kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-28 19:20:30 +00:00
Code Issues Releases Packages Activity
linux/drivers/extcon/extcon-class.c

1035 lines
28 KiB
Raw Permalink Normal View History

Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: Ensure dynamically allocated sysfs attributes are initialised The operation of lockdep requires that all dynamically allocated sysfs nodes are initialised using sysfs_attr_init() otherwise lots of warnings are generated. Ensure that all the dynamically allocated attributes that extcon generates have this done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 20:03:21 +01:00
extcon: Move OF helper function to extcon core and change function name This patch move simply OF helper function to extcon core and change function name as following: - of_extcon_get_extcon_dev() -> extcon_get_edev_by_phandle() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com>
2014-03-18 19:55:46 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: standard cable names definition and declaration changed With this change now individual drivers can use standard cable names as below: static const char *arizona_cable[] = { extcon_cable_name[EXTCON_USB], extcon_cable_name[EXTCON_USB_HOST], "CUSTOM_CABLE" NULL, } Signed-off-by: anish kumar <anish198519851985@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2012-08-30 00:35:09 +05:30
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Add EXTCON_MECHANICAL cable type for physical presence Some accessory detection mechanisms are able to detect that something is physically present in the socket separately to identifying what is present in the socket. This information can be useful to applications, for example allowing them to indicate that a potentially broken accessory is present, so provide a standard way to report it to userspace. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02 10:38:51 +01:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: Staticise extcon_class It's not referenced outside the core file. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-05 16:14:38 +01:00
Remove "switch" class in drivers/staging/android/switch Because extcon can also be a switch class for legacy userspace (Android) and is a superset of switch class in drivers/staging/android/switch, switch class may be removed. - Remove switch class - Remove switch class consideration in extcon class Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-23 20:19:57 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Remove "switch" class in drivers/staging/android/switch Because extcon can also be a switch class for legacy userspace (Android) and is a superset of switch class in drivers/staging/android/switch, switch class may be removed. - Remove switch class - Remove switch class consideration in extcon class Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-23 20:19:57 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support notification based on the state changes. State changes of extcon devices have been notified via kobjet_uevent. This patch adds notifier interfaces in order to allow device drivers to get notified easily. Along with notifier interface, extcon_get_extcon_dev() function is added so that device drivers may discover a extcon_dev easily. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from RFC - Renamed switch to extcon - Bugfix: extcon_dev_unregister() - Bugfix: "edev->dev" is "internal" data. - Added kerneldoc comments. - Reworded comments. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:24 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
extcon: Fix indentation coding style to improve readability Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-31 13:16:49 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
extcon: optimising the check_mutually_exclusive function Rather than re-inventing the wheel we can use the hamming function to calculate the number of bits set to check for violation of exclusivity. Signed-off-by: anish kumar <anish198519851985@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2012-08-30 00:35:10 +05:30
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
extcon: optimising the check_mutually_exclusive function Rather than re-inventing the wheel we can use the hamming function to calculate the number of bits set to check for violation of exclusivity. Signed-off-by: anish kumar <anish198519851985@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2012-08-30 00:35:10 +05:30
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Remove casting the return value which is a void pointer Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2013-09-09 14:33:32 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Remove casting the return value which is a void pointer Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2013-09-09 14:33:32 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: convert extcon_class to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the extcon_class code to use the correct field. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Chanwoo Choi<cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:10 -07:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: Remove casting the return value which is a void pointer Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2013-09-09 14:33:32 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: convert extcon_class to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the extcon_class code to use the correct field. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Chanwoo Choi<cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:10 -07:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Fix indentation coding style to improve readability Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-31 13:16:49 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support notification based on the state changes. State changes of extcon devices have been notified via kobjet_uevent. This patch adds notifier interfaces in order to allow device drivers to get notified easily. Along with notifier interface, extcon_get_extcon_dev() function is added so that device drivers may discover a extcon_dev easily. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from RFC - Renamed switch to extcon - Bugfix: extcon_dev_unregister() - Bugfix: "edev->dev" is "internal" data. - Added kerneldoc comments. - Reworded comments. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:24 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support notification based on the state changes. State changes of extcon devices have been notified via kobjet_uevent. This patch adds notifier interfaces in order to allow device drivers to get notified easily. Along with notifier interface, extcon_get_extcon_dev() function is added so that device drivers may discover a extcon_dev easily. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from RFC - Renamed switch to extcon - Bugfix: extcon_dev_unregister() - Bugfix: "edev->dev" is "internal" data. - Added kerneldoc comments. - Reworded comments. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:24 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Fix kerneldoc for extcon_set_cable_state and extcon_set_cable_state_ Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2012-10-04 09:53:45 +09:00
extcon: Fix indentation coding style to improve readability Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-31 13:16:49 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Fix kerneldoc for extcon_set_cable_state and extcon_set_cable_state_ Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2012-10-04 09:53:45 +09:00
extcon: Fix indentation coding style to improve readability Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-31 13:16:49 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support notification based on the state changes. State changes of extcon devices have been notified via kobjet_uevent. This patch adds notifier interfaces in order to allow device drivers to get notified easily. Along with notifier interface, extcon_get_extcon_dev() function is added so that device drivers may discover a extcon_dev easily. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from RFC - Renamed switch to extcon - Bugfix: extcon_dev_unregister() - Bugfix: "edev->dev" is "internal" data. - Added kerneldoc comments. - Reworded comments. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:24 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: Notify changed state for only one cable to notifee This patch inform the state of only one cable instead of previous data including the state of 32 cables to notifee which use extcon_register_interest() function to monitor whether the specific cable is attachd or detached. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27 15:17:28 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: Notify changed state for only one cable to notifee This patch inform the state of only one cable instead of previous data including the state of 32 cables to notifee which use extcon_register_interest() function to monitor whether the specific cable is attachd or detached. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27 15:17:28 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Fix indentation coding style to improve readability Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-31 13:16:49 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon : register for cable interest by cable name There are some scnearios where a driver/framework needs to register interest for a particular cable without specifying the extcon device name. One such scenario is charger notifications. The platform will have charger cabel which will be bound to any extcon device. It's not mandatory for the charger driver to know which extcon device it should use. This patch enables the support for registering interest for a cable just by cable name wihtout specifying the extcon device name Signed-off-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> -- Kernel-doc comment added by MyungJoo Ham
2012-10-18 21:00:32 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Fix indentation coding style to improve readability Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-31 13:16:49 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon : register for cable interest by cable name There are some scnearios where a driver/framework needs to register interest for a particular cable without specifying the extcon device name. One such scenario is charger notifications. The platform will have charger cabel which will be bound to any extcon device. It's not mandatory for the charger driver to know which extcon device it should use. This patch enables the support for registering interest for a cable just by cable name wihtout specifying the extcon device name Signed-off-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> -- Kernel-doc comment added by MyungJoo Ham
