kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-28 19:20:30 +00:00
Code Issues Releases Packages Activity
linux/scripts/kconfig/confdata.c

1242 lines
26 KiB
Raw Permalink Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kbuild: confdata.c explicitly reference errno, thus need <errno.h> This fixes: % gmake LKC_GENPARSER=1 menuconfig [...] scripts/kconfig/confdata.c:739: error: 'errno' undeclared (first use in this function) scripts/kconfig/confdata.c:739: error: (Each undeclared identifier is reported only once scripts/kconfig/confdata.c:739: error: for each function it appears in.) scripts/kconfig/confdata.c:739: error: 'ENOENT' undeclared (first use in this function) triggered on NetBSD. Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-17 01:40:20 -04:00
kconfig: integrate split config into silentoldconfig Now that kconfig can load multiple configurations, it becomes simple to integrate the split config step, by simply comparing the new .config file with the old auto.conf (and then saving the new auto.conf). A nice side effect is that this saves a bit of disk space and cache, as no data needs to be read from or saved into the splitted config files anymore (e.g. include/config is now 648KB instead of 5.2MB). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: add missing <stdarg.h> inclusion This header is needed when using va_{start,end,copy}(3) functions family. Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-01 16:00:46 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
kconfig: Allow frontends to display messages themselves Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-17 10:21:19 +02:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
kconfig: Allow frontends to display messages themselves Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-17 10:21:19 +02:00
kconfig: KCONFIG_OVERWRITECONFIG If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break symlinks when .config is a symlink to somewhere else. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:51 -07:00
kconfig: do not hardcode "include/config/auto.conf" filename Regardless of KCONFIG_AUTOCONFIG, the filename written as a Make target into "include/config/auto.conf.cmd" was always the default one. Of course this doesn't make it work for the Kernel kbuild system, since there the filename is hardcoded at several places in the Makefiles. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-05-18 01:36:54 +02:00
[PATCH] Kill signed chars scripts/ is full of mismatches between char* params an signed char* arguments, and viceversa. gcc4 now complaints loud about this. Patch below deletes all those 'signed'. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 14:59:22 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] Kill signed chars scripts/ is full of mismatches between char* params an signed char* arguments, and viceversa. gcc4 now complaints loud about this. Patch below deletes all those 'signed'. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 14:59:22 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: factor out code in confdata.c This patch introduce no functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-10 20:01:56 +01:00
kconfig: annotate non-trivial fall-trough Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-05-31 12:30:26 -04:00
kconfig: factor out code in confdata.c This patch introduce no functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-10 20:01:56 +01:00
kconfig: silence warning when parsing auto.conf when a symbol has changed type When a symbol changes type from tristate to bool, and was previously set to 'm', a subsequent silentoldconfig would warn about inconsistency, such as: include/config/auto.conf:3014:warning: symbol value 'm' invalid for HOTPLUG_PCI_PCIE Seen by Linus with the merge in aa8032b (sequence to reproduce by Michal): git checkout 1fe0135 make mrproper make allmodconfig make silentoldconfig git checkout aa8032b make allmodconfig make silentoldconfig Since HOTPLUG_PCI_PCIE changed from tristate to bool in aa8032b, it was previously set to 'm' in auto.conf by the first allmodconfig+silentoldconfig, but then was set to 'y' by the second allmodconfig. Then the second silentoldconfig prints the warning. The warning in this case is a spurious warning, which happens at the time kconfig tries to detect symbols that have changed, to touch the empty header files in include/config used for dependency-tracking by make. Silence the warning when we read the old auto.conf file, since it is perfectly legit that a symbol changed type since the previous call. Thread in: http://marc.info/?l=linux-pci&m=137569198904000&w=2 Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-06 18:45:07 +02:00
kconfig: fix return code for invalid boolean symbol in conf_set_sym_val() Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-05-31 12:31:57 -04:00
kconfig: factor out code in confdata.c This patch introduce no functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-10 20:01:56 +01:00
kconfig: annotate non-trivial fall-trough Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-05-31 12:30:26 -04:00
kconfig: factor out code in confdata.c This patch introduce no functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-10 20:01:56 +01:00
kconfig: silence warning when parsing auto.conf when a symbol has changed type When a symbol changes type from tristate to bool, and was previously set to 'm', a subsequent silentoldconfig would warn about inconsistency, such as: include/config/auto.conf:3014:warning: symbol value 'm' invalid for HOTPLUG_PCI_PCIE Seen by Linus with the merge in aa8032b (sequence to reproduce by Michal): git checkout 1fe0135 make mrproper make allmodconfig make silentoldconfig git checkout aa8032b make allmodconfig make silentoldconfig Since HOTPLUG_PCI_PCIE changed from tristate to bool in aa8032b, it was previously set to 'm' in auto.conf by the first allmodconfig+silentoldconfig, but then was set to 'y' by the second allmodconfig. Then the second silentoldconfig prints the warning. The warning in this case is a spurious warning, which happens at the time kconfig tries to detect symbols that have changed, to touch the empty header files in include/config used for dependency-tracking by make. Silence the warning when we read the old auto.conf file, since it is perfectly legit that a symbol changed type since the previous call. Thread in: http://marc.info/?l=linux-pci&m=137569198904000&w=2 Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-06 18:45:07 +02:00
kconfig: factor out code in confdata.c This patch introduce no functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-10 20:01:56 +01:00
kconfig: annotate non-trivial fall-trough Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-05-31 12:30:26 -04:00
kconfig: factor out code in confdata.c This patch introduce no functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-10 20:01:56 +01:00
kconfig: silence warning when parsing auto.conf when a symbol has changed type When a symbol changes type from tristate to bool, and was previously set to 'm', a subsequent silentoldconfig would warn about inconsistency, such as: include/config/auto.conf:3014:warning: symbol value 'm' invalid for HOTPLUG_PCI_PCIE Seen by Linus with the merge in aa8032b (sequence to reproduce by Michal): git checkout 1fe0135 make mrproper make allmodconfig make silentoldconfig git checkout aa8032b make allmodconfig make silentoldconfig Since HOTPLUG_PCI_PCIE changed from tristate to bool in aa8032b, it was previously set to 'm' in auto.conf by the first allmodconfig+silentoldconfig, but then was set to 'y' by the second allmodconfig. Then the second silentoldconfig prints the warning. The warning in this case is a spurious warning, which happens at the time kconfig tries to detect symbols that have changed, to touch the empty header files in include/config used for dependency-tracking by make. Silence the warning when we read the old auto.conf file, since it is perfectly legit that a symbol changed type since the previous call. Thread in: http://marc.info/?l=linux-pci&m=137569198904000&w=2 Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-06 18:45:07 +02:00
kconfig: factor out code in confdata.c This patch introduce no functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-10 20:01:56 +01:00
kconfig: allow long lines in config file For some config options (CONFIG_EXTRA_FIRMWARE, for example), the length of a config file line can exceed the 1024 byte buffer. Switch from fgets to compat_getline to fix. compat_getline is an internally implimented getline work-alike for portability purposes. Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-07-13 11:27:12 -07:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow long lines in config file For some config options (CONFIG_EXTRA_FIRMWARE, for example), the length of a config file line can exceed the 1024 byte buffer. Switch from fgets to compat_getline to fix. compat_getline is an internally implimented getline work-alike for portability purposes. Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-07-13 11:27:12 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: add defconfig_list/module option This makes it possible to change two options which were hardcoded sofar. 1. Any symbol can now take the role of CONFIG_MODULES 2. The more useful option is to change the list of default file names, which kconfig uses to load the base configuration if .config isn't available. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:45 -07:00
kconfig: KCONFIG_OVERWRITECONFIG If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break symlinks when .config is a symlink to somewhere else. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:51 -07:00
kconfig: improve config load/save output During loading special case the first common case (.config), be silent about it and otherwise mark it as a change that requires saving. Instead output that the file has been changed. IOW if conf does nothing (special), it's silent. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:38 -07:00
[PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:07 -08:00
kconfig: fix MODULES-related bug in case of no .config There seems to be a kconfig bug due to MODULES not always being evaluated if no .config is found. Take the following Kconfig as an example: config MODULES def_bool y config FOO def_tristate m With no .config, the following configuration is generated: CONFIG_MODULES=y CONFIG_FOO=y With an empty .config, the following: CONFIG_MODULES=y CONFIG_FOO=m Tristate choice statements can also exhibit the problem, due to having an implicit rev_dep (select) containing "m". The problem is that MODULES is never evaluted in conf_read_simple() unless there's a .config. The following patch fixes this. Signed-off-by: Ulf Magnusson <ulfalizer.lkml@gmail.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-27 21:57:43 +02:00
