kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-26 18:16:26 +00:00
Code Issues Releases Packages Activity
linux/lib/test_rhashtable.c

686 lines
16 KiB
Raw Permalink Normal View History

rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable: Allow other tasks to be scheduled in large lookup loops Depending on system speed, the large lookup/insert/delete loops of the testsuite can take a considerable amount of time to complete causing watchdog warnings to appear. Allow other tasks to be scheduled throughout the loops. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-17 10:52:48 +02:00
test_rhashtable: add test case for rhl_table interface also test rhltable. rhltable remove operations are slow as deletions require a list walk, thus test with 1/16th of the given entry count number to get a run duration similar to rhashtable one. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:14 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable-test: calculate max_entries value by default A maximum table size of 64k entries is insufficient for the multiple threads test even in default configuration (10 threads * 50000 objects = 500000 objects in total). Since we know how many objects will be inserted, calculate the max size unless overridden by parameter. Note that specifying the exact number of objects upon table init won't suffice as that value is being rounded down to the next power of two - anticipate this by rounding up to the next power of two in beforehand. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:19 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable-test: Fix max_size parameter description Looks like a simple copy'n'paste error. Fixes: 1aa661f5c3df1 ("rhashtable-test: Measure time to insert, remove & traverse entries") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-04 12:37:17 +02:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable-test: allow to retry even if -ENOMEM was returned This is rather a hack to expose the current issue with rhashtable to under high pressure sometimes return -ENOMEM even though system memory is not exhausted and a consecutive insert may succeed. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:20 +01:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
test_rhashtable: add test case for rhl_table interface also test rhltable. rhltable remove operations are slow as deletions require a list walk, thus test with 1/16th of the given entry count number to get a run duration similar to rhashtable one. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:14 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
test_rhashtable: Use inlined rhashtable interface This patch converts test_rhashtable to the inlined rhashtable interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 21:57:04 +11:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
test_rhashtable: Use inlined rhashtable interface This patch converts test_rhashtable to the inlined rhashtable interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 21:57:04 +11:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
test_rhashtable: don't allocate huge static array Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:11 +02:00
rhashtable-test: retry insert operations After adding cond_resched() calls to threadfunc(), a surprisingly high rate of insert failures occurred probably due to table resizes getting a better chance to run in background. To not soften up the remaining tests, retry inserts until they either succeed or fail permanently. Also change the non-threaded test to retry insert operations, too. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:18 +01:00
rhashtable-test: allow to retry even if -ENOMEM was returned This is rather a hack to expose the current issue with rhashtable to under high pressure sometimes return -ENOMEM even though system memory is not exhausted and a consecutive insert may succeed. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:20 +01:00
rhashtable-test: retry insert operations After adding cond_resched() calls to threadfunc(), a surprisingly high rate of insert failures occurred probably due to table resizes getting a better chance to run in background. To not soften up the remaining tests, retry inserts until they either succeed or fail permanently. Also change the non-threaded test to retry insert operations, too. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:18 +01:00
test_rhashtable: don't allocate huge static array Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:11 +02:00
rhashtable-test: allow to retry even if -ENOMEM was returned This is rather a hack to expose the current issue with rhashtable to under high pressure sometimes return -ENOMEM even though system memory is not exhausted and a consecutive insert may succeed. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:20 +01:00
rhashtable-test: retry insert operations After adding cond_resched() calls to threadfunc(), a surprisingly high rate of insert failures occurred probably due to table resizes getting a better chance to run in background. To not soften up the remaining tests, retry inserts until they either succeed or fail permanently. Also change the non-threaded test to retry insert operations, too. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:18 +01:00
rhashtable-test: allow to retry even if -ENOMEM was returned This is rather a hack to expose the current issue with rhashtable to under high pressure sometimes return -ENOMEM even though system memory is not exhausted and a consecutive insert may succeed. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:20 +01:00
