linux

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

fix file specification in comments Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>

2006-10-03 23:01:26 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

treewide: Remove old email address There were still a number of references to my old Red Hat email address in the kernel source. Remove these while keeping the Red Hat copyright notices intact. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>

2015-11-16 11:08:45 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

Remove Andrew Morton's old email accounts People can use the real name an an index into MAINTAINERS to find the current email address. Signed-off-by: Francois Cami <francois.cami@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-10-15 22:01:59 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: Map most files to use export.h instead of module.h The files changed within are only using the EXPORT_SYMBOL macro variants. They are not using core modular infrastructure and hence don't need module.h but only the export.h header. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

2011-10-16 02:01:52 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] io-accounting: write accounting Accounting writes is fairly simple: whenever a process flips a page from clean to dirty, we accuse it of having caused a write to underlying storage of PAGE_CACHE_SIZE bytes. This may overestimate the amount of writing: the page-dirtying may cause only one buffer_head's worth of writeout. Fixing that is possible, but probably a bit messy and isn't obviously important. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-10 02:19:27 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-09-25 23:30:57 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

fs: move code out of buffer.c Move invalidate_bdev, block_sync_page into fs/block_dev.c. Export kill_bdev as well, so brd doesn't have to open code it. Reduce buffer_head.h requirement accordingly. Removed a rather large comment from invalidate_bdev, as it looked a bit obsolete to bother moving. The small comment replacing it says enough. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

2011-09-16 02:31:11 -04:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

sched/rt: Move rt specific bits into new header file Move rt scheduler definitions out of include/linux/sched.h into new file include/linux/sched/rt.h Signed-off-by: Clark Williams <williams@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>

2013-02-07 09:47:07 -06:00

sched/headers: Prepare for the reduction of <linux/sched.h>'s signal API dependency Instead of including the full <linux/signal.h>, we are going to include the types-only <linux/signal_types.h> header in <linux/sched.h>, to further decouple the scheduler header from the signal headers. This means that various files which relied on the full <linux/signal.h> need to be updated to gain an explicit dependency on it. Update the code that relies on sched.h's inclusion of the <linux/signal.h> header. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>

2017-02-03 23:47:37 +01:00

mm: vmscan: fix do_try_to_free_pages() livelock This patch is based on KOSAKI's work and I add a little more description, please refer https://lkml.org/lkml/2012/6/14/74. Currently, I found system can enter a state that there are lots of free pages in a zone but only order-0 and order-1 pages which means the zone is heavily fragmented, then high order allocation could make direct reclaim path's long stall(ex, 60 seconds) especially in no swap and no compaciton enviroment. This problem happened on v3.4, but it seems issue still lives in current tree, the reason is do_try_to_free_pages enter live lock: kswapd will go to sleep if the zones have been fully scanned and are still not balanced. As kswapd thinks there's little point trying all over again to avoid infinite loop. Instead it changes order from high-order to 0-order because kswapd think order-0 is the most important. Look at 73ce02e9 in detail. If watermarks are ok, kswapd will go back to sleep and may leave zone->all_unreclaimable =3D 0. It assume high-order users can still perform direct reclaim if they wish. Direct reclaim continue to reclaim for a high order which is not a COSTLY_ORDER without oom-killer until kswapd turn on zone->all_unreclaimble= . This is because to avoid too early oom-kill. So it means direct_reclaim depends on kswapd to break this loop. In worst case, direct-reclaim may continue to page reclaim forever when kswapd sleeps forever until someone like watchdog detect and finally kill the process. As described in: http://thread.gmane.org/gmane.linux.kernel.mm/103737 We can't turn on zone->all_unreclaimable from direct reclaim path because direct reclaim path don't take any lock and this way is racy. Thus this patch removes zone->all_unreclaimable field completely and recalculates zone reclaimable state every time. Note: we can't take the idea that direct-reclaim see zone->pages_scanned directly and kswapd continue to use zone->all_unreclaimable. Because, it is racy. commit 929bea7c71 (vmscan: all_unreclaimable() use zone->all_unreclaimable as a name) describes the detail. [akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()] Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Nick Piggin <npiggin@gmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Neil Zhang <zhangwm@marvell.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Lisa Du <cldu@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:36 -07:00

writeback: Add tracing to balance_dirty_pages Tracing high level background writeback events is good, but it doesn't give the entire picture. Add visibility into write throttling to catch IO dispatched by foreground throttling of processing dirtying lots of pages. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

2010-07-07 13:24:07 +10:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: vmscan: fix do_try_to_free_pages() livelock This patch is based on KOSAKI's work and I add a little more description, please refer https://lkml.org/lkml/2012/6/14/74. Currently, I found system can enter a state that there are lots of free pages in a zone but only order-0 and order-1 pages which means the zone is heavily fragmented, then high order allocation could make direct reclaim path's long stall(ex, 60 seconds) especially in no swap and no compaciton enviroment. This problem happened on v3.4, but it seems issue still lives in current tree, the reason is do_try_to_free_pages enter live lock: kswapd will go to sleep if the zones have been fully scanned and are still not balanced. As kswapd thinks there's little point trying all over again to avoid infinite loop. Instead it changes order from high-order to 0-order because kswapd think order-0 is the most important. Look at 73ce02e9 in detail. If watermarks are ok, kswapd will go back to sleep and may leave zone->all_unreclaimable =3D 0. It assume high-order users can still perform direct reclaim if they wish. Direct reclaim continue to reclaim for a high order which is not a COSTLY_ORDER without oom-killer until kswapd turn on zone->all_unreclaimble= . This is because to avoid too early oom-kill. So it means direct_reclaim depends on kswapd to break this loop. In worst case, direct-reclaim may continue to page reclaim forever when kswapd sleeps forever until someone like watchdog detect and finally kill the process. As described in: http://thread.gmane.org/gmane.linux.kernel.mm/103737 We can't turn on zone->all_unreclaimable from direct reclaim path because direct reclaim path don't take any lock and this way is racy. Thus this patch removes zone->all_unreclaimable field completely and recalculates zone reclaimable state every time. Note: we can't take the idea that direct-reclaim see zone->pages_scanned directly and kswapd continue to use zone->all_unreclaimable. Because, it is racy. commit 929bea7c71 (vmscan: all_unreclaimable() use zone->all_unreclaimable as a name) describes the detail. [akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()] Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Nick Piggin <npiggin@gmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Neil Zhang <zhangwm@marvell.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Lisa Du <cldu@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:36 -07:00

writeback: introduce max-pause and pass-good dirty limits The max-pause limit helps to keep the sleep time inside balance_dirty_pages() within MAX_PAUSE=200ms. The 200ms max sleep means per task rate limit of 8pages/200ms=160KB/s when dirty exceeded, which normally is enough to stop dirtiers from continue pushing the dirty pages high, unless there are a sufficient large number of slow dirtiers (eg. 500 tasks doing 160KB/s will still sum up to 80MB/s, exceeding the write bandwidth of a slow disk and hence accumulating more and more dirty pages). The pass-good limit helps to let go of the good bdi's in the presence of a blocked bdi (ie. NFS server not responding) or slow USB disk which for some reason build up a large number of initial dirty pages that refuse to go away anytime soon. For example, given two bdi's A and B and the initial state bdi_thresh_A = dirty_thresh / 2 bdi_thresh_B = dirty_thresh / 2 bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 Then A get blocked, after a dozen seconds bdi_thresh_A = 0 bdi_thresh_B = dirty_thresh bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 The (bdi_dirty_B < bdi_thresh_B) test is now useless and the dirty pages will be effectively throttled by condition (nr_dirty < dirty_thresh). This has two problems: (1) we lose the protections for light dirtiers (2) balance_dirty_pages() effectively becomes IO-less because the (bdi_nr_reclaimable > bdi_thresh) test won't be true. This is good for IO, but balance_dirty_pages() loses an important way to break out of the loop which leads to more spread out throttle delays. DIRTY_PASSGOOD_AREA can eliminate the above issues. The only problem is, DIRTY_PASSGOOD_AREA needs to be defined as 2 to fully cover the above example while this patch uses the more conservative value 8 so as not to surprise people with too many dirty pages than expected. The max-pause limit won't noticeably impact the speed dirty pages are knocked down when there is a sudden drop of global/bdi dirty thresholds. Because the heavy dirties will be throttled below 160KB/s which is slow enough. It does help to avoid long dirty throttle delays and especially will make light dirtiers more responsive. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-19 22:18:42 -06:00

writeback: avoid tiny dirty poll intervals The LKP tests see big 56% regression for the case fio_mmap_randwrite_64k. Shaohua manages to root cause it to be the much smaller dirty pause times and hence much more frequent invocations to the IO-less balance_dirty_pages(). Since fio_mmap_randwrite_64k effectively contains both reads and writes, the more frequent pauses triggered more idling in the cfq IO scheduler. The solution is to increase pause time all the way up to the max 200ms in this case, which is found to restore most performance. This will help reduce CPU overheads in other cases, too. Note that I don't expect many performance critical workloads to run this access pattern: the mmap read-on-write is rather inefficient and could be avoided by doing normal writes syscalls. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: Li Shaohua <shaohua.li@intel.com> Tested-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-12-06 13:17:17 -06:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: get rid to incorrect references to pdflush in comments Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2009-09-23 19:37:09 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: double the dirty thresholds Enlarge default dirty ratios from 5/10 to 10/20. This fixes [Bug #12809] iozone regression with 2.6.29-rc6. The iozone benchmarks are performed on a 1200M file, with 8GB ram. iozone -i 0 -i 1 -i 2 -i 3 -i 4 -r 4k -s 64k -s 512m -s 1200m -b tmp.xls iozone -B -r 4k -s 64k -s 512m -s 1200m -b tmp.xls The performance regression is triggered by commit 1cf6e7d83bf3(mm: task dirty accounting fix), which makes more correct/thorough dirty accounting. The default 5/10 dirty ratios were picked (a) with the old dirty logic and (b) largely at random and (c) designed to be aggressive. In particular, that (a) means that having fixed some of the dirty accounting, maybe the real bug is now that it was always too aggressive, just hidden by an accounting issue. The enlarged 10/20 dirty ratios are just about enough to fix the regression. [ We will have to look at how this affects the old fsync() latency issue, but that probably will need independent work. - Linus ] Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: "Lin, Ming M" <ming.m.lin@intel.com> Tested-by: "Lin, Ming M" <ming.m.lin@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-03-23 08:57:38 +08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

2009-01-06 14:39:31 -08:00

mm/page-writeback: highmem_is_dirtyable option Add vm.highmem_is_dirtyable toggle A 32 bit machine with HIGHMEM64 enabled running DCC has an MMAPed file of approximately 2Gb size which contains a hash format that is written randomly by the dbclean process. On 2.6.16 this process took a few minutes. With lowmem only accounting of dirty ratios, this takes about 12 hours of 100% disk IO, all random writes. Include a toggle in /proc/sys/vm/highmem_is_dirtyable which can be set to 1 to add the highmem back to the total available memory count. [akpm@linux-foundation.org: Fix the CONFIG_DETECT_SOFTLOCKUP=y build] Signed-off-by: Bron Gondwana <brong@fastmail.fm> Cc: Ethan Solomita <solo@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: WU Fengguang <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-02-04 22:29:20 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: double the dirty thresholds Enlarge default dirty ratios from 5/10 to 10/20. This fixes [Bug #12809] iozone regression with 2.6.29-rc6. The iozone benchmarks are performed on a 1200M file, with 8GB ram. iozone -i 0 -i 1 -i 2 -i 3 -i 4 -r 4k -s 64k -s 512m -s 1200m -b tmp.xls iozone -B -r 4k -s 64k -s 512m -s 1200m -b tmp.xls The performance regression is triggered by commit 1cf6e7d83bf3(mm: task dirty accounting fix), which makes more correct/thorough dirty accounting. The default 5/10 dirty ratios were picked (a) with the old dirty logic and (b) largely at random and (c) designed to be aggressive. In particular, that (a) means that having fixed some of the dirty accounting, maybe the real bug is now that it was always too aggressive, just hidden by an accounting issue. The enlarged 10/20 dirty ratios are just about enough to fix the regression. [ We will have to look at how this affects the old fsync() latency issue, but that probably will need independent work. - Linus ] Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: "Lin, Ming M" <ming.m.lin@intel.com> Tested-by: "Lin, Ming M" <ming.m.lin@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-03-23 08:57:38 +08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

2009-01-06 14:39:31 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: fix proc_dointvec_userhz_jiffies "breakage" Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9838 On i386, HZ=1000, jiffies_to_clock_t() converts time in a somewhat strange way from the user's point of view: # echo 500 >/proc/sys/vm/dirty_writeback_centisecs # cat /proc/sys/vm/dirty_writeback_centisecs 499 So, we have 5000 jiffies converted to only 499 clock ticks and reported back. TICK_NSEC = 999848 ACTHZ = 256039 Keeping in-kernel variable in units passed from userspace will fix issue of course, but this probably won't be right for every sysctl. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-03-31 15:23:18 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

page-writeback: fix the calculation of the oldest_jif in wb_kupdate() wb_kupdate() function has a bug on linux-2.6.30-rc5. This bug causes generic_sync_sb_inodes() to start to write inodes back much earlier than our expectations because it miscalculates oldest_jif in wb_kupdate(). This bug was introduced in 704503d836042d4a4c7685b7036e7de0418fbc0f ('mm: fix proc_dointvec_userhz_jiffies "breakage"'). Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-05-16 22:56:28 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: export dirty_writeback_interval Export 'dirty_writeback_interval' to make it visible to file-systems. We are going to push superblock management down to file-systems and get rid of the 'sync_supers' kernel thread completly. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

2012-03-21 22:33:00 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: fix proc_dointvec_userhz_jiffies "breakage" Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9838 On i386, HZ=1000, jiffies_to_clock_t() converts time in a somewhat strange way from the user's point of view: # echo 500 >/proc/sys/vm/dirty_writeback_centisecs # cat /proc/sys/vm/dirty_writeback_centisecs 499 So, we have 5000 jiffies converted to only 499 clock ticks and reported back. TICK_NSEC = 999848 ACTHZ = 256039 Keeping in-kernel variable in units passed from userspace will fix issue of course, but this probably won't be right for every sysctl. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-03-31 15:23:18 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

page-writeback: fix the calculation of the oldest_jif in wb_kupdate() wb_kupdate() function has a bug on linux-2.6.30-rc5. This bug causes generic_sync_sb_inodes() to start to write inodes back much earlier than our expectations because it miscalculates oldest_jif in wb_kupdate(). This bug was introduced in 704503d836042d4a4c7685b7036e7de0418fbc0f ('mm: fix proc_dointvec_userhz_jiffies "breakage"'). Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-05-16 22:56:28 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] Represent laptop_mode as jiffies internally Make that the internal value for /proc/sys/vm/laptop_mode is stored as jiffies instead of seconds. Let the sysctl interface do the conversions, instead of doing on-the-fly conversions every time the value is used. Add a description of the fact that laptop_mode doubles as a flag and a timeout to the comment above the laptop_mode variable. Signed-off-by: Bart Samwel <bart@samwel.tk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-03-24 03:15:49 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: add dirty_throttle_control->dom Currently all dirty throttle operations use global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch adds dirty_throttle_control->dom and updates functions which are directly using globabl_wb_domain to use it instead. As this makes global_update_bandwidth() a misnomer, the function is renamed to domain_update_bandwidth(). This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:28 -04:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

writeback: add dirty_throttle_control->dom Currently all dirty throttle operations use global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch adds dirty_throttle_control->dom and updates functions which are directly using globabl_wb_domain to use it instead. As this makes global_update_bandwidth() a misnomer, the function is renamed to domain_update_bandwidth(). This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:28 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: add dirty_throttle_control->wb_completions wb->completions measures the wb's proportional write bandwidth in global_wb_domain and thus naturally tied to the wb_domain. This patch adds dirty_throttle_control->wb_completions which is initialized to wb->completions by GDTC_INIT() and updates __wb_dirty_limits() to use it instead of dereferencing wb->completions directly. This will allow dirty_throttle_control to represent different wb_domains and the matching wb completions. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:27 -04:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: add dirty_throttle_control->wb_bg_thresh wb_bg_thresh is currently treated as a second-class citizen. It's only used when BDI_CAP_STRICTLIMIT is set and balance_dirty_pages() doesn't calculate it unless the cap is set. When the cap is set, the calculated value is not passed around but instead recalculated whenever it's used. wb_position_ratio() calculates it by scaling wb_thresh proportional to bg_thresh / thresh. wb_update_dirty_ratelimit() uses wb_dirty_limit() on bg_thresh, which should generally lead to a similar result as the proportional scaling but can also be way off in the presence of max/min_ratio settings. Avoiding wb_bg_thresh calculation saves us one u64 multiplication and divsion when BDI_CAP_STRICTLIMIT is not set. Given that balance_dirty_pages() is already ratelimited, this doesn't justify the incurred extra complexity. This patch adds wb_bg_thresh to dirty_throttle_control and makes wb_dirty_limits() always calculate it and updates the users to use the pre-calculated value. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:24 -04:00

writeback: add dirty_throttle_control->pos_ratio wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:26 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

writeback: make bdi->min/max_ratio handling cgroup writeback aware bdi->min/max_ratio are user-configurable per-bdi knobs which regulate dirty limit of each bdi. For cgroup writeback, they need to be further distributed across wb's (bdi_writeback's) belonging to the configured bdi. This patch introduces wb_min_max_ratio() which distributes bdi->min/max_ratio according to a wb's proportion in the total active bandwidth of its bdi. v2: Update wb_min_max_ratio() to fix a bug where both min and max were assigned the min value and avoid calculations when possible. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:49 -04:00

writeback: memcg dirty_throttle_control should be initialized with wb->memcg_completions MDTC_INIT() is used to initialize dirty_throttle_control for memcg domains. It used DTC_INIT_COMMON() to initialized mdtc->wb and ->wb_completions which is incorrect as DTC_INIT_COMMON() sets the latter to wb->completions instead of wb->memcg_completions. This can lead to wildly incorrect results when calculating the proportion of dirty memory the memcg domain should get. Remove DTC_INIT_COMMON() and update MDTC_INIT() to initialize mdtc->wb_completions to wb->memcg_completions. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c2aa723a6093 ("writeback: implement memcg writeback domain based throttling") Signed-off-by: Jens Axboe <axboe@fb.com>

2015-09-29 12:47:53 -04:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

writeback: memcg dirty_throttle_control should be initialized with wb->memcg_completions MDTC_INIT() is used to initialize dirty_throttle_control for memcg domains. It used DTC_INIT_COMMON() to initialized mdtc->wb and ->wb_completions which is incorrect as DTC_INIT_COMMON() sets the latter to wb->completions instead of wb->memcg_completions. This can lead to wildly incorrect results when calculating the proportion of dirty memory the memcg domain should get. Remove DTC_INIT_COMMON() and update MDTC_INIT() to initialize mdtc->wb_completions to wb->memcg_completions. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c2aa723a6093 ("writeback: implement memcg writeback domain based throttling") Signed-off-by: Jens Axboe <axboe@fb.com>

2015-09-29 12:47:53 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: add dirty_throttle_control->dom Currently all dirty throttle operations use global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch adds dirty_throttle_control->dom and updates functions which are directly using globabl_wb_domain to use it instead. As this makes global_update_bandwidth() a misnomer, the function is renamed to domain_update_bandwidth(). This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:28 -04:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

writeback: implement memcg wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. The previous patches laid the groundwork to support the two wb_domains and this patch implements memcg wb_domain. memcg->cgwb_domain is initialized on css online and destroyed on css release, wb->memcg_completions is added, and __wb_writeout_inc() is updated to increment completions against both global and memcg wb_domains. The following patches will update balance_dirty_pages() and its subroutines to actually consider memcg wb_domain for throttling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:33 -04:00

writeback: make bdi->min/max_ratio handling cgroup writeback aware bdi->min/max_ratio are user-configurable per-bdi knobs which regulate dirty limit of each bdi. For cgroup writeback, they need to be further distributed across wb's (bdi_writeback's) belonging to the configured bdi. This patch introduces wb_min_max_ratio() which distributes bdi->min/max_ratio according to a wb's proportion in the total active bandwidth of its bdi. v2: Update wb_min_max_ratio() to fix a bug where both min and max were assigned the min value and avoid calculations when possible. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:49 -04:00

writeback: memcg dirty_throttle_control should be initialized with wb->memcg_completions MDTC_INIT() is used to initialize dirty_throttle_control for memcg domains. It used DTC_INIT_COMMON() to initialized mdtc->wb and ->wb_completions which is incorrect as DTC_INIT_COMMON() sets the latter to wb->completions instead of wb->memcg_completions. This can lead to wildly incorrect results when calculating the proportion of dirty memory the memcg domain should get. Remove DTC_INIT_COMMON() and update MDTC_INIT() to initialize mdtc->wb_completions to wb->memcg_completions. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c2aa723a6093 ("writeback: implement memcg writeback domain based throttling") Signed-off-by: Jens Axboe <axboe@fb.com>

2015-09-29 12:47:53 -04:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: add dirty_throttle_control->dom Currently all dirty throttle operations use global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch adds dirty_throttle_control->dom and updates functions which are directly using globabl_wb_domain to use it instead. As this makes global_update_bandwidth() a misnomer, the function is renamed to domain_update_bandwidth(). This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:28 -04:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

writeback: implement memcg wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. The previous patches laid the groundwork to support the two wb_domains and this patch implements memcg wb_domain. memcg->cgwb_domain is initialized on css online and destroyed on css release, wb->memcg_completions is added, and __wb_writeout_inc() is updated to increment completions against both global and memcg wb_domains. The following patches will update balance_dirty_pages() and its subroutines to actually consider memcg wb_domain for throttling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:33 -04:00

writeback: make bdi->min/max_ratio handling cgroup writeback aware bdi->min/max_ratio are user-configurable per-bdi knobs which regulate dirty limit of each bdi. For cgroup writeback, they need to be further distributed across wb's (bdi_writeback's) belonging to the configured bdi. This patch introduces wb_min_max_ratio() which distributes bdi->min/max_ratio according to a wb's proportion in the total active bandwidth of its bdi. v2: Update wb_min_max_ratio() to fix a bug where both min and max were assigned the min value and avoid calculations when possible. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:49 -04:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

mm/page-writeback.c: fix dirty_balance_reserve subtraction from dirtyable memory Tejun reported stuttering and latency spikes on a system where random tasks would enter direct reclaim and get stuck on dirty pages. Around 50% of memory was occupied by tmpfs backed by an SSD, and another disk (rotating) was reading and writing at max speed to shrink a partition. : The problem was pretty ridiculous. It's a 8gig machine w/ one ssd and 10k : rpm harddrive and I could reliably reproduce constant stuttering every : several seconds for as long as buffered IO was going on on the hard drive : either with tmpfs occupying somewhere above 4gig or a test program which : allocates about the same amount of anon memory. Although swap usage was : zero, turning off swap also made the problem go away too. : : The trigger conditions seem quite plausible - high anon memory usage w/ : heavy buffered IO and swap configured - and it's highly likely that this : is happening in the wild too. (this can happen with copying large files : to usb sticks too, right?) This patch (of 2): The dirty_balance_reserve is an approximation of the fraction of free pages that the page allocator does not make available for page cache allocations. As a result, it has to be taken into account when calculating the amount of "dirtyable memory", the baseline to which dirty_background_ratio and dirty_ratio are applied. However, currently the reserve is subtracted from the sum of free and reclaimable pages, which is non-sensical and leads to erroneous results when the system is dominated by unreclaimable pages and the dirty_balance_reserve is bigger than free+reclaimable. In that case, at least the already allocated cache should be considered dirtyable. Fix the calculation by subtracting the reserve from the amount of free pages, then adding the reclaimable pages on top. [akpm@linux-foundation.org: fix CONFIG_HIGHMEM build] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tejun Heo <tj@kernel.org> Tested-by: Tejun Heo <tj@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-01-29 14:05:39 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm/page-writeback.c: fix dirty_balance_reserve subtraction from dirtyable memory Tejun reported stuttering and latency spikes on a system where random tasks would enter direct reclaim and get stuck on dirty pages. Around 50% of memory was occupied by tmpfs backed by an SSD, and another disk (rotating) was reading and writing at max speed to shrink a partition. : The problem was pretty ridiculous. It's a 8gig machine w/ one ssd and 10k : rpm harddrive and I could reliably reproduce constant stuttering every : several seconds for as long as buffered IO was going on on the hard drive : either with tmpfs occupying somewhere above 4gig or a test program which : allocates about the same amount of anon memory. Although swap usage was : zero, turning off swap also made the problem go away too. : : The trigger conditions seem quite plausible - high anon memory usage w/ : heavy buffered IO and swap configured - and it's highly likely that this : is happening in the wild too. (this can happen with copying large files : to usb sticks too, right?) This patch (of 2): The dirty_balance_reserve is an approximation of the fraction of free pages that the page allocator does not make available for page cache allocations. As a result, it has to be taken into account when calculating the amount of "dirtyable memory", the baseline to which dirty_background_ratio and dirty_ratio are applied. However, currently the reserve is subtracted from the sum of free and reclaimable pages, which is non-sensical and leads to erroneous results when the system is dominated by unreclaimable pages and the dirty_balance_reserve is bigger than free+reclaimable. In that case, at least the already allocated cache should be considered dirtyable. Fix the calculation by subtracting the reserve from the amount of free pages, then adding the reclaimable pages on top. [akpm@linux-foundation.org: fix CONFIG_HIGHMEM build] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tejun Heo <tj@kernel.org> Tested-by: Tejun Heo <tj@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-01-29 14:05:39 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm/page-writeback.c: fix dirty_balance_reserve subtraction from dirtyable memory Tejun reported stuttering and latency spikes on a system where random tasks would enter direct reclaim and get stuck on dirty pages. Around 50% of memory was occupied by tmpfs backed by an SSD, and another disk (rotating) was reading and writing at max speed to shrink a partition. : The problem was pretty ridiculous. It's a 8gig machine w/ one ssd and 10k : rpm harddrive and I could reliably reproduce constant stuttering every : several seconds for as long as buffered IO was going on on the hard drive : either with tmpfs occupying somewhere above 4gig or a test program which : allocates about the same amount of anon memory. Although swap usage was : zero, turning off swap also made the problem go away too. : : The trigger conditions seem quite plausible - high anon memory usage w/ : heavy buffered IO and swap configured - and it's highly likely that this : is happening in the wild too. (this can happen with copying large files : to usb sticks too, right?) This patch (of 2): The dirty_balance_reserve is an approximation of the fraction of free pages that the page allocator does not make available for page cache allocations. As a result, it has to be taken into account when calculating the amount of "dirtyable memory", the baseline to which dirty_background_ratio and dirty_ratio are applied. However, currently the reserve is subtracted from the sum of free and reclaimable pages, which is non-sensical and leads to erroneous results when the system is dominated by unreclaimable pages and the dirty_balance_reserve is bigger than free+reclaimable. In that case, at least the already allocated cache should be considered dirtyable. Fix the calculation by subtracting the reserve from the amount of free pages, then adding the reclaimable pages on top. [akpm@linux-foundation.org: fix CONFIG_HIGHMEM build] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tejun Heo <tj@kernel.org> Tested-by: Tejun Heo <tj@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-01-29 14:05:39 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm/page-writeback.c: fix dirty_balance_reserve subtraction from dirtyable memory Tejun reported stuttering and latency spikes on a system where random tasks would enter direct reclaim and get stuck on dirty pages. Around 50% of memory was occupied by tmpfs backed by an SSD, and another disk (rotating) was reading and writing at max speed to shrink a partition. : The problem was pretty ridiculous. It's a 8gig machine w/ one ssd and 10k : rpm harddrive and I could reliably reproduce constant stuttering every : several seconds for as long as buffered IO was going on on the hard drive : either with tmpfs occupying somewhere above 4gig or a test program which : allocates about the same amount of anon memory. Although swap usage was : zero, turning off swap also made the problem go away too. : : The trigger conditions seem quite plausible - high anon memory usage w/ : heavy buffered IO and swap configured - and it's highly likely that this : is happening in the wild too. (this can happen with copying large files : to usb sticks too, right?) This patch (of 2): The dirty_balance_reserve is an approximation of the fraction of free pages that the page allocator does not make available for page cache allocations. As a result, it has to be taken into account when calculating the amount of "dirtyable memory", the baseline to which dirty_background_ratio and dirty_ratio are applied. However, currently the reserve is subtracted from the sum of free and reclaimable pages, which is non-sensical and leads to erroneous results when the system is dominated by unreclaimable pages and the dirty_balance_reserve is bigger than free+reclaimable. In that case, at least the already allocated cache should be considered dirtyable. Fix the calculation by subtracting the reserve from the amount of free pages, then adding the reclaimable pages on top. [akpm@linux-foundation.org: fix CONFIG_HIGHMEM build] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tejun Heo <tj@kernel.org> Tested-by: Tejun Heo <tj@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-01-29 14:05:39 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm/page-writeback.c: fix dirty_balance_reserve subtraction from dirtyable memory Tejun reported stuttering and latency spikes on a system where random tasks would enter direct reclaim and get stuck on dirty pages. Around 50% of memory was occupied by tmpfs backed by an SSD, and another disk (rotating) was reading and writing at max speed to shrink a partition. : The problem was pretty ridiculous. It's a 8gig machine w/ one ssd and 10k : rpm harddrive and I could reliably reproduce constant stuttering every : several seconds for as long as buffered IO was going on on the hard drive : either with tmpfs occupying somewhere above 4gig or a test program which : allocates about the same amount of anon memory. Although swap usage was : zero, turning off swap also made the problem go away too. : : The trigger conditions seem quite plausible - high anon memory usage w/ : heavy buffered IO and swap configured - and it's highly likely that this : is happening in the wild too. (this can happen with copying large files : to usb sticks too, right?) This patch (of 2): The dirty_balance_reserve is an approximation of the fraction of free pages that the page allocator does not make available for page cache allocations. As a result, it has to be taken into account when calculating the amount of "dirtyable memory", the baseline to which dirty_background_ratio and dirty_ratio are applied. However, currently the reserve is subtracted from the sum of free and reclaimable pages, which is non-sensical and leads to erroneous results when the system is dominated by unreclaimable pages and the dirty_balance_reserve is bigger than free+reclaimable. In that case, at least the already allocated cache should be considered dirtyable. Fix the calculation by subtracting the reserve from the amount of free pages, then adding the reclaimable pages on top. [akpm@linux-foundation.org: fix CONFIG_HIGHMEM build] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tejun Heo <tj@kernel.org> Tested-by: Tejun Heo <tj@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-01-29 14:05:39 -08:00

mm: page_alloc: generalize the dirty balance reserve The dirty balance reserve that dirty throttling has to consider is merely memory not available to userspace allocations. There is nothing writeback-specific about it. Generalize the name so that it's reusable outside of that context. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-01-14 15:20:15 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm/page-writeback.c: fix dirty_balance_reserve subtraction from dirtyable memory Tejun reported stuttering and latency spikes on a system where random tasks would enter direct reclaim and get stuck on dirty pages. Around 50% of memory was occupied by tmpfs backed by an SSD, and another disk (rotating) was reading and writing at max speed to shrink a partition. : The problem was pretty ridiculous. It's a 8gig machine w/ one ssd and 10k : rpm harddrive and I could reliably reproduce constant stuttering every : several seconds for as long as buffered IO was going on on the hard drive : either with tmpfs occupying somewhere above 4gig or a test program which : allocates about the same amount of anon memory. Although swap usage was : zero, turning off swap also made the problem go away too. : : The trigger conditions seem quite plausible - high anon memory usage w/ : heavy buffered IO and swap configured - and it's highly likely that this : is happening in the wild too. (this can happen with copying large files : to usb sticks too, right?) This patch (of 2): The dirty_balance_reserve is an approximation of the fraction of free pages that the page allocator does not make available for page cache allocations. As a result, it has to be taken into account when calculating the amount of "dirtyable memory", the baseline to which dirty_background_ratio and dirty_ratio are applied. However, currently the reserve is subtracted from the sum of free and reclaimable pages, which is non-sensical and leads to erroneous results when the system is dominated by unreclaimable pages and the dirty_balance_reserve is bigger than free+reclaimable. In that case, at least the already allocated cache should be considered dirtyable. Fix the calculation by subtracting the reserve from the amount of free pages, then adding the reclaimable pages on top. [akpm@linux-foundation.org: fix CONFIG_HIGHMEM build] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tejun Heo <tj@kernel.org> Tested-by: Tejun Heo <tj@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-01-29 14:05:39 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm/page-writeback.c: fix dirty_balance_reserve subtraction from dirtyable memory Tejun reported stuttering and latency spikes on a system where random tasks would enter direct reclaim and get stuck on dirty pages. Around 50% of memory was occupied by tmpfs backed by an SSD, and another disk (rotating) was reading and writing at max speed to shrink a partition. : The problem was pretty ridiculous. It's a 8gig machine w/ one ssd and 10k : rpm harddrive and I could reliably reproduce constant stuttering every : several seconds for as long as buffered IO was going on on the hard drive : either with tmpfs occupying somewhere above 4gig or a test program which : allocates about the same amount of anon memory. Although swap usage was : zero, turning off swap also made the problem go away too. : : The trigger conditions seem quite plausible - high anon memory usage w/ : heavy buffered IO and swap configured - and it's highly likely that this : is happening in the wild too. (this can happen with copying large files : to usb sticks too, right?) This patch (of 2): The dirty_balance_reserve is an approximation of the fraction of free pages that the page allocator does not make available for page cache allocations. As a result, it has to be taken into account when calculating the amount of "dirtyable memory", the baseline to which dirty_background_ratio and dirty_ratio are applied. However, currently the reserve is subtracted from the sum of free and reclaimable pages, which is non-sensical and leads to erroneous results when the system is dominated by unreclaimable pages and the dirty_balance_reserve is bigger than free+reclaimable. In that case, at least the already allocated cache should be considered dirtyable. Fix the calculation by subtracting the reserve from the amount of free pages, then adding the reclaimable pages on top. [akpm@linux-foundation.org: fix CONFIG_HIGHMEM build] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tejun Heo <tj@kernel.org> Tested-by: Tejun Heo <tj@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-01-29 14:05:39 -08:00

mm/page-writeback.c: make determine_dirtyable_memory static again The tracing ring-buffer used this function briefly, but not anymore. Make it local to the writeback code again. Also, move the function so that no forward declaration needs to be reintroduced. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:06:57 -08:00

mm, vmscan: remove highmem_file_pages With the reintroduction of per-zone LRU stats, highmem_file_pages is redundant so remove it. [mgorman@techsingularity.net: wrong stat is being accumulated in highmem_dirtyable_memory] Link: http://lkml.kernel.org/r/20160725092324.GM10438@techsingularity.netLink: http://lkml.kernel.org/r/1469110261-7365-3-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:47:29 -07:00

mm/writeback: correct dirty page calculation for highmem ZONE_MOVABLE could be treated as highmem so we need to consider it for accurate calculation of dirty pages. And, in following patches, ZONE_CMA will be introduced and it can be treated as highmem, too. So, instead of manually adding stat of ZONE_MOVABLE, looping all zones and check whether the zone is highmem or not and add stat of the zone which can be treated as highmem. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-05-19 17:12:20 -07:00

mm/page-writeback.c: make determine_dirtyable_memory static again The tracing ring-buffer used this function briefly, but not anymore. Make it local to the writeback code again. Also, move the function so that no forward declaration needs to be reintroduced. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:06:57 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm, page_alloc: fix dirtyable highmem calculation When I tested vmscale in mmtest in 32bit, I found the benchmark was slow down 0.5 times. base node 1 global-1 User 12.98 16.04 System 147.61 166.42 Elapsed 26.48 38.08 With vmstat, I found IO wait avg is much increased compared to base. The reason was highmem_dirtyable_memory accumulates free pages and highmem_file_pages from HIGHMEM to MOVABLE zones which was wrong. With that, dirth_thresh in throtlle_vm_write is always 0 so that it calls congestion_wait frequently if writeback starts. With this patch, it is much recovered. base node fi 1 global-1 fix User 12.98 16.04 13.78 System 147.61 166.42 143.92 Elapsed 26.48 38.08 29.64 Link: http://lkml.kernel.org/r/1468404004-5085-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:47:08 -07:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm, page_alloc: fix dirtyable highmem calculation When I tested vmscale in mmtest in 32bit, I found the benchmark was slow down 0.5 times. base node 1 global-1 User 12.98 16.04 System 147.61 166.42 Elapsed 26.48 38.08 With vmstat, I found IO wait avg is much increased compared to base. The reason was highmem_dirtyable_memory accumulates free pages and highmem_file_pages from HIGHMEM to MOVABLE zones which was wrong. With that, dirth_thresh in throtlle_vm_write is always 0 so that it calls congestion_wait frequently if writeback starts. With this patch, it is much recovered. base node fi 1 global-1 fix User 12.98 16.04 13.78 System 147.61 166.42 143.92 Elapsed 26.48 38.08 29.64 Link: http://lkml.kernel.org/r/1468404004-5085-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:47:08 -07:00

mm/page-writeback.c: make determine_dirtyable_memory static again The tracing ring-buffer used this function briefly, but not anymore. Make it local to the writeback code again. Also, move the function so that no forward declaration needs to be reintroduced. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:06:57 -08:00

mm, page_alloc: fix dirtyable highmem calculation When I tested vmscale in mmtest in 32bit, I found the benchmark was slow down 0.5 times. base node 1 global-1 User 12.98 16.04 System 147.61 166.42 Elapsed 26.48 38.08 With vmstat, I found IO wait avg is much increased compared to base. The reason was highmem_dirtyable_memory accumulates free pages and highmem_file_pages from HIGHMEM to MOVABLE zones which was wrong. With that, dirth_thresh in throtlle_vm_write is always 0 so that it calls congestion_wait frequently if writeback starts. With this patch, it is much recovered. base node fi 1 global-1 fix User 12.98 16.04 13.78 System 147.61 166.42 143.92 Elapsed 26.48 38.08 29.64 Link: http://lkml.kernel.org/r/1468404004-5085-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:47:08 -07:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm, page_alloc: fix dirtyable highmem calculation When I tested vmscale in mmtest in 32bit, I found the benchmark was slow down 0.5 times. base node 1 global-1 User 12.98 16.04 System 147.61 166.42 Elapsed 26.48 38.08 With vmstat, I found IO wait avg is much increased compared to base. The reason was highmem_dirtyable_memory accumulates free pages and highmem_file_pages from HIGHMEM to MOVABLE zones which was wrong. With that, dirth_thresh in throtlle_vm_write is always 0 so that it calls congestion_wait frequently if writeback starts. With this patch, it is much recovered. base node fi 1 global-1 fix User 12.98 16.04 13.78 System 147.61 166.42 143.92 Elapsed 26.48 38.08 29.64 Link: http://lkml.kernel.org/r/1468404004-5085-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:47:08 -07:00

mm, vmscan: remove highmem_file_pages With the reintroduction of per-zone LRU stats, highmem_file_pages is redundant so remove it. [mgorman@techsingularity.net: wrong stat is being accumulated in highmem_dirtyable_memory] Link: http://lkml.kernel.org/r/20160725092324.GM10438@techsingularity.netLink: http://lkml.kernel.org/r/1469110261-7365-3-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:47:29 -07:00

mm/writeback: correct dirty page calculation for highmem ZONE_MOVABLE could be treated as highmem so we need to consider it for accurate calculation of dirty pages. And, in following patches, ZONE_CMA will be introduced and it can be treated as highmem, too. So, instead of manually adding stat of ZONE_MOVABLE, looping all zones and check whether the zone is highmem or not and add stat of the zone which can be treated as highmem. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-05-19 17:12:20 -07:00

mm/page-writeback.c: make determine_dirtyable_memory static again The tracing ring-buffer used this function briefly, but not anymore. Make it local to the writeback code again. Also, move the function so that no forward declaration needs to be reintroduced. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:06:57 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm: fix calculation of dirtyable memory The system uses global_dirtyable_memory() to calculate number of dirtyable pages/pages that can be allocated to the page cache. A bug causes an underflow thus making the page count look like a big unsigned number. This in turn confuses the dirty writeback throttling to aggressively write back pages as they become dirty (usually 1 page at a time). This generally only affects systems with highmem because the underflowed count gets subtracted from the global count of dirtyable memory. The problem was introduced with v3.2-4896-gab8fabd Fix is to ensure we don't get an underflowed total of either highmem or global dirtyable memory. Signed-off-by: Sonny Rao <sonnyrao@chromium.org> Signed-off-by: Puneet Kumar <puneetster@chromium.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Damien Wyart <damien.wyart@free.fr> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-12-20 15:05:07 -08:00

mm/page-writeback.c: make determine_dirtyable_memory static again The tracing ring-buffer used this function briefly, but not anymore. Make it local to the writeback code again. Also, move the function so that no forward declaration needs to be reintroduced. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:06:57 -08:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

mm/page-writeback.c: make determine_dirtyable_memory static again The tracing ring-buffer used this function briefly, but not anymore. Make it local to the writeback code again. Also, move the function so that no forward declaration needs to be reintroduced. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:06:57 -08:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

mm/page-writeback.c: make determine_dirtyable_memory static again The tracing ring-buffer used this function briefly, but not anymore. Make it local to the writeback code again. Also, move the function so that no forward declaration needs to be reintroduced. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:06:57 -08:00

mm: page-writeback.c: local functions should not be exposed globally The function global_dirtyable_memory is only referenced in this file and should be marked static to prevent it from being exposed globally. This quiets the sparse warning: warning: symbol 'global_dirtyable_memory' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-04-12 13:44:20 -07:00

mm/page-writeback.c: make determine_dirtyable_memory static again The tracing ring-buffer used this function briefly, but not anymore. Make it local to the writeback code again. Also, move the function so that no forward declaration needs to be reintroduced. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:06:57 -08:00

mm: rename global_page_state to global_zone_page_state global_page_state is error prone as a recent bug report pointed out [1]. It only returns proper values for zone based counters as the enum it gets suggests. We already have global_node_page_state so let's rename global_page_state to global_zone_page_state to be more explicit here. All existing users seems to be correct: $ git grep "global_page_state(NR_" | sed 's@.*($NR_[A-Z_]*$).*@\1@' | sort | uniq -c 2 NR_BOUNCE 2 NR_FREE_CMA_PAGES 11 NR_FREE_PAGES 1 NR_KERNEL_STACK_KB 1 NR_MLOCK 2 NR_PAGETABLE This patch shouldn't introduce any functional change. [1] http://lkml.kernel.org/r/201707260628.v6Q6SmaS030814@www262.sakura.ne.jp Link: http://lkml.kernel.org/r/20170801134256.5400-2-hannes@cmpxchg.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-09-06 16:23:36 -07:00

mm: page_alloc: generalize the dirty balance reserve The dirty balance reserve that dirty throttling has to consider is merely memory not available to userspace allocations. There is nothing writeback-specific about it. Generalize the name so that it's reusable outside of that context. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-01-14 15:20:15 -08:00

mm/page-writeback.c: make determine_dirtyable_memory static again The tracing ring-buffer used this function briefly, but not anymore. Make it local to the writeback code again. Also, move the function so that no forward declaration needs to be reintroduced. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:06:57 -08:00

mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:45:31 -07:00

mm/page-writeback.c: fix dirty_balance_reserve subtraction from dirtyable memory Tejun reported stuttering and latency spikes on a system where random tasks would enter direct reclaim and get stuck on dirty pages. Around 50% of memory was occupied by tmpfs backed by an SSD, and another disk (rotating) was reading and writing at max speed to shrink a partition. : The problem was pretty ridiculous. It's a 8gig machine w/ one ssd and 10k : rpm harddrive and I could reliably reproduce constant stuttering every : several seconds for as long as buffered IO was going on on the hard drive : either with tmpfs occupying somewhere above 4gig or a test program which : allocates about the same amount of anon memory. Although swap usage was : zero, turning off swap also made the problem go away too. : : The trigger conditions seem quite plausible - high anon memory usage w/ : heavy buffered IO and swap configured - and it's highly likely that this : is happening in the wild too. (this can happen with copying large files : to usb sticks too, right?) This patch (of 2): The dirty_balance_reserve is an approximation of the fraction of free pages that the page allocator does not make available for page cache allocations. As a result, it has to be taken into account when calculating the amount of "dirtyable memory", the baseline to which dirty_background_ratio and dirty_ratio are applied. However, currently the reserve is subtracted from the sum of free and reclaimable pages, which is non-sensical and leads to erroneous results when the system is dominated by unreclaimable pages and the dirty_balance_reserve is bigger than free+reclaimable. In that case, at least the already allocated cache should be considered dirtyable. Fix the calculation by subtracting the reserve from the amount of free pages, then adding the reclaimable pages on top. [akpm@linux-foundation.org: fix CONFIG_HIGHMEM build] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tejun Heo <tj@kernel.org> Tested-by: Tejun Heo <tj@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-01-29 14:05:39 -08:00

mm/page-writeback.c: make determine_dirtyable_memory static again The tracing ring-buffer used this function briefly, but not anymore. Make it local to the writeback code again. Also, move the function so that no forward declaration needs to be reintroduced. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:06:57 -08:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

writeback: use higher precision calculation in domain_dirty_limits() As vm.dirty_[background_]bytes can't be applied verbatim to multiple cgroup writeback domains, they get converted to percentages in domain_dirty_limits() and applied the same way as vm.dirty_[background]ratio. However, if the specified bytes is lower than 1% of available memory, the calculated ratios become zero and the writeback domain gets throttled constantly. Fix it by using per-PAGE_SIZE instead of percentage for ratio calculations. Also, the updated DIV_ROUND_UP() usages now should yield 1/4096 (0.0244%) as the minimum ratio as long as the specified bytes are above zero. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Miao Xie <miaoxie@huawei.com> Link: http://lkml.kernel.org/g/57333E75.3080309@huawei.com Cc: stable@vger.kernel.org # v4.2+ Fixes: 9fc3a43e1757 ("writeback: separate out domain_dirty_limits()") Reviewed-by: Jan Kara <jack@suse.cz> Adjusted comment based on Jan's suggestion. Signed-off-by: Jens Axboe <axboe@fb.com>

