kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/md/md.h

741 lines
25 KiB
Raw Permalink Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
trival: md_k.h should be md.h in the beginning comment of file md.h Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-21 15:37:46 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: tiny md.h cleanups - update inclusion guard and make sure it covers the whole file - remove superflous #ifdef CONFIG_BLOCK - make sure all required headers are included so that new users aren't required to include others before Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
2009-04-14 12:01:53 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: tiny md.h cleanups - update inclusion guard and make sure it covers the whole file - remove superflous #ifdef CONFIG_BLOCK - make sure all required headers are included so that new users aren't required to include others before Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
2009-04-14 12:01:53 +10:00
writeback: separate out include/linux/backing-dev-defs.h With the planned cgroup writeback support, backing-dev related declarations will be more widely used across block and cgroup; unfortunately, including backing-dev.h from include/linux/blkdev.h makes cyclic include dependency quite likely. This patch separates out backing-dev-defs.h which only has the essential definitions and updates blkdev.h to include it. c files which need access to more backing-dev details now include backing-dev.h directly. This takes backing-dev.h off the common include dependency chain making it a lot easier to use it across block and cgroup. v2: fs/fat build failure fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22 17:13:32 -04:00
md: convert to use the generic badblocks code Retain badblocks as part of rdev, but use the accessor functions from include/linux/badblocks for all manipulation. Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-12-24 19:20:34 -07:00
md: tiny md.h cleanups - update inclusion guard and make sure it covers the whole file - remove superflous #ifdef CONFIG_BLOCK - make sure all required headers are included so that new users aren't required to include others before Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
2009-04-14 12:01:53 +10:00
Introduce md_cluster_operations to handle cluster functions This allows dynamic registering of cluster hooks. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-29 10:01:53 -05:00
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:45:40 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Use REQ_FAILFAST_* on metadata writes where appropriate This can only be supported on personalities which ensure that md_error() never causes an array to enter the 'failed' state. i.e. if marking a device Faulty would cause some data to be inaccessible, the device is status is left as non-Faulty. This is true for RAID1 and RAID10. If we get a failure writing metadata but the device doesn't fail, it must be the last device so we re-write without FAILFAST to improve chance of success. We also flag the device as LastDev so that future metadata updates don't waste time on failfast writes. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:11 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Represent raid device size in sectors. This patch renames the "size" field of struct mdk_rdev_s to "sectors" and changes this field to store sectors instead of blocks. All users of this field, linear.c, raid0.c and md.c, are fixed up accordingly which gets rid of many multiplications and divisions. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:33:13 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: Fix is_mddev_idle test (again). There are two problems with is_mddev_idle. 1/ sync_io is 'atomic_t' and hence 'int'. curr_events and all the rest are 'long'. So if sync_io were to wrap on a 64bit host, the value of curr_events would go very negative suddenly, and take a very long time to return to positive. So do all calculations as 'int'. That gives us plenty of precision for what we need. 2/ To initialise rdev->last_events we simply call is_mddev_idle, on the assumption that it will make sure that last_events is in a suitable range. It used to do this, but now it does not. So now we need to be more explicit about initialisation. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:27:02 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: separate meta and data devs Allow the metadata to be on a separate device from the data. This doesn't mean the data and metadata will by on separate physical devices - it simply gives device-mapper and userspace tools more flexibility. Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-14 09:14:34 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: load/store badblock list from v1.x metadata Space must have been allocated when array was created. A feature flag is set when the badblock list is non-empty, to ensure old kernels don't load and trust the whole device. We only update the on-disk badblocklist when it has changed. If the badblocklist (or other metadata) is stored on a bad block, we don't cope very well. If metadata has no room for bad block, flag bad-blocks as disabled, and do the same for 0.90 metadata. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:31:47 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: Don't write dirty/clean update to spares - leave them alone - record the 'event' count on each individual device (they might sometimes be slightly different now) - add a new value for 'sb_dirty': '3' means that the super block only needs to be updated to record a clean<->dirty transition. - Prefer odd event numbers for dirty states and even numbers for clean states - Using all the above, don't update the superblock on a spare device if the update is just doing a clean-dirty transition. To accomodate this, a transition from dirty back to clean might now decrement the events counter if nothing else has changed. The net effect of this is that spare drives will not see any IO requests during normal running of the array, so they can go to sleep if that is what they want to do. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: add possibility to change data-offset for devices. When reshaping we can avoid costly intermediate backup by changing the 'start' address of the array on the device (if there is enough room). So as a first step, allow such a change to be requested through sysfs, and recorded in v1.x metadata. (As we didn't previous check that all 'pad' fields were zero, we need a new FEATURE flag for this. A (belatedly) check that all remaining 'pad' fields are zero to avoid a repeat of this) The new data offset must be requested separately for each device. This allows each to have a different change in the data offset. This is not likely to be used often but as data_offset can be set per-device, new_data_offset should be too. This patch also removes the 'acknowledged' arg to rdev_set_badblocks as it is never used and never will be. At the same time we add a new arg ('in_new') which is currently always zero but will be used more soon. When a reshape finishes we will need to update the data_offset and rdev->sectors. So provide an exported function to do that. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:27:00 +10:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
[PATCH] md: limit size of sb read/written to appropriate amount version-1 superblocks are not (normally) 4K long, and can be of variable size. Writing the full 4K can cause corruption (but only in non-default configurations). With this patch the super-block-flavour can choose a size to read, and set a size to write based on what it finds. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 16:23:53 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: extend md sysfs support to component devices. Each device in an md array how has a corresponding /sys/block/mdX/md/devNN/ directory which can contain attributes. Currently there is only 'state' which summarises the state, nd 'super' which has a copy of the superblock, and 'block' which is a symlink to the block device. Also, /sys/block/mdX/md/rdNN represents slot 'NN' in the array, and is a symlink to the relevant 'devNN'. Obviously spare devices do not have a slot in the array, and so don't have such a symlink. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:24 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: create externally visible flags for supporting hot-replace. hot-replace is a feature being added to md which will allow a device to be replaced without removing it from the array first. With hot-replace a spare can be activated and recovery can start while the original device is still in place, thus allowing a transition from an unreliable device to a reliable device without leaving the array degraded during the transition. It can also be use when the original device is still reliable but it not wanted for some reason. This will eventually be supported in RAID4/5/6 and RAID10. This patch adds a super-block flag to distinguish the replacement device. If an old kernel sees this flag it will reject the device. It also adds two per-device flags which are viewable and settable via sysfs. "want_replacement" can be set to request that a device be replaced. "replacement" is set to show that this device is replacing another device. The "rd%d" links in /sys/block/mdXx/md only apply to the original device, not the replacement. We currently don't make links for the replacement - there doesn't seem to be a need. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:51 +11:00
md: support blocking writes to an array on device failure Allows a userspace metadata handler to take action upon detecting a device failure. Based on an original patch by Neil Brown. Changes: -added blocked_wait waitqueue to rdev -don't qualify Blocked with Faulty always let userspace block writes -added md_wait_for_blocked_rdev to wait for the block device to be clear, if userspace misses the notification another one is sent every 5 seconds -set MD_RECOVERY_NEEDED after clearing "blocked" -kill DoBlock flag, just test mddev->external Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 00:52:32 -07:00
[PATCH] md: support write-mostly device in raid1 This allows a device in a raid1 to be marked as "write mostly". Read requests will only be sent if there is no other option. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 16:23:45 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: fix handling of array level takeover that re-arranges devices. Most array level changes leave the list of devices largely unchanged, possibly causing one at the end to become redundant. However conversions between RAID0 and RAID10 need to renumber all devices (except 0). This renumbering is currently being done in the ->run method when the new personality takes over. However this is too late as the common code in md.c might already have invalidated some of the devices if they had a ->raid_disk number that appeared to high. Moving it into the ->takeover method is too early as the array is still active at that time and wrong ->raid_disk numbers could cause confusion. So add a ->new_raid_disk field to mdk_rdev_s and use it to communicate the new raid_disk number. Now the common code knows exactly which devices need to be renumbered, and which can be invalidated, and can do it all at a convenient time when the array is suspend. It can also update some symlinks in sysfs which previously were not be updated correctly. Reported-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-15 09:36:03 +01:00
[PATCH] md: optimise reconstruction when re-adding a recently failed drive. When an array is degraded, bit in the intent-bitmap are never cleared. So if a recently failed drive is re-added, we only need to reconstruct the block that are still reflected in the bitmap. This patch adds support for this re-adding. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:25 -07:00
md: override md superblock recovery_offset for journal device Journal device stores data in a log structure. We need record the log start. Here we override md superblock recovery_offset for this purpose. This field of a journal device is meaningless otherwise. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-13 14:31:56 -07:00
[PATCH] md: allow checkpoint of recovery with version-1 superblock For a while we have had checkpointing of resync. The version-1 superblock allows recovery to be checkpointed as well, and this patch implements that. Due to early carelessness we need to add a feature flag to signal that the recovery_offset field is in use, otherwise older kernels would assume that a partially recovered array is in fact fully recovered. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:40 -07:00
md: override md superblock recovery_offset for journal device Journal device stores data in a log structure. We need record the log start. Here we override md superblock recovery_offset for this purpose. This field of a journal device is meaningless otherwise. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-13 14:31:56 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: improvements to raid5 handling of read errors Two refinements to the 'attempt-overwrite-on-read-error' mechanism. 1/ If the array is read-only, don't attempt an over-write. 2/ If there are more than max_nr_stripes read errors on a device with no success, fail the drive. This will make sure a dead drive will be eventually kicked even when we aren't trying to rewrite (which would normally kick a dead drive more quickly. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:31 -08:00
md: use seconds granularity for error logging The md code stores the exact time of the last error in the last_read_error variable using a timespec structure. It only ever uses the seconds portion of that though, so we can use a scalar for it. There won't be an overflow in 2038 here, because it already used monotonic time and 32-bit is enough for that, but I've decided to use time64_t for consistency in the conversion. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-17 17:33:10 +02:00
raid: improve MD/raid10 handling of correctable read errors. We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: Robert Becker <Rob.Becker@riverbed.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:58 +11:00
[PATCH] md: count corrected read errors per drive Store this total in superblock (As appropriate), and make it available to userspace via sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:52 -08:00
[PATCH] md: avoid a deadlock when removing a device from an md array via sysfs A device can be removed from an md array via e.g. echo remove > /sys/block/md3/md/dev-sde/state This will try to remove the 'dev-sde' subtree which will deadlock since commit e7b0d26a86943370c04d6833c6edba2a72a6e240 With this patch we run the kobject_del via schedule_work so as to avoid the deadlock. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-04 19:08:18 -07:00
md: use sysfs_notify_dirent to notify changes to md/dev-xxx/state The 'state' file for a device reports, for example, when the device has failed. Changes should be reported to userspace ASAP without the possibility of blocking on low-memory. sysfs_notify does have that possibility (as it takes a mutex which can be held across a kmalloc) so use sysfs_notify_dirent instead. Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-21 13:25:28 +11:00
kernfs: s/sysfs_dirent/kernfs_node/ and rename its friends accordingly kernfs has just been separated out from sysfs and we're already in full conflict mode. Nothing can make the situation any worse. Let's take the chance to name things properly. This patch performs the following renames. * s/sysfs_elem_dir/kernfs_elem_dir/ * s/sysfs_elem_symlink/kernfs_elem_symlink/ * s/sysfs_elem_attr/kernfs_elem_file/ * s/sysfs_dirent/kernfs_node/ * s/sd/kn/ in kernfs proper * s/parent_sd/parent/ * s/target_sd/target/ * s/dir_sd/parent/ * s/to_sysfs_dirent()/rb_to_kn()/ * misc renames of local vars when they conflict with the above Because md, mic and gpio dig into sysfs details, this patch ends up modifying them. All are sysfs_dirent renames and trivial. While we can avoid these by introducing a dummy wrapping struct sysfs_dirent around kernfs_node, given the limited usage outside kernfs and sysfs proper, I don't think such workaround is called for. This patch is strictly rename only and doesn't introduce any functional difference. - mic / gpio renames were missing. Spotted by kbuild test robot. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Neil Brown <neilb@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11 14:11:53 -05:00
