kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-28 19:20:30 +00:00
Code Issues Releases Packages Activity
linux/fs/ext4/inline.c

2018 lines
49 KiB
Raw Permalink Normal View History

ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: add normal write support for inline data For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
ext4: let fiemap work with inline data fiemap is used to find the disk layout of a file, as for inline data, let us just pretend like a file with just one extent. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: fix readdir error in the case of inline_data+dir_index Zach reported a problem that if inline data is enabled, we don't tell the difference between the offset of '.' and '..'. And a getdents will fail if the user only want to get '.' and what's worse, if there is a conversion happens when the user calls getdents many times, he/she may get the same entry twice. In theory, a dir block would also fail if it is converted to a hashed-index based dir since f_pos will become a hash value, not the real one, but it doesn't happen. And a deep investigation shows that we uses a hash based solution even for a normal dir if the dir_index feature is enabled. So this patch just adds a new htree_inlinedir_to_tree for inline dir, and if we find that the hash index is supported, we will do like what we do for a dir block. Reported-by: Zach Brown <zab@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-19 17:53:09 -04:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: make local functions static I have been running make namespacecheck to look for unneeded globals, and found these in ext4. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 10:50:23 -04:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: improve free space calculation for inline_data In ext4 feature inline_data,it use the xattr's space to store the inline data in inode.When we calculate the inline data as the xattr,we add the pad.But in get_max_inline_xattr_value_size() function we count the free space without pad.It cause some contents are moved to a block even if it can be stored in the inode. Signed-off-by: liulei <lewis.liulei@huawei.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Tao Ma <boyu.mt@taobao.com>
2013-07-01 08:12:37 -04:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: evict inline data out if we need to strore xattr in inode Now we that store data in the inode, in case we need to store some xattrs and inode doesn't have enough space, Andreas suggested that we should keep the xattr(metadata) in and data should be pushed out. So this patch does the work. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: make local functions static I have been running make namespacecheck to look for unneeded globals, and found these in ext4. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 10:50:23 -04:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access Make them more consistently Signed-off-by: xieliang <xieliang@xiaomi.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 22:06:43 -04:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: zero out inline data using memset() instead of empty_zero_page Not all architectures (in particular, sparc64) have empty_zero_page. So instead of copying from empty_zero_page, use memset to clear the inline data by signalling to ext4_xattr_set_entry() via a magic pointer value, EXT4_ZERO_ATTR_VALUE, which is defined by casting -1 to a pointer. This fixes a build failure on sparc64, and the memset() should be more efficient than using memcpy() anyway. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-11 03:31:49 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: evict inline data out if we need to strore xattr in inode Now we that store data in the inode, in case we need to store some xattrs and inode doesn't have enough space, Andreas suggested that we should keep the xattr(metadata) in and data should be pushed out. So this patch does the work. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access Make them more consistently Signed-off-by: xieliang <xieliang@xiaomi.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 22:06:43 -04:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: evict inline data out if we need to strore xattr in inode Now we that store data in the inode, in case we need to store some xattrs and inode doesn't have enough space, Andreas suggested that we should keep the xattr(metadata) in and data should be pushed out. So this patch does the work. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: make local functions static I have been running make namespacecheck to look for unneeded globals, and found these in ext4. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 10:50:23 -04:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access Make them more consistently Signed-off-by: xieliang <xieliang@xiaomi.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 22:06:43 -04:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: evict inline data out if we need to strore xattr in inode Now we that store data in the inode, in case we need to store some xattrs and inode doesn't have enough space, Andreas suggested that we should keep the xattr(metadata) in and data should be pushed out. So this patch does the work. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: add read support for inline data Let readpage and readpages handle the case when we want to read an inlined file. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:52 -05:00
