kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-28 19:20:30 +00:00
Code Issues Releases Packages Activity
linux/drivers/md/dm-crypt.c

2050 lines
48 KiB
Raw Permalink Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: make wipe message also wipe essiv key The "wipe key" message is used to wipe the volume key from memory temporarily, for example when suspending to RAM. But the initialisation vector in ESSIV mode is calculated from the hashed volume key, so the wipe message should wipe this IV key too and reinitialise it when the volume key is reinstated. This patch adds an IV wipe method called from a wipe message callback. ESSIV is then reinitialised using the init function added by the last patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:57 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add completion for async dm-crypt: Use crypto ablkcipher interface Prepare completion for async crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:09 +00:00
[BLOCK] dm-crypt: Use block ciphers where applicable This patch converts dm-crypt to use the new block cipher type where applicable. It also changes simple cipher operations to use the new encrypt_one/decrypt_one interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 20:29:17 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] separate bdi congestion functions from queue congestion functions Separate out the concept of "queue congestion" from "backing-dev congestion". Congestion is a backing-dev concept, not a queue concept. The blk_* congestion functions are retained, as wrappers around the core backing-dev congestion functions. This proper layering is needed so that NFS can cleanly use the congestion functions, and so that CONFIG_BLOCK=n actually links. Cc: "Thomas Maier" <balagi@justmail.de> Cc: "Jens Axboe" <jens.axboe@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: David Howells <dhowells@redhat.com> Cc: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-19 23:28:16 -07:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
atomic: use <linux/atomic.h> This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:09:06 -07:00
[PATCH] Use sg_set_buf/sg_init_one where applicable This patch uses sg_set_buf/sg_init_one in some places where it was duplicated. Signed-off-by: David Hardeman <david@2gen.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2005-09-17 17:55:31 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: remove dm header from targets Change #include "dm.h" to #include <linux/device-mapper.h> in all targets. Targets should not need direct access to internal DM structures. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:44:59 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add completion for async dm-crypt: Use crypto ablkcipher interface Prepare completion for async crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:09 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: rename struct convert_context sector field Rename sector to cc_sector in dm-crypt's convert_context struct. This is preparation for a future patch that merges dm_io and convert_context which both have a "sector" field. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: move convert_context inside dm_crypt_io Move convert_context inside dm_crypt_io. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:38 +00:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: move convert_context inside dm_crypt_io Move convert_context inside dm_crypt_io. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:38 +00:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: move convert_context inside dm_crypt_io Move convert_context inside dm_crypt_io. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:38 +00:00
dm crypt: store sector mapping in dm_crypt_io Add sector into dm_crypt_io instead of using local variable. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:54 +00:00
dm crypt: fix async split When writing io, dm-crypt has to allocate a new cloned bio and encrypt the data into newly-allocated pages attached to this bio. In rare cases, because of hw restrictions (e.g. physical segment limit) or memory pressure, sometimes more than one cloned bio has to be used, each processing a different fragment of the original. Currently there is one waitqueue which waits for one fragment to finish and continues processing the next fragment. But when using asynchronous crypto this doesn't work, because several fragments may be processed asynchronously or in parallel and there is only one crypt context that cannot be shared between the bio fragments. The result may be corruption of the data contained in the encrypted bio. The patch fixes this by allocating new dm_crypt_io structs (with new crypto contexts) and running them independently. The fragments contains a pointer to the base dm_crypt_io struct to handle reference counting, so the base one is properly deallocated after all the fragments are finished. In a low memory situation, this only uses one additional object from the mempool. If the mempool is empty, the next allocation simple waits for previous fragments to complete. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:45:02 +01:00
dm crypt: move convert_context inside dm_crypt_io Move convert_context inside dm_crypt_io. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:38 +00:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: tidy whitespace Clean up, convert some spaces to tabs. No functional change here. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:42:37 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: make wipe message also wipe essiv key The "wipe key" message is used to wipe the volume key from memory temporarily, for example when suspending to RAM. But the initialisation vector in ESSIV mode is calculated from the hashed volume key, so the wipe message should wipe this IV key too and reinitialise it when the volume key is reinstated. This patch adds an IV wipe method called from a wipe message callback. ESSIV is then reinitialised using the init function added by the last patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:57 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: move private iv fields to structs Define private structures for IV so it's easy to add further attributes in a following patch which fixes the way key material is wiped from memory. Also move ESSIV destructor and remove unnecessary 'status' operation. There are no functional changes in this patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:55 +00:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: move private iv fields to structs Define private structures for IV so it's easy to add further attributes in a following patch which fixes the way key material is wiped from memory. Also move ESSIV destructor and remove unnecessary 'status' operation. There are no functional changes in this patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:55 +00:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm crypt: use private biosets In the low memory situation dm-crypt needs to use a private mempool of bios to avoid blocking. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:40 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: simplify compatible table output Rename cc->cipher_mode to cc->cipher_string and store the whole of the cipher information so it can easily be printed when processing the DM_DEV_STATUS ioctl. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:52 +00:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[CRYPTO] dm-crypt: Make iv_gen_private a union Rather than stuffing integers into pointers with casts, let's use a union. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-05 13:41:52 -08:00
dm crypt: move private iv fields to structs Define private structures for IV so it's easy to add further attributes in a following patch which fixes the way key material is wiped from memory. Also move ESSIV destructor and remove unnecessary 'status' operation. There are no functional changes in this patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:55 +00:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
[CRYPTO] dm-crypt: Make iv_gen_private a union Rather than stuffing integers into pointers with casts, let's use a union. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-05 13:41:52 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm crypt: use private biosets In the low memory situation dm-crypt needs to use a private mempool of bios to avoid blocking. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:40 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] slab: remove kmem_cache_t Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06 20:33:20 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: use kmem_cache macro Use new KMEM_CACHE() macro and make the newly-exposed structure names more meaningful. Also remove some superfluous casts and inlines (let a modern compiler be the judge). Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 17:26:32 +01:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: fix call to clone_init Call clone_init early We need to call clone_init as early as possible - at least before call bio_put(clone) in any error path. Otherwise, the destructor will try to dereference bi_private, which may still be NULL. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:52 -07:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[BLOCK] dm-crypt: trivial comment improvements Just some minor comment nits. - little-endian is better than low-endian - and since it is called essiv everywere it should also be essiv in the comments (and not ess_iv) Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-02 18:17:33 +10:00
Fix misspellings of "system", "controller", "interrupt" and "necessary". Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:10:43 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add plain64 iv The default plain IV is 32-bit only. This plain64 IV provides a compatible mode for encrypted devices bigger than 4TB. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:25 +00:00
[BLOCK] dm-crypt: trivial comment improvements Just some minor comment nits. - little-endian is better than low-endian - and since it is called essiv everywere it should also be essiv in the comments (and not ess_iv) Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-02 18:17:33 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
dm crypt: add null iv Add a new IV generation method 'null' to read old filesystem images created with SuSE's loop_fish2 module. Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Acked-By: Christophe Saout <christophe@saout.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:55 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: suppress endian warnings Suppress sparse warnings about cpu_to_le32() by using __le32 types for on-disk data etc. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:01 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add plain64 iv The default plain IV is 32-bit only. This plain64 IV provides a compatible mode for encrypted devices bigger than 4TB. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:25 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: add plain64 iv The default plain IV is 32-bit only. This plain64 IV provides a compatible mode for encrypted devices bigger than 4TB. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:25 +00:00
dm: suppress endian warnings Suppress sparse warnings about cpu_to_le32() by using __le32 types for on-disk data etc. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:01 +01:00