kconfig: add defconfig_list/module option This makes it possible to change two options which were hardcoded sofar. 1. Any symbol can now take the role of CONFIG_MODULES 2. The more useful option is to change the list of default file names, which kconfig uses to load the base configuration if .config isn't available. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:45 -07:00
kconfig: fix MODULES-related bug in case of no .config There seems to be a kconfig bug due to MODULES not always being evaluated if no .config is found. Take the following Kconfig as an example: config MODULES def_bool y config FOO def_tristate m With no .config, the following configuration is generated: CONFIG_MODULES=y CONFIG_FOO=y With an empty .config, the following: CONFIG_MODULES=y CONFIG_FOO=m Tristate choice statements can also exhibit the problem, due to having an implicit rev_dep (select) containing "m". The problem is that MODULES is never evaluted in conf_read_simple() unless there's a .config. The following patch fixes this. Signed-off-by: Ulf Magnusson <ulfalizer.lkml@gmail.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-27 21:57:43 +02:00
kconfig: add defconfig_list/module option This makes it possible to change two options which were hardcoded sofar. 1. Any symbol can now take the role of CONFIG_MODULES 2. The more useful option is to change the list of default file names, which kconfig uses to load the base configuration if .config isn't available. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:45 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Allow frontends to display messages themselves Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-17 10:21:19 +02:00
kconfig: improve config load/save output During loading special case the first common case (.config), be silent about it and otherwise mark it as a change that requires saving. Instead output that the file has been changed. IOW if conf does nothing (special), it's silent. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:38 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: improve config load/save output During loading special case the first common case (.config), be silent about it and otherwise mark it as a change that requires saving. Instead output that the file has been changed. IOW if conf does nothing (special), it's silent. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:38 -07:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG" This reverts commit 8357b48549e17b3e4e402c7f977b65708922e60f. It breaks more stuff than it fixes. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-25 23:37:44 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: annotate non-trivial fall-trough Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-05-31 12:30:26 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow long lines in config file For some config options (CONFIG_EXTRA_FIRMWARE, for example), the length of a config file line can exceed the 1024 byte buffer. Switch from fgets to compat_getline to fix. compat_getline is an internally implimented getline work-alike for portability purposes. Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-07-13 11:27:12 -07:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: replace a `switch()' statement by a more flexible `if()' statement With the upcoming dynamical configuration prefix, we can no longer assume that the prefix will start by a 'C'. As such, we can no longer hardcode this value in the `case ...:', so replace the `switch() { ... }' statement by a more flexible 'if () { ... }' statement. Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-08-24 00:14:47 -04:00
kconfig: allow build-time definition of the internal config prefix Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-08-14 23:57:43 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow build-time definition of the internal config prefix Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-08-14 23:57:43 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: allow build-time definition of the internal config prefix Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-08-14 23:57:43 -04:00
kconfig: readd lost change count Commit f072181e6403b0fe2e2aa800a005497b748fd284 ("kconfig: drop the ""trying to assign nonexistent symbol" warning") simply dropped the warnings, but it does a little more than that, it also marks the current .config as needed saving, so add this back. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-29 05:27:11 +02:00
kconfig: Don't go out from read config loop when you read new symbol commit 8baefd30b5b0101aa07aa75da44a9eee881eed28 of linux-next replaced a `switch()' statement with some `if()' statements, but left `break's in the `switch()' statement untouched. This cause read config loop to exit and so "make oldconfig" is not much usable (see below). > $ make oldconfig ><snip> > scripts/kconfig/conf --oldconfig Kconfig > # > # using defaults found in /boot/config-2.6.34-ccs-r1 > # > * > * Restart config... > * > * > * General setup > * > Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [N/y/?] (NEW) (I've already have "CONFIG_EXPERIMENTAL=y" in the old config file. But that's not read here.) This patch should fix this problem. Signed-off-by: Naohiro Aota <naota@elisp.net> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-01 04:23:17 +09:00
kconfig: readd lost change count Commit f072181e6403b0fe2e2aa800a005497b748fd284 ("kconfig: drop the ""trying to assign nonexistent symbol" warning") simply dropped the warnings, but it does a little more than that, it also marks the current .config as needed saving, so add this back. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-29 05:27:11 +02:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: allow build-time definition of the internal config prefix Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-08-14 23:57:43 -04:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: allow overriding symbols Allow config variables in .config to override earlier ones in the same file. In other words, # CONFIG_SECURITY is not defined CONFIG_SECURITY=y will activate it. This makes it a bit easier to do cat original-config myconfig myconfig2 ... >.config; and run *config as expected. Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Randy Dunlap <randy.dunlap@oracle.com>
2008-01-03 23:33:44 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow build-time definition of the internal config prefix Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-08-14 23:57:43 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: support DOS line endings Kconfig doesn't currently handle config files with DOS line endings. While these are, of course, an abomination, etc, etc, it can be handy to not have to convert them first. It's also a tiny patch and even adds support for lines ending in just \r or even \n\r. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-07-13 12:54:07 -06:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: allow build-time definition of the internal config prefix Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-08-14 23:57:43 -04:00
kconfig: readd lost change count Commit f072181e6403b0fe2e2aa800a005497b748fd284 ("kconfig: drop the ""trying to assign nonexistent symbol" warning") simply dropped the warnings, but it does a little more than that, it also marks the current .config as needed saving, so add this back. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-29 05:27:11 +02:00
kconfig: Don't go out from read config loop when you read new symbol commit 8baefd30b5b0101aa07aa75da44a9eee881eed28 of linux-next replaced a `switch()' statement with some `if()' statements, but left `break's in the `switch()' statement untouched. This cause read config loop to exit and so "make oldconfig" is not much usable (see below). > $ make oldconfig ><snip> > scripts/kconfig/conf --oldconfig Kconfig > # > # using defaults found in /boot/config-2.6.34-ccs-r1 > # > * > * Restart config... > * > * > * General setup > * > Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [N/y/?] (NEW) (I've already have "CONFIG_EXPERIMENTAL=y" in the old config file. But that's not read here.) This patch should fix this problem. Signed-off-by: Naohiro Aota <naota@elisp.net> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-01 04:23:17 +09:00
kconfig: readd lost change count Commit f072181e6403b0fe2e2aa800a005497b748fd284 ("kconfig: drop the ""trying to assign nonexistent symbol" warning") simply dropped the warnings, but it does a little more than that, it also marks the current .config as needed saving, so add this back. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-29 05:27:11 +02:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: allow build-time definition of the internal config prefix Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-08-14 23:57:43 -04:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: allow overriding symbols Allow config variables in .config to override earlier ones in the same file. In other words, # CONFIG_SECURITY is not defined CONFIG_SECURITY=y will activate it. This makes it a bit easier to do cat original-config myconfig myconfig2 ... >.config; and run *config as expected. Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Randy Dunlap <randy.dunlap@oracle.com>
2008-01-03 23:33:44 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: factor out code in confdata.c This patch introduce no functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-10 20:01:56 +01:00
kconfig: replace a `switch()' statement by a more flexible `if()' statement With the upcoming dynamical configuration prefix, we can no longer assume that the prefix will start by a 'C'. As such, we can no longer hardcode this value in the `case ...:', so replace the `switch() { ... }' statement by a more flexible 'if () { ... }' statement. Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-08-24 00:14:47 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Don't go out from read config loop when you read new symbol commit 8baefd30b5b0101aa07aa75da44a9eee881eed28 of linux-next replaced a `switch()' statement with some `if()' statements, but left `break's in the `switch()' statement untouched. This cause read config loop to exit and so "make oldconfig" is not much usable (see below). > $ make oldconfig ><snip> > scripts/kconfig/conf --oldconfig Kconfig > # > # using defaults found in /boot/config-2.6.34-ccs-r1 > # > * > * Restart config... > * > * > * General setup > * > Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [N/y/?] (NEW) (I've already have "CONFIG_EXPERIMENTAL=y" in the old config file. But that's not read here.) This patch should fix this problem. Signed-off-by: Naohiro Aota <naota@elisp.net> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-01 04:23:17 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG" This reverts commit 8357b48549e17b3e4e402c7f977b65708922e60f. It breaks more stuff than it fixes. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-25 23:37:44 +02:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow overriding symbols Allow config variables in .config to override earlier ones in the same file. In other words, # CONFIG_SECURITY is not defined CONFIG_SECURITY=y will activate it. This makes it a bit easier to do cat original-config myconfig myconfig2 ... >.config; and run *config as expected. Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Randy Dunlap <randy.dunlap@oracle.com>
