kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-09 18:15:49 +00:00
Code Issues Releases Packages Activity
linux/arch/arm/Kconfig.debug

1153 lines
37 KiB
Raw Permalink Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via /dev/mem There are very few legitimate use cases, if any, for directly accessing system RAM through /dev/mem. So let's mimic what they do on x86 and forbid it when CONFIG_STRICT_DEVMEM is turned on. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2010-09-22 18:34:36 -04:00
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 13:56:34 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Thumb-2: Add Thumb-2 support to the build files This patch adds the necessary entries to the Makefile and Kconfig files for building the Thumb-2 kernel. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:33:02 +01:00
ARM: ftrace: enable function graph tracer Add the options to enable the function graph tracer on ARM. Function graph tracer support requires frame pointers, so exclude Thumb-2 and also make sure FRAME_POINTER gets enabled when FUNCTION_GRAPH_TRACER is used, since FUNCTION_TRACER doesn't "select FRAME_POINTER" when ARM_UNWIND is used. Therefore, with GCC 4.4.0+, you get plain function tracing without frame pointers, but you'll need them if you want function graph tracing. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Rabin Vincent <rabin@rab.in>
2010-11-06 23:03:53 +05:30
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 13:56:34 +01:00
ARM: Ensure experimental options are so marked It is kernel-wide policy that options depending on EXPERIMENTAL should also have '(EXPERIMENTAL)' in their option text, and options with '(EXPERIMENTAL)' depend on EXPERIMENTAL. Ensure that all ARM options comply with this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-05 23:06:22 +00:00
arch/arm: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16 18:53:14 -08:00
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 13:56:34 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ARM: 6314/1: ftrace: allow build without frame pointers on ARM With a new enough GCC, ARM function tracing can be supported without the need for frame pointers. This is essential for Thumb-2 support, since frame pointers aren't available then. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10 19:32:37 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ARM: 7073/1: debug: augment DEBUG_LL Kconfig help to clarify behaviour Enabled DEBUG_LL hardcodes the UART address into the kernel and results in a non-portable kernel image. Since this option is only intended for use when debugging early boot failures, supporting multiple platforms in such a configuration is not the intended use-case. This patch documents this limitation in the DEBUG_LL Kconfig help text, so that users are aware of the portability restrictions that are associated with enabling low-level debugging support. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-01 19:04:44 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] Fix typo in arch/arm/Kconfig.debug It's called printch, not printchar Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-09 15:57:17 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ARM: 7073/1: debug: augment DEBUG_LL Kconfig help to clarify behaviour Enabled DEBUG_LL hardcodes the UART address into the kernel and results in a non-portable kernel image. Since this option is only intended for use when debugging early boot failures, supporting multiple platforms in such a configuration is not the intended use-case. This patch documents this limitation in the DEBUG_LL Kconfig help text, so that users are aware of the portability restrictions that are associated with enabling low-level debugging support. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-01 19:04:44 +01:00
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-01 18:58:51 +01:00
ARM: at91: make DBGU soc independent we will select now the DBGU used by the soc at Kconfig level For the DEBUG_LL and early_printk this will allow to select which DBGU to use this will also allow to select them when multiple SOC are enabled Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-02 01:43:31 +08:00
ARM: at91: code removal of CAP9 SoC Following removal announce and addition to feature-removal-schedule.txt, here is the actual source code deletion for Atmel CAP9 family. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-01-26 14:07:09 +01:00
ARM: at91: make DBGU soc independent we will select now the DBGU used by the soc at Kconfig level For the DEBUG_LL and early_printk this will allow to select which DBGU to use this will also allow to select them when multiple SOC are enabled Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-02 01:43:31 +08:00
ARM: bcm2835: convert to multi-platform This allows BCM2835 be included in a kernel build that supports multiple SoCs at once, which is useful for distro kernels. This change: * Moves bcm2835's debug-macro.S into ARM's include/debug/, and hooks it into the relevant menu. * Moves bcm2835's Kconfig into its own directory, as seems typical for multi-platform conversions. * Removes bcm2835_soc.h, and moves the content to the files where it was used; just one usage per define. * Deletes some headers and Makefile.boot that aren't needed now that we support multi-platform. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-03-11 22:40:18 -06:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: bcm2835: convert to multi-platform This allows BCM2835 be included in a kernel build that supports multiple SoCs at once, which is useful for distro kernels. This change: * Moves bcm2835's debug-macro.S into ARM's include/debug/, and hooks it into the relevant menu. * Moves bcm2835's Kconfig into its own directory, as seems typical for multi-platform conversions. * Removes bcm2835_soc.h, and moves the content to the files where it was used; just one usage per define. * Deletes some headers and Makefile.boot that aren't needed now that we support multi-platform. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-03-11 22:40:18 -06:00
ARM: 7096/1: debug: Add UART1 config choices ARM patch 7072/1 (debug: use kconfig choice for selecting DEBUG_LL UART) didn't notice that the Kconfigs relied on being unselected to configure a different serial port. Since there is no NONE option in a choice menu, explicitly add the other option so that both serial ports can be selected. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-22 20:28:35 +01:00
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-01 18:58:51 +01:00
ARM: cns3xxx: move debug_ll code to include/debug/ This is needed in order to keep debug_ll functionality on cns3xxx working when we enable ARCH_MULTIPLATFORM. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-14 16:02:59 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: cns3xxx: move debug_ll code to include/debug/ This is needed in order to keep debug_ll functionality on cns3xxx working when we enable ARCH_MULTIPLATFORM. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-14 16:02:59 +01:00