dm crypt: add plain64 iv The default plain IV is 32-bit only. This plain64 IV provides a compatible mode for encrypted devices bigger than 4TB. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:25 +00:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: make wipe message also wipe essiv key The "wipe key" message is used to wipe the volume key from memory temporarily, for example when suspending to RAM. But the initialisation vector in ESSIV mode is calculated from the hashed volume key, so the wipe message should wipe this IV key too and reinitialise it when the volume key is reinstated. This patch adds an IV wipe method called from a wipe message callback. ESSIV is then reinitialised using the init function added by the last patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:57 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: make wipe message also wipe essiv key The "wipe key" message is used to wipe the volume key from memory temporarily, for example when suspending to RAM. But the initialisation vector in ESSIV mode is calculated from the hashed volume key, so the wipe message should wipe this IV key too and reinitialise it when the volume key is reinstated. This patch adds an IV wipe method called from a wipe message callback. ESSIV is then reinitialised using the init function added by the last patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:57 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: make wipe message also wipe essiv key The "wipe key" message is used to wipe the volume key from memory temporarily, for example when suspending to RAM. But the initialisation vector in ESSIV mode is calculated from the hashed volume key, so the wipe message should wipe this IV key too and reinitialise it when the volume key is reinstated. This patch adds an IV wipe method called from a wipe message callback. ESSIV is then reinitialised using the init function added by the last patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:57 +00:00
dm crypt: move private iv fields to structs Define private structures for IV so it's easy to add further attributes in a following patch which fixes the way key material is wiped from memory. Also move ESSIV destructor and remove unnecessary 'status' operation. There are no functional changes in this patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:55 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move private iv fields to structs Define private structures for IV so it's easy to add further attributes in a following patch which fixes the way key material is wiped from memory. Also move ESSIV destructor and remove unnecessary 'status' operation. There are no functional changes in this patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:55 +00:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: move private iv fields to structs Define private structures for IV so it's easy to add further attributes in a following patch which fixes the way key material is wiped from memory. Also move ESSIV destructor and remove unnecessary 'status' operation. There are no functional changes in this patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:55 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: tidy whitespace Clean up, convert some spaces to tabs. No functional change here. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:42:37 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: restructure essiv error path Use kzfree for salt deallocation because it is derived from the volume key. Use a common error path in ESSIV constructor. Required by a later patch which fixes the way key material is wiped from memory. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: restructure essiv error path Use kzfree for salt deallocation because it is derived from the volume key. Use a common error path in ESSIV constructor. Required by a later patch which fixes the way key material is wiped from memory. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
[CRYPTO] users: Use crypto_hash interface instead of crypto_digest This patch converts all remaining crypto_digest users to use the new crypto_hash interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-24 19:10:20 +10:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
dm crypt: restructure essiv error path Use kzfree for salt deallocation because it is derived from the volume key. Use a common error path in ESSIV constructor. Required by a later patch which fixes the way key material is wiped from memory. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: restructure essiv error path Use kzfree for salt deallocation because it is derived from the volume key. Use a common error path in ESSIV constructor. Required by a later patch which fixes the way key material is wiped from memory. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
dm crypt: restructure essiv error path Use kzfree for salt deallocation because it is derived from the volume key. Use a common error path in ESSIV constructor. Required by a later patch which fixes the way key material is wiped from memory. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: restructure essiv error path Use kzfree for salt deallocation because it is derived from the volume key. Use a common error path in ESSIV constructor. Required by a later patch which fixes the way key material is wiped from memory. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: restructure essiv error path Use kzfree for salt deallocation because it is derived from the volume key. Use a common error path in ESSIV constructor. Required by a later patch which fixes the way key material is wiped from memory. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: suppress endian warnings Suppress sparse warnings about cpu_to_le32() by using __le32 types for on-disk data etc. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:01 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
[PATCH] LOG2: Implement a general integer log2 facility in the kernel This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Howells <dhowells@redhat.com> Cc: Wojtek Kaniewski <wojtekka@toxygen.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 02:37:49 -08:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
dm crypt: move private iv fields to structs Define private structures for IV so it's easy to add further attributes in a following patch which fixes the way key material is wiped from memory. Also move ESSIV destructor and remove unnecessary 'status' operation. There are no functional changes in this patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:55 +00:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
[CRYPTO] dm-crypt: Make iv_gen_private a union Rather than stuffing integers into pointers with casts, let's use a union. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-05 13:41:52 -08:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
[CRYPTO] dm-crypt: Make iv_gen_private a union Rather than stuffing integers into pointers with casts, let's use a union. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-05 13:41:52 -08:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
[CRYPTO] dm-crypt: Make iv_gen_private a union Rather than stuffing integers into pointers with casts, let's use a union. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-05 13:41:52 -08:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: add null iv Add a new IV generation method 'null' to read old filesystem images created with SuSE's loop_fish2 module. Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Acked-By: Christophe Saout <christophe@saout.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:55 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm: remove the second argument of k[un]map_atomic() Acked-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Cong Wang <amwang@redhat.com>
2011-11-28 13:26:02 +08:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm: remove the second argument of k[un]map_atomic() Acked-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Cong Wang <amwang@redhat.com>
2011-11-28 13:26:02 +08:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm: remove the second argument of k[un]map_atomic() Acked-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Cong Wang <amwang@redhat.com>
2011-11-28 13:26:02 +08:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm: remove the second argument of k[un]map_atomic() Acked-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Cong Wang <amwang@redhat.com>
2011-11-28 13:26:02 +08:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add plain64 iv The default plain IV is 32-bit only. This plain64 IV provides a compatible mode for encrypted devices bigger than 4TB. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:25 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: make wipe message also wipe essiv key The "wipe key" message is used to wipe the volume key from memory temporarily, for example when suspending to RAM. But the initialisation vector in ESSIV mode is calculated from the hashed volume key, so the wipe message should wipe this IV key too and reinitialise it when the volume key is reinstated. This patch adds an IV wipe method called from a wipe message callback. ESSIV is then reinitialised using the init function added by the last patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:57 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add null iv Add a new IV generation method 'null' to read old filesystem images created with SuSE's loop_fish2 module. Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Acked-By: Christophe Saout <christophe@saout.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:55 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: tidy whitespace Clean up, convert some spaces to tabs. No functional change here. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:42:37 +01:00
dm crypt: remove unnecessary crypt_context write parm Remove write attribute from convert_context and use bio flag instead. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:41 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: rename struct convert_context sector field Rename sector to cc_sector in dm-crypt's convert_context struct. This is preparation for a future patch that merges dm_io and convert_context which both have a "sector" field. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add completion for async dm-crypt: Use crypto ablkcipher interface Prepare completion for async crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:09 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: rename struct convert_context sector field Rename sector to cc_sector in dm-crypt's convert_context struct. This is preparation for a future patch that merges dm_io and convert_context which both have a "sector" field. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: extract scatterlist processing dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:04 +00:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: rename struct convert_context sector field Rename sector to cc_sector in dm-crypt's convert_context struct. This is preparation for a future patch that merges dm_io and convert_context which both have a "sector" field. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: tidy whitespace Clean up, convert some spaces to tabs. No functional change here. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:42:37 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: tidy ctx pending Move the initialisation of ctx->pending into one place, at the start of crypt_convert(). Introduce crypt_finished to indicate whether or not the encryption is finished, for use in a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
tree-wide: use reinit_completion instead of INIT_COMPLETION Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-14 14:32:02 -08:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: rename struct convert_context sector field Rename sector to cc_sector in dm-crypt's convert_context struct. This is preparation for a future patch that merges dm_io and convert_context which both have a "sector" field. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: rename struct convert_context sector field Rename sector to cc_sector in dm-crypt's convert_context struct. This is preparation for a future patch that merges dm_io and convert_context which both have a "sector" field. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: use cond_resched Add cond_resched() to prevent monopolising CPU when processing large bios. dm-crypt processes encryption of bios in sector units. If the bio request is big it can spend a long time in the encryption call. Signed-off-by: Milan Broz <mbroz@redhat.com> Tested-by: Yan Li <elliot.li.tech@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-02 09:34:28 +01:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: fix ctx pending Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:16:07 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: avoid unnecessary wait when splitting bio Don't wait between submitting crypt requests for a bio unless we are short of memory. There are two situations when we must split an encrypted bio: 1) there are no free pages; 2) the new bio would violate underlying device restrictions (e.g. max hw segments). In case (2) we do not need to wait. Add output variable to crypt_alloc_buffer() to distinguish between these cases. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: avoid unnecessary wait when splitting bio Don't wait between submitting crypt requests for a bio unless we are short of memory. There are two situations when we must split an encrypted bio: 1) there are no free pages; 2) the new bio would violate underlying device restrictions (e.g. max hw segments). In case (2) we do not need to wait. Add output variable to crypt_alloc_buffer() to distinguish between these cases. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] gfp_t: remaining bits of drivers/* Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-21 03:22:34 -04:00