md: use sysfs_notify_dirent to notify changes to md/dev-xxx/state The 'state' file for a device reports, for example, when the device has failed. Changes should be reported to userspace ASAP without the possibility of blocking on low-memory. sysfs_notify does have that possibility (as it takes a mutex which can be held across a kmalloc) so use sysfs_notify_dirent instead. Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-21 13:25:28 +11:00
md: beginnings of bad block management. This the first step in allowing md to track bad-blocks per-device so that we can fail individual blocks rather than the whole device. This patch just adds a data structure for recording bad blocks, with routines to add, remove, search the list. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
2011-07-28 11:31:46 +10:00
md: convert to use the generic badblocks code Retain badblocks as part of rdev, but use the accessor functions from include/linux/badblocks for all manipulation. Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-12-24 19:20:34 -07:00
md: superblock changes for PPL Include information about PPL location and size into mdp_superblock_1 and copy it to/from rdev. Because PPL is mutually exclusive with bitmap, put it in place of 'bitmap_offset'. Add a new flag MD_FEATURE_PPL for 'feature_map', analogically to MD_FEATURE_BITMAP_OFFSET. Add MD_HAS_PPL to mddev->flags to indicate that PPL is enabled on an array. Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09 09:59:57 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: create externally visible flags for supporting hot-replace. hot-replace is a feature being added to md which will allow a device to be replaced without removing it from the array first. With hot-replace a spare can be activated and recovery can start while the original device is still in place, thus allowing a transition from an unreliable device to a reliable device without leaving the array degraded during the transition. It can also be use when the original device is still reliable but it not wanted for some reason. This will eventually be supported in RAID4/5/6 and RAID10. This patch adds a super-block flag to distinguish the replacement device. If an old kernel sees this flag it will reject the device. It also adds two per-device flags which are viewable and settable via sysfs. "want_replacement" can be set to request that a device be replaced. "replacement" is set to show that this device is replacing another device. The "rd%d" links in /sys/block/mdXx/md only apply to the original device, not the replacement. We currently don't make links for the replacement - there doesn't seem to be a need. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:51 +11:00
md: fix problem when adding device to read-only array with bitmap. If an array is started degraded, and then the missing device is found it can be re-added and a minimal bitmap-based recovery will bring it fully up-to-date. If the array is read-only a recovery would not be allowed. But also if the array is read-only and the missing device was present very recently, then there could be no need for any recovery at all, so we simply include the device in the read-only array without any recovery. However... if the missing device was removed a little longer ago it could be missing some updates, but if a bitmap is present it will be conditionally accepted pending a bitmap-based update. We don't currently detect this case properly and will include that old device into the read-only array with no recovery even though it really needs a recovery. This patch keeps track of whether a bitmap-based-recovery is really needed or not in the new Bitmap_sync rdev flag. If that is set, then the device will not be added to a read-only array. Cc: Andrei Warkentin <andreiw@vmware.com> Fixes: d70ed2e4fafdbef0800e73942482bb075c21578b Cc: stable@vger.kernel.org (3.2+) Signed-off-by: NeilBrown <neilb@suse.de>
2013-12-12 10:13:33 +11:00
md/bitmap: don't read page from device with Bitmap_sync The device owns Bitmap_sync flag needs recovery to become in sync, and read page from this type device could get stale status. Also add comments for Bitmap_sync bit per the suggestion from Shaohua and Neil. Previous disscussion can be found here: https://marc.info/?t=149760428900004&r=1&w=2 Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-07-04 11:20:30 +08:00
md: fix problem when adding device to read-only array with bitmap. If an array is started degraded, and then the missing device is found it can be re-added and a minimal bitmap-based recovery will bring it fully up-to-date. If the array is read-only a recovery would not be allowed. But also if the array is read-only and the missing device was present very recently, then there could be no need for any recovery at all, so we simply include the device in the read-only array without any recovery. However... if the missing device was removed a little longer ago it could be missing some updates, but if a bitmap is present it will be conditionally accepted pending a bitmap-based update. We don't currently detect this case properly and will include that old device into the read-only array with no recovery even though it really needs a recovery. This patch keeps track of whether a bitmap-based-recovery is really needed or not in the new Bitmap_sync rdev flag. If that is set, then the device will not be added to a read-only array. Cc: Andrei Warkentin <andreiw@vmware.com> Fixes: d70ed2e4fafdbef0800e73942482bb075c21578b Cc: stable@vger.kernel.org (3.2+) Signed-off-by: NeilBrown <neilb@suse.de>
2013-12-12 10:13:33 +11:00
md: create externally visible flags for supporting hot-replace. hot-replace is a feature being added to md which will allow a device to be replaced without removing it from the array first. With hot-replace a spare can be activated and recovery can start while the original device is still in place, thus allowing a transition from an unreliable device to a reliable device without leaving the array degraded during the transition. It can also be use when the original device is still reliable but it not wanted for some reason. This will eventually be supported in RAID4/5/6 and RAID10. This patch adds a super-block flag to distinguish the replacement device. If an old kernel sees this flag it will reject the device. It also adds two per-device flags which are viewable and settable via sysfs. "want_replacement" can be set to request that a device be replaced. "replacement" is set to show that this device is replacing another device. The "rd%d" links in /sys/block/mdXx/md only apply to the original device, not the replacement. We currently don't make links for the replacement - there doesn't seem to be a need. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:51 +11:00
Add new disk to clustered array Algorithm: 1. Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues ioctl(ADD_NEW_DISC with disc.state set to MD_DISK_CLUSTER_ADD) 2. Node 1 sends NEWDISK with uuid and slot number 3. Other nodes issue kobject_uevent_env with uuid and slot number (Steps 4,5 could be a udev rule) 4. In userspace, the node searches for the disk, perhaps using blkid -t SUB_UUID="" 5. Other nodes issue either of the following depending on whether the disk was found: ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CANDIDATE and disc.number set to slot number) ioctl(CLUSTERED_DISK_NACK) 6. Other nodes drop lock on no-new-devs (CR) if device is found 7. Node 1 attempts EX lock on no-new-devs 8. If node 1 gets the lock, it sends METADATA_UPDATED after unmarking the disk as SpareLocal 9. If not (get no-new-dev lock), it fails the operation and sends METADATA_UPDATED 10. Other nodes understand if the device is added or not by reading the superblock again after receiving the METADATA_UPDATED message. Signed-off-by: Lidong Zhong <lzhong@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-10-29 18:51:31 -05:00
MD: add a new disk role to present write journal device Next patches will use a disk as raid5/6 journaling. We need a new disk role to present the journal device and add MD_FEATURE_JOURNAL to feature_map for backward compability. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-13 14:31:55 -07:00
md-cluster: remove a disk asynchronously from cluster environment For cluster raid, if one disk couldn't be reach in one node, then other nodes would receive the REMOVE message for the disk. In receiving node, we can't call md_kick_rdev_from_array to remove the disk from array synchronously since the disk might still be busy in this node. So let's set a ClusterRemove flag on the disk, then let the thread to do the removal job eventually. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-12-21 10:50:59 +11:00
md: reduce the number of synchronize_rcu() calls when multiple devices fail. Every time a device is removed with ->hot_remove_disk() a synchronize_rcu() call is made which can delay several milliseconds in some case. If lots of devices fail at once - as could happen with a large RAID10 where one set of devices are removed all at once - these delays can add up to be very inconcenient. As failure is not reversible we can check for that first, setting a separate flag if it is found, and then all synchronize_rcu() once for all the flagged devices. Then ->hot_remove_disk() function can skip the synchronize_rcu() step if the flag is set. fix build error(Shaohua) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-02 16:19:53 +10:00
md: add bad block support for external metadata Add new rdev flag which external metadata handler can use to switch on/off bad block support. If new bad block is encountered, notify it via rdev 'unacknowledged_bad_blocks' sysfs file. If bad block has been cleared, notify update to rdev 'bad_blocks' sysfs file. When bad blocks support is being removed, just clear rdev flag. It is not necessary to reset badblocks->shift field. If there are bad blocks cleared or added at the same time, it is ok for those changes to be applied to the structure. The array is in blocked state and the drive which cannot handle bad blocks any more will be removed from the array before it is unlocked. Simplify state_show function by adding a separator at the end of each string and overwrite last separator with new line. Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-10-21 16:26:57 +02:00
md/failfast: add failfast flag for md to be used by some personalities. This patch just adds a 'failfast' per-device flag which can be stored in v0.90 or v1.x metadata. The flag is not used yet but the intent is that it can be used for mirrored (raid1/raid10) arrays where low latency is more important than keeping all devices on-line. Setting the flag for a device effectively gives permission for that device to be marked as Faulty and excluded from the array on the first error. The underlying driver will be directed not to retry requests that result in failures. There is a proviso that the device must not be marked faulty if that would cause the array as a whole to fail, it may only be marked Faulty if the array remains functional, but is degraded. Failures on read requests will cause the device to be marked as Faulty immediately so that further reads will avoid that device. No attempt will be made to correct read errors by over-writing with the correct data. It is expected that if transient errors, such as cable unplug, are possible, then something in user-space will revalidate failed devices and re-add them when they appear to be working again. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:11 +11:00
md: Use REQ_FAILFAST_* on metadata writes where appropriate This can only be supported on personalities which ensure that md_error() never causes an array to enter the 'failed' state. i.e. if marking a device Faulty would cause some data to be inaccessible, the device is status is left as non-Faulty. This is true for RAID1 and RAID10. If we get a failure writing metadata but the device doesn't fail, it must be the last device so we re-write without FAILFAST to improve chance of success. We also flag the device as LastDev so that future metadata updates don't waste time on failfast writes. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:11 +11:00
md: create externally visible flags for supporting hot-replace. hot-replace is a feature being added to md which will allow a device to be replaced without removing it from the array first. With hot-replace a spare can be activated and recovery can start while the original device is still in place, thus allowing a transition from an unreliable device to a reliable device without leaving the array degraded during the transition. It can also be use when the original device is still reliable but it not wanted for some reason. This will eventually be supported in RAID4/5/6 and RAID10. This patch adds a super-block flag to distinguish the replacement device. If an old kernel sees this flag it will reject the device. It also adds two per-device flags which are viewable and settable via sysfs. "want_replacement" can be set to request that a device be replaced. "replacement" is set to show that this device is replacing another device. The "rd%d" links in /sys/block/mdXx/md only apply to the original device, not the replacement. We currently don't make links for the replacement - there doesn't seem to be a need. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:51 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
md: beginnings of bad block management. This the first step in allowing md to track bad-blocks per-device so that we can fail individual blocks rather than the whole device. This patch just adds a data structure for recording bad blocks, with routines to add, remove, search the list. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
2011-07-28 11:31:46 +10:00
md: convert to use the generic badblocks code Retain badblocks as part of rdev, but use the accessor functions from include/linux/badblocks for all manipulation. Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-12-24 19:20:34 -07:00
md: beginnings of bad block management. This the first step in allowing md to track bad-blocks per-device so that we can fail individual blocks rather than the whole device. This patch just adds a data structure for recording bad blocks, with routines to add, remove, search the list. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
2011-07-28 11:31:46 +10:00
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
md: add possibility to change data-offset for devices. When reshaping we can avoid costly intermediate backup by changing the 'start' address of the array on the device (if there is enough room). So as a first step, allow such a change to be requested through sysfs, and recorded in v1.x metadata. (As we didn't previous check that all 'pad' fields were zero, we need a new FEATURE flag for this. A (belatedly) check that all remaining 'pad' fields are zero to avoid a repeat of this) The new data offset must be requested separately for each device. This allows each to have a different change in the data offset. This is not likely to be used often but as data_offset can be set per-device, new_data_offset should be too. This patch also removes the 'acknowledged' arg to rdev_set_badblocks as it is never used and never will be. At the same time we add a new arg ('in_new') which is currently always zero but will be used more soon. When a reshape finishes we will need to update the data_offset and rdev->sectors. So provide an exported function to do that. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:27:00 +10:00
Introduce md_cluster_info md_cluster_info stores the cluster information in the MD device. The join() is called when mddev detects it is a clustered device. The main responsibilities are: 1. Setup a DLM lockspace 2. Setup all initial locks such as super block locks and bitmap lock (will come later) The leave() clears up the lockspace and all the locks held. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-29 10:20:02 -05:00
md: cleanup mddev flag clear for takeover Commit 6995f0b (md: takeover should clear unrelated bits) clear unrelated bits, but it's quite fragile. To avoid error in the future, define a macro for unsupported mddev flags for each raid type and use it to clear unsupported mddev flags. This should be less error-prone. Suggested-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-01-04 16:10:19 -08:00
md: define mddev flags, recovery flags and r1bio state bits using enums This is less error prone than using individual #defines. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-09 10:21:33 +11:00