ARM: davinci: implement DEBUG_LL port choice Apart from the necessity to do this change for multi-platform kernels the previous logic depended on the zImage decompressor to write the physical and virtual address to a magic memory location. If the decompressor is unused or not correctly configured for the current machid, the addruart macro was an infinite loop. Moreover debugging the early zImage code was not possible either. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch error. Fix debug port choice config dependency for traditional DaVincis. Modify debug port config names and add help text.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-03-22 10:29:23 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: davinci: implement DEBUG_LL port choice Apart from the necessity to do this change for multi-platform kernels the previous logic depended on the zImage decompressor to write the physical and virtual address to a magic memory location. If the decompressor is unused or not correctly configured for the current machid, the addruart macro was an infinite loop. Moreover debugging the early zImage code was not possible either. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch error. Fix debug port choice config dependency for traditional DaVincis. Modify debug port config names and add help text.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-03-22 10:29:23 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: davinci: implement DEBUG_LL port choice Apart from the necessity to do this change for multi-platform kernels the previous logic depended on the zImage decompressor to write the physical and virtual address to a magic memory location. If the decompressor is unused or not correctly configured for the current machid, the addruart macro was an infinite loop. Moreover debugging the early zImage code was not possible either. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch error. Fix debug port choice config dependency for traditional DaVincis. Modify debug port config names and add help text.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-03-22 10:29:23 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: davinci: implement DEBUG_LL port choice Apart from the necessity to do this change for multi-platform kernels the previous logic depended on the zImage decompressor to write the physical and virtual address to a magic memory location. If the decompressor is unused or not correctly configured for the current machid, the addruart macro was an infinite loop. Moreover debugging the early zImage code was not possible either. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch error. Fix debug port choice config dependency for traditional DaVincis. Modify debug port config names and add help text.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-03-22 10:29:23 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: davinci: implement DEBUG_LL port choice Apart from the necessity to do this change for multi-platform kernels the previous logic depended on the zImage decompressor to write the physical and virtual address to a magic memory location. If the decompressor is unused or not correctly configured for the current machid, the addruart macro was an infinite loop. Moreover debugging the early zImage code was not possible either. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch error. Fix debug port choice config dependency for traditional DaVincis. Modify debug port config names and add help text.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-03-22 10:29:23 +01:00
ARM: zynq: Allow UART1 to be used as DEBUG_LL console. The main UART on the Xilinx ZC702 board is UART1, located at address e0001000. Add a Kconfig option to select this device as the low-level debugging port. This allows the really early boot printouts to reach the USB serial adaptor on this board. For consistency's sake, add a choice entry for UART0 even though it is the the default if UART1 is not selected. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-05 16:45:49 -05:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: 7826/1: debug: support debug ll on hisilicon soc Support UART0 debug ll on Hisilicon Hi3620 SoC & Hi3716 SoC. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-24 06:58:39 +01:00
ARM: add Highbank core platform support This adds basic support for the Calxeda Highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-06-07 10:02:55 -05:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: add Highbank core platform support This adds basic support for the Calxeda Highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-06-07 10:02:55 -05:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: imx: use separated debug uart symbol for imx31 and imx35 It's improper to use combined symbol DEBUG_IMX31_IMX35_UART for imx31 and imx35, because imx31 has 5 UARTs while imx35 only has 3. So later when we add UART port selection for DEBUG_IMX31_IMX35_UART, we will have problem. Use separated Kconfig options for imx31 and imx35 debug uart selection. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 18:54:01 +08:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: imx: use separated debug uart symbol for imx31 and imx35 It's improper to use combined symbol DEBUG_IMX31_IMX35_UART for imx31 and imx35, because imx31 has 5 UARTs while imx35 only has 3. So later when we add UART port selection for DEBUG_IMX31_IMX35_UART, we will have problem. Use separated Kconfig options for imx31 and imx35 debug uart selection. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 18:54:01 +08:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: imx: Remove mx508 support Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN for several releases. mx508 currently lacks clock support. In case someone needs to add mx508 support back, then the recommended approach is to use device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-22 10:40:55 -02:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: imx: Remove mx508 support Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN for several releases. mx508 currently lacks clock support. In case someone needs to add mx508 support back, then the recommended approach is to use device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-22 10:40:55 -02:00
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 05:56:59 +01:00
ARM: imx6q: let users input debug uart port number imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 13:44:29 +08:00
ARM: imx: add initial imx6dl support The i.MX6 DualLite/Solo is another i.MX6 family SoC, which is highly compatible with i.MX6 Quad/Dual. And that's why we choose to support it using imx6q code with cpu_is_imx6dl() check when necessary. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 22:13:32 +08:00
ARM: imx6: Add UART2 for low-level debug To be able to enable early debugging on boards using the UART2 for the console, add the option for early debugging on UART2. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-04-27 10:15:45 +02:00
ARM: imx: add initial imx6dl support The i.MX6 DualLite/Solo is another i.MX6 family SoC, which is highly compatible with i.MX6 Quad/Dual. And that's why we choose to support it using imx6q code with cpu_is_imx6dl() check when necessary. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 22:13:32 +08:00
arm/imx6q: add core definitions and low-level debug uart It adds the core definitions and low-level debug uart support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-02 15:09:11 +08:00
ARM: imx: enable low-level debug support for imx6sl Enable low-level debug support for i.MX6 SoloLite by adding the debug port definitions for the SoC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-03 11:21:03 +08:00
ARM: keystone: Add minimal TI Keystone platform support Texas Instruments Keystone family of multi-core devices are based on ARM Cortex A15. Patch adds basic definitions for a new Keystone sub-architecture in ARM. The TCI66xxK2H Communications Infrastructure Keystone SoCs are member of the C66x family based on TI's new KeyStone 2 multi-core SoC Architecture designed specifically for high performance wireless and networking infrastructure applications. The SOCs contains many subsystems like Cortex A15 ARM CorePacs, C66XX DSP CorePacs, MSMC memory controller, Tera Net bus, IP Network, Navigator, Hyperlink, 1G/10G Ethernet, Radio layers and queue based communication systems. Cc: Arnd Bergmann <arnd@arndb.de> Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-06-10 11:27:13 -04:00
ARM: debug: move keystone debug to generic 8250 code Keystone's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:05:49 +01:00
ARM: keystone: Add minimal TI Keystone platform support Texas Instruments Keystone family of multi-core devices are based on ARM Cortex A15. Patch adds basic definitions for a new Keystone sub-architecture in ARM. The TCI66xxK2H Communications Infrastructure Keystone SoCs are member of the C66x family based on TI's new KeyStone 2 multi-core SoC Architecture designed specifically for high performance wireless and networking infrastructure applications. The SOCs contains many subsystems like Cortex A15 ARM CorePacs, C66XX DSP CorePacs, MSMC memory controller, Tera Net bus, IP Network, Navigator, Hyperlink, 1G/10G Ethernet, Radio layers and queue based communication systems. Cc: Arnd Bergmann <arnd@arndb.de> Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-06-10 11:27:13 -04:00