dm crypt: use bio_add_page Fix possible max_phys_segments violation in cloned dm-crypt bio. In write operation dm-crypt needs to allocate new bio request and run crypto operation on this clone. Cloned request has always the same size, but number of physical segments can be increased and violate max_phys_segments restriction. This can lead to data corruption and serious hardware malfunction. This was observed when using XFS over dm-crypt and at least two HBA controller drivers (arcmsr, cciss) recently. Fix it by using bio_add_page() call (which tests for other restrictions too) instead of constructing own biovec. All versions of dm-crypt are affected by this bug. Cc: stable@kernel.org Cc: dm-crypt@saout.de Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-12-13 14:16:10 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: fix remove first_clone Get rid of first_clone in dm-crypt This gets rid of first_clone, which is not really needed. Apparently, cloned bios used to share their bvec some time way in the past - this is no longer the case. Contrarily, this even hurts us if we try to create a clone off first_clone after it has completed, and crypt_endio has destroyed its bvec. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:53 -07:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: fix call to clone_init Call clone_init early We need to call clone_init as early as possible - at least before call bio_put(clone) in any error path. Otherwise, the destructor will try to dereference bi_private, which may still be NULL. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:52 -07:00
dm crypt: avoid unnecessary wait when splitting bio Don't wait between submitting crypt requests for a bio unless we are short of memory. There are two situations when we must split an encrypted bio: 1) there are no free pages; 2) the new bio would violate underlying device restrictions (e.g. max hw segments). In case (2) we do not need to wait. Add output variable to crypt_alloc_buffer() to distinguish between these cases. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
[PATCH] dm crypt: use private biosets In the low memory situation dm-crypt needs to use a private mempool of bios to avoid blocking. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:40 -07:00
dm crypt: use smaller bvecs in clones Allocate smaller clones With the previous dm-crypt fixes, there is no need for the clone bios to have the same bvec size as the original - we just need to make them big enough for the remaining number of pages. The only requirement is that we clear the "out" index in convert_context, so that crypt_convert starts storing data at the right position within the clone bio. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:54 -07:00
dm crypt: use bio_add_page Fix possible max_phys_segments violation in cloned dm-crypt bio. In write operation dm-crypt needs to allocate new bio request and run crypto operation on this clone. Cloned request has always the same size, but number of physical segments can be increased and violate max_phys_segments restriction. This can lead to data corruption and serious hardware malfunction. This was observed when using XFS over dm-crypt and at least two HBA controller drivers (arcmsr, cciss) recently. Fix it by using bio_add_page() call (which tests for other restrictions too) instead of constructing own biovec. All versions of dm-crypt are affected by this bug. Cc: stable@kernel.org Cc: dm-crypt@saout.de Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-12-13 14:16:10 +00:00
dm crypt: avoid unnecessary wait when splitting bio Don't wait between submitting crypt requests for a bio unless we are short of memory. There are two situations when we must split an encrypted bio: 1) there are no free pages; 2) the new bio would violate underlying device restrictions (e.g. max hw segments). In case (2) we do not need to wait. Add output variable to crypt_alloc_buffer() to distinguish between these cases. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: avoid unnecessary wait when splitting bio Don't wait between submitting crypt requests for a bio unless we are short of memory. There are two situations when we must split an encrypted bio: 1) there are no free pages; 2) the new bio would violate underlying device restrictions (e.g. max hw segments). In case (2) we do not need to wait. Add output variable to crypt_alloc_buffer() to distinguish between these cases. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: fix mempool deadlock This patch fixes a possible deadlock in dm-crypt's mempool use. Currently, dm-crypt reserves a mempool of MIN_BIO_PAGES reserved pages. It allocates first MIN_BIO_PAGES with non-failing allocation (the allocation cannot fail and waits until the mempool is refilled). Further pages are allocated with different gfp flags that allow failing. Because allocations may be done in parallel, this code can deadlock. Example: There are two processes, each tries to allocate MIN_BIO_PAGES and the processes run simultaneously. It may end up in a situation where each process allocates (MIN_BIO_PAGES / 2) pages. The mempool is exhausted. Each process waits for more pages to be freed to the mempool, which never happens. To avoid this deadlock scenario, this patch changes the code so that only the first page is allocated with non-failing gfp mask. Allocation of further pages may fail. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: fix mempool deadlock This patch fixes a possible deadlock in dm-crypt's mempool use. Currently, dm-crypt reserves a mempool of MIN_BIO_PAGES reserved pages. It allocates first MIN_BIO_PAGES with non-failing allocation (the allocation cannot fail and waits until the mempool is refilled). Further pages are allocated with different gfp flags that allow failing. Because allocations may be done in parallel, this code can deadlock. Example: There are two processes, each tries to allocate MIN_BIO_PAGES and the processes run simultaneously. It may end up in a situation where each process allocates (MIN_BIO_PAGES / 2) pages. The mempool is exhausted. Each process waits for more pages to be freed to the mempool, which never happens. To avoid this deadlock scenario, this patch changes the code so that only the first page is allocated with non-failing gfp mask. Allocation of further pages may fail. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: use bio_add_page Fix possible max_phys_segments violation in cloned dm-crypt bio. In write operation dm-crypt needs to allocate new bio request and run crypto operation on this clone. Cloned request has always the same size, but number of physical segments can be increased and violate max_phys_segments restriction. This can lead to data corruption and serious hardware malfunction. This was observed when using XFS over dm-crypt and at least two HBA controller drivers (arcmsr, cciss) recently. Fix it by using bio_add_page() call (which tests for other restrictions too) instead of constructing own biovec. All versions of dm-crypt are affected by this bug. Cc: stable@kernel.org Cc: dm-crypt@saout.de Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-12-13 14:16:10 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: use bio_add_page Fix possible max_phys_segments violation in cloned dm-crypt bio. In write operation dm-crypt needs to allocate new bio request and run crypto operation on this clone. Cloned request has always the same size, but number of physical segments can be increased and violate max_phys_segments restriction. This can lead to data corruption and serious hardware malfunction. This was observed when using XFS over dm-crypt and at least two HBA controller drivers (arcmsr, cciss) recently. Fix it by using bio_add_page() call (which tests for other restrictions too) instead of constructing own biovec. All versions of dm-crypt are affected by this bug. Cc: stable@kernel.org Cc: dm-crypt@saout.de Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-12-13 14:16:10 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Fix memory leak in dm-crypt dm-crypt used the ->bi_size member in the bio endio handling to free the appropriate pages, but it frees all of it from both call paths. With the ->bi_end_io() changes, ->bi_size was always 0 since we don't do partial completes. This caused dm-crypt to leak memory. Fix this by removing the size argument from crypt_free_buffer_pages(). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 13:48:46 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Fix memory leak in dm-crypt dm-crypt used the ->bi_size member in the bio endio handling to free the appropriate pages, but it frees all of it from both call paths. With the ->bi_end_io() changes, ->bi_size was always 0 since we don't do partial completes. This caused dm-crypt to leak memory. Fix this by removing the size argument from crypt_free_buffer_pages(). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 13:48:46 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: Convert some code to bio_for_each_segment_all() More prep work for immutable bvecs: A few places in the code were either open coding or using the wrong version - fix. After we introduce the bvec iter, it'll no longer be possible to modify the biovec through bio_for_each_segment_all() - it doesn't increment a pointer to the current bvec, you pass in a struct bio_vec (not a pointer) which is updated with what the current biovec would be (taking into account bi_bvec_done and bi_size). So because of that it's more worthwhile to be consistent about bio_for_each_segment()/bio_for_each_segment_all() usage. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: NeilBrown <neilb@suse.de> CC: Alasdair Kergon <agk@redhat.com> CC: dm-devel@redhat.com CC: Alexander Viro <viro@zeniv.linux.org.uk>
2012-09-05 15:22:02 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: tidy crypt alloc Factor out crypt io allocation code. Later patches will call it from another place. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:03 +01:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: tidy crypt alloc Factor out crypt io allocation code. Later patches will call it from another place. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:03 +01:00
dm crypt: fix async split When writing io, dm-crypt has to allocate a new cloned bio and encrypt the data into newly-allocated pages attached to this bio. In rare cases, because of hw restrictions (e.g. physical segment limit) or memory pressure, sometimes more than one cloned bio has to be used, each processing a different fragment of the original. Currently there is one waitqueue which waits for one fragment to finish and continues processing the next fragment. But when using asynchronous crypto this doesn't work, because several fragments may be processed asynchronously or in parallel and there is only one crypt context that cannot be shared between the bio fragments. The result may be corruption of the data contained in the encrypted bio. The patch fixes this by allocating new dm_crypt_io structs (with new crypto contexts) and running them independently. The fragments contains a pointer to the base dm_crypt_io struct to handle reference counting, so the base one is properly deallocated after all the fragments are finished. In a low memory situation, this only uses one additional object from the mempool. If the mempool is empty, the next allocation simple waits for previous fragments to complete. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:45:02 +01:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: tidy crypt alloc Factor out crypt io allocation code. Later patches will call it from another place. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:03 +01:00
