kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-26 18:16:26 +00:00
Code Issues Releases Packages Activity
linux/drivers/block/floppy.c

4983 lines
126 KiB
Raw Permalink Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: relocate devfs comment Signed-off-by: James Nelson <james4765@gmail.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-11-08 16:52:12 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: DPRINT neatening Move DPRINT macro definition above 1st use Consolidate a format string (>80 columns) Add a newline to an unterminated message Comment neatened Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:05 -08:00
drivers/block/floppy.c: add debug_dcl(...) macro Converted #ifdef DCL_DEBUG if (test) DPRINTK(...); #endif to debug_dcl(test, ...); Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] drivers/block/*: use time_after() and friends They deal with wrapping correctly and are nicer to read. Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 01:56:44 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Create platform_device.h to contain all the platform device details. Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29 19:07:23 +01:00
floppy: provide a PNP device table in the module. The missing device table means that the floppy module is not auto-loaded, even when the appropriate PNP device (0700) is found. We don't actually use the table in the module, since the device doesn't have a struct pnp_driver, but it's sufficient to cause an alias in the module that udev/modprobe will use. Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Philippe De Muyter <phdm@macqel.be> Acked-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 16:56:47 -07:00
[PATCH] sem2mutex: drivers/block/floppy.c Convert from semaphore to mutex. Untested as I have no access to a floppy drive at the moment. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 03:00:26 -08:00
drivers/block/floppy.c: convert some #include <asm/ to #include <linux/ Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:44 -08:00
floppy: Run floppy initialization asynchronous floppy_init is quite slow, 3s on my test system to determine that there is no floppy. Run it asynchronous to the other init calls to improve boot time. [jkosina@suse.cz: fix modular build] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-02 17:27:04 -07:00
take floppy compat ioctls to sodding floppy.c all other drivers recognizing those ioctls are very much *not* biarch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-27 15:47:56 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 14:28:52 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 14:55:46 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
floppy: switch to one queue per drive instead of sharing a queue Pretty straight forward conversion. Note that we do round-robin between the drives that have available requests, before we simply used the drive that the IO scheduler told us to. Since the IO scheduler doesn't care about multiple devices per queue, the resulting sort would not have made sense. Fixed by Vivek to get rid of a double lock problem in set_next_request() Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
2010-09-22 09:32:36 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: consolidate the dummy fd_cacheflush definition Only mips defines this helper, so remove all the other arch definitions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-07-13 16:12:05 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int initialising to bool initialized Don't initialize initialized either. Default is false. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: DPRINT neatening Move DPRINT macro definition above 1st use Consolidate a format string (>80 columns) Add a newline to an unterminated message Comment neatened Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:05 -08:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] sem2mutex: drivers/block/floppy.c Convert from semaphore to mutex. Untested as I have no access to a floppy drive at the moment. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 03:00:26 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: switch to one queue per drive instead of sharing a queue Pretty straight forward conversion. Note that we do round-robin between the drives that have available requests, before we simply used the drive that the IO scheduler told us to. Since the IO scheduler doesn't care about multiple devices per queue, the resulting sort would not have made sense. Fixed by Vivek to get rid of a double lock problem in set_next_request() Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
2010-09-22 09:32:36 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: support arbitrary first-sector numbers The current floppy_struct allows floppies to number sectors starting from 0 or 1. This patch allows arbitrary first-sector numbers - for example, 0xC1 for Amstrad CPC disks. This extends the existing 1-bit field (FD_ZEROBASED, bit 2 of stretch) to 8 bits (FD_SECTMASK, bits 2 to 9). Currently 0x00 denotes a first sector number of 1, and 0x01 denotes a first sector number of 0. We extend this by interpreting FD_SECTMASK as the first sector number with the LSB flipped. Signed-off-by: Keith Wansbrough <keith@lochan.org> Cc: Alain Knaff <alain@linux.lu> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-22 14:57:17 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] Floppy: Add cmos attribute to floppy driver Currently only a device 'fdX' shows up in sysfs; the other possible device for this drive (like fd0h1440 etc) must be guessed from there. This patch corrects the floppy driver to create a platform device for each floppy found; each platform device also has an attribute 'cmos' which represents the cmos type for this drive. From this attribute the other possible device types can be computed. From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-15 10:09:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
floppy: make controller const The struct cont_t is just a set of virtual function pointers. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-20 20:09:00 -06:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: request and release only the ports we actually use The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: Adam M Belay <abelay@mit.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 14:48:36 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use atomic type for usage_count The usage_count was being protected by a lock which was only there to create an atomic counter. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: replace NO_GEOM macro with a function This patch replaces the NO_GEOM macro with a proper static inline function and converts an open-coded caller in check_floppy_change() to use it. Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-08 14:44:34 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use __func__ where appropriate Add and use __func__ to is_alive. Use __func__ in some DPRINTs. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:06 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: move leading && and || to preceding line Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
drivers/block/floppy.c: use __func__ where appropriate Add and use __func__ to is_alive. Use __func__ in some DPRINTs. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:06 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary argument from [__]reschedule_timeout Prior to patch "drivers/block/floppy.c: Use pr_<level>" only reschedule_timeout(,"request done"...) printed a numeric value after a reschedule_timeout event message. Restore that behavior and remove the now unnecessary argument. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Off by one in floppy.c Another coverity patch i forgot to resend, original thread here http://marc.info/?l=linux-kernel&m=115144559823592&w=2 In case drive == N_DRIVE, we get one past the drive_params array. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 13:58:15 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
workqueue: use mod_delayed_work() instead of __cancel + queue Now that mod_delayed_work() is safe to call from IRQ handlers, __cancel_delayed_work() followed by queue_delayed_work() can be replaced with mod_delayed_work(). Most conversions are straight-forward except for the following. * net/core/link_watch.c: linkwatch_schedule_work() was doing a quite elaborate dancing around its delayed_work. Collapse it such that linkwatch_work is queued for immediate execution if LW_URGENT and existing timer is kept otherwise. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-08-21 13:18:24 -07:00
drivers/block/floppy.c: remove unnecessary braces Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
drivers/block/floppy.c: remove unnecessary argument from [__]reschedule_timeout Prior to patch "drivers/block/floppy.c: Use pr_<level>" only reschedule_timeout(,"request done"...) printed a numeric value after a reschedule_timeout event message. Restore that behavior and remove the now unnecessary argument. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary argument from [__]reschedule_timeout Prior to patch "drivers/block/floppy.c: Use pr_<level>" only reschedule_timeout(,"request done"...) printed a numeric value after a reschedule_timeout event message. Restore that behavior and remove the now unnecessary argument. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary argument from [__]reschedule_timeout Prior to patch "drivers/block/floppy.c: Use pr_<level>" only reschedule_timeout(,"request done"...) printed a numeric value after a reschedule_timeout event message. Restore that behavior and remove the now unnecessary argument. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
[PATCH] drivers/block/*: use time_after() and friends They deal with wrapping correctly and are nicer to read. Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 01:56:44 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add debug_dcl(...) macro Converted #ifdef DCL_DEBUG if (test) DPRINTK(...); #endif to debug_dcl(test, ...); Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: DPRINT neatening Move DPRINT macro definition above 1st use Consolidate a format string (>80 columns) Add a newline to an unterminated message Comment neatened Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:05 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add function is_ready_state Used a couple of times, might simplify the code a bit. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove register keyword use from floppy driver The floppy drive is slow. These days I see absolutely no good reason why the floppy driver should try to gain a tiny bit of speed by telling gcc to optimize access to some variables via the register keyword. Better to just leave gcc free to do whatever optimizations it deduces to be sane and not hamper it by telling it that some variables in the floppy driver are special and need to be fast (they don't). Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:58 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add debug_dcl(...) macro Converted #ifdef DCL_DEBUG if (test) DPRINTK(...); #endif to debug_dcl(test, ...); Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add function is_ready_state Used a couple of times, might simplify the code a bit. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use wait_event_interruptible Convert wait loops to use wait_event_ macros. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use wait_event_interruptible Convert wait loops to use wait_event_ macros. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove unnecessary inlines These routines are all big enough that is better to let the compiler decide to inline or not. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
workqueue: deprecate __cancel_delayed_work() Now that cancel_delayed_work() can be safely called from IRQ handlers, there's no reason to use __cancel_delayed_work(). Use cancel_delayed_work() instead of __cancel_delayed_work() and mark the latter deprecated. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Roland Dreier <roland@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-08-21 13:18:24 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block/floppy: Convert callback to pass timer_list In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to passing in the timer pointer explicitly. Calculate the drive from the offset of the timer in the timer list. Cc: Jiri Kosina <jikos@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Geliang Tang <geliangtang@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-04 17:49:29 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block/floppy: Convert callback to pass timer_list In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to passing in the timer pointer explicitly. Calculate the drive from the offset of the timer in the timer list. Cc: Jiri Kosina <jikos@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Geliang Tang <geliangtang@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-04 17:49:29 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block/floppy: Convert callback to pass timer_list In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to passing in the timer pointer explicitly. Calculate the drive from the offset of the timer in the timer list. Cc: Jiri Kosina <jikos@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Geliang Tang <geliangtang@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-04 17:49:29 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove register keyword use from floppy driver The floppy drive is slow. These days I see absolutely no good reason why the floppy driver should try to gain a tiny bit of speed by telling gcc to optimize access to some variables via the register keyword. Better to just leave gcc free to do whatever optimizations it deduces to be sane and not hamper it by telling it that some variables in the floppy driver are special and need to be fast (they don't). Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:58 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add debug_dcl(...) macro Converted #ifdef DCL_DEBUG if (test) DPRINTK(...); #endif to debug_dcl(test, ...); Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int initialising to bool initialized Don't initialize initialized either. Default is false. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add function is_ready_state Used a couple of times, might simplify the code a bit. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int initialising to bool initialized Don't initialize initialized either. Default is false. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int initialising to bool initialized Don't initialize initialized either. Default is false. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add function is_ready_state Used a couple of times, might simplify the code a bit. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add function is_ready_state Used a couple of times, might simplify the code a bit. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove unnecessary inlines These routines are all big enough that is better to let the compiler decide to inline or not. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: comment neatening and remove naked ; Spacing, column alignment and a for loop with a naked semicolon converted to an assign and while Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block: Use DIV_ROUND_UP The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-22 14:57:16 -07:00
drivers/block/floppy.c: remove unnecessary braces Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary braces Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block: Use DIV_ROUND_UP The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-22 14:57:16 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block: Use DIV_ROUND_UP The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-22 14:57:16 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: DPRINT neatening Move DPRINT macro definition above 1st use Consolidate a format string (>80 columns) Add a newline to an unterminated message Comment neatened Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:05 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] drivers/block/*: use time_after() and friends They deal with wrapping correctly and are nicer to read. Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 01:56:44 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add debug_dcl(...) macro Converted #ifdef DCL_DEBUG if (test) DPRINTK(...); #endif to debug_dcl(test, ...); Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:54 -08:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
drivers/block/floppy.c: add debug_dcl(...) macro Converted #ifdef DCL_DEBUG if (test) DPRINTK(...); #endif to debug_dcl(test, ...); Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove LAST_OUT macro Macros with hidden returns are not nice. Convert the 2 uses to use direct code. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:49 -08:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add debug_dcl(...) macro Converted #ifdef DCL_DEBUG if (test) DPRINTK(...); #endif to debug_dcl(test, ...); Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 14:55:46 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
