kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-28 19:20:30 +00:00
Code Issues Releases Packages Activity
linux/drivers/dma/cppi41.c

1194 lines
28 KiB
Raw Permalink Normal View History

dma: cppi41: add a delay while setting the TD bit The manual says that we need to (repeatedly) set the TearDown-bit for the endpoint in order to get the active transfer descriptor released. Doing this "real" quick over and over again seems to work but it also seems that the hardware might not have enough time to breathe. So I though, hey lets add a udelay() between between the individual sets of the bit. This change with the g_zero testcase resulted in a warning about missing transfer descriptor (we got the tear-down one). It seems that if the hardware has some time it manages to release the transfer-descriptor on the completion queue after the teaddown descriptor. With this change, I observe that the transfer descriptor is released after 20-30 retry loops. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-03 15:09:50 +01:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cpp41: enable pm_runtime during init With enabled pm_runtime in the kernel the device won't work because it is not "on" during the probe function. This patch enables the device via pm_runtime on probe so it remains activated. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-20 18:35:53 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: handle 0-length packets When a 0-length packet is received on the bus, desc->pd0 yields 1, which confuses the driver's users. This information is clearly wrong and not in accordance to the datasheet, but it's been observed on an AM335x board, very reproducible. Fix this by looking at bit 19 in PD2 of the completed packet. This bit will tell us if a zero-length packet was received on a queue. If it's set, ignore the value in PD0 and report a total length of 0 instead. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-26 14:52:34 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: restore more registers With active users over suspend/resume cycles, it turns out that more registers, in particular DMA_TDFDQ and RXHPCRA0, have to be restored on resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:03 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dma: cppi41: restore more registers With active users over suspend/resume cycles, it turns out that more registers, in particular DMA_TDFDQ and RXHPCRA0, have to be restored on resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:03 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: off by one in desc_to_chan() The test here should be ">=" instead of ">". The cdd->chan_busy[] array has "ALLOC_DECS_NUM" elements. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-28 13:48:44 +03:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: use cppi41_pop_desc() where possible Use cppi41_pop_desc() when appropriate instead of open-coding the same functionality again. That makes the code more readable. The function has to be moved some lines up for this change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:04 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: handle 0-length packets When a 0-length packet is received on the bus, desc->pd0 yields 1, which confuses the driver's users. This information is clearly wrong and not in accordance to the datasheet, but it's been observed on an AM335x board, very reproducible. Fix this by looking at bit 19 in PD2 of the completed packet. This bit will tell us if a zero-length packet was received on a queue. If it's set, ignore the value in PD0 and report a total length of 0 instead. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-26 14:52:34 +02:00
dmaengine: cppi41: More PM runtime fixes Fix use of u32 instead of int for checking for negative errors values as pointed out by Dan Carpenter <dan.carpenter@oracle.com>. And while testing the PM runtime error path by randomly returning failed values in runtime resume, I noticed two more places that need fixing: - If pm_runtime_get_sync() fails in probe, we still need to do pm_runtime_put_sync() to keep the use count happy. We could call pm_runtime_put_noidle() on the error path, but we're just going to call pm_runtime_disable() after that so pm_runtime_put_sync() will do what we want - We should print an error if pm_runtime_get_sync() fails in cppi41_dma_alloc_chan_resources() so we know where it happens Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 740b4be3f742 ("dmaengine: cpp41: Fix handling of error path") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-16 10:24:15 -08:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: More PM runtime fixes Fix use of u32 instead of int for checking for negative errors values as pointed out by Dan Carpenter <dan.carpenter@oracle.com>. And while testing the PM runtime error path by randomly returning failed values in runtime resume, I noticed two more places that need fixing: - If pm_runtime_get_sync() fails in probe, we still need to do pm_runtime_put_sync() to keep the use count happy. We could call pm_runtime_put_noidle() on the error path, but we're just going to call pm_runtime_disable() after that so pm_runtime_put_sync() will do what we want - We should print an error if pm_runtime_get_sync() fails in cppi41_dma_alloc_chan_resources() so we know where it happens Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 740b4be3f742 ("dmaengine: cpp41: Fix handling of error path") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-16 10:24:15 -08:00
dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected On am335x with musb host we can end up with unpaired pm runtime calls if a hub with no devices is connected and disconnected. This is because of the conditional pm runtime calls which are always a bad idea. Let's fix the issue by making them unconditional and paired in each function. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-09 09:47:59 -07:00
dmaengine: cppi41: More PM runtime fixes Fix use of u32 instead of int for checking for negative errors values as pointed out by Dan Carpenter <dan.carpenter@oracle.com>. And while testing the PM runtime error path by randomly returning failed values in runtime resume, I noticed two more places that need fixing: - If pm_runtime_get_sync() fails in probe, we still need to do pm_runtime_put_sync() to keep the use count happy. We could call pm_runtime_put_noidle() on the error path, but we're just going to call pm_runtime_disable() after that so pm_runtime_put_sync() will do what we want - We should print an error if pm_runtime_get_sync() fails in cppi41_dma_alloc_chan_resources() so we know where it happens Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 740b4be3f742 ("dmaengine: cpp41: Fix handling of error path") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-16 10:24:15 -08:00
dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected On am335x with musb host we can end up with unpaired pm runtime calls if a hub with no devices is connected and disconnected. This is because of the conditional pm runtime calls which are always a bad idea. Let's fix the issue by making them unconditional and paired in each function. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-09 09:47:59 -07:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: use cppi41_pop_desc() where possible Use cppi41_pop_desc() when appropriate instead of open-coding the same functionality again. That makes the code more readable. The function has to be moved some lines up for this change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:04 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: handle 0-length packets When a 0-length packet is received on the bus, desc->pd0 yields 1, which confuses the driver's users. This information is clearly wrong and not in accordance to the datasheet, but it's been observed on an AM335x board, very reproducible. Fix this by looking at bit 19 in PD2 of the completed packet. This bit will tell us if a zero-length packet was received on a queue. If it's set, ignore the value in PD0 and report a total length of 0 instead. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-26 14:52:34 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: convert callback to helper function This is in preperation of moving to a callback that provides results to the callback for the transaction. The conversion will maintain current behavior and the driver must convert to new callback mechanism at a later time in order to receive results. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-20 13:10:54 -07:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dmaengine: cpp41: Fix handling of error path If we return early on pm_runtime_get() error, we need to also call pm_runtime_put_noidle() as pointed out in a musb related thread by Johan Hovold <johan@kernel.org>. This is to keep the PM runtime use counts happy. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-11 11:28:52 -08:00
dmaengine: cppi41: More PM runtime fixes Fix use of u32 instead of int for checking for negative errors values as pointed out by Dan Carpenter <dan.carpenter@oracle.com>. And while testing the PM runtime error path by randomly returning failed values in runtime resume, I noticed two more places that need fixing: - If pm_runtime_get_sync() fails in probe, we still need to do pm_runtime_put_sync() to keep the use count happy. We could call pm_runtime_put_noidle() on the error path, but we're just going to call pm_runtime_disable() after that so pm_runtime_put_sync() will do what we want - We should print an error if pm_runtime_get_sync() fails in cppi41_dma_alloc_chan_resources() so we know where it happens Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 740b4be3f742 ("dmaengine: cpp41: Fix handling of error path") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-16 10:24:15 -08:00
