kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-26 18:16:26 +00:00
Code Issues Releases Packages Activity
linux/drivers/clocksource/timer-u300.c

462 lines
16 KiB
Raw Permalink Normal View History

[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: 6296/1: clock U300 intcon and timer properly This removes the quirks to clock the U300 VIC and timer by custom hooks and moves the control out to the clock framework where it belongs. This is possible now that clocks are available early. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-05 07:58:58 +01:00
ARM: u300: convert to sparse IRQs This converts the U300 to use sparse IRQs, which is simple now that the number of machines are reduced. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-13 13:49:45 +02:00
ARM: u300: enable delaytimer on the U300 The U300 can support timer-based delays, so implement this. Skips past jiffy calibration. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-05 22:45:11 +02:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
sched_clock: Make ARM's sched_clock generic for all architectures Nothing about the sched_clock implementation in the ARM port is specific to the architecture. Generalize the code so that other architectures can use it by selecting GENERIC_SCHED_CLOCK. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [jstultz: Merge minor collisions with other patches in my tree] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-06-01 23:39:40 -07:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
ARM: u300: fix timekeeping when periodic mode is used To determine the value to write to the hardware's timer counter register the symbol CLOCK_TICK_RATE is used. This value is a dummy value on u300 though. So instead use the clock rate that is used for oneshot mode. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-05 10:03:19 +01:00
clockevents/drivers/u300: Migrate to new 'set-state' interface Migrate u300 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-18 16:24:52 +05:30
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
clockevents/drivers/u300: Migrate to new 'set-state' interface Migrate u300 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-18 16:24:52 +05:30
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
clockevents/drivers/u300: Migrate to new 'set-state' interface Migrate u300 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-18 16:24:52 +05:30
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: fix timekeeping when periodic mode is used To determine the value to write to the hardware's timer counter register the symbol CLOCK_TICK_RATE is used. This value is a dummy value on u300 though. So instead use the clock rate that is used for oneshot mode. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-05 10:03:19 +01:00
clockevents/drivers/u300: Migrate to new 'set-state' interface Migrate u300 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-18 16:24:52 +05:30
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: fix timekeeping when periodic mode is used To determine the value to write to the hardware's timer counter register the symbol CLOCK_TICK_RATE is used. This value is a dummy value on u300 though. So instead use the clock rate that is used for oneshot mode. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-05 10:03:19 +01:00
clockevents/drivers/u300: Migrate to new 'set-state' interface Migrate u300 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-18 16:24:52 +05:30
ARM: u300: fix timekeeping when periodic mode is used To determine the value to write to the hardware's timer counter register the symbol CLOCK_TICK_RATE is used. This value is a dummy value on u300 though. So instead use the clock rate that is used for oneshot mode. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-05 10:03:19 +01:00
clockevents/drivers/u300: Migrate to new 'set-state' interface Migrate u300 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-18 16:24:52 +05:30
ARM: u300: fix timekeeping when periodic mode is used To determine the value to write to the hardware's timer counter register the symbol CLOCK_TICK_RATE is used. This value is a dummy value on u300 though. So instead use the clock rate that is used for oneshot mode. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-05 10:03:19 +01:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: fix timekeeping when periodic mode is used To determine the value to write to the hardware's timer counter register the symbol CLOCK_TICK_RATE is used. This value is a dummy value on u300 though. So instead use the clock rate that is used for oneshot mode. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-05 10:03:19 +01:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
mach-u300: cleanup clockevent code Use the new clockevents_config_and_register() function to register the U300 clockevent, since that code requires ->cpumask to be set we set this even on this UP system to please the framework. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-30 15:51:47 +02:00
ARM: 8000/1: misc: remove deprecated IRQF_DISABLED This patch removes the use of the IRQF_DISABLED flag from miscellaneous code in mach-xxx and plat-xxx This flag is a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-04 22:04:50 +01:00
mach-u300: cleanup clockevent code Use the new clockevents_config_and_register() function to register the U300 clockevent, since that code requires ->cpumask to be set we set this even on this UP system to please the framework. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-30 15:51:47 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: 5704/1: U300 sched_clock implementation v2 This adds the long debated sched_clock() override for the weak in-kernel jiffybased sched_clock(). The implementation is more or less identical to the one used in arch/arm/plat-omap/common.c and at last attempt to merge this the merge was postponed at the request of Peter Zijlstra due to pending discussions regarding generalized clocksource-based sched_clock() implementations by adding a flag to the clocksource. However that discussion ended up with the generic code needing to be rewritten and Paul Mundt see no reason not to proceed with this for the time being as it can be easily converted once the generic code is in place. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-17 13:10:50 +01:00