ARM: debug: move keystone debug to generic 8250 code Keystone's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:05:49 +01:00
ARM: keystone: Add minimal TI Keystone platform support Texas Instruments Keystone family of multi-core devices are based on ARM Cortex A15. Patch adds basic definitions for a new Keystone sub-architecture in ARM. The TCI66xxK2H Communications Infrastructure Keystone SoCs are member of the C66x family based on TI's new KeyStone 2 multi-core SoC Architecture designed specifically for high performance wireless and networking infrastructure applications. The SOCs contains many subsystems like Cortex A15 ARM CorePacs, C66XX DSP CorePacs, MSMC memory controller, Tera Net bus, IP Network, Navigator, Hyperlink, 1G/10G Ethernet, Radio layers and queue based communication systems. Cc: Arnd Bergmann <arnd@arndb.de> Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-06-10 11:27:13 -04:00
ARM: mmp: implement DEBUG_LL port choice DEBUG_LL port must be choiced in arch-mmp. DEBUG_LL port should be UART2 in TTC DKB. And it should be UART3 in brownstone. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-08-10 23:49:41 +08:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: mmp: implement DEBUG_LL port choice DEBUG_LL port must be choiced in arch-mmp. DEBUG_LL port should be UART2 in TTC DKB. And it should be UART3 in brownstone. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-08-10 23:49:41 +08:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: mmp: implement DEBUG_LL port choice DEBUG_LL port must be choiced in arch-mmp. DEBUG_LL port should be UART2 in TTC DKB. And it should be UART3 in brownstone. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-08-10 23:49:41 +08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: 7859/1: debug: Create CONFIG_DEBUG_MSM_UART and re-organize the selects for MSM Create the hidden config DEBUG_MSM_UART and clean-up the default selection for CONFIG_DEBUG_LL_INCLUDE. Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-17 22:07:27 +01:00
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:28:54 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:28:54 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: 7859/1: debug: Create CONFIG_DEBUG_MSM_UART and re-organize the selects for MSM Create the hidden config DEBUG_MSM_UART and clean-up the default selection for CONFIG_DEBUG_LL_INCLUDE. Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-17 22:07:27 +01:00
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:28:54 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:28:54 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: 7859/1: debug: Create CONFIG_DEBUG_MSM_UART and re-organize the selects for MSM Create the hidden config DEBUG_MSM_UART and clean-up the default selection for CONFIG_DEBUG_LL_INCLUDE. Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-17 22:07:27 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:28:54 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: 7859/1: debug: Create CONFIG_DEBUG_MSM_UART and re-organize the selects for MSM Create the hidden config DEBUG_MSM_UART and clean-up the default selection for CONFIG_DEBUG_LL_INCLUDE. Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-17 22:07:27 +01:00
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:28:54 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:28:54 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: 7859/1: debug: Create CONFIG_DEBUG_MSM_UART and re-organize the selects for MSM Create the hidden config DEBUG_MSM_UART and clean-up the default selection for CONFIG_DEBUG_LL_INCLUDE. Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-17 22:07:27 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:28:54 +01:00
ARM: 7860/1: debug: msm: Add DEBUG_LL support for ARCH_MSM8974 Add debug uart support for MSM8974. This patch adds a Kconfig entry and the base address for the debug uart. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-17 22:15:35 +01:00
ARM: mvebu: move debug macros to include/debug Move mvebu debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch>
2012-09-02 14:41:34 -05:00
arm: mvebu: add another earlyprintk Kconfig option In order to support both old and new bootloaders, we add a new Kconfig option for the earlyprintk UART selection. The existing option allows to work with old bootloaders (that keep the internal registers mapped at 0xd0000000), while the newly introduced option allows to work with new bootloaders (that remap the internal registers at 0xf1000000). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-05 09:05:00 +02:00
ARM: mvebu: move debug macros to include/debug Move mvebu debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch>
2012-09-02 14:41:34 -05:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: mvebu: move debug macros to include/debug Move mvebu debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch>
2012-09-02 14:41:34 -05:00
arm: mvebu: add another earlyprintk Kconfig option In order to support both old and new bootloaders, we add a new Kconfig option for the earlyprintk UART selection. The existing option allows to work with old bootloaders (that keep the internal registers mapped at 0xd0000000), while the newly introduced option allows to work with new bootloaders (that remap the internal registers at 0xf1000000). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-05 09:05:00 +02:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
arm: mvebu: add another earlyprintk Kconfig option In order to support both old and new bootloaders, we add a new Kconfig option for the earlyprintk UART selection. The existing option allows to work with old bootloaders (that keep the internal registers mapped at 0xd0000000), while the newly introduced option allows to work with new bootloaders (that remap the internal registers at 0xf1000000). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-05 09:05:00 +02:00
ARM: imx: add low-level debug for vybrid Add low-level debug support for vybrid, so that earlyprintk can be enabled for debugging early boot issue. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-12 17:22:17 +08:00
ARM: nomadik: move debugmacro to debug includes This moves the Nomadik debug macro to the debug headers to make way for multiplatform support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-27 22:39:57 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: nomadik: move debugmacro to debug includes This moves the Nomadik debug macro to the debug headers to make way for multiplatform support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-27 22:39:57 +01:00
arm: Add Initial TI-Nspire support This patch adds support for the TI-Nspire platform. Changes between v1 and v2: * Added GENERIC_IRQ_CHIP to platform Kconfig Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-11 18:40:17 +10:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
arm: Add Initial TI-Nspire support This patch adds support for the TI-Nspire platform. Changes between v1 and v2: * Added GENERIC_IRQ_CHIP to platform Kconfig Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-11 18:40:17 +10:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
arm: Add Initial TI-Nspire support This patch adds support for the TI-Nspire platform. Changes between v1 and v2: * Added GENERIC_IRQ_CHIP to platform Kconfig Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-11 18:40:17 +10:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: OMAP2+: Add multiplatform debug_ll support Add multiplatform debug_ll support by stripping away the custom hacks to detect the port from debug-macro.S. Note that this now requires the specific debug_ll port to be selected in the .config. The old debug-macro.S will be removed a bit later once we are sure things work properly with multiplatform enabled. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11 11:24:19 -08:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: OMAP2+: Add multiplatform debug_ll support Add multiplatform debug_ll support by stripping away the custom hacks to detect the port from debug-macro.S. Note that this now requires the specific debug_ll port to be selected in the .config. The old debug-macro.S will be removed a bit later once we are sure things work properly with multiplatform enabled. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11 11:24:19 -08:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: OMAP2+: Add multiplatform debug_ll support Add multiplatform debug_ll support by stripping away the custom hacks to detect the port from debug-macro.S. Note that this now requires the specific debug_ll port to be selected in the .config. The old debug-macro.S will be removed a bit later once we are sure things work properly with multiplatform enabled. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11 11:24:19 -08:00