2016-05-27 14:34:46 -04:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

writeback: use higher precision calculation in domain_dirty_limits() As vm.dirty_[background_]bytes can't be applied verbatim to multiple cgroup writeback domains, they get converted to percentages in domain_dirty_limits() and applied the same way as vm.dirty_[background]ratio. However, if the specified bytes is lower than 1% of available memory, the calculated ratios become zero and the writeback domain gets throttled constantly. Fix it by using per-PAGE_SIZE instead of percentage for ratio calculations. Also, the updated DIV_ROUND_UP() usages now should yield 1/4096 (0.0244%) as the minimum ratio as long as the specified bytes are above zero. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Miao Xie <miaoxie@huawei.com> Link: http://lkml.kernel.org/g/57333E75.3080309@huawei.com Cc: stable@vger.kernel.org # v4.2+ Fixes: 9fc3a43e1757 ("writeback: separate out domain_dirty_limits()") Reviewed-by: Jan Kara <jack@suse.cz> Adjusted comment based on Jan's suggestion. Signed-off-by: Jens Axboe <axboe@fb.com>

2016-05-27 14:34:46 -04:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

writeback: use higher precision calculation in domain_dirty_limits() As vm.dirty_[background_]bytes can't be applied verbatim to multiple cgroup writeback domains, they get converted to percentages in domain_dirty_limits() and applied the same way as vm.dirty_[background]ratio. However, if the specified bytes is lower than 1% of available memory, the calculated ratios become zero and the writeback domain gets throttled constantly. Fix it by using per-PAGE_SIZE instead of percentage for ratio calculations. Also, the updated DIV_ROUND_UP() usages now should yield 1/4096 (0.0244%) as the minimum ratio as long as the specified bytes are above zero. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Miao Xie <miaoxie@huawei.com> Link: http://lkml.kernel.org/g/57333E75.3080309@huawei.com Cc: stable@vger.kernel.org # v4.2+ Fixes: 9fc3a43e1757 ("writeback: separate out domain_dirty_limits()") Reviewed-by: Jan Kara <jack@suse.cz> Adjusted comment based on Jan's suggestion. Signed-off-by: Jens Axboe <axboe@fb.com>

2016-05-27 14:34:46 -04:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

writeback: use higher precision calculation in domain_dirty_limits() As vm.dirty_[background_]bytes can't be applied verbatim to multiple cgroup writeback domains, they get converted to percentages in domain_dirty_limits() and applied the same way as vm.dirty_[background]ratio. However, if the specified bytes is lower than 1% of available memory, the calculated ratios become zero and the writeback domain gets throttled constantly. Fix it by using per-PAGE_SIZE instead of percentage for ratio calculations. Also, the updated DIV_ROUND_UP() usages now should yield 1/4096 (0.0244%) as the minimum ratio as long as the specified bytes are above zero. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Miao Xie <miaoxie@huawei.com> Link: http://lkml.kernel.org/g/57333E75.3080309@huawei.com Cc: stable@vger.kernel.org # v4.2+ Fixes: 9fc3a43e1757 ("writeback: separate out domain_dirty_limits()") Reviewed-by: Jan Kara <jack@suse.cz> Adjusted comment based on Jan's suggestion. Signed-off-by: Jens Axboe <axboe@fb.com>

2016-05-27 14:34:46 -04:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

writeback: use higher precision calculation in domain_dirty_limits() As vm.dirty_[background_]bytes can't be applied verbatim to multiple cgroup writeback domains, they get converted to percentages in domain_dirty_limits() and applied the same way as vm.dirty_[background]ratio. However, if the specified bytes is lower than 1% of available memory, the calculated ratios become zero and the writeback domain gets throttled constantly. Fix it by using per-PAGE_SIZE instead of percentage for ratio calculations. Also, the updated DIV_ROUND_UP() usages now should yield 1/4096 (0.0244%) as the minimum ratio as long as the specified bytes are above zero. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Miao Xie <miaoxie@huawei.com> Link: http://lkml.kernel.org/g/57333E75.3080309@huawei.com Cc: stable@vger.kernel.org # v4.2+ Fixes: 9fc3a43e1757 ("writeback: separate out domain_dirty_limits()") Reviewed-by: Jan Kara <jack@suse.cz> Adjusted comment based on Jan's suggestion. Signed-off-by: Jens Axboe <axboe@fb.com>

2016-05-27 14:34:46 -04:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

writeback: use higher precision calculation in domain_dirty_limits() As vm.dirty_[background_]bytes can't be applied verbatim to multiple cgroup writeback domains, they get converted to percentages in domain_dirty_limits() and applied the same way as vm.dirty_[background]ratio. However, if the specified bytes is lower than 1% of available memory, the calculated ratios become zero and the writeback domain gets throttled constantly. Fix it by using per-PAGE_SIZE instead of percentage for ratio calculations. Also, the updated DIV_ROUND_UP() usages now should yield 1/4096 (0.0244%) as the minimum ratio as long as the specified bytes are above zero. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Miao Xie <miaoxie@huawei.com> Link: http://lkml.kernel.org/g/57333E75.3080309@huawei.com Cc: stable@vger.kernel.org # v4.2+ Fixes: 9fc3a43e1757 ("writeback: separate out domain_dirty_limits()") Reviewed-by: Jan Kara <jack@suse.cz> Adjusted comment based on Jan's suggestion. Signed-off-by: Jens Axboe <axboe@fb.com>

2016-05-27 14:34:46 -04:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

Revert "mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical" This reverts commit 0f6d24f87856 ("mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical") because it causes false positive warnings during OOM situations as noticed by Tetsuo Handa: Node 0 active_anon:3525940kB inactive_anon:8372kB active_file:216kB inactive_file:1872kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:2504kB dirty:52kB writeback:0kB shmem:8660kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 636928kB writeback_tmp:0kB unstable:0kB all_unreclaimable? yes Node 0 DMA free:14848kB min:284kB low:352kB high:420kB active_anon:992kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15988kB managed:15904kB mlocked:0kB kernel_stack:0kB pagetables:24kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 2687 3645 3645 Node 0 DMA32 free:53004kB min:49608kB low:62008kB high:74408kB active_anon:2712648kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:3129216kB managed:2773132kB mlocked:0kB kernel_stack:96kB pagetables:5096kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 0 958 958 Node 0 Normal free:17140kB min:17684kB low:22104kB high:26524kB active_anon:812300kB inactive_anon:8372kB active_file:1228kB inactive_file:1868kB unevictable:0kB writepending:52kB present:1048576kB managed:981224kB mlocked:0kB kernel_stack:3520kB pagetables:8552kB bounce:0kB free_pcp:120kB local_pcp:120kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 [...] Out of memory: Kill process 8459 (a.out) score 999 or sacrifice child Killed process 8459 (a.out) total-vm:4180kB, anon-rss:88kB, file-rss:0kB, shmem-rss:0kB oom_reaper: reaped process 8459 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB vm direct limit must be set greater than background limit. The problem is that both thresh and bg_thresh will be 0 if available_memory is less than 4 pages when evaluating global_dirtyable_memory. While this might be worked around the whole point of the warning is dubious at best. We do rely on admins to do sensible things when changing tunable knobs. Dirty memory writeback knobs are not any special in that regards so revert the warning rather than adding more hacks to work this around. Debugged by Yafang Shao. Link: http://lkml.kernel.org/r/20171127091939.tahb77nznytcxw55@dhcp22.suse.cz Fixes: 0f6d24f87856 ("mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Yafang Shao <laoar.shao@gmail.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-29 16:10:58 -08:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

MM: increase safety margin provided by PF_LESS_THROTTLE When nfsd is exporting a filesystem over NFS which is then NFS-mounted on the local machine there is a risk of deadlock. This happens when there are lots of dirty pages in the NFS filesystem and they cause NFSD to be throttled, either in throttle_vm_writeout() or in balance_dirty_pages(). To avoid this problem the PF_LESS_THROTTLE flag is set for NFSD threads and it provides a 25% increase to the limits that affect NFSD. Any process writing to an NFS filesystem will be throttled well before the number of dirty NFS pages reaches the limit imposed on NFSD, so NFSD will not deadlock on pages that it needs to write out. At least it shouldn't. All processes are allowed a small excess margin to avoid performing too many calculations: ratelimit_pages. ratelimit_pages is set so that if a thread on every CPU uses the entire margin, the total will only go 3% over the limit, and this is much less than the 25% bonus that PF_LESS_THROTTLE provides, so this margin shouldn't be a problem. But it is. The "total memory" that these 3% and 25% are calculated against are not really total memory but are "global_dirtyable_memory()" which doesn't include anonymous memory, just free memory and page-cache memory. The "ratelimit_pages" number is based on whatever the global_dirtyable_memory was on the last CPU hot-plug, which might not be what you expect, but is probably close to the total freeable memory. The throttle threshold uses the global_dirtable_memory at the moment when the throttling happens, which could be much less than at the last CPU hotplug. So if lots of anonymous memory has been allocated, thus pushing out lots of page-cache pages, then NFSD might end up being throttled due to dirty NFS pages because the "25%" bonus it gets is calculated against a rather small amount of dirtyable memory, while the "3%" margin that other processes are allowed to dirty without penalty is calculated against a much larger number. To remove this possibility of deadlock we need to make sure that the margin granted to PF_LESS_THROTTLE exceeds that rate-limit margin. Simply adding ratelimit_pages isn't enough as that should be multiplied by the number of cpus. So add "global_wb_domain.dirty_limit / 32" as that more accurately reflects the current total over-shoot margin. This ensures that the number of dirty NFS pages never gets so high that nfsd will be throttled waiting for them to be written. Link: http://lkml.kernel.org/r/87futgowwv.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-05-20 16:58:53 -07:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

mm: writeback: cleanups in preparation for per-zone dirty limits The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:44 -08:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm: move most file-based accounting to the node There are now a number of accounting oddities such as mapped file pages being accounted for on the node while the total number of file pages are accounted on the zone. This can be coped with to some extent but it's confusing so this patch moves the relevant file-based accounted. Due to throttling logic in the page allocator for reliable OOM detection, it is still necessary to track dirty and writeback pages on a per-zone basis. [mgorman@techsingularity.net: fix NR_ZONE_WRITE_PENDING accounting] Link: http://lkml.kernel.org/r/1468404004-5085-5-git-send-email-mgorman@techsingularity.net Link: http://lkml.kernel.org/r/1467970510-21195-20-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:20 -07:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

mm, page_alloc: consider dirtyable memory in terms of nodes Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:11 -07:00

mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-01-10 15:07:49 -08:00

2009-01-06 14:39:31 -08:00

sysctl: remove "struct file *" argument of ->proc_handler It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-23 15:57:19 -07:00

2009-01-06 14:39:31 -08:00

sysctl: remove "struct file *" argument of ->proc_handler It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-23 15:57:19 -07:00

2009-01-06 14:39:31 -08:00

sysctl: remove "struct file *" argument of ->proc_handler It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-23 15:57:19 -07:00

2009-01-06 14:39:31 -08:00

sysctl: remove "struct file *" argument of ->proc_handler It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-23 15:57:19 -07:00

2009-01-06 14:39:31 -08:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

sysctl: remove "struct file *" argument of ->proc_handler It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-23 15:57:19 -07:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

2009-01-06 14:39:31 -08:00

sysctl: remove "struct file *" argument of ->proc_handler It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-23 15:57:19 -07:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

2009-01-06 14:39:31 -08:00

sysctl: remove "struct file *" argument of ->proc_handler It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-23 15:57:19 -07:00

2009-01-06 14:39:31 -08:00

mm: fix dirty_bytes/dirty_background_bytes sysctls on 64bit arches We need to pass an unsigned long as the minimum, because it gets casted to an unsigned long in the sysctl handler. If we pass an int, we'll access four more bytes on 64bit arches, resulting in a random minimum value. [rientjes@google.com: fix type of `old_bytes'] Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-02-11 13:04:23 -08:00

2009-01-06 14:39:31 -08:00

sysctl: remove "struct file *" argument of ->proc_handler It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-23 15:57:19 -07:00

2009-01-06 14:39:31 -08:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

2009-01-06 14:39:31 -08:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

writeback: make __wb_writeout_inc() and hard_dirty_limit() take wb_domaas a parameter Currently __wb_writeout_inc() and hard_dirty_limit() assume global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain-specific part of __wb_writeout_inc() into wb_domain_writeout_inc() which takes wb_domain as a parameter and adds the parameter to hard_dirty_limit(). This will allow these two functions to handle per-memcg wb_domains. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:29 -04:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

writeback: make __wb_writeout_inc() and hard_dirty_limit() take wb_domaas a parameter Currently __wb_writeout_inc() and hard_dirty_limit() assume global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain-specific part of __wb_writeout_inc() into wb_domain_writeout_inc() which takes wb_domain as a parameter and adds the parameter to hard_dirty_limit(). This will allow these two functions to handle per-memcg wb_domains. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:29 -04:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

mm/page-writeback.c: place "not" inside of unlikely() statement in wb_domain_writeout_inc() The likely/unlikely profiler noticed that the unlikely statement in wb_domain_writeout_inc() is constantly wrong. This is due to the "not" (!) being outside the unlikely statement. It is likely that dom->period_time will be set, but unlikely that it wont be. Move the not into the unlikely statement. Link: http://lkml.kernel.org/r/20170206120035.3c2e2b91@gandalf.local.home Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-02-24 14:59:24 -08:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

writeback: implement wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. Currently, what constitutes the global writeback domain are scattered across a number of global states. This patch starts collecting them into struct wb_domain. * fprop_global which serves as the basis for proportional bandwidth measurement and its period timer are moved into struct wb_domain. * global_wb_domain hosts the states for the global domain. * While at it, flatten wb_writeout_fraction() into its callers. This thin wrapper doesn't provide any actual benefits while getting in the way. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:21 -04:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

writeback: make __wb_writeout_inc() and hard_dirty_limit() take wb_domaas a parameter Currently __wb_writeout_inc() and hard_dirty_limit() assume global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain-specific part of __wb_writeout_inc() into wb_domain_writeout_inc() which takes wb_domain as a parameter and adds the parameter to hard_dirty_limit(). This will allow these two functions to handle per-memcg wb_domains. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:29 -04:00

mm: bdi: export bdi_writeout_inc() Fuse needs this for writable mmap support. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:37 -07:00

writeback: implement memcg wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. The previous patches laid the groundwork to support the two wb_domains and this patch implements memcg wb_domain. memcg->cgwb_domain is initialized on css online and destroyed on css release, wb->memcg_completions is added, and __wb_writeout_inc() is updated to increment completions against both global and memcg wb_domains. The following patches will update balance_dirty_pages() and its subroutines to actually consider memcg wb_domain for throttling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:33 -04:00

mm: bdi: export bdi_writeout_inc() Fuse needs this for writable mmap support. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:37 -07:00

writeback: rework wb_[dec|inc]_stat family of functions Currently the writeback statistics code uses a percpu counters to hold various statistics. Furthermore we have 2 families of functions - those which disable local irq and those which doesn't and whose names begin with double underscore. However, they both end up calling __add_wb_stats which in turn calls percpu_counter_add_batch which is already irq-safe. Exploiting this fact allows to eliminated the __wb_* functions since they don't add any further protection than we already have. Furthermore, refactor the wb_* function to call __add_wb_stat directly without the irq-disabling dance. This will likely result in better runtime of code which deals with modifying the stat counters. While at it also document why percpu_counter_add_batch is in fact preempt and irq-safe since at least 3 people got confused. Link: http://lkml.kernel.org/r/1498029937-27293-1-git-send-email-nborisov@suse.com Signed-off-by: Nikolay Borisov <nborisov@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Josef Bacik <jbacik@fb.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-07-12 14:37:51 -07:00

writeback: make __wb_writeout_inc() and hard_dirty_limit() take wb_domaas a parameter Currently __wb_writeout_inc() and hard_dirty_limit() assume global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain-specific part of __wb_writeout_inc() into wb_domain_writeout_inc() which takes wb_domain as a parameter and adds the parameter to hard_dirty_limit(). This will allow these two functions to handle per-memcg wb_domains. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:29 -04:00

writeback: implement memcg wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. The previous patches laid the groundwork to support the two wb_domains and this patch implements memcg wb_domain. memcg->cgwb_domain is initialized on css online and destroyed on css release, wb->memcg_completions is added, and __wb_writeout_inc() is updated to increment completions against both global and memcg wb_domains. The following patches will update balance_dirty_pages() and its subroutines to actually consider memcg wb_domain for throttling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:33 -04:00

mm: bdi: export bdi_writeout_inc() Fuse needs this for writable mmap support. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:37 -07:00

writeback: move backing_dev_info->bdi_stat[] into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bdi->bdi_stat[] into wb. * enum bdi_stat_item is renamed to wb_stat_item and the prefix of all enums is changed from BDI_ to WB_. * BDI_STAT_BATCH() -> WB_STAT_BATCH() * [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...) * bdi_stat[_error]() -> wb_stat[_error]() * bdi_writeout_inc() -> wb_writeout_inc() * stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and frees stat. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:27 -04:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

mm: bdi: export bdi_writeout_inc() Fuse needs this for writable mmap support. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:37 -07:00

writeback: move backing_dev_info->bdi_stat[] into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bdi->bdi_stat[] into wb. * enum bdi_stat_item is renamed to wb_stat_item and the prefix of all enums is changed from BDI_ to WB_. * BDI_STAT_BATCH() -> WB_STAT_BATCH() * [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...) * bdi_stat[_error]() -> wb_stat[_error]() * bdi_writeout_inc() -> wb_writeout_inc() * stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and frees stat. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:27 -04:00

mm: bdi: export bdi_writeout_inc() Fuse needs this for writable mmap support. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:37 -07:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

writeback: move backing_dev_info->bdi_stat[] into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bdi->bdi_stat[] into wb. * enum bdi_stat_item is renamed to wb_stat_item and the prefix of all enums is changed from BDI_ to WB_. * BDI_STAT_BATCH() -> WB_STAT_BATCH() * [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...) * bdi_stat[_error]() -> wb_stat[_error]() * bdi_writeout_inc() -> wb_writeout_inc() * stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and frees stat. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:27 -04:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

mm/page-writeback.c: convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Link: http://lkml.kernel.org/r/20171016225913.GA99214@beast Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-15 17:37:04 -08:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

mm/page-writeback.c: convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Link: http://lkml.kernel.org/r/20171016225913.GA99214@beast Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-15 17:37:04 -08:00

writeback: implement wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. Currently, what constitutes the global writeback domain are scattered across a number of global states. This patch starts collecting them into struct wb_domain. * fprop_global which serves as the basis for proportional bandwidth measurement and its period timer are moved into struct wb_domain. * global_wb_domain hosts the states for the global domain. * While at it, flatten wb_writeout_fraction() into its callers. This thin wrapper doesn't provide any actual benefits while getting in the way. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:21 -04:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

writeback: implement wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. Currently, what constitutes the global writeback domain are scattered across a number of global states. This patch starts collecting them into struct wb_domain. * fprop_global which serves as the basis for proportional bandwidth measurement and its period timer are moved into struct wb_domain. * global_wb_domain hosts the states for the global domain. * While at it, flatten wb_writeout_fraction() into its callers. This thin wrapper doesn't provide any actual benefits while getting in the way. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:21 -04:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

writeback: implement wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. Currently, what constitutes the global writeback domain are scattered across a number of global states. This patch starts collecting them into struct wb_domain. * fprop_global which serves as the basis for proportional bandwidth measurement and its period timer are moved into struct wb_domain. * global_wb_domain hosts the states for the global domain. * While at it, flatten wb_writeout_fraction() into its callers. This thin wrapper doesn't provide any actual benefits while getting in the way. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:21 -04:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

writeback: implement wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. Currently, what constitutes the global writeback domain are scattered across a number of global states. This patch starts collecting them into struct wb_domain. * fprop_global which serves as the basis for proportional bandwidth measurement and its period timer are moved into struct wb_domain. * global_wb_domain hosts the states for the global domain. * While at it, flatten wb_writeout_fraction() into its callers. This thin wrapper doesn't provide any actual benefits while getting in the way. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:21 -04:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

writeback: implement wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. Currently, what constitutes the global writeback domain are scattered across a number of global states. This patch starts collecting them into struct wb_domain. * fprop_global which serves as the basis for proportional bandwidth measurement and its period timer are moved into struct wb_domain. * global_wb_domain hosts the states for the global domain. * While at it, flatten wb_writeout_fraction() into its callers. This thin wrapper doesn't provide any actual benefits while getting in the way. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:21 -04:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

mm/page-writeback.c: convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Link: http://lkml.kernel.org/r/20171016225913.GA99214@beast Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-15 17:37:04 -08:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

writeback: implement wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. Currently, what constitutes the global writeback domain are scattered across a number of global states. This patch starts collecting them into struct wb_domain. * fprop_global which serves as the basis for proportional bandwidth measurement and its period timer are moved into struct wb_domain. * global_wb_domain hosts the states for the global domain. * While at it, flatten wb_writeout_fraction() into its callers. This thin wrapper doesn't provide any actual benefits while getting in the way. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:21 -04:00

writeback: implement memcg wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. The previous patches laid the groundwork to support the two wb_domains and this patch implements memcg wb_domain. memcg->cgwb_domain is initialized on css online and destroyed on css release, wb->memcg_completions is added, and __wb_writeout_inc() is updated to increment completions against both global and memcg wb_domains. The following patches will update balance_dirty_pages() and its subroutines to actually consider memcg wb_domain for throttling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:33 -04:00

mm: bdi: allow setting a minimum for the bdi dirty limit Under normal circumstances each device is given a part of the total write-back cache that relates to its current avg writeout speed in relation to the other devices. min_ratio - allows one to assign a minimum portion of the write-back cache to a particular device. This is useful in situations where you might want to provide a minimum QoS. (One request for this feature came from flash based storage people who wanted to avoid writing out at all costs - they of course needed some pdflush hacks as well) max_ratio - allows one to assign a maximum portion of the dirty limit to a particular device. This is useful in situations where you want to avoid one device taking all or most of the write-back cache. Eg. an NFS mount that is prone to get stuck, or a FUSE mount which you don't trust to play fair. Add "min_ratio" to /sys/class/bdi. This indicates the minimum percentage of the global dirty threshold allocated to this bdi. [mszeredi@suse.cz] - fix parsing in min_ratio_store() - document new sysfs attribute Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:35 -07:00

mm/page-writeback.c: document bdi_min_ratio Looks like someone got distracted after adding the comment characters. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2011-10-31 17:07:05 -07:00

mm: bdi: allow setting a minimum for the bdi dirty limit Under normal circumstances each device is given a part of the total write-back cache that relates to its current avg writeout speed in relation to the other devices. min_ratio - allows one to assign a minimum portion of the write-back cache to a particular device. This is useful in situations where you might want to provide a minimum QoS. (One request for this feature came from flash based storage people who wanted to avoid writing out at all costs - they of course needed some pdflush hacks as well) max_ratio - allows one to assign a maximum portion of the dirty limit to a particular device. This is useful in situations where you want to avoid one device taking all or most of the write-back cache. Eg. an NFS mount that is prone to get stuck, or a FUSE mount which you don't trust to play fair. Add "min_ratio" to /sys/class/bdi. This indicates the minimum percentage of the global dirty threshold allocated to this bdi. [mszeredi@suse.cz] - fix parsing in min_ratio_store() - document new sysfs attribute Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:35 -07:00

writeback: use RCU to protect bdi_list Now that bdi_writeback_all() no longer handles integrity writeback, it doesn't have to block anymore. This means that we can switch bdi_list reader side protection to RCU. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2009-09-14 13:12:40 +02:00

mm: bdi: allow setting a maximum for the bdi dirty limit Add "max_ratio" to /sys/class/bdi. This indicates the maximum percentage of the global dirty threshold allocated to this bdi. [mszeredi@suse.cz] - fix parsing in max_ratio_store(). - export bdi_set_max_ratio() to modules - limit bdi_dirty with bdi->max_ratio - document new sysfs attribute Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:36 -07:00

mm: bdi: allow setting a minimum for the bdi dirty limit Under normal circumstances each device is given a part of the total write-back cache that relates to its current avg writeout speed in relation to the other devices. min_ratio - allows one to assign a minimum portion of the write-back cache to a particular device. This is useful in situations where you might want to provide a minimum QoS. (One request for this feature came from flash based storage people who wanted to avoid writing out at all costs - they of course needed some pdflush hacks as well) max_ratio - allows one to assign a maximum portion of the dirty limit to a particular device. This is useful in situations where you want to avoid one device taking all or most of the write-back cache. Eg. an NFS mount that is prone to get stuck, or a FUSE mount which you don't trust to play fair. Add "min_ratio" to /sys/class/bdi. This indicates the minimum percentage of the global dirty threshold allocated to this bdi. [mszeredi@suse.cz] - fix parsing in min_ratio_store() - document new sysfs attribute Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:35 -07:00

mm: bdi: allow setting a maximum for the bdi dirty limit Add "max_ratio" to /sys/class/bdi. This indicates the maximum percentage of the global dirty threshold allocated to this bdi. [mszeredi@suse.cz] - fix parsing in max_ratio_store(). - export bdi_set_max_ratio() to modules - limit bdi_dirty with bdi->max_ratio - document new sysfs attribute Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:36 -07:00

writeback: use RCU to protect bdi_list Now that bdi_writeback_all() no longer handles integrity writeback, it doesn't have to block anymore. This means that we can switch bdi_list reader side protection to RCU. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2009-09-14 13:12:40 +02:00

mm: bdi: allow setting a maximum for the bdi dirty limit Add "max_ratio" to /sys/class/bdi. This indicates the maximum percentage of the global dirty threshold allocated to this bdi. [mszeredi@suse.cz] - fix parsing in max_ratio_store(). - export bdi_set_max_ratio() to modules - limit bdi_dirty with bdi->max_ratio - document new sysfs attribute Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:36 -07:00

writeback: use RCU to protect bdi_list Now that bdi_writeback_all() no longer handles integrity writeback, it doesn't have to block anymore. This means that we can switch bdi_list reader side protection to RCU. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2009-09-14 13:12:40 +02:00

mm: bdi: allow setting a maximum for the bdi dirty limit Add "max_ratio" to /sys/class/bdi. This indicates the maximum percentage of the global dirty threshold allocated to this bdi. [mszeredi@suse.cz] - fix parsing in max_ratio_store(). - export bdi_set_max_ratio() to modules - limit bdi_dirty with bdi->max_ratio - document new sysfs attribute Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:36 -07:00

block: Convert BDI proportion calculations to flexible proportions Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-05-24 18:59:11 +02:00

mm: bdi: allow setting a maximum for the bdi dirty limit Add "max_ratio" to /sys/class/bdi. This indicates the maximum percentage of the global dirty threshold allocated to this bdi. [mszeredi@suse.cz] - fix parsing in max_ratio_store(). - export bdi_set_max_ratio() to modules - limit bdi_dirty with bdi->max_ratio - document new sysfs attribute Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:36 -07:00

writeback: use RCU to protect bdi_list Now that bdi_writeback_all() no longer handles integrity writeback, it doesn't have to block anymore. This means that we can switch bdi_list reader side protection to RCU. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2009-09-14 13:12:40 +02:00

mm: bdi: allow setting a minimum for the bdi dirty limit Under normal circumstances each device is given a part of the total write-back cache that relates to its current avg writeout speed in relation to the other devices. min_ratio - allows one to assign a minimum portion of the write-back cache to a particular device. This is useful in situations where you might want to provide a minimum QoS. (One request for this feature came from flash based storage people who wanted to avoid writing out at all costs - they of course needed some pdflush hacks as well) max_ratio - allows one to assign a maximum portion of the dirty limit to a particular device. This is useful in situations where you want to avoid one device taking all or most of the write-back cache. Eg. an NFS mount that is prone to get stuck, or a FUSE mount which you don't trust to play fair. Add "min_ratio" to /sys/class/bdi. This indicates the minimum percentage of the global dirty threshold allocated to this bdi. [mszeredi@suse.cz] - fix parsing in min_ratio_store() - document new sysfs attribute Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:35 -07:00

mm: bdi: allow setting a maximum for the bdi dirty limit Add "max_ratio" to /sys/class/bdi. This indicates the maximum percentage of the global dirty threshold allocated to this bdi. [mszeredi@suse.cz] - fix parsing in max_ratio_store(). - export bdi_set_max_ratio() to modules - limit bdi_dirty with bdi->max_ratio - document new sysfs attribute Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:36 -07:00

mm: bdi: allow setting a minimum for the bdi dirty limit Under normal circumstances each device is given a part of the total write-back cache that relates to its current avg writeout speed in relation to the other devices. min_ratio - allows one to assign a minimum portion of the write-back cache to a particular device. This is useful in situations where you might want to provide a minimum QoS. (One request for this feature came from flash based storage people who wanted to avoid writing out at all costs - they of course needed some pdflush hacks as well) max_ratio - allows one to assign a maximum portion of the dirty limit to a particular device. This is useful in situations where you want to avoid one device taking all or most of the write-back cache. Eg. an NFS mount that is prone to get stuck, or a FUSE mount which you don't trust to play fair. Add "min_ratio" to /sys/class/bdi. This indicates the minimum percentage of the global dirty threshold allocated to this bdi. [mszeredi@suse.cz] - fix parsing in min_ratio_store() - document new sysfs attribute Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:35 -07:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: make __wb_writeout_inc() and hard_dirty_limit() take wb_domaas a parameter Currently __wb_writeout_inc() and hard_dirty_limit() assume global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain-specific part of __wb_writeout_inc() into wb_domain_writeout_inc() which takes wb_domain as a parameter and adds the parameter to hard_dirty_limit(). This will allow these two functions to handle per-memcg wb_domains. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:29 -04:00

writeback: introduce max-pause and pass-good dirty limits The max-pause limit helps to keep the sleep time inside balance_dirty_pages() within MAX_PAUSE=200ms. The 200ms max sleep means per task rate limit of 8pages/200ms=160KB/s when dirty exceeded, which normally is enough to stop dirtiers from continue pushing the dirty pages high, unless there are a sufficient large number of slow dirtiers (eg. 500 tasks doing 160KB/s will still sum up to 80MB/s, exceeding the write bandwidth of a slow disk and hence accumulating more and more dirty pages). The pass-good limit helps to let go of the good bdi's in the presence of a blocked bdi (ie. NFS server not responding) or slow USB disk which for some reason build up a large number of initial dirty pages that refuse to go away anytime soon. For example, given two bdi's A and B and the initial state bdi_thresh_A = dirty_thresh / 2 bdi_thresh_B = dirty_thresh / 2 bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 Then A get blocked, after a dozen seconds bdi_thresh_A = 0 bdi_thresh_B = dirty_thresh bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 The (bdi_dirty_B < bdi_thresh_B) test is now useless and the dirty pages will be effectively throttled by condition (nr_dirty < dirty_thresh). This has two problems: (1) we lose the protections for light dirtiers (2) balance_dirty_pages() effectively becomes IO-less because the (bdi_nr_reclaimable > bdi_thresh) test won't be true. This is good for IO, but balance_dirty_pages() loses an important way to break out of the loop which leads to more spread out throttle delays. DIRTY_PASSGOOD_AREA can eliminate the above issues. The only problem is, DIRTY_PASSGOOD_AREA needs to be defined as 2 to fully cover the above example while this patch uses the more conservative value 8 so as not to surprise people with too many dirty pages than expected. The max-pause limit won't noticeably impact the speed dirty pages are knocked down when there is a sudden drop of global/bdi dirty thresholds. Because the heavy dirties will be throttled below 160KB/s which is slow enough. It does help to avoid long dirty throttle delays and especially will make light dirtiers more responsive. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-19 22:18:42 -06:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

writeback: introduce max-pause and pass-good dirty limits The max-pause limit helps to keep the sleep time inside balance_dirty_pages() within MAX_PAUSE=200ms. The 200ms max sleep means per task rate limit of 8pages/200ms=160KB/s when dirty exceeded, which normally is enough to stop dirtiers from continue pushing the dirty pages high, unless there are a sufficient large number of slow dirtiers (eg. 500 tasks doing 160KB/s will still sum up to 80MB/s, exceeding the write bandwidth of a slow disk and hence accumulating more and more dirty pages). The pass-good limit helps to let go of the good bdi's in the presence of a blocked bdi (ie. NFS server not responding) or slow USB disk which for some reason build up a large number of initial dirty pages that refuse to go away anytime soon. For example, given two bdi's A and B and the initial state bdi_thresh_A = dirty_thresh / 2 bdi_thresh_B = dirty_thresh / 2 bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 Then A get blocked, after a dozen seconds bdi_thresh_A = 0 bdi_thresh_B = dirty_thresh bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 The (bdi_dirty_B < bdi_thresh_B) test is now useless and the dirty pages will be effectively throttled by condition (nr_dirty < dirty_thresh). This has two problems: (1) we lose the protections for light dirtiers (2) balance_dirty_pages() effectively becomes IO-less because the (bdi_nr_reclaimable > bdi_thresh) test won't be true. This is good for IO, but balance_dirty_pages() loses an important way to break out of the loop which leads to more spread out throttle delays. DIRTY_PASSGOOD_AREA can eliminate the above issues. The only problem is, DIRTY_PASSGOOD_AREA needs to be defined as 2 to fully cover the above example while this patch uses the more conservative value 8 so as not to surprise people with too many dirty pages than expected. The max-pause limit won't noticeably impact the speed dirty pages are knocked down when there is a sudden drop of global/bdi dirty thresholds. Because the heavy dirties will be throttled below 160KB/s which is slow enough. It does help to avoid long dirty throttle delays and especially will make light dirtiers more responsive. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-19 22:18:42 -06:00

writeback: fix incorrect calculation of available memory for memcg domains For memcg domains, the amount of available memory was calculated as min(the amount currently in use + headroom according to memcg, total clean memory) This isn't quite correct as what should be capped by the amount of clean memory is the headroom, not the sum of memory in use and headroom. For example, if a memcg domain has a significant amount of dirty memory, the above can lead to a value which is lower than the current amount in use which doesn't make much sense. In most circumstances, the above leads to a number which is somewhat but not drastically lower. As the amount of memory which can be readily allocated to the memcg domain is capped by the amount of system-wide clean memory which is not already assigned to the memcg itself, the number we want is the amount currently in use + min(headroom according to memcg, clean memory elsewhere in the system) This patch updates mem_cgroup_wb_stats() to return the number of filepages and headroom instead of the calculated available pages. mdtc_cap_avail() is renamed to mdtc_calc_avail() and performs the above calculation from file, headroom, dirty and globally clean pages. v2: Dummy mem_cgroup_wb_stats() implementation wasn't updated leading to build failure when !CGROUP_WRITEBACK. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c2aa723a6093 ("writeback: implement memcg writeback domain based throttling") Signed-off-by: Jens Axboe <axboe@fb.com>

2015-09-29 13:04:26 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: fix incorrect calculation of available memory for memcg domains For memcg domains, the amount of available memory was calculated as min(the amount currently in use + headroom according to memcg, total clean memory) This isn't quite correct as what should be capped by the amount of clean memory is the headroom, not the sum of memory in use and headroom. For example, if a memcg domain has a significant amount of dirty memory, the above can lead to a value which is lower than the current amount in use which doesn't make much sense. In most circumstances, the above leads to a number which is somewhat but not drastically lower. As the amount of memory which can be readily allocated to the memcg domain is capped by the amount of system-wide clean memory which is not already assigned to the memcg itself, the number we want is the amount currently in use + min(headroom according to memcg, clean memory elsewhere in the system) This patch updates mem_cgroup_wb_stats() to return the number of filepages and headroom instead of the calculated available pages. mdtc_cap_avail() is renamed to mdtc_calc_avail() and performs the above calculation from file, headroom, dirty and globally clean pages. v2: Dummy mem_cgroup_wb_stats() implementation wasn't updated leading to build failure when !CGROUP_WRITEBACK. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c2aa723a6093 ("writeback: implement memcg writeback domain based throttling") Signed-off-by: Jens Axboe <axboe@fb.com>

2015-09-29 13:04:26 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: fix incorrect calculation of available memory for memcg domains For memcg domains, the amount of available memory was calculated as min(the amount currently in use + headroom according to memcg, total clean memory) This isn't quite correct as what should be capped by the amount of clean memory is the headroom, not the sum of memory in use and headroom. For example, if a memcg domain has a significant amount of dirty memory, the above can lead to a value which is lower than the current amount in use which doesn't make much sense. In most circumstances, the above leads to a number which is somewhat but not drastically lower. As the amount of memory which can be readily allocated to the memcg domain is capped by the amount of system-wide clean memory which is not already assigned to the memcg itself, the number we want is the amount currently in use + min(headroom according to memcg, clean memory elsewhere in the system) This patch updates mem_cgroup_wb_stats() to return the number of filepages and headroom instead of the calculated available pages. mdtc_cap_avail() is renamed to mdtc_calc_avail() and performs the above calculation from file, headroom, dirty and globally clean pages. v2: Dummy mem_cgroup_wb_stats() implementation wasn't updated leading to build failure when !CGROUP_WRITEBACK. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c2aa723a6093 ("writeback: implement memcg writeback domain based throttling") Signed-off-by: Jens Axboe <axboe@fb.com>