dm crypt: tidy inc pending Move io pending to one place. No functional change, usefull to simplify debugging. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:02 +01:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: tidy inc pending Move io pending to one place. No functional change, usefull to simplify debugging. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:02 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: fix async split When writing io, dm-crypt has to allocate a new cloned bio and encrypt the data into newly-allocated pages attached to this bio. In rare cases, because of hw restrictions (e.g. physical segment limit) or memory pressure, sometimes more than one cloned bio has to be used, each processing a different fragment of the original. Currently there is one waitqueue which waits for one fragment to finish and continues processing the next fragment. But when using asynchronous crypto this doesn't work, because several fragments may be processed asynchronously or in parallel and there is only one crypt context that cannot be shared between the bio fragments. The result may be corruption of the data contained in the encrypted bio. The patch fixes this by allocating new dm_crypt_io structs (with new crypto contexts) and running them independently. The fragments contains a pointer to the base dm_crypt_io struct to handle reference counting, so the base one is properly deallocated after all the fragments are finished. In a low memory situation, this only uses one additional object from the mempool. If the mempool is empty, the next allocation simple waits for previous fragments to complete. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:45:02 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: move error setting outside crypt_dec_pending Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:43 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: wait for endio to complete before destruction The following oops has been reported when dm-crypt runs over a loop device. ... [ 70.381058] Process loop0 (pid: 4268, ti=cf3b2000 task=cf1cc1f0 task.ti=cf3b2000) ... [ 70.381058] Call Trace: [ 70.381058] [<d0d76601>] ? crypt_dec_pending+0x5e/0x62 [dm_crypt] [ 70.381058] [<d0d767b8>] ? crypt_endio+0xa2/0xaa [dm_crypt] [ 70.381058] [<d0d76716>] ? crypt_endio+0x0/0xaa [dm_crypt] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<d0806530>] ? dec_pending+0x224/0x23b [dm_mod] [ 70.381058] [<d08066e4>] ? clone_endio+0x79/0xa4 [dm_mod] [ 70.381058] [<d080666b>] ? clone_endio+0x0/0xa4 [dm_mod] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<c02bad86>] ? loop_thread+0x380/0x3b7 [ 70.381058] [<c02ba8a1>] ? do_lo_send_aops+0x0/0x165 [ 70.381058] [<c013754f>] ? autoremove_wake_function+0x0/0x33 [ 70.381058] [<c02baa06>] ? loop_thread+0x0/0x3b7 When a table is being replaced, it waits for I/O to complete before destroying the mempool, but the endio function doesn't call mempool_free() until after completing the bio. Fix it by swapping the order of those two operations. The same problem occurs in dm.c with md referenced after dec_pending. Again, we swap the order. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:36 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: wait for endio to complete before destruction The following oops has been reported when dm-crypt runs over a loop device. ... [ 70.381058] Process loop0 (pid: 4268, ti=cf3b2000 task=cf1cc1f0 task.ti=cf3b2000) ... [ 70.381058] Call Trace: [ 70.381058] [<d0d76601>] ? crypt_dec_pending+0x5e/0x62 [dm_crypt] [ 70.381058] [<d0d767b8>] ? crypt_endio+0xa2/0xaa [dm_crypt] [ 70.381058] [<d0d76716>] ? crypt_endio+0x0/0xaa [dm_crypt] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<d0806530>] ? dec_pending+0x224/0x23b [dm_mod] [ 70.381058] [<d08066e4>] ? clone_endio+0x79/0xa4 [dm_mod] [ 70.381058] [<d080666b>] ? clone_endio+0x0/0xa4 [dm_mod] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<c02bad86>] ? loop_thread+0x380/0x3b7 [ 70.381058] [<c02ba8a1>] ? do_lo_send_aops+0x0/0x165 [ 70.381058] [<c013754f>] ? autoremove_wake_function+0x0/0x33 [ 70.381058] [<c02baa06>] ? loop_thread+0x0/0x3b7 When a table is being replaced, it waits for I/O to complete before destroying the mempool, but the endio function doesn't call mempool_free() until after completing the bio. Fix it by swapping the order of those two operations. The same problem occurs in dm.c with md referenced after dec_pending. Again, we swap the order. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:36 +00:00
dm crypt: fix async split When writing io, dm-crypt has to allocate a new cloned bio and encrypt the data into newly-allocated pages attached to this bio. In rare cases, because of hw restrictions (e.g. physical segment limit) or memory pressure, sometimes more than one cloned bio has to be used, each processing a different fragment of the original. Currently there is one waitqueue which waits for one fragment to finish and continues processing the next fragment. But when using asynchronous crypto this doesn't work, because several fragments may be processed asynchronously or in parallel and there is only one crypt context that cannot be shared between the bio fragments. The result may be corruption of the data contained in the encrypted bio. The patch fixes this by allocating new dm_crypt_io structs (with new crypto contexts) and running them independently. The fragments contains a pointer to the base dm_crypt_io struct to handle reference counting, so the base one is properly deallocated after all the fragments are finished. In a low memory situation, this only uses one additional object from the mempool. If the mempool is empty, the next allocation simple waits for previous fragments to complete. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:45:02 +01:00
dm crypt: wait for endio to complete before destruction The following oops has been reported when dm-crypt runs over a loop device. ... [ 70.381058] Process loop0 (pid: 4268, ti=cf3b2000 task=cf1cc1f0 task.ti=cf3b2000) ... [ 70.381058] Call Trace: [ 70.381058] [<d0d76601>] ? crypt_dec_pending+0x5e/0x62 [dm_crypt] [ 70.381058] [<d0d767b8>] ? crypt_endio+0xa2/0xaa [dm_crypt] [ 70.381058] [<d0d76716>] ? crypt_endio+0x0/0xaa [dm_crypt] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<d0806530>] ? dec_pending+0x224/0x23b [dm_mod] [ 70.381058] [<d08066e4>] ? clone_endio+0x79/0xa4 [dm_mod] [ 70.381058] [<d080666b>] ? clone_endio+0x0/0xa4 [dm_mod] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<c02bad86>] ? loop_thread+0x380/0x3b7 [ 70.381058] [<c02ba8a1>] ? do_lo_send_aops+0x0/0x165 [ 70.381058] [<c013754f>] ? autoremove_wake_function+0x0/0x33 [ 70.381058] [<c02baa06>] ? loop_thread+0x0/0x3b7 When a table is being replaced, it waits for I/O to complete before destroying the mempool, but the endio function doesn't call mempool_free() until after completing the bio. Fix it by swapping the order of those two operations. The same problem occurs in dm.c with md referenced after dec_pending. Again, we swap the order. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:36 +00:00
dm crypt: fix async split When writing io, dm-crypt has to allocate a new cloned bio and encrypt the data into newly-allocated pages attached to this bio. In rare cases, because of hw restrictions (e.g. physical segment limit) or memory pressure, sometimes more than one cloned bio has to be used, each processing a different fragment of the original. Currently there is one waitqueue which waits for one fragment to finish and continues processing the next fragment. But when using asynchronous crypto this doesn't work, because several fragments may be processed asynchronously or in parallel and there is only one crypt context that cannot be shared between the bio fragments. The result may be corruption of the data contained in the encrypted bio. The patch fixes this by allocating new dm_crypt_io structs (with new crypto contexts) and running them independently. The fragments contains a pointer to the base dm_crypt_io struct to handle reference counting, so the base one is properly deallocated after all the fragments are finished. In a low memory situation, this only uses one additional object from the mempool. If the mempool is empty, the next allocation simple waits for previous fragments to complete. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:45:02 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm crypt: move io to workqueue This patch is designed to help dm-crypt comply with the new constraints imposed by the following patch in -mm: md-dm-reduce-stack-usage-with-stacked-block-devices.patch Under low memory the existing implementation relies upon waiting for I/O submitted recursively to generic_make_request() completing before the original generic_make_request() call can return. This patch moves the I/O submission to a workqueue so the original generic_make_request() can return immediately. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:39 -07:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Drop 'size' argument from bio_endio and bi_end_io As bi_end_io is only called once when the reqeust is complete, the 'size' argument is now redundant. Remove it. Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either. While we are at it, change bi_end_io to return void. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-27 12:47:43 +02:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm: use kmem_cache macro Use new KMEM_CACHE() macro and make the newly-exposed structure names more meaningful. Also remove some superfluous casts and inlines (let a modern compiler be the judge). Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 17:26:32 +01:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: tidy crypt_endio Simplify crypt_endio function. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:46 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: fix write endio Fix BIO_UPTODATE test for write io. Cc: stable@kernel.org Cc: dm-crypt@saout.de Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-12-13 14:15:51 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
Drop 'size' argument from bio_endio and bi_end_io As bi_end_io is only called once when the reqeust is complete, the 'size' argument is now redundant. Remove it. Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either. While we are at it, change bi_end_io to return void. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-27 12:47:43 +02:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: tidy crypt_endio Simplify crypt_endio function. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:46 +00:00
Fix memory leak in dm-crypt dm-crypt used the ->bi_size member in the bio endio handling to free the appropriate pages, but it frees all of it from both call paths. With the ->bi_end_io() changes, ->bi_size was always 0 since we don't do partial completes. This caused dm-crypt to leak memory. Fix this by removing the size argument from crypt_free_buffer_pages(). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 13:48:46 +02:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: tidy crypt_endio Simplify crypt_endio function. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:46 +00:00
dm crypt: move error setting outside crypt_dec_pending Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:43 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm: use kmem_cache macro Use new KMEM_CACHE() macro and make the newly-exposed structure names more meaningful. Also remove some superfluous casts and inlines (let a modern compiler be the judge). Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 17:26:32 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
[PATCH] dm crypt: restructure write processing Restructure the dm-crypt write processing in preparation for workqueue changes in the next patches. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:38 -07:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
block: Add bio_clone_bioset(), bio_clone_kmalloc() Previously, there was bio_clone() but it only allocated from the fs bio set; as a result various users were open coding it and using __bio_clone(). This changes bio_clone() to become bio_clone_bioset(), and then we add bio_clone() and bio_clone_kmalloc() as wrappers around it, making use of the functionality the last patch adedd. This will also help in a later patch changing how bio cloning works. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: NeilBrown <neilb@suse.de> CC: Alasdair Kergon <agk@redhat.com> CC: Boaz Harrosh <bharrosh@panasas.com> CC: Jeff Garzik <jeff@garzik.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-06 15:35:02 -07:00
block: remove per-queue plugging Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: store sector mapping in dm_crypt_io Add sector into dm_crypt_io instead of using local variable. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:54 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
