kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/mfd/ab8500-debugfs.c

3249 lines
68 KiB
Raw Permalink Normal View History

mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Make it explicitly non-modular The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config AB8500_DEBUG drivers/mfd/Kconfig: bool "Enable debug info via debugfs" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-29 21:24:37 -04:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debug: Add wake-up info Add information regarding what ab interrupt that caused a wake-up from suspend in <debugfs>/ab8500/interrupts. Also print the name of the interrupts, not just the numbers. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Per FORLIN <per.forlin@stericsson.com> Tested-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-31 07:57:07 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500: Fix compile error When compiling the AB8500 core driver in the latest MFD tree the following happens: CC drivers/mfd/ab8500-debugfs.o /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:3: error: 'AB8500_SYS_CTRL1_BLOCK' undeclared here (not in a function) /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:2: error: array index in initializer not of integer type /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:2: error: (near initialization for 'debug_ranges') (...) This is due to a missing include statement, so fix it up. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-06 23:23:01 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500: Pass AB8500 IRQ to debugfs code by resource The AB8500 debug code which was merged in parallell with the multiplatform work incidentally introduced a new instance using the <mach/irqs.h> header which is now deleted, causing this build regression: drivers/mfd/ab8500-debugfs.c:95:23: fatal error: mach/irqs.h: No such file or directory compilation terminated. make[4]: *** [drivers/mfd/ab8500-debugfs.o] Error 1 The code most certainly never worked with device tree either since that does not rely on this kind of hard-coded interrupt numbers. Fix the problem at the root by passing it as a named resource from the ab8500-core driver. Use an untyped resource to stop the MFD core from remapping this IRQ relative to the AB8500 irqdomain. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-12 17:02:09 +02:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Generically describe interactions with the DB8500 PRCMU There is only one method used to communicate with the DB8500 PRCMU, via I2C. Now this can be assumed, there is no requirement to specify the protocol in the function name. This patch removes protocol specifics and uses a more generic naming convention. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-20 13:56:38 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Generically describe interactions with the DB8500 PRCMU There is only one method used to communicate with the DB8500 PRCMU, via I2C. Now this can be assumed, there is no requirement to specify the protocol in the function name. This patch removes protocol specifics and uses a more generic naming convention. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-20 13:56:38 +01:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Prevent initialised field from being over-written Due to the lack of parity in the way array fields have been named/ numbered, a mistake was made where more debug fields were declared than actually existed. In doing so, 2 fields were added, which although unclear, were already declared in the array. The result was that the latter declarations trashed the former ones. This patch places the array back in the correct order and removes the offending NULL entries. While we're at it, let's ensure this doesn't happen again by naming each field properly and add a new *_LAST define to describe how many fields there should be. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-14 11:14:30 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debug: Add support for ab8505 and ab9540 Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-06 16:11:50 +02:00
mfd: ab8500-debugfs: Staticize local variables Local variables referenced only in this file are made static. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-23 17:37:42 +05:30
mfd: ab8500-debugfs: Prevent initialised field from being over-written Due to the lack of parity in the way array fields have been named/ numbered, a mistake was made where more debug fields were declared than actually existed. In doing so, 2 fields were added, which although unclear, were already declared in the array. The result was that the latter declarations trashed the former ones. This patch places the array back in the correct order and removes the offending NULL entries. While we're at it, let's ensure this doesn't happen again by naming each field properly and add a new *_LAST define to describe how many fields there should be. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-14 11:14:30 +01:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debugfs: Use NULL to initialise remaining NULL pointer Partly for coding style reasons, but mostly because sparse warns on it. This patch is a completion of a previous patch by Mark Brown. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 17:17:34 +00:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formatting WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * the output is wanted in any case */ WARNING: Consecutive strings are generally better as a single string + " addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n", total: 0 errors, 4 warnings, 3331 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-28 09:27:32 +00:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: Use NULL to initialise NULL pointers in ab8500-debugfs Partly for coding style reasons, but mostly because sparse warns on it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-13 14:06:47 +00:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debugfs: Prevent initialised field from being over-written Due to the lack of parity in the way array fields have been named/ numbered, a mistake was made where more debug fields were declared than actually existed. In doing so, 2 fields were added, which although unclear, were already declared in the array. The result was that the latter declarations trashed the former ones. This patch places the array back in the correct order and removes the offending NULL entries. While we're at it, let's ensure this doesn't happen again by naming each field properly and add a new *_LAST define to describe how many fields there should be. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-14 11:14:30 +01:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: Use NULL to initialise NULL pointers in ab8500-debugfs Partly for coding style reasons, but mostly because sparse warns on it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-13 14:06:47 +00:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debugfs: Set the USB charging current to 300mA for ABV3 In case of AB-V3, the eye diagram related issues are resolved. So, set the device charging current to 300mA when connected to standard host. Also, add the USB PHY tuning values to improve the USB eye diagram Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: <thirupathi.chippakurthy@stericsson.com>