rhashtable-test: retry insert operations After adding cond_resched() calls to threadfunc(), a surprisingly high rate of insert failures occurred probably due to table resizes getting a better chance to run in background. To not soften up the remaining tests, retry inserts until they either succeed or fail permanently. Also change the non-threaded test to retry insert operations, too. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:18 +01:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
test_rhashtable: Use inlined rhashtable interface This patch converts test_rhashtable to the inlined rhashtable interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 21:57:04 +11:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable-test: Get rid of ptr in test_obj structure This only blows up the size of the test structure for no gain in test coverage. Reduces size of test_obj from 24 to 16 bytes. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:42 +00:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable: Allow other tasks to be scheduled in large lookup loops Depending on system speed, the large lookup/insert/delete loops of the testsuite can take a considerable amount of time to complete causing watchdog warnings to appear. Allow other tasks to be scheduled throughout the loops. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-17 10:52:48 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Use walker to test bucket statistics As resizes may continue to run in the background, use walker to ensure we see all entries. Also print the encountered number of rehashes queued up while traversing. This may lead to warnings due to entries being seen multiple times. We consider them non-fatal. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:44 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable: accept GFP flags in rhashtable_walk_init In certain cases, the 802.11 mesh pathtable code wants to iterate over all of the entries in the forwarding table from the receive path, which is inside an RCU read-side critical section. Enable walks inside atomic sections by allowing GFP_ATOMIC allocations for the walker state. Change all existing callsites to pass in GFP_KERNEL. Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Bob Copeland <me@bobcopeland.com> [also adjust gfs2/glock.c and rhashtable tests] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-02 10:09:19 -05:00
rhashtable-test: Use walker to test bucket statistics As resizes may continue to run in the background, use walker to ensure we see all entries. Also print the encountered number of rehashes queued up while traversing. This may lead to warnings due to entries being seen multiple times. We consider them non-fatal. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:44 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable: Change rhashtable_walk_start to return void Most callers of rhashtable_walk_start don't care about a resize event which is indicated by a return value of -EAGAIN. So calls to rhashtable_walk_start are wrapped wih code to ignore -EAGAIN. Something like this is common: ret = rhashtable_walk_start(rhiter); if (ret && ret != -EAGAIN) goto out; Since zero and -EAGAIN are the only possible return values from the function this check is pointless. The condition never evaluates to true. This patch changes rhashtable_walk_start to return void. This simplifies code for the callers that ignore -EAGAIN. For the few cases where the caller cares about the resize event, particularly where the table can be walked in mulitple parts for netlink or seq file dump, the function rhashtable_walk_start_check has been added that returns -EAGAIN on a resize event. Signed-off-by: Tom Herbert <tom@quantonium.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-04 10:31:41 -08:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Use walker to test bucket statistics As resizes may continue to run in the background, use walker to ensure we see all entries. Also print the encountered number of rehashes queued up while traversing. This may lead to warnings due to entries being seen multiple times. We consider them non-fatal. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:44 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Use walker to test bucket statistics As resizes may continue to run in the background, use walker to ensure we see all entries. Also print the encountered number of rehashes queued up while traversing. This may lead to warnings due to entries being seen multiple times. We consider them non-fatal. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:44 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Use walker to test bucket statistics As resizes may continue to run in the background, use walker to ensure we see all entries. Also print the encountered number of rehashes queued up while traversing. This may lead to warnings due to entries being seen multiple times. We consider them non-fatal. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:44 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: retry insert operations After adding cond_resched() calls to threadfunc(), a surprisingly high rate of insert failures occurred probably due to table resizes getting a better chance to run in background. To not soften up the remaining tests, retry inserts until they either succeed or fail permanently. Also change the non-threaded test to retry insert operations, too. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:18 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable-test: Do not allocate individual test objects By far the most expensive part of the selftest was the allocation of entries. Using a static array allows to measure the rhashtable operations. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:43 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