md: Use REQ_FAILFAST_* on metadata writes where appropriate This can only be supported on personalities which ensure that md_error() never causes an array to enter the 'failed' state. i.e. if marking a device Faulty would cause some data to be inaccessible, the device is status is left as non-Faulty. This is true for RAID1 and RAID10. If we get a failure writing metadata but the device doesn't fail, it must be the last device so we re-write without FAILFAST to improve chance of success. We also flag the device as LastDev so that future metadata updates don't waste time on failfast writes. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:11 +11:00
md: superblock changes for PPL Include information about PPL location and size into mdp_superblock_1 and copy it to/from rdev. Because PPL is mutually exclusive with bitmap, put it in place of 'bitmap_offset'. Add a new flag MD_FEATURE_PPL for 'feature_map', analogically to MD_FEATURE_BITMAP_OFFSET. Add MD_HAS_PPL to mddev->flags to indicate that PPL is enabled on an array. Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09 09:59:57 +01:00
md: Runtime support for multiple ppls Increase PPL area to 1MB and use it as circular buffer to store PPL. The entry with highest generation number is the latest one. If PPL to be written is larger then space left in a buffer, rewind the buffer to the start (don't wrap it). Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com> Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-08-16 17:13:45 +02:00
md: define mddev flags, recovery flags and r1bio state bits using enums This is less error prone than using individual #defines. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-09 10:21:33 +11:00
md: separate flags for superblock changes The mddev->flags are used for different purposes. There are a lot of places we check/change the flags without masking unrelated flags, we could check/change unrelated flags. These usage are most for superblock write, so spearate superblock related flags. This should make the code clearer and also fix real bugs. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08 15:48:19 -08:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: rename "mdk_personality" to "md_personality" "mdk" doesn't mean anything any more. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:58 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Don't test all of mddev->flags at once. mddev->flags is mostly used to record if an update of the metadata is needed. Sometimes the whole field is tested instead of just the important bits. This makes it difficult to introduce more state bits. So replace all bare tests of mddev->flags with tests for the bits that actually need testing. Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-27 16:28:23 +10:00
[PATCH] md: replace magic numbers in sb_dirty with well defined bit flags Instead of magic numbers (0,1,2,3) in sb_dirty, we have some flags instead: MD_CHANGE_DEVS Some device state has changed requiring superblock update on all devices. MD_CHANGE_CLEAN The array has transitions from 'clean' to 'dirty' or back, requiring a superblock update on active devices, but possibly not on spares MD_CHANGE_PENDING A superblock update is underway. We wait for an update to complete by waiting for all flags to be clear. A flag can be set at any time, even during an update, without risk that the change will be lost. Stop exporting md_update_sb - isn't needed. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:46 -07:00
md: separate flags for superblock changes The mddev->flags are used for different purposes. There are a lot of places we check/change the flags without masking unrelated flags, we could check/change unrelated flags. These usage are most for superblock write, so spearate superblock related flags. This should make the code clearer and also fix real bugs. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08 15:48:19 -08:00
[PATCH] md: replace magic numbers in sb_dirty with well defined bit flags Instead of magic numbers (0,1,2,3) in sb_dirty, we have some flags instead: MD_CHANGE_DEVS Some device state has changed requiring superblock update on all devices. MD_CHANGE_CLEAN The array has transitions from 'clean' to 'dirty' or back, requiring a superblock update on active devices, but possibly not on spares MD_CHANGE_PENDING A superblock update is underway. We wait for an update to complete by waiting for all flags to be clear. A flag can be set at any time, even during an update, without risk that the change will be lost. Stop exporting md_update_sb - isn't needed. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 01:15:46 -07:00
md: enable suspend/resume of md devices. To be able to change the 'level' of an md/raid array, we need to suspend the device so that no requests are active - then move some pointers around etc. The code already keeps counts of active requests and the ->quiesce function can be used to wait until those counts hit zero. However the quiesce function blocks new requests once they are all ready 'inside' the personality module, and that is too late if we want to replace the personality modules. So make all md requests come in through a common md_make_request function that keeps track of how many requests have entered the modules but may not yet be on the internal reference counts. Allow md_make_request to be blocked when we want to suspend the device, and make it possible to wait for all those in-transit requests to be added to internal lists so that ->quiesce can wait for them. There is still a problem that when a request completes, we drop the ref count inside the personality code so there is a short time between when the refcount hits zero, and when the personality code is no longer being used. The personality code never blocks (schedule or spinlock) between dropping the refcount and exiting the routine, so this should be safe (as put_module calls synchronize_sched() before unmapping the module code). Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:39:39 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: fix another deadlock with removing sysfs attributes. Move the deletion of sysfs attributes from reconfig_mutex to open_mutex didn't really help as a process can try to take open_mutex while holding reconfig_mutex, so the same deadlock can happen, just requiring one more process to be involved in the chain. I looks like I cannot easily use locking to wait for the sysfs deletion to complete, so don't. The only things that we cannot do while the deletions are still pending is other things which can change the sysfs namespace: run, takeover, stop. Each of these can fail with -EBUSY. So set a flag while doing a sysfs deletion, and fail run, takeover, stop if that flag is set. This is suitable for 2.6.35.x Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2010-08-08 21:18:03 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: initial sysfs support for md Start using kobjects in mddevs, and provide a couple of simple attributes (level and disks). Attributes live in /sys/block/mdX/md/attr-name Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:23 -08:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
md: Allow md devices to be created by name. Using sequential numbers to identify md devices is somewhat artificial. Using names can be a lot more user-friendly. Also, creating md devices by opening the device special file is a bit awkward. So this patch provides a new option for creating and naming devices. Writing a name such as "md_home" to /sys/modules/md_mod/parameters/new_array will cause an array with that name to be created. It will appear in /sys/block/ /proc/partitions and /proc/mdstat as 'md_home'. It will have an arbitrary minor number allocated. md devices that a created by an open are destroyed on the last close when the device is inactive. For named md devices, they will not be destroyed until the array is explicitly stopped, either with the STOP_ARRAY ioctl or by writing 'clear' to /sys/block/md_XXXX/md/array_state. The name of the array must start 'md_' to avoid conflict with other devices. Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
[PATCH] md: initial sysfs support for md Start using kobjects in mddevs, and provide a couple of simple attributes (level and disks). Attributes live in /sys/block/mdX/md/attr-name Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:23 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
md: support 'external' metadata for md arrays - Add a state flag 'external' to indicate that the metadata is managed externally (by user-space) so important changes need to be left of user-space to handle. Alternates are non-persistant ('none') where there is no stable metadata - after the array is stopped there is no record of it's status - and internal which can be version 0.90 or version 1.x These are selected by writing to the 'metadata' attribute. - move the updating of superblocks (sync_sbs) to after we have checked if there are any superblocks or not. - New array state 'write_pending'. This means that the metadata records the array as 'clean', but a write has been requested, so the metadata has to be updated to record a 'dirty' array before the write can continue. This change is reported to md by writing 'active' to the array_state attribute. - tidy up marking of sb_dirty: - don't set sb_dirty when resync finishes as md_check_recovery calls md_update_sb when the sync thread finishes anyway. - Don't set sb_dirty in multipath_run as the array might not be dirty. - don't mark superblock dirty when switching to 'clean' if there is no internal superblock (if external, userspace can choose to update the superblock whenever it chooses to). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 01:39:51 -08:00
md: Make mddev->chunk_size sector-based. This patch renames the chunk_size field to chunk_sectors with the implied change of semantics. Since is_power_of_2(chunk_size) = is_power_of_2(chunk_sectors << 9) = is_power_of_2(chunk_sectors) these bits don't need an adjustment for the shift. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 08:45:01 +10:00
drivers: md: use ktime_get_real_seconds() get_seconds() API is not y2038 safe on 32 bit systems and the API is deprecated. Replace it with calls to ktime_get_real_seconds() API instead. Change mddev structure types to time64_t accordingly. 32 bit signed timestamps will overflow in the year 2038. Change the user interface mdu_array_info_s structure timestamps: ctime and utime values used in ioctls GET_ARRAY_INFO and SET_ARRAY_INFO to unsigned int. This will extend the field to last until the year 2106. The long term plan is to get rid of ctime and utime values in this structure as this information can be read from the on-disk meta data directly. Clamp the tim64_t timestamps to positive values with a max of U32_MAX when returning from GET_ARRAY_INFO ioctl to accommodate above changes in the data type of timestamps to unsigned int. v0.90 on disk meta data uses u32 for maintaining time stamps. So this will also last until year 2106. Assumption is that the usage of v0.90 will be deprecated by year 2106. Timestamp fields in the on disk meta data for v1.0 version already use 64 bit data types. Remove the truncation of the bits while writing to or reading from these from the disk. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NeilBrown <neilb@suse.com>
2015-12-21 10:51:01 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: allow array level to be set textually via sysfs Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:51 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
md: Make mddev->size sector-based. This patch renames the "size" field of struct mddev_s to "dev_sectors" and stores the number of 512-byte sectors instead of the number of 1K-blocks in it. All users of that field, including raid levels 1,4-6,10, are adjusted accordingly. This simplifies the code a bit because it allows to get rid of a couple of divisions/multiplications by two. In order to make checkpatch happy, some minor coding style issues have also been addressed. In particular, size_store() now uses strict_strtoull() instead of simple_strtoull(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:33:13 +11:00
md: Make mddev->array_size sector-based. This patch renames the array_size field of struct mddev_s to array_sectors and converts all instances to use units of 512 byte sectors instead of 1k blocks. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21 17:05:22 +10:00
md: 'array_size' sysfs attribute Allow userspace to set the size of the array according to the following semantics: 1/ size must be <= to the size returned by mddev->pers->size(mddev, 0, 0) a) If size is set before the array is running, do_md_run will fail if size is greater than the default size b) A reshape attempt that reduces the default size to less than the set array size should be blocked 2/ once userspace sets the size the kernel will not change it 3/ writing 'default' to this attribute returns control of the size to the kernel and reverts to the size reported by the personality Also, convert locations that need to know the default size from directly reading ->array_sectors to <pers>_size. Resync/reshape operations always follow the default size. Finally, fixup other locations that read a number of 1k-blocks from userspace to use strict_blocks_to_sectors() which checks for unsigned long long to sector_t overflow and blocks to sectors overflow. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-31 15:00:31 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: simplify updating of event count to sometimes avoid updating spares. When updating the event count for a simple clean <-> dirty transition, we try to avoid updating the spares so they can safely spin-down. As the event_counts across an array must be +/- 1, this means decrementing the event_count on a dirty->clean transition. This is not always safe and we have to avoid the unsafe time. We current do this with a misguided idea about it being safe or not depending on whether the event_count is odd or even. This approach only works reliably in a few common instances, but easily falls down. So instead, simply keep internal state concerning whether it is safe or not, and always assume it is not safe when an array is first assembled. Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 09:28:43 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: Checkpoint and allow restart of raid5 reshape We allow the superblock to record an 'old' and a 'new' geometry, and a position where any conversion is up to. The geometry allows for changing chunksize, layout and level as well as number of devices. When using verion-0.90 superblock, we convert the version to 0.91 while the conversion is happening so that an old kernel will refuse the assemble the array. For version-1, we use a feature bit for the same effect. When starting an array we check for an incomplete reshape and restart the reshape process if needed. If the reshape stopped at an awkward time (like when updating the first stripe) we refuse to assemble the array, and let user-space worry about it. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 01:18:11 -08:00
md: Convert mddev->new_chunk to sectors. A straight-forward conversion which gets rid of some multiplications/divisions/shifts. The patch also introduces a couple of new ones, most of which are due to conf->chunk_size still being represented in bytes. This will be cleaned up in subsequent patches. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 08:45:27 +10:00
md: allow a reshape operation to be reversed. Currently a reshape operation always progresses from the start of the array to the end unless the number of devices is being reduced, in which case it progressed in the opposite direction. To reverse a partial reshape which changes the number of devices you can stop the array and re-assemble with the raid-disks numbers reversed and it will undo. However for a reshape that does not change the number of devices it is not possible to reverse the reshape in the middle - you have to wait until it completes. So add a 'reshape_direction' attribute with is either 'forwards' or 'backwards' and can be explicitly set when delta_disks is zero. This will become more important when we allow the data_offset to change in a reshape. Then the explicit statement of what direction is being used will be more useful. This can be enabled in raid5 trivially as it already supports reverse reshape and just needs to use a different trigger to request it. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:27:00 +10:00
[PATCH] md: Checkpoint and allow restart of raid5 reshape We allow the superblock to record an 'old' and a 'new' geometry, and a position where any conversion is up to. The geometry allows for changing chunksize, layout and level as well as number of devices. When using verion-0.90 superblock, we convert the version to 0.91 while the conversion is happening so that an old kernel will refuse the assemble the array. For version-1, we use a feature bit for the same effect. When starting an array we check for an incomplete reshape and restart the reshape process if needed. If the reshape stopped at an awkward time (like when updating the first stripe) we refuse to assemble the array, and let user-space worry about it. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 01:18:11 -08:00
