kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-26 18:16:26 +00:00
Code Issues Releases Packages Activity
linux/drivers/clocksource/qcom-timer.c

258 lines
6.4 KiB
Raw Permalink Normal View History

msm: timer: Use GPT for clockevents and DGT for clocksource The clocksource shouldn't stop ticking when the clockevent stops. This is exactly what happens today with MSM timers. The same hardware is used for both the clockevent and the clocksource because the ratings of the two are the same. Fix this by registering a clockevent based on the GPT and a clocksource based on the DGT. This removes any other possible configuration (e.g. a GPT clocksource and a DGT clockevent) but that shouldn't be a big issue since we want higher precision timing than high precision scheduling interrupts. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:05 -08:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
clocksource: qcom: Move clocksource code out of mach-msm We intend to share the clocksource code for MSM platforms between legacy and multiplatform supported qcom SoCs. Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-01-29 16:17:30 -06:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
msm: timer: Cleanup #includes and #defines Remove unused/unnecessary #defines, #includes, and use the BIT macro appropriately. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:04 -08:00
ARM: msm: Divorce msm_timer from local timer API Separate the msm_timer from the local timer API. This will allow us to remove ARM local timer support in the near future and gets us closer to moving this driver to drivers/clocksource. Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-02-15 17:31:31 -08:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
[ARM] Convert asm/io.h to linux/io.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-06 12:10:45 +01:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
sched_clock: Make ARM's sched_clock generic for all architectures Nothing about the sched_clock implementation in the ARM port is specific to the architecture. Generalize the code so that other architectures can use it by selecting GENERIC_SCHED_CLOCK. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [jstultz: Merge minor collisions with other patches in my tree] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-06-01 23:39:40 -07:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
clocksource: qcom: Implement read_current_timer for udelay Setup the same timer used as the clocksource to be used as the read_current_timer implementation. This allows us to support a stable udelay implementation on MSMs where it's possible for the CPUs to scale speeds independently of one another. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-05-13 16:01:00 -07:00
ARM: msm: Wait for timer clear to complete Without looping on the status bit, there is no way to guarantee that a clear of the timer has actually completed. This can cause us to enable the timer before the count has cleared and miss a timer interrupt. To simplify this patch, remove the timer register setup done during timer init, since it's duplicate work that is eventually done in the set_next_event() callback. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-14 20:31:39 -07:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
msm: timer: support 8x60 timers Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-05 15:23:57 -07:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
ARM: msm: Wait for timer clear to complete Without looping on the status bit, there is no way to guarantee that a clear of the timer has actually completed. This can cause us to enable the timer before the count has cleared and miss a timer interrupt. To simplify this patch, remove the timer register setup done during timer init, since it's duplicate work that is eventually done in the set_next_event() callback. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-14 20:31:39 -07:00
msm: timer: Fix ONESHOT mode interrupts MSM timers don't support an interrupt enable/disable bit. Therefore, when the timer is free running it's possible for the count to wrap and the match value to match again even though a set_next_event() call hasn't been made since the last match. Workaround the lack of an interrupt enable bit by explicitly stopping the timer in the interrupt handler when the clockevent is in ONESHOT mode. This should prevent any possibility of the timer wrapping and matching more than once per set_next_event(). Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:06 -08:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
ARM: msm: Divorce msm_timer from local timer API Separate the msm_timer from the local timer API. This will allow us to remove ARM local timer support in the near future and gets us closer to moving this driver to drivers/clocksource. Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-02-15 17:31:31 -08:00
msm: timer: Fix ONESHOT mode interrupts MSM timers don't support an interrupt enable/disable bit. Therefore, when the timer is free running it's possible for the count to wrap and the match value to match again even though a set_next_event() call hasn't been made since the last match. Workaround the lack of an interrupt enable bit by explicitly stopping the timer in the interrupt handler when the clockevent is in ONESHOT mode. This should prevent any possibility of the timer wrapping and matching more than once per set_next_event(). Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:06 -08:00
clockevents/drivers/qcom: Migrate to new 'set-state' interface Migrate qcom driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Periodic mode isn't supported by the driver and so the callback isn't provided anymore. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-18 16:24:31 +05:30
