kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/net/mac802154/rx.c

311 lines
7.5 KiB
Raw Permalink Normal View History

mac802154: RX data path Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:21 +00:00
mac802154: rx: simplify crc receive handling This patch change the actual crc handling while receive. Currently the IEEE802154_HW_RX_OMIT_CKSUM flag is used to filter a frame with a bad crc. This patch changes the behaviour of IEEE802154_HW_RX_OMIT_CKSUM to add a crc while receiving for the monitor interface. After monitor receiving we remove the crc for frame parsing. This affect the driver layer because all drivers sets IEEE802154_HW_RX_OMIT_CKSUM and deliver without checksum. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:36 +01:00
mac802154: RX data path Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:21 +00:00
mac802154: use new nl802154 iftype types This patch replace the depracted IEEE802154_DEV to the new introduced NL802154_IFTYPE_NODE types. There is a backwards compatibility to have the identical types for both enum definitions. Also remove some inlcude issue with "linux/nl802154.h", because the export nl_policy inside this header it was always necessary to have an include of "net/rtnetlink.h" before. The reason for this is more complicated. Nevertheless we removed this now, because "linux/nl802154.h" is the depracted netlink interface. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17 08:20:49 +01:00
mac802154: RX data path Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:21 +00:00
mac802154: move mac802154.h to ieee802154_i.h This patch moves the mac802154.h internal header to ieee802154_i.h like the wireless stack ieee80211_i.h file. This avoids confusing with the not internal header include/net/mac802154.h header. Additional we get the same naming conversion like mac80211 for this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 09:41:00 +02:00
mac802154: RX data path Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:21 +00:00
mac802154: rx: remove unnecessary parameter This patch removes a not used parameter in ieee802154_deliver_skb. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:35 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: add CHECKSUM_UNNECESSARY This patch adds CHECKSUM_UNNECESSARY to skb->ip_summed before delivery. There exist no transceiver with IP checksum functionality. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:36 +01:00
mac802154: rx: move skb->protocol setting This patch moves the skb->protocol setting to the position when it's needed. It's only needed when frame parsing was successful. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:35 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: change naming convention This patch changes the naming convention of mac802154 rx file. It should be more named like mac80211 stack. Furthermore we introduce a new frame parsing implementation which is much similar the mac80211 implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:43 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: move mac pib attributes into wpan_dev This patch moves all mac pib attributes into the wpan_dev struct. Furthermore we can easier access these attributes over the netdev 802154_ptr pointer. Currently this is only possible over a complicated callback structure in mac802154 because subif data structure is accessable inside mac802154 only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-09 08:36:45 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: move mac pib attributes into wpan_dev This patch moves all mac pib attributes into the wpan_dev struct. Furthermore we can easier access these attributes over the netdev 802154_ptr pointer. Currently this is only possible over a complicated callback structure in mac802154 because subif data structure is accessable inside mac802154 only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-09 08:36:45 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: move mac pib attributes into wpan_dev This patch moves all mac pib attributes into the wpan_dev struct. Furthermore we can easier access these attributes over the netdev 802154_ptr pointer. Currently this is only possible over a complicated callback structure in mac802154 because subif data structure is accessable inside mac802154 only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-09 08:36:45 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: use goto label on failure Signed-off-by: Varka Bhadram <varkab@cdac.in> Reviewed-by: Stefan Schmidt <s.schmidt@samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-05 17:19:09 +05:30
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: add comments for llsec issues While doing a little test with the llsec implementation I saw these issues. We should move decryption and encruption somewhere else, otherwise while capturing with wireshark the mac header shows secuirty fields but the payload is plaintext. A complete other issue is what doing with HardMAC drivers where the payload is always plaintext. I think we need a special handling then in userspace. We currently doesn't support any HardMAC transceivers, so we should fix the first issue for SoftMAC transceivers. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-28 09:00:26 +02:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: don't warn on unsupported frames Just because we don't support certain types of frames yet doesn't mean we have to flood the message log with warnings about "invalid" frames. Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-25 11:46:40 -04:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: remove unnecessary parameter This patch removes a not used parameter in ieee802154_deliver_skb. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:35 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: use rate limited warnings for malformed frames Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-25 11:46:41 -04:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: change naming convention This patch changes the naming convention of mac802154 rx file. It should be more named like mac80211 stack. Furthermore we introduce a new frame parsing implementation which is much similar the mac80211 implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:43 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: change naming convention This patch changes the naming convention of mac802154 rx file. It should be more named like mac80211 stack. Furthermore we introduce a new frame parsing implementation which is much similar the mac80211 implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:43 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: move skb_reset_mac_header This patch moves the skb_reset_mac_header call before frame parsing while wpan rx and before monitor deliver functionality. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:38 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: change naming convention This patch changes the naming convention of mac802154 rx file. It should be more named like mac80211 stack. Furthermore we introduce a new frame parsing implementation which is much similar the mac80211 implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:43 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: change naming convention This patch changes the naming convention of mac802154 rx file. It should be more named like mac80211 stack. Furthermore we introduce a new frame parsing implementation which is much similar the mac80211 implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:43 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: change naming convention This patch changes the naming convention of mac802154 rx file. It should be more named like mac80211 stack. Furthermore we introduce a new frame parsing implementation which is much similar the mac80211 implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:43 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx packet handle cleanup This patch replaces !netif_running(sdata->dev) with !ieee802154_sdata_running(sdata) and also devide the code two separate if branches. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12 12:44:24 +05:30
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: change naming convention This patch changes the naming convention of mac802154 rx file. It should be more named like mac80211 stack. Furthermore we introduce a new frame parsing implementation which is much similar the mac80211 implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:43 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: Delete an unnecessary check before the function call "kfree_skb" The kfree_skb() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-14 20:22:41 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: tx: remove monitor receive while xmit This removes the call of monitor receive funktion when any interface type call xmit. There exist no such use case that a monitor interface should receive the actual sending frame. One use case could be that a wpan interface and monitor interface could be running at the same time on one phy. Then the monitor interface receives the wpan frames also. Furthermore we adding support for promiscous mode setting. With promiscous mode setting we can't run a wpan and monitor interface at the same time. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:33 +01:00
mac802154: rx: change naming convention This patch changes the naming convention of mac802154 rx file. It should be more named like mac80211 stack. Furthermore we introduce a new frame parsing implementation which is much similar the mac80211 implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:43 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: move skb_reset_mac_header This patch moves the skb_reset_mac_header call before frame parsing while wpan rx and before monitor deliver functionality. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:38 +01:00
mac802154: rx: add CHECKSUM_UNNECESSARY This patch adds CHECKSUM_UNNECESSARY to skb->ip_summed before delivery. There exist no transceiver with IP checksum functionality. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:36 +01:00
mac802154: rx: add monitor pkt_type information This patch adds a PACKET_OTHERHOST setting when a monitor interface receives a skb. All receiving skb's to the monitor interface should be PACKET_OTHERHOST. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:37 +01:00
mac802154: rx: move skb->protocol setting This patch moves the skb->protocol setting to the position when it's needed. It's only needed when frame parsing was successful. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:35 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: remove unneeded vif struct This patch removes the virtual interface structure from sub if data struct, because it isn't used anywhere. This structure could be useful for give per interface information at softmac driver layer. Nevertheless there exist no use case currently and it contains the interface type information currently. This information is also stored inside wpan dev which is now used to check on the wpan dev interface type. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06 17:30:46 +02:00
mac802154: rx: monitor receive cleanup This patch replace the !netif_running(sdata->dev) instead we doing a !ieee802154_sdata_running(sdata). Also move this in two separate if branches to compare with mac80211 code. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:41 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: add error handling after skb_clone This patch adds error handling after skb_clone and deliver only if skb_clone was successful. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:42 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: rx: add error handling after skb_clone This patch adds error handling after skb_clone and deliver only if skb_clone was successful. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:42 +01:00
mac802154: rx: move receive handling into rx.c This patch removes all relevant receiving functions inclusive frame parsing into rx file. Like mac80211 we should implement the complete receive handling and parsing in this file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:32 +01:00
mac802154: fix ieee802154_rx handling Instead of passing ieee802154_hw pointer to ieee802154_rx, we can directly pass the ieee802154_local pointer. Signed-off-by: Varka Bhadram <varkabhadram@gmail.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-07 10:50:43 +05:30
mac802154: RX data path Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:21 +00:00
mac802154: rx: add software checksum filtering check This patch adds a new hardware flag which indicate that the transceiver doesn't support check for bad checksum via hardware. Also add a handling of this while receive. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:37 +01:00
mac802154: RX data path Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:21 +00:00
mac802154: rx: rename remove mac802154_subif_rx This patch removes the mac802154_subif_rx function and do the necessary calls inside of ieee802154_rx function. The ieee802154_rx is small enough to move the functionality inside this function. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:34 +01:00
mac802154: cfg: add suspend and resume callbacks This patch introduces suspend and resume callbacks to mac802154. When doing suspend we calling the stop driver callback which should stop the receiving of frames. A transceiver should go into low-power mode then. Calling resume will call the start driver callback, which starts receiving again and allow to transmit frames. This was tested only with the fakelb driver and a qemu vm by doing the following commands: echo "devices" > /sys/power/pm_test echo "freeze" > /sys/power/state while doing some high traffic between two fakelb phys. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-24 11:36:36 +02:00