ext4: add normal write support for inline data For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
ext4: pass context information to jbd2__journal_start() So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08 21:59:22 -05:00
ext4: add normal write support for inline data For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
ext4: don't keep using page if inline conversion fails If inline->extent conversion fails (most probably due to ENOSPC) and we release the temporary page that we allocated to transfer the file contents, don't keep using the page pointer after releasing the page. This occasionally leads to complaints about evicting locked pages or hangs when blocksize > pagesize, because it's possible for the page to get reallocated elsewhere in the meantime. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Tao Ma <tm@tao.ma>
2014-09-11 11:45:12 -04:00
ext4: add normal write support for inline data For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
ext4: don't keep using page if inline conversion fails If inline->extent conversion fails (most probably due to ENOSPC) and we release the temporary page that we allocated to transfer the file contents, don't keep using the page pointer after releasing the page. This occasionally leads to complaints about evicting locked pages or hangs when blocksize > pagesize, because it's possible for the page to get reallocated elsewhere in the meantime. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Tao Ma <tm@tao.ma>
2014-09-11 11:45:12 -04:00
ext4: add normal write support for inline data For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
ext4: pass context information to jbd2__journal_start() So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08 21:59:22 -05:00
ext4: add normal write support for inline data For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
ext4: add journalled write support for inline data Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: add delalloc support for inline data For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: ext4_da_convert_inline_data_to_extent drop locked page after error Testcase: xfstests generic/270 MKFS_OPTIONS="-q -I 256 -O inline_data,64bit" Call Trace: [<ffffffff81144c76>] lock_page+0x35/0x39 -------> DEADLOCK [<ffffffff81145260>] pagecache_get_page+0x65/0x15a [<ffffffff811507fc>] truncate_inode_pages_range+0x1db/0x45c [<ffffffff8120ea63>] ? ext4_da_get_block_prep+0x439/0x4b6 [<ffffffff811b29b7>] ? __block_write_begin+0x284/0x29c [<ffffffff8120e62a>] ? ext4_change_inode_journal_flag+0x16b/0x16b [<ffffffff81150af0>] truncate_inode_pages+0x12/0x14 [<ffffffff81247cb4>] ext4_truncate_failed_write+0x19/0x25 [<ffffffff812488cf>] ext4_da_write_inline_data_begin+0x196/0x31c [<ffffffff81210dad>] ext4_da_write_begin+0x189/0x302 [<ffffffff810c07ac>] ? trace_hardirqs_on+0xd/0xf [<ffffffff810ddd13>] ? read_seqcount_begin.clone.1+0x9f/0xcc [<ffffffff8114309d>] generic_perform_write+0xc7/0x1c6 [<ffffffff810c040e>] ? mark_held_locks+0x59/0x77 [<ffffffff811445d1>] __generic_file_write_iter+0x17f/0x1c5 [<ffffffff8120726b>] ext4_file_write_iter+0x2a5/0x354 [<ffffffff81185656>] ? file_start_write+0x2a/0x2c [<ffffffff8107bcdb>] ? bad_area_nosemaphore+0x13/0x15 [<ffffffff811858ce>] new_sync_write+0x8a/0xb2 [<ffffffff81186e7b>] vfs_write+0xb5/0x14d [<ffffffff81186ffb>] SyS_write+0x5c/0x8c [<ffffffff816f2529>] system_call_fastpath+0x12/0x17 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-05 21:37:15 -05:00
ext4: add delalloc support for inline data For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: ext4_da_convert_inline_data_to_extent drop locked page after error Testcase: xfstests generic/270 MKFS_OPTIONS="-q -I 256 -O inline_data,64bit" Call Trace: [<ffffffff81144c76>] lock_page+0x35/0x39 -------> DEADLOCK [<ffffffff81145260>] pagecache_get_page+0x65/0x15a [<ffffffff811507fc>] truncate_inode_pages_range+0x1db/0x45c [<ffffffff8120ea63>] ? ext4_da_get_block_prep+0x439/0x4b6 [<ffffffff811b29b7>] ? __block_write_begin+0x284/0x29c [<ffffffff8120e62a>] ? ext4_change_inode_journal_flag+0x16b/0x16b [<ffffffff81150af0>] truncate_inode_pages+0x12/0x14 [<ffffffff81247cb4>] ext4_truncate_failed_write+0x19/0x25 [<ffffffff812488cf>] ext4_da_write_inline_data_begin+0x196/0x31c [<ffffffff81210dad>] ext4_da_write_begin+0x189/0x302 [<ffffffff810c07ac>] ? trace_hardirqs_on+0xd/0xf [<ffffffff810ddd13>] ? read_seqcount_begin.clone.1+0x9f/0xcc [<ffffffff8114309d>] generic_perform_write+0xc7/0x1c6 [<ffffffff810c040e>] ? mark_held_locks+0x59/0x77 [<ffffffff811445d1>] __generic_file_write_iter+0x17f/0x1c5 [<ffffffff8120726b>] ext4_file_write_iter+0x2a5/0x354 [<ffffffff81185656>] ? file_start_write+0x2a/0x2c [<ffffffff8107bcdb>] ? bad_area_nosemaphore+0x13/0x15 [<ffffffff811858ce>] new_sync_write+0x8a/0xb2 [<ffffffff81186e7b>] vfs_write+0xb5/0x14d [<ffffffff81186ffb>] SyS_write+0x5c/0x8c [<ffffffff816f2529>] system_call_fastpath+0x12/0x17 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-05 21:37:15 -05:00