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
msm: timer: Fix ONESHOT mode interrupts MSM timers don't support an interrupt enable/disable bit. Therefore, when the timer is free running it's possible for the count to wrap and the match value to match again even though a set_next_event() call hasn't been made since the last match. Workaround the lack of an interrupt enable bit by explicitly stopping the timer in the interrupt handler when the clockevent is in ONESHOT mode. This should prevent any possibility of the timer wrapping and matching more than once per set_next_event(). Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:06 -08:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
msm: timer: Fix ONESHOT mode interrupts MSM timers don't support an interrupt enable/disable bit. Therefore, when the timer is free running it's possible for the count to wrap and the match value to match again even though a set_next_event() call hasn't been made since the last match. Workaround the lack of an interrupt enable bit by explicitly stopping the timer in the interrupt handler when the clockevent is in ONESHOT mode. This should prevent any possibility of the timer wrapping and matching more than once per set_next_event(). Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:06 -08:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
ARM: msm: Stop counting before reprogramming clockevent If the clockevent is forcibly reprogrammed to have a different match value we mistakenly assume the timer is not ticking and program a new match value while the timer is running. Although we clear the timer before programming a new match, it's better to stop the timer before clearing it so that we're sure the proper amount of ticks are counted. Failure to do so can lead to missed ticks and system hangs. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-14 20:31:37 -07:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
ARM: msm: Wait for timer clear to complete Without looping on the status bit, there is no way to guarantee that a clear of the timer has actually completed. This can cause us to enable the timer before the count has cleared and miss a timer interrupt. To simplify this patch, remove the timer register setup done during timer init, since it's duplicate work that is eventually done in the set_next_event() callback. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-14 20:31:39 -07:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
clockevents/drivers/qcom: Migrate to new 'set-state' interface Migrate qcom driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Periodic mode isn't supported by the driver and so the callback isn't provided anymore. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-18 16:24:31 +05:30
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
msm: timer: Fix ONESHOT mode interrupts MSM timers don't support an interrupt enable/disable bit. Therefore, when the timer is free running it's possible for the count to wrap and the match value to match again even though a set_next_event() call hasn't been made since the last match. Workaround the lack of an interrupt enable bit by explicitly stopping the timer in the interrupt handler when the clockevent is in ONESHOT mode. This should prevent any possibility of the timer wrapping and matching more than once per set_next_event(). Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:06 -08:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
msm: timer: Fix ONESHOT mode interrupts MSM timers don't support an interrupt enable/disable bit. Therefore, when the timer is free running it's possible for the count to wrap and the match value to match again even though a set_next_event() call hasn't been made since the last match. Workaround the lack of an interrupt enable bit by explicitly stopping the timer in the interrupt handler when the clockevent is in ONESHOT mode. This should prevent any possibility of the timer wrapping and matching more than once per set_next_event(). Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:06 -08:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
clockevents/drivers/qcom: Migrate to new 'set-state' interface Migrate qcom driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Periodic mode isn't supported by the driver and so the callback isn't provided anymore. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-18 16:24:31 +05:30
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
ARM: msm: Divorce msm_timer from local timer API Separate the msm_timer from the local timer API. This will allow us to remove ARM local timer support in the near future and gets us closer to moving this driver to drivers/clocksource. Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-02-15 17:31:31 -08:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
clocksource: Use a plain u64 instead of cycle_t There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-21 20:32:01 +01:00
msm: timer: Remove SoC specific #ifdefs The timer frequency is currently ifdefed in addition to setting the DGT clock's divider value on SCORPIONMP targets. Setup the frequency dynamically using the existing cpu_is_*() branches and assign a custom clocksource read function for 7x01a to get the shift out of the generic path. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:08 -08:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
msm: timer: Remove SoC specific #ifdefs The timer frequency is currently ifdefed in addition to setting the DGT clock's divider value on SCORPIONMP targets. Setup the frequency dynamically using the existing cpu_is_*() branches and assign a custom clocksource read function for 7x01a to get the shift out of the generic path. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:08 -08:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
