kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/net/tun.c

2914 lines
67 KiB
Raw Permalink Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[TUNTAP]: Allow setting the linktype of the tap device from userspace Currently tun/tap only supports the EN10MB ARP type. For use with wireless and other networking types it should be possible to set the ARP type via an ioctl. Patch v2: Included check that the tap interface is down before changing the link type out from underneath it Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-01 17:40:05 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: Use eth_random_addr Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12 19:33:09 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-02 19:15:33 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net/tun: handle compat_ioctl directly The tun driver is the only code in the kernel that operates on a character device with struct ifreq. Change the driver to handle the conversion itself so we can contain the remaining ifreq handling in the socket layer. This also fixes a bug in the handling of invalid ioctl numbers on an unbound tun device. The driver treats this as a TUNSETIFF in native mode, but there is no way for the generic compat_ioctl() function to emulate this behaviour. Possibly the driver was only doing this accidentally anyway, but if any code relies on this misfeature, it now also works in compat mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06 22:52:32 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: hardware vlan tx support Inspired by commit f09e2249c4f5c7c13261ec73f5a7807076af0c8e (macvtap: restore vlan header on user read). This patch adds hardware vlan tx support for tuntap. This is done by copying vlan header directly into userspace in tun_put_user() instead of doing it through __vlan_put_tag() in dev_hard_start_xmit(). This eliminates one unnecessary memmove() in vlan_insert_tag() for 802.1ad and 802.1q traffic. pktgen test shows about 20% improvement for 802.1q traffic: Before: 662149pps 317Mb/sec (317831520bps) errors: 0 After: 801033pps 384Mb/sec (384495840bps) errors: 0 Cc: Basil Gor <basil.gor@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25 13:00:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[TUN]: Make the tun_dev_list per-net. Remove the static tun_dev_list and replace its occurrences in driver with per-net one. It is used in two places - in tun_set_iff and tun_cleanup. In the first case it's legal to use current net_ns. In the cleanup call - move the loop, that unregisters all devices in net exit hook. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 00:41:16 -07:00
tun: Allow GSO using virtio_net_hdr Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:48:02 -07:00
tun: socket filter support This patch adds Linux Socket Filter support to tun driver. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14 01:01:10 +00:00
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 11:56:21 -07:00
[TUN]: Introduce the tun_net structure and init/exit net ops. This is the first step in making tuntap devices work in net namespaces. The structure mentioned is pointed by generic net pointer with tun_net_id id, and tun driver fills one on its load. It will contain only the tun devices list. So declare this structure and introduce net init and exit hooks. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 00:40:46 -07:00
tun: Implement ip link del tunXXX This greatly simplifies testing to verify I have fixed the problems with a tun device disappearing when the tun file descriptor is still held open. Further it allows removal network namespace operations for the tun driver. Reducing the network namespace handling in the driver to the minimum. i.e. When we are creating a tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 16:02:16 -08:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tun: add device name(iff) field to proc fdinfo entry A file descriptor opened for /dev/net/tun and a tun device are connected with ioctl. Though understanding the connection is important for trouble shooting, no way is given to a user to know the connected device for a given file descriptor at userland. This patch adds a new fdinfo field for the device name connected to a file descriptor opened for /dev/net/tun. Here is an example of the field: # lsof | grep tun qemu-syst 4565 qemu 25u CHR 10,200 0t138 12921 /dev/net/tun ... # cat /proc/4565/fdinfo/25 pos: 138 flags: 0104002 iff: vnet0 # ip link show dev vnet0 8: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 ... changelog: v2: indent iff just like the other fdinfo fields are. v3: remove unused variable. Both are suggested by David Miller <davem@davemloft.net>. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-29 16:43:31 +09:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Replace <asm/uaccess.h> with <linux/uaccess.h> globally This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: make struct tun_struct private to tun.c There's no reason for this to be in the header, and it just hurts recompile time. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyanskiy <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:48:58 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: make struct tun_struct private to tun.c There's no reason for this to be in the header, and it just hurts recompile time. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyanskiy <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:48:58 -07:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
net: make struct tun_struct private to tun.c There's no reason for this to be in the header, and it just hurts recompile time. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyanskiy <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:48:58 -07:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: reserve extra headroom only when XDP is set We reserve headroom unconditionally which could cause unnecessary stress on socket memory accounting because of increased trusesize. Fix this by only reserve extra headroom when XDP is set. Cc: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:08 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tun: move internal flag defines out of uapi TUN_ flags are internal and never exposed to userspace. Any application using it is almost certainly buggy. Move them out to tun.c. Note: we remove these completely in follow-up patches, this code movement is split out for ease of review. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 14:44:40 +02:00
tun: drop broken IFF_VNET_LE Use TUNSETVNETLE/TUNGETVNETLE instead. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-16 15:05:06 +02:00
macvtap/tun: cross-endian support for little-endian hosts The VNET_LE flag was introduced to fix accesses to virtio 1.0 headers that are always little-endian. It can also be used to handle the special case of a legacy little-endian device implemented by a big-endian host. Let's add a flag and ioctls for big-endian devices as well. If both flags are set, little-endian wins. Since this is isn't a common usecase, the feature is controlled by a kernel config option (not set by default). Both macvtap and tun are covered by this patch since they share the same API with userland. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2015-04-24 14:50:36 +02:00
tun: move internal flag defines out of uapi TUN_ flags are internal and never exposed to userspace. Any application using it is almost certainly buggy. Move them out to tun.c. Note: we remove these completely in follow-up patches, this code movement is split out for ease of review. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 14:44:40 +02:00
tun: drop broken IFF_VNET_LE Use TUNSETVNETLE/TUNGETVNETLE instead. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-16 15:05:06 +02:00
tun: experimental zero copy tx support Let vhost-net utilize zero copy tx when used with tun. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20 09:23:23 +00:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
tuntap: Increase the number of queues in tun. Networking under kvm works best if we allocate a per-vCPU RX and TX queue in a virtual NIC. This requires a per-vCPU queue on the host side. It is now safe to increase the maximum number of queues. Preceding patch: 'net: allow large number of rx queues' made sure this won't cause failures due to high order memory allocations. Increase it to 256: this is the max number of vCPUs KVM supports. Size of tun_struct changes from 8512 to 10496 after this patch. This keeps pages allocated for tun_struct before and after the patch to 3. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: David Gibson <dgibson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12 11:41:29 +05:30
tuntap: limit the number of flow caches We create new flow caches when a new flow is identified by tuntap, This may lead some issues: - userspace may produce a huge amount of short live flows to exhaust host memory - the unlimited number of flow caches may produce a long list which increase the time in the linear searching Solve this by introducing a limit of total number of flow caches. Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23 03:59:13 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: spelling fixes Fix spelling errors in tun driver. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 20:42:58 -08:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
vtun: fix typos. This patch fixes four typos in drivers/net/vtun.c. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-25 22:07:40 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
vtun: fix typos. This patch fixes four typos in drivers/net/vtun.c. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-25 22:07:40 +00:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: Add ability to create tun device with given index Tun devices cannot be created with ifidex user wants, but it's required by checkpoint-restore project. Long time ago such ability was implemented for rtnl_ops-based interface for creating links (9c7dafbf net: Allow to create links with given ifindex), but the only API for creating and managing tuntap devices is ioctl-based and is evolving with adding new ones (cde8b15f tuntap: add ioctl to attach or detach a file form tuntap device). Following that trend, here's how a new ioctl that sets the ifindex for device, that _will_ be created by TUNSETIFF ioctl looks like. So those who want a tuntap device with the ifindex N, should open the tun device, call ioctl(fd, TUNSETIFINDEX, &N), then call TUNSETIFF. If the index N is busy, then the register_netdev will find this out and the ioctl would be failed with -EBUSY. If setifindex is not called, then it will be generated as before. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:31:38 +04:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tun: Add support for RFS on tun flows This patch adds support so that the rps_flow_tables (RFS) can be programmed using the tun flows which are already set up to track flows for the purposes of queue selection. On the receive path (corresponding to select_queue and tun_net_xmit) the rxhash is saved in the flow_entry. The original code only does flow lookup in select_queue, so this patch adds a flow lookup in tun_net_xmit if num_queues == 1 (select_queue is not called from dev_queue_xmit->netdev_pick_tx in that case). The flow is recorded (processing CPU) in tun_flow_update (TX path), and reset when flow is deleted. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22 18:54:32 +08:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
vtun: fix typos. This patch fixes four typos in drivers/net/vtun.c. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-25 22:07:40 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
net: make struct tun_struct private to tun.c There's no reason for this to be in the header, and it just hurts recompile time. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyanskiy <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:48:58 -07:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
userns: Convert tun/tap to use kuid and kgid where appropriate Cc: Maxim Krasnyansky <maxk@qualcomm.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-02-07 16:48:55 -08:00
net: make struct tun_struct private to tun.c There's no reason for this to be in the header, and it just hurts recompile time. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyanskiy <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:48:58 -07:00
net: introduce and use netdev_features_t for device features sets v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-15 15:29:55 +00:00
net: tun: convert to hw_features This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 06:13:10 +00:00
tun/tap: Remove references to NETIF_F_UFO. It is going away. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03 06:35:32 -07:00
tun: add ioctl to modify vnet header size virtio added mergeable buffers mode where 2 bytes of extra info is put after vnet header but before actual data (tun does not need this data). In hindsight, it would have been better to add the new info *before* the packet: as it is, users need a lot of tricky code to skip the extra 2 bytes in the middle of the iovec, and in fact applications seem to get it wrong, and only work with specific iovec layout. The fact we might need to split iovec also means we might in theory overflow iovec max size. This patch adds a simpler way for applications to handle this, and future proofs the interface against further extensions, by making the size of the virtio net header configurable from userspace. As a result, tun driver will simply skip the extra 2 bytes on both input and output. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David S. Miller <davem@davemloft.net>
2010-03-17 17:45:01 +02:00
net/tun: implement ndo_set_rx_headroom ndo_set_rx_headroom controls the align value used by tun devices to allocate skbs on frame reception. When the xmit device adds a large encapsulation, this avoids an skb head reallocation on forwarding. The measured improvement when forwarding towards a vxlan dev with frame size below the egress device MTU is as follow: vxlan over ipv6, bridged: +6% vxlan over ipv6, ovs: +7% In case of ipv4 tunnels there is no improvement, since the tun device default alignment provides enough headroom to avoid the skb head reallocation. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26 10:45:40 +01:00
tun: add ioctl to modify vnet header size virtio added mergeable buffers mode where 2 bytes of extra info is put after vnet header but before actual data (tun does not need this data). In hindsight, it would have been better to add the new info *before* the packet: as it is, users need a lot of tricky code to skip the extra 2 bytes in the middle of the iovec, and in fact applications seem to get it wrong, and only work with specific iovec layout. The fact we might need to split iovec also means we might in theory overflow iovec max size. This patch adds a simpler way for applications to handle this, and future proofs the interface against further extensions, by making the size of the virtio net header configurable from userspace. As a result, tun driver will simply skip the extra 2 bytes on both input and output. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David S. Miller <davem@davemloft.net>
2010-03-17 17:45:01 +02:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
net: make struct tun_struct private to tun.c There's no reason for this to be in the header, and it just hurts recompile time. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyanskiy <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:48:58 -07:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tun: fix LSM/SELinux labeling of tun/tap devices This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@parisplace.org> Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14 07:12:19 +00:00
tuntap: limit the number of flow caches We create new flow caches when a new flow is identified by tuntap, This may lead some issues: - userspace may produce a huge amount of short live flows to exhaust host memory - the unlimited number of flow caches may produce a long list which increase the time in the linear searching Solve this by introducing a limit of total number of flow caches. Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23 03:59:13 +00:00
tun: rx batching We can only process 1 packet at one time during sendmsg(). This often lead bad cache utilization under heavy load. So this patch tries to do some batching during rx before submitting them to host network stack. This is done through accepting MSG_MORE as a hint from sendmsg() caller, if it was set, batch the packet temporarily in a linked list and submit them all once MSG_MORE were cleared. Tests were done by pktgen (burst=128) in guest over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% User were allowed to change per device batched packets through ethtool -C rx-frames. NAPI_POLL_WEIGHT were used as upper limitation to prevent bh from being disabled too long. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 15:02:03 +08:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
net: make struct tun_struct private to tun.c There's no reason for this to be in the header, and it just hurts recompile time. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyanskiy <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:48:58 -07:00
macvtap/tun: cross-endian support for little-endian hosts The VNET_LE flag was introduced to fix accesses to virtio 1.0 headers that are always little-endian. It can also be used to handle the special case of a legacy little-endian device implemented by a big-endian host. Let's add a flag and ioctls for big-endian devices as well. If both flags are set, little-endian wins. Since this is isn't a common usecase, the feature is controlled by a kernel config option (not set by default). Both macvtap and tun are covered by this patch since they share the same API with userland. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2015-04-24 14:50:36 +02:00
tun: add tun_is_little_endian() helper Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2015-04-24 14:24:38 +02:00
virtio: add explicit big-endian support to memory accessors The current memory accessors logic is: - little endian if little_endian - native endian (i.e. no byteswap) if !little_endian If we want to fully support cross-endian vhost, we also need to be able to convert to big endian. Instead of changing the little_endian argument to some 3-value enum, this patch changes the logic to: - little endian if little_endian - big endian if !little_endian The native endian case is handled by all users with a trivial helper. This patch doesn't change any functionality, nor it does add overhead. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2015-04-24 14:26:24 +02:00
macvtap/tun: cross-endian support for little-endian hosts The VNET_LE flag was introduced to fix accesses to virtio 1.0 headers that are always little-endian. It can also be used to handle the special case of a legacy little-endian device implemented by a big-endian host. Let's add a flag and ioctls for big-endian devices as well. If both flags are set, little-endian wins. Since this is isn't a common usecase, the feature is controlled by a kernel config option (not set by default). Both macvtap and tun are covered by this patch since they share the same API with userland. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2015-04-24 14:50:36 +02:00
tun: add tun_is_little_endian() helper Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2015-04-24 14:24:38 +02:00
tun: TUN_VNET_LE support, fix sparse warnings for virtio headers Pretty straight-forward: convert all fields to/from virtio endian-ness. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2014-10-23 22:59:31 +03:00
tun: add tun_is_little_endian() helper Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2015-04-24 14:24:38 +02:00
tun: TUN_VNET_LE support, fix sparse warnings for virtio headers Pretty straight-forward: convert all fields to/from virtio endian-ness. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2014-10-23 22:59:31 +03:00
tun: add tun_is_little_endian() helper Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2015-04-24 14:24:38 +02:00
tun: TUN_VNET_LE support, fix sparse warnings for virtio headers Pretty straight-forward: convert all fields to/from virtio endian-ness. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2014-10-23 22:59:31 +03:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: dont use a private kmem_cache Commit 96442e42429 (tuntap: choose the txq based on rxq) added a per tun_struct kmem_cache. As soon as several tun_struct are used, we get an error because two caches cannot have same name. Use the default kmalloc()/kfree_rcu(), as it reduce code size and doesn't have performance impact here. Reported-by: Paul Moore <pmoore@redhat.com> Tested-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-21 07:17:21 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tun: Add support for RFS on tun flows This patch adds support so that the rps_flow_tables (RFS) can be programmed using the tun flows which are already set up to track flows for the purposes of queue selection. On the receive path (corresponding to select_queue and tun_net_xmit) the rxhash is saved in the flow_entry. The original code only does flow lookup in select_queue, so this patch adds a flow lookup in tun_net_xmit if num_queues == 1 (select_queue is not called from dev_queue_xmit->netdev_pick_tx in that case). The flow is recorded (processing CPU) in tun_flow_update (TX path), and reset when flow is deleted. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22 18:54:32 +08:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: limit the number of flow caches We create new flow caches when a new flow is identified by tuntap, This may lead some issues: - userspace may produce a huge amount of short live flows to exhaust host memory - the unlimited number of flow caches may produce a long list which increase the time in the linear searching Solve this by introducing a limit of total number of flow caches. Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23 03:59:13 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: dont use a private kmem_cache Commit 96442e42429 (tuntap: choose the txq based on rxq) added a per tun_struct kmem_cache. As soon as several tun_struct are used, we get an error because two caches cannot have same name. Use the default kmalloc()/kfree_rcu(), as it reduce code size and doesn't have performance impact here. Reported-by: Paul Moore <pmoore@redhat.com> Tested-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-21 07:17:21 +00:00
tuntap: limit the number of flow caches We create new flow caches when a new flow is identified by tuntap, This may lead some issues: - userspace may produce a huge amount of short live flows to exhaust host memory - the unlimited number of flow caches may produce a long list which increase the time in the linear searching Solve this by introducing a limit of total number of flow caches. Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23 03:59:13 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: dont use skb after netif_rx_ni(skb) On Wed, 2012-12-12 at 23:16 -0500, Dave Jones wrote: > Since todays net merge, I see this when I start openvpn.. > > general protection fault: 0000 [#1] PREEMPT SMP > Modules linked in: ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack nf_conntrack ip6table_filter ip6_tables xfs iTCO_wdt iTCO_vendor_support snd_emu10k1 snd_util_mem snd_ac97_codec coretemp ac97_bus microcode snd_hwdep snd_seq pcspkr snd_pcm snd_page_alloc snd_timer lpc_ich i2c_i801 snd_rawmidi mfd_core snd_seq_device snd e1000e soundcore emu10k1_gp gameport i82975x_edac edac_core vhost_net tun macvtap macvlan kvm_intel kvm binfmt_misc nfsd auth_rpcgss nfs_acl lockd sunrpc btrfs libcrc32c zlib_deflate firewire_ohci sata_sil firewire_core crc_itu_t radeon i2c_algo_bit drm_kms_helper ttm drm i2c_core floppy > CPU 0 > Pid: 1381, comm: openvpn Not tainted 3.7.0+ #14 /D975XBX > RIP: 0010:[<ffffffff815b54a4>] [<ffffffff815b54a4>] skb_flow_dissect+0x314/0x3e0 > RSP: 0018:ffff88007d0d9c48 EFLAGS: 00010206 > RAX: 000000000000055d RBX: 6b6b6b6b6b6b6b4b RCX: 1471030a0180040a > RDX: 0000000000000005 RSI: 00000000ffffffe0 RDI: ffff8800ba83fa80 > RBP: ffff88007d0d9cb8 R08: 0000000000000000 R09: 0000000000000000 > R10: 0000000000000000 R11: 0000000000000101 R12: ffff8800ba83fa80 > R13: 0000000000000008 R14: ffff88007d0d9cc8 R15: ffff8800ba83fa80 > FS: 00007f6637104800(0000) GS:ffff8800bf600000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00007f563f5b01c4 CR3: 000000007d140000 CR4: 00000000000007f0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process openvpn (pid: 1381, threadinfo ffff88007d0d8000, task ffff8800a540cd60) > Stack: > ffff8800ba83fa80 0000000000000296 0000000000000000 0000000000000000 > ffff88007d0d9cc8 ffffffff815bcff4 ffff88007d0d9ce8 ffffffff815b1831 > ffff88007d0d9ca8 00000000703f6364 ffff8800ba83fa80 0000000000000000 > Call Trace: > [<ffffffff815bcff4>] ? netif_rx+0x114/0x4c0 > [<ffffffff815b1831>] ? skb_copy_datagram_from_iovec+0x61/0x290 > [<ffffffff815b672a>] __skb_get_rxhash+0x1a/0xd0 > [<ffffffffa03b9538>] tun_get_user+0x418/0x810 [tun] > [<ffffffff8135f468>] ? delay_tsc+0x98/0xf0 > [<ffffffff8109605c>] ? __rcu_read_unlock+0x5c/0xa0 > [<ffffffffa03b9a41>] tun_chr_aio_write+0x81/0xb0 [tun] > [<ffffffff81145011>] ? __buffer_unlock_commit+0x41/0x50 > [<ffffffff811db917>] do_sync_write+0xa7/0xe0 > [<ffffffff811dc01f>] vfs_write+0xaf/0x190 > [<ffffffff811dc375>] sys_write+0x55/0xa0 > [<ffffffff81705540>] tracesys+0xdd/0xe2 > Code: 41 8b 44 24 68 41 2b 44 24 6c 01 de 29 f0 83 f8 03 0f 8e a0 00 00 00 48 63 de 49 03 9c 24 e0 00 00 00 48 85 db 0f 84 72 fe ff ff <8b> 03 41 89 46 08 b8 01 00 00 00 e9 43 fd ff ff 0f 1f 40 00 48 > RIP [<ffffffff815b54a4>] skb_flow_dissect+0x314/0x3e0 > RSP <ffff88007d0d9c48> > ---[ end trace 6d42c834c72c002e ]--- > > > Faulting instruction is > > 0: 8b 03 mov (%rbx),%eax > > rbx is slab poison (-20) so this looks like a use-after-free here... > > flow->ports = *ports; > 314: 8b 03 mov (%rbx),%eax > 316: 41 89 46 08 mov %eax,0x8(%r14) > > in the inlined skb_header_pointer in skb_flow_dissect > > Dave > commit 96442e4242 (tuntap: choose the txq based on rxq) added a use after free. Cache rxhash in a temp variable before calling netif_rx_ni() Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-12 19:22:57 +00:00
tuntap: allow polling/writing/reading when detached We forbid polling, writing and reading when the file were detached, this may complex the user in several cases: - when guest pass some buffers to vhost/qemu and then disable some queues, host/qemu needs to do its own cleanup on those buffers which is complex sometimes. We can do this simply by allowing a user can still write to an disabled queue. Write to an disabled queue will cause the packet pass to the kernel and read will get nothing. - align the polling behavior with macvtap which never fails when the queue is created. This can simplify the polling errors handling of its user (e.g vhost) We can simply achieve this by don't assign NULL to tfile->tun when detached. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 01:05:19 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: allow polling/writing/reading when detached We forbid polling, writing and reading when the file were detached, this may complex the user in several cases: - when guest pass some buffers to vhost/qemu and then disable some queues, host/qemu needs to do its own cleanup on those buffers which is complex sometimes. We can do this simply by allowing a user can still write to an disabled queue. Write to an disabled queue will cause the packet pass to the kernel and read will get nothing. - align the polling behavior with macvtap which never fails when the queue is created. This can simplify the polling errors handling of its user (e.g vhost) We can simply achieve this by don't assign NULL to tfile->tun when detached. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 01:05:19 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: allow polling/writing/reading when detached We forbid polling, writing and reading when the file were detached, this may complex the user in several cases: - when guest pass some buffers to vhost/qemu and then disable some queues, host/qemu needs to do its own cleanup on those buffers which is complex sometimes. We can do this simply by allowing a user can still write to an disabled queue. Write to an disabled queue will cause the packet pass to the kernel and read will get nothing. - align the polling behavior with macvtap which never fails when the queue is created. This can simplify the polling errors handling of its user (e.g vhost) We can simply achieve this by don't assign NULL to tfile->tun when detached. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 01:05:19 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tun: Add support for RFS on tun flows This patch adds support so that the rps_flow_tables (RFS) can be programmed using the tun flows which are already set up to track flows for the purposes of queue selection. On the receive path (corresponding to select_queue and tun_net_xmit) the rxhash is saved in the flow_entry. The original code only does flow lookup in select_queue, so this patch adds a flow lookup in tun_net_xmit if num_queues == 1 (select_queue is not called from dev_queue_xmit->netdev_pick_tx in that case). The flow is recorded (processing CPU) in tun_flow_update (TX path), and reset when flow is deleted. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22 18:54:32 +08:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: limit the number of flow caches We create new flow caches when a new flow is identified by tuntap, This may lead some issues: - userspace may produce a huge amount of short live flows to exhaust host memory - the unlimited number of flow caches may produce a long list which increase the time in the linear searching Solve this by introducing a limit of total number of flow caches. Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23 03:59:13 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tun: Add support for RFS on tun flows This patch adds support so that the rps_flow_tables (RFS) can be programmed using the tun flows which are already set up to track flows for the purposes of queue selection. On the receive path (corresponding to select_queue and tun_net_xmit) the rxhash is saved in the flow_entry. The original code only does flow lookup in select_queue, so this patch adds a flow lookup in tun_net_xmit if num_queues == 1 (select_queue is not called from dev_queue_xmit->netdev_pick_tx in that case). The flow is recorded (processing CPU) in tun_flow_update (TX path), and reset when flow is deleted. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22 18:54:32 +08:00
net: rfs: add hash collision detection Receive Flow Steering is a nice solution but suffers from hash collisions when a mix of connected and unconnected traffic is received on the host, when flow hash table is populated. Also, clearing flow in inet_release() makes RFS not very good for short lived flows, as many packets can follow close(). (FIN , ACK packets, ...) This patch extends the information stored into global hash table to not only include cpu number, but upper part of the hash value. I use a 32bit value, and dynamically split it in two parts. For host with less than 64 possible cpus, this gives 6 bits for the cpu number, and 26 (32-6) bits for the upper part of the hash. Since hash bucket selection use low order bits of the hash, we have a full hash match, if /proc/sys/net/core/rps_sock_flow_entries is big enough. If the hash found in flow table does not match, we fallback to RPS (if it is enabled for the rxqueue). This means that a packet for an non connected flow can avoid the IPI through a unrelated/victim CPU. This also means we no longer have to clear the table at socket close time, and this helps short lived flows performance. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06 12:59:01 -08:00
tun: Add support for RFS on tun flows This patch adds support so that the rps_flow_tables (RFS) can be programmed using the tun flows which are already set up to track flows for the purposes of queue selection. On the receive path (corresponding to select_queue and tun_net_xmit) the rxhash is saved in the flow_entry. The original code only does flow lookup in select_queue, so this patch adds a flow lookup in tun_net_xmit if num_queues == 1 (select_queue is not called from dev_queue_xmit->netdev_pick_tx in that case). The flow is recorded (processing CPU) in tun_flow_update (TX path), and reset when flow is deleted. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22 18:54:32 +08:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: spelling fixes Fix spelling errors in tun driver. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 20:42:58 -08:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
net: core: explicitly select a txq before doing l2 forwarding Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10 16:18:26 +08:00
netdevice: add queue selection fallback handler for ndo_select_queue Add a new argument for ndo_select_queue() callback that passes a fallback handler. This gets invoked through netdev_pick_tx(); fallback handler is currently __netdev_pick_tx() as most drivers invoke this function within their customized implementation in case for skbs that don't need any special handling. This fallback handler can then be replaced on other call-sites with different queue selection methods (e.g. in packet sockets, pktgen etc). This also has the nice side-effect that __netdev_pick_tx() is then only invoked from netdev_pick_tx() and export of that function to modules can be undone. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 15:55:20 +01:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: fix a possible race between queue selection and changing queues Complier may generate codes that re-read the tun->numqueues during tun_select_queue(). This may be a race if vlan->numqueues were changed in the same time and can lead unexpected result (e.g. very huge value). We need prevent the compiler from generating such codes by adding an ACCESS_ONCE() to make sure tun->numqueues were only read once. Bug were introduced by commit c8d68e6be1c3b242f1c598595830890b65cea64a (tuntap: multiqueue support). Reported-by: Michael S. Tsirkin <mst@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05 16:44:57 +08:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: use symmetric hash Tun actually expects a symmetric hash for queue selecting to work correctly, otherwise packets belongs to a single flow may be redirected to the wrong queue. So this patch switch to use __skb_get_hash_symmetric(). Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06 14:09:49 +08:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tun: Add support for RFS on tun flows This patch adds support so that the rps_flow_tables (RFS) can be programmed using the tun flows which are already set up to track flows for the purposes of queue selection. On the receive path (corresponding to select_queue and tun_net_xmit) the rxhash is saved in the flow_entry. The original code only does flow lookup in select_queue, so this patch adds a flow lookup in tun_net_xmit if num_queues == 1 (select_queue is not called from dev_queue_xmit->netdev_pick_tx in that case). The flow is recorded (processing CPU) in tun_flow_update (TX path), and reset when flow is deleted. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22 18:54:32 +08:00
tun, rfs: fix the incorrect hash value The code incorrectly save the queue index as the hash, so this patch is fixing it with the hash received in the stack receive path. Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02 13:24:28 +08:00
tun: Add support for RFS on tun flows This patch adds support so that the rps_flow_tables (RFS) can be programmed using the tun flows which are already set up to track flows for the purposes of queue selection. On the receive path (corresponding to select_queue and tun_net_xmit) the rxhash is saved in the flow_entry. The original code only does flow lookup in select_queue, so this patch adds a flow lookup in tun_net_xmit if num_queues == 1 (select_queue is not called from dev_queue_xmit->netdev_pick_tx in that case). The flow is recorded (processing CPU) in tun_flow_update (TX path), and reset when flow is deleted. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22 18:54:32 +08:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: add ioctl to attach or detach a file form tuntap device Sometimes usespace may need to active/deactive a queue, this could be done by detaching and attaching a file from tuntap device. This patch introduces a new ioctls - TUNSETQUEUE which could be used to do this. Flag IFF_ATTACH_QUEUE were introduced to do attaching while IFF_DETACH_QUEUE were introduced to do the detaching. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:01 +00:00
net: Allow userns root to control tun and tap devices Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) calls to ns_capable(net->user_ns,CAP_NET_ADMIN) calls. Allow setting of the tun iff flags. Allow creating of tun devices. Allow adding a new queue to a tun device. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 21:34:11 +00:00
tuntap: add ioctl to attach or detach a file form tuntap device Sometimes usespace may need to active/deactive a queue, this could be done by detaching and attaching a file from tuntap device. This patch introduces a new ioctls - TUNSETQUEUE which could be used to do this. Flag IFF_ATTACH_QUEUE were introduced to do attaching while IFF_DETACH_QUEUE were introduced to do the detaching. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:01 +00:00
net: Allow userns root to control tun and tap devices Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) calls to ns_capable(net->user_ns,CAP_NET_ADMIN) calls. Allow setting of the tun iff flags. Allow creating of tun devices. Allow adding a new queue to a tun device. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 21:34:11 +00:00
tuntap: add ioctl to attach or detach a file form tuntap device Sometimes usespace may need to active/deactive a queue, this could be done by detaching and attaching a file from tuntap device. This patch introduces a new ioctls - TUNSETQUEUE which could be used to do this. Flag IFF_ATTACH_QUEUE were introduced to do attaching while IFF_DETACH_QUEUE were introduced to do the detaching. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:01 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tuntap: fix sparse warning Make tun_enable_queue() static to fix the sparse warning: drivers/net/tun.c:399:19: sparse: symbol 'tun_enable_queue' was not declared. Should it be static? Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-18 11:00:27 +08:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tuntap: purge socket error queue on detach Commit eda297729171fe16bf34fe5b0419dfb69060f623 (tun: Support software transmit time stamping) will queue skbs into error queue when tx stamping is enabled. But it forgets to purge the error queue during detach. This patch fixes this. Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 17:53:59 +08:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun: rx batching We can only process 1 packet at one time during sendmsg(). This often lead bad cache utilization under heavy load. So this patch tries to do some batching during rx before submitting them to host network stack. This is done through accepting MSG_MORE as a hint from sendmsg() caller, if it was set, batch the packet temporarily in a linked list and submit them all once MSG_MORE were cleared. Tests were done by pktgen (burst=128) in guest over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% User were allowed to change per device batched packets through ethtool -C rx-frames. NAPI_POLL_WEIGHT were used as upper limitation to prevent bh from being disabled too long. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 15:02:03 +08:00
tuntap: purge socket error queue on detach Commit eda297729171fe16bf34fe5b0419dfb69060f623 (tun: Support software transmit time stamping) will queue skbs into error queue when tx stamping is enabled. But it forgets to purge the error queue during detach. This patch fixes this. Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 17:53:59 +08:00
tun: fix a memory leak for tfile->tx_array [ Upstream commit 4df0bfc79904b7169dc77dcce44598b1545721f9 ] tfile->tun could be detached before we close the tun fd, via tun_detach_all(), so it should not be used to check for tfile->tx_array. As Jason suggested, we probably have to clean it up unconditionally both in __tun_deatch() and tun_detach_all(), but this requires to check if it is initialized or not. Currently skb_array_cleanup() doesn't have such a check, so I check it in the caller and introduce a helper function, it is a bit ugly but we can always improve it in net-next. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 1576d9860599 ("tun: switch to use skb array for tx") Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-15 11:37:29 -08:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: switch to use rtnl_dereference() Switch to use rtnl_dereference() instead of the open code, suggested by Eric. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:32 +00:00