2015-09-29 13:04:26 -04:00

writeback: introduce max-pause and pass-good dirty limits The max-pause limit helps to keep the sleep time inside balance_dirty_pages() within MAX_PAUSE=200ms. The 200ms max sleep means per task rate limit of 8pages/200ms=160KB/s when dirty exceeded, which normally is enough to stop dirtiers from continue pushing the dirty pages high, unless there are a sufficient large number of slow dirtiers (eg. 500 tasks doing 160KB/s will still sum up to 80MB/s, exceeding the write bandwidth of a slow disk and hence accumulating more and more dirty pages). The pass-good limit helps to let go of the good bdi's in the presence of a blocked bdi (ie. NFS server not responding) or slow USB disk which for some reason build up a large number of initial dirty pages that refuse to go away anytime soon. For example, given two bdi's A and B and the initial state bdi_thresh_A = dirty_thresh / 2 bdi_thresh_B = dirty_thresh / 2 bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 Then A get blocked, after a dozen seconds bdi_thresh_A = 0 bdi_thresh_B = dirty_thresh bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 The (bdi_dirty_B < bdi_thresh_B) test is now useless and the dirty pages will be effectively throttled by condition (nr_dirty < dirty_thresh). This has two problems: (1) we lose the protections for light dirtiers (2) balance_dirty_pages() effectively becomes IO-less because the (bdi_nr_reclaimable > bdi_thresh) test won't be true. This is good for IO, but balance_dirty_pages() loses an important way to break out of the loop which leads to more spread out throttle delays. DIRTY_PASSGOOD_AREA can eliminate the above issues. The only problem is, DIRTY_PASSGOOD_AREA needs to be defined as 2 to fully cover the above example while this patch uses the more conservative value 8 so as not to surprise people with too many dirty pages than expected. The max-pause limit won't noticeably impact the speed dirty pages are knocked down when there is a sudden drop of global/bdi dirty thresholds. Because the heavy dirties will be throttled below 160KB/s which is slow enough. It does help to avoid long dirty throttle delays and especially will make light dirtiers more responsive. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-19 22:18:42 -06:00

writeback: add bdi_dirty_limit() kernel-doc Clarify the bdi_dirty_limit() comment. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 17:14:34 -06:00

writeback: make __wb_calc_thresh() take dirty_throttle_control wb_calc_thresh() calculates wb_thresh by scaling thresh according to the wb's portion in the system-wide write bandwidth. cgroup writeback support would need to calculate wb_thresh against memcg domain too. This patch renames wb_calc_thresh() to __wb_calc_thresh() and makes it take dirty_throttle_control so that the function can later be updated to calculate against different domains according to dirty_throttle_control. wb_calc_thresh() is now a thin wrapper around __wb_calc_thresh(). v2: The original version was incorrectly scaling dtc->dirty instead of dtc->thresh. This was due to the extremely confusing function and variable names. Added a rename patch and fixed this one. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:25 -04:00

writeback: add comment to the dirty limit functions Document global_dirty_limits() and bdi_dirty_limit(). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:40 -07:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: add bdi_dirty_limit() kernel-doc Clarify the bdi_dirty_limit() comment. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 17:14:34 -06:00

writeback: comment on the bdi dirty threshold We do "floating proportions" to let active devices to grow its target share of dirty pages and stalled/inactive devices to decrease its target share over time. It works well except in the case of "an inactive disk suddenly goes busy", where the initial target share may be too small. To mitigate this, bdi_position_ratio() has the below line to raise a small bdi_thresh when it's safe to do so, so that the disk be feed with enough dirty pages for efficient IO and in turn fast rampup of bdi_thresh: bdi_thresh = max(bdi_thresh, (limit - dirty) / 8); balance_dirty_pages() normally does negative feedback control which adjusts ratelimit to balance the bdi dirty pages around the target. In some extreme cases when that is not enough, it will have to block the tasks completely until the bdi dirty pages drop below bdi_thresh. Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-23 11:44:41 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: add comment to the dirty limit functions Document global_dirty_limits() and bdi_dirty_limit(). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:40 -07:00

writeback: add bdi_dirty_limit() kernel-doc Clarify the bdi_dirty_limit() comment. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 17:14:34 -06:00

writeback: add comment to the dirty limit functions Document global_dirty_limits() and bdi_dirty_limit(). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:40 -07:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: add comment to the dirty limit functions Document global_dirty_limits() and bdi_dirty_limit(). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:40 -07:00

writeback: make __wb_calc_thresh() take dirty_throttle_control wb_calc_thresh() calculates wb_thresh by scaling thresh according to the wb's portion in the system-wide write bandwidth. cgroup writeback support would need to calculate wb_thresh against memcg domain too. This patch renames wb_calc_thresh() to __wb_calc_thresh() and makes it take dirty_throttle_control so that the function can later be updated to calculate against different domains according to dirty_throttle_control. wb_calc_thresh() is now a thin wrapper around __wb_calc_thresh(). v2: The original version was incorrectly scaling dtc->dirty instead of dtc->thresh. This was due to the extremely confusing function and variable names. Added a rename patch and fixed this one. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:25 -04:00

writeback: avoid unnecessary calculation of bdi dirty thresholds Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so that the latter can be avoided when under global dirty background threshold (which is the normal state for most systems). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:39 -07:00

writeback: add dirty_throttle_control->dom Currently all dirty throttle operations use global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch adds dirty_throttle_control->dom and updates functions which are directly using globabl_wb_domain to use it instead. As this makes global_update_bandwidth() a misnomer, the function is renamed to domain_update_bandwidth(). This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:28 -04:00

writeback: make __wb_calc_thresh() take dirty_throttle_control wb_calc_thresh() calculates wb_thresh by scaling thresh according to the wb's portion in the system-wide write bandwidth. cgroup writeback support would need to calculate wb_thresh against memcg domain too. This patch renames wb_calc_thresh() to __wb_calc_thresh() and makes it take dirty_throttle_control so that the function can later be updated to calculate against different domains according to dirty_throttle_control. wb_calc_thresh() is now a thin wrapper around __wb_calc_thresh(). v2: The original version was incorrectly scaling dtc->dirty instead of dtc->thresh. This was due to the extremely confusing function and variable names. Added a rename patch and fixed this one. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:25 -04:00

writeback: clean up wb_dirty_limit() The function name wb_dirty_limit(), its argument @dirty and the local variable @wb_dirty are mortally confusing given that the function calculates per-wb threshold value not dirty pages, especially given that @dirty and @wb_dirty are used elsewhere for dirty pages. Let's rename the function to wb_calc_thresh() and wb_dirty to wb_thresh. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:19 -04:00

writeback: avoid unnecessary calculation of bdi dirty thresholds Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so that the latter can be avoided when under global dirty background threshold (which is the normal state for most systems). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:39 -07:00

writeback: make bdi->min/max_ratio handling cgroup writeback aware bdi->min/max_ratio are user-configurable per-bdi knobs which regulate dirty limit of each bdi. For cgroup writeback, they need to be further distributed across wb's (bdi_writeback's) belonging to the configured bdi. This patch introduces wb_min_max_ratio() which distributes bdi->min/max_ratio according to a wb's proportion in the total active bandwidth of its bdi. v2: Update wb_min_max_ratio() to fix a bug where both min and max were assigned the min value and avoid calculations when possible. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:49 -04:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

writeback: avoid unnecessary calculation of bdi dirty thresholds Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so that the latter can be avoided when under global dirty background threshold (which is the normal state for most systems). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:39 -07:00

writeback: clean up wb_dirty_limit() The function name wb_dirty_limit(), its argument @dirty and the local variable @wb_dirty are mortally confusing given that the function calculates per-wb threshold value not dirty pages, especially given that @dirty and @wb_dirty are used elsewhere for dirty pages. Let's rename the function to wb_calc_thresh() and wb_dirty to wb_thresh. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:19 -04:00

writeback: avoid unnecessary calculation of bdi dirty thresholds Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so that the latter can be avoided when under global dirty background threshold (which is the normal state for most systems). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:39 -07:00

writeback: add dirty_throttle_control->wb_completions wb->completions measures the wb's proportional write bandwidth in global_wb_domain and thus naturally tied to the wb_domain. This patch adds dirty_throttle_control->wb_completions which is initialized to wb->completions by GDTC_INIT() and updates __wb_dirty_limits() to use it instead of dereferencing wb->completions directly. This will allow dirty_throttle_control to represent different wb_domains and the matching wb completions. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:27 -04:00

writeback: implement wb_domain Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. Currently, what constitutes the global writeback domain are scattered across a number of global states. This patch starts collecting them into struct wb_domain. * fprop_global which serves as the basis for proportional bandwidth measurement and its period timer are moved into struct wb_domain. * global_wb_domain hosts the states for the global domain. * While at it, flatten wb_writeout_fraction() into its callers. This thin wrapper doesn't provide any actual benefits while getting in the way. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:21 -04:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

writeback: clean up wb_dirty_limit() The function name wb_dirty_limit(), its argument @dirty and the local variable @wb_dirty are mortally confusing given that the function calculates per-wb threshold value not dirty pages, especially given that @dirty and @wb_dirty are used elsewhere for dirty pages. Let's rename the function to wb_calc_thresh() and wb_dirty to wb_thresh. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:19 -04:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

writeback: make __wb_calc_thresh() take dirty_throttle_control wb_calc_thresh() calculates wb_thresh by scaling thresh according to the wb's portion in the system-wide write bandwidth. cgroup writeback support would need to calculate wb_thresh against memcg domain too. This patch renames wb_calc_thresh() to __wb_calc_thresh() and makes it take dirty_throttle_control so that the function can later be updated to calculate against different domains according to dirty_throttle_control. wb_calc_thresh() is now a thin wrapper around __wb_calc_thresh(). v2: The original version was incorrectly scaling dtc->dirty instead of dtc->thresh. This was due to the extremely confusing function and variable names. Added a rename patch and fixed this one. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:25 -04:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

writeback: clean up wb_dirty_limit() The function name wb_dirty_limit(), its argument @dirty and the local variable @wb_dirty are mortally confusing given that the function calculates per-wb threshold value not dirty pages, especially given that @dirty and @wb_dirty are used elsewhere for dirty pages. Let's rename the function to wb_calc_thresh() and wb_dirty to wb_thresh. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:19 -04:00

writeback: avoid unnecessary calculation of bdi dirty thresholds Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so that the latter can be avoided when under global dirty background threshold (which is the normal state for most systems). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:39 -07:00

writeback: clean up wb_dirty_limit() The function name wb_dirty_limit(), its argument @dirty and the local variable @wb_dirty are mortally confusing given that the function calculates per-wb threshold value not dirty pages, especially given that @dirty and @wb_dirty are used elsewhere for dirty pages. Let's rename the function to wb_calc_thresh() and wb_dirty to wb_thresh. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:19 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: make __wb_calc_thresh() take dirty_throttle_control wb_calc_thresh() calculates wb_thresh by scaling thresh according to the wb's portion in the system-wide write bandwidth. cgroup writeback support would need to calculate wb_thresh against memcg domain too. This patch renames wb_calc_thresh() to __wb_calc_thresh() and makes it take dirty_throttle_control so that the function can later be updated to calculate against different domains according to dirty_throttle_control. wb_calc_thresh() is now a thin wrapper around __wb_calc_thresh(). v2: The original version was incorrectly scaling dtc->dirty instead of dtc->thresh. This was due to the extremely confusing function and variable names. Added a rename patch and fixed this one. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:25 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

mm/page-writeback.c: fix divide by zero in pos_ratio_polynom It is possible for "limit - setpoint + 1" to equal zero, after getting truncated to a 32 bit variable, and resulting in a divide by zero error. Using the fully 64 bit divide functions avoids this problem. It also will cause pos_ratio_polynom() to return the correct value when (setpoint - limit) exceeds 2^32. Also uninline pos_ratio_polynom, at Andrew's request. Signed-off-by: Rik van Riel <riel@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-05-06 12:50:01 -07:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

mm/page-writeback.c: fix divide by zero in pos_ratio_polynom It is possible for "limit - setpoint + 1" to equal zero, after getting truncated to a 32 bit variable, and resulting in a divide by zero error. Using the fully 64 bit divide functions avoids this problem. It also will cause pos_ratio_polynom() to return the correct value when (setpoint - limit) exceeds 2^32. Also uninline pos_ratio_polynom, at Andrew's request. Signed-off-by: Rik van Riel <riel@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-05-06 12:50:01 -07:00

writeback: use |1 instead of +1 to protect against div by zero mm/page-writeback.c has several places where 1 is added to the divisor to prevent division by zero exceptions; however, if the original divisor is equivalent to -1, adding 1 leads to division by zero. There are three places where +1 is used for this purpose - one in pos_ratio_polynom() and two in bdi_position_ratio(). The second one in bdi_position_ratio() actually triggered div-by-zero oops on a machine running a 3.10 kernel. The divisor is x_intercept - bdi_setpoint + 1 == span + 1 span is confirmed to be (u32)-1. It isn't clear how it ended up that but it could be from write bandwidth calculation underflow fixed by c72efb658f7c ("writeback: fix possible underflow in write bandwidth calculation"). At any rate, +1 isn't a proper protection against div-by-zero. This patch converts all +1 protections to |1. Note that bdi_update_dirty_ratelimit() was already using |1 before this patch. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-04-21 16:49:13 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: add dirty_throttle_control->pos_ratio wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:26 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: make __wb_writeout_inc() and hard_dirty_limit() take wb_domaas a parameter Currently __wb_writeout_inc() and hard_dirty_limit() assume global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain-specific part of __wb_writeout_inc() into wb_domain_writeout_inc() which takes wb_domain as a parameter and adds the parameter to hard_dirty_limit(). This will allow these two functions to handle per-memcg wb_domains. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:29 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: add dirty_throttle_control->pos_ratio wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:26 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: add dirty_throttle_control->pos_ratio wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:26 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: clean up wb_dirty_limit() The function name wb_dirty_limit(), its argument @dirty and the local variable @wb_dirty are mortally confusing given that the function calculates per-wb threshold value not dirty pages, especially given that @dirty and @wb_dirty are used elsewhere for dirty pages. Let's rename the function to wb_calc_thresh() and wb_dirty to wb_thresh. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:19 -04:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: add dirty_throttle_control->pos_ratio wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:26 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: add dirty_throttle_control->pos_ratio wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:26 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: add dirty_throttle_control->wb_bg_thresh wb_bg_thresh is currently treated as a second-class citizen. It's only used when BDI_CAP_STRICTLIMIT is set and balance_dirty_pages() doesn't calculate it unless the cap is set. When the cap is set, the calculated value is not passed around but instead recalculated whenever it's used. wb_position_ratio() calculates it by scaling wb_thresh proportional to bg_thresh / thresh. wb_update_dirty_ratelimit() uses wb_dirty_limit() on bg_thresh, which should generally lead to a similar result as the proportional scaling but can also be way off in the presence of max/min_ratio settings. Avoiding wb_bg_thresh calculation saves us one u64 multiplication and divsion when BDI_CAP_STRICTLIMIT is not set. Given that balance_dirty_pages() is already ratelimited, this doesn't justify the incurred extra complexity. This patch adds wb_bg_thresh to dirty_throttle_control and makes wb_dirty_limits() always calculate it and updates the users to use the pre-calculated value. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:24 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: add dirty_throttle_control->pos_ratio wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:26 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: add dirty_throttle_control->pos_ratio wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:26 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: comment on the bdi dirty threshold We do "floating proportions" to let active devices to grow its target share of dirty pages and stalled/inactive devices to decrease its target share over time. It works well except in the case of "an inactive disk suddenly goes busy", where the initial target share may be too small. To mitigate this, bdi_position_ratio() has the below line to raise a small bdi_thresh when it's safe to do so, so that the disk be feed with enough dirty pages for efficient IO and in turn fast rampup of bdi_thresh: bdi_thresh = max(bdi_thresh, (limit - dirty) / 8); balance_dirty_pages() normally does negative feedback control which adjusts ratelimit to balance the bdi dirty pages around the target. In some extreme cases when that is not enough, it will have to block the tasks completely until the bdi dirty pages drop below bdi_thresh. Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-23 11:44:41 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: comment on the bdi dirty threshold We do "floating proportions" to let active devices to grow its target share of dirty pages and stalled/inactive devices to decrease its target share over time. It works well except in the case of "an inactive disk suddenly goes busy", where the initial target share may be too small. To mitigate this, bdi_position_ratio() has the below line to raise a small bdi_thresh when it's safe to do so, so that the disk be feed with enough dirty pages for efficient IO and in turn fast rampup of bdi_thresh: bdi_thresh = max(bdi_thresh, (limit - dirty) / 8); balance_dirty_pages() normally does negative feedback control which adjusts ratelimit to balance the bdi dirty pages around the target. In some extreme cases when that is not enough, it will have to block the tasks completely until the bdi dirty pages drop below bdi_thresh. Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-23 11:44:41 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-block Pull cgroup writeback support from Jens Axboe: "This is the big pull request for adding cgroup writeback support. This code has been in development for a long time, and it has been simmering in for-next for a good chunk of this cycle too. This is one of those problems that has been talked about for at least half a decade, finally there's a solution and code to go with it. Also see last weeks writeup on LWN: http://lwn.net/Articles/648292/" * 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits) writeback, blkio: add documentation for cgroup writeback support vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB writeback: do foreign inode detection iff cgroup writeback is enabled v9fs: fix error handling in v9fs_session_init() bdi: fix wrong error return value in cgwb_create() buffer: remove unusued 'ret' variable writeback: disassociate inodes from dying bdi_writebacks writeback: implement foreign cgroup inode bdi_writeback switching writeback: add lockdep annotation to inode_to_wb() writeback: use unlocked_inode_to_wb transaction in inode_congested() writeback: implement unlocked_inode_to_wb transaction and use it for stat updates writeback: implement [locked_]inode_to_wb_and_lock_list() writeback: implement foreign cgroup inode detection writeback: make writeback_control track the inode being written back writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb() mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use writeback: implement memcg writeback domain based throttling writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes writeback: implement memcg wb_domain writeback: update wb_over_bg_thresh() to use wb_domain aware operations ...

2015-06-25 16:00:17 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-block Pull cgroup writeback support from Jens Axboe: "This is the big pull request for adding cgroup writeback support. This code has been in development for a long time, and it has been simmering in for-next for a good chunk of this cycle too. This is one of those problems that has been talked about for at least half a decade, finally there's a solution and code to go with it. Also see last weeks writeup on LWN: http://lwn.net/Articles/648292/" * 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits) writeback, blkio: add documentation for cgroup writeback support vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB writeback: do foreign inode detection iff cgroup writeback is enabled v9fs: fix error handling in v9fs_session_init() bdi: fix wrong error return value in cgwb_create() buffer: remove unusued 'ret' variable writeback: disassociate inodes from dying bdi_writebacks writeback: implement foreign cgroup inode bdi_writeback switching writeback: add lockdep annotation to inode_to_wb() writeback: use unlocked_inode_to_wb transaction in inode_congested() writeback: implement unlocked_inode_to_wb transaction and use it for stat updates writeback: implement [locked_]inode_to_wb_and_lock_list() writeback: implement foreign cgroup inode detection writeback: make writeback_control track the inode being written back writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb() mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use writeback: implement memcg writeback domain based throttling writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes writeback: implement memcg wb_domain writeback: update wb_over_bg_thresh() to use wb_domain aware operations ...

2015-06-25 16:00:17 -07:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: dirty position control - bdi reserve area Keep a minimal pool of dirty pages for each bdi, so that the disk IO queues won't underrun. Also gently increase a small bdi_thresh to avoid it stuck in 0 for some light dirtied bdi. It's particularly useful for JBOD and small memory system. It may result in (pos_ratio > 1) at the setpoint and push the dirty pages high. This is more or less intended because the bdi is in the danger of IO queue underflow. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-08-04 22:16:46 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty position control - bdi reserve area Keep a minimal pool of dirty pages for each bdi, so that the disk IO queues won't underrun. Also gently increase a small bdi_thresh to avoid it stuck in 0 for some light dirtied bdi. It's particularly useful for JBOD and small memory system. It may result in (pos_ratio > 1) at the setpoint and push the dirty pages high. This is more or less intended because the bdi is in the danger of IO queue underflow. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-08-04 22:16:46 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: fix ppc compile warnings on do_div(long long, unsigned long) Fix powerpc compile warnings mm/page-writeback.c: In function 'bdi_position_ratio': mm/page-writeback.c:622:3: warning: comparison of distinct pointer types lacks a cast [enabled by default] page-writeback.c:635:4: warning: comparison of distinct pointer types lacks a cast [enabled by default] Also fix gcc "uninitialized var" warnings. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-10-11 17:06:33 -06:00

writeback: dirty position control - bdi reserve area Keep a minimal pool of dirty pages for each bdi, so that the disk IO queues won't underrun. Also gently increase a small bdi_thresh to avoid it stuck in 0 for some light dirtied bdi. It's particularly useful for JBOD and small memory system. It may result in (pos_ratio > 1) at the setpoint and push the dirty pages high. This is more or less intended because the bdi is in the danger of IO queue underflow. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-08-04 22:16:46 -06:00

writeback: add dirty_throttle_control->pos_ratio wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:26 -04:00

writeback: dirty position control bdi_position_ratio() provides a scale factor to bdi->dirty_ratelimit, so that the resulted task rate limit can drive the dirty pages back to the global/bdi setpoints. Old scheme is, | free run area | throttle area ----------------------------------------+----------------------------> thresh^ dirty pages New scheme is, ^ task rate limit | | * | * | * |[free run] * [smooth throttled] | * | * | * ..bdi->dirty_ratelimit..........* | . * | . * | . * | . * | . * +-------------------------------.-----------------------*------------> setpoint^ limit^ dirty pages The slope of the bdi control line should be 1) large enough to pull the dirty pages to setpoint reasonably fast 2) small enough to avoid big fluctuations in the resulted pos_ratio and hence task ratelimit Since the fluctuation range of the bdi dirty pages is typically observed to be within 1-second worth of data, the bdi control line's slope is selected to be a linear function of bdi write bandwidth, so that it can adapt to slow/fast storage devices well. Assume the bdi control line pos_ratio = 1.0 + k * (dirty - bdi_setpoint) where k is the negative slope. If targeting for 12.5% fluctuation range in pos_ratio when dirty pages are fluctuating in range [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2], we get slope k = - 1 / (8 * write_bw) Let pos_ratio(x_intercept) = 0, we get the parameter used in code: x_intercept = bdi_setpoint + 8 * write_bw The global/bdi slopes are nicely complementing each other when the system has only one major bdi (indicated by bdi_thresh ~= thresh): 1) slope of global control line => scaling to the control scope size 2) slope of main bdi control line => scaling to the writeout bandwidth so that - in memory tight systems, (1) becomes strong enough to squeeze dirty pages inside the control scope - in large memory systems where the "gravity" of (1) for pulling the dirty pages to setpoint is too weak, (2) can back (1) up and drive dirty pages to bdi_setpoint ~= setpoint reasonably fast. Unfortunately in JBOD setups, the fluctuation range of bdi threshold is related to memory size due to the interferences between disks. In this case, the bdi slope will be weighted sum of write_bw and bdi_thresh. Given equations span = x_intercept - bdi_setpoint k = df/dx = - 1 / span and the extremum values span = bdi_thresh dx = bdi_thresh we get df = - dx / span = - 1.0 That means, when bdi_dirty deviates bdi_thresh up, pos_ratio and hence task ratelimit will fluctuate by -100%. peter: use 3rd order polynomial for the global control line CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 16:04:18 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: fix possible underflow in write bandwidth calculation From 1ebf33901ecc75d9496862dceb1ef0377980587c Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Mon, 23 Mar 2015 00:08:19 -0400 2f800fbd777b ("writeback: fix dirtied pages accounting on redirty") introduced account_page_redirty() which reverts stat updates for a redirtied page, making BDI_DIRTIED no longer monotonically increasing. bdi_update_write_bandwidth() uses the delta in BDI_DIRTIED as the basis for bandwidth calculation. While unlikely, since the above patch, the newer value may be lower than the recorded past value and underflow the bandwidth calculation leading to a wild result. Fix it by subtracing min of the old and new values when calculating delta. AFAIK, there hasn't been any report of it happening but the resulting erratic behavior would be non-critical and temporary, so it's possible that the issue is happening without being reported. The risk of the fix is very low, so tagged for -stable. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Fixes: 2f800fbd777b ("writeback: fix dirtied pages accounting on redirty") Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>

2015-03-23 00:18:48 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: make bdi_has_dirty_io() take multiple bdi_writeback's into account bdi_has_dirty_io() used to only reflect whether the root wb (bdi_writeback) has dirty inodes. For cgroup writeback support, it needs to take all active wb's into account. If any wb on the bdi has dirty inodes, bdi_has_dirty_io() should return true. To achieve that, as inode_wb_list_{move|del}_locked() now keep track of the dirty state transition of each wb, the number of dirty wbs can be counted in the bdi; however, bdi is already aggregating wb->avg_write_bandwidth which can easily be guaranteed to be > 0 when there are any dirty inodes by ensuring wb->avg_write_bandwidth can't dip below 1. bdi_has_dirty_io() can simply test whether bdi->tot_write_bandwidth is zero or not. While this bumps the value of wb->avg_write_bandwidth to one when it used to be zero, this shouldn't cause any meaningful behavior difference. bdi_has_dirty_io() is made an inline function which tests whether ->tot_write_bandwidth is non-zero. Also, WARN_ON_ONCE()'s on its value are added to inode_wb_list_{move|del}_locked(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:47 -04:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: introduce smoothed global dirty limit The start of a heavy weight application (ie. KVM) may instantly knock down determine_dirtyable_memory() if the swap is not enabled or full. global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi dirty thresholds that are _much_ lower than the global/bdi dirty pages. balance_dirty_pages() will then heavily throttle all dirtiers including the light ones, until the dirty pages drop below the new dirty thresholds. During this _deep_ dirty-exceeded state, the system may appear rather unresponsive to the users. About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty threshold to heavy dirtiers than light ones, and the dirty pages will be throttled around the heavy dirtiers' dirty threshold and reasonably below the light dirtiers' dirty threshold. In this state, only the heavy dirtiers will be throttled and the dirty pages are carefully controlled to not exceed the light dirtiers' dirty threshold. However if the threshold itself suddenly drops below the number of dirty pages, the light dirtiers will get heavily throttled. So introduce global_dirty_limit for tracking the global dirty threshold with policies - follow downwards slowly - follow up in one shot global_dirty_limit can effectively mask out the impact of sudden drop of dirtyable memory. It will be used in the next patch for two new type of dirty limits. Note that the new dirty limits are not going to avoid throttling the light dirtiers, but could limit their sleep time to 200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 15:54:09 -06:00

writeback: add dirty_throttle_control->dom Currently all dirty throttle operations use global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch adds dirty_throttle_control->dom and updates functions which are directly using globabl_wb_domain to use it instead. As this makes global_update_bandwidth() a misnomer, the function is renamed to domain_update_bandwidth(). This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:28 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

writeback: introduce smoothed global dirty limit The start of a heavy weight application (ie. KVM) may instantly knock down determine_dirtyable_memory() if the swap is not enabled or full. global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi dirty thresholds that are _much_ lower than the global/bdi dirty pages. balance_dirty_pages() will then heavily throttle all dirtiers including the light ones, until the dirty pages drop below the new dirty thresholds. During this _deep_ dirty-exceeded state, the system may appear rather unresponsive to the users. About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty threshold to heavy dirtiers than light ones, and the dirty pages will be throttled around the heavy dirtiers' dirty threshold and reasonably below the light dirtiers' dirty threshold. In this state, only the heavy dirtiers will be throttled and the dirty pages are carefully controlled to not exceed the light dirtiers' dirty threshold. However if the threshold itself suddenly drops below the number of dirty pages, the light dirtiers will get heavily throttled. So introduce global_dirty_limit for tracking the global dirty threshold with policies - follow downwards slowly - follow up in one shot global_dirty_limit can effectively mask out the impact of sudden drop of dirtyable memory. It will be used in the next patch for two new type of dirty limits. Note that the new dirty limits are not going to avoid throttling the light dirtiers, but could limit their sleep time to 200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 15:54:09 -06:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

writeback: introduce smoothed global dirty limit The start of a heavy weight application (ie. KVM) may instantly knock down determine_dirtyable_memory() if the swap is not enabled or full. global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi dirty thresholds that are _much_ lower than the global/bdi dirty pages. balance_dirty_pages() will then heavily throttle all dirtiers including the light ones, until the dirty pages drop below the new dirty thresholds. During this _deep_ dirty-exceeded state, the system may appear rather unresponsive to the users. About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty threshold to heavy dirtiers than light ones, and the dirty pages will be throttled around the heavy dirtiers' dirty threshold and reasonably below the light dirtiers' dirty threshold. In this state, only the heavy dirtiers will be throttled and the dirty pages are carefully controlled to not exceed the light dirtiers' dirty threshold. However if the threshold itself suddenly drops below the number of dirty pages, the light dirtiers will get heavily throttled. So introduce global_dirty_limit for tracking the global dirty threshold with policies - follow downwards slowly - follow up in one shot global_dirty_limit can effectively mask out the impact of sudden drop of dirtyable memory. It will be used in the next patch for two new type of dirty limits. Note that the new dirty limits are not going to avoid throttling the light dirtiers, but could limit their sleep time to 200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 15:54:09 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: introduce smoothed global dirty limit The start of a heavy weight application (ie. KVM) may instantly knock down determine_dirtyable_memory() if the swap is not enabled or full. global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi dirty thresholds that are _much_ lower than the global/bdi dirty pages. balance_dirty_pages() will then heavily throttle all dirtiers including the light ones, until the dirty pages drop below the new dirty thresholds. During this _deep_ dirty-exceeded state, the system may appear rather unresponsive to the users. About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty threshold to heavy dirtiers than light ones, and the dirty pages will be throttled around the heavy dirtiers' dirty threshold and reasonably below the light dirtiers' dirty threshold. In this state, only the heavy dirtiers will be throttled and the dirty pages are carefully controlled to not exceed the light dirtiers' dirty threshold. However if the threshold itself suddenly drops below the number of dirty pages, the light dirtiers will get heavily throttled. So introduce global_dirty_limit for tracking the global dirty threshold with policies - follow downwards slowly - follow up in one shot global_dirty_limit can effectively mask out the impact of sudden drop of dirtyable memory. It will be used in the next patch for two new type of dirty limits. Note that the new dirty limits are not going to avoid throttling the light dirtiers, but could limit their sleep time to 200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 15:54:09 -06:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

writeback: introduce smoothed global dirty limit The start of a heavy weight application (ie. KVM) may instantly knock down determine_dirtyable_memory() if the swap is not enabled or full. global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi dirty thresholds that are _much_ lower than the global/bdi dirty pages. balance_dirty_pages() will then heavily throttle all dirtiers including the light ones, until the dirty pages drop below the new dirty thresholds. During this _deep_ dirty-exceeded state, the system may appear rather unresponsive to the users. About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty threshold to heavy dirtiers than light ones, and the dirty pages will be throttled around the heavy dirtiers' dirty threshold and reasonably below the light dirtiers' dirty threshold. In this state, only the heavy dirtiers will be throttled and the dirty pages are carefully controlled to not exceed the light dirtiers' dirty threshold. However if the threshold itself suddenly drops below the number of dirty pages, the light dirtiers will get heavily throttled. So introduce global_dirty_limit for tracking the global dirty threshold with policies - follow downwards slowly - follow up in one shot global_dirty_limit can effectively mask out the impact of sudden drop of dirtyable memory. It will be used in the next patch for two new type of dirty limits. Note that the new dirty limits are not going to avoid throttling the light dirtiers, but could limit their sleep time to 200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 15:54:09 -06:00

writeback: add dirty_throttle_control->dom Currently all dirty throttle operations use global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch adds dirty_throttle_control->dom and updates functions which are directly using globabl_wb_domain to use it instead. As this makes global_update_bandwidth() a misnomer, the function is renamed to domain_update_bandwidth(). This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:28 -04:00

writeback: introduce smoothed global dirty limit The start of a heavy weight application (ie. KVM) may instantly knock down determine_dirtyable_memory() if the swap is not enabled or full. global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi dirty thresholds that are _much_ lower than the global/bdi dirty pages. balance_dirty_pages() will then heavily throttle all dirtiers including the light ones, until the dirty pages drop below the new dirty thresholds. During this _deep_ dirty-exceeded state, the system may appear rather unresponsive to the users. About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty threshold to heavy dirtiers than light ones, and the dirty pages will be throttled around the heavy dirtiers' dirty threshold and reasonably below the light dirtiers' dirty threshold. In this state, only the heavy dirtiers will be throttled and the dirty pages are carefully controlled to not exceed the light dirtiers' dirty threshold. However if the threshold itself suddenly drops below the number of dirty pages, the light dirtiers will get heavily throttled. So introduce global_dirty_limit for tracking the global dirty threshold with policies - follow downwards slowly - follow up in one shot global_dirty_limit can effectively mask out the impact of sudden drop of dirtyable memory. It will be used in the next patch for two new type of dirty limits. Note that the new dirty limits are not going to avoid throttling the light dirtiers, but could limit their sleep time to 200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 15:54:09 -06:00

writeback: add dirty_throttle_control->dom Currently all dirty throttle operations use global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch adds dirty_throttle_control->dom and updates functions which are directly using globabl_wb_domain to use it instead. As this makes global_update_bandwidth() a misnomer, the function is renamed to domain_update_bandwidth(). This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:28 -04:00

writeback: introduce smoothed global dirty limit The start of a heavy weight application (ie. KVM) may instantly knock down determine_dirtyable_memory() if the swap is not enabled or full. global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi dirty thresholds that are _much_ lower than the global/bdi dirty pages. balance_dirty_pages() will then heavily throttle all dirtiers including the light ones, until the dirty pages drop below the new dirty thresholds. During this _deep_ dirty-exceeded state, the system may appear rather unresponsive to the users. About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty threshold to heavy dirtiers than light ones, and the dirty pages will be throttled around the heavy dirtiers' dirty threshold and reasonably below the light dirtiers' dirty threshold. In this state, only the heavy dirtiers will be throttled and the dirty pages are carefully controlled to not exceed the light dirtiers' dirty threshold. However if the threshold itself suddenly drops below the number of dirty pages, the light dirtiers will get heavily throttled. So introduce global_dirty_limit for tracking the global dirty threshold with policies - follow downwards slowly - follow up in one shot global_dirty_limit can effectively mask out the impact of sudden drop of dirtyable memory. It will be used in the next patch for two new type of dirty limits. Note that the new dirty limits are not going to avoid throttling the light dirtiers, but could limit their sleep time to 200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 15:54:09 -06:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

writeback: introduce smoothed global dirty limit The start of a heavy weight application (ie. KVM) may instantly knock down determine_dirtyable_memory() if the swap is not enabled or full. global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi dirty thresholds that are _much_ lower than the global/bdi dirty pages. balance_dirty_pages() will then heavily throttle all dirtiers including the light ones, until the dirty pages drop below the new dirty thresholds. During this _deep_ dirty-exceeded state, the system may appear rather unresponsive to the users. About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty threshold to heavy dirtiers than light ones, and the dirty pages will be throttled around the heavy dirtiers' dirty threshold and reasonably below the light dirtiers' dirty threshold. In this state, only the heavy dirtiers will be throttled and the dirty pages are carefully controlled to not exceed the light dirtiers' dirty threshold. However if the threshold itself suddenly drops below the number of dirty pages, the light dirtiers will get heavily throttled. So introduce global_dirty_limit for tracking the global dirty threshold with policies - follow downwards slowly - follow up in one shot global_dirty_limit can effectively mask out the impact of sudden drop of dirtyable memory. It will be used in the next patch for two new type of dirty limits. Note that the new dirty limits are not going to avoid throttling the light dirtiers, but could limit their sleep time to 200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 15:54:09 -06:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

writeback: introduce smoothed global dirty limit The start of a heavy weight application (ie. KVM) may instantly knock down determine_dirtyable_memory() if the swap is not enabled or full. global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi dirty thresholds that are _much_ lower than the global/bdi dirty pages. balance_dirty_pages() will then heavily throttle all dirtiers including the light ones, until the dirty pages drop below the new dirty thresholds. During this _deep_ dirty-exceeded state, the system may appear rather unresponsive to the users. About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty threshold to heavy dirtiers than light ones, and the dirty pages will be throttled around the heavy dirtiers' dirty threshold and reasonably below the light dirtiers' dirty threshold. In this state, only the heavy dirtiers will be throttled and the dirty pages are carefully controlled to not exceed the light dirtiers' dirty threshold. However if the threshold itself suddenly drops below the number of dirty pages, the light dirtiers will get heavily throttled. So introduce global_dirty_limit for tracking the global dirty threshold with policies - follow downwards slowly - follow up in one shot global_dirty_limit can effectively mask out the impact of sudden drop of dirtyable memory. It will be used in the next patch for two new type of dirty limits. Note that the new dirty limits are not going to avoid throttling the light dirtiers, but could limit their sleep time to 200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 15:54:09 -06:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

writeback: introduce smoothed global dirty limit The start of a heavy weight application (ie. KVM) may instantly knock down determine_dirtyable_memory() if the swap is not enabled or full. global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi dirty thresholds that are _much_ lower than the global/bdi dirty pages. balance_dirty_pages() will then heavily throttle all dirtiers including the light ones, until the dirty pages drop below the new dirty thresholds. During this _deep_ dirty-exceeded state, the system may appear rather unresponsive to the users. About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty threshold to heavy dirtiers than light ones, and the dirty pages will be throttled around the heavy dirtiers' dirty threshold and reasonably below the light dirtiers' dirty threshold. In this state, only the heavy dirtiers will be throttled and the dirty pages are carefully controlled to not exceed the light dirtiers' dirty threshold. However if the threshold itself suddenly drops below the number of dirty pages, the light dirtiers will get heavily throttled. So introduce global_dirty_limit for tracking the global dirty threshold with policies - follow downwards slowly - follow up in one shot global_dirty_limit can effectively mask out the impact of sudden drop of dirtyable memory. It will be used in the next patch for two new type of dirty limits. Note that the new dirty limits are not going to avoid throttling the light dirtiers, but could limit their sleep time to 200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 15:54:09 -06:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: make __wb_writeout_inc() and hard_dirty_limit() take wb_domaas a parameter Currently __wb_writeout_inc() and hard_dirty_limit() assume global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain-specific part of __wb_writeout_inc() into wb_domain_writeout_inc() which takes wb_domain as a parameter and adds the parameter to hard_dirty_limit(). This will allow these two functions to handle per-memcg wb_domains. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:29 -04:00

2011-08-26 15:53:24 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

2011-08-26 15:53:24 -06:00

mm/page-writeback: fix dirty_ratelimit calculation Calculation of dirty_ratelimit sometimes is not correct. E.g. initial values of dirty_ratelimit == INIT_BW and step == 0, lead to the following result: UBSAN: Undefined behaviour in ../mm/page-writeback.c:1286:7 shift exponent 25600 is too large for 64-bit type 'long unsigned int' The fix is straightforward - make step 0 if the shift exponent is too big. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:55:27 -07:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

writeback: add dirty_throttle_control->pos_ratio wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:26 -04:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

writeback: balanced_rate cannot exceed write bandwidth Add an upper limit to balanced_rate according to the below inequality. This filters out some rare but huge singular points, which at least enables more readable gnuplot figures. When there are N dd dirtiers, balanced_dirty_ratelimit = write_bw / N So it holds that balanced_dirty_ratelimit <= write_bw The singular points originate from dirty_rate in the below formular: balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate where dirty_rate = (number of page dirties in the past 200ms) / 200ms In the extreme case, if all dd tasks suddenly get blocked on something else and hence no pages are dirtied at all, dirty_rate will be 0 and balanced_dirty_ratelimit will be inf. This could happen in reality. Note that these huge singular points are not a real threat, since they are _guaranteed_ to be filtered out by the min(balanced_dirty_ratelimit, task_ratelimit) line in bdi_update_dirty_ratelimit(). task_ratelimit is based on the number of dirty pages, which will never _suddenly_ fly away like balanced_dirty_ratelimit. So any weirdly large balanced_dirty_ratelimit will be cut down to the level of task_ratelimit. There won't be tiny singular points though, as long as the dirty pages lie inside the dirty throttling region (above the freerun region). Because there the dd tasks will be throttled by balanced_dirty_pages() and won't be able to suddenly dirty much more pages than average. Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-08-03 14:30:36 -06:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

2011-08-26 15:53:24 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

2011-08-26 15:53:24 -06:00

writeback: Fix some comment errors Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-06-09 11:10:55 +08:00

2011-08-26 15:53:24 -06:00

writeback: Fix some comment errors Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

2012-06-09 11:10:55 +08:00

2011-08-26 15:53:24 -06:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: add dirty_throttle_control->wb_bg_thresh wb_bg_thresh is currently treated as a second-class citizen. It's only used when BDI_CAP_STRICTLIMIT is set and balance_dirty_pages() doesn't calculate it unless the cap is set. When the cap is set, the calculated value is not passed around but instead recalculated whenever it's used. wb_position_ratio() calculates it by scaling wb_thresh proportional to bg_thresh / thresh. wb_update_dirty_ratelimit() uses wb_dirty_limit() on bg_thresh, which should generally lead to a similar result as the proportional scaling but can also be way off in the presence of max/min_ratio settings. Avoiding wb_bg_thresh calculation saves us one u64 multiplication and divsion when BDI_CAP_STRICTLIMIT is not set. Given that balance_dirty_pages() is already ratelimited, this doesn't justify the incurred extra complexity. This patch adds wb_bg_thresh to dirty_throttle_control and makes wb_dirty_limits() always calculate it and updates the users to use the pre-calculated value. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:24 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: add dirty_throttle_control->wb_bg_thresh wb_bg_thresh is currently treated as a second-class citizen. It's only used when BDI_CAP_STRICTLIMIT is set and balance_dirty_pages() doesn't calculate it unless the cap is set. When the cap is set, the calculated value is not passed around but instead recalculated whenever it's used. wb_position_ratio() calculates it by scaling wb_thresh proportional to bg_thresh / thresh. wb_update_dirty_ratelimit() uses wb_dirty_limit() on bg_thresh, which should generally lead to a similar result as the proportional scaling but can also be way off in the presence of max/min_ratio settings. Avoiding wb_bg_thresh calculation saves us one u64 multiplication and divsion when BDI_CAP_STRICTLIMIT is not set. Given that balance_dirty_pages() is already ratelimited, this doesn't justify the incurred extra complexity. This patch adds wb_bg_thresh to dirty_throttle_control and makes wb_dirty_limits() always calculate it and updates the users to use the pre-calculated value. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:24 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

2011-08-26 15:53:24 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

mm/page-writeback.c: use min3/max3 macros to avoid shadow warnings Nested calls to min/max functions result in shadow warnings in W=2 builds. Avoid the warning by using the min3 and max3 macros to get the min/max of 3 values instead of nested calls. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-10-09 15:28:15 -07:00

2011-08-26 15:53:24 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

mm/page-writeback.c: use min3/max3 macros to avoid shadow warnings Nested calls to min/max functions result in shadow warnings in W=2 builds. Avoid the warning by using the min3 and max3 macros to get the min/max of 3 values instead of nested calls. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-10-09 15:28:15 -07:00

2011-08-26 15:53:24 -06:00

mm/page-writeback: fix dirty_ratelimit calculation Calculation of dirty_ratelimit sometimes is not correct. E.g. initial values of dirty_ratelimit == INIT_BW and step == 0, lead to the following result: UBSAN: Undefined behaviour in ../mm/page-writeback.c:1286:7 shift exponent 25600 is too large for 64-bit type 'long unsigned int' The fix is straightforward - make step 0 if the shift exponent is too big. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:55:27 -07:00

2011-08-26 15:53:24 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: trace event bdi_dirty_ratelimit It helps understand how various throttle bandwidths are updated. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-03-02 17:22:49 -06:00

writeback: update writeback tracepoints to report cgroup The following tracepoints are updated to report the cgroup used during cgroup writeback. * writeback_write_inode[_start] * writeback_queue * writeback_exec * writeback_start * writeback_written * writeback_wait * writeback_nowork * writeback_wake_background * wbc_writepage * writeback_queue_io * bdi_dirty_ratelimit * balance_dirty_pages * writeback_sb_inodes_requeue * writeback_single_inode[_start] Note that writeback_bdi_register is separated out from writeback_class as reporting cgroup doesn't make sense to it. Tracepoints which take bdi are updated to take bdi_writeback instead. Signed-off-by: Tejun Heo <tj@kernel.org> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-08-18 14:54:56 -07:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

2015-05-22 18:23:20 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

2015-05-22 18:23:20 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

2015-05-22 18:23:20 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: dirty rate control It's all about bdi->dirty_ratelimit, which aims to be (write_bw / N) when there are N dd tasks. On write() syscall, use bdi->dirty_ratelimit ============================================ balance_dirty_pages(pages_dirtied) { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); pause = pages_dirtied / task_ratelimit; sleep(pause); } On every 200ms, update bdi->dirty_ratelimit =========================================== bdi_update_dirty_ratelimit() { task_ratelimit = bdi->dirty_ratelimit * bdi_position_ratio(); balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate; bdi->dirty_ratelimit = balanced_dirty_ratelimit } Estimation of balanced bdi->dirty_ratelimit =========================================== balanced task_ratelimit ----------------------- balance_dirty_pages() needs to throttle tasks dirtying pages such that the total amount of dirty pages stays below the specified dirty limit in order to avoid memory deadlocks. Furthermore we desire fairness in that tasks get throttled proportionally to the amount of pages they dirty. IOW we want to throttle tasks such that we match the dirty rate to the writeout bandwidth, this yields a stable amount of dirty pages: dirty_rate == write_bw (1) The fairness requirement gives us: task_ratelimit = balanced_dirty_ratelimit == write_bw / N (2) where N is the number of dd tasks. We don't know N beforehand, but still can estimate balanced_dirty_ratelimit within 200ms. Start by throttling each dd task at rate task_ratelimit = task_ratelimit_0 (3) (any non-zero initial value is OK) After 200ms, we measured dirty_rate = # of pages dirtied by all dd's / 200ms write_bw = # of pages written to the disk / 200ms For the aggressive dd dirtiers, the equality holds dirty_rate == N * task_rate == N * task_ratelimit_0 (4) Or task_ratelimit_0 == dirty_rate / N (5) Now we conclude that the balanced task ratelimit can be estimated by write_bw balanced_dirty_ratelimit = task_ratelimit_0 * ---------- (6) dirty_rate Because with (4) and (5) we can get the desired equality (1): write_bw balanced_dirty_ratelimit == (dirty_rate / N) * ---------- dirty_rate == write_bw / N Then using the balanced task ratelimit we can compute task pause times like: task_pause = task->nr_dirtied / task_ratelimit task_ratelimit with position control ------------------------------------ However, while the above gives us means of matching the dirty rate to the writeout bandwidth, it at best provides us with a stable dirty page count (assuming a static system). In order to control the dirty page count such that it is high enough to provide performance, but does not exceed the specified limit we need another control. The dirty position control works by extending (2) to task_ratelimit = balanced_dirty_ratelimit * pos_ratio (7) where pos_ratio is a negative feedback function that subjects to 1) f(setpoint) = 1.0 2) df/dx < 0 That is, if the dirty pages are ABOVE the setpoint, we throttle each task a bit more HEAVY than balanced_dirty_ratelimit, so that the dirty pages are created less fast than they are cleaned, thus DROP to the setpoints (and the reverse). Based on (7) and the assumption that both dirty_ratelimit and pos_ratio remains CONSTANT for the past 200ms, we get task_ratelimit_0 = balanced_dirty_ratelimit * pos_ratio (8) Putting (8) into (6), we get the formula used in bdi_update_dirty_ratelimit(): write_bw balanced_dirty_ratelimit *= pos_ratio * ---------- (9) dirty_rate Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-12 10:51:31 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