2008-01-03 23:33:44 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: rename E_OR & friends to avoid name clash We had macros named the same as a set of enumeration values. It is legal code but very confusing to read - so rename the macros from E_* to EXPR_* Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-07 21:09:55 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: allow long lines in config file For some config options (CONFIG_EXTRA_FIRMWARE, for example), the length of a config file line can exceed the 1024 byte buffer. Switch from fgets to compat_getline to fix. compat_getline is an internally implimented getline work-alike for portability purposes. Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-07-13 11:27:12 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] kconfig: preset config during all*config Allow to force setting of config variables during all{no,mod,yes,random}config to a specific value. For that conf first checks the KCONFIG_ALLCONFIG environment variable for a file name, otherwise it checks for all{no,mod,yes,random}.config and all.config. The file is a normal config file, which presets the config variables, but they are still subject to normal dependency checks. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:49 -08:00
kconfig: fix new choices being skipped upon config update Running `oldconfig' after any of the following configuration change: either trivial addition, such as: config A bool "A" choice prompt "Choice ?" depends on A config CHOICE_B bool "Choice B" config CHOICE_C bool "Choice C" endchoice or more tricky change: OLD KCONFIG | NEW KCONFIG | | config A | bool "A" | choice | choice prompt "Choice ?" | prompt "Choice ?" | config CHOICE_C | config CHOICE_C bool "Choice C" | bool "Choice C" | config CHOICE_D | config CHOICE_D bool "Choice D" | bool "Choice D" endchoice | | config CHOICE_E | bool "Choice E" | depends on A | endchoice will not cause the choice to be considered as NEW, and thus not be asked. The cause of this behavior is that choice's novelty are computed statically right after the saved configuration has been read. At this point, the new dependency's value is still unknown and asserted to be `no'. Moreover, no update to this decision is made afterward. Correct this by dynamically evaluating a choice's novelty, and removing the static evaluation. Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-01-23 17:29:05 -05:00
[PATCH] kconfig: preset config during all*config Allow to force setting of config variables during all{no,mod,yes,random}config to a specific value. For that conf first checks the KCONFIG_ALLCONFIG environment variable for a file name, otherwise it checks for all{no,mod,yes,random}.config and all.config. The file is a normal config file, which presets the config variables, but they are still subject to normal dependency checks. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:49 -08:00
[PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:07 -08:00
kconfig: improve config load/save output During loading special case the first common case (.config), be silent about it and otherwise mark it as a change that requires saving. Instead output that the file has been changed. IOW if conf does nothing (special), it's silent. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:38 -07:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
[PATCH] kconfig: preset config during all*config Allow to force setting of config variables during all{no,mod,yes,random}config to a specific value. For that conf first checks the KCONFIG_ALLCONFIG environment variable for a file name, otherwise it checks for all{no,mod,yes,random}.config and all.config. The file is a normal config file, which presets the config variables, but they are still subject to normal dependency checks. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:49 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
kconfig: fix new choices being skipped upon config update Running `oldconfig' after any of the following configuration change: either trivial addition, such as: config A bool "A" choice prompt "Choice ?" depends on A config CHOICE_B bool "Choice B" config CHOICE_C bool "Choice C" endchoice or more tricky change: OLD KCONFIG | NEW KCONFIG | | config A | bool "A" | choice | choice prompt "Choice ?" | prompt "Choice ?" | config CHOICE_C | config CHOICE_C bool "Choice C" | bool "Choice C" | config CHOICE_D | config CHOICE_D bool "Choice D" | bool "Choice D" endchoice | | config CHOICE_E | bool "Choice E" | depends on A | endchoice will not cause the choice to be considered as NEW, and thus not be asked. The cause of this behavior is that choice's novelty are computed statically right after the saved configuration has been read. At this point, the new dependency's value is still unknown and asserted to be `no'. Moreover, no update to this decision is made afterward. Correct this by dynamically evaluating a choice's novelty, and removing the static evaluation. Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-01-23 17:29:05 -05:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
kconfig: allow multiple default values per symbol Extend struct symbol to allow storing multiple default values, which can be used to hold multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:41 -07:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
kconfig: fix new choices being skipped upon config update Running `oldconfig' after any of the following configuration change: either trivial addition, such as: config A bool "A" choice prompt "Choice ?" depends on A config CHOICE_B bool "Choice B" config CHOICE_C bool "Choice C" endchoice or more tricky change: OLD KCONFIG | NEW KCONFIG | | config A | bool "A" | choice | choice prompt "Choice ?" | prompt "Choice ?" | config CHOICE_C | config CHOICE_C bool "Choice C" | bool "Choice C" | config CHOICE_D | config CHOICE_D bool "Choice D" | bool "Choice D" endchoice | | config CHOICE_E | bool "Choice E" | depends on A | endchoice will not cause the choice to be considered as NEW, and thus not be asked. The cause of this behavior is that choice's novelty are computed statically right after the saved configuration has been read. At this point, the new dependency's value is still unknown and asserted to be `no'. Moreover, no update to this decision is made afterward. Correct this by dynamically evaluating a choice's novelty, and removing the static evaluation. Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-01-23 17:29:05 -05:00
kconfig: annotate non-trivial fall-trough Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-05-31 12:30:26 -04:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
kconfig: allow multiple default values per symbol Extend struct symbol to allow storing multiple default values, which can be used to hold multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:41 -07:00
kconfig: fix new choices being skipped upon config update Running `oldconfig' after any of the following configuration change: either trivial addition, such as: config A bool "A" choice prompt "Choice ?" depends on A config CHOICE_B bool "Choice B" config CHOICE_C bool "Choice C" endchoice or more tricky change: OLD KCONFIG | NEW KCONFIG | | config A | bool "A" | choice | choice prompt "Choice ?" | prompt "Choice ?" | config CHOICE_C | config CHOICE_C bool "Choice C" | bool "Choice C" | config CHOICE_D | config CHOICE_D bool "Choice D" | bool "Choice D" endchoice | | config CHOICE_E | bool "Choice E" | depends on A | endchoice will not cause the choice to be considered as NEW, and thus not be asked. The cause of this behavior is that choice's novelty are computed statically right after the saved configuration has been read. At this point, the new dependency's value is still unknown and asserted to be `no'. Moreover, no update to this decision is made afterward. Correct this by dynamically evaluating a choice's novelty, and removing the static evaluation. Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-01-23 17:29:05 -05:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
kconfig: fix new choices being skipped upon config update Running `oldconfig' after any of the following configuration change: either trivial addition, such as: config A bool "A" choice prompt "Choice ?" depends on A config CHOICE_B bool "Choice B" config CHOICE_C bool "Choice C" endchoice or more tricky change: OLD KCONFIG | NEW KCONFIG | | config A | bool "A" | choice | choice prompt "Choice ?" | prompt "Choice ?" | config CHOICE_C | config CHOICE_C bool "Choice C" | bool "Choice C" | config CHOICE_D | config CHOICE_D bool "Choice D" | bool "Choice D" endchoice | | config CHOICE_E | bool "Choice E" | depends on A | endchoice will not cause the choice to be considered as NEW, and thus not be asked. The cause of this behavior is that choice's novelty are computed statically right after the saved configuration has been read. At this point, the new dependency's value is still unknown and asserted to be `no'. Moreover, no update to this decision is made afterward. Correct this by dynamically evaluating a choice's novelty, and removing the static evaluation. Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-01-23 17:29:05 -05:00
[PATCH] kconfig: stricter error checking for .config Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:34:54 -08:00