dmaengine: cpp41: Fix handling of error path If we return early on pm_runtime_get() error, we need to also call pm_runtime_put_noidle() as pointed out in a musb related thread by Johan Hovold <johan@kernel.org>. This is to keep the PM runtime use counts happy. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-11 11:28:52 -08:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dmaengine: cpp41: Fix handling of error path If we return early on pm_runtime_get() error, we need to also call pm_runtime_put_noidle() as pointed out in a musb related thread by Johan Hovold <johan@kernel.org>. This is to keep the PM runtime use counts happy. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-11 11:28:52 -08:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dmaengine: cpp41: Fix handling of error path If we return early on pm_runtime_get() error, we need to also call pm_runtime_put_noidle() as pointed out in a musb related thread by Johan Hovold <johan@kernel.org>. This is to keep the PM runtime use counts happy. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-11 11:28:52 -08:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dmaengine: cpp41: Fix handling of error path If we return early on pm_runtime_get() error, we need to also call pm_runtime_put_noidle() as pointed out in a musb related thread by Johan Hovold <johan@kernel.org>. This is to keep the PM runtime use counts happy. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-11 11:28:52 -08:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: use DMA_COMPLETE for dma completion status Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-16 13:36:28 +05:30
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: Prepare to add PM runtime support Let's just move code from cppi41_dma_issue_pending() to push_desc_queue() as that's the only call to push_desc_queue(). We want to do this for PM runtime as we need to call push_desc_queue() also for pending queued transfers from PM runtime resume. No functional changes, just moves code around. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-19 15:59:39 -07:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dmaengine: cppi41: Prepare to add PM runtime support Let's just move code from cppi41_dma_issue_pending() to push_desc_queue() as that's the only call to push_desc_queue(). We want to do this for PM runtime as we need to call push_desc_queue() also for pending queued transfers from PM runtime resume. No functional changes, just moves code around. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-19 15:59:39 -07:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dmaengine: cppi41: Ignore EINPROGRESS for PM runtime We can occasionally get -EINPROGRESS for pm_runtime_get. In that case we can just continue as we're queueing transfers anyways when pm_runtime_active is not set. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-13 10:22:43 -07:00
dmaengine: cpp41: Fix handling of error path If we return early on pm_runtime_get() error, we need to also call pm_runtime_put_noidle() as pointed out in a musb related thread by Johan Hovold <johan@kernel.org>. This is to keep the PM runtime use counts happy. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-11 11:28:52 -08:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dmaengine: cppi41: Prepare to add PM runtime support Let's just move code from cppi41_dma_issue_pending() to push_desc_queue() as that's the only call to push_desc_queue(). We want to do this for PM runtime as we need to call push_desc_queue() also for pending queued transfers from PM runtime resume. No functional changes, just moves code around. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-19 15:59:39 -07:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected On am335x with musb host we can end up with unpaired pm runtime calls if a hub with no devices is connected and disconnected. This is because of the conditional pm runtime calls which are always a bad idea. Let's fix the issue by making them unconditional and paired in each function. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-09 09:47:59 -07:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: wait longer for the HW to return the descriptor For a "complete" teardown we have to wait until the teardown descriptor is returned by the hardware. The g_zero testcase "testusb -a -t 9" triggers the following warning quite reliable: |------------[ cut here ]------------ |WARNING: CPU: 0 PID: 0 at drivers/dma/cppi41.c:609 cppi41_dma_control+0x198/0x304() |[<c003f84c>] (warn_slowpath_null) from [<c02be8d8>] |[<c02be8d8>] (cppi41_dma_control) from [<bf08d25c>] |[<bf08d25c>] (cppi41_dma_channel_abort [musb_hdrc]) |[<bf08bc38>] (nuke.constprop.10 [musb_hdrc]) |[<bf08bd08>] (musb_gadget_disable [musb_hdrc]) |[<bf252524>] (disable_endpoints [usb_f_ss_lb]) |[<bf2525d8>] (disable_source_sink [usb_f_ss_lb]) |[<bf25260c>] (sourcesink_set_alt [usb_f_ss_lb]) |[<bf23ad24>] (composite_setup [libcomposite]) |[<bf08a2f4>] (musb_g_ep0_irq [musb_hdrc]) |[<bf085ec4>] (musb_interrupt [musb_hdrc]) |[<bf0aeaf4>] (dsps_interrupt [musb_dsps]) |[<c0080ea8>] (handle_irq_event_percpu) |[<c008112c>] (handle_irq_event) |[<c008348c>] (handle_level_irq) |[<c00807a8>] (generic_handle_irq) |[<c000ee80>] (handle_IRQ) |[<c00085f0>] (omap3_intc_handle_irq) and complains about a TD descriptor which is not returned. I've been looking at several things and haven't noticed anything unusual that might lead to this. The manual says "to try again" until the descriptor comes out. I limited the amount of retries to 100 retries in order to avoid an infinite number of retries and so a busy-loop. Back then testing revealed that the number of retries were around 20-30 so 100 seemed a good upper limit. This g_zero test reaches without a problem 98 retries and it jumps sometimes to 101 on am335x-evm and so the WARN_ON() triggers. Same test run on beaglebone black and the retries start at 122 and my max value so far was at 128. So lets rise the limit to 500. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-03 15:09:49 +01:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: redo descriptor collection in abort case Most of the logic here is try and error since what actually happens does not match the trm or I miss read it. My first assumption was that the queue on which the tear-down descriptor completes (their own complete queue vs "active descriptor" complete queue) depends on the transfer direction. This seems not to be true because I manage to trigger | WARN_ON(c->desc_phys != desc_phys); and the other few were fine means the tear-down descriptor was valid but on different queue. This patch changes the logic here to look on both queues for the descriptor. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:05 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: redo descriptor collection in abort case Most of the logic here is try and error since what actually happens does not match the trm or I miss read it. My first assumption was that the queue on which the tear-down descriptor completes (their own complete queue vs "active descriptor" complete queue) depends on the transfer direction. This seems not to be true because I manage to trigger | WARN_ON(c->desc_phys != desc_phys); and the other few were fine means the tear-down descriptor was valid but on different queue. This patch changes the logic here to look on both queues for the descriptor. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:05 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: redo descriptor collection in abort case Most of the logic here is try and error since what actually happens does not match the trm or I miss read it. My first assumption was that the queue on which the tear-down descriptor completes (their own complete queue vs "active descriptor" complete queue) depends on the transfer direction. This seems not to be true because I manage to trigger | WARN_ON(c->desc_phys != desc_phys); and the other few were fine means the tear-down descriptor was valid but on different queue. This patch changes the logic here to look on both queues for the descriptor. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:05 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: redo descriptor collection in abort case Most of the logic here is try and error since what actually happens does not match the trm or I miss read it. My first assumption was that the queue on which the tear-down descriptor completes (their own complete queue vs "active descriptor" complete queue) depends on the transfer direction. This seems not to be true because I manage to trigger | WARN_ON(c->desc_phys != desc_phys); and the other few were fine means the tear-down descriptor was valid but on different queue. This patch changes the logic here to look on both queues for the descriptor. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:05 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add a delay while setting the TD bit The manual says that we need to (repeatedly) set the TearDown-bit for the endpoint in order to get the active transfer descriptor released. Doing this "real" quick over and over again seems to work but it also seems that the hardware might not have enough time to breathe. So I though, hey lets add a udelay() between between the individual sets of the bit. This change with the g_zero testcase resulted in a warning about missing transfer descriptor (we got the tear-down one). It seems that if the hardware has some time it manages to release the transfer-descriptor on the completion queue after the teaddown descriptor. With this change, I observe that the transfer descriptor is released after 20-30 retry loops. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-03 15:09:50 +01:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add a delay while setting the TD bit The manual says that we need to (repeatedly) set the TearDown-bit for the endpoint in order to get the active transfer descriptor released. Doing this "real" quick over and over again seems to work but it also seems that the hardware might not have enough time to breathe. So I though, hey lets add a udelay() between between the individual sets of the bit. This change with the g_zero testcase resulted in a warning about missing transfer descriptor (we got the tear-down one). It seems that if the hardware has some time it manages to release the transfer-descriptor on the completion queue after the teaddown descriptor. With this change, I observe that the transfer descriptor is released after 20-30 retry loops. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-03 15:09:50 +01:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add a delay while setting the TD bit The manual says that we need to (repeatedly) set the TearDown-bit for the endpoint in order to get the active transfer descriptor released. Doing this "real" quick over and over again seems to work but it also seems that the hardware might not have enough time to breathe. So I though, hey lets add a udelay() between between the individual sets of the bit. This change with the g_zero testcase resulted in a warning about missing transfer descriptor (we got the tear-down one). It seems that if the hardware has some time it manages to release the transfer-descriptor on the completion queue after the teaddown descriptor. With this change, I observe that the transfer descriptor is released after 20-30 retry loops. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-03 15:09:50 +01:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: use cppi41_pop_desc() where possible Use cppi41_pop_desc() when appropriate instead of open-coding the same functionality again. That makes the code more readable. The function has to be moved some lines up for this change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:04 +02:00