drivers/block/floppy.c: use %pf in logging messages Print the function name not the pointer address where useful and possible Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:07 -08:00
drivers/block/floppy.c: use __func__ where appropriate Add and use __func__ to is_alive. Use __func__ in some DPRINTs. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:06 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int initialising to bool initialized Don't initialize initialized either. Default is false. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: move leading && and || to preceding line Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use __func__ where appropriate Add and use __func__ to is_alive. Use __func__ in some DPRINTs. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:06 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary return and braces Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:01 -08:00
drivers/block/floppy.c: remove LAST_OUT macro Macros with hidden returns are not nice. Convert the 2 uses to use direct code. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:49 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use %pf in logging messages Print the function name not the pointer address where useful and possible Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:07 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
drivers/block/floppy.c: use %pf in logging messages Print the function name not the pointer address where useful and possible Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:07 -08:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use %pf in logging messages Print the function name not the pointer address where useful and possible Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:07 -08:00
WorkStruct: Merge the pending bit into the wq_data pointer Reclaim a word from the size of the work_struct by folding the pending bit and the wq_data pointer together. This shouldn't cause misalignment problems as all pointers should be at least 4-byte aligned. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:54:49 +00:00
drivers/block/floppy.c: use %pf in logging messages Print the function name not the pointer address where useful and possible Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:07 -08:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int initialising to bool initialized Don't initialize initialized either. Default is false. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int initialising to bool initialized Don't initialize initialized either. Default is false. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use __func__ where appropriate Add and use __func__ to is_alive. Use __func__ in some DPRINTs. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:06 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
floppy: don't use PREPARE_[DELAYED_]WORK PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. floppy has been multiplexing floppy_work and fd_timer with multiple work functions. Introduce floppy_work_workfn() and fd_timer_workfn() which invoke floppy_work_fn and fd_timer_fn respectively and always use the two functions as the work functions and update the users to set floppy_work_fn and fd_timer_fn instead of overriding work functions using PREPARE_[DELAYED_]WORK(). It would probably be best to route this with other related updates through the workqueue tree. Lightly tested using qemu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz>
2014-03-07 10:24:48 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove used once CHECK_READY macro Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:47 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add debug_dcl(...) macro Converted #ifdef DCL_DEBUG if (test) DPRINTK(...); #endif to debug_dcl(test, ...); Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: comment neatening and remove naked ; Spacing, column alignment and a for loop with a naked semicolon converted to an assign and while Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary argument from [__]reschedule_timeout Prior to patch "drivers/block/floppy.c: Use pr_<level>" only reschedule_timeout(,"request done"...) printed a numeric value after a reschedule_timeout event message. Restore that behavior and remove the now unnecessary argument. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add debug_dcl(...) macro Converted #ifdef DCL_DEBUG if (test) DPRINTK(...); #endif to debug_dcl(test, ...); Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:54 -08:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary argument from [__]reschedule_timeout Prior to patch "drivers/block/floppy.c: Use pr_<level>" only reschedule_timeout(,"request done"...) printed a numeric value after a reschedule_timeout event message. Restore that behavior and remove the now unnecessary argument. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: make controller const The struct cont_t is just a set of virtual function pointers. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-20 20:09:00 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: make controller const The struct cont_t is just a set of virtual function pointers. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-20 20:09:00 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use wait_event_interruptible Convert wait loops to use wait_event_ macros. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: support arbitrary first-sector numbers The current floppy_struct allows floppies to number sectors starting from 0 or 1. This patch allows arbitrary first-sector numbers - for example, 0xC1 for Amstrad CPC disks. This extends the existing 1-bit field (FD_ZEROBASED, bit 2 of stretch) to 8 bits (FD_SECTMASK, bits 2 to 9). Currently 0x00 denotes a first sector number of 1, and 0x01 denotes a first sector number of 0. We extend this by interpreting FD_SECTMASK as the first sector number with the LSB flipped. Signed-off-by: Keith Wansbrough <keith@lochan.org> Cc: Alain Knaff <alain@linux.lu> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-22 14:57:17 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: support arbitrary first-sector numbers The current floppy_struct allows floppies to number sectors starting from 0 or 1. This patch allows arbitrary first-sector numbers - for example, 0xC1 for Amstrad CPC disks. This extends the existing 1-bit field (FD_ZEROBASED, bit 2 of stretch) to 8 bits (FD_SECTMASK, bits 2 to 9). Currently 0x00 denotes a first sector number of 1, and 0x01 denotes a first sector number of 0. We extend this by interpreting FD_SECTMASK as the first sector number with the LSB flipped. Signed-off-by: Keith Wansbrough <keith@lochan.org> Cc: Alain Knaff <alain@linux.lu> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-22 14:57:17 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: make controller const The struct cont_t is just a set of virtual function pointers. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-20 20:09:00 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
drivers/block/floppy.c: remove macros CALL, WAIT and IWAIT Obfuscating macros with embedded returns are not nice Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:57 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: introduce new block status code type Currently we use nornal Linux errno values in the block layer, and while we accept any error a few have overloaded magic meanings. This patch instead introduces a new blk_status_t value that holds block layer specific status codes and explicitly explains their meaning. Helpers to convert from and to the previous special meanings are provided for now, but I suspect we want to get rid of them in the long run - those drivers that have a errno input (e.g. networking) usually get errnos that don't know about the special block layer overloads, and similarly returning them to userspace will usually return somethings that strictly speaking isn't correct for file system operations, but that's left as an exercise for later. For now the set of errors is a very limited set that closely corresponds to the previous overloaded errno values, but there is some low hanging fruite to improve it. blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse typechecking, so that we can easily catch places passing the wrong values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:04 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blk_end_request: changing floppy (take 4) This patch converts floppy to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. As a result, the interface of internal function, floppy_end_request(), is changed. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blk_end_request: changing floppy (take 4) This patch converts floppy to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. As a result, the interface of internal function, floppy_end_request(), is changed. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:21 +01:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
blk_end_request: changing floppy (take 4) This patch converts floppy to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. As a result, the interface of internal function, floppy_end_request(), is changed. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blk_end_request: changing floppy (take 4) This patch converts floppy to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. As a result, the interface of internal function, floppy_end_request(), is changed. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: switch to one queue per drive instead of sharing a queue Pretty straight forward conversion. Note that we do round-robin between the drives that have available requests, before we simply used the drive that the IO scheduler told us to. Since the IO scheduler doesn't care about multiple devices per queue, the resulting sort would not have made sense. Fixed by Vivek to get rid of a double lock problem in set_next_request() Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
2010-09-22 09:32:36 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary argument from [__]reschedule_timeout Prior to patch "drivers/block/floppy.c: Use pr_<level>" only reschedule_timeout(,"request done"...) printed a numeric value after a reschedule_timeout event message. Restore that behavior and remove the now unnecessary argument. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary argument from [__]reschedule_timeout Prior to patch "drivers/block/floppy.c: Use pr_<level>" only reschedule_timeout(,"request done"...) printed a numeric value after a reschedule_timeout event message. Restore that behavior and remove the now unnecessary argument. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: switch to one queue per drive instead of sharing a queue Pretty straight forward conversion. Note that we do round-robin between the drives that have available requests, before we simply used the drive that the IO scheduler told us to. Since the IO scheduler doesn't care about multiple devices per queue, the resulting sort would not have made sense. Fixed by Vivek to get rid of a double lock problem in set_next_request() Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
2010-09-22 09:32:36 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blk_end_request: changing floppy (take 4) This patch converts floppy to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. As a result, the interface of internal function, floppy_end_request(), is changed. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:21 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: introduce new block status code type Currently we use nornal Linux errno values in the block layer, and while we accept any error a few have overloaded magic meanings. This patch instead introduces a new blk_status_t value that holds block layer specific status codes and explicitly explains their meaning. Helpers to convert from and to the previous special meanings are provided for now, but I suspect we want to get rid of them in the long run - those drivers that have a errno input (e.g. networking) usually get errnos that don't know about the special block layer overloads, and similarly returning them to userspace will usually return somethings that strictly speaking isn't correct for file system operations, but that's left as an exercise for later. For now the set of errors is a very limited set that closely corresponds to the previous overloaded errno values, but there is some low hanging fruite to improve it. blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse typechecking, so that we can easily catch places passing the wrong values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:04 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove obfuscating CODE2SIZE macro Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:10 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block: Use DIV_ROUND_UP The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-22 14:57:16 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: remove struct request buffer member This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 09:46:28 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-23 17:19:00 -08:00
Introduce rq_for_each_segment replacing rq_for_each_bio Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-25 12:35:59 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Introduce rq_for_each_segment replacing rq_for_each_bio Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-25 12:35:59 +02:00
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-23 17:19:00 -08:00
Introduce rq_for_each_segment replacing rq_for_each_bio Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-25 12:35:59 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-23 17:19:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-23 17:19:00 -08:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Introduce rq_for_each_segment replacing rq_for_each_bio Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-25 12:35:59 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: blk_rq_[cur_]_{sectors|bytes}() usage cleanup With the previous changes, the followings are now guaranteed for all requests in any valid state. * blk_rq_sectors() == blk_rq_bytes() >> 9 * blk_rq_cur_sectors() == blk_rq_cur_bytes() >> 9 Clean up accessor usages. Notable changes are * nbd,i2o_block: end_all used instead of explicit byte count * scsi_lib: unnecessary conditional on request type removed [ Impact: cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:45 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: blk_rq_[cur_]_{sectors|bytes}() usage cleanup With the previous changes, the followings are now guaranteed for all requests in any valid state. * blk_rq_sectors() == blk_rq_bytes() >> 9 * blk_rq_cur_sectors() == blk_rq_cur_bytes() >> 9 Clean up accessor usages. Notable changes are * nbd,i2o_block: end_all used instead of explicit byte count * scsi_lib: unnecessary conditional on request type removed [ Impact: cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:45 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Introduce rq_for_each_segment replacing rq_for_each_bio Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-25 12:35:59 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-23 17:19:00 -08:00
Introduce rq_for_each_segment replacing rq_for_each_bio Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-25 12:35:59 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-23 17:19:00 -08:00
Introduce rq_for_each_segment replacing rq_for_each_bio Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-25 12:35:59 +02:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Introduce rq_for_each_segment replacing rq_for_each_bio Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-25 12:35:59 +02:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Introduce rq_for_each_segment replacing rq_for_each_bio Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-25 12:35:59 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Introduce rq_for_each_segment replacing rq_for_each_bio Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-25 12:35:59 +02:00
drivers/block/floppy.c: remove #define FLOPPY_SANITY_CHECK The code could not be compiled without the #define, so just remove it and the #ifdef/#endif lines. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:04 -08:00
