kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/rtc/rtc-max77686.c

864 lines
22 KiB
Raw Permalink Normal View History

rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Add support for MAX20024/MAX77620 RTC IP Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-02 14:06:24 +05:30
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Add support for MAX20024/MAX77620 RTC IP Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-02 14:06:24 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: fix checkpatch error Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:30 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: fix checkpatch error Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:30 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: fix checkpatch error Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:30 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: fix checkpatch error Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:30 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: fix checkpatch error Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:30 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: fix checkpatch error Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:30 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Add support for MAX20024/MAX77620 RTC IP Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-02 14:06:24 +05:30
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Use REGMAP_IRQ_REG for regmap-rtc-irqs initialisation Use macro REGMAP_IRQ_REG from regmap.h to initialise the regmap irq table for max77686 to have better coding style and improve readability. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-02 14:06:25 +05:30
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: Add support for MAX20024/MAX77620 RTC IP Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-02 14:06:24 +05:30
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: Add support for MAX20024/MAX77620 RTC IP Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-02 14:06:24 +05:30
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: Add support for MAX20024/MAX77620 RTC IP Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-02 14:06:24 +05:30
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: fix checkpatch error Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:30 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: fix checkpatch error Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:30 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Use ffs() to calculate tm_wday max77686_rtc_calculate_wday() is used to calculate the day of the week to be filled in struct rtc_time but that function only calculates the number of bits shifted. So the ffs() function can be used to find the first bit set instead of a special function. [akpm@linux-foundation.org: add comment clarifying ffs() use] Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-13 15:53:03 -07:00
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
drivers/rtc/rtc-max77686.c: remove space before semicolon Fixes the following warning: WARNING: space prohibited before semicolon Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 15:05:55 -07:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Fix unsupported year message The max77686 RTC only supports a range of 99 years so instead of using year 1900 as the base, the year 2000 is used. This means that 1900 to 1999 are unsupported years. The driver was printing a warning for those values but was returning a error so for consistency, print an error message instead and don't say that a year 2000 is assumed, since the year is not set. Also, it is better to use dev_* log functions instead of pr_* to print information about the device in the kernel log in a standardized way. This also allows to remove the local pr_fmt() defined macro. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:43 -03:00
rtc: use more standard kernel logging styles Neaten the logging a bit by adding #define pr_fmt Miscellanea: o Remove __FILE__/__func__ uses o Coalesce formats adding missing spaces o Align arguments o (rtc-cmos) Integrated 2 consecutive messages Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16 12:46:14 -07:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: fix checkpatch error Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:30 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Cleanup and reduce dmesg output Cleanup of entire driver of its dmesg output: 1. Remove printing of the function name, because printing device name is sufficient. This also makes the dev_err()-like functions more compact and readable (not need of line break). 2. Lower from info to debug printing of each RTC interrupt (no need to make noise on each alarm). 3. Remove dev_info() at beginning of probe because a message is already always printed by either probe failure or from registering the RTC device as /dev/rtcX. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 15:46:11 +09:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Cleanup and reduce dmesg output Cleanup of entire driver of its dmesg output: 1. Remove printing of the function name, because printing device name is sufficient. This also makes the dev_err()-like functions more compact and readable (not need of line break). 2. Lower from info to debug printing of each RTC interrupt (no need to make noise on each alarm). 3. Remove dev_info() at beginning of probe because a message is already always printed by either probe failure or from registering the RTC device as /dev/rtcX. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 15:46:11 +09:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Cleanup and reduce dmesg output Cleanup of entire driver of its dmesg output: 1. Remove printing of the function name, because printing device name is sufficient. This also makes the dev_err()-like functions more compact and readable (not need of line break). 2. Lower from info to debug printing of each RTC interrupt (no need to make noise on each alarm). 3. Remove dev_info() at beginning of probe because a message is already always printed by either probe failure or from registering the RTC device as /dev/rtcX. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 15:46:11 +09:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Cleanup and reduce dmesg output Cleanup of entire driver of its dmesg output: 1. Remove printing of the function name, because printing device name is sufficient. This also makes the dev_err()-like functions more compact and readable (not need of line break). 