2015-05-22 18:23:20 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

writeback: remove nr_pages_dirtied arg from balance_dirty_pages_ratelimited_nr() There is no reason to pass the nr_pages_dirtied argument, because nr_pages_dirtied value from the caller is unused in balance_dirty_pages_ratelimited_nr(). Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-12-11 16:00:21 -08:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

mm: rename global_page_state to global_zone_page_state global_page_state is error prone as a recent bug report pointed out [1]. It only returns proper values for zone based counters as the enum it gets suggests. We already have global_node_page_state so let's rename global_page_state to global_zone_page_state to be more explicit here. All existing users seems to be correct: $ git grep "global_page_state(NR_" | sed 's@.*($NR_[A-Z_]*$).*@\1@' | sort | uniq -c 2 NR_BOUNCE 2 NR_FREE_CMA_PAGES 11 NR_FREE_PAGES 1 NR_KERNEL_STACK_KB 1 NR_MLOCK 2 NR_PAGETABLE This patch shouldn't introduce any functional change. [1] http://lkml.kernel.org/r/201707260628.v6Q6SmaS030814@www262.sakura.ne.jp Link: http://lkml.kernel.org/r/20170801134256.5400-2-hannes@cmpxchg.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-09-06 16:23:36 -07:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: fix negative bdi max pause Toralf runs trinity on UML/i386. After some time it hangs and the last message line is BUG: soft lockup - CPU#0 stuck for 22s! [trinity-child0:1521] It's found that pages_dirtied becomes very large. More than 1000000000 pages in this case: period = HZ * pages_dirtied / task_ratelimit; BUG_ON(pages_dirtied > 2000000000); BUG_ON(pages_dirtied > 1000000000); <--------- UML debug printf shows that we got negative pause here: ick: pause : -984 ick: pages_dirtied : 0 ick: task_ratelimit: 0 pause: + if (pause < 0) { + extern int printf(char *, ...); + printf("ick : pause : %li\n", pause); + printf("ick: pages_dirtied : %lu\n", pages_dirtied); + printf("ick: task_ratelimit: %lu\n", task_ratelimit); + BUG_ON(1); + } trace_balance_dirty_pages(bdi, Since pause is bounded by [min_pause, max_pause] where min_pause is also bounded by max_pause. It's suspected and demonstrated that the max_pause calculation goes wrong: ick: pause : -717 ick: min_pause : -177 ick: max_pause : -717 ick: pages_dirtied : 14 ick: task_ratelimit: 0 The problem lies in the two "long = unsigned long" assignments in bdi_max_pause() which might go negative if the highest bit is 1, and the min_t(long, ...) check failed to protect it falling under 0. Fix all of them by using "unsigned long" throughout the function. Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Toralf Förster <toralf.foerster@gmx.de> Tested-by: Toralf Förster <toralf.foerster@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Richard Weinberger <richard@nod.at> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-10-16 13:47:03 -07:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: fix negative bdi max pause Toralf runs trinity on UML/i386. After some time it hangs and the last message line is BUG: soft lockup - CPU#0 stuck for 22s! [trinity-child0:1521] It's found that pages_dirtied becomes very large. More than 1000000000 pages in this case: period = HZ * pages_dirtied / task_ratelimit; BUG_ON(pages_dirtied > 2000000000); BUG_ON(pages_dirtied > 1000000000); <--------- UML debug printf shows that we got negative pause here: ick: pause : -984 ick: pages_dirtied : 0 ick: task_ratelimit: 0 pause: + if (pause < 0) { + extern int printf(char *, ...); + printf("ick : pause : %li\n", pause); + printf("ick: pages_dirtied : %lu\n", pages_dirtied); + printf("ick: task_ratelimit: %lu\n", task_ratelimit); + BUG_ON(1); + } trace_balance_dirty_pages(bdi, Since pause is bounded by [min_pause, max_pause] where min_pause is also bounded by max_pause. It's suspected and demonstrated that the max_pause calculation goes wrong: ick: pause : -717 ick: min_pause : -177 ick: max_pause : -717 ick: pages_dirtied : 14 ick: task_ratelimit: 0 The problem lies in the two "long = unsigned long" assignments in bdi_max_pause() which might go negative if the highest bit is 1, and the min_t(long, ...) check failed to protect it falling under 0. Fix all of them by using "unsigned long" throughout the function. Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Toralf Förster <toralf.foerster@gmx.de> Tested-by: Toralf Förster <toralf.foerster@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Richard Weinberger <richard@nod.at> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-10-16 13:47:03 -07:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: avoid tiny dirty poll intervals The LKP tests see big 56% regression for the case fio_mmap_randwrite_64k. Shaohua manages to root cause it to be the much smaller dirty pause times and hence much more frequent invocations to the IO-less balance_dirty_pages(). Since fio_mmap_randwrite_64k effectively contains both reads and writes, the more frequent pauses triggered more idling in the cfq IO scheduler. The solution is to increase pause time all the way up to the max 200ms in this case, which is found to restore most performance. This will help reduce CPU overheads in other cases, too. Note that I don't expect many performance critical workloads to run this access pattern: the mmap read-on-write is rather inefficient and could be avoided by doing normal writes syscalls. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: Li Shaohua <shaohua.li@intel.com> Tested-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-12-06 13:17:17 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: avoid tiny dirty poll intervals The LKP tests see big 56% regression for the case fio_mmap_randwrite_64k. Shaohua manages to root cause it to be the much smaller dirty pause times and hence much more frequent invocations to the IO-less balance_dirty_pages(). Since fio_mmap_randwrite_64k effectively contains both reads and writes, the more frequent pauses triggered more idling in the cfq IO scheduler. The solution is to increase pause time all the way up to the max 200ms in this case, which is found to restore most performance. This will help reduce CPU overheads in other cases, too. Note that I don't expect many performance critical workloads to run this access pattern: the mmap read-on-write is rather inefficient and could be avoided by doing normal writes syscalls. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: Li Shaohua <shaohua.li@intel.com> Tested-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-12-06 13:17:17 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: avoid tiny dirty poll intervals The LKP tests see big 56% regression for the case fio_mmap_randwrite_64k. Shaohua manages to root cause it to be the much smaller dirty pause times and hence much more frequent invocations to the IO-less balance_dirty_pages(). Since fio_mmap_randwrite_64k effectively contains both reads and writes, the more frequent pauses triggered more idling in the cfq IO scheduler. The solution is to increase pause time all the way up to the max 200ms in this case, which is found to restore most performance. This will help reduce CPU overheads in other cases, too. Note that I don't expect many performance critical workloads to run this access pattern: the mmap read-on-write is rather inefficient and could be avoided by doing normal writes syscalls. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: Li Shaohua <shaohua.li@intel.com> Tested-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-12-06 13:17:17 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

writeback: add dirty_throttle_control->wb_bg_thresh wb_bg_thresh is currently treated as a second-class citizen. It's only used when BDI_CAP_STRICTLIMIT is set and balance_dirty_pages() doesn't calculate it unless the cap is set. When the cap is set, the calculated value is not passed around but instead recalculated whenever it's used. wb_position_ratio() calculates it by scaling wb_thresh proportional to bg_thresh / thresh. wb_update_dirty_ratelimit() uses wb_dirty_limit() on bg_thresh, which should generally lead to a similar result as the proportional scaling but can also be way off in the presence of max/min_ratio settings. Avoiding wb_bg_thresh calculation saves us one u64 multiplication and divsion when BDI_CAP_STRICTLIMIT is not set. Given that balance_dirty_pages() is already ratelimited, this doesn't justify the incurred extra complexity. This patch adds wb_bg_thresh to dirty_throttle_control and makes wb_dirty_limits() always calculate it and updates the users to use the pre-calculated value. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:24 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: move backing_dev_info->bdi_stat[] into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bdi->bdi_stat[] into wb. * enum bdi_stat_item is renamed to wb_stat_item and the prefix of all enums is changed from BDI_ to WB_. * BDI_STAT_BATCH() -> WB_STAT_BATCH() * [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...) * bdi_stat[_error]() -> wb_stat[_error]() * bdi_writeout_inc() -> wb_writeout_inc() * stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and frees stat. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:27 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: make __wb_calc_thresh() take dirty_throttle_control wb_calc_thresh() calculates wb_thresh by scaling thresh according to the wb's portion in the system-wide write bandwidth. cgroup writeback support would need to calculate wb_thresh against memcg domain too. This patch renames wb_calc_thresh() to __wb_calc_thresh() and makes it take dirty_throttle_control so that the function can later be updated to calculate against different domains according to dirty_throttle_control. wb_calc_thresh() is now a thin wrapper around __wb_calc_thresh(). v2: The original version was incorrectly scaling dtc->dirty instead of dtc->thresh. This was due to the extremely confusing function and variable names. Added a rename patch and fixed this one. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:25 -04:00

writeback: add dirty_throttle_control->wb_bg_thresh wb_bg_thresh is currently treated as a second-class citizen. It's only used when BDI_CAP_STRICTLIMIT is set and balance_dirty_pages() doesn't calculate it unless the cap is set. When the cap is set, the calculated value is not passed around but instead recalculated whenever it's used. wb_position_ratio() calculates it by scaling wb_thresh proportional to bg_thresh / thresh. wb_update_dirty_ratelimit() uses wb_dirty_limit() on bg_thresh, which should generally lead to a similar result as the proportional scaling but can also be way off in the presence of max/min_ratio settings. Avoiding wb_bg_thresh calculation saves us one u64 multiplication and divsion when BDI_CAP_STRICTLIMIT is not set. Given that balance_dirty_pages() is already ratelimited, this doesn't justify the incurred extra complexity. This patch adds wb_bg_thresh to dirty_throttle_control and makes wb_dirty_limits() always calculate it and updates the users to use the pre-calculated value. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:24 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: remove unused function parameter The parameter `struct bdi_writeback *wb` is not been used in the function body. Remove it. Link: http://lkml.kernel.org/r/1509685485-15278-1-git-send-email-wanglong19@meituan.com Signed-off-by: Wang Long <wanglong19@meituan.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-15 17:39:03 -08:00

writeback: move backing_dev_info->bdi_stat[] into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bdi->bdi_stat[] into wb. * enum bdi_stat_item is renamed to wb_stat_item and the prefix of all enums is changed from BDI_ to WB_. * BDI_STAT_BATCH() -> WB_STAT_BATCH() * [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...) * bdi_stat[_error]() -> wb_stat[_error]() * bdi_writeout_inc() -> wb_writeout_inc() * stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and frees stat. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:27 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: move backing_dev_info->bdi_stat[] into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bdi->bdi_stat[] into wb. * enum bdi_stat_item is renamed to wb_stat_item and the prefix of all enums is changed from BDI_ to WB_. * BDI_STAT_BATCH() -> WB_STAT_BATCH() * [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...) * bdi_stat[_error]() -> wb_stat[_error]() * bdi_writeout_inc() -> wb_writeout_inc() * stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and frees stat. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:27 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

2010-08-27 18:45:12 -06:00

writeback: get rid to incorrect references to pdflush in comments Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2009-09-23 19:37:09 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm/page-writeback.c: remove unused parameter from balance_dirty_pages() "mapping" parameter to balance_dirty_pages() is not used anymore. Fixes: dfb8ae567835 ("writeback: let balance_dirty_pages() work on the matching cgroup bdi_writeback") Link: http://lkml.kernel.org/r/20170927221311.23263-1-tahsin@google.com Signed-off-by: Tahsin Erdogan <tahsin@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-15 17:33:19 -08:00

2010-08-27 18:45:12 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

2010-08-27 18:45:12 -06:00

writeback: dirty ratelimit - think time compensation Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:25:42 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: balance_dirty_pages(): reduce calls to global_page_state Reducing the number of times balance_dirty_pages calls global_page_state reduces the cache references and so improves write performance on a variety of workloads. 'perf stats' of simple fio write tests shows the reduction in cache access. Where the test is fio 'write,mmap,600Mb,pre_read' on AMD AthlonX2 with 3Gb memory (dirty_threshold approx 600 Mb) running each test 10 times, dropping the fasted & slowest values then taking the average & standard deviation average (s.d.) in millions (10^6) 2.6.31-rc8 648.6 (14.6) +patch 620.1 (16.5) Achieving this reduction is by dropping clip_bdi_dirty_limit as it rereads the counters to apply the dirty_threshold and moving this check up into balance_dirty_pages where it has already read the counters. Also by rearrange the for loop to only contain one copy of the limit tests allows the pdflush test after the loop to use the local copies of the counters rather than rereading them. In the common case with no throttling it now calls global_page_state 5 fewer times and bdi_stat 2 fewer. Fengguang: This patch slightly changes behavior by replacing clip_bdi_dirty_limit() with the explicit check (nr_reclaimable + nr_writeback >= dirty_thresh) to avoid exceeding the dirty limit. Since the bdi dirty limit is mostly accurate we don't need to do routinely clip. A simple dirty limit check would be enough. The check is necessary because, in principle we should throttle everything calling balance_dirty_pages() when we're over the total limit, as said by Peter. We now set and clear dirty_exceeded not only based on bdi dirty limits, but also on the global dirty limit. The global limit check is added in place of clip_bdi_dirty_limit() for safety and not intended as a behavior change. The bdi limits should be tight enough to keep all dirty pages under the global limit at most time; occasional small exceeding should be OK though. The change makes the logic more obvious: the global limit is the ultimate goal and shall be always imposed. We may now start background writeback work based on outdated conditions. That's safe because the bdi flush thread will (and have to) double check the states. It reduces overall overheads because the test based on old states still have good chance to be right. [akpm@linux-foundation.org] fix uninitialized dirty_exceeded Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:37 -07:00

2010-08-27 18:45:12 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: let balance_dirty_pages() work on the matching cgroup bdi_writeback Currently, balance_dirty_pages() always work on bdi->wb. This patch updates it to work on the wb (bdi_writeback) matching memcg and blkcg of the current task as that's what the inode is being dirtied against. balance_dirty_pages_ratelimited() now pins the current wb and passes it to balance_dirty_pages(). As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:40 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: dirty ratelimit - think time compensation Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:25:42 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

mm/page-writeback.c: initialize m_dirty to avoid compile warning When building kernel with gcc 5.2, the below warning is raised: mm/page-writeback.c: In function 'balance_dirty_pages.isra.10': mm/page-writeback.c:1545:17: warning: 'm_dirty' may be used uninitialized in this function [-Wmaybe-uninitialized] unsigned long m_dirty, m_thresh, m_bg_thresh; The m_dirty{thresh, bg_thresh} are initialized in the block of "if (mdtc)", so if mdts is null, they won't be initialized before being used. Initialize m_dirty to zero, also initialize m_thresh and m_bg_thresh to keep consistency. They are used later by if condition: !mdtc || m_dirty <= dirty_freerun_ceiling(m_thresh, m_bg_thresh) If mdtc is null, dirty_freerun_ceiling will not be called at all, so the initialization will not change any behavior other than just ceasing the compile warning. (akpm: the patch actually reduces .text size by ~20 bytes on gcc-4.x.y) [akpm@linux-foundation.org: add comment] Signed-off-by: Yang Shi <yang.shi@linaro.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-11-20 15:57:10 -08:00

writeback: dirty ratelimit - think time compensation Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:25:42 -06:00

2010-08-27 18:45:12 -06:00

mm: move most file-based accounting to the node There are now a number of accounting oddities such as mapped file pages being accounted for on the node while the total number of file pages are accounted on the zone. This can be coped with to some extent but it's confusing so this patch moves the relevant file-based accounted. Due to throttling logic in the page allocator for reliable OOM detection, it is still necessary to track dirty and writeback pages on a per-zone basis. [mgorman@techsingularity.net: fix NR_ZONE_WRITE_PENDING accounting] Link: http://lkml.kernel.org/r/1468404004-5085-5-git-send-email-mgorman@techsingularity.net Link: http://lkml.kernel.org/r/1467970510-21195-20-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:20 -07:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

mm: move most file-based accounting to the node There are now a number of accounting oddities such as mapped file pages being accounted for on the node while the total number of file pages are accounted on the zone. This can be coped with to some extent but it's confusing so this patch moves the relevant file-based accounted. Due to throttling logic in the page allocator for reliable OOM detection, it is still necessary to track dirty and writeback pages on a per-zone basis. [mgorman@techsingularity.net: fix NR_ZONE_WRITE_PENDING accounting] Link: http://lkml.kernel.org/r/1468404004-5085-5-git-send-email-mgorman@techsingularity.net Link: http://lkml.kernel.org/r/1467970510-21195-20-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:20 -07:00

mm: speed up writeback ramp-up on clean systems We allow violation of bdi limits if there is a lot of room on the system. Once we hit half the total limit we start enforcing bdi limits and bdi ramp-up should happen. Doing it this way avoids many small writeouts on an otherwise idle system and should also speed up the ramp-up. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-11-14 16:59:15 -08:00

writeback: separate out domain_dirty_limits() global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:30 -04:00

writeback: avoid unnecessary calculation of bdi dirty thresholds Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so that the latter can be avoided when under global dirty background threshold (which is the normal state for most systems). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:39 -07:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: add dirty_throttle_control->wb_bg_thresh wb_bg_thresh is currently treated as a second-class citizen. It's only used when BDI_CAP_STRICTLIMIT is set and balance_dirty_pages() doesn't calculate it unless the cap is set. When the cap is set, the calculated value is not passed around but instead recalculated whenever it's used. wb_position_ratio() calculates it by scaling wb_thresh proportional to bg_thresh / thresh. wb_update_dirty_ratelimit() uses wb_dirty_limit() on bg_thresh, which should generally lead to a similar result as the proportional scaling but can also be way off in the presence of max/min_ratio settings. Avoiding wb_bg_thresh calculation saves us one u64 multiplication and divsion when BDI_CAP_STRICTLIMIT is not set. Given that balance_dirty_pages() is already ratelimited, this doesn't justify the incurred extra complexity. This patch adds wb_bg_thresh to dirty_throttle_control and makes wb_dirty_limits() always calculate it and updates the users to use the pre-calculated value. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:24 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: add dirty_throttle_control->wb_bg_thresh wb_bg_thresh is currently treated as a second-class citizen. It's only used when BDI_CAP_STRICTLIMIT is set and balance_dirty_pages() doesn't calculate it unless the cap is set. When the cap is set, the calculated value is not passed around but instead recalculated whenever it's used. wb_position_ratio() calculates it by scaling wb_thresh proportional to bg_thresh / thresh. wb_update_dirty_ratelimit() uses wb_dirty_limit() on bg_thresh, which should generally lead to a similar result as the proportional scaling but can also be way off in the presence of max/min_ratio settings. Avoiding wb_bg_thresh calculation saves us one u64 multiplication and divsion when BDI_CAP_STRICTLIMIT is not set. Given that balance_dirty_pages() is already ratelimited, this doesn't justify the incurred extra complexity. This patch adds wb_bg_thresh to dirty_throttle_control and makes wb_dirty_limits() always calculate it and updates the users to use the pre-calculated value. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:24 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: fix incorrect calculation of available memory for memcg domains For memcg domains, the amount of available memory was calculated as min(the amount currently in use + headroom according to memcg, total clean memory) This isn't quite correct as what should be capped by the amount of clean memory is the headroom, not the sum of memory in use and headroom. For example, if a memcg domain has a significant amount of dirty memory, the above can lead to a value which is lower than the current amount in use which doesn't make much sense. In most circumstances, the above leads to a number which is somewhat but not drastically lower. As the amount of memory which can be readily allocated to the memcg domain is capped by the amount of system-wide clean memory which is not already assigned to the memcg itself, the number we want is the amount currently in use + min(headroom according to memcg, clean memory elsewhere in the system) This patch updates mem_cgroup_wb_stats() to return the number of filepages and headroom instead of the calculated available pages. mdtc_cap_avail() is renamed to mdtc_calc_avail() and performs the above calculation from file, headroom, dirty and globally clean pages. v2: Dummy mem_cgroup_wb_stats() implementation wasn't updated leading to build failure when !CGROUP_WRITEBACK. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c2aa723a6093 ("writeback: implement memcg writeback domain based throttling") Signed-off-by: Jens Axboe <axboe@fb.com>

2015-09-29 13:04:26 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: fix incorrect calculation of available memory for memcg domains For memcg domains, the amount of available memory was calculated as min(the amount currently in use + headroom according to memcg, total clean memory) This isn't quite correct as what should be capped by the amount of clean memory is the headroom, not the sum of memory in use and headroom. For example, if a memcg domain has a significant amount of dirty memory, the above can lead to a value which is lower than the current amount in use which doesn't make much sense. In most circumstances, the above leads to a number which is somewhat but not drastically lower. As the amount of memory which can be readily allocated to the memcg domain is capped by the amount of system-wide clean memory which is not already assigned to the memcg itself, the number we want is the amount currently in use + min(headroom according to memcg, clean memory elsewhere in the system) This patch updates mem_cgroup_wb_stats() to return the number of filepages and headroom instead of the calculated available pages. mdtc_cap_avail() is renamed to mdtc_calc_avail() and performs the above calculation from file, headroom, dirty and globally clean pages. v2: Dummy mem_cgroup_wb_stats() implementation wasn't updated leading to build failure when !CGROUP_WRITEBACK. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c2aa723a6093 ("writeback: implement memcg writeback domain based throttling") Signed-off-by: Jens Axboe <axboe@fb.com>

2015-09-29 13:04:26 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: fix incorrect calculation of available memory for memcg domains For memcg domains, the amount of available memory was calculated as min(the amount currently in use + headroom according to memcg, total clean memory) This isn't quite correct as what should be capped by the amount of clean memory is the headroom, not the sum of memory in use and headroom. For example, if a memcg domain has a significant amount of dirty memory, the above can lead to a value which is lower than the current amount in use which doesn't make much sense. In most circumstances, the above leads to a number which is somewhat but not drastically lower. As the amount of memory which can be readily allocated to the memcg domain is capped by the amount of system-wide clean memory which is not already assigned to the memcg itself, the number we want is the amount currently in use + min(headroom according to memcg, clean memory elsewhere in the system) This patch updates mem_cgroup_wb_stats() to return the number of filepages and headroom instead of the calculated available pages. mdtc_cap_avail() is renamed to mdtc_calc_avail() and performs the above calculation from file, headroom, dirty and globally clean pages. v2: Dummy mem_cgroup_wb_stats() implementation wasn't updated leading to build failure when !CGROUP_WRITEBACK. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c2aa723a6093 ("writeback: implement memcg writeback domain based throttling") Signed-off-by: Jens Axboe <axboe@fb.com>

2015-09-29 13:04:26 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: avoid unnecessary calculation of bdi dirty thresholds Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so that the latter can be avoided when under global dirty background threshold (which is the normal state for most systems). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:39 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: avoid unnecessary calculation of bdi dirty thresholds Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so that the latter can be avoided when under global dirty background threshold (which is the normal state for most systems). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:39 -07:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: dirty ratelimit - think time compensation Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:25:42 -06:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: avoid unnecessary calculation of bdi dirty thresholds Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so that the latter can be avoided when under global dirty background threshold (which is the normal state for most systems). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:39 -07:00

writeback: dirty ratelimit - think time compensation Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:25:42 -06:00

writeback: avoid unnecessary calculation of bdi dirty thresholds Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so that the latter can be avoided when under global dirty background threshold (which is the normal state for most systems). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:39 -07:00

writeback: make writeback_in_progress() take bdi_writeback instead of backing_dev_info writeback_in_progress() currently takes @bdi and returns whether writeback is in progress on its root wb (bdi_writeback). In preparation for cgroup writeback support, make it take wb instead. While at it, make it an inline function. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:53 -04:00

writeback: make bdi_start_background_writeback() take bdi_writeback instead of backing_dev_info bdi_start_background_writeback() currently takes @bdi and kicks the root wb (bdi_writeback). In preparation for cgroup writeback support, make it take wb instead. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:54 -04:00

2010-08-27 18:45:12 -06:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

mm/page-writeback.c: add strictlimit feature The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-09-11 14:22:46 -07:00

writeback: add dirty_throttle_control->wb_bg_thresh wb_bg_thresh is currently treated as a second-class citizen. It's only used when BDI_CAP_STRICTLIMIT is set and balance_dirty_pages() doesn't calculate it unless the cap is set. When the cap is set, the calculated value is not passed around but instead recalculated whenever it's used. wb_position_ratio() calculates it by scaling wb_thresh proportional to bg_thresh / thresh. wb_update_dirty_ratelimit() uses wb_dirty_limit() on bg_thresh, which should generally lead to a similar result as the proportional scaling but can also be way off in the presence of max/min_ratio settings. Avoiding wb_bg_thresh calculation saves us one u64 multiplication and divsion when BDI_CAP_STRICTLIMIT is not set. Given that balance_dirty_pages() is already ratelimited, this doesn't justify the incurred extra complexity. This patch adds wb_bg_thresh to dirty_throttle_control and makes wb_dirty_limits() always calculate it and updates the users to use the pre-calculated value. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:24 -04:00

mm: speed up writeback ramp-up on clean systems We allow violation of bdi limits if there is a lot of room on the system. Once we hit half the total limit we start enforcing bdi limits and bdi ramp-up should happen. Doing it this way avoids many small writeouts on an otherwise idle system and should also speed up the ramp-up. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-11-14 16:59:15 -08:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: add dirty_throttle_control->pos_ratio wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:26 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: add dirty_throttle_control->pos_ratio wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:26 -04:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

2015-05-22 18:23:20 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

2015-05-22 18:23:20 -04:00

writeback: bdi write bandwidth estimation The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 11:22:30 -06:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: fix uninitialized task_ratelimit In balance_dirty_pages() task_ratelimit may be not initialized (initialization skiped by goto pause), and then used when calling tracing hook. Fix it by moving the task_ratelimit assignment before goto pause. Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-07 19:19:28 +08:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: fix uninitialized task_ratelimit In balance_dirty_pages() task_ratelimit may be not initialized (initialization skiped by goto pause), and then used when calling tracing hook. Fix it by moving the task_ratelimit assignment before goto pause. Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-07 19:19:28 +08:00

writeback: dirty ratelimit - think time compensation Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:25:42 -06:00

writeback: limit max dirty pause time Apply two policies to scale down the max pause time for 1) small number of concurrent dirtiers 2) small memory system (comparing to storage bandwidth) MAX_PAUSE=200ms may only be suitable for high end servers with lots of concurrent dirtiers, where the large pause time can reduce much overheads. Otherwise, smaller pause time is desirable whenever possible, so as to get good responsiveness and smooth user experiences. It's actually required for good disk utilization in the case when all the dirty pages can be synced to disk within MAX_PAUSE=200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:21:43 -06:00

2010-08-27 18:45:12 -06:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

writeback: dirty ratelimit - think time compensation Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:25:42 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: update writeback tracepoints to report cgroup The following tracepoints are updated to report the cgroup used during cgroup writeback. * writeback_write_inode[_start] * writeback_queue * writeback_exec * writeback_start * writeback_written * writeback_wait * writeback_nowork * writeback_wake_background * wbc_writepage * writeback_queue_io * bdi_dirty_ratelimit * balance_dirty_pages * writeback_sb_inodes_requeue * writeback_single_inode[_start] Note that writeback_bdi_register is separated out from writeback_class as reporting cgroup doesn't make sense to it. Tracepoints which take bdi are updated to take bdi_writeback instead. Signed-off-by: Tejun Heo <tj@kernel.org> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-08-18 14:54:56 -07:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: trace event balance_dirty_pages Useful for analyzing the dynamics of the throttling algorithms and debugging user reported problems. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 23:33:20 -06:00

writeback: dirty ratelimit - think time compensation Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:25:42 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: trace event balance_dirty_pages Useful for analyzing the dynamics of the throttling algorithms and debugging user reported problems. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 23:33:20 -06:00

writeback: dirty ratelimit - think time compensation Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:25:42 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: control dirty pause time The dirty pause time shall ultimately be controlled by adjusting nr_dirtied_pause, since there is relationship pause = pages_dirtied / task_ratelimit Assuming pages_dirtied ~= nr_dirtied_pause task_ratelimit ~= dirty_ratelimit We get nr_dirtied_pause ~= dirty_ratelimit * desired_pause Here dirty_ratelimit is preferred over task_ratelimit because it's more stable. It's also important to limit possible large transitional errors: - bw is changing quickly - pages_dirtied << nr_dirtied_pause on entering dirty exceeded area - pages_dirtied >> nr_dirtied_pause on btrfs (to be improved by a separate fix, but still expect non-trivial errors) So we end up using the above formula inside clamp_val(). The best test case for this code is to run 100 "dd bs=4M" tasks on btrfs and check its pause time distribution. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:32:32 -06:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

2010-08-27 18:45:12 -06:00

writeback: update writeback tracepoints to report cgroup The following tracepoints are updated to report the cgroup used during cgroup writeback. * writeback_write_inode[_start] * writeback_queue * writeback_exec * writeback_start * writeback_written * writeback_wait * writeback_nowork * writeback_wake_background * wbc_writepage * writeback_queue_io * bdi_dirty_ratelimit * balance_dirty_pages * writeback_sb_inodes_requeue * writeback_single_inode[_start] Note that writeback_bdi_register is separated out from writeback_class as reporting cgroup doesn't make sense to it. Tracepoints which take bdi are updated to take bdi_writeback instead. Signed-off-by: Tejun Heo <tj@kernel.org> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-08-18 14:54:56 -07:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: trace event balance_dirty_pages Useful for analyzing the dynamics of the throttling algorithms and debugging user reported problems. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 23:33:20 -06:00

writeback: dirty ratelimit - think time compensation Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:25:42 -06:00

writeback: trace event balance_dirty_pages Useful for analyzing the dynamics of the throttling algorithms and debugging user reported problems. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-08-29 23:33:20 -06:00

mm: Make task in balance_dirty_pages() killable There is no reason why task in balance_dirty_pages() shouldn't be killable and it helps in recovering from some error conditions (like when filesystem goes in error state and cannot accept writeback anymore but we still want to kill processes using it to be able to unmount it). There will be follow up patches to further abort the generic_perform_write() and other filesystem write loops, to avoid large write + SIGKILL combination exceeding the dirty limit and possibly strange OOM. Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Tested-by: Kazuya Mio <k-mio@sx.jp.nec.com> Reviewed-by: Neil Brown <neilb@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-16 19:34:48 +08:00

writeback: track if we're sleeping on progress in balance_dirty_pages() Note in the bdi_writeback structure whenever a task ends up sleeping waiting for progress. We can use that information in the lower layers to increase the priority of writes. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Jan Kara <jack@suse.cz>

2016-09-01 10:20:33 -06:00

writeback: account IO throttling wait as iowait It makes sense to do IOWAIT when someone is blocked due to IO throttle, as suggested by Kame and Peter. There is an old comment for not doing IOWAIT on throttle, however it has been mismatching the code for a long time. If we stop accounting IOWAIT for 2.6.32, it could be an undesirable behavior change. So restore the io_schedule. CC: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2009-10-09 12:40:42 +02:00

writeback: make balance_dirty_pages() gradually back more off Currently it just sleeps for a very short time, just 1 jiffy. If we keep looping in there, continually delay for a little longer of up to 100msec in total. That was the old limit for congestion wait. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2009-09-17 19:59:14 +02:00

writeback: dirty ratelimit - think time compensation Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:25:42 -06:00

writeback: max, min and target dirty pause time Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-30 11:08:55 -06:00

writeback: dirty ratelimit - think time compensation Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 19:25:42 -06:00

writeback: introduce max-pause and pass-good dirty limits The max-pause limit helps to keep the sleep time inside balance_dirty_pages() within MAX_PAUSE=200ms. The 200ms max sleep means per task rate limit of 8pages/200ms=160KB/s when dirty exceeded, which normally is enough to stop dirtiers from continue pushing the dirty pages high, unless there are a sufficient large number of slow dirtiers (eg. 500 tasks doing 160KB/s will still sum up to 80MB/s, exceeding the write bandwidth of a slow disk and hence accumulating more and more dirty pages). The pass-good limit helps to let go of the good bdi's in the presence of a blocked bdi (ie. NFS server not responding) or slow USB disk which for some reason build up a large number of initial dirty pages that refuse to go away anytime soon. For example, given two bdi's A and B and the initial state bdi_thresh_A = dirty_thresh / 2 bdi_thresh_B = dirty_thresh / 2 bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 Then A get blocked, after a dozen seconds bdi_thresh_A = 0 bdi_thresh_B = dirty_thresh bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 The (bdi_dirty_B < bdi_thresh_B) test is now useless and the dirty pages will be effectively throttled by condition (nr_dirty < dirty_thresh). This has two problems: (1) we lose the protections for light dirtiers (2) balance_dirty_pages() effectively becomes IO-less because the (bdi_nr_reclaimable > bdi_thresh) test won't be true. This is good for IO, but balance_dirty_pages() loses an important way to break out of the loop which leads to more spread out throttle delays. DIRTY_PASSGOOD_AREA can eliminate the above issues. The only problem is, DIRTY_PASSGOOD_AREA needs to be defined as 2 to fully cover the above example while this patch uses the more conservative value 8 so as not to surprise people with too many dirty pages than expected. The max-pause limit won't noticeably impact the speed dirty pages are knocked down when there is a sudden drop of global/bdi dirty thresholds. Because the heavy dirties will be throttled below 160KB/s which is slow enough. It does help to avoid long dirty throttle delays and especially will make light dirtiers more responsive. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-19 22:18:42 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: introduce max-pause and pass-good dirty limits The max-pause limit helps to keep the sleep time inside balance_dirty_pages() within MAX_PAUSE=200ms. The 200ms max sleep means per task rate limit of 8pages/200ms=160KB/s when dirty exceeded, which normally is enough to stop dirtiers from continue pushing the dirty pages high, unless there are a sufficient large number of slow dirtiers (eg. 500 tasks doing 160KB/s will still sum up to 80MB/s, exceeding the write bandwidth of a slow disk and hence accumulating more and more dirty pages). The pass-good limit helps to let go of the good bdi's in the presence of a blocked bdi (ie. NFS server not responding) or slow USB disk which for some reason build up a large number of initial dirty pages that refuse to go away anytime soon. For example, given two bdi's A and B and the initial state bdi_thresh_A = dirty_thresh / 2 bdi_thresh_B = dirty_thresh / 2 bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 Then A get blocked, after a dozen seconds bdi_thresh_A = 0 bdi_thresh_B = dirty_thresh bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 The (bdi_dirty_B < bdi_thresh_B) test is now useless and the dirty pages will be effectively throttled by condition (nr_dirty < dirty_thresh). This has two problems: (1) we lose the protections for light dirtiers (2) balance_dirty_pages() effectively becomes IO-less because the (bdi_nr_reclaimable > bdi_thresh) test won't be true. This is good for IO, but balance_dirty_pages() loses an important way to break out of the loop which leads to more spread out throttle delays. DIRTY_PASSGOOD_AREA can eliminate the above issues. The only problem is, DIRTY_PASSGOOD_AREA needs to be defined as 2 to fully cover the above example while this patch uses the more conservative value 8 so as not to surprise people with too many dirty pages than expected. The max-pause limit won't noticeably impact the speed dirty pages are knocked down when there is a sudden drop of global/bdi dirty thresholds. Because the heavy dirties will be throttled below 160KB/s which is slow enough. It does help to avoid long dirty throttle delays and especially will make light dirtiers more responsive. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-19 22:18:42 -06:00

writeback: hard throttle 1000+ dd on a slow USB stick The sleep based balance_dirty_pages() can pause at most MAX_PAUSE=200ms on every 1 4KB-page, which means it cannot throttle a task under 4KB/200ms=20KB/s. So when there are more than 512 dd writing to a 10MB/s USB stick, its bdi dirty pages could grow out of control. Even if we can increase MAX_PAUSE, the minimal (task_ratelimit = 1) means a limit of 4KB/s. They can eventually be safeguarded by the global limit check (nr_dirty < dirty_thresh). However if someone is also writing to an HDD at the same time, it'll get poor HDD write performance. We at least want to maintain good write performance for other devices when one device is attacked by some "massive parallel" workload, or suffers from slow write bandwidth, or somehow get stalled due to some error condition (eg. NFS server not responding). For a stalled device, we need to completely block its dirtiers, too, before its bdi dirty pages grow all the way up to the global limit and leave no space for the other functional devices. So change the loop exit condition to /* * Always enforce global dirty limit; also enforce bdi dirty limit * if the normal max_pause sleeps cannot keep things under control. */ if (nr_dirty < dirty_thresh && (bdi_dirty < bdi_thresh || bdi->dirty_ratelimit > 1)) break; which can be further simplified to if (task_ratelimit) break; Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-13 19:47:32 -06:00

writeback: introduce max-pause and pass-good dirty limits The max-pause limit helps to keep the sleep time inside balance_dirty_pages() within MAX_PAUSE=200ms. The 200ms max sleep means per task rate limit of 8pages/200ms=160KB/s when dirty exceeded, which normally is enough to stop dirtiers from continue pushing the dirty pages high, unless there are a sufficient large number of slow dirtiers (eg. 500 tasks doing 160KB/s will still sum up to 80MB/s, exceeding the write bandwidth of a slow disk and hence accumulating more and more dirty pages). The pass-good limit helps to let go of the good bdi's in the presence of a blocked bdi (ie. NFS server not responding) or slow USB disk which for some reason build up a large number of initial dirty pages that refuse to go away anytime soon. For example, given two bdi's A and B and the initial state bdi_thresh_A = dirty_thresh / 2 bdi_thresh_B = dirty_thresh / 2 bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 Then A get blocked, after a dozen seconds bdi_thresh_A = 0 bdi_thresh_B = dirty_thresh bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 The (bdi_dirty_B < bdi_thresh_B) test is now useless and the dirty pages will be effectively throttled by condition (nr_dirty < dirty_thresh). This has two problems: (1) we lose the protections for light dirtiers (2) balance_dirty_pages() effectively becomes IO-less because the (bdi_nr_reclaimable > bdi_thresh) test won't be true. This is good for IO, but balance_dirty_pages() loses an important way to break out of the loop which leads to more spread out throttle delays. DIRTY_PASSGOOD_AREA can eliminate the above issues. The only problem is, DIRTY_PASSGOOD_AREA needs to be defined as 2 to fully cover the above example while this patch uses the more conservative value 8 so as not to surprise people with too many dirty pages than expected. The max-pause limit won't noticeably impact the speed dirty pages are knocked down when there is a sudden drop of global/bdi dirty thresholds. Because the heavy dirties will be throttled below 160KB/s which is slow enough. It does help to avoid long dirty throttle delays and especially will make light dirtiers more responsive. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-19 22:18:42 -06:00

mm: Make task in balance_dirty_pages() killable There is no reason why task in balance_dirty_pages() shouldn't be killable and it helps in recovering from some error conditions (like when filesystem goes in error state and cannot accept writeback anymore but we still want to kill processes using it to be able to unmount it). There will be follow up patches to further abort the generic_perform_write() and other filesystem write loops, to avoid large write + SIGKILL combination exceeding the dirty limit and possibly strange OOM. Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Tested-by: Kazuya Mio <k-mio@sx.jp.nec.com> Reviewed-by: Neil Brown <neilb@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-16 19:34:48 +08:00

writeback: permit through good bdi even when global dirty exceeded On a system with 1 local mount and 1 NFS mount, if the NFS server becomes not responding when dd to the NFS mount, the NFS dirty pages may exceed the global dirty limit and _every_ task involving writing will be blocked. The whole system appears unresponsive. The workaround is to permit through the bdi's that only has a small number of dirty pages. The number chosen (bdi_stat_error pages) is not enough to enable the local disk to run in optimal throughput, however is enough to make the system responsive on a broken NFS mount. The user can then kill the dirtiers on the NFS mount and increase the global dirty limit to bring up the local disk's throughput. It risks allowing dirty pages to grow much larger than the global dirty limit when there are 1000+ mounts, however that's very unlikely to happen, especially in low memory profiles. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-12-02 10:21:33 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: permit through good bdi even when global dirty exceeded On a system with 1 local mount and 1 NFS mount, if the NFS server becomes not responding when dd to the NFS mount, the NFS dirty pages may exceed the global dirty limit and _every_ task involving writing will be blocked. The whole system appears unresponsive. The workaround is to permit through the bdi's that only has a small number of dirty pages. The number chosen (bdi_stat_error pages) is not enough to enable the local disk to run in optimal throughput, however is enough to make the system responsive on a broken NFS mount. The user can then kill the dirtiers on the NFS mount and increase the global dirty limit to bring up the local disk's throughput. It risks allowing dirty pages to grow much larger than the global dirty limit when there are 1000+ mounts, however that's very unlikely to happen, especially in low memory profiles. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-12-02 10:21:33 -06:00

scripts/spelling.txt: add "comsume(r)" pattern and fix typo instances Fix typos and add the following to the scripts/spelling.txt: comsume||consume comsumer||consumer comsuming||consuming I see some variable names with this pattern, but this commit is only touching comment blocks to avoid unexpected impact. Link: http://lkml.kernel.org/r/1481573103-11329-19-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-02-27 14:29:25 -08:00

writeback: permit through good bdi even when global dirty exceeded On a system with 1 local mount and 1 NFS mount, if the NFS server becomes not responding when dd to the NFS mount, the NFS dirty pages may exceed the global dirty limit and _every_ task involving writing will be blocked. The whole system appears unresponsive. The workaround is to permit through the bdi's that only has a small number of dirty pages. The number chosen (bdi_stat_error pages) is not enough to enable the local disk to run in optimal throughput, however is enough to make the system responsive on a broken NFS mount. The user can then kill the dirtiers on the NFS mount and increase the global dirty limit to bring up the local disk's throughput. It risks allowing dirty pages to grow much larger than the global dirty limit when there are 1000+ mounts, however that's very unlikely to happen, especially in low memory profiles. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-12-02 10:21:33 -06:00

writeback: s/bdi/wb/ in mm/page-writeback.c Writeback operations will now be per wb (bdi_writeback) instead of bdi. Replace the relevant bdi references in symbol names and comments with wb. This patch is purely cosmetic and doesn't make any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:29 -04:00

writeback: move backing_dev_info->bdi_stat[] into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bdi->bdi_stat[] into wb. * enum bdi_stat_item is renamed to wb_stat_item and the prefix of all enums is changed from BDI_ to WB_. * BDI_STAT_BATCH() -> WB_STAT_BATCH() * [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...) * bdi_stat[_error]() -> wb_stat[_error]() * bdi_writeout_inc() -> wb_writeout_inc() * stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and frees stat. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:27 -04:00

writeback: permit through good bdi even when global dirty exceeded On a system with 1 local mount and 1 NFS mount, if the NFS server becomes not responding when dd to the NFS mount, the NFS dirty pages may exceed the global dirty limit and _every_ task involving writing will be blocked. The whole system appears unresponsive. The workaround is to permit through the bdi's that only has a small number of dirty pages. The number chosen (bdi_stat_error pages) is not enough to enable the local disk to run in optimal throughput, however is enough to make the system responsive on a broken NFS mount. The user can then kill the dirtiers on the NFS mount and increase the global dirty limit to bring up the local disk's throughput. It risks allowing dirty pages to grow much larger than the global dirty limit when there are 1000+ mounts, however that's very unlikely to happen, especially in low memory profiles. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-12-02 10:21:33 -06:00

writeback: remove unused function parameter The parameter `struct bdi_writeback *wb` is not been used in the function body. Remove it. Link: http://lkml.kernel.org/r/1509685485-15278-1-git-send-email-wanglong19@meituan.com Signed-off-by: Wang Long <wanglong19@meituan.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-15 17:39:03 -08:00

writeback: permit through good bdi even when global dirty exceeded On a system with 1 local mount and 1 NFS mount, if the NFS server becomes not responding when dd to the NFS mount, the NFS dirty pages may exceed the global dirty limit and _every_ task involving writing will be blocked. The whole system appears unresponsive. The workaround is to permit through the bdi's that only has a small number of dirty pages. The number chosen (bdi_stat_error pages) is not enough to enable the local disk to run in optimal throughput, however is enough to make the system responsive on a broken NFS mount. The user can then kill the dirtiers on the NFS mount and increase the global dirty limit to bring up the local disk's throughput. It risks allowing dirty pages to grow much larger than the global dirty limit when there are 1000+ mounts, however that's very unlikely to happen, especially in low memory profiles. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-12-02 10:21:33 -06:00

mm: Make task in balance_dirty_pages() killable There is no reason why task in balance_dirty_pages() shouldn't be killable and it helps in recovering from some error conditions (like when filesystem goes in error state and cannot accept writeback anymore but we still want to kill processes using it to be able to unmount it). There will be follow up patches to further abort the generic_perform_write() and other filesystem write loops, to avoid large write + SIGKILL combination exceeding the dirty limit and possibly strange OOM. Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Tested-by: Kazuya Mio <k-mio@sx.jp.nec.com> Reviewed-by: Neil Brown <neilb@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-11-16 19:34:48 +08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: make writeback_in_progress() take bdi_writeback instead of backing_dev_info writeback_in_progress() currently takes @bdi and returns whether writeback is in progress on its root wb (bdi_writeback). In preparation for cgroup writeback support, make it take wb instead. While at it, make it an inline function. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:53 -04:00

writeback: get rid to incorrect references to pdflush in comments Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2009-09-23 19:37:09 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

2010-08-27 18:45:12 -06:00

writeback: consolidate dirty throttle parameters into dirty_throttle_control Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:23 -04:00

writeback: make bdi_start_background_writeback() take bdi_writeback instead of backing_dev_info bdi_start_background_writeback() currently takes @bdi and kicks the root wb (bdi_writeback). In preparation for cgroup writeback support, make it take wb instead. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:54 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

percpu: clean up percpu variable definitions Percpu variable definition is about to be updated such that all percpu symbols including the static ones must be unique. Update percpu variable definitions accordingly. * as,cfq: rename ioc_count uniquely * cpufreq: rename cpu_dbs_info uniquely * xen: move nesting_count out of xen_evtchn_do_upcall() and rename it * mm: move ratelimits out of balance_dirty_pages_ratelimited_nr() and rename it * ipv4,6: rename cookie_scratch uniquely * x86 perf_counter: rename prev_left to pmc_prev_left, irq_entry to pmc_irq_entry and nmi_entry to pmc_nmi_entry * perf_counter: rename disable_count to perf_disable_count * ftrace: rename test_event_disable to ftrace_test_event_disable * kmemleak: rename test_pointer to kmemleak_test_pointer * mce: rename next_interval to mce_next_interval [ Impact: percpu usage cleanups, no duplicate static percpu var names ] Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Dave Jones <davej@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: linux-mm <linux-mm@kvack.org> Cc: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Andi Kleen <andi@firstfloor.org>