Introduce rq_for_each_segment replacing rq_for_each_bio Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-09-25 12:35:59 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use warning macros Convert assertions to use WARN(). There are several error checks in the code for things that should never happen. Convert them to standard warnings so kerneloops.org will see them. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove duplicated flag FD_RAW_NEED_DISK Fix coccinelle warning (without behavior change): drivers/block/floppy.c:2518:32-48: duplicated argument to & or | Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-28 19:45:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use __func__ where appropriate Add and use __func__ to is_alive. Use __func__ in some DPRINTs. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:06 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: support arbitrary first-sector numbers The current floppy_struct allows floppies to number sectors starting from 0 or 1. This patch allows arbitrary first-sector numbers - for example, 0xC1 for Amstrad CPC disks. This extends the existing 1-bit field (FD_ZEROBASED, bit 2 of stretch) to 8 bits (FD_SECTMASK, bits 2 to 9). Currently 0x00 denotes a first sector number of 1, and 0x01 denotes a first sector number of 0. We extend this by interpreting FD_SECTMASK as the first sector number with the LSB flipped. Signed-off-by: Keith Wansbrough <keith@lochan.org> Cc: Alain Knaff <alain@linux.lu> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-22 14:57:17 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove obfuscating CODE2SIZE macro Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:10 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: support arbitrary first-sector numbers The current floppy_struct allows floppies to number sectors starting from 0 or 1. This patch allows arbitrary first-sector numbers - for example, 0xC1 for Amstrad CPC disks. This extends the existing 1-bit field (FD_ZEROBASED, bit 2 of stretch) to 8 bits (FD_SECTMASK, bits 2 to 9). Currently 0x00 denotes a first sector number of 1, and 0x01 denotes a first sector number of 0. We extend this by interpreting FD_SECTMASK as the first sector number with the LSB flipped. Signed-off-by: Keith Wansbrough <keith@lochan.org> Cc: Alain Knaff <alain@linux.lu> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-22 14:57:17 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: remove struct request buffer member This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 09:46:28 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
block: remove struct request buffer member This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 09:46:28 -06:00
drivers/block/floppy.c: remove unnecessary braces Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: remove struct request buffer member This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 09:46:28 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: remove struct request buffer member This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 09:46:28 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: remove struct request buffer member This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 09:46:28 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use __func__ where appropriate Add and use __func__ to is_alive. Use __func__ in some DPRINTs. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:06 -08:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: comment neatening and remove naked ; Spacing, column alignment and a for loop with a naked semicolon converted to an assign and while Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: comment neatening and remove naked ; Spacing, column alignment and a for loop with a naked semicolon converted to an assign and while Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: remove struct request buffer member This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 09:46:28 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: remove struct request buffer member This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 09:46:28 -06:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: remove struct request buffer member This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 09:46:28 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: blk_rq_[cur_]_{sectors|bytes}() usage cleanup With the previous changes, the followings are now guaranteed for all requests in any valid state. * blk_rq_sectors() == blk_rq_bytes() >> 9 * blk_rq_cur_sectors() == blk_rq_cur_bytes() >> 9 Clean up accessor usages. Notable changes are * nbd,i2o_block: end_all used instead of explicit byte count * scsi_lib: unnecessary conditional on request type removed [ Impact: cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:45 +09:00
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 22:24:39 +09:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: switch to one queue per drive instead of sharing a queue Pretty straight forward conversion. Note that we do round-robin between the drives that have available requests, before we simply used the drive that the IO scheduler told us to. Since the IO scheduler doesn't care about multiple devices per queue, the resulting sort would not have made sense. Fixed by Vivek to get rid of a double lock problem in set_next_request() Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
2010-09-22 09:32:36 +02:00
floppy: switch from req->errors to req->error_count Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 16:03:12 +02:00
floppy: switch to one queue per drive instead of sharing a queue Pretty straight forward conversion. Note that we do round-robin between the drives that have available requests, before we simply used the drive that the IO scheduler told us to. Since the IO scheduler doesn't care about multiple devices per queue, the resulting sort would not have made sense. Fixed by Vivek to get rid of a double lock problem in set_next_request() Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
2010-09-22 09:32:36 +02:00
floppy: switch from req->errors to req->error_count Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 16:03:12 +02:00
floppy: switch to one queue per drive instead of sharing a queue Pretty straight forward conversion. Note that we do round-robin between the drives that have available requests, before we simply used the drive that the IO scheduler told us to. Since the IO scheduler doesn't care about multiple devices per queue, the resulting sort would not have made sense. Fixed by Vivek to get rid of a double lock problem in set_next_request() Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
2010-09-22 09:32:36 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: unclutter redo_fd_request logic Change for(;;) with continue; to label: goto label Reduces indentation and adds a bit of clarity. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
floppy: switch to one queue per drive instead of sharing a queue Pretty straight forward conversion. Note that we do round-robin between the drives that have available requests, before we simply used the drive that the IO scheduler told us to. Since the IO scheduler doesn't care about multiple devices per queue, the resulting sort would not have made sense. Fixed by Vivek to get rid of a double lock problem in set_next_request() Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
2010-09-22 09:32:36 +02:00
drivers/block/floppy.c: unclutter redo_fd_request logic Change for(;;) with continue; to label: goto label Reduces indentation and adds a bit of clarity. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: unclutter redo_fd_request logic Change for(;;) with continue; to label: goto label Reduces indentation and adds a bit of clarity. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
drivers/block/floppy.c: remove unnecessary argument from [__]reschedule_timeout Prior to patch "drivers/block/floppy.c: Use pr_<level>" only reschedule_timeout(,"request done"...) printed a numeric value after a reschedule_timeout event message. Restore that behavior and remove the now unnecessary argument. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: unclutter redo_fd_request logic Change for(;;) with continue; to label: goto label Reduces indentation and adds a bit of clarity. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: unclutter redo_fd_request logic Change for(;;) with continue; to label: goto label Reduces indentation and adds a bit of clarity. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
floppy: switch from req->errors to req->error_count Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 16:03:12 +02:00
drivers/block/floppy.c: unclutter redo_fd_request logic Change for(;;) with continue; to label: goto label Reduces indentation and adds a bit of clarity. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: unclutter redo_fd_request logic Change for(;;) with continue; to label: goto label Reduces indentation and adds a bit of clarity. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
drivers/block/floppy.c: add __func__ to debugt Make debugt messages a little neater. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:09 -08:00
drivers/block/floppy.c: unclutter redo_fd_request logic Change for(;;) with continue; to label: goto label Reduces indentation and adds a bit of clarity. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: make controller const The struct cont_t is just a set of virtual function pointers. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-20 20:09:00 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use warning macros Convert assertions to use WARN(). There are several error checks in the code for things that should never happen. Convert them to standard warnings so kerneloops.org will see them. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use warning macros Convert assertions to use WARN(). There are several error checks in the code for things that should never happen. Convert them to standard warnings so kerneloops.org will see them. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
block: fold cmd_type into the REQ_OP_ space Instead of keeping two levels of indirection for requests types, fold it all into the operations. The little caveat here is that previously cmd_type only applied to struct request, while the request and bio op fields were set to plain REQ_OP_READ/WRITE even for passthrough operations. Instead this patch adds new REQ_OP_* for SCSI passthrough and driver private requests, althought it has to add two for each so that we can communicate the data in/out nature of the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 16:57:31 +01:00
block: make rq->cmd_flags be 64-bit We have officially run out of flags in a 32-bit space. Extend it to 64-bit even on 32-bit archs. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-05-23 12:25:08 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use warning macros Convert assertions to use WARN(). There are several error checks in the code for things that should never happen. Convert them to standard warnings so kerneloops.org will see them. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use __func__ where appropriate Add and use __func__ to is_alive. Use __func__ in some DPRINTs. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:06 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use __func__ where appropriate Add and use __func__ to is_alive. Use __func__ in some DPRINTs. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:06 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: make controller const The struct cont_t is just a set of virtual function pointers. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-20 20:09:00 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: add debug_dcl(...) macro Converted #ifdef DCL_DEBUG if (test) DPRINTK(...); #endif to debug_dcl(test, ...); Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:54 -08:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
drivers/block/floppy.c: remove macros CALL, WAIT and IWAIT Obfuscating macros with embedded returns are not nice Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:57 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: make controller const The struct cont_t is just a set of virtual function pointers. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-20 20:09:00 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove macros CALL, WAIT and IWAIT Obfuscating macros with embedded returns are not nice Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:57 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove unnecessary inlines These routines are all big enough that is better to let the compiler decide to inline or not. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block/floppy: Convert callback to pass timer_list In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to passing in the timer pointer explicitly. Calculate the drive from the offset of the timer in the timer list. Cc: Jiri Kosina <jikos@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Geliang Tang <geliangtang@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-04 17:49:29 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: make controller const The struct cont_t is just a set of virtual function pointers. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-20 20:09:00 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove unnecessary inlines These routines are all big enough that is better to let the compiler decide to inline or not. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: don't write kernel-only members to FDRAWCMD ioctl output Do not leak kernel-only floppy_raw_cmd structure members to userspace. This includes the linked-list pointer and the pointer to the allocated DMA space. Signed-off-by: Matthew Daley <mattd@bugfuzz.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-28 19:05:21 +12:00
drivers/block/floppy.c: remove [_]COPYIN [_]COPYOUT and ECALL macros Remove these obfuscating macros with hidden returns Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:56 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: comment neatening and remove naked ; Spacing, column alignment and a for loop with a naked semicolon converted to an assign and while Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
drivers/block/floppy.c: remove most uses of CALL and ECALL macros Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
drivers/block/floppy.c: comment neatening and remove naked ; Spacing, column alignment and a for loop with a naked semicolon converted to an assign and while Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert raw_cmd_copyin from while(1) to label: goto Reduces indent. Makes a bit more readable and intelligible. Return value now at bottom of function. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:08 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove unnecessary inlines These routines are all big enough that is better to let the compiler decide to inline or not. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert raw_cmd_copyin from while(1) to label: goto Reduces indent. Makes a bit more readable and intelligible. Return value now at bottom of function. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:08 -08:00
floppy: replace wrong kmalloc(GFP_USER) with GFP_KERNEL The raw_cmd_copyin() function does a kmalloc() with GFP_USER, although the allocated structure is obviously not mapped to userspace, just copied from/to. In this case GFP_KERNEL is more appropriate, so let's use it, although in the current implementation this does not manifest as any error. Reported-by: Matthew Wilcox <mawilcox@linuxonhyperv.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-04 11:19:31 +01:00
drivers/block/floppy.c: convert raw_cmd_copyin from while(1) to label: goto Reduces indent. Makes a bit more readable and intelligible. Return value now at bottom of function. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:08 -08:00
floppy: ignore kernel-only members in FDRAWCMD ioctl input Always clear out these floppy_raw_cmd struct members after copying the entire structure from userspace so that the in-kernel version is always valid and never left in an interdeterminate state. Signed-off-by: Matthew Daley <mattd@bugfuzz.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-28 19:05:20 +12:00
drivers/block/floppy.c: convert raw_cmd_copyin from while(1) to label: goto Reduces indent. Makes a bit more readable and intelligible. Return value now at bottom of function. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:08 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert raw_cmd_copyin from while(1) to label: goto Reduces indent. Makes a bit more readable and intelligible. Return value now at bottom of function. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:08 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert raw_cmd_copyin from while(1) to label: goto Reduces indent. Makes a bit more readable and intelligible. Return value now at bottom of function. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:08 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert raw_cmd_copyin from while(1) to label: goto Reduces indent. Makes a bit more readable and intelligible. Return value now at bottom of function. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:08 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert raw_cmd_copyin from while(1) to label: goto Reduces indent. Makes a bit more readable and intelligible. Return value now at bottom of function. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:08 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert raw_cmd_copyin from while(1) to label: goto Reduces indent. Makes a bit more readable and intelligible. Return value now at bottom of function. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:08 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
