kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-26 18:16:26 +00:00
Code Issues Releases Packages Activity
linux/drivers/misc/enclosure.c

696 lines
19 KiB
Raw Permalink Normal View History

[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] ses: fix hotplug with multiple devices and expanders In a situation either with expanders or with multiple enclosure devices, hot add doesn't always work. This is because we try to find a single enclosure device attached to the host. Fix this by looping over all enclosure devices attached to the host and also by making the find loop recognise that the enclosure devices may be expander remote (i.e. not parented by the host). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-01 00:39:36 +00:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] ses: fix hotplug with multiple devices and expanders In a situation either with expanders or with multiple enclosure devices, hot add doesn't always work. This is because we try to find a single enclosure device attached to the host. Fix this by looping over all enclosure devices attached to the host and also by making the find loop recognise that the enclosure devices may be expander remote (i.e. not parented by the host). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-01 00:39:36 +00:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] ses: fix hotplug with multiple devices and expanders In a situation either with expanders or with multiple enclosure devices, hot add doesn't always work. This is because we try to find a single enclosure device attached to the host. Fix this by looping over all enclosure devices attached to the host and also by making the find loop recognise that the enclosure devices may be expander remote (i.e. not parented by the host). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-01 00:39:36 +00:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] ses: fix hotplug with multiple devices and expanders In a situation either with expanders or with multiple enclosure devices, hot add doesn't always work. This is because we try to find a single enclosure device attached to the host. Fix this by looping over all enclosure devices attached to the host and also by making the find loop recognise that the enclosure devices may be expander remote (i.e. not parented by the host). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-01 00:39:36 +00:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] ses: fix problems caused by empty SES provided name We use the name provided by SES to name objects. An empty name is legal in SES but causes problems in our generic device hierarchy. Fix this by falling back to a number if the name is either NULL or empty. Also fix a secondary bug spotted in that dev_set_name(dev, name) uses a string format and so would go wrong if name contained a '%'. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-30 19:13:41 -07:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
ses: add reliable slot attribute The name provided by firmware is in a vendor specific format, publish the slot number to have a reliable mechanism for identifying slots across firmware implementations. If the enclosure does not provide a slot number fallback to the component number which is guaranteed unique, and usually mirrors the slot number. Cleaned up the unused ses_component.desc in the process. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:17 -08:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
ses: add reliable slot attribute The name provided by firmware is in a vendor specific format, publish the slot number to have a reliable mechanism for identifying slots across firmware implementations. If the enclosure does not provide a slot number fallback to the component number which is guaranteed unique, and usually mirrors the slot number. Cleaned up the unused ses_component.desc in the process. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:17 -08:00
scsi: ses: don't get power status of SES device slot on probe The commit 08024885a2a3 ("ses: Add power_status to SES device slot") introduced the 'power_status' attribute to enclosure components and the associated callbacks. There are 2 callbacks available to get the power status of a device: 1) ses_get_power_status() for 'struct enclosure_component_callbacks' 2) get_component_power_status() for the sysfs device attribute (these are available for kernel-space and user-space, respectively.) However, despite both methods being available to get power status on demand, that commit also introduced a call to get power status in ses_enclosure_data_process(). This dramatically increased the total probe time for SCSI devices on larger configurations, because ses_enclosure_data_process() is called several times during the SCSI devices probe and loops over the component devices (but that is another problem, another patch). That results in a tremendous continuous hammering of SCSI Receive Diagnostics commands to the enclosure-services device, which does delay the total probe time for the SCSI devices __significantly__: Originally, ~34 minutes on a system attached to ~170 disks: [ 9214.490703] mpt3sas version 13.100.00.00 loaded ... [11256.580231] scsi 17:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) With this patch, it decreased to ~2.5 minutes -- a 13.6x faster [ 1002.992533] mpt3sas version 13.100.00.00 loaded ... [ 1151.978831] scsi 11:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) Back to the commit discussion.. on the ses_get_power_status() call introduced in ses_enclosure_data_process(): impact of removing it. That may possibly be in place to initialize the power status value on device probe. However, those 2 functions available to