2. Lower from info to debug printing of each RTC interrupt (no need to make noise on each alarm). 3. Remove dev_info() at beginning of probe because a message is already always printed by either probe failure or from registering the RTC device as /dev/rtcX. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 15:46:11 +09:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add support for MAX20024/MAX77620 RTC IP Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-02 14:06:24 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add support for MAX20024/MAX77620 RTC IP Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-02 14:06:24 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Fix max77686_rtc_read_alarm() return value The function is always returning zero even in case of failures since the ret value was not propagated to the callers. Fix the error path. Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:37 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: Cleanup and reduce dmesg output Cleanup of entire driver of its dmesg output: 1. Remove printing of the function name, because printing device name is sufficient. This also makes the dev_err()-like functions more compact and readable (not need of line break). 2. Lower from info to debug printing of each RTC interrupt (no need to make noise on each alarm). 3. Remove dev_info() at beginning of probe because a message is already always printed by either probe failure or from registering the RTC device as /dev/rtcX. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 15:46:11 +09:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Cleanup and reduce dmesg output Cleanup of entire driver of its dmesg output: 1. Remove printing of the function name, because printing device name is sufficient. This also makes the dev_err()-like functions more compact and readable (not need of line break). 2. Lower from info to debug printing of each RTC interrupt (no need to make noise on each alarm). 3. Remove dev_info() at beginning of probe because a message is already always printed by either probe failure or from registering the RTC device as /dev/rtcX. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 15:46:11 +09:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: Cleanup and reduce dmesg output Cleanup of entire driver of its dmesg output: 1. Remove printing of the function name, because printing device name is sufficient. This also makes the dev_err()-like functions more compact and readable (not need of line break). 2. Lower from info to debug printing of each RTC interrupt (no need to make noise on each alarm). 3. Remove dev_info() at beginning of probe because a message is already always printed by either probe failure or from registering the RTC device as /dev/rtcX. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 15:46:11 +09:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Cleanup and reduce dmesg output Cleanup of entire driver of its dmesg output: 1. Remove printing of the function name, because printing device name is sufficient. This also makes the dev_err()-like functions more compact and readable (not need of line break). 2. Lower from info to debug printing of each RTC interrupt (no need to make noise on each alarm). 3. Remove dev_info() at beginning of probe because a message is already always printed by either probe failure or from registering the RTC device as /dev/rtcX. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 15:46:11 +09:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Cleanup and reduce dmesg output Cleanup of entire driver of its dmesg output: 1. Remove printing of the function name, because printing device name is sufficient. This also makes the dev_err()-like functions more compact and readable (not need of line break). 2. Lower from info to debug printing of each RTC interrupt (no need to make noise on each alarm). 3. Remove dev_info() at beginning of probe because a message is already always printed by either probe failure or from registering the RTC device as /dev/rtcX. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 15:46:11 +09:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: fix checkpatch error Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:30 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Cleanup and reduce dmesg output Cleanup of entire driver of its dmesg output: 1. Remove printing of the function name, because printing device name is sufficient. This also makes the dev_err()-like functions more compact and readable (not need of line break). 2. Lower from info to debug printing of each RTC interrupt (no need to make noise on each alarm). 3. Remove dev_info() at beginning of probe because a message is already always printed by either probe failure or from registering the RTC device as /dev/rtcX. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 15:46:11 +09:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: avoid reference of parent device info multiple places Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:32 +05:30
rtc: max77686: Add an indirection level to access RTC registers The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:41 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Cleanup and reduce dmesg output Cleanup of entire driver of its dmesg output: 1. Remove printing of the function name, because printing device name is sufficient. This also makes the dev_err()-like functions more compact and readable (not need of line break). 2. Lower from info to debug printing of each RTC interrupt (no need to make noise on each alarm). 3. Remove dev_info() at beginning of probe because a message is already always printed by either probe failure or from registering the RTC device as /dev/rtcX. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 15:46:11 +09:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Add support for MAX20024/MAX77620 RTC IP Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-02 14:06:24 +05:30
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
mfd: max77686: Convert to use regmap_irq By using the generic IRQ support in the Register map API, it is possible to get rid max77686-irq.c and simplify the code. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-04 22:24:04 +02:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