md: remove typedefs: mdk_thread_t -> struct md_thread Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:23 +11:00
MD: Remember the last sync operation that was performed MD: Remember the last sync operation that was performed This patch adds a field to the mddev structure to track the last sync operation that was performed. This is especially useful when it comes to what is recorded in mismatch_cnt in sysfs. If the last operation was "data-check", then it reports the number of descrepancies found by the user-initiated check. If it was a "repair" operation, then it is reporting the number of descrepancies repaired. etc. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-25 01:23:59 -05:00
[PATCH] md: fix resync speed calculation for restarted resyncs We introduced 'io_sectors' recently so we could count the sectors that causes io during resync separate from sectors which didn't cause IO - there can be a difference if a bitmap is being used to accelerate resync. However when a speed is reported, we find the number of sectors processed recently by subtracting an oldish io_sectors count from a current 'curr_resync' count. This is wrong because curr_resync counts all sectors, not just io sectors. So, add a field to mddev to store the curren io_sectors separately from curr_resync, and use that in the calculations. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 04:44:16 -07:00
md: occasionally checkpoint drive recovery to reduce duplicate effort after a crash Version 1.x metadata has the ability to record the status of a partially completed drive recovery. However we only update that record on a clean shutdown. It would be nice to update it on unclean shutdowns too, particularly when using a bitmap that removes much to the 'sync' effort after an unclean shutdown. One complication with checkpointing recovery is that we only know where we are up to in terms of IO requests started, not which ones have completed. And we need to know what has completed to record how much is recovered. So occasionally pause the recovery until all submitted requests are completed, then update the record of where we are up to. When we have a bitmap, we already do that pause occasionally to keep the bitmap up-to-date. So enhance that code to record the recovery offset and schedule a superblock update. And when there is no bitmap, just pause 16 times during the resync to do a checkpoint. '16' is a fairly arbitrary number. But we don't really have any good way to judge how often is acceptable, and it seems like a reasonable number for now. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:33:13 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: fix resync speed calculation for restarted resyncs We introduced 'io_sectors' recently so we could count the sectors that causes io during resync separate from sectors which didn't cause IO - there can be a difference if a bitmap is being used to accelerate resync. However when a speed is reported, we find the number of sectors processed recently by subtracting an oldish io_sectors count from a current 'curr_resync' count. This is wrong because curr_resync counts all sectors, not just io sectors. So, add a field to mddev to store the curren io_sectors separately from curr_resync, and use that in the calculations. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 04:44:16 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: teach raid5 the difference between 'check' and 'repair'. With this, raid5 can be asked to check parity without repairing it. It also keeps a count of the number of incorrect parity blocks found (mismatches) and reports them through sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:26 -08:00
Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid races Now that multiple threads can handle stripes, it is safer to use an atomic64_t for resync_mismatches, to avoid update races. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 14:17:59 +11:00
[PATCH] md: teach raid5 the difference between 'check' and 'repair'. With this, raid5 can be asked to check parity without repairing it. It also keeps a count of the number of incorrect parity blocks found (mismatches) and reports them through sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:26 -08:00
[PATCH] md: Support suspending of IO to regions of an md array This allows user-space to access data safely. This is needed for raid5 reshape as user-space needs to take a backup of the first few stripes before allowing reshape to commence. It will also be useful in cluster-aware raid1 configurations so that all cluster members can leave a section of the array untouched while a resync/recovery happens. A 'start' and 'end' of the suspended range are written to 2 sysfs attributes. Note that only one range can be suspended at a time. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 01:18:14 -08:00
[PATCH] md: allow sync-speed to be controlled per-device Also export current (average) speed and status in sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:21:36 -08:00
md: allow parallel resync of md-devices. In some configurations, a raid6 resync can be limited by CPU speed (Calculating P and Q and moving data) rather than by device speed. In these cases there is nothing to be gained byt serialising resync of arrays that share a device, and doing the resync in parallel can provide benefit. So add a sysfs tunable to flag an array as being allowed to resync in parallel with other arrays that use (a different part of) the same device. Signed-off-by: Bernd Schubert <bs@q-leap.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 13:04:38 -07:00
[PATCH] md: allow dirty raid[456] arrays to be started at boot See patch to md.txt for more details Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:15 -08:00
[PATCH] md: allow checkpoint of recovery with version-1 superblock For a while we have had checkpointing of resync. The version-1 superblock allows recovery to be checkpointed as well, and this patch implements that. Due to early carelessness we need to add a feature flag to signal that the recovery_offset field is in use, otherwise older kernels would assume that a partially recovered array is in fact fully recovered. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:40 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: change managed of recovery_disabled. If we hit a read error while recovering a mirror, we want to abort the recovery without necessarily failing the disk - as having a disk this a read error is better than not having an array at all. Currently this is managed with a per-array flag "recovery_disabled" and is only implemented for RAID1. For RAID10 we will need finer grained control as we might want to disable recovery for individual devices separately. So push more of the decision making into the personality. 'recovery_disabled' is now a 'cookie' which is copied when the personality want to disable recovery and is changed when a device is added to the array as this is used as a trigger to 'try recovery again'. This will allow RAID10 to get the control that it needs. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Remove deadlock potential in md_open A recent commit: commit 449aad3e25358812c43afc60918c5ad3819488e7 introduced the possibility of an A-B/B-A deadlock between bd_mutex and reconfig_mutex. __blkdev_get holds bd_mutex while calling md_open which takes reconfig_mutex, do_md_run is always called with reconfig_mutex held, and it now takes bd_mutex in the call the revalidate_disk. This potential deadlock was not caught by lockdep due to the use of mutex_lock_interruptible_nexted which was introduced by commit d63a5a74dee87883fda6b7d170244acaac5b05e8 do avoid a warning of an impossible deadlock. It is quite possible to split reconfig_mutex in to two locks. One protects the array data structures while it is being reconfigured, the other ensures that an array is never even partially open while it is being deactivated. In particular, the second lock prevents an open from completing between the time when do_md_stop checks if there are any active opens, and the time when the array is either set read-only, or when ->pers is set to NULL. So we can be certain that no IO is in flight as the array is being destroyed. So create a new lock, open_mutex, just to ensure exclusion between 'open' and 'stop'. This avoids the deadlock and also avoids the lockdep warning mentioned in commit d63a5a74d Reported-by: "Mike Snitzer" <snitzer@gmail.com> Reported-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-08-10 12:50:52 +10:00
[PATCH] md: Convert reconfig_sem to reconfig_mutex ... being careful that mutex_trylock is inverted wrt down_trylock Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 01:18:20 -08:00
md: only count actual openers as access which prevent a 'stop' Open isn't the only thing that increments ->active. e.g. reading /proc/mdstat will increment it briefly. So to avoid false positives in testing for concurrent access, introduce a new counter that counts just the number of times the md device it open. Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21 17:05:25 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Fix - again - partition detection when array becomes active Revert b821eaa572fd737faaf6928ba046e571526c36c6 and f3b99be19ded511a1bf05a148276239d9f13eefa When I wrote the first of these I had a wrong idea about the lifetime of 'struct block_device'. It can disappear at any time that the block device is not open if it falls out of the inode cache. So relying on the 'size' recorded with it to detect when the device size has changed and so we need to revalidate, is wrong. Rather, we really do need the 'changed' attribute stored directly in the mddev and set/tested as appropriate. Without this patch, a sequence of: mknod / open / close / unlink (which can cause a block_device to be created and then destroyed) will result in a rescan of the partition table and consequence removal and addition of partitions. Several of these in a row can get udev racing to create and unlink and other code can get confused. With the patch, the rescan is only performed when needed and so there are no races. This is suitable for any stable kernel from 2.6.35. Reported-by: "Wojcik, Krzysztof" <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
2011-02-24 17:26:41 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Allow setting start point for requested check/repair This makes it possible to just resync a small part of an array. e.g. if a drive reports that it has questionable sectors, a 'repair' of just the region covering those sectors will cause them to be read and, if there is an error, re-written with correct data. Signed-off-by: Neil Brown <neilb@suse.de>
2008-06-28 08:31:24 +10:00
md: allow a maximum extent to be set for resyncing This allows userspace to control resync/reshape progress and synchronise it with other activities, such as shared access in a SAN, or backing up critical sections during a tricky reshape. Writing a number of sectors (which must be a multiple of the chunk size if such is meaningful) causes a resync to pause when it gets to that point. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 01:39:52 -08:00
[PATCH] md: improve locking on 'safemode' and move superblock writes When md marks the superblock dirty before a write, it calls generic_make_request (to write the superblock) from within generic_make_request (to write the first dirty block), which could cause problems later. With this patch, the superblock write is always done by the helper thread, and write request are delayed until that write completes. Also, the locking around marking the array dirty and writing the superblock is improved to avoid possible races. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:12 -07:00
kernfs: s/sysfs_dirent/kernfs_node/ and rename its friends accordingly kernfs has just been separated out from sysfs and we're already in full conflict mode. Nothing can make the situation any worse. Let's take the chance to name things properly. This patch performs the following renames. * s/sysfs_elem_dir/kernfs_elem_dir/ * s/sysfs_elem_symlink/kernfs_elem_symlink/ * s/sysfs_elem_attr/kernfs_elem_file/ * s/sysfs_dirent/kernfs_node/ * s/sd/kn/ in kernfs proper * s/parent_sd/parent/ * s/target_sd/target/ * s/dir_sd/parent/ * s/to_sysfs_dirent()/rb_to_kn()/ * misc renames of local vars when they conflict with the above Because md, mic and gpio dig into sysfs details, this patch ends up modifying them. All are sysfs_dirent renames and trivial. While we can avoid these by introducing a dummy wrapping struct sysfs_dirent around kernfs_node, given the limited usage outside kernfs and sysfs proper, I don't think such workaround is called for. This patch is strictly rename only and doesn't introduce any functional difference. - mic / gpio renames were missing. Spotted by kbuild test robot. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Neil Brown <neilb@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11 14:11:53 -05:00
md: use sysfs_notify_dirent to notify changes to md/array_state Now that we have sysfs_notify_dirent, use it to notify changes to md/array_state. As sysfs_notify_dirent can be called in atomic context, we can remove the delayed notify and the MD_NOTIFY_ARRAY_STATE flag. Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-21 13:25:21 +11:00
kernfs: s/sysfs_dirent/kernfs_node/ and rename its friends accordingly kernfs has just been separated out from sysfs and we're already in full conflict mode. Nothing can make the situation any worse. Let's take the chance to name things properly. This patch performs the following renames. * s/sysfs_elem_dir/kernfs_elem_dir/ * s/sysfs_elem_symlink/kernfs_elem_symlink/ * s/sysfs_elem_attr/kernfs_elem_file/ * s/sysfs_dirent/kernfs_node/ * s/sd/kn/ in kernfs proper * s/parent_sd/parent/ * s/target_sd/target/ * s/dir_sd/parent/ * s/to_sysfs_dirent()/rb_to_kn()/ * misc renames of local vars when they conflict with the above Because md, mic and gpio dig into sysfs details, this patch ends up modifying them. All are sysfs_dirent renames and trivial. While we can avoid these by introducing a dummy wrapping struct sysfs_dirent around kernfs_node, given the limited usage outside kernfs and sysfs proper, I don't think such workaround is called for. This patch is strictly rename only and doesn't introduce any functional difference. - mic / gpio renames were missing. Spotted by kbuild test robot. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Neil Brown <neilb@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11 14:11:53 -05:00
md: use sysfs_notify_dirent to notify changes to md/array_state Now that we have sysfs_notify_dirent, use it to notify changes to md/array_state. As sysfs_notify_dirent can be called in atomic context, we can remove the delayed notify and the MD_NOTIFY_ARRAY_STATE flag. Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-21 13:25:21 +11:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
md: rename mddev->write_lock to mddev->lock This lock is used for (slightly) more than helping with writing superblocks, and it will soon be extended further. So the name is inappropriate. Also, the _irq variant hasn't been needed since 2.6.37 as it is never taking from interrupt or bh context. So: -rename write_lock to lock -document what it protects -remove _irq ... except in md_flush_request() as there is no wait_event_lock() (with no _irq). This can be cleaned up after appropriate changes to wait.h. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 12:56:56 +11:00
md: protect ->pers changes with mddev->lock ->pers is already protected by ->reconfig_mutex, and cannot possibly change when there are threads running or outstanding IO. However there are some places where we access ->pers not in a thread or IO context, and where ->reconfig_mutex is unnecessarily heavy-weight: level_show and md_seq_show(). So protect all changes, and those accesses, with ->lock. This is a step toward taking those accesses out from under reconfig_mutex. [Fixed missing "mddev->pers" -> "pers" conversion, thanks to Dan Carpenter <dan.carpenter@oracle.com>] Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 12:56:58 +11:00
md/bitmap: protect clearing of ->bitmap by mddev->lock This makes it safe to inspect the struct while holding only the spinlock. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 12:56:58 +11:00