test_rhashtable: don't allocate huge static array Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:11 +02:00
rhashtable-test: retry insert operations After adding cond_resched() calls to threadfunc(), a surprisingly high rate of insert failures occurred probably due to table resizes getting a better chance to run in background. To not soften up the remaining tests, retry inserts until they either succeed or fail permanently. Also change the non-threaded test to retry insert operations, too. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:18 +01:00
rhashtable-test: Do not allocate individual test objects By far the most expensive part of the selftest was the allocation of entries. Using a static array allows to measure the rhashtable operations. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:43 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: retry insert operations After adding cond_resched() calls to threadfunc(), a surprisingly high rate of insert failures occurred probably due to table resizes getting a better chance to run in background. To not soften up the remaining tests, retry inserts until they either succeed or fail permanently. Also change the non-threaded test to retry insert operations, too. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:18 +01:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
lib: test_rhashtable: Fix KASAN warning I forgot one spot when introducing struct test_obj_val. Fixes: e859afe1ee0c5 ("lib: test_rhashtable: fix for large entry counts") Reported by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25 13:36:21 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Detect insertion failures Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:45 +00:00
rhashtable: Allow other tasks to be scheduled in large lookup loops Depending on system speed, the large lookup/insert/delete loops of the testsuite can take a considerable amount of time to complete causing watchdog warnings to appear. Allow other tasks to be scheduled throughout the loops. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-17 10:52:48 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable: don't allocate ht structure on stack in test_rht_init With object runtime debugging enabled, the rhashtable test suite will rightfully throw a warning "ODEBUG: object is on stack, but not annotated" from rhashtable_init(). This is because run_work is (correctly) being initialized via INIT_WORK(), and not annotated by INIT_WORK_ONSTACK(). Meaning, rhashtable_init() is okay as is, we just need to move ht e.g., into global scope. It never triggered anything, since test_rhashtable is rather a controlled environment and effectively runs to completion, so that stack memory is not vanishing underneath us, we shouldn't confuse any testers with it though. Fixes: 7e1e77636e36 ("lib: Resizable, Scalable, Concurrent Hash Table") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 21:14:21 +01:00
test_rhashtable: remove initdata annotation kbuild test robot reported a section mismatch warning w. gcc 4.x: WARNING: lib/test_rhashtable.o(.text+0x139e): Section mismatch in reference from the function rhltable_insert.clone.3() to the variable .init.data:rhlt so remove this annotation. Fixes: cdd4de372ea06 ("test_rhashtable: add test case for rhl_table interface") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21 17:36:08 +02:00
test_rhashtable: add test case for rhl_table interface also test rhltable. rhltable remove operations are slow as deletions require a list walk, thus test with 1/16th of the given entry count number to get a run duration similar to rhashtable one. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:14 +02:00
rhashtable: don't allocate ht structure on stack in test_rht_init With object runtime debugging enabled, the rhashtable test suite will rightfully throw a warning "ODEBUG: object is on stack, but not annotated" from rhashtable_init(). This is because run_work is (correctly) being initialized via INIT_WORK(), and not annotated by INIT_WORK_ONSTACK(). Meaning, rhashtable_init() is okay as is, we just need to move ht e.g., into global scope. It never triggered anything, since test_rhashtable is rather a controlled environment and effectively runs to completion, so that stack memory is not vanishing underneath us, we shouldn't confuse any testers with it though. Fixes: 7e1e77636e36 ("lib: Resizable, Scalable, Concurrent Hash Table") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 21:14:21 +01:00
test_rhashtable: add a check for max_size add a test that tries to insert more than max_size elements. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:13 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable-test: add cond_resched() to thread test This should fix for soft lockup bugs triggered on slow systems. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:17 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable-test: retry insert operations After adding cond_resched() calls to threadfunc(), a surprisingly high rate of insert failures occurred probably due to table resizes getting a better chance to run in background. To not soften up the remaining tests, retry inserts until they either succeed or fail permanently. Also change the non-threaded test to retry insert operations, too. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:18 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
test_rhashtable: don't allocate huge static array Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:11 +02:00