ARM: u300: convert sched_clock() to use new infrastructure Convert u300 to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-15 21:50:14 +00:00
ARM: u300: Switch to sched_clock_register() The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-11-15 15:26:21 -08:00
ARM: 5704/1: U300 sched_clock implementation v2 This adds the long debated sched_clock() override for the weak in-kernel jiffybased sched_clock(). The implementation is more or less identical to the one used in arch/arm/plat-omap/common.c and at last attempt to merge this the merge was postponed at the request of Peter Zijlstra due to pending discussions regarding generalized clocksource-based sched_clock() implementations by adding a flag to the clocksource. However that discussion ended up with the generic code needing to be rewritten and Paul Mundt see no reason not to proceed with this for the time being as it can be easily converted once the generic code is in place. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-17 13:10:50 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
ARM: 5704/1: U300 sched_clock implementation v2 This adds the long debated sched_clock() override for the weak in-kernel jiffybased sched_clock(). The implementation is more or less identical to the one used in arch/arm/plat-omap/common.c and at last attempt to merge this the merge was postponed at the request of Peter Zijlstra due to pending discussions regarding generalized clocksource-based sched_clock() implementations by adding a flag to the clocksource. However that discussion ended up with the generic code needing to be rewritten and Paul Mundt see no reason not to proceed with this for the time being as it can be easily converted once the generic code is in place. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-17 13:10:50 +01:00
ARM: u300: enable delaytimer on the U300 The U300 can support timer-based delays, so implement this. Skips past jiffy calibration. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-05 22:45:11 +02:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
ARM: u300: enable delaytimer on the U300 The U300 can support timer-based delays, so implement this. Skips past jiffy calibration. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-05 22:45:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
clocksource/drivers/u300: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-06 23:29:18 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
of/irq: Use irq_of_parse_and_map() Replace some instances of of_irq_map_one()/irq_create_of_mapping() and of_irq_to_resource() by the simpler equivalent irq_of_parse_and_map(). Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> [grant.likely: resolved conflicts with core code renames] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-09-18 15:24:44 +02:00
ARM: 6296/1: clock U300 intcon and timer properly This removes the quirks to clock the U300 VIC and timer by custom hooks and moves the control out to the clock framework where it belongs. This is possible now that clocks are available early. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-05 07:58:58 +01:00
ARM: 6297/1: move U300 timer to dynamic clock lookup This moves the U300 timer code to look up its clock rate from the clock framework as is apropriate and also switches it over to use the generic code for *calc_mult_shift() on clock source and clock event. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-05 07:59:54 +01:00
clocksource/drivers/u300: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-06 23:29:18 +02:00
ARM: 6296/1: clock U300 intcon and timer properly This removes the quirks to clock the U300 VIC and timer by custom hooks and moves the control out to the clock framework where it belongs. This is possible now that clocks are available early. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-05 07:58:58 +01:00
ARM: u300: delete all static board data We have now transferred all the U300 peripherals to the device tree, so we just select USE_OF, and delete all static board data, then require that this platform shall be booted using the device tree and nothing else. This gets rid of the MMCI (PL180), PL022, and serial PL011 platform data entries and more. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-22 11:29:30 +02:00
clocksource/drivers/u300: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-06 23:29:18 +02:00
ARM: u300: delete all static board data We have now transferred all the U300 peripherals to the device tree, so we just select USE_OF, and delete all static board data, then require that this platform shall be booted using the device tree and nothing else. This gets rid of the MMCI (PL180), PL022, and serial PL011 platform data entries and more. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-22 11:29:30 +02:00
of/irq: Use irq_of_parse_and_map() Replace some instances of of_irq_map_one()/irq_create_of_mapping() and of_irq_to_resource() by the simpler equivalent irq_of_parse_and_map(). Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> [grant.likely: resolved conflicts with core code renames] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-09-18 15:24:44 +02:00
clocksource/drivers/u300: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-06 23:29:18 +02:00