md: move GET_BITMAP_FILE ioctl out from mddev_lock. It makes more sense to report bitmap_info->file, rather than bitmap->file (the later is only available once the array is active). With that change, use mddev->lock to protect bitmap_info being set to NULL, and we can call get_bitmap_file() without taking the mutex. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 12:57:00 +11:00
md: use mddev->lock to protect updates to resync_{min,max}. There are interdependencies between these two sysfs attributes and whether a resync is currently running. Rather than depending on reconfig_mutex to ensure no races when testing these interdependencies are met, use the spinlock. This will allow the mutex to be remove from protecting this code in a subsequent patch. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 12:57:01 +11:00
md: rename mddev->write_lock to mddev->lock This lock is used for (slightly) more than helping with writing superblocks, and it will soon be extended further. So the name is inappropriate. Also, the _irq variant hasn't been needed since 2.6.37 as it is never taking from interrupt or bh context. So: -rename write_lock to lock -document what it protects -remove _irq ... except in md_flush_request() as there is no wait_event_lock() (with no _irq). This can be cleaned up after appropriate changes to wait.h. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 12:56:56 +11:00
[PATCH] md: fix deadlock due to md thread processing delayed requests. Before completing a 'write' the md superblock might need to be updated. This is best done by the md_thread. The current code schedules this up and queues the write request for later handling by the md_thread. However some personalities (Raid5/raid6) will deadlock if the md_thread tries to submit requests to its own array. So this patch changes things so the processes submitting the request waits for the superblock to be written and then submits the request itself. This fixes a recently-created deadlock in raid5/raid6 Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:26 -07:00
[PATCH] md: allow md to update multiple superblocks in parallel. currently, md updates all superblocks (one on each device) in series. It waits for one write to complete before starting the next. This isn't a big problem as superblock updates don't happen that often. However it is neater to do it in parallel, and if the drives in the array have gone to "sleep" after a period of idleness, then waking them is parallel is faster (and someone else should be worrying about power drain). Futher, we will need parallel superblock updates for a future patch which keeps the intent-logging bitmap near the superblock. Also remove the silly code that retired superblock updates 100 times. This simply never made sense. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:28 -07:00
[PATCH] md: improve locking on 'safemode' and move superblock writes When md marks the superblock dirty before a write, it calls generic_make_request (to write the superblock) from within generic_make_request (to write the first dirty block), which could cause problems later. With this patch, the superblock write is always done by the helper thread, and write request are delayed until that write completes. Also, the locking around marking the array dirty and writing the superblock is improved to avoid possible races. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:12 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
MD: use per-cpu counter for writes_pending The 'writes_pending' counter is used to determine when the array is stable so that it can be marked in the superblock as "Clean". Consequently it needs to be updated frequently but only checked for zero occasionally. Recent changes to raid5 cause the count to be updated even more often - once per 4K rather than once per bio. This provided justification for making the updates more efficient. So we replace the atomic counter a percpu-refcount. This can be incremented and decremented cheaply most of the time, and can be switched to "atomic" mode when more precise counting is needed. As it is possible for multiple threads to want a precise count, we introduce a "sync_checker" counter to count the number of threads in "set_in_sync()", and only switch the refcount back to percpu mode when that is zero. We need to be careful about races between set_in_sync() setting ->in_sync to 1, and md_write_start() setting it to zero. md_write_start() holds the rcu_read_lock() while checking if the refcount is in percpu mode. If it is, then we know a switch to 'atomic' will not happen until after we call rcu_read_unlock(), in which case set_in_sync() will see the elevated count, and not set in_sync to 1. If it is not in percpu mode, we take the mddev->lock to ensure proper synchronization. It is no longer possible to quickly check if the count is zero, which we previously did to update a timer or to schedule the md_thread. So now we do these every time we decrement that counter, but make sure they are fast. mod_timer() already optimizes the case where the timeout value doesn't actually change. We leverage that further by always rounding off the jiffies to the timeout value. This may delay the marking of 'clean' slightly, but ensure we only perform atomic operation here when absolutely needed. md_wakeup_thread() current always calls wake_up(), even if THREAD_WAKEUP is already set. That too can be optimised to avoid calls to wake_up(). Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-15 14:05:14 +11:00
[BLOCK] Get rid of request_queue_t typedef Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24 09:28:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
md: collect bitmap-specific fields into one structure. In preparation for making bitmap fields configurable via sysfs, start tidying up by making a single structure to contain the configuration fields. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:52 +11:00
md: support bitmap offset appropriate for external-metadata arrays. For md arrays were metadata is managed externally, the kernel does not know about a superblock so the superblock offset is 0. If we want to have a write-intent-bitmap near the end of the devices of such an array, we should support sector_t sized offset. We need offset be possibly negative for when the bitmap is before the metadata, so use loff_t instead. Also add sanity check that bitmap does not overlap with data. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:54 +11:00
md: collect bitmap-specific fields into one structure. In preparation for making bitmap fields configurable via sysfs, start tidying up by making a single structure to contain the configuration fields. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:52 +11:00
md: support bitmap offset appropriate for external-metadata arrays. For md arrays were metadata is managed externally, the kernel does not know about a superblock so the superblock offset is 0. If we want to have a write-intent-bitmap near the end of the devices of such an array, we should support sector_t sized offset. We need offset be possibly negative for when the bitmap is before the metadata, so use loff_t instead. Also add sanity check that bitmap does not overlap with data. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:54 +11:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
md: collect bitmap-specific fields into one structure. In preparation for making bitmap fields configurable via sysfs, start tidying up by making a single structure to contain the configuration fields. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:52 +11:00
md/bitmap: add new 'space' attribute for bitmaps. If we are to allow bitmaps to be resized when the array is resized, we need to know how much space there is. So create an attribute to store this information and set appropriate defaults. It can be set more precisely via sysfs, or future metadata extensions may allow it to be recorded. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:07 +10:00
md: support bitmap offset appropriate for external-metadata arrays. For md arrays were metadata is managed externally, the kernel does not know about a superblock so the superblock offset is 0. If we want to have a write-intent-bitmap near the end of the devices of such an array, we should support sector_t sized offset. We need offset be possibly negative for when the bitmap is before the metadata, so use loff_t instead. Also add sanity check that bitmap does not overlap with data. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:54 +11:00
md: collect bitmap-specific fields into one structure. In preparation for making bitmap fields configurable via sysfs, start tidying up by making a single structure to contain the configuration fields. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:52 +11:00
md/bitmap: add new 'space' attribute for bitmaps. If we are to allow bitmaps to be resized when the array is resized, we need to know how much space there is. So create an attribute to store this information and set appropriate defaults. It can be set more precisely via sysfs, or future metadata extensions may allow it to be recorded. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:07 +10:00
md: collect bitmap-specific fields into one structure. In preparation for making bitmap fields configurable via sysfs, start tidying up by making a single structure to contain the configuration fields. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:52 +11:00
md: move offset, daemon_sleep and chunksize out of bitmap structure ... and into bitmap_info. These are all configuration parameters that need to be set before the bitmap is created. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:53 +11:00
md/bitmap: white space clean up and similar. Fixes some whitespace problems Fixed some checkpatch.pl complaints. Replaced kmalloc ... memset(0), with kzalloc Fixed an unlikely memory leak on an error path. Reformatted a number of 'if/else' sets, sometimes replacing goto with an else clause. Removed some old comments and commented-out code. Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-01 19:37:31 +10:00
md: move offset, daemon_sleep and chunksize out of bitmap structure ... and into bitmap_info. These are all configuration parameters that need to be set before the bitmap is created. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:53 +11:00
md: Support write-intent bitmaps with externally managed metadata. In this case, the metadata needs to not be in the same sector as the bitmap. md will not read/write any bitmap metadata. Config must be done via sysfs and when a recovery makes the array non-degraded again, writing 'true' to 'bitmap/can_clear' will allow bits in the bitmap to be cleared again. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:56 +11:00
Introduce md_cluster_info md_cluster_info stores the cluster information in the MD device. The join() is called when mddev detects it is a clustered device. The main responsibilities are: 1. Setup a DLM lockspace 2. Setup all initial locks such as super block locks and bitmap lock (will come later) The leave() clears up the lockspace and all the locks held. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-29 10:20:02 -05:00
Add node recovery callbacks DLM offers callbacks when a node fails and the lock remastery is performed: 1. recover_prep: called when DLM discovers a node is down 2. recover_slot: called when DLM identifies the node and recovery can start 3. recover_done: called when all nodes have completed recover_slot recover_slot() and recover_done() are also called when the node joins initially in order to inform the node with its slot number. These slot numbers start from one, so we deduct one to make it start with zero which the cluster-md code uses. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-30 00:42:49 -05:00
md: collect bitmap-specific fields into one structure. In preparation for making bitmap fields configurable via sysfs, start tidying up by making a single structure to contain the configuration fields. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:52 +11:00
[PATCH] md: optimised resync using Bitmap based intent logging With this patch, the intent to write to some block in the array can be logged to a bitmap file. Each bit represents some number of sectors and is set before any update happens, and only cleared when all writes relating to all sectors are complete. After an unclean shutdown, information in this bitmap can be used to optimise resync - only sectors which could be out-of-sync need to be updated. Also if a drive is removed and then added back into an array, the recovery can make use of the bitmap to optimise reconstruction. This is not implemented in this patch. Currently the bitmap is stored in a file which must (obviously) be stored on a separate device. The patch only provided infrastructure. It does not update any personalities to bitmap intent logging. Md arrays can still be used with no bitmap file. This patch has minimal impact on such arrays. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:14 -07:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: support barrier requests on all personalities. Previously barriers were only supported on RAID1. This is because other levels requires synchronisation across all devices and so needed a different approach. Here is that approach. When a barrier arrives, we send a zero-length barrier to every active device. When that completes - and if the original request was not empty - we submit the barrier request itself (with the barrier flag cleared) and then submit a fresh load of zero length barriers. The barrier request itself is asynchronous, but any subsequent request will block until the barrier completes. The reason for clearing the barrier flag is that a barrier request is allowed to fail. If we pass a non-empty barrier through a striping raid level it is conceivable that part of it could succeed and part could fail. That would be way too hard to deal with. So if the first run of zero length barriers succeed, we assume all is sufficiently well that we send the request and ignore errors in the second run of barriers. RAID5 needs extra care as write requests may not have been submitted to the underlying devices yet. So we flush the stripe cache before proceeding with the barrier. Note that the second set of zero-length barriers are submitted immediately after the original request is submitted. Thus when a personality finds mddev->barrier to be set during make_request, it should not return from make_request until the corresponding per-device request(s) have been queued. That will be done in later patches. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Andre Noll <maan@systemlinux.org>
2009-12-14 12:49:49 +11:00
md: manage redundancy group in sysfs when changing level. Some levels expect the 'redundancy group' to be present, others don't. So when we change level of an array we might need to add or remove this group. This requires fixing up the current practice of overloading ->private to indicate (when ->pers == NULL) that something needs to be removed. So create a new ->to_remove to fill that role. When changing levels, we may need to add or remove attributes. When changing RAID5 -> RAID6, we both add and remove the same thing. It is important to catch this and optimise it out as the removal is delayed until a lock is released, so trying to add immediately would cause problems. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2010-04-14 17:15:37 +10:00
md/plug: optionally use plugger to unplug an array during resync/recovery. If an array doesn't have a 'queue' then md_do_sync cannot unplug it. In that case it will have a 'plugger', so make that available to the mddev, and use it to unplug the array if needed. Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-01 19:37:29 +10:00
md: use separate bio pool for each md device. bio_clone and bio_alloc allocate from a common bio pool. If an md device is stacked with other devices that use this pool, or under something like swap which uses the pool, then the multiple calls on the pool can cause deadlocks. So allocate a local bio pool for each md array and use that rather than the common pool. This pool is used both for regular IO and metadata updates. Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-26 18:31:13 +11:00