ARM: picoxcell: move debug macros to include/debug Move picoxcell debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jamie Iles <jamie@jamieiles.com>
2012-09-06 14:14:46 -05:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: picoxcell: move debug macros to include/debug Move picoxcell debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jamie Iles <jamie@jamieiles.com>
2012-09-06 14:14:46 -05:00
ARM: pxa: move debug uart code Move debug uart code from mach-pxa/mach-mmp to debug directory. Since they are similar, merge them together. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Eric Mico <eric.y.miao@gmail.com>
2013-04-10 11:17:04 +08:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: pxa: move debug uart code Move debug uart code from mach-pxa/mach-mmp to debug directory. Since they are similar, merge them together. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Eric Mico <eric.y.miao@gmail.com>
2013-04-10 11:17:04 +08:00
ARM: realview: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:30:28 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: realview: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:30:28 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: realview: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-16 22:30:28 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
arm: add debug uarts for rockchip rk29xx and rk3xxx series Uarts on all recent Rockchip SoCs are Synopsis DesignWare 8250 types. Only their addresses vary very much. This patch adds the necessary definitions to use any of the uart ports for early debug purposes. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2013-05-28 22:13:52 +02:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
arm: add debug uarts for rockchip rk29xx and rk3xxx series Uarts on all recent Rockchip SoCs are Synopsis DesignWare 8250 types. Only their addresses vary very much. This patch adds the necessary definitions to use any of the uart ports for early debug purposes. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2013-05-28 22:13:52 +02:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-04 18:03:10 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-04 18:03:10 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-04 18:03:10 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: EXYNOS: add UART3 to DEBUG_LL ports Add support for using UART3 for DEBUG_LL on exynos. [dianders: added depend on ARCH_EXYNOS.] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 14:24:04 +09:00
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-04 18:03:10 +01:00
ARM: EXYNOS: add UART3 to DEBUG_LL ports Add support for using UART3 for DEBUG_LL on exynos. [dianders: added depend on ARCH_EXYNOS.] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 14:24:04 +09:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: socfpga: move debug macros to include/debug Move socfpga debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Dinh Nguyen <dinguyen@altera.com>
2012-09-06 14:11:28 -05:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: socfpga: move debug macros to include/debug Move socfpga debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Dinh Nguyen <dinguyen@altera.com>
2012-09-06 14:11:28 -05:00
ARM: sunxi: Add earlyprintk support for UART0 (sun4i) Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-19 12:09:41 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: sunxi: Add earlyprintk support for UART0 (sun4i) Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-19 12:09:41 +01:00
ARM: sunxi: Add earlyprintk support Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Stefan Roese <sr@denx.de>
2012-11-08 12:40:49 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: sunxi: Add earlyprintk support Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Stefan Roese <sr@denx.de>
2012-11-08 12:40:49 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: tegra: move debug-macro.S to include/debug Move Tegra's debug-macro.S over to the common debug macro directory. Move Tegra's debug UART selection menu into ARM's Kconfig.debug, so that all related options are selected in the same place. Tegra's uncompress.h is left in mach-tegra/include/mach; it will be removed whenever Tegra is converted to multi-platform. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-25 15:54:56 -06:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: tegra: move debug-macro.S to include/debug Move Tegra's debug-macro.S over to the common debug macro directory. Move Tegra's debug UART selection menu into ARM's Kconfig.debug, so that all related options are selected in the same place. Tegra's uncompress.h is left in mach-tegra/include/mach; it will be removed whenever Tegra is converted to multi-platform. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-25 15:54:56 -06:00
ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco prima2 and marco has different memory base, the old code will fail if we enable DEBUG_LL in marco. this patch adds two debuf port, while debugging, we select one of PRIMA2 and MARCO debug ports, in the products, we disable DEBUG_LL. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2012-12-20 19:45:25 +08:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: sti: move DEBUG_STI_UART into alphabetical order This was accidentally added in the wrong place, messing up the ordering of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05 16:08:44 +02:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: sti: move DEBUG_STI_UART into alphabetical order This was accidentally added in the wrong place, messing up the ordering of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05 16:08:44 +02:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: sti: move DEBUG_STI_UART into alphabetical order This was accidentally added in the wrong place, messing up the ordering of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05 16:08:44 +02:00
ARM: u300: move debugmacro to debug includes This moves the U300 debug macro to the debug headers to make way for multiplatform support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-02 16:34:19 +02:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: u300: move debugmacro to debug includes This moves the U300 debug macro to the debug headers to make way for multiplatform support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-02 16:34:19 +02:00
ARM: ux500: move debugmacro to debug includes This moves the Ux500 debug macro to the debug headers to make way for multiplatform support. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-19 11:01:36 +01:00
ARM: vexpress: Config option for early printk console Versatile Express platform can be used in different configurations, the console UART used by early printk may be located at different addresses in the address space. This patch makes it possible to select the base address of a PL011 UART to be used as a console output in the kernel configuration. The default behaviour is still the heuristic detecting memory map on Cortex-A core tiles. The zImage decompressor will use the same configuration values or print out nothing if DEBUG_LL is not enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-11 17:07:25 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: vexpress: Config option for early printk console Versatile Express platform can be used in different configurations, the console UART used by early printk may be located at different addresses in the address space. This patch makes it possible to select the base address of a PL011 UART to be used as a console output in the kernel configuration. The default behaviour is still the heuristic detecting memory map on Cortex-A core tiles. The zImage decompressor will use the same configuration values or print out nothing if DEBUG_LL is not enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-11 17:07:25 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: vexpress: Config option for early printk console Versatile Express platform can be used in different configurations, the console UART used by early printk may be located at different addresses in the address space. This patch makes it possible to select the base address of a PL011 UART to be used as a console output in the kernel configuration. The default behaviour is still the heuristic detecting memory map on Cortex-A core tiles. The zImage decompressor will use the same configuration values or print out nothing if DEBUG_LL is not enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-11 17:07:25 +01:00