retrieve that value _do_ automatically refresh/update it. So the potential benefit would be a direct access of the 'power_status' field which does not use the callbacks... But the only reader of 'struct enclosure_component::power_status' is the get_component_power_status() callback for sysfs attribute, and it _does_ check for and call the .get_power_status callback, (which indeed is defined and implemented by that commit), so the power status value is, again, automatically updated. So, the remaining potential for a direct/non-callback access to the power_status attribute would be out-of-tree modules -- well, for those, if they are for whatever reason interested in values that are set during device probe and not up-to-date by the time they need it.. well, that would be curious. Well, to handle that more properly, set the initial power state value to '-1' (i.e., uninitialized) instead of '1' (power 'on'), and check for it in that callback which may do an direct access to the field value _if_ a callback function is not defined. Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Fixes: 08024885a2a3 ("ses: Add power_status to SES device slot") Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Song Liu <songliubraving@fb.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-05 12:18:19 -03:00
ses: add reliable slot attribute The name provided by firmware is in a vendor specific format, publish the slot number to have a reliable mechanism for identifying slots across firmware implementations. If the enclosure does not provide a slot number fallback to the component number which is guaranteed unique, and usually mirrors the slot number. Cleaned up the unused ses_component.desc in the process. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:17 -08:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
enclosure: handle non-unique element descriptors Some SES devices give non-unique Element Descriptors as part of the Element Descriptor diag page. Since we use these for creating sysfs entries, they need to be unique. The specification doesn't require these to be unique. Eg: $ sg_ses -p 7 /dev/sg0 FTS CORP TXS6_SAS20BPX12 0500 enclosure services device Element descriptor In diagnostic page: generation code: 0x0 element descriptor by type list Element type: Array device, subenclosure id: 0 Overall descriptor: ArrayDevicesInSubEnclsr0 Element 1 descriptor: ArrayDevice00 Element 2 descriptor: ArrayDevice01 Element 3 descriptor: ArrayDevice02 Element 4 descriptor: ArrayDevice03 Element 5 descriptor: ArrayDevice03 Element 6 descriptor: ArrayDevice03 Element 7 descriptor: ArrayDevice03 Element 8 descriptor: ArrayDevice03 Element 9 descriptor: ArrayDevice03 Element 10 descriptor: ArrayDevice03 Element 11 descriptor: ArrayDevice03 Element 12 descriptor: ArrayDevice03 Based on http://thread.gmane.org/gmane.linux.scsi/69289. This version implements James' ideas about the naming convention Signed-off-by: Markus Stockhausen <stockhausen@collogia.de> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-10-04 13:35:15 +00:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
[SCSI] struct device - replace bus_id with dev_name(), dev_set_name() [jejb: limit ioctl to returning 20 characters to avoid overrun on long device names and add a few more conversions] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-03 22:41:36 +01:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
enclosure: fix WARN_ON removing an adapter in multi-path devices We have peculiar problems with multi-path and enclosures: physically, we know each bay can only be occupied by a single disk device. However in multi-path, it appears we have many (because each path to the device appears in Linux as a different kernel device). We try to fix this by only having the last seen device show up in the bay. Sysfs gets very annoyed if we try to manipulate links when the kobject sysfs directory (kobj.sd) doesn't exist and drops a huge WARN_ON which most users panic and report an oops for. This happens on a few path removal situations and IBM reports seeing it when one of their multi-path adapters is removed. Add a check to enclosure device removal for the existence the sysfs directory containing both the forward and back links so that the remnants (if any) get removed in either direction but no scary warnings are dumped. Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-03-18 15:56:16 -07:00
[SCSI] enclosure: fix WARN_ON in dual path device removing Bug report from: wenxiong@linux.vnet.ibm.com The issue is happened in dual controller configuration. We got the sysfs warnings when rmmod the ipr module. enclosure_unregister() in drivers/msic/enclosure.c, call device_unregister() for each componment deivce, device_unregister() ->device_del()->kobject_del() ->sysfs_remove_dir(). In sysfs_remove_dir(), set kobj->sd = NULL. For each componment device, enclosure_component_release()->enclosure_remove_links()->sysfs_remove_link() in which checking kobj->sd again, it has been set as NULL when doing device_unregister. So we saw all these sysfs WARNING. Tested-by: wenxiong@linux.vnet.ibm.com Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-11-15 14:58:00 -08:00
enclosure: fix WARN_ON removing an adapter in multi-path devices We have peculiar problems with multi-path and enclosures: physically, we know each bay can only be occupied by a single disk device. However in multi-path, it appears we have many (because each path to the device appears in Linux as a different kernel device). We try to fix this by only having the last seen device show up in the bay. Sysfs gets very annoyed if we try to manipulate links when the kobject sysfs directory (kobj.sd) doesn't exist and drops a huge WARN_ON which most users panic and report an oops for. This happens on a few path removal situations and IBM reports seeing it when one of their multi-path adapters is removed. Add a check to enclosure device removal for the existence the sysfs directory containing both the forward and back links so that the remnants (if any) get removed in either direction but no scary warnings are dumped. Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-03-18 15:56:16 -07:00