tuntap: allow polling/writing/reading when detached We forbid polling, writing and reading when the file were detached, this may complex the user in several cases: - when guest pass some buffers to vhost/qemu and then disable some queues, host/qemu needs to do its own cleanup on those buffers which is complex sometimes. We can do this simply by allowing a user can still write to an disabled queue. Write to an disabled queue will cause the packet pass to the kernel and read will get nothing. - align the polling behavior with macvtap which never fails when the queue is created. This can simplify the polling errors handling of its user (e.g vhost) We can simply achieve this by don't assign NULL to tfile->tun when detached. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 01:05:19 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: switch to use rtnl_dereference() Switch to use rtnl_dereference() instead of the open code, suggested by Eric. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:32 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: allow polling/writing/reading when detached We forbid polling, writing and reading when the file were detached, this may complex the user in several cases: - when guest pass some buffers to vhost/qemu and then disable some queues, host/qemu needs to do its own cleanup on those buffers which is complex sometimes. We can do this simply by allowing a user can still write to an disabled queue. Write to an disabled queue will cause the packet pass to the kernel and read will get nothing. - align the polling behavior with macvtap which never fails when the queue is created. This can simplify the polling errors handling of its user (e.g vhost) We can simply achieve this by don't assign NULL to tfile->tun when detached. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 01:05:19 +00:00
drivers/net: Use RCU_INIT_POINTER(x, NULL) in tun.c This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24 00:02:32 +05:30
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tuntap: allow polling/writing/reading when detached We forbid polling, writing and reading when the file were detached, this may complex the user in several cases: - when guest pass some buffers to vhost/qemu and then disable some queues, host/qemu needs to do its own cleanup on those buffers which is complex sometimes. We can do this simply by allowing a user can still write to an disabled queue. Write to an disabled queue will cause the packet pass to the kernel and read will get nothing. - align the polling behavior with macvtap which never fails when the queue is created. This can simplify the polling errors handling of its user (e.g vhost) We can simply achieve this by don't assign NULL to tfile->tun when detached. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 01:05:19 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: purge socket error queue on detach Commit eda297729171fe16bf34fe5b0419dfb69060f623 (tun: Support software transmit time stamping) will queue skbs into error queue when tx stamping is enabled. But it forgets to purge the error queue during detach. This patch fixes this. Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 17:53:59 +08:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: fix leaking reference count Reference count leaking of both module and sock were found: - When a detached file were closed, its sock refcnt from device were not released, solving this by add the sock_put(). - The module were hold or drop unconditionally in TUNSETPERSIST, which means we if we set the persist flag for N times, we need unset it for another N times. Solving this by only hold or drop an reference when there's a flag change and also drop the reference count when the persist device is deleted. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:34 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tuntap: fix leaking reference count Reference count leaking of both module and sock were found: - When a detached file were closed, its sock refcnt from device were not released, solving this by add the sock_put(). - The module were hold or drop unconditionally in TUNSETPERSIST, which means we if we set the persist flag for N times, we need unset it for another N times. Solving this by only hold or drop an reference when there's a flag change and also drop the reference count when the persist device is deleted. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:34 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: fix carrier on/off status Commit c8d68e6be1c3b242f1c598595830890b65cea64a removed carrier off call from tun_detach since it's now called on queue disable and not only on tun close. This confuses userspace which used this flag to detect a free tun. To fix, put this back but under if (clean). Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 00:38:02 +00:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: fix carrier on/off status Commit c8d68e6be1c3b242f1c598595830890b65cea64a removed carrier off call from tun_detach since it's now called on queue disable and not only on tun close. This confuses userspace which used this flag to detect a free tun. To fix, put this back but under if (clean). Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 00:38:02 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tun: fix carrier on/off status Commit c8d68e6be1c3b242f1c598595830890b65cea64a removed carrier off call from tun_detach since it's now called on queue disable and not only on tun close. This confuses userspace which used this flag to detect a free tun. To fix, put this back but under if (clean). Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 00:38:02 +00:00
tun: fix a memory leak for tfile->tx_array [ Upstream commit 4df0bfc79904b7169dc77dcce44598b1545721f9 ] tfile->tun could be detached before we close the tun fd, via tun_detach_all(), so it should not be used to check for tfile->tx_array. As Jason suggested, we probably have to clean it up unconditionally both in __tun_deatch() and tun_detach_all(), but this requires to check if it is initialized or not. Currently skb_array_cleanup() doesn't have such a check, so I check it in the caller and introduce a helper function, it is a bit ugly but we can always improve it in net-next. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 1576d9860599 ("tun: switch to use skb array for tx") Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-15 11:37:29 -08:00
tun: Utilize the normal socket network namespace refcounting. There is no need for tun to do the weird network namespace refcounting. The existing network namespace refcounting in tfile has almost exactly the same lifetime. So rewrite the code to use the struct sock network namespace refcounting and remove the unnecessary hand rolled network namespace refcounting and the unncesary tfile->net. This change allows the tun code to directly call sock_put bypassing sock_release and making SOCK_EXTERNALLY_ALLOCATED unnecessary. Remove the now unncessary tun_release so that if anything tries to use the sock_release code path the kernel will oops, and let us know about the bug. The macvtap code already uses it's internal socket this way. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-08 21:07:08 -05:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: switch to use rtnl_dereference() Switch to use rtnl_dereference() instead of the open code, suggested by Eric. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:32 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: correctly wake up process during uninit We used to check dev->reg_state against NETREG_REGISTERED after each time we are woke up. But after commit 9e641bdcfa4e ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency"), it uses skb_recv_datagram() which does not check dev->reg_state. This will result if we delete a tun/tap device after a process is blocked in the reading. The device will wait for the reference count which was held by that process for ever. Fixes this by using RCV_SHUTDOWN which will be checked during sk_recv_datagram() before trying to wake up the process during uninit. Fixes: 9e641bdcfa4e ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency") Cc: Eric Dumazet <edumazet@google.com> Cc: Xi Wang <xii@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-19 13:36:51 +08:00
net-tun: restructure tun_do_read for better sleep/wakeup efficiency tun_do_read always adds current thread to wait queue, even if a packet is ready to read. This is inefficient because both sleeper and waker want to acquire the wait queue spin lock when packet rate is high. We restructure the read function and use common kernel networking routines to handle receive, sleep and wakeup. With the change available packets are checked first before the reading thread is added to the wait queue. Ran performance tests with the following configuration: - my packet generator -> tap1 -> br0 -> tap0 -> my packet consumer - sender pinned to one core and receiver pinned to another core - sender send small UDP packets (64 bytes total) as fast as it can - sandy bridge cores - throughput are receiver side goodput numbers The results are baseline: 731k pkts/sec, cpu utilization at 1.50 cpus changed: 783k pkts/sec, cpu utilization at 1.53 cpus The performance difference is largely determined by packet rate and inter-cpu communication cost. For example, if the sender and receiver are pinned to different cpu sockets, the results are baseline: 558k pkts/sec, cpu utilization at 1.71 cpus changed: 690k pkts/sec, cpu utilization at 1.67 cpus Co-authored-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xi Wang <xii@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 15:11:48 -07:00
drivers/net: Use RCU_INIT_POINTER(x, NULL) in tun.c This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24 00:02:32 +05:30
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: allow polling/writing/reading when detached We forbid polling, writing and reading when the file were detached, this may complex the user in several cases: - when guest pass some buffers to vhost/qemu and then disable some queues, host/qemu needs to do its own cleanup on those buffers which is complex sometimes. We can do this simply by allowing a user can still write to an disabled queue. Write to an disabled queue will cause the packet pass to the kernel and read will get nothing. - align the polling behavior with macvtap which never fails when the queue is created. This can simplify the polling errors handling of its user (e.g vhost) We can simply achieve this by don't assign NULL to tfile->tun when detached. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 01:05:19 +00:00
tuntap: correctly wake up process during uninit We used to check dev->reg_state against NETREG_REGISTERED after each time we are woke up. But after commit 9e641bdcfa4e ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency"), it uses skb_recv_datagram() which does not check dev->reg_state. This will result if we delete a tun/tap device after a process is blocked in the reading. The device will wait for the reference count which was held by that process for ever. Fixes this by using RCV_SHUTDOWN which will be checked during sk_recv_datagram() before trying to wake up the process during uninit. Fixes: 9e641bdcfa4e ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency") Cc: Eric Dumazet <edumazet@google.com> Cc: Xi Wang <xii@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-19 13:36:51 +08:00
net-tun: restructure tun_do_read for better sleep/wakeup efficiency tun_do_read always adds current thread to wait queue, even if a packet is ready to read. This is inefficient because both sleeper and waker want to acquire the wait queue spin lock when packet rate is high. We restructure the read function and use common kernel networking routines to handle receive, sleep and wakeup. With the change available packets are checked first before the reading thread is added to the wait queue. Ran performance tests with the following configuration: - my packet generator -> tap1 -> br0 -> tap0 -> my packet consumer - sender pinned to one core and receiver pinned to another core - sender send small UDP packets (64 bytes total) as fast as it can - sandy bridge cores - throughput are receiver side goodput numbers The results are baseline: 731k pkts/sec, cpu utilization at 1.50 cpus changed: 783k pkts/sec, cpu utilization at 1.53 cpus The performance difference is largely determined by packet rate and inter-cpu communication cost. For example, if the sender and receiver are pinned to different cpu sockets, the results are baseline: 558k pkts/sec, cpu utilization at 1.71 cpus changed: 690k pkts/sec, cpu utilization at 1.67 cpus Co-authored-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xi Wang <xii@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 15:11:48 -07:00
drivers/net: Use RCU_INIT_POINTER(x, NULL) in tun.c This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24 00:02:32 +05:30
tuntap: allow polling/writing/reading when detached We forbid polling, writing and reading when the file were detached, this may complex the user in several cases: - when guest pass some buffers to vhost/qemu and then disable some queues, host/qemu needs to do its own cleanup on those buffers which is complex sometimes. We can do this simply by allowing a user can still write to an disabled queue. Write to an disabled queue will cause the packet pass to the kernel and read will get nothing. - align the polling behavior with macvtap which never fails when the queue is created. This can simplify the polling errors handling of its user (e.g vhost) We can simply achieve this by don't assign NULL to tfile->tun when detached. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 01:05:19 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: switch to use rtnl_dereference() Switch to use rtnl_dereference() instead of the open code, suggested by Eric. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:32 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: purge socket error queue on detach Commit eda297729171fe16bf34fe5b0419dfb69060f623 (tun: Support software transmit time stamping) will queue skbs into error queue when tx stamping is enabled. But it forgets to purge the error queue during detach. This patch fixes this. Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 17:53:59 +08:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: fix a memory leak for tfile->tx_array [ Upstream commit 4df0bfc79904b7169dc77dcce44598b1545721f9 ] tfile->tun could be detached before we close the tun fd, via tun_detach_all(), so it should not be used to check for tfile->tx_array. As Jason suggested, we probably have to clean it up unconditionally both in __tun_deatch() and tun_detach_all(), but this requires to check if it is initialized or not. Currently skb_array_cleanup() doesn't have such a check, so I check it in the caller and introduce a helper function, it is a bit ugly but we can always improve it in net-next. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 1576d9860599 ("tun: switch to use skb array for tx") Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-15 11:37:29 -08:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tuntap: purge socket error queue on detach Commit eda297729171fe16bf34fe5b0419dfb69060f623 (tun: Support software transmit time stamping) will queue skbs into error queue when tx stamping is enabled. But it forgets to purge the error queue during detach. This patch fixes this. Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 17:53:59 +08:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tun: fix a memory leak for tfile->tx_array [ Upstream commit 4df0bfc79904b7169dc77dcce44598b1545721f9 ] tfile->tun could be detached before we close the tun fd, via tun_detach_all(), so it should not be used to check for tfile->tx_array. As Jason suggested, we probably have to clean it up unconditionally both in __tun_deatch() and tun_detach_all(), but this requires to check if it is initialized or not. Currently skb_array_cleanup() doesn't have such a check, so I check it in the caller and introduce a helper function, it is a bit ugly but we can always improve it in net-next. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 1576d9860599 ("tun: switch to use skb array for tx") Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-15 11:37:29 -08:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tuntap: fix leaking reference count Reference count leaking of both module and sock were found: - When a detached file were closed, its sock refcnt from device were not released, solving this by add the sock_put(). - The module were hold or drop unconditionally in TUNSETPERSIST, which means we if we set the persist flag for N times, we need unset it for another N times. Solving this by only hold or drop an reference when there's a flag change and also drop the reference count when the persist device is deleted. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:34 +00:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tuntap: fix leaking reference count Reference count leaking of both module and sock were found: - When a detached file were closed, its sock refcnt from device were not released, solving this by add the sock_put(). - The module were hold or drop unconditionally in TUNSETPERSIST, which means we if we set the persist flag for N times, we need unset it for another N times. Solving this by only hold or drop an reference when there's a flag change and also drop the reference count when the persist device is deleted. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:34 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: Allow to skip filter on attach There's a small problem with sk-filters on tun devices. Consider an application doing this sequence of steps: fd = open("/dev/net/tun"); ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" }); ioctl(fd, TUNATTACHFILTER, &my_filter); ioctl(fd, TUNSETPERSIST, 1); close(fd); At that point the tun0 will remain in the system and will keep in mind that there should be a socket filter at address '&my_filter'. If after that we do fd = open("/dev/net/tun"); ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" }); we most likely receive the -EFAULT error, since tun_attach() would try to connect the filter back. But (!) if we provide a filter at address &my_filter, then tun0 will be created and the "new" filter would be attached, but application may not know about that. This may create certain problems to anyone using tun-s, but it's critical problem for c/r -- if we meet a persistent tun device with a filter in mind, we will not be able to attach to it to dump its state (flags, owner, address, vnethdr size, etc.). The proposal is to allow to attach to tun device (with TUNSETIFF) w/o attaching the filter to the tun-file's socket. After this attach app may e.g clean the device by dropping the filter, it doesn't want to have one, or (in case of c/r) get information about the device with tun ioctls. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:32:21 +04:00
tun: Fix races in tun_set_iff It is possible for two different tasks with access to the same file descriptor to call tun_set_iff on it at the same time and race to attach to a tap device. Prevent this by placing all of the logic to attach to a file descriptor in one function and testing the file descriptor to be certain it is not already attached to another tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 10:57:48 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun: Make tun_net_xmit atomic wrt tun_attach && tun_detach Currently this small race allows for a packet to be received when we detach from an tun device and still be enqueued. Not especially important but not what the code is trying to do. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:02:28 +00:00
tun: Fix races in tun_set_iff It is possible for two different tasks with access to the same file descriptor to call tun_set_iff on it at the same time and race to attach to a tap device. Prevent this by placing all of the logic to attach to a file descriptor in one function and testing the file descriptor to be certain it is not already attached to another tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 10:57:48 +00:00
tun: fix LSM/SELinux labeling of tun/tap devices This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@parisplace.org> Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14 07:12:19 +00:00
tun: Make tun_net_xmit atomic wrt tun_attach && tun_detach Currently this small race allows for a packet to be received when we detach from an tun device and still be enqueued. Not especially important but not what the code is trying to do. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:02:28 +00:00
tuntap: allow polling/writing/reading when detached We forbid polling, writing and reading when the file were detached, this may complex the user in several cases: - when guest pass some buffers to vhost/qemu and then disable some queues, host/qemu needs to do its own cleanup on those buffers which is complex sometimes. We can do this simply by allowing a user can still write to an disabled queue. Write to an disabled queue will cause the packet pass to the kernel and read will get nothing. - align the polling behavior with macvtap which never fails when the queue is created. This can simplify the polling errors handling of its user (e.g vhost) We can simply achieve this by don't assign NULL to tfile->tun when detached. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 01:05:19 +00:00
tun: Make tun_net_xmit atomic wrt tun_attach && tun_detach Currently this small race allows for a packet to be received when we detach from an tun device and still be enqueued. Not especially important but not what the code is trying to do. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:02:28 +00:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tun: Make tun_net_xmit atomic wrt tun_attach && tun_detach Currently this small race allows for a packet to be received when we detach from an tun device and still be enqueued. Not especially important but not what the code is trying to do. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:02:28 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: spelling fixes Fix spelling errors in tun driver. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 20:42:58 -08:00
tun: Allow to skip filter on attach There's a small problem with sk-filters on tun devices. Consider an application doing this sequence of steps: fd = open("/dev/net/tun"); ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" }); ioctl(fd, TUNATTACHFILTER, &my_filter); ioctl(fd, TUNSETPERSIST, 1); close(fd); At that point the tun0 will remain in the system and will keep in mind that there should be a socket filter at address '&my_filter'. If after that we do fd = open("/dev/net/tun"); ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" }); we most likely receive the -EFAULT error, since tun_attach() would try to connect the filter back. But (!) if we provide a filter at address &my_filter, then tun0 will be created and the "new" filter would be attached, but application may not know about that. This may create certain problems to anyone using tun-s, but it's critical problem for c/r -- if we meet a persistent tun device with a filter in mind, we will not be able to attach to it to dump its state (flags, owner, address, vnethdr size, etc.). The proposal is to allow to attach to tun device (with TUNSETIFF) w/o attaching the filter to the tun-file's socket. After this attach app may e.g clean the device by dropping the filter, it doesn't want to have one, or (in case of c/r) get information about the device with tun ioctls. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:32:21 +04:00
tun: use socket locks for sk_{attach,detatch}_filter This reverts commit 5a5abb1fa3b05dd ("tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter") and replaces it to use lock_sock around sk_{attach,detach}_filter. The checks inside filter.c are updated with lockdep_sock_is_held to check for proper socket locks. It keeps the code cleaner by ensuring that only one lock governs the socket filter instead of two independent locks. Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05 17:10:16 +02:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: correctly wake up process during uninit We used to check dev->reg_state against NETREG_REGISTERED after each time we are woke up. But after commit 9e641bdcfa4e ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency"), it uses skb_recv_datagram() which does not check dev->reg_state. This will result if we delete a tun/tap device after a process is blocked in the reading. The device will wait for the reference count which was held by that process for ever. Fixes this by using RCV_SHUTDOWN which will be checked during sk_recv_datagram() before trying to wake up the process during uninit. Fixes: 9e641bdcfa4e ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency") Cc: Eric Dumazet <edumazet@google.com> Cc: Xi Wang <xii@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-19 13:36:51 +08:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: Fix races in tun_set_iff It is possible for two different tasks with access to the same file descriptor to call tun_set_iff on it at the same time and race to attach to a tap device. Prevent this by placing all of the logic to attach to a file descriptor in one function and testing the file descriptor to be certain it is not already attached to another tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 10:57:48 +00:00
tun: Make tun_net_xmit atomic wrt tun_attach && tun_detach Currently this small race allows for a packet to be received when we detach from an tun device and still be enqueued. Not especially important but not what the code is trying to do. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:02:28 +00:00
tun: Fix races in tun_set_iff It is possible for two different tasks with access to the same file descriptor to call tun_set_iff on it at the same time and race to attach to a tap device. Prevent this by placing all of the logic to attach to a file descriptor in one function and testing the file descriptor to be certain it is not already attached to another tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 10:57:48 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
tun: Fix races between tun_net_close and free_netdev. The tun code does not cope gracefully if the network device goes away before the tun file descriptor is closed. It looks like we can trigger this with rmmod, and moving tun devices between network namespaces will allow this to be triggered when network namespaces exit. To fix this I introduce an intermediate data structure tun_file which holds a count of users and a pointer to the struct tun_struct. tun_get increments that reference count if it is greater than 0. tun_put decrements that reference count and detaches from the network device if the count is 0. While we have a file attached to the network device I hold a reference to the network device keeping it from going away completely. When a network device is unregistered I decrement the count of the attached tun_file and if that was the last user I detach the tun_file, and all processes on read_wait are woken up to ensure they do not sleep indefinitely. As some of those sleeps happen with the count on the tun device elevated waking up the read waiters ensures that tun_file will be detached in a timely manner. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:07:17 +00:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
tun: Fix races between tun_net_close and free_netdev. The tun code does not cope gracefully if the network device goes away before the tun file descriptor is closed. It looks like we can trigger this with rmmod, and moving tun devices between network namespaces will allow this to be triggered when network namespaces exit. To fix this I introduce an intermediate data structure tun_file which holds a count of users and a pointer to the struct tun_struct. tun_get increments that reference count if it is greater than 0. tun_put decrements that reference count and detaches from the network device if the count is 0. While we have a file attached to the network device I hold a reference to the network device keeping it from going away completely. When a network device is unregistered I decrement the count of the attached tun_file and if that was the last user I detach the tun_file, and all processes on read_wait are woken up to ensure they do not sleep indefinitely. As some of those sleeps happen with the count on the tun device elevated waking up the read waiters ensures that tun_file will be detached in a timely manner. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:07:17 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
tun: Use memdup_user() rather than duplicating its implementation Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20 08:54:15 +02:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
tun: Fix unicast filter overflow Tap devices can make use of a small MAC filter set via the TUNSETTXFILTER ioctl. The filter has a set of exact matches plus a hash for imperfect filtering of additional multicast addresses. The current code is unbalanced, adding unicast addresses to the multicast hash, but only checking the hash against multicast addresses. This results in the filter dropping unicast addresses that overflow the exact filter. The fix is simply to disable the filter by leaving count set to zero if we find non-multicast addresses after the exact match table is filled. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08 17:49:17 -08:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
tun: Fix unicast filter overflow Tap devices can make use of a small MAC filter set via the TUNSETTXFILTER ioctl. The filter has a set of exact matches plus a hash for imperfect filtering of additional multicast addresses. The current code is unbalanced, adding unicast addresses to the multicast hash, but only checking the hash against multicast addresses. This results in the filter dropping unicast addresses that overflow the exact filter. The fix is simply to disable the filter by leaving count set to zero if we find non-multicast addresses after the exact match table is filled. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08 17:49:17 -08:00
tun: Rename a jump label in update_filter() Adjust a jump target according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20 09:00:34 +02:00
tun: Fix unicast filter overflow Tap devices can make use of a small MAC filter set via the TUNSETTXFILTER ioctl. The filter has a set of exact matches plus a hash for imperfect filtering of additional multicast addresses. The current code is unbalanced, adding unicast addresses to the multicast hash, but only checking the hash against multicast addresses. This results in the filter dropping unicast addresses that overflow the exact filter. The fix is simply to disable the filter by leaving count set to zero if we find non-multicast addresses after the exact match table is filled. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08 17:49:17 -08:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
tun: Fix unicast filter overflow Tap devices can make use of a small MAC filter set via the TUNSETTXFILTER ioctl. The filter has a set of exact matches plus a hash for imperfect filtering of additional multicast addresses. The current code is unbalanced, adding unicast addresses to the multicast hash, but only checking the hash against multicast addresses. This results in the filter dropping unicast addresses that overflow the exact filter. The fix is simply to disable the filter by leaving count set to zero if we find non-multicast addresses after the exact match table is filled. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08 17:49:17 -08:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
tun: Rename a jump label in update_filter() Adjust a jump target according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20 09:00:34 +02:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
drivers/net: Convert compare_ether_addr to ether_addr_equal Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 17:17:46 +00:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: const-ify ethtool_ops declarations Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 14:30:00 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Fix races between tun_net_close and free_netdev. The tun code does not cope gracefully if the network device goes away before the tun file descriptor is closed. It looks like we can trigger this with rmmod, and moving tun devices between network namespaces will allow this to be triggered when network namespaces exit. To fix this I introduce an intermediate data structure tun_file which holds a count of users and a pointer to the struct tun_struct. tun_get increments that reference count if it is greater than 0. tun_put decrements that reference count and detaches from the network device if the count is 0. While we have a file attached to the network device I hold a reference to the network device keeping it from going away completely. When a network device is unregistered I decrement the count of the attached tun_file and if that was the last user I detach the tun_file, and all processes on read_wait are woken up to ensure they do not sleep indefinitely. As some of those sleeps happen with the count on the tun device elevated waking up the read waiters ensures that tun_file will be detached in a timely manner. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:07:17 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: Fix races between tun_net_close and free_netdev. The tun code does not cope gracefully if the network device goes away before the tun file descriptor is closed. It looks like we can trigger this with rmmod, and moving tun devices between network namespaces will allow this to be triggered when network namespaces exit. To fix this I introduce an intermediate data structure tun_file which holds a count of users and a pointer to the struct tun_struct. tun_get increments that reference count if it is greater than 0. tun_put decrements that reference count and detaches from the network device if the count is 0. While we have a file attached to the network device I hold a reference to the network device keeping it from going away completely. When a network device is unregistered I decrement the count of the attached tun_file and if that was the last user I detach the tun_file, and all processes on read_wait are woken up to ensure they do not sleep indefinitely. As some of those sleeps happen with the count on the tun device elevated waking up the read waiters ensures that tun_file will be detached in a timely manner. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:07:17 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: fix premature POLLOUT notification on tun devices aszlig observed failing ssh tunnels (-w) during initialization since commit cc9da6cc4f56e0 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE"). We already had reports that the mentioned commit breaks Juniper VPN connections. I can't clearly say that the Juniper VPN client has the same problem, but it is worth a try to hint to this patch. Because of the early generation of link local addresses, the kernel now can start asking for routers on the local subnet much earlier than usual. Those router solicitation packets arrive inside the ssh channels and should be transmitted to the tun fd before the configuration scripts might have upped the interface and made it ready for transmission. ssh polls on the interface and receives back a POLL_OUT. It tries to send the earily router solicitation packet to the tun interface. Unfortunately it hasn't been up'ed yet by config scripts, thus failing with -EIO. ssh doesn't retry again and considers the tun interface broken forever. Link: https://bugzilla.kernel.org/show_bug.cgi?id=121131 Fixes: cc9da6cc4f56 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE") Cc: Bjørn Mork <bjorn@mork.no> Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Reported-by: Jonas Lippuner <jonas@lippuner.ca> Cc: Jonas Lippuner <jonas@lippuner.ca> Reported-by: aszlig <aszlig@redmoonstudios.org> Cc: aszlig <aszlig@redmoonstudios.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 00:00:26 +01:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: fix premature POLLOUT notification on tun devices aszlig observed failing ssh tunnels (-w) during initialization since commit cc9da6cc4f56e0 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE"). We already had reports that the mentioned commit breaks Juniper VPN connections. I can't clearly say that the Juniper VPN client has the same problem, but it is worth a try to hint to this patch. Because of the early generation of link local addresses, the kernel now can start asking for routers on the local subnet much earlier than usual. Those router solicitation packets arrive inside the ssh channels and should be transmitted to the tun fd before the configuration scripts might have upped the interface and made it ready for transmission. ssh polls on the interface and receives back a POLL_OUT. It tries to send the earily router solicitation packet to the tun interface. Unfortunately it hasn't been up'ed yet by config scripts, thus failing with -EIO. ssh doesn't retry again and considers the tun interface broken forever. Link: https://bugzilla.kernel.org/show_bug.cgi?id=121131 Fixes: cc9da6cc4f56 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE") Cc: Bjørn Mork <bjorn@mork.no> Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Reported-by: Jonas Lippuner <jonas@lippuner.ca> Cc: Jonas Lippuner <jonas@lippuner.ca> Reported-by: aszlig <aszlig@redmoonstudios.org> Cc: aszlig <aszlig@redmoonstudios.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 00:00:26 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
netdev: convert pseudo drivers to netdev_tx_t These are all drivers that don't touch real hardware. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31 19:50:51 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
tuntap: Fix for a race in accessing numqueues A patch for fixing a race between queue selection and changing queues was introduced in commit 92bb73ea2("tuntap: fix a possible race between queue selection and changing queues"). The fix was to prevent the driver from re-reading the tun->numqueues more than once within tun_select_queue() using ACCESS_ONCE(). We have been experiancing 'Divide-by-zero' errors in tun_net_xmit() since we moved from 3.6 to 3.10, and believe that they come from a simular source where the value of tun->numqueues changes to zero between the first and a subsequent read of tun->numqueues. The fix is a simular use of ACCESS_ONCE(), as well as a multiply instead of a divide in the if statement. Signed-off-by: Dominic Curran <dominic.curran@citrix.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Maxim Krasnyansky <maxk@qti.qualcomm.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 03:03:23 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: Fix for a race in accessing numqueues A patch for fixing a race between queue selection and changing queues was introduced in commit 92bb73ea2("tuntap: fix a possible race between queue selection and changing queues"). The fix was to prevent the driver from re-reading the tun->numqueues more than once within tun_select_queue() using ACCESS_ONCE(). We have been experiancing 'Divide-by-zero' errors in tun_net_xmit() since we moved from 3.6 to 3.10, and believe that they come from a simular source where the value of tun->numqueues changes to zero between the first and a subsequent read of tun->numqueues. The fix is a simular use of ACCESS_ONCE(), as well as a multiply instead of a divide in the if statement. Signed-off-by: Dominic Curran <dominic.curran@citrix.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Maxim Krasnyansky <maxk@qti.qualcomm.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 03:03:23 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: Fix for a race in accessing numqueues A patch for fixing a race between queue selection and changing queues was introduced in commit 92bb73ea2("tuntap: fix a possible race between queue selection and changing queues"). The fix was to prevent the driver from re-reading the tun->numqueues more than once within tun_select_queue() using ACCESS_ONCE(). We have been experiancing 'Divide-by-zero' errors in tun_net_xmit() since we moved from 3.6 to 3.10, and believe that they come from a simular source where the value of tun->numqueues changes to zero between the first and a subsequent read of tun->numqueues. The fix is a simular use of ACCESS_ONCE(), as well as a multiply instead of a divide in the if statement. Signed-off-by: Dominic Curran <dominic.curran@citrix.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Maxim Krasnyansky <maxk@qti.qualcomm.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 03:03:23 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: calculate rps hash only when needed There's no need to calculate rps hash if it was not enabled. So this patch export rps_needed and check it before trying to get rps hash. Tests (using pktgen to inject packets to guest) shows this can improve pps about 13% (when rps is disabled). Before: ~1150000 pps After: ~1300000 pps Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> ---- Changes from V1: - Fix build when CONFIG_RPS is not set Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25 23:13:42 -04:00
