kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/net/rxrpc/misc.c

90 lines
2.7 KiB
Raw Permalink Normal View History

rxrpc: Move some miscellaneous bits out into their own file Move some miscellaneous bits out into their own file to make it easier to split the call handling. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 17:23:16 +01:00
rxrpc: Limit the listening backlog Limit the socket incoming call backlog queue size so that a remote client can't pump in sufficient new calls that the server runs out of memory. Note that this is partially theoretical at the moment since whilst the number of calls is limited, the number of packets trying to set up new calls is not. This will be addressed in a later patch. If the caller of listen() specifies a backlog INT_MAX, then they get the current maximum; anything else greater than max_backlog or anything negative incurs EINVAL. The limit on the maximum queue size can be set by: echo N >/proc/sys/net/rxrpc/max_backlog where 4<=N<=32. Further, set the default backlog to 0, requiring listen() to be called before we start actually queueing new calls. Whilst this kind of is a change in the UAPI, the caller can't actually *accept* new calls anyway unless they've first called listen() to put the socket into the LISTENING state - thus the aforementioned new calls would otherwise just sit there, eating up kernel memory. (Note that sockets that don't have a non-zero service ID bound don't get incoming calls anyway.) Given that the default backlog is now 0, make the AFS filesystem call kernel_listen() to set the maximum backlog for itself. Possible improvements include: (1) Trimming a too-large backlog to max_backlog when listen is called. (2) Trimming the backlog value whenever the value is used so that changes to max_backlog are applied to an open socket automatically. Note that the AFS filesystem opens one socket and keeps it open for extended periods, so would miss out on changes to max_backlog. (3) Having a separate setting for the AFS filesystem. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 22:30:37 +01:00
rxrpc: Keep the call timeouts as ktimes rather than jiffies Keep that call timeouts as ktimes rather than jiffies so that they can be expressed as functions of RTT. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-26 22:12:49 +01:00
rxrpc: Move some miscellaneous bits out into their own file Move some miscellaneous bits out into their own file to make it easier to split the call handling. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 17:23:16 +01:00
rxrpc: Keep the call timeouts as ktimes rather than jiffies Keep that call timeouts as ktimes rather than jiffies so that they can be expressed as functions of RTT. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-26 22:12:49 +01:00
rxrpc: Move some miscellaneous bits out into their own file Move some miscellaneous bits out into their own file to make it easier to split the call handling. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 17:23:16 +01:00
rxrpc: Keep the call timeouts as ktimes rather than jiffies Keep that call timeouts as ktimes rather than jiffies so that they can be expressed as functions of RTT. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-26 22:12:49 +01:00
rxrpc: Move some miscellaneous bits out into their own file Move some miscellaneous bits out into their own file to make it easier to split the call handling. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 17:23:16 +01:00
rxrpc: Keep the call timeouts as ktimes rather than jiffies Keep that call timeouts as ktimes rather than jiffies so that they can be expressed as functions of RTT. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-26 22:12:49 +01:00
rxrpc: Move some miscellaneous bits out into their own file Move some miscellaneous bits out into their own file to make it easier to split the call handling. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 17:23:16 +01:00
rxrpc: Keep the call timeouts as ktimes rather than jiffies Keep that call timeouts as ktimes rather than jiffies so that they can be expressed as functions of RTT. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-26 22:12:49 +01:00
rxrpc: Move some miscellaneous bits out into their own file Move some miscellaneous bits out into their own file to make it easier to split the call handling. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 17:23:16 +01:00
rxrpc: Keep the call timeouts as ktimes rather than jiffies Keep that call timeouts as ktimes rather than jiffies so that they can be expressed as functions of RTT. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-26 22:12:49 +01:00
rxrpc: Move some miscellaneous bits out into their own file Move some miscellaneous bits out into their own file to make it easier to split the call handling. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 17:23:16 +01:00
rxrpc: Correctly initialise, limit and transmit call->rx_winsize call->rx_winsize should be initialised to the sysctl setting and the sysctl setting should be limited to the maximum we want to permit. Further, we need to place this in the ACK info instead of the sysctl setting. Furthermore, discard the idea of accepting the subpackets of a jumbo packet that lie beyond the receive window when the first packet of the jumbo is within the window. Just discard the excess subpackets instead. This allows the receive window to be opened up right to the buffer size less one for the dead slot. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-13 22:36:22 +01:00
rxrpc: Move some miscellaneous bits out into their own file Move some miscellaneous bits out into their own file to make it easier to split the call handling. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 17:23:16 +01:00
rxrpc: Split sendmsg from packet transmission code Split the sendmsg code from the packet transmission code (mostly to be found in output.c). Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-02 22:39:45 +01:00
rxrpc: Obtain RTT data by requesting ACKs on DATA packets In addition to sending a PING ACK to gain RTT data, we can set the RXRPC_REQUEST_ACK flag on a DATA packet and get a REQUESTED-ACK ACK. The ACK packet contains the serial number of the packet it is in response to, so we can look through the Tx buffer for a matching DATA packet. This requires that the data packets be stamped with the time of transmission as a ktime rather than having the resend_at time in jiffies. This further requires the resend code to do the resend determination in ktimes and convert to jiffies to set the timer. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-22 00:29:31 +01:00
rxrpc: Split sendmsg from packet transmission code Split the sendmsg code from the packet transmission code (mostly to be found in output.c). Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-02 22:39:45 +01:00
rxrpc: Obtain RTT data by requesting ACKs on DATA packets In addition to sending a PING ACK to gain RTT data, we can set the RXRPC_REQUEST_ACK flag on a DATA packet and get a REQUESTED-ACK ACK. The ACK packet contains the serial number of the packet it is in response to, so we can look through the Tx buffer for a matching DATA packet. This requires that the data packets be stamped with the time of transmission as a ktime rather than having the resend_at time in jiffies. This further requires the resend code to do the resend determination in ktimes and convert to jiffies to set the timer. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-22 00:29:31 +01:00
rxrpc: Split sendmsg from packet transmission code Split the sendmsg code from the packet transmission code (mostly to be found in output.c). Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-02 22:39:45 +01:00
rxrpc: Move some miscellaneous bits out into their own file Move some miscellaneous bits out into their own file to make it easier to split the call handling. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 17:23:16 +01:00
rxrpc: Send pings to get RTT data Send a PING ACK packet to the peer when we get a new incoming call from a peer we don't have a record for. The PING RESPONSE ACK packet will tell us the following about the peer: (1) its receive window size (2) its MTU sizes (3) its support for jumbo DATA packets (4) if it supports slow start (similar to RFC 5681) (5) an estimate of the RTT This is necessary because the peer won't normally send us an ACK until it gets to the Rx phase and we send it a packet, but we would like to know some of this information before we start sending packets. A pair of tracepoints are added so that RTT determination can be observed. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-22 00:29:31 +01:00
rxrpc: Move some miscellaneous bits out into their own file Move some miscellaneous bits out into their own file to make it easier to split the call handling. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 17:23:16 +01:00