kconfig: reset generated values only if Kconfig and .config agree. Normally generated values (Kconfig entries without a prompt) are cleared as they are regenerated anyway and so they appear as new should they become visible and defaults work as expected (once a value is set defaults aren't used anymore). The detection whether a value is generated or not is only based on its visibility status, which can quickly change for a lot of symbols by just removing a single line from .config or adding a dependency to Kconfig as you noticed. The patch now suppresses this logic when .config and Kconfig aren't in sync and .config needs to be updated, so that you can remove now a random value from .config and oldconfig won't reask for many other values. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-09 11:43:58 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: reset generated values only if Kconfig and .config agree. Normally generated values (Kconfig entries without a prompt) are cleared as they are regenerated anyway and so they appear as new should they become visible and defaults work as expected (once a value is set defaults aren't used anymore). The detection whether a value is generated or not is only based on its visibility status, which can quickly change for a lot of symbols by just removing a single line from .config or adding a dependency to Kconfig as you noticed. The patch now suppresses this logic when .config and Kconfig aren't in sync and .config needs to be updated, so that you can remove now a random value from .config and oldconfig won't reask for many other values. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-09 11:43:58 -07:00
kconfig: allow loading multiple configurations Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: reset generated values only if Kconfig and .config agree. Normally generated values (Kconfig entries without a prompt) are cleared as they are regenerated anyway and so they appear as new should they become visible and defaults work as expected (once a value is set defaults aren't used anymore). The detection whether a value is generated or not is only based on its visibility status, which can quickly change for a lot of symbols by just removing a single line from .config or adding a dependency to Kconfig as you noticed. The patch now suppresses this logic when .config and Kconfig aren't in sync and .config needs to be updated, so that you can remove now a random value from .config and oldconfig won't reask for many other values. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-09 11:43:58 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:07 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: use xfwrite wrapper function to silence warnings Use the xfwrite wrapper function defined in lkc.h to check the return value of fwrite and silence these warnings. HOSTCC scripts/kconfig/zconf.tab.o scripts/kconfig/zconf.tab.c: In function 'header_print_comment': /usr/src/lto/scripts/kconfig/confdata.c:551:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result scripts/kconfig/zconf.tab.c: In function 'kconfig_print_comment': /usr/src/lto/scripts/kconfig/confdata.c:467:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result Signed-off-by: Peter Foley <pefoley2@verizon.net> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-10-22 10:48:49 -04:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: nuke second argument of conf_write_symbol() Replacing S_TRISTATE by S_BOOLEAN is a no-op for conf_write_symbol(). Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: Fix unused variable warning in conf_write()] Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-05 01:33:16 -05:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: fix missing "0x" prefix from S_HEX symbol in autoconf.h The specialized printer for headers (espectially autoconf.h) is missing fixup code for S_HEX symbol's "0x" prefix. As long as kconfig does not warn for such missing prefix, this code is needed. Fix this. In the same time, fix some nits in `header_print_symbol()'. Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Broken-by: Arnaud Lacombe <lacombar@gmail.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Reported-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-14 15:31:07 -04:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: Introduce IS_ENABLED(), IS_BUILTIN() and IS_MODULE() Replace the config_is_*() macros with a variant that allows for grepping for usage of CONFIG_* options in the code. Usage: if (IS_ENABLED(CONFIG_NUMA)) or #if IS_ENABLED(CONFIG_NUMA) The IS_ENABLED() macro evaluates to 1 if the argument is set (to either 'y' or 'm'), IS_BUILTIN() tests if the option is 'y' and IS_MODULE() test if the option is 'm'. Only boolean and tristate options are supported. Reviewed-by: Arnaud Lacombe <lacombar@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-20 17:38:57 +02:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: fix missing "0x" prefix from S_HEX symbol in autoconf.h The specialized printer for headers (espectially autoconf.h) is missing fixup code for S_HEX symbol's "0x" prefix. As long as kconfig does not warn for such missing prefix, this code is needed. Fix this. In the same time, fix some nits in `header_print_symbol()'. Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Broken-by: Arnaud Lacombe <lacombar@gmail.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Reported-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-14 15:31:07 -04:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: Introduce IS_ENABLED(), IS_BUILTIN() and IS_MODULE() Replace the config_is_*() macros with a variant that allows for grepping for usage of CONFIG_* options in the code. Usage: if (IS_ENABLED(CONFIG_NUMA)) or #if IS_ENABLED(CONFIG_NUMA) The IS_ENABLED() macro evaluates to 1 if the argument is set (to either 'y' or 'm'), IS_BUILTIN() tests if the option is 'y' and IS_MODULE() test if the option is 'm'. Only boolean and tristate options are supported. Reviewed-by: Arnaud Lacombe <lacombar@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-20 17:38:57 +02:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: fix missing "0x" prefix from S_HEX symbol in autoconf.h The specialized printer for headers (espectially autoconf.h) is missing fixup code for S_HEX symbol's "0x" prefix. As long as kconfig does not warn for such missing prefix, this code is needed. Fix this. In the same time, fix some nits in `header_print_symbol()'. Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Broken-by: Arnaud Lacombe <lacombar@gmail.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Reported-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-14 15:31:07 -04:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: use xfwrite wrapper function to silence warnings Use the xfwrite wrapper function defined in lkc.h to check the return value of fwrite and silence these warnings. HOSTCC scripts/kconfig/zconf.tab.o scripts/kconfig/zconf.tab.c: In function 'header_print_comment': /usr/src/lto/scripts/kconfig/confdata.c:551:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result scripts/kconfig/zconf.tab.c: In function 'kconfig_print_comment': /usr/src/lto/scripts/kconfig/confdata.c:467:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result Signed-off-by: Peter Foley <pefoley2@verizon.net> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-10-22 10:48:49 -04:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: add savedefconfig savedefconfig will save a minimal config to a file named "defconfig". The config symbols are saved in the same order as they appear in the menu structure so it should be possible to map them to the relevant menus if desired. The implementation was tested against several minimal configs for arm which was created using brute-force. There was one regression related to default numbers which had their valid range further limited by another symbol. Sample: config FOO int "foo" default 4 config BAR int "bar" range 0 FOO If FOO is set to 3 then BAR cannot take a value higher than 3. But the current implementation will set BAR equal to 4. This is seldomly used and the final configuration is OK, and the fix was non-trivial. So it was documented in the code and left as is. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:34 +02:00
kconfig: fix savedefconfig with choice marked optional savedefconfig failed to save the correct minimal config when it encountered a choice marked optional. Consider following minimal configuration: $cat Kconfig choice prompt "choice" optional config A bool "a" config B bool "b" endchoice $cat .config | grep -v ^# CONFIG_A=y $conf --savedefconfig=defconfig Kconfig would before this fix result in an empty file, because kconfig would assume that CONFIG_A=y is a default value. But because the choice is optional the default is that both A and B are =n. Fix so we handle optional choices correct. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-14 23:22:16 +02:00
kconfig: add savedefconfig savedefconfig will save a minimal config to a file named "defconfig". The config symbols are saved in the same order as they appear in the menu structure so it should be possible to map them to the relevant menus if desired. The implementation was tested against several minimal configs for arm which was created using brute-force. There was one regression related to default numbers which had their valid range further limited by another symbol. Sample: config FOO int "foo" default 4 config BAR int "bar" range 0 FOO If FOO is set to 3 then BAR cannot take a value higher than 3. But the current implementation will set BAR equal to 4. This is seldomly used and the final configuration is OK, and the fix was non-trivial. So it was documented in the code and left as is. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:34 +02:00
kconfig: fix savedefconfig with choice marked optional savedefconfig failed to save the correct minimal config when it encountered a choice marked optional. Consider following minimal configuration: $cat Kconfig choice prompt "choice" optional config A bool "a" config B bool "b" endchoice $cat .config | grep -v ^# CONFIG_A=y $conf --savedefconfig=defconfig Kconfig would before this fix result in an empty file, because kconfig would assume that CONFIG_A=y is a default value. But because the choice is optional the default is that both A and B are =n. Fix so we handle optional choices correct. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-14 23:22:16 +02:00
kconfig: fix savedefconfig for tristate choices savedefconfig failed to save choice symbols equal to 'y' for tristate choices. This resulted in this value being lost. In particular is fixes an issue where make ARCH=avr32 atngw100_defconfig make ARCH=avr32 savedefconfig cp defconfig arch/avr32/configs/atngw100_defconfig make ARCH=avr32 atngw100_defconfig diff -u .config .config.old failed to produce an identical .config. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 09:11:51 +02:00