2009-06-24 15:13:48 +09:00

writeback: charge leaked page dirties to active tasks It's a years long problem that a large number of short-lived dirtiers (eg. gcc instances in a fast kernel build) may starve long-run dirtiers (eg. dd) as well as pushing the dirty pages to the global hard limit. The solution is to charge the pages dirtied by the exited gcc to the other random dirtying tasks. It sounds not perfect, however should behave good enough in practice, seeing as that throttled tasks aren't actually running so those that are running are more likely to pick it up and get throttled, therefore promoting an equal spread. Randy: fix compile error: 'dirty_throttle_leaks' undeclared in exit.c Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-04-05 13:21:19 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: remove nr_pages_dirtied arg from balance_dirty_pages_ratelimited_nr() There is no reason to pass the nr_pages_dirtied argument, because nr_pages_dirtied value from the caller is unused in balance_dirty_pages_ratelimited_nr(). Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-12-11 16:00:21 -08:00

[PATCH] DocBook: fix some descriptions Some KernelDoc descriptions are updated to match the current code. No code changes. Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-05-01 08:59:26 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: remove nr_pages_dirtied arg from balance_dirty_pages_ratelimited_nr() There is no reason to pass the nr_pages_dirtied argument, because nr_pages_dirtied value from the caller is unused in balance_dirty_pages_ratelimited_nr(). Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-12-11 16:00:21 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: let balance_dirty_pages() work on the matching cgroup bdi_writeback Currently, balance_dirty_pages() always work on bdi->wb. This patch updates it to work on the wb (bdi_writeback) matching memcg and blkcg of the current task as that's what the inode is being dirtied against. balance_dirty_pages_ratelimited() now pins the current wb and passes it to balance_dirty_pages(). As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:40 -04:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: skip tmpfs early in balance_dirty_pages_ratelimited_nr() This helps prevent tmpfs dirtiers from skewing the per-cpu bdp_ratelimits. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 17:53:57 -06:00

writeback: let balance_dirty_pages() work on the matching cgroup bdi_writeback Currently, balance_dirty_pages() always work on bdi->wb. This patch updates it to work on the wb (bdi_writeback) matching memcg and blkcg of the current task as that's what the inode is being dirtied against. balance_dirty_pages_ratelimited() now pins the current wb and passes it to balance_dirty_pages(). As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:40 -04:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:28 -04:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: replace __get_cpu_var uses with this_cpu_ptr Replace places where __get_cpu_var() is used for an address calculation with this_cpu_ptr(). Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-06-04 16:07:56 -07:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

[PATCH] balance_dirty_pages_ratelimited: take nr_pages arg Modify balance_dirty_pages_ratelimited() so that it can take a number-of-pages-which-I-just-dirtied argument. For msync(). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-03-24 03:18:10 -08:00

writeback: fix dirtied pages accounting on sub-page writes When dd in 512bytes, generic_perform_write() calls balance_dirty_pages_ratelimited() 8 times for the same page, but obviously the page is only dirtied once. Fix it by accounting tsk->nr_dirtied and bdp_ratelimits at page dirty time. Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-04-14 07:52:37 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: charge leaked page dirties to active tasks It's a years long problem that a large number of short-lived dirtiers (eg. gcc instances in a fast kernel build) may starve long-run dirtiers (eg. dd) as well as pushing the dirty pages to the global hard limit. The solution is to charge the pages dirtied by the exited gcc to the other random dirtying tasks. It sounds not perfect, however should behave good enough in practice, seeing as that throttled tasks aren't actually running so those that are running are more likely to pick it up and get throttled, therefore promoting an equal spread. Randy: fix compile error: 'dirty_throttle_leaks' undeclared in exit.c Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-04-05 13:21:19 -06:00

mm: replace __get_cpu_var uses with this_cpu_ptr Replace places where __get_cpu_var() is used for an address calculation with this_cpu_ptr(). Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-06-04 16:07:56 -07:00

writeback: charge leaked page dirties to active tasks It's a years long problem that a large number of short-lived dirtiers (eg. gcc instances in a fast kernel build) may starve long-run dirtiers (eg. dd) as well as pushing the dirty pages to the global hard limit. The solution is to charge the pages dirtied by the exited gcc to the other random dirtying tasks. It sounds not perfect, however should behave good enough in practice, seeing as that throttled tasks aren't actually running so those that are running are more likely to pick it up and get throttled, therefore promoting an equal spread. Randy: fix compile error: 'dirty_throttle_leaks' undeclared in exit.c Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-04-05 13:21:19 -06:00

writeback: remove nr_pages_dirtied arg from balance_dirty_pages_ratelimited_nr() There is no reason to pass the nr_pages_dirtied argument, because nr_pages_dirtied value from the caller is unused in balance_dirty_pages_ratelimited_nr(). Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-12-11 16:00:21 -08:00

writeback: charge leaked page dirties to active tasks It's a years long problem that a large number of short-lived dirtiers (eg. gcc instances in a fast kernel build) may starve long-run dirtiers (eg. dd) as well as pushing the dirty pages to the global hard limit. The solution is to charge the pages dirtied by the exited gcc to the other random dirtying tasks. It sounds not perfect, however should behave good enough in practice, seeing as that throttled tasks aren't actually running so those that are running are more likely to pick it up and get throttled, therefore promoting an equal spread. Randy: fix compile error: 'dirty_throttle_leaks' undeclared in exit.c Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-04-05 13:21:19 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] balance_dirty_pages_ratelimited: take nr_pages arg Modify balance_dirty_pages_ratelimited() so that it can take a number-of-pages-which-I-just-dirtied argument. For msync(). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-03-24 03:18:10 -08:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

mm/page-writeback.c: remove unused parameter from balance_dirty_pages() "mapping" parameter to balance_dirty_pages() is not used anymore. Fixes: dfb8ae567835 ("writeback: let balance_dirty_pages() work on the matching cgroup bdi_writeback") Link: http://lkml.kernel.org/r/20170927221311.23263-1-tahsin@google.com Signed-off-by: Tahsin Erdogan <tahsin@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-15 17:33:19 -08:00

writeback: let balance_dirty_pages() work on the matching cgroup bdi_writeback Currently, balance_dirty_pages() always work on bdi->wb. This patch updates it to work on the wb (bdi_writeback) matching memcg and blkcg of the current task as that's what the inode is being dirtied against. balance_dirty_pages_ratelimited() now pins the current wb and passes it to balance_dirty_pages(). As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:40 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: remove nr_pages_dirtied arg from balance_dirty_pages_ratelimited_nr() There is no reason to pass the nr_pages_dirtied argument, because nr_pages_dirtied value from the caller is unused in balance_dirty_pages_ratelimited_nr(). Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2012-12-11 16:00:21 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: move over_bground_thresh() to mm/page-writeback.c and rename it to wb_over_bg_thresh(). The function is closely tied to the dirty throttling mechanism implemented in page-writeback.c. This relocation will allow future updates necessary for cgroup writeback support. While at it, add function comment. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:31 -04:00

writeback: update wb_over_bg_thresh() to use wb_domain aware operations wb_over_bg_thresh() currently uses global_dirty_limits() and wb_dirty_limit() both of which are wrappers around operations which take dirty_throttle_control. For cgroup writeback support, the function will be updated to also consider memcg wb_domains which requires the context information carried in dirty_throttle_control. This patch updates wb_over_bg_thresh() so that it uses the underlying wb_domain aware operations directly and builds the global dirty_throttle_control in the process. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:32 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: update wb_over_bg_thresh() to use wb_domain aware operations wb_over_bg_thresh() currently uses global_dirty_limits() and wb_dirty_limit() both of which are wrappers around operations which take dirty_throttle_control. For cgroup writeback support, the function will be updated to also consider memcg wb_domains which requires the context information carried in dirty_throttle_control. This patch updates wb_over_bg_thresh() so that it uses the underlying wb_domain aware operations directly and builds the global dirty_throttle_control in the process. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:32 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: move over_bground_thresh() to mm/page-writeback.c and rename it to wb_over_bg_thresh(). The function is closely tied to the dirty throttling mechanism implemented in page-writeback.c. This relocation will allow future updates necessary for cgroup writeback support. While at it, add function comment. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:31 -04:00

writeback: update wb_over_bg_thresh() to use wb_domain aware operations wb_over_bg_thresh() currently uses global_dirty_limits() and wb_dirty_limit() both of which are wrappers around operations which take dirty_throttle_control. For cgroup writeback support, the function will be updated to also consider memcg wb_domains which requires the context information carried in dirty_throttle_control. This patch updates wb_over_bg_thresh() so that it uses the underlying wb_domain aware operations directly and builds the global dirty_throttle_control in the process. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:32 -04:00

mm: move most file-based accounting to the node There are now a number of accounting oddities such as mapped file pages being accounted for on the node while the total number of file pages are accounted on the zone. This can be coped with to some extent but it's confusing so this patch moves the relevant file-based accounted. Due to throttling logic in the page allocator for reliable OOM detection, it is still necessary to track dirty and writeback pages on a per-zone basis. [mgorman@techsingularity.net: fix NR_ZONE_WRITE_PENDING accounting] Link: http://lkml.kernel.org/r/1468404004-5085-5-git-send-email-mgorman@techsingularity.net Link: http://lkml.kernel.org/r/1467970510-21195-20-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:20 -07:00

writeback: update wb_over_bg_thresh() to use wb_domain aware operations wb_over_bg_thresh() currently uses global_dirty_limits() and wb_dirty_limit() both of which are wrappers around operations which take dirty_throttle_control. For cgroup writeback support, the function will be updated to also consider memcg wb_domains which requires the context information carried in dirty_throttle_control. This patch updates wb_over_bg_thresh() so that it uses the underlying wb_domain aware operations directly and builds the global dirty_throttle_control in the process. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:32 -04:00

writeback: move over_bground_thresh() to mm/page-writeback.c and rename it to wb_over_bg_thresh(). The function is closely tied to the dirty throttling mechanism implemented in page-writeback.c. This relocation will allow future updates necessary for cgroup writeback support. While at it, add function comment. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:31 -04:00

writeback: update wb_over_bg_thresh() to use wb_domain aware operations wb_over_bg_thresh() currently uses global_dirty_limits() and wb_dirty_limit() both of which are wrappers around operations which take dirty_throttle_control. For cgroup writeback support, the function will be updated to also consider memcg wb_domains which requires the context information carried in dirty_throttle_control. This patch updates wb_over_bg_thresh() so that it uses the underlying wb_domain aware operations directly and builds the global dirty_throttle_control in the process. This patch doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:32 -04:00

writeback: move over_bground_thresh() to mm/page-writeback.c and rename it to wb_over_bg_thresh(). The function is closely tied to the dirty throttling mechanism implemented in page-writeback.c. This relocation will allow future updates necessary for cgroup writeback support. While at it, add function comment. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:31 -04:00

writeback: Fix performance regression in wb_over_bg_thresh() Commit 947e9762a8dd ("writeback: update wb_over_bg_thresh() to use wb_domain aware operations") unintentionally changed this function's meaning from "are there more dirty pages than the background writeback threshold" to "are there more dirty pages than the writeback threshold". The background writeback threshold is typically half of the writeback threshold, so this had the effect of raising the number of dirty pages required to cause a writeback worker to perform background writeout. This can cause a very severe performance regression when a BDI uses BDI_CAP_STRICTLIMIT because balance_dirty_pages() and the writeback worker can now disagree on whether writeback should be initiated. For example, in a system having 1GB of RAM, a single spinning disk, and a "pass-through" FUSE filesystem mounted over the disk, application code mmapped a 128MB file on the disk and was randomly dirtying pages in that mapping. Because FUSE uses strictlimit and has a default max_ratio of only 1%, in balance_dirty_pages, thresh is ~200, bg_thresh is ~100, and the dirty_freerun_ceiling is the average of those, ~150. So, it pauses the dirtying processes when we have 151 dirty pages and wakes up a background writeback worker. But the worker tests the wrong threshold (200 instead of 100), so it does not initiate writeback and just returns. Thus, balance_dirty_pages keeps looping, sleeping and then waking up the worker who will do nothing. It remains stuck in this state until the few dirty pages that we have finally expire and we write them back for that reason. Then the whole process repeats, resulting in near-zero throughput through the FUSE BDI. The fix is to call the parameterized variant of wb_calc_thresh, so that the worker will do writeback if the bg_thresh is exceeded which was the behavior before the referenced commit. Fixes: 947e9762a8dd ("writeback: update wb_over_bg_thresh() to use wb_domain aware operations") Signed-off-by: Howard Cochran <hcochran@kernelspring.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # v4.2+ Tested-by Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2016-03-10 01:12:39 -05:00

writeback: move over_bground_thresh() to mm/page-writeback.c and rename it to wb_over_bg_thresh(). The function is closely tied to the dirty throttling mechanism implemented in page-writeback.c. This relocation will allow future updates necessary for cgroup writeback support. While at it, add function comment. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:31 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: fix incorrect calculation of available memory for memcg domains For memcg domains, the amount of available memory was calculated as min(the amount currently in use + headroom according to memcg, total clean memory) This isn't quite correct as what should be capped by the amount of clean memory is the headroom, not the sum of memory in use and headroom. For example, if a memcg domain has a significant amount of dirty memory, the above can lead to a value which is lower than the current amount in use which doesn't make much sense. In most circumstances, the above leads to a number which is somewhat but not drastically lower. As the amount of memory which can be readily allocated to the memcg domain is capped by the amount of system-wide clean memory which is not already assigned to the memcg itself, the number we want is the amount currently in use + min(headroom according to memcg, clean memory elsewhere in the system) This patch updates mem_cgroup_wb_stats() to return the number of filepages and headroom instead of the calculated available pages. mdtc_cap_avail() is renamed to mdtc_calc_avail() and performs the above calculation from file, headroom, dirty and globally clean pages. v2: Dummy mem_cgroup_wb_stats() implementation wasn't updated leading to build failure when !CGROUP_WRITEBACK. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c2aa723a6093 ("writeback: implement memcg writeback domain based throttling") Signed-off-by: Jens Axboe <axboe@fb.com>

2015-09-29 13:04:26 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: fix incorrect calculation of available memory for memcg domains For memcg domains, the amount of available memory was calculated as min(the amount currently in use + headroom according to memcg, total clean memory) This isn't quite correct as what should be capped by the amount of clean memory is the headroom, not the sum of memory in use and headroom. For example, if a memcg domain has a significant amount of dirty memory, the above can lead to a value which is lower than the current amount in use which doesn't make much sense. In most circumstances, the above leads to a number which is somewhat but not drastically lower. As the amount of memory which can be readily allocated to the memcg domain is capped by the amount of system-wide clean memory which is not already assigned to the memcg itself, the number we want is the amount currently in use + min(headroom according to memcg, clean memory elsewhere in the system) This patch updates mem_cgroup_wb_stats() to return the number of filepages and headroom instead of the calculated available pages. mdtc_cap_avail() is renamed to mdtc_calc_avail() and performs the above calculation from file, headroom, dirty and globally clean pages. v2: Dummy mem_cgroup_wb_stats() implementation wasn't updated leading to build failure when !CGROUP_WRITEBACK. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c2aa723a6093 ("writeback: implement memcg writeback domain based throttling") Signed-off-by: Jens Axboe <axboe@fb.com>

2015-09-29 13:04:26 -04:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: Fix performance regression in wb_over_bg_thresh() Commit 947e9762a8dd ("writeback: update wb_over_bg_thresh() to use wb_domain aware operations") unintentionally changed this function's meaning from "are there more dirty pages than the background writeback threshold" to "are there more dirty pages than the writeback threshold". The background writeback threshold is typically half of the writeback threshold, so this had the effect of raising the number of dirty pages required to cause a writeback worker to perform background writeout. This can cause a very severe performance regression when a BDI uses BDI_CAP_STRICTLIMIT because balance_dirty_pages() and the writeback worker can now disagree on whether writeback should be initiated. For example, in a system having 1GB of RAM, a single spinning disk, and a "pass-through" FUSE filesystem mounted over the disk, application code mmapped a 128MB file on the disk and was randomly dirtying pages in that mapping. Because FUSE uses strictlimit and has a default max_ratio of only 1%, in balance_dirty_pages, thresh is ~200, bg_thresh is ~100, and the dirty_freerun_ceiling is the average of those, ~150. So, it pauses the dirtying processes when we have 151 dirty pages and wakes up a background writeback worker. But the worker tests the wrong threshold (200 instead of 100), so it does not initiate writeback and just returns. Thus, balance_dirty_pages keeps looping, sleeping and then waking up the worker who will do nothing. It remains stuck in this state until the few dirty pages that we have finally expire and we write them back for that reason. Then the whole process repeats, resulting in near-zero throughput through the FUSE BDI. The fix is to call the parameterized variant of wb_calc_thresh, so that the worker will do writeback if the bg_thresh is exceeded which was the behavior before the referenced commit. Fixes: 947e9762a8dd ("writeback: update wb_over_bg_thresh() to use wb_domain aware operations") Signed-off-by: Howard Cochran <hcochran@kernelspring.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # v4.2+ Tested-by Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2016-03-10 01:12:39 -05:00

writeback: implement memcg writeback domain based throttling While cgroup writeback support now connects memcg and blkcg so that writeback IOs are properly attributed and controlled, the IO back pressure propagation mechanism implemented in balance_dirty_pages() and its subroutines wasn't aware of cgroup writeback. Processes belonging to a memcg may have access to only subset of total memory available in the system and not factoring this into dirty throttling rendered it completely ineffective for processes under memcg limits and memcg ended up building a separate ad-hoc degenerate mechanism directly into vmscan code to limit page dirtying. The previous patches updated balance_dirty_pages() and its subroutines so that they can deal with multiple wb_domain's (writeback domains) and defined per-memcg wb_domain. Processes belonging to a non-root memcg are bound to two wb_domains, global wb_domain and memcg wb_domain, and should be throttled according to IO pressures from both domains. This patch updates dirty throttling code so that it repeats similar calculations for the two domains - the differences between the two are few and minor - and applies the lower of the two sets of resulting constraints. wb_over_bg_thresh(), which controls when background writeback terminates, is also updated to consider both global and memcg wb_domains. It returns true if dirty is over bg_thresh for either domain. This makes the dirty throttling mechanism operational for memcg domains including writeback-bandwidth-proportional dirty page distribution inside them but the ad-hoc memcg throttling mechanism in vmscan is still in place. The next patch will rip it out. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:35 -04:00

writeback: move over_bground_thresh() to mm/page-writeback.c and rename it to wb_over_bg_thresh(). The function is closely tied to the dirty throttling mechanism implemented in page-writeback.c. This relocation will allow future updates necessary for cgroup writeback support. While at it, add function comment. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:31 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: convert use of typedef ctl_table to struct ctl_table This typedef is unnecessary and should just be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-06-06 14:38:09 -07:00

sysctl: remove "struct file *" argument of ->proc_handler It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-23 15:57:19 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: schedule periodic writeback with sysctl After disable periodic writeback by writing 0 to dirty_writeback_centisecs, the handler wb_workfn() will not be entered again until the dirty background limit reaches or sync syscall is executed or no enough free memory available or vmscan is triggered. So the periodic writeback can't be enabled by writing a non-zero value to dirty_writeback_centisecs. As it can be disabled by sysctl, it should be able to enable by sysctl as well. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2017-10-10 05:44:13 +08:00

mm/page-writeback.c: make changes of dirty_writeback_centisecs take effect immediately This patch is the followup of the prvious patch: [writeback: schedule periodic writeback with sysctl]. There's another issue to fix. For example, - When the tunable was set to one hour and is reset to one second, the new setting will not take effect for up to one hour. Kicking the flusher threads immediately fixes it. Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2017-10-14 16:38:27 +08:00

writeback: schedule periodic writeback with sysctl After disable periodic writeback by writing 0 to dirty_writeback_centisecs, the handler wb_workfn() will not be entered again until the dirty background limit reaches or sync syscall is executed or no enough free memory available or vmscan is triggered. So the periodic writeback can't be enabled by writing a non-zero value to dirty_writeback_centisecs. As it can be disabled by sysctl, it should be able to enable by sysctl as well. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2017-10-10 05:44:13 +08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: fix problem with !CONFIG_BLOCK compilation When CONFIG_BLOCK isn't enabled: mm/page-writeback.c: In function 'laptop_mode_timer_fn': mm/page-writeback.c:708: error: dereferencing pointer to incomplete type mm/page-writeback.c:709: error: dereferencing pointer to incomplete type Fix this by essentially eliminating the laptop sync handlers when CONFIG_BLOCK isn't set, as most are only used from the block layer code. The exception is laptop_sync_completion() which is used from sys_sync(), make that an empty declaration in that case. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2010-05-20 09:18:47 +02:00

block/laptop_mode: Convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: linux-block@vger.kernel.org Cc: linux-mm@kvack.org Signed-off-by: Kees Cook <keescook@chromium.org>

2017-08-28 15:03:41 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

block/laptop_mode: Convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: linux-block@vger.kernel.org Cc: linux-mm@kvack.org Signed-off-by: Kees Cook <keescook@chromium.org>

2017-08-28 15:03:41 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

block/laptop_mode: Convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: linux-block@vger.kernel.org Cc: linux-mm@kvack.org Signed-off-by: Kees Cook <keescook@chromium.org>

2017-08-28 15:03:41 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

laptop-mode: Make flushes per-device One of the features of laptop-mode is that it forces a writeout of dirty pages if something else triggers a physical read or write from a device. The current implementation flushes pages on all devices, rather than only the one that triggered the flush. This patch alters the behaviour so that only the recently accessed block device is flushed, preventing other disks being spun up for no terribly good reason. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2010-04-06 14:25:14 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

laptop-mode: Make flushes per-device One of the features of laptop-mode is that it forces a writeout of dirty pages if something else triggers a physical read or write from a device. The current implementation flushes pages on all devices, rather than only the one that triggered the flush. This patch alters the behaviour so that only the recently accessed block device is flushed, preventing other disks being spun up for no terribly good reason. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2010-04-06 14:25:14 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

laptop-mode: Make flushes per-device One of the features of laptop-mode is that it forces a writeout of dirty pages if something else triggers a physical read or write from a device. The current implementation flushes pages on all devices, rather than only the one that triggered the flush. This patch alters the behaviour so that only the recently accessed block device is flushed, preventing other disks being spun up for no terribly good reason. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2010-04-06 14:25:14 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: fix problem with !CONFIG_BLOCK compilation When CONFIG_BLOCK isn't enabled: mm/page-writeback.c: In function 'laptop_mode_timer_fn': mm/page-writeback.c:708: error: dereferencing pointer to incomplete type mm/page-writeback.c:709: error: dereferencing pointer to incomplete type Fix this by essentially eliminating the laptop sync handlers when CONFIG_BLOCK isn't set, as most are only used from the block layer code. The exception is laptop_sync_completion() which is used from sys_sync(), make that an empty declaration in that case. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2010-05-20 09:18:47 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] call mm/page-writeback.c:set_ratelimit() when new pages are hot-added ratelimit_pages in page-writeback.c is recalculated (in set_ratelimit()) every time a CPU is hot-added/removed. But this value is not recalculated when new pages are hot-added. This patch fixes that problem by calling set_ratelimit() when new pages are hot-added. [akpm@osdl.org: cleanups] Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-09-29 02:01:25 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

writeback: move global_dirty_limit into wb_domain This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 18:23:22 -04:00

writeback: per task dirty rate limit Add two fields to task_struct. 1) account dirtied pages in the individual tasks, for accuracy 2) per-task balance_dirty_pages() call intervals, for flexibility The balance_dirty_pages() call interval (ie. nr_dirtied_pause) will scale near-sqrt to the safety gap between dirty pages and threshold. The main problem of per-task nr_dirtied is, if 1k+ tasks start dirtying pages at exactly the same time, each task will be assigned a large initial nr_dirtied_pause, so that the dirty threshold will be exceeded long before each task reached its nr_dirtied_pause and hence call balance_dirty_pages(). The solution is to watch for the number of pages dirtied on each CPU in between the calls into balance_dirty_pages(). If it exceeds ratelimit_pages (3% dirty threshold), force call balance_dirty_pages() for a chance to set bdi->dirty_exceeded. In normal situations, this safeguarding condition is not expected to trigger at all. On the sqrt in dirty_poll_interval(): It will serve as an initial guess when dirty pages are still in the freerun area. When dirty pages are floating inside the dirty control scope [freerun, limit], a followup patch will use some refined dirty poll interval to get the desired pause time. thresh-dirty (MB) sqrt 1 16 2 22 4 32 8 45 16 64 32 90 64 128 128 181 256 256 512 362 1024 512 The above table means, given 1MB (or 1GB) gap and the dd tasks polling balance_dirty_pages() on every 16 (or 512) pages, the dirty limit won't be exceeded as long as there are less than 16 (or 512) concurrent dd's. So sqrt naturally leads to less overheads and more safe concurrent tasks for large memory servers, which have large (thresh-freerun) gaps. peter: keep the per-CPU ratelimit for safeguarding the 1k+ tasks case CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Andrea Righi <andrea@betterlinux.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-06-11 18:10:12 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm/writeback: Convert to hotplug state machine Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jens Axboe <axboe@fb.com> Cc: linux-mm@kvack.org Cc: rt@linutronix.de Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20160818125731.27256-6-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2016-08-18 14:57:20 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm/writeback: Convert to hotplug state machine Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jens Axboe <axboe@fb.com> Cc: linux-mm@kvack.org Cc: rt@linutronix.de Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20160818125731.27256-6-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2016-08-18 14:57:20 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

Fix balance_dirty_page() calculations with CONFIG_HIGHMEM This makes balance_dirty_page() always base its calculations on the amount of non-highmem memory in the machine, rather than try to base it on total memory and then falling back on non-highmem memory if the mapping it was writing wasn't highmem capable. This not only fixes a situation where two different writers can have wildly different notions about what is a "balanced" dirty state, but it also means that people with highmem machines don't run into an OOM situation when regular memory fills up with dirty pages. We used to try to handle the latter case by scaling down the dirty_ratio if the machine had a lot of highmem pages in page_writeback_init(), but it wasn't aggressive enough for some situations, and since basing the dirty ratio on highmem memory was broken in the first place, let's just stop doing so. (A variation of this theme fixed Justin Piszcz's OOM problem when copying an 18GB file on a RAID setup). Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Justin Piszcz <jpiszcz@lucidpixels.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Neil Brown <neilb@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-01-29 16:37:38 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: fix initial dirty limit The initial value of global_wb_domain.dirty_limit set by writeback_set_ratelimit() is zeroed out by the memset in wb_domain_init(). Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-08-06 15:47:14 -07:00

mm/writeback: Convert to hotplug state machine Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jens Axboe <axboe@fb.com> Cc: linux-mm@kvack.org Cc: rt@linutronix.de Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20160818125731.27256-6-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2016-08-18 14:57:20 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: implement writeback livelock avoidance using page tagging We try to avoid livelocks of writeback when some steadily creates dirty pages in a mapping we are writing out. For memory-cleaning writeback, using nr_to_write works reasonably well but we cannot really use it for data integrity writeback. This patch tries to solve the problem. The idea is simple: Tag all pages that should be written back with a special tag (TOWRITE) in the radix tree. This can be done rather quickly and thus livelocks should not happen in practice. Then we start doing the hard work of locking pages and sending them to disk only for those pages that have TOWRITE tag set. Note: Adding new radix tree tag grows radix tree node from 288 to 296 bytes for 32-bit archs and from 552 to 560 bytes for 64-bit archs. However, the number of slab/slub items per page remains the same (13 and 7 respectively). Signed-off-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Chris Mason <chris.mason@oracle.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-09 17:19:12 -07:00

mm: fix fatal kernel-doc error Fix a fatal kernel-doc error due to a #define coming between a function's kernel-doc notation and the function signature. (kernel-doc cannot handle this) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-11 14:17:30 -07:00

radix-tree: delete radix_tree_range_tag_if_tagged() This is an exceptionally complicated function with just one caller (tag_pages_for_writeback). We devote a large portion of the runtime of the test suite to testing this one function which has one caller. By introducing the new function radix_tree_iter_tag_set(), we can eliminate all of the complexity while keeping the performance. The caller can now use a fairly standard radix_tree_for_each() loop, and it doesn't need to worry about tricksy things like 'start' wrapping. The test suite continues to spend a large amount of time investigating this function, but now it's testing the underlying primitives such as radix_tree_iter_resume() and the radix_tree_for_each_tagged() iterator which are also used by other parts of the kernel. Link: http://lkml.kernel.org/r/1480369871-5271-57-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-12-14 15:08:55 -08:00

mm: implement writeback livelock avoidance using page tagging We try to avoid livelocks of writeback when some steadily creates dirty pages in a mapping we are writing out. For memory-cleaning writeback, using nr_to_write works reasonably well but we cannot really use it for data integrity writeback. This patch tries to solve the problem. The idea is simple: Tag all pages that should be written back with a special tag (TOWRITE) in the radix tree. This can be done rather quickly and thus livelocks should not happen in practice. Then we start doing the hard work of locking pages and sending them to disk only for those pages that have TOWRITE tag set. Note: Adding new radix tree tag grows radix tree node from 288 to 296 bytes for 32-bit archs and from 552 to 560 bytes for 64-bit archs. However, the number of slab/slub items per page remains the same (13 and 7 respectively). Signed-off-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Chris Mason <chris.mason@oracle.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-09 17:19:12 -07:00

radix-tree: delete radix_tree_range_tag_if_tagged() This is an exceptionally complicated function with just one caller (tag_pages_for_writeback). We devote a large portion of the runtime of the test suite to testing this one function which has one caller. By introducing the new function radix_tree_iter_tag_set(), we can eliminate all of the complexity while keeping the performance. The caller can now use a fairly standard radix_tree_for_each() loop, and it doesn't need to worry about tricksy things like 'start' wrapping. The test suite continues to spend a large amount of time investigating this function, but now it's testing the underlying primitives such as radix_tree_iter_resume() and the radix_tree_for_each_tagged() iterator which are also used by other parts of the kernel. Link: http://lkml.kernel.org/r/1480369871-5271-57-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-12-14 15:08:55 -08:00

mm: implement writeback livelock avoidance using page tagging We try to avoid livelocks of writeback when some steadily creates dirty pages in a mapping we are writing out. For memory-cleaning writeback, using nr_to_write works reasonably well but we cannot really use it for data integrity writeback. This patch tries to solve the problem. The idea is simple: Tag all pages that should be written back with a special tag (TOWRITE) in the radix tree. This can be done rather quickly and thus livelocks should not happen in practice. Then we start doing the hard work of locking pages and sending them to disk only for those pages that have TOWRITE tag set. Note: Adding new radix tree tag grows radix tree node from 288 to 296 bytes for 32-bit archs and from 552 to 560 bytes for 64-bit archs. However, the number of slab/slub items per page remains the same (13 and 7 respectively). Signed-off-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Chris Mason <chris.mason@oracle.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-09 17:19:12 -07:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

consolidate generic_writepages and mpage_writepages Clean up massive code duplication between mpage_writepages() and generic_writepages(). The new generic function, write_cache_pages() takes a function pointer argument, which will be called for each page to be written. Maybe cifs_writepages() too can use this infrastructure, but I'm not touching that with a ten-foot pole. The upcoming page writeback support in fuse will also want this. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-10 22:22:51 -07:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

consolidate generic_writepages and mpage_writepages Clean up massive code duplication between mpage_writepages() and generic_writepages(). The new generic function, write_cache_pages() takes a function pointer argument, which will be called for each page to be written. Maybe cifs_writepages() too can use this infrastructure, but I'm not touching that with a ten-foot pole. The upcoming page writeback support in fuse will also want this. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-10 22:22:51 -07:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

consolidate generic_writepages and mpage_writepages Clean up massive code duplication between mpage_writepages() and generic_writepages(). The new generic function, write_cache_pages() takes a function pointer argument, which will be called for each page to be written. Maybe cifs_writepages() too can use this infrastructure, but I'm not touching that with a ten-foot pole. The upcoming page writeback support in fuse will also want this. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-10 22:22:51 -07:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: implement writeback livelock avoidance using page tagging We try to avoid livelocks of writeback when some steadily creates dirty pages in a mapping we are writing out. For memory-cleaning writeback, using nr_to_write works reasonably well but we cannot really use it for data integrity writeback. This patch tries to solve the problem. The idea is simple: Tag all pages that should be written back with a special tag (TOWRITE) in the radix tree. This can be done rather quickly and thus livelocks should not happen in practice. Then we start doing the hard work of locking pages and sending them to disk only for those pages that have TOWRITE tag set. Note: Adding new radix tree tag grows radix tree node from 288 to 296 bytes for 32-bit archs and from 552 to 560 bytes for 64-bit archs. However, the number of slab/slub items per page remains the same (13 and 7 respectively). Signed-off-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Chris Mason <chris.mason@oracle.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-09 17:19:12 -07:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

consolidate generic_writepages and mpage_writepages Clean up massive code duplication between mpage_writepages() and generic_writepages(). The new generic function, write_cache_pages() takes a function pointer argument, which will be called for each page to be written. Maybe cifs_writepages() too can use this infrastructure, but I'm not touching that with a ten-foot pole. The upcoming page writeback support in fuse will also want this. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-10 22:22:51 -07:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: write_cache_pages cyclic fix In write_cache_pages, scanned == 1 is supposed to mean that cyclic writeback has circled through zero, thus we should not circle again. However it gets set to 1 after the first successful pagevec lookup. This leads to cases where not enough data gets written. Counterexample: file with first 10 pages dirty, writeback_index == 5, nr_to_write == 10. Then the 5 last pages will be found, and scanned will be set to 1, after writing those out, we will not cycle back to get the first 5. Rework this logic, now we'll always cycle unless we started off from index 0. When cycling, only write out as far as 1 page before the start page from the first cycle (so we don't write parts of the file twice). Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:04 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: write_cache_pages early loop termination We'd like to break out of the loop early in many situations, however the existing code has been setting mapping->writeback_index past the final page in the pagevec lookup for cyclic writeback. This is a problem if we don't process all pages up to the final page. Currently the code mostly keeps writeback_index reasonable and hacked around this by not breaking out of the loop or writing pages outside the range in these cases. Keep track of a real "done index" that enables us to terminate the loop in a much more flexible manner. Needed by the subsequent patch to preserve writepage errors, and then further patches to break out of the loop early for other reasons. However there are no functional changes with this patch alone. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:06 -08:00

mm: write_cache_pages cyclic fix In write_cache_pages, scanned == 1 is supposed to mean that cyclic writeback has circled through zero, thus we should not circle again. However it gets set to 1 after the first successful pagevec lookup. This leads to cases where not enough data gets written. Counterexample: file with first 10 pages dirty, writeback_index == 5, nr_to_write == 10. Then the 5 last pages will be found, and scanned will be set to 1, after writing those out, we will not cycle back to get the first 5. Rework this logic, now we'll always cycle unless we started off from index 0. When cycling, only write out as far as 1 page before the start page from the first cycle (so we don't write parts of the file twice). Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:04 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: implement writeback livelock avoidance using page tagging We try to avoid livelocks of writeback when some steadily creates dirty pages in a mapping we are writing out. For memory-cleaning writeback, using nr_to_write works reasonably well but we cannot really use it for data integrity writeback. This patch tries to solve the problem. The idea is simple: Tag all pages that should be written back with a special tag (TOWRITE) in the radix tree. This can be done rather quickly and thus livelocks should not happen in practice. Then we start doing the hard work of locking pages and sending them to disk only for those pages that have TOWRITE tag set. Note: Adding new radix tree tag grows radix tree node from 288 to 296 bytes for 32-bit archs and from 552 to 560 bytes for 64-bit archs. However, the number of slab/slub items per page remains the same (13 and 7 respectively). Signed-off-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Chris Mason <chris.mason@oracle.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-09 17:19:12 -07:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm, pagevec: remove cold parameter for pagevecs Every pagevec_init user claims the pages being released are hot even in cases where it is unlikely the pages are hot. As no one cares about the hotness of pages being released to the allocator, just ditch the parameter. No performance impact is expected as the overhead is marginal. The parameter is removed simply because it is a bit stupid to have a useless parameter copied everywhere. Link: http://lkml.kernel.org/r/20171018075952.10627-6-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-15 17:37:52 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: write_cache_pages cyclic fix In write_cache_pages, scanned == 1 is supposed to mean that cyclic writeback has circled through zero, thus we should not circle again. However it gets set to 1 after the first successful pagevec lookup. This leads to cases where not enough data gets written. Counterexample: file with first 10 pages dirty, writeback_index == 5, nr_to_write == 10. Then the 5 last pages will be found, and scanned will be set to 1, after writing those out, we will not cycle back to get the first 5. Rework this logic, now we'll always cycle unless we started off from index 0. When cycling, only write out as far as 1 page before the start page from the first cycle (so we don't write parts of the file twice). Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:04 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-04-01 15:29:47 +03:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: write_cache_pages cyclic fix In write_cache_pages, scanned == 1 is supposed to mean that cyclic writeback has circled through zero, thus we should not circle again. However it gets set to 1 after the first successful pagevec lookup. This leads to cases where not enough data gets written. Counterexample: file with first 10 pages dirty, writeback_index == 5, nr_to_write == 10. Then the 5 last pages will be found, and scanned will be set to 1, after writing those out, we will not cycle back to get the first 5. Rework this logic, now we'll always cycle unless we started off from index 0. When cycling, only write out as far as 1 page before the start page from the first cycle (so we don't write parts of the file twice). Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:04 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

writeback: introduce .tagged_writepages for the WB_SYNC_NONE sync stage sync(2) is performed in two stages: the WB_SYNC_NONE sync and the WB_SYNC_ALL sync. Identify the first stage with .tagged_writepages and do livelock prevention for it, too. Jan's commit f446daaea9 ("mm: implement writeback livelock avoidance using page tagging") is a partial fix in that it only fixed the WB_SYNC_ALL phase livelock. Although ext4 is tested to no longer livelock with commit f446daaea9, it may due to some "redirty_tail() after pages_skipped" effect which is by no means a guarantee for _all_ the file systems. Note that writeback_inodes_sb() is called by not only sync(), they are treated the same because the other callers also need livelock prevention. Impact: It changes the order in which pages/inodes are synced to disk. Now in the WB_SYNC_NONE stage, it won't proceed to write the next inode until finished with the current inode. Acked-by: Jan Kara <jack@suse.cz> CC: Dave Chinner <david@fromorbit.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-06-06 10:38:15 -06:00

mm: implement writeback livelock avoidance using page tagging We try to avoid livelocks of writeback when some steadily creates dirty pages in a mapping we are writing out. For memory-cleaning writeback, using nr_to_write works reasonably well but we cannot really use it for data integrity writeback. This patch tries to solve the problem. The idea is simple: Tag all pages that should be written back with a special tag (TOWRITE) in the radix tree. This can be done rather quickly and thus livelocks should not happen in practice. Then we start doing the hard work of locking pages and sending them to disk only for those pages that have TOWRITE tag set. Note: Adding new radix tree tag grows radix tree node from 288 to 296 bytes for 32-bit archs and from 552 to 560 bytes for 64-bit archs. However, the number of slab/slub items per page remains the same (13 and 7 respectively). Signed-off-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Chris Mason <chris.mason@oracle.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-09 17:19:12 -07:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

writeback: introduce .tagged_writepages for the WB_SYNC_NONE sync stage sync(2) is performed in two stages: the WB_SYNC_NONE sync and the WB_SYNC_ALL sync. Identify the first stage with .tagged_writepages and do livelock prevention for it, too. Jan's commit f446daaea9 ("mm: implement writeback livelock avoidance using page tagging") is a partial fix in that it only fixed the WB_SYNC_ALL phase livelock. Although ext4 is tested to no longer livelock with commit f446daaea9, it may due to some "redirty_tail() after pages_skipped" effect which is by no means a guarantee for _all_ the file systems. Note that writeback_inodes_sb() is called by not only sync(), they are treated the same because the other callers also need livelock prevention. Impact: It changes the order in which pages/inodes are synced to disk. Now in the WB_SYNC_NONE stage, it won't proceed to write the next inode until finished with the current inode. Acked-by: Jan Kara <jack@suse.cz> CC: Dave Chinner <david@fromorbit.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2010-06-06 10:38:15 -06:00

mm: implement writeback livelock avoidance using page tagging We try to avoid livelocks of writeback when some steadily creates dirty pages in a mapping we are writing out. For memory-cleaning writeback, using nr_to_write works reasonably well but we cannot really use it for data integrity writeback. This patch tries to solve the problem. The idea is simple: Tag all pages that should be written back with a special tag (TOWRITE) in the radix tree. This can be done rather quickly and thus livelocks should not happen in practice. Then we start doing the hard work of locking pages and sending them to disk only for those pages that have TOWRITE tag set. Note: Adding new radix tree tag grows radix tree node from 288 to 296 bytes for 32-bit archs and from 552 to 560 bytes for 64-bit archs. However, the number of slab/slub items per page remains the same (13 and 7 respectively). Signed-off-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Chris Mason <chris.mason@oracle.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-08-09 17:19:12 -07:00

mm: write_cache_pages early loop termination We'd like to break out of the loop early in many situations, however the existing code has been setting mapping->writeback_index past the final page in the pagevec lookup for cyclic writeback. This is a problem if we don't process all pages up to the final page. Currently the code mostly keeps writeback_index reasonable and hacked around this by not breaking out of the loop or writing pages outside the range in these cases. Keep track of a real "done index" that enables us to terminate the loop in a much more flexible manner. Needed by the subsequent patch to preserve writepage errors, and then further patches to break out of the loop early for other reasons. However there are no functional changes with this patch alone. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:06 -08:00

mm: write_cache_pages cleanups Get rid of some complex expressions from flow control statements, add a comment, remove some duplicate code. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:09 -08:00

mm: use pagevec_lookup_range_tag() in write_cache_pages() Use pagevec_lookup_range_tag() in write_cache_pages() as it is interested only in pages from given range. Remove unnecessary code resulting from this. Link: http://lkml.kernel.org/r/20171009151359.31984-12-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-15 17:35:09 -08:00

mm: remove nr_pages argument from pagevec_lookup_{,range}_tag() All users of pagevec_lookup() and pagevec_lookup_range() now pass PAGEVEC_SIZE as a desired number of pages. Just drop the argument. Link: http://lkml.kernel.org/r/20171009151359.31984-15-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-15 17:35:19 -08:00

mm: write_cache_pages cleanups Get rid of some complex expressions from flow control statements, add a comment, remove some duplicate code. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:09 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

2011-03-22 16:33:40 -07:00

mm: write_cache_pages terminate quickly Terminate the write_cache_pages loop upon encountering the first page past end, without locking the page. Pages cannot have their index change when we have a reference on them (truncate, eg truncate_inode_pages_range performs the same check without the page lock). Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:11 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: write_cache_pages cleanups Get rid of some complex expressions from flow control statements, add a comment, remove some duplicate code. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:09 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: write_cache_pages cleanups Get rid of some complex expressions from flow control statements, add a comment, remove some duplicate code. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:09 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: write_cache_pages optimise page cleaning In write_cache_pages, if we get stuck behind another process that is cleaning pages, we will be forced to wait for them to finish, then perform our own writeout (if it was redirtied during the long wait), then wait for that. If a page under writeout is still clean, we can skip waiting for it (if we're part of a data integrity sync, we'll be waiting for all writeout pages afterwards, so we'll still be waiting for the other guy's write that's cleaned the page). Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:10 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: write_cache_pages optimise page cleaning In write_cache_pages, if we get stuck behind another process that is cleaning pages, we will be forced to wait for them to finish, then perform our own writeout (if it was redirtied during the long wait), then wait for that. If a page under writeout is still clean, we can skip waiting for it (if we're part of a data integrity sync, we'll be waiting for all writeout pages afterwards, so we'll still be waiting for the other guy's write that's cleaned the page). Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:10 -08:00

mm: write_cache_pages cleanups Get rid of some complex expressions from flow control statements, add a comment, remove some duplicate code. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:09 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info Now that we got rid of the bdi abuse on character devices we can always use sb->s_bdi to get at the backing_dev_info for a file, except for the block device special case. Export inode_to_bdi and replace uses of mapping->backing_dev_info with it to prepare for the removal of mapping->backing_dev_info. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-01-14 10:42:36 +01:00

consolidate generic_writepages and mpage_writepages Clean up massive code duplication between mpage_writepages() and generic_writepages(). The new generic function, write_cache_pages() takes a function pointer argument, which will be called for each page to be written. Maybe cifs_writepages() too can use this infrastructure, but I'm not touching that with a ten-foot pole. The upcoming page writeback support in fuse will also want this. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-10 22:22:51 -07:00

mm: write_cache_pages writepage error fix In write_cache_pages, if ret signals a real error, but we still have some pages left in the pagevec, done would be set to 1, but the remaining pages would continue to be processed and ret will be overwritten in the process. It could easily be overwritten with success, and thus success will be returned even if there is an error. Thus the caller is told all writes succeeded, wheras in reality some did not. Fix this by bailing immediately if there is an error, and retaining the first error code. This is a data integrity bug. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:06 -08:00