ext4: add delalloc support for inline data For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: retry allocation when inline->extent conversion failed Similarly as other ->write_begin functions in ext4, also ext4_da_write_inline_data_begin() should retry allocation if the conversion failed because of ENOSPC. This avoids returning ENOSPC prematurely because of uncommitted block deletions. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-01-06 14:02:23 -05:00
ext4: add delalloc support for inline data For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: retry allocation when inline->extent conversion failed Similarly as other ->write_begin functions in ext4, also ext4_da_write_inline_data_begin() should retry allocation if the conversion failed because of ENOSPC. This avoids returning ENOSPC prematurely because of uncommitted block deletions. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-01-06 14:02:23 -05:00
ext4: pass context information to jbd2__journal_start() So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08 21:59:22 -05:00
ext4: add delalloc support for inline data For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: standardize error handling in ext4_da_write_inline_data_begin() The function has a bit non-standard (for ext4) error recovery in that it used a mix of 'out' labels and testing for 'handle' being NULL. There isn't a good reason for that in the function so clean it up a bit. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-01-06 14:03:23 -05:00
ext4: add delalloc support for inline data For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: prevent fsreentrance deadlock for inline_data ext4_da_convert_inline_data_to_extent() invokes grab_cache_page_write_begin(). grab_cache_page_write_begin performs memory allocation, so fs-reentrance should be prohibited because we are inside journal transaction. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-02 16:09:50 -05:00
ext4: add delalloc support for inline data For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: retry allocation when inline->extent conversion failed Similarly as other ->write_begin functions in ext4, also ext4_da_write_inline_data_begin() should retry allocation if the conversion failed because of ENOSPC. This avoids returning ENOSPC prematurely because of uncommitted block deletions. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-01-06 14:02:23 -05:00
ext4: add delalloc support for inline data For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: standardize error handling in ext4_da_write_inline_data_begin() The function has a bit non-standard (for ext4) error recovery in that it used a mix of 'out' labels and testing for 'handle' being NULL. There isn't a good reason for that in the function so clean it up a bit. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-01-06 14:03:23 -05:00
ext4: add delalloc support for inline data For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: standardize error handling in ext4_da_write_inline_data_begin() The function has a bit non-standard (for ext4) error recovery in that it used a mix of 'out' labels and testing for 'handle' being NULL. There isn't a good reason for that in the function so clean it up a bit. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-01-06 14:03:23 -05:00
ext4: add delalloc support for inline data For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: add normal write support for inline data For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
ext4: let add_dir_entry handle inline data properly This patch let add_dir_entry handle the inline data case. So the dir is initialized as inline dir first and then we can try to add some files to it, when the inline space can't hold all the entries, a dir block will be created and the dir entry will be moved to it. Also for an inlined dir, "." and ".." are removed and we only use 4 bytes to store the parent inode number. These 2 entries will be added when we convert an inline dir to a block-based one. [ Folded in patch from Dan Carpenter to remove an unused variable. ] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access Make them more consistently Signed-off-by: xieliang <xieliang@xiaomi.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 22:06:43 -04:00
ext4: let add_dir_entry handle inline data properly This patch let add_dir_entry handle the inline data case. So the dir is initialized as inline dir first and then we can try to add some files to it, when the inline space can't hold all the entries, a dir block will be created and the dir entry will be moved to it. Also for an inlined dir, "." and ".." are removed and we only use 4 bytes to store the parent inode number. These 2 entries will be added when we convert an inline dir to a block-based one. [ Folded in patch from Dan Carpenter to remove an unused variable. ] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: Replace open coded mdata csum feature to helper function Besides the fact that this replacement improves code readability it also protects from errors caused direct EXT4_S(sb)->s_es manipulation which may result attempt to use uninitialized csum machinery. #Testcase_BEGIN IMG=/dev/ram0 MNT=/mnt mkfs.ext4 $IMG mount $IMG $MNT #Enable feature directly on disk, on mounted fs tune2fs -O metadata_csum $IMG # Provoke metadata update, likey result in OOPS touch $MNT/test umount $MNT #Testcase_END # Replacement script @@ expression E; @@ - EXT4_HAS_RO_COMPAT_FEATURE(E, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) + ext4_has_metadata_csum(E) https://bugzilla.kernel.org/show_bug.cgi?id=82201 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-10-13 03:36:16 -04:00