drivers/block/floppy.c: add debug_dcl(...) macro Converted #ifdef DCL_DEBUG if (test) DPRINTK(...); #endif to debug_dcl(test, ...); Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove unnecessary inlines These routines are all big enough that is better to let the compiler decide to inline or not. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: support arbitrary first-sector numbers The current floppy_struct allows floppies to number sectors starting from 0 or 1. This patch allows arbitrary first-sector numbers - for example, 0xC1 for Amstrad CPC disks. This extends the existing 1-bit field (FD_ZEROBASED, bit 2 of stretch) to 8 bits (FD_SECTMASK, bits 2 to 9). Currently 0x00 denotes a first sector number of 1, and 0x01 denotes a first sector number of 0. We extend this by interpreting FD_SECTMASK as the first sector number with the LSB flipped. Signed-off-by: Keith Wansbrough <keith@lochan.org> Cc: Alain Knaff <alain@linux.lu> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-22 14:57:17 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] sem2mutex: drivers/block/floppy.c Convert from semaphore to mutex. Untested as I have no access to a floppy drive at the moment. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 03:00:26 -08:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
floppy: fix lock imbalance A crappy macro prevents us unlocking on a fail path. Expand the macro and unlock appropriatelly. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 11:41:44 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Fix over-zealous flush_disk when changing device size. There are two cases when we call flush_disk. In one, the device has disappeared (check_disk_change) so any data will hold becomes irrelevant. In the oter, the device has changed size (check_disk_size_change) so data we hold may be irrelevant. In both cases it makes sense to discard any 'clean' buffers, so they will be read back from the device if needed. In the former case it makes sense to discard 'dirty' buffers as there will never be anywhere safe to write the data. In the second case it *does*not* make sense to discard dirty buffers as that will lead to file system corruption when you simply enlarge the containing devices. flush_disk calls __invalidate_devices. __invalidate_device calls both invalidate_inodes and invalidate_bdev. invalidate_inodes *does* discard I_DIRTY inodes and this does lead to fs corruption. invalidate_bev *does*not* discard dirty pages, but I don't really care about that at present. So this patch adds a flag to __invalidate_device (calling it __invalidate_device2) to indicate whether dirty buffers should be killed, and this is passed to invalidate_inodes which can choose to skip dirty inodes. flusk_disk then passes true from check_disk_change and false from check_disk_size_change. dm avoids tripping over this problem by calling i_size_write directly rathher than using check_disk_size_change. md does use check_disk_size_change and so is affected. This regression was introduced by commit 608aeef17a which causes check_disk_size_change to call flush_disk, so it is suitable for any kernel since 2.6.27. Cc: stable@kernel.org Acked-by: Jeff Moyer <jmoyer@redhat.com> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-24 17:25:47 +11:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] sem2mutex: drivers/block/floppy.c Convert from semaphore to mutex. Untested as I have no access to a floppy drive at the moment. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 03:00:26 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
drivers/block/floppy.c: remove most uses of CALL and ECALL macros Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
drivers/block/floppy.c: remove most uses of CALL and ECALL macros Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: support arbitrary first-sector numbers The current floppy_struct allows floppies to number sectors starting from 0 or 1. This patch allows arbitrary first-sector numbers - for example, 0xC1 for Amstrad CPC disks. This extends the existing 1-bit field (FD_ZEROBASED, bit 2 of stretch) to 8 bits (FD_SECTMASK, bits 2 to 9). Currently 0x00 denotes a first sector number of 1, and 0x01 denotes a first sector number of 0. We extend this by interpreting FD_SECTMASK as the first sector number with the LSB flipped. Signed-off-by: Keith Wansbrough <keith@lochan.org> Cc: Alain Knaff <alain@linux.lu> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-22 14:57:17 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: fix signed/unsigned warnings Ioctl cmd value is unsigned, so change normalize_ioctl Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: fix signed/unsigned warnings Ioctl cmd value is unsigned, so change normalize_ioctl Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
drivers/block/floppy.c: remove most uses of CALL and ECALL macros Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] Add block_device_operations.getgeo block device method HDIO_GETGEO is implemented in most block drivers, and all of them have to duplicate the code to copy the structure to userspace, as well as getting the start sector. This patch moves that to common code [1] and adds a ->getgeo method to fill out the raw kernel hd_geometry structure. For many drivers this means ->ioctl can go away now. [1] the s390 block drivers are odd in this respect. xpram sets ->start to 4 always which seems more than odd, and the dasd driver shifts the start offset around, probably because of it's non-standard sector size. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@suse.de> Cc: <mike.miller@hp.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 01:02:50 -08:00
block: push down BKL into .locked_ioctl As a preparation for the removal of the big kernel lock in the block layer, this removes the BKL from the common ioctl handling code, moving it into every single driver still using it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-08 10:18:46 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] switch floppy Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 09:27:55 -05:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary casting in fd_ioctl Convert outparam to const void *. Cast outparam to const char * for strlen(). Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:11 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary braces Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary braces Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary braces Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
drivers/block/floppy.c: remove most uses of CALL and ECALL macros Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
drivers/block/floppy.c: remove unnecessary braces Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove misleading, used once FD_IOCTL_ALLOWED macro Just code the test directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:10 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: Add an extra bound check on ioctl arguments gcc is not convinced that the floppy.c ioctl has sufficient bound checks: In function `copy_from_user', inlined from `fd_copyin' at drivers/block/floppy.c:3080, inlined from `fd_ioctl' at drivers/block/floppy.c:3503: arch/x86/include/asm/uaccess_32.h:211: warning: call to `copy_from_user_overflow' declared with attribute warning: copy_from_user buffer size is not provably correct And frankly, as a human I have a hard time proving the same more or less (the size comes from the ioctl argument. humpf. maybe. the code isn't very nice) This patch adds an explicit check to make 100% sure it's safe, better than finding out later that there indeed was a gap. [akpm@linux-foundation.org: add WARN_ON()] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14 18:00:11 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove CLEARSTRUCT macro, use memset Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
drivers/block/floppy.c: remove most uses of CALL and ECALL macros Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
drivers/block/floppy.c: remove most uses of CALL and ECALL macros Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
drivers/block/floppy.c: remove unnecessary casting in fd_ioctl Convert outparam to const void *. Cast outparam to const char * for strlen(). Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:11 -08:00
drivers/block/floppy.c: remove most uses of CALL and ECALL macros Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
drivers/block/floppy.c: remove most uses of CALL and ECALL macros Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
drivers/block/floppy.c: remove unnecessary casting in fd_ioctl Convert outparam to const void *. Cast outparam to const char * for strlen(). Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:11 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
drivers/block/floppy.c: remove unnecessary casting in fd_ioctl Convert outparam to const void *. Cast outparam to const char * for strlen(). Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:11 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
drivers/block/floppy.c: remove unnecessary casting in fd_ioctl Convert outparam to const void *. Cast outparam to const char * for strlen(). Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:11 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
drivers/block/floppy.c: remove most uses of CALL and ECALL macros Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
drivers/block/floppy.c: remove unnecessary casting in fd_ioctl Convert outparam to const void *. Cast outparam to const char * for strlen(). Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:11 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
drivers/block/floppy.c: remove unnecessary casting in fd_ioctl Convert outparam to const void *. Cast outparam to const char * for strlen(). Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:11 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
drivers/block/floppy.c: remove unnecessary casting in fd_ioctl Convert outparam to const void *. Cast outparam to const char * for strlen(). Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:11 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
drivers/block/floppy.c: remove most uses of CALL and ECALL macros Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: remove macro LOCK_FDC Macros with hidden returns aren't nice. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:53 -08:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove IN/OUT macros, indent switch/case Remove ugly IN/OUT macros, use direct case and code Add missing semicolon after ECALL Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:52 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: push down BKL into .locked_ioctl As a preparation for the removal of the big kernel lock in the block layer, this removes the BKL from the common ioctl handling code, moving it into every single driver still using it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-08 10:18:46 +02:00
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 14:28:52 +02:00
block: push down BKL into .locked_ioctl As a preparation for the removal of the big kernel lock in the block layer, this removes the BKL from the common ioctl handling code, moving it into every single driver still using it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-08 10:18:46 +02:00
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 14:28:52 +02:00
block: push down BKL into .locked_ioctl As a preparation for the removal of the big kernel lock in the block layer, this removes the BKL from the common ioctl handling code, moving it into every single driver still using it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-08 10:18:46 +02:00
take floppy compat ioctls to sodding floppy.c all other drivers recognizing those ioctls are very much *not* biarch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-27 15:47:56 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: make local variable non-static There's no reason for temparea to be static, since it's only used for temporary sprintf output. It's not immediately obvious that the output will always fit (in the worst case, the output including '\0' is exactly 32 bytes), so save a future reader from worrying about that. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-01 15:54:01 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] drivers/block: Use ARRAY_SIZE macro Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove a duplicate of ARRAY_SIZE. Some trailing whitespaces are also removed. drivers/block/acsi* has been left out as it's marked BROKEN. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 01:05:11 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: make local variable non-static There's no reason for temparea to be static, since it's only used for temporary sprintf output. It's not immediately obvious that the output will always fit (in the worst case, the output including '\0' is exactly 32 bytes), so save a future reader from worrying about that. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-01 15:54:01 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block_device_operations->release() should return void The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-05 21:52:57 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] switch floppy Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 09:27:55 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 14:28:52 +02:00
[PATCH] sem2mutex: drivers/block/floppy.c Convert from semaphore to mutex. Untested as I have no access to a floppy drive at the moment. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 03:00:26 -08:00
floppy: remove floppy-specific O_EXCL handling Block layer now handles O_EXCL in a generic way for block devices. The semantics is however different for floppy and all other block devices, as floppy driver contains its own O_EXCL handling. The semantics for all-but-floppy bdevs is "there can be at most one O_EXCL open of this file", while for floppy bdev the semantics is "if someone has the bdev open with O_EXCL, noone else can open it". There is actual userspace-observable change in behavior because of this since commit e525fd89d380c ("block: make blkdev_get/put() handle exclusive access") -- on kernels containing this commit, mount of /dev/fd0 causes the fd0 block device be claimed with _EXCL, preventing subsequent open(/dev/fd0). Bring things back into shape, i.e. make it possible, analogically to other block devices, to mount the floppy and open() it afterwards -- remove the floppy-specific handling and let the generic bdev code O_EXCL handling take over. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:28 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] sem2mutex: drivers/block/floppy.c Convert from semaphore to mutex. Untested as I have no access to a floppy drive at the moment. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 03:00:26 -08:00
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 14:28:52 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] switch floppy Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 09:27:55 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] switch floppy Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 09:27:55 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 14:28:52 +02:00
[PATCH] sem2mutex: drivers/block/floppy.c Convert from semaphore to mutex. Untested as I have no access to a floppy drive at the moment. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 03:00:26 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] switch floppy Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 09:27:55 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove floppy-specific O_EXCL handling Block layer now handles O_EXCL in a generic way for block devices. The semantics is however different for floppy and all other block devices, as floppy driver contains its own O_EXCL handling. The semantics for all-but-floppy bdevs is "there can be at most one O_EXCL open of this file", while for floppy bdev the semantics is "if someone has the bdev open with O_EXCL, noone else can open it". There is actual userspace-observable change in behavior because of this since commit e525fd89d380c ("block: make blkdev_get/put() handle exclusive access") -- on kernels containing this commit, mount of /dev/fd0 causes the fd0 block device be claimed with _EXCL, preventing subsequent open(/dev/fd0). Bring things back into shape, i.e. make it possible, analogically to other block devices, to mount the floppy and open() it afterwards -- remove the floppy-specific handling and let the generic bdev code O_EXCL handling take over. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:28 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] switch floppy Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 09:27:55 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary braces Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] switch floppy Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 09:27:55 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Revert "floppy: refactor open() flags handling" This reverts commit 09954bad448791ef01202351d437abdd9497a804.