2011-03-22 16:33:40 -07:00

mm: write_cache_pages writepage error fix In write_cache_pages, if ret signals a real error, but we still have some pages left in the pagevec, done would be set to 1, but the remaining pages would continue to be processed and ret will be overwritten in the process. It could easily be overwritten with success, and thus success will be returned even if there is an error. Thus the caller is told all writes succeeded, wheras in reality some did not. Fix this by bailing immediately if there is an error, and retaining the first error code. This is a data integrity bug. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:06 -08:00

writeback: pay attention to wbc->nr_to_write in write_cache_pages If a filesystem writes more than one page in ->writepage, write_cache_pages fails to notice this and continues to attempt writeback when wbc->nr_to_write has gone negative - this trace was captured from XFS: wbc_writeback_start: towrt=1024 wbc_writepage: towrt=1024 wbc_writepage: towrt=0 wbc_writepage: towrt=-1 wbc_writepage: towrt=-5 wbc_writepage: towrt=-21 wbc_writepage: towrt=-85 This has adverse effects on filesystem writeback behaviour. write_cache_pages() needs to terminate after a certain number of pages are written, not after a certain number of calls to ->writepage are made. This is a regression introduced by 17bc6c30cf6bfffd816bdc53682dd46fc34a2cf4 ("vfs: Add no_nrwrite_index_update writeback control flag"), but cannot be reverted directly due to subsequent bug fixes that have gone in on top of it. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-06-09 10:37:18 +10:00

mm: write_cache_pages writepage error fix In write_cache_pages, if ret signals a real error, but we still have some pages left in the pagevec, done would be set to 1, but the remaining pages would continue to be processed and ret will be overwritten in the process. It could easily be overwritten with success, and thus success will be returned even if there is an error. Thus the caller is told all writes succeeded, wheras in reality some did not. Fix this by bailing immediately if there is an error, and retaining the first error code. This is a data integrity bug. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:06 -08:00

writeback: write_cache_pages doesn't terminate at nr_to_write <= 0 I noticed XFS writeback in 2.6.36-rc1 was much slower than it should have been. Enabling writeback tracing showed: flush-253:16-8516 [007] 1342952.351608: wbc_writepage: bdi 253:16: towrt=1024 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0 flush-253:16-8516 [007] 1342952.351654: wbc_writepage: bdi 253:16: towrt=1023 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0 flush-253:16-8516 [000] 1342952.369520: wbc_writepage: bdi 253:16: towrt=0 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0 flush-253:16-8516 [000] 1342952.369542: wbc_writepage: bdi 253:16: towrt=-1 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0 flush-253:16-8516 [000] 1342952.369549: wbc_writepage: bdi 253:16: towrt=-2 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0 Writeback is not terminating in background writeback if ->writepage is returning with wbc->nr_to_write == 0, resulting in sub-optimal single page writeback on XFS. Fix the write_cache_pages loop to terminate correctly when this situation occurs and so prevent this sub-optimal background writeback pattern. This improves sustained sequential buffered write performance from around 250MB/s to 750MB/s for a 100GB file on an XFS filesystem on my 8p test VM. Cc:<stable@kernel.org> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de>

2010-08-24 11:44:34 +10:00

mm: write_cache_pages integrity fix In write_cache_pages, nr_to_write is heeded even for data-integrity syncs, so the function will return success after writing out nr_to_write pages, even if that was not sufficient to guarantee data integrity. The callers tend to set it to values that could break data interity semantics easily in practice. For example, nr_to_write can be set to mapping->nr_pages * 2, however if a file has a single, dirty page, then fsync is called, subsequent pages might be concurrently added and dirtied, then write_cache_pages might writeout two of these newly dirty pages, while not writing out the old page that should have been written out. Fix this by ignoring nr_to_write if it is a data integrity sync. This is a data integrity bug. The reason this has been done in the past is to avoid stalling sync operations behind page dirtiers. "If a file has one dirty page at offset 1000000000000000 then someone does an fsync() and someone else gets in first and starts madly writing pages at offset 0, we want to write that page at 1000000000000000. Somehow." What we do today is return success after an arbitrary amount of pages are written, whether or not we have provided the data-integrity semantics that the caller has asked for. Even this doesn't actually fix all stall cases completely: in the above situation, if the file has a huge number of pages in pagecache (but not dirty), then mapping->nrpages is going to be huge, even if pages are being dirtied. This change does indeed make the possibility of long stalls lager, and that's not a good thing, but lying about data integrity is even worse. We have to either perform the sync, or return -ELINUXISLAME so at least the caller knows what has happened. There are subsequent competing approaches in the works to solve the stall problems properly, without compromising data integrity. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:08 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

Fix page writeback thinko, causing Berkeley DB slowdown A bug was introduced into write_cache_pages cyclic writeout by commit 31a12666d8f0c22235297e1c1575f82061480029 ("mm: write_cache_pages cyclic fix"). The intention (and comments) is that we should cycle back and look for more dirty pages at the beginning of the file if there is no more work to be done. But the !done condition was dropped from the test. This means that any time the page writeout loop breaks (eg. due to nr_to_write == 0), we will set index to 0, then goto again. This will set done_index to index, then find done is set, so will proceed to the end of the function. When updating mapping->writeback_index for cyclic writeout, we now use done_index == 0, so we're always cycling back to 0. This seemed to be causing random mmap writes (slapadd and iozone) to start writing more pages from the LRU and writeout would slowdown, and caused bugzilla entry http://bugzilla.kernel.org/show_bug.cgi?id=12604 about Berkeley DB slowing down dramatically. With this patch, iozone random write performance is increased nearly 5x on my system (iozone -B -r 4k -s 64k -s 512m -s 1200m on ext2). Signed-off-by: Nick Piggin <npiggin@suse.de> Reported-and-tested-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-02-12 04:34:23 +01:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: write_cache_pages cyclic fix In write_cache_pages, scanned == 1 is supposed to mean that cyclic writeback has circled through zero, thus we should not circle again. However it gets set to 1 after the first successful pagevec lookup. This leads to cases where not enough data gets written. Counterexample: file with first 10 pages dirty, writeback_index == 5, nr_to_write == 10. Then the 5 last pages will be found, and scanned will be set to 1, after writing those out, we will not cycle back to get the first 5. Rework this logic, now we'll always cycle unless we started off from index 0. When cycling, only write out as far as 1 page before the start page from the first cycle (so we don't write parts of the file twice). Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:04 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: write_cache_pages cyclic fix In write_cache_pages, scanned == 1 is supposed to mean that cyclic writeback has circled through zero, thus we should not circle again. However it gets set to 1 after the first successful pagevec lookup. This leads to cases where not enough data gets written. Counterexample: file with first 10 pages dirty, writeback_index == 5, nr_to_write == 10. Then the 5 last pages will be found, and scanned will be set to 1, after writing those out, we will not cycle back to get the first 5. Rework this logic, now we'll always cycle unless we started off from index 0. When cycling, only write out as far as 1 page before the start page from the first cycle (so we don't write parts of the file twice). Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:04 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

mm: write_cache_pages cyclic fix In write_cache_pages, scanned == 1 is supposed to mean that cyclic writeback has circled through zero, thus we should not circle again. However it gets set to 1 after the first successful pagevec lookup. This leads to cases where not enough data gets written. Counterexample: file with first 10 pages dirty, writeback_index == 5, nr_to_write == 10. Then the 5 last pages will be found, and scanned will be set to 1, after writing those out, we will not cycle back to get the first 5. Rework this logic, now we'll always cycle unless we started off from index 0. When cycling, only write out as far as 1 page before the start page from the first cycle (so we don't write parts of the file twice). Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:39:04 -08:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

writeback: pay attention to wbc->nr_to_write in write_cache_pages If a filesystem writes more than one page in ->writepage, write_cache_pages fails to notice this and continues to attempt writeback when wbc->nr_to_write has gone negative - this trace was captured from XFS: wbc_writeback_start: towrt=1024 wbc_writepage: towrt=1024 wbc_writepage: towrt=0 wbc_writepage: towrt=-1 wbc_writepage: towrt=-5 wbc_writepage: towrt=-21 wbc_writepage: towrt=-85 This has adverse effects on filesystem writeback behaviour. write_cache_pages() needs to terminate after a certain number of pages are written, not after a certain number of calls to ->writepage are made. This is a regression introduced by 17bc6c30cf6bfffd816bdc53682dd46fc34a2cf4 ("vfs: Add no_nrwrite_index_update writeback control flag"), but cannot be reverted directly due to subsequent bug fixes that have gone in on top of it. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2010-06-09 10:37:18 +10:00

mm: Add range_cont mode for writeback Filesystems like ext4 needs to start a new transaction in the writepages for block allocation. This happens with delayed allocation and there is limit to how many credits we can request from the journal layer. So we call write_cache_pages multiple times with wbc->nr_to_write set to the maximum possible value limitted by the max journal credits available. Add a new mode to writeback that enables us to handle this behaviour. In the new mode we update the wbc->range_start to point to the new offset to be written. Next call to call to write_cache_pages will start writeout from specified range_start offset. In the new mode we also limit writing to the specified wbc->range_end. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

2008-07-11 19:27:31 -04:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

consolidate generic_writepages and mpage_writepages Clean up massive code duplication between mpage_writepages() and generic_writepages(). The new generic function, write_cache_pages() takes a function pointer argument, which will be called for each page to be written. Maybe cifs_writepages() too can use this infrastructure, but I'm not touching that with a ten-foot pole. The upcoming page writeback support in fuse will also want this. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-10 22:22:51 -07:00

mm: make generic_writepages() use plugging This recovers a performance regression caused by the removal of the per-device plugging. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

2011-03-17 10:47:06 +01:00

consolidate generic_writepages and mpage_writepages Clean up massive code duplication between mpage_writepages() and generic_writepages(). The new generic function, write_cache_pages() takes a function pointer argument, which will be called for each page to be written. Maybe cifs_writepages() too can use this infrastructure, but I'm not touching that with a ten-foot pole. The upcoming page writeback support in fuse will also want this. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-10 22:22:51 -07:00

mm: make generic_writepages() use plugging This recovers a performance regression caused by the removal of the per-device plugging. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

2011-03-17 10:47:06 +01:00

consolidate generic_writepages and mpage_writepages Clean up massive code duplication between mpage_writepages() and generic_writepages(). The new generic function, write_cache_pages() takes a function pointer argument, which will be called for each page to be written. Maybe cifs_writepages() too can use this infrastructure, but I'm not touching that with a ten-foot pole. The upcoming page writeback support in fuse will also want this. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-10 22:22:51 -07:00

[PATCH] BLOCK: Dissociate generic_writepages() from mpage stuff [try #6] Dissociate the generic_writepages() function from the mpage stuff, moving its declaration to linux/mm.h and actually emitting a full implementation into mm/page-writeback.c. The implementation is a partial duplicate of mpage_writepages() with all BIO references removed. It is used by NFS to do writeback. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-08-29 19:06:09 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

identify multipage ->writepages() calls NFS needs to be able to distinguish between single-page ->writepage() calls and multipage ->writepages() calls. For the single-page writepage calls NFS can kick off the I/O within the context of ->writepage(). For multipage ->writepages calls, nfs_writepage() will leave the I/O pending and nfs_writepages() will kick off the I/O when it all has been queued up within NFS. Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2005-11-16 15:07:01 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: retry writepages() on ENOMEM when doing an data integrity writeback Currently, file system's writepages() function must not fail with an ENOMEM, since if they do, it's possible for buffered data to be lost. This is because on a data integrity writeback writepages() gets called but once, and if it returns ENOMEM, if you're lucky the error will get reflected back to the userspace process calling fsync(). If you aren't lucky, the user is unmounting the file system, and the dirty pages will simply be lost. For this reason, file system code generally will use GFP_NOFS, and in some cases, will retry the allocation in a loop, on the theory that "kernel livelocks are temporary; data loss is forever". Unfortunately, this can indeed cause livelocks, since inside the writepages() call, the file system is holding various mutexes, and these mutexes may prevent the OOM killer from killing its targetted victim if it is also holding on to those mutexes. A better solution would be to allow writepages() to call the memory allocator with flags that give greater latitude to the allocator to fail, and then release its locks and return ENOMEM, and in the case of background writeback, the writes can be retried at a later time. In the case of data-integrity writeback retry after waiting a brief amount of time. Signed-off-by: Theodore Ts'o <tytso@mit.edu>

2017-04-28 09:51:54 -04:00

identify multipage ->writepages() calls NFS needs to be able to distinguish between single-page ->writepage() calls and multipage ->writepages() calls. For the single-page writepage calls NFS can kick off the I/O within the context of ->writepage(). For multipage ->writepages calls, nfs_writepage() will leave the I/O pending and nfs_writepages() will kick off the I/O when it all has been queued up within NFS. Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

2005-11-16 15:07:01 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: drop "wait" parameter from write_one_page() The callers all set it to 1. Also, make it clear that this function will not set any sort of AS_* error, and that the caller must do so if necessary. No existing caller uses this on normal files, so none of them need it. Also, add __must_check here since, in general, the callers need to handle an error here in some fashion. Link: http://lkml.kernel.org/r/20170525103303.6524-1-jlayton@redhat.com Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

2017-07-05 15:26:48 -04:00

[PATCH] DocBook: fix some descriptions Some KernelDoc descriptions are updated to match the current code. No code changes. Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-05-01 08:59:26 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: clean up error handling in write_one_page Don't try to check PageError since that's potentially racy and not necessarily going to be set after writepage errors out. Instead, check the mapping for an error after writepage returns. That should also help us detect errors that occurred if the VM tried to clean the page earlier due to memory pressure. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>

2017-07-05 15:17:19 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: drop "wait" parameter from write_one_page() The callers all set it to 1. Also, make it clear that this function will not set any sort of AS_* error, and that the caller must do so if necessary. No existing caller uses this on normal files, so none of them need it. Also, add __must_check here since, in general, the callers need to handle an error here in some fashion. Link: http://lkml.kernel.org/r/20170525103303.6524-1-jlayton@redhat.com Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

2017-07-05 15:26:48 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: drop "wait" parameter from write_one_page() The callers all set it to 1. Also, make it clear that this function will not set any sort of AS_* error, and that the caller must do so if necessary. No existing caller uses this on normal files, so none of them need it. Also, add __must_check here since, in general, the callers need to handle an error here in some fashion. Link: http://lkml.kernel.org/r/20170525103303.6524-1-jlayton@redhat.com Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

2017-07-05 15:26:48 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-04-01 15:29:47 +03:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: clean up error handling in write_one_page Don't try to check PageError since that's potentially racy and not necessarily going to be set after writepage errors out. Instead, check the mapping for an error after writepage returns. That should also help us detect errors that occurred if the VM tried to clean the page earlier due to memory pressure. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>

2017-07-05 15:17:19 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-04-01 15:29:47 +03:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: clean up error handling in write_one_page Don't try to check PageError since that's potentially racy and not necessarily going to be set after writepage errors out. Instead, check the mapping for an error after writepage returns. That should also help us detect errors that occurred if the VM tried to clean the page earlier due to memory pressure. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>

2017-07-05 15:17:19 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] simplify shmem_aops.set_page_dirty() method shmem backed file does not have page writeback, nor it participates in backing device's dirty or writeback accounting. So using generic __set_page_dirty_nobuffers() for its .set_page_dirty aops method is a bit overkill. It unnecessarily prolongs shm unmap latency. For example, on a densely populated large shm segment (sevearl GBs), the unmapping operation becomes painfully long. Because at unmap, kernel transfers dirty bit in PTE into page struct and to the radix tree tag. The operation of tagging the radix tree is particularly expensive because it has to traverse the tree from the root to the leaf node on every dirty page. What's bothering is that radix tree tag is used for page write back. However, shmem is memory backed and there is no page write back for such file system. And in the end, we spend all that time tagging radix tree and none of that fancy tagging will be used. So let's simplify it by introduce a new aops __set_page_dirty_no_writeback and this will speed up shm unmap. Signed-off-by: Ken Chen <kenchen@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-02-10 01:43:15 -08:00

mm/page-writeback.c: fix __set_page_dirty_no_writeback() return value __set_page_dirty_no_writeback() should return true if it actually transitioned the page from a clean to dirty state although it seems nobody uses its return value at present. Signed-off-by: Bob Liu <lliubbo@gmail.com> Acked-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2011-01-13 15:45:49 -08:00

[PATCH] simplify shmem_aops.set_page_dirty() method shmem backed file does not have page writeback, nor it participates in backing device's dirty or writeback accounting. So using generic __set_page_dirty_nobuffers() for its .set_page_dirty aops method is a bit overkill. It unnecessarily prolongs shm unmap latency. For example, on a densely populated large shm segment (sevearl GBs), the unmapping operation becomes painfully long. Because at unmap, kernel transfers dirty bit in PTE into page struct and to the radix tree tag. The operation of tagging the radix tree is particularly expensive because it has to traverse the tree from the root to the leaf node on every dirty page. What's bothering is that radix tree tag is used for page write back. However, shmem is memory backed and there is no page write back for such file system. And in the end, we spend all that time tagging radix tree and none of that fancy tagging will be used. So let's simplify it by introduce a new aops __set_page_dirty_no_writeback and this will speed up shm unmap. Signed-off-by: Ken Chen <kenchen@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-02-10 01:43:15 -08:00

vfs: add/use account_page_dirtied() Add a helper function account_page_dirtied(). Use that from two callsites. reiser4 adds a function which adds a third callsite. Signed-off-by: Edward Shishkin<edward.shishkin@gmail.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-03-31 15:19:39 -07:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

mm: memcontrol: generalize locking for the page->mem_cgroup binding These patches tag the page cache radix tree eviction entries with the memcg an evicted page belonged to, thus making per-cgroup LRU reclaim work properly and be as adaptive to new cache workingsets as global reclaim already is. This should have been part of the original thrash detection patch series, but was deferred due to the complexity of those patches. This patch (of 5): So far the only sites that needed to exclude charge migration to stabilize page->mem_cgroup have been per-cgroup page statistics, hence the name mem_cgroup_begin_page_stat(). But per-cgroup thrash detection will add another site that needs to ensure page->mem_cgroup lifetime. Rename these locking functions to the more generic lock_page_memcg() and unlock_page_memcg(). Since charge migration is a cgroup1 feature only, we might be able to delete it at some point, and these now easy to identify locking sites along with it. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:04 -07:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

vfs: add/use account_page_dirtied() Add a helper function account_page_dirtied(). Use that from two callsites. reiser4 adds a function which adds a third callsite. Signed-off-by: Edward Shishkin<edward.shishkin@gmail.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-03-31 15:19:39 -07:00

mm: simplify lock_page_memcg() Now that migration doesn't clear page->mem_cgroup of live pages anymore, it's safe to make lock_page_memcg() and the memcg stat functions take pages, and spare the callers from memcg objects. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:22 -07:00

vfs: add/use account_page_dirtied() Add a helper function account_page_dirtied(). Use that from two callsites. reiser4 adds a function which adds a third callsite. Signed-off-by: Edward Shishkin<edward.shishkin@gmail.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-03-31 15:19:39 -07:00

writeback: make backing_dev_info host cgroup-specific bdi_writebacks For the planned cgroup writeback support, on each bdi (backing_dev_info), each memcg will be served by a separate wb (bdi_writeback). This patch updates bdi so that a bdi can host multiple wbs (bdi_writebacks). On the default hierarchy, blkcg implicitly enables memcg. This allows using memcg's page ownership for attributing writeback IOs, and every memcg - blkcg combination can be served by its own wb by assigning a dedicated wb to each memcg. This means that there may be multiple wb's of a bdi mapped to the same blkcg. As congested state is per blkcg - bdi combination, those wb's should share the same congested state. This is achieved by tracking congested state via bdi_writeback_congested structs which are keyed by blkcg. bdi->wb remains unchanged and will keep serving the root cgroup. cgwb's (cgroup wb's) for non-root cgroups are created on-demand or looked up while dirtying an inode according to the memcg of the page being dirtied or current task. Each cgwb is indexed on bdi->cgwb_tree by its memcg id. Once an inode is associated with its wb, it can be retrieved using inode_to_wb(). Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all pages will keep being associated with bdi->wb. v3: inode_attach_wb() in account_page_dirtied() moved inside mapping_cap_account_dirty() block where it's known to be !NULL. Also, an unnecessary NULL check before kfree() removed. Both detected by the kbuild bot. v2: Updated so that wb association is per inode and wb is per memcg rather than blkcg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:37 -04:00

writeback: add more tracepoints Add tracepoints for page dirtying, writeback_single_inode start, inode dirtying and writeback. For the latter two inode events, a pair of events are defined to denote start and end of the operations (the starting one has _start suffix and the one w/o suffix happens after the operation is complete). These inode ops are FS specific and can be non-trivial and having enclosing tracepoints is useful for external tracers. This is part of tracepoint additions to improve visiblity into dirtying / writeback operations for io tracer and userland. v2: writeback_dirty_inode[_start] TPs may be called for files on pseudo FSes w/ unregistered bdi. Check whether bdi->dev is %NULL before dereferencing. v3: buffer dirtying moved to a block TP. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2013-01-11 13:06:37 -08:00

vfs: add/use account_page_dirtied() Add a helper function account_page_dirtied(). Use that from two callsites. reiser4 adds a function which adds a third callsite. Signed-off-by: Edward Shishkin<edward.shishkin@gmail.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-03-31 15:19:39 -07:00

writeback: make backing_dev_info host cgroup-specific bdi_writebacks For the planned cgroup writeback support, on each bdi (backing_dev_info), each memcg will be served by a separate wb (bdi_writeback). This patch updates bdi so that a bdi can host multiple wbs (bdi_writebacks). On the default hierarchy, blkcg implicitly enables memcg. This allows using memcg's page ownership for attributing writeback IOs, and every memcg - blkcg combination can be served by its own wb by assigning a dedicated wb to each memcg. This means that there may be multiple wb's of a bdi mapped to the same blkcg. As congested state is per blkcg - bdi combination, those wb's should share the same congested state. This is achieved by tracking congested state via bdi_writeback_congested structs which are keyed by blkcg. bdi->wb remains unchanged and will keep serving the root cgroup. cgwb's (cgroup wb's) for non-root cgroups are created on-demand or looked up while dirtying an inode according to the memcg of the page being dirtied or current task. Each cgwb is indexed on bdi->cgwb_tree by its memcg id. Once an inode is associated with its wb, it can be retrieved using inode_to_wb(). Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all pages will keep being associated with bdi->wb. v3: inode_attach_wb() in account_page_dirtied() moved inside mapping_cap_account_dirty() block where it's known to be !NULL. Also, an unnecessary NULL check before kfree() removed. Both detected by the kbuild bot. v2: Updated so that wb association is per inode and wb is per memcg rather than blkcg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:37 -04:00

fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info Now that we got rid of the bdi abuse on character devices we can always use sb->s_bdi to get at the backing_dev_info for a file, except for the block device special case. Export inode_to_bdi and replace uses of mapping->backing_dev_info with it to prepare for the removal of mapping->backing_dev_info. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-01-14 10:42:36 +01:00

writeback: make backing_dev_info host cgroup-specific bdi_writebacks For the planned cgroup writeback support, on each bdi (backing_dev_info), each memcg will be served by a separate wb (bdi_writeback). This patch updates bdi so that a bdi can host multiple wbs (bdi_writebacks). On the default hierarchy, blkcg implicitly enables memcg. This allows using memcg's page ownership for attributing writeback IOs, and every memcg - blkcg combination can be served by its own wb by assigning a dedicated wb to each memcg. This means that there may be multiple wb's of a bdi mapped to the same blkcg. As congested state is per blkcg - bdi combination, those wb's should share the same congested state. This is achieved by tracking congested state via bdi_writeback_congested structs which are keyed by blkcg. bdi->wb remains unchanged and will keep serving the root cgroup. cgwb's (cgroup wb's) for non-root cgroups are created on-demand or looked up while dirtying an inode according to the memcg of the page being dirtied or current task. Each cgwb is indexed on bdi->cgwb_tree by its memcg id. Once an inode is associated with its wb, it can be retrieved using inode_to_wb(). Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all pages will keep being associated with bdi->wb. v3: inode_attach_wb() in account_page_dirtied() moved inside mapping_cap_account_dirty() block where it's known to be !NULL. Also, an unnecessary NULL check before kfree() removed. Both detected by the kbuild bot. v2: Updated so that wb association is per inode and wb is per memcg rather than blkcg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:37 -04:00

fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info Now that we got rid of the bdi abuse on character devices we can always use sb->s_bdi to get at the backing_dev_info for a file, except for the block device special case. Export inode_to_bdi and replace uses of mapping->backing_dev_info with it to prepare for the removal of mapping->backing_dev_info. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-01-14 10:42:36 +01:00

mm: memcontrol: per-lruvec stats infrastructure lruvecs are at the intersection of the NUMA node and memcg, which is the scope for most paging activity. Introduce a convenient accounting infrastructure that maintains statistics per node, per memcg, and the lruvec itself. Then convert over accounting sites for statistics that are already tracked in both nodes and memcgs and can be easily switched. [hannes@cmpxchg.org: fix crash in the new cgroup stat keeping code] Link: http://lkml.kernel.org/r/20170531171450.GA10481@cmpxchg.org [hannes@cmpxchg.org: don't track uncharged pages at all Link: http://lkml.kernel.org/r/20170605175254.GA8547@cmpxchg.org [hannes@cmpxchg.org: add missing free_percpu()] Link: http://lkml.kernel.org/r/20170605175354.GB8547@cmpxchg.org [linux@roeck-us.net: hexagon: fix build error caused by include file order] Link: http://lkml.kernel.org/r/20170617153721.GA4382@roeck-us.net Link: http://lkml.kernel.org/r/20170530181724.27197-6-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-07-06 15:40:52 -07:00

mm: remove reclaim and compaction retry approximations If per-zone LRU accounting is available then there is no point approximating whether reclaim and compaction should retry based on pgdat statistics. This is effectively a revert of "mm, vmstat: remove zone and node double accounting by approximating retries" with the difference that inactive/active stats are still available. This preserves the history of why the approximation was retried and why it had to be reverted to handle OOM kills on 32-bit systems. Link: http://lkml.kernel.org/r/1469110261-7365-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:47:31 -07:00

mm: move vmscan writes and file write accounting to the node As reclaim is now node-based, it follows that page write activity due to page reclaim should also be accounted for on the node. For consistency, also account page writes and page dirtying on a per-node basis. After this patch, there are a few remaining zone counters that may appear strange but are fine. NUMA stats are still per-zone as this is a user-space interface that tools consume. NR_MLOCK, NR_SLAB_*, NR_PAGETABLE, NR_KERNEL_STACK and NR_BOUNCE are all allocations that potentially pin low memory and cannot trivially be reclaimed on demand. This information is still useful for debugging a page allocation failure warning. Link: http://lkml.kernel.org/r/1467970510-21195-21-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:23 -07:00

writeback: rework wb_[dec|inc]_stat family of functions Currently the writeback statistics code uses a percpu counters to hold various statistics. Furthermore we have 2 families of functions - those which disable local irq and those which doesn't and whose names begin with double underscore. However, they both end up calling __add_wb_stats which in turn calls percpu_counter_add_batch which is already irq-safe. Exploiting this fact allows to eliminated the __wb_* functions since they don't add any further protection than we already have. Furthermore, refactor the wb_* function to call __add_wb_stat directly without the irq-disabling dance. This will likely result in better runtime of code which deals with modifying the stat counters. While at it also document why percpu_counter_add_batch is in fact preempt and irq-safe since at least 3 people got confused. Link: http://lkml.kernel.org/r/1498029937-27293-1-git-send-email-nborisov@suse.com Signed-off-by: Nikolay Borisov <nborisov@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Josef Bacik <jbacik@fb.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-07-12 14:37:51 -07:00

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-04-01 15:29:47 +03:00

writeback: fix dirtied pages accounting on sub-page writes When dd in 512bytes, generic_perform_write() calls balance_dirty_pages_ratelimited() 8 times for the same page, but obviously the page is only dirtied once. Fix it by accounting tsk->nr_dirtied and bdp_ratelimits at page dirty time. Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-04-14 07:52:37 -06:00

vfs: add/use account_page_dirtied() Add a helper function account_page_dirtied(). Use that from two callsites. reiser4 adds a function which adds a third callsite. Signed-off-by: Edward Shishkin<edward.shishkin@gmail.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-03-31 15:19:39 -07:00

mm: exporting account_page_dirty This allows code outside of the mm core to safely manipulate page state and not worry about the other accounting. Not using these routines means that some code will lose track of the accounting and we get bugs. This has happened once already. Signed-off-by: Michael Rubin <mrubin@google.com> Signed-off-by: Sage Weil <sage@newdream.net>

2010-08-20 02:31:26 -07:00

vfs: add/use account_page_dirtied() Add a helper function account_page_dirtied(). Use that from two callsites. reiser4 adds a function which adds a third callsite. Signed-off-by: Edward Shishkin<edward.shishkin@gmail.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-03-31 15:19:39 -07:00

page_writeback: clean up mess around cancel_dirty_page() This patch replaces cancel_dirty_page() with a helper function account_page_cleaned() which only updates counters. It's called from truncate_complete_page() and from try_to_free_buffers() (hack for ext3). Page is locked in both cases, page-lock protects against concurrent dirtiers: see commit 2d6d7f982846 ("mm: protect set_page_dirty() from ongoing truncation"). Delete_from_page_cache() shouldn't be called for dirty pages, they must be handled by caller (either written or truncated). This patch treats final dirty accounting fixup at the end of __delete_from_page_cache() as a debug check and adds WARN_ON_ONCE() around it. If something removes dirty pages without proper handling that might be a bug and unwritten data might be lost. Hugetlbfs has no dirty pages accounting, ClearPageDirty() is enough here. cancel_dirty_page() in nfs_wb_page_cancel() is redundant. This is helper for nfs_invalidate_page() and it's called only in case complete invalidation. The mess was started in v2.6.20 after commits 46d2277c796f ("Clean up and make try_to_free_buffers() not race with dirty pages") and 3e67c0987d75 ("truncate: clear page dirtiness before running try_to_free_buffers()") first was reverted right in v2.6.20 in commit ecdfc9787fe5 ("Resurrect 'try_to_free_buffers()' VM hackery"), second in v2.6.25 commit a2b345642f53 ("Fix dirty page accounting leak with ext3 data=journal"). Custom fixes were introduced between these points. NFS in v2.6.23, commit 1b3b4a1a2deb ("NFS: Fix a write request leak in nfs_invalidate_page()"). Kludge in __delete_from_page_cache() in v2.6.24, commit 3a6927906f1b ("Do dirty page accounting when removing a page from the page cache"). Since v2.6.25 all of them are redundant. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Tejun Heo <tj@kernel.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-04-14 15:45:27 -07:00

mm: memcontrol: generalize locking for the page->mem_cgroup binding These patches tag the page cache radix tree eviction entries with the memcg an evicted page belonged to, thus making per-cgroup LRU reclaim work properly and be as adaptive to new cache workingsets as global reclaim already is. This should have been part of the original thrash detection patch series, but was deferred due to the complexity of those patches. This patch (of 5): So far the only sites that needed to exclude charge migration to stabilize page->mem_cgroup have been per-cgroup page statistics, hence the name mem_cgroup_begin_page_stat(). But per-cgroup thrash detection will add another site that needs to ensure page->mem_cgroup lifetime. Rename these locking functions to the more generic lock_page_memcg() and unlock_page_memcg(). Since charge migration is a cgroup1 feature only, we might be able to delete it at some point, and these now easy to identify locking sites along with it. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:04 -07:00

page_writeback: clean up mess around cancel_dirty_page() This patch replaces cancel_dirty_page() with a helper function account_page_cleaned() which only updates counters. It's called from truncate_complete_page() and from try_to_free_buffers() (hack for ext3). Page is locked in both cases, page-lock protects against concurrent dirtiers: see commit 2d6d7f982846 ("mm: protect set_page_dirty() from ongoing truncation"). Delete_from_page_cache() shouldn't be called for dirty pages, they must be handled by caller (either written or truncated). This patch treats final dirty accounting fixup at the end of __delete_from_page_cache() as a debug check and adds WARN_ON_ONCE() around it. If something removes dirty pages without proper handling that might be a bug and unwritten data might be lost. Hugetlbfs has no dirty pages accounting, ClearPageDirty() is enough here. cancel_dirty_page() in nfs_wb_page_cancel() is redundant. This is helper for nfs_invalidate_page() and it's called only in case complete invalidation. The mess was started in v2.6.20 after commits 46d2277c796f ("Clean up and make try_to_free_buffers() not race with dirty pages") and 3e67c0987d75 ("truncate: clear page dirtiness before running try_to_free_buffers()") first was reverted right in v2.6.20 in commit ecdfc9787fe5 ("Resurrect 'try_to_free_buffers()' VM hackery"), second in v2.6.25 commit a2b345642f53 ("Fix dirty page accounting leak with ext3 data=journal"). Custom fixes were introduced between these points. NFS in v2.6.23, commit 1b3b4a1a2deb ("NFS: Fix a write request leak in nfs_invalidate_page()"). Kludge in __delete_from_page_cache() in v2.6.24, commit 3a6927906f1b ("Do dirty page accounting when removing a page from the page cache"). Since v2.6.25 all of them are redundant. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Tejun Heo <tj@kernel.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-04-14 15:45:27 -07:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

mm: simplify lock_page_memcg() Now that migration doesn't clear page->mem_cgroup of live pages anymore, it's safe to make lock_page_memcg() and the memcg stat functions take pages, and spare the callers from memcg objects. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:22 -07:00

page_writeback: clean up mess around cancel_dirty_page() This patch replaces cancel_dirty_page() with a helper function account_page_cleaned() which only updates counters. It's called from truncate_complete_page() and from try_to_free_buffers() (hack for ext3). Page is locked in both cases, page-lock protects against concurrent dirtiers: see commit 2d6d7f982846 ("mm: protect set_page_dirty() from ongoing truncation"). Delete_from_page_cache() shouldn't be called for dirty pages, they must be handled by caller (either written or truncated). This patch treats final dirty accounting fixup at the end of __delete_from_page_cache() as a debug check and adds WARN_ON_ONCE() around it. If something removes dirty pages without proper handling that might be a bug and unwritten data might be lost. Hugetlbfs has no dirty pages accounting, ClearPageDirty() is enough here. cancel_dirty_page() in nfs_wb_page_cancel() is redundant. This is helper for nfs_invalidate_page() and it's called only in case complete invalidation. The mess was started in v2.6.20 after commits 46d2277c796f ("Clean up and make try_to_free_buffers() not race with dirty pages") and 3e67c0987d75 ("truncate: clear page dirtiness before running try_to_free_buffers()") first was reverted right in v2.6.20 in commit ecdfc9787fe5 ("Resurrect 'try_to_free_buffers()' VM hackery"), second in v2.6.25 commit a2b345642f53 ("Fix dirty page accounting leak with ext3 data=journal"). Custom fixes were introduced between these points. NFS in v2.6.23, commit 1b3b4a1a2deb ("NFS: Fix a write request leak in nfs_invalidate_page()"). Kludge in __delete_from_page_cache() in v2.6.24, commit 3a6927906f1b ("Do dirty page accounting when removing a page from the page cache"). Since v2.6.25 all of them are redundant. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Tejun Heo <tj@kernel.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-04-14 15:45:27 -07:00

mm: memcontrol: per-lruvec stats infrastructure lruvecs are at the intersection of the NUMA node and memcg, which is the scope for most paging activity. Introduce a convenient accounting infrastructure that maintains statistics per node, per memcg, and the lruvec itself. Then convert over accounting sites for statistics that are already tracked in both nodes and memcgs and can be easily switched. [hannes@cmpxchg.org: fix crash in the new cgroup stat keeping code] Link: http://lkml.kernel.org/r/20170531171450.GA10481@cmpxchg.org [hannes@cmpxchg.org: don't track uncharged pages at all Link: http://lkml.kernel.org/r/20170605175254.GA8547@cmpxchg.org [hannes@cmpxchg.org: add missing free_percpu()] Link: http://lkml.kernel.org/r/20170605175354.GB8547@cmpxchg.org [linux@roeck-us.net: hexagon: fix build error caused by include file order] Link: http://lkml.kernel.org/r/20170617153721.GA4382@roeck-us.net Link: http://lkml.kernel.org/r/20170530181724.27197-6-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-07-06 15:40:52 -07:00

mm: remove reclaim and compaction retry approximations If per-zone LRU accounting is available then there is no point approximating whether reclaim and compaction should retry based on pgdat statistics. This is effectively a revert of "mm, vmstat: remove zone and node double accounting by approximating retries" with the difference that inactive/active stats are still available. This preserves the history of why the approximation was retried and why it had to be reverted to handle OOM kills on 32-bit systems. Link: http://lkml.kernel.org/r/1469110261-7365-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:47:31 -07:00

writeback: implement unlocked_inode_to_wb transaction and use it for stat updates The mechanism for detecting whether an inode should switch its wb (bdi_writeback) association is now in place. This patch build the framework for the actual switching. This patch adds a new inode flag I_WB_SWITCHING, which has two functions. First, the easy one, it ensures that there's only one switching in progress for a give inode. Second, it's used as a mechanism to synchronize wb stat updates. The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters but track the current number of dirty pages and pages under writeback respectively. As such, when an inode is moved from one wb to another, the inode's portion of those stats have to be transferred together; unfortunately, this is a bit tricky as those stat updates are percpu operations which are performed without holding any lock in some places. This patch solves the problem in a similar way as memcg. Each such lockless stat updates are wrapped in transaction surrounded by unlocked_inode_to_wb_begin/end(). During normal operation, they map to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted, mapping->tree_lock is grabbed across the transaction. In turn, the switching path sets I_WB_SWITCHING and waits for a RCU grace period to pass before actually starting to switch, which guarantees that all stat update paths are synchronizing against mapping->tree_lock. This patch still doesn't implement the actual switching. v3: Updated on top of the recent cancel_dirty_page() updates. unlocked_inode_to_wb_begin() now nests inside mem_cgroup_begin_page_stat() to match the locking order. v2: The i_wb access transaction will be used for !stat accesses too. Function names and comments updated accordingly. s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/ s/switch_wb/switch_wbs/ Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-28 14:50:53 -04:00

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-04-01 15:29:47 +03:00

page_writeback: clean up mess around cancel_dirty_page() This patch replaces cancel_dirty_page() with a helper function account_page_cleaned() which only updates counters. It's called from truncate_complete_page() and from try_to_free_buffers() (hack for ext3). Page is locked in both cases, page-lock protects against concurrent dirtiers: see commit 2d6d7f982846 ("mm: protect set_page_dirty() from ongoing truncation"). Delete_from_page_cache() shouldn't be called for dirty pages, they must be handled by caller (either written or truncated). This patch treats final dirty accounting fixup at the end of __delete_from_page_cache() as a debug check and adds WARN_ON_ONCE() around it. If something removes dirty pages without proper handling that might be a bug and unwritten data might be lost. Hugetlbfs has no dirty pages accounting, ClearPageDirty() is enough here. cancel_dirty_page() in nfs_wb_page_cancel() is redundant. This is helper for nfs_invalidate_page() and it's called only in case complete invalidation. The mess was started in v2.6.20 after commits 46d2277c796f ("Clean up and make try_to_free_buffers() not race with dirty pages") and 3e67c0987d75 ("truncate: clear page dirtiness before running try_to_free_buffers()") first was reverted right in v2.6.20 in commit ecdfc9787fe5 ("Resurrect 'try_to_free_buffers()' VM hackery"), second in v2.6.25 commit a2b345642f53 ("Fix dirty page accounting leak with ext3 data=journal"). Custom fixes were introduced between these points. NFS in v2.6.23, commit 1b3b4a1a2deb ("NFS: Fix a write request leak in nfs_invalidate_page()"). Kludge in __delete_from_page_cache() in v2.6.24, commit 3a6927906f1b ("Do dirty page accounting when removing a page from the page cache"). Since v2.6.25 all of them are redundant. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Tejun Heo <tj@kernel.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-04-14 15:45:27 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: protect set_page_dirty() from ongoing truncation Tejun, while reviewing the code, spotted the following race condition between the dirtying and truncation of a page: __set_page_dirty_nobuffers() __delete_from_page_cache() if (TestSetPageDirty(page)) page->mapping = NULL if (PageDirty()) dec_zone_page_state(page, NR_FILE_DIRTY); dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); if (page->mapping) account_page_dirtied(page) __inc_zone_page_state(page, NR_FILE_DIRTY); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE. Dirtiers usually lock out truncation, either by holding the page lock directly, or in case of zap_pte_range(), by pinning the mapcount with the page table lock held. The notable exception to this rule, though, is do_wp_page(), for which this race exists. However, do_wp_page() already waits for a locked page to unlock before setting the dirty bit, in order to prevent a race where clear_page_dirty() misses the page bit in the presence of dirty ptes. Upgrade that wait to a fully locked set_page_dirty() to also cover the situation explained above. Afterwards, the code in set_page_dirty() dealing with a truncation race is no longer needed. Remove it. Reported-by: Tejun Heo <tj@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-01-08 14:32:18 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: simplify lock_page_memcg() Now that migration doesn't clear page->mem_cgroup of live pages anymore, it's safe to make lock_page_memcg() and the memcg stat functions take pages, and spare the callers from memcg objects. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:22 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: __set_page_dirty_nobuffers() uses spin_lock_irqsave() instead of spin_lock_irq() During aio stress test, we observed the following lockdep warning. This mean AIO+numa_balancing is currently deadlockable. The problem is, aio_migratepage disable interrupt, but __set_page_dirty_nobuffers unintentionally enable it again. Generally, all helper function should use spin_lock_irqsave() instead of spin_lock_irq() because they don't know caller at all. other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&ctx->completion_lock)->rlock); <Interrupt> lock(&(&ctx->completion_lock)->rlock); *** DEADLOCK *** dump_stack+0x19/0x1b print_usage_bug+0x1f7/0x208 mark_lock+0x21d/0x2a0 mark_held_locks+0xb9/0x140 trace_hardirqs_on_caller+0x105/0x1d0 trace_hardirqs_on+0xd/0x10 _raw_spin_unlock_irq+0x2c/0x50 __set_page_dirty_nobuffers+0x8c/0xf0 migrate_page_copy+0x434/0x540 aio_migratepage+0xb1/0x140 move_to_new_page+0x7d/0x230 migrate_pages+0x5e5/0x700 migrate_misplaced_page+0xbc/0xf0 do_numa_page+0x102/0x190 handle_pte_fault+0x241/0x970 handle_mm_fault+0x265/0x370 __do_page_fault+0x172/0x5a0 do_page_fault+0x1a/0x70 page_fault+0x28/0x30 Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <jweiner@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-02-06 12:04:24 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

mm: simplify lock_page_memcg() Now that migration doesn't clear page->mem_cgroup of live pages anymore, it's safe to make lock_page_memcg() and the memcg stat functions take pages, and spare the callers from memcg objects. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:22 -07:00

[PATCH] clean up __set_page_dirty_nobuffers() Save a tabstop in __set_page_dirty_nobuffers() and __set_page_dirty_buffers() and a few other places. No functional changes. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-10 02:19:24 -08:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