ext4: let add_dir_entry handle inline data properly This patch let add_dir_entry handle the inline data case. So the dir is initialized as inline dir first and then we can try to add some files to it, when the inline space can't hold all the entries, a dir block will be created and the dir entry will be moved to it. Also for an inlined dir, "." and ".." are removed and we only use 4 bytes to store the parent inode number. These 2 entries will be added when we convert an inline dir to a block-based one. [ Folded in patch from Dan Carpenter to remove an unused variable. ] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: check inline directory before converting Before converting an inline directory to a regular directory, check the directory entries to make sure they're not obviously broken. This helps us to avoid a BUG_ON if one of the dirents is trashed. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2014-07-28 13:06:26 -04:00
ext4: let add_dir_entry handle inline data properly This patch let add_dir_entry handle the inline data case. So the dir is initialized as inline dir first and then we can try to add some files to it, when the inline space can't hold all the entries, a dir block will be created and the dir entry will be moved to it. Also for an inlined dir, "." and ".." are removed and we only use 4 bytes to store the parent inode number. These 2 entries will be added when we convert an inline dir to a block-based one. [ Folded in patch from Dan Carpenter to remove an unused variable. ] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: return ENOMEM if sb_getblk() fails The only reason for sb_getblk() failing is if it can't allocate the buffer_head. So ENOMEM is more appropriate than EIO. In addition, make sure that the file system is marked as being inconsistent if sb_getblk() fails. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2013-01-12 16:19:36 -05:00
ext4: let add_dir_entry handle inline data properly This patch let add_dir_entry handle the inline data case. So the dir is initialized as inline dir first and then we can try to add some files to it, when the inline space can't hold all the entries, a dir block will be created and the dir entry will be moved to it. Also for an inlined dir, "." and ".." are removed and we only use 4 bytes to store the parent inode number. These 2 entries will be added when we convert an inline dir to a block-based one. [ Folded in patch from Dan Carpenter to remove an unused variable. ] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: fix readdir error in the case of inline_data+dir_index Zach reported a problem that if inline data is enabled, we don't tell the difference between the offset of '.' and '..'. And a getdents will fail if the user only want to get '.' and what's worse, if there is a conversion happens when the user calls getdents many times, he/she may get the same entry twice. In theory, a dir block would also fail if it is converted to a hashed-index based dir since f_pos will become a hash value, not the real one, but it doesn't happen. And a deep investigation shows that we uses a hash based solution even for a normal dir if the dir_index feature is enabled. So this patch just adds a new htree_inlinedir_to_tree for inline dir, and if we find that the hash index is supported, we will do like what we do for a dir block. Reported-by: Zach Brown <zab@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-19 17:53:09 -04:00
ext4: fix readdir error in case inline_data+^dir_index. Zach reported a problem that if inline data is enabled, we don't tell the difference between the offset of '.' and '..'. And a getdents will fail if the user only want to get '.'. And what's worse, we may meet with duplicate dir entries as the offset for inline dir and non-inline one is quite different. This patch just try to resolve this problem if dir_index is disabled. In this case, f_pos is the real offset with the dir block, so for inline dir, we just pretend as if we are a dir block and returns the offset like a norml dir block does. Reported-by: Zach Brown <zab@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-19 17:55:33 -04:00
[readdir] convert ext4 and trim the living hell out bogosities in inline dir case Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-17 16:08:53 -04:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
[readdir] convert ext4 and trim the living hell out bogosities in inline dir case Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-17 16:08:53 -04:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