md: use a separate bio_set for synchronous IO. md devices allocate a bio_set and use it for two distinct purposes. mddev->bio_set is used to clone bios as part of sending upper level requests down to lower level devices, and it is also use for synchronous IO such as superblock and bitmap updates, and for correcting read errors. This multiple usage can lead to deadlocks. It is likely that cloned bios might be queued for write and to be waiting for a metadata update before the write can be permitted. If the cloning exhausted mddev->bio_set, the metadata update may not be able to proceed. This scenario has been seen during heavy testing, with lots of IO and lots of memory pressure. Address this by adding a new bio_set specifically for synchronous IO. All synchronous IO goes directly to the underlying device and is not queued at the md level, so request using entries from the new mddev->sync_set will complete in a timely fashion. Requests that use mddev->bio_set will sometimes need to wait for synchronous IO, but will no longer risk deadlocking that iO. Also: small simplification in mddev_put(): there is no need to wait until the spinlock is released before calling bioset_free(). Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-21 09:12:21 +10:00
md: use separate bio pool for each md device. bio_clone and bio_alloc allocate from a common bio pool. If an md device is stacked with other devices that use this pool, or under something like swap which uses the pool, then the multiple calls on the pool can cause deadlocks. So allocate a local bio pool for each md array and use that rather than the common pool. This pool is used both for regular IO and metadata updates. Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-26 18:31:13 +11:00
md: implment REQ_FLUSH/FUA support This patch converts md to support REQ_FLUSH/FUA instead of now deprecated REQ_HARDBARRIER. In the core part (md.c), the following changes are notable. * Unlike REQ_HARDBARRIER, REQ_FLUSH/FUA don't interfere with processing of other requests and thus there is no reason to mark the queue congested while FLUSH/FUA is in progress. * REQ_FLUSH/FUA failures are final and its users don't need retry logic. Retry logic is removed. * Preflush needs to be issued to all member devices but FUA writes can be handled the same way as other writes - their processing can be deferred to request_queue of member devices. md_barrier_request() is renamed to md_flush_request() and simplified accordingly. For linear, raid0 and multipath, the core changes are enough. raid1, 5 and 10 need the following conversions. * raid1: Handling of FLUSH/FUA bio's can simply be deferred to request_queues of member devices. Barrier related logic removed. * raid5: Queue draining logic dropped. FUA bit is propagated through biodrain and stripe resconstruction such that all the updated parts of the stripe are written out with FUA writes if any of the dirtying writes was FUA. preread_active_stripes handling in make_request() is updated as suggested by Neil Brown. * raid10: FUA bit needs to be propagated to write clones. linear, raid0, 1, 5 and 10 tested. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-03 11:56:18 +02:00
block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:25 -05:00
md: support barrier requests on all personalities. Previously barriers were only supported on RAID1. This is because other levels requires synchronisation across all devices and so needed a different approach. Here is that approach. When a barrier arrives, we send a zero-length barrier to every active device. When that completes - and if the original request was not empty - we submit the barrier request itself (with the barrier flag cleared) and then submit a fresh load of zero length barriers. The barrier request itself is asynchronous, but any subsequent request will block until the barrier completes. The reason for clearing the barrier flag is that a barrier request is allowed to fail. If we pass a non-empty barrier through a striping raid level it is conceivable that part of it could succeed and part could fail. That would be way too hard to deal with. So if the first run of zero length barriers succeed, we assume all is sufficiently well that we send the request and ignore errors in the second run of barriers. RAID5 needs extra care as write requests may not have been submitted to the underlying devices yet. So we flush the stripe cache before proceeding with the barrier. Note that the second set of zero-length barriers are submitted immediately after the original request is submitted. Thus when a personality finds mddev->barrier to be set during make_request, it should not return from make_request until the corresponding per-device request(s) have been queued. That will be done in later patches. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Andre Noll <maan@systemlinux.org>
2009-12-14 12:49:49 +11:00
md: implment REQ_FLUSH/FUA support This patch converts md to support REQ_FLUSH/FUA instead of now deprecated REQ_HARDBARRIER. In the core part (md.c), the following changes are notable. * Unlike REQ_HARDBARRIER, REQ_FLUSH/FUA don't interfere with processing of other requests and thus there is no reason to mark the queue congested while FLUSH/FUA is in progress. * REQ_FLUSH/FUA failures are final and its users don't need retry logic. Retry logic is removed. * Preflush needs to be issued to all member devices but FUA writes can be handled the same way as other writes - their processing can be deferred to request_queue of member devices. md_barrier_request() is renamed to md_flush_request() and simplified accordingly. For linear, raid0 and multipath, the core changes are enough. raid1, 5 and 10 need the following conversions. * raid1: Handling of FLUSH/FUA bio's can simply be deferred to request_queues of member devices. Barrier related logic removed. * raid5: Queue draining logic dropped. FUA bit is propagated through biodrain and stripe resconstruction such that all the updated parts of the stripe are written out with FUA writes if any of the dirtying writes was FUA. preread_active_stripes handling in make_request() is updated as suggested by Neil Brown. * raid10: FUA bit needs to be propagated to write clones. linear, raid0, 1, 5 and 10 tested. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-03 11:56:18 +02:00
md: support barrier requests on all personalities. Previously barriers were only supported on RAID1. This is because other levels requires synchronisation across all devices and so needed a different approach. Here is that approach. When a barrier arrives, we send a zero-length barrier to every active device. When that completes - and if the original request was not empty - we submit the barrier request itself (with the barrier flag cleared) and then submit a fresh load of zero length barriers. The barrier request itself is asynchronous, but any subsequent request will block until the barrier completes. The reason for clearing the barrier flag is that a barrier request is allowed to fail. If we pass a non-empty barrier through a striping raid level it is conceivable that part of it could succeed and part could fail. That would be way too hard to deal with. So if the first run of zero length barriers succeed, we assume all is sufficiently well that we send the request and ignore errors in the second run of barriers. RAID5 needs extra care as write requests may not have been submitted to the underlying devices yet. So we flush the stripe cache before proceeding with the barrier. Note that the second set of zero-length barriers are submitted immediately after the original request is submitted. Thus when a personality finds mddev->barrier to be set during make_request, it should not return from make_request until the corresponding per-device request(s) have been queued. That will be done in later patches. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Andre Noll <maan@systemlinux.org>
2009-12-14 12:49:49 +11:00
md: implment REQ_FLUSH/FUA support This patch converts md to support REQ_FLUSH/FUA instead of now deprecated REQ_HARDBARRIER. In the core part (md.c), the following changes are notable. * Unlike REQ_HARDBARRIER, REQ_FLUSH/FUA don't interfere with processing of other requests and thus there is no reason to mark the queue congested while FLUSH/FUA is in progress. * REQ_FLUSH/FUA failures are final and its users don't need retry logic. Retry logic is removed. * Preflush needs to be issued to all member devices but FUA writes can be handled the same way as other writes - their processing can be deferred to request_queue of member devices. md_barrier_request() is renamed to md_flush_request() and simplified accordingly. For linear, raid0 and multipath, the core changes are enough. raid1, 5 and 10 need the following conversions. * raid1: Handling of FLUSH/FUA bio's can simply be deferred to request_queues of member devices. Barrier related logic removed. * raid5: Queue draining logic dropped. FUA bit is propagated through biodrain and stripe resconstruction such that all the updated parts of the stripe are written out with FUA writes if any of the dirtying writes was FUA. preread_active_stripes handling in make_request() is updated as suggested by Neil Brown. * raid10: FUA bit needs to be propagated to write clones. linear, raid0, 1, 5 and 10 tested. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-03 11:56:18 +02:00
md: add support for raising dm events. dm uses scheduled work to raise events to user-space. So allow md device to have work_structs and schedule them on an error. Signed-off-by: NeilBrown <neilb@suse.de>
2010-07-26 11:49:55 +10:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
Introduce md_cluster_info md_cluster_info stores the cluster information in the MD device. The join() is called when mddev detects it is a clustered device. The main responsibilities are: 1. Setup a DLM lockspace 2. Setup all initial locks such as super block locks and bitmap lock (will come later) The leave() clears up the lockspace and all the locks held. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-29 10:20:02 -05:00
md-cluster: Defer MD reloading to mddev->thread Reloading of superblock must be performed under reconfig_mutex. However, this cannot be done with md_reload_sb because it would deadlock with the message DLM lock. So, we defer it in md_check_recovery() which is executed by mddev->thread. This introduces a new flag, MD_RELOAD_SB, which if set, will reload the superblock. And good_device_nr is also added to 'struct mddev' which is used to get the num of the good device within cluster raid. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-12-21 10:51:00 +11:00
md: define mddev flags, recovery flags and r1bio state bits using enums This is less error prone than using individual #defines. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-09 10:21:33 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: move mddev_lock and related to md.h The one which is not inline (mddev_unlock) gets EXPORTed. This makes the locking available to personality modules so that it doesn't have to be imposed upon them. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 12:57:01 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
md: rename "mdk_personality" to "md_personality" "mdk" doesn't mean anything any more. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:58 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: remove personality numbering from md md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:36 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: fix deadlock between mddev_suspend() and md_write_start() If mddev_suspend() races with md_write_start() we can deadlock with mddev_suspend() waiting for the request that is currently in md_write_start() to complete the ->make_request() call, and md_write_start() waiting for the metadata to be updated to mark the array as 'dirty'. As metadata updates done by md_check_recovery() only happen then the mddev_lock() can be claimed, and as mddev_suspend() is often called with the lock held, these threads wait indefinitely for each other. We fix this by having md_write_start() abort if mddev_suspend() is happening, and ->make_request() aborts if md_write_start() aborted. md_make_request() can detect this abort, decrease the ->active_io count, and wait for mddev_suspend(). Reported-by: Nix <nix@esperi.org.uk> Fix: 68866e425be2(MD: no sync IO while suspended) Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-05 16:49:39 +10:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: rename ->stop to ->free Now that the ->stop function only frees the private data, rename is accordingly. Also pass in the private pointer as an arg rather than using mddev->private. This flexibility will be useful in level_store(). Finally, don't clear ->private. It doesn't make sense to clear it seeing that isn't what we free, and it is no longer necessary to clear ->private (it was some time ago before ->to_remove was introduced). Setting ->to_remove in ->free() is a bit of a wart, but not a big problem at the moment. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 12:56:58 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: change hot_remove_disk to take an rdev rather than a number. Soon an array will be able to have multiple devices with the same raid_disk number (an original and a replacement). So removing a device based on the number won't work. So pass the actual device handle instead. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:51 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: remove 'go_faster' option from ->sync_request() This option is not well justified and testing suggests that it hardly ever makes any difference. The comment suggests there might be a need to wait for non-resync activity indicated by ->nr_waiting, however raise_barrier() already waits for all of that. So just remove it to simplify reasoning about speed limiting. This allows us to remove a 'FIXME' comment from raid5.c as that never used the flag. Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-19 16:04:40 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
[PATCH] md: all hot-add and hot-remove of md intent logging bitmaps Both file-bitmaps and superblock bitmaps are supported. If you add a bitmap file on the array device, you lose. This introduces a 'default_bitmap_offset' field in mddev, as the ioctl used for adding a superblock bitmap doesn't have room for giving an offset. Later, this value will be setable via sysfs. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 16:23:45 -07:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: add ->takeover method to support changing the personality managing an array Implement this for RAID6 to be able to 'takeover' a RAID5 array. The new RAID6 will use a layout which places Q on the last device, and that device will be missing. If there are any available spares, one will immediately have Q recovered onto it. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:39:39 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: make ->congested robust against personality changes. There is currently no locking around calls to the 'congested' bdi function. If called at an awkward time while an array is being converted from one level (or personality) to another, there is a tiny chance of running code in an unreferenced module etc. So add a 'congested' function to the md_personality operations structure, and call it with appropriate locking from a central 'mddev_congested'. When the array personality is changing the array will be 'suspended' so no IO is processed. If mddev_congested detects this, it simply reports that the array is congested, which is a safe guess. As mddev_suspend calls synchronize_rcu(), mddev_congested can avoid races by included the whole call inside an rcu_read_lock() region. This require that the congested functions for all subordinate devices can be run under rcu_lock. Fortunately this is the case. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 12:56:56 +11:00
raid5-ppl: runtime PPL enabling or disabling Allow writing to 'consistency_policy' attribute when the array is active. Add a new function 'change_consistency_policy' to the md_personality operations structure to handle the change in the personality code. Values "ppl" and "resync" are accepted and turn PPL on and off respectively. When enabling PPL its location and size should first be set using 'ppl_sector' and 'ppl_size' attributes and a valid PPL header should be written at this location on each member device. Enabling or disabling PPL is performed under a suspended array. The raid5_reset_stripe_cache function frees the stripe cache and allocates it again in order to allocate or free the ppl_pages for the stripes in the stripe cache. Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09 10:00:03 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: change raid5 sysfs attribute to not create a new directory There isn't really a need for raid5 attributes to be an a subdirectory, so this patch moves them from /sys/block/mdX/md/raid5/attribute to /sys/block/mdX/md/attribute This suggests that all md personalities should co-operate about namespace usage, but that shouldn't be a problem. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:30 -08:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