[SCSI] enclosure: fix WARN_ON in dual path device removing Bug report from: wenxiong@linux.vnet.ibm.com The issue is happened in dual controller configuration. We got the sysfs warnings when rmmod the ipr module. enclosure_unregister() in drivers/msic/enclosure.c, call device_unregister() for each componment deivce, device_unregister() ->device_del()->kobject_del() ->sysfs_remove_dir(). In sysfs_remove_dir(), set kobj->sd = NULL. For each componment device, enclosure_component_release()->enclosure_remove_links()->sysfs_remove_link() in which checking kobj->sd again, it has been set as NULL when doing device_unregister. So we saw all these sysfs WARNING. Tested-by: wenxiong@linux.vnet.ibm.com Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-11-15 14:58:00 -08:00
enclosure: fix WARN_ON removing an adapter in multi-path devices We have peculiar problems with multi-path and enclosures: physically, we know each bay can only be occupied by a single disk device. However in multi-path, it appears we have many (because each path to the device appears in Linux as a different kernel device). We try to fix this by only having the last seen device show up in the bay. Sysfs gets very annoyed if we try to manipulate links when the kobject sysfs directory (kobj.sd) doesn't exist and drops a huge WARN_ON which most users panic and report an oops for. This happens on a few path removal situations and IBM reports seeing it when one of their multi-path adapters is removed. Add a check to enclosure device removal for the existence the sysfs directory containing both the forward and back links so that the remnants (if any) get removed in either direction but no scary warnings are dumped. Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-03-18 15:56:16 -07:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
enclosure: handle non-unique element descriptors Some SES devices give non-unique Element Descriptors as part of the Element Descriptor diag page. Since we use these for creating sysfs entries, they need to be unique. The specification doesn't require these to be unique. Eg: $ sg_ses -p 7 /dev/sg0 FTS CORP TXS6_SAS20BPX12 0500 enclosure services device Element descriptor In diagnostic page: generation code: 0x0 element descriptor by type list Element type: Array device, subenclosure id: 0 Overall descriptor: ArrayDevicesInSubEnclsr0 Element 1 descriptor: ArrayDevice00 Element 2 descriptor: ArrayDevice01 Element 3 descriptor: ArrayDevice02 Element 4 descriptor: ArrayDevice03 Element 5 descriptor: ArrayDevice03 Element 6 descriptor: ArrayDevice03 Element 7 descriptor: ArrayDevice03 Element 8 descriptor: ArrayDevice03 Element 9 descriptor: ArrayDevice03 Element 10 descriptor: ArrayDevice03 Element 11 descriptor: ArrayDevice03 Element 12 descriptor: ArrayDevice03 Based on http://thread.gmane.org/gmane.linux.scsi/69289. This version implements James' ideas about the naming convention Signed-off-by: Markus Stockhausen <stockhausen@collogia.de> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-10-04 13:35:15 +00:00
enclosure: convert class code to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the enclosure class code to use the correct field. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:16 -07:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
ses: close potential registration race The slot and address fields have a small window of instability when userspace can read them before initialization. Separate enclosure_component allocation from registration. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:14 -08:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
ses: close potential registration race The slot and address fields have a small window of instability when userspace can read them before initialization. Separate enclosure_component allocation from registration. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:14 -08:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
ses: close potential registration race The slot and address fields have a small window of instability when userspace can read them before initialization. Separate enclosure_component allocation from registration. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:14 -08:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
ses: close potential registration race The slot and address fields have a small window of instability when userspace can read them before initialization. Separate enclosure_component allocation from registration. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:14 -08:00
enclosure: handle non-unique element descriptors Some SES devices give non-unique Element Descriptors as part of the Element Descriptor diag page. Since we use these for creating sysfs entries, they need to be unique. The specification doesn't require these to be unique. Eg: $ sg_ses -p 7 /dev/sg0 FTS CORP TXS6_SAS20BPX12 0500 enclosure services device Element descriptor In diagnostic page: generation code: 0x0 element descriptor by type list Element type: Array device, subenclosure id: 0 Overall descriptor: ArrayDevicesInSubEnclsr0 Element 1 descriptor: ArrayDevice00 Element 2 descriptor: ArrayDevice01 Element 3 descriptor: ArrayDevice02 Element 4 descriptor: ArrayDevice03 Element 5 descriptor: ArrayDevice03 Element 6 descriptor: ArrayDevice03 Element 7 descriptor: ArrayDevice03 Element 8 descriptor: ArrayDevice03 Element 9 descriptor: ArrayDevice03 Element 10 descriptor: ArrayDevice03 Element 11 descriptor: ArrayDevice03 Element 12 descriptor: ArrayDevice03 Based on http://thread.gmane.org/gmane.linux.scsi/69289. This version implements James' ideas about the naming convention Signed-off-by: Markus Stockhausen <stockhausen@collogia.de> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-10-04 13:35:15 +00:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