2012-10-18 21:00:32 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon : register for cable interest by cable name There are some scnearios where a driver/framework needs to register interest for a particular cable without specifying the extcon device name. One such scenario is charger notifications. The platform will have charger cabel which will be bound to any extcon device. It's not mandatory for the charger driver to know which extcon device it should use. This patch enables the support for registering interest for a cable just by cable name wihtout specifying the extcon device name Signed-off-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> -- Kernel-doc comment added by MyungJoo Ham
2012-10-18 21:00:32 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Fix up 80 column coding style issues This patch fix 80 column coding sytle issues by using checkpatch script. Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23 10:21:37 +09:00
extcon : register for cable interest by cable name There are some scnearios where a driver/framework needs to register interest for a particular cable without specifying the extcon device name. One such scenario is charger notifications. The platform will have charger cabel which will be bound to any extcon device. It's not mandatory for the charger driver to know which extcon device it should use. This patch enables the support for registering interest for a cable just by cable name wihtout specifying the extcon device name Signed-off-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> -- Kernel-doc comment added by MyungJoo Ham
2012-10-18 21:00:32 +09:00
extcon: Fix return value in extcon-class.c Return the value obtained from the function extcon_register_interest instead of -ENODEV. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2012-11-20 16:30:31 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon : register for cable interest by cable name There are some scnearios where a driver/framework needs to register interest for a particular cable without specifying the extcon device name. One such scenario is charger notifications. The platform will have charger cabel which will be bound to any extcon device. It's not mandatory for the charger driver to know which extcon device it should use. This patch enables the support for registering interest for a cable just by cable name wihtout specifying the extcon device name Signed-off-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> -- Kernel-doc comment added by MyungJoo Ham
2012-10-18 21:00:32 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon : register for cable interest by cable name There are some scnearios where a driver/framework needs to register interest for a particular cable without specifying the extcon device name. One such scenario is charger notifications. The platform will have charger cabel which will be bound to any extcon device. It's not mandatory for the charger driver to know which extcon device it should use. This patch enables the support for registering interest for a cable just by cable name wihtout specifying the extcon device name Signed-off-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> -- Kernel-doc comment added by MyungJoo Ham
2012-10-18 21:00:32 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Fix up 80 column coding style issues This patch fix 80 column coding sytle issues by using checkpatch script. Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23 10:21:37 +09:00
extcon : register for cable interest by cable name There are some scnearios where a driver/framework needs to register interest for a particular cable without specifying the extcon device name. One such scenario is charger notifications. The platform will have charger cabel which will be bound to any extcon device. It's not mandatory for the charger driver to know which extcon device it should use. This patch enables the support for registering interest for a cable just by cable name wihtout specifying the extcon device name Signed-off-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> -- Kernel-doc comment added by MyungJoo Ham
2012-10-18 21:00:32 +09:00
extcon: Remove casting the return value which is a void pointer Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2013-09-09 14:33:32 +09:00
extcon : register for cable interest by cable name There are some scnearios where a driver/framework needs to register interest for a particular cable without specifying the extcon device name. One such scenario is charger notifications. The platform will have charger cabel which will be bound to any extcon device. It's not mandatory for the charger driver to know which extcon device it should use. This patch enables the support for registering interest for a cable just by cable name wihtout specifying the extcon device name Signed-off-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> -- Kernel-doc comment added by MyungJoo Ham