ARM: vexpress: Add Cortex-R Series UART, selectable via DEBUG_LL The Cortex-R series processors on Versatile Express have a different memory map to the RS1 and CA9X4 tiles. Most of the platform difference can be expressed in device-trees, but the UART definitions for LL_DEBUG cannot. This patch defines the UART location for R-Series processors on versatile-express, allowing low-level debug and output from the decompressor. These definitions are selectable via Kconfig Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> CC: Pawel Moll <pawel.moll@arm.com>
2012-08-30 13:46:44 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: vexpress: Add Cortex-R Series UART, selectable via DEBUG_LL The Cortex-R series processors on Versatile Express have a different memory map to the RS1 and CA9X4 tiles. Most of the platform difference can be expressed in device-trees, but the UART definitions for LL_DEBUG cannot. This patch defines the UART location for R-Series processors on versatile-express, allowing low-level debug and output from the decompressor. These definitions are selectable via Kconfig Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> CC: Pawel Moll <pawel.moll@arm.com>
2012-08-30 13:46:44 +01:00
arm: vt8500: Convert debug-macro.S to be multiplatform friendly This patch moves debug-macro.S from arm/mach-vt8500/include/mach to arm/include/debug/vt8500.S to provide multiplatform support. Minor style changes in code for readability. Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
2012-12-28 12:09:18 +13:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: initial multiplatform support This lets us build a multiplatform kernel for experimental purposes. However, it will not be useful for any real work, because it relies on a number of useful things to be disabled for now: * SMP support must be turned off because of conflicting symbols. Marc Zyngier has proposed a solution by adding a new SOC operations structure to hold indirect function pointers for these, but that work is currently stalled * We turn on SPARSE_IRQ unconditionally, which is not supported on most platforms. Each of them is currently in a different state, but most are being worked on. * A common clock framework is in place since v3.4 but not yet being used. Work on this is on its way. * DEBUG_LL for early debugging is currently disabled. * THUMB2_KERNEL does not work with allyesconfig because the kernel gets too big [Rob Herring]: Rebased to not be dependent on the mass mach header rename. As a result, omap2plus, imx, mxs and ux500 are not converted. Highbank, picoxcell, mvebu, and socfpga are converted. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Acked-by: Jamie Iles <jamie@jamieiles.com> Cc: Dinh Nguyen <dinguyen@altera.com>
2012-09-06 13:41:12 -05:00
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:04 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
ARM: debug: fix wording error in DEBUG_LL_UART_NONE option help The DEBUG_LL_UART_NONE option was moved from the top of the list to the bottom - unfortunately, it still referred to the options "below" rather than "above". Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:02:00 +01:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:04 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:04 -08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23 17:44:05 +00:00
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:04 -08:00
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 11:30:31 +01:00
ARM: 7521/1: Fix semihosting Kconfig text It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-06 21:24:32 +01:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 11:30:31 +01:00
ARM: 7521/1: Fix semihosting Kconfig text It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-06 21:24:32 +01:00
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 11:30:31 +01:00
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:03 -08:00
ARM: 7521/1: Fix semihosting Kconfig text It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-06 21:24:32 +01:00
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 11:30:31 +01:00
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:04 -08:00
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 11:30:31 +01:00
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:33:04 -08:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: 7850/1: DEBUG_LL on efm32 SoCs This implements output of debug messages on efm32 SoCs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-08 16:44:17 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-01 18:58:51 +01:00
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-04 18:03:10 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs Extend imx6q DEBUG_LL uart port selection support to cover all i.MX SoCs. The 'range' of the Kconfig option gets dropped, as users looking at the option must know the uart number on his board. The bottom line is that the build system will report an error if an invalid port number is picked for given SoC. The header arch/arm/include/debug/imx-uart.h is created to accommodate all the uart base addresses. And the header will also be used for other low-level debug facility later. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 19:03:53 +08:00
ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART" Commit f8c95fe (ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs) had a typo that DEBUG_IMX50_IMX53_UART should be DEBUG_IMX53_UART. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-11 14:16:00 +01:00
ARM: imx: enable low-level debug support for imx6sl Enable low-level debug support for i.MX6 SoloLite by adding the debug port definitions for the SoC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-03 11:21:03 +08:00
ARM: imx6q: let users input debug uart port number imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 13:44:29 +08:00
ARM: imx: add dependency check for DEBUG_IMX_UART_PORT While adding i.MX DEBUG_LL selection, commit f8c95fe (ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs) leaves Kconfig symbol DEBUG_IMX_UART_PORT there without any dependency check. This results in that everyone gets the symbol in their config, which is someting undesirable. Add "depends on ARCH_MXC" for the symbol to prevent that. Reported-by: Karl Beldan <karl.beldan@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-13 10:52:49 +08:00
ARM: imx6q: let users input debug uart port number imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 13:44:29 +08:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: sti: Add DEBUG_LL console support This patch adds low level debug uart support to sti based SOCs. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 12:15:32 +01:00
ARM: debug: clean up low level kernel debugging selection It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 14:23:30 +01:00
ARM: sti: Add DEBUG_LL console support This patch adds low level debug uart support to sti based SOCs. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 12:15:32 +01:00
ARM: 7859/1: debug: Create CONFIG_DEBUG_MSM_UART and re-organize the selects for MSM Create the hidden config DEBUG_MSM_UART and clean-up the default selection for CONFIG_DEBUG_LL_INCLUDE. Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-17 22:07:27 +01:00