dma: cppi41: add a delay while setting the TD bit The manual says that we need to (repeatedly) set the TearDown-bit for the endpoint in order to get the active transfer descriptor released. Doing this "real" quick over and over again seems to work but it also seems that the hardware might not have enough time to breathe. So I though, hey lets add a udelay() between between the individual sets of the bit. This change with the g_zero testcase resulted in a warning about missing transfer descriptor (we got the tear-down one). It seems that if the hardware has some time it manages to release the transfer-descriptor on the completion queue after the teaddown descriptor. With this change, I observe that the transfer descriptor is released after 20-30 retry loops. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-03 15:09:50 +01:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: start tear down only if channel is busy Start the channel tear down only if the channel is busy, else just bail out. In some cases its seen that by the time the tear down is initiated the cppi completes the DMA, especially in ISOCH transfers. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-02-27 10:44:40 +05:30
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: s/deinit_cpii41/deinit_cppi41/ Fix a misspelled function name. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:01 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: s/deinit_cpii41/deinit_cppi41/ Fix a misspelled function name. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:01 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: pass around device instead of platform_device Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:00 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: add missing bitfields Add missing directions, residue_granularity, srd_addr_widths and dst_addr_widths bitfields. Without those we will see a kernel WARN() when loading musb on am335x devices. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-08 11:45:42 -05:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: Switch to using managed resource in probe This change uses managed resource APIs to allocate resources such as, mem, irq in order to simplify the driver unload or failure cases Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-24 15:53:46 +05:30
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: Split device_control Split the device_control callback of the TI CPPI41 DMA driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17 14:42:10 +01:00
dmaengine: cppi41: add missing bitfields Add missing directions, residue_granularity, srd_addr_widths and dst_addr_widths bitfields. Without those we will see a kernel WARN() when loading musb on am335x devices. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-08 11:45:42 -05:00
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: Switch to using managed resource in probe This change uses managed resource APIs to allocate resources such as, mem, irq in order to simplify the driver unload or failure cases Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-24 15:53:46 +05:30
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
dma: cppi41: return code > 0 of pm_runtime_get_sync() is not an error Return code of pm_runtime_get_sync() > 0 is not an error and may happen. Noticed during rmmod & modprobe testing. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:06 +02:00
dma: cpp41: enable pm_runtime during init With enabled pm_runtime in the kernel the device won't work because it is not "on" during the probe function. This patch enables the device via pm_runtime on probe so it remains activated. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-20 18:35:53 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
drivers/dma: fix error return code Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-29 23:47:23 +01:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
drivers/dma: fix error return code Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-29 23:47:23 +01:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: Switch to using managed resource in probe This change uses managed resource APIs to allocate resources such as, mem, irq in order to simplify the driver unload or failure cases Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-24 15:53:46 +05:30
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dma: cpp41: enable pm_runtime during init With enabled pm_runtime in the kernel the device won't work because it is not "on" during the probe function. This patch enables the device via pm_runtime on probe so it remains activated. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-20 18:35:53 +02:00