[PATCH] dm crypt: restructure write processing Restructure the dm-crypt write processing in preparation for workqueue changes in the next patches. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:38 -07:00
dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: adjust io processing functions Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:49 +00:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: adjust io processing functions Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:49 +00:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: adjust io processing functions Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:49 +00:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
dm crypt: move dec_pending on error into write_io_submit Make kcryptd_crypt_write_io_submit() responsible for decrementing the pending count after an error. Also fixes a bug in the async path that forgot to decrement it. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:06 +01:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
dm crypt: tidy io ref counting Make io reference counting more obvious. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:02 +00:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: remove inc_pending from write_io_submit Make the caller reponsible for incrementing the pending count before calling kcryptd_crypt_write_io_submit() in the non-async case to bring it into line with the async case. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:05 +01:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: adjust io processing functions Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:49 +00:00
dm crypt: tidy write loop pending Move kcryptd_crypt_write_convert_loop inside kcryptd_crypt_write_convert. This change is needed for a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:04 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: fix async split When writing io, dm-crypt has to allocate a new cloned bio and encrypt the data into newly-allocated pages attached to this bio. In rare cases, because of hw restrictions (e.g. physical segment limit) or memory pressure, sometimes more than one cloned bio has to be used, each processing a different fragment of the original. Currently there is one waitqueue which waits for one fragment to finish and continues processing the next fragment. But when using asynchronous crypto this doesn't work, because several fragments may be processed asynchronously or in parallel and there is only one crypt context that cannot be shared between the bio fragments. The result may be corruption of the data contained in the encrypted bio. The patch fixes this by allocating new dm_crypt_io structs (with new crypto contexts) and running them independently. The fragments contains a pointer to the base dm_crypt_io struct to handle reference counting, so the base one is properly deallocated after all the fragments are finished. In a low memory situation, this only uses one additional object from the mempool. If the mempool is empty, the next allocation simple waits for previous fragments to complete. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:45:02 +01:00
dm crypt: tidy ctx pending Move the initialisation of ctx->pending into one place, at the start of crypt_convert(). Introduce crypt_finished to indicate whether or not the encryption is finished, for use in a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
dm crypt: avoid unnecessary wait when splitting bio Don't wait between submitting crypt requests for a bio unless we are short of memory. There are two situations when we must split an encrypted bio: 1) there are no free pages; 2) the new bio would violate underlying device restrictions (e.g. max hw segments). In case (2) we do not need to wait. Add output variable to crypt_alloc_buffer() to distinguish between these cases. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
dm crypt: tidy sector Prepare local sector variable (offset) for later patch. Do not update io->sector for still-running I/O. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:45:00 +01:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: tidy write loop pending Move kcryptd_crypt_write_convert_loop inside kcryptd_crypt_write_convert. This change is needed for a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:04 +01:00
dm crypt: tidy sector Prepare local sector variable (offset) for later patch. Do not update io->sector for still-running I/O. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:45:00 +01:00
dm crypt: tidy write loop pending Move kcryptd_crypt_write_convert_loop inside kcryptd_crypt_write_convert. This change is needed for a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:04 +01:00
[PATCH] dm crypt: restructure write processing Restructure the dm-crypt write processing in preparation for workqueue changes in the next patches. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:38 -07:00
dm crypt: avoid unnecessary wait when splitting bio Don't wait between submitting crypt requests for a bio unless we are short of memory. There are two situations when we must split an encrypted bio: 1) there are no free pages; 2) the new bio would violate underlying device restrictions (e.g. max hw segments). In case (2) we do not need to wait. Add output variable to crypt_alloc_buffer() to distinguish between these cases. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
[PATCH] dm crypt: move io to workqueue This patch is designed to help dm-crypt comply with the new constraints imposed by the following patch in -mm: md-dm-reduce-stack-usage-with-stacked-block-devices.patch Under low memory the existing implementation relies upon waiting for I/O submitted recursively to generic_make_request() completing before the original generic_make_request() call can return. This patch moves the I/O submission to a workqueue so the original generic_make_request() can return immediately. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:39 -07:00
dm crypt: move error setting outside crypt_dec_pending Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:43 +00:00
dm crypt: tidy write loop pending Move kcryptd_crypt_write_convert_loop inside kcryptd_crypt_write_convert. This change is needed for a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:04 +01:00
[PATCH] dm crypt: move io to workqueue This patch is designed to help dm-crypt comply with the new constraints imposed by the following patch in -mm: md-dm-reduce-stack-usage-with-stacked-block-devices.patch Under low memory the existing implementation relies upon waiting for I/O submitted recursively to generic_make_request() completing before the original generic_make_request() call can return. This patch moves the I/O submission to a workqueue so the original generic_make_request() can return immediately. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:39 -07:00
[PATCH] dm crypt: restructure write processing Restructure the dm-crypt write processing in preparation for workqueue changes in the next patches. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:38 -07:00
dm crypt: move convert_context inside dm_crypt_io Move convert_context inside dm_crypt_io. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:38 +00:00
[PATCH] dm crypt: restructure write processing Restructure the dm-crypt write processing in preparation for workqueue changes in the next patches. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:38 -07:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
dm crypt: tidy sector Prepare local sector variable (offset) for later patch. Do not update io->sector for still-running I/O. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:45:00 +01:00
[PATCH] dm crypt: restructure write processing Restructure the dm-crypt write processing in preparation for workqueue changes in the next patches. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:38 -07:00
dm crypt: fix async inc_pending The pending reference count must be incremented *before* the async work is queued to another thread, not after. Otherwise there's a race if the work completes and decrements the reference count before it gets incremented. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:07 +01:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: abstract crypt_write_done Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:57 +00:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: use smaller bvecs in clones Allocate smaller clones With the previous dm-crypt fixes, there is no need for the clone bios to have the same bvec size as the original - we just need to make them big enough for the remaining number of pages. The only requirement is that we clear the "out" index in convert_context, so that crypt_convert starts storing data at the right position within the clone bio. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:54 -07:00
dm crypt: tidy ctx pending Move the initialisation of ctx->pending into one place, at the start of crypt_convert(). Introduce crypt_finished to indicate whether or not the encryption is finished, for use in a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: tidy ctx pending Move the initialisation of ctx->pending into one place, at the start of crypt_convert(). Introduce crypt_finished to indicate whether or not the encryption is finished, for use in a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
dm crypt: move dec_pending on error into write_io_submit Make kcryptd_crypt_write_io_submit() responsible for decrementing the pending count after an error. Also fixes a bug in the async path that forgot to decrement it. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:06 +01:00
dm crypt: tidy write loop pending Move kcryptd_crypt_write_convert_loop inside kcryptd_crypt_write_convert. This change is needed for a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:04 +01:00
dm crypt: tidy sector Prepare local sector variable (offset) for later patch. Do not update io->sector for still-running I/O. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:45:00 +01:00
dm crypt: fix async inc_pending The pending reference count must be incremented *before* the async work is queued to another thread, not after. Otherwise there's a race if the work completes and decrements the reference count before it gets incremented. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:07 +01:00
[PATCH] dm crypt: restructure write processing Restructure the dm-crypt write processing in preparation for workqueue changes in the next patches. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:38 -07:00
dm crypt: avoid unnecessary wait when splitting bio Don't wait between submitting crypt requests for a bio unless we are short of memory. There are two situations when we must split an encrypted bio: 1) there are no free pages; 2) the new bio would violate underlying device restrictions (e.g. max hw segments). In case (2) we do not need to wait. Add output variable to crypt_alloc_buffer() to distinguish between these cases. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
Fix congestion_wait() sync/async vs read/write confusion Commit 1faa16d22877f4839bd433547d770c676d1d964c accidentally broke the bdi congestion wait queue logic, causing us to wait on congestion for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-09 14:52:32 +02:00
dm crypt: avoid unnecessary wait when splitting bio Don't wait between submitting crypt requests for a bio unless we are short of memory. There are two situations when we must split an encrypted bio: 1) there are no free pages; 2) the new bio would violate underlying device restrictions (e.g. max hw segments). In case (2) we do not need to wait. Add output variable to crypt_alloc_buffer() to distinguish between these cases. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:08 +01:00