enclosure: handle non-unique element descriptors Some SES devices give non-unique Element Descriptors as part of the Element Descriptor diag page. Since we use these for creating sysfs entries, they need to be unique. The specification doesn't require these to be unique. Eg: $ sg_ses -p 7 /dev/sg0 FTS CORP TXS6_SAS20BPX12 0500 enclosure services device Element descriptor In diagnostic page: generation code: 0x0 element descriptor by type list Element type: Array device, subenclosure id: 0 Overall descriptor: ArrayDevicesInSubEnclsr0 Element 1 descriptor: ArrayDevice00 Element 2 descriptor: ArrayDevice01 Element 3 descriptor: ArrayDevice02 Element 4 descriptor: ArrayDevice03 Element 5 descriptor: ArrayDevice03 Element 6 descriptor: ArrayDevice03 Element 7 descriptor: ArrayDevice03 Element 8 descriptor: ArrayDevice03 Element 9 descriptor: ArrayDevice03 Element 10 descriptor: ArrayDevice03 Element 11 descriptor: ArrayDevice03 Element 12 descriptor: ArrayDevice03 Based on http://thread.gmane.org/gmane.linux.scsi/69289. This version implements James' ideas about the naming convention Signed-off-by: Markus Stockhausen <stockhausen@collogia.de> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-10-04 13:35:15 +00:00
[SCSI] struct device - replace bus_id with dev_name(), dev_set_name() [jejb: limit ioctl to returning 20 characters to avoid overrun on long device names and add a few more conversions] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-03 22:41:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
enclosure: convert class code to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the enclosure class code to use the correct field. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:16 -07:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
ses: close potential registration race The slot and address fields have a small window of instability when userspace can read them before initialization. Separate enclosure_component allocation from registration. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:14 -08:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: fix error path - actually return ERR_PTR() on error we also need to clean up and free the cdev. Reported-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-12 16:14:42 -06:00
ses: close potential registration race The slot and address fields have a small window of instability when userspace can read them before initialization. Separate enclosure_component allocation from registration. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:14 -08:00
[SCSI] enclosure: fix error path - actually return ERR_PTR() on error we also need to clean up and free the cdev. Reported-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-12 16:14:42 -06:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
ses: close potential registration race The slot and address fields have a small window of instability when userspace can read them before initialization. Separate enclosure_component allocation from registration. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:14 -08:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails. The enclosure_add_device() function should fail if it can't create the relevant sysfs links. Cc: <stable@vger.kernel.org> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Tested-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-27 11:53:27 +02:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] ses: update enclosure data on hot add Now that hot add works correctly, if a new device is added, we're still operating on stale enclosure data, so fix that by updating the enclosure diagnostic pages when we get notified of a device hot add Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-01 00:43:59 +00:00
scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails. The enclosure_add_device() function should fail if it can't create the relevant sysfs links. Cc: <stable@vger.kernel.org> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Tested-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-27 11:53:27 +02:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails. The enclosure_add_device() function should fail if it can't create the relevant sysfs links. Cc: <stable@vger.kernel.org> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Tested-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-27 11:53:27 +02:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails. The enclosure_add_device() function should fail if it can't create the relevant sysfs links. Cc: <stable@vger.kernel.org> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Tested-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-27 11:53:27 +02:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] ses: add support for enclosure component hot removal Right at the moment, hot removal of a device within an enclosure does nothing (because the intf_remove only copes with enclosure removal not with component removal). Fix this by adding a function to remove the component. Also needed to fix the prototype of enclosure_remove_device, since we know the device we've removed but not the internal component number Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-01 00:41:22 +00:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] ses: add support for enclosure component hot removal Right at the moment, hot removal of a device within an enclosure does nothing (because the intf_remove only copes with enclosure removal not with component removal). Fix this by adding a function to remove the component. Also needed to fix the prototype of enclosure_remove_device, since we know the device we've removed but not the internal component number Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-01 00:41:22 +00:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] ses: add support for enclosure component hot removal Right at the moment, hot removal of a device within an enclosure does nothing (because the intf_remove only copes with enclosure removal not with component removal). Fix this by adding a function to remove the component. Also needed to fix the prototype of enclosure_remove_device, since we know the device we've removed but not the internal component number Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-01 00:41:22 +00:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] ses: add support for enclosure component hot removal Right at the moment, hot removal of a device within an enclosure does nothing (because the intf_remove only copes with enclosure removal not with component removal). Fix this by adding a function to remove the component. Also needed to fix the prototype of enclosure_remove_device, since we know the device we've removed but not the internal component number Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-01 00:41:22 +00:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
enclosure: convert class code to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the enclosure class code to use the correct field. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:16 -07:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
enclosure: convert class code to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the enclosure class code to use the correct field. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:16 -07:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
ses: add enclosure logical id Export the NAA logical id for the enclosure. This is optionally available from the sas_transport_class, but it is really a property of the enclosure. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:16 -08:00
enclosure: convert class code to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the enclosure class code to use the correct field. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:16 -07:00
ses: add enclosure logical id Export the NAA logical id for the enclosure. This is optionally available from the sas_transport_class, but it is really a property of the enclosure. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:16 -08:00
enclosure: convert class code to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the enclosure class code to use the correct field. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:16 -07:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
enclosure: convert class code to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the enclosure class code to use the correct field. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:16 -07:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
enclosure: convert class code to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the enclosure class code to use the correct field. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:16 -07:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
misc: enclosure: Fix space before '[' error Fix checkpatch.pl error: ERROR: space prohibited before open square bracket '['. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-29 18:38:31 +05:30
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] enclosure: fix oops while iterating enclosure_status array Based on patch originally by Jeff Mahoney <jeffm@suse.com> enclosure_status is expected to be a NULL terminated array of strings but isn't actually NULL terminated. When writing an invalid value to /sys/class/enclosure/.../.../status, it goes off the end of the array and Oopses. Fix by making the assumption true and adding NULL at the end. Reported-by: Artur Wojcik <artur.wojcik@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-11-26 09:50:20 -06:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
misc: enclosure: Fix space before '[' error Fix checkpatch.pl error: ERROR: space prohibited before open square bracket '['. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-29 18:38:31 +05:30
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
ses: Add power_status to SES device slot Add power_status to SES device slot, so we can power on/off the HDDs behind the enclosure. Check firmware status in ses_set_* before sending control pages to firmware. Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:18 -08:00