kconfig: add savedefconfig savedefconfig will save a minimal config to a file named "defconfig". The config symbols are saved in the same order as they appear in the menu structure so it should be possible to map them to the relevant menus if desired. The implementation was tested against several minimal configs for arm which was created using brute-force. There was one regression related to default numbers which had their valid range further limited by another symbol. Sample: config FOO int "foo" default 4 config BAR int "bar" range 0 FOO If FOO is set to 3 then BAR cannot take a value higher than 3. But the current implementation will set BAR equal to 4. This is seldomly used and the final configuration is OK, and the fix was non-trivial. So it was documented in the code and left as is. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:34 +02:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: add savedefconfig savedefconfig will save a minimal config to a file named "defconfig". The config symbols are saved in the same order as they appear in the menu structure so it should be possible to map them to the relevant menus if desired. The implementation was tested against several minimal configs for arm which was created using brute-force. There was one regression related to default numbers which had their valid range further limited by another symbol. Sample: config FOO int "foo" default 4 config BAR int "bar" range 0 FOO If FOO is set to 3 then BAR cannot take a value higher than 3. But the current implementation will set BAR equal to 4. This is seldomly used and the final configuration is OK, and the fix was non-trivial. So it was documented in the code and left as is. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:34 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Use PATH_MAX instead of 128 for path buffer sizes. This prevents the buffers being overflowed when using a config file with a long name. PATH_MAX is used elsewhere in the same file, so use it here as well. Signed-off-by: Will Newton <will.newton@imgtec.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-22 15:59:13 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: KCONFIG_OVERWRITECONFIG If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break symlinks when .config is a symlink to somewhere else. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:51 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: KCONFIG_OVERWRITECONFIG If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break symlinks when .config is a symlink to somewhere else. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:51 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: KCONFIG_OVERWRITECONFIG If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break symlinks when .config is a symlink to somewhere else. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:51 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: KCONFIG_OVERWRITECONFIG If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break symlinks when .config is a symlink to somewhere else. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:51 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: KCONFIG_OVERWRITECONFIG If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break symlinks when .config is a symlink to somewhere else. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:51 -07:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] kconfig: new function "bool conf_get_changed(void)" Run "make xconfig" on a freshly untarred kernel-tree. Look at the floppy disk icon of the qt application, that has just started: Its in a normal, active state. Mouse click on it: .config is being saved. This patch series changes things so taht after the mouse click on the floppy disk icon, the icon is greyed out. If you mouse click on it now, nothing happens. If you change some CONFIG_*, the floppy disk icon returns to "active state", that is, if you mouse click it now, .config is written. This patch: Returns sym_change_count to reflect the .config's change state. All read only accesses of sym_change_count are replaced by calls to conf_get_changed() . mconfig.c is manipulated to ask for saving only when conf_get_changed() returned true. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:06 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: KCONFIG_OVERWRITECONFIG If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break symlinks when .config is a symlink to somewhere else. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:51 -07:00
kconfig: fix saving alternate kconfig file in parent dir This fixes bugzilla entry: 7182 http://bugzilla.kernel.org/show_bug.cgi?id=7182 With this patch we no longer append the directory part twice before saving the config file. This patch has been sent to Roman Zippel for review with no feedback. It is so obviously simple that this should be OK to apply it anyway. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-10-01 11:48:53 +02:00
kconfig: KCONFIG_OVERWRITECONFIG If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break symlinks when .config is a symlink to somewhere else. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:51 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: Allow frontends to display messages themselves Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-17 10:21:19 +02:00
kconfig: improve config load/save output During loading special case the first common case (.config), be silent about it and otherwise mark it as a change that requires saving. Instead output that the file has been changed. IOW if conf does nothing (special), it's silent. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:38 -07:00
[PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:07 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
kbuild: add static to prototypes Warnings found via gcc -Wmissing-prototypes. Signed-off-by: Trevor Keith <tsrk@tsrk.net> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-18 12:49:23 -07:00
kconfig: integrate split config into silentoldconfig Now that kconfig can load multiple configurations, it becomes simple to integrate the split config step, by simply comparing the new .config file with the old auto.conf (and then saving the new auto.conf). A nice side effect is that this saves a bit of disk space and cache, as no data needs to be read from or saved into the splitted config files anymore (e.g. include/config is now 648KB instead of 5.2MB). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: do not hardcode "include/config/auto.conf" filename Regardless of KCONFIG_AUTOCONFIG, the filename written as a Make target into "include/config/auto.conf.cmd" was always the default one. Of course this doesn't make it work for the Kernel kbuild system, since there the filename is hardcoded at several places in the Makefiles. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-05-18 01:36:54 +02:00
kconfig: Use PATH_MAX instead of 128 for path buffer sizes. This prevents the buffers being overflowed when using a config file with a long name. PATH_MAX is used elsewhere in the same file, so use it here as well. Signed-off-by: Will Newton <will.newton@imgtec.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-22 15:59:13 +01:00
kconfig: integrate split config into silentoldconfig Now that kconfig can load multiple configurations, it becomes simple to integrate the split config step, by simply comparing the new .config file with the old auto.conf (and then saving the new auto.conf). A nice side effect is that this saves a bit of disk space and cache, as no data needs to be read from or saved into the splitted config files anymore (e.g. include/config is now 648KB instead of 5.2MB). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: do not hardcode "include/config/auto.conf" filename Regardless of KCONFIG_AUTOCONFIG, the filename written as a Make target into "include/config/auto.conf.cmd" was always the default one. Of course this doesn't make it work for the Kernel kbuild system, since there the filename is hardcoded at several places in the Makefiles. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-05-18 01:36:54 +02:00
kconfig: integrate split config into silentoldconfig Now that kconfig can load multiple configurations, it becomes simple to integrate the split config step, by simply comparing the new .config file with the old auto.conf (and then saving the new auto.conf). A nice side effect is that this saves a bit of disk space and cache, as no data needs to be read from or saved into the splitted config files anymore (e.g. include/config is now 648KB instead of 5.2MB). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
kconfig: do not hardcode "include/config/auto.conf" filename Regardless of KCONFIG_AUTOCONFIG, the filename written as a Make target into "include/config/auto.conf.cmd" was always the default one. Of course this doesn't make it work for the Kernel kbuild system, since there the filename is hardcoded at several places in the Makefiles. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-05-18 01:36:54 +02:00
kbuild: generate modules.builtin To make it easier for module-init-tools and scripts like mkinitrd to distinguish builtin and missing modules, install a modules.builtin file listing all builtin modules. This is done by generating an additional config file (tristate.conf) with tristate options set to uppercase 'Y' or 'M'. If we source that config file, the builtin modules appear in obj-Y. Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-07 16:38:33 +01:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
kconfig: integrate split config into silentoldconfig Now that kconfig can load multiple configurations, it becomes simple to integrate the split config step, by simply comparing the new .config file with the old auto.conf (and then saving the new auto.conf). A nice side effect is that this saves a bit of disk space and cache, as no data needs to be read from or saved into the splitted config files anymore (e.g. include/config is now 648KB instead of 5.2MB). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
kconfig: integrate split config into silentoldconfig Now that kconfig can load multiple configurations, it becomes simple to integrate the split config step, by simply comparing the new .config file with the old auto.conf (and then saving the new auto.conf). A nice side effect is that this saves a bit of disk space and cache, as no data needs to be read from or saved into the splitted config files anymore (e.g. include/config is now 648KB instead of 5.2MB). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:42 -07:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