dmaengine: cppi41: More PM runtime fixes Fix use of u32 instead of int for checking for negative errors values as pointed out by Dan Carpenter <dan.carpenter@oracle.com>. And while testing the PM runtime error path by randomly returning failed values in runtime resume, I noticed two more places that need fixing: - If pm_runtime_get_sync() fails in probe, we still need to do pm_runtime_put_sync() to keep the use count happy. We could call pm_runtime_put_noidle() on the error path, but we're just going to call pm_runtime_disable() after that so pm_runtime_put_sync() will do what we want - We should print an error if pm_runtime_get_sync() fails in cppi41_dma_alloc_chan_resources() so we know where it happens Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 740b4be3f742 ("dmaengine: cpp41: Fix handling of error path") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-16 10:24:15 -08:00
dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe() Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:02 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: Fix list not empty warning on module removal If musb controller is configured with USB peripherals and we have enumerated with a USB host, we can get warnings on removal of the modules: WARNING: CPU: 0 PID: 1269 at drivers/dma/cppi41.c:391 cppi41_dma_free_chan_resources Fix the issue by adding the missing pm_runtime_get to cppi41_dma_free_chan_resources to make sure the pending work list is cleared on removal. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-09 09:47:58 -07:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: Fix list not empty warning on module removal If musb controller is configured with USB peripherals and we have enumerated with a USB host, we can get warnings on removal of the modules: WARNING: CPU: 0 PID: 1269 at drivers/dma/cppi41.c:391 cppi41_dma_free_chan_resources Fix the issue by adding the missing pm_runtime_get to cppi41_dma_free_chan_resources to make sure the pending work list is cleared on removal. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-09 09:47:58 -07:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: Switch to using managed resource in probe This change uses managed resource APIs to allocate resources such as, mem, irq in order to simplify the driver unload or failure cases Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-24 15:53:46 +05:30
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: s/deinit_cpii41/deinit_cppi41/ Fix a misspelled function name. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:01 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dma: cpp41: enable pm_runtime during init With enabled pm_runtime in the kernel the device won't work because it is not "on" during the probe function. This patch enables the device via pm_runtime on probe so it remains activated. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-20 18:35:53 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dmaengine: cppi41: mark PM functions as __maybe_unused When CONFIG_PM_SLEEP is disabled, we get a build error in the cppi41 dmaengine driver, since the runtime-pm functions are hidden within the wrong #ifdef: drivers/dma/cppi41.c:1158:21: error: 'cppi41_runtime_suspend' undeclared here (not in a function) This removes the #ifdef and instead uses __maybe_unused annotations that cannot have this problem. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-06 15:20:05 +02:00
dma: cppi41: add support for suspend and resume This patch adds support for suspend/resume functionality to the cppi41 DMA driver. The steps necessary to make the system resume properly were figured out by trial-and-error. The code as it stands now is the minimum that has to be done to put the musb host system on an AM33xx system into an operable state after resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:04 +02:00
dma: cppi41: restore more registers With active users over suspend/resume cycles, it turns out that more registers, in particular DMA_TDFDQ and RXHPCRA0, have to be restored on resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:03 +02:00
dma: cppi41: add support for suspend and resume This patch adds support for suspend/resume functionality to the cppi41 DMA driver. The steps necessary to make the system resume properly were figured out by trial-and-error. The code as it stands now is the minimum that has to be done to put the musb host system on an AM33xx system into an operable state after resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:04 +02:00
dmaengine: cppi41: mark PM functions as __maybe_unused When CONFIG_PM_SLEEP is disabled, we get a build error in the cppi41 dmaengine driver, since the runtime-pm functions are hidden within the wrong #ifdef: drivers/dma/cppi41.c:1158:21: error: 'cppi41_runtime_suspend' undeclared here (not in a function) This removes the #ifdef and instead uses __maybe_unused annotations that cannot have this problem. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-06 15:20:05 +02:00