mac802154: rx: simplify crc receive handling This patch change the actual crc handling while receive. Currently the IEEE802154_HW_RX_OMIT_CKSUM flag is used to filter a frame with a bad crc. This patch changes the behaviour of IEEE802154_HW_RX_OMIT_CKSUM to add a crc while receiving for the monitor interface. After monitor receiving we remove the crc for frame parsing. This affect the driver layer because all drivers sets IEEE802154_HW_RX_OMIT_CKSUM and deliver without checksum. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:36 +01:00
mac802154: rx: add software checksum filtering check This patch adds a new hardware flag which indicate that the transceiver doesn't support check for bad checksum via hardware. Also add a handling of this while receive. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:37 +01:00
mac802154: rx: simplify crc receive handling This patch change the actual crc handling while receive. Currently the IEEE802154_HW_RX_OMIT_CKSUM flag is used to filter a frame with a bad crc. This patch changes the behaviour of IEEE802154_HW_RX_OMIT_CKSUM to add a crc while receiving for the monitor interface. After monitor receiving we remove the crc for frame parsing. This affect the driver layer because all drivers sets IEEE802154_HW_RX_OMIT_CKSUM and deliver without checksum. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:36 +01:00
mac802154: RX data path Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:21 +00:00
mac802154: rx: move rcu locking Instead of twice lock and unlock mechanism this patch hold these locks only once at one position. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:39 +01:00
mac802154: rx: change naming convention This patch changes the naming convention of mac802154 rx file. It should be more named like mac80211 stack. Furthermore we introduce a new frame parsing implementation which is much similar the mac80211 implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:43 +01:00
mac802154: rx: simplify crc receive handling This patch change the actual crc handling while receive. Currently the IEEE802154_HW_RX_OMIT_CKSUM flag is used to filter a frame with a bad crc. This patch changes the behaviour of IEEE802154_HW_RX_OMIT_CKSUM to add a crc while receiving for the monitor interface. After monitor receiving we remove the crc for frame parsing. This affect the driver layer because all drivers sets IEEE802154_HW_RX_OMIT_CKSUM and deliver without checksum. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:36 +01:00
mac802154: rx: add software checksum filtering check This patch adds a new hardware flag which indicate that the transceiver doesn't support check for bad checksum via hardware. Also add a handling of this while receive. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:37 +01:00
mac802154: cfg: add suspend and resume callbacks This patch introduces suspend and resume callbacks to mac802154. When doing suspend we calling the stop driver callback which should stop the receiving of frames. A transceiver should go into low-power mode then. Calling resume will call the start driver callback, which starts receiving again and allow to transmit frames. This was tested only with the fakelb driver and a qemu vm by doing the following commands: echo "devices" > /sys/power/pm_test echo "freeze" > /sys/power/state while doing some high traffic between two fakelb phys. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-24 11:36:36 +02:00
mac802154: rx: add software checksum filtering check This patch adds a new hardware flag which indicate that the transceiver doesn't support check for bad checksum via hardware. Also add a handling of this while receive. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:37 +01:00
mac802154: rx: simplify crc receive handling This patch change the actual crc handling while receive. Currently the IEEE802154_HW_RX_OMIT_CKSUM flag is used to filter a frame with a bad crc. This patch changes the behaviour of IEEE802154_HW_RX_OMIT_CKSUM to add a crc while receiving for the monitor interface. After monitor receiving we remove the crc for frame parsing. This affect the driver layer because all drivers sets IEEE802154_HW_RX_OMIT_CKSUM and deliver without checksum. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 21:34:36 +01:00
mac802154: rx: change naming convention This patch changes the naming convention of mac802154 rx file. It should be more named like mac80211 stack. Furthermore we introduce a new frame parsing implementation which is much similar the mac80211 implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:43 +01:00
mac802154: don't deliver packets to devices that are down Only one WPAN devices can be active at any given time, so only deliver packets to that one interface that is actually up. Multiple monitors may be up at any given time, but we don't have to deliver to monitors that are down either. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11 12:03:07 +02:00
mac802154: rx: move rcu locking Instead of twice lock and unlock mechanism this patch hold these locks only once at one position. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:39 +01:00
mac802154: cfg: add suspend and resume callbacks This patch introduces suspend and resume callbacks to mac802154. When doing suspend we calling the stop driver callback which should stop the receiving of frames. A transceiver should go into low-power mode then. Calling resume will call the start driver callback, which starts receiving again and allow to transmit frames. This was tested only with the fakelb driver and a qemu vm by doing the following commands: echo "devices" > /sys/power/pm_test echo "freeze" > /sys/power/state while doing some high traffic between two fakelb phys. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-24 11:36:36 +02:00
mac802154: RX data path Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:21 +00:00
ieee802154: rename ieee802154_dev to ieee802154_hw The identical struct of the wireless stack implementation is named ieee80211_hw. This is useful to name the variable hw instead of get confusing with netdev dev variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:34 +02:00
mac802154: RX data path Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:21 +00:00
mac802154: introduce hw_to_local function This patch replace the mac802154_to_priv macro with a static inline function named hw_to_local. This brings a similar naming convention like mac80211 stack. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25 17:16:39 +02:00
mac802154: RX data path Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:21 +00:00
mac802154: rx: use tasklet instead workqueue Tasklets have much less overhead than workqueues. This patch also removes the heap allocation for the worker on receiving path. Like mac80211 we should prefer use a tasklet here instead a workqueue to getting fast out of interrupt context when ieee802154_rx_irqsafe is called by driver. Like wireless inside the tasklet context we should call netif_receive_skb instead netif_rx_ni anymore. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 17:13:30 +01:00
mac802154: RX data path Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 20:50:21 +00:00