ARM: u300: delete all static board data We have now transferred all the U300 peripherals to the device tree, so we just select USE_OF, and delete all static board data, then require that this platform shall be booted using the device tree and nothing else. This gets rid of the MMCI (PL180), PL022, and serial PL011 platform data entries and more. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-22 11:29:30 +02:00
of/irq: Use irq_of_parse_and_map() Replace some instances of of_irq_map_one()/irq_create_of_mapping() and of_irq_to_resource() by the simpler equivalent irq_of_parse_and_map(). Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> [grant.likely: resolved conflicts with core code renames] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-09-18 15:24:44 +02:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
ARM: 6296/1: clock U300 intcon and timer properly This removes the quirks to clock the U300 VIC and timer by custom hooks and moves the control out to the clock framework where it belongs. This is possible now that clocks are available early. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-05 07:58:58 +01:00
ARM: u300: move the gated system controller clocks to DT This moves the slow, fast, AHB bridge and "rest" clocks on the U300 system controller over to registration from the device tree. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-23 15:42:33 +02:00
clocksource/drivers/u300: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-06 23:29:18 +02:00
ARM: 6297/1: move U300 timer to dynamic clock lookup This moves the U300 timer code to look up its clock rate from the clock framework as is apropriate and also switches it over to use the generic code for *calc_mult_shift() on clock source and clock event. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-05 07:59:54 +01:00
ARM: 6296/1: clock U300 intcon and timer properly This removes the quirks to clock the U300 VIC and timer by custom hooks and moves the control out to the clock framework where it belongs. This is possible now that clocks are available early. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-05 07:58:58 +01:00
ARM: u300: fix timekeeping when periodic mode is used To determine the value to write to the hardware's timer counter register the symbol CLOCK_TICK_RATE is used. This value is a dummy value on u300 though. So instead use the clock rate that is used for oneshot mode. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-05 10:03:19 +01:00
ARM: u300: Switch to sched_clock_register() The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-11-15 15:26:21 -08:00
ARM: u300: convert sched_clock() to use new infrastructure Convert u300 to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-15 21:50:14 +00:00
ARM: u300: enable delaytimer on the U300 The U300 can support timer-based delays, so implement this. Skips past jiffy calibration. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-05 22:45:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
clocksource/drivers/u300: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-06 23:29:18 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
clocksource: convert ARM 32-bit up counting clocksources Convert ixp4xx, lpc32xx, mxc, netx, pxa, sa1100, tcc8k, tegra and u300 to use the generic mmio clocksource recently introduced. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: "Hans J. Koch" <hjk@hansjkoch.de> Acked-by: Colin Cross <ccross@android.com> Cc: Erik Gilling <konkers@android.com> Cc: Olof Johansson <olof@lixom.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-08 14:09:47 +01:00
clocksource/drivers/u300: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-06 23:29:18 +02:00
ARM: 6947/2: mach-u300: fix compilation error in timer The introduction of the mmio timer accidentally referenced the old clocksource struct which does not exist anymore. Fix this by using a simple string instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-31 22:10:03 +01:00
clocksource/drivers/u300: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-06 23:29:18 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
mach-u300: cleanup clockevent code Use the new clockevents_config_and_register() function to register the U300 clockevent, since that code requires ->cpumask to be set we set this even on this UP system to please the framework. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-30 15:51:47 +02:00
ARM: u300: fix timekeeping when periodic mode is used To determine the value to write to the hardware's timer counter register the symbol CLOCK_TICK_RATE is used. This value is a dummy value on u300 though. So instead use the clock rate that is used for oneshot mode. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-05 10:03:19 +01:00
mach-u300: cleanup clockevent code Use the new clockevents_config_and_register() function to register the U300 clockevent, since that code requires ->cpumask to be set we set this even on this UP system to please the framework. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-30 15:51:47 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
clocksource/drivers/u300: Convert init function to return error The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-06 23:29:18 +02:00
[ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-23 10:22:13 +01:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00
clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-26 16:56:11 +02:00
ARM: u300: device tree support for the timer This adds device tree support for the U300 timer, by making the memory base offset and IRQ dynamically assigned, then optionally looking them up from the device tree. Since the timer needs to be registered before any platform devices are created, we will go into the device tree and look up the "/timer@c0014000" node and read our base address and IRQ from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 10:50:11 +02:00