2016-08-25 08:56:51 -06:00
[PATCH] sem2mutex: drivers/block/floppy.c Convert from semaphore to mutex. Untested as I have no access to a floppy drive at the moment. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 03:00:26 -08:00
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 14:28:52 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove floppy-specific O_EXCL handling Block layer now handles O_EXCL in a generic way for block devices. The semantics is however different for floppy and all other block devices, as floppy driver contains its own O_EXCL handling. The semantics for all-but-floppy bdevs is "there can be at most one O_EXCL open of this file", while for floppy bdev the semantics is "if someone has the bdev open with O_EXCL, noone else can open it". There is actual userspace-observable change in behavior because of this since commit e525fd89d380c ("block: make blkdev_get/put() handle exclusive access") -- on kernels containing this commit, mount of /dev/fd0 causes the fd0 block device be claimed with _EXCL, preventing subsequent open(/dev/fd0). Bring things back into shape, i.e. make it possible, analogically to other block devices, to mount the floppy and open() it afterwards -- remove the floppy-specific handling and let the generic bdev code O_EXCL handling take over. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:28 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] sem2mutex: drivers/block/floppy.c Convert from semaphore to mutex. Untested as I have no access to a floppy drive at the moment. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 03:00:26 -08:00
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 14:28:52 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy,{ami|ata}flop: Convert to bdops->check_events() Convert the floppy drivers from ->media_changed() to ->check_events(). Both floppy and ataflop buffer media changed state bit and clear them on revalidation and will behave correctly with kernel event polling. I can't tell how amiflop clears its event and it's possible that it may generate spurious events when polled. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
floppy,{ami|ata}flop: Convert to bdops->check_events() Convert the floppy drivers from ->media_changed() to ->check_events(). Both floppy and ataflop buffer media changed state bit and clear them on revalidation and will behave correctly with kernel event polling. I can't tell how amiflop clears its event and it's possible that it may generate spurious events when polled. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] drivers/block/*: use time_after() and friends They deal with wrapping correctly and are nicer to read. Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 01:56:44 -08:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: replace NO_GEOM macro with a function This patch replaces the NO_GEOM macro with a proper static inline function and converts an open-coded caller in check_floppy_change() to use it. Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-08 14:44:34 +01:00
floppy,{ami|ata}flop: Convert to bdops->check_events() Convert the floppy drivers from ->media_changed() to ->check_events(). Both floppy and ataflop buffer media changed state bit and clear them on revalidation and will behave correctly with kernel event polling. I can't tell how amiflop clears its event and it's possible that it may generate spurious events when polled. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:27 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: bail out in open() if drive is not responding to block0 read In case reading of block 0 during open() fails, it is not the right thing to let open() succeed. Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in case the bio callback encounters an error while trying to read block 0. As a bonus, this works around certain broken userspace (blkid), which is not able to properly handle read()s returning IO errors. Hence be nice to those, and bail out during open() already; if block 0 is not readable, read()s are not going to provide any meaningful data anyway. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-10 02:08:13 +01:00
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-20 15:29:37 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: bail out in open() if drive is not responding to block0 read In case reading of block 0 during open() fails, it is not the right thing to let open() succeed. Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in case the bio callback encounters an error while trying to read block 0. As a bonus, this works around certain broken userspace (blkid), which is not able to properly handle read()s returning IO errors. Hence be nice to those, and bail out during open() already; if block 0 is not readable, read()s are not going to provide any meaningful data anyway. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-10 02:08:13 +01:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-20 15:29:37 +02:00
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-03 09:38:06 +02:00
floppy: bail out in open() if drive is not responding to block0 read In case reading of block 0 during open() fails, it is not the right thing to let open() succeed. Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in case the bio callback encounters an error while trying to read block 0. As a bonus, this works around certain broken userspace (blkid), which is not able to properly handle read()s returning IO errors. Hence be nice to those, and bail out during open() already; if block 0 is not readable, read()s are not going to provide any meaningful data anyway. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-10 02:08:13 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: bail out in open() if drive is not responding to block0 read In case reading of block 0 during open() fails, it is not the right thing to let open() succeed. Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in case the bio callback encounters an error while trying to read block 0. As a bonus, this works around certain broken userspace (blkid), which is not able to properly handle read()s returning IO errors. Hence be nice to those, and bail out during open() already; if block 0 is not readable, read()s are not going to provide any meaningful data anyway. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-10 02:08:13 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: bail out in open() if drive is not responding to block0 read In case reading of block 0 during open() fails, it is not the right thing to let open() succeed. Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in case the bio callback encounters an error while trying to read block 0. As a bonus, this works around certain broken userspace (blkid), which is not able to properly handle read()s returning IO errors. Hence be nice to those, and bail out during open() already; if block 0 is not readable, read()s are not going to provide any meaningful data anyway. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-10 02:08:13 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: bail out in open() if drive is not responding to block0 read In case reading of block 0 during open() fails, it is not the right thing to let open() succeed. Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in case the bio callback encounters an error while trying to read block 0. As a bonus, this works around certain broken userspace (blkid), which is not able to properly handle read()s returning IO errors. Hence be nice to those, and bail out during open() already; if block 0 is not readable, read()s are not going to provide any meaningful data anyway. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-10 02:08:13 +01:00
block: bio: pass bvec table to bio_init() Some drivers often use external bvec table, so introduce this helper for this case. It is always safe to access the bio->bi_io_vec in this way for this case. After converting to this usage, it will becomes a bit easier to evaluate the remaining direct access to bio->bi_io_vec, so it can help to prepare for the following multipage bvec support. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Fixed up the new O_DIRECT cases. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-22 08:57:21 -07:00
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 19:10:32 +02:00
block: floppy: use bio_add_page() Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-11 20:05:31 +08:00
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 15:44:27 -07:00
floppy: do not corrupt bio.bi_flags when reading block 0 Commit 41a55b4de39 ("floppy: silence warning during disk test") caused bio.bi_flags being overwritten, and its initialization to BIO_UPTODATE in bio_init() to be lost. This was unnoticed until 7b7b68bba5 ("floppy: bail out in open() if drive is not responding to block0 read"), because the error value wasn't checked for in the bio completion callback. Now we are actually looking at the error, and the loss of BIO_UPTODATE causes EIO to be wrongly passed to the callback, which confuses the FD_OPEN_SHOULD_FAIL_BIT logic. Fix this by not destroying previous value of bi_flags when setting BIO_QUIET. Cc: Stephen Hemminger <shemminger@vyatta.com> Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-28 11:55:23 +02:00
floppy: bail out in open() if drive is not responding to block0 read In case reading of block 0 during open() fails, it is not the right thing to let open() succeed. Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in case the bio callback encounters an error while trying to read block 0. As a bonus, this works around certain broken userspace (blkid), which is not able to properly handle read()s returning IO errors. Hence be nice to those, and bail out during open() already; if block 0 is not readable, read()s are not going to provide any meaningful data anyway. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-10 02:08:13 +01:00
block, fs, mm, drivers: use bio set/get op accessors This patch converts the simple bi_rw use cases in the block, drivers, mm and fs code to set/get the bio operation using bio_set_op_attrs/bio_op These should be simple one or two liner cases, so I just did them in one patch. The next patches handle the more complicated cases in a module per patch. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:31:48 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block/fs/drivers: remove rw argument from submit_bio This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-05 14:31:41 -05:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: bail out in open() if drive is not responding to block0 read In case reading of block 0 during open() fails, it is not the right thing to let open() succeed. Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in case the bio callback encounters an error while trying to read block 0. As a bonus, this works around certain broken userspace (blkid), which is not able to properly handle read()s returning IO errors. Hence be nice to those, and bail out during open() already; if block 0 is not readable, read()s are not going to provide any meaningful data anyway. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-10 02:08:13 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
floppy: replace NO_GEOM macro with a function This patch replaces the NO_GEOM macro with a proper static inline function and converts an open-coded caller in check_floppy_change() to use it. Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-08 14:44:34 +01:00
floppy: use warning macros Convert assertions to use WARN(). There are several error checks in the code for things that should never happen. Convert them to standard warnings so kerneloops.org will see them. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use warning macros Convert assertions to use WARN(). There are several error checks in the code for things that should never happen. Convert them to standard warnings so kerneloops.org will see them. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
floppy: fix lock_fdc() signal handling floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-01 11:19:17 +01:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
floppy: replace NO_GEOM macro with a function This patch replaces the NO_GEOM macro with a proper static inline function and converts an open-coded caller in check_floppy_change() to use it. Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-08 14:44:34 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: replace NO_GEOM macro with a function This patch replaces the NO_GEOM macro with a proper static inline function and converts an open-coded caller in check_floppy_change() to use it. Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-08 14:44:34 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: bail out in open() if drive is not responding to block0 read In case reading of block 0 during open() fails, it is not the right thing to let open() succeed. Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in case the bio callback encounters an error while trying to read block 0. As a bonus, this works around certain broken userspace (blkid), which is not able to properly handle read()s returning IO errors. Hence be nice to those, and bail out during open() already; if block 0 is not readable, read()s are not going to provide any meaningful data anyway. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-10 02:08:13 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
const: make block_device_operations const Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21 17:01:13 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
[PATCH] switch floppy Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 09:27:55 -05:00
block: push down BKL into .locked_ioctl As a preparation for the removal of the big kernel lock in the block layer, this removes the BKL from the common ioctl handling code, moving it into every single driver still using it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-08 10:18:46 +02:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
floppy,{ami|ata}flop: Convert to bdops->check_events() Convert the floppy drivers from ->media_changed() to ->check_events(). Both floppy and ataflop buffer media changed state bit and clear them on revalidation and will behave correctly with kernel event polling. I can't tell how amiflop clears its event and it's possible that it may generate spurious events when polled. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:27 +01:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