ARM: move debug macros to common location Based on suggestion by Russell King, create a common location for debug macros and select the included debug macro file using config option. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-08-31 00:03:46 -05:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-04 18:03:10 +01:00
ARM: 7850/1: DEBUG_LL on efm32 SoCs This implements output of debug messages on efm32 SoCs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-08 16:44:17 +01:00
ARM: move debug macros to common location Based on suggestion by Russell King, create a common location for debug macros and select the included debug macro file using config option. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-08-31 00:03:46 -05:00
ARM: imx: move debug macros to include/debug Move imx debug-macro.S over to common debug macro directory. It removes the inclusion to hardware.h by hard-coding the physical address of uart port and copying IMX_IO_P2V from hardware.h. Since we will need a common solution, which might use a fixed virtual address for uart port across platforms, we make a copy of IMX_IO_P2V here as a temporary solution to enable low-level debug for imx multi-platform build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-16 20:50:45 +08:00
ARM: imx: use separated debug uart symbol for imx31 and imx35 It's improper to use combined symbol DEBUG_IMX31_IMX35_UART for imx31 and imx35, because imx31 has 5 UARTs while imx35 only has 3. So later when we add UART port selection for DEBUG_IMX31_IMX35_UART, we will have problem. Use separated Kconfig options for imx31 and imx35 debug uart selection. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 18:54:01 +08:00
ARM: imx: move debug macros to include/debug Move imx debug-macro.S over to common debug macro directory. It removes the inclusion to hardware.h by hard-coding the physical address of uart port and copying IMX_IO_P2V from hardware.h. Since we will need a common solution, which might use a fixed virtual address for uart port across platforms, we make a copy of IMX_IO_P2V here as a temporary solution to enable low-level debug for imx multi-platform build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-16 20:50:45 +08:00
ARM: imx: Remove mx508 support Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN for several releases. mx508 currently lacks clock support. In case someone needs to add mx508 support back, then the recommended approach is to use device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-22 10:40:55 -02:00
ARM: imx: enable low-level debug support for imx6sl Enable low-level debug support for i.MX6 SoloLite by adding the debug port definitions for the SoC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-03 11:21:03 +08:00
ARM: 7859/1: debug: Create CONFIG_DEBUG_MSM_UART and re-organize the selects for MSM Create the hidden config DEBUG_MSM_UART and clean-up the default selection for CONFIG_DEBUG_LL_INCLUDE. Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-17 22:07:27 +01:00
ARM: OMAP2+: Add multiplatform debug_ll support Add multiplatform debug_ll support by stripping away the custom hacks to detect the port from debug-macro.S. Note that this now requires the specific debug_ll port to be selected in the .config. The old debug-macro.S will be removed a bit later once we are sure things work properly with multiplatform enabled. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11 11:24:19 -08:00
ARM: sirf: move debug-macro.S to include/debug/sirf.S The new style ll_debug implementation for multiplatform requires the platform glue to be in include/debug, so let's move it there to separate the debugging logic from the platform code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Barry Song <Baohua.Song@csr.com>
2013-03-19 13:52:14 +01:00
ARM: sti: Add DEBUG_LL console support This patch adds low level debug uart support to sti based SOCs. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 12:15:32 +01:00
ARM: arm-soc board specific changes for 3.10, part 1 These changes are all for board specific files. These used to make up a large portion of the ARM changes in the past, but as we are generalizing the support and moving to device tree probing, this has gotten significantly smaller. The only platform actually adding new code here at the moment is Renesas shmobile, as they are still busy converting their code to device tree and have not come far enough to not need it. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRhKYeAAoJEIwa5zzehBx3ez8QAKLnzjAQJzhfJezJ+g02tXS9 xIikiX1zmEb3HuF8Z/SFRWVj2Zbe+cBaDpr7JERmmOTWWUtxHbqIPFr2xUbyi0qY d1yBFEtAv+Pf6lgIGRHPejCXigInp0ew94+VMih7rOVkXdNZqLBP+Z4CEntoak+H 1+c4MvW/37VlyQUnsrQgUcC7mu9lSIVwJjYXCGJVs4cKwYYnLNH6tLINx62SOCkW cdoJV/eTvRWD6Wx8kxvNE7WJMVNuB8e7R7DKkn5SES9beWJ1tvcGtNS2KaK8rFdC Xee8SNo2RzxDQwtkPYA2iZg9Gs3vxNEiy3AX0Tsvji7a3ipQk/M13NlOa1h+tu4w 8wNZDccYOsFejlnpnDWk64eVmu2w0c58CWbRaPYOOkGJ5pTnZ9+2cO7CLTOmQWrb y2Vdly10vQR7AbnlgLlx9RuIAdAVoMGVwCO1JrnBonRriXQCq/vSEFfhKbLK4/MO FYyW+sy222f+kv1JrEdffO7rdIc/EdHRkiGSeVFQ63ETl6F+wx7zEMwb+RV2ysi3 zQQJDeMTrP9StqKaBfyOS3IF+Jbv/f4dM6oKxwlyR5kwuO+J1H6yFG3ugBSuED82 eUz1O35Q1JY593qS8XD22wMjRQt3xhwdrD0hAZnCbUiJxe1Tatf16bBloBQ8vwsY hHdiINWICRawVJLK7SZB =2cfP -----END PGP SIGNATURE----- Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board specific changes (part 1) from Olof Johansson: "These changes are all for board specific files. These used to make up a large portion of the ARM changes in the past, but as we are generalizing the support and moving to device tree probing, this has gotten significantly smaller. The only platform actually adding new code here at the moment is Renesas shmobile, as they are still busy converting their code to device tree and have not come far enough to not need it." * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: msm: USB_MSM_OTG needs USB_PHY ARM: davinci: da850 evm: fix const qualifier placement ARM: davinci: da850 board: add remoteproc support ARM: pxa: move debug uart code ARM: pxa: select PXA935 on saar & tavorevb ARM: mmp: add more compatible names in gpio driver ARM: pxa: move PXA_GPIO_TO_IRQ macro ARM: pxa: remove cpu_is_xxx in gpio driver ARM: Kirkwood: update Network Space Mini v2 description ARM: Kirkwood: DT board setup for CloudBox ARM: Kirkwood: sort board entries by ASCII-code order ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor omap2+: Remove useless Makefile line omap2+: Remove useless Makefile line ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d ARM: OMAP1: fix omap_udc registration ARM: davinci: use is IS_ENABLED macro ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig ...
2013-05-04 12:34:30 -07:00
ARM: debug: move PL01X debug include into arch/arm/include/debug/ Now that the PL01X debug include can mostly stand alone without requiring platforms to provide any macros, move it into the debug directory so it can be directly included. This allows us to get rid of a lot of debug-macros include files. The autodetect case for Versatile Express and the ux500 are left alone; these are more complicated implementations. Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:36:46 +01:00
ARM: imx: add low-level debug for vybrid Add low-level debug support for vybrid, so that earlyprintk can be enabled for debugging early boot issue. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-12 17:22:17 +08:00
arm: vt8500: Convert debug-macro.S to be multiplatform friendly This patch moves debug-macro.S from arm/mach-vt8500/include/mach to arm/include/debug/vt8500.S to provide multiplatform support. Minor style changes in code for readability. Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
2012-12-28 12:09:18 +13:00
ARM: zynq: make use of debug_ll_io_init() Convert low-level debugging routines to make use of debug_ll_io_init(). This is part of the preparation for ARCH_MULTIPLATFORM support for Zynq. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-19 10:16:01 -06:00