2012-10-18 21:00:32 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: add EXPORT_SYMBOL_GPL for exported functions Added EXPORT_SYMBOL_GPL() for extcon_register_interest and extcon_register_notifier in order to avoid undefined reference error when building the consumer modules of extcon as _modules_. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04 01:13:38 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Fix indentation coding style to improve readability Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-31 13:16:49 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: add EXPORT_SYMBOL_GPL for exported functions Added EXPORT_SYMBOL_GPL() for extcon_register_interest and extcon_register_notifier in order to avoid undefined reference error when building the consumer modules of extcon as _modules_. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04 01:13:38 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support notification based on the state changes. State changes of extcon devices have been notified via kobjet_uevent. This patch adds notifier interfaces in order to allow device drivers to get notified easily. Along with notifier interface, extcon_get_extcon_dev() function is added so that device drivers may discover a extcon_dev easily. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from RFC - Renamed switch to extcon - Bugfix: extcon_dev_unregister() - Bugfix: "edev->dev" is "internal" data. - Added kerneldoc comments. - Reworded comments. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:24 +09:00
extcon: fixing typos Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-23 09:11:54 +09:00
extcon: Fix indentation coding style to improve readability Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-31 13:16:49 +09:00
Extcon: support notification based on the state changes. State changes of extcon devices have been notified via kobjet_uevent. This patch adds notifier interfaces in order to allow device drivers to get notified easily. Along with notifier interface, extcon_get_extcon_dev() function is added so that device drivers may discover a extcon_dev easily. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from RFC - Renamed switch to extcon - Bugfix: extcon_dev_unregister() - Bugfix: "edev->dev" is "internal" data. - Added kerneldoc comments. - Reworded comments. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:24 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support notification based on the state changes. State changes of extcon devices have been notified via kobjet_uevent. This patch adds notifier interfaces in order to allow device drivers to get notified easily. Along with notifier interface, extcon_get_extcon_dev() function is added so that device drivers may discover a extcon_dev easily. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from RFC - Renamed switch to extcon - Bugfix: extcon_dev_unregister() - Bugfix: "edev->dev" is "internal" data. - Added kerneldoc comments. - Reworded comments. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:24 +09:00
extcon: fixing typos Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-23 09:11:54 +09:00
Extcon: support notification based on the state changes. State changes of extcon devices have been notified via kobjet_uevent. This patch adds notifier interfaces in order to allow device drivers to get notified easily. Along with notifier interface, extcon_get_extcon_dev() function is added so that device drivers may discover a extcon_dev easily. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from RFC - Renamed switch to extcon - Bugfix: extcon_dev_unregister() - Bugfix: "edev->dev" is "internal" data. - Added kerneldoc comments. - Reworded comments. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:24 +09:00
extcon: convert extcon_class to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the extcon_class code to use the correct field. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Chanwoo Choi<cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:10 -07:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: convert extcon_class to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the extcon_class code to use the correct field. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Chanwoo Choi<cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:10 -07:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: convert extcon_class to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the extcon_class code to use the correct field. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Chanwoo Choi<cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:10 -07:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Remove "switch" class in drivers/staging/android/switch Because extcon can also be a switch class for legacy userspace (Android) and is a superset of switch class in drivers/staging/android/switch, switch class may be removed. - Remove switch class - Remove switch class consideration in extcon class Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-23 20:19:57 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Remove "switch" class in drivers/staging/android/switch Because extcon can also be a switch class for legacy userspace (Android) and is a superset of switch class in drivers/staging/android/switch, switch class may be removed. - Remove switch class - Remove switch class consideration in extcon class Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-23 20:19:57 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Add extcon_dev_allocate/free() to control the memory of extcon device This patch add APIs to control the extcon device on extcon provider driver. The extcon_dev_allocate() allocates the memory of extcon device and initializes supported cables. And then extcon_dev_free() decrement the reference of the device of extcon device and free the memory of the extcon device. This APIs must need to implement devm_extcon_dev_allocate()/free() APIs. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2014-04-24 19:46:49 +09:00
