kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/include/misc/cxl-base.h

62 lines
1.8 KiB
Raw Permalink Normal View History

cxl: Add new header for call backs and structs This new header adds callbacks and structs needed by the rest of the kernel to hook into the cxl infrastructure. This adds the cxl_ctx_in_use() function for use in the mm code to see if any cxl contexts are currently in use. This is used by the tlbie() to determine if it can do local TLB invalidations or not. This also adds get/put calls for the cxl driver module to refcount the active cxl contexts. cxl_ctx_get/put/in_use are static inlined here as they are called in tlbie which we want to be fast (mpe's suggestion). Empty functions are provided when CONFIG_CXL_BASE is not enabled. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-08 19:54:56 +11:00
cxl: Move include file cxl.h -> cxl-base.h This moves the current include file from cxl.h -> cxl-base.h. This current include file is used only to pass information between the base driver that needs to be built into the kernel and the cxl module. This is to make way for a new include/misc/cxl.h which will contain just the kernel API for other driver to use Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-27 16:07:16 +10:00
cxl: Add new header for call backs and structs This new header adds callbacks and structs needed by the rest of the kernel to hook into the cxl infrastructure. This adds the cxl_ctx_in_use() function for use in the mm code to see if any cxl contexts are currently in use. This is used by the tlbie() to determine if it can do local TLB invalidations or not. This also adds get/put calls for the cxl driver module to refcount the active cxl contexts. cxl_ctx_get/put/in_use are static inlined here as they are called in tlbie which we want to be fast (mpe's suggestion). Empty functions are provided when CONFIG_CXL_BASE is not enabled. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-08 19:54:56 +11:00
cxl: Allow a default context to be associated with an external pci_dev The cxl kernel API has a concept of a default context associated with each PCI device under the virtual PHB. The Mellanox CX4 will also use the cxl kernel API, but it does not use a virtual PHB - rather, the AFU appears as a physical function as a peer to the networking functions. In order to allow the kernel API to work with those networking functions, we will need to associate a default context with them as well. To this end, refactor the corresponding code to do this in vphb.c and export it so that it can be called from the PHB code. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 07:17:04 +10:00
cxl: Add new header for call backs and structs This new header adds callbacks and structs needed by the rest of the kernel to hook into the cxl infrastructure. This adds the cxl_ctx_in_use() function for use in the mm code to see if any cxl contexts are currently in use. This is used by the tlbie() to determine if it can do local TLB invalidations or not. This also adds get/put calls for the cxl driver module to refcount the active cxl contexts. cxl_ctx_get/put/in_use are static inlined here as they are called in tlbie which we want to be fast (mpe's suggestion). Empty functions are provided when CONFIG_CXL_BASE is not enabled. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-08 19:54:56 +11:00
cxl: Move cxl_afu_get / cxl_afu_put to base The Mellanox CX4 uses a model where the AFU is one physical function of the device, and is used by other peer physical functions of the same device. This will require those other devices to grab a reference on the AFU when they are initialised to make sure that it does not go away during their lifetime. Move the AFU refcount functions to base.c so they can be called from the PHB code. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 07:17:03 +10:00
cxl: Add new header for call backs and structs This new header adds callbacks and structs needed by the rest of the kernel to hook into the cxl infrastructure. This adds the cxl_ctx_in_use() function for use in the mm code to see if any cxl contexts are currently in use. This is used by the tlbie() to determine if it can do local TLB invalidations or not. This also adds get/put calls for the cxl driver module to refcount the active cxl contexts. cxl_ctx_get/put/in_use are static inlined here as they are called in tlbie which we want to be fast (mpe's suggestion). Empty functions are provided when CONFIG_CXL_BASE is not enabled. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-08 19:54:56 +11:00
cxl: Allow a default context to be associated with an external pci_dev The cxl kernel API has a concept of a default context associated with each PCI device under the virtual PHB. The Mellanox CX4 will also use the cxl kernel API, but it does not use a virtual PHB - rather, the AFU appears as a physical function as a peer to the networking functions. In order to allow the kernel API to work with those networking functions, we will need to associate a default context with them as well. To this end, refactor the corresponding code to do this in vphb.c and export it so that it can be called from the PHB code. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 07:17:04 +10:00