tun: Add support for RFS on tun flows This patch adds support so that the rps_flow_tables (RFS) can be programmed using the tun flows which are already set up to track flows for the purposes of queue selection. On the receive path (corresponding to select_queue and tun_net_xmit) the rxhash is saved in the flow_entry. The original code only does flow lookup in select_queue, so this patch adds a flow lookup in tun_net_xmit if num_queues == 1 (select_queue is not called from dev_queue_xmit->netdev_pick_tx in that case). The flow is recorded (processing CPU) in tun_flow_update (TX path), and reset when flow is deleted. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22 18:54:32 +08:00
tun: use symmetric hash Tun actually expects a symmetric hash for queue selecting to work correctly, otherwise packets belongs to a single flow may be redirected to the wrong queue. So this patch switch to use __skb_get_hash_symmetric(). Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06 14:09:49 +08:00
tun: Add support for RFS on tun flows This patch adds support so that the rps_flow_tables (RFS) can be programmed using the tun flows which are already set up to track flows for the purposes of queue selection. On the receive path (corresponding to select_queue and tun_net_xmit) the rxhash is saved in the flow_entry. The original code only does flow lookup in select_queue, so this patch adds a flow lookup in tun_net_xmit if num_queues == 1 (select_queue is not called from dev_queue_xmit->netdev_pick_tx in that case). The flow is recorded (processing CPU) in tun_flow_update (TX path), and reset when flow is deleted. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22 18:54:32 +08:00
tuntap: calculate rps hash only when needed There's no need to calculate rps hash if it was not enabled. So this patch export rps_needed and check it before trying to get rps hash. Tests (using pktgen to inject packets to guest) shows this can improve pps about 13% (when rps is disabled). Before: ~1150000 pps After: ~1300000 pps Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> ---- Changes from V1: - Fix build when CONFIG_RPS is not set Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25 23:13:42 -04:00
tun: Add support for RFS on tun flows This patch adds support so that the rps_flow_tables (RFS) can be programmed using the tun flows which are already set up to track flows for the purposes of queue selection. On the receive path (corresponding to select_queue and tun_net_xmit) the rxhash is saved in the flow_entry. The original code only does flow lookup in select_queue, so this patch adds a flow lookup in tun_net_xmit if num_queues == 1 (select_queue is not called from dev_queue_xmit->netdev_pick_tx in that case). The flow is recorded (processing CPU) in tun_flow_update (TX path), and reset when flow is deleted. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22 18:54:32 +08:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: socket filter support This patch adds Linux Socket Filter support to tun driver. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14 01:01:10 +00:00
sock: enable MSG_ZEROCOPY Prepare the datapath for refcounted ubuf_info. Clone ubuf_info with skb_zerocopy_clone() wherever needed due to skb split, merge, resize or clone. Split skb_orphan_frags into two variants. The split, merge, .. paths support reference counted zerocopy buffers, so do not do a deep copy. Add skb_orphan_frags_rx for paths that may loop packets to receive sockets. That is not allowed, as it may cause unbounded latency. Deep copy all zerocopy copy buffers, ref-counted or not, in this path. The exact locations to modify were chosen by exhaustively searching through all code that might modify skb_frag references and/or the the SKBTX_DEV_ZEROCOPY tx_flags bit. The changes err on the safe side, in two ways. (1) legacy ubuf_info paths virtio and tap are not modified. They keep a 1:1 ubuf_info to sk_buff relationship. Calls to skb_orphan_frags still call skb_copy_ubufs and thus copy frags in this case. (2) not all copies deep in the stack are addressed yet. skb_shift, skb_split and skb_try_coalesce can be refined to avoid copying. These are not in the hot path and this patch is hairy enough as is, so that is left for future refinement. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03 16:29:41 -04:00
tuntap: orphan frags before trying to set tx timestamp sock_tx_timestamp() will clear all zerocopy flags of skb which may lead the frags never to be orphaned. This will break guest to guest traffic when zerocopy is enabled. Fix this by orphaning the frags before trying to set tx time stamp. The issue were introduced by commit eda297729171fe16bf34fe5b0419dfb69060f623 (tun: Support software transmit time stamping). Cc: Richard Cochran <richardcochran@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 17:54:00 +08:00
tun: fix transmit timestamp support Instead of using sock_tx_timestamp, use skb_tx_timestamp to record software transmit timestamp of a packet. sock_tx_timestamp resets and overrides the tx_flags of the skb. The function is intended to be called from within the protocol layer when creating the skb, not from a device driver. This is inconsistent with other drivers and will cause issues for TCP. In TCP, we intend to sample the timestamps for the last byte for each sendmsg/sendpage. For that reason, tcp_sendmsg calls tcp_tx_timestamp only with the last skb that it generates. For example, if a 128KB message is split into two 64KB packets we want to sample the SND timestamp of the last packet. The current code in the tun driver, however, will result in sampling the SND timestamp for both packets. Also, when the last packet is split into smaller packets for retranmission (see tcp_fragment), the tun driver will record timestamps for all of the retransmitted packets and not only the last packet. Fixes: eda297729171 (tun: Support software transmit time stamping.) Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Francis Yan <francisyyan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 18:22:33 -04:00
tun: Support software transmit time stamping. This patch adds transmit time stamping to the tun/tap driver. Similar support already exists for UDP, can, and raw packets. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-19 19:40:10 +02:00
tun: orphan an skb on tx The following situation was observed in the field: tap1 sends packets, tap2 does not consume them, as a result tap1 can not be closed. This happens because tun/tap devices can hang on to skbs undefinitely. As noted by Herbert, possible solutions include a timeout followed by a copy/change of ownership of the skb, or always copying/changing ownership if we're going into a hostile device. This patch implements the second approach. Note: one issue still remaining is that since skbs keep reference to tun socket and tun socket has a reference to tun device, we won't flush backlog, instead simply waiting for all skbs to get transmitted. At least this is not user-triggerable, and this was not reported in practice, my assumption is other devices besides tap complete an skb within finite time after it has been queued. A possible solution for the second issue would not to have socket reference the device, instead, implement dev->destructor for tun, and wait for all skbs to complete there, but this needs some thought, probably too risky for 2.6.34. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Yan Vugenfirer <yvugenfi@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 04:59:44 +00:00
tuntap: orphan frags before trying to set tx timestamp sock_tx_timestamp() will clear all zerocopy flags of skb which may lead the frags never to be orphaned. This will break guest to guest traffic when zerocopy is enabled. Fix this by orphaning the frags before trying to set tx time stamp. The issue were introduced by commit eda297729171fe16bf34fe5b0419dfb69060f623 (tun: Support software transmit time stamping). Cc: Richard Cochran <richardcochran@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 17:54:00 +08:00
tun: orphan an skb on tx The following situation was observed in the field: tap1 sends packets, tap2 does not consume them, as a result tap1 can not be closed. This happens because tun/tap devices can hang on to skbs undefinitely. As noted by Herbert, possible solutions include a timeout followed by a copy/change of ownership of the skb, or always copying/changing ownership if we're going into a hostile device. This patch implements the second approach. Note: one issue still remaining is that since skbs keep reference to tun socket and tun socket has a reference to tun device, we won't flush backlog, instead simply waiting for all skbs to get transmitted. At least this is not user-triggerable, and this was not reported in practice, my assumption is other devices besides tap complete an skb within finite time after it has been queued. A possible solution for the second issue would not to have socket reference the device, instead, implement dev->destructor for tun, and wait for all skbs to complete there, but this needs some thought, probably too risky for 2.6.34. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Yan Vugenfirer <yvugenfi@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 04:59:44 +00:00
tun: add a missing nf_reset() in tun_net_xmit() Dave reported following crash : general protection fault: 0000 [#1] SMP CPU 2 Pid: 25407, comm: qemu-kvm Not tainted 3.7.9-205.fc18.x86_64 #1 Hewlett-Packard HP Z400 Workstation/0B4Ch RIP: 0010:[<ffffffffa0399bd5>] [<ffffffffa0399bd5>] destroy_conntrack+0x35/0x120 [nf_conntrack] RSP: 0018:ffff880276913d78 EFLAGS: 00010206 RAX: 50626b6b7876376c RBX: ffff88026e530d68 RCX: ffff88028d158e00 RDX: ffff88026d0d5470 RSI: 0000000000000011 RDI: 0000000000000002 RBP: ffff880276913d88 R08: 0000000000000000 R09: ffff880295002900 R10: 0000000000000000 R11: 0000000000000003 R12: ffffffff81ca3b40 R13: ffffffff8151a8e0 R14: ffff880270875000 R15: 0000000000000002 FS: 00007ff3bce38a00(0000) GS:ffff88029fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fd1430bd000 CR3: 000000027042b000 CR4: 00000000000027e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qemu-kvm (pid: 25407, threadinfo ffff880276912000, task ffff88028c369720) Stack: ffff880156f59100 ffff880156f59100 ffff880276913d98 ffffffff815534f7 ffff880276913db8 ffffffff8151a74b ffff880270875000 ffff880156f59100 ffff880276913dd8 ffffffff8151a5a6 ffff880276913dd8 ffff88026d0d5470 Call Trace: [<ffffffff815534f7>] nf_conntrack_destroy+0x17/0x20 [<ffffffff8151a74b>] skb_release_head_state+0x7b/0x100 [<ffffffff8151a5a6>] __kfree_skb+0x16/0xa0 [<ffffffff8151a666>] kfree_skb+0x36/0xa0 [<ffffffff8151a8e0>] skb_queue_purge+0x20/0x40 [<ffffffffa02205f7>] __tun_detach+0x117/0x140 [tun] [<ffffffffa022184c>] tun_chr_close+0x3c/0xd0 [tun] [<ffffffff8119669c>] __fput+0xec/0x240 [<ffffffff811967fe>] ____fput+0xe/0x10 [<ffffffff8107eb27>] task_work_run+0xa7/0xe0 [<ffffffff810149e1>] do_notify_resume+0x71/0xb0 [<ffffffff81640152>] int_signal+0x12/0x17 Code: 00 00 04 48 89 e5 41 54 53 48 89 fb 4c 8b a7 e8 00 00 00 0f 85 de 00 00 00 0f b6 73 3e 0f b7 7b 2a e8 10 40 00 00 48 85 c0 74 0e <48> 8b 40 28 48 85 c0 74 05 48 89 df ff d0 48 c7 c7 08 6a 3a a0 RIP [<ffffffffa0399bd5>] destroy_conntrack+0x35/0x120 [nf_conntrack] RSP <ffff880276913d78> This is because tun_net_xmit() needs to call nf_reset() before queuing skb into receive_queue Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06 11:02:37 +00:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
net-tun: restructure tun_do_read for better sleep/wakeup efficiency tun_do_read always adds current thread to wait queue, even if a packet is ready to read. This is inefficient because both sleeper and waker want to acquire the wait queue spin lock when packet rate is high. We restructure the read function and use common kernel networking routines to handle receive, sleep and wakeup. With the change available packets are checked first before the reading thread is added to the wait queue. Ran performance tests with the following configuration: - my packet generator -> tap1 -> br0 -> tap0 -> my packet consumer - sender pinned to one core and receiver pinned to another core - sender send small UDP packets (64 bytes total) as fast as it can - sandy bridge cores - throughput are receiver side goodput numbers The results are baseline: 731k pkts/sec, cpu utilization at 1.50 cpus changed: 783k pkts/sec, cpu utilization at 1.53 cpus The performance difference is largely determined by packet rate and inter-cpu communication cost. For example, if the sender and receiver are pinned to different cpu sockets, the results are baseline: 558k pkts/sec, cpu utilization at 1.71 cpus changed: 690k pkts/sec, cpu utilization at 1.67 cpus Co-authored-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xi Wang <xii@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 15:11:48 -07:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23 06:03:08 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tun: report orphan frags errors to zero copy callback When tun transmits a zero copy skb, it orphans the frags which might need to allocate extra memory, in atomic context. If that fails, notify ubufs callback before freeing the skb as a hint that device should disable zerocopy mode. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 09:16:32 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
tun: return NET_XMIT_DROP for dropped packets After commit 5d097109257c03a71845729f8db6b5770c4bbedc ("tun: only queue packets on device"), NETDEV_TX_OK was returned for dropped packets. This will confuse pktgen since dropped packets were counted as sent ones. Fixing this by returning NET_XMIT_DROP to let pktgen count it as error packet. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18 13:20:41 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: introduce and use netdev_features_t for device features sets v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-15 15:29:55 +00:00
net: tun: convert to hw_features This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 06:13:10 +00:00
tun: teach the tun/tap driver to support netpoll Commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093 changed the behavior of slave devices in regards to netpoll. Specifically it created a mutually exclusive relationship between being a slave and a netpoll-capable device. This creates problems for KVM because guests relied on needing netconsole active on a slave device to a bridge. Ideally libvirtd could just attach netconsole to the bridge device instead, but thats currently infeasible, because while the bridge device supports netpoll, it requires that all slave interface also support it, but the tun/tap driver currently does not. The most direct solution is to teach tun/tap to support netpoll, which is implemented by the patch below. I've not tested this yet, but its pretty straightforward. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Rik van Riel <riel@redhat.com> CC: Rik van Riel <riel@redhat.com> CC: Maxim Krasnyansky <maxk@qualcomm.com> CC: Cong Wang <amwang@redhat.com> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Rik van Riel <riel@redhat.com> Tested-by: Rik van Riel <riel@redhat.com> Reviewed-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-15 05:25:01 +00:00
tun: spelling fixes Fix spelling errors in tun driver. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 20:42:58 -08:00
tun: teach the tun/tap driver to support netpoll Commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093 changed the behavior of slave devices in regards to netpoll. Specifically it created a mutually exclusive relationship between being a slave and a netpoll-capable device. This creates problems for KVM because guests relied on needing netconsole active on a slave device to a bridge. Ideally libvirtd could just attach netconsole to the bridge device instead, but thats currently infeasible, because while the bridge device supports netpoll, it requires that all slave interface also support it, but the tun/tap driver currently does not. The most direct solution is to teach tun/tap to support netpoll, which is implemented by the patch below. I've not tested this yet, but its pretty straightforward. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Rik van Riel <riel@redhat.com> CC: Rik van Riel <riel@redhat.com> CC: Maxim Krasnyansky <maxk@qualcomm.com> CC: Cong Wang <amwang@redhat.com> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Rik van Riel <riel@redhat.com> Tested-by: Rik van Riel <riel@redhat.com> Reviewed-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-15 05:25:01 +00:00
tun: spelling fixes Fix spelling errors in tun driver. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 20:42:58 -08:00
tun: teach the tun/tap driver to support netpoll Commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093 changed the behavior of slave devices in regards to netpoll. Specifically it created a mutually exclusive relationship between being a slave and a netpoll-capable device. This creates problems for KVM because guests relied on needing netconsole active on a slave device to a bridge. Ideally libvirtd could just attach netconsole to the bridge device instead, but thats currently infeasible, because while the bridge device supports netpoll, it requires that all slave interface also support it, but the tun/tap driver currently does not. The most direct solution is to teach tun/tap to support netpoll, which is implemented by the patch below. I've not tested this yet, but its pretty straightforward. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Rik van Riel <riel@redhat.com> CC: Rik van Riel <riel@redhat.com> CC: Maxim Krasnyansky <maxk@qualcomm.com> CC: Cong Wang <amwang@redhat.com> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Rik van Riel <riel@redhat.com> Tested-by: Rik van Riel <riel@redhat.com> Reviewed-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-15 05:25:01 +00:00
net/tun: implement ndo_set_rx_headroom ndo_set_rx_headroom controls the align value used by tun devices to allocate skbs on frame reception. When the xmit device adds a large encapsulation, this avoids an skb head reallocation on forwarding. The measured improvement when forwarding towards a vxlan dev with frame size below the egress device MTU is as follow: vxlan over ipv6, bridged: +6% vxlan over ipv6, ovs: +7% In case of ipv4 tunnels there is no improvement, since the tun device default alignment provides enough headroom to avoid the skb head reallocation. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26 10:45:40 +01:00
net: make ndo_get_stats64 a void function The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 19:12:52 -08:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: convert to net_device_ops Convert the TUN/TAP tunnel driver to net_device_ops. Split the ops in two, and retain compatability. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 22:10:37 -08:00
tun: Fix races between tun_net_close and free_netdev. The tun code does not cope gracefully if the network device goes away before the tun file descriptor is closed. It looks like we can trigger this with rmmod, and moving tun devices between network namespaces will allow this to be triggered when network namespaces exit. To fix this I introduce an intermediate data structure tun_file which holds a count of users and a pointer to the struct tun_struct. tun_get increments that reference count if it is greater than 0. tun_put decrements that reference count and detaches from the network device if the count is 0. While we have a file attached to the network device I hold a reference to the network device keeping it from going away completely. When a network device is unregistered I decrement the count of the attached tun_file and if that was the last user I detach the tun_file, and all processes on read_wait are woken up to ensure they do not sleep indefinitely. As some of those sleeps happen with the count on the tun device elevated waking up the read waiters ensures that tun_file will be detached in a timely manner. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:07:17 +00:00
tun: convert to net_device_ops Convert the TUN/TAP tunnel driver to net_device_ops. Split the ops in two, and retain compatability. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 22:10:37 -08:00
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 20:14:53 -08:00
net: tun: convert to hw_features This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 06:13:10 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: teach the tun/tap driver to support netpoll Commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093 changed the behavior of slave devices in regards to netpoll. Specifically it created a mutually exclusive relationship between being a slave and a netpoll-capable device. This creates problems for KVM because guests relied on needing netconsole active on a slave device to a bridge. Ideally libvirtd could just attach netconsole to the bridge device instead, but thats currently infeasible, because while the bridge device supports netpoll, it requires that all slave interface also support it, but the tun/tap driver currently does not. The most direct solution is to teach tun/tap to support netpoll, which is implemented by the patch below. I've not tested this yet, but its pretty straightforward. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Rik van Riel <riel@redhat.com> CC: Rik van Riel <riel@redhat.com> CC: Maxim Krasnyansky <maxk@qualcomm.com> CC: Cong Wang <amwang@redhat.com> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Rik van Riel <riel@redhat.com> Tested-by: Rik van Riel <riel@redhat.com> Reviewed-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-15 05:25:01 +00:00
net/tun: implement ndo_set_rx_headroom ndo_set_rx_headroom controls the align value used by tun devices to allocate skbs on frame reception. When the xmit device adds a large encapsulation, this avoids an skb head reallocation on forwarding. The measured improvement when forwarding towards a vxlan dev with frame size below the egress device MTU is as follow: vxlan over ipv6, bridged: +6% vxlan over ipv6, ovs: +7% In case of ipv4 tunnels there is no improvement, since the tun device default alignment provides enough headroom to avoid the skb head reallocation. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26 10:45:40 +01:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tun: convert to net_device_ops Convert the TUN/TAP tunnel driver to net_device_ops. Split the ops in two, and retain compatability. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 22:10:37 -08:00
tun: Fix races between tun_net_close and free_netdev. The tun code does not cope gracefully if the network device goes away before the tun file descriptor is closed. It looks like we can trigger this with rmmod, and moving tun devices between network namespaces will allow this to be triggered when network namespaces exit. To fix this I introduce an intermediate data structure tun_file which holds a count of users and a pointer to the struct tun_struct. tun_get increments that reference count if it is greater than 0. tun_put decrements that reference count and detaches from the network device if the count is 0. While we have a file attached to the network device I hold a reference to the network device keeping it from going away completely. When a network device is unregistered I decrement the count of the attached tun_file and if that was the last user I detach the tun_file, and all processes on read_wait are woken up to ensure they do not sleep indefinitely. As some of those sleeps happen with the count on the tun device elevated waking up the read waiters ensures that tun_file will be detached in a timely manner. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:07:17 +00:00
tun: convert to net_device_ops Convert the TUN/TAP tunnel driver to net_device_ops. Split the ops in two, and retain compatability. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 22:10:37 -08:00
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 20:14:53 -08:00
net: tun: convert to hw_features This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 06:13:10 +00:00
net: remove use of ndo_set_multicast_list in drivers replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16 06:29:01 +00:00
tun: convert to net_device_ops Convert the TUN/TAP tunnel driver to net_device_ops. Split the ops in two, and retain compatability. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 22:10:37 -08:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: teach the tun/tap driver to support netpoll Commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093 changed the behavior of slave devices in regards to netpoll. Specifically it created a mutually exclusive relationship between being a slave and a netpoll-capable device. This creates problems for KVM because guests relied on needing netconsole active on a slave device to a bridge. Ideally libvirtd could just attach netconsole to the bridge device instead, but thats currently infeasible, because while the bridge device supports netpoll, it requires that all slave interface also support it, but the tun/tap driver currently does not. The most direct solution is to teach tun/tap to support netpoll, which is implemented by the patch below. I've not tested this yet, but its pretty straightforward. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Rik van Riel <riel@redhat.com> CC: Rik van Riel <riel@redhat.com> CC: Maxim Krasnyansky <maxk@qualcomm.com> CC: Cong Wang <amwang@redhat.com> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Rik van Riel <riel@redhat.com> Tested-by: Rik van Riel <riel@redhat.com> Reviewed-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-15 05:25:01 +00:00
tuntap: Don't segment multiple tagged packets on tap device Tap devices don't need to segment multiple tagged packets. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 15:03:27 +09:00
net/tun: implement ndo_set_rx_headroom ndo_set_rx_headroom controls the align value used by tun devices to allocate skbs on frame reception. When the xmit device adds a large encapsulation, this avoids an skb head reallocation on forwarding. The measured improvement when forwarding towards a vxlan dev with frame size below the egress device MTU is as follow: vxlan over ipv6, bridged: +6% vxlan over ipv6, ovs: +7% In case of ipv4 tunnels there is no improvement, since the tun device default alignment provides enough headroom to avoid the skb head reallocation. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26 10:45:40 +01:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: convert to net_device_ops Convert the TUN/TAP tunnel driver to net_device_ops. Split the ops in two, and retain compatability. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 22:10:37 -08:00
tun: Turn tun_flow_init() into void fn This routine doesn't fail since 9fdc6bef (tuntap: dont use a private kmem_cache) so it makes sense to compact the code a little bit. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11 17:01:08 +04:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
net: use core MTU range checking in core net infra geneve: - Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu - This one isn't quite as straight-forward as others, could use some closer inspection and testing macvlan: - set min/max_mtu tun: - set min/max_mtu, remove tun_net_change_mtu vxlan: - Merge __vxlan_change_mtu back into vxlan_change_mtu - Set max_mtu to IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function - This one is also not as straight-forward and could use closer inspection and testing from vxlan folks bridge: - set max_mtu of IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function openvswitch: - set min/max_mtu, remove internal_dev_change_mtu - note: max_mtu wasn't checked previously, it's been set to 65535, which is the largest possible size supported sch_teql: - set min/max_mtu (note: max_mtu previously unchecked, used max of 65535) macsec: - min_mtu = 0, max_mtu = 65535 macvlan: - min_mtu = 0, max_mtu = 65535 ntb_netdev: - min_mtu = 0, max_mtu = 65535 veth: - min_mtu = 68, max_mtu = 65535 8021q: - min_mtu = 0, max_mtu = 65535 CC: netdev@vger.kernel.org CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Tom Herbert <tom@herbertland.com> CC: Daniel Borkmann <daniel@iogearbox.net> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Paolo Abeni <pabeni@redhat.com> CC: Jiri Benc <jbenc@redhat.com> CC: WANG Cong <xiyou.wangcong@gmail.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Pravin B Shelar <pshelar@ovn.org> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Patrick McHardy <kaber@trash.net> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Pravin Shelar <pshelar@nicira.com> CC: Maxim Krasnyansky <maxk@qti.qualcomm.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 13:55:20 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: convert to net_device_ops Convert the TUN/TAP tunnel driver to net_device_ops. Split the ops in two, and retain compatability. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 22:10:37 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: Fix SIOCSIFHWADDR error. Set proper operations. Signed-off-by: Kusanagi Kouichi <slash@ma.neweb.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 18:23:28 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared After the last patch, We are left in a state in which only drivers calling ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real hardware call ether_setup for their net_devices and don't hold any state in their skbs. There are a handful of drivers that violate this assumption of course, and need to be fixed up. This patch identifies those drivers, and marks them as not being able to support the safe transmission of skbs by clearning the IFF_TX_SKB_SHARING flag in priv_flags Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Karsten Keil <isdn@linux-pingi.de> CC: "David S. Miller" <davem@davemloft.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Patrick McHardy <kaber@trash.net> CC: Krzysztof Halasa <khc@pm.waw.pl> CC: "John W. Linville" <linville@tuxdriver.com> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 06:05:38 +00:00
tun: allow setting ethernet addresss while running This is a pure software device, and ok with live address change. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10 15:16:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: replace random_ether_addr() with eth_hw_addr_random() Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15 06:45:39 +00:00
[NET] tun/tap: fixed hw address handling Fixed tun/tap driver's handling of hw addresses. The hw address is stored in both the net_device.dev_addr and tun.dev_addr fields. These fields were not kept synchronized, and in fact weren't even initialized to the same value. Now during both init and when performing SIOCSIFHWADDR on the tun device these values are both updated. However, if SIOCSIFHWADDR is performed on the net device directly (for instance, setting the hw address using ifconfig), the tun device does not get updated. Perhaps the tun.dev_addr field should be removed completely at some point, as it is redundant and net_device.dev_addr can be used anywhere it is used. Signed-off-by: Brian Braunstein <linuxkernel@bristyle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:00:55 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: use core MTU range checking in core net infra geneve: - Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu - This one isn't quite as straight-forward as others, could use some closer inspection and testing macvlan: - set min/max_mtu tun: - set min/max_mtu, remove tun_net_change_mtu vxlan: - Merge __vxlan_change_mtu back into vxlan_change_mtu - Set max_mtu to IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function - This one is also not as straight-forward and could use closer inspection and testing from vxlan folks bridge: - set max_mtu of IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function openvswitch: - set min/max_mtu, remove internal_dev_change_mtu - note: max_mtu wasn't checked previously, it's been set to 65535, which is the largest possible size supported sch_teql: - set min/max_mtu (note: max_mtu previously unchecked, used max of 65535) macsec: - min_mtu = 0, max_mtu = 65535 macvlan: - min_mtu = 0, max_mtu = 65535 ntb_netdev: - min_mtu = 0, max_mtu = 65535 veth: - min_mtu = 68, max_mtu = 65535 8021q: - min_mtu = 0, max_mtu = 65535 CC: netdev@vger.kernel.org CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Tom Herbert <tom@herbertland.com> CC: Daniel Borkmann <daniel@iogearbox.net> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Paolo Abeni <pabeni@redhat.com> CC: Jiri Benc <jbenc@redhat.com> CC: WANG Cong <xiyou.wangcong@gmail.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Pravin B Shelar <pshelar@ovn.org> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Patrick McHardy <kaber@trash.net> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Pravin Shelar <pshelar@nicira.com> CC: Maxim Krasnyansky <maxk@qti.qualcomm.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 13:55:20 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
tun: Move read_wait into tun_file The poll interface requires that the waitqueue exist while the struct file is open. In the rare case when a tun device disappears before the tun file closes we fail to provide this property, so move read_wait. This is safe now that tun_net_xmit is atomic with tun_detach. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:03:21 +00:00
tun/tap: Fix crashes if open() /dev/net/tun and then poll() it. Fix NULL pointer dereference in tun_chr_pool() introduced by commit 33dccbb050bbe35b88ca8cf1228dcf3e4d4b3554 ("tun: Limit amount of queued packets per device") and triggered by this code: int fd; struct pollfd pfd; fd = open("/dev/net/tun", O_RDWR); pfd.fd = fd; pfd.events = POLLIN | POLLOUT; poll(&pfd, 1, 0); Reported-by: Eugene Kapun <abacabadabacaba@gmail.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05 19:48:35 +00:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Use POLLERR not EBADF in tun_chr_poll EBADF is meaningless in the context of a poll mask so use POLLERR instead. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 10:59:05 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun/tap: Fix crashes if open() /dev/net/tun and then poll() it. Fix NULL pointer dereference in tun_chr_pool() introduced by commit 33dccbb050bbe35b88ca8cf1228dcf3e4d4b3554 ("tun: Limit amount of queued packets per device") and triggered by this code: int fd; struct pollfd pfd; fd = open("/dev/net/tun", O_RDWR); pfd.fd = fd; pfd.events = POLLIN | POLLOUT; poll(&pfd, 1, 0); Reported-by: Eugene Kapun <abacabadabacaba@gmail.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05 19:48:35 +00:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net-tun: restructure tun_do_read for better sleep/wakeup efficiency tun_do_read always adds current thread to wait queue, even if a packet is ready to read. This is inefficient because both sleeper and waker want to acquire the wait queue spin lock when packet rate is high. We restructure the read function and use common kernel networking routines to handle receive, sleep and wakeup. With the change available packets are checked first before the reading thread is added to the wait queue. Ran performance tests with the following configuration: - my packet generator -> tap1 -> br0 -> tap0 -> my packet consumer - sender pinned to one core and receiver pinned to another core - sender send small UDP packets (64 bytes total) as fast as it can - sandy bridge cores - throughput are receiver side goodput numbers The results are baseline: 731k pkts/sec, cpu utilization at 1.50 cpus changed: 783k pkts/sec, cpu utilization at 1.53 cpus The performance difference is largely determined by packet rate and inter-cpu communication cost. For example, if the sender and receiver are pinned to different cpu sockets, the results are baseline: 558k pkts/sec, cpu utilization at 1.71 cpus changed: 690k pkts/sec, cpu utilization at 1.67 cpus Co-authored-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xi Wang <xii@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 15:11:48 -07:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: fix premature POLLOUT notification on tun devices aszlig observed failing ssh tunnels (-w) during initialization since commit cc9da6cc4f56e0 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE"). We already had reports that the mentioned commit breaks Juniper VPN connections. I can't clearly say that the Juniper VPN client has the same problem, but it is worth a try to hint to this patch. Because of the early generation of link local addresses, the kernel now can start asking for routers on the local subnet much earlier than usual. Those router solicitation packets arrive inside the ssh channels and should be transmitted to the tun fd before the configuration scripts might have upped the interface and made it ready for transmission. ssh polls on the interface and receives back a POLL_OUT. It tries to send the earily router solicitation packet to the tun interface. Unfortunately it hasn't been up'ed yet by config scripts, thus failing with -EIO. ssh doesn't retry again and considers the tun interface broken forever. Link: https://bugzilla.kernel.org/show_bug.cgi?id=121131 Fixes: cc9da6cc4f56 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE") Cc: Bjørn Mork <bjorn@mork.no> Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Reported-by: Jonas Lippuner <jonas@lippuner.ca> Cc: Jonas Lippuner <jonas@lippuner.ca> Reported-by: aszlig <aszlig@redmoonstudios.org> Cc: aszlig <aszlig@redmoonstudios.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 00:00:26 +01:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tun: Fix races between tun_net_close and free_netdev. The tun code does not cope gracefully if the network device goes away before the tun file descriptor is closed. It looks like we can trigger this with rmmod, and moving tun devices between network namespaces will allow this to be triggered when network namespaces exit. To fix this I introduce an intermediate data structure tun_file which holds a count of users and a pointer to the struct tun_struct. tun_get increments that reference count if it is greater than 0. tun_put decrements that reference count and detaches from the network device if the count is 0. While we have a file attached to the network device I hold a reference to the network device keeping it from going away completely. When a network device is unregistered I decrement the count of the attached tun_file and if that was the last user I detach the tun_file, and all processes on read_wait are woken up to ensure they do not sleep indefinitely. As some of those sleeps happen with the count on the tun device elevated waking up the read waiters ensures that tun_file will be detached in a timely manner. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:07:17 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: fallback if skb_alloc() fails on big packets skb_alloc produces linear packets (using kmalloc()). That can fail, so should we fall back to making paged skbs. My original version of this patch always allocate paged skbs for big packets. But that made performance drop from 8.4 seconds to 8.8 seconds on 1G lguest->Host TCP xmit. So now we only do that as a fallback. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:15:10 -07:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: dont force inline of functions Current standard practice is to not mark most functions as inline and let compiler decide instead. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 14:33:08 +00:00
