kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/pci/vc.c

433 lines
12 KiB
Raw Permalink Normal View History

PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2 These are set of two capability registers, it's pretty much given that they're registers, so reflect their purpose in the name. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:57 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Use dev->has_secondary_link to find downstream PCIe links Previously we assumed that PCIe Root Ports and Downstream Ports had Links on their secondary side. That is true in most systems, but it is possible to connect a switch with either an Upstream or a Downstream Port leading downstream. Instead of relying on the component type to identify devices that have links leading downstream, use the "dev->has_secondary_link" field. [bhelgaas: changelog] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-05-21 15:05:04 +08:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2 These are set of two capability registers, it's pretty much given that they're registers, so reflect their purpose in the name. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:57 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2 These are set of two capability registers, it's pretty much given that they're registers, so reflect their purpose in the name. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:57 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2 These are set of two capability registers, it's pretty much given that they're registers, so reflect their purpose in the name. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:57 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2 These are set of two capability registers, it's pretty much given that they're registers, so reflect their purpose in the name. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:57 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2 These are set of two capability registers, it's pretty much given that they're registers, so reflect their purpose in the name. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:57 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2 These are set of two capability registers, it's pretty much given that they're registers, so reflect their purpose in the name. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:57 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Fix unaligned accesses in VC code The save/restore buffers for VC state is first composed of a 2-byte control register, then a bunch of 4-byte words. This causes unaligned accesses which trap on platform such as sparc. This is easy to fix by simply moving the buffer pointer forward by 4 bytes instead of 2 after dealing with the control register. The length adjustment needs to be changed likewise as well. Fixes: 5f8fc43217a0 ("PCI: Include pci/pcie/Kconfig directly from pci/Kconfig") Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.6+
2016-06-18 23:52:25 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Fix unaligned accesses in VC code The save/restore buffers for VC state is first composed of a 2-byte control register, then a bunch of 4-byte words. This causes unaligned accesses which trap on platform such as sparc. This is easy to fix by simply moving the buffer pointer forward by 4 bytes instead of 2 after dealing with the control register. The length adjustment needs to be changed likewise as well. Fixes: 5f8fc43217a0 ("PCI: Include pci/pcie/Kconfig directly from pci/Kconfig") Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.6+
2016-06-18 23:52:25 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2 These are set of two capability registers, it's pretty much given that they're registers, so reflect their purpose in the name. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:57 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2 These are set of two capability registers, it's pretty much given that they're registers, so reflect their purpose in the name. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:57 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2 These are set of two capability registers, it's pretty much given that they're registers, so reflect their purpose in the name. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:57 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2 These are set of two capability registers, it's pretty much given that they're registers, so reflect their purpose in the name. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:57 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00
PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2 These are set of two capability registers, it's pretty much given that they're registers, so reflect their purpose in the name. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:57 -07:00
PCI: Add Virtual Channel to save/restore support While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 16:43:51 -07:00