ARM: move debug macros to common location Based on suggestion by Russell King, create a common location for debug macros and select the included debug macro file using config option. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-08-31 00:03:46 -05:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: move SPEAr debug to generic PL01x code The SPEAr debug code is a copy of the PL01x debugging code, so rather than have this pointless code duplication, lets just use the standard implementation instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:38:18 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: debug: provide 8250 debug uart flow control configuration option Move the definition out of the machine class debug-macro.S header into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 22:59:10 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: debug: move keystone debug to generic 8250 code Keystone's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:05:49 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: 7850/1: DEBUG_LL on efm32 SoCs This implements output of debug messages on efm32 SoCs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-08 16:44:17 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: move SPEAr debug to generic PL01x code The SPEAr debug code is a copy of the PL01x debugging code, so rather than have this pointless code duplication, lets just use the standard implementation instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:38:18 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: move SPEAr debug to generic PL01x code The SPEAr debug code is a copy of the PL01x debugging code, so rather than have this pointless code duplication, lets just use the standard implementation instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:38:18 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: 7826/1: debug: support debug ll on hisilicon soc Support UART0 debug ll on Hisilicon Hi3620 SoC & Hi3716 SoC. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-24 06:58:39 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: 7850/1: DEBUG_LL on efm32 SoCs This implements output of debug messages on efm32 SoCs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-08 16:44:17 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: move SPEAr debug to generic PL01x code The SPEAr debug code is a copy of the PL01x debugging code, so rather than have this pointless code duplication, lets just use the standard implementation instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:38:18 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: 7826/1: debug: support debug ll on hisilicon soc Support UART0 debug ll on Hisilicon Hi3620 SoC & Hi3716 SoC. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-24 06:58:39 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: move keystone debug to generic 8250 code Keystone's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:05:49 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: 7827/1: highbank: fix debug uart virtual address for LPAE Section entries are 2MB on LPAE, so the DEBUG_LL virtual address must have the same offset in the 2MB section as the physical address. This fixes async external aborts when DEBUG_LL is enabled on Midway. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-27 14:32:49 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide PL01x debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 12:32:16 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: debug: provide 8250 debug uart phys/virt address configuration options Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 00:01:39 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: debug: provide 8250 debug uart register shift configuration option Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 23:13:15 +01:00
ARM: debug: provide 8250 debug uart flow control configuration option Move the definition out of the machine class debug-macro.S header into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 22:59:10 +01:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: debug: move keystone debug to generic 8250 code Keystone's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:05:49 +01:00
ARM: debug: move davinci debug to generic 8250 code Davinci's debugging is just a copy of the old 8250_32 code with a different base address. Incorporate this into the generic 8250 debug code. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 16:18:34 +01:00
ARM: debug: add support for word accesses to debug/8250.S Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 11:42:46 +01:00
ARM: debug: provide 8250 debug uart flow control configuration option Move the definition out of the machine class debug-macro.S header into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 22:59:10 +01:00
ARM: debug: provide generic option choices for 8250 and PL01x ports Provide generic option choices for 8250 and PL01x UART ports; these can now be selected by UART type rather than asking about the platform. This means that a kernel configuration user can manually choose the various parameters of the debug UART without resorting to the platform having to encode the possible settings. These two generic options are preferred over further debug entries for these ports; the existing options which refer back to the 8250 and PL01x ports are now considered deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-07 15:29:38 +01:00
ARM: debug: provide 8250 debug uart flow control configuration option Move the definition out of the machine class debug-macro.S header into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 22:59:10 +01:00
ARM: 7672/1: uncompress debug support for multiplatform build Instead of giving zero support of uncompress debug for multiplatform build, the patch turns uncompress debug into one part of DEBUG_LL support. When DEBUG_LL is turned on for a particular platform, uncompress debug works too for that platform. OMAP and Tegra are exceptions here. OMAP low-level debug code places data in the .data section, and that is not allowed in decompressor. And Tegra code has reference to variable that's unavailable in decompressor but only in kernel. That's why Kconfig symbol DEBUG_UNCOMPRESS controlling multiplatform uncompress debug support is defined with !DEBUG_OMAP2PLUS_UART && !DEBUG_TEGRA_UART. It creates arch/arm/boot/compressed/debug.S with CONFIG_DEBUG_LL_INCLUDE included there, implements a generic putc() using those macros, which will be built when DEBUG_UNCOMPRESS is defined. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-14 08:48:06 +01:00
Here is the Samsung PWM cleanup series for you. Particular patches of the series involve following modifications: 1) fixing up few things in samsung_pwm_timer clocksource driver, 2) moving remaining Samsung platforms to the new clocksource driver, 3) removing old clocksource driver, 4) adding new multiplatform- and DT-aware PWM driver, 5) moving all Samsung platforms to use the new PWM driver, 6) removing old PWM driver, 7) removing all PWM-related code that is not used anymore. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.20 (GNU/Linux) iQIcBAABAgAGBQJSCT7XAAoJEIv3Hb8G/Xru/rcP/012END3oSxl+G1C0akZ+1Ko uZZXib9c1g7TzsE2lR1YRyZvKIylMEiETEupIf0gnliulSfQFKYN+0FMbqVfdYXZ fKYRA6rJV/b+lu6cY6E0Q12uXH1Cbrgk5Puqx09AXiR142E2DgCpt0A0aagYDff3 P5nNxs1TcBTWcRdFgE5YytkdNtd9W5V87FEzctj4ENByXtayadcFPLjucmgfyrPo m763wmkoo6drnOnmpg+38yRKPm725tVami2Z0XN6FeFC7BYXa6VfqBdSkuhx8KDQ BbO2BUQeaLhpNM1LICfhD0w9VTXhPBLP1GA3qnNa9JCw+vO6dQEPwzMG9+gSKdqa jeFM9Vz11bqWfo5scI/5/tUxx2WOSqG3mq3LfMFKjRW6UCrUkVBYvBQCKHK6BF22 Bnh5o5wpZDEHUJqjgdUeY+hjU6vhGTxa7VERZ1vBDn5h1EyLGq7YzLdEFdhaxRAk TShtoNXi7gD9JhoJkR5I4el5+I05sCdDS4NNNfoYTb2b/zxTpGzy+lZpBk3HuE+A fbe5zJVL4wsU88Li2vQ2oIUXOW2TIJDXAC1zV7N9GuIrDPxSPIoDcaFX68Ydfxy1 h7jzXCxTgJdVXQV4An8aviQ4CIOtKkiWFoFlArS2CrroHhHYwhQznlwHQ1R7YTI1 3ICxJdK4uPfQ1HQZQcxR =xmmW -----END PGP SIGNATURE----- Merge tag 'v3.12-pwm-cleanup-for-olof' of git://github.com/tom3q/linux into next/cleanup From Tomasz Figa: Here is the Samsung PWM cleanup series. Particular patches of the series involve following modifications: - fixing up few things in samsung_pwm_timer clocksource driver, - moving remaining Samsung platforms to the new clocksource driver, - removing old clocksource driver, - adding new multiplatform- and DT-aware PWM driver, - moving all Samsung platforms to use the new PWM driver, - removing old PWM driver, - removing all PWM-related code that is not used anymore. * tag 'v3.12-pwm-cleanup-for-olof' of git://github.com/tom3q/linux: (684 commits) ARM: SAMSUNG: Remove plat/regs-timer.h header ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header ARM: SAMSUNG: Remove pwm-clock infrastructure ARM: SAMSUNG: Remove old PWM timer platform devices pwm: Remove superseded pwm-samsung-legacy driver ARM: SAMSUNG: Modify board files to use new PWM platform device ARM: SAMSUNG: Rework private data handling in dev-backlight pwm: Add new pwm-samsung driver pwm: samsung: Rename to pwm-samsung-legacy ARM: SAMSUNG: Remove unused PWM timer IRQ chip code ARM: SAMSUNG: Remove old samsung-time driver ARM: SAMSUNG: Move all platforms to new clocksource driver ARM: SAMSUNG: Set PWM platform data ARM: SAMSUNG: Add new PWM platform device ARM: SAMSUNG: Unify base address definitions of timer block clocksource: samsung_pwm_timer: Handle suspend/resume correctly clocksource: samsung_pwm_timer: Do not use clocksource_mmio clocksource: samsung_pwm_timer: Cache clocksource register address clocksource: samsung_pwm_timer: Correct definition of AUTORELOAD bit clocksource: samsung_pwm_timer: Do not request PWM mem region + v3.11-rc4 Conflicts: arch/arm/Kconfig.debug Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-13 23:33:07 -07:00