tun: fallback if skb_alloc() fails on big packets skb_alloc produces linear packets (using kmalloc()). That can fail, so should we fall back to making paged skbs. My original version of this patch always allocate paged skbs for big packets. But that made performance drop from 8.4 seconds to 8.8 seconds on 1G lguest->Host TCP xmit. So now we only do that as a fallback. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:15:10 -07:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: fallback if skb_alloc() fails on big packets skb_alloc produces linear packets (using kmalloc()). That can fail, so should we fall back to making paged skbs. My original version of this patch always allocate paged skbs for big packets. But that made performance drop from 8.4 seconds to 8.8 seconds on 1G lguest->Host TCP xmit. So now we only do that as a fallback. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:15:10 -07:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tun: fallback if skb_alloc() fails on big packets skb_alloc produces linear packets (using kmalloc()). That can fail, so should we fall back to making paged skbs. My original version of this patch always allocate paged skbs for big packets. But that made performance drop from 8.4 seconds to 8.8 seconds on 1G lguest->Host TCP xmit. So now we only do that as a fallback. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:15:10 -07:00
tun: Fix crash with non-GSO users When I made the tun driver use non-linear packets as the preferred option, it broke non-GSO users because they would end up allocating a completely non-linear packet, which triggers a crash when we call eth_type_trans. This patch reverts non-GSO users to using linear packets and adds a check to ensure that GSO users can't cause crashes in the same way. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-14 02:09:43 -07:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tun: fallback if skb_alloc() fails on big packets skb_alloc produces linear packets (using kmalloc()). That can fail, so should we fall back to making paged skbs. My original version of this patch always allocate paged skbs for big packets. But that made performance drop from 8.4 seconds to 8.8 seconds on 1G lguest->Host TCP xmit. So now we only do that as a fallback. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:15:10 -07:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
net: attempt high order allocations in sock_alloc_send_pskb() Adding paged frags skbs to af_unix sockets introduced a performance regression on large sends because of additional page allocations, even if each skb could carry at least 100% more payload than before. We can instruct sock_alloc_send_pskb() to attempt high order allocations. Most of the time, it does a single page allocation instead of 8. I added an additional parameter to sock_alloc_send_pskb() to let other users to opt-in for this new feature on followup patches. Tested: Before patch : $ netperf -t STREAM_STREAM STREAM STREAM TEST Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 2304 212992 212992 10.00 46861.15 After patch : $ netperf -t STREAM_STREAM STREAM STREAM TEST Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 2304 212992 212992 10.00 57981.11 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-08 14:38:47 -07:00
tun: fallback if skb_alloc() fails on big packets skb_alloc produces linear packets (using kmalloc()). That can fail, so should we fall back to making paged skbs. My original version of this patch always allocate paged skbs for big packets. But that made performance drop from 8.4 seconds to 8.8 seconds on 1G lguest->Host TCP xmit. So now we only do that as a fallback. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:15:10 -07:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tun: fallback if skb_alloc() fails on big packets skb_alloc produces linear packets (using kmalloc()). That can fail, so should we fall back to making paged skbs. My original version of this patch always allocate paged skbs for big packets. But that made performance drop from 8.4 seconds to 8.8 seconds on 1G lguest->Host TCP xmit. So now we only do that as a fallback. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:15:10 -07:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tun: fallback if skb_alloc() fails on big packets skb_alloc produces linear packets (using kmalloc()). That can fail, so should we fall back to making paged skbs. My original version of this patch always allocate paged skbs for big packets. But that made performance drop from 8.4 seconds to 8.8 seconds on 1G lguest->Host TCP xmit. So now we only do that as a fallback. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:15:10 -07:00
tun: rx batching We can only process 1 packet at one time during sendmsg(). This often lead bad cache utilization under heavy load. So this patch tries to do some batching during rx before submitting them to host network stack. This is done through accepting MSG_MORE as a hint from sendmsg() caller, if it was set, batch the packet temporarily in a linked list and submit them all once MSG_MORE were cleared. Tests were done by pktgen (burst=128) in guest over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% User were allowed to change per device batched packets through ethtool -C rx-frames. NAPI_POLL_WEIGHT were used as upper limitation to prevent bh from being disabled too long. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 15:02:03 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: rename generic_xdp to skb_xdp Rename "generic_xdp" to "skb_xdp" to avoid confusing it with the generic XDP which will be done at netif_receive_skb(). Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:09 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tun: make tun_build_skb() thread safe tun_build_skb() is not thread safe since it uses per queue page frag, this will break things when multiple threads are sending through same queue. Switch to use per-thread generator (no lock involved). Fixes: 66ccbc9c87c2 ("tap: use build_skb() for small packet") Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 22:14:33 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: reserve extra headroom only when XDP is set We reserve headroom unconditionally which could cause unnecessary stress on socket memory accounting because of increased trusesize. Fix this by only reserve extra headroom when XDP is set. Cc: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:08 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: reserve extra headroom only when XDP is set We reserve headroom unconditionally which could cause unnecessary stress on socket memory accounting because of increased trusesize. Fix this by only reserve extra headroom when XDP is set. Cc: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:08 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tuntap: properly align skb->head before building skb An unaligned alloc_frag->offset caused by previous allocation will result an unaligned skb->head. This will lead unaligned skb_shared_info and then unaligned dataref which requires to be aligned for accessing on some architecture. Fix this by aligning alloc_frag->offset before the frag refilling. Fixes: 0bbd7dad34f8 ("tun: make tun_build_skb() thread safe") Cc: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Wei Wei <dotweiba@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Reported-by: Wei Wei <dotweiba@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 11:05:44 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tun: reserve extra headroom only when XDP is set We reserve headroom unconditionally which could cause unnecessary stress on socket memory accounting because of increased trusesize. Fix this by only reserve extra headroom when XDP is set. Cc: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:08 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tun: reserve extra headroom only when XDP is set We reserve headroom unconditionally which could cause unnecessary stress on socket memory accounting because of increased trusesize. Fix this by only reserve extra headroom when XDP is set. Cc: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:08 +08:00
tun: rename generic_xdp to skb_xdp Rename "generic_xdp" to "skb_xdp" to avoid confusing it with the generic XDP which will be done at netif_receive_skb(). Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:09 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: rename generic_xdp to skb_xdp Rename "generic_xdp" to "skb_xdp" to avoid confusing it with the generic XDP which will be done at netif_receive_skb(). Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:09 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tuntap: disable preemption during XDP processing [ Upstream commit 23e43f07f896f8578318cfcc9466f1e8b8ab21b6 ] Except for tuntap, all other drivers' XDP was implemented at NAPI poll() routine in a bh. This guarantees all XDP operation were done at the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But for tuntap, we do it in process context and we try to protect XDP processing by RCU reader lock. This is insufficient since CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which breaks the assumption that all XDP were processed in the same CPU. Fixing this by simply disabling preemption during XDP processing. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-24 11:32:25 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: rename generic_xdp to skb_xdp Rename "generic_xdp" to "skb_xdp" to avoid confusing it with the generic XDP which will be done at netif_receive_skb(). Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:09 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: reserve extra headroom only when XDP is set We reserve headroom unconditionally which could cause unnecessary stress on socket memory accounting because of increased trusesize. Fix this by only reserve extra headroom when XDP is set. Cc: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:08 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tuntap: correctly add the missing XDP flush [ Upstream commit 1bb4f2e868a2891ab8bc668b8173d6ccb8c4ce6f ] We don't flush batched XDP packets through xdp_do_flush_map(), this will cause packets stall at TX queue. Consider we don't do XDP on NAPI poll(), the only possible fix is to call xdp_do_flush_map() immediately after xdp_do_redirect(). Note, this in fact won't try to batch packets through devmap, we could address in the future. Reported-by: Christoffer Dall <christoffer.dall@linaro.org> Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-24 11:32:26 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: fix rcu_read_lock imbalance in tun_build_skb [ Upstream commit 654d573845f35017dc397840fa03610fef3d08b0 ] rcu_read_lock in tun_build_skb is used to rcu_dereference tun->xdp_prog safely, rcu_read_unlock should be done in every return path. Now I could see one place missing it, where it returns NULL in switch-case XDP_REDIRECT, another palce using rcu_read_lock wrongly, where it returns NULL in if (xdp_xmit) chunk. So fix both in this patch. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-19 19:31:04 +08:00
tuntap: disable preemption during XDP processing [ Upstream commit 23e43f07f896f8578318cfcc9466f1e8b8ab21b6 ] Except for tuntap, all other drivers' XDP was implemented at NAPI poll() routine in a bh. This guarantees all XDP operation were done at the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But for tuntap, we do it in process context and we try to protect XDP processing by RCU reader lock. This is insufficient since CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which breaks the assumption that all XDP were processed in the same CPU. Fixing this by simply disabling preemption during XDP processing. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-24 11:32:25 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tuntap: disable preemption during XDP processing [ Upstream commit 23e43f07f896f8578318cfcc9466f1e8b8ab21b6 ] Except for tuntap, all other drivers' XDP was implemented at NAPI poll() routine in a bh. This guarantees all XDP operation were done at the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But for tuntap, we do it in process context and we try to protect XDP processing by RCU reader lock. This is insufficient since CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which breaks the assumption that all XDP were processed in the same CPU. Fixing this by simply disabling preemption during XDP processing. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-24 11:32:25 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: reserve extra headroom only when XDP is set We reserve headroom unconditionally which could cause unnecessary stress on socket memory accounting because of increased trusesize. Fix this by only reserve extra headroom when XDP is set. Cc: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:08 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: fix rcu_read_lock imbalance in tun_build_skb [ Upstream commit 654d573845f35017dc397840fa03610fef3d08b0 ] rcu_read_lock in tun_build_skb is used to rcu_dereference tun->xdp_prog safely, rcu_read_unlock should be done in every return path. Now I could see one place missing it, where it returns NULL in switch-case XDP_REDIRECT, another palce using rcu_read_lock wrongly, where it returns NULL in if (xdp_xmit) chunk. So fix both in this patch. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-19 19:31:04 +08:00
tuntap: disable preemption during XDP processing [ Upstream commit 23e43f07f896f8578318cfcc9466f1e8b8ab21b6 ] Except for tuntap, all other drivers' XDP was implemented at NAPI poll() routine in a bh. This guarantees all XDP operation were done at the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But for tuntap, we do it in process context and we try to protect XDP processing by RCU reader lock. This is insufficient since CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which breaks the assumption that all XDP were processed in the same CPU. Fixing this by simply disabling preemption during XDP processing. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-24 11:32:25 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tuntap: disable preemption during XDP processing [ Upstream commit 23e43f07f896f8578318cfcc9466f1e8b8ab21b6 ] Except for tuntap, all other drivers' XDP was implemented at NAPI poll() routine in a bh. This guarantees all XDP operation were done at the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But for tuntap, we do it in process context and we try to protect XDP processing by RCU reader lock. This is insufficient since CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which breaks the assumption that all XDP were processed in the same CPU. Fixing this by simply disabling preemption during XDP processing. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-24 11:32:25 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tuntap: disable preemption during XDP processing [ Upstream commit 23e43f07f896f8578318cfcc9466f1e8b8ab21b6 ] Except for tuntap, all other drivers' XDP was implemented at NAPI poll() routine in a bh. This guarantees all XDP operation were done at the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But for tuntap, we do it in process context and we try to protect XDP processing by RCU reader lock. This is insufficient since CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which breaks the assumption that all XDP were processed in the same CPU. Fixing this by simply disabling preemption during XDP processing. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-24 11:32:25 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
{macvtap,tun}_get_user(): switch to iov_iter allows to switch macvtap and tun from ->aio_write() to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-19 15:36:49 -04:00
tun: rx batching We can only process 1 packet at one time during sendmsg(). This often lead bad cache utilization under heavy load. So this patch tries to do some batching during rx before submitting them to host network stack. This is done through accepting MSG_MORE as a hint from sendmsg() caller, if it was set, batch the packet temporarily in a linked list and submit them all once MSG_MORE were cleared. Tests were done by pktgen (burst=128) in guest over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% User were allowed to change per device batched packets through ethtool -C rx-frames. NAPI_POLL_WEIGHT were used as upper limitation to prevent bh from being disabled too long. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 15:02:03 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: replace uses of __constant_{endian} Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01 00:45:17 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{macvtap,tun}_get_user(): switch to iov_iter allows to switch macvtap and tun from ->aio_write() to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-19 15:36:49 -04:00
net/tun: implement ndo_set_rx_headroom ndo_set_rx_headroom controls the align value used by tun devices to allocate skbs on frame reception. When the xmit device adds a large encapsulation, this avoids an skb head reallocation on forwarding. The measured improvement when forwarding towards a vxlan dev with frame size below the egress device MTU is as follow: vxlan over ipv6, bridged: +6% vxlan over ipv6, ovs: +7% In case of ipv4 tunnels there is no improvement, since the tun device default alignment provides enough headroom to avoid the skb head reallocation. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26 10:45:40 +01:00
tun: Allow GSO using virtio_net_hdr Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:48:02 -07:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tuntap: limit head length of skb allocated We currently use hdr_len as a hint of head length which is advertised by guest. But when guest advertise a very big value, it can lead to an 64K+ allocating of kmalloc() which has a very high possibility of failure when host memory is fragmented or under heavy stress. The huge hdr_len also reduce the effect of zerocopy or even disable if a gso skb is linearized in guest. To solves those issues, this patch introduces an upper limit (PAGE_SIZE) of the head, which guarantees an order 0 allocation each time. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-13 14:00:39 +08:00
tun: experimental zero copy tx support Let vhost-net utilize zero copy tx when used with tun. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20 09:23:23 +00:00
tuntap: dont use skb after netif_rx_ni(skb) On Wed, 2012-12-12 at 23:16 -0500, Dave Jones wrote: > Since todays net merge, I see this when I start openvpn.. > > general protection fault: 0000 [#1] PREEMPT SMP > Modules linked in: ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack nf_conntrack ip6table_filter ip6_tables xfs iTCO_wdt iTCO_vendor_support snd_emu10k1 snd_util_mem snd_ac97_codec coretemp ac97_bus microcode snd_hwdep snd_seq pcspkr snd_pcm snd_page_alloc snd_timer lpc_ich i2c_i801 snd_rawmidi mfd_core snd_seq_device snd e1000e soundcore emu10k1_gp gameport i82975x_edac edac_core vhost_net tun macvtap macvlan kvm_intel kvm binfmt_misc nfsd auth_rpcgss nfs_acl lockd sunrpc btrfs libcrc32c zlib_deflate firewire_ohci sata_sil firewire_core crc_itu_t radeon i2c_algo_bit drm_kms_helper ttm drm i2c_core floppy > CPU 0 > Pid: 1381, comm: openvpn Not tainted 3.7.0+ #14 /D975XBX > RIP: 0010:[<ffffffff815b54a4>] [<ffffffff815b54a4>] skb_flow_dissect+0x314/0x3e0 > RSP: 0018:ffff88007d0d9c48 EFLAGS: 00010206 > RAX: 000000000000055d RBX: 6b6b6b6b6b6b6b4b RCX: 1471030a0180040a > RDX: 0000000000000005 RSI: 00000000ffffffe0 RDI: ffff8800ba83fa80 > RBP: ffff88007d0d9cb8 R08: 0000000000000000 R09: 0000000000000000 > R10: 0000000000000000 R11: 0000000000000101 R12: ffff8800ba83fa80 > R13: 0000000000000008 R14: ffff88007d0d9cc8 R15: ffff8800ba83fa80 > FS: 00007f6637104800(0000) GS:ffff8800bf600000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00007f563f5b01c4 CR3: 000000007d140000 CR4: 00000000000007f0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process openvpn (pid: 1381, threadinfo ffff88007d0d8000, task ffff8800a540cd60) > Stack: > ffff8800ba83fa80 0000000000000296 0000000000000000 0000000000000000 > ffff88007d0d9cc8 ffffffff815bcff4 ffff88007d0d9ce8 ffffffff815b1831 > ffff88007d0d9ca8 00000000703f6364 ffff8800ba83fa80 0000000000000000 > Call Trace: > [<ffffffff815bcff4>] ? netif_rx+0x114/0x4c0 > [<ffffffff815b1831>] ? skb_copy_datagram_from_iovec+0x61/0x290 > [<ffffffff815b672a>] __skb_get_rxhash+0x1a/0xd0 > [<ffffffffa03b9538>] tun_get_user+0x418/0x810 [tun] > [<ffffffff8135f468>] ? delay_tsc+0x98/0xf0 > [<ffffffff8109605c>] ? __rcu_read_unlock+0x5c/0xa0 > [<ffffffffa03b9a41>] tun_chr_aio_write+0x81/0xb0 [tun] > [<ffffffff81145011>] ? __buffer_unlock_commit+0x41/0x50 > [<ffffffff811db917>] do_sync_write+0xa7/0xe0 > [<ffffffff811dc01f>] vfs_write+0xaf/0x190 > [<ffffffff811dc375>] sys_write+0x55/0xa0 > [<ffffffff81705540>] tracesys+0xdd/0xe2 > Code: 41 8b 44 24 68 41 2b 44 24 6c 01 de 29 f0 83 f8 03 0f 8e a0 00 00 00 48 63 de 49 03 9c 24 e0 00 00 00 48 85 db 0f 84 72 fe ff ff <8b> 03 41 89 46 08 b8 01 00 00 00 e9 43 fd ff ff 0f 1f 40 00 48 > RIP [<ffffffff815b54a4>] skb_flow_dissect+0x314/0x3e0 > RSP <ffff88007d0d9c48> > ---[ end trace 6d42c834c72c002e ]--- > > > Faulting instruction is > > 0: 8b 03 mov (%rbx),%eax > > rbx is slab poison (-20) so this looks like a use-after-free here... > > flow->ports = *ports; > 314: 8b 03 mov (%rbx),%eax > 316: 41 89 46 08 mov %eax,0x8(%r14) > > in the inlined skb_header_pointer in skb_flow_dissect > > Dave > commit 96442e4242 (tuntap: choose the txq based on rxq) added a use after free. Cache rxhash in a temp variable before calling netif_rx_ni() Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-12 19:22:57 +00:00
tun: rename generic_xdp to skb_xdp Rename "generic_xdp" to "skb_xdp" to avoid confusing it with the generic XDP which will be done at netif_receive_skb(). Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:09 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: honor IFF_UP in tun_get_user() If a tun interface is turned down, we should not allow packet injection into the kernel. Kernel does not send packets to the tun already. TUNATTACHFILTER can not be used as only tun_net_xmit() is taking care of it. Reported-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16 08:57:37 -08:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: signedness bug in tun_get_user() The recent fix d9bf5f1309 "tun: compare with 0 instead of total_len" is not totally correct. Because "len" and "sizeof()" are size_t type, that means they are never less than zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-15 15:52:57 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: signedness bug in tun_get_user() The recent fix d9bf5f1309 "tun: compare with 0 instead of total_len" is not totally correct. Because "len" and "sizeof()" are size_t type, that means they are never less than zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-15 15:52:57 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[iov_iter] new primitives - copy_from_iter_full() and friends copy_from_iter_full(), copy_from_iter_full_nocache() and csum_and_copy_from_iter_full() - counterparts of copy_from_iter() et.al., advancing iterator only in case of successful full copy and returning whether it had been successful or not. Convert some obvious users. *NOTE* - do not blindly assume that something is a good candidate for those unless you are sure that not advancing iov_iter in failure case is the right thing in this case. Anything that does short read/short write kind of stuff (or is in a loop, etc.) is unlikely to be a good one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-11-01 22:09:04 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: read vnet_hdr_sz once When IFF_VNET_HDR is enabled, a virtio_net header must precede data. Data length is verified to be greater than or equal to expected header length tun->vnet_hdr_sz before copying. Read this value once and cache locally, as it can be updated between the test and use (TOCTOU). Signed-off-by: Willem de Bruijn <willemb@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> CC: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:48 -05:00
tun: Allow GSO using virtio_net_hdr Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:48:02 -07:00
tun: read vnet_hdr_sz once When IFF_VNET_HDR is enabled, a virtio_net header must precede data. Data length is verified to be greater than or equal to expected header length tun->vnet_hdr_sz before copying. Read this value once and cache locally, as it can be updated between the test and use (TOCTOU). Signed-off-by: Willem de Bruijn <willemb@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> CC: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:48 -05:00
tun: Allow GSO using virtio_net_hdr Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:48:02 -07:00
[iov_iter] new primitives - copy_from_iter_full() and friends copy_from_iter_full(), copy_from_iter_full_nocache() and csum_and_copy_from_iter_full() - counterparts of copy_from_iter() et.al., advancing iterator only in case of successful full copy and returning whether it had been successful or not. Convert some obvious users. *NOTE* - do not blindly assume that something is a good candidate for those unless you are sure that not advancing iov_iter in failure case is the right thing in this case. Anything that does short read/short write kind of stuff (or is in a loop, etc.) is unlikely to be a good one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-11-01 22:09:04 -04:00
tun: Allow GSO using virtio_net_hdr Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:48:02 -07:00
tun: Optimise handling of bogus gso->hdr_len As all current versions of virtio_net generate a value for the header length that's too small, we should optimise this so that we don't copy it twice. This can be done by ensuring that it is at least as large as the place where we'll write the checksum. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08 00:20:01 -07:00
tun: TUN_VNET_LE support, fix sparse warnings for virtio headers Pretty straight-forward: convert all fields to/from virtio endian-ness. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2014-10-23 22:59:31 +03:00
tun: Optimise handling of bogus gso->hdr_len As all current versions of virtio_net generate a value for the header length that's too small, we should optimise this so that we don't copy it twice. This can be done by ensuring that it is at least as large as the place where we'll write the checksum. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08 00:20:01 -07:00
tun: TUN_VNET_LE support, fix sparse warnings for virtio headers Pretty straight-forward: convert all fields to/from virtio endian-ness. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2014-10-23 22:59:31 +03:00
tun: Allow GSO using virtio_net_hdr Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:48:02 -07:00
tun: read vnet_hdr_sz once When IFF_VNET_HDR is enabled, a virtio_net header must precede data. Data length is verified to be greater than or equal to expected header length tun->vnet_hdr_sz before copying. Read this value once and cache locally, as it can be updated between the test and use (TOCTOU). Signed-off-by: Willem de Bruijn <willemb@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> CC: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:48 -05:00
tun: Allow GSO using virtio_net_hdr Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:48:02 -07:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: reserves space for network in skb The tun driver allocates skb's to hold data from user and then passes the data into the network stack as received data. Most network devices allocate the receive skb with routines like dev_alloc_skb() that reserves additional space for use by network protocol stack but tun does not. Because of the lack of padding, when the packet is passed through bridge netfilter a new skb has to be allocated. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 14:33:07 +00:00
tun: Fix crash with non-GSO users When I made the tun driver use non-linear packets as the preferred option, it broke non-GSO users because they would end up allocating a completely non-linear packet, which triggers a crash when we call eth_type_trans. This patch reverts non-GSO users to using linear packets and adds a check to ensure that GSO users can't cause crashes in the same way. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-14 02:09:43 -07:00
tun: TUN_VNET_LE support, fix sparse warnings for virtio headers Pretty straight-forward: convert all fields to/from virtio endian-ness. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2014-10-23 22:59:31 +03:00
net: check for underlength tap writes If the user gives a packet under 14 bytes, we'll end up reading off the end of the skb (not oopsing, just reading off the end). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyanskiy <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:49:30 -07:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
tuntap: limit head length of skb allocated We currently use hdr_len as a hint of head length which is advertised by guest. But when guest advertise a very big value, it can lead to an 64K+ allocating of kmalloc() which has a very high possibility of failure when host memory is fragmented or under heavy stress. The huge hdr_len also reduce the effect of zerocopy or even disable if a gso skb is linearized in guest. To solves those issues, this patch introduces an upper limit (PAGE_SIZE) of the head, which guarantees an order 0 allocation each time. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-13 14:00:39 +08:00
tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS We try to linearize part of the skb when the number of iov is greater than MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest network. Solve this problem by calculate the pages needed for iov before trying to do zerocopy and switch to use copy instead of zerocopy if it needs more than MAX_SKB_FRAGS. This is done through introducing a new helper to count the pages for iov, and call uarg->callback() manually when switching from zerocopy to copy to notify vhost. We can do further optimization on top. The bug were introduced from commit 0690899b4d4501b3505be069b9a687e68ccbe15b (tun: experimental zero copy tx support) Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-18 10:55:15 +08:00
{macvtap,tun}_get_user(): switch to iov_iter allows to switch macvtap and tun from ->aio_write() to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-19 15:36:49 -04:00
tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS We try to linearize part of the skb when the number of iov is greater than MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest network. Solve this problem by calculate the pages needed for iov before trying to do zerocopy and switch to use copy instead of zerocopy if it needs more than MAX_SKB_FRAGS. This is done through introducing a new helper to count the pages for iov, and call uarg->callback() manually when switching from zerocopy to copy to notify vhost. We can do further optimization on top. The bug were introduced from commit 0690899b4d4501b3505be069b9a687e68ccbe15b (tun: experimental zero copy tx support) Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-18 10:55:15 +08:00
tun: experimental zero copy tx support Let vhost-net utilize zero copy tx when used with tun. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20 09:23:23 +00:00
tun: TUN_VNET_LE support, fix sparse warnings for virtio headers Pretty straight-forward: convert all fields to/from virtio endian-ness. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2014-10-23 22:59:31 +03:00
tuntap: limit head length of skb allocated We currently use hdr_len as a hint of head length which is advertised by guest. But when guest advertise a very big value, it can lead to an 64K+ allocating of kmalloc() which has a very high possibility of failure when host memory is fragmented or under heavy stress. The huge hdr_len also reduce the effect of zerocopy or even disable if a gso skb is linearized in guest. To solves those issues, this patch introduces an upper limit (PAGE_SIZE) of the head, which guarantees an order 0 allocation each time. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-13 14:00:39 +08:00
tuntap: correctly linearize skb when zerocopy is used Userspace may produce vectors greater than MAX_SKB_FRAGS. When we try to linearize parts of the skb to let the rest of iov to be fit in the frags, we need count copylen into linear when calling tun_alloc_skb() instead of partly counting it into data_len. Since this breaks zerocopy_sg_from_iovec() since its inner counter assumes nr_frags should be zero at beginning. This cause nr_frags to be increased wrongly without setting the correct frags. This bug were introduced from 0690899b4d4501b3505be069b9a687e68ccbe15b (tun: experimental zero copy tx support) Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10 13:43:27 +08:00
{macvtap,tun}_get_user(): switch to iov_iter allows to switch macvtap and tun from ->aio_write() to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-19 15:36:49 -04:00
tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS We try to linearize part of the skb when the number of iov is greater than MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest network. Solve this problem by calculate the pages needed for iov before trying to do zerocopy and switch to use copy instead of zerocopy if it needs more than MAX_SKB_FRAGS. This is done through introducing a new helper to count the pages for iov, and call uarg->callback() manually when switching from zerocopy to copy to notify vhost. We can do further optimization on top. The bug were introduced from commit 0690899b4d4501b3505be069b9a687e68ccbe15b (tun: experimental zero copy tx support) Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-18 10:55:15 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tun: rename generic_xdp to skb_xdp Rename "generic_xdp" to "skb_xdp" to avoid confusing it with the generic XDP which will be done at netif_receive_skb(). Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:09 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
tun: experimental zero copy tx support Let vhost-net utilize zero copy tx when used with tun. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20 09:23:23 +00:00
tap: use build_skb() for small packet We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate skb in the past. This socket based method is not suitable for high speed userspace like virtualization which usually: - ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as possible - don't want to be block at sendmsg() To eliminate the above overheads, this patch tries to use build_skb() for small packet. We will do this only when the following conditions are all met: - TAP instead of TUN - sk_sndbuf is INT_MAX - caller don't want to be blocked - zerocopy is not used - packet size is smaller enough to use build_skb() Pktgen from guest to host shows ~11% improvement for rx pps of tap: Before: ~1.70Mpps After : ~1.88Mpps What's more important, this makes it possible to implement XDP for tap before creating skbs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:16 +08:00
[TUN]: Fix leak in tun_get_user() We're leaking an skb in a failure path in this function. Coverity #632 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-11 18:49:13 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
virtio_net: Simplify call sites for virtio_net_hdr_{from, to}_skb(). No point storing the return value of virtio_net_hdr_to_skb() or virtio_net_hdr_from_skb() to a variable when the value is used only once as a boolean in an immediately following if statement. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18 15:40:38 -08:00
tun: fix csum generation for tap devices The commit 34166093639b ("tuntap: use common code for virtio_net_hdr and skb GSO conversion") replaced the tun code for header manipulation with the generic helpers. While doing so, it implictly moved the skb_partial_csum_set() invocation after eth_type_trans(), which invalidate the current gso start/offset values. Fix it by moving the helper invocation before the mac pulling. Fixes: 34166093639 ("tuntap: use common code for virtio_net_hdr and skb GSO conversion") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 00:00:04 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: bail out from tun_get_user() if the skb is empty KMSAN (https://github.com/google/kmsan) reported accessing uninitialized skb->data[0] in the case the skb is empty (i.e. skb->len is 0): ================================================ BUG: KMSAN: use of uninitialized memory in tun_get_user+0x19ba/0x3770 CPU: 0 PID: 3051 Comm: probe Not tainted 4.13.0+ #3140 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: ... __msan_warning_32+0x66/0xb0 mm/kmsan/kmsan_instr.c:477 tun_get_user+0x19ba/0x3770 drivers/net/tun.c:1301 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:245 ... origin: ... kmsan_poison_shadow+0x6e/0xc0 mm/kmsan/kmsan.c:211 slab_alloc_node mm/slub.c:2732 __kmalloc_node_track_caller+0x351/0x370 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x26a/0x810 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:903 alloc_skb_with_frags+0x1d7/0xc80 net/core/skbuff.c:4756 sock_alloc_send_pskb+0xabf/0xfe0 net/core/sock.c:2037 tun_alloc_skb drivers/net/tun.c:1144 tun_get_user+0x9a8/0x3770 drivers/net/tun.c:1274 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:245 ================================================ Make sure tun_get_user() doesn't touch skb->data[0] unless there is actual data. C reproducer below: ========================== // autogenerated by syzkaller (http://github.com/google/syzkaller) #define _GNU_SOURCE #include <fcntl.h> #include <linux/if_tun.h> #include <netinet/ip.h> #include <net/if.h> #include <string.h> #include <sys/ioctl.h> int main() { int sock = socket(PF_INET, SOCK_STREAM, IPPROTO_IP); int tun_fd = open("/dev/net/tun", O_RDWR); struct ifreq req; memset(&req, 0, sizeof(struct ifreq)); strcpy((char*)&req.ifr_name, "gre0"); req.ifr_flags = IFF_UP | IFF_MULTICAST; ioctl(tun_fd, TUNSETIFF, &req); ioctl(sock, SIOCSIFFLAGS, "gre0"); write(tun_fd, "hi", 0); return 0; } ========================== Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28 11:32:37 +02:00
tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is set By default, tun.c running in TUN_TUN_DEV mode will set the protocol of packet to IPv4 if TUN_NO_PI is set. My program failed to work when I assumed that the driver will check the first nibble of packet, determine IP version and set the appropriate protocol. Signed-off-by: Ang Way Chuang <wcang@nav6.org> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 21:10:33 -07:00
tun: bail out from tun_get_user() if the skb is empty KMSAN (https://github.com/google/kmsan) reported accessing uninitialized skb->data[0] in the case the skb is empty (i.e. skb->len is 0): ================================================ BUG: KMSAN: use of uninitialized memory in tun_get_user+0x19ba/0x3770 CPU: 0 PID: 3051 Comm: probe Not tainted 4.13.0+ #3140 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: ... __msan_warning_32+0x66/0xb0 mm/kmsan/kmsan_instr.c:477 tun_get_user+0x19ba/0x3770 drivers/net/tun.c:1301 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:245 ... origin: ... kmsan_poison_shadow+0x6e/0xc0 mm/kmsan/kmsan.c:211 slab_alloc_node mm/slub.c:2732 __kmalloc_node_track_caller+0x351/0x370 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x26a/0x810 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:903 alloc_skb_with_frags+0x1d7/0xc80 net/core/skbuff.c:4756 sock_alloc_send_pskb+0xabf/0xfe0 net/core/sock.c:2037 tun_alloc_skb drivers/net/tun.c:1144 tun_get_user+0x9a8/0x3770 drivers/net/tun.c:1274 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:245 ================================================ Make sure tun_get_user() doesn't touch skb->data[0] unless there is actual data. C reproducer below: ========================== // autogenerated by syzkaller (http://github.com/google/syzkaller) #define _GNU_SOURCE #include <fcntl.h> #include <linux/if_tun.h> #include <netinet/ip.h> #include <net/if.h> #include <string.h> #include <sys/ioctl.h> int main() { int sock = socket(PF_INET, SOCK_STREAM, IPPROTO_IP); int tun_fd = open("/dev/net/tun", O_RDWR); struct ifreq req; memset(&req, 0, sizeof(struct ifreq)); strcpy((char*)&req.ifr_name, "gre0"); req.ifr_flags = IFF_UP | IFF_MULTICAST; ioctl(tun_fd, TUNSETIFF, &req); ioctl(sock, SIOCSIFFLAGS, "gre0"); write(tun_fd, "hi", 0); return 0; } ========================== Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28 11:32:37 +02:00
tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is set By default, tun.c running in TUN_TUN_DEV mode will set the protocol of packet to IPv4 if TUN_NO_PI is set. My program failed to work when I assumed that the driver will check the first nibble of packet, determine IP version and set the appropriate protocol. Signed-off-by: Ang Way Chuang <wcang@nav6.org> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 21:10:33 -07:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is set By default, tun.c running in TUN_TUN_DEV mode will set the protocol of packet to IPv4 if TUN_NO_PI is set. My program failed to work when I assumed that the driver will check the first nibble of packet, determine IP version and set the appropriate protocol. Signed-off-by: Ang Way Chuang <wcang@nav6.org> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 21:10:33 -07:00