ARM: msm: Divorce msm_timer from local timer API Separate the msm_timer from the local timer API. This will allow us to remove ARM local timer support in the near future and gets us closer to moving this driver to drivers/clocksource. Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-02-15 17:31:31 -08:00
clocksource/qcom-timer: Convert to hotplug state machine Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153336.295486558@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 17:16:43 +00:00
ARM: local timers: convert MSM to runtime registration interface Convert the MSM timers to the runtime registration interface. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-01-10 19:44:19 +00:00
clocksource/qcom-timer: Convert to hotplug state machine Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153336.295486558@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 17:16:43 +00:00
ARM: msm: Divorce msm_timer from local timer API Separate the msm_timer from the local timer API. This will allow us to remove ARM local timer support in the near future and gets us closer to moving this driver to drivers/clocksource. Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-02-15 17:31:31 -08:00
clockevents/drivers/qcom: Migrate to new 'set-state' interface Migrate qcom driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Periodic mode isn't supported by the driver and so the callback isn't provided anymore. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-18 16:24:31 +05:30
ARM: local timers: convert MSM to runtime registration interface Convert the MSM timers to the runtime registration interface. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-01-10 19:44:19 +00:00
ARM: msm: Divorce msm_timer from local timer API Separate the msm_timer from the local timer API. This will allow us to remove ARM local timer support in the near future and gets us closer to moving this driver to drivers/clocksource. Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-02-15 17:31:31 -08:00
ARM: local timers: convert MSM to runtime registration interface Convert the MSM timers to the runtime registration interface. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-01-10 19:44:19 +00:00
clocksource/qcom-timer: Convert to hotplug state machine Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153336.295486558@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 17:16:43 +00:00
ARM: local timers: convert MSM to runtime registration interface Convert the MSM timers to the runtime registration interface. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-01-10 19:44:19 +00:00
clocksource/qcom-timer: Convert to hotplug state machine Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153336.295486558@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 17:16:43 +00:00
clockevents/drivers/qcom: Migrate to new 'set-state' interface Migrate qcom driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Periodic mode isn't supported by the driver and so the callback isn't provided anymore. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-18 16:24:31 +05:30
ARM: local timers: convert MSM to runtime registration interface Convert the MSM timers to the runtime registration interface. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-01-10 19:44:19 +00:00
clocksource/qcom-timer: Convert to hotplug state machine Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153336.295486558@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 17:16:43 +00:00
ARM: local timers: convert MSM to runtime registration interface Convert the MSM timers to the runtime registration interface. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-01-10 19:44:19 +00:00
ARM: msm: Switch to sched_clock_register() The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-11-15 15:26:16 -08:00
msm: timer: Support sched_clock() Now that sched_clock is mandatory on ARM it's simple to add sched_clock support to the MSM timer code. Add it so that we get more accurate sched_clock output than the jiffies based version that's provided by default. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-22 01:39:37 +00:00
clocksource: qcom: Implement read_current_timer for udelay Setup the same timer used as the clocksource to be used as the read_current_timer implementation. This allows us to support a stable udelay implementation on MSMs where it's possible for the CPUs to scale speeds independently of one another. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-05-13 16:01:00 -07:00
clocksource/drivers/qcom: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:43 +02:00
ARM: msm: Allow timer.c to compile on multiple targets The timer code relies on #defines from mach/iomap.h, cpu_is_*() checks, and a global irq #define. All this makes this file impossible to compile in a mult-target build. Therefore, make a sys_timer struct for each SoC so that machine descriptors can reference the correct timer. Then go through and replace all the defines with raw values that are passed to a common initialization function. This paves the way to adding DT support to this code as well as allows us to compile this file on multiple targets at the same time. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:52 -07:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
ARM: msm: Divorce msm_timer from local timer API Separate the msm_timer from the local timer API. This will allow us to remove ARM local timer support in the near future and gets us closer to moving this driver to drivers/clocksource. Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-02-15 17:31:31 -08:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
ARM: msm: Divorce msm_timer from local timer API Separate the msm_timer from the local timer API. This will allow us to remove ARM local timer support in the near future and gets us closer to moving this driver to drivers/clocksource. Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-02-15 17:31:31 -08:00