[PATCH] clean up __set_page_dirty_nobuffers() Save a tabstop in __set_page_dirty_nobuffers() and __set_page_dirty_buffers() and a few other places. No functional changes. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-10 02:19:24 -08:00

mm: __set_page_dirty_nobuffers() uses spin_lock_irqsave() instead of spin_lock_irq() During aio stress test, we observed the following lockdep warning. This mean AIO+numa_balancing is currently deadlockable. The problem is, aio_migratepage disable interrupt, but __set_page_dirty_nobuffers unintentionally enable it again. Generally, all helper function should use spin_lock_irqsave() instead of spin_lock_irq() because they don't know caller at all. other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&ctx->completion_lock)->rlock); <Interrupt> lock(&(&ctx->completion_lock)->rlock); *** DEADLOCK *** dump_stack+0x19/0x1b print_usage_bug+0x1f7/0x208 mark_lock+0x21d/0x2a0 mark_held_locks+0xb9/0x140 trace_hardirqs_on_caller+0x105/0x1d0 trace_hardirqs_on+0xd/0x10 _raw_spin_unlock_irq+0x2c/0x50 __set_page_dirty_nobuffers+0x8c/0xf0 migrate_page_copy+0x434/0x540 aio_migratepage+0xb1/0x140 move_to_new_page+0x7d/0x230 migrate_pages+0x5e5/0x700 migrate_misplaced_page+0xbc/0xf0 do_numa_page+0x102/0x190 handle_pte_fault+0x241/0x970 handle_mm_fault+0x265/0x370 __do_page_fault+0x172/0x5a0 do_page_fault+0x1a/0x70 page_fault+0x28/0x30 Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <jweiner@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-02-06 12:04:24 -08:00

mm: protect set_page_dirty() from ongoing truncation Tejun, while reviewing the code, spotted the following race condition between the dirtying and truncation of a page: __set_page_dirty_nobuffers() __delete_from_page_cache() if (TestSetPageDirty(page)) page->mapping = NULL if (PageDirty()) dec_zone_page_state(page, NR_FILE_DIRTY); dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); if (page->mapping) account_page_dirtied(page) __inc_zone_page_state(page, NR_FILE_DIRTY); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE. Dirtiers usually lock out truncation, either by holding the page lock directly, or in case of zap_pte_range(), by pinning the mapcount with the page table lock held. The notable exception to this rule, though, is do_wp_page(), for which this race exists. However, do_wp_page() already waits for a locked page to unlock before setting the dirty bit, in order to prevent a race where clear_page_dirty() misses the page bit in the presence of dirty ptes. Upgrade that wait to a fully locked set_page_dirty() to also cover the situation explained above. Afterwards, the code in set_page_dirty() dealing with a truncation race is no longer needed. Remove it. Reported-by: Tejun Heo <tj@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-01-08 14:32:18 -08:00

mm: simplify lock_page_memcg() Now that migration doesn't clear page->mem_cgroup of live pages anymore, it's safe to make lock_page_memcg() and the memcg stat functions take pages, and spare the callers from memcg objects. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:22 -07:00

mm: protect set_page_dirty() from ongoing truncation Tejun, while reviewing the code, spotted the following race condition between the dirtying and truncation of a page: __set_page_dirty_nobuffers() __delete_from_page_cache() if (TestSetPageDirty(page)) page->mapping = NULL if (PageDirty()) dec_zone_page_state(page, NR_FILE_DIRTY); dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); if (page->mapping) account_page_dirtied(page) __inc_zone_page_state(page, NR_FILE_DIRTY); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE. Dirtiers usually lock out truncation, either by holding the page lock directly, or in case of zap_pte_range(), by pinning the mapcount with the page table lock held. The notable exception to this rule, though, is do_wp_page(), for which this race exists. However, do_wp_page() already waits for a locked page to unlock before setting the dirty bit, in order to prevent a race where clear_page_dirty() misses the page bit in the presence of dirty ptes. Upgrade that wait to a fully locked set_page_dirty() to also cover the situation explained above. Afterwards, the code in set_page_dirty() dealing with a truncation race is no longer needed. Remove it. Reported-by: Tejun Heo <tj@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-01-08 14:32:18 -08:00

mm: __set_page_dirty_nobuffers() uses spin_lock_irqsave() instead of spin_lock_irq() During aio stress test, we observed the following lockdep warning. This mean AIO+numa_balancing is currently deadlockable. The problem is, aio_migratepage disable interrupt, but __set_page_dirty_nobuffers unintentionally enable it again. Generally, all helper function should use spin_lock_irqsave() instead of spin_lock_irq() because they don't know caller at all. other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&ctx->completion_lock)->rlock); <Interrupt> lock(&(&ctx->completion_lock)->rlock); *** DEADLOCK *** dump_stack+0x19/0x1b print_usage_bug+0x1f7/0x208 mark_lock+0x21d/0x2a0 mark_held_locks+0xb9/0x140 trace_hardirqs_on_caller+0x105/0x1d0 trace_hardirqs_on+0xd/0x10 _raw_spin_unlock_irq+0x2c/0x50 __set_page_dirty_nobuffers+0x8c/0xf0 migrate_page_copy+0x434/0x540 aio_migratepage+0xb1/0x140 move_to_new_page+0x7d/0x230 migrate_pages+0x5e5/0x700 migrate_misplaced_page+0xbc/0xf0 do_numa_page+0x102/0x190 handle_pte_fault+0x241/0x970 handle_mm_fault+0x265/0x370 __do_page_fault+0x172/0x5a0 do_page_fault+0x1a/0x70 page_fault+0x28/0x30 Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <jweiner@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-02-06 12:04:24 -08:00

mm: simplify lock_page_memcg() Now that migration doesn't clear page->mem_cgroup of live pages anymore, it's safe to make lock_page_memcg() and the memcg stat functions take pages, and spare the callers from memcg objects. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:22 -07:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

[PATCH] clean up __set_page_dirty_nobuffers() Save a tabstop in __set_page_dirty_nobuffers() and __set_page_dirty_buffers() and a few other places. No functional changes. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-10 02:19:24 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] set_page_dirty() return value fixes We need set_page_dirty() to return true if it actually transitioned the page from a clean to dirty state. This wasn't right in a couple of places. Do a kernel-wide audit, fix things up. This leaves open the possibility of returning a negative errno from set_page_dirty() sometime in the future. But we don't do that at present. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-03-24 03:18:11 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: simplify lock_page_memcg() Now that migration doesn't clear page->mem_cgroup of live pages anymore, it's safe to make lock_page_memcg() and the memcg stat functions take pages, and spare the callers from memcg objects. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:22 -07:00

[PATCH] set_page_dirty() return value fixes We need set_page_dirty() to return true if it actually transitioned the page from a clean to dirty state. This wasn't right in a couple of places. Do a kernel-wide audit, fix things up. This leaves open the possibility of returning a negative errno from set_page_dirty() sometime in the future. But we don't do that at present. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-03-24 03:18:11 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: fix dirtied pages accounting on redirty De-account the accumulative dirty counters on page redirty. Page redirties (very common in ext4) will introduce mismatch between counters (a) and (b) a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied b) NR_WRITTEN, BDI_WRITTEN This will introduce systematic errors in balanced_rate and result in dirty page position errors (ie. the dirty pages are no longer balanced around the global/bdi setpoints). Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-08-08 15:22:00 -06:00

writeback: attribute stats to the matching per-cgroup bdi_writeback Until now, all WB_* stats were accounted against the root wb (bdi_writeback), now that multiple wb (bdi_writeback) support is in place, let's attributes the stats to the respective per-cgroup wb's. As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:39 -04:00

writeback: fix dirtied pages accounting on redirty De-account the accumulative dirty counters on page redirty. Page redirties (very common in ext4) will introduce mismatch between counters (a) and (b) a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied b) NR_WRITTEN, BDI_WRITTEN This will introduce systematic errors in balanced_rate and result in dirty page position errors (ie. the dirty pages are no longer balanced around the global/bdi setpoints). Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-08-08 15:22:00 -06:00

writeback: implement unlocked_inode_to_wb transaction and use it for stat updates The mechanism for detecting whether an inode should switch its wb (bdi_writeback) association is now in place. This patch build the framework for the actual switching. This patch adds a new inode flag I_WB_SWITCHING, which has two functions. First, the easy one, it ensures that there's only one switching in progress for a give inode. Second, it's used as a mechanism to synchronize wb stat updates. The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters but track the current number of dirty pages and pages under writeback respectively. As such, when an inode is moved from one wb to another, the inode's portion of those stats have to be transferred together; unfortunately, this is a bit tricky as those stat updates are percpu operations which are performed without holding any lock in some places. This patch solves the problem in a similar way as memcg. Each such lockless stat updates are wrapped in transaction surrounded by unlocked_inode_to_wb_begin/end(). During normal operation, they map to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted, mapping->tree_lock is grabbed across the transaction. In turn, the switching path sets I_WB_SWITCHING and waits for a RCU grace period to pass before actually starting to switch, which guarantees that all stat update paths are synchronizing against mapping->tree_lock. This patch still doesn't implement the actual switching. v3: Updated on top of the recent cancel_dirty_page() updates. unlocked_inode_to_wb_begin() now nests inside mem_cgroup_begin_page_stat() to match the locking order. v2: The i_wb access transaction will be used for !stat accesses too. Function names and comments updated accordingly. s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/ s/switch_wb/switch_wbs/ Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-28 14:50:53 -04:00

writeback: attribute stats to the matching per-cgroup bdi_writeback Until now, all WB_* stats were accounted against the root wb (bdi_writeback), now that multiple wb (bdi_writeback) support is in place, let's attributes the stats to the respective per-cgroup wb's. As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:39 -04:00

writeback: implement unlocked_inode_to_wb transaction and use it for stat updates The mechanism for detecting whether an inode should switch its wb (bdi_writeback) association is now in place. This patch build the framework for the actual switching. This patch adds a new inode flag I_WB_SWITCHING, which has two functions. First, the easy one, it ensures that there's only one switching in progress for a give inode. Second, it's used as a mechanism to synchronize wb stat updates. The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters but track the current number of dirty pages and pages under writeback respectively. As such, when an inode is moved from one wb to another, the inode's portion of those stats have to be transferred together; unfortunately, this is a bit tricky as those stat updates are percpu operations which are performed without holding any lock in some places. This patch solves the problem in a similar way as memcg. Each such lockless stat updates are wrapped in transaction surrounded by unlocked_inode_to_wb_begin/end(). During normal operation, they map to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted, mapping->tree_lock is grabbed across the transaction. In turn, the switching path sets I_WB_SWITCHING and waits for a RCU grace period to pass before actually starting to switch, which guarantees that all stat update paths are synchronizing against mapping->tree_lock. This patch still doesn't implement the actual switching. v3: Updated on top of the recent cancel_dirty_page() updates. unlocked_inode_to_wb_begin() now nests inside mem_cgroup_begin_page_stat() to match the locking order. v2: The i_wb access transaction will be used for !stat accesses too. Function names and comments updated accordingly. s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/ s/switch_wb/switch_wbs/ Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-28 14:50:53 -04:00

writeback: fix dirtied pages accounting on redirty De-account the accumulative dirty counters on page redirty. Page redirties (very common in ext4) will introduce mismatch between counters (a) and (b) a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied b) NR_WRITTEN, BDI_WRITTEN This will introduce systematic errors in balanced_rate and result in dirty page position errors (ie. the dirty pages are no longer balanced around the global/bdi setpoints). Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-08-08 15:22:00 -06:00

mm: move vmscan writes and file write accounting to the node As reclaim is now node-based, it follows that page write activity due to page reclaim should also be accounted for on the node. For consistency, also account page writes and page dirtying on a per-node basis. After this patch, there are a few remaining zone counters that may appear strange but are fine. NUMA stats are still per-zone as this is a user-space interface that tools consume. NR_MLOCK, NR_SLAB_*, NR_PAGETABLE, NR_KERNEL_STACK and NR_BOUNCE are all allocations that potentially pin low memory and cannot trivially be reclaimed on demand. This information is still useful for debugging a page allocation failure warning. Link: http://lkml.kernel.org/r/1467970510-21195-21-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:23 -07:00

writeback: attribute stats to the matching per-cgroup bdi_writeback Until now, all WB_* stats were accounted against the root wb (bdi_writeback), now that multiple wb (bdi_writeback) support is in place, let's attributes the stats to the respective per-cgroup wb's. As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:39 -04:00

writeback: implement unlocked_inode_to_wb transaction and use it for stat updates The mechanism for detecting whether an inode should switch its wb (bdi_writeback) association is now in place. This patch build the framework for the actual switching. This patch adds a new inode flag I_WB_SWITCHING, which has two functions. First, the easy one, it ensures that there's only one switching in progress for a give inode. Second, it's used as a mechanism to synchronize wb stat updates. The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters but track the current number of dirty pages and pages under writeback respectively. As such, when an inode is moved from one wb to another, the inode's portion of those stats have to be transferred together; unfortunately, this is a bit tricky as those stat updates are percpu operations which are performed without holding any lock in some places. This patch solves the problem in a similar way as memcg. Each such lockless stat updates are wrapped in transaction surrounded by unlocked_inode_to_wb_begin/end(). During normal operation, they map to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted, mapping->tree_lock is grabbed across the transaction. In turn, the switching path sets I_WB_SWITCHING and waits for a RCU grace period to pass before actually starting to switch, which guarantees that all stat update paths are synchronizing against mapping->tree_lock. This patch still doesn't implement the actual switching. v3: Updated on top of the recent cancel_dirty_page() updates. unlocked_inode_to_wb_begin() now nests inside mem_cgroup_begin_page_stat() to match the locking order. v2: The i_wb access transaction will be used for !stat accesses too. Function names and comments updated accordingly. s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/ s/switch_wb/switch_wbs/ Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-28 14:50:53 -04:00

writeback: fix dirtied pages accounting on redirty De-account the accumulative dirty counters on page redirty. Page redirties (very common in ext4) will introduce mismatch between counters (a) and (b) a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied b) NR_WRITTEN, BDI_WRITTEN This will introduce systematic errors in balanced_rate and result in dirty page position errors (ie. the dirty pages are no longer balanced around the global/bdi setpoints). Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-08-08 15:22:00 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

page_writeback: put account_page_redirty() after set_page_dirty() Helper account_page_redirty() fixes dirty pages counter for redirtied pages. This patch puts it after dirtying and prevents temporary underflows of dirtied pages counters on zone/bdi and current->nr_dirtied. Signed-off-by: Konstantin Khebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-02-11 15:26:55 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

page_writeback: put account_page_redirty() after set_page_dirty() Helper account_page_redirty() fixes dirty pages counter for redirtied pages. This patch puts it after dirtying and prevents temporary underflows of dirtied pages counters on zone/bdi and current->nr_dirtied. Signed-off-by: Konstantin Khebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-02-11 15:26:55 -08:00

writeback: fix dirtied pages accounting on redirty De-account the accumulative dirty counters on page redirty. Page redirties (very common in ext4) will introduce mismatch between counters (a) and (b) a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied b) NR_WRITTEN, BDI_WRITTEN This will introduce systematic errors in balanced_rate and result in dirty page position errors (ie. the dirty pages are no longer balanced around the global/bdi setpoints). Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>

2011-08-08 15:22:00 -06:00

page_writeback: put account_page_redirty() after set_page_dirty() Helper account_page_redirty() fixes dirty pages counter for redirtied pages. This patch puts it after dirtying and prevents temporary underflows of dirtied pages counters on zone/bdi and current->nr_dirtied. Signed-off-by: Konstantin Khebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-02-11 15:26:55 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

HWPOISON: shmem: call set_page_dirty() with locked page The dirtying of page and set_page_dirty() can be moved into the page lock. - In shmem_write_end(), the page was dirtied while the page lock was held, but it's being marked dirty just after dropping the page lock. - In shmem_symlink(), both dirtying and marking can be moved into page lock. It's valuable for the hwpoison code to know whether one bad page can be dropped without losing data. It mainly judges by testing the PG_dirty bit after taking the page lock. So it becomes important that the dirtying of page and the marking of dirtiness are both done inside the page lock. Which is a common practice, but sadly not a rule. The noticeable exceptions are - mapped pages - pages with buffer_heads The above pages could go dirty at any time. Fortunately the hwpoison will unmap the page and release the buffer_heads beforehand anyway. Many other types of pages (eg. metadata pages) can also be dirtied at will by their owners, the hwpoison code cannot do meaningful things to them anyway. Only the dirtiness of pagecache pages owned by regular files are interested. v2: AK: Add comment about set_page_dirty rules (suggested by Peter Zijlstra) Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>

2009-09-16 11:50:14 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: task dirty accounting fix YAMAMOTO-san noticed that task_dirty_inc doesn't seem to be called properly for cases where set_page_dirty is not used to dirty a page (eg. mark_buffer_dirty). Additionally, there is some inconsistency about when task_dirty_inc is called. It is used for dirty balancing, however it even gets called for __set_page_dirty_no_writeback. So rather than increment it in a set_page_dirty wrapper, move it down to exactly where the dirty page accounting stats are incremented. Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-02-18 14:48:18 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

shmem: add huge pages support Here's basic implementation of huge pages support for shmem/tmpfs. It's all pretty streight-forward: - shmem_getpage() allcoates huge page if it can and try to inserd into radix tree with shmem_add_to_page_cache(); - shmem_add_to_page_cache() puts the page onto radix-tree if there's space for it; - shmem_undo_range() removes huge pages, if it fully within range. Partial truncate of huge pages zero out this part of THP. This have visible effect on fallocate(FALLOC_FL_PUNCH_HOLE) behaviour. As we don't really create hole in this case, lseek(SEEK_HOLE) may have inconsistent results depending what pages happened to be allocated. - no need to change shmem_fault: core-mm will map an compound page as huge if VMA is suitable; Link: http://lkml.kernel.org/r/1466021202-61880-30-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-26 15:26:18 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: reclaim invalidated page ASAP invalidate_mapping_pages is very big hint to reclaimer. It means user doesn't want to use the page any more. So in order to prevent working set page eviction, this patch move the page into tail of inactive list by PG_reclaim. Please, remember that pages in inactive list are working set as well as active list. If we don't move pages into inactive list's tail, pages near by tail of inactive list can be evicted although we have a big clue about useless pages. It's totally bad. Now PG_readahead/PG_reclaim is shared. fe3cba17 added ClearPageReclaim into clear_page_dirty_for_io for preventing fast reclaiming readahead marker page. In this series, PG_reclaim is used by invalidated page, too. If VM find the page is invalidated and it's dirty, it sets PG_reclaim to reclaim asap. Then, when the dirty page will be writeback, clear_page_dirty_for_io will clear PG_reclaim unconditionally. It disturbs this serie's goal. I think it's okay to clear PG_readahead when the page is dirty, not writeback time. So this patch moves ClearPageReadahead. In v4, ClearPageReadahead in set_page_dirty has a problem which is reported by Steven Barrett. It's due to compound page. Some driver(ex, audio) calls set_page_dirty with compound page which isn't on LRU. but my patch does ClearPageRelcaim on compound page. In non-CONFIG_PAGEFLAGS_EXTENDED, it breaks PageTail flag. I think it doesn't affect THP and pass my test with THP enabling but Cced Andrea for double check. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Steven Barrett <damentz@liquorix.net> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2011-03-22 16:32:54 -07:00

mm/page-writeback: check-before-clear PageReclaim With the page flag sanitization patchset, an invalid usage of ClearPageReclaim() is detected in set_page_dirty(). This can be called from __unmap_hugepage_range(), so let's check PageReclaim() before trying to clear it to avoid the misuse. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-04-15 16:13:17 -07:00

[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

2006-09-30 20:45:40 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] set_page_dirty() return value fixes We need set_page_dirty() to return true if it actually transitioned the page from a clean to dirty state. This wasn't right in a couple of places. Do a kernel-wide audit, fix things up. This leaves open the possibility of returning a negative errno from set_page_dirty() sometime in the future. But we don't do that at present. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-03-24 03:18:11 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

block: remove per-queue plugging Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

2011-03-10 08:52:07 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

page_writeback: revive cancel_dirty_page() in a restricted form cancel_dirty_page() had some issues and b9ea25152e56 ("page_writeback: clean up mess around cancel_dirty_page()") replaced it with account_page_cleaned() which makes the caller responsible for clearing the dirty bit; unfortunately, the planned changes for cgroup writeback support requires synchronization between dirty bit manipulation and stat updates. While we can open-code such synchronization in each account_page_cleaned() callsite, that's gonna be unnecessarily awkward and verbose. This patch revives cancel_dirty_page() but in a more restricted form. All it does is TestClearPageDirty() followed by account_page_cleaned() invocation if the page was dirty. This helper covers all account_page_cleaned() usages except for __delete_from_page_cache() which is a special case anyway and left alone. As this leaves no module user for account_page_cleaned(), EXPORT_SYMBOL() is dropped from it. This patch just revives cancel_dirty_page() as a trivial wrapper to replace equivalent usages and doesn't introduce any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:15 -04:00

mm: speed up cancel_dirty_page() for clean pages Patch series "Speed up page cache truncation", v1. When rebasing our enterprise distro to a newer kernel (from 4.4 to 4.12) we have noticed a regression in bonnie++ benchmark when deleting files. Eventually we have tracked this down to a fact that page cache truncation got slower by about 10%. There were both gains and losses in the above interval of kernels but we have been able to identify that commit 83929372f629 ("filemap: prepare find and delete operations for huge pages") caused about 10% regression on its own. After some investigation it didn't seem easily possible to fix the regression while maintaining the THP in page cache functionality so we've decided to optimize the page cache truncation path instead to make up for the change. This series is a result of that effort. Patch 1 is an easy speedup of cancel_dirty_page(). Patches 2-6 refactor page cache truncation code so that it is easier to batch radix tree operations. Patch 7 implements batching of deletes from the radix tree which more than makes up for the original regression. This patch (of 7): cancel_dirty_page() does quite some work even for clean pages (fetching of mapping, locking of memcg, atomic bit op on page flags) so it accounts for ~2.5% of cost of truncation of a clean page. That is not much but still dumb for something we don't need at all. Check whether a page is actually dirty and avoid any work if not. Link: http://lkml.kernel.org/r/20171010151937.26984-2-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-15 17:37:11 -08:00

page_writeback: revive cancel_dirty_page() in a restricted form cancel_dirty_page() had some issues and b9ea25152e56 ("page_writeback: clean up mess around cancel_dirty_page()") replaced it with account_page_cleaned() which makes the caller responsible for clearing the dirty bit; unfortunately, the planned changes for cgroup writeback support requires synchronization between dirty bit manipulation and stat updates. While we can open-code such synchronization in each account_page_cleaned() callsite, that's gonna be unnecessarily awkward and verbose. This patch revives cancel_dirty_page() but in a more restricted form. All it does is TestClearPageDirty() followed by account_page_cleaned() invocation if the page was dirty. This helper covers all account_page_cleaned() usages except for __delete_from_page_cache() which is a special case anyway and left alone. As this leaves no module user for account_page_cleaned(), EXPORT_SYMBOL() is dropped from it. This patch just revives cancel_dirty_page() as a trivial wrapper to replace equivalent usages and doesn't introduce any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:15 -04:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

writeback: implement unlocked_inode_to_wb transaction and use it for stat updates The mechanism for detecting whether an inode should switch its wb (bdi_writeback) association is now in place. This patch build the framework for the actual switching. This patch adds a new inode flag I_WB_SWITCHING, which has two functions. First, the easy one, it ensures that there's only one switching in progress for a give inode. Second, it's used as a mechanism to synchronize wb stat updates. The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters but track the current number of dirty pages and pages under writeback respectively. As such, when an inode is moved from one wb to another, the inode's portion of those stats have to be transferred together; unfortunately, this is a bit tricky as those stat updates are percpu operations which are performed without holding any lock in some places. This patch solves the problem in a similar way as memcg. Each such lockless stat updates are wrapped in transaction surrounded by unlocked_inode_to_wb_begin/end(). During normal operation, they map to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted, mapping->tree_lock is grabbed across the transaction. In turn, the switching path sets I_WB_SWITCHING and waits for a RCU grace period to pass before actually starting to switch, which guarantees that all stat update paths are synchronizing against mapping->tree_lock. This patch still doesn't implement the actual switching. v3: Updated on top of the recent cancel_dirty_page() updates. unlocked_inode_to_wb_begin() now nests inside mem_cgroup_begin_page_stat() to match the locking order. v2: The i_wb access transaction will be used for !stat accesses too. Function names and comments updated accordingly. s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/ s/switch_wb/switch_wbs/ Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-28 14:50:53 -04:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

mm: simplify lock_page_memcg() Now that migration doesn't clear page->mem_cgroup of live pages anymore, it's safe to make lock_page_memcg() and the memcg stat functions take pages, and spare the callers from memcg objects. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:22 -07:00

writeback: implement unlocked_inode_to_wb transaction and use it for stat updates The mechanism for detecting whether an inode should switch its wb (bdi_writeback) association is now in place. This patch build the framework for the actual switching. This patch adds a new inode flag I_WB_SWITCHING, which has two functions. First, the easy one, it ensures that there's only one switching in progress for a give inode. Second, it's used as a mechanism to synchronize wb stat updates. The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters but track the current number of dirty pages and pages under writeback respectively. As such, when an inode is moved from one wb to another, the inode's portion of those stats have to be transferred together; unfortunately, this is a bit tricky as those stat updates are percpu operations which are performed without holding any lock in some places. This patch solves the problem in a similar way as memcg. Each such lockless stat updates are wrapped in transaction surrounded by unlocked_inode_to_wb_begin/end(). During normal operation, they map to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted, mapping->tree_lock is grabbed across the transaction. In turn, the switching path sets I_WB_SWITCHING and waits for a RCU grace period to pass before actually starting to switch, which guarantees that all stat update paths are synchronizing against mapping->tree_lock. This patch still doesn't implement the actual switching. v3: Updated on top of the recent cancel_dirty_page() updates. unlocked_inode_to_wb_begin() now nests inside mem_cgroup_begin_page_stat() to match the locking order. v2: The i_wb access transaction will be used for !stat accesses too. Function names and comments updated accordingly. s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/ s/switch_wb/switch_wbs/ Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-28 14:50:53 -04:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

mm: simplify lock_page_memcg() Now that migration doesn't clear page->mem_cgroup of live pages anymore, it's safe to make lock_page_memcg() and the memcg stat functions take pages, and spare the callers from memcg objects. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:22 -07:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

writeback: implement unlocked_inode_to_wb transaction and use it for stat updates The mechanism for detecting whether an inode should switch its wb (bdi_writeback) association is now in place. This patch build the framework for the actual switching. This patch adds a new inode flag I_WB_SWITCHING, which has two functions. First, the easy one, it ensures that there's only one switching in progress for a give inode. Second, it's used as a mechanism to synchronize wb stat updates. The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters but track the current number of dirty pages and pages under writeback respectively. As such, when an inode is moved from one wb to another, the inode's portion of those stats have to be transferred together; unfortunately, this is a bit tricky as those stat updates are percpu operations which are performed without holding any lock in some places. This patch solves the problem in a similar way as memcg. Each such lockless stat updates are wrapped in transaction surrounded by unlocked_inode_to_wb_begin/end(). During normal operation, they map to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted, mapping->tree_lock is grabbed across the transaction. In turn, the switching path sets I_WB_SWITCHING and waits for a RCU grace period to pass before actually starting to switch, which guarantees that all stat update paths are synchronizing against mapping->tree_lock. This patch still doesn't implement the actual switching. v3: Updated on top of the recent cancel_dirty_page() updates. unlocked_inode_to_wb_begin() now nests inside mem_cgroup_begin_page_stat() to match the locking order. v2: The i_wb access transaction will be used for !stat accesses too. Function names and comments updated accordingly. s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/ s/switch_wb/switch_wbs/ Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-28 14:50:53 -04:00

mm: simplify lock_page_memcg() Now that migration doesn't clear page->mem_cgroup of live pages anymore, it's safe to make lock_page_memcg() and the memcg stat functions take pages, and spare the callers from memcg objects. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:22 -07:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

page_writeback: revive cancel_dirty_page() in a restricted form cancel_dirty_page() had some issues and b9ea25152e56 ("page_writeback: clean up mess around cancel_dirty_page()") replaced it with account_page_cleaned() which makes the caller responsible for clearing the dirty bit; unfortunately, the planned changes for cgroup writeback support requires synchronization between dirty bit manipulation and stat updates. While we can open-code such synchronization in each account_page_cleaned() callsite, that's gonna be unnecessarily awkward and verbose. This patch revives cancel_dirty_page() but in a more restricted form. All it does is TestClearPageDirty() followed by account_page_cleaned() invocation if the page was dirty. This helper covers all account_page_cleaned() usages except for __delete_from_page_cache() which is a special case anyway and left alone. As this leaves no module user for account_page_cleaned(), EXPORT_SYMBOL() is dropped from it. This patch just revives cancel_dirty_page() as a trivial wrapper to replace equivalent usages and doesn't introduce any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:15 -04:00

mm: speed up cancel_dirty_page() for clean pages Patch series "Speed up page cache truncation", v1. When rebasing our enterprise distro to a newer kernel (from 4.4 to 4.12) we have noticed a regression in bonnie++ benchmark when deleting files. Eventually we have tracked this down to a fact that page cache truncation got slower by about 10%. There were both gains and losses in the above interval of kernels but we have been able to identify that commit 83929372f629 ("filemap: prepare find and delete operations for huge pages") caused about 10% regression on its own. After some investigation it didn't seem easily possible to fix the regression while maintaining the THP in page cache functionality so we've decided to optimize the page cache truncation path instead to make up for the change. This series is a result of that effort. Patch 1 is an easy speedup of cancel_dirty_page(). Patches 2-6 refactor page cache truncation code so that it is easier to batch radix tree operations. Patch 7 implements batching of deletes from the radix tree which more than makes up for the original regression. This patch (of 7): cancel_dirty_page() does quite some work even for clean pages (fetching of mapping, locking of memcg, atomic bit op on page flags) so it accounts for ~2.5% of cost of truncation of a clean page. That is not much but still dumb for something we don't need at all. Check whether a page is actually dirty and avoid any work if not. Link: http://lkml.kernel.org/r/20171010151937.26984-2-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-11-15 17:37:11 -08:00

page_writeback: revive cancel_dirty_page() in a restricted form cancel_dirty_page() had some issues and b9ea25152e56 ("page_writeback: clean up mess around cancel_dirty_page()") replaced it with account_page_cleaned() which makes the caller responsible for clearing the dirty bit; unfortunately, the planned changes for cgroup writeback support requires synchronization between dirty bit manipulation and stat updates. While we can open-code such synchronization in each account_page_cleaned() callsite, that's gonna be unnecessarily awkward and verbose. This patch revives cancel_dirty_page() but in a more restricted form. All it does is TestClearPageDirty() followed by account_page_cleaned() invocation if the page was dirty. This helper covers all account_page_cleaned() usages except for __delete_from_page_cache() which is a special case anyway and left alone. As this leaves no module user for account_page_cleaned(), EXPORT_SYMBOL() is dropped from it. This patch just revives cancel_dirty_page() as a trivial wrapper to replace equivalent usages and doesn't introduce any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:15 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: fix clear_page_dirty_for_io vs fault race Fix msync data loss and (less importantly) dirty page accounting inaccuracies due to the race remaining in clear_page_dirty_for_io(). The deleted comment explains what the race was, and the added comments explain how it is fixed. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-07-19 01:47:22 -07:00

VM: Fix nasty and subtle race in shared mmap'ed page writeback The VM layer (on the face of it, fairly reasonably) expected that when it does a ->writepage() call to the filesystem, it would write out the full page at that point in time. Especially since it had earlier marked the whole page dirty with "set_page_dirty()". But that isn't actually the case: ->writepage() does not actually write a page, it writes the parts of the page that have been explicitly marked dirty before, *and* that had not got written out for other reasons since the last time we told it they were dirty. That last caveat is the important one. Which _most_ of the time ends up being the whole page (since we had called "set_page_dirty()" on the page earlier), but if the filesystem had done any dirty flushing of its own (for example, to honor some internal write ordering guarantees), it might end up doing only a partial page IO (or none at all) when ->writepage() is actually called. That is the correct thing in general (since we actually often _want_ only the known-dirty parts of the page to be written out), but the shared dirty page handling had implicitly forgotten about these details, and had a number of cases where it was doing just the "->writepage()" part, without telling the low-level filesystem that the whole page might have been re-dirtied as part of being mapped writably into user space. Since most of the time the FS did actually write out the full page, we didn't notice this for a loong time, and this needed some really odd patterns to trigger. But it caused occasional corruption with rtorrent and with the Debian "apt" database, because both use shared mmaps to update the end result. This fixes it. Finally. After way too much hair-pulling. Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by: Martin J. Bligh <mbligh@google.com> Acked-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Martin Johansson <martin@fatbob.nu> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Andrei Popa <andrei.popa@i-neo.ro> Cc: High Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@osdl.org>, Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Gordon Farquharson <gordonfarquharson@gmail.com> Cc: Guillaume Chazarain <guichaz@yahoo.fr> Cc: Theodore Tso <tytso@mit.edu> Cc: Kenneth Cheng <kenneth.w.chen@intel.com> Cc: Tobias Diedrich <ranma@tdiedrich.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-29 10:00:58 -08:00

writeback: implement unlocked_inode_to_wb transaction and use it for stat updates The mechanism for detecting whether an inode should switch its wb (bdi_writeback) association is now in place. This patch build the framework for the actual switching. This patch adds a new inode flag I_WB_SWITCHING, which has two functions. First, the easy one, it ensures that there's only one switching in progress for a give inode. Second, it's used as a mechanism to synchronize wb stat updates. The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters but track the current number of dirty pages and pages under writeback respectively. As such, when an inode is moved from one wb to another, the inode's portion of those stats have to be transferred together; unfortunately, this is a bit tricky as those stat updates are percpu operations which are performed without holding any lock in some places. This patch solves the problem in a similar way as memcg. Each such lockless stat updates are wrapped in transaction surrounded by unlocked_inode_to_wb_begin/end(). During normal operation, they map to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted, mapping->tree_lock is grabbed across the transaction. In turn, the switching path sets I_WB_SWITCHING and waits for a RCU grace period to pass before actually starting to switch, which guarantees that all stat update paths are synchronizing against mapping->tree_lock. This patch still doesn't implement the actual switching. v3: Updated on top of the recent cancel_dirty_page() updates. unlocked_inode_to_wb_begin() now nests inside mem_cgroup_begin_page_stat() to match the locking order. v2: The i_wb access transaction will be used for !stat accesses too. Function names and comments updated accordingly. s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/ s/switch_wb/switch_wbs/ Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-28 14:50:53 -04:00

VM: Fix nasty and subtle race in shared mmap'ed page writeback The VM layer (on the face of it, fairly reasonably) expected that when it does a ->writepage() call to the filesystem, it would write out the full page at that point in time. Especially since it had earlier marked the whole page dirty with "set_page_dirty()". But that isn't actually the case: ->writepage() does not actually write a page, it writes the parts of the page that have been explicitly marked dirty before, *and* that had not got written out for other reasons since the last time we told it they were dirty. That last caveat is the important one. Which _most_ of the time ends up being the whole page (since we had called "set_page_dirty()" on the page earlier), but if the filesystem had done any dirty flushing of its own (for example, to honor some internal write ordering guarantees), it might end up doing only a partial page IO (or none at all) when ->writepage() is actually called. That is the correct thing in general (since we actually often _want_ only the known-dirty parts of the page to be written out), but the shared dirty page handling had implicitly forgotten about these details, and had a number of cases where it was doing just the "->writepage()" part, without telling the low-level filesystem that the whole page might have been re-dirtied as part of being mapped writably into user space. Since most of the time the FS did actually write out the full page, we didn't notice this for a loong time, and this needed some really odd patterns to trigger. But it caused occasional corruption with rtorrent and with the Debian "apt" database, because both use shared mmaps to update the end result. This fixes it. Finally. After way too much hair-pulling. Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by: Martin J. Bligh <mbligh@google.com> Acked-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Martin Johansson <martin@fatbob.nu> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Andrei Popa <andrei.popa@i-neo.ro> Cc: High Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@osdl.org>, Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Gordon Farquharson <gordonfarquharson@gmail.com> Cc: Guillaume Chazarain <guichaz@yahoo.fr> Cc: Theodore Tso <tytso@mit.edu> Cc: Kenneth Cheng <kenneth.w.chen@intel.com> Cc: Tobias Diedrich <ranma@tdiedrich.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-29 10:00:58 -08:00

mm: fix clear_page_dirty_for_io vs fault race Fix msync data loss and (less importantly) dirty page accounting inaccuracies due to the race remaining in clear_page_dirty_for_io(). The deleted comment explains what the race was, and the added comments explain how it is fixed. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-07-19 01:47:22 -07:00

mm: protect set_page_dirty() from ongoing truncation Tejun, while reviewing the code, spotted the following race condition between the dirtying and truncation of a page: __set_page_dirty_nobuffers() __delete_from_page_cache() if (TestSetPageDirty(page)) page->mapping = NULL if (PageDirty()) dec_zone_page_state(page, NR_FILE_DIRTY); dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); if (page->mapping) account_page_dirtied(page) __inc_zone_page_state(page, NR_FILE_DIRTY); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE. Dirtiers usually lock out truncation, either by holding the page lock directly, or in case of zap_pte_range(), by pinning the mapcount with the page table lock held. The notable exception to this rule, though, is do_wp_page(), for which this race exists. However, do_wp_page() already waits for a locked page to unlock before setting the dirty bit, in order to prevent a race where clear_page_dirty() misses the page bit in the presence of dirty ptes. Upgrade that wait to a fully locked set_page_dirty() to also cover the situation explained above. Afterwards, the code in set_page_dirty() dealing with a truncation race is no longer needed. Remove it. Reported-by: Tejun Heo <tj@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2015-01-08 14:32:18 -08:00

mm: fix clear_page_dirty_for_io vs fault race Fix msync data loss and (less importantly) dirty page accounting inaccuracies due to the race remaining in clear_page_dirty_for_io(). The deleted comment explains what the race was, and the added comments explain how it is fixed. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-07-19 01:47:22 -07:00

writeback: implement unlocked_inode_to_wb transaction and use it for stat updates The mechanism for detecting whether an inode should switch its wb (bdi_writeback) association is now in place. This patch build the framework for the actual switching. This patch adds a new inode flag I_WB_SWITCHING, which has two functions. First, the easy one, it ensures that there's only one switching in progress for a give inode. Second, it's used as a mechanism to synchronize wb stat updates. The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters but track the current number of dirty pages and pages under writeback respectively. As such, when an inode is moved from one wb to another, the inode's portion of those stats have to be transferred together; unfortunately, this is a bit tricky as those stat updates are percpu operations which are performed without holding any lock in some places. This patch solves the problem in a similar way as memcg. Each such lockless stat updates are wrapped in transaction surrounded by unlocked_inode_to_wb_begin/end(). During normal operation, they map to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted, mapping->tree_lock is grabbed across the transaction. In turn, the switching path sets I_WB_SWITCHING and waits for a RCU grace period to pass before actually starting to switch, which guarantees that all stat update paths are synchronizing against mapping->tree_lock. This patch still doesn't implement the actual switching. v3: Updated on top of the recent cancel_dirty_page() updates. unlocked_inode_to_wb_begin() now nests inside mem_cgroup_begin_page_stat() to match the locking order. v2: The i_wb access transaction will be used for !stat accesses too. Function names and comments updated accordingly. s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/ s/switch_wb/switch_wbs/ Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-28 14:50:53 -04:00

VM: Fix nasty and subtle race in shared mmap'ed page writeback The VM layer (on the face of it, fairly reasonably) expected that when it does a ->writepage() call to the filesystem, it would write out the full page at that point in time. Especially since it had earlier marked the whole page dirty with "set_page_dirty()". But that isn't actually the case: ->writepage() does not actually write a page, it writes the parts of the page that have been explicitly marked dirty before, *and* that had not got written out for other reasons since the last time we told it they were dirty. That last caveat is the important one. Which _most_ of the time ends up being the whole page (since we had called "set_page_dirty()" on the page earlier), but if the filesystem had done any dirty flushing of its own (for example, to honor some internal write ordering guarantees), it might end up doing only a partial page IO (or none at all) when ->writepage() is actually called. That is the correct thing in general (since we actually often _want_ only the known-dirty parts of the page to be written out), but the shared dirty page handling had implicitly forgotten about these details, and had a number of cases where it was doing just the "->writepage()" part, without telling the low-level filesystem that the whole page might have been re-dirtied as part of being mapped writably into user space. Since most of the time the FS did actually write out the full page, we didn't notice this for a loong time, and this needed some really odd patterns to trigger. But it caused occasional corruption with rtorrent and with the Debian "apt" database, because both use shared mmaps to update the end result. This fixes it. Finally. After way too much hair-pulling. Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by: Martin J. Bligh <mbligh@google.com> Acked-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Martin Johansson <martin@fatbob.nu> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Andrei Popa <andrei.popa@i-neo.ro> Cc: High Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@osdl.org>, Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Gordon Farquharson <gordonfarquharson@gmail.com> Cc: Guillaume Chazarain <guichaz@yahoo.fr> Cc: Theodore Tso <tytso@mit.edu> Cc: Kenneth Cheng <kenneth.w.chen@intel.com> Cc: Tobias Diedrich <ranma@tdiedrich.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-29 10:00:58 -08:00

mm: memcontrol: per-lruvec stats infrastructure lruvecs are at the intersection of the NUMA node and memcg, which is the scope for most paging activity. Introduce a convenient accounting infrastructure that maintains statistics per node, per memcg, and the lruvec itself. Then convert over accounting sites for statistics that are already tracked in both nodes and memcgs and can be easily switched. [hannes@cmpxchg.org: fix crash in the new cgroup stat keeping code] Link: http://lkml.kernel.org/r/20170531171450.GA10481@cmpxchg.org [hannes@cmpxchg.org: don't track uncharged pages at all Link: http://lkml.kernel.org/r/20170605175254.GA8547@cmpxchg.org [hannes@cmpxchg.org: add missing free_percpu()] Link: http://lkml.kernel.org/r/20170605175354.GB8547@cmpxchg.org [linux@roeck-us.net: hexagon: fix build error caused by include file order] Link: http://lkml.kernel.org/r/20170617153721.GA4382@roeck-us.net Link: http://lkml.kernel.org/r/20170530181724.27197-6-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-07-06 15:40:52 -07:00

mm: remove reclaim and compaction retry approximations If per-zone LRU accounting is available then there is no point approximating whether reclaim and compaction should retry based on pgdat statistics. This is effectively a revert of "mm, vmstat: remove zone and node double accounting by approximating retries" with the difference that inactive/active stats are still available. This preserves the history of why the approximation was retried and why it had to be reverted to handle OOM kills on 32-bit systems. Link: http://lkml.kernel.org/r/1469110261-7365-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:47:31 -07:00

writeback: implement unlocked_inode_to_wb transaction and use it for stat updates The mechanism for detecting whether an inode should switch its wb (bdi_writeback) association is now in place. This patch build the framework for the actual switching. This patch adds a new inode flag I_WB_SWITCHING, which has two functions. First, the easy one, it ensures that there's only one switching in progress for a give inode. Second, it's used as a mechanism to synchronize wb stat updates. The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters but track the current number of dirty pages and pages under writeback respectively. As such, when an inode is moved from one wb to another, the inode's portion of those stats have to be transferred together; unfortunately, this is a bit tricky as those stat updates are percpu operations which are performed without holding any lock in some places. This patch solves the problem in a similar way as memcg. Each such lockless stat updates are wrapped in transaction surrounded by unlocked_inode_to_wb_begin/end(). During normal operation, they map to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted, mapping->tree_lock is grabbed across the transaction. In turn, the switching path sets I_WB_SWITCHING and waits for a RCU grace period to pass before actually starting to switch, which guarantees that all stat update paths are synchronizing against mapping->tree_lock. This patch still doesn't implement the actual switching. v3: Updated on top of the recent cancel_dirty_page() updates. unlocked_inode_to_wb_begin() now nests inside mem_cgroup_begin_page_stat() to match the locking order. v2: The i_wb access transaction will be used for !stat accesses too. Function names and comments updated accordingly. s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/ s/switch_wb/switch_wbs/ Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-28 14:50:53 -04:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

writeback: implement unlocked_inode_to_wb transaction and use it for stat updates The mechanism for detecting whether an inode should switch its wb (bdi_writeback) association is now in place. This patch build the framework for the actual switching. This patch adds a new inode flag I_WB_SWITCHING, which has two functions. First, the easy one, it ensures that there's only one switching in progress for a give inode. Second, it's used as a mechanism to synchronize wb stat updates. The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters but track the current number of dirty pages and pages under writeback respectively. As such, when an inode is moved from one wb to another, the inode's portion of those stats have to be transferred together; unfortunately, this is a bit tricky as those stat updates are percpu operations which are performed without holding any lock in some places. This patch solves the problem in a similar way as memcg. Each such lockless stat updates are wrapped in transaction surrounded by unlocked_inode_to_wb_begin/end(). During normal operation, they map to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted, mapping->tree_lock is grabbed across the transaction. In turn, the switching path sets I_WB_SWITCHING and waits for a RCU grace period to pass before actually starting to switch, which guarantees that all stat update paths are synchronizing against mapping->tree_lock. This patch still doesn't implement the actual switching. v3: Updated on top of the recent cancel_dirty_page() updates. unlocked_inode_to_wb_begin() now nests inside mem_cgroup_begin_page_stat() to match the locking order. v2: The i_wb access transaction will be used for !stat accesses too. Function names and comments updated accordingly. s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/ s/switch_wb/switch_wbs/ Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-28 14:50:53 -04:00

memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:16 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