[SK_BUFF]: Introduce skb_reset_mac_header(skb) For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-19 15:30:44 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ETH]: Make eth_type_trans set skb->dev like the other *_type_trans One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 17:40:23 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: Remove unnecessary semicolons Semicolons are not necessary after switch/while/for/if braces so remove them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-03 11:51:20 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: experimental zero copy tx support Let vhost-net utilize zero copy tx when used with tun. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20 09:23:23 +00:00
net: Fix possible wrong checksum generation. Patch cef401de7be8c4e (net: fix possible wrong checksum generation) fixed wrong checksum calculation but it broke TSO by defining new GSO type but not a netdev feature for that type. net_gso_ok() would not allow hardware checksum/segmentation offload of such packets without the feature. Following patch fixes TSO and wrong checksum. This patch uses same logic that Eric Dumazet used. Patch introduces new flag SKBTX_SHARED_FRAG if at least one frag can be modified by the user. but SKBTX_SHARED_FRAG flag is kept in skb shared info tx_flags rather than gso_type. tx_flags is better compared to gso_type since we can have skb with shared frag without gso packet. It does not link SHARED_FRAG to GSO, So there is no need to define netdev feature for this. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11 09:27:41 +00:00
tun: handle ubuf refcount correctly when meet errors We trigger uarg->callback() immediately after we decide do datacopy even if caller want to do zerocopy. This will cause the callback (vhost_net_zerocopy_callback) decrease the refcount. But when we meet an error afterwards, the error handling in vhost handle_tx() will try to decrease it again. This is wrong and fix this by delay the uarg->callback() until we're sure there's no errors. Reported-by: wangyunjian <wangyunjian@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 13:17:51 +08:00
tun: experimental zero copy tx support Let vhost-net utilize zero copy tx when used with tun. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20 09:23:23 +00:00
Revert "drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets" This reverts commit 5188cd44c55db3e92cd9e77a40b5baa7ed4340f7. Now that GSO layer can track if fragment id has been selected and can allocate one if necessary, we don't need to do this in tap and macvtap. This reverts most of the code and only keeps the new ipv6 fragment id generation function that is still needed. Fixes: 3d0ad09412ff (drivers/net: Disable UFO through virtio) Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 16:36:16 -05:00
net: switch to use skb_probe_transport_header() Switch to use the new help skb_probe_transport_header() to do the l4 header probing for untrusted sources. For packets with partial csum, the header should already been set by skb_partial_csum_set(). Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 23:11:22 +00:00
tuntap: set transport header before passing it to kernel Currently, for the packets receives from tuntap, before doing header check, kernel just reset the transport header in netif_receive_skb() which pretends no l4 header. This is suboptimal for precise packet length estimation (introduced in 1def9238) which needs correct l4 header for gso packets. So this patch set the transport header to csum_start for partial checksum packets, otherwise it first try skb_flow_dissect(), if it fails, just reset the transport header. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25 20:19:56 +00:00
tun: rename generic_xdp to skb_xdp Rename "generic_xdp" to "skb_xdp" to avoid confusing it with the generic XDP which will be done at netif_receive_skb(). Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 11:36:09 +08:00
tap: XDP support This patch tries to implement XDP for tun. The implementation was split into two parts: - fast path: small and no gso packet. We try to do XDP at page level before build_skb(). For XDP_TX, since creating/destroying queues were completely under control of userspace, it was implemented through generic XDP helper after skb has been built. This could be optimized in the future. - slow path: big or gso packet. We try to do it after skb was created through generic XDP helpers. Test were done through pktgen with small packets. xdp1 test shows ~41.1% improvement: Before: ~1.7Mpps After: ~2.3Mpps xdp_redirect to ixgbe shows ~60% improvement: Before: ~0.8Mpps After: ~1.38Mpps Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 19:41:18 +08:00
tun: use symmetric hash Tun actually expects a symmetric hash for queue selecting to work correctly, otherwise packets belongs to a single flow may be redirected to the wrong queue. So this patch switch to use __skb_get_hash_symmetric(). Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06 14:09:49 +08:00
tun: Use netif_receive_skb instead of netif_rx This patch changes tun.c to call netif_receive_skb instead of netif_rx when a packet is received (if CONFIG_4KSTACKS is not enabled to avoid stack exhaustion). The difference between the two is that netif_rx queues the packet into the backlog, and netif_receive_skb proccesses the packet in the current context. This patch is required for syzkaller [1] to collect coverage from packet receive paths, when a packet being received through tun (syzkaller collects coverage per process in the process context). As mentioned by Eric this change also speeds up tun/tap. As measured by Peter it speeds up his closed-loop single-stream tap/OVS benchmark by about 23%, from 700k packets/second to 867k packets/second. A similar patch was introduced back in 2010 [2, 3], but the author found out that the patch doesn't help with the task he had in mind (for cgroups to shape network traffic based on the original process) and decided not to go further with it. The main concern back then was about possible stack exhaustion with 4K stacks. [1] https://github.com/google/syzkaller [2] https://www.spinics.net/lists/netdev/thrd440.html#130570 [3] https://www.spinics.net/lists/netdev/msg130570.html Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01 10:34:40 +01:00
tun: rx batching We can only process 1 packet at one time during sendmsg(). This often lead bad cache utilization under heavy load. So this patch tries to do some batching during rx before submitting them to host network stack. This is done through accepting MSG_MORE as a hint from sendmsg() caller, if it was set, batch the packet temporarily in a linked list and submit them all once MSG_MORE were cleared. Tests were done by pktgen (burst=128) in guest over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% User were allowed to change per device batched packets through ethtool -C rx-frames. NAPI_POLL_WEIGHT were used as upper limitation to prevent bh from being disabled too long. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 15:02:03 +08:00
tun: Use netif_receive_skb instead of netif_rx This patch changes tun.c to call netif_receive_skb instead of netif_rx when a packet is received (if CONFIG_4KSTACKS is not enabled to avoid stack exhaustion). The difference between the two is that netif_rx queues the packet into the backlog, and netif_receive_skb proccesses the packet in the current context. This patch is required for syzkaller [1] to collect coverage from packet receive paths, when a packet being received through tun (syzkaller collects coverage per process in the process context). As mentioned by Eric this change also speeds up tun/tap. As measured by Peter it speeds up his closed-loop single-stream tap/OVS benchmark by about 23%, from 700k packets/second to 867k packets/second. A similar patch was introduced back in 2010 [2, 3], but the author found out that the patch doesn't help with the task he had in mind (for cgroups to shape network traffic based on the original process) and decided not to go further with it. The main concern back then was about possible stack exhaustion with 4K stacks. [1] https://github.com/google/syzkaller [2] https://www.spinics.net/lists/netdev/thrd440.html#130570 [3] https://www.spinics.net/lists/netdev/msg130570.html Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01 10:34:40 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Use netif_receive_skb instead of netif_rx This patch changes tun.c to call netif_receive_skb instead of netif_rx when a packet is received (if CONFIG_4KSTACKS is not enabled to avoid stack exhaustion). The difference between the two is that netif_rx queues the packet into the backlog, and netif_receive_skb proccesses the packet in the current context. This patch is required for syzkaller [1] to collect coverage from packet receive paths, when a packet being received through tun (syzkaller collects coverage per process in the process context). As mentioned by Eric this change also speeds up tun/tap. As measured by Peter it speeds up his closed-loop single-stream tap/OVS benchmark by about 23%, from 700k packets/second to 867k packets/second. A similar patch was introduced back in 2010 [2, 3], but the author found out that the patch doesn't help with the task he had in mind (for cgroups to shape network traffic based on the original process) and decided not to go further with it. The main concern back then was about possible stack exhaustion with 4K stacks. [1] https://github.com/google/syzkaller [2] https://www.spinics.net/lists/netdev/thrd440.html#130570 [3] https://www.spinics.net/lists/netdev/msg130570.html Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01 10:34:40 +01:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: allow polling/writing/reading when detached We forbid polling, writing and reading when the file were detached, this may complex the user in several cases: - when guest pass some buffers to vhost/qemu and then disable some queues, host/qemu needs to do its own cleanup on those buffers which is complex sometimes. We can do this simply by allowing a user can still write to an disabled queue. Write to an disabled queue will cause the packet pass to the kernel and read will get nothing. - align the polling behavior with macvtap which never fails when the queue is created. This can simplify the polling errors handling of its user (e.g vhost) We can simply achieve this by don't assign NULL to tfile->tun when detached. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 01:05:19 +00:00
tun: experimental zero copy tx support Let vhost-net utilize zero copy tx when used with tun. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20 09:23:23 +00:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{macvtap,tun}_get_user(): switch to iov_iter allows to switch macvtap and tun from ->aio_write() to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-19 15:36:49 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tun: Fix merge error When forward-porting the tun accounting patch I managed to break the send path compltely by dropping the tun_get call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-14 20:46:39 -08:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: rx batching We can only process 1 packet at one time during sendmsg(). This often lead bad cache utilization under heavy load. So this patch tries to do some batching during rx before submitting them to host network stack. This is done through accepting MSG_MORE as a hint from sendmsg() caller, if it was set, batch the packet temporarily in a linked list and submit them all once MSG_MORE were cleared. Tests were done by pktgen (burst=128) in guest over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% User were allowed to change per device batched packets through ethtool -C rx-frames. NAPI_POLL_WEIGHT were used as upper limitation to prevent bh from being disabled too long. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 15:02:03 +08:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: dont force inline of functions Current standard practice is to not mark most functions as inline and let compiler decide instead. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 14:33:08 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: dont force inline of functions Current standard practice is to not mark most functions as inline and let compiler decide instead. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 14:33:08 +00:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
tun: fix issues of iovec iterators using in tun_put_user() This patch fixes two issues after using iovec iterators: - vlan_offset should be initialized to zero, otherwise unexpected offset will be used in skb_copy_datagram_iter() - advance iovec iterator when vnet_hdr_sz is greater than sizeof(gso), this is the case when mergeable rx buffer were enabled for a virt guest. Fixes e0b46d0ee9c240c7430a47e9b0365674d4a04522 ("tun: Use iovec iterators") Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13 16:54:14 +08:00
tun: Fix csum_start with VLAN acceleration When VLAN acceleration is in use on the xmit path, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN acceleration is detected. Fixes: 6680ec68eff4 ("tuntap: hardware vlan tx support") Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 04:30:13 +08:00
tun: Fix TUN_PKT_STRIP setting We set the flag TUN_PKT_STRIP if the user buffer provided is too small to contain the entire packet plus meta-data. However, this has been broken ever since we added GSO meta-data. VLAN acceleration also has the same problem. This patch fixes this by taking both into account when setting the TUN_PKT_STRIP flag. The fact that this has been broken for six years without anyone realising means that nobody actually uses this flag. Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 04:30:14 +08:00
tun: Fix csum_start with VLAN acceleration When VLAN acceleration is in use on the xmit path, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN acceleration is detected. Fixes: 6680ec68eff4 ("tuntap: hardware vlan tx support") Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 04:30:13 +08:00
net: rename vlan_tx_* helpers since "tx" is misleading there The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13 17:13:44 +01:00
tun: Fix csum_start with VLAN acceleration When VLAN acceleration is in use on the xmit path, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN acceleration is detected. Fixes: 6680ec68eff4 ("tuntap: hardware vlan tx support") Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 04:30:13 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: read vnet_hdr_sz once When IFF_VNET_HDR is enabled, a virtio_net header must precede data. Data length is verified to be greater than or equal to expected header length tun->vnet_hdr_sz before copying. Read this value once and cache locally, as it can be updated between the test and use (TOCTOU). Signed-off-by: Willem de Bruijn <willemb@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> CC: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:48 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Fix TUN_PKT_STRIP setting We set the flag TUN_PKT_STRIP if the user buffer provided is too small to contain the entire packet plus meta-data. However, this has been broken ever since we added GSO meta-data. VLAN acceleration also has the same problem. This patch fixes this by taking both into account when setting the TUN_PKT_STRIP flag. The fact that this has been broken for six years without anyone realising means that nobody actually uses this flag. Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 04:30:14 +08:00
virtio_net: Do not clear memory for struct virtio_net_hdr twice. virtio_net_hdr_from_skb() clears the memory for the header, so there is no point for the callers to do the same. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18 15:40:40 -08:00
tuntap: use common code for virtio_net_hdr and skb GSO conversion Replace open coded conversion between virtio_net_hdr to skb GSO info with virtio_net_hdr_{from,to}_skb Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 16:09:20 +03:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
tun: Allow GSO using virtio_net_hdr Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:48:02 -07:00
virtio_net: Simplify call sites for virtio_net_hdr_{from, to}_skb(). No point storing the return value of virtio_net_hdr_to_skb() or virtio_net_hdr_from_skb() to a variable when the value is used only once as a boolean in an immediately following if statement. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18 15:40:38 -08:00
virtio-net: restore VIRTIO_HDR_F_DATA_VALID on receiving Commit 501db511397f ("virtio: don't set VIRTIO_NET_HDR_F_DATA_VALID on xmit") in fact disables VIRTIO_HDR_F_DATA_VALID on receiving path too, fixing this by adding a hint (has_data_valid) and set it only on the receiving path. Cc: Rolf Neugebauer <rolf.neugebauer@docker.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Rolf Neugebauer <rolf.neugebauer@docker.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-20 14:32:42 +08:00
tun: Allow GSO using virtio_net_hdr Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:48:02 -07:00
tuntap: use common code for virtio_net_hdr and skb GSO conversion Replace open coded conversion between virtio_net_hdr to skb GSO info with virtio_net_hdr_{from,to}_skb Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 16:09:20 +03:00
tun: Allow GSO using virtio_net_hdr Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:48:02 -07:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
tun: Allow GSO using virtio_net_hdr Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:48:02 -07:00
tun: fix issues of iovec iterators using in tun_put_user() This patch fixes two issues after using iovec iterators: - vlan_offset should be initialized to zero, otherwise unexpected offset will be used in skb_copy_datagram_iter() - advance iovec iterator when vnet_hdr_sz is greater than sizeof(gso), this is the case when mergeable rx buffer were enabled for a virt guest. Fixes e0b46d0ee9c240c7430a47e9b0365674d4a04522 ("tun: Use iovec iterators") Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13 16:54:14 +08:00
tun: Allow GSO using virtio_net_hdr Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:48:02 -07:00
tun: Fix csum_start with VLAN acceleration When VLAN acceleration is in use on the xmit path, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN acceleration is detected. Fixes: 6680ec68eff4 ("tuntap: hardware vlan tx support") Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 04:30:13 +08:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
tuntap: hardware vlan tx support Inspired by commit f09e2249c4f5c7c13261ec73f5a7807076af0c8e (macvtap: restore vlan header on user read). This patch adds hardware vlan tx support for tuntap. This is done by copying vlan header directly into userspace in tun_put_user() instead of doing it through __vlan_put_tag() in dev_hard_start_xmit(). This eliminates one unnecessary memmove() in vlan_insert_tag() for 802.1ad and 802.1q traffic. pktgen test shows about 20% improvement for 802.1q traffic: Before: 662149pps 317Mb/sec (317831520bps) errors: 0 After: 801033pps 384Mb/sec (384495840bps) errors: 0 Cc: Basil Gor <basil.gor@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25 13:00:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: hardware vlan tx support Inspired by commit f09e2249c4f5c7c13261ec73f5a7807076af0c8e (macvtap: restore vlan header on user read). This patch adds hardware vlan tx support for tuntap. This is done by copying vlan header directly into userspace in tun_put_user() instead of doing it through __vlan_put_tag() in dev_hard_start_xmit(). This eliminates one unnecessary memmove() in vlan_insert_tag() for 802.1ad and 802.1q traffic. pktgen test shows about 20% improvement for 802.1q traffic: Before: 662149pps 317Mb/sec (317831520bps) errors: 0 After: 801033pps 384Mb/sec (384495840bps) errors: 0 Cc: Basil Gor <basil.gor@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25 13:00:33 +08:00
net: rename vlan_tx_* helpers since "tx" is misleading there The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13 17:13:44 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: hardware vlan tx support Inspired by commit f09e2249c4f5c7c13261ec73f5a7807076af0c8e (macvtap: restore vlan header on user read). This patch adds hardware vlan tx support for tuntap. This is done by copying vlan header directly into userspace in tun_put_user() instead of doing it through __vlan_put_tag() in dev_hard_start_xmit(). This eliminates one unnecessary memmove() in vlan_insert_tag() for 802.1ad and 802.1q traffic. pktgen test shows about 20% improvement for 802.1q traffic: Before: 662149pps 317Mb/sec (317831520bps) errors: 0 After: 801033pps 384Mb/sec (384495840bps) errors: 0 Cc: Basil Gor <basil.gor@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25 13:00:33 +08:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
tuntap: hardware vlan tx support Inspired by commit f09e2249c4f5c7c13261ec73f5a7807076af0c8e (macvtap: restore vlan header on user read). This patch adds hardware vlan tx support for tuntap. This is done by copying vlan header directly into userspace in tun_put_user() instead of doing it through __vlan_put_tag() in dev_hard_start_xmit(). This eliminates one unnecessary memmove() in vlan_insert_tag() for 802.1ad and 802.1q traffic. pktgen test shows about 20% improvement for 802.1q traffic: Before: 662149pps 317Mb/sec (317831520bps) errors: 0 After: 801033pps 384Mb/sec (384495840bps) errors: 0 Cc: Basil Gor <basil.gor@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25 13:00:33 +08:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
tuntap: hardware vlan tx support Inspired by commit f09e2249c4f5c7c13261ec73f5a7807076af0c8e (macvtap: restore vlan header on user read). This patch adds hardware vlan tx support for tuntap. This is done by copying vlan header directly into userspace in tun_put_user() instead of doing it through __vlan_put_tag() in dev_hard_start_xmit(). This eliminates one unnecessary memmove() in vlan_insert_tag() for 802.1ad and 802.1q traffic. pktgen test shows about 20% improvement for 802.1q traffic: Before: 662149pps 317Mb/sec (317831520bps) errors: 0 After: 801033pps 384Mb/sec (384495840bps) errors: 0 Cc: Basil Gor <basil.gor@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25 13:00:33 +08:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
tuntap: hardware vlan tx support Inspired by commit f09e2249c4f5c7c13261ec73f5a7807076af0c8e (macvtap: restore vlan header on user read). This patch adds hardware vlan tx support for tuntap. This is done by copying vlan header directly into userspace in tun_put_user() instead of doing it through __vlan_put_tag() in dev_hard_start_xmit(). This eliminates one unnecessary memmove() in vlan_insert_tag() for 802.1ad and 802.1q traffic. pktgen test shows about 20% improvement for 802.1q traffic: Before: 662149pps 317Mb/sec (317831520bps) errors: 0 After: 801033pps 384Mb/sec (384495840bps) errors: 0 Cc: Basil Gor <basil.gor@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25 13:00:33 +08:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun: fix build warnings Stephen Rothwell reports a build warnings(powerpc ppc64_defconfig) drivers/net/tun.c: In function 'tun_do_read.part.5': /home/sfr/next/next/drivers/net/tun.c:1491:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] int err; This is because tun_ring_recv() may return an uninitialized err, fix this. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04 13:53:38 +08:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun: fix build warnings Stephen Rothwell reports a build warnings(powerpc ppc64_defconfig) drivers/net/tun.c: In function 'tun_do_read.part.5': /home/sfr/next/next/drivers/net/tun.c:1491:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] int err; This is because tun_ring_recv() may return an uninitialized err, fix this. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04 13:53:38 +08:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun: fix build warnings Stephen Rothwell reports a build warnings(powerpc ppc64_defconfig) drivers/net/tun.c: In function 'tun_do_read.part.5': /home/sfr/next/next/drivers/net/tun.c:1491:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] int err; This is because tun_ring_recv() may return an uninitialized err, fix this. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04 13:53:38 +08:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun: fix build warnings Stephen Rothwell reports a build warnings(powerpc ppc64_defconfig) drivers/net/tun.c: In function 'tun_do_read.part.5': /home/sfr/next/next/drivers/net/tun.c:1491:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] int err; This is because tun_ring_recv() may return an uninitialized err, fix this. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04 13:53:38 +08:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun: fix build warnings Stephen Rothwell reports a build warnings(powerpc ppc64_defconfig) drivers/net/tun.c: In function 'tun_do_read.part.5': /home/sfr/next/next/drivers/net/tun.c:1491:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] int err; This is because tun_ring_recv() may return an uninitialized err, fix this. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04 13:53:38 +08:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
switch drivers/net/tun.c to ->read_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-07 13:52:07 -05:00
tun: support receiving skb through msg_control This patch makes tun_recvmsg() can receive from skb from its caller through msg_control. Vhost_net will be the first user. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17 12:14:43 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
switch drivers/net/tun.c to ->read_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-07 13:52:07 -05:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: put correct method name in a debug message. This patch puts the correct method name, tun_do_read, in a debug message. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-25 22:07:41 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: free skb in early errors [ Upstream commit c33ee15b3820a03cf8229ba9415084197b827f8c ] tun_recvmsg() supports accepting skb by msg_control after commit ac77cfd4258f ("tun: support receiving skb through msg_control"), the skb if presented should be freed no matter how far it can go along, otherwise it would be leaked. This patch fixes several missed cases. Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-01 05:10:37 -05:00
switch drivers/net/tun.c to ->read_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-07 13:52:07 -05:00
tun: free skb in early errors [ Upstream commit c33ee15b3820a03cf8229ba9415084197b827f8c ] tun_recvmsg() supports accepting skb by msg_control after commit ac77cfd4258f ("tun: support receiving skb through msg_control"), the skb if presented should be freed no matter how far it can go along, otherwise it would be leaked. This patch fixes several missed cases. Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-01 05:10:37 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: support receiving skb through msg_control This patch makes tun_recvmsg() can receive from skb from its caller through msg_control. Vhost_net will be the first user. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17 12:14:43 +08:00
tun: Use iovec iterators This patch removes the use of skb_copy_datagram_const_iovec in favour of the iovec iterator-based skb_copy_datagram_iter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07 21:22:23 +08:00
switch drivers/net/tun.c to ->read_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-07 13:52:07 -05:00
tun/macvtap: use consume_skb() instead of kfree_skb() when needed To be more friendly with drop monitor, we should only call kfree_skb() when the packets were dropped and use consume_skb() in other cases. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-01 16:53:15 +08:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
tun/macvtap: use consume_skb() instead of kfree_skb() when needed To be more friendly with drop monitor, we should only call kfree_skb() when the packets were dropped and use consume_skb() in other cases. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-01 16:53:15 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
switch drivers/net/tun.c to ->read_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-07 13:52:07 -05:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
switch drivers/net/tun.c to ->read_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-07 13:52:07 -05:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tun: support receiving skb through msg_control This patch makes tun_recvmsg() can receive from skb from its caller through msg_control. Vhost_net will be the first user. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17 12:14:43 +08:00
Revert "tun: remove useless codes in tun_chr_aio_read() and tun_recvmsg()" This reverts commit 73713357ab58aacda1af715bb5a623528dbbfd79. MSG_TRUNC handling was broken and is going to be fixed in the 'net' tree, so revert this. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 22:05:45 -05:00
tun: update file current position Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 14:16:51 +08:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tun: fix LSM/SELinux labeling of tun/tap devices This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@parisplace.org> Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14 07:12:19 +00:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
userns: Convert tun/tap to use kuid and kgid where appropriate Cc: Maxim Krasnyansky <maxk@qualcomm.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-02-07 16:48:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: Fix inconsistent teardown and release of private netdev state. Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08 12:52:56 -04:00
tuntap: restore default qdisc After commit f84bb1eac027 ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev"), default qdisc was changed to noqueue because tuntap does not set tx_queue_len during .setup(). This patch restores default qdisc by setting tx_queue_len in tun_setup(). Fixes: f84bb1eac027 ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev") Cc: Phil Sutter <phil@nwl.cc> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08 13:26:48 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Implement ip link del tunXXX This greatly simplifies testing to verify I have fixed the problems with a tun device disappearing when the tun file descriptor is still held open. Further it allows removal network namespace operations for the tun driver. Reducing the network namespace handling in the driver to the minimum. i.e. When we are creating a tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 16:02:16 -08:00
net: add netlink_ext_ack argument to rtnl_link_ops.validate Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25 23:56:01 +02:00
tun: Implement ip link del tunXXX This greatly simplifies testing to verify I have fixed the problems with a tun device disappearing when the tun file descriptor is still held open. Further it allows removal network namespace operations for the tun driver. Reducing the network namespace handling in the driver to the minimum. i.e. When we are creating a tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 16:02:16 -08:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
net: sock_def_readable() and friends RCU conversion sk_callback_lock rwlock actually protects sk->sk_sleep pointer, so we need two atomic operations (and associated dirtying) per incoming packet. RCU conversion is pretty much needed : 1) Add a new structure, called "struct socket_wq" to hold all fields that will need rcu_read_lock() protection (currently: a wait_queue_head_t and a struct fasync_struct pointer). [Future patch will add a list anchor for wakeup coalescing] 2) Attach one of such structure to each "struct socket" created in sock_alloc_inode(). 3) Respect RCU grace period when freeing a "struct socket_wq" 4) Change sk_sleep pointer in "struct sock" by sk_wq, pointer to "struct socket_wq" 5) Change sk_sleep() function to use new sk->sk_wq instead of sk->sk_sleep 6) Change sk_has_sleeper() to wq_has_sleeper() that must be used inside a rcu_read_lock() section. 7) Change all sk_has_sleeper() callers to : - Use rcu_read_lock() instead of read_lock(&sk->sk_callback_lock) - Use wq_has_sleeper() to eventually wakeup tasks. - Use rcu_read_unlock() instead of read_unlock(&sk->sk_callback_lock) 8) sock_wake_async() is modified to use rcu protection as well. 9) Exceptions : macvtap, drivers/net/tun.c, af_unix use integrated "struct socket_wq" instead of dynamically allocated ones. They dont need rcu freeing. Some cleanups or followups are probably needed, (possible sk_callback_lock conversion to a spinlock for example...). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-29 11:01:49 +00:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA This patch is a cleanup to make following patch easier to review. Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA from (struct socket)->flags to a (struct socket_wq)->flags to benefit from RCU protection in sock_wake_async() To ease backports, we rename both constants. Two new helpers, sk_set_bit(int nr, struct sock *sk) and sk_clear_bit(int net, struct sock *sk) are added so that following patch can change their implementation. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-29 20:03:10 -08:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
net: sock_def_readable() and friends RCU conversion sk_callback_lock rwlock actually protects sk->sk_sleep pointer, so we need two atomic operations (and associated dirtying) per incoming packet. RCU conversion is pretty much needed : 1) Add a new structure, called "struct socket_wq" to hold all fields that will need rcu_read_lock() protection (currently: a wait_queue_head_t and a struct fasync_struct pointer). [Future patch will add a list anchor for wakeup coalescing] 2) Attach one of such structure to each "struct socket" created in sock_alloc_inode(). 3) Respect RCU grace period when freeing a "struct socket_wq" 4) Change sk_sleep pointer in "struct sock" by sk_wq, pointer to "struct socket_wq" 5) Change sk_sleep() function to use new sk->sk_wq instead of sk->sk_sleep 6) Change sk_has_sleeper() to wq_has_sleeper() that must be used inside a rcu_read_lock() section. 7) Change all sk_has_sleeper() callers to : - Use rcu_read_lock() instead of read_lock(&sk->sk_callback_lock) - Use wq_has_sleeper() to eventually wakeup tasks. - Use rcu_read_unlock() instead of read_unlock(&sk->sk_callback_lock) 8) sock_wake_async() is modified to use rcu protection as well. 9) Exceptions : macvtap, drivers/net/tun.c, af_unix use integrated "struct socket_wq" instead of dynamically allocated ones. They dont need rcu freeing. Some cleanups or followups are probably needed, (possible sk_callback_lock conversion to a spinlock for example...). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-29 11:01:49 +00:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tun: Only wake up writers When I added socket accounting to tun I inadvertently introduced spurious wake-up events that kills qemu performance. The problem occurs when qemu polls on the tun fd for read, and then transmits packets. For each packet transmitted, we will wake up qemu even if it only cares about read events. Now this affects all sockets, but it is only a new problem for tun. So this patch tries to fix it for tun first and we can then look at the problem in general. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03 21:45:55 -07:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
net: Remove iocb argument from sendmsg and recvmsg After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 15:37:48 +08:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
{macvtap,tun}_get_user(): switch to iov_iter allows to switch macvtap and tun from ->aio_write() to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-19 15:36:49 -04:00
put iov_iter into msghdr Note that the code _using_ ->msg_iter at that point will be very unhappy with anything other than unshifted iovec-backed iov_iter. We still need to convert users to proper primitives. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-24 10:42:55 -05:00
tun: rx batching We can only process 1 packet at one time during sendmsg(). This often lead bad cache utilization under heavy load. So this patch tries to do some batching during rx before submitting them to host network stack. This is done through accepting MSG_MORE as a hint from sendmsg() caller, if it was set, batch the packet temporarily in a linked list and submit them all once MSG_MORE were cleared. Tests were done by pktgen (burst=128) in guest over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% User were allowed to change per device batched packets through ethtool -C rx-frames. NAPI_POLL_WEIGHT were used as upper limitation to prevent bh from being disabled too long. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 15:02:03 +08:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
net: Remove iocb argument from sendmsg and recvmsg After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 15:37:48 +08:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: free skb in early errors [ Upstream commit c33ee15b3820a03cf8229ba9415084197b827f8c ] tun_recvmsg() supports accepting skb by msg_control after commit ac77cfd4258f ("tun: support receiving skb through msg_control"), the skb if presented should be freed no matter how far it can go along, otherwise it would be leaked. This patch fixes several missed cases. Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-01 05:10:37 -05:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: free skb in early errors [ Upstream commit c33ee15b3820a03cf8229ba9415084197b827f8c ] tun_recvmsg() supports accepting skb by msg_control after commit ac77cfd4258f ("tun: support receiving skb through msg_control"), the skb if presented should be freed no matter how far it can go along, otherwise it would be leaked. This patch fixes several missed cases. Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-01 05:10:37 -05:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: Support software transmit time stamping. This patch adds transmit time stamping to the tun/tap driver. Similar support already exists for UDP, can, and raw packets. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-19 19:40:10 +02:00
net: tun: release the reference of tun device in tun_recvmsg We forget to release the reference of tun device in tun_recvmsg. bug introduced in commit 54f968d6efdbf7dec36faa44fc11f01b0e4d1990 (tuntap: move socket to tun_file) Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24 21:59:23 +00:00
tun: free skb in early errors [ Upstream commit c33ee15b3820a03cf8229ba9415084197b827f8c ] tun_recvmsg() supports accepting skb by msg_control after commit ac77cfd4258f ("tun: support receiving skb through msg_control"), the skb if presented should be freed no matter how far it can go along, otherwise it would be leaked. This patch fixes several missed cases. Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-01 05:10:37 -05:00
net: tun: release the reference of tun device in tun_recvmsg We forget to release the reference of tun device in tun_recvmsg. bug introduced in commit 54f968d6efdbf7dec36faa44fc11f01b0e4d1990 (tuntap: move socket to tun_file) Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24 21:59:23 +00:00
tun: Support software transmit time stamping. This patch adds transmit time stamping to the tun/tap driver. Similar support already exists for UDP, can, and raw packets. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-19 19:40:10 +02:00
tun: free skb in early errors [ Upstream commit c33ee15b3820a03cf8229ba9415084197b827f8c ] tun_recvmsg() supports accepting skb by msg_control after commit ac77cfd4258f ("tun: support receiving skb through msg_control"), the skb if presented should be freed no matter how far it can go along, otherwise it would be leaked. This patch fixes several missed cases. Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-01 05:10:37 -05:00
tun: Fixed unsigned/signed comparison Validated that this was actually using the unsigned comparison with gdb. Signed-off-by: Alex Gartrell <agartrell@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-25 23:05:03 -08:00
Revert "tun: remove useless codes in tun_chr_aio_read() and tun_recvmsg()" This reverts commit 73713357ab58aacda1af715bb5a623528dbbfd79. MSG_TRUNC handling was broken and is going to be fixed in the 'net' tree, so revert this. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 22:05:45 -05:00