kbuild: generate modules.builtin To make it easier for module-init-tools and scripts like mkinitrd to distinguish builtin and missing modules, install a modules.builtin file listing all builtin modules. This is done by generating an additional config file (tristate.conf) with tristate options set to uppercase 'Y' or 'M'. If we source that config file, the builtin modules appear in obj-Y. Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-07 16:38:33 +01:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
kbuild: generate modules.builtin To make it easier for module-init-tools and scripts like mkinitrd to distinguish builtin and missing modules, install a modules.builtin file listing all builtin modules. This is done by generating an additional config file (tristate.conf) with tristate options set to uppercase 'Y' or 'M'. If we source that config file, the builtin modules appear in obj-Y. Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-07 16:38:33 +01:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
Revert "kconfig: fix __enabled_ macros definition for invisible and un-selected symbols" This reverts commit 953742c8fe8ac45be453fee959d7be40cd89f920. Dumping two lines into autoconf.h for all existing Kconfig options results in a giant file (~16k lines) we have to process each time we compile something. We've weaned IS_ENABLED() and similar off of requiring the __enabled_ definitions so now we can revert the change which caused all the extra lines. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-12 19:46:33 -04:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
Revert "kconfig: fix __enabled_ macros definition for invisible and un-selected symbols" This reverts commit 953742c8fe8ac45be453fee959d7be40cd89f920. Dumping two lines into autoconf.h for all existing Kconfig options results in a giant file (~16k lines) we have to process each time we compile something. We've weaned IS_ENABLED() and similar off of requiring the __enabled_ definitions so now we can revert the change which caused all the extra lines. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-12 19:46:33 -04:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: code refactoring in confdata.c Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-31 23:35:33 +02:00
kconfig: introduce specialized printer Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-15 23:42:09 -04:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
kbuild: generate modules.builtin To make it easier for module-init-tools and scripts like mkinitrd to distinguish builtin and missing modules, install a modules.builtin file listing all builtin modules. This is done by generating an additional config file (tristate.conf) with tristate options set to uppercase 'Y' or 'M'. If we source that config file, the builtin modules appear in obj-Y. Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-07 16:38:33 +01:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
kbuild: move autoconf.h to include/generated Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-10-18 00:49:24 +02:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
kbuild: generate modules.builtin To make it easier for module-init-tools and scripts like mkinitrd to distinguish builtin and missing modules, install a modules.builtin file listing all builtin modules. This is done by generating an additional config file (tristate.conf) with tristate options set to uppercase 'Y' or 'M'. If we source that config file, the builtin modules appear in obj-Y. Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-07 16:38:33 +01:00
kconfig: do not hardcode "include/config/auto.conf" filename Regardless of KCONFIG_AUTOCONFIG, the filename written as a Make target into "include/config/auto.conf.cmd" was always the default one. Of course this doesn't make it work for the Kernel kbuild system, since there the filename is hardcoded at several places in the Makefiles. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-05-18 01:36:54 +02:00
kconfig: fix .config dependencies This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 22:12:39 -07:00
[PATCH] kconfig: new function "bool conf_get_changed(void)" Run "make xconfig" on a freshly untarred kernel-tree. Look at the floppy disk icon of the qt application, that has just started: Its in a normal, active state. Mouse click on it: .config is being saved. This patch series changes things so taht after the mouse click on the floppy disk icon, the icon is greyed out. If you mouse click on it now, nothing happens. If you change some CONFIG_*, the floppy disk icon returns to "active state", that is, if you mouse click it now, .config is written. This patch: Returns sym_change_count to reflect the .config's change state. All read only accesses of sym_change_count are replaced by calls to conf_get_changed() . mconfig.c is manipulated to ask for saving only when conf_get_changed() returned true. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:06 -08:00
[PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:07 -08:00
[PATCH] kconfig: add "void conf_set_changed_callback(void (*fn)(void))", use it in qconf.cc Added function sets "void (*conf_changed_callback)(void)". Call it, if .config's changed state changes. Use above in qconf.cc to set gui's save-widget's sensitvity. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:08 -08:00
[PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:07 -08:00
[PATCH] kconfig: add "void conf_set_changed_callback(void (*fn)(void))", use it in qconf.cc Added function sets "void (*conf_changed_callback)(void)". Call it, if .config's changed state changes. Use above in qconf.cc to set gui's save-widget's sensitvity. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:08 -08:00
[PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:07 -08:00
[PATCH] kconfig: add "void conf_set_changed_callback(void (*fn)(void))", use it in qconf.cc Added function sets "void (*conf_changed_callback)(void)". Call it, if .config's changed state changes. Use above in qconf.cc to set gui's save-widget's sensitvity. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:08 -08:00
[PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:07 -08:00
[PATCH] kconfig: add "void conf_set_changed_callback(void (*fn)(void))", use it in qconf.cc Added function sets "void (*conf_changed_callback)(void)". Call it, if .config's changed state changes. Use above in qconf.cc to set gui's save-widget's sensitvity. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:08 -08:00
[PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:07 -08:00
[PATCH] kconfig: new function "bool conf_get_changed(void)" Run "make xconfig" on a freshly untarred kernel-tree. Look at the floppy disk icon of the qt application, that has just started: Its in a normal, active state. Mouse click on it: .config is being saved. This patch series changes things so taht after the mouse click on the floppy disk icon, the icon is greyed out. If you mouse click on it now, nothing happens. If you change some CONFIG_*, the floppy disk icon returns to "active state", that is, if you mouse click it now, .config is written. This patch: Returns sym_change_count to reflect the .config's change state. All read only accesses of sym_change_count are replaced by calls to conf_get_changed() . mconfig.c is manipulated to ask for saving only when conf_get_changed() returned true. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:06 -08:00
[PATCH] kconfig: add "void conf_set_changed_callback(void (*fn)(void))", use it in qconf.cc Added function sets "void (*conf_changed_callback)(void)". Call it, if .config's changed state changes. Use above in qconf.cc to set gui's save-widget's sensitvity. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 00:34:08 -08:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
kconfig: loop as long as we changed some symbols in randconfig Because of choice-in-a-choice constructs, it can happen that not all symbols are assigned a value during randconfig, leading in rare cases to this situation: ---8<--- choice-in-choice.in choice bool "A/B/C" config A bool "A" config B bool "B" if B choice bool "E/F" config E bool "E" config F bool "F" endchoice endif # B config C bool "C" endchoice ---8<--- $ ./scripts/kconfig/conf --randconfig choice-in-choice.in [--SNIP--] $ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null [--SNIP--] A/B/C 1. A (A) > 2. B (B) 3. C (C) choice[1-3]: 2 E/F > 1. E (E) (NEW) 2. F (F) (NEW) choice[1-2]: aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. Fix this by looping in randconfig for as long as some symbol gets assigned a value. Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP), which uses this choice-in-a-choice construct, and exhibits this problem. The example above is just a stripped-down minimalist test-case. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-28 22:36:38 +02:00
kconfig: fix tristate choice with minimal config If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Arve Hjønnevåg <arve@android.com> Tested-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 09:11:52 +02:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
kconfig: fix tristate choice with minimal config If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Arve Hjønnevåg <arve@android.com> Tested-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 09:11:52 +02:00
kconfig: fix typos Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-05 01:41:16 -05:00
kconfig: fix tristate choice with minimal config If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Arve Hjønnevåg <arve@android.com> Tested-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 09:11:52 +02:00
kconfig: loop as long as we changed some symbols in randconfig Because of choice-in-a-choice constructs, it can happen that not all symbols are assigned a value during randconfig, leading in rare cases to this situation: ---8<--- choice-in-choice.in choice bool "A/B/C" config A bool "A" config B bool "B" if B choice bool "E/F" config E bool "E" config F bool "F" endchoice endif # B config C bool "C" endchoice ---8<--- $ ./scripts/kconfig/conf --randconfig choice-in-choice.in [--SNIP--] $ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null [--SNIP--] A/B/C 1. A (A) > 2. B (B) 3. C (C) choice[1-3]: 2 E/F > 1. E (E) (NEW) 2. F (F) (NEW) choice[1-2]: aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. Fix this by looping in randconfig for as long as some symbol gets assigned a value. Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP), which uses this choice-in-a-choice construct, and exhibits this problem. The example above is just a stripped-down minimalist test-case. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-28 22:36:38 +02:00
kconfig: fix tristate choice with minimal config If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Arve Hjønnevåg <arve@android.com> Tested-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 09:11:52 +02:00