VM: Fix nasty and subtle race in shared mmap'ed page writeback The VM layer (on the face of it, fairly reasonably) expected that when it does a ->writepage() call to the filesystem, it would write out the full page at that point in time. Especially since it had earlier marked the whole page dirty with "set_page_dirty()". But that isn't actually the case: ->writepage() does not actually write a page, it writes the parts of the page that have been explicitly marked dirty before, *and* that had not got written out for other reasons since the last time we told it they were dirty. That last caveat is the important one. Which _most_ of the time ends up being the whole page (since we had called "set_page_dirty()" on the page earlier), but if the filesystem had done any dirty flushing of its own (for example, to honor some internal write ordering guarantees), it might end up doing only a partial page IO (or none at all) when ->writepage() is actually called. That is the correct thing in general (since we actually often _want_ only the known-dirty parts of the page to be written out), but the shared dirty page handling had implicitly forgotten about these details, and had a number of cases where it was doing just the "->writepage()" part, without telling the low-level filesystem that the whole page might have been re-dirtied as part of being mapped writably into user space. Since most of the time the FS did actually write out the full page, we didn't notice this for a loong time, and this needed some really odd patterns to trigger. But it caused occasional corruption with rtorrent and with the Debian "apt" database, because both use shared mmaps to update the end result. This fixes it. Finally. After way too much hair-pulling. Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by: Martin J. Bligh <mbligh@google.com> Acked-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Martin Johansson <martin@fatbob.nu> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Andrei Popa <andrei.popa@i-neo.ro> Cc: High Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@osdl.org>, Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Gordon Farquharson <gordonfarquharson@gmail.com> Cc: Guillaume Chazarain <guichaz@yahoo.fr> Cc: Theodore Tso <tytso@mit.edu> Cc: Kenneth Cheng <kenneth.w.chen@intel.com> Cc: Tobias Diedrich <ranma@tdiedrich.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-29 10:00:58 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] re-export clear_page_dirty_for_io() 2.6.14 has this exported, and reiser4 (at least) uses it. Put things back the way they were. Signed-off-by: Vladimir V. Saveliev <vs@namesys.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-11-18 01:10:53 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: memcontrol: fix NULL pointer crash in test_clear_page_writeback() Jaegeuk and Brad report a NULL pointer crash when writeback ending tries to update the memcg stats: BUG: unable to handle kernel NULL pointer dereference at 00000000000003b0 IP: test_clear_page_writeback+0x12e/0x2c0 [...] RIP: 0010:test_clear_page_writeback+0x12e/0x2c0 Call Trace: <IRQ> end_page_writeback+0x47/0x70 f2fs_write_end_io+0x76/0x180 [f2fs] bio_endio+0x9f/0x120 blk_update_request+0xa8/0x2f0 scsi_end_request+0x39/0x1d0 scsi_io_completion+0x211/0x690 scsi_finish_command+0xd9/0x120 scsi_softirq_done+0x127/0x150 __blk_mq_complete_request_remote+0x13/0x20 flush_smp_call_function_queue+0x56/0x110 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x27/0x40 call_function_single_interrupt+0x89/0x90 RIP: 0010:native_safe_halt+0x6/0x10 (gdb) l *(test_clear_page_writeback+0x12e) 0xffffffff811bae3e is in test_clear_page_writeback (./include/linux/memcontrol.h:619). 614 mod_node_page_state(page_pgdat(page), idx, val); 615 if (mem_cgroup_disabled() || !page->mem_cgroup) 616 return; 617 mod_memcg_state(page->mem_cgroup, idx, val); 618 pn = page->mem_cgroup->nodeinfo[page_to_nid(page)]; 619 this_cpu_add(pn->lruvec_stat->count[idx], val); 620 } 621 622 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order, 623 gfp_t gfp_mask, The issue is that writeback doesn't hold a page reference and the page might get freed after PG_writeback is cleared (and the mapping is unlocked) in test_clear_page_writeback(). The stat functions looking up the page's node or zone are safe, as those attributes are static across allocation and free cycles. But page->mem_cgroup is not, and it will get cleared if we race with truncation or migration. It appears this race window has been around for a while, but less likely to trigger when the memcg stats were updated first thing after PG_writeback is cleared. Recent changes reshuffled this code to update the global node stats before the memcg ones, though, stretching the race window out to an extent where people can reproduce the problem. Update test_clear_page_writeback() to look up and pin page->mem_cgroup before clearing PG_writeback, then not use that pointer afterward. It is a partial revert of 62cccb8c8e7a ("mm: simplify lock_page_memcg()") but leaves the pageref-holding callsites that aren't affected alone. Link: http://lkml.kernel.org/r/20170809183825.GA26387@cmpxchg.org Fixes: 62cccb8c8e7a ("mm: simplify lock_page_memcg()") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Jaegeuk Kim <jaegeuk@kernel.org> Tested-by: Jaegeuk Kim <jaegeuk@kernel.org> Reported-by: Bradley Bolen <bradleybolen@gmail.com> Tested-by: Brad Bolen <bradleybolen@gmail.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-08-18 15:15:48 -07:00

mm: memcontrol: fix missed end-writeback page accounting Commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API") changed page migration to uncharge the old page right away. The page is locked, unmapped, truncated, and off the LRU, but it could race with writeback ending, which then doesn't unaccount the page properly: test_clear_page_writeback() migration wait_on_page_writeback() TestClearPageWriteback() mem_cgroup_migrate() clear PCG_USED mem_cgroup_update_page_stat() if (PageCgroupUsed(pc)) decrease memcg pages under writeback release pc->mem_cgroup->move_lock The per-page statistics interface is heavily optimized to avoid a function call and a lookup_page_cgroup() in the file unmap fast path, which means it doesn't verify whether a page is still charged before clearing PageWriteback() and it has to do it in the stat update later. Rework it so that it looks up the page's memcg once at the beginning of the transaction and then uses it throughout. The charge will be verified before clearing PageWriteback() and migration can't uncharge the page as long as that is still set. The RCU lock will protect the memcg past uncharge. As far as losing the optimization goes, the following test results are from a microbenchmark that maps, faults, and unmaps a 4GB sparse file three times in a nested fashion, so that there are two negative passes that don't account but still go through the new transaction overhead. There is no actual difference: old: 33.195102545 seconds time elapsed ( +- 0.01% ) new: 33.199231369 seconds time elapsed ( +- 0.03% ) The time spent in page_remove_rmap()'s callees still adds up to the same, but the time spent in the function itself seems reduced: # Children Self Command Shared Object Symbol old: 0.12% 0.11% filemapstress [kernel.kallsyms] [k] page_remove_rmap new: 0.12% 0.08% filemapstress [kernel.kallsyms] [k] page_remove_rmap Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: <stable@vger.kernel.org> [3.17.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-10-29 14:50:48 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: memcontrol: fix NULL pointer crash in test_clear_page_writeback() Jaegeuk and Brad report a NULL pointer crash when writeback ending tries to update the memcg stats: BUG: unable to handle kernel NULL pointer dereference at 00000000000003b0 IP: test_clear_page_writeback+0x12e/0x2c0 [...] RIP: 0010:test_clear_page_writeback+0x12e/0x2c0 Call Trace: <IRQ> end_page_writeback+0x47/0x70 f2fs_write_end_io+0x76/0x180 [f2fs] bio_endio+0x9f/0x120 blk_update_request+0xa8/0x2f0 scsi_end_request+0x39/0x1d0 scsi_io_completion+0x211/0x690 scsi_finish_command+0xd9/0x120 scsi_softirq_done+0x127/0x150 __blk_mq_complete_request_remote+0x13/0x20 flush_smp_call_function_queue+0x56/0x110 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x27/0x40 call_function_single_interrupt+0x89/0x90 RIP: 0010:native_safe_halt+0x6/0x10 (gdb) l *(test_clear_page_writeback+0x12e) 0xffffffff811bae3e is in test_clear_page_writeback (./include/linux/memcontrol.h:619). 614 mod_node_page_state(page_pgdat(page), idx, val); 615 if (mem_cgroup_disabled() || !page->mem_cgroup) 616 return; 617 mod_memcg_state(page->mem_cgroup, idx, val); 618 pn = page->mem_cgroup->nodeinfo[page_to_nid(page)]; 619 this_cpu_add(pn->lruvec_stat->count[idx], val); 620 } 621 622 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order, 623 gfp_t gfp_mask, The issue is that writeback doesn't hold a page reference and the page might get freed after PG_writeback is cleared (and the mapping is unlocked) in test_clear_page_writeback(). The stat functions looking up the page's node or zone are safe, as those attributes are static across allocation and free cycles. But page->mem_cgroup is not, and it will get cleared if we race with truncation or migration. It appears this race window has been around for a while, but less likely to trigger when the memcg stats were updated first thing after PG_writeback is cleared. Recent changes reshuffled this code to update the global node stats before the memcg ones, though, stretching the race window out to an extent where people can reproduce the problem. Update test_clear_page_writeback() to look up and pin page->mem_cgroup before clearing PG_writeback, then not use that pointer afterward. It is a partial revert of 62cccb8c8e7a ("mm: simplify lock_page_memcg()") but leaves the pageref-holding callsites that aren't affected alone. Link: http://lkml.kernel.org/r/20170809183825.GA26387@cmpxchg.org Fixes: 62cccb8c8e7a ("mm: simplify lock_page_memcg()") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Jaegeuk Kim <jaegeuk@kernel.org> Tested-by: Jaegeuk Kim <jaegeuk@kernel.org> Reported-by: Bradley Bolen <bradleybolen@gmail.com> Tested-by: Brad Bolen <bradleybolen@gmail.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-08-18 15:15:48 -07:00

mm: don't use radix tree writeback tags for pages in swap cache File pages use a set of radix tree tags (DIRTY, TOWRITE, WRITEBACK, etc.) to accelerate finding the pages with a specific tag in the radix tree during inode writeback. But for anonymous pages in the swap cache, there is no inode writeback. So there is no need to find the pages with some writeback tags in the radix tree. It is not necessary to touch radix tree writeback tags for pages in the swap cache. Per Rik van Riel's suggestion, a new flag AS_NO_WRITEBACK_TAGS is introduced for address spaces which don't need to update the writeback tags. The flag is set for swap caches. It may be used for DAX file systems, etc. With this patch, the swap out bandwidth improved 22.3% (from ~1.2GB/s to ~1.48GBps) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. The improvement comes from the reduced contention on the swap cache radix tree lock. To test sequential swapping out, the test case uses 8 processes, which sequentially allocate and write to the anonymous pages until RAM and part of the swap device is used up. Details of comparison is as follow, base base+patch ---------------- -------------------------- %stddev %change %stddev \ | \ 2506952 Â± 2% +28.1% 3212076 Â± 7% vm-scalability.throughput 1207402 Â± 7% +22.3% 1476578 Â± 6% vmstat.swap.so 10.86 Â± 12% -23.4% 8.31 Â± 16% perf-profile.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list 10.82 Â± 13% -33.1% 7.24 Â± 14% perf-profile.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_zone_memcg 10.36 Â± 11% -100.0% 0.00 Â± -1% perf-profile.cycles-pp._raw_spin_lock_irqsave.__test_set_page_writeback.bdev_write_page.__swap_writepage.swap_writepage 10.52 Â± 12% -100.0% 0.00 Â± -1% perf-profile.cycles-pp._raw_spin_lock_irqsave.test_clear_page_writeback.end_page_writeback.page_endio.pmem_rw_page Link: http://lkml.kernel.org/r/1472578089-5560-1-git-send-email-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tejun Heo <tj@kernel.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-10-07 16:59:30 -07:00

writeback: attribute stats to the matching per-cgroup bdi_writeback Until now, all WB_* stats were accounted against the root wb (bdi_writeback), now that multiple wb (bdi_writeback) support is in place, let's attributes the stats to the respective per-cgroup wb's. As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:39 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: spinlock tree_lock mapping->tree_lock has no read lockers. convert the lock from an rwlock to a spinlock. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-07-25 19:45:32 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: count writeback pages per BDI Count per BDI writeback pages. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:48 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: bdi: add separate writeback accounting capability Add a new BDI capability flag: BDI_CAP_NO_ACCT_WB. If this flag is set, then don't update the per-bdi writeback stats from test_set_page_writeback() and test_clear_page_writeback(). Misc cleanups: - convert bdi_cap_writeback_dirty() and friends to static inline functions - create a flag that includes all three dirty/writeback related flags, since almst all users will want to have them toghether Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:37 -07:00

writeback: attribute stats to the matching per-cgroup bdi_writeback Until now, all WB_* stats were accounted against the root wb (bdi_writeback), now that multiple wb (bdi_writeback) support is in place, let's attributes the stats to the respective per-cgroup wb's. As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:39 -04:00

writeback: rework wb_[dec|inc]_stat family of functions Currently the writeback statistics code uses a percpu counters to hold various statistics. Furthermore we have 2 families of functions - those which disable local irq and those which doesn't and whose names begin with double underscore. However, they both end up calling __add_wb_stats which in turn calls percpu_counter_add_batch which is already irq-safe. Exploiting this fact allows to eliminated the __wb_* functions since they don't add any further protection than we already have. Furthermore, refactor the wb_* function to call __add_wb_stat directly without the irq-disabling dance. This will likely result in better runtime of code which deals with modifying the stat counters. While at it also document why percpu_counter_add_batch is in fact preempt and irq-safe since at least 3 people got confused. Link: http://lkml.kernel.org/r/1498029937-27293-1-git-send-email-nborisov@suse.com Signed-off-by: Nikolay Borisov <nborisov@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Josef Bacik <jbacik@fb.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-07-12 14:37:51 -07:00

writeback: attribute stats to the matching per-cgroup bdi_writeback Until now, all WB_* stats were accounted against the root wb (bdi_writeback), now that multiple wb (bdi_writeback) support is in place, let's attributes the stats to the respective per-cgroup wb's. As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:39 -04:00

mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:50 -07:00

mm: count writeback pages per BDI Count per BDI writeback pages. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:48 -07:00

fs/fs-writeback.c: add a new writeback list for sync wait_sb_inodes() currently does a walk of all inodes in the filesystem to find dirty one to wait on during sync. This is highly inefficient and wastes a lot of CPU when there are lots of clean cached inodes that we don't need to wait on. To avoid this "all inode" walk, we need to track inodes that are currently under writeback that we need to wait for. We do this by adding inodes to a writeback list on the sb when the mapping is first tagged as having pages under writeback. wait_sb_inodes() can then walk this list of "inodes under IO" and wait specifically just for the inodes that the current sync(2) needs to wait for. Define a couple helpers to add/remove an inode from the writeback list and call them when the overall mapping is tagged for or cleared from writeback. Update wait_sb_inodes() to walk only the inodes under writeback due to the sync. With this change, filesystem sync times are significantly reduced for fs' with largely populated inode caches and otherwise no other work to do. For example, on a 16xcpu 2GHz x86-64 server, 10TB XFS filesystem with a ~10m entry inode cache, sync times are reduced from ~7.3s to less than 0.1s when the filesystem is fully clean. Link: http://lkml.kernel.org/r/1466594593-6757-2-git-send-email-bfoster@redhat.com Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Holger Hoffstätte <holger.hoffstaette@applied-asynchrony.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-26 15:21:50 -07:00

mm: spinlock tree_lock mapping->tree_lock has no read lockers. convert the lock from an rwlock to a spinlock. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-07-25 19:45:32 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: memcontrol: fix NULL pointer crash in test_clear_page_writeback() Jaegeuk and Brad report a NULL pointer crash when writeback ending tries to update the memcg stats: BUG: unable to handle kernel NULL pointer dereference at 00000000000003b0 IP: test_clear_page_writeback+0x12e/0x2c0 [...] RIP: 0010:test_clear_page_writeback+0x12e/0x2c0 Call Trace: <IRQ> end_page_writeback+0x47/0x70 f2fs_write_end_io+0x76/0x180 [f2fs] bio_endio+0x9f/0x120 blk_update_request+0xa8/0x2f0 scsi_end_request+0x39/0x1d0 scsi_io_completion+0x211/0x690 scsi_finish_command+0xd9/0x120 scsi_softirq_done+0x127/0x150 __blk_mq_complete_request_remote+0x13/0x20 flush_smp_call_function_queue+0x56/0x110 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x27/0x40 call_function_single_interrupt+0x89/0x90 RIP: 0010:native_safe_halt+0x6/0x10 (gdb) l *(test_clear_page_writeback+0x12e) 0xffffffff811bae3e is in test_clear_page_writeback (./include/linux/memcontrol.h:619). 614 mod_node_page_state(page_pgdat(page), idx, val); 615 if (mem_cgroup_disabled() || !page->mem_cgroup) 616 return; 617 mod_memcg_state(page->mem_cgroup, idx, val); 618 pn = page->mem_cgroup->nodeinfo[page_to_nid(page)]; 619 this_cpu_add(pn->lruvec_stat->count[idx], val); 620 } 621 622 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order, 623 gfp_t gfp_mask, The issue is that writeback doesn't hold a page reference and the page might get freed after PG_writeback is cleared (and the mapping is unlocked) in test_clear_page_writeback(). The stat functions looking up the page's node or zone are safe, as those attributes are static across allocation and free cycles. But page->mem_cgroup is not, and it will get cleared if we race with truncation or migration. It appears this race window has been around for a while, but less likely to trigger when the memcg stats were updated first thing after PG_writeback is cleared. Recent changes reshuffled this code to update the global node stats before the memcg ones, though, stretching the race window out to an extent where people can reproduce the problem. Update test_clear_page_writeback() to look up and pin page->mem_cgroup before clearing PG_writeback, then not use that pointer afterward. It is a partial revert of 62cccb8c8e7a ("mm: simplify lock_page_memcg()") but leaves the pageref-holding callsites that aren't affected alone. Link: http://lkml.kernel.org/r/20170809183825.GA26387@cmpxchg.org Fixes: 62cccb8c8e7a ("mm: simplify lock_page_memcg()") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Jaegeuk Kim <jaegeuk@kernel.org> Tested-by: Jaegeuk Kim <jaegeuk@kernel.org> Reported-by: Bradley Bolen <bradleybolen@gmail.com> Tested-by: Brad Bolen <bradleybolen@gmail.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-08-18 15:15:48 -07:00

writeback: account NR_WRITTEN at IO completion time NR_WRITTEN is now accounted at block IO enqueue time, which is not very accurate as to common understanding. This moves NR_WRITTEN accounting to the IO completion time and makes it more consistent with BDI_WRITTEN, which is used for bandwidth estimation. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Michael Rubin <mrubin@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2011-07-25 17:12:37 -07:00

mm: memcontrol: fix NULL pointer crash in test_clear_page_writeback() Jaegeuk and Brad report a NULL pointer crash when writeback ending tries to update the memcg stats: BUG: unable to handle kernel NULL pointer dereference at 00000000000003b0 IP: test_clear_page_writeback+0x12e/0x2c0 [...] RIP: 0010:test_clear_page_writeback+0x12e/0x2c0 Call Trace: <IRQ> end_page_writeback+0x47/0x70 f2fs_write_end_io+0x76/0x180 [f2fs] bio_endio+0x9f/0x120 blk_update_request+0xa8/0x2f0 scsi_end_request+0x39/0x1d0 scsi_io_completion+0x211/0x690 scsi_finish_command+0xd9/0x120 scsi_softirq_done+0x127/0x150 __blk_mq_complete_request_remote+0x13/0x20 flush_smp_call_function_queue+0x56/0x110 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x27/0x40 call_function_single_interrupt+0x89/0x90 RIP: 0010:native_safe_halt+0x6/0x10 (gdb) l *(test_clear_page_writeback+0x12e) 0xffffffff811bae3e is in test_clear_page_writeback (./include/linux/memcontrol.h:619). 614 mod_node_page_state(page_pgdat(page), idx, val); 615 if (mem_cgroup_disabled() || !page->mem_cgroup) 616 return; 617 mod_memcg_state(page->mem_cgroup, idx, val); 618 pn = page->mem_cgroup->nodeinfo[page_to_nid(page)]; 619 this_cpu_add(pn->lruvec_stat->count[idx], val); 620 } 621 622 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order, 623 gfp_t gfp_mask, The issue is that writeback doesn't hold a page reference and the page might get freed after PG_writeback is cleared (and the mapping is unlocked) in test_clear_page_writeback(). The stat functions looking up the page's node or zone are safe, as those attributes are static across allocation and free cycles. But page->mem_cgroup is not, and it will get cleared if we race with truncation or migration. It appears this race window has been around for a while, but less likely to trigger when the memcg stats were updated first thing after PG_writeback is cleared. Recent changes reshuffled this code to update the global node stats before the memcg ones, though, stretching the race window out to an extent where people can reproduce the problem. Update test_clear_page_writeback() to look up and pin page->mem_cgroup before clearing PG_writeback, then not use that pointer afterward. It is a partial revert of 62cccb8c8e7a ("mm: simplify lock_page_memcg()") but leaves the pageref-holding callsites that aren't affected alone. Link: http://lkml.kernel.org/r/20170809183825.GA26387@cmpxchg.org Fixes: 62cccb8c8e7a ("mm: simplify lock_page_memcg()") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Jaegeuk Kim <jaegeuk@kernel.org> Tested-by: Jaegeuk Kim <jaegeuk@kernel.org> Reported-by: Bradley Bolen <bradleybolen@gmail.com> Tested-by: Brad Bolen <bradleybolen@gmail.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-08-18 15:15:48 -07:00

mm: remove reclaim and compaction retry approximations If per-zone LRU accounting is available then there is no point approximating whether reclaim and compaction should retry based on pgdat statistics. This is effectively a revert of "mm, vmstat: remove zone and node double accounting by approximating retries" with the difference that inactive/active stats are still available. This preserves the history of why the approximation was retried and why it had to be reverted to handle OOM kills on 32-bit systems. Link: http://lkml.kernel.org/r/1469110261-7365-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:47:31 -07:00

mm: move vmscan writes and file write accounting to the node As reclaim is now node-based, it follows that page write activity due to page reclaim should also be accounted for on the node. For consistency, also account page writes and page dirtying on a per-node basis. After this patch, there are a few remaining zone counters that may appear strange but are fine. NUMA stats are still per-zone as this is a user-space interface that tools consume. NR_MLOCK, NR_SLAB_*, NR_PAGETABLE, NR_KERNEL_STACK and NR_BOUNCE are all allocations that potentially pin low memory and cannot trivially be reclaimed on demand. This information is still useful for debugging a page allocation failure warning. Link: http://lkml.kernel.org/r/1467970510-21195-21-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:46:23 -07:00

writeback: account NR_WRITTEN at IO completion time NR_WRITTEN is now accounted at block IO enqueue time, which is not very accurate as to common understanding. This moves NR_WRITTEN accounting to the IO completion time and makes it more consistent with BDI_WRITTEN, which is used for bandwidth estimation. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Michael Rubin <mrubin@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2011-07-25 17:12:37 -07:00

mm: memcontrol: fix NULL pointer crash in test_clear_page_writeback() Jaegeuk and Brad report a NULL pointer crash when writeback ending tries to update the memcg stats: BUG: unable to handle kernel NULL pointer dereference at 00000000000003b0 IP: test_clear_page_writeback+0x12e/0x2c0 [...] RIP: 0010:test_clear_page_writeback+0x12e/0x2c0 Call Trace: <IRQ> end_page_writeback+0x47/0x70 f2fs_write_end_io+0x76/0x180 [f2fs] bio_endio+0x9f/0x120 blk_update_request+0xa8/0x2f0 scsi_end_request+0x39/0x1d0 scsi_io_completion+0x211/0x690 scsi_finish_command+0xd9/0x120 scsi_softirq_done+0x127/0x150 __blk_mq_complete_request_remote+0x13/0x20 flush_smp_call_function_queue+0x56/0x110 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x27/0x40 call_function_single_interrupt+0x89/0x90 RIP: 0010:native_safe_halt+0x6/0x10 (gdb) l *(test_clear_page_writeback+0x12e) 0xffffffff811bae3e is in test_clear_page_writeback (./include/linux/memcontrol.h:619). 614 mod_node_page_state(page_pgdat(page), idx, val); 615 if (mem_cgroup_disabled() || !page->mem_cgroup) 616 return; 617 mod_memcg_state(page->mem_cgroup, idx, val); 618 pn = page->mem_cgroup->nodeinfo[page_to_nid(page)]; 619 this_cpu_add(pn->lruvec_stat->count[idx], val); 620 } 621 622 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order, 623 gfp_t gfp_mask, The issue is that writeback doesn't hold a page reference and the page might get freed after PG_writeback is cleared (and the mapping is unlocked) in test_clear_page_writeback(). The stat functions looking up the page's node or zone are safe, as those attributes are static across allocation and free cycles. But page->mem_cgroup is not, and it will get cleared if we race with truncation or migration. It appears this race window has been around for a while, but less likely to trigger when the memcg stats were updated first thing after PG_writeback is cleared. Recent changes reshuffled this code to update the global node stats before the memcg ones, though, stretching the race window out to an extent where people can reproduce the problem. Update test_clear_page_writeback() to look up and pin page->mem_cgroup before clearing PG_writeback, then not use that pointer afterward. It is a partial revert of 62cccb8c8e7a ("mm: simplify lock_page_memcg()") but leaves the pageref-holding callsites that aren't affected alone. Link: http://lkml.kernel.org/r/20170809183825.GA26387@cmpxchg.org Fixes: 62cccb8c8e7a ("mm: simplify lock_page_memcg()") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Jaegeuk Kim <jaegeuk@kernel.org> Tested-by: Jaegeuk Kim <jaegeuk@kernel.org> Reported-by: Bradley Bolen <bradleybolen@gmail.com> Tested-by: Brad Bolen <bradleybolen@gmail.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-08-18 15:15:48 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ext4: fix data integrity sync in ordered mode When we perform a data integrity sync we tag all the dirty pages with PAGECACHE_TAG_TOWRITE at start of ext4_da_writepages. Later we check for this tag in write_cache_pages_da and creates a struct mpage_da_data containing contiguously indexed pages tagged with this tag and sync these pages with a call to mpage_da_map_and_submit. This process is done in while loop until all the PAGECACHE_TAG_TOWRITE pages are synced. We also do journal start and stop in each iteration. journal_stop could initiate journal commit which would call ext4_writepage which in turn will call ext4_bio_write_page even for delayed OR unwritten buffers. When ext4_bio_write_page is called for such buffers, even though it does not sync them but it clears the PAGECACHE_TAG_TOWRITE of the corresponding page and hence these pages are also not synced by the currently running data integrity sync. We will end up with dirty pages although sync is completed. This could cause a potential data loss when the sync call is followed by a truncate_pagecache call, which is exactly the case in collapse_range. (It will cause generic/127 failure in xfstests) To avoid this issue, we can use set_page_writeback_keepwrite instead of set_page_writeback, which doesn't clear TOWRITE tag. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>

2014-05-12 08:12:25 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: memcontrol: fix missed end-writeback page accounting Commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API") changed page migration to uncharge the old page right away. The page is locked, unmapped, truncated, and off the LRU, but it could race with writeback ending, which then doesn't unaccount the page properly: test_clear_page_writeback() migration wait_on_page_writeback() TestClearPageWriteback() mem_cgroup_migrate() clear PCG_USED mem_cgroup_update_page_stat() if (PageCgroupUsed(pc)) decrease memcg pages under writeback release pc->mem_cgroup->move_lock The per-page statistics interface is heavily optimized to avoid a function call and a lookup_page_cgroup() in the file unmap fast path, which means it doesn't verify whether a page is still charged before clearing PageWriteback() and it has to do it in the stat update later. Rework it so that it looks up the page's memcg once at the beginning of the transaction and then uses it throughout. The charge will be verified before clearing PageWriteback() and migration can't uncharge the page as long as that is still set. The RCU lock will protect the memcg past uncharge. As far as losing the optimization goes, the following test results are from a microbenchmark that maps, faults, and unmaps a 4GB sparse file three times in a nested fashion, so that there are two negative passes that don't account but still go through the new transaction overhead. There is no actual difference: old: 33.195102545 seconds time elapsed ( +- 0.01% ) new: 33.199231369 seconds time elapsed ( +- 0.03% ) The time spent in page_remove_rmap()'s callees still adds up to the same, but the time spent in the function itself seems reduced: # Children Self Command Shared Object Symbol old: 0.12% 0.11% filemapstress [kernel.kallsyms] [k] page_remove_rmap new: 0.12% 0.08% filemapstress [kernel.kallsyms] [k] page_remove_rmap Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: <stable@vger.kernel.org> [3.17.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-10-29 14:50:48 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: simplify lock_page_memcg() Now that migration doesn't clear page->mem_cgroup of live pages anymore, it's safe to make lock_page_memcg() and the memcg stat functions take pages, and spare the callers from memcg objects. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:22 -07:00

mm: don't use radix tree writeback tags for pages in swap cache File pages use a set of radix tree tags (DIRTY, TOWRITE, WRITEBACK, etc.) to accelerate finding the pages with a specific tag in the radix tree during inode writeback. But for anonymous pages in the swap cache, there is no inode writeback. So there is no need to find the pages with some writeback tags in the radix tree. It is not necessary to touch radix tree writeback tags for pages in the swap cache. Per Rik van Riel's suggestion, a new flag AS_NO_WRITEBACK_TAGS is introduced for address spaces which don't need to update the writeback tags. The flag is set for swap caches. It may be used for DAX file systems, etc. With this patch, the swap out bandwidth improved 22.3% (from ~1.2GB/s to ~1.48GBps) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. The improvement comes from the reduced contention on the swap cache radix tree lock. To test sequential swapping out, the test case uses 8 processes, which sequentially allocate and write to the anonymous pages until RAM and part of the swap device is used up. Details of comparison is as follow, base base+patch ---------------- -------------------------- %stddev %change %stddev \ | \ 2506952 Â± 2% +28.1% 3212076 Â± 7% vm-scalability.throughput 1207402 Â± 7% +22.3% 1476578 Â± 6% vmstat.swap.so 10.86 Â± 12% -23.4% 8.31 Â± 16% perf-profile.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list 10.82 Â± 13% -33.1% 7.24 Â± 14% perf-profile.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_zone_memcg 10.36 Â± 11% -100.0% 0.00 Â± -1% perf-profile.cycles-pp._raw_spin_lock_irqsave.__test_set_page_writeback.bdev_write_page.__swap_writepage.swap_writepage 10.52 Â± 12% -100.0% 0.00 Â± -1% perf-profile.cycles-pp._raw_spin_lock_irqsave.test_clear_page_writeback.end_page_writeback.page_endio.pmem_rw_page Link: http://lkml.kernel.org/r/1472578089-5560-1-git-send-email-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tejun Heo <tj@kernel.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-10-07 16:59:30 -07:00

writeback: attribute stats to the matching per-cgroup bdi_writeback Until now, all WB_* stats were accounted against the root wb (bdi_writeback), now that multiple wb (bdi_writeback) support is in place, let's attributes the stats to the respective per-cgroup wb's. As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-05-22 17:13:39 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: spinlock tree_lock mapping->tree_lock has no read lockers. convert the lock from an rwlock to a spinlock. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-07-25 19:45:32 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: count writeback pages per BDI Count per BDI writeback pages. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:48 -07:00

fs/fs-writeback.c: add a new writeback list for sync wait_sb_inodes() currently does a walk of all inodes in the filesystem to find dirty one to wait on during sync. This is highly inefficient and wastes a lot of CPU when there are lots of clean cached inodes that we don't need to wait on. To avoid this "all inode" walk, we need to track inodes that are currently under writeback that we need to wait for. We do this by adding inodes to a writeback list on the sb when the mapping is first tagged as having pages under writeback. wait_sb_inodes() can then walk this list of "inodes under IO" and wait specifically just for the inodes that the current sync(2) needs to wait for. Define a couple helpers to add/remove an inode from the writeback list and call them when the overall mapping is tagged for or cleared from writeback. Update wait_sb_inodes() to walk only the inodes under writeback due to the sync. With this change, filesystem sync times are significantly reduced for fs' with largely populated inode caches and otherwise no other work to do. For example, on a 16xcpu 2GHz x86-64 server, 10TB XFS filesystem with a ~10m entry inode cache, sync times are reduced from ~7.3s to less than 0.1s when the filesystem is fully clean. Link: http://lkml.kernel.org/r/1466594593-6757-2-git-send-email-bfoster@redhat.com Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Holger Hoffstätte <holger.hoffstaette@applied-asynchrony.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-26 15:21:50 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: bdi: add separate writeback accounting capability Add a new BDI capability flag: BDI_CAP_NO_ACCT_WB. If this flag is set, then don't update the per-bdi writeback stats from test_set_page_writeback() and test_clear_page_writeback(). Misc cleanups: - convert bdi_cap_writeback_dirty() and friends to static inline functions - create a flag that includes all three dirty/writeback related flags, since almst all users will want to have them toghether Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:54:37 -07:00

writeback: rework wb_[dec|inc]_stat family of functions Currently the writeback statistics code uses a percpu counters to hold various statistics. Furthermore we have 2 families of functions - those which disable local irq and those which doesn't and whose names begin with double underscore. However, they both end up calling __add_wb_stats which in turn calls percpu_counter_add_batch which is already irq-safe. Exploiting this fact allows to eliminated the __wb_* functions since they don't add any further protection than we already have. Furthermore, refactor the wb_* function to call __add_wb_stat directly without the irq-disabling dance. This will likely result in better runtime of code which deals with modifying the stat counters. While at it also document why percpu_counter_add_batch is in fact preempt and irq-safe since at least 3 people got confused. Link: http://lkml.kernel.org/r/1498029937-27293-1-git-send-email-nborisov@suse.com Signed-off-by: Nikolay Borisov <nborisov@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Josef Bacik <jbacik@fb.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-07-12 14:37:51 -07:00

fs/fs-writeback.c: add a new writeback list for sync wait_sb_inodes() currently does a walk of all inodes in the filesystem to find dirty one to wait on during sync. This is highly inefficient and wastes a lot of CPU when there are lots of clean cached inodes that we don't need to wait on. To avoid this "all inode" walk, we need to track inodes that are currently under writeback that we need to wait for. We do this by adding inodes to a writeback list on the sb when the mapping is first tagged as having pages under writeback. wait_sb_inodes() can then walk this list of "inodes under IO" and wait specifically just for the inodes that the current sync(2) needs to wait for. Define a couple helpers to add/remove an inode from the writeback list and call them when the overall mapping is tagged for or cleared from writeback. Update wait_sb_inodes() to walk only the inodes under writeback due to the sync. With this change, filesystem sync times are significantly reduced for fs' with largely populated inode caches and otherwise no other work to do. For example, on a 16xcpu 2GHz x86-64 server, 10TB XFS filesystem with a ~10m entry inode cache, sync times are reduced from ~7.3s to less than 0.1s when the filesystem is fully clean. Link: http://lkml.kernel.org/r/1466594593-6757-2-git-send-email-bfoster@redhat.com Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Holger Hoffstätte <holger.hoffstaette@applied-asynchrony.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-26 15:21:50 -07:00

mm: count writeback pages per BDI Count per BDI writeback pages. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:25:48 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ext4: fix data integrity sync in ordered mode When we perform a data integrity sync we tag all the dirty pages with PAGECACHE_TAG_TOWRITE at start of ext4_da_writepages. Later we check for this tag in write_cache_pages_da and creates a struct mpage_da_data containing contiguously indexed pages tagged with this tag and sync these pages with a call to mpage_da_map_and_submit. This process is done in while loop until all the PAGECACHE_TAG_TOWRITE pages are synced. We also do journal start and stop in each iteration. journal_stop could initiate journal commit which would call ext4_writepage which in turn will call ext4_bio_write_page even for delayed OR unwritten buffers. When ext4_bio_write_page is called for such buffers, even though it does not sync them but it clears the PAGECACHE_TAG_TOWRITE of the corresponding page and hence these pages are also not synced by the currently running data integrity sync. We will end up with dirty pages although sync is completed. This could cause a potential data loss when the sync call is followed by a truncate_pagecache call, which is exactly the case in collapse_range. (It will cause generic/127 failure in xfstests) To avoid this issue, we can use set_page_writeback_keepwrite instead of set_page_writeback, which doesn't clear TOWRITE tag. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>

2014-05-12 08:12:25 -04:00

mm: spinlock tree_lock mapping->tree_lock has no read lockers. convert the lock from an rwlock to a spinlock. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-07-25 19:45:32 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: page-writeback: inline account_page_dirtied() into single caller A follow-up patch would have changed the call signature. To save the trouble, just fold it instead. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: <stable@vger.kernel.org> [3.17.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-10-29 14:50:46 -07:00

mm: memcontrol: per-lruvec stats infrastructure lruvecs are at the intersection of the NUMA node and memcg, which is the scope for most paging activity. Introduce a convenient accounting infrastructure that maintains statistics per node, per memcg, and the lruvec itself. Then convert over accounting sites for statistics that are already tracked in both nodes and memcgs and can be easily switched. [hannes@cmpxchg.org: fix crash in the new cgroup stat keeping code] Link: http://lkml.kernel.org/r/20170531171450.GA10481@cmpxchg.org [hannes@cmpxchg.org: don't track uncharged pages at all Link: http://lkml.kernel.org/r/20170605175254.GA8547@cmpxchg.org [hannes@cmpxchg.org: add missing free_percpu()] Link: http://lkml.kernel.org/r/20170605175354.GB8547@cmpxchg.org [linux@roeck-us.net: hexagon: fix build error caused by include file order] Link: http://lkml.kernel.org/r/20170617153721.GA4382@roeck-us.net Link: http://lkml.kernel.org/r/20170530181724.27197-6-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2017-07-06 15:40:52 -07:00

mm: remove reclaim and compaction retry approximations If per-zone LRU accounting is available then there is no point approximating whether reclaim and compaction should retry based on pgdat statistics. This is effectively a revert of "mm, vmstat: remove zone and node double accounting by approximating retries" with the difference that inactive/active stats are still available. This preserves the history of why the approximation was retried and why it had to be reverted to handle OOM kills on 32-bit systems. Link: http://lkml.kernel.org/r/1469110261-7365-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-07-28 15:47:31 -07:00

mm: page-writeback: inline account_page_dirtied() into single caller A follow-up patch would have changed the call signature. To save the trouble, just fold it instead. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: <stable@vger.kernel.org> [3.17.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2014-10-29 14:50:46 -07:00

mm: simplify lock_page_memcg() Now that migration doesn't clear page->mem_cgroup of live pages anymore, it's safe to make lock_page_memcg() and the memcg stat functions take pages, and spare the callers from memcg objects. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-03-15 14:57:22 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ext4: fix data integrity sync in ordered mode When we perform a data integrity sync we tag all the dirty pages with PAGECACHE_TAG_TOWRITE at start of ext4_da_writepages. Later we check for this tag in write_cache_pages_da and creates a struct mpage_da_data containing contiguously indexed pages tagged with this tag and sync these pages with a call to mpage_da_map_and_submit. This process is done in while loop until all the PAGECACHE_TAG_TOWRITE pages are synced. We also do journal start and stop in each iteration. journal_stop could initiate journal commit which would call ext4_writepage which in turn will call ext4_bio_write_page even for delayed OR unwritten buffers. When ext4_bio_write_page is called for such buffers, even though it does not sync them but it clears the PAGECACHE_TAG_TOWRITE of the corresponding page and hence these pages are also not synced by the currently running data integrity sync. We will end up with dirty pages although sync is completed. This could cause a potential data loss when the sync call is followed by a truncate_pagecache call, which is exactly the case in collapse_range. (It will cause generic/127 failure in xfstests) To avoid this issue, we can use set_page_writeback_keepwrite instead of set_page_writeback, which doesn't clear TOWRITE tag. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>

2014-05-12 08:12:25 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: use lockless radix-tree probe Probing pages and radix_tree_tagged are lockless operations with the lockless radix-tree. Convert these users to RCU locking rather than using tree_lock. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 01:24:40 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: remove useless rcu lock-unlock from mapping_tagged() radix_tree_tagged() is lockless - it reads from a member of the raid-tree root node. It does not require any protection. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2011-07-25 17:12:31 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mm: only enforce stable page writes if the backing device requires it Create a helper function to check if a backing device requires stable page writes and, if so, performs the necessary wait. Then, make it so that all points in the memory manager that handle making pages writable use the helper function. This should provide stable page write support to most filesystems, while eliminating unnecessary waiting for devices that don't require the feature. Before this patchset, all filesystems would block, regardless of whether or not it was necessary. ext3 would wait, but still generate occasional checksum errors. The network filesystems were left to do their own thing, so they'd wait too. After this patchset, all the disk filesystems except ext3 and btrfs will wait only if the hardware requires it. ext3 (if necessary) snapshots pages instead of blocking, and btrfs provides its own bdi so the mm will never wait. Network filesystems haven't been touched, so either they provide their own stable page guarantees or they don't block at all. The blocking behavior is back to what it was before 3.0 if you don't have a disk requiring stable page writes. Here's the result of using dbench to test latency on ext2: 3.8.0-rc3: Operation Count AvgLat MaxLat ---------------------------------------- WriteX 109347 0.028 59.817 ReadX 347180 0.004 3.391 Flush 15514 29.828 287.283 Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms 3.8.0-rc3 + patches: WriteX 105556 0.029 4.273 ReadX 335004 0.005 4.112 Flush 14982 30.540 298.634 Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms As you can see, the maximum write latency drops considerably with this patch enabled. The other filesystems (ext3/ext4/xfs/btrfs) behave similarly, but see the cover letter for those results. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-02-21 16:42:51 -08:00

fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info Now that we got rid of the bdi abuse on character devices we can always use sb->s_bdi to get at the backing_dev_info for a file, except for the block device special case. Export inode_to_bdi and replace uses of mapping->backing_dev_info with it to prepare for the removal of mapping->backing_dev_info. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>

2015-01-14 10:42:36 +01:00

mm: only enforce stable page writes if the backing device requires it Create a helper function to check if a backing device requires stable page writes and, if so, performs the necessary wait. Then, make it so that all points in the memory manager that handle making pages writable use the helper function. This should provide stable page write support to most filesystems, while eliminating unnecessary waiting for devices that don't require the feature. Before this patchset, all filesystems would block, regardless of whether or not it was necessary. ext3 would wait, but still generate occasional checksum errors. The network filesystems were left to do their own thing, so they'd wait too. After this patchset, all the disk filesystems except ext3 and btrfs will wait only if the hardware requires it. ext3 (if necessary) snapshots pages instead of blocking, and btrfs provides its own bdi so the mm will never wait. Network filesystems haven't been touched, so either they provide their own stable page guarantees or they don't block at all. The blocking behavior is back to what it was before 3.0 if you don't have a disk requiring stable page writes. Here's the result of using dbench to test latency on ext2: 3.8.0-rc3: Operation Count AvgLat MaxLat ---------------------------------------- WriteX 109347 0.028 59.817 ReadX 347180 0.004 3.391 Flush 15514 29.828 287.283 Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms 3.8.0-rc3 + patches: WriteX 105556 0.029 4.273 ReadX 335004 0.005 4.112 Flush 14982 30.540 298.634 Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms As you can see, the maximum write latency drops considerably with this patch enabled. The other filesystems (ext3/ext4/xfs/btrfs) behave similarly, but see the cover letter for those results. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2013-02-21 16:42:51 -08:00

2836 lines 84 KiB Raw Permalink Normal View History

2836 lines

84 KiB

Raw Permalink Normal View History