dm crypt: fix async split When writing io, dm-crypt has to allocate a new cloned bio and encrypt the data into newly-allocated pages attached to this bio. In rare cases, because of hw restrictions (e.g. physical segment limit) or memory pressure, sometimes more than one cloned bio has to be used, each processing a different fragment of the original. Currently there is one waitqueue which waits for one fragment to finish and continues processing the next fragment. But when using asynchronous crypto this doesn't work, because several fragments may be processed asynchronously or in parallel and there is only one crypt context that cannot be shared between the bio fragments. The result may be corruption of the data contained in the encrypted bio. The patch fixes this by allocating new dm_crypt_io structs (with new crypto contexts) and running them independently. The fragments contains a pointer to the base dm_crypt_io struct to handle reference counting, so the base one is properly deallocated after all the fragments are finished. In a low memory situation, this only uses one additional object from the mempool. If the mempool is empty, the next allocation simple waits for previous fragments to complete. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:45:02 +01:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: fix async split When writing io, dm-crypt has to allocate a new cloned bio and encrypt the data into newly-allocated pages attached to this bio. In rare cases, because of hw restrictions (e.g. physical segment limit) or memory pressure, sometimes more than one cloned bio has to be used, each processing a different fragment of the original. Currently there is one waitqueue which waits for one fragment to finish and continues processing the next fragment. But when using asynchronous crypto this doesn't work, because several fragments may be processed asynchronously or in parallel and there is only one crypt context that cannot be shared between the bio fragments. The result may be corruption of the data contained in the encrypted bio. The patch fixes this by allocating new dm_crypt_io structs (with new crypto contexts) and running them independently. The fragments contains a pointer to the base dm_crypt_io struct to handle reference counting, so the base one is properly deallocated after all the fragments are finished. In a low memory situation, this only uses one additional object from the mempool. If the mempool is empty, the next allocation simple waits for previous fragments to complete. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:45:02 +01:00
[PATCH] dm crypt: restructure write processing Restructure the dm-crypt write processing in preparation for workqueue changes in the next patches. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:38 -07:00
dm crypt: tidy io ref counting Make io reference counting more obvious. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:02 +00:00
dm crypt: introduce crypt_write_io_loop Introduce crypt_write_io_loop(). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:59 +00:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: move error setting outside crypt_dec_pending Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:43 +00:00
dm crypt: adjust io processing functions Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:49 +00:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: move error setting outside crypt_dec_pending Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:43 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: tidy inc pending Move io pending to one place. No functional change, usefull to simplify debugging. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10 13:37:02 +01:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: move convert_context inside dm_crypt_io Move convert_context inside dm_crypt_io. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:38 +00:00
dm crypt: store sector mapping in dm_crypt_io Add sector into dm_crypt_io instead of using local variable. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:54 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: move error setting outside crypt_dec_pending Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:43 +00:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: move error setting outside crypt_dec_pending Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:43 +00:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:54 +00:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: fix kcryptd_async_done parameter In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:33 +00:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: rename pending field There are two dm crypt structures that have a field called "pending". This patch renames them to "cc_pending" and "io_pending" to reduce confusion and ease searching the code. Also remove unnecessary initialisation of r in crypt_convert_block(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:04 +01:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: add missing error handling Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:22 +01:00
dm crypt: prepare async callback fn dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:12 +00:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: use kmem_cache macro Use new KMEM_CACHE() macro and make the newly-exposed structure names more meaningful. Also remove some superfluous casts and inlines (let a modern compiler be the judge). Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 17:26:32 +01:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: adjust io processing functions Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:49 +00:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: move queue functions Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:10:52 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm crypt: restructure for workqueue change Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: replace simple_strtoul Replace obsolete simple_strtoul() with kstrtou8/kstrtouint. Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:07:59 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: wipe keys string immediately after key is set Always wipe the original copy of the key after processing it in crypt_set_key(). Signed-off-by: Milan Broz <mbroz@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24 13:54:27 +00:00
dm crypt: set key size early Simplify key size verification (hexadecimal string) and set key size early in constructor. (Patch required by later changes.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:49 +00:00
dm crypt: wipe keys string immediately after key is set Always wipe the original copy of the key after processing it in crypt_set_key(). Signed-off-by: Milan Broz <mbroz@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24 13:54:27 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: set key size early Simplify key size verification (hexadecimal string) and set key size early in constructor. (Patch required by later changes.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:49 +00:00
dm crypt: wipe keys string immediately after key is set Always wipe the original copy of the key after processing it in crypt_set_key(). Signed-off-by: Milan Broz <mbroz@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24 13:54:27 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: set key size early Simplify key size verification (hexadecimal string) and set key size early in constructor. (Patch required by later changes.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:49 +00:00
dm crypt: wipe keys string immediately after key is set Always wipe the original copy of the key after processing it in crypt_set_key(). Signed-off-by: Milan Broz <mbroz@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24 13:54:27 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: wipe keys string immediately after key is set Always wipe the original copy of the key after processing it in crypt_set_key(). Signed-off-by: Milan Broz <mbroz@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24 13:54:27 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: simplify compatible table output Rename cc->cipher_mode to cc->cipher_string and store the whole of the cipher information so it can easily be printed when processing the DM_DEV_STATUS ioctl. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:52 +00:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm: reject trailing characters in sccanf input Device mapper uses sscanf to convert arguments to numbers. The problem is that the way we use it ignores additional unmatched characters in the scanned string. For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number, but also it will match number with some garbage appended, like "123abc". As a result, device mapper accepts garbage after some numbers. For example the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"' will pass without an error. This patch fixes all sscanf uses in device mapper. It appends "%c" with a pointer to a dummy character variable to every sscanf statement. The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds only if string is a null-terminated number (optionally preceded by some whitespace characters). If there is some character appended after the number, sscanf matches "%c", writes the character to the dummy variable and returns 2. We check the return value for 1 and consequently reject numbers with some garbage appended. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:26 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify compatible table output Rename cc->cipher_mode to cc->cipher_string and store the whole of the cipher information so it can easily be printed when processing the DM_DEV_STATUS ioctl. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:52 +00:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm: reject trailing characters in sccanf input Device mapper uses sscanf to convert arguments to numbers. The problem is that the way we use it ignores additional unmatched characters in the scanned string. For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number, but also it will match number with some garbage appended, like "123abc". As a result, device mapper accepts garbage after some numbers. For example the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"' will pass without an error. This patch fixes all sscanf uses in device mapper. It appends "%c" with a pointer to a dummy character variable to every sscanf statement. The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds only if string is a null-terminated number (optionally preceded by some whitespace characters). If there is some character appended after the number, sscanf matches "%c", writes the character to the dummy variable and returns 2. We check the return value for 1 and consequently reject numbers with some garbage appended. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:26 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the <key> string is divided into several <keycount> sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:54 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: simplify compatible table output Rename cc->cipher_mode to cc->cipher_string and store the whole of the cipher information so it can easily be printed when processing the DM_DEV_STATUS ioctl. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:52 +00:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[BLOCK] dm-crypt: Use block ciphers where applicable This patch converts dm-crypt to use the new block cipher type where applicable. It also changes simple cipher operations to use the new encrypt_one/decrypt_one interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-22 20:29:17 +10:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: move cipher data out of per_cpu struct Move static dm-crypt cipher data out of per-cpu structure. Cipher information is static, so it does not have to be in a per-cpu structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add plain64 iv The default plain IV is 32-bit only. This plain64 IV provides a compatible mode for encrypted devices bigger than 4TB. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:25 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[BLOCK] dm-crypt: benbi IV, big endian narrow block count for LRW-32-AES LRW-32-AES needs a certain IV. This IV should be provided dm-crypt. The block cipher mode could, in principle generate the correct IV from the plain IV, but I think that it is cleaner to supply the right IV directly. The sector -> narrow block calculation uses a shift for performance reasons. This shift is computed in .ctr and stored in cc->iv_gen_private (as a void *). Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-03 08:56:39 +10:00
dm crypt: add null iv Add a new IV generation method 'null' to read old filesystem images created with SuSE's loop_fish2 module. Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Acked-By: Christophe Saout <christophe@saout.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 02:32:55 -07:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> CC: Max Vozeler <max@hinterhof.net>