extcon: Add devm_extcon_dev_allocate/free to manage the resource of extcon device This patch add device managed devm_extcon_dev_{allocate,free} to automatically free the memory of extcon_dev structure without handling free operation. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2014-04-24 20:12:15 +09:00
extcon: Set parent device of extcon device using prameter of devm_extcon_dev_allocate This patch set the parent device of extcon device using first parameter of devm_extco_dev_allocate() to remove duplicate code on all of extcon provider drivers. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reported-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Mark Brown <broonie@kernel.org> Cc: Graeme Gregory <gg@slimlogic.co.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2014-05-30 10:13:15 +09:00
extcon: Add devm_extcon_dev_allocate/free to manage the resource of extcon device This patch add device managed devm_extcon_dev_{allocate,free} to automatically free the memory of extcon_dev structure without handling free operation. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2014-04-24 20:12:15 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: Simplify extcon_dev_register() prototype by removing unnecessary parameter This patch remove extcon_dev_register()'s second parameter which means the pointer of parent device to simplify prototype of this function. So, if extcon device has the parent device, it should set the pointer of parent device to edev.dev.parent in extcon device driver instead of in extcon_dev_register(). Cc: Graeme Gregory <gg@slimlogic.co.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-09-27 09:20:26 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: Simplify extcon_dev_register() prototype by removing unnecessary parameter This patch remove extcon_dev_register()'s second parameter which means the pointer of parent device to simplify prototype of this function. So, if extcon device has the parent device, it should set the pointer of parent device to edev.dev.parent in extcon device driver instead of in extcon_dev_register(). Cc: Graeme Gregory <gg@slimlogic.co.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-09-27 09:20:26 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Ensure dynamically allocated sysfs attributes are initialised The operation of lockdep requires that all dynamically allocated sysfs nodes are initialised using sysfs_attr_init() otherwise lots of warnings are generated. Ensure that all the dynamically allocated attributes that extcon generates have this done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 20:03:21 +01:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Ensure dynamically allocated sysfs attributes are initialised The operation of lockdep requires that all dynamically allocated sysfs nodes are initialised using sysfs_attr_init() otherwise lots of warnings are generated. Ensure that all the dynamically allocated attributes that extcon generates have this done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 20:03:21 +01:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Change permission 'state' sysfs entry (rw -> r) This patch change permission from read/write to only read. The specific process in the user-space couldn't change the state of cable when cable is attached or detached. - /sys/class/extcon/[devine name]/state Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-22 19:31:59 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
extcon: Ensure dynamically allocated sysfs attributes are initialised The operation of lockdep requires that all dynamically allocated sysfs nodes are initialised using sysfs_attr_init() otherwise lots of warnings are generated. Ensure that all the dynamically allocated attributes that extcon generates have this done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 20:03:21 +01:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Remove "switch" class in drivers/staging/android/switch Because extcon can also be a switch class for legacy userspace (Android) and is a superset of switch class in drivers/staging/android/switch, switch class may be removed. - Remove switch class - Remove switch class consideration in extcon class Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-23 20:19:57 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Remove "switch" class in drivers/staging/android/switch Because extcon can also be a switch class for legacy userspace (Android) and is a superset of switch class in drivers/staging/android/switch, switch class may be removed. - Remove switch class - Remove switch class consideration in extcon class Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-23 20:19:57 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support notification based on the state changes. State changes of extcon devices have been notified via kobjet_uevent. This patch adds notifier interfaces in order to allow device drivers to get notified easily. Along with notifier interface, extcon_get_extcon_dev() function is added so that device drivers may discover a extcon_dev easily. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from RFC - Renamed switch to extcon - Bugfix: extcon_dev_unregister() - Bugfix: "edev->dev" is "internal" data. - Added kerneldoc comments. - Reworded comments. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:24 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support notification based on the state changes. State changes of extcon devices have been notified via kobjet_uevent. This patch adds notifier interfaces in order to allow device drivers to get notified easily. Along with notifier interface, extcon_get_extcon_dev() function is added so that device drivers may discover a extcon_dev easily. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from RFC - Renamed switch to extcon - Bugfix: extcon_dev_unregister() - Bugfix: "edev->dev" is "internal" data. - Added kerneldoc comments. - Reworded comments. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:24 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support mutually exclusive relation between cables. There could be cables that t recannot be attaches simulatenously. Extcon device drivers may express such information via mutually_exclusive in struct extcon_dev. For example, for an extcon device with 16 cables (bits 0 to 15 are available), if mutually_exclusive = { 0x7, 0xC0, 0x81, 0 }, then, the following attachments are prohibitted. {0, 1} {0, 2} {1, 2} {6, 7} {0, 7} and every attachment set that are superset of one of the above. For the detail, please refer to linux/include/linux/extcon.h. The concept is suggested by NeilBrown <neilb@suse.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V5: - Updated sysfs format Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:26 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: fixing typos Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-23 09:11:54 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: driver model release call not needed There was a case where free and list_del can be called twice on the same pointer.So fixed it by re-arranging the code and removing a function which was not needed. Signed-off-by: anish kumar <anish198519851985@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2012-10-22 09:43:33 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
extcon: driver model release call not needed There was a case where free and list_del can be called twice on the same pointer.So fixed it by re-arranging the code and removing a function which was not needed. Signed-off-by: anish kumar <anish198519851985@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2012-10-22 09:43:33 +09:00
extcon: remove freed groups caused the panic or warning in unregister flow (edev->extcon_dev_type.groups) has been freed before device_unregister. extcon_dev_unregister -> kfree(edev->extcon_dev_type.groups) then device_unregister -> device_del -> device_remove_attrs -> device_remove_groups(dev, type->groups); panic because type->groups has been freed. This patch is move device_unregister ahead of groups free to avoid panic in extcon_dev_unregister. stack [ 22.847226] BUG: unable to handle kernel paging request at 5f39746e [ 22.847234] IP: [<c1387fcd>] sysfs_remove_group+0x2d/0xd0 [ 22.847238] *pdpt = 0000000000000000 *pde = 0000000000000000 [ 22.847241] Oops: 0000 [#1] PREEMPT SMP [ 22.847244] Modules linked in: [ 22.847249] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.16-261140-g6533774 #1 [ 22.847251] task: f3078000 ti: f3072000 task.ti: f3072000 [ 22.847254] EIP: 0060:[<c1387fcd>] EFLAGS: 00010206 CPU: 0 [ 22.847257] EIP is at sysfs_remove_group+0x2d/0xd0 [ 22.847259] EAX: 00000004 EBX: 5f39746e ECX: 00000000 EDX: f2773560 [ 22.847261] ESI: f2653b80 EDI: f2773560 EBP: f3073c90 ESP: f3073c70 [ 22.847263] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 22.847264] CR0: 8005003b CR2: 5f39746e CR3: 020e5000 CR4: 001007f0 [ 22.847266] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 22.847268] DR6: ffff0ff0 DR7: 00000400 [ 22.847269] Stack: [ 22.847276] c13848c9 c1ae3805 f3073c80 f24ddc4c 00000246 f2773e88 f1c44408 f2531340 [ 22.847283] f3073ca0 c16935ca f1c44400 f27d3340 f3073cb4 c1693858 f24ddc44 f1c44400 [ 22.847289] f1c4420c f3073cc8 c1693f76 f1c44400 00000001 00000000 f3073ce8 c1694011 [ 22.847290] Call Trace: [ 22.847295] [<c13848c9>] ? sysfs_hash_and_remove+0x49/0xa0 [ 22.847300] [<c1ae3805>] ? sub_preempt_count+0x55/0xe0 [ 22.847306] [<c16935ca>] device_remove_groups+0x2a/0x40 [ 22.847309] [<c1693858>] device_remove_attrs+0x38/0x60 [ 22.847313] [<c1693f76>] device_del+0xd6/0x150 [ 22.847316] [<c1694011>] device_unregister+0x21/0x60 [ 22.847320] [<c13869e8>] ? sysfs_remove_link+0x18/0x30 [ 22.847323] [<c1697d04>] ? class_compat_remove_link+0x34/0x50 [ 22.847329] [<c18bf5d9>] extcon_dev_unregister+0xf9/0x130 [ 22.847333] [<c18bd21f>] pwrsrc_extcon_dev_reg_callback+0x7f/0xa0 [ 22.847337] [<c1ae36e3>] notifier_call_chain+0x43/0x60 [ 22.847343] [<c12634e1>] __blocking_notifier_call_chain+0x41/0x80 [ 22.847347] [<c126353f>] blocking_notifier_call_chain+0x1f/0x30 [ 22.847351] [<c18bef39>] extcon_dev_notify_add_device+0x19/0x20 [ 22.847354] [<c18bf074>] extcon_dev_register+0x134/0x580 [ 22.847358] [<c1ae3805>] ? sub_preempt_count+0x55/0xe0 [ 22.847363] [<c154b4da>] ? gpiod_request+0x6a/0x1d0 [ 22.847368] [<c132528a>] ? kmem_cache_alloc_trace+0xaa/0x170 [ 22.847372] [<c18c0179>] ? fsa9285_probe+0x99/0x3f0 [ 22.847375] [<c18c00e0>] ? fsa9285_irq_handler+0xf0/0xf0 [ 22.847379] [<c18c019f>] fsa9285_probe+0xbf/0x3f0 [ 22.847383] [<c18c00e0>] ? fsa9285_irq_handler+0xf0/0xf0 [ 22.847388] [<c1828d9e>] i2c_device_probe+0x7e/0xf0 [ 22.847392] [<c1386e52>] ? sysfs_create_link+0x22/0x40 [ 22.847395] [<c1696c62>] ? driver_sysfs_add+0x72/0xa0 [ 22.847399] [<c1697119>] driver_probe_device+0x79/0x360 [ 22.847403] [<c1697491>] __driver_attach+0x91/0xa0 [ 22.847407] [<c1697400>] ? driver_probe_device+0x360/0x360 [ 22.847410] [<c16955a2>] bus_for_each_dev+0x42/0x80 [ 22.847414] [<c1696bee>] driver_attach+0x1e/0x20 [ 22.847417] [<c1697400>] ? driver_probe_device+0x360/0x360 [ 22.847420] [<c169675f>] bus_add_driver+0xef/0x270 [ 22.847425] [<c1828e10>] ? i2c_device_probe+0xf0/0xf0 [ 22.847428] [<c1828e10>] ? i2c_device_probe+0xf0/0xf0 [ 22.847432] [<c1697a8a>] driver_register+0x6a/0x160 [ 22.847436] [<c1addb3d>] ? mutex_unlock+0xd/0x10 [ 22.847440] [<c1438ab2>] ? __create_file+0x122/0x2a0 [ 22.847446] [<c20557d3>] ? extcon_class_init+0x15/0x15 [ 22.847450] [<c1827cbb>] i2c_register_driver+0x2b/0xd0 [ 22.847454] [<c1438d05>] ? debugfs_create_file+0x35/0x40 [ 22.847458] [<c20557d3>] ? extcon_class_init+0x15/0x15 [ 22.847461] [<c20557e4>] fsa9285_extcon_init+0x11/0x29 [ 22.847465] [<c12001aa>] do_one_initcall+0xba/0x170 [ 22.847471] [<c2012b4a>] kernel_init_freeable+0x119/0x1b8 [ 22.847475] [<c20124d3>] ? do_early_param+0x7a/0x7a [ 22.847480] [<c1ac4090>] kernel_init+0x10/0xd0 [ 22.847485] [<c1ae6cf7>] ret_from_kernel_thread+0x1b/0x28 [ 22.847488] [<c1ac4080>] ? rest_init+0x80/0x80 Tested-by: Liu, Chuansheng <chuansheng.liu@intel.com> Reviewed-by: Liu, Chuansheng <chuansheng.liu@intel.com> Signed-off-by: xiaoming wang <xiaoming.wang@intel.com> Signed-off-by: Zhang Dongxing <dongxing.zhang@intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2013-11-01 18:48:14 -04:00
extcon: driver model release call not needed There was a case where free and list_del can be called twice on the same pointer.So fixed it by re-arranging the code and removing a function which was not needed. Signed-off-by: anish kumar <anish198519851985@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2012-10-22 09:43:33 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
extcon: driver model release call not needed There was a case where free and list_del can be called twice on the same pointer.So fixed it by re-arranging the code and removing a function which was not needed. Signed-off-by: anish kumar <anish198519851985@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2012-10-22 09:43:33 +09:00
extcon: Change field type of 'dev' in extcon_dev structure The extcon device must always need 'struct device' so this patch change field type of 'dev' instead of allocating memory for 'struct device' on extcon_dev_register() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
2013-09-27 09:19:40 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: Add resource-managed extcon register function Add resource-managed extcon device register function for convenience. For example, if a extcon device is attached with new devm_extcon_dev_register(), that extcon device is automatically unregistered on driver detach. Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com> [Fix bug about devm_extcon_dev_match/release() and code clean by Chanwoo Choi] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-21 19:10:08 +09:00
extcon: Move OF helper function to extcon core and change function name This patch move simply OF helper function to extcon core and change function name as following: - of_extcon_get_extcon_dev() -> extcon_get_edev_by_phandle() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com>
2014-03-18 19:55:46 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: Unregister compat class at module unload to fix oops If you compile extcon with CONFIG_ANDROID and then load and unload the module you get a simple oops as the driver does not unregister its compat class and thus cannot register it again. Full trace: root@(none):~# modprobe extcon_class root@(none):~# rmmod extcon_class root@(none):~# modprobe extcon_class ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0xde/0x100() sysfs: cannot create duplicate filename '/class/switch' Modules linked in: extcon_class(+) [last unloaded: extcon_class] Call Trace: 9f451a00: [<602a58bc>] printk+0x0/0xa8 9f451a18: [<60039b43>] warn_slowpath_common+0x93/0xd0 9f451a28: [<6012c6de>] sysfs_add_one+0xde/0x100 9f451a50: [<601d3d90>] strcat+0x0/0x40 9f451a68: [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0 9f451a90: [<6002fe32>] unblock_signals+0x0/0x84 9f451ab0: [<60039c40>] warn_slowpath_fmt+0x0/0xa0 9f451ac0: [<6002fe32>] unblock_signals+0x0/0x84 9f451ae8: [<6012bd97>] sysfs_pathname.isra.10+0x57/0x70 