linux

of: remove CONFIG_OF_DEVICE CONFIG_OF_DEVICE is always selected when CONFIG_OF is enabled, so remove it and simplify of_platform.h and of_device.h headers. This also fixes !OF compiles using of_platform_populate. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>

2013-04-19 17:32:52 -05:00

of: Move CONFIG_OF_DYNAMIC code into a separate file Split the dynamic device tree code into a separate file to make it really clear what features CONFIF_OF_DYNAMIC add to the kernel. Without CONFIG_OF_DYNAMIC only properties can be changed, and notifiers do not get sent. Enabling it turns on reference counting, notifiers and the ability to add and remove nodes. v2: Moved of_node_release() into dynamic.c Signed-off-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Rob Herring <robh+dt@kernel.org>

2014-06-26 15:40:48 +01:00

of/flattree: merge find_flat_dt_string and initial_boot_params Merge common code between Microblaze and PowerPC. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu>

2009-11-23 14:53:09 -07:00

of/fdt: add FDT address translation support Copy u-boot's FDT address translation code from common/fdt_support. This code was originally based on the kernel's unflattened DT address parsing code. This commit can be reverted once relicensing of this code to GPLv2/BSD is done and it is added to libfdt. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Grant Likely <grant.likely@linaro.org>

2014-03-27 07:37:43 -05:00

of/promtree: make drivers/of/pdt.c no longer sparc-only Clean up pdt.c: - make build dependent upon config OF_PROMTREE - #ifdef out the sparc-specific stuff - create pdt-specific header Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-10-10 21:42:33 -06:00

of/address: merge of_iomap() Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>

2010-06-08 07:48:09 -06:00

of/irq: Move irq_of_parse_and_map() to common code Merge common code between PowerPC and Microblaze. SPARC implements irq_of_parse_and_map(), but the implementation is different, so it does not use this code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Simek <monstr@monstr.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jeremy Kerr <jeremy.kerr@canonical.com>

2010-06-18 11:09:59 -06:00

of/net: Move of_get_mac_address() to a common source file. There are two identical implementations of of_get_mac_address(), one each in arch/powerpc/kernel/prom_parse.c and arch/microblaze/kernel/prom_parse.c. Move this function to a new common file of_net.{c,h} and adjust all the callers to include the new header. Signed-off-by: David Daney <ddaney@caviumnetworks.com> [grant.likely@secretlab.ca: protect header with #ifdef] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2010-10-26 15:07:13 -07:00

Adding selftest testdata dynamically into live tree This patch attaches selftest's device tree data (required by /drivers/of/selftest.c) dynamically into live device tree. First, it links selftest device tree data into the kernel image and then iterates over all the nodes and attaches them into the live tree. Once the testcases are complete, it removes the data attached. This patch will remove the manual process of addition and removal of selftest device tree data into the machine's dts file. Tested successfully with current selftest's testcases. Signed-off-by: Gaurav Minocha <gaurav.minocha.os@gmail.com> [glikely: Removed ability to build as a module and fixed no-devicetree bug] Signed-off-by: Grant Likely <grant.likely@linaro.org>

2014-07-16 23:09:39 -07:00

openfirmware: Add OF phylib support code Add support for parsing the device tree for PHY devices on an MDIO bus. Currently many of the PowerPC ethernet drivers are open coding a solution for reading data out of the device tree to find the correct PHY device. This patch implements a set of common routines to: a) let MDIO bus drivers register phy_devices described in the tree, and b) let MAC drivers find the correct phy_device via the tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-04-25 12:52:56 +00:00

of/pci: move of_irq_map_pci() into generic code There is a tiny difference between PPC32 and PPC64. Microblaze uses the PPC32 variant. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> [grant.likely@secretlab.ca: Added comment to #endif, moved documentation block to function implementation, fixed for non ppc and microblaze compiles] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2011-01-24 09:58:55 +05:30

pci/of: Match PCI devices to OF nodes dynamically powerpc has two different ways of matching PCI devices to their corresponding OF node (if any) for historical reasons. The ppc64 one does a scan looking for matching bus/dev/fn, while the ppc32 one does a scan looking only for matching dev/fn on each level in order to be agnostic to busses being renumbered (which Linux does on some platforms). This removes both and instead moves the matching code to the PCI core itself. It's the most logical place to do it: when a pci_dev is created, we know the parent and thus can do a single level scan for the matching device_node (if any). The benefit is that all archs now get the matching for free. There's one hook the arch might want to provide to match a PHB bus to its device node. A default weak implementation is provided that looks for the parent device device node, but it's not entirely reliable on powerpc for various reasons so powerpc provides its own. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>

2011-04-11 11:37:07 +10:00

of/mtd/nand: add generic bindings and helpers - nand-ecc-mode : String, operation mode of the NAND ecc mode. Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", "soft_bch". - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stefan Roese <sr@denx.de>

2012-01-28 12:12:36 +08:00

drivers: of: add initialization code for dynamic reserved memory This patch adds support for dynamically allocated reserved memory regions declared in device tree. Such regions are defined by 'size', 'alignment' and 'alloc-ranges' properties. Based on previous code provided by Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>

2014-02-28 14:42:48 +01:00

of/fdt: Convert FDT functions to use libfdt The kernel FDT functions predate libfdt and are much more limited in functionality. Also, the kernel functions and libfdt functions are not compatible with each other because they have different definitions of node offsets. To avoid this incompatibility and in preparation to add more FDT parsing functions which will need libfdt, let's first convert the existing code to use libfdt. The FDT unflattening, top-level FDT scanning, and property retrieval functions are converted to use libfdt. The scanning code should be re-worked to be more efficient and understandable by using libfdt to find nodes directly by path or compatible strings. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Grant Likely <grant.likely@linaro.org> Tested-by: Stephen Chivers <schivers@csc.com>

2014-04-02 15:10:14 -05:00

of/fdt: add FDT address translation support Copy u-boot's FDT address translation code from common/fdt_support. This code was originally based on the kernel's unflattened DT address parsing code. This commit can be reverted once relicensing of this code to GPLv2/BSD is done and it is added to libfdt. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Grant Likely <grant.likely@linaro.org>

2014-03-27 07:37:43 -05:00

18 lines 702 B Raw Permalink Normal View History

18 lines

702 B

Raw Permalink Normal View History