dma: cppi41: add support for suspend and resume This patch adds support for suspend/resume functionality to the cppi41 DMA driver. The steps necessary to make the system resume properly were figured out by trial-and-error. The code as it stands now is the minimum that has to be done to put the musb host system on an AM33xx system into an operable state after resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:04 +02:00
dma: cppi41: restore more registers With active users over suspend/resume cycles, it turns out that more registers, in particular DMA_TDFDQ and RXHPCRA0, have to be restored on resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:03 +02:00
dma: cppi41: add support for suspend and resume This patch adds support for suspend/resume functionality to the cppi41 DMA driver. The steps necessary to make the system resume properly were figured out by trial-and-error. The code as it stands now is the minimum that has to be done to put the musb host system on an AM33xx system into an operable state after resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:04 +02:00
dma: cppi41: restore more registers With active users over suspend/resume cycles, it turns out that more registers, in particular DMA_TDFDQ and RXHPCRA0, have to be restored on resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:03 +02:00
dma: cppi41: add support for suspend and resume This patch adds support for suspend/resume functionality to the cppi41 DMA driver. The steps necessary to make the system resume properly were figured out by trial-and-error. The code as it stands now is the minimum that has to be done to put the musb host system on an AM33xx system into an operable state after resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:04 +02:00
dma: cppi41: restore more registers With active users over suspend/resume cycles, it turns out that more registers, in particular DMA_TDFDQ and RXHPCRA0, have to be restored on resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-22 12:14:03 +02:00
dma: cppi41: add support for suspend and resume This patch adds support for suspend/resume functionality to the cppi41 DMA driver. The steps necessary to make the system resume properly were figured out by trial-and-error. The code as it stands now is the minimum that has to be done to put the musb host system on an AM33xx system into an operable state after resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:04 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dmaengine: cppi41: mark PM functions as __maybe_unused When CONFIG_PM_SLEEP is disabled, we get a build error in the cppi41 dmaengine driver, since the runtime-pm functions are hidden within the wrong #ifdef: drivers/dma/cppi41.c:1158:21: error: 'cppi41_runtime_suspend' undeclared here (not in a function) This removes the #ifdef and instead uses __maybe_unused annotations that cannot have this problem. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-06 15:20:05 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dmaengine: cppi41: mark PM functions as __maybe_unused When CONFIG_PM_SLEEP is disabled, we get a build error in the cppi41 dmaengine driver, since the runtime-pm functions are hidden within the wrong #ifdef: drivers/dma/cppi41.c:1158:21: error: 'cppi41_runtime_suspend' undeclared here (not in a function) This removes the #ifdef and instead uses __maybe_unused annotations that cannot have this problem. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-06 15:20:05 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dma: cppi41: add support for suspend and resume This patch adds support for suspend/resume functionality to the cppi41 DMA driver. The steps necessary to make the system resume properly were figured out by trial-and-error. The code as it stands now is the minimum that has to be done to put the musb host system on an AM33xx system into an operable state after resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:04 +02:00
dmaengine: cppi41: Add basic PM runtime support Let's keep the device enabled between cppi41_dma_issue_pending() and dmaengine_desc_get_callback_invoke() and rely on the PM runtime autoidle timeout elsewhere. As the PM runtime is for whole device, not for each channel, we need to queue pending transfers if the device is PM runtime suspended. Then we start the pending transfers in PM runtime resume. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31 07:19:59 -07:00
dma: cppi41: add support for suspend and resume This patch adds support for suspend/resume functionality to the cppi41 DMA driver. The steps necessary to make the system resume properly were figured out by trial-and-error. The code as it stands now is the minimum that has to be done to put the musb host system on an AM33xx system into an operable state after resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:04 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00
dma: cppi41: add support for suspend and resume This patch adds support for suspend/resume functionality to the cppi41 DMA driver. The steps necessary to make the system resume properly were figured out by trial-and-error. The code as it stands now is the minimum that has to be done to put the musb host system on an AM33xx system into an operable state after resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-22 16:50:04 +02:00
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 12:13:04 +02:00