[readdir] convert ext4 and trim the living hell out bogosities in inline dir case Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-17 16:08:53 -04:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: fix readdir error in case inline_data+^dir_index. Zach reported a problem that if inline data is enabled, we don't tell the difference between the offset of '.' and '..'. And a getdents will fail if the user only want to get '.'. And what's worse, we may meet with duplicate dir entries as the offset for inline dir and non-inline one is quite different. This patch just try to resolve this problem if dir_index is disabled. In this case, f_pos is the real offset with the dir block, so for inline dir, we just pretend as if we are a dir block and returns the offset like a norml dir block does. Reported-by: Zach Brown <zab@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-19 17:55:33 -04:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: change ext4_read_inline_dir() to return 0 on success In ext4_read_inline_dir(), if there is inline data, the successful return value is the return value of ext4_read_inline_data(). Howewer, this is used by ext4_readdir(), and while it seems harmless to return a positive value on success, it's inconsistent, since historically we've always return 0 on success. Signed-off-by: BoxiLiu <lewis.liulei@huawei.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: Tao Ma <boyu.mt@taobao.com>
2013-10-30 08:07:20 -04:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
[readdir] convert ext4 and trim the living hell out bogosities in inline dir case Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-17 16:08:53 -04:00
ext4: fix readdir error in case inline_data+^dir_index. Zach reported a problem that if inline data is enabled, we don't tell the difference between the offset of '.' and '..'. And a getdents will fail if the user only want to get '.'. And what's worse, we may meet with duplicate dir entries as the offset for inline dir and non-inline one is quite different. This patch just try to resolve this problem if dir_index is disabled. In this case, f_pos is the real offset with the dir block, so for inline dir, we just pretend as if we are a dir block and returns the offset like a norml dir block does. Reported-by: Zach Brown <zab@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-19 17:55:33 -04:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
[readdir] convert ext4 and trim the living hell out bogosities in inline dir case Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-17 16:08:53 -04:00
ext4: fix readdir error in case inline_data+^dir_index. Zach reported a problem that if inline data is enabled, we don't tell the difference between the offset of '.' and '..'. And a getdents will fail if the user only want to get '.'. And what's worse, we may meet with duplicate dir entries as the offset for inline dir and non-inline one is quite different. This patch just try to resolve this problem if dir_index is disabled. In this case, f_pos is the real offset with the dir block, so for inline dir, we just pretend as if we are a dir block and returns the offset like a norml dir block does. Reported-by: Zach Brown <zab@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-19 17:55:33 -04:00
[readdir] convert ext4 and trim the living hell out bogosities in inline dir case Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-17 16:08:53 -04:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
[readdir] convert ext4 and trim the living hell out bogosities in inline dir case Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-17 16:08:53 -04:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
[readdir] convert ext4 and trim the living hell out bogosities in inline dir case Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-17 16:08:53 -04:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
[readdir] convert ext4 and trim the living hell out bogosities in inline dir case Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-17 16:08:53 -04:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
[readdir] convert ext4 and trim the living hell out bogosities in inline dir case Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-17 16:08:53 -04:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: let ext4_rename handle inline dir In case we rename a directory, ext4_rename has to read the dir block and change its dotdot's information. The old ext4_rename encapsulated the dir_block read into itself. So this patch adds a new function ext4_get_first_dir_block() which gets the dir buffer information so the ext4_rename can handle it properly. As it will also change the parent inode number, we return the parent_de so that ext4_rename() can handle it more easily. ext4_find_entry is also changed so that the caller(rename) can tell whether the found entry is an inlined one or not and journaling the corresponding buffer head. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:01 -05:00
ext4: let add_dir_entry handle inline data properly This patch let add_dir_entry handle the inline data case. So the dir is initialized as inline dir first and then we can try to add some files to it, when the inline space can't hold all the entries, a dir block will be created and the dir entry will be moved to it. Also for an inlined dir, "." and ".." are removed and we only use 4 bytes to store the parent inode number. These 2 entries will be added when we convert an inline dir to a block-based one. [ Folded in patch from Dan Carpenter to remove an unused variable. ] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: let ext4_find_entry handle inline data Create a new function ext4_find_inline_entry() to handle the case of inline data. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:00 -05:00
ext4: let ext4_delete_entry() handle inline data Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:00 -05:00
ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access Make them more consistently Signed-off-by: xieliang <xieliang@xiaomi.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 22:06:43 -04:00
ext4: let ext4_delete_entry() handle inline data Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:00 -05:00
ext4: let empty_dir handle inline dir empty_dir is used when deleting a dir. So it should handle inline dir properly. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:01 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: let fiemap work with inline data fiemap is used to find the disk layout of a file, as for inline data, let us just pretend like a file with just one extent. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: ext4_inline_data_fiemap should respect callers argument Currently ext4_inline_data_fiemap ignores requested arguments (start and len) which may lead endless loop if start != 0. Also fix incorrect extent length determination. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-02 16:11:20 -05:00
ext4: let fiemap work with inline data fiemap is used to find the disk layout of a file, as for inline data, let us just pretend like a file with just one extent. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: ext4_inline_data_fiemap should respect callers argument Currently ext4_inline_data_fiemap ignores requested arguments (start and len) which may lead endless loop if start != 0. Also fix incorrect extent length determination. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-02 16:11:20 -05:00
ext4: let fiemap work with inline data fiemap is used to find the disk layout of a file, as for inline data, let us just pretend like a file with just one extent. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: ext4_inline_data_fiemap should respect callers argument Currently ext4_inline_data_fiemap ignores requested arguments (start and len) which may lead endless loop if start != 0. Also fix incorrect extent length determination. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-02 16:11:20 -05:00
ext4: let fiemap work with inline data fiemap is used to find the disk layout of a file, as for inline data, let us just pretend like a file with just one extent. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: fix data offset overflow on 32-bit archs in ext4_inline_data_fiemap() On 32-bit archs when sector_t is defined as 32-bit the logic computing data offset in ext4_inline_data_fiemap(). Fix that by properly typing the shifted value. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-31 19:33:42 -04:00
ext4: let fiemap work with inline data fiemap is used to find the disk layout of a file, as for inline data, let us just pretend like a file with just one extent. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: ext4_inline_data_fiemap should respect callers argument Currently ext4_inline_data_fiemap ignores requested arguments (start and len) which may lead endless loop if start != 0. Also fix incorrect extent length determination. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-02 16:11:20 -05:00
ext4: let fiemap work with inline data fiemap is used to find the disk layout of a file, as for inline data, let us just pretend like a file with just one extent. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: evict inline data out if we need to strore xattr in inode Now we that store data in the inode, in case we need to store some xattrs and inode doesn't have enough space, Andreas suggested that we should keep the xattr(metadata) in and data should be pushed out. So this patch does the work. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: let ext4_truncate handle inline data correctly Signed-off-by: Robin Dong <sanbai@taobao.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: pass context information to jbd2__journal_start() So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08 21:59:22 -05:00
ext4: let ext4_truncate handle inline data correctly Signed-off-by: Robin Dong <sanbai@taobao.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: avoid clearing beyond i_blocks when truncating an inline data file A missing cast means that when we are truncating a file which is less than 60 bytes, we don't clear the correct area of memory, and in fact we can end up truncating the next inode in the inode table, or worse yet, some other kernel data structure. Addresses-Coverity-Id: #751987 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-01-07 12:58:19 -05:00
ext4: let ext4_truncate handle inline data correctly Signed-off-by: Robin Dong <sanbai@taobao.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: let fallocate handle inline data correctly If we are punching hole in a file, we will return ENOTSUPP. As for the fallocation of some extents, we will convert the inline data to a normal extent based file first. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:03 -05:00
ext4: pass context information to jbd2__journal_start() So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08 21:59:22 -05:00
ext4: let fallocate handle inline data correctly If we are punching hole in a file, we will return ENOTSUPP. As for the fallocation of some extents, we will convert the inline data to a normal extent based file first. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:03 -05:00