[PATCH] md: change raid5 sysfs attribute to not create a new directory There isn't really a need for raid5 attributes to be an a subdirectory, so this patch moves them from /sys/block/mdX/md/raid5/attribute to /sys/block/mdX/md/attribute This suggests that all md personalities should co-operate about namespace usage, but that shouldn't be a problem. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:30 -08:00
md: support updating bitmap parameters via sysfs. A new attribute directory 'bitmap' in 'md' is created which contains files for configuring the bitmap. 'location' identifies where the bitmap is, either 'none', or 'file' or 'sector offset from metadata'. Writing 'location' can create or remove a bitmap. Adding a 'file' bitmap this way is not yet supported. 'chunksize' and 'time_base' must be set before 'location' can be set. 'chunksize' can be set before creating a bitmap, but is currently always over-ridden by the bitmap superblock. 'time_base' and 'backlog' can be updated at any time. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Andre Noll <maan@systemlinux.org>
2009-12-14 12:49:55 +11:00
[PATCH] md: change raid5 sysfs attribute to not create a new directory There isn't really a need for raid5 attributes to be an a subdirectory, so this patch moves them from /sys/block/mdX/md/raid5/attribute to /sys/block/mdX/md/attribute This suggests that all md personalities should co-operate about namespace usage, but that shouldn't be a problem. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:30 -08:00
kernfs: s/sysfs_dirent/kernfs_node/ and rename its friends accordingly kernfs has just been separated out from sysfs and we're already in full conflict mode. Nothing can make the situation any worse. Let's take the chance to name things properly. This patch performs the following renames. * s/sysfs_elem_dir/kernfs_elem_dir/ * s/sysfs_elem_symlink/kernfs_elem_symlink/ * s/sysfs_elem_attr/kernfs_elem_file/ * s/sysfs_dirent/kernfs_node/ * s/sd/kn/ in kernfs proper * s/parent_sd/parent/ * s/target_sd/target/ * s/dir_sd/parent/ * s/to_sysfs_dirent()/rb_to_kn()/ * misc renames of local vars when they conflict with the above Because md, mic and gpio dig into sysfs details, this patch ends up modifying them. All are sysfs_dirent renames and trivial. While we can avoid these by introducing a dummy wrapping struct sysfs_dirent around kernfs_node, given the limited usage outside kernfs and sysfs proper, I don't think such workaround is called for. This patch is strictly rename only and doesn't introduce any functional difference. - mic / gpio renames were missing. Spotted by kbuild test robot. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Neil Brown <neilb@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11 14:11:53 -05:00
md: reduce dependence on sysfs. We will want md devices to live as dm targets where sysfs is not visible. So allow md to not connect to sysfs. Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-01 19:37:23 +10:00
sysfs: clean up sysfs_get_dirent() The pre-existing sysfs interfaces which take explicit namespace argument are weird in that they place the optional @ns in front of @name which is contrary to the established convention. For example, we end up forcing vast majority of sysfs_get_dirent() users to do sysfs_get_dirent(parent, NULL, name), which is silly and error-prone especially as @ns and @name may be interchanged without causing compilation warning. This renames sysfs_get_dirent() to sysfs_get_dirent_ns() and swap the positions of @name and @ns, and sysfs_get_dirent() is now a wrapper around sysfs_get_dirent_ns(). This makes confusions a lot less likely. There are other interfaces which take @ns before @name. They'll be updated by following patches. This patch doesn't introduce any functional changes. v2: EXPORT_SYMBOL_GPL() wasn't updated leading to undefined symbol error on module builds. Reported by build test robot. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-11 23:19:13 -04:00
md: reduce dependence on sysfs. We will want md devices to live as dm targets where sysfs is not visible. So allow md to not connect to sysfs. Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-01 19:37:23 +10:00
kernfs: s/sysfs_dirent/kernfs_node/ and rename its friends accordingly kernfs has just been separated out from sysfs and we're already in full conflict mode. Nothing can make the situation any worse. Let's take the chance to name things properly. This patch performs the following renames. * s/sysfs_elem_dir/kernfs_elem_dir/ * s/sysfs_elem_symlink/kernfs_elem_symlink/ * s/sysfs_elem_attr/kernfs_elem_file/ * s/sysfs_dirent/kernfs_node/ * s/sd/kn/ in kernfs proper * s/parent_sd/parent/ * s/target_sd/target/ * s/dir_sd/parent/ * s/to_sysfs_dirent()/rb_to_kn()/ * misc renames of local vars when they conflict with the above Because md, mic and gpio dig into sysfs details, this patch ends up modifying them. All are sysfs_dirent renames and trivial. While we can avoid these by introducing a dummy wrapping struct sysfs_dirent around kernfs_node, given the limited usage outside kernfs and sysfs proper, I don't think such workaround is called for. This patch is strictly rename only and doesn't introduce any functional difference. - mic / gpio renames were missing. Spotted by kbuild test robot. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Neil Brown <neilb@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11 14:11:53 -05:00
md: reduce dependence on sysfs. We will want md devices to live as dm targets where sysfs is not visible. So allow md to not connect to sysfs. Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-01 19:37:23 +10:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: introduce link/unlink_rdev() helpers There are places where sysfs links to rdev are handled in a same way. Add the helper functions to consolidate them. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
MD: change journal disk role to disk 0 Neil pointed out setting journal disk role to raid_disks will confuse reshape if we support reshape eventually. Switching the role to 0 (we should be fine as long as the value >=0) and skip sysfs file creation to avoid error. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-12-18 15:19:16 +11:00
md: create externally visible flags for supporting hot-replace. hot-replace is a feature being added to md which will allow a device to be replaced without removing it from the array first. With hot-replace a spare can be activated and recovery can start while the original device is still in place, thus allowing a transition from an unreliable device to a reliable device without leaving the array degraded during the transition. It can also be use when the original device is still reliable but it not wanted for some reason. This will eventually be supported in RAID4/5/6 and RAID10. This patch adds a super-block flag to distinguish the replacement device. If an old kernel sees this flag it will reject the device. It also adds two per-device flags which are viewable and settable via sysfs. "want_replacement" can be set to request that a device be replaced. "replacement" is set to show that this device is replacing another device. The "rd%d" links in /sys/block/mdXx/md only apply to the original device, not the replacement. We currently don't make links for the replacement - there doesn't seem to be a need. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:51 +11:00
md: introduce link/unlink_rdev() helpers There are places where sysfs links to rdev are handled in a same way. Add the helper functions to consolidate them. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: introduce link/unlink_rdev() helpers There are places where sysfs links to rdev are handled in a same way. Add the helper functions to consolidate them. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
MD: change journal disk role to disk 0 Neil pointed out setting journal disk role to raid_disks will confuse reshape if we support reshape eventually. Switching the role to 0 (we should be fine as long as the value >=0) and skip sysfs file creation to avoid error. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-12-18 15:19:16 +11:00
md: create externally visible flags for supporting hot-replace. hot-replace is a feature being added to md which will allow a device to be replaced without removing it from the array first. With hot-replace a spare can be activated and recovery can start while the original device is still in place, thus allowing a transition from an unreliable device to a reliable device without leaving the array degraded during the transition. It can also be use when the original device is still reliable but it not wanted for some reason. This will eventually be supported in RAID4/5/6 and RAID10. This patch adds a super-block flag to distinguish the replacement device. If an old kernel sees this flag it will reject the device. It also adds two per-device flags which are viewable and settable via sysfs. "want_replacement" can be set to request that a device be replaced. "replacement" is set to show that this device is replacing another device. The "rd%d" links in /sys/block/mdXx/md only apply to the original device, not the replacement. We currently don't make links for the replacement - there doesn't seem to be a need. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:51 +11:00
md: introduce link/unlink_rdev() helpers There are places where sysfs links to rdev are handled in a same way. Add the helper functions to consolidate them. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27 11:00:36 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: use list_for_each_entry macro directly The rdev_for_each macro defined in <linux/raid/md_k.h> is identical to list_for_each_entry_safe, from <linux/list.h>, it should be defined to use list_for_each_entry_safe, instead of reinventing the wheel. But some calls to each_entry_safe don't really need a safe version, just a direct list_for_each_entry is enough, this could save a temp variable (tmp) in every function that used rdev_for_each. In this patch, most rdev_for_each loops are replaced by list_for_each_entry, totally save many tmp vars; and only in the other situations that will call list_del to delete an entry, the safe version is used. Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: tidy up rdev_for_each usage. md.h has an 'rdev_for_each()' macro for iterating the rdevs in an mddev. However it uses the 'safe' version of list_for_each_entry, and so requires the extra variable, but doesn't include 'safe' in the name, which is useful documentation. Consequently some places use this safe version without needing it, and many use an explicity list_for_each entry. So: - rename rdev_for_each to rdev_for_each_safe - create a new rdev_for_each which uses the plain list_for_each_entry, - use the 'safe' version only where needed, and convert all other list_for_each_entry calls to use rdev_for_each. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:39 +11:00
md: use list_for_each_entry macro directly The rdev_for_each macro defined in <linux/raid/md_k.h> is identical to list_for_each_entry_safe, from <linux/list.h>, it should be defined to use list_for_each_entry_safe, instead of reinventing the wheel. But some calls to each_entry_safe don't really need a safe version, just a direct list_for_each_entry is enough, this could save a temp variable (tmp) in every function that used rdev_for_each. In this patch, most rdev_for_each loops are replaced by list_for_each_entry, totally save many tmp vars; and only in the other situations that will call list_del to delete an entry, the safe version is used. Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: Protect access to mddev->disks list using RCU All modifications and most access to the mddev->disks list are made under the reconfig_mutex lock. However there are three places where the list is walked without any locking. If a reconfig happens at this time, havoc (and oops) can ensue. So use RCU to protect these accesses: - wrap them in rcu_read_{,un}lock() - use list_for_each_entry_rcu - add to the list with list_add_rcu - delete from the list with list_del_rcu - delay the 'free' with call_rcu rather than schedule_work Note that export_rdev did a list_del_init on this list. In almost all cases the entry was not in the list anymore so it was a no-op and so safe. It is no longer safe as after list_del_rcu we may not touch the list_head. An audit shows that export_rdev is called: - after unbind_rdev_from_array, in which case the delete has already been done, - after bind_rdev_to_array fails, in which case the delete isn't needed. - before the device has been put on a list at all (e.g. in add_new_disk where reading the superblock fails). - and in autorun devices after a failure when the device is on a different list. So remove the list_del_init call from export_rdev, and add it back immediately before the called to export_rdev for that last case. Note also that ->same_set is sometimes used for lists other than mddev->list (e.g. candidates). In these cases rcu is not needed. Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21 17:05:25 +10:00
md: remove typedefs: mdk_thread_t -> struct md_thread Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:23 +11:00
MD: change the parameter of md thread Change the thread parameter, so the thread can carry extra info. Next patch will use it. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:34:00 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: optimised resync using Bitmap based intent logging With this patch, the intent to write to some block in the array can be logged to a bitmap file. Each bit represents some number of sectors and is set before any update happens, and only cleared when all writes relating to all sectors are complete. After an unclean shutdown, information in this bitmap can be used to optimise resync - only sectors which could be out-of-sync need to be updated. Also if a drive is removed and then added back into an array, the recovery can make use of the bitmap to optimise reconstruction. This is not implemented in this patch. Currently the bitmap is stored in a file which must (obviously) be stored on a separate device. The patch only provided infrastructure. It does not update any personalities to bitmap intent logging. Md arrays can still be used with no bitmap file. This patch has minimal impact on such arrays. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 17:17:14 -07:00
MD: change the parameter of md thread Change the thread parameter, so the thread can carry extra info. Next patch will use it. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:34:00 +11:00
md: remove typedefs: mdk_thread_t -> struct md_thread Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:23 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] md: define and use safe_put_page for md md sometimes call put_page on NULL pointers (treating it like kfree). This is not safe, so define and use a 'safe_put_page' which checks for NULL. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 00:20:40 -08:00
md: rename "mdk_personality" to "md_personality" "mdk" doesn't mean anything any more. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:58 +11:00
Introduce md_cluster_operations to handle cluster functions This allows dynamic registering of cluster hooks. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-29 10:01:53 -05:00
md: remove typedefs: mdk_thread_t -> struct md_thread Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:23 +11:00
MD: change the parameter of md thread Change the thread parameter, so the thread can carry extra info. Next patch will use it. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:34:00 +11:00
md: remove typedefs: mdk_thread_t -> struct md_thread Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:23 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
MD: Export 'md_reap_sync_thread' function MD: Export 'md_reap_sync_thread' function Make 'md_reap_sync_thread' available to other files, specifically dm-raid.c. - rename reap_sync_thread to md_reap_sync_thread - move the fn after md_check_recovery to match md.h declaration placement - export md_reap_sync_thread Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24 11:42:43 +10:00
md: initialise ->writes_pending in personality modules. The new per-cpu counter for writes_pending is initialised in md_alloc(), which is not called by dm-raid. So dm-raid fails when md_write_start() is called. Move the initialization to the personality modules that need it. This way it is always initialised when needed, but isn't unnecessarily initialized (requiring memory allocation) when the personality doesn't use writes_pending. Reported-by: Heinz Mauelshagen <heinzm@redhat.com> Fixes: 4ad23a976413 ("MD: use per-cpu counter for writes_pending") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-05 16:05:13 +10:00