net: tun: release the reference of tun device in tun_recvmsg We forget to release the reference of tun device in tun_recvmsg. bug introduced in commit 54f968d6efdbf7dec36faa44fc11f01b0e4d1990 (tuntap: move socket to tun_file) Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24 21:59:23 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tun: free skb in early errors [ Upstream commit c33ee15b3820a03cf8229ba9415084197b827f8c ] tun_recvmsg() supports accepting skb by msg_control after commit ac77cfd4258f ("tun: support receiving skb through msg_control"), the skb if presented should be freed no matter how far it can go along, otherwise it would be leaked. This patch fixes several missed cases. Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-01 05:10:37 -05:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tun: Implement ip link del tunXXX This greatly simplifies testing to verify I have fixed the problems with a tun device disappearing when the tun file descriptor is still held open. Further it allows removal network namespace operations for the tun driver. Reducing the network namespace handling in the driver to the minimum. i.e. When we are creating a tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 16:02:16 -08:00
tun: add tun_flags, owner, group attributes in sysfs This patch adds three attribute files in /sys/class/net/$dev/ for tun devices; allowing userspace to obtain the information which TUNGETIFF offers, and more, but without having to attach to the device in question (which may not be possible if it's in use). It also fixes a bug which has been present in the TUNGETIFF ioctl since its inception, where it would never set IFF_TUN or IFF_TAP according to the device type. (Look carefully at the code which I remove from tun_get_iff() and how the new tun_flags() helper is subtly different). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-09 22:54:21 -07:00
tun: move internal flag defines out of uapi TUN_ flags are internal and never exposed to userspace. Any application using it is almost certainly buggy. Move them out to tun.c. Note: we remove these completely in follow-up patches, this code movement is split out for ease of review. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 14:44:40 +02:00
tun: add tun_flags, owner, group attributes in sysfs This patch adds three attribute files in /sys/class/net/$dev/ for tun devices; allowing userspace to obtain the information which TUNGETIFF offers, and more, but without having to attach to the device in question (which may not be possible if it's in use). It also fixes a bug which has been present in the TUNGETIFF ioctl since its inception, where it would never set IFF_TUN or IFF_TAP according to the device type. (Look carefully at the code which I remove from tun_get_iff() and how the new tun_flags() helper is subtly different). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-09 22:54:21 -07:00
userns: Convert tun/tap to use kuid and kgid where appropriate Cc: Maxim Krasnyansky <maxk@qualcomm.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-02-07 16:48:55 -08:00
tun: add tun_flags, owner, group attributes in sysfs This patch adds three attribute files in /sys/class/net/$dev/ for tun devices; allowing userspace to obtain the information which TUNGETIFF offers, and more, but without having to attach to the device in question (which may not be possible if it's in use). It also fixes a bug which has been present in the TUNGETIFF ioctl since its inception, where it would never set IFF_TUN or IFF_TAP according to the device type. (Look carefully at the code which I remove from tun_get_iff() and how the new tun_flags() helper is subtly different). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-09 22:54:21 -07:00
userns: Convert tun/tap to use kuid and kgid where appropriate Cc: Maxim Krasnyansky <maxk@qualcomm.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-02-07 16:48:55 -08:00
tun: add tun_flags, owner, group attributes in sysfs This patch adds three attribute files in /sys/class/net/$dev/ for tun devices; allowing userspace to obtain the information which TUNGETIFF offers, and more, but without having to attach to the device in question (which may not be possible if it's in use). It also fixes a bug which has been present in the TUNGETIFF ioctl since its inception, where it would never set IFF_TUN or IFF_TAP according to the device type. (Look carefully at the code which I remove from tun_get_iff() and how the new tun_flags() helper is subtly different). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-09 22:54:21 -07:00
tun: Use static attribute groups for sysfs entries Instead of manual calls of device_create_file() and device_remove_files(), assign the static attribute groups to netdev groups array. This simplifies the code and avoids the possible races. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04 14:37:34 +01:00
[TUN]: Make the tun_dev_list per-net. Remove the static tun_dev_list and replace its occurrences in driver with per-net one. It is used in two places - in tun_set_iff and tun_cleanup. In the first case it's legal to use current net_ns. In the cleanup call - move the loop, that unregisters all devices in net exit hook. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 00:41:16 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: forbid calling TUNSETIFF when detached Michael points out that even after Stefan's fix the TUNSETIFF is still allowed to create a new tap device. This because we only check tfile->tun but the tfile->detached were introduced. Fix this by failing early in tun_set_iff() if the file is detached. After this fix, there's no need to do the check again in tun_set_iff(), so this patch removes it. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:33 +00:00
tun: Remove unnecessary tun_get_by_name Currently the tun driver keeps a private list of tun devices for what appears to be a small gain in performance when reconnecting a file descriptor to an existing tun or tap device. So simplify the code by removing it. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 10:56:20 +00:00
tun: add IFF_TUN_EXCL flag to avoid opening a persistent device. When creating a certain types of VPN, NetworkManager will first attempt to find an available tun device by iterating through 'vpn%d' until it finds one that isn't already busy. Then it'll set that to be persistent and owned by the otherwise unprivileged user that the VPN dæmon itself runs as. There's a race condition here -- during the period where the vpn%d device is created and we're waiting for the VPN dæmon to actually connect and use it, if we try to create _another_ device we could end up re-using the same one -- because trying to open it again doesn't get -EBUSY as it would while it's _actually_ busy. So solve this, we add an IFF_TUN_EXCL flag which causes tun_set_iff() to fail if it would be opening an existing persistent tundevice -- so that we can make sure we're getting an entirely _new_ device. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27 03:23:54 -07:00
tun: Remove unnecessary tun_get_by_name Currently the tun driver keeps a private list of tun devices for what appears to be a small gain in performance when reconnecting a file descriptor to an existing tun or tap device. So simplify the code by removing it. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 10:56:20 +00:00
tuntap: forbid changing mq flag for persistent device We currently allow changing the mq flag (IFF_MULTI_QUEUE) for a persistent device. This will result a mismatch between the number the queues in netdev and tuntap. This is because we only allocate a 1q netdevice when IFF_MULTI_QUEUE was not specified, so when we set the IFF_MULTI_QUEUE and try to attach more queues later, netif_set_real_num_tx_queues() may fail which result a single queue netdevice with multiple sockets attached. Solve this by disallowing changing the mq flag for persistent device. Bug was introduced by commit edfb6a148ce62e5e19354a1dcd9a34e00815c2a1 (tuntap: reduce memory using of queues). Reported-by: Sriram Narasimhan <sriram.narasimhan@hp.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28 18:32:11 +00:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tuntap: forbid changing mq flag for persistent device We currently allow changing the mq flag (IFF_MULTI_QUEUE) for a persistent device. This will result a mismatch between the number the queues in netdev and tuntap. This is because we only allocate a 1q netdevice when IFF_MULTI_QUEUE was not specified, so when we set the IFF_MULTI_QUEUE and try to attach more queues later, netif_set_real_num_tx_queues() may fail which result a single queue netdevice with multiple sockets attached. Solve this by disallowing changing the mq flag for persistent device. Bug was introduced by commit edfb6a148ce62e5e19354a1dcd9a34e00815c2a1 (tuntap: reduce memory using of queues). Reported-by: Sriram Narasimhan <sriram.narasimhan@hp.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28 18:32:11 +00:00
tuntap: add ioctl to attach or detach a file form tuntap device Sometimes usespace may need to active/deactive a queue, this could be done by detaching and attaching a file from tuntap device. This patch introduces a new ioctls - TUNSETQUEUE which could be used to do this. Flag IFF_ATTACH_QUEUE were introduced to do attaching while IFF_DETACH_QUEUE were introduced to do the detaching. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:01 +00:00
lsm: Add hooks to the TUN driver The TUN driver lacks any LSM hooks which makes it difficult for LSM modules, such as SELinux, to enforce access controls on network traffic generated by TUN users; this is particularly problematic for virtualization apps such as QEMU and KVM. This patch adds three new LSM hooks designed to control the creation and attachment of TUN devices, the hooks are: * security_tun_dev_create() Provides access control for the creation of new TUN devices * security_tun_dev_post_create() Provides the ability to create the necessary socket LSM state for newly created TUN devices * security_tun_dev_attach() Provides access control for attaching to existing, persistent TUN devices and the ability to update the TUN device's socket LSM state as necessary Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Eric Paris <eparis@parisplace.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-28 18:12:43 -04:00
tun: fix LSM/SELinux labeling of tun/tap devices This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@parisplace.org> Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14 07:12:19 +00:00
lsm: Add hooks to the TUN driver The TUN driver lacks any LSM hooks which makes it difficult for LSM modules, such as SELinux, to enforce access controls on network traffic generated by TUN users; this is particularly problematic for virtualization apps such as QEMU and KVM. This patch adds three new LSM hooks designed to control the creation and attachment of TUN devices, the hooks are: * security_tun_dev_create() Provides access control for the creation of new TUN devices * security_tun_dev_post_create() Provides the ability to create the necessary socket LSM state for newly created TUN devices * security_tun_dev_attach() Provides access control for attaching to existing, persistent TUN devices and the ability to update the TUN device's socket LSM state as necessary Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Eric Paris <eparis@parisplace.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-28 18:12:43 -04:00
tun: Allow to skip filter on attach There's a small problem with sk-filters on tun devices. Consider an application doing this sequence of steps: fd = open("/dev/net/tun"); ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" }); ioctl(fd, TUNATTACHFILTER, &my_filter); ioctl(fd, TUNSETPERSIST, 1); close(fd); At that point the tun0 will remain in the system and will keep in mind that there should be a socket filter at address '&my_filter'. If after that we do fd = open("/dev/net/tun"); ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" }); we most likely receive the -EFAULT error, since tun_attach() would try to connect the filter back. But (!) if we provide a filter at address &my_filter, then tun0 will be created and the "new" filter would be attached, but application may not know about that. This may create certain problems to anyone using tun-s, but it's critical problem for c/r -- if we meet a persistent tun device with a filter in mind, we will not be able to attach to it to dump its state (flags, owner, address, vnethdr size, etc.). The proposal is to allow to attach to tun device (with TUNSETIFF) w/o attaching the filter to the tun-file's socket. After this attach app may e.g clean the device by dropping the filter, it doesn't want to have one, or (in case of c/r) get information about the device with tun ioctls. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:32:21 +04:00
tun: Fix races in tun_set_iff It is possible for two different tasks with access to the same file descriptor to call tun_set_iff on it at the same time and race to attach to a tap device. Prevent this by placing all of the logic to attach to a file descriptor in one function and testing the file descriptor to be certain it is not already attached to another tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 10:57:48 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tuntap: correct the return value in tun_set_iff() commit (3be8fbab tuntap: fix error return code in tun_set_iff()) breaks the creation of multiqueue tuntap since it forbids to create more than one queues for a multiqueue tuntap device. We need return 0 instead -EBUSY here since we don't want to re-initialize the device when one or more queues has been already attached. Add a comment and correct the return value to zero. Reported-by: Jerry Chu <hkchu@google.com> Cc: Jerry Chu <hkchu@google.com> Cc: Wei Yongjun <weiyj.lk@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Jerry Chu <hkchu@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22 20:40:39 +00:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: reduce memory using of queues A MAX_TAP_QUEUES(1024) queues of tuntap device is always allocated unconditionally even userspace only requires a single queue device. This is unnecessary and will lead a very high order of page allocation when has a high possibility to fail. Solving this by creating a one queue net device when userspace only use one queue and also reduce MAX_TAP_QUEUES to DEFAULT_MAX_NUM_RSS_QUEUES which can guarantee the success of the allocation. Reported-by: Dirk Hohndel <dirk@hohndel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23 03:59:12 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: Allow userns root to control tun and tap devices Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) calls to ns_capable(net->user_ns,CAP_NET_ADMIN) calls. Allow setting of the tun iff flags. Allow creating of tun devices. Allow adding a new queue to a tun device. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 21:34:11 +00:00
[NET]: Require CAP_NET_ADMIN to create tuntap devices. The tuntap driver allows an admin to create persistent devices and assign ownership of them to individual users. Unfortunately, relaxing the permissions on the /dev/net/tun device node so that they can actually use those devices will _also_ allow those users to create arbitrary new devices of their own. This patch corrects that, and adjusts the recommended permissions for the device node accordingly. Signed-off-By: David Woodhouse <dwmw2@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 16:07:52 -07:00
lsm: Add hooks to the TUN driver The TUN driver lacks any LSM hooks which makes it difficult for LSM modules, such as SELinux, to enforce access controls on network traffic generated by TUN users; this is particularly problematic for virtualization apps such as QEMU and KVM. This patch adds three new LSM hooks designed to control the creation and attachment of TUN devices, the hooks are: * security_tun_dev_create() Provides access control for the creation of new TUN devices * security_tun_dev_post_create() Provides the ability to create the necessary socket LSM state for newly created TUN devices * security_tun_dev_attach() Provides access control for attaching to existing, persistent TUN devices and the ability to update the TUN device's socket LSM state as necessary Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Eric Paris <eparis@parisplace.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-28 18:12:43 -04:00
[NET]: Require CAP_NET_ADMIN to create tuntap devices. The tuntap driver allows an admin to create persistent devices and assign ownership of them to individual users. Unfortunately, relaxing the permissions on the /dev/net/tun device node so that they can actually use those devices will _also_ allow those users to create arbitrary new devices of their own. This patch corrects that, and adjusts the recommended permissions for the device node accordingly. Signed-off-By: David Woodhouse <dwmw2@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 16:07:52 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
tun: Return -EINVAL if neither IFF_TUN nor IFF_TAP is set. After commit 2b980dbd77d229eb60588802162c9659726b11f4 ("lsm: Add hooks to the TUN driver") tun_set_iff doesn't return -EINVAL though neither IFF_TUN nor IFF_TAP is set. Signed-off-by: Kusanagi Kouichi <slash@ma.neweb.ne.jp> Reviewed-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 21:36:13 +00:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
net: set name_assign_type in alloc_netdev() Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14 16:37:24 +02:00
tuntap: reduce memory using of queues A MAX_TAP_QUEUES(1024) queues of tuntap device is always allocated unconditionally even userspace only requires a single queue device. This is unnecessary and will lead a very high order of page allocation when has a high possibility to fail. Solving this by creating a one queue net device when userspace only use one queue and also reduce MAX_TAP_QUEUES to DEFAULT_MAX_NUM_RSS_QUEUES which can guarantee the success of the allocation. Reported-by: Dirk Hohndel <dirk@hohndel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23 03:59:12 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: call dev_get_valid_name() before register_netdevice() register_netdevice() could fail early when we have an invalid dev name, in which case ->ndo_uninit() is not called. For tun device, this is a problem because a timer etc. are already initialized and it expects ->ndo_uninit() to clean them up. We could move these initializations into a ->ndo_init() so that register_netdevice() knows better, however this is still complicated due to the logic in tun_detach(). Therefore, I choose to just call dev_get_valid_name() before register_netdevice(), which is quicker and much easier to audit. And for this specific case, it is already enough. Fixes: 96442e42429e ("tuntap: choose the txq based on rxq") Reported-by: Dmitry Alexeev <avekceeb@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-13 11:58:53 -07:00
tun: allow positive return values on dev_get_valid_name() call If the name argument of dev_get_valid_name() contains "%d", it will try to assign it a unit number in __dev__alloc_name() and return either the unit number (>= 0) or an error code (< 0). Considering positive values as error values prevent tun device creations relying this mechanism, therefor we should only consider negative values as errors here. Signed-off-by: Julien Gomes <julien@arista.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25 11:50:50 -07:00
tun: call dev_get_valid_name() before register_netdevice() register_netdevice() could fail early when we have an invalid dev name, in which case ->ndo_uninit() is not called. For tun device, this is a problem because a timer etc. are already initialized and it expects ->ndo_uninit() to clean them up. We could move these initializations into a ->ndo_init() so that register_netdevice() knows better, however this is still complicated due to the logic in tun_detach(). Therefore, I choose to just call dev_get_valid_name() before register_netdevice(), which is quicker and much easier to audit. And for this specific case, it is already enough. Fixes: 96442e42429e ("tuntap: choose the txq based on rxq") Reported-by: Dmitry Alexeev <avekceeb@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-13 11:58:53 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[TUN]: Allow to register tun devices in namespace. This is basically means that a net is set for a new device, but actually also involves two more steps: 1. mark the tun device as "local", i.e. do not allow for it to move across namespaces. This is done so, since tun device is most often associated to some file (and thus to some process) and moving the device alone is not valid while keeping the file and the process outside. The need in ability to move a detached persistent device is to be investigated later. 2. get the tun device's net when tun becomes attached and put one when it becomes detached. This is needed to handle the case when a task owning the tun dies, but a files lives for some more time - in this case we must not allow for net to be freed, since its exit hook will spoil that file's private data by unregistering the tun from under tun_chr_close. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 00:41:53 -07:00
tun: Implement ip link del tunXXX This greatly simplifies testing to verify I have fixed the problems with a tun device disappearing when the tun file descriptor is still held open. Further it allows removal network namespace operations for the tun driver. Reducing the network namespace handling in the driver to the minimum. i.e. When we are creating a tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 16:02:16 -08:00
tun: Add ability to create tun device with given index Tun devices cannot be created with ifidex user wants, but it's required by checkpoint-restore project. Long time ago such ability was implemented for rtnl_ops-based interface for creating links (9c7dafbf net: Allow to create links with given ifindex), but the only API for creating and managing tuntap devices is ioctl-based and is evolving with adding new ones (cde8b15f tuntap: add ioctl to attach or detach a file form tuntap device). Following that trend, here's how a new ioctl that sets the ifindex for device, that _will_ be created by TUNSETIFF ioctl looks like. So those who want a tuntap device with the ifindex N, should open the tun device, call ioctl(fd, TUNSETIFINDEX, &N), then call TUNSETIFF. If the index N is busy, then the register_netdev will find this out and the ioctl would be failed with -EBUSY. If setifindex is not called, then it will be generated as before. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:31:38 +04:00
tun: Use static attribute groups for sysfs entries Instead of manual calls of device_create_file() and device_remove_files(), assign the static attribute groups to netdev groups array. This simplifies the code and avoids the possible races. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04 14:37:34 +01:00
tun: convert to net_device_ops Convert the TUN/TAP tunnel driver to net_device_ops. Split the ops in two, and retain compatability. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 22:10:37 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
tun: add ioctl to modify vnet header size virtio added mergeable buffers mode where 2 bytes of extra info is put after vnet header but before actual data (tun does not need this data). In hindsight, it would have been better to add the new info *before* the packet: as it is, users need a lot of tricky code to skip the extra 2 bytes in the middle of the iovec, and in fact applications seem to get it wrong, and only work with specific iovec layout. The fact we might need to split iovec also means we might in theory overflow iovec max size. This patch adds a simpler way for applications to handle this, and future proofs the interface against further extensions, by making the size of the virtio net header configurable from userspace. As a result, tun driver will simply skip the extra 2 bytes on both input and output. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David S. Miller <davem@davemloft.net>
2010-03-17 17:45:01 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net/tun: implement ndo_set_rx_headroom ndo_set_rx_headroom controls the align value used by tun devices to allocate skbs on frame reception. When the xmit device adds a large encapsulation, this avoids an skb head reallocation on forwarding. The measured improvement when forwarding towards a vxlan dev with frame size below the egress device MTU is as follow: vxlan over ipv6, bridged: +6% vxlan over ipv6, ovs: +7% In case of ipv4 tunnels there is no improvement, since the tun device default alignment provides enough headroom to avoid the skb head reallocation. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26 10:45:40 +01:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: rx batching We can only process 1 packet at one time during sendmsg(). This often lead bad cache utilization under heavy load. So this patch tries to do some batching during rx before submitting them to host network stack. This is done through accepting MSG_MORE as a hint from sendmsg() caller, if it was set, batch the packet temporarily in a linked list and submit them all once MSG_MORE were cleared. Tests were done by pktgen (burst=128) in guest over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% User were allowed to change per device batched packets through ethtool -C rx-frames. NAPI_POLL_WEIGHT were used as upper limitation to prevent bh from being disabled too long. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 15:02:03 +08:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
tun: fix LSM/SELinux labeling of tun/tap devices This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@parisplace.org> Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14 07:12:19 +00:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
lsm: Add hooks to the TUN driver The TUN driver lacks any LSM hooks which makes it difficult for LSM modules, such as SELinux, to enforce access controls on network traffic generated by TUN users; this is particularly problematic for virtualization apps such as QEMU and KVM. This patch adds three new LSM hooks designed to control the creation and attachment of TUN devices, the hooks are: * security_tun_dev_create() Provides access control for the creation of new TUN devices * security_tun_dev_post_create() Provides the ability to create the necessary socket LSM state for newly created TUN devices * security_tun_dev_attach() Provides access control for attaching to existing, persistent TUN devices and the ability to update the TUN device's socket LSM state as necessary Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Eric Paris <eparis@parisplace.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-28 18:12:43 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Turn tun_flow_init() into void fn This routine doesn't fail since 9fdc6bef (tuntap: dont use a private kmem_cache) so it makes sense to compact the code a little bit. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11 17:01:08 +04:00
tuntap: choose the txq based on rxq This patch implements a simple multiqueue flow steering policy - tx follows rx for tun/tap. The idea is simple, it just choose the txq based on which rxq it comes. The flow were identified through the rxhash of a skb, and the hash to queue mapping were recorded in a hlist with an ageing timer to retire the mapping. The mapping were created when tun receives packet from userspace, and was quired in .ndo_select_queue(). I run co-current TCP_CRR test and didn't see any mapping manipulation helpers in perf top, so the overhead could be negelected. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:02 +00:00
net: tun: convert to hw_features This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 06:13:10 +00:00
tuntap: hardware vlan tx support Inspired by commit f09e2249c4f5c7c13261ec73f5a7807076af0c8e (macvtap: restore vlan header on user read). This patch adds hardware vlan tx support for tuntap. This is done by copying vlan header directly into userspace in tun_put_user() instead of doing it through __vlan_put_tag() in dev_hard_start_xmit(). This eliminates one unnecessary memmove() in vlan_insert_tag() for 802.1ad and 802.1q traffic. pktgen test shows about 20% improvement for 802.1q traffic: Before: 662149pps 317Mb/sec (317831520bps) errors: 0 After: 801033pps 384Mb/sec (384495840bps) errors: 0 Cc: Basil Gor <basil.gor@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25 13:00:33 +08:00
tun: don't require serialization lock on tx The current tun_net_xmit() implementation don't need any external lock since it relies on rcu protection for the tun data structure and on socket queue lock for skb queuing. This patch set the NETIF_F_LLTX feature bit in the tun device, so that on xmit, in absence of qdisc, no serialization lock is acquired by the caller. The user space can remove the default tun qdisc with: tc qdisc replace dev <tun device name> root noqueue Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 18:39:39 +02:00
tun: remove bogus hardware vlan acceleration flags from vlan_features Even though only the outer vlan tag can be HW accelerated in the transmission path, in the TUN/TAP driver vlan_features mirrors hw_features, which happens to have the NETIF_F_HW_VLAN_?TAG_TX flags set. Because of this, during packet tranmisssion through a stacked vlan device dev_hard_start_xmit, (incorrectly) assuming that the vlan device supports hardware vlan acceleration, does not add the vlan header to the skb payload and the inner vlan tags are lost (vlan_tci contains the outer vlan tag when userspace reads the packet from the tap device). Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 21:20:09 +09:00
net: tun: convert to hw_features This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 06:13:10 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tun: Allow to skip filter on attach There's a small problem with sk-filters on tun devices. Consider an application doing this sequence of steps: fd = open("/dev/net/tun"); ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" }); ioctl(fd, TUNATTACHFILTER, &my_filter); ioctl(fd, TUNSETPERSIST, 1); close(fd); At that point the tun0 will remain in the system and will keep in mind that there should be a socket filter at address '&my_filter'. If after that we do fd = open("/dev/net/tun"); ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" }); we most likely receive the -EFAULT error, since tun_attach() would try to connect the filter back. But (!) if we provide a filter at address &my_filter, then tun0 will be created and the "new" filter would be attached, but application may not know about that. This may create certain problems to anyone using tun-s, but it's critical problem for c/r -- if we meet a persistent tun device with a filter in mind, we will not be able to attach to it to dump its state (flags, owner, address, vnethdr size, etc.). The proposal is to allow to attach to tun device (with TUNSETIFF) w/o attaching the filter to the tun-file's socket. After this attach app may e.g clean the device by dropping the filter, it doesn't want to have one, or (in case of c/r) get information about the device with tun ioctls. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:32:21 +04:00
tuntap: attach queue 0 before registering netdevice We attach queue 0 after registering netdevice currently. This leads to call netif_set_real_num_{tx|rx}_queues() after registering the netdevice. Since we allow tun/tap has a maximum of 1024 queues, this may lead a huge number of uevents to be injected to userspace since we create 2048 kobjects and then remove 2046. Solve this problem by attaching queue 0 and set the real number of queues before registering netdevice. Reported-by: Jiri Slaby <jslaby@suse.cz> Tested-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-02 17:19:45 +00:00
tuntap: correctly handle error in tun_set_iff() Commit c8d68e6be1c3b242f1c598595830890b65cea64a (tuntap: multiqueue support) only call free_netdev() on error in tun_set_iff(). This causes several issues: - memory of tun security were leaked - use after free since the flow gc timer was not deleted and the tfile were not detached This patch solves the above issues. Reported-by: Wannes Rombouts <wannes.rombouts@epitech.eu> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-11 18:09:48 +08:00
tuntap: attach queue 0 before registering netdevice We attach queue 0 after registering netdevice currently. This leads to call netif_set_real_num_{tx|rx}_queues() after registering the netdevice. Since we allow tun/tap has a maximum of 1024 queues, this may lead a huge number of uevents to be injected to userspace since we create 2048 kobjects and then remove 2046. Solve this problem by attaching queue 0 and set the real number of queues before registering netdevice. Reported-by: Jiri Slaby <jslaby@suse.cz> Tested-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-02 17:19:45 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: correctly handle error in tun_set_iff() Commit c8d68e6be1c3b242f1c598595830890b65cea64a (tuntap: multiqueue support) only call free_netdev() on error in tun_set_iff(). This causes several issues: - memory of tun security were leaked - use after free since the flow gc timer was not deleted and the tfile were not detached This patch solves the above issues. Reported-by: Wannes Rombouts <wannes.rombouts@epitech.eu> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-11 18:09:48 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: fix carrier on/off status Commit c8d68e6be1c3b242f1c598595830890b65cea64a removed carrier off call from tun_detach since it's now called on queue disable and not only on tun close. This confuses userspace which used this flag to detect a free tun. To fix, put this back but under if (clean). Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28 00:38:02 +00:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: move internal flag defines out of uapi TUN_ flags are internal and never exposed to userspace. Any application using it is almost certainly buggy. Move them out to tun.c. Note: we remove these completely in follow-up patches, this code movement is split out for ease of review. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 14:44:40 +02:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: Persistent devices can get stuck in xoff state The scenario goes like this. App stops reading from tun/tap. TX queue gets full and driver does netif_stop_queue(). App closes fd and TX queue gets flushed as part of the cleanup. Next time the app opens tun/tap and starts reading from it but the xoff state is not cleared. We're stuck. Normally xoff state is cleared when netdev is brought up. But in the case of persistent devices this happens only during initial setup. The fix is trivial. If device is already up when an app opens it we clear xoff state and that gets things moving again. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-10 16:59:11 -07:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: Persistent devices can get stuck in xoff state The scenario goes like this. App stops reading from tun/tap. TX queue gets full and driver does netif_stop_queue(). App closes fd and TX queue gets flushed as part of the cleanup. Next time the app opens tun/tap and starts reading from it but the xoff state is not cleared. We're stuck. Normally xoff state is cleared when netdev is brought up. But in the case of persistent devices this happens only during initial setup. The fix is trivial. If device is already up when an app opens it we clear xoff state and that gets things moving again. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-10 16:59:11 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: correctly handle error in tun_set_iff() Commit c8d68e6be1c3b242f1c598595830890b65cea64a (tuntap: multiqueue support) only call free_netdev() on error in tun_set_iff(). This causes several issues: - memory of tun security were leaked - use after free since the flow gc timer was not deleted and the tfile were not detached This patch solves the above issues. Reported-by: Wannes Rombouts <wannes.rombouts@epitech.eu> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-11 18:09:48 +08:00
tun: handle register_netdevice() failures properly syzkaller reported a double free [1], caused by the fact that tun driver was not updated properly when priv_destructor was added. When/if register_netdevice() fails, priv_destructor() must have been called already. [1] BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023 CPU: 0 PID: 2919 Comm: syzkaller227220 Not tainted 4.13.0-rc4+ #23 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x7f/0x260 mm/kasan/report.c:252 kasan_report_double_free+0x55/0x80 mm/kasan/report.c:333 kasan_slab_free+0xa0/0xc0 mm/kasan/kasan.c:514 __cache_free mm/slab.c:3503 [inline] kfree+0xd3/0x260 mm/slab.c:3820 selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023 security_tun_dev_free_security+0x48/0x80 security/security.c:1512 tun_set_iff drivers/net/tun.c:1884 [inline] __tun_chr_ioctl+0x2ce6/0x3d50 drivers/net/tun.c:2064 tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x443ff9 RSP: 002b:00007ffc34271f68 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000443ff9 RDX: 0000000020533000 RSI: 00000000400454ca RDI: 0000000000000003 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401ce0 R13: 0000000000401d70 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 2919: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xaa/0xd0 mm/kasan/kasan.c:551 kmem_cache_alloc_trace+0x101/0x6f0 mm/slab.c:3627 kmalloc include/linux/slab.h:493 [inline] kzalloc include/linux/slab.h:666 [inline] selinux_tun_dev_alloc_security+0x49/0x170 security/selinux/hooks.c:5012 security_tun_dev_alloc_security+0x6d/0xa0 security/security.c:1506 tun_set_iff drivers/net/tun.c:1839 [inline] __tun_chr_ioctl+0x1730/0x3d50 drivers/net/tun.c:2064 tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 2919: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x6e/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kfree+0xd3/0x260 mm/slab.c:3820 selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023 security_tun_dev_free_security+0x48/0x80 security/security.c:1512 tun_free_netdev+0x13b/0x1b0 drivers/net/tun.c:1563 register_netdevice+0x8d0/0xee0 net/core/dev.c:7605 tun_set_iff drivers/net/tun.c:1859 [inline] __tun_chr_ioctl+0x1caf/0x3d50 drivers/net/tun.c:2064 tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe The buggy address belongs to the object at ffff8801d2843b40 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 0 bytes inside of 32-byte region [ffff8801d2843b40, ffff8801d2843b60) The buggy address belongs to the page: page:ffffea000660cea8 count:1 mapcount:0 mapping:ffff8801d2843000 index:0xffff8801d2843fc1 flags: 0x200000000000100(slab) raw: 0200000000000100 ffff8801d2843000 ffff8801d2843fc1 000000010000003f raw: ffffea0006626a40 ffffea00066141a0 ffff8801dbc00100 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801d2843a00: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc ffff8801d2843a80: 00 00 00 fc fc fc fc fc fb fb fb fb fc fc fc fc >ffff8801d2843b00: 00 00 00 00 fc fc fc fc fb fb fb fb fc fc fc fc ^ ffff8801d2843b80: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc ffff8801d2843c00: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc ================================================================== Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 13:39:56 -07:00
tuntap: correctly handle error in tun_set_iff() Commit c8d68e6be1c3b242f1c598595830890b65cea64a (tuntap: multiqueue support) only call free_netdev() on error in tun_set_iff(). This causes several issues: - memory of tun security were leaked - use after free since the flow gc timer was not deleted and the tfile were not detached This patch solves the above issues. Reported-by: Wannes Rombouts <wannes.rombouts@epitech.eu> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-11 18:09:48 +08:00
tun: use per cpu variables for stats accounting Currently the tun device accounting uses dev->stats without applying any kind of protection, regardless that accounting happens in preemptible process context. This patch move the tun stats to a per cpu data structure, and protect the updates with u64_stats_update_begin()/u64_stats_update_end() or this_cpu_inc according to the stat type. The per cpu stats are aggregated by the newly added ndo_get_stats64 ops. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 10:52:20 +02:00
tuntap: correctly handle error in tun_set_iff() Commit c8d68e6be1c3b242f1c598595830890b65cea64a (tuntap: multiqueue support) only call free_netdev() on error in tun_set_iff(). This causes several issues: - memory of tun security were leaked - use after free since the flow gc timer was not deleted and the tfile were not detached This patch solves the above issues. Reported-by: Wannes Rombouts <wannes.rombouts@epitech.eu> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-11 18:09:48 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: change tun_get_iff() prototype. This patch changes tun_get_iff() prototype to return void as it never fails. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-23 03:58:10 +00:00