cxl: Add support for interrupts on the Mellanox CX4 The Mellanox CX4 in cxl mode uses a hybrid interrupt model, where interrupts are routed from the networking hardware to the XSL using the MSIX table, and from there will be transformed back into an MSIX interrupt using the cxl style interrupts (i.e. using IVTE entries and ranges to map a PE and AFU interrupt number to an MSIX address). We want to hide the implementation details of cxl interrupts as much as possible. To this end, we use a special version of the MSI setup & teardown routines in the PHB while in cxl mode to allocate the cxl interrupts and configure the IVTE entries in the process element. This function does not configure the MSIX table - the CX4 card uses a custom format in that table and it would not be appropriate to fill that out in generic code. The rest of the functionality is similar to the "Full MSI-X mode" described in the CAIA, and this could be easily extended to support other adapters that use that mode in the future. The interrupts will be associated with the default context. If the maximum number of interrupts per context has been limited (e.g. by the mlx5 driver), it will automatically allocate additional kernel contexts to associate extra interrupts as required. These contexts will be started using the same WED that was used to start the default context. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 07:17:10 +10:00
cxl: Add new header for call backs and structs This new header adds callbacks and structs needed by the rest of the kernel to hook into the cxl infrastructure. This adds the cxl_ctx_in_use() function for use in the mm code to see if any cxl contexts are currently in use. This is used by the tlbie() to determine if it can do local TLB invalidations or not. This also adds get/put calls for the cxl driver module to refcount the active cxl contexts. cxl_ctx_get/put/in_use are static inlined here as they are called in tlbie which we want to be fast (mpe's suggestion). Empty functions are provided when CONFIG_CXL_BASE is not enabled. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-08 19:54:56 +11:00
cxl: Move cxl_afu_get / cxl_afu_put to base The Mellanox CX4 uses a model where the AFU is one physical function of the device, and is used by other peer physical functions of the same device. This will require those other devices to grab a reference on the AFU when they are initialised to make sure that it does not go away during their lifetime. Move the AFU refcount functions to base.c so they can be called from the PHB code. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 07:17:03 +10:00
cxl: Add new header for call backs and structs This new header adds callbacks and structs needed by the rest of the kernel to hook into the cxl infrastructure. This adds the cxl_ctx_in_use() function for use in the mm code to see if any cxl contexts are currently in use. This is used by the tlbie() to determine if it can do local TLB invalidations or not. This also adds get/put calls for the cxl driver module to refcount the active cxl contexts. cxl_ctx_get/put/in_use are static inlined here as they are called in tlbie which we want to be fast (mpe's suggestion). Empty functions are provided when CONFIG_CXL_BASE is not enabled. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-08 19:54:56 +11:00
cxl: Allow a default context to be associated with an external pci_dev The cxl kernel API has a concept of a default context associated with each PCI device under the virtual PHB. The Mellanox CX4 will also use the cxl kernel API, but it does not use a virtual PHB - rather, the AFU appears as a physical function as a peer to the networking functions. In order to allow the kernel API to work with those networking functions, we will need to associate a default context with them as well. To this end, refactor the corresponding code to do this in vphb.c and export it so that it can be called from the PHB code. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 07:17:04 +10:00
cxl: Add support for interrupts on the Mellanox CX4 The Mellanox CX4 in cxl mode uses a hybrid interrupt model, where interrupts are routed from the networking hardware to the XSL using the MSIX table, and from there will be transformed back into an MSIX interrupt using the cxl style interrupts (i.e. using IVTE entries and ranges to map a PE and AFU interrupt number to an MSIX address). We want to hide the implementation details of cxl interrupts as much as possible. To this end, we use a special version of the MSI setup & teardown routines in the PHB while in cxl mode to allocate the cxl interrupts and configure the IVTE entries in the process element. This function does not configure the MSIX table - the CX4 card uses a custom format in that table and it would not be appropriate to fill that out in generic code. The rest of the functionality is similar to the "Full MSI-X mode" described in the CAIA, and this could be easily extended to support other adapters that use that mode in the future. The interrupts will be associated with the default context. If the maximum number of interrupts per context has been limited (e.g. by the mlx5 driver), it will automatically allocate additional kernel contexts to associate extra interrupts as required. These contexts will be started using the same WED that was used to start the default context. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 07:17:10 +10:00
cxl: Add new header for call backs and structs This new header adds callbacks and structs needed by the rest of the kernel to hook into the cxl infrastructure. This adds the cxl_ctx_in_use() function for use in the mm code to see if any cxl contexts are currently in use. This is used by the tlbie() to determine if it can do local TLB invalidations or not. This also adds get/put calls for the cxl driver module to refcount the active cxl contexts. cxl_ctx_get/put/in_use are static inlined here as they are called in tlbie which we want to be fast (mpe's suggestion). Empty functions are provided when CONFIG_CXL_BASE is not enabled. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-08 19:54:56 +11:00