msm: timer: Use GPT for clockevents and DGT for clocksource The clocksource shouldn't stop ticking when the clockevent stops. This is exactly what happens today with MSM timers. The same hardware is used for both the clockevent and the clocksource because the ratings of the two are the same. Fix this by registering a clockevent based on the GPT and a clocksource based on the DGT. This removes any other possible configuration (e.g. a GPT clocksource and a DGT clockevent) but that shouldn't be a big issue since we want higher precision timing than high precision scheduling interrupts. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:05 -08:00
ARM: msm: Divorce msm_timer from local timer API Separate the msm_timer from the local timer API. This will allow us to remove ARM local timer support in the near future and gets us closer to moving this driver to drivers/clocksource. Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-02-15 17:31:31 -08:00
clocksource/qcom-timer: Convert to hotplug state machine Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153336.295486558@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 17:16:43 +00:00
cpu/hotplug: Cleanup state names When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-21 20:19:54 +01:00
clocksource/qcom-timer: Convert to hotplug state machine Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153336.295486558@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 17:16:43 +00:00
ARM: msm: Divorce msm_timer from local timer API Separate the msm_timer from the local timer API. This will allow us to remove ARM local timer support in the near future and gets us closer to moving this driver to drivers/clocksource. Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-02-15 17:31:31 -08:00
msm: timer: Use GPT for clockevents and DGT for clocksource The clocksource shouldn't stop ticking when the clockevent stops. This is exactly what happens today with MSM timers. The same hardware is used for both the clockevent and the clocksource because the ratings of the two are the same. Fix this by registering a clockevent based on the GPT and a clocksource based on the DGT. This removes any other possible configuration (e.g. a GPT clocksource and a DGT clockevent) but that shouldn't be a big issue since we want higher precision timing than high precision scheduling interrupts. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:05 -08:00
ARM: gic, local timers: use the request_percpu_irq() interface This patch remove the hardcoded link between local timers and PPIs, and convert the PPI users (TWD, MCT and MSM timers) to the new *_percpu_irq interface. Also some collateral cleanup (local_timer_ack() is gone, and the interrupt handler is strictly private to each driver). PPIs are now useable for more than just the local timers. Additional testing by David Brown (msm8250 and msm8660) and Shawn Guo (imx6q). Cc: David Brown <davidb@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-07-22 12:52:37 +01:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
msm: timer: Use GPT for clockevents and DGT for clocksource The clocksource shouldn't stop ticking when the clockevent stops. This is exactly what happens today with MSM timers. The same hardware is used for both the clockevent and the clocksource because the ratings of the two are the same. Fix this by registering a clockevent based on the GPT and a clocksource based on the DGT. This removes any other possible configuration (e.g. a GPT clocksource and a DGT clockevent) but that shouldn't be a big issue since we want higher precision timing than high precision scheduling interrupts. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:05 -08:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
msm: timer: Remove SoC specific #ifdefs The timer frequency is currently ifdefed in addition to setting the DGT clock's divider value on SCORPIONMP targets. Setup the frequency dynamically using the existing cpu_is_*() branches and assign a custom clocksource read function for 7x01a to get the shift out of the generic path. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:08 -08:00
msm: timer: Use GPT for clockevents and DGT for clocksource The clocksource shouldn't stop ticking when the clockevent stops. This is exactly what happens today with MSM timers. The same hardware is used for both the clockevent and the clocksource because the ratings of the two are the same. Fix this by registering a clockevent based on the GPT and a clocksource based on the DGT. This removes any other possible configuration (e.g. a GPT clocksource and a DGT clockevent) but that shouldn't be a big issue since we want higher precision timing than high precision scheduling interrupts. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:05 -08:00
msm: timer: Remove msm_clocks[] and simplify code We can simplify the timer code now that we only use the DGT for the clocksource and the GPT for the clockevent. Get rid of the msm_clocks[] array and propagate the changes throughout the code. This reduces the lines of code in this file and improves readability. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08 10:34:07 -08:00
ARM: msm: Switch to sched_clock_register() The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-11-15 15:26:16 -08:00
clocksource: qcom: Implement read_current_timer for udelay Setup the same timer used as the clocksource to be used as the read_current_timer implementation. This allows us to support a stable udelay implementation on MSMs where it's possible for the CPUs to scale speeds independently of one another. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-05-13 16:01:00 -07:00
clocksource/drivers/qcom: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:43 +02:00
[ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland <swetland@google.com>
2007-11-26 04:11:58 -08:00
clocksource/drivers/qcom: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:43 +02:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
clocksource/drivers/qcom: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:43 +02:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
ARM: msm: Rework timer binding to be more general The msm timer binding I wrote is bad. First off, the clock frequency in the binding for the dgt is wrong. Software divides down the input rate by 4 to achieve the rate listed in the binding. We also treat each individual timer as a separate hardware component, when in reality there is one timer block (that may be duplicated per cpu) with multiple timers within it. Depending on the version of the hardware there can be one or two general purpose timers, status and divider control registers, and an entirely different register layout. In the next patch we'll need to know about the different register layouts so that we can properly check the status register after clearing the count. The current binding makes this complicated because the general purpose timer's reg property doesn't indicate where that status register is, and in fact it is beyond the size of the reg property. Clean all this up by just having one node for the timer hardware, and describe all the interrupts and clock frequencies supported while having one reg property that covers the entire timer register region. We'll use the compatible field in the future to determine different register layouts and if we should read the status registers, etc. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-14 20:31:38 -07:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
ARM: msm: Rework timer binding to be more general The msm timer binding I wrote is bad. First off, the clock frequency in the binding for the dgt is wrong. Software divides down the input rate by 4 to achieve the rate listed in the binding. We also treat each individual timer as a separate hardware component, when in reality there is one timer block (that may be duplicated per cpu) with multiple timers within it. Depending on the version of the hardware there can be one or two general purpose timers, status and divider control registers, and an entirely different register layout. In the next patch we'll need to know about the different register layouts so that we can properly check the status register after clearing the count. The current binding makes this complicated because the general purpose timer's reg property doesn't indicate where that status register is, and in fact it is beyond the size of the reg property. Clean all this up by just having one node for the timer hardware, and describe all the interrupts and clock frequencies supported while having one reg property that covers the entire timer register region. We'll use the compatible field in the future to determine different register layouts and if we should read the status registers, etc. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-14 20:31:38 -07:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
clocksource/drivers/qcom: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:43 +02:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
ARM: msm: Rework timer binding to be more general The msm timer binding I wrote is bad. First off, the clock frequency in the binding for the dgt is wrong. Software divides down the input rate by 4 to achieve the rate listed in the binding. We also treat each individual timer as a separate hardware component, when in reality there is one timer block (that may be duplicated per cpu) with multiple timers within it. Depending on the version of the hardware there can be one or two general purpose timers, status and divider control registers, and an entirely different register layout. In the next patch we'll need to know about the different register layouts so that we can properly check the status register after clearing the count. The current binding makes this complicated because the general purpose timer's reg property doesn't indicate where that status register is, and in fact it is beyond the size of the reg property. Clean all this up by just having one node for the timer hardware, and describe all the interrupts and clock frequencies supported while having one reg property that covers the entire timer register region. We'll use the compatible field in the future to determine different register layouts and if we should read the status registers, etc. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-14 20:31:38 -07:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
clocksource/drivers/qcom: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:43 +02:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
ARM: msm: Rework timer binding to be more general The msm timer binding I wrote is bad. First off, the clock frequency in the binding for the dgt is wrong. Software divides down the input rate by 4 to achieve the rate listed in the binding. We also treat each individual timer as a separate hardware component, when in reality there is one timer block (that may be duplicated per cpu) with multiple timers within it. Depending on the version of the hardware there can be one or two general purpose timers, status and divider control registers, and an entirely different register layout. In the next patch we'll need to know about the different register layouts so that we can properly check the status register after clearing the count. The current binding makes this complicated because the general purpose timer's reg property doesn't indicate where that status register is, and in fact it is beyond the size of the reg property. Clean all this up by just having one node for the timer hardware, and describe all the interrupts and clock frequencies supported while having one reg property that covers the entire timer register region. We'll use the compatible field in the future to determine different register layouts and if we should read the status registers, etc. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-14 20:31:38 -07:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