9f451b00: [<601d3d90>] strcat+0x0/0x40 9f451b18: [<6012bd97>] sysfs_pathname.isra.10+0x57/0x70 9f451b48: [<6012c6de>] sysfs_add_one+0xde/0x100 9f451b78: [<6012c96f>] create_dir+0x8f/0x100 9f451bc0: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class] 9f451bd8: [<6012cda6>] sysfs_create_dir+0xa6/0x1c0 9f451be8: [<601d89f1>] kvasprintf+0x81/0xa0 9f451bf8: [<601cf0f0>] kobject_get+0x0/0x50 9f451c18: [<601cf396>] kobject_add_internal+0x96/0x280 9f451c60: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class] 9f451c78: [<601cfb93>] kobject_add+0xd3/0x140 9f451cc0: [<601cfac0>] kobject_add+0x0/0x140 9f451cd0: [<6002fe32>] unblock_signals+0x0/0x84 9f451cf8: [<6002fffc>] set_signals+0x29/0x3f 9f451d28: [<600c1de1>] kmem_cache_alloc+0xe1/0x100 9f451d78: [<601cffa0>] kobject_create_and_add+0x50/0xa0 9f451da8: [<601fbe76>] class_compat_register+0x56/0x80 9f451dc8: [<a085d118>] create_extcon_class+0x88/0xd0 [extcon_class] 9f451de8: [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class] 9f451df8: [<600189a8>] do_one_initcall+0x48/0x1f0 9f451e20: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e30: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e58: [<6007e3c3>] sys_init_module+0xa3/0x280 9f451e88: [<6001e2ad>] handle_syscall+0x8d/0x90 9f451ea8: [<60033370>] userspace+0x405/0x531 9f451ee8: [<6001e380>] copy_chunk_to_user+0x0/0x40 9f451ef8: [<6001e5cd>] do_op_one_page+0x14d/0x220 9f451fd8: [<6001a355>] fork_handler+0x95/0xa0 ---[ end trace dd512cc03fe1c367 ]--- ------------[ cut here ]------------ WARNING: at lib/kobject.c:196 kobject_add_internal+0x26e/0x280() kobject_add_internal failed for switch with -EEXIST, don't try to register things with the same name in the same directory. Modules linked in: extcon_class(+) [last unloaded: extcon_class] Call Trace: 9f451ad0: [<602a58bc>] printk+0x0/0xa8 9f451ae8: [<60039b43>] warn_slowpath_common+0x93/0xd0 9f451af8: [<601cf56e>] kobject_add_internal+0x26e/0x280 9f451b18: [<601cf140>] kobject_put+0x0/0x70 9f451b20: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class] 9f451b38: [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0 9f451b88: [<60039c40>] warn_slowpath_fmt+0x0/0xa0 9f451bc0: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class] 9f451bd8: [<6012cda6>] sysfs_create_dir+0xa6/0x1c0 9f451be8: [<601d89f1>] kvasprintf+0x81/0xa0 9f451bf8: [<601cf0f0>] kobject_get+0x0/0x50 9f451c18: [<601cf56e>] kobject_add_internal+0x26e/0x280 9f451c60: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class] 9f451c78: [<601cfb93>] kobject_add+0xd3/0x140 9f451cc0: [<601cfac0>] kobject_add+0x0/0x140 9f451cd0: [<6002fe32>] unblock_signals+0x0/0x84 9f451cf8: [<6002fffc>] set_signals+0x29/0x3f 9f451d28: [<600c1de1>] kmem_cache_alloc+0xe1/0x100 9f451d78: [<601cffa0>] kobject_create_and_add+0x50/0xa0 9f451da8: [<601fbe76>] class_compat_register+0x56/0x80 9f451dc8: [<a085d118>] create_extcon_class+0x88/0xd0 [extcon_class] 9f451de8: [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class] 9f451df8: [<600189a8>] do_one_initcall+0x48/0x1f0 9f451e20: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e30: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e58: [<6007e3c3>] sys_init_module+0xa3/0x280 9f451e88: [<6001e2ad>] handle_syscall+0x8d/0x90 9f451ea8: [<60033370>] userspace+0x405/0x531 9f451ee8: [<6001e380>] copy_chunk_to_user+0x0/0x40 9f451ef8: [<6001e5cd>] do_op_one_page+0x14d/0x220 9f451fd8: [<6001a355>] fork_handler+0x95/0xa0 ---[ end trace dd512cc03fe1c368 ]--- kobject_create_and_add: kobject_add error: -17 ------------[ cut here ]------------ WARNING: at drivers/extcon/extcon_class.c:545 create_extcon_class+0xbc/0xd0 [extcon_class]() cannot allocate Modules linked in: extcon_class(+) [last unloaded: extcon_class] Call Trace: 9f451c80: [<602a58bc>] printk+0x0/0xa8 9f451c98: [<60039b43>] warn_slowpath_common+0x93/0xd0 9f451ca0: [<6002fe32>] unblock_signals+0x0/0x84 9f451ca8: [<a085d14c>] create_extcon_class+0xbc/0xd0 [extcon_class] 9f451cd0: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class] 9f451ce8: [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0 9f451d20: [<6002fe32>] unblock_signals+0x0/0x84 9f451d28: [<60039c40>] warn_slowpath_fmt+0x0/0xa0 9f451d48: [<6002fffc>] set_signals+0x29/0x3f 9f451d58: [<601cf172>] kobject_put+0x32/0x70 9f451d78: [<600c22c3>] kfree+0xb3/0x100 9f451da8: [<601fbe9a>] class_compat_register+0x7a/0x80 9f451dc8: [<a085d14c>] create_extcon_class+0xbc/0xd0 [extcon_class] 9f451de8: [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class] 9f451df8: [<600189a8>] do_one_initcall+0x48/0x1f0 9f451e20: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e30: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e58: [<6007e3c3>] sys_init_module+0xa3/0x280 9f451e88: [<6001e2ad>] handle_syscall+0x8d/0x90 9f451ea8: [<60033370>] userspace+0x405/0x531 9f451ee8: [<6001e380>] copy_chunk_to_user+0x0/0x40 9f451ef8: [<6001e5cd>] do_op_one_page+0x14d/0x220 9f451fd8: [<6001a355>] fork_handler+0x95/0xa0 ---[ end trace dd512cc03fe1c369 ]--- FATAL: Error inserting extcon_class (/lib/modules/3.6.0-rc6-00178-g811315f/kernel/drivers/extcon/extcon_class.ko): Cannot allocate memory This patch fixes this. Cc: stable@vger.kernel.org Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2012-09-24 15:32:31 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00