2011-01-13 19:59:55 +00:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: properly handle extra key string in initialization Some encryption modes use extra keys (e.g. loopAES has IV seed) which are not used in block cipher initialization but are part of key string in table constructor. This patch adds an additional field which describes the length of the extra key(s) and substracts it before real key encryption setting. The key_size always includes the size, in bytes, of the key provided in mapping table. The key_parts describes how many parts (usually keys) are contained in the whole key buffer. And key_extra_size contains size in bytes of additional keys part (this number of bytes must be subtracted because it is processed by the IV generator). | K1 | K2 | .... | K64 | Kiv | |----------- key_size ----------------- | | |-key_extra_size-| | [64 keys] | [1 key] | => key_parts = 65 Example where key string contains main key K, whitening key Kw and IV seed Kiv: | K | Kiv | Kw | |--------------- key_size --------------| | |-----key_extra_size------| | [1 key] | [1 key] | [1 key] | => key_parts = 3 Because key_extra_size is calculated during IV mode setting, key initialization is moved after this step. For now, this change has no effect to supported modes (thanks to ilog2 rounding) but it is required by the following patch. Also, fix a sparse warning in crypt_iv_lmk_one(). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:03 +01:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: separate essiv allocation from initialisation This patch separates the construction of IV from its initialisation. (For ESSIV it is a hash calculation based on volume key.) Constructor code now preallocates hash tfm and salt array and saves it in a private IV structure. The next patch requires this to reinitialise the wiped IV without reallocating memory when resuming a suspended device. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:56 +00:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm: reject trailing characters in sccanf input Device mapper uses sscanf to convert arguments to numbers. The problem is that the way we use it ignores additional unmatched characters in the scanned string. For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number, but also it will match number with some garbage appended, like "123abc". As a result, device mapper accepts garbage after some numbers. For example the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"' will pass without an error. This patch fixes all sscanf uses in device mapper. It appends "%c" with a pointer to a dummy character variable to every sscanf statement. The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds only if string is a null-terminated number (optionally preceded by some whitespace characters). If there is some character appended after the number, sscanf matches "%c", writes the character to the dummy variable and returns 2. We check the return value for 1 and consequently reject numbers with some garbage appended. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:26 +01:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: set key size early Simplify key size verification (hexadecimal string) and set key size early in constructor. (Patch required by later changes.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:49 +00:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
[PATCH] mempool: use mempool_create_slab_pool() Modify well over a dozen mempool users to call mempool_create_slab_pool() rather than calling mempool_create() with extra arguments, saving about 30 lines of code and increasing readability. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 01:37:50 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: use async crypto dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:14 +00:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: add async request mempool dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:07 +00:00
[PATCH] mempool: use common mempool page allocator Convert two mempool users that currently use their own mempool-backed page allocators to use the generic mempool page allocator. Also included are 2 trivial whitespace fixes. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 01:37:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
bio: allow individual slabs in the bio_set Instead of having a global bio slab cache, add a reference to one in each bio_set that is created. This allows for personalized slabs in each bio_set, so that they can have bios of different sizes. This means we can personalize the bios we return. File systems may want to embed the bio inside another structure, to avoid allocation more items (and stuffing them in ->bi_private) after the get a bio. Or we may want to embed a number of bio_vecs directly at the end of a bio, to avoid doing two allocations to return a bio. This is now possible. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-10 15:35:05 +01:00
[PATCH] dm crypt: use private biosets In the low memory situation dm-crypt needs to use a private mempool of bios to avoid blocking. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:40 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
[PATCH] dm crypt: use private biosets In the low memory situation dm-crypt needs to use a private mempool of bios to avoid blocking. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:40 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm: reject trailing characters in sccanf input Device mapper uses sscanf to convert arguments to numbers. The problem is that the way we use it ignores additional unmatched characters in the scanned string. For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number, but also it will match number with some garbage appended, like "123abc". As a result, device mapper accepts garbage after some numbers. For example the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"' will pass without an error. This patch fixes all sscanf uses in device mapper. It appends "%c" with a pointer to a dummy character variable to every sscanf statement. The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds only if string is a null-terminated number (optionally preceded by some whitespace characters). If there is some character appended after the number, sscanf matches "%c", writes the character to the dummy variable and returns 2. We check the return value for 1 and consequently reject numbers with some garbage appended. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:26 +01:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm: remove SECTOR_FORMAT We don't know what type sector_t has. Sometimes it's unsigned long, sometimes it's unsigned long long. For example on ppc64 it's unsigned long with CONFIG_LBD=n and on x86_64 it's unsigned long long with CONFIG_LBD=n. The way to handle all of this is to always use unsigned long long and to always typecast the sector_t when printing it. Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 01:17:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm: reject trailing characters in sccanf input Device mapper uses sscanf to convert arguments to numbers. The problem is that the way we use it ignores additional unmatched characters in the scanned string. For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number, but also it will match number with some garbage appended, like "123abc". As a result, device mapper accepts garbage after some numbers. For example the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"' will pass without an error. This patch fixes all sscanf uses in device mapper. It appends "%c" with a pointer to a dummy character variable to every sscanf statement. The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds only if string is a null-terminated number (optionally preceded by some whitespace characters). If there is some character appended after the number, sscanf matches "%c", writes the character to the dummy variable and returns 2. We check the return value for 1 and consequently reject numbers with some garbage appended. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:26 +01:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm: remove SECTOR_FORMAT We don't know what type sector_t has. Sometimes it's unsigned long, sometimes it's unsigned long long. For example on ppc64 it's unsigned long with CONFIG_LBD=n and on x86_64 it's unsigned long long with CONFIG_LBD=n. The way to handle all of this is to always use unsigned long long and to always typecast the sector_t when printing it. Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 01:17:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm: rename request variables to bios Use 'bio' in the name of variables and functions that deal with bios rather than 'request' to avoid confusion with the normal block layer use of 'request'. No functional changes. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:47 +00:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm: stop using WQ_NON_REENTRANT dbf2576e37 ("workqueue: make all workqueues non-reentrant") made WQ_NON_REENTRANT no-op and the flag is going away. Remove its usages. This patch doesn't introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2013-07-30 08:40:21 -04:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm: stop using WQ_NON_REENTRANT dbf2576e37 ("workqueue: make all workqueues non-reentrant") made WQ_NON_REENTRANT no-op and the flag is going away. Remove its usages. This patch doesn't introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2013-07-30 08:40:21 -04:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: use per device singlethread workqueues Use a separate single-threaded workqueue for each crypt device instead of one global workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:57 +01:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
dm crypt: use per device singlethread workqueues Use a separate single-threaded workqueue for each crypt device instead of one global workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:57 +01:00
dm: rename request variables to bios Use 'bio' in the name of variables and functions that deal with bios rather than 'request' to avoid confusion with the normal block layer use of 'request'. No functional changes. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:47 +00:00
dm: use bool bitfields in struct dm_target Use boolean bit fields for flags in struct dm_target. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:08 +01:00
dm crypt: always disable discard_zeroes_data If optional discard support in dm-crypt is enabled, discards requests bypass the crypt queue and blocks of the underlying device are discarded. For the read path, discarded blocks are handled the same as normal ciphertext blocks, thus decrypted. So if the underlying device announces discarded regions return zeroes, dm-crypt must disable this flag because after decryption there is just random noise instead of zeroes. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-09-25 23:26:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_config destruction logic Use just one label and reuse common destructor for crypt target. Parse remaining argv arguments in logic order. Also do not ignore error values from IV init and set key functions. No functional change in this patch except changed return codes based on above. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:06 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: remove map_info This patch removes map_info from bio-based device mapper targets. map_info is still used for request-based targets. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-21 20:23:41 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: use kmem_cache macro Use new KMEM_CACHE() macro and make the newly-exposed structure names more meaningful. Also remove some superfluous casts and inlines (let a modern compiler be the judge). Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 17:26:32 +01:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: support flush Flush support for dm-crypt target. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:23 +01:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm crypt: support flush Flush support for dm-crypt target. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:23 +01:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm crypt: support flush Flush support for dm-crypt target. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:23 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: store crypt_config instead of dm_target struct Store the crypt_config struct pointer directly in struct dm_crypt_io instead of the dm_target struct pointer. Target information is never used - only target->private is referenced, thus we can change it to point directly to struct crypt_config. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:05 +01:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:53 +00:00