kconfig/conf: fix randconfig setting multiple symbols in a choice Currently, randconfig may set more than one symbol in a given choice. Given this config file: config A bool "A" if A choice bool "B/C/D" config B bool "B" config C bool "C" config D bool "D" endchoice endif # A Then randconfig generates such .config files (case where A is not set is not shown below for brevity), and where only the right-most .config is valid: CONFIG_A=y CONFIG_A=y CONFIG_A=y CONFIG_B=y CONFIG_B=y CONFIG_B=y CONFIG_C=y # CONFIG_C is not set # CONFIG_C is not set # CONFIG_D is not set CONFIG_D=y # CONFIG_D is not set That is, in a randomised choice, the first symbol is always selected, and at most one other symbol may be selected. This is due to symbol randomised in a choice not being properly flagged as having a value. Fix that by flagging those symbols adequately: have a user-defined value, and be not valid (to force recalculation of the symbol). Note: if the choice is not conditional, then the randomisation is properly done. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> [yann.morin.1998@free.fr: independently re-done the same patch as Matthieu, as pointed out by Sedat] Cc: Arnaud Lacombe <lacombar@gmail.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-28 17:33:15 +02:00
kconfig: fix tristate choice with minimal config If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Arve Hjønnevåg <arve@android.com> Tested-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 09:11:52 +02:00
kconfig: loop as long as we changed some symbols in randconfig Because of choice-in-a-choice constructs, it can happen that not all symbols are assigned a value during randconfig, leading in rare cases to this situation: ---8<--- choice-in-choice.in choice bool "A/B/C" config A bool "A" config B bool "B" if B choice bool "E/F" config E bool "E" config F bool "F" endchoice endif # B config C bool "C" endchoice ---8<--- $ ./scripts/kconfig/conf --randconfig choice-in-choice.in [--SNIP--] $ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null [--SNIP--] A/B/C 1. A (A) > 2. B (B) 3. C (C) choice[1-3]: 2 E/F > 1. E (E) (NEW) 2. F (F) (NEW) choice[1-2]: aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. Fix this by looping in randconfig for as long as some symbol gets assigned a value. Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP), which uses this choice-in-a-choice construct, and exhibits this problem. The example above is just a stripped-down minimalist test-case. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-28 22:36:38 +02:00
kconfig: fix tristate choice with minimal config If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Arve Hjønnevåg <arve@android.com> Tested-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 09:11:52 +02:00
kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on The defconfig and Kconfig combination below, which is based on 3.10-rc4 Kconfigs, resulted in several options getting set to "m" instead of "y". defconfig.choice: ---8<--- CONFIG_MODULES=y CONFIG_USB_ZERO=y ---8<--- Kconfig.choice: ---8<--- menuconfig MODULES bool "Enable loadable module support" config CONFIGFS_FS tristate "Userspace-driven configuration filesystem" config OCFS2_FS tristate "OCFS2 file system support" depends on CONFIGFS_FS select CRC32 config USB_LIBCOMPOSITE tristate select CONFIGFS_FS choice tristate "USB Gadget Drivers" default USB_ETH config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" select USB_LIBCOMPOSITE config USB_ETH tristate "Ethernet Gadget (with CDC Ethernet support)" select USB_LIBCOMPOSITE endchoice config CRC32 tristate "CRC32/CRC32c functions" default y choice prompt "CRC32 implementation" depends on CRC32 default CRC32_SLICEBY8 config CRC32_SLICEBY8 bool "Slice by 8 bytes" endchoice ---8<--- $ scripts/kconfig/conf --defconfig=defconfig.choice Kconfig.choice would result in: .config: ---8<--- CONFIG_MODULES=y CONFIG_CONFIGFS_FS=m CONFIG_USB_LIBCOMPOSITE=m CONFIG_USB_ZERO=m CONFIG_CRC32=y CONFIG_CRC32_SLICEBY8=y ---8<--- when the expected result would be: .config: ---8<--- CONFIG_MODULES=y CONFIG_CONFIGFS_FS=y CONFIG_USB_LIBCOMPOSITE=y CONFIG_USB_ZERO=y CONFIG_CRC32=y CONFIG_CRC32_SLICEBY8=y ---8<--- Signed-off-by: Arve Hjønnevåg <arve@android.com> [yann.morin.1998@free.fr: add the resulting .config to commit log, remove unneeded USB_GADGET from the defconfig] Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-06 20:37:00 -07:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
kconfig: fix tristate choice with minimal config If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Arve Hjønnevåg <arve@android.com> Tested-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 09:11:52 +02:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
kconfig: fix tristate choice with minimal config If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Arve Hjønnevåg <arve@android.com> Tested-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 09:11:52 +02:00
kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on The defconfig and Kconfig combination below, which is based on 3.10-rc4 Kconfigs, resulted in several options getting set to "m" instead of "y". defconfig.choice: ---8<--- CONFIG_MODULES=y CONFIG_USB_ZERO=y ---8<--- Kconfig.choice: ---8<--- menuconfig MODULES bool "Enable loadable module support" config CONFIGFS_FS tristate "Userspace-driven configuration filesystem" config OCFS2_FS tristate "OCFS2 file system support" depends on CONFIGFS_FS select CRC32 config USB_LIBCOMPOSITE tristate select CONFIGFS_FS choice tristate "USB Gadget Drivers" default USB_ETH config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" select USB_LIBCOMPOSITE config USB_ETH tristate "Ethernet Gadget (with CDC Ethernet support)" select USB_LIBCOMPOSITE endchoice config CRC32 tristate "CRC32/CRC32c functions" default y choice prompt "CRC32 implementation" depends on CRC32 default CRC32_SLICEBY8 config CRC32_SLICEBY8 bool "Slice by 8 bytes" endchoice ---8<--- $ scripts/kconfig/conf --defconfig=defconfig.choice Kconfig.choice would result in: .config: ---8<--- CONFIG_MODULES=y CONFIG_CONFIGFS_FS=m CONFIG_USB_LIBCOMPOSITE=m CONFIG_USB_ZERO=m CONFIG_CRC32=y CONFIG_CRC32_SLICEBY8=y ---8<--- when the expected result would be: .config: ---8<--- CONFIG_MODULES=y CONFIG_CONFIGFS_FS=y CONFIG_USB_LIBCOMPOSITE=y CONFIG_USB_ZERO=y CONFIG_CRC32=y CONFIG_CRC32_SLICEBY8=y ---8<--- Signed-off-by: Arve Hjønnevåg <arve@android.com> [yann.morin.1998@free.fr: add the resulting .config to commit log, remove unneeded USB_GADGET from the defconfig] Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-06 20:37:00 -07:00
kconfig: fix tristate choice with minimal config If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Arve Hjønnevåg <arve@android.com> Tested-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 09:11:52 +02:00
kconfig: loop as long as we changed some symbols in randconfig Because of choice-in-a-choice constructs, it can happen that not all symbols are assigned a value during randconfig, leading in rare cases to this situation: ---8<--- choice-in-choice.in choice bool "A/B/C" config A bool "A" config B bool "B" if B choice bool "E/F" config E bool "E" config F bool "F" endchoice endif # B config C bool "C" endchoice ---8<--- $ ./scripts/kconfig/conf --randconfig choice-in-choice.in [--SNIP--] $ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null [--SNIP--] A/B/C 1. A (A) > 2. B (B) 3. C (C) choice[1-3]: 2 E/F > 1. E (E) (NEW) 2. F (F) (NEW) choice[1-2]: aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. Fix this by looping in randconfig for as long as some symbol gets assigned a value. Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP), which uses this choice-in-a-choice construct, and exhibits this problem. The example above is just a stripped-down minimalist test-case. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-28 22:36:38 +02:00
kconfig: fix tristate choice with minimal config If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Arve Hjønnevåg <arve@android.com> Tested-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 09:11:52 +02:00
kconfig: implement KCONFIG_PROBABILITY for randconfig Currently the odds to set each symbol is (rounded): booleans: y: 50% n: 50% tristates: y: 33% m: 33% n: 33% Introduce a KCONFIG_PROBABILITY environment variable to tweak the probabilities (in percentage), as such: KCONFIG_PROBABILITY y:n split y:m:n split ----------------------------------------------------------------- [1] unset or empty 50 : 50 33 : 33 : 34 [2] N N : 100-N N/2 : N/2 : 100-N N:M N+M : 100-(N+M) N : M : 100-(N+M) N:M:L N : 100-N M : L : 100-(M+L) [1] The current behaviour is kept as default, for backward compatibility [2] The solution initially implemented by Peter for Buildroot, see: http://git.buildroot.org/buildroot/commit/?id=3435c1afb5 Signed-off-by: Peter Korsgaard <jacmet@uclibc.org> [yann.morin.1998@free.fr: add to Documentation/] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-13 17:18:36 +02:00
kconfig: loop as long as we changed some symbols in randconfig Because of choice-in-a-choice constructs, it can happen that not all symbols are assigned a value during randconfig, leading in rare cases to this situation: ---8<--- choice-in-choice.in choice bool "A/B/C" config A bool "A" config B bool "B" if B choice bool "E/F" config E bool "E" config F bool "F" endchoice endif # B config C bool "C" endchoice ---8<--- $ ./scripts/kconfig/conf --randconfig choice-in-choice.in [--SNIP--] $ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null [--SNIP--] A/B/C 1. A (A) > 2. B (B) 3. C (C) choice[1-3]: 2 E/F > 1. E (E) (NEW) 2. F (F) (NEW) choice[1-2]: aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. Fix this by looping in randconfig for as long as some symbol gets assigned a value. Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP), which uses this choice-in-a-choice construct, and exhibits this problem. The example above is just a stripped-down minimalist test-case. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-28 22:36:38 +02:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
kconfig: do not override symbols already set For randconfig, if a list of required symbols is specified with KCONFIG_ALLCONFIG, such symbols do not "have a value" as per sym_has_value(), but have the "valid" flag set. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-24 22:00:04 +02:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