scsi: ses: don't get power status of SES device slot on probe The commit 08024885a2a3 ("ses: Add power_status to SES device slot") introduced the 'power_status' attribute to enclosure components and the associated callbacks. There are 2 callbacks available to get the power status of a device: 1) ses_get_power_status() for 'struct enclosure_component_callbacks' 2) get_component_power_status() for the sysfs device attribute (these are available for kernel-space and user-space, respectively.) However, despite both methods being available to get power status on demand, that commit also introduced a call to get power status in ses_enclosure_data_process(). This dramatically increased the total probe time for SCSI devices on larger configurations, because ses_enclosure_data_process() is called several times during the SCSI devices probe and loops over the component devices (but that is another problem, another patch). That results in a tremendous continuous hammering of SCSI Receive Diagnostics commands to the enclosure-services device, which does delay the total probe time for the SCSI devices __significantly__: Originally, ~34 minutes on a system attached to ~170 disks: [ 9214.490703] mpt3sas version 13.100.00.00 loaded ... [11256.580231] scsi 17:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) With this patch, it decreased to ~2.5 minutes -- a 13.6x faster [ 1002.992533] mpt3sas version 13.100.00.00 loaded ... [ 1151.978831] scsi 11:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) Back to the commit discussion.. on the ses_get_power_status() call introduced in ses_enclosure_data_process(): impact of removing it. That may possibly be in place to initialize the power status value on device probe. However, those 2 functions available to retrieve that value _do_ automatically refresh/update it. So the potential benefit would be a direct access of the 'power_status' field which does not use the callbacks... But the only reader of 'struct enclosure_component::power_status' is the get_component_power_status() callback for sysfs attribute, and it _does_ check for and call the .get_power_status callback, (which indeed is defined and implemented by that commit), so the power status value is, again, automatically updated. So, the remaining potential for a direct/non-callback access to the power_status attribute would be out-of-tree modules -- well, for those, if they are for whatever reason interested in values that are set during device probe and not up-to-date by the time they need it.. well, that would be curious. Well, to handle that more properly, set the initial power state value to '-1' (i.e., uninitialized) instead of '1' (power 'on'), and check for it in that callback which may do an direct access to the field value _if_ a callback function is not defined. Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Fixes: 08024885a2a3 ("ses: Add power_status to SES device slot") Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Song Liu <songliubraving@fb.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-05 12:18:19 -03:00
ses: Add power_status to SES device slot Add power_status to SES device slot, so we can power on/off the HDDs behind the enclosure. Check firmware status in ses_set_* before sending control pages to firmware. Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:18 -08:00
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-22 00:13:36 +01:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
ses: add reliable slot attribute The name provided by firmware is in a vendor specific format, publish the slot number to have a reliable mechanism for identifying slots across firmware implementations. If the enclosure does not provide a slot number fallback to the component number which is guaranteed unique, and usually mirrors the slot number. Cleaned up the unused ses_component.desc in the process. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:17 -08:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
ses: Add power_status to SES device slot Add power_status to SES device slot, so we can power on/off the HDDs behind the enclosure. Check firmware status in ses_set_* before sending control pages to firmware. Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:18 -08:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
ses: add reliable slot attribute The name provided by firmware is in a vendor specific format, publish the slot number to have a reliable mechanism for identifying slots across firmware implementations. If the enclosure does not provide a slot number fallback to the component number which is guaranteed unique, and usually mirrors the slot number. Cleaned up the unused ses_component.desc in the process. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:17 -08:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
ses: Add power_status to SES device slot Add power_status to SES device slot, so we can power on/off the HDDs behind the enclosure. Check firmware status in ses_set_* before sending control pages to firmware. Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:18 -08:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
ses: add reliable slot attribute The name provided by firmware is in a vendor specific format, publish the slot number to have a reliable mechanism for identifying slots across firmware implementations. If the enclosure does not provide a slot number fallback to the component number which is guaranteed unique, and usually mirrors the slot number. Cleaned up the unused ses_component.desc in the process. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 14:46:17 -08:00
[SCSI] ses: fix up functionality after class_device->device conversion ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-15 13:01:40 -05:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
enclosure: convert class code to use dev_groups The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the enclosure class code to use the correct field. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:05:16 -07:00
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00
misc: enclosure: Remove unnecessary error check It is not necessary to check return value of class_register. enclosure_init returns both successful and error value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-29 18:38:32 +05:30
[SCSI] enclosure: add support for enclosure services The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 15:40:56 -06:00