md: fix deadlock between mddev_suspend() and md_write_start() If mddev_suspend() races with md_write_start() we can deadlock with mddev_suspend() waiting for the request that is currently in md_write_start() to complete the ->make_request() call, and md_write_start() waiting for the metadata to be updated to mark the array as 'dirty'. As metadata updates done by md_check_recovery() only happen then the mddev_lock() can be claimed, and as mddev_suspend() is often called with the lock held, these threads wait indefinitely for each other. We fix this by having md_write_start() abort if mddev_suspend() is happening, and ->make_request() aborts if md_write_start() aborted. md_make_request() can detect this abort, decrease the ->active_io count, and wait for mddev_suspend(). Reported-by: Nix <nix@esperi.org.uk> Fix: 68866e425be2(MD: no sync IO while suspended) Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-05 16:49:39 +10:00
md/raid5: use md_write_start to count stripes, not bios We use md_write_start() to increase the count of pending writes, and md_write_end() to decrement the count. We currently count bios submitted to md/raid5. Change it count stripe_heads that a WRITE bio has been attached to. So now, raid5_make_request() calls md_write_start() and then md_write_end() to keep the count elevated during the setup of the request. add_stripe_bio() calls md_write_start() for each stripe_head, and the completion routines always call md_write_end(), instead of only calling it when raid5_dec_bi_active_stripes() returns 0. make_discard_request also calls md_write_start/end(). The parallel between md_write_{start,end} and use of bi_phys_segments can be seen in that: Whenever we set bi_phys_segments to 1, we now call md_write_start. Whenever we increment it on non-read requests with raid5_inc_bi_active_stripes(), we now call md_write_start(). Whenever we decrement bi_phys_segments on non-read requsts with raid5_dec_bi_active_stripes(), we now call md_write_end(). This reduces our dependence on keeping a per-bio count of active stripes in bi_phys_segments. md_write_inc() is added which parallels md_write_start(), but requires that a write has already been started, and is certain never to sleep. This can be used inside a spinlocked region when adding to a write request. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-15 14:05:12 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: add possibility to change data-offset for devices. When reshaping we can avoid costly intermediate backup by changing the 'start' address of the array on the device (if there is enough room). So as a first step, allow such a change to be requested through sysfs, and recorded in v1.x metadata. (As we didn't previous check that all 'pad' fields were zero, we need a new FEATURE flag for this. A (belatedly) check that all remaining 'pad' fields are zero to avoid a repeat of this) The new data offset must be requested separately for each device. This allows each to have a different change in the data offset. This is not likely to be used often but as data_offset can be set per-device, new_data_offset should be too. This patch also removes the 'acknowledged' arg to rdev_set_badblocks as it is never used and never will be. At the same time we add a new arg ('in_new') which is currently always zero but will be used more soon. When a reshape finishes we will need to update the data_offset and rdev->sectors. So provide an exported function to do that. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:27:00 +10:00
md: move most content from md.h to md_k.h The extern function definitions are kernel-internal definitions, so they belong in md_k.h The MD_*_VERSION values could reasonably go in a number of places, but md_u.h seems most reasonable. This leaves almost nothing in md.h. It will go soon. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:33:13 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: move most content from md.h to md_k.h The extern function definitions are kernel-internal definitions, so they belong in md_k.h The MD_*_VERSION values could reasonably go in a number of places, but md_u.h seems most reasonable. This leaves almost nothing in md.h. It will go soon. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:33:13 +11:00
md: Use REQ_FAILFAST_* on metadata writes where appropriate This can only be supported on personalities which ensure that md_error() never causes an array to enter the 'failed' state. i.e. if marking a device Faulty would cause some data to be inaccessible, the device is status is left as non-Faulty. This is true for RAID1 and RAID10. If we get a failure writing metadata but the device doesn't fail, it must be the last device so we re-write without FAILFAST to improve chance of success. We also flag the device as LastDev so that future metadata updates don't waste time on failfast writes. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 16:16:11 +11:00
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 14:23:59 +10:00
md: use bio op accessors Separate the op from the rq_flag_bits and have md set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:32:07 -05:00
MD: change the parameter of md thread Change the thread parameter, so the thread can carry extra info. Next patch will use it. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:34:00 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: don't return -EAGAIN in md_allow_write for external metadata arrays This essentially reverts commit b5470dc5fc18 ("md: resolve external metadata handling deadlock in md_allow_write") with some adjustments. Since commit 6791875e2e53 ("md: make reconfig_mutex optional for writes to md sysfs files.") changing array_state to 'active' does not use mddev_lock() and will not cause a deadlock with md_allow_write(). This revert simplifies userspace tools that write to sysfs attributes like "stripe_cache_size" or "consistency_policy" because it removes the need for special handling for external metadata arrays, checking for EAGAIN and retrying the write. Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-08 11:56:55 +02:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md/raid: only permit hot-add of compatible integrity profiles It is not safe for an integrity profile to be changed while i/o is in-flight in the queue. Prevent adding new disks or otherwise online spares to an array if the device has an incompatible integrity profile. The original change to the blk_integrity_unregister implementation in md, commmit c7bfced9a671 "md: suspend i/o during runtime blk_integrity_unregister" introduced an immediate hang regression. This policy of disallowing changes the integrity profile once one has been established is shared with DM. Here is an abbreviated log from a test run that: 1/ Creates a degraded raid1 with an integrity-enabled device (pmem0s) [ 59.076127] 2/ Tries to add an integrity-disabled device (pmem1m) [ 90.489209] 3/ Retries with an integrity-enabled device (pmem1s) [ 205.671277] [ 59.076127] md/raid1:md0: active with 1 out of 2 mirrors [ 59.078302] md: data integrity enabled on md0 [..] [ 90.489209] md0: incompatible integrity profile for pmem1m [..] [ 205.671277] md: super_written gets error=-5 [ 205.677386] md/raid1:md0: Disk failure on pmem1m, disabling device. [ 205.677386] md/raid1:md0: Operation continuing on 1 devices. [ 205.683037] RAID1 conf printout: [ 205.684699] --- wd:1 rd:2 [ 205.685972] disk 0, wo:0, o:1, dev:pmem0s [ 205.687562] disk 1, wo:1, o:1, dev:pmem1s [ 205.691717] md: recovery of RAID array md0 Fixes: c7bfced9a671 ("md: suspend i/o during runtime blk_integrity_unregister") Cc: <stable@vger.kernel.org> Cc: Mike Snitzer <snitzer@redhat.com> Reported-by: NeilBrown <neilb@suse.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-13 16:00:07 -08:00
md: factor out parsing of fixed-point numbers safe_delay_store can parse fixed point numbers (for fractions of a second). We will want to do that for another sysfs file soon, so factor out the code. Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:49:55 +11:00
md: tiny md.h cleanups - update inclusion guard and make sure it covers the whole file - remove superflous #ifdef CONFIG_BLOCK - make sure all required headers are included so that new users aren't required to include others before Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
2009-04-14 12:01:53 +10:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
md: dm-raid should call helper function to clear rdev. dm-raid currently open-codes the freeing of some members of and rdev. It is more maintainable to have it call common code from md.c which does this for all call-sites. So remove free_disk_sb to md_rdev_clear, export it, and use it in dm-raid.c Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:54:30 +10:00
md: export various start/stop interfaces export entry points for starting and stopping md arrays. This will be used by a module to make md/raid5 work under dm. Also stop calling md_stop_writes from md_stop, as that won't work well with dm - it will want to call the two separately. Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-01 19:37:27 +10:00
md: separate request handling With commit cc27b0c78c79, pers->make_request could bail out without handling the bio. If that happens, we should retry. The commit fixes md_make_request but not other call sites. Separate the request handling part, so other call sites can use it. Reported-by: Nate Dailey <nate.dailey@stratus.com> Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start()) Cc: stable@vger.kernel.org Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-09-21 10:23:35 -07:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
md: use separate bio pool for each md device. bio_clone and bio_alloc allocate from a common bio pool. If an md device is stacked with other devices that use this pool, or under something like swap which uses the pool, then the multiple calls on the pool can cause deadlocks. So allocate a local bio pool for each md array and use that rather than the common pool. This pool is used both for regular IO and metadata updates. Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-26 18:31:13 +11:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
blk: centralize non-request unplug handling. Both md and umem has similar code for getting notified on an blk_finish_plug event. Centralize this code in block/ and allow each driver to provide its distinctive difference. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-31 09:08:14 +02:00
md-cluster: Improve md_reload_sb to be less error prone md_reload_sb is too simplistic and it explicitly needs to determine the changes made by the writing node. However, there are multiple areas where a simple reload could fail. Instead, read the superblock of one of the "good" rdevs and update the necessary information: - read the superblock into a newly allocated page, by temporarily swapping out rdev->sb_page and calling ->load_super. - if that fails return - if it succeeds, call check_sb_changes 1. iterates over list of active devices and checks the matching dev_roles[] value. If that is 'faulty', the device must be marked as faulty - call md_error to mark the device as faulty. Make sure not to set CHANGE_DEVS and wakeup mddev->thread or else it would initiate a resync process, which is the responsibility of the "primary" node. - clear the Blocked bit - Call remove_and_add_spares() to hot remove the device. If the device is 'spare': - call remove_and_add_spares() to get the number of spares added in this operation. - Reduce mddev->degraded to mark the array as not degraded. 2. reset recovery_cp - read the rest of the rdevs to update recovery_offset. If recovery_offset is equal to MaxSector, call spare_active() to set it In_sync This required that recovery_offset be initialized to MaxSector, as opposed to zero so as to communicate the end of sync for a rdev. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-08-21 10:33:39 -05:00
Add new disk to clustered array Algorithm: 1. Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues ioctl(ADD_NEW_DISC with disc.state set to MD_DISK_CLUSTER_ADD) 2. Node 1 sends NEWDISK with uuid and slot number 3. Other nodes issue kobject_uevent_env with uuid and slot number (Steps 4,5 could be a udev rule) 4. In userspace, the node searches for the disk, perhaps using blkid -t SUB_UUID="" 5. Other nodes issue either of the following depending on whether the disk was found: ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CANDIDATE and disc.number set to slot number) ioctl(CLUSTERED_DISK_NACK) 6. Other nodes drop lock on no-new-devs (CR) if device is found 7. Node 1 attempts EX lock on no-new-devs 8. If node 1 gets the lock, it sends METADATA_UPDATED after unmarking the disk as SpareLocal 9. If not (get no-new-dev lock), it fails the operation and sends METADATA_UPDATED 10. Other nodes understand if the device is added or not by reading the superblock again after receiving the METADATA_UPDATED message. Signed-off-by: Lidong Zhong <lzhong@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-10-29 18:51:31 -05:00
md: Export and rename kick_rdev_from_array This export is required for clustering module in order to co-ordinate remove/readd a rdev from all nodes. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-14 10:43:24 -05:00
md: Export and rename find_rdev_nr_rcu This is required by the clustering module (patches to follow) to find the device to remove or re-add. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-14 10:43:55 -05:00
md: wakeup thread upon rdev_dec_pending() After each call to rdev_dec_pending() we should wakeup the md thread if the device is found to be faulty. Otherwise we'll incur heavy delays on failing devices. Signed-off-by: Neil Brown <nfbrown@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de>
2012-07-26 11:12:18 +02:00
Introduce md_cluster_operations to handle cluster functions This allows dynamic registering of cluster hooks. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-29 10:01:53 -05:00
Introduce md_cluster_info md_cluster_info stores the cluster information in the MD device. The join() is called when mddev detects it is a clustered device. The main responsibilities are: 1. Setup a DLM lockspace 2. Setup all initial locks such as super block locks and bitmap lock (will come later) The leave() clears up the lockspace and all the locks held. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-29 10:20:02 -05:00
md: cleanup mddev flag clear for takeover Commit 6995f0b (md: takeover should clear unrelated bits) clear unrelated bits, but it's quite fragile. To avoid error in the future, define a macro for unsupported mddev flags for each raid type and use it to clear unsupported mddev flags. This should be less error-prone. Suggested-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-01-04 16:10:19 -08:00
md: disable WRITE SAME if it fails in underlayer disks This makes md do the same thing as dm for write same IO failure. Please see 7eee4ae(dm: disable WRITE SAME if it fails) for details why we need this. We did a little bit different than dm. Instead of disabling writesame in the first IO error, we disable it till next writesame IO coming after the first IO error. This way we don't need to clone a bio. Also reported here: https://bugzilla.kernel.org/show_bug.cgi?id=118581 Suggested-by: NeilBrown <neilb@suse.com> Acked-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-02-13 16:21:49 -08:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
md: disable WRITE SAME if it fails in underlayer disks This makes md do the same thing as dm for write same IO failure. Please see 7eee4ae(dm: disable WRITE SAME if it fails) for details why we need this. We did a little bit different than dm. Instead of disabling writesame in the first IO error, we disable it till next writesame IO coming after the first IO error. This way we don't need to clone a bio. Also reported here: https://bugzilla.kernel.org/show_bug.cgi?id=118581 Suggested-by: NeilBrown <neilb@suse.com> Acked-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-02-13 16:21:49 -08:00
md: support REQ_OP_WRITE_ZEROES Copy & paste from the REQ_OP_WRITE_SAME code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05 19:21:03 +02:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
md: support REQ_OP_WRITE_ZEROES Copy & paste from the REQ_OP_WRITE_SAME code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05 19:21:03 +02:00
md: tiny md.h cleanups - update inclusion guard and make sure it covers the whole file - remove superflous #ifdef CONFIG_BLOCK - make sure all required headers are included so that new users aren't required to include others before Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
2009-04-14 12:01:53 +10:00