tun: Extend RTNL lock coverage over whole ioctl As it is, parts of the ioctl runs under the RTNL and parts of it do not. The unlocked section is still protected by the BKL, but there can be subtle races. For example, Eric Biederman and Paul Moore observed that if two threads tried to create two tun devices on the same file descriptor, then unexpected results may occur. As there isn't anything in the ioctl that is expected to sleep indefinitely, we can prevent this from occurring by extending the RTNL lock coverage. This also allows to get rid of the BKL. Finally, I changed tun_get_iff to take a tun device in order to avoid calling tun_put which would dead-lock as it also tries to take the RTNL lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-06 14:22:44 +00:00
tun: TUNGETIFF interface to query name and flags Add a TUNGETIFF interface so that userspace can query a tun/tap descriptor for its name and flags. This is needed because it is common for one app to create a tap interface, exec another app and pass it the file descriptor for the interface. Without TUNGETIFF the spawned app has no way of detecting wheter the interface has e.g. IFF_VNET_HDR set. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:09:56 -07:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
tun: TUNGETIFF interface to query name and flags Add a TUNGETIFF interface so that userspace can query a tun/tap descriptor for its name and flags. This is needed because it is common for one app to create a tap interface, exec another app and pass it the file descriptor for the interface. Without TUNGETIFF the spawned app has no way of detecting wheter the interface has e.g. IFF_VNET_HDR set. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:09:56 -07:00
tun: add tun_flags, owner, group attributes in sysfs This patch adds three attribute files in /sys/class/net/$dev/ for tun devices; allowing userspace to obtain the information which TUNGETIFF offers, and more, but without having to attach to the device in question (which may not be possible if it's in use). It also fixes a bug which has been present in the TUNGETIFF ioctl since its inception, where it would never set IFF_TUN or IFF_TAP according to the device type. (Look carefully at the code which I remove from tun_get_iff() and how the new tun_flags() helper is subtly different). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-09 22:54:21 -07:00
tun: TUNGETIFF interface to query name and flags Add a TUNGETIFF interface so that userspace can query a tun/tap descriptor for its name and flags. This is needed because it is common for one app to create a tap interface, exec another app and pass it the file descriptor for the interface. Without TUNGETIFF the spawned app has no way of detecting wheter the interface has e.g. IFF_VNET_HDR set. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:09:56 -07:00
tun: TUNSETFEATURES to set gso features. ethtool is useful for setting (some) device fields, but it's root-only. Finer feature control is available through a tun-specific ioctl. (Includes Mark McLoughlin <markmc@redhat.com>'s fix to hold rtnl sem). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:46:16 -07:00
net: tun: convert to hw_features This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 06:13:10 +00:00
tun: TUNSETFEATURES to set gso features. ethtool is useful for setting (some) device fields, but it's root-only. Finer feature control is available through a tun-specific ioctl. (Includes Mark McLoughlin <markmc@redhat.com>'s fix to hold rtnl sem). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:46:16 -07:00
net: introduce and use netdev_features_t for device features sets v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-15 15:29:55 +00:00
tun: TUNSETFEATURES to set gso features. ethtool is useful for setting (some) device fields, but it's root-only. Finer feature control is available through a tun-specific ioctl. (Includes Mark McLoughlin <markmc@redhat.com>'s fix to hold rtnl sem). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:46:16 -07:00
net: tun: convert to hw_features This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 06:13:10 +00:00
tun: TUNSETFEATURES to set gso features. ethtool is useful for setting (some) device fields, but it's root-only. Finer feature control is available through a tun-specific ioctl. (Includes Mark McLoughlin <markmc@redhat.com>'s fix to hold rtnl sem). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:46:16 -07:00
net: accept UFO datagrams from tuntap and packet [ Upstream commit 0c19f846d582af919db66a5914a0189f9f92c936 ] Tuntap and similar devices can inject GSO packets. Accept type VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively. Processes are expected to use feature negotiation such as TUNSETOFFLOAD to detect supported offload types and refrain from injecting other packets. This process breaks down with live migration: guest kernels do not renegotiate flags, so destination hosts need to expose all features that the source host does. Partially revert the UFO removal from 182e0b6b5846~1..d9d30adf5677. This patch introduces nearly(*) no new code to simplify verification. It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP insertion and software UFO segmentation. It does not reinstate protocol stack support, hardware offload (NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception of VIRTIO_NET_HDR_GSO_UDP packets in tuntap. To support SKB_GSO_UDP reappearing in the stack, also reinstate logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD by squashing in commit 939912216fa8 ("net: skb_needs_check() removes CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee643f1 ("net: avoid skb_warn_bad_offload false positives on UFO"). (*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id, ipv6_proxy_select_ident is changed to return a __be32 and this is assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted at the end of the enum to minimize code churn. Tested Booted a v4.13 guest kernel with QEMU. On a host kernel before this patch `ethtool -k eth0` shows UFO disabled. After the patch, it is enabled, same as on a v4.13 host kernel. A UFO packet sent from the guest appears on the tap device: host: nc -l -p -u 8000 & tcpdump -n -i tap0 guest: dd if=/dev/zero of=payload.txt bs=1 count=2000 nc -u 192.16.1.1 8000 < payload.txt Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds, packets arriving fragmented: ./with_tap_pair.sh ./tap_send_ufo tap0 tap1 (from https://github.com/wdebruij/kerneltools/tree/master/tests) Changes v1 -> v2 - simplified set_offload change (review comment) - documented test procedure Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com> Fixes: fb652fdfe837 ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.") Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21 10:22:25 -05:00
tun: TUNSETFEATURES to set gso features. ethtool is useful for setting (some) device fields, but it's root-only. Finer feature control is available through a tun-specific ioctl. (Includes Mark McLoughlin <markmc@redhat.com>'s fix to hold rtnl sem). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:46:16 -07:00
net: tun: convert to hw_features This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 06:13:10 +00:00
tun: fix inability to set offloads after disabling them via ethtool Added missing logic in tun driver, which prevents apps to set offloads using tun ioctl, if offloads were previously disabled via ethtool Signed-off-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16 22:44:10 +03:00
net: tun: convert to hw_features This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 06:13:10 +00:00
tun: TUNSETFEATURES to set gso features. ethtool is useful for setting (some) device fields, but it's root-only. Finer feature control is available through a tun-specific ioctl. (Includes Mark McLoughlin <markmc@redhat.com>'s fix to hold rtnl sem). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:46:16 -07:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: switch to use rtnl_dereference() Switch to use rtnl_dereference() instead of the open code, suggested by Eric. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:32 +00:00
tun: use socket locks for sk_{attach,detatch}_filter This reverts commit 5a5abb1fa3b05dd ("tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter") and replaces it to use lock_sock around sk_{attach,detach}_filter. The checks inside filter.c are updated with lockdep_sock_is_held to check for proper socket locks. It keeps the code cleaner by ensuring that only one lock governs the socket filter instead of two independent locks. Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05 17:10:16 +02:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: switch to use rtnl_dereference() Switch to use rtnl_dereference() instead of the open code, suggested by Eric. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:32 +00:00
tun: use socket locks for sk_{attach,detatch}_filter This reverts commit 5a5abb1fa3b05dd ("tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter") and replaces it to use lock_sock around sk_{attach,detach}_filter. The checks inside filter.c are updated with lockdep_sock_is_held to check for proper socket locks. It keeps the code cleaner by ensuring that only one lock governs the socket filter instead of two independent locks. Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05 17:10:16 +02:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: switch to use rtnl_dereference() Switch to use rtnl_dereference() instead of the open code, suggested by Eric. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:32 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tuntap: add ioctl to attach or detach a file form tuntap device Sometimes usespace may need to active/deactive a queue, this could be done by detaching and attaching a file from tuntap device. This patch introduces a new ioctls - TUNSETQUEUE which could be used to do this. Flag IFF_ATTACH_QUEUE were introduced to do attaching while IFF_DETACH_QUEUE were introduced to do the detaching. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:01 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tun: fix LSM/SELinux labeling of tun/tap devices This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@parisplace.org> Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14 07:12:19 +00:00
tuntap: add ioctl to attach or detach a file form tuntap device Sometimes usespace may need to active/deactive a queue, this could be done by detaching and attaching a file from tuntap device. This patch introduces a new ioctls - TUNSETQUEUE which could be used to do this. Flag IFF_ATTACH_QUEUE were introduced to do attaching while IFF_DETACH_QUEUE were introduced to do the detaching. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:01 +00:00
tun: fix LSM/SELinux labeling of tun/tap devices This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@parisplace.org> Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14 07:12:19 +00:00
tun: Allow to skip filter on attach There's a small problem with sk-filters on tun devices. Consider an application doing this sequence of steps: fd = open("/dev/net/tun"); ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" }); ioctl(fd, TUNATTACHFILTER, &my_filter); ioctl(fd, TUNSETPERSIST, 1); close(fd); At that point the tun0 will remain in the system and will keep in mind that there should be a socket filter at address '&my_filter'. If after that we do fd = open("/dev/net/tun"); ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" }); we most likely receive the -EFAULT error, since tun_attach() would try to connect the filter back. But (!) if we provide a filter at address &my_filter, then tun0 will be created and the "new" filter would be attached, but application may not know about that. This may create certain problems to anyone using tun-s, but it's critical problem for c/r -- if we meet a persistent tun device with a filter in mind, we will not be able to attach to it to dump its state (flags, owner, address, vnethdr size, etc.). The proposal is to allow to attach to tun device (with TUNSETIFF) w/o attaching the filter to the tun-file's socket. After this attach app may e.g clean the device by dropping the filter, it doesn't want to have one, or (in case of c/r) get information about the device with tun ioctls. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:32:21 +04:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tuntap: switch to use rtnl_dereference() Switch to use rtnl_dereference() instead of the open code, suggested by Eric. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:32 +00:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tuntap: add ioctl to attach or detach a file form tuntap device Sometimes usespace may need to active/deactive a queue, this could be done by detaching and attaching a file from tuntap device. This patch introduces a new ioctls - TUNSETQUEUE which could be used to do this. Flag IFF_ATTACH_QUEUE were introduced to do attaching while IFF_DETACH_QUEUE were introduced to do the detaching. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:01 +00:00
tun: fix LSM/SELinux labeling of tun/tap devices This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@parisplace.org> Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14 07:12:19 +00:00
tuntap: add ioctl to attach or detach a file form tuntap device Sometimes usespace may need to active/deactive a queue, this could be done by detaching and attaching a file from tuntap device. This patch introduces a new ioctls - TUNSETQUEUE which could be used to do this. Flag IFF_ATTACH_QUEUE were introduced to do attaching while IFF_DETACH_QUEUE were introduced to do the detaching. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:01 +00:00
net/tun: handle compat_ioctl directly The tun driver is the only code in the kernel that operates on a character device with struct ifreq. Change the driver to handle the conversion itself so we can contain the remaining ifreq handling in the socket layer. This also fixes a bug in the handling of invalid ioctl numbers on an unbound tun device. The driver treats this as a TUNSETIFF in native mode, but there is no way for the generic compat_ioctl() function to emulate this behaviour. Possibly the driver was only doing this accidentally anyway, but if any code relies on this misfeature, it now also works in compat mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06 22:52:32 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Grab the netns in open. Grabbing namespaces in open, and putting them in close always seems to be the cleanest approach with the fewest surprises. So now that we have tun_file so we have somepleace to put the network namespace, let's grab the network namespace on file open and put on file close. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:01:48 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
userns: Convert tun/tap to use kuid and kgid where appropriate Cc: Maxim Krasnyansky <maxk@qualcomm.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-02-07 16:48:55 -08:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tun: add ioctl to modify vnet header size virtio added mergeable buffers mode where 2 bytes of extra info is put after vnet header but before actual data (tun does not need this data). In hindsight, it would have been better to add the new info *before* the packet: as it is, users need a lot of tricky code to skip the extra 2 bytes in the middle of the iovec, and in fact applications seem to get it wrong, and only work with specific iovec layout. The fact we might need to split iovec also means we might in theory overflow iovec max size. This patch adds a simpler way for applications to handle this, and future proofs the interface against further extensions, by making the size of the virtio net header configurable from userspace. As a result, tun driver will simply skip the extra 2 bytes on both input and output. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David S. Miller <davem@davemloft.net>
2010-03-17 17:45:01 +02:00
tun: Add ability to create tun device with given index Tun devices cannot be created with ifidex user wants, but it's required by checkpoint-restore project. Long time ago such ability was implemented for rtnl_ops-based interface for creating links (9c7dafbf net: Allow to create links with given ifindex), but the only API for creating and managing tuntap devices is ioctl-based and is evolving with adding new ones (cde8b15f tuntap: add ioctl to attach or detach a file form tuntap device). Following that trend, here's how a new ioctl that sets the ifindex for device, that _will_ be created by TUNSETIFF ioctl looks like. So those who want a tuntap device with the ifindex N, should open the tun device, call ioctl(fd, TUNSETIFINDEX, &N), then call TUNSETIFF. If the index N is busy, then the register_netdev will find this out and the ioctl would be failed with -EBUSY. If setifindex is not called, then it will be generated as before. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:31:38 +04:00
tun: drop broken IFF_VNET_LE Use TUNSETVNETLE/TUNGETVNETLE instead. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-16 15:05:06 +02:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
driver: tun: Use new macro SOCK_IOC_TYPE instead of literal number 0x89 The current codes use _IOC_TYPE(cmd) == 0x89 to check if the cmd is one socket ioctl command like SIOCGIFHWADDR. But the literal number 0x89 may confuse readers. So create one macro SOCK_IOC_TYPE to enhance the readability. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27 09:05:22 +08:00
net/tun: handle compat_ioctl directly The tun driver is the only code in the kernel that operates on a character device with struct ifreq. Change the driver to handle the conversion itself so we can contain the remaining ifreq handling in the socket layer. This also fixes a bug in the handling of invalid ioctl numbers on an unbound tun device. The driver treats this as a TUNSETIFF in native mode, but there is no way for the generic compat_ioctl() function to emulate this behaviour. Possibly the driver was only doing this accidentally anyway, but if any code relies on this misfeature, it now also works in compat mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06 22:52:32 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Fix formatting. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-30 14:52:48 -07:00
net/tun: fix ioctl() based info leaks The tun module leaks up to 36 bytes of memory by not fully initializing a structure located on the stack that gets copied to user memory by the TUNGETIFF and SIOCGIFHWADDR ioctl()s. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-29 19:45:14 +00:00
tun: Fix formatting. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-30 14:52:48 -07:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tun: move internal flag defines out of uapi TUN_ flags are internal and never exposed to userspace. Any application using it is almost certainly buggy. Move them out to tun.c. Note: we remove these completely in follow-up patches, this code movement is split out for ease of review. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 14:44:40 +02:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tuntap: add ioctl to attach or detach a file form tuntap device Sometimes usespace may need to active/deactive a queue, this could be done by detaching and attaching a file from tuntap device. This patch introduces a new ioctls - TUNSETQUEUE which could be used to do this. Flag IFF_ATTACH_QUEUE were introduced to do attaching while IFF_DETACH_QUEUE were introduced to do the detaching. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:01 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: Extend RTNL lock coverage over whole ioctl As it is, parts of the ioctl runs under the RTNL and parts of it do not. The unlocked section is still protected by the BKL, but there can be subtle races. For example, Eric Biederman and Paul Moore observed that if two threads tried to create two tun devices on the same file descriptor, then unexpected results may occur. As there isn't anything in the ioctl that is expected to sleep indefinitely, we can prevent this from occurring by extending the RTNL lock coverage. This also allows to get rid of the BKL. Finally, I changed tun_get_iff to take a tun device in order to avoid calling tun_put which would dead-lock as it also tries to take the RTNL lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-06 14:22:44 +00:00
tun: Grab the netns in open. Grabbing namespaces in open, and putting them in close always seems to be the cleanest approach with the fewest surprises. So now that we have tun_file so we have somepleace to put the network namespace, let's grab the network namespace on file open and put on file close. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:01:48 +00:00
driver: tun: Move tun check into the block of TUNSETIFF condition check When cmd is TUNSETIFF and tun is not null, the original codes go ahead, then reach the default case of switch(cmd) and set the ret is -EINVAL. It is not clear for readers. Now move the tun check into the block of TUNSETIFF condition check, and return -EEXIST instead of -EINVAL when the tfile already owns one tun. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-25 22:26:09 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Utilize the normal socket network namespace refcounting. There is no need for tun to do the weird network namespace refcounting. The existing network namespace refcounting in tfile has almost exactly the same lifetime. So rewrite the code to use the struct sock network namespace refcounting and remove the unnecessary hand rolled network namespace refcounting and the unncesary tfile->net. This change allows the tun code to directly call sock_put bypassing sock_release and making SOCK_EXTERNALLY_ALLOCATED unnecessary. Remove the now unncessary tun_release so that if anything tries to use the sock_release code path the kernel will oops, and let us know about the bug. The macvtap code already uses it's internal socket this way. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-08 21:07:08 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Extend RTNL lock coverage over whole ioctl As it is, parts of the ioctl runs under the RTNL and parts of it do not. The unlocked section is still protected by the BKL, but there can be subtle races. For example, Eric Biederman and Paul Moore observed that if two threads tried to create two tun devices on the same file descriptor, then unexpected results may occur. As there isn't anything in the ioctl that is expected to sleep indefinitely, we can prevent this from occurring by extending the RTNL lock coverage. This also allows to get rid of the BKL. Finally, I changed tun_get_iff to take a tun device in order to avoid calling tun_put which would dead-lock as it also tries to take the RTNL lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-06 14:22:44 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net/tun: handle compat_ioctl directly The tun driver is the only code in the kernel that operates on a character device with struct ifreq. Change the driver to handle the conversion itself so we can contain the remaining ifreq handling in the socket layer. This also fixes a bug in the handling of invalid ioctl numbers on an unbound tun device. The driver treats this as a TUNSETIFF in native mode, but there is no way for the generic compat_ioctl() function to emulate this behaviour. Possibly the driver was only doing this accidentally anyway, but if any code relies on this misfeature, it now also works in compat mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06 22:52:32 -08:00
tun: Extend RTNL lock coverage over whole ioctl As it is, parts of the ioctl runs under the RTNL and parts of it do not. The unlocked section is still protected by the BKL, but there can be subtle races. For example, Eric Biederman and Paul Moore observed that if two threads tried to create two tun devices on the same file descriptor, then unexpected results may occur. As there isn't anything in the ioctl that is expected to sleep indefinitely, we can prevent this from occurring by extending the RTNL lock coverage. This also allows to get rid of the BKL. Finally, I changed tun_get_iff to take a tun device in order to avoid calling tun_put which would dead-lock as it also tries to take the RTNL lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-06 14:22:44 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Add ability to create tun device with given index Tun devices cannot be created with ifidex user wants, but it's required by checkpoint-restore project. Long time ago such ability was implemented for rtnl_ops-based interface for creating links (9c7dafbf net: Allow to create links with given ifindex), but the only API for creating and managing tuntap devices is ioctl-based and is evolving with adding new ones (cde8b15f tuntap: add ioctl to attach or detach a file form tuntap device). Following that trend, here's how a new ioctl that sets the ifindex for device, that _will_ be created by TUNSETIFF ioctl looks like. So those who want a tuntap device with the ifindex N, should open the tun device, call ioctl(fd, TUNSETIFINDEX, &N), then call TUNSETIFF. If the index N is busy, then the register_netdev will find this out and the ioctl would be failed with -EBUSY. If setifindex is not called, then it will be generated as before. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:31:38 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Extend RTNL lock coverage over whole ioctl As it is, parts of the ioctl runs under the RTNL and parts of it do not. The unlocked section is still protected by the BKL, but there can be subtle races. For example, Eric Biederman and Paul Moore observed that if two threads tried to create two tun devices on the same file descriptor, then unexpected results may occur. As there isn't anything in the ioctl that is expected to sleep indefinitely, we can prevent this from occurring by extending the RTNL lock coverage. This also allows to get rid of the BKL. Finally, I changed tun_get_iff to take a tun device in order to avoid calling tun_put which would dead-lock as it also tries to take the RTNL lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-06 14:22:44 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Extend RTNL lock coverage over whole ioctl As it is, parts of the ioctl runs under the RTNL and parts of it do not. The unlocked section is still protected by the BKL, but there can be subtle races. For example, Eric Biederman and Paul Moore observed that if two threads tried to create two tun devices on the same file descriptor, then unexpected results may occur. As there isn't anything in the ioctl that is expected to sleep indefinitely, we can prevent this from occurring by extending the RTNL lock coverage. This also allows to get rid of the BKL. Finally, I changed tun_get_iff to take a tun device in order to avoid calling tun_put which would dead-lock as it also tries to take the RTNL lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-06 14:22:44 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: log the unsigned informaiton with %u Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:56 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: TUNGETIFF interface to query name and flags Add a TUNGETIFF interface so that userspace can query a tun/tap descriptor for its name and flags. This is needed because it is common for one app to create a tap interface, exec another app and pass it the file descriptor for the interface. Without TUNGETIFF the spawned app has no way of detecting wheter the interface has e.g. IFF_VNET_HDR set. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:09:56 -07:00
tun: change tun_get_iff() prototype. This patch changes tun_get_iff() prototype to return void as it never fails. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-23 03:58:10 +00:00
tun: TUNGETIFF interface to query name and flags Add a TUNGETIFF interface so that userspace can query a tun/tap descriptor for its name and flags. This is needed because it is common for one app to create a tap interface, exec another app and pass it the file descriptor for the interface. Without TUNGETIFF the spawned app has no way of detecting wheter the interface has e.g. IFF_VNET_HDR set. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:09:56 -07:00
tun: Report whether the queue is attached or not Multiqueue tun devices allow to attach and detach from its queues while keeping the interface itself set on file. Knowing this is critical for the checkpoint part of criu project. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:32:00 +04:00
tun: Allow to skip filter on attach There's a small problem with sk-filters on tun devices. Consider an application doing this sequence of steps: fd = open("/dev/net/tun"); ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" }); ioctl(fd, TUNATTACHFILTER, &my_filter); ioctl(fd, TUNSETPERSIST, 1); close(fd); At that point the tun0 will remain in the system and will keep in mind that there should be a socket filter at address '&my_filter'. If after that we do fd = open("/dev/net/tun"); ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" }); we most likely receive the -EFAULT error, since tun_attach() would try to connect the filter back. But (!) if we provide a filter at address &my_filter, then tun0 will be created and the "new" filter would be attached, but application may not know about that. This may create certain problems to anyone using tun-s, but it's critical problem for c/r -- if we meet a persistent tun device with a filter in mind, we will not be able to attach to it to dump its state (flags, owner, address, vnethdr size, etc.). The proposal is to allow to attach to tun device (with TUNSETIFF) w/o attaching the filter to the tun-file's socket. After this attach app may e.g clean the device by dropping the filter, it doesn't want to have one, or (in case of c/r) get information about the device with tun ioctls. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:32:21 +04:00
tun: Report whether the queue is attached or not Multiqueue tun devices allow to attach and detach from its queues while keeping the interface itself set on file. Knowing this is critical for the checkpoint part of criu project. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:32:00 +04:00
net/tun: handle compat_ioctl directly The tun driver is the only code in the kernel that operates on a character device with struct ifreq. Change the driver to handle the conversion itself so we can contain the remaining ifreq handling in the socket layer. This also fixes a bug in the handling of invalid ioctl numbers on an unbound tun device. The driver treats this as a TUNSETIFF in native mode, but there is no way for the generic compat_ioctl() function to emulate this behaviour. Possibly the driver was only doing this accidentally anyway, but if any code relies on this misfeature, it now also works in compat mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06 22:52:32 -08:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tun: TUNGETIFF interface to query name and flags Add a TUNGETIFF interface so that userspace can query a tun/tap descriptor for its name and flags. This is needed because it is common for one app to create a tap interface, exec another app and pass it the file descriptor for the interface. Without TUNGETIFF the spawned app has no way of detecting wheter the interface has e.g. IFF_VNET_HDR set. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 15:09:56 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: tun: convert to hw_features This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 06:13:10 +00:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tuntap: fix leaking reference count Reference count leaking of both module and sock were found: - When a detached file were closed, its sock refcnt from device were not released, solving this by add the sock_put(). - The module were hold or drop unconditionally in TUNSETPERSIST, which means we if we set the persist flag for N times, we need unset it for another N times. Solving this by only hold or drop an reference when there's a flag change and also drop the reference count when the persist device is deleted. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 16:59:34 +00:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
userns: Convert tun/tap to use kuid and kgid where appropriate Cc: Maxim Krasnyansky <maxk@qualcomm.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-02-07 16:48:55 -08:00
tuntap: log the unsigned informaiton with %u Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:56 +00:00
userns: Convert tun/tap to use kuid and kgid where appropriate Cc: Maxim Krasnyansky <maxk@qualcomm.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-02-07 16:48:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[NET]: Allow group ownership of TUN/TAP devices. Introduce a new syscall TUNSETGROUP for group ownership setting of tap devices. The user now is allowed to send packages if either his euid or his egid matches the one specified via tunctl (via -u or -g respecitvely). If both, gid and uid, are set via tunctl, both have to match. Signed-off-by: Guido Guenther <agx@sigxcpu.org> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-02 22:50:25 -07:00
userns: Convert tun/tap to use kuid and kgid where appropriate Cc: Maxim Krasnyansky <maxk@qualcomm.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-02-07 16:48:55 -08:00
tuntap: log the unsigned informaiton with %u Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:56 +00:00
userns: Convert tun/tap to use kuid and kgid where appropriate Cc: Maxim Krasnyansky <maxk@qualcomm.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-02-07 16:48:55 -08:00
[NET]: Allow group ownership of TUN/TAP devices. Introduce a new syscall TUNSETGROUP for group ownership setting of tap devices. The user now is allowed to send packages if either his euid or his egid matches the one specified via tunctl (via -u or -g respecitvely). If both, gid and uid, are set via tunctl, both have to match. Signed-off-by: Guido Guenther <agx@sigxcpu.org> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-02 22:50:25 -07:00
[TUNTAP]: Allow setting the linktype of the tap device from userspace Currently tun/tap only supports the EN10MB ARP type. For use with wireless and other networking types it should be possible to set the ARP type via an ioctl. Patch v2: Included check that the tap interface is down before changing the link type out from underneath it Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-01 17:40:05 -07:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
tun: Fix minor race in TUNSETLINK ioctl handling. Noticed by Alan Cox. The IFF_UP test is a bit racey, because other entities outside of this driver's ioctl handler can modify that state, even though this ioctl handler runs under lock_kernel(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-23 19:37:58 -07:00
[TUNTAP]: Allow setting the linktype of the tap device from userspace Currently tun/tap only supports the EN10MB ARP type. For use with wireless and other networking types it should be possible to set the ARP type via an ioctl. Patch v2: Included check that the tap interface is down before changing the link type out from underneath it Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-01 17:40:05 -07:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
tun: Fix minor race in TUNSETLINK ioctl handling. Noticed by Alan Cox. The IFF_UP test is a bit racey, because other entities outside of this driver's ioctl handler can modify that state, even though this ioctl handler runs under lock_kernel(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-23 19:37:58 -07:00
[TUNTAP]: Allow setting the linktype of the tap device from userspace Currently tun/tap only supports the EN10MB ARP type. For use with wireless and other networking types it should be possible to set the ARP type via an ioctl. Patch v2: Included check that the tap interface is down before changing the link type out from underneath it Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-01 17:40:05 -07:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
[TUNTAP]: Allow setting the linktype of the tap device from userspace Currently tun/tap only supports the EN10MB ARP type. For use with wireless and other networking types it should be possible to set the ARP type via an ioctl. Patch v2: Included check that the tap interface is down before changing the link type out from underneath it Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-01 17:40:05 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: TUNSETFEATURES to set gso features. ethtool is useful for setting (some) device fields, but it's root-only. Finer feature control is available through a tun-specific ioctl. (Includes Mark McLoughlin <markmc@redhat.com>'s fix to hold rtnl sem). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:46:16 -07:00
net: tun: convert to hw_features This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c27684ab925adde7d8acc34c78c6e50df8: tun: Allow GSO using virtio_net_hdr Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 06:13:10 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tun: TUNSETFEATURES to set gso features. ethtool is useful for setting (some) device fields, but it's root-only. Finer feature control is available through a tun-specific ioctl. (Includes Mark McLoughlin <markmc@redhat.com>'s fix to hold rtnl sem). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 03:46:16 -07:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
net: tun.c fix cast Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-16 12:45:34 -07:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tree-wide: fix comment/printk typos "gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
net/tun: handle compat_ioctl directly The tun driver is the only code in the kernel that operates on a character device with struct ifreq. Change the driver to handle the conversion itself so we can contain the remaining ifreq handling in the socket layer. This also fixes a bug in the handling of invalid ioctl numbers on an unbound tun device. The driver treats this as a TUNSETIFF in native mode, but there is no way for the generic compat_ioctl() function to emulate this behaviour. Possibly the driver was only doing this accidentally anyway, but if any code relies on this misfeature, it now also works in compat mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06 22:52:32 -08:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:18:19 -07:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
[TUN]: Fix RTNL-locking in tun/tap driver Current tun/tap driver sets also net device's hw address when asked to change character device's hw address. This is a good idea, but it misses RTLN-locking, resulting following error message in 2.6.25-rc3's inetdev_event() function: RTNL: assertion failed at net/ipv4/devinet.c (1050) Attached patch fixes this problem. Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29 12:26:21 -08:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tun/tap: sanitize TUNSETSNDBUF input Syzkaller found several variants of the lockup below by setting negative values with the TUNSETSNDBUF ioctl. This patch adds a sanity check to both the tun and tap versions of this ioctl. watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [repro:2389] Modules linked in: irq event stamp: 329692056 hardirqs last enabled at (329692055): [<ffffffff824b8381>] _raw_spin_unlock_irqrestore+0x31/0x75 hardirqs last disabled at (329692056): [<ffffffff824b9e58>] apic_timer_interrupt+0x98/0xb0 softirqs last enabled at (35659740): [<ffffffff824bc958>] __do_softirq+0x328/0x48c softirqs last disabled at (35659731): [<ffffffff811c796c>] irq_exit+0xbc/0xd0 CPU: 0 PID: 2389 Comm: repro Not tainted 4.14.0-rc7 #23 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880009452140 task.stack: ffff880006a20000 RIP: 0010:_raw_spin_lock_irqsave+0x11/0x80 RSP: 0018:ffff880006a27c50 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff10 RAX: ffff880009ac68d0 RBX: ffff880006a27ce0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff880006a27ce0 RDI: ffff880009ac6900 RBP: ffff880006a27c60 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 000000000063ff00 R12: ffff880009ac6900 R13: ffff880006a27cf8 R14: 0000000000000001 R15: ffff880006a27cf8 FS: 00007f4be4838700(0000) GS:ffff88000cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020101000 CR3: 0000000009616000 CR4: 00000000000006f0 Call Trace: prepare_to_wait+0x26/0xc0 sock_alloc_send_pskb+0x14e/0x270 ? remove_wait_queue+0x60/0x60 tun_get_user+0x2cc/0x19d0 ? __tun_get+0x60/0x1b0 tun_chr_write_iter+0x57/0x86 __vfs_write+0x156/0x1e0 vfs_write+0xf7/0x230 SyS_write+0x57/0xd0 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f4be4356df9 RSP: 002b:00007ffc18101c08 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4be4356df9 RDX: 0000000000000046 RSI: 0000000020101000 RDI: 0000000000000005 RBP: 00007ffc18101c40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000293 R12: 0000559c75f64780 R13: 00007ffc18101d30 R14: 0000000000000000 R15: 0000000000000000 Fixes: 33dccbb050bb ("tun: Limit amount of queued packets per device") Fixes: 20d29d7a916a ("net: macvtap driver") Signed-off-by: Craig Gallek <kraig@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-30 18:50:11 -04:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: Limit amount of queued packets per device Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05 21:25:32 -08:00