kconfig: loop as long as we changed some symbols in randconfig Because of choice-in-a-choice constructs, it can happen that not all symbols are assigned a value during randconfig, leading in rare cases to this situation: ---8<--- choice-in-choice.in choice bool "A/B/C" config A bool "A" config B bool "B" if B choice bool "E/F" config E bool "E" config F bool "F" endchoice endif # B config C bool "C" endchoice ---8<--- $ ./scripts/kconfig/conf --randconfig choice-in-choice.in [--SNIP--] $ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null [--SNIP--] A/B/C 1. A (A) > 2. B (B) 3. C (C) choice[1-3]: 2 E/F > 1. E (E) (NEW) 2. F (F) (NEW) choice[1-2]: aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. Fix this by looping in randconfig for as long as some symbol gets assigned a value. Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP), which uses this choice-in-a-choice construct, and exhibits this problem. The example above is just a stripped-down minimalist test-case. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-28 22:36:38 +02:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
kconfig: make allnoconfig disable options behind EMBEDDED and EXPERT "make allnoconfig" exists to ease testing of minimal configurations. Documentation/SubmitChecklist includes a note to test with allnoconfig. This helps catch missing dependencies on common-but-not-required functionality, which might otherwise go unnoticed. However, allnoconfig still leaves many symbols enabled, because they're hidden behind CONFIG_EMBEDDED or CONFIG_EXPERT. For instance, allnoconfig still has CONFIG_PRINTK and CONFIG_BLOCK enabled, so drivers don't typically get build-tested with those disabled. To address this, introduce a new Kconfig option "allnoconfig_y", used on symbols which only exist to hide other symbols. Set it on CONFIG_EMBEDDED (which then selects CONFIG_EXPERT). allnoconfig will then disable all the symbols hidden behind those. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 15:39:09 -07:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
kconfig: implement KCONFIG_PROBABILITY for randconfig Currently the odds to set each symbol is (rounded): booleans: y: 50% n: 50% tristates: y: 33% m: 33% n: 33% Introduce a KCONFIG_PROBABILITY environment variable to tweak the probabilities (in percentage), as such: KCONFIG_PROBABILITY y:n split y:m:n split ----------------------------------------------------------------- [1] unset or empty 50 : 50 33 : 33 : 34 [2] N N : 100-N N/2 : N/2 : 100-N N:M N+M : 100-(N+M) N : M : 100-(N+M) N:M:L N : 100-N M : L : 100-(M+L) [1] The current behaviour is kept as default, for backward compatibility [2] The solution initially implemented by Peter for Buildroot, see: http://git.buildroot.org/buildroot/commit/?id=3435c1afb5 Signed-off-by: Peter Korsgaard <jacmet@uclibc.org> [yann.morin.1998@free.fr: add to Documentation/] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-13 17:18:36 +02:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
kconfig: fix randconfig for choice blocks Ingo Molnar reported that 'make randconfig' was not covering choice blocks properly, resulting in certain config options being left out of randconfig testing altogether. With the following patch we: - properly randomize choice value for normal choice blocks - properly randomize for multi choice blocks - added several comments to explain what is going on The root cause of the bug was that SYMBOL_VALID was set on the symbol representing the choice block so clearing this did the trick initially. But testign revealed a few more issues that is now fixed. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-03-15 11:05:12 +01:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
fix allmodconfig breakage If you use KCONFIG_ALLCONFIG (even with empty file) you get broken allmodconfig/allyesconfig; CONFIG_MODULES gets turned off, with obvious massive fallout. Breakage had been introduced when conf_set_all_new_symbols() got used for allmodconfig et.al. What happens is that sym_calc_value(modules_sym) done in conf_read_simple() sets SYMBOL_VALID on both modules_sym and MODULES. When we get to conf_set_all_new_symbols(), we set sym->def[S_DEF_USER] on everything, but it has no effect on sym->curr for the symbols that already have SYMBOL_VALID - these are stuck. Solution: use sym_clear_all_valid() in there. Note that it makes reevaluation of modules_sym redundant - sym_clear_all_valid() will do that itself. [ Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11512, says Alexey ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26 05:12:34 +00:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
kconfig: fix randconfig for choice blocks Ingo Molnar reported that 'make randconfig' was not covering choice blocks properly, resulting in certain config options being left out of randconfig testing altogether. With the following patch we: - properly randomize choice value for normal choice blocks - properly randomize for multi choice blocks - added several comments to explain what is going on The root cause of the bug was that SYMBOL_VALID was set on the symbol representing the choice block so clearing this did the trick initially. But testign revealed a few more issues that is now fixed. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-03-15 11:05:12 +01:00
kconfig: fix typos Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-05 01:41:16 -05:00
kconfig: fix randconfig for choice blocks Ingo Molnar reported that 'make randconfig' was not covering choice blocks properly, resulting in certain config options being left out of randconfig testing altogether. With the following patch we: - properly randomize choice value for normal choice blocks - properly randomize for multi choice blocks - added several comments to explain what is going on The root cause of the bug was that SYMBOL_VALID was set on the symbol representing the choice block so clearing this did the trick initially. But testign revealed a few more issues that is now fixed. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-03-15 11:05:12 +01:00
kconfig: fix typos Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-05 01:41:16 -05:00
kconfig: fix randconfig for choice blocks Ingo Molnar reported that 'make randconfig' was not covering choice blocks properly, resulting in certain config options being left out of randconfig testing altogether. With the following patch we: - properly randomize choice value for normal choice blocks - properly randomize for multi choice blocks - added several comments to explain what is going on The root cause of the bug was that SYMBOL_VALID was set on the symbol representing the choice block so clearing this did the trick initially. But testign revealed a few more issues that is now fixed. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-03-15 11:05:12 +01:00
kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on The defconfig and Kconfig combination below, which is based on 3.10-rc4 Kconfigs, resulted in several options getting set to "m" instead of "y". defconfig.choice: ---8<--- CONFIG_MODULES=y CONFIG_USB_ZERO=y ---8<--- Kconfig.choice: ---8<--- menuconfig MODULES bool "Enable loadable module support" config CONFIGFS_FS tristate "Userspace-driven configuration filesystem" config OCFS2_FS tristate "OCFS2 file system support" depends on CONFIGFS_FS select CRC32 config USB_LIBCOMPOSITE tristate select CONFIGFS_FS choice tristate "USB Gadget Drivers" default USB_ETH config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" select USB_LIBCOMPOSITE config USB_ETH tristate "Ethernet Gadget (with CDC Ethernet support)" select USB_LIBCOMPOSITE endchoice config CRC32 tristate "CRC32/CRC32c functions" default y choice prompt "CRC32 implementation" depends on CRC32 default CRC32_SLICEBY8 config CRC32_SLICEBY8 bool "Slice by 8 bytes" endchoice ---8<--- $ scripts/kconfig/conf --defconfig=defconfig.choice Kconfig.choice would result in: .config: ---8<--- CONFIG_MODULES=y CONFIG_CONFIGFS_FS=m CONFIG_USB_LIBCOMPOSITE=m CONFIG_USB_ZERO=m CONFIG_CRC32=y CONFIG_CRC32_SLICEBY8=y ---8<--- when the expected result would be: .config: ---8<--- CONFIG_MODULES=y CONFIG_CONFIGFS_FS=y CONFIG_USB_LIBCOMPOSITE=y CONFIG_USB_ZERO=y CONFIG_CRC32=y CONFIG_CRC32_SLICEBY8=y ---8<--- Signed-off-by: Arve Hjønnevåg <arve@android.com> [yann.morin.1998@free.fr: add the resulting .config to commit log, remove unneeded USB_GADGET from the defconfig] Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-06 20:37:00 -07:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
kconfig: fix tristate choice with minimal config If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Arve Hjønnevåg <arve@android.com> Tested-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 09:11:52 +02:00
kconfig: loop as long as we changed some symbols in randconfig Because of choice-in-a-choice constructs, it can happen that not all symbols are assigned a value during randconfig, leading in rare cases to this situation: ---8<--- choice-in-choice.in choice bool "A/B/C" config A bool "A" config B bool "B" if B choice bool "E/F" config E bool "E" config F bool "F" endchoice endif # B config C bool "C" endchoice ---8<--- $ ./scripts/kconfig/conf --randconfig choice-in-choice.in [--SNIP--] $ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null [--SNIP--] A/B/C 1. A (A) > 2. B (B) 3. C (C) choice[1-3]: 2 E/F > 1. E (E) (NEW) 2. F (F) (NEW) choice[1-2]: aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. Fix this by looping in randconfig for as long as some symbol gets assigned a value. Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP), which uses this choice-in-a-choice construct, and exhibits this problem. The example above is just a stripped-down minimalist test-case. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-28 22:36:38 +02:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00
kconfig: loop as long as we changed some symbols in randconfig Because of choice-in-a-choice constructs, it can happen that not all symbols are assigned a value during randconfig, leading in rare cases to this situation: ---8<--- choice-in-choice.in choice bool "A/B/C" config A bool "A" config B bool "B" if B choice bool "E/F" config E bool "E" config F bool "F" endchoice endif # B config C bool "C" endchoice ---8<--- $ ./scripts/kconfig/conf --randconfig choice-in-choice.in [--SNIP--] $ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null [--SNIP--] A/B/C 1. A (A) > 2. B (B) 3. C (C) choice[1-3]: 2 E/F > 1. E (E) (NEW) 2. F (F) (NEW) choice[1-2]: aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. Fix this by looping in randconfig for as long as some symbol gets assigned a value. Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP), which uses this choice-in-a-choice construct, and exhibits this problem. The example above is just a stripped-down minimalist test-case. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-28 22:36:38 +02:00
kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-06 04:55:55 +02:00