heading at all. The improved network driver families are: token ring, wireless, PCMCIA, WAN, ATM, and S390. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-27 13:04:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00










[NET]: kconfig, correct traffic shaper As Patrick McHardy <kaber@trash.net> suggested, Traffic Shaper is now obsolete and alternative to it is no longer CBQ, since its problems with virtual devices, alter Kconfig text to reflect this -- put a link to the traffic schedulers as a whole. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2006-11-06 14:34:48 -08:00
[NET]: Improve presentation of networking driver families. Suggestion from Sam Ravnborg <sam@ravnborg.org> It causes all driver families to be displayed aligned immediately under the main network drivers heading (in menuconfig/xconfig/gconfig) instead of not being subordinate to (i.e., not indented) the Network device support heading at all. The improved network driver families are: token ring, wireless, PCMCIA, WAN, ATM, and S390. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-27 13:04:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00






[NET]: kconfig, correct traffic shaper As Patrick McHardy <kaber@trash.net> suggested, Traffic Shaper is now obsolete and alternative to it is no longer CBQ, since its problems with virtual devices, alter Kconfig text to reflect this -- put a link to the traffic schedulers as a whole. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2006-11-06 14:34:48 -08:00


Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00





[NET]: Move in_aton from net/ipv4/utils.c to net/core/utils.c Move in_aton to allow netpoll and pktgen to work without the rest of the IPv4 stack. Fix whitespace and add comment for the odd placement. Delete now-empty net/ipv4/utils.c Re-enable netpoll/netconsole without CONFIG_INET Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-27 15:24:42 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 15:20:36 -07:00



[NETDEV] config: revert part of previous patch Net devices should depend on NETDEVICES, so revert part of Paolo's previous patch. See http://marc.theaimsgroup.com/?l=linux-kernel&m=115566326218740&w=2 for history. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2006-09-25 23:11:21 -07:00

[NET]: Kconfig: NETCONSOLE and NETPOLL together Put NETCONSOLE and NETPOLL options together since they are related. This cuts down on the hassle of flipping back and forth between the Networking menu and the Network drivers menu to change their config settings. Tested with menuconfig, gconfig, and xconfig. gconfig has a small problem with this. I think that it's a bug in gconfig and I will take it up with Romain Lievin. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-18 13:45:12 -07:00















[NET]: add a top-level Networking menu to config Create a new top-level menu named "Networking" thus moving net related options and protocol selection way from the drivers menu and up on the top-level where they belong. To implement this all architectures has to source "net/Kconfig" before drivers//Kconfig in their Kconfig file. This change has been implemented for all architectures. Device drivers for ordinary NIC's are still to be found in the Device Drivers section, but Bluetooth, IrDA and ax25 are located with their corresponding menu entries under the new networking menu item. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2005-07-11 21:03:49 -07:00

2945 lines 101 KiB Raw Permalink Normal View History

2945 lines

101 KiB

Raw Permalink Normal View History