dm crypt: add post processing queue Add post-processing queue (per crypt device) for read operations. Current implementation uses only one queue for all operations and this can lead to starvation caused by many requests waiting for memory allocation. But the needed memory-releasing operation is queued after these requests (in the same queue). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:58 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm: map and endio symbolic return codes Update existing targets to use the new symbols for return values from target map and end_io functions. There is no effect on behaviour. Test results: Done build test without errors. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 02:41:06 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: fix truncated status strings Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:44 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify crypt_ctr Allocate cipher strings indpendently of struct crypt_config and move cipher parsing and allocation into a separate function to prepare for supporting the cryptoapi format e.g. "xts(aes)". No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:07 +01:00
dm: fix truncated status strings Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:44 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: simplify compatible table output Rename cc->cipher_mode to cc->cipher_string and store the whole of the cipher information so it can easily be printed when processing the DM_DEV_STATUS ioctl. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:52 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: fix truncated status strings Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:44 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm: remove SECTOR_FORMAT We don't know what type sector_t has. Sometimes it's unsigned long, sometimes it's unsigned long long. For example on ppc64 it's unsigned long with CONFIG_LBD=n and on x86_64 it's unsigned long long with CONFIG_LBD=n. The way to handle all of this is to always use unsigned long long and to always typecast the sector_t when printing it. Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 01:17:48 -08:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
dm: rename request variables to bios Use 'bio' in the name of variables and functions that deal with bios rather than 'request' to avoid confusion with the normal block layer use of 'request'. No functional changes. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:47 +00:00
dm crypt: optionally support discard requests Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:08 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: make wipe message also wipe essiv key The "wipe key" message is used to wipe the volume key from memory temporarily, for example when suspending to RAM. But the initialisation vector in ESSIV mode is calculated from the hashed volume key, so the wipe message should wipe this IV key too and reinitialise it when the volume key is reinstated. This patch adds an IV wipe method called from a wipe message callback. ESSIV is then reinitialised using the init function added by the last patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:57 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm table: share target argument parsing functions Move multipath target argument parsing code into dm-table so other targets can share it. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:04 +01:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm table: share target argument parsing functions Move multipath target argument parsing code into dm-table so other targets can share it. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:04 +01:00
dm crypt: make wipe message also wipe essiv key The "wipe key" message is used to wipe the volume key from memory temporarily, for example when suspending to RAM. But the initialisation vector in ESSIV mode is calculated from the hashed volume key, so the wipe message should wipe this IV key too and reinitialise it when the volume key is reinstated. This patch adds an IV wipe method called from a wipe message callback. ESSIV is then reinitialised using the init function added by the last patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:57 +00:00
dm table: share target argument parsing functions Move multipath target argument parsing code into dm-table so other targets can share it. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02 12:32:04 +01:00
dm crypt: make wipe message also wipe essiv key The "wipe key" message is used to wipe the volume key from memory temporarily, for example when suspending to RAM. But the initialisation vector in ESSIV mode is calculated from the hashed volume key, so the wipe message should wipe this IV key too and reinitialise it when the volume key is reinstated. This patch adds an IV wipe method called from a wipe message callback. ESSIV is then reinitialised using the init function added by the last patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:57 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: make wipe message also wipe essiv key The "wipe key" message is used to wipe the volume key from memory temporarily, for example when suspending to RAM. But the initialisation vector in ESSIV mode is calculated from the hashed volume key, so the wipe message should wipe this IV key too and reinitialise it when the volume key is reinstated. This patch adds an IV wipe method called from a wipe message callback. ESSIV is then reinitialised using the init function added by the last patch. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:57 +00:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: add merge This patch implements biovec merge function for crypt target. If the underlying device has merge function defined, call it. If not, keep precomputed value. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:40 +01:00
dm: use dm_target_offset macro Use new dm_target_offset() macro to avoid most references to ti->begin in dm targets. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:11 +01:00
dm crypt: add merge This patch implements biovec merge function for crypt target. If the underlying device has merge function defined, call it. If not, keep precomputed value. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:40 +01:00
dm target:s introduce iterate devices fn Add .iterate_devices to 'struct target_type' to allow a function to be called for all devices in a DM target. Implemented it for all targets except those in dm-snap.c (origin and snapshot). (The raid1 version number jumps to 1.12 because we originally reserved 1.1 to 1.11 for 'block_on_error' but ended up using 'handle_errors' instead.) Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: martin.petersen@oracle.com
2009-06-22 10:12:33 +01:00
dm table: pass correct dev area size to device_area_is_valid Incorrect device area lengths are being passed to device_area_is_valid(). The regression appeared in 2.6.31-rc1 through commit 754c5fc7ebb417b23601a6222a6005cc2e7f2913. With the dm-stripe target, the size of the target (ti->len) was used instead of the stripe_width (ti->len/#stripes). An example of a consequent incorrect error message is: device-mapper: table: 254:0: sdb too small for target Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-07-23 20:30:42 +01:00
dm target:s introduce iterate devices fn Add .iterate_devices to 'struct target_type' to allow a function to be called for all devices in a DM target. Implemented it for all targets except those in dm-snap.c (origin and snapshot). (The raid1 version number jumps to 1.12 because we originally reserved 1.1 to 1.11 for 'block_on_error' but ended up using 'handle_errors' instead.) Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: martin.petersen@oracle.com
2009-06-22 10:12:33 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm crypt: add TCW IV mode for old CBC TCRYPT containers dm-crypt can already activate TCRYPT (TrueCrypt compatible) containers in LRW or XTS block encryption mode. TCRYPT containers prior to version 4.1 use CBC mode with some additional tweaks, this patch adds support for these containers. This new mode is implemented using special IV generator named TCW (TrueCrypt IV with whitening). TCW IV only supports containers that are encrypted with one cipher (Tested with AES, Twofish, Serpent, CAST5 and TripleDES). While this mode is legacy and is known to be vulnerable to some watermarking attacks (e.g. revealing of hidden disk existence) it can still be useful to activate old containers without using 3rd party software or for independent forensic analysis of such containers. (Both the userspace and kernel code is an independent implementation based on the format documentation and it completely avoids use of original source code.) The TCW IV generator uses two additional keys: Kw (whitening seed, size is always 16 bytes - TCW_WHITENING_SIZE) and Kiv (IV seed, size is always the IV size of the selected cipher). These keys are concatenated at the end of the main encryption key provided in mapping table. While whitening is completely independent from IV, it is implemented inside IV generator for simplification. The whitening value is always 16 bytes long and is calculated per sector from provided Kw as initial seed, xored with sector number and mixed with CRC32 algorithm. Resulting value is xored with ciphertext sector content. IV is calculated from the provided Kiv as initial IV seed and xored with sector number. Detailed calculation can be found in the Truecrypt documentation for version < 4.1 and will also be described on dm-crypt site, see: http://code.google.com/p/cryptsetup/wiki/DMCrypt The experimental support for activation of these containers is already present in git devel brach of cryptsetup. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-28 23:21:04 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm crypt: add key msg Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:37 -07:00
dm crypt: add merge This patch implements biovec merge function for crypt target. If the underlying device has merge function defined, call it. If not, keep precomputed value. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:40 +01:00
dm target:s introduce iterate devices fn Add .iterate_devices to 'struct target_type' to allow a function to be called for all devices in a DM target. Implemented it for all targets except those in dm-snap.c (origin and snapshot). (The raid1 version number jumps to 1.12 because we originally reserved 1.1 to 1.11 for 'block_on_error' but ended up using 'handle_errors' instead.) Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: martin.petersen@oracle.com
2009-06-22 10:12:33 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: use kmem_cache macro Use new KMEM_CACHE() macro and make the newly-exposed structure names more meaningful. Also remove some superfluous casts and inlines (let a modern compiler be the judge). Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 17:26:32 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] dm: improve error message consistency Tidy device-mapper error messages to include context information automatically. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:35 -07:00
dm crypt: use per device singlethread workqueues Use a separate single-threaded workqueue for each crypt device instead of one global workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-19 22:38:57 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dm: consolidate target deregistration error handling Change dm_unregister_target to return void and use BUG() for error reporting. dm_unregister_target can only fail because of programming bug in the target driver. It can't fail because of user's behavior or disk errors. This patch changes unregister_target to return void and use BUG if someone tries to unregister non-registered target or unregister target that is in use. This patch removes code duplication (testing of error codes in all dm targets) and reports bugs in just one place, in dm_unregister_target. In some target drivers, these return codes were ignored, which could lead to a situation where bugs could be missed. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:04:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00