clocksource/drivers/qcom: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:43 +02:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
clocksource/drivers/qcom: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:43 +02:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
ARM: msm: Rework timer binding to be more general The msm timer binding I wrote is bad. First off, the clock frequency in the binding for the dgt is wrong. Software divides down the input rate by 4 to achieve the rate listed in the binding. We also treat each individual timer as a separate hardware component, when in reality there is one timer block (that may be duplicated per cpu) with multiple timers within it. Depending on the version of the hardware there can be one or two general purpose timers, status and divider control registers, and an entirely different register layout. In the next patch we'll need to know about the different register layouts so that we can properly check the status register after clearing the count. The current binding makes this complicated because the general purpose timer's reg property doesn't indicate where that status register is, and in fact it is beyond the size of the reg property. Clean all this up by just having one node for the timer hardware, and describe all the interrupts and clock frequencies supported while having one reg property that covers the entire timer register region. We'll use the compatible field in the future to determine different register layouts and if we should read the status registers, etc. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-14 20:31:38 -07:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
clocksource/drivers/qcom: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:43 +02:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
clocksource/drivers/qcom: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:43 +02:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
ARM: msm: Rework timer binding to be more general The msm timer binding I wrote is bad. First off, the clock frequency in the binding for the dgt is wrong. Software divides down the input rate by 4 to achieve the rate listed in the binding. We also treat each individual timer as a separate hardware component, when in reality there is one timer block (that may be duplicated per cpu) with multiple timers within it. Depending on the version of the hardware there can be one or two general purpose timers, status and divider control registers, and an entirely different register layout. In the next patch we'll need to know about the different register layouts so that we can properly check the status register after clearing the count. The current binding makes this complicated because the general purpose timer's reg property doesn't indicate where that status register is, and in fact it is beyond the size of the reg property. Clean all this up by just having one node for the timer hardware, and describe all the interrupts and clock frequencies supported while having one reg property that covers the entire timer register region. We'll use the compatible field in the future to determine different register layouts and if we should read the status registers, etc. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-14 20:31:38 -07:00
ARM: msm: Wait for timer clear to complete Without looping on the status bit, there is no way to guarantee that a clear of the timer has actually completed. This can cause us to enable the timer before the count has cleared and miss a timer interrupt. To simplify this patch, remove the timer register setup done during timer init, since it's duplicate work that is eventually done in the set_next_event() callback. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-14 20:31:39 -07:00
ARM: msm: Rework timer binding to be more general The msm timer binding I wrote is bad. First off, the clock frequency in the binding for the dgt is wrong. Software divides down the input rate by 4 to achieve the rate listed in the binding. We also treat each individual timer as a separate hardware component, when in reality there is one timer block (that may be duplicated per cpu) with multiple timers within it. Depending on the version of the hardware there can be one or two general purpose timers, status and divider control registers, and an entirely different register layout. In the next patch we'll need to know about the different register layouts so that we can properly check the status register after clearing the count. The current binding makes this complicated because the general purpose timer's reg property doesn't indicate where that status register is, and in fact it is beyond the size of the reg property. Clean all this up by just having one node for the timer hardware, and describe all the interrupts and clock frequencies supported while having one reg property that covers the entire timer register region. We'll use the compatible field in the future to determine different register layouts and if we should read the status registers, etc. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-14 20:31:38 -07:00
clocksource/drivers/qcom: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-06 17:58:43 +02:00
ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown <davidb@codeaurora.org>
2012-09-05 12:28:53 -07:00
clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-26 16:56:11 +02:00