take floppy compat ioctls to sodding floppy.c all other drivers recognizing those ioctls are very much *not* biarch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-27 15:47:56 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
drivers/block/floppy.c: hoist assigns from if()s, neatening Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:48 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: comment neatening and remove naked ; Spacing, column alignment and a for loop with a naked semicolon converted to an assign and while Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
Create/use more directory structure in the Documentation/ tree. Create Documentation/blockdev/ sub-directory and populate it. Populate the Documentation/serial/ sub-directory. Move MSI-HOWTO.txt to Documentation/PCI/. Move ioctl-number.txt to Documentation/ioctl/. Update all relevant 00-INDEX files. Update all relevant Kconfig files and source files. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2008-11-13 21:33:24 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] Floppy: add cmos attribute to floppy driver tidy Fiddle with coding style a bit. Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-27 17:37:34 -07:00
[PATCH] Floppy: Add cmos attribute to floppy driver Currently only a device 'fdX' shows up in sysfs; the other possible device for this drive (like fd0h1440 etc) must be guessed from there. This patch corrects the floppy driver to create a platform device for each floppy found; each platform device also has an attribute 'cmos' which represents the cmos type for this drive. From this attribute the other possible device types can be computed. From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-15 10:09:25 +02:00
platform: make better use of to_platform_{device,driver}() macros This helps the code look more consistent and cleaner. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-31 22:47:44 +08:00
[PATCH] Floppy: add cmos attribute to floppy driver tidy Fiddle with coding style a bit. Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-27 17:37:34 -07:00
[PATCH] Floppy: Add cmos attribute to floppy driver Currently only a device 'fdX' shows up in sysfs; the other possible device for this drive (like fd0h1440 etc) must be guessed from there. This patch corrects the floppy driver to create a platform device for each floppy found; each platform device also has an attribute 'cmos' which represents the cmos type for this drive. From this attribute the other possible device types can be computed. From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-15 10:09:25 +02:00
[PATCH] Floppy: add cmos attribute to floppy driver tidy Fiddle with coding style a bit. Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-27 17:37:34 -07:00
[PATCH] Floppy: Add cmos attribute to floppy driver Currently only a device 'fdX' shows up in sysfs; the other possible device for this drive (like fd0h1440 etc) must be guessed from there. This patch corrects the floppy driver to create a platform device for each floppy found; each platform device also has an attribute 'cmos' which represents the cmos type for this drive. From this attribute the other possible device types can be computed. From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-15 10:09:25 +02:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
floppy: cmos attribute should be static As reported by sparse, cmos attribute is local. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
[PATCH] Floppy: Add cmos attribute to floppy driver Currently only a device 'fdX' shows up in sysfs; the other possible device for this drive (like fd0h1440 etc) must be guessed from there. This patch corrects the floppy driver to create a platform device for each floppy found; each platform device also has an attribute 'cmos' which represents the cmos type for this drive. From this attribute the other possible device types can be computed. From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-15 10:09:25 +02:00
floppy: Avoid manual call of device_create_file() Use the static attribute groups assigned to the device instead of calling device_create_file() after the device registration. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-02 17:08:45 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: Switch driver to dev_pm_ops Gets rid of the following warning: Platform driver 'floppy' needs updating - please use dev_pm_ops [rjw: Fixed up the definition of floppy_pm_ops.] Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-07-25 22:24:54 +02:00
floppy: fix hibernation Based on Ingo Molnar's patch from 2006, this makes the floppy work after resume from hibernation, at least on my machine. This fix resets the floppy controller on resume. It was experimentally determined to bring the controller back to life - we don't really know why it works. floppy_init() does the same thing at boot/modprobe time. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-10 12:57:09 -07:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
floppy: fix hibernation Based on Ingo Molnar's patch from 2006, this makes the floppy work after resume from hibernation, at least on my machine. This fix resets the floppy controller on resume. It was experimentally determined to bring the controller back to life - we don't really know why it works. floppy_init() does the same thing at boot/modprobe time. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-10 12:57:09 -07:00
const: constify remaining dev_pm_ops Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14 18:00:08 -08:00
floppy: fix hibernation Based on Ingo Molnar's patch from 2006, this makes the floppy work after resume from hibernation, at least on my machine. This fix resets the floppy controller on resume. It was experimentally determined to bring the controller back to life - we don't really know why it works. floppy_init() does the same thing at boot/modprobe time. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-10 12:57:09 -07:00
floppy: Switch driver to dev_pm_ops Gets rid of the following warning: Platform driver 'floppy' needs updating - please use dev_pm_ops [rjw: Fixed up the definition of floppy_pm_ops.] Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-07-25 22:24:54 +02:00
floppy: fix hibernation Based on Ingo Molnar's patch from 2006, this makes the floppy work after resume from hibernation, at least on my machine. This fix resets the floppy controller on resume. It was experimentally determined to bring the controller back to life - we don't really know why it works. floppy_init() does the same thing at boot/modprobe time. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-10 12:57:09 -07:00
drivers/block/floppy.c: comment neatening and remove naked ; Spacing, column alignment and a for loop with a naked semicolon converted to an assign and while Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
floppy: fix hibernation Based on Ingo Molnar's patch from 2006, this makes the floppy work after resume from hibernation, at least on my machine. This fix resets the floppy controller on resume. It was experimentally determined to bring the controller back to life - we don't really know why it works. floppy_init() does the same thing at boot/modprobe time. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-10 12:57:09 -07:00
[PATCH] Floppy: Add cmos attribute to floppy driver Currently only a device 'fdX' shows up in sysfs; the other possible device for this drive (like fd0h1440 etc) must be guessed from there. This patch corrects the floppy driver to create a platform device for each floppy found; each platform device also has an attribute 'cmos' which represents the cmos type for this drive. From this attribute the other possible device types can be computed. From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-15 10:09:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use common function to check if floppies can be registered The same checks to see if a drive can be or is registered are repeated through the code, factor out the checks in a common function and replace the repeated checks with it. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-27 20:56:55 -03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use common function to check if floppies can be registered The same checks to see if a drive can be or is registered are repeated through the code, factor out the checks in a common function and replace the repeated checks with it. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-27 20:56:55 -03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] drivers/block: Use ARRAY_SIZE macro Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove a duplicate of ARRAY_SIZE. Some trailing whitespaces are also removed. drivers/block/acsi* has been left out as it's marked BROKEN. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 01:05:11 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
genhd: Rename get_disk() to get_disk_and_module() Rename get_disk() to get_disk_and_module() to make sure what the function does. It's not a great name but at least it is now clear that put_disk() is not it's counterpart. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26 13:01:38 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: Run floppy initialization asynchronous floppy_init is quite slow, 3s on my test system to determine that there is no floppy. Run it asynchronous to the other init calls to improve boot time. [jkosina@suse.cz: fix modular build] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-02 17:27:04 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove dr, reuse drive on do_floppy_init This is a small cleanup, that also may turn error handling of unitialized disks more readable. We don't need a separate variable to track allocated disks, remove dr and reuse drive variable instead. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:36:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: initialize debug jiffies offset Set debug jiffies offset at initialization. Avoids wierd values showing up if debugging enabled. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
powerpc: convert CONFIG_PPC_MERGE to CONFIG_PPC for legacy io checks Now that arch/ppc is dead CONFIG_PPC_MERGE is always defined for all powerpc platforms and we want to get rid of CONFIG_PPC_MERGE use CONFIG_PPC instead. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-22 14:41:31 -07:00
[PATCH] exit early in floppy_init when no floppy exists modprobe -v floppy on a Apple G5 writes incorrect stuff to dmesg: Floppy drive(s): fd0 is 2.88M The reason is that the legacy io check happens very late, when part of the floppy stuff is already initialized. check_legacy_ioport() returns either -ENODEV right away, or it walks the device-tree looking for a floppy node. Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-31 21:27:41 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: don't call alloc_ordered_workqueue inside the alloc_disk loop Since commit 070ad7e ("floppy: convert to delayed work and single-thread wq"), we end up calling alloc_ordered_workqueue multiple times inside the loop, which shouldn't be intended. Besides the leak, other side effect in the current code is if blk_init_queue fails, we would end up calling unregister_blkdev even if we didn't call yet register_blkdev. Just moved the allocation of floppy_wq before the loop, and adjusted the code accordingly. Cc: stable@vger.kernel.org # 3.5+ Acked-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-27 20:56:51 -03:00
floppy: remove dr, reuse drive on do_floppy_init This is a small cleanup, that also may turn error handling of unitialized disks more readable. We don't need a separate variable to track allocated disks, remove dr and reuse drive variable instead. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:36:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: remove dr, reuse drive on do_floppy_init This is a small cleanup, that also may turn error handling of unitialized disks more readable. We don't need a separate variable to track allocated disks, remove dr and reuse drive variable instead. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:36:07 +01:00
floppy: switch to one queue per drive instead of sharing a queue Pretty straight forward conversion. Note that we do round-robin between the drives that have available requests, before we simply used the drive that the IO scheduler told us to. Since the IO scheduler doesn't care about multiple devices per queue, the resulting sort would not have made sense. Fixed by Vivek to get rid of a double lock problem in set_next_request() Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
2010-09-22 09:32:36 +02:00
floppy: don't call alloc_ordered_workqueue inside the alloc_disk loop Since commit 070ad7e ("floppy: convert to delayed work and single-thread wq"), we end up calling alloc_ordered_workqueue multiple times inside the loop, which shouldn't be intended. Besides the leak, other side effect in the current code is if blk_init_queue fails, we would end up calling unregister_blkdev even if we didn't call yet register_blkdev. Just moved the allocation of floppy_wq before the loop, and adjusted the code accordingly. Cc: stable@vger.kernel.org # 3.5+ Acked-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-27 20:56:51 -03:00
floppy: switch to one queue per drive instead of sharing a queue Pretty straight forward conversion. Note that we do round-robin between the drives that have available requests, before we simply used the drive that the IO scheduler told us to. Since the IO scheduler doesn't care about multiple devices per queue, the resulting sort would not have made sense. Fixed by Vivek to get rid of a double lock problem in set_next_request() Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
2010-09-22 09:32:36 +02:00
block: don't set bounce limit in blk_init_queue Instead move it to the callers. Those that either don't use bio_data() or page_address() or are specific to architectures that do not support highmem are skipped. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-19 09:26:26 +02:00