rhashtable-test: retry insert operations After adding cond_resched() calls to threadfunc(), a surprisingly high rate of insert failures occurred probably due to table resizes getting a better chance to run in background. To not soften up the remaining tests, retry inserts until they either succeed or fail permanently. Also change the non-threaded test to retry insert operations, too. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:18 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable-test: retry insert operations After adding cond_resched() calls to threadfunc(), a surprisingly high rate of insert failures occurred probably due to table resizes getting a better chance to run in background. To not soften up the remaining tests, retry inserts until they either succeed or fail permanently. Also change the non-threaded test to retry insert operations, too. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:18 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
lib: test_rhashtable: fix for large entry counts During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90ba5739 ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21 16:51:31 +02:00
rhashtable-test: add cond_resched() to thread test This should fix for soft lockup bugs triggered on slow systems. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:17 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable-test: calculate max_entries value by default A maximum table size of 64k entries is insufficient for the multiple threads test even in default configuration (10 threads * 50000 objects = 500000 objects in total). Since we know how many objects will be inserted, calculate the max size unless overridden by parameter. Note that specifying the exact number of objects upon table init won't suffice as that value is being rounded down to the next power of two - anticipate this by rounding up to the next power of two in beforehand. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:19 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
test_rhashtable: don't allocate huge static array Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:11 +02:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
test_rhashtable: don't allocate huge static array Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:11 +02:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
test_rhashtable: don't allocate huge static array Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:11 +02:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
test_rhashtable: add a check for max_size add a test that tries to insert more than max_size elements. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:13 +02:00
test_rhashtable: don't allocate huge static array Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:11 +02:00
test_rhashtable: add a check for max_size add a test that tries to insert more than max_size elements. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:13 +02:00
rhashtable-test: Fix 64bit division A 64bit division went in unnoticed. Use do_div() to accomodate non 64bit architectures. Reported-by: kbuild test robot Fixes: 1aa661f5c3df ("rhashtable-test: Measure time to insert, remove & traverse entries") Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05 02:27:02 +02:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
rhashtable-test: calculate max_entries value by default A maximum table size of 64k entries is insufficient for the multiple threads test even in default configuration (10 threads * 50000 objects = 500000 objects in total). Since we know how many objects will be inserted, calculate the max size unless overridden by parameter. Note that specifying the exact number of objects upon table init won't suffice as that value is being rounded down to the next power of two - anticipate this by rounding up to the next power of two in beforehand. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 18:17:19 +01:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
test_rhashtable: don't use global entries variable pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:12 +02:00
rhashtable-test: extend to test concurrency After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15 00:37:15 +02:00
test_rhashtable: add test case for rhl_table interface also test rhltable. rhltable remove operations are slow as deletions require a list walk, thus test with 1/16th of the given entry count number to get a run duration similar to rhashtable one. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 01:12:14 +02:00
rhashtable-test: Measure time to insert, remove & traverse entries Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:37:41 +00:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable: allow to unload test module There's no good reason why to disallow unloading of the rhashtable test case module. Commit 9d6dbe1bbaf8 moved the code from a boot test into a stand-alone module, but only converted the subsys_initcall() handler into a module_init() function without a related exit handler, and thus preventing the test module from unloading. Fixes: 9d6dbe1bbaf8 ("rhashtable: Make selftest modular") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 00:53:39 +01:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00
rhashtable: allow to unload test module There's no good reason why to disallow unloading of the rhashtable test case module. Commit 9d6dbe1bbaf8 moved the code from a boot test into a stand-alone module, but only converted the subsys_initcall() handler into a module_init() function without a related exit handler, and thus preventing the test module from unloading. Fixes: 9d6dbe1bbaf8 ("rhashtable: Make selftest modular") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 00:53:39 +01:00
rhashtable: Make selftest modular Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 15:40:25 +01:00