ARM: document DEBUG_UNCOMPRESS Kconfig option This non-user visible option lacked any kind of documentation. This is quite common for non-user visible options; certian people can't understand the point of documenting such options with help text. However, here we have a case in point: developers don't understand the option either, as they were thinking that when the option is not set, the decompressor should produce no output what so ever. This is incorrect, as the purpose of this option is to control whether a multiplatform kernel uses the kernel debugging macros to produce output or not. So let's document this via help rather than commentry to prevent others falling into this misunderstanding. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 17:54:27 +01:00
ARM: 7806/1: allow DEBUG_UNCOMPRESS for Tegra DEBUG_UNCOMPRESS was previously disallowed for Tegra due to tegra.S's use of global data that was not linked into the decompressor. Solve this by declaring this symbol in tegra.S when it is being built into the decompressor. For the kernel proper, leave the declaration in mach-tegra/common.c as explained in the comment. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-02 20:53:37 +01:00
ARM: document DEBUG_UNCOMPRESS Kconfig option This non-user visible option lacked any kind of documentation. This is quite common for non-user visible options; certian people can't understand the point of documenting such options with help text. However, here we have a case in point: developers don't understand the option either, as they were thinking that when the option is not set, the decompressor should produce no output what so ever. This is incorrect, as the purpose of this option is to control whether a multiplatform kernel uses the kernel debugging macros to produce output or not. So let's document this via help rather than commentry to prevent others falling into this misunderstanding. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 17:54:27 +01:00
ARM: 7672/1: uncompress debug support for multiplatform build Instead of giving zero support of uncompress debug for multiplatform build, the patch turns uncompress debug into one part of DEBUG_LL support. When DEBUG_LL is turned on for a particular platform, uncompress debug works too for that platform. OMAP and Tegra are exceptions here. OMAP low-level debug code places data in the .data section, and that is not allowed in decompressor. And Tegra code has reference to variable that's unavailable in decompressor but only in kernel. That's why Kconfig symbol DEBUG_UNCOMPRESS controlling multiplatform uncompress debug support is defined with !DEBUG_OMAP2PLUS_UART && !DEBUG_TEGRA_UART. It creates arch/arm/boot/compressed/debug.S with CONFIG_DEBUG_LL_INCLUDE included there, implements a generic putc() using those macros, which will be built when DEBUG_UNCOMPRESS is defined. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-14 08:48:06 +01:00
ARM: 7671/1: use Kconfig to select uncompress.h Following the approach handling DEBUG_LL inclusion, the patch creates a Kconfig symbol CONFIG_UNCOMPRESS_INCLUDE for choosing the correct uncompress header. For traditional build, mach/uncompress.h will be included in arch/arm/boot/compressed/misc.c. For multiplatform build, debug/uncompress.h which contains a suite of empty functions will be used. In this way, a platform with particular uncompress.h implementation could choose its own uncompress.h with this Kconfig option. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-14 08:47:27 +01:00
ARM: msm: Move debug-macro.S to include/debug One more step to allowing MSM to participate in the multi-platform defconfig. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb: Comment cleanup requested by sboyd] Signed-off-by: David Brown <davidb@codeaurora.org>
2013-07-24 13:54:28 -07:00
ARM: 7671/1: use Kconfig to select uncompress.h Following the approach handling DEBUG_LL inclusion, the patch creates a Kconfig symbol CONFIG_UNCOMPRESS_INCLUDE for choosing the correct uncompress header. For traditional build, mach/uncompress.h will be included in arch/arm/boot/compressed/misc.c. For multiplatform build, debug/uncompress.h which contains a suite of empty functions will be used. In this way, a platform with particular uncompress.h implementation could choose its own uncompress.h with this Kconfig option. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-14 08:47:27 +01:00
ARM: Add an earlyprintk debug console This patch allows an earlyprintk console if CONFIG_DEBUG_LL is enabled, using the printch asm function. The patch is based on the original work by Sascha Hauer. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz>
2009-12-09 10:02:18 +00:00
ARM: 5841/1: a driver for on-chip ETM and ETB This driver implements support for on-chip Embedded Tracing Macrocell and Embedded Trace Buffer. It allows to trigger tracing of kernel execution flow and exporting trace output to userspace via character device and a sysrq combo. Trace output can then be decoded by a fairly simple open source tool [1] which is already sufficient to get the idea of what the kernel is doing. [1]: http://github.com/virtuoso/etm2human Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 14:00:51 +01:00
ARM: OC_ETM should not select ARM_AMBA The CONFIG_ARM_AMBA symbol is selected by the platforms that support AMBA, and the other platforms (e.g. orion) might not be able to build that code at all when they do not support the clk API. Instead, make sure that OC_ETM is only built on platforms that do support the amba subsystem already. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-07 10:02:35 +02:00
ARM: 5841/1: a driver for on-chip ETM and ETB This driver implements support for on-chip Embedded Tracing Macrocell and Embedded Trace Buffer. It allows to trigger tracing of kernel execution flow and exporting trace output to userspace via character device and a sysrq combo. Trace output can then be decoded by a fairly simple open source tool [1] which is already sufficient to get the idea of what the kernel is doing. [1]: http://github.com/virtuoso/etm2human Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 14:00:51 +01:00
ARM: kprobes: Add config option for selecting the ARM kprobes tests Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-08-27 12:36:58 +01:00
ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process This patch introduces a new Kconfig option which, when enabled, causes the kernel to write the PID of the current task into the PROCID field of the CONTEXTIDR on context switch. This is useful when analysing hardware trace, since writes to this register can be configured to emit an event into the trace stream. The thread notifier for writing the PID is deliberately kept separate from the ASID-writing code so that we can support newer processors using LPAE, where the ASID is stored in TTBR0. As such, the switch_mm code is updated to perform a read-modify-write sequence to ensure that we don't clobber the PID on CPUs using the classic 2-level page tables. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-06 15:43:03 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00