tun: add ioctl to modify vnet header size virtio added mergeable buffers mode where 2 bytes of extra info is put after vnet header but before actual data (tun does not need this data). In hindsight, it would have been better to add the new info *before* the packet: as it is, users need a lot of tricky code to skip the extra 2 bytes in the middle of the iovec, and in fact applications seem to get it wrong, and only work with specific iovec layout. The fact we might need to split iovec also means we might in theory overflow iovec max size. This patch adds a simpler way for applications to handle this, and future proofs the interface against further extensions, by making the size of the virtio net header configurable from userspace. As a result, tun driver will simply skip the extra 2 bytes on both input and output. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David S. Miller <davem@davemloft.net>
2010-03-17 17:45:01 +02:00
tun: drop broken IFF_VNET_LE Use TUNSETVNETLE/TUNGETVNETLE instead. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-16 15:05:06 +02:00
macvtap/tun: cross-endian support for little-endian hosts The VNET_LE flag was introduced to fix accesses to virtio 1.0 headers that are always little-endian. It can also be used to handle the special case of a legacy little-endian device implemented by a big-endian host. Let's add a flag and ioctls for big-endian devices as well. If both flags are set, little-endian wins. Since this is isn't a common usecase, the feature is controlled by a kernel config option (not set by default). Both macvtap and tun are covered by this patch since they share the same API with userland. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2015-04-24 14:50:36 +02:00
tun: socket filter support This patch adds Linux Socket Filter support to tun driver. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14 01:01:10 +00:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: socket filter support This patch adds Linux Socket Filter support to tun driver. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14 01:01:10 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: socket filter support This patch adds Linux Socket Filter support to tun driver. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14 01:01:10 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: socket filter support This patch adds Linux Socket Filter support to tun driver. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14 01:01:10 +00:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: socket filter support This patch adds Linux Socket Filter support to tun driver. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14 01:01:10 +00:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
tun: socket filter support This patch adds Linux Socket Filter support to tun driver. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14 01:01:10 +00:00
tun: Get skfilter layout The only thing we may have from tun device is the fprog, whic contains the number of filter elements and a pointer to (user-space) memory where the elements are. The program itself may not be available if the device is persistent and detached. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:32:39 +04:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
tun: Get skfilter layout The only thing we may have from tun device is the fprog, whic contains the number of filter elements and a pointer to (user-space) memory where the elements are. The program itself may not be available if the device is persistent and detached. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:32:39 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
drivers/net: remove useless semicolons switch and while statements don't need semicolons at end of statement [ Fixup minor conflicts with recent wimax merge... -DaveM ] Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17 22:47:34 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Extend RTNL lock coverage over whole ioctl As it is, parts of the ioctl runs under the RTNL and parts of it do not. The unlocked section is still protected by the BKL, but there can be subtle races. For example, Eric Biederman and Paul Moore observed that if two threads tried to create two tun devices on the same file descriptor, then unexpected results may occur. As there isn't anything in the ioctl that is expected to sleep indefinitely, we can prevent this from occurring by extending the RTNL lock coverage. This also allows to get rid of the BKL. Finally, I changed tun_get_iff to take a tun device in order to avoid calling tun_put which would dead-lock as it also tries to take the RTNL lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-06 14:22:44 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net/tun: handle compat_ioctl directly The tun driver is the only code in the kernel that operates on a character device with struct ifreq. Change the driver to handle the conversion itself so we can contain the remaining ifreq handling in the socket layer. This also fixes a bug in the handling of invalid ioctl numbers on an unbound tun device. The driver treats this as a TUNSETIFF in native mode, but there is no way for the generic compat_ioctl() function to emulate this behaviour. Possibly the driver was only doing this accidentally anyway, but if any code relies on this misfeature, it now also works in compat mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06 22:52:32 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: fasync BKL pushdown Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2008-06-19 15:50:37 -06:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
security: make security_file_set_fowner, f_setown and __f_setown void return security_file_set_fowner always returns 0, so make it f_setown and __f_setown void return functions and fix up the error handling in the callers. Cc: linux-security-module@vger.kernel.org Signed-off-by: Jeff Layton <jlayton@primarydata.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2014-08-22 11:27:32 -04:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: fasync BKL pushdown Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2008-06-19 15:50:37 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Utilize the normal socket network namespace refcounting. There is no need for tun to do the weird network namespace refcounting. The existing network namespace refcounting in tfile has almost exactly the same lifetime. So rewrite the code to use the struct sock network namespace refcounting and remove the unnecessary hand rolled network namespace refcounting and the unncesary tfile->net. This change allows the tun code to directly call sock_put bypassing sock_release and making SOCK_EXTERNALLY_ALLOCATED unnecessary. Remove the now unncessary tun_release so that if anything tries to use the sock_release code path the kernel will oops, and let us know about the bug. The macvtap code already uses it's internal socket this way. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-08 21:07:08 -05:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
net: Remove BKL from tun The lock_kernel/unlock_kernel() in cycle_kernel_lock() which is called in tun_chr_open() is not serializing against anything and safe to remove. tun_chr_fasync() is serialized by get/put_tun() and fasync_helper() has no dependency on BKL. The modification of tun->flags is racy with and without the BKL so removing it does not make it worse. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14 01:19:46 -07:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tun: Utilize the normal socket network namespace refcounting. There is no need for tun to do the weird network namespace refcounting. The existing network namespace refcounting in tfile has almost exactly the same lifetime. So rewrite the code to use the struct sock network namespace refcounting and remove the unnecessary hand rolled network namespace refcounting and the unncesary tfile->net. This change allows the tun code to directly call sock_put bypassing sock_release and making SOCK_EXTERNALLY_ALLOCATED unnecessary. Remove the now unncessary tun_release so that if anything tries to use the sock_release code path the kernel will oops, and let us know about the bug. The macvtap code already uses it's internal socket this way. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-08 21:07:08 -05:00
net: Pass kern from net_proto_family.create to sk_alloc In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-08 21:09:13 -05:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
drivers/net: Use RCU_INIT_POINTER(x, NULL) in tun.c This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24 00:02:32 +05:30
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: Add ability to create tun device with given index Tun devices cannot be created with ifidex user wants, but it's required by checkpoint-restore project. Long time ago such ability was implemented for rtnl_ops-based interface for creating links (9c7dafbf net: Allow to create links with given ifindex), but the only API for creating and managing tuntap devices is ioctl-based and is evolving with adding new ones (cde8b15f tuntap: add ioctl to attach or detach a file form tuntap device). Following that trend, here's how a new ioctl that sets the ifindex for device, that _will_ be created by TUNSETIFF ioctl looks like. So those who want a tuntap device with the ifindex N, should open the tun device, call ioctl(fd, TUNSETIFINDEX, &N), then call TUNSETIFF. If the index N is busy, then the register_netdev will find this out and the ioctl would be failed with -EBUSY. If setifindex is not called, then it will be generated as before. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21 14:31:38 +04:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
net-tun: restructure tun_do_read for better sleep/wakeup efficiency tun_do_read always adds current thread to wait queue, even if a packet is ready to read. This is inefficient because both sleeper and waker want to acquire the wait queue spin lock when packet rate is high. We restructure the read function and use common kernel networking routines to handle receive, sleep and wakeup. With the change available packets are checked first before the reading thread is added to the wait queue. Ran performance tests with the following configuration: - my packet generator -> tap1 -> br0 -> tap0 -> my packet consumer - sender pinned to one core and receiver pinned to another core - sender send small UDP packets (64 bytes total) as fast as it can - sandy bridge cores - throughput are receiver side goodput numbers The results are baseline: 731k pkts/sec, cpu utilization at 1.50 cpus changed: 783k pkts/sec, cpu utilization at 1.53 cpus The performance difference is largely determined by packet rate and inter-cpu communication cost. For example, if the sender and receiver are pinned to different cpu sockets, the results are baseline: 558k pkts/sec, cpu utilization at 1.71 cpus changed: 690k pkts/sec, cpu utilization at 1.67 cpus Co-authored-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xi Wang <xii@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 15:11:48 -07:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
tuntap: fix ambigious multiqueue API The current multiqueue API is ambigious which may confuse both user and LSM to do things correctly: - Both TUNSETIFF and TUNSETQUEUE could be used to create the queues of a tuntap device. - TUNSETQUEUE were used to disable and enable a specific queue of the device. But since the state of tuntap were completely removed from the queue, it could be used to attach to another device (there's no such kind of requirement currently, and it needs new kind of LSM policy. - TUNSETQUEUE could be used to attach to a persistent device without any queues. This kind of attching bypass the necessary checking during TUNSETIFF and may lead unexpected result. So this patch tries to make a cleaner and simpler API by: - Only allow TUNSETIFF to create queues. - TUNSETQUEUE could be only used to disable and enabled the queues of a device, and the state of the tuntap device were not detachd from the queues when it was disabled, so TUNSETQUEUE could be only used after TUNSETIFF and with the same device. This is done by introducing a list which keeps track of all queues which were disabled. The queue would be moved between this list and tfiles[] array when it was enabled/disabled. A pointer of the tun_struct were also introdued to track the device it belongs to when it was disabled. After the change, the isolation between management and application could be done through: TUNSETIFF were only called by management software and TUNSETQUEUE were only called by application.For LSM/SELinux, the things left is to do proper check during tun_set_queue() if needed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13 23:53:30 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tuntap: set SOCK_ZEROCOPY flag during open Commit 54f968d6efdbf7dec36faa44fc11f01b0e4d1990 (tuntap: move socket to tun_file) forgets to set SOCK_ZEROCOPY flag, which will prevent vhost_net from doing zercopy w/ tap. This patch fixes this by setting it during file open. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-08 14:17:41 +08:00
tun: fix a memory leak for tfile->tx_array [ Upstream commit 4df0bfc79904b7169dc77dcce44598b1545721f9 ] tfile->tun could be detached before we close the tun fd, via tun_detach_all(), so it should not be used to check for tfile->tx_array. As Jason suggested, we probably have to clean it up unconditionally both in __tun_deatch() and tun_detach_all(), but this requires to check if it is initialized or not. Currently skb_array_cleanup() doesn't have such a check, so I check it in the caller and introduce a helper function, it is a bit ugly but we can always improve it in net-next. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 1576d9860599 ("tun: switch to use skb array for tx") Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-15 11:37:29 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Introduce tun_file Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 11:00:40 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tuntap: multiqueue support This patch converts tun/tap to a multiqueue devices and expose the multiqueue queues as multiple file descriptors to userspace. Internally, each tun_file were abstracted as a queue, and an array of pointers to tun_file structurs were stored in tun_structure device, so multiple tun_files were allowed to be attached to the device as multiple queues. When choosing txq, we first try to identify a flow through its rxhash, if it does not have such one, we could try recorded rxq and then use them to choose the transmit queue. This policy may be changed in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:46:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: add device name(iff) field to proc fdinfo entry A file descriptor opened for /dev/net/tun and a tun device are connected with ioctl. Though understanding the connection is important for trouble shooting, no way is given to a user to know the connected device for a given file descriptor at userland. This patch adds a new fdinfo field for the device name connected to a file descriptor opened for /dev/net/tun. Here is an example of the field: # lsof | grep tun qemu-syst 4565 qemu 25u CHR 10,200 0t138 12921 /dev/net/tun ... # cat /proc/4565/fdinfo/25 pos: 138 flags: 0104002 iff: vnet0 # ip link show dev vnet0 8: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 ... changelog: v2: indent iff just like the other fdinfo fields are. v3: remove unused variable. Both are suggested by David Miller <davem@davemloft.net>. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-29 16:43:31 +09:00
fs: Convert show_fdinfo functions to void seq_printf functions shouldn't really check the return value. Checking seq_has_overflowed() occasionally is used instead. Update vfs documentation. Link: http://lkml.kernel.org/p/e37e6e7b76acbdcc3bb4ab2a57c8f8ca1ae11b9a.1412031505.git.joe@perches.com Cc: David S. Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Joe Perches <joe@perches.com> [ did a few clean ups ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-29 16:08:25 -07:00
tun: add device name(iff) field to proc fdinfo entry A file descriptor opened for /dev/net/tun and a tun device are connected with ioctl. Though understanding the connection is important for trouble shooting, no way is given to a user to know the connected device for a given file descriptor at userland. This patch adds a new fdinfo field for the device name connected to a file descriptor opened for /dev/net/tun. Here is an example of the field: # lsof | grep tun qemu-syst 4565 qemu 25u CHR 10,200 0t138 12921 /dev/net/tun ... # cat /proc/4565/fdinfo/25 pos: 138 flags: 0104002 iff: vnet0 # ip link show dev vnet0 8: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 ... changelog: v2: indent iff just like the other fdinfo fields are. v3: remove unused variable. Both are suggested by David Miller <davem@davemloft.net>. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-29 16:43:31 +09:00
fs: Convert show_fdinfo functions to void seq_printf functions shouldn't really check the return value. Checking seq_has_overflowed() occasionally is used instead. Update vfs documentation. Link: http://lkml.kernel.org/p/e37e6e7b76acbdcc3bb4ab2a57c8f8ca1ae11b9a.1412031505.git.joe@perches.com Cc: David S. Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Joe Perches <joe@perches.com> [ did a few clean ups ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-29 16:08:25 -07:00
tun: add device name(iff) field to proc fdinfo entry A file descriptor opened for /dev/net/tun and a tun device are connected with ioctl. Though understanding the connection is important for trouble shooting, no way is given to a user to know the connected device for a given file descriptor at userland. This patch adds a new fdinfo field for the device name connected to a file descriptor opened for /dev/net/tun. Here is an example of the field: # lsof | grep tun qemu-syst 4565 qemu 25u CHR 10,200 0t138 12921 /dev/net/tun ... # cat /proc/4565/fdinfo/25 pos: 138 flags: 0104002 iff: vnet0 # ip link show dev vnet0 8: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 ... changelog: v2: indent iff just like the other fdinfo fields are. v3: remove unused variable. Both are suggested by David Miller <davem@davemloft.net>. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-29 16:43:31 +09:00
[PATCH] mark struct file_operations const 5 Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 00:55:34 -08:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
switch drivers/net/tun.c to ->read_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-07 13:52:07 -05:00
{macvtap,tun}_get_user(): switch to iov_iter allows to switch macvtap and tun from ->aio_write() to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-19 15:36:49 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net/tun: handle compat_ioctl directly The tun driver is the only code in the kernel that operates on a character device with struct ifreq. Change the driver to handle the conversion itself so we can contain the remaining ifreq handling in the socket layer. This also fixes a bug in the handling of invalid ioctl numbers on an unbound tun device. The driver treats this as a TUNSETIFF in native mode, but there is no way for the generic compat_ioctl() function to emulate this behaviour. Possibly the driver was only doing this accidentally anyway, but if any code relies on this misfeature, it now also works in compat mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06 22:52:32 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: add device name(iff) field to proc fdinfo entry A file descriptor opened for /dev/net/tun and a tun device are connected with ioctl. Though understanding the connection is important for trouble shooting, no way is given to a user to know the connected device for a given file descriptor at userland. This patch adds a new fdinfo field for the device name connected to a file descriptor opened for /dev/net/tun. Here is an example of the field: # lsof | grep tun qemu-syst 4565 qemu 25u CHR 10,200 0t138 12921 /dev/net/tun ... # cat /proc/4565/fdinfo/25 pos: 138 flags: 0104002 iff: vnet0 # ip link show dev vnet0 8: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 ... changelog: v2: indent iff just like the other fdinfo fields are. v3: remove unused variable. Both are suggested by David Miller <davem@davemloft.net>. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-29 16:43:31 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Driver-Core: extend devnode callbacks to provide permissions This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-18 23:01:12 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: tun: use new api ethtool_{get|set}_link_ksettings The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-11 22:03:50 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: tun: use new api ethtool_{get|set}_link_ksettings The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-11 22:03:50 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: sweep-up some straglers in strlcpy conversion of .get_drvinfo routines Convert some remaining straglers' .get_drvinfo routines to use strlcpy rather than strcpy/strncpy. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-15 14:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
net: sweep-up some straglers in strlcpy conversion of .get_drvinfo routines Convert some remaining straglers' .get_drvinfo routines to use strlcpy rather than strcpy/strncpy. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-15 14:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: drop most type defines It's just as easy to use IFF_ flags directly, there's no point in adding our own defines. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-19 15:17:31 +02:00
net: sweep-up some straglers in strlcpy conversion of .get_drvinfo routines Convert some remaining straglers' .get_drvinfo routines to use strlcpy rather than strcpy/strncpy. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-15 14:59:53 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: rx batching We can only process 1 packet at one time during sendmsg(). This often lead bad cache utilization under heavy load. So this patch tries to do some batching during rx before submitting them to host network stack. This is done through accepting MSG_MORE as a hint from sendmsg() caller, if it was set, batch the packet temporarily in a linked list and submit them all once MSG_MORE were cleared. Tests were done by pktgen (burst=128) in guest over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% User were allowed to change per device batched packets through ethtool -C rx-frames. NAPI_POLL_WEIGHT were used as upper limitation to prevent bh from being disabled too long. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 15:02:03 +08:00
drivers/net: const-ify ethtool_ops declarations Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 14:30:00 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: keep link (carrier) state up to date Currently, only ethtool can get accurate link state of a tap device. With this patch, IFF_RUNNING and IF_OPER_UP/DOWN are kept up to date as well. Signed-off-by: Nolan Leake <nolan@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27 13:53:43 +00:00
tun: Support software transmit time stamping. This patch adds transmit time stamping to the tun/tap driver. Similar support already exists for UDP, can, and raw packets. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-19 19:40:10 +02:00
tun: rx batching We can only process 1 packet at one time during sendmsg(). This often lead bad cache utilization under heavy load. So this patch tries to do some batching during rx before submitting them to host network stack. This is done through accepting MSG_MORE as a hint from sendmsg() caller, if it was set, batch the packet temporarily in a linked list and submit them all once MSG_MORE were cleared. Tests were done by pktgen (burst=128) in guest over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% User were allowed to change per device batched packets through ethtool -C rx-frames. NAPI_POLL_WEIGHT were used as upper limitation to prevent bh from being disabled too long. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 15:02:03 +08:00
net: tun: use new api ethtool_{get|set}_link_ksettings The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-11 22:03:50 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun/tap: use paren's with sizeof Although sizeof is an operator in C. The kernel coding style convention is to always use it like a function and add parenthesis. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:29:16 -07:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun: Don't assume type tun in tun_device_event The referenced change added a netlink notifier for processing device queue size events. These events are fired for all devices but the registered callback assumed they only occurred for tun devices. This fix adds a check (borrowed from macvtap.c) to discard non-tun device events. For reference, this fixes the following splat: [ 71.505935] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 71.513870] IP: [<ffffffff8153c1a0>] tun_device_event+0x110/0x340 [ 71.519906] PGD 3f41f56067 PUD 3f264b7067 PMD 0 [ 71.524497] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 71.529374] gsmi: Log Shutdown Reason 0x03 [ 71.533417] Modules linked in:[ 71.533826] mlx4_en: eth1: Link Up [ 71.539616] bonding w1_therm wire cdc_acm ehci_pci ehci_hcd mlx4_en ib_uverbs mlx4_ib ib_core mlx4_core [ 71.549282] CPU: 12 PID: 7915 Comm: set.ixion-haswe Not tainted 4.7.0-dbx-DEV #8 [ 71.556586] Hardware name: Intel Grantley,Wellsburg/Ixion_IT_15, BIOS 2.58.0 05/03/2016 [ 71.564495] task: ffff887f00bb20c0 ti: ffff887f00798000 task.ti: ffff887f00798000 [ 71.571894] RIP: 0010:[<ffffffff8153c1a0>] [<ffffffff8153c1a0>] tun_device_event+0x110/0x340 [ 71.580327] RSP: 0018:ffff887f0079bbd8 EFLAGS: 00010202 [ 71.585576] RAX: fffffffffffffae8 RBX: ffff887ef6d03378 RCX: 0000000000000000 [ 71.592624] RDX: 0000000000000000 RSI: 0000000000000028 RDI: 0000000000000000 [ 71.599675] RBP: ffff887f0079bc48 R08: 0000000000000000 R09: 0000000000000001 [ 71.606730] R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000010 [ 71.613780] R13: 0000000000000000 R14: 0000000000000001 R15: ffff887f0079bd00 [ 71.620832] FS: 00007f5cdc581700(0000) GS:ffff883f7f700000(0000) knlGS:0000000000000000 [ 71.628826] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.634500] CR2: 0000000000000010 CR3: 0000003f3eb62000 CR4: 00000000001406e0 [ 71.641549] Stack: [ 71.643533] ffff887f0079bc08 0000000000000246 000000000000001e ffff887ef6d00000 [ 71.650871] ffff887f0079bd00 0000000000000000 0000000000000000 ffffffff00000000 [ 71.658210] ffff887f0079bc48 ffffffff81d24070 00000000fffffff9 ffffffff81cec7a0 [ 71.665549] Call Trace: [ 71.667975] [<ffffffff810eeb0d>] notifier_call_chain+0x5d/0x80 [ 71.673823] [<ffffffff816365d0>] ? show_tx_maxrate+0x30/0x30 [ 71.679502] [<ffffffff810eeb3e>] __raw_notifier_call_chain+0xe/0x10 [ 71.685778] [<ffffffff810eeb56>] raw_notifier_call_chain+0x16/0x20 [ 71.691976] [<ffffffff8160eb30>] call_netdevice_notifiers_info+0x40/0x70 [ 71.698681] [<ffffffff8160ec36>] call_netdevice_notifiers+0x16/0x20 [ 71.704956] [<ffffffff81636636>] change_tx_queue_len+0x66/0x90 [ 71.710807] [<ffffffff816381ef>] netdev_store.isra.5+0xbf/0xd0 [ 71.716658] [<ffffffff81638350>] tx_queue_len_store+0x50/0x60 [ 71.722431] [<ffffffff814a6798>] dev_attr_store+0x18/0x30 [ 71.727857] [<ffffffff812ea3ff>] sysfs_kf_write+0x4f/0x70 [ 71.733274] [<ffffffff812e9507>] kernfs_fop_write+0x147/0x1d0 [ 71.739045] [<ffffffff81134a4f>] ? rcu_read_lock_sched_held+0x8f/0xa0 [ 71.745499] [<ffffffff8125a108>] __vfs_write+0x28/0x120 [ 71.750748] [<ffffffff8111b137>] ? percpu_down_read+0x57/0x90 [ 71.756516] [<ffffffff8125d7d8>] ? __sb_start_write+0xc8/0xe0 [ 71.762278] [<ffffffff8125d7d8>] ? __sb_start_write+0xc8/0xe0 [ 71.768038] [<ffffffff8125bd5e>] vfs_write+0xbe/0x1b0 [ 71.773113] [<ffffffff8125c092>] SyS_write+0x52/0xa0 [ 71.778110] [<ffffffff817528e5>] entry_SYSCALL_64_fastpath+0x18/0xa8 [ 71.784472] Code: 45 31 f6 48 8b 93 78 33 00 00 48 81 c3 78 33 00 00 48 39 d3 48 8d 82 e8 fa ff ff 74 25 48 8d b0 40 05 00 00 49 63 d6 41 83 c6 01 <49> 89 34 d4 48 8b 90 18 05 00 00 48 39 d3 48 8d 82 e8 fa ff ff [ 71.803655] RIP [<ffffffff8153c1a0>] tun_device_event+0x110/0x340 [ 71.809769] RSP <ffff887f0079bbd8> [ 71.813213] CR2: 0000000000000010 [ 71.816512] ---[ end trace 4db6449606319f73 ]--- Fixes: 1576d9860599 ("tun: switch to use skb array for tx") Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-06 18:44:20 -04:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
[TUN]: Introduce the tun_net structure and init/exit net ops. This is the first step in making tuntap devices work in net namespaces. The structure mentioned is pointed by generic net pointer with tun_net_id id, and tun driver fills one on its load. It will contain only the tun devices list. So declare this structure and introduce net init and exit hooks. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 00:40:46 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: Implement ip link del tunXXX This greatly simplifies testing to verify I have fixed the problems with a tun device disappearing when the tun file descriptor is still held open. Further it allows removal network namespace operations for the tun driver. Reducing the network namespace handling in the driver to the minimum. i.e. When we are creating a tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 16:02:16 -08:00
[TUN]: Introduce the tun_net structure and init/exit net ops. This is the first step in making tuntap devices work in net namespaces. The structure mentioned is pointed by generic net pointer with tun_net_id id, and tun driver fills one on its load. It will contain only the tun devices list. So declare this structure and introduce net init and exit hooks. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 00:40:46 -07:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
tun: Implement ip link del tunXXX This greatly simplifies testing to verify I have fixed the problems with a tun device disappearing when the tun file descriptor is still held open. Further it allows removal network namespace operations for the tun driver. Reducing the network namespace handling in the driver to the minimum. i.e. When we are creating a tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 16:02:16 -08:00
[TUN]: Introduce the tun_net structure and init/exit net ops. This is the first step in making tuntap devices work in net namespaces. The structure mentioned is pointed by generic net pointer with tun_net_id id, and tun driver fills one on its load. It will contain only the tun devices list. So declare this structure and introduce net init and exit hooks. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 00:40:46 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[TUN]: Introduce the tun_net structure and init/exit net ops. This is the first step in making tuntap devices work in net namespaces. The structure mentioned is pointed by generic net pointer with tun_net_id id, and tun driver fills one on its load. It will contain only the tun devices list. So declare this structure and introduce net init and exit hooks. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 00:40:46 -07:00
tun: Convert logging messages to pr_<level> and tun_debug Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 07:18:10 +00:00
[TUN]: Introduce the tun_net structure and init/exit net ops. This is the first step in making tuntap devices work in net namespaces. The structure mentioned is pointed by generic net pointer with tun_net_id id, and tun driver fills one on its load. It will contain only the tun devices list. So declare this structure and introduce net init and exit hooks. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 00:40:46 -07:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
tun/tap: Add the missed return value check of register_netdevice_notifier There is some codes of tun/tap module which did not check the return value of register_netdevice_notifier. Add the check now. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 02:41:34 -07:00
tun: Implement ip link del tunXXX This greatly simplifies testing to verify I have fixed the problems with a tun device disappearing when the tun file descriptor is still held open. Further it allows removal network namespace operations for the tun driver. Reducing the network namespace handling in the driver to the minimum. i.e. When we are creating a tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 16:02:16 -08:00
tun/tap: Add the missed return value check of register_netdevice_notifier There is some codes of tun/tap module which did not check the return value of register_netdevice_notifier. Add the check now. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 02:41:34 -07:00
[TUN]: Introduce the tun_net structure and init/exit net ops. This is the first step in making tuntap devices work in net namespaces. The structure mentioned is pointed by generic net pointer with tun_net_id id, and tun driver fills one on its load. It will contain only the tun devices list. So declare this structure and introduce net init and exit hooks. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 00:40:46 -07:00
tun: Implement ip link del tunXXX This greatly simplifies testing to verify I have fixed the problems with a tun device disappearing when the tun file descriptor is still held open. Further it allows removal network namespace operations for the tun driver. Reducing the network namespace handling in the driver to the minimum. i.e. When we are creating a tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 16:02:16 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
tun: Implement ip link del tunXXX This greatly simplifies testing to verify I have fixed the problems with a tun device disappearing when the tun file descriptor is still held open. Further it allows removal network namespace operations for the tun driver. Reducing the network namespace handling in the driver to the minimum. i.e. When we are creating a tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 16:02:16 -08:00
tun: switch to use skb array for tx We used to queue tx packets in sk_receive_queue, this is less efficient since it requires spinlocks to synchronize between producer and consumer. This patch tries to address this by: - switch from sk_receive_queue to a skb_array, and resize it when tx_queue_len was changed. - introduce a new proto_ops peek_len which was used for peeking the skb length. - implement a tun version of peek_len for vhost_net to use and convert vhost_net to use peek_len if possible. Pktgen test shows about 15.3% improvement on guest receiving pps for small buffers: Before: ~1300000pps After : ~1500000pps Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 14:45:36 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tuntap: RCUify dereferencing between tun_struct and tun_file RCU were introduced in this patch to synchronize the dereferences between tun_struct and tun_file. All tun_{get|put} were replaced with RCU, the dereference from one to other must be done under rtnl lock or rcu read critical region. This is needed for the following patches since the one of the goal of multiqueue tuntap is to allow adding or removing queues during workload. Without RCU, control path would hold tx locks when adding or removing queues (which may cause sme delay) and it's hard to change the number of queues without stopping the net device. With the help of rcu, there's also no need for tun_file hold an refcnt to tun_struct. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:58 +00:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tuntap: move socket to tun_file Current tuntap makes use of the socket receive queue as its tx queue. To implement multiple tx queues for tuntap and enable the ability of adding and removing queues during workload, the first step is to move the socket related structures to tun_file. Then we could let multiple fds/sockets to be attached to the tuntap. This patch removes tun_sock and moves socket related structures from tun_sock or tun_struct to tun_file. Two exceptions are tap_filter and sock_fprog, they are still kept in tun_structure since they are used to filter packets for the net device instead of per transmit queue (at least I see no requirements for them). After those changes, socket were created and destroyed during file open and close (instead of device creation and destroy), the socket structures could be dereferenced from tun_file instead of the file of tun_struct structure itself. For persisent device, since we purge during datching and wouldn't queue any packets when no interface were attached, there's no behaviod changes before and after this patch, so the changes were transparent to the userspace. To keep the attributes such as sndbuf, socket filter and vnet header, those would be re-initialize after a new interface were attached to an persist device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 19:45:57 +00:00
tun: export underlying socket Tun device looks similar to a packet socket in that both pass complete frames from/to userspace. This patch fills in enough fields in the socket underlying tun driver to support sendmsg/recvmsg operations, and message flags MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket to modules. Regular read/write behaviour is unchanged. This way, code using raw sockets to inject packets into a physical device, can support injecting packets into host network stack almost without modification. First user of this interface will be vhost virtualization accelerator. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 06:17:09 +00:00
tun: export skb_array This patch exports skb_array through tun_get_skb_array(). Caller can then manipulate skb array directly. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17 12:14:41 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
driver core: add devname module aliases to allow module on-demand auto-loading This adds: alias: devname:<name> to some common kernel modules, which will allow the on-demand loading of the kernel module when the device node is accessed. Ideally all these modules would be compiled-in, but distros seems too much in love with their modularization that we need to cover the common cases with this new facility. It will allow us to remove a bunch of pretty useless init scripts and modprobes from init scripts. The static device node aliases will be carried in the module itself. The program depmod will extract this information to a file in the module directory: $ cat /lib/modules/2.6.34-00650-g537b60d-dirty/modules.devname # Device nodes to trigger on-demand module loading. microcode cpu/microcode c10:184 fuse fuse c10:229 ppp_generic ppp c108:0 tun net/tun c10:200 dm_mod mapper/control c10:235 Udev will pick up the depmod created file on startup and create all the static device nodes which the kernel modules specify, so that these modules get automatically loaded when the device node is accessed: $ /sbin/udevd --debug ... static_dev_create_from_modules: mknod '/dev/cpu/microcode' c10:184 static_dev_create_from_modules: mknod '/dev/fuse' c10:229 static_dev_create_from_modules: mknod '/dev/ppp' c108:0 static_dev_create_from_modules: mknod '/dev/net/tun' c10:200 static_dev_create_from_modules: mknod '/dev/mapper/control' c10:235 udev_rules_apply_static_dev_perms: chmod '/dev/net/tun' 0666 udev_rules_apply_static_dev_perms: chmod '/dev/fuse' 0666 A few device nodes are switched to statically allocated numbers, to allow the static nodes to work. This might also useful for systems which still run a plain static /dev, which is completely unsafe to use with any dynamic minor numbers. Note: The devname aliases must be limited to the *common* and *single*instance* device nodes, like the misc devices, and never be used for conceptually limited systems like the loop devices, which should rather get fixed properly and get a control node for losetup to talk to, instead of creating a random number of device nodes in advance, regardless if they are ever used. This facility is to hide the mess distros are creating with too modualized kernels, and just to hide that these modules are not compiled-in, and not to paper-over broken concepts. Thanks! :) Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: David S. Miller <davem@davemloft.net> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Ian Kent <raven@themaw.net> Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 18:07:20 +02:00