floppy: remove dr, reuse drive on do_floppy_init This is a small cleanup, that also may turn error handling of unitialized disks more readable. We don't need a separate variable to track allocated disks, remove dr and reuse drive variable instead. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:36:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block/floppy: Convert callback to pass timer_list In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to passing in the timer pointer explicitly. Calculate the drive from the offset of the timer in the timer list. Cc: Jiri Kosina <jikos@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Geliang Tang <geliangtang@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-04 17:49:29 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] devfs: Remove devfs_remove() function from the kernel tree Removes the devfs_remove() function and all callers of it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 21:15:16 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: fix hibernation Based on Ingo Molnar's patch from 2006, this makes the floppy work after resume from hibernation, at least on my machine. This fix resets the floppy controller on resume. It was experimentally determined to bring the controller back to life - we don't really know why it works. floppy_init() does the same thing at boot/modprobe time. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-10 12:57:09 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove unnecessary argument from [__]reschedule_timeout Prior to patch "drivers/block/floppy.c: Use pr_<level>" only reschedule_timeout(,"request done"...) printed a numeric value after a reschedule_timeout event message. Restore that behavior and remove the now unnecessary argument. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:03 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove CLEARSTRUCT macro, use memset Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: indent a comment Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:51 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: remove CLEARSTRUCT macro, use memset Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
drivers/block/floppy.c: remove [U]CLEARF, [U]SETF, and [U]TESTF macros Use clear_bit, set_bit, and test_bit functions directly Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:55 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: request and release only the ports we actually use The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: Adam M Belay <abelay@mit.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 14:48:36 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: request and release only the ports we actually use The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: Adam M Belay <abelay@mit.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 14:48:36 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int 1/0 to bool true/false Various functions use int where bool is appropriate lock_fdc, wait_til_done, poll_drive, user_reset_fdc Convert to bool. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:58 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: convert int initialising to bool initialized Don't initialize initialized either. Default is false. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:21:00 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use common function to check if floppies can be registered The same checks to see if a drive can be or is registered are repeated through the code, factor out the checks in a common function and replace the repeated checks with it. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-27 20:56:55 -03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] Floppy: Add cmos attribute to floppy driver Currently only a device 'fdX' shows up in sysfs; the other possible device for this drive (like fd0h1440 etc) must be guessed from there. This patch corrects the floppy driver to create a platform device for each floppy found; each platform device also has an attribute 'cmos' which represents the cmos type for this drive. From this attribute the other possible device types can be computed. From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-15 10:09:25 +02:00
floppy: Avoid manual call of device_create_file() Use the static attribute groups assigned to the device instead of calling device_create_file() after the device registration. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-02 17:08:45 +01:00
[PATCH] Floppy: Add cmos attribute to floppy driver Currently only a device 'fdX' shows up in sysfs; the other possible device for this drive (like fd0h1440 etc) must be guessed from there. This patch corrects the floppy driver to create a platform device for each floppy found; each platform device also has an attribute 'cmos' which represents the cmos type for this drive. From this attribute the other possible device types can be computed. From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-15 10:09:25 +02:00
floppy: properly handle failure on add_disk loop On floppy initialization, if something failed inside the loop we call add_disk, there was no cleanup of previous iterations in the error handling. Cc: stable@vger.kernel.org Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-27 20:56:54 -03:00
[PATCH] Floppy: Add cmos attribute to floppy driver Currently only a device 'fdX' shows up in sysfs; the other possible device for this drive (like fd0h1440 etc) must be guessed from there. This patch corrects the floppy driver to create a platform device for each floppy found; each platform device also has an attribute 'cmos' which represents the cmos type for this drive. From this attribute the other possible device types can be computed. From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-15 10:09:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
block: convert to device_add_disk() For block drivers that specify a parent device, convert them to use device_add_disk(). This conversion was done with the following semantic patch: @@ struct gendisk *disk; expression E; @@ - disk->driverfs_dev = E; ... - add_disk(disk); + device_add_disk(E, disk); @@ struct gendisk *disk; expression E1, E2; @@ - disk->driverfs_dev = E1; ... E2 = disk; ... - add_disk(E2); + device_add_disk(E1, E2); ...plus some manual fixups for a few missed conversions. Cc: Jens Axboe <axboe@fb.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-15 19:44:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: properly handle failure on add_disk loop On floppy initialization, if something failed inside the loop we call add_disk, there was no cleanup of previous iterations in the error handling. Cc: stable@vger.kernel.org Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-27 20:56:54 -03:00
floppy: use common function to check if floppies can be registered The same checks to see if a drive can be or is registered are repeated through the code, factor out the checks in a common function and replace the repeated checks with it. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-27 20:56:55 -03:00
floppy: properly handle failure on add_disk loop On floppy initialization, if something failed inside the loop we call add_disk, there was no cleanup of previous iterations in the error handling. Cc: stable@vger.kernel.org Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-27 20:56:54 -03:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
floppy: use atomic type for usage_count The usage_count was being protected by a lock which was only there to create an atomic counter. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: fix hibernation Based on Ingo Molnar's patch from 2006, this makes the floppy work after resume from hibernation, at least on my machine. This fix resets the floppy controller on resume. It was experimentally determined to bring the controller back to life - we don't really know why it works. floppy_init() does the same thing at boot/modprobe time. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-10 12:57:09 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: destroy floppy workqueue before cleaning up the queue We need to first destroy the floppy_wq workqueue before cleaning up the queue. Otherwise we might race with still pending work with the workqueue, but all the block queue already gone. This might lead to various oopses, such as CPU 0 Pid: 6, comm: kworker/u:0 Not tainted 3.7.0-rc4 #1 Bochs Bochs RIP: 0010:[<ffffffff8134eef5>] [<ffffffff8134eef5>] blk_peek_request+0xd5/0x1c0 RSP: 0000:ffff88000dc7dd88 EFLAGS: 00010092 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88000f602688 RSI: ffffffff81fd95d8 RDI: 6b6b6b6b6b6b6b6b RBP: ffff88000dc7dd98 R08: ffffffff81fd95c8 R09: 0000000000000000 R10: ffffffff81fd9480 R11: 0000000000000001 R12: 6b6b6b6b6b6b6b6b R13: ffff88000dc7dfd8 R14: ffff88000dc7dfd8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001e11000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/u:0 (pid: 6, threadinfo ffff88000dc7c000, task ffff88000dc5ecc0) Stack: 0000000000000000 0000000000000000 ffff88000dc7ddb8 ffffffff8134efee ffff88000dc7ddb8 0000000000000000 ffff88000dc7dde8 ffffffff814aef3c ffffffff81e75d80 ffff88000dc0c640 ffff88000fbfb000 ffffffff814aed90 Call Trace: [<ffffffff8134efee>] blk_fetch_request+0xe/0x30 [<ffffffff814aef3c>] redo_fd_request+0x1ac/0x400 [<ffffffff814aed90>] ? start_motor+0x130/0x130 [<ffffffff8106b526>] process_one_work+0x136/0x450 [<ffffffff8106af65>] ? manage_workers+0x205/0x2e0 [<ffffffff8106bb6d>] worker_thread+0x14d/0x420 [<ffffffff8106ba20>] ? rescuer_thread+0x1a0/0x1a0 [<ffffffff8107075a>] kthread+0xba/0xc0 [<ffffffff810706a0>] ? __kthread_parkme+0x80/0x80 [<ffffffff818b553a>] ret_from_fork+0x7a/0xb0 [<ffffffff810706a0>] ? __kthread_parkme+0x80/0x80 Code: 0f 84 c0 00 00 00 83 f8 01 0f 85 e2 00 00 00 81 4b 40 00 00 80 00 48 89 df e8 58 f8 ff ff be fb ff ff ff fe ff ff <49> 8b 1c 24 49 39 dc 0f 85 2e ff ff ff 41 0f b6 84 24 28 04 00 RIP [<ffffffff8134eef5>] blk_peek_request+0xd5/0x1c0 RSP <ffff88000dc7dd88> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-06 11:47:13 +01:00
floppy: remove dr, reuse drive on do_floppy_init This is a small cleanup, that also may turn error handling of unitialized disks more readable. We don't need a separate variable to track allocated disks, remove dr and reuse drive variable instead. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:36:07 +01:00
floppy: Cleanup disk->queue before caling put_disk() if add_disk() was never called add_disk() takes gendisk reference on request queue. If driver failed during initialization and never called add_disk() then that extra reference is not taken. That reference is put in put_disk(). floppy driver allocates the disk, allocates queue, sets disk->queue and then relizes that floppy controller is not present. It tries to tear down everything and tries to put a reference down in put_disk() which was never taken. In such error cases cleanup disk->queue before calling put_disk() so that we never try to put down a reference which was never taken in first place. Reported-and-tested-by: Suresh Jayaraman <sjayaraman@suse.com> Tested-by: Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-08 20:03:38 +01:00
floppy: remove dr, reuse drive on do_floppy_init This is a small cleanup, that also may turn error handling of unitialized disks more readable. We don't need a separate variable to track allocated disks, remove dr and reuse drive variable instead. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:36:07 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: Run floppy initialization asynchronous floppy_init is quite slow, 3s on my test system to determine that there is no floppy. Run it asynchronous to the other init calls to improve boot time. [jkosina@suse.cz: fix modular build] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-02 17:27:04 -07:00
floppy: request and release only the ports we actually use The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: Adam M Belay <abelay@mit.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 14:48:36 -08:00
drivers/block/floppy.c: comment neatening and remove naked ; Spacing, column alignment and a for loop with a naked semicolon converted to an assign and while Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
floppy: request and release only the ports we actually use The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: Adam M Belay <abelay@mit.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 14:48:36 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use atomic type for usage_count The usage_count was being protected by a lock which was only there to create an atomic counter. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] drivers/block/floppy.c: dont free_irq() from irq context free_irq() should not be executed from softirq context. Found by the lock validator. The fix is to push fd_free_irq() into keventd. The code validates fine with this patch applied. (akpm: this is revolting, but so is floppy.c) [akpm@osdl.org: added flush_scheduled_work()] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 01:36:54 -08:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
[PATCH] drivers/block/floppy.c: dont free_irq() from irq context free_irq() should not be executed from softirq context. Found by the lock validator. The fix is to push fd_free_irq() into keventd. The code validates fine with this patch applied. (akpm: this is revolting, but so is floppy.c) [akpm@osdl.org: added flush_scheduled_work()] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 01:36:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use atomic type for usage_count The usage_count was being protected by a lock which was only there to create an atomic counter. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: tolerate DMA channel unavailability The floppy driver is already written to be able to operate in virtual DMA mode. Thus it can easily be adjusted to tolerate failure from fd_request_dma() as long as virtual DMA mode is not disallowed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:27:32 -07:00
floppy: use atomic type for usage_count The usage_count was being protected by a lock which was only there to create an atomic counter. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
floppy: tolerate DMA channel unavailability The floppy driver is already written to be able to operate in virtual DMA mode. Thus it can easily be adjusted to tolerate failure from fd_request_dma() as long as virtual DMA mode is not disallowed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:27:32 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: request and release only the ports we actually use The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: Adam M Belay <abelay@mit.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 14:48:36 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: do a very minimal style cleanup of the floppy driver Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 23:30:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: request and release only the ports we actually use The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: Adam M Belay <abelay@mit.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 14:48:36 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: request and release only the ports we actually use The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: Adam M Belay <abelay@mit.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 14:48:36 -08:00
floppy: use atomic type for usage_count The usage_count was being protected by a lock which was only there to create an atomic counter. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use atomic type for usage_count The usage_count was being protected by a lock which was only there to create an atomic counter. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use atomic type for usage_count The usage_count was being protected by a lock which was only there to create an atomic counter. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] lockdep: floppy.c irq release fix The lock validator triggered a number of bugs in the floppy driver, all related to the floppy driver allocating and freeing irq and dma resources from interrupt context. The initial solution was to use schedule_work() to push this into process context, but this caused further problems: for example the current floppy driver in -mm2 is totally broken and all floppy commands time out with an error. (as reported by Barry K. Nathan) This patch tries another solution: simply get rid of all that dynamic IRQ and DMA allocation/freeing. I doubt it made much sense back in the heydays of floppies (if two devices raced for DMA or IRQ resources then we didnt handle those cases too gracefully anyway), and today it makes near zero sense. So the new code does the simplest and most straightforward thing: allocate IRQ and DMA resources at module init time, and free them at module removal time. Dont try to release while the driver is operational. This, besides making the floppy driver functional again has an added bonus, floppy IRQ stats are finally persistent and visible in /proc/interrupts: 6: 63 XT-PIC-level floppy Besides normal floppy IO i have also tested IO error handling, motor-off timeouts, etc. - and everything seems to be working fine. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:23 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
WorkStruct: Merge the pending bit into the wq_data pointer Reclaim a word from the size of the work_struct by folding the pending bit and the wq_data pointer together. This shouldn't cause misalignment problems as all pointers should be at least 4-byte aligned. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:54:49 +00:00
drivers/block/floppy.c: use pr_<level> Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:46 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: request and release only the ports we actually use The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: Adam M Belay <abelay@mit.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 14:48:36 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: comment neatening and remove naked ; Spacing, column alignment and a for loop with a naked semicolon converted to an assign and while Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:50 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: replace init_module&cleanup_module with module_init&module_exit Replace init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 00:59:21 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: replace init_module&cleanup_module with module_init&module_exit Replace init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 00:59:21 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: replace init_module&cleanup_module with module_init&module_exit Replace init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 00:59:21 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: fix hibernation Based on Ingo Molnar's patch from 2006, this makes the floppy work after resume from hibernation, at least on my machine. This fix resets the floppy controller on resume. It was experimentally determined to bring the controller back to life - we don't really know why it works. floppy_init() does the same thing at boot/modprobe time. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-10 12:57:09 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: destroy floppy workqueue before cleaning up the queue We need to first destroy the floppy_wq workqueue before cleaning up the queue. Otherwise we might race with still pending work with the workqueue, but all the block queue already gone. This might lead to various oopses, such as CPU 0 Pid: 6, comm: kworker/u:0 Not tainted 3.7.0-rc4 #1 Bochs Bochs RIP: 0010:[<ffffffff8134eef5>] [<ffffffff8134eef5>] blk_peek_request+0xd5/0x1c0 RSP: 0000:ffff88000dc7dd88 EFLAGS: 00010092 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88000f602688 RSI: ffffffff81fd95d8 RDI: 6b6b6b6b6b6b6b6b RBP: ffff88000dc7dd98 R08: ffffffff81fd95c8 R09: 0000000000000000 R10: ffffffff81fd9480 R11: 0000000000000001 R12: 6b6b6b6b6b6b6b6b R13: ffff88000dc7dfd8 R14: ffff88000dc7dfd8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001e11000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/u:0 (pid: 6, threadinfo ffff88000dc7c000, task ffff88000dc5ecc0) Stack: 0000000000000000 0000000000000000 ffff88000dc7ddb8 ffffffff8134efee ffff88000dc7ddb8 0000000000000000 ffff88000dc7dde8 ffffffff814aef3c ffffffff81e75d80 ffff88000dc0c640 ffff88000fbfb000 ffffffff814aed90 Call Trace: [<ffffffff8134efee>] blk_fetch_request+0xe/0x30 [<ffffffff814aef3c>] redo_fd_request+0x1ac/0x400 [<ffffffff814aed90>] ? start_motor+0x130/0x130 [<ffffffff8106b526>] process_one_work+0x136/0x450 [<ffffffff8106af65>] ? manage_workers+0x205/0x2e0 [<ffffffff8106bb6d>] worker_thread+0x14d/0x420 [<ffffffff8106ba20>] ? rescuer_thread+0x1a0/0x1a0 [<ffffffff8107075a>] kthread+0xba/0xc0 [<ffffffff810706a0>] ? __kthread_parkme+0x80/0x80 [<ffffffff818b553a>] ret_from_fork+0x7a/0xb0 [<ffffffff810706a0>] ? __kthread_parkme+0x80/0x80 Code: 0f 84 c0 00 00 00 83 f8 01 0f 85 e2 00 00 00 81 4b 40 00 00 80 00 48 89 df e8 58 f8 ff ff be fb ff ff ff fe ff ff <49> 8b 1c 24 49 39 dc 0f 85 2e ff ff ff 41 0f b6 84 24 28 04 00 RIP [<ffffffff8134eef5>] blk_peek_request+0xd5/0x1c0 RSP <ffff88000dc7dd88> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-06 11:47:13 +01:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use common function to check if floppies can be registered The same checks to see if a drive can be or is registered are repeated through the code, factor out the checks in a common function and replace the repeated checks with it. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-27 20:56:55 -03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] Floppy: Add cmos attribute to floppy driver Currently only a device 'fdX' shows up in sysfs; the other possible device for this drive (like fd0h1440 etc) must be guessed from there. This patch corrects the floppy driver to create a platform device for each floppy found; each platform device also has an attribute 'cmos' which represents the cmos type for this drive. From this attribute the other possible device types can be computed. From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-15 10:09:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: switch to one queue per drive instead of sharing a queue Pretty straight forward conversion. Note that we do round-robin between the drives that have available requests, before we simply used the drive that the IO scheduler told us to. Since the IO scheduler doesn't care about multiple devices per queue, the resulting sort would not have made sense. Fixed by Vivek to get rid of a double lock problem in set_next_request() Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
2010-09-22 09:32:36 +02:00
floppy: Fix a crash during rmmod floppy driver does not call add_disk() on all the drives hence we don't take gendisk reference on request queue for these drives. Don't call put_disk() with disk->queue set, otherwise we try to put the reference we never took. Reported-and-tested-by: Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de> Signed-off-by: Vivek Goyal<vgoyal@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-08 20:03:39 +01:00
floppy: fix another use-after-free While scanning the floopy code due to c093ee4f07f4 ("floppy: fix use-after-free in module load failure path"), I found one more instance of trying to access disk->queue pointer after doing put_disk() on gendisk. For some reason , floppy moule still loads/unloads fine. The object is probably still around with right pointer values. o There seems to be one more instance of trying to cleanup the request queue after we have called put_disk() on associated gendisk. o This fix is more out of code inspection. Even without this fix for some reason I am able to load/unload floppy module without any issues. o Floppy module loads/unloads fine after the fix. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-06 08:16:05 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: convert to delayed work and single-thread wq There are several races in floppy driver between bottom half (scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness of the actual floppy devices, those races are never (at least to my knowledge) triggered on a bare floppy metal. However on virtualized (emulated) floppy drives, which are of course magnitudes faster than the real ones, these races trigger reliably. They usually exhibit themselves as NULL pointer dereferences during DMA setup, such as BUG: unable to handle kernel NULL pointer dereference at 0000000a [ ... snip ... ] EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0 EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000) Stack: ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40 Call Trace: [<c020470f>] dump_trace+0xaf/0x110 [<c020526b>] show_trace_log_lvl+0x4b/0x60 [<c0205298>] show_trace+0x18/0x20 [<c05c5811>] dump_stack+0x6d/0x72 [<c0248527>] warn_slowpath_common+0x77/0xb0 [<c02485f3>] warn_slowpath_fmt+0x33/0x40 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy] [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy] [<c0256d08>] run_timer_softirq+0x168/0x2a0 [<c024e762>] __do_softirq+0xc2/0x1c0 [<c02042ed>] do_softirq+0x7d/0xb0 [<f54d8a00>] 0xf54d89ff but other instances can be easily seen as well. This can be observed at least under VMWare, VirtualBox and KVM. This patch converts all the timers and bottom halfs to be processed in a single workqueue. This aproach has been already discussed back in 2010 if I remember correctly, and Acked by Linus [1], but it then never made it to the tree. This all is based on original idea and code of Stephen Hemminger. I have ported original Stepen's code to the current state of the floppy driver, and performed quite some testing (on real hardware), which didn't reveal any issues (this includes not only writing and reading data, but also formatting (unfortunately I didn't find any Double-Density disks any more)). Ability to handle errors properly (supplying known bad floppies) has also been verified. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092 Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-18 13:50:25 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: use atomic type for usage_count The usage_count was being protected by a lock which was only there to create an atomic counter. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15 13:21:11 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
drivers/block/floppy.c: replace init_module&cleanup_module with module_init&module_exit Replace init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 00:59:21 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
floppy: provide a PNP device table in the module. The missing device table means that the floppy module is not auto-loaded, even when the appropriate PNP device (0700) is found. We don't actually use the table in the module, since the device doesn't have a struct pnp_driver, but it's sufficient to cause an alias in the module that udev/modprobe will use. Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Philippe De Muyter <phdm@macqel.be> Acked-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 16:56:47 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
floppy: provide a PNP device table in the module. The missing device table means that the floppy module is not auto-loaded, even when the appropriate PNP device (0700) is found. We don't actually use the table in the module, since the device doesn't have a struct pnp_driver, but it's sufficient to cause an alias in the module that udev/modprobe will use. Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Philippe De Muyter <phdm@macqel.be> Acked-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 16:56:47 -07:00
drivers/block/floppy.c: #define space and column neatening Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 15:20:45 -08:00
floppy: provide a PNP device table in the module. The missing device table means that the floppy module is not auto-loaded, even when the appropriate PNP device (0700) is found. We don't actually use the table in the module, since the device doesn't have a struct pnp_driver, but it's sufficient to cause an alias in the module that udev/modprobe will use. Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Philippe De Muyter <phdm@macqel.be> Acked-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 16:56:47 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00