2011-10-17 09:48:55 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debugfs: Set the USB charging current to 300mA for ABV3 In case of AB-V3, the eye diagram related issues are resolved. So, set the device charging current to 300mA when connected to standard host. Also, add the USB PHY tuning values to improve the USB eye diagram Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: <thirupathi.chippakurthy@stericsson.com>
2011-10-17 09:48:55 +02:00
mfd: ab8500-debug: Add support for ab8505 and ab9540 Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-06 16:11:50 +02:00
mfd: ab8500-debugfs: Set the USB charging current to 300mA for ABV3 In case of AB-V3, the eye diagram related issues are resolved. So, set the device charging current to 300mA when connected to standard host. Also, add the USB PHY tuning values to improve the USB eye diagram Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: <thirupathi.chippakurthy@stericsson.com>
2011-10-17 09:48:55 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: Use NULL to initialise NULL pointers in ab8500-debugfs Partly for coding style reasons, but mostly because sparse warns on it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-13 14:06:47 +00:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debugfs: Prevent initialised field from being over-written Due to the lack of parity in the way array fields have been named/ numbered, a mistake was made where more debug fields were declared than actually existed. In doing so, 2 fields were added, which although unclear, were already declared in the array. The result was that the latter declarations trashed the former ones. This patch places the array back in the correct order and removes the offending NULL entries. While we're at it, let's ensure this doesn't happen again by naming each field properly and add a new *_LAST define to describe how many fields there should be. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-14 11:14:30 +01:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: Use NULL to initialise NULL pointers in ab8500-debugfs Partly for coding style reasons, but mostly because sparse warns on it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-13 14:06:47 +00:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debugfs: Prevent initialised field from being over-written Due to the lack of parity in the way array fields have been named/ numbered, a mistake was made where more debug fields were declared than actually existed. In doing so, 2 fields were added, which although unclear, were already declared in the array. The result was that the latter declarations trashed the former ones. This patch places the array back in the correct order and removes the offending NULL entries. While we're at it, let's ensure this doesn't happen again by naming each field properly and add a new *_LAST define to describe how many fields there should be. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-14 11:14:30 +01:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: Use NULL to initialise NULL pointers in ab8500-debugfs Partly for coding style reasons, but mostly because sparse warns on it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-13 14:06:47 +00:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Staticize local variables Local variables referenced only in this file are made static. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-23 17:37:42 +05:30
mfd: ab8500-debug: Add support for ab8505 and ab9540 Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-06 16:11:50 +02:00
mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formatting WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * the output is wanted in any case */ WARNING: Consecutive strings are generally better as a single string + " addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n", total: 0 errors, 4 warnings, 3331 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-28 09:27:32 +00:00
mfd: ab8500-debug: Add support for ab8505 and ab9540 Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-06 16:11:50 +02:00
mfd: ab8500-debugfs: Staticize local variables Local variables referenced only in this file are made static. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-23 17:37:42 +05:30
mfd: ab8500-debug: Add register map for ab8540. Required to read out correct debug information from the AB chip. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19 12:20:03 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formatting WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * the output is wanted in any case */ WARNING: Consecutive strings are generally better as a single string + " addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n", total: 0 errors, 4 warnings, 3331 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-28 09:27:32 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: ab8500-debug: Print banks in hex This patch changes bank prints to use hex value. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Daniel WILLERUD <daniel.willerud@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-28 15:53:58 +02:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: ab8500-debug: Add register map for ab8540. Required to read out correct debug information from the AB chip. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19 12:20:03 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: ab8500-core: Allow the possibility to dump all AB8500 registers Implement an API so that a user may dump all AB8500 registers via debugfs file access. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-27 11:35:41 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-core: Allow the possibility to dump all AB8500 registers Implement an API so that a user may dump all AB8500 registers via debugfs file access. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-27 11:35:41 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-core: Allow the possibility to dump all AB8500 registers Implement an API so that a user may dump all AB8500 registers via debugfs file access. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-27 11:35:41 +01:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Use kstrtoul_from_user in ab8500 This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-06 22:43:32 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: Use kstrtoul_from_user in ab8500 This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-06 22:43:32 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Use kstrtoul_from_user in ab8500 This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-06 22:43:32 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Use kstrtoul_from_user in ab8500 This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-06 22:43:32 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: Use kstrtoul_from_user in ab8500 This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-06 22:43:32 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: Use kstrtoul_from_user in ab8500 This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-06 22:43:32 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Use kstrtoul_from_user in ab8500 This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-06 22:43:32 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: Use kstrtoul_from_user in ab8500 This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-06 22:43:32 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Use kstrtoul_from_user in ab8500 This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-06 22:43:32 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Add interrupt debug This patch adds an entry in debugfs to check number of interrupts from the AB. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-02-14 13:01:00 +01:00
mfd: ab8500-debug: Add wake-up info Add information regarding what ab interrupt that caused a wake-up from suspend in <debugfs>/ab8500/interrupts. Also print the name of the interrupts, not just the numbers. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Per FORLIN <per.forlin@stericsson.com> Tested-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-31 07:57:07 +02:00
mfd: ab8500-debugfs: Add interrupt debug This patch adds an entry in debugfs to check number of interrupts from the AB. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-02-14 13:01:00 +01:00
mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine() There are no other functions which can over-ride it. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-14 11:56:34 +01:00
mfd: ab8500-debugfs: Add interrupt debug This patch adds an entry in debugfs to check number of interrupts from the AB. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-02-14 13:01:00 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Add interrupt debug This patch adds an entry in debugfs to check number of interrupts from the AB. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-02-14 13:01:00 +01:00
mfd: ab8500-debug: Add wake-up info Add information regarding what ab interrupt that caused a wake-up from suspend in <debugfs>/ab8500/interrupts. Also print the name of the interrupts, not just the numbers. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Per FORLIN <per.forlin@stericsson.com> Tested-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-31 07:57:07 +02:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debug: Add wake-up info Add information regarding what ab interrupt that caused a wake-up from suspend in <debugfs>/ab8500/interrupts. Also print the name of the interrupts, not just the numbers. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Per FORLIN <per.forlin@stericsson.com> Tested-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-31 07:57:07 +02:00
mfd: ab8500-debugfs: Move dereference after check for NULL We dereference "desc" before check if it is NULL. I've shifted it around so we check first before dereferencing. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-11-13 10:40:30 +03:00
mfd: ab8500-debug: Add wake-up info Add information regarding what ab interrupt that caused a wake-up from suspend in <debugfs>/ab8500/interrupts. Also print the name of the interrupts, not just the numbers. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Per FORLIN <per.forlin@stericsson.com> Tested-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-31 07:57:07 +02:00
mfd: ab8500-debugfs: Add interrupt debug This patch adds an entry in debugfs to check number of interrupts from the AB. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-02-14 13:01:00 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: Dump sim registers This patch allows to dump the SIM registers from debugfs. It will temporary change the config to allow APE side to read the SIM registers. Note that this read can cause problem on modem side since the modem can't read these registers while the operation is ongoing. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:03:33 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Dump sim registers This patch allows to dump the SIM registers from debugfs. It will temporary change the config to allow APE side to read the SIM registers. Note that this read can cause problem on modem side since the modem can't read these registers while the operation is ongoing. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:03:33 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Dump sim registers This patch allows to dump the SIM registers from debugfs. It will temporary change the config to allow APE side to read the SIM registers. Note that this read can cause problem on modem side since the modem can't read these registers while the operation is ongoing. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:03:33 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-04-18 15:52:59 +02:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debug: Add ADC input channel usb_id in debugfs Signed-off-by: Yang QU <yang.qu@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Alexandre BOURDIOL <alexandre.bourdiol@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:04:37 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debug: Add ADC input channel usb_id in debugfs Signed-off-by: Yang QU <yang.qu@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Alexandre BOURDIOL <alexandre.bourdiol@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:04:37 +00:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-debugfs: Simplify invalid debugfs data checking Noticed during a coding review, if we reorganised the checking a little, we can rid the code of a pointless 'else'. Whilst looking for this particular code hunk I noticed another pointless 'else', which I've subsequently fixed in this patch. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-02 11:22:10 +01:00
mfd: ab8500-debugfs: fix "between" in printk fix spelling mistake, beetween -> between Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-25 22:42:25 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-debugfs: Simplify invalid debugfs data checking Noticed during a coding review, if we reorganised the checking a little, we can rid the code of a pointless 'else'. Whilst looking for this particular code hunk I noticed another pointless 'else', which I've subsequently fixed in this patch. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-02 11:22:10 +01:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Remove use of seq_printf return value The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-21 18:53:43 -08:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formatting WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * the output is wanted in any case */ WARNING: Consecutive strings are generally better as a single string + " addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n", total: 0 errors, 4 warnings, 3331 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-28 09:27:32 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: Replace strict_strtoul() with kstrtoul() in ab* and att* The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-06-04 13:11:50 +09:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Simplify invalid debugfs data checking Noticed during a coding review, if we reorganised the checking a little, we can rid the code of a pointless 'else'. Whilst looking for this particular code hunk I noticed another pointless 'else', which I've subsequently fixed in this patch. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-02 11:22:10 +01:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for sysfs The AB8500 debugfs driver allocates memory for a new sysfs entry, but fails to apply the proper post-allocation checks. If the device were to run out of memory, the allocation would return NULL. Without the correct checks the driver will continue to populate NULL->[show|store|...], which would obviously cause a pointer dereference Oops. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-07-19 08:44:50 +01:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for event name The AB8500 debugfs driver allocates memory to contain the name of a new sysfs entry, but fails to apply the proper post-allocation checks. If the device were to run out of memory, the allocation would return NULL. Without the correct checks the driver will continue to populate address NULL with the specified device name which would obviously cause a pointer dereference Oops. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-07-19 08:53:24 +01:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Pass the IRQF_ONESHOT flag Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-05-16 15:42:15 -03:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Keep count of IRQs in debugfs This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
2010-11-19 17:55:11 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 15:11:00 +05:30
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Add interrupt debug This patch adds an entry in debugfs to check number of interrupts from the AB. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-02-14 13:01:00 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: remove use of __devinit CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-19 13:23:04 -05:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500: Pass AB8500 IRQ to debugfs code by resource The AB8500 debug code which was merged in parallell with the multiplatform work incidentally introduced a new instance using the <mach/irqs.h> header which is now deleted, causing this build regression: drivers/mfd/ab8500-debugfs.c:95:23: fatal error: mach/irqs.h: No such file or directory compilation terminated. make[4]: *** [drivers/mfd/ab8500-debugfs.o] Error 1 The code most certainly never worked with device tree either since that does not rely on this kind of hard-coded interrupt numbers. Fix the problem at the root by passing it as a named resource from the ab8500-core driver. Use an untyped resource to stop the MFD core from remapping this IRQ relative to the AB8500 irqdomain. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-12 17:02:09 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500-debug: Convert to managed resources for allocating memory Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-23 16:25:05 +01:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500-debug: Convert to managed resources for allocating memory Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-23 16:25:05 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500-debug: Convert to managed resources for allocating memory Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-23 16:25:05 +01:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500-debug: Convert to managed resources for allocating memory Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-23 16:25:05 +01:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500-debug: Convert to managed resources for allocating memory Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-23 16:25:05 +01:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500: Pass AB8500 IRQ to debugfs code by resource The AB8500 debug code which was merged in parallell with the multiplatform work incidentally introduced a new instance using the <mach/irqs.h> header which is now deleted, causing this build regression: drivers/mfd/ab8500-debugfs.c:95:23: fatal error: mach/irqs.h: No such file or directory compilation terminated. make[4]: *** [drivers/mfd/ab8500-debugfs.o] Error 1 The code most certainly never worked with device tree either since that does not rely on this kind of hard-coded interrupt numbers. Fix the problem at the root by passing it as a named resource from the ab8500-core driver. Use an untyped resource to stop the MFD core from remapping this IRQ relative to the AB8500 irqdomain. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-12 17:02:09 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500: Pass AB8500 IRQ to debugfs code by resource The AB8500 debug code which was merged in parallell with the multiplatform work incidentally introduced a new instance using the <mach/irqs.h> header which is now deleted, causing this build regression: drivers/mfd/ab8500-debugfs.c:95:23: fatal error: mach/irqs.h: No such file or directory compilation terminated. make[4]: *** [drivers/mfd/ab8500-debugfs.o] Error 1 The code most certainly never worked with device tree either since that does not rely on this kind of hard-coded interrupt numbers. Fix the problem at the root by passing it as a named resource from the ab8500-core driver. Use an untyped resource to stop the MFD core from remapping this IRQ relative to the AB8500 irqdomain. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-12 17:02:09 +02:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debug: Convert to managed resources for allocating memory Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-23 16:25:05 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debug: Convert to managed resources for allocating memory Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-23 16:25:05 +01:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: add debugfs node to read all registers Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-01-26 15:39:20 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: ab8500-debug: Add support for ab8505 and ab9540 Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-06 16:11:50 +02:00
mfd: ab8500-debugfs: Add interrupt debug This patch adds an entry in debugfs to check number of interrupts from the AB. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-02-14 13:01:00 +01:00
mfd: ab8500-debug: Add support for ab8505 and ab9540 Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-06 16:11:50 +02:00
mfd: ab8500-debugfs: Add interrupt debug This patch adds an entry in debugfs to check number of interrupts from the AB. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-02-14 13:01:00 +01:00
mfd: ab8500-debug: Add support for ab8505 and ab9540 Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-06 16:11:50 +02:00
mfd: ab8500-debugfs: Add interrupt debug This patch adds an entry in debugfs to check number of interrupts from the AB. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-02-14 13:01:00 +01:00
mfd: ab8500-debug: Add support for ab8505 and ab9540 Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-06 16:11:50 +02:00
mfd: ab8500-debug: Add register map for ab8540. Required to read out correct debug information from the AB chip. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19 12:20:03 +01:00
mfd: ab8500-debugfs: Add tests for ab8540 based platform initialisations Signed-off-by: Alexandre Torgue <alexandre.torgue@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Maxime COQUELIN <maxime.coquelin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:09:41 +00:00
mfd: ab8500-debug: Add support for ab8505 and ab9540 Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-06 16:11:50 +02:00
mfd: ab8500-debugfs: Add interrupt debug This patch adds an entry in debugfs to check number of interrupts from the AB. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-02-14 13:01:00 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Add interrupt debug This patch adds an entry in debugfs to check number of interrupts from the AB. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-02-14 13:01:00 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Dump sim registers This patch allows to dump the SIM registers from debugfs. It will temporary change the config to allow APE side to read the SIM registers. Note that this read can cause problem on modem side since the modem can't read these registers while the operation is ongoing. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:03:33 +00:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: John Beckett <john.beckett@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-05-31 13:54:27 +01:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debug: Add ADC input channel usb_id in debugfs Signed-off-by: Yang QU <yang.qu@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Alexandre BOURDIOL <alexandre.bourdiol@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:04:37 +00:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debug: Add ADC input channel usb_id in debugfs Signed-off-by: Yang QU <yang.qu@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Alexandre BOURDIOL <alexandre.bourdiol@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:04:37 +00:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 12:05:15 +00:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:02:31 +00:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 14:09:08 +00:00
mfd: ab8500-debugfs: BIG clean-up When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-14 18:29:16 +01:00
mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-26 10:06:55 +00:00
mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-14 16:10:36 +00:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2011-04-08 16:26:36 +02:00
mfd: ab8500-debugfs: Remove unnecessary null test before debugfs_remove_recursive Fix checkpatch warning: WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-28 13:58:17 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-02-03 11:19:05 +01:00
mfd: ab8500-debug: Convert to managed resources for allocating memory Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-23 16:25:05 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: ab8500-debugfs: Make it explicitly non-modular The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config AB8500_DEBUG drivers/mfd/Kconfig: bool "Enable debug info via debugfs" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-29 21:24:37 -04:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00
mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 13:06:39 +01:00
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 16:05:04 +02:00