drivers/rtc/rtc-max77686.c: use devm_kzalloc() Use devm_kzalloc() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 16:18:30 -07:00
rtc: max77686: fix checkpatch error Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:30 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
mfd: max77686: Convert to use regmap_irq By using the generic IRQ support in the Register map API, it is possible to get rid max77686-irq.c and simplify the code. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-04 22:24:04 +02:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: rtc-max77686: use devm_rtc_device_register() devm_rtc_device_register() is device managed and makes cleanup paths simpler. Also, this patch uses devm_request_threaded_irq(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 16:19:05 -07:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
mfd: max77686: Convert to use regmap_irq By using the generic IRQ support in the Register map API, it is possible to get rid max77686-irq.c and simplify the code. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-04 22:24:04 +02:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
mfd: max77686: Convert to use regmap_irq By using the generic IRQ support in the Register map API, it is possible to get rid max77686-irq.c and simplify the code. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-04 22:24:04 +02:00
rtc: max77686: Properly handle regmap_irq_get_virq() error code The regmap_irq_get_virq() can return 0 or -EINVAL in error conditions but driver checked only for value of 0. This could lead to a cast of -EINVAL to an unsigned int used as a interrupt number for devm_request_threaded_irq(). Although this is not yet fatal (devm_request_threaded_irq() will just fail with -EINVAL) but might be a misleading when diagnosing errors. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 6f1c1e71d933 ("mfd: max77686: Convert to use regmap_irq") Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-04 09:26:35 +09:00
drivers/rtc/rtc-max77686.c: fix incorrect return value on error 'ret' was not initialized to error code before returning. While at it also remove some redundant code and cleanup. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Chiwoong Byun <woong.byun@samsung.com> Cc: Jonghwa Lee <jonghwa3.lee@samsung.com> Cc: Laxman dewangan <ldewangan@nvidia.com> Cc: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 16:20:12 -07:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
drivers/rtc/rtc-max77686.c: fix incorrect return value on error 'ret' was not initialized to error code before returning. While at it also remove some redundant code and cleanup. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Chiwoong Byun <woong.byun@samsung.com> Cc: Jonghwa Lee <jonghwa3.lee@samsung.com> Cc: Laxman dewangan <ldewangan@nvidia.com> Cc: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 16:20:12 -07:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: Allow the max77686 rtc to wakeup the system This series add support for the Real Time clock present in the Maxim 77802 Power Managment IC. The version number is quite high because it previously was part of a bigger series [0] that aimed to add support for all the devices in the max77802 PMIC. But now that the max77802 dependencies were already merged for 3.17, the series were split but I kept the version numbering. While working on the max77802 rtc support a lot of feedback was given and the issues pointed out also apply to a driver for a similar PMIC RTC (max77686). So patches 01/06 to 05/06 in the series are cleanups for the max77686 driver and patch 06/06 adds the support for the max77802 RTC. The series were tested on an Exynos5250 Snow (max77686) and Exynos5420 Peach Pit (max77802) machines. This patch (of 6): The max77686 includes an RTC that keeps power during suspend. It's convenient to be able to use it as a wakeup source. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-13 15:52:55 -07:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Use a driver data struct instead hard-coded values The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:40 -03:00
rtc: max77686: Add max77802 support The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27 00:36:42 -03:00
rtc: max77686: Add support for MAX20024/MAX77620 RTC IP Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-02 14:06:24 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Report platform modalias to fix module autoload If the rtc-max77686 driver is built as a module, modalias information is not filled so the module is not autoloaded. Use the MODULE_DEVICE_TABLE() macro to export the platform ID table so the module contains that data. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-05-13 17:18:01 +02:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: Allow the max77686 rtc to wakeup the system This series add support for the Real Time clock present in the Maxim 77802 Power Managment IC. The version number is quite high because it previously was part of a bigger series [0] that aimed to add support for all the devices in the max77802 PMIC. But now that the max77802 dependencies were already merged for 3.17, the series were split but I kept the version numbering. While working on the max77802 rtc support a lot of feedback was given and the issues pointed out also apply to a driver for a similar PMIC RTC (max77686). So patches 01/06 to 05/06 in the series are cleanups for the max77686 driver and patch 06/06 adds the support for the max77802 RTC. The series were tested on an Exynos5250 Snow (max77686) and Exynos5420 Peach Pit (max77802) machines. This patch (of 6): The max77686 includes an RTC that keeps power during suspend. It's convenient to be able to use it as a wakeup source. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-13 15:52:55 -07:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
rtc: max77686: move initialisation of rtc regmap, irq chip locally To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-09 22:56:34 +05:30
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
drivers/rtc/rtc-max77686.c: use module_platform_driver() Use module_platform_driver() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 16:18:28 -07:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00
drivers/rtc/rtc-max77686.c: add missing module author name Add missing module author name to MODULE_AUTHOR macro. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 16